ran dos2unix

1 files changed, 502 insertions, 502 deletions

diff --git a/error_utils.c b/error_utils.c
index 73d2999..c4eae61 100644
--- a/error_utils.c
+++ b/error_utils.c
@@ -1,502 +1,502 @@
-/* START LIBRARY DESCRIPTION *********************************************

-ERRCHK.LIB

-	Copyright (c) 2006, Avtech Electrosystems Ltd.

-

-DESCRIPTION:

-	Error-checking and reporting functions.

-

-SUPPORT LIB'S:

-END DESCRIPTION **********************************************************/

-

-

-/*** BeginHeader Error_check */

-

-#include <string.h>

-#include <glib/gprintf.h>

-#include "globals.h"

-#include "dummy_functions.h"

-#include "lcd.h"

-

-/*** EndHeader */

-

-/* FIXME */

-int Error_Screen=NO;

-

-void set_gpib_error_flags (int error_num);

-

-void set_gpib_error_flags (int error_num)

-{

-

-	if (error_num == OK) {

-		return;

-	}

-

-	/* set the error flags in the GPIB ESR register right away */

-	switch (error_num) {

-	case AsyncModeDisabled:

-	case Unrecognized:

-	case SyntaxError:

-	case UnknownUnits:

-	case InvalidChannel:

-		GPIB_Set_Command_Error();

-		break;

-	case query_error_interrupted:

-	case query_error_unterminated:

-		GPIB_Set_Query_Error();

-		break;

-	case Overload_Detected:

-	case Overtemp_Detected:

-	case Overvolt_Detected:

-	case Device_Specific_Aux_Error_Detected:

-	case queue_overflow:

-	case CalibrationPercentError:

-	case CalibrationZeroError:

-	case CalibrationMinMaxError:

-	case CalibrationClosenessError:

-	case CalibrationRangeError:

-	case CalibrationPolarityError:

-	case Soft_Limit_Exceeded:

-	case SelfCalError:

-		GPIB_Set_Device_Dependent_Error();

-		break;

-	default:

-		GPIB_Set_Execution_Error();

-		break;

-	}

-

-	return;

-}

-

-void queue_error(int error_num);

-

-void queue_error(int error_num)

-{

-	if (error_num == OK) {

-		return;

-	}

-

-	set_gpib_error_flags (error_num);

-	if (globals.number_of_errors<error_queue_length) {

-		++globals.number_of_errors;

-		globals.error_queue[globals.number_of_errors]=error_num;

-	} else {

-		globals.error_queue[globals.number_of_errors]=queue_overflow;

-	}

-

-	return;

-}

-

-

-

-/*----------------------------------------------------------------------------------------------------------*/

-void queue_error_and_get_text(gchar** response, int error_num)

-{

-	g_assert (*response == NULL);

-

-	if (error_num == OK) {

-		return;

-	}

-	queue_error (error_num);

-	get_error_text (response, error_num);

-	return;

-}

-

-/*----------------------------------------------------------------------------------------------------------*/

-void queue_error_from_parser(gchar** response, int error_num)

-{

-	g_assert (*response == NULL);

-

-	if (error_num == OK) {

-		return;

-	}

-	queue_error_and_get_text(response, error_num);

-	Menu_Refresh();

-	return;

-}

-

-

-void queue_error_for_gpib_only(int error_num);

-

-void queue_error_for_gpib_only(int error_num)

-{

-// not part of this project, but left in for coder's reference. Can be deleted for now

-	if (error_num == OK) {

-		return;

-	}

-	queue_error(error_num);

-	return;

-}

-

-

-void queue_error_and_display_on_LCD(int error_num);

-

-void queue_error_and_display_on_LCD(int error_num)

-{

-	gchar* response = NULL;

-	queue_error_and_get_text(&response, error_num);

-	LCD_display_error_message (response);

-}

-

-

-void queue_and_broadcast_sensor_alarm(int error_num);

-

-void queue_and_broadcast_sensor_alarm(int error_num)

-{

-// not part of this project, but left in for coder's reference. Can be deleted for now

-}

-

-/*----------------------------------------------------------------------------------------------------------*/

