implement ampl-dependent arbitrary voltage output - for AVR-E5-B S/N 13618

1 files changed, 35 insertions, 27 deletions

diff --git a/device-functions.c b/device-functions.c
index 1cc4322..4e21c14 100644
--- a/device-functions.c
+++ b/device-functions.c
@@ -250,7 +250,7 @@ static int attenuator_count (int channel)
 int Set_Amplitude(int check_possible_only,int pol_override,int override_on,int word_override,int range_override,
                   int switch_range_only,int channel,float new_ampl,int called_from_set_pw)
 {
-	int word_out;	  /* what is sent to the DAC */
+	int word_out, word_out_aux;	  /* what is sent to the DAC */
 	int relay_range,atten_range,old_range,old_actual_pol;	  /* selects relay range */
 	int UseNegData;	/* if polarity is negative and separate piece-wise linear data is available for neg */
 	int point_found;
@@ -307,7 +307,7 @@ int Set_Amplitude(int check_possible_only,int pol_override,int override_on,int w
 
 		/* determine the previous relay range */
 		Set_VI_Control(pwl_ampl_values,channel,globals.ChannelState[channel].amplitude,&point_found,
-		               &old_range,&atten_range,&UseNegData,&entry,&word_out,&old_actual_pol);
+		               &old_range,&atten_range,&UseNegData,&entry,&word_out,&old_actual_pol,NULL);
 	}
 
 	word_out = -1;
@@ -324,7 +324,7 @@ int Set_Amplitude(int check_possible_only,int pol_override,int override_on,int w
 		/* set the amplitude controls now. */
 		int status;
 		if ((status=Set_VI_Control(pwl_ampl_values,channel,new_ampl,&point_found,
-		                           &relay_range,&atten_range,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&atten_range,&UseNegData,&entry,&word_out,&actual_pol,&word_out_aux))) {
 			return status;
 		}
 	}
@@ -349,10 +349,13 @@ int Set_Amplitude(int check_possible_only,int pol_override,int override_on,int w
 		globals.Timers.Relay_Switching_Delay_in_Milliseconds=(long) (1000L * globals.Flash.extended_relay_delay_in_sec);
 	}
 
+	if (globals.Flash.distort_enabled[channel]) {
+		printf ("distort %d\n",word_out_aux);
+		set_dac(globals.Flash.distort_dac[channel],word_out_aux);
+	}
 
 	set_dac(globals.Flash.ampl_DAC[channel],word_out);
 
-
 	if (!channel) {
 		if (!globals.Flash.ampl_ranges_for_ch2_only) {
 			if ((globals.Flash.ChanKey_amplitude?globals.Flash.channels:1)<=1) {
@@ -509,7 +512,7 @@ int Set_Pw(int check_possible_only,int word_override,int range_override,int chan
 	} else {
 		/* set the pw controls now. */
 		if ((status=Set_VI_Control(pwl_pw_values,channel,set_pw,&point_found,
-		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 			return status;
 		}
 	}
@@ -621,7 +624,7 @@ int Set_Pw(int check_possible_only,int word_override,int range_override,int chan
 	/* use CH2 calibration to do this */
 	if (globals.Flash.is_monocycle[0] && channel==0) {
 		if ((status=Set_VI_Control(pwl_pw_values,1,set_pw,&point_found,
-		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 			return status;
 		}
 		set_dac(globals.Flash.monocycle_dac[0],word_out);
@@ -672,7 +675,7 @@ int Set_Offset(int check_possible_only,int override_on,int word_override,int ran
 
 		/* determine the previous relay range */
 		Set_VI_Control(pwl_os_values,channel,globals.ChannelState[channel].offset,&point_found,
-		               &old_range,&dummy0,&dummy1,&dummy2,&word_out,&dummy3);
+		               &old_range,&dummy0,&dummy1,&dummy2,&word_out,&dummy3,NULL);
 	}
 
 	if (override_on) {
@@ -681,7 +684,7 @@ int Set_Offset(int check_possible_only,int override_on,int word_override,int ran
 	} else {
 		int status;
 		if ((status=Set_VI_Control(pwl_os_values,channel,new_offset,&point_found,
-		                           &relay_range,&dummy0,&dummy2,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy0,&dummy2,&entry,&word_out,&actual_pol,NULL))) {
 			return status;
 		}
 	}
@@ -757,7 +760,7 @@ int Set_frequency(int check_possible_only,int word_override,int range_override,i
 		/* added Feb 23/05 */
 		/* determine the previous relay range */
 		Set_VI_Control(pwl_period_values,channel,1.0/globals.ChannelState[channel].frequency,&point_found,
-		               &old_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol);
+		               &old_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL);
 	}
 
