first attempt at adding Main_update_shift_registers

1 files changed, 88 insertions, 0 deletions

diff --git a/device-functions.c b/device-functions.c
index 1b2a888..6a54241 100644
--- a/device-functions.c
+++ b/device-functions.c
@@ -4534,3 +4534,91 @@ void Set_Sav(int setting_num)
 
 	return;
 }
+
+
+void Main_update_shift_registers()
+{
+	/* send MSB first, LSB last */
+	/* send highest # SR first */
+
+	int store_trigger_mode[max_channels];
+	int i,j,n;	  /* counters */
+	char data_out;
+	int temp_output_state[max_channels];
+
+	/* suppress triggering during relay switching */
+	if (	globals.Registers.last_relay_driver_settings[0]!=globals.Registers.shift_reg_out[2]
+	        || globals.Registers.last_relay_driver_settings[1]!=globals.Registers.shift_reg_out[3]) {
+		start_gate_override ();
+	}
+
+
+	/* physically turn off output for amplitude range changes */
+	/* i.e., short output in 155's */
+	if (globals.Flags.force_output_fully_off==YES)
+		for (i=0; i<(globals.Flash.ChanKey_frequency?globals.Flash.channels:1); ++i) {
+			temp_output_state[i]=globals.ChannelState[i].output_state;
+			Set_Output_State(i,output_off);
+			g_usleep (1e3 * globals.Timers.normal_relay_bounce_time_in_milliseconds);
+		}
+
+	bus_setpin(out_CLOCK_LINE, 1);
+        bus_setpin(out_STROBE_LINE, 0);
+
+	for (i=(num_out_SRs-1); i>=0; --i) {
+		switch (i) {
+		case 0:
+		case 1:
+			n=8;
+			break;
+		case 2:
+		case 3:
+			n=20;			/* 20 bit shift registers - UCN5812s */
+			break;
+		}
+
+		for (j=n-1; j>=0; --j) {	/* send MSB first, LSB last */
+			bus_setpin(out_CLOCK_LINE, 0);
+			data_out = (char) (1 & (globals.Registers.shift_reg_out[i]>>j));
+			bus_setpin(out_DATA_LINE, data_out);
+			bus_setpin(out_CLOCK_LINE, 1);
+		}
+	}
+
+	bus_setpin(out_STROBE_LINE, 1);		// latch the data
+	bus_setpin(out_STROBE_LINE, 0);		// release latch
+
+	for (i=0; i<8; ++i) {
+		/* load the upper-nibble latch */
+		bus_writebyte ((uint8_t) (Octal_DACportCS_high), (uint8_t) (globals.Registers.parallel_DAC_reg[i]  >> 8));
+
+		/* write lower byte (with address data), and force transfer of latched nibble */
+		bus_writebyte ((uint8_t) (Octal_DACportCS_low + i), (uint8_t) (globals.Registers.parallel_DAC_reg[i] & 255));
+	}
+
+	/* keep trigger suppressed for a time (normally 5ms) after a relay update */
+	if (	globals.Registers.last_relay_driver_settings[0]!=globals.Registers.shift_reg_out[2]
+	        || globals.Registers.last_relay_driver_settings[1]!=globals.Registers.shift_reg_out[3]
+	        || globals.Flags.force_output_fully_off==YES) {
+		g_usleep (1e3 * globals.Timers.Relay_Switching_Delay_in_Milliseconds);
+	}
+
+
+	/* restore output if required */
+	if (globals.Flags.force_output_fully_off==YES)
+		for (i=0; i<(globals.Flash.ChanKey_frequency?globals.Flash.channels:1); ++i) {
+			Set_Output_State(i,temp_output_state[i]);
+			g_usleep (1e3 * globals.Timers.normal_relay_bounce_time_in_milliseconds);
+			globals.Flags.force_output_fully_off=NO;
+		}
+
+	stop_gate_override ();
+
+	globals.Timers.Relay_Switching_Delay_in_Milliseconds=globals.Timers.normal_relay_bounce_time_in_milliseconds;
+	/* restore default delay */
+
+	/* save relay data for comparision next time */
+	globals.Registers.last_relay_driver_settings[0]=globals.Registers.shift_reg_out[2];
+	globals.Registers.last_relay_driver_settings[1]=globals.Registers.shift_reg_out[3];
+}
+