-void Error_Remove_From_Queue(void)

-{

-	int i;

-	for (i=1; i<globals.number_of_errors; ++i) {

-		globals.error_queue[i]=globals.error_queue[i+1];

-	}

-	--globals.number_of_errors; 	/* error reported, so remove it from the error queue */

-}

-

-

-void format_error_text (gchar **response, int error_type, char *in);

-

-void format_error_text (gchar **response, int error_type, char *in)

-{

-	char* prefix = NULL;

-

-	switch (error_type) {

-	case 0:

-		prefix = g_strdup("No error");

-		break;

-	case -100:

-		prefix=g_strdup("Command error");

-		break;

-	case -102:

-		prefix=g_strdup("Syntax error");

-		break;

-	case -114:

-		prefix=g_strdup("Command error");

-		break;

-	case -131:

-		prefix=g_strdup("Invalid suffix");

-		break;

-	case -200:

-		prefix=g_strdup("Execution error");

-		break;

-	case -221:

-		prefix=g_strdup("Settings conflict");

-		break;

-	case -222:

-		prefix=g_strdup("Data out of range");

-		break;

-	case -224:

-		prefix=g_strdup("Illegal parameter value");

-		break;

-	case -240:

-		prefix=g_strdup("Hardware error");

-		break;

-	case -300:

-		prefix=g_strdup("Device-specific error");

-		break;

-	case -340:

-		prefix=g_strdup("Calibration failed");

-		break;

-	case -350:

-		prefix=g_strdup("Queue overflow");

-		break;

-	case -400:

-		prefix=g_strdup("Query error");

-		break;

-	default:

-		prefix=g_strdup("System error");

-		break;

-	}

-

-

-	*response = g_strdup_printf("%d, \"%s; %s\"", error_type, prefix, in);

-	g_free(prefix);

-}

-

-

-void get_error_text(gchar **response, int error_num)

-{

-	switch (error_num) {

-

-	case OK:

-		format_error_text(response,0,"");

-		break;

-

-	case Unrecognized:

-		format_error_text(response,-102,"Unrecognized command.");

-		break;

-

-	case AsyncModeDisabled:

-		format_error_text(response,-102,"Async gating not available.");

-		break;

-

-	case SyntaxError:

-		format_error_text(response,-100,"Recognized command, but improper syntax.");

-		break;

-

-	case InvalidChannel:

-		format_error_text(response,-114,"Invalid channel suffix.");

-		break;

-

-	case OutOfRange:

-		format_error_text(response,-222,"Too high or too low.");

-		break;

-

-	case Negative_Not_Allowed:

-		format_error_text(response,-222,"Negative value not allowed.");

-		break;

-

-	case IllegalParameter:

-	case amplitude_confined_values:

-		format_error_text(response,-224,"Not in list of allowed values.");

-		break;

-

-	case UnknownUnits:

-		format_error_text(response,-131,"Unrecognized units.");

-		break;

-

-	case Route_Range_Error:

-		format_error_text(response,-224,"Ranges are not supported.");

-		break;

-

-	case AB_Mode_Error:

-		format_error_text(response,-221,"This PW mode is not valid for the current trigger mode.");

-		break;

-

-	case Valid_For_RS232_TELNET_Only:

-		format_error_text(response,-221,"Command valid in RS232 or TELNET modes only.");

-		break;

-

-	case PW_Exceeds_Period:

-		format_error_text(response,-221,"PW can not exceed period.");

-		break;

-

-	case Delay_Exceeds_95Period:

-		format_error_text(response,-221,"Delay can not exceed 95% of period.");

-		break;

-

-	case NeedNonZeroAmpl:

-		format_error_text(response,-222,"Amplitude must be non-zero.");

-		break;

-

-	case freq_lower_limit:

-		format_error_text(response,-222,"PRF too low.");

-		break;

-

-	case freq_upper_limit:

-		format_error_text(response,-222,"PRF too high.");

-		break;

-

-	case pw_lower_limit:

-		format_error_text(response,-222,"PW too low.");

-		break;

-

-	case pw_upper_limit:

-		format_error_text(response,-222,"PW too high.");