 	/* find appropriate range/fine settings from piece-wise linear data in flash memory */
@@ -768,7 +771,7 @@ int Set_frequency(int check_possible_only,int word_override,int range_override,i
 		/* set the amplitude controls now. */
 		int status;
 		if ((status=Set_VI_Control(pwl_period_values,channel,1.0/set_freq,&point_found,
-		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 			return status;
 		}
 	}
@@ -911,7 +914,7 @@ int Set_Delay(int check_possible_only,int word_override,int range_override,int c
 		/* set the amplitude controls now. */
 		int status;
 		if ((status=Set_VI_Control(pwl_delay_values,channel,setting,&point_found,
-		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 			g_print_debug("delay set status: %d",status);
 			return status;
 		}
@@ -1678,7 +1681,7 @@ int Set_Amp_Calib(int channel,float meas_ampl)
 
 	/* get current range and polarity settings */
 	Set_VI_Control(pwl_ampl_values,channel,globals.ChannelState[channel].amplitude,&point_found,
-	               &relay_range,&atten_range,&UseNegData,&entry,&word_out,&actual_pol);
+	               &relay_range,&atten_range,&UseNegData,&entry,&word_out,&actual_pol,NULL);
 
 	if (fabs(globals.ChannelState[channel].amplitude)<globals.Flash.ampl_zero_equiv[channel]) {
 		return NeedNonZeroAmpl;
@@ -1721,7 +1724,7 @@ int Set_Mon_Calib(int channel,float meas_ampl)
 
 	/* get current range and polarity settings */
 	Set_VI_Control(pwl_ampl_values,channel,globals.ChannelState[channel].amplitude,&point_found,
-	               &relay_range,&atten_range,&UseNegData,&entry,&word_out,&actual_pol);
+	               &relay_range,&atten_range,&UseNegData,&entry,&word_out,&actual_pol,NULL);
 
 	if (fabs(globals.ChannelState[channel].Curr_Mon_value)< (5.0 * globals.Flash.monitor_step[channel])) {
 		return NeedNonZeroAmpl;
@@ -2548,7 +2551,7 @@ int Set_VI_Del_Cal(int parameter,int channel,int calibration_point_number)
 
 static int linear_interpolation (int x1, int x2, float y1, float y2, float y_need)
 {
-	if ((y2 == y1) || (x2 == x1)) {
+	if (y2 == y1) {
 		return -1;
 	}
 
@@ -2577,7 +2580,7 @@ static int inverse_interpolation (int x1, int x2, float y1, float y2, float y_ne
 
 
 int Set_VI_Control(int parameter,int channel,float new_ampl,int *point_found,int *relay_range,int *atten_range,
-                   int *UseNegData,int *entry,int *word_out,int *actual_pol)
+                   int *UseNegData,int *entry,int *word_out,int *actual_pol,int *word_out_aux)
 {
 	float use_ampl,tweaked_use_ampl;
 	int i;
@@ -2587,6 +2590,8 @@ int Set_VI_Control(int parameter,int channel,float new_ampl,int *point_found,int
 	int max_points,max_polarity,max_ranges;
 	float *pwl;
 	short *pwl_dacval;
+	short *pwl_dacval_aux;	/* a second coupled set of dac values, for distort output */
+
 	int index,use_range;
 	int range_i,entry_i;
 	int pw_polarity;
@@ -2612,7 +2617,6 @@ int Set_VI_Control(int parameter,int channel,float new_ampl,int *point_found,int
 	min_os_in_range=max_os_in_range=0.0;
 	min_ampl_in_range=max_ampl_in_range=0.0;
 
-
 	switch (parameter) {
 	case pwl_ampl_values:
 