-		break;

-

-	case max_rise_time_error:

-		format_error_text(response,-222,"Rise time too high.");

-		break;

-

-	case min_rise_time_error:

-		format_error_text(response,-222,"Rise time too low.");

-		break;

-

-	case max_slew_error:

-		format_error_text(response,-222,"Slew rate too high.");

-		break;

-

-	case min_slew_error:

-		format_error_text(response,-222,"Slew rate too low.");

-		break;

-

-	case max_load_type_error:

-		format_error_text(response,-222,"Resistance too high.");

-		break;

-

-	case min_load_type_error:

-		format_error_text(response,-222,"Duty cycle too high or load resistance too low.");

-		break;

-

-	case max_soft_current_limit_error:

-		format_error_text(response,-222,"Current limit too high.");

-		break;

-

-	case min_soft_current_limit_error:

-		format_error_text(response,-222,"Current limit too low.");

-		break;

-

-	case duty_cycle_upper_limit:

-		format_error_text(response,-222,"Duty cycle too high.");

-		break;

-

-	case Average_Amplitude_Too_High:

-		format_error_text(response,-222,"Average amplitude too high.");

-		break;

-

-	case delay_lower_limit:

-		format_error_text(response,-222,"Delay too low.");

-		break;

-

-	case delay_upper_limit:

-		format_error_text(response,-222,"Delay too high.");

-		break;

-

-	case amplitude_lower_limit:

-		format_error_text(response,-222,"Amplitude too low.");

-		break;

-

-	case amplitude_upper_limit:

-		format_error_text(response,-222,"Amplitude too high.");

-		break;

-

-	case peak_power_limit:

-		format_error_text(response,-222,"Peak power too high.");

-		break;

-

-	case average_power_limit:

-		format_error_text(response,-222,"Average power too high.");

-		break;

-

-	case offset_lower_limit:

-		format_error_text(response,-222,"Offset too low.");

-		break;

-

-	case offset_upper_limit:

-		format_error_text(response,-222,"Offset too high.");

-		break;

-

-	case ampl_plus_os_lower_limit:

-		format_error_text(response,-222,"AMPL+OS too low.");

-		break;

-

-	case ampl_plus_os_upper_limit:

-		format_error_text(response,-222,"AMPL+OS too high.");

-		break;

-

-	case DutyTriggerError:

-		format_error_text(response,-221,"Duty cycle can not be set. Set PW instead.");

-		break;

-

-	case PW_Exceeds_Double_Separation:

-		format_error_text(response,-221,"PW can not exceed double pulse separation.");

-		break;

-

-	case Double_Separation_Too_Large:

-		format_error_text(response,-221,"Double pulse separation is too high. It must be < 95% of the period.");

-		break;

-

-	case queue_overflow:

-		format_error_text(response,-350,"Clear with *cls or syst:err.");

-		break;

-

-	case query_error_interrupted:

-		format_error_text(response,-400,"Data lost in output buffer.");

-		break;

-

-	case query_error_unterminated:

-		format_error_text(response,-400,"No data to send.");

-		break;

-

-	case Overload_Detected:

-		format_error_text(response,-300,"Power supply overload detected. The output has been turned off.");

-		break;

-

-	case Overtemp_Detected:

-		format_error_text(response,-300,"Overheating problem. The output has been turned off.");

-		break;

-

-	case Overvolt_Detected:

-		format_error_text(response,-300,"Over-voltage or over-current! The output has been turned off.");

-		break;

-

-	case Soft_Limit_Exceeded:

-		format_error_text(response,-300,"Monitor current limit exceeded! The output has been turned off.");

-		break;

-

-	case Device_Specific_Aux_Error_Detected:

-		// replace with "FIXME" if Flash not implemented yet

-		format_error_text(response,-300,globals.Flash.aux_error_message);

-		break;

-

-	case CalibrationPercentError:

-		format_error_text(response,-340,"Percent change is too large.");

-		break;

-

-	case CalibrationPolarityError:

-		format_error_text(response,-340,"Old and new polarities disagree.");

-		break;

-

-	case CalibrationZeroError:

-		format_error_text(response,-340,"Zero point can not be changed.");

-		break;

-

-	case CalibrationMinMaxError:

-		format_error_text(response,-340,"Would prevent operation at the minimum or maximum settings.");

-		break;

-

-	case CalibrationClosenessError:

-		format_error_text(response,-340,"Too few calibration points, or they are too closely spaced.");

-		break;

-

-	case CalibrationRangeError:

-		format_error_text(response,-340,"Top or bottom of range. Can not be deleted.");

-		break;

-

-	case SelfCalError:

-		format_error_text(response,-340,"Calibration problem.");

-		break;

-

-	case HardwareError:

-		format_error_text(response,-240,"Not possible with the current calibration settings.");

-		break;

-

-	case CalibrationTimingProblem:

-		format_error_text(response,-221,"Set timing to allow operation at minimum and maximum amplitudes.");

-		break;

-

-	case Coupled_OS_Ampl_Error:

-		format_error_text(response,-221,"If ampl > 0, ampl+offset must be > 0, if ampl < 0, ampl+offset must be < 0.");

-		break;

-

-	case PW_Distort_Error:

-		format_error_text(response,-240,"Not possible with the current PW distortion settings.");

-		break;

-

-	case burst_duty_error:

-		format_error_text(response,-222,"Duty cycle inside burst is too high.");

-		break;

-

-	case min_burst_period_error:

-		format_error_text(response,-222,"Time between consecutive rising edges inside burst is too low.");

-		break;

-

-	case max_burst_count_error:

-		format_error_text(response,-222,"Too many pulses per burst.");

-		break;

-

-	case min_burst_gap_error:

-		format_error_text(response,-222,"Pulse separation too low.");

-		break;

-

-	case max_burst_gap_error:

-		format_error_text(response,-222,"Pulse separation too high.");

-		break;

-

-	case Burst_Exceeds_Period:

-		format_error_text(response,-222,"Burst width can not exceed period.");

-		break;

-

-	case password_change_error:

-		format_error_text(response,-222,"Incorrect old password, or new password is too long or short. ");

-		break;

-

-	default:

-		format_error_text(response,-200,"Specific problem unknown.");