@@ -2623,6 +2627,7 @@ int Set_VI_Control(int parameter,int channel,float new_ampl,int *point_found,int
 		max_polarity=ampl_polarities;
 		max_ranges=ampl_ranges;
 		pwl_dacval=&globals.Flash.ampl_dacval[0][0][0][0];
+		pwl_dacval_aux=&globals.Flash.distort_dacval[0][0][0][0];
 		pwl=&globals.Flash.ampl_pwl[0][0][0][0];
 		if (new_ampl<0.0) {
 			*actual_pol=1;
@@ -2953,6 +2958,9 @@ int Set_VI_Control(int parameter,int channel,float new_ampl,int *point_found,int
 						*word_out = inverse_interpolation (pwl_dacval[index], pwl_dacval[index+1], pwlamp1, pwlamp2, tweaked_use_ampl);
 					} else {
 						*word_out = linear_interpolation (pwl_dacval[index], pwl_dacval[index+1], pwlamp1, pwlamp2, tweaked_use_ampl);
+						if (pwl_dacval_aux && word_out_aux) {
+							*word_out_aux = linear_interpolation (pwl_dacval_aux[index], pwl_dacval_aux[index+1], pwlamp1, pwlamp2, tweaked_use_ampl);
+						}
 					}
 				}
 			}
@@ -3065,7 +3073,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.ampl_pwl);
 
 		Set_VI_Control(pwl_ampl_values,channel,globals.ChannelState[channel].amplitude,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		old_val=globals.ChannelState[channel].amplitude;
 		abs_cal_point=fabs(cal_point);	/* ampl data is positive always */
 
@@ -3086,7 +3094,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 
 		old_val=globals.ChannelState[channel].offset;
 		Set_VI_Control(pwl_os_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 	case pwl_pw_values:
 		max_polarity=timing_polarities;
@@ -3097,7 +3105,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.pw_pwl);
 		old_val=globals.ChannelState[channel].pw;
 		Set_VI_Control(pwl_pw_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 	case pwl_delay_values:
 		max_polarity=timing_polarities;
@@ -3108,7 +3116,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.delay_pwl);
 		old_val=globals.ChannelState[channel].delay;
 		Set_VI_Control(pwl_delay_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 	case pwl_period_values:
 		max_polarity=timing_polarities;
@@ -3119,7 +3127,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.period_pwl);
 		old_val=1.0/globals.ChannelState[channel].frequency;
 		Set_VI_Control(pwl_period_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 	case pwl_burst_values:
 		max_polarity=timing_polarities;
@@ -3130,7 +3138,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.burst_pwl);
 		old_val=globals.ChannelState[channel].burst_time;
 		Set_VI_Control(pwl_burst_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 	case pwl_rise_time_values:
 		max_polarity=ampl_polarities;
@@ -3141,7 +3149,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.rise_time_pwl);
 		old_val=globals.ChannelState[channel].rise_time;
 		Set_VI_Control(pwl_rise_time_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 	case pwl_slew_values:
 		max_polarity=timing_polarities;
@@ -3152,7 +3160,7 @@ int Set_VI_Add_Cal(int parameter,int channel,float cal_point)
 		size_of_y_float=sizeof(globals.Flash.slew_pwl);
 		old_val=globals.ChannelState[channel].slew;
 		Set_VI_Control(pwl_slew_values,channel,old_val,&point_found,
-		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol);
+		               &range,&atten_range,&polarity,&entry,&word_out,&actual_pol,NULL);
 		break;
 
 	}
@@ -3593,7 +3601,7 @@ int Set_Burst_Time(int check_possible_only,int word_override,int range_override,
 	} else {
 		int status;
 		if ((status=Set_VI_Control(pwl_burst_values,channel,new_burst_time,&point_found,
-		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 			return status;
 		}
 	}
@@ -3700,7 +3708,7 @@ int Set_rise_time(int check_possible_only,int word_override,int range_override,i
 		} else {
 			int status;
 			if ((status=Set_VI_Control(pwl_rise_time_values,channel,new_rise_time,&point_found,
-						   &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+						   &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 				return status;
 			}
 		}
@@ -3876,7 +3884,7 @@ int Set_slew(int check_possible_only,int word_override,int range_override,int ch
 		relay_range=range_override;
 	} else {
 		if ((status=Set_VI_Control(pwl_slew_values,channel,new_slew,&point_found,
-		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol))) {
+		                           &relay_range,&dummy,&UseNegData,&entry,&word_out,&actual_pol,NULL))) {
 			return status;
 		}
 	}