-	}

-

-}

-

+/* START LIBRARY DESCRIPTION *********************************************
+ERRCHK.LIB
+	Copyright (c) 2006, Avtech Electrosystems Ltd.
+
+DESCRIPTION:
+	Error-checking and reporting functions.
+
+SUPPORT LIB'S:
+END DESCRIPTION **********************************************************/
+
+
+/*** BeginHeader Error_check */
+
+#include <string.h>
+#include <glib/gprintf.h>
+#include "globals.h"
+#include "dummy_functions.h"
+#include "lcd.h"
+
+/*** EndHeader */
+
+/* FIXME */
+int Error_Screen=NO;
+
+void set_gpib_error_flags (int error_num);
+
+void set_gpib_error_flags (int error_num)
+{
+
+	if (error_num == OK) {
+		return;
+	}
+
+	/* set the error flags in the GPIB ESR register right away */
+	switch (error_num) {
+	case AsyncModeDisabled:
+	case Unrecognized:
+	case SyntaxError:
+	case UnknownUnits:
+	case InvalidChannel:
+		GPIB_Set_Command_Error();
+		break;
+	case query_error_interrupted:
+	case query_error_unterminated:
+		GPIB_Set_Query_Error();
+		break;
+	case Overload_Detected:
+	case Overtemp_Detected:
+	case Overvolt_Detected:
+	case Device_Specific_Aux_Error_Detected:
+	case queue_overflow:
+	case CalibrationPercentError:
+	case CalibrationZeroError:
+	case CalibrationMinMaxError:
+	case CalibrationClosenessError:
+	case CalibrationRangeError:
+	case CalibrationPolarityError:
+	case Soft_Limit_Exceeded:
+	case SelfCalError:
+		GPIB_Set_Device_Dependent_Error();
+		break;
+	default:
+		GPIB_Set_Execution_Error();
+		break;
+	}
+
+	return;
+}
+
+void queue_error(int error_num);
+
+void queue_error(int error_num)
+{
+	if (error_num == OK) {
+		return;
+	}
+
+	set_gpib_error_flags (error_num);
+	if (globals.number_of_errors<error_queue_length) {
+		++globals.number_of_errors;
+		globals.error_queue[globals.number_of_errors]=error_num;
+	} else {
+		globals.error_queue[globals.number_of_errors]=queue_overflow;
+	}
+
+	return;
+}
+
+
+
+/*----------------------------------------------------------------------------------------------------------*/
+void queue_error_and_get_text(gchar** response, int error_num)
+{
+	g_assert (*response == NULL);
+
+	if (error_num == OK) {
+		return;
+	}
+	queue_error (error_num);
+	get_error_text (response, error_num);
+	return;
+}
+
+/*----------------------------------------------------------------------------------------------------------*/
+void queue_error_from_parser(gchar** response, int error_num)
+{
+	g_assert (*response == NULL);
+
+	if (error_num == OK) {
+		return;
+	}
+	queue_error_and_get_text(response, error_num);
+	Menu_Refresh();
+	return;
+}
+
+
+void queue_error_for_gpib_only(int error_num);
+
+void queue_error_for_gpib_only(int error_num)
+{
+// not part of this project, but left in for coder's reference. Can be deleted for now
+	if (error_num == OK) {
+		return;
+	}
+	queue_error(error_num);
+	return;
+}
+
+
+void queue_error_and_display_on_LCD(int error_num);
+
+void queue_error_and_display_on_LCD(int error_num)
+{
+	gchar* response = NULL;
+	queue_error_and_get_text(&response, error_num);
+	LCD_display_error_message (response);
+}
+
+
+void queue_and_broadcast_sensor_alarm(int error_num);
+
+void queue_and_broadcast_sensor_alarm(int error_num)
+{
+// not part of this project, but left in for coder's reference. Can be deleted for now
+}
+
+/*----------------------------------------------------------------------------------------------------------*/
+void Error_Remove_From_Queue(void)
+{
+	int i;
+	for (i=1; i<globals.number_of_errors; ++i) {
+		globals.error_queue[i]=globals.error_queue[i+1];
+	}
+	--globals.number_of_errors; 	/* error reported, so remove it from the error queue */
+}
+
+
+void format_error_text (gchar **response, int error_type, char *in);
+
+void format_error_text (gchar **response, int error_type, char *in)
+{
+	char* prefix = NULL;
+
+	switch (error_type) {
+	case 0:
+		prefix = g_strdup("No error");
+		break;
+	case -100:
+		prefix=g_strdup("Command error");
+		break;
+	case -102:
+		prefix=g_strdup("Syntax error");
+		break;
+	case -114:
+		prefix=g_strdup("Command error");
+		break;
+	case -131:
+		prefix=g_strdup("Invalid suffix");
+		break;
+	case -200:
+		prefix=g_strdup("Execution error");
+		break;
+	case -221:
+		prefix=g_strdup("Settings conflict");
+		break;
+	case -222:
+		prefix=g_strdup("Data out of range");
+		break;
+	case -224:
+		prefix=g_strdup("Illegal parameter value");
+		break;
+	case -240:
+		prefix=g_strdup("Hardware error");
+		break;
+	case -300:
+		prefix=g_strdup("Device-specific error");
+		break;
+	case -340:
+		prefix=g_strdup("Calibration failed");
+		break;
+	case -350:
+		prefix=g_strdup("Queue overflow");
+		break;
+	case -400:
+		prefix=g_strdup("Query error");
+		break;
+	default:
+		prefix=g_strdup("System error");
+		break;
+	}
+
+
+	*response = g_strdup_printf("%d, \"%s; %s\"", error_type, prefix, in);
+	g_free(prefix);
+}
+
+
+void get_error_text(gchar **response, int error_num)
+{
+	switch (error_num) {
+
+	case OK:
+		format_error_text(response,0,"");
+		break;
+
+	case Unrecognized:
+		format_error_text(response,-102,"Unrecognized command.");
+		break;
+
+	case AsyncModeDisabled:
+		format_error_text(response,-102,"Async gating not available.");
+		break;
+
+	case SyntaxError:
+		format_error_text(response,-100,"Recognized command, but improper syntax.");
+		break;
+
+	case InvalidChannel:
+		format_error_text(response,-114,"Invalid channel suffix.");
+		break;
+
+	case OutOfRange:
+		format_error_text(response,-222,"Too high or too low.");
+		break;
+
+	case Negative_Not_Allowed:
+		format_error_text(response,-222,"Negative value not allowed.");
+		break;
+
+	case IllegalParameter:
+	case amplitude_confined_values:
+		format_error_text(response,-224,"Not in list of allowed values.");
+		break;
+
+	case UnknownUnits:
+		format_error_text(response,-131,"Unrecognized units.");
+		break;
+
+	case Route_Range_Error:
+		format_error_text(response,-224,"Ranges are not supported.");
+		break;
+
+	case AB_Mode_Error:
+		format_error_text(response,-221,"This PW mode is not valid for the current trigger mode.");
+		break;
+
+	case Valid_For_RS232_TELNET_Only:
+		format_error_text(response,-221,"Command valid in RS232 or TELNET modes only.");
+		break;
+
+	case PW_Exceeds_Period:
+		format_error_text(response,-221,"PW can not exceed period.");
+		break;
+
+	case Delay_Exceeds_95Period:
+		format_error_text(response,-221,"Delay can not exceed 95% of period.");
+		break;
+
+	case NeedNonZeroAmpl:
+		format_error_text(response,-222,"Amplitude must be non-zero.");
+		break;
+
+	case freq_lower_limit:
+		format_error_text(response,-222,"PRF too low.");
+		break;
+
+	case freq_upper_limit:
+		format_error_text(response,-222,"PRF too high.");
+		break;
+
+	case pw_lower_limit:
+		format_error_text(response,-222,"PW too low.");
+		break;
+
+	case pw_upper_limit:
+		format_error_text(response,-222,"PW too high.");
+		break;
+
+	case max_rise_time_error:
+		format_error_text(response,-222,"Rise time too high.");
+		break;
+
+	case min_rise_time_error:
+		format_error_text(response,-222,"Rise time too low.");
+		break;
+
+	case max_slew_error:
+		format_error_text(response,-222,"Slew rate too high.");
+		break;
+
+	case min_slew_error:
+		format_error_text(response,-222,"Slew rate too low.");
+		break;
+
+	case max_load_type_error:
+		format_error_text(response,-222,"Resistance too high.");
+		break;
+
+	case min_load_type_error:
+		format_error_text(response,-222,"Duty cycle too high or load resistance too low.");
+		break;
+
+	case max_soft_current_limit_error:
+		format_error_text(response,-222,"Current limit too high.");
+		break;
+
+	case min_soft_current_limit_error:
+		format_error_text(response,-222,"Current limit too low.");
+		break;
+
+	case duty_cycle_upper_limit:
+		format_error_text(response,-222,"Duty cycle too high.");
+		break;
+
+	case Average_Amplitude_Too_High:
+		format_error_text(response,-222,"Average amplitude too high.");
+		break;
+
+	case delay_lower_limit:
+		format_error_text(response,-222,"Delay too low.");
+		break;
+
+	case delay_upper_limit:
+		format_error_text(response,-222,"Delay too high.");
+		break;
+
+	case amplitude_lower_limit:
+		format_error_text(response,-222,"Amplitude too low.");
+		break;
+
+	case amplitude_upper_limit:
+		format_error_text(response,-222,"Amplitude too high.");
+		break;
+
+	case peak_power_limit:
+		format_error_text(response,-222,"Peak power too high.");
+		break;
+
+	case average_power_limit:
+		format_error_text(response,-222,"Average power too high.");
+		break;
+
+	case offset_lower_limit:
+		format_error_text(response,-222,"Offset too low.");
+		break;
+
+	case offset_upper_limit:
+		format_error_text(response,-222,"Offset too high.");
+		break;
+
+	case ampl_plus_os_lower_limit:
+		format_error_text(response,-222,"AMPL+OS too low.");
+		break;
+
+	case ampl_plus_os_upper_limit:
+		format_error_text(response,-222,"AMPL+OS too high.");
+		break;
+
+	case DutyTriggerError:
+		format_error_text(response,-221,"Duty cycle can not be set. Set PW instead.");
+		break;
+
+	case PW_Exceeds_Double_Separation:
+		format_error_text(response,-221,"PW can not exceed double pulse separation.");
+		break;
+
+	case Double_Separation_Too_Large:
+		format_error_text(response,-221,"Double pulse separation is too high. It must be < 95% of the period.");
+		break;
+
+	case queue_overflow:
+		format_error_text(response,-350,"Clear with *cls or syst:err.");
+		break;
+
+	case query_error_interrupted:
+		format_error_text(response,-400,"Data lost in output buffer.");
+		break;
+
+	case query_error_unterminated:
+		format_error_text(response,-400,"No data to send.");
+		break;
+
+	case Overload_Detected:
+		format_error_text(response,-300,"Power supply overload detected. The output has been turned off.");
+		break;
+
+	case Overtemp_Detected:
+		format_error_text(response,-300,"Overheating problem. The output has been turned off.");
+		break;
+
+	case Overvolt_Detected:
+		format_error_text(response,-300,"Over-voltage or over-current! The output has been turned off.");
+		break;
+
+	case Soft_Limit_Exceeded:
+		format_error_text(response,-300,"Monitor current limit exceeded! The output has been turned off.");
+		break;
+
+	case Device_Specific_Aux_Error_Detected:
+		// replace with "FIXME" if Flash not implemented yet
+		format_error_text(response,-300,globals.Flash.aux_error_message);
+		break;
+
+	case CalibrationPercentError:
+		format_error_text(response,-340,"Percent change is too large.");
+		break;
+
+	case CalibrationPolarityError:
+		format_error_text(response,-340,"Old and new polarities disagree.");
+		break;
+
+	case CalibrationZeroError:
+		format_error_text(response,-340,"Zero point can not be changed.");
+		break;
+
+	case CalibrationMinMaxError:
+		format_error_text(response,-340,"Would prevent operation at the minimum or maximum settings.");
+		break;
+
+	case CalibrationClosenessError:
+		format_error_text(response,-340,"Too few calibration points, or they are too closely spaced.");
+		break;
+
+	case CalibrationRangeError:
+		format_error_text(response,-340,"Top or bottom of range. Can not be deleted.");
+		break;
+
+	case SelfCalError:
+		format_error_text(response,-340,"Calibration problem.");
+		break;
+
+	case HardwareError:
+		format_error_text(response,-240,"Not possible with the current calibration settings.");
+		break;
+
+	case CalibrationTimingProblem:
+		format_error_text(response,-221,"Set timing to allow operation at minimum and maximum amplitudes.");
+		break;
+
+	case Coupled_OS_Ampl_Error:
+		format_error_text(response,-221,"If ampl > 0, ampl+offset must be > 0, if ampl < 0, ampl+offset must be < 0.");
+		break;
+
+	case PW_Distort_Error:
+		format_error_text(response,-240,"Not possible with the current PW distortion settings.");
+		break;
+
+	case burst_duty_error:
+		format_error_text(response,-222,"Duty cycle inside burst is too high.");
+		break;
+
+	case min_burst_period_error:
+		format_error_text(response,-222,"Time between consecutive rising edges inside burst is too low.");
+		break;
+
+	case max_burst_count_error:
+		format_error_text(response,-222,"Too many pulses per burst.");
+		break;
+
+	case min_burst_gap_error:
+		format_error_text(response,-222,"Pulse separation too low.");
+		break;
+
+	case max_burst_gap_error:
+		format_error_text(response,-222,"Pulse separation too high.");
+		break;
+
+	case Burst_Exceeds_Period:
+		format_error_text(response,-222,"Burst width can not exceed period.");
+		break;
+
+	case password_change_error:
+		format_error_text(response,-222,"Incorrect old password, or new password is too long or short. ");
+		break;
+
+	default:
+		format_error_text(response,-200,"Specific problem unknown.");
+	}
+
+}
+