Instrument.git - The instrument daemon

Age	Commit message (Expand)	Author
2000-01-01	version bumpINSTRUMENT_6_2_28	Mike
2000-01-01	implement ampl-dependent arbitrary voltage output - for AVR-E5-B S/N 13618	Mike
2000-01-01	store distortion dac values, not floats	Mike
2000-01-01	added variables for ampl-dependent distortion output	Mike
2000-01-01	Rename piece-wise-linear variables for clarity, dropping reference to obsolet...	Mike
2000-01-01	Do not account for invertedness when calculating duty cycle. Units with inver...INSTRUMENT_6_2_27b	Mike
2000-01-01	simplified YES/NO logic	Mike
2000-01-01	replace pol_norm and pol_complement with NO/YES for clarity	Mike
2000-01-01	rename "polarity" variables to "inverted" for clarity	Mike
2000-01-01	bump versionINSTRUMENT_6_2_27	Mike
2000-01-01	added a 100 ns minimum dead time requirement	Mike
2000-01-01	bump versionINSTRUMENT_6_2_26b	Mike
2000-01-01	set advance mode for delay test modeINSTRUMENT_6_2_26	Mike
2000-01-01	don't enable delay test mode for CH2INSTRUMENT_6_2_25b	Mike
2000-01-01	don't do as many error checks when delay word/range is overriddenINSTRUMENT_6_2_25	Mike
2000-01-01	more useful error message when setting CH2 delay cal	Mike
2000-01-01	more specific errors during cal min/max check, and more initial cal points	Mike
2017-05-25	version bumpINSTRUMENT_6_2_24	Michael J. Chudobiak
2017-05-23	fix min/max cal point check for units with non-zero rst amplitude (AVRQ-5-B-AHV)	Michael J. Chudobiak
1970-01-01	version bumpINSTRUMENT_6_2_23	mjc
1970-01-01	Enforce minimum ampl magnitude (based on zero_equiv_ampl) in AVRQ -AHV, -XHV ...	mjc
2000-01-01	version bumpINSTRUMENT_6_2_22	mjc
2000-01-01	self-cal needs at least 2 periods for PW cal measurement time	mjc
2000-01-01	version bumpINSTRUMENT_6_2_21	mjc
2000-01-01	make self-cal min count configurable	mjc
2000-01-01	make self-cal reference frequency configurable	Mike
2000-01-01	added ability to increase output-on delay	Mike
2000-01-01	added get_float_with_min function	Mike
2000-01-01	added get_bounded_float function	Mike
2017-03-22	reduced minimum self-cal measurement from 100us to 40us (0.25% resolution)	Michael J. Chudobiak
2016-12-12	version bumpINSTRUMENT_6_2_20	Michael J. Chudobiak
2016-12-12	Revert force-output-on during timing cal option. Too complex, little reward.	Michael J. Chudobiak
1970-01-01	version bumpINSTRUMENT_6_2_19	root
1970-01-01	allow option to force output on during timing cal	root
2000-01-01	version bumpINSTRUMENT_6_2_18	mjc
2000-01-01	Additional PRF points for 0.1 Hz operation	mjc
2000-01-01	version bumpINSTRUMENT_6_2_17	root
2000-01-01	fixed incorrect init of burst, prf integers	root
2000-01-01	version bumpINSTRUMENT_6_2_16	root
2000-01-01	choose initial PW cal points assuming DDU #2 removed	root
2000-01-01	toggle both polarities of trigger lines on optocoupler boot toggleINSTRUMENT_6_2_15	root
2000-01-01	version bump	root
2000-01-01	try to turn output off on power fail	root
2000-01-01	version bumpINSTRUMENT_6_2_14	root
2000-01-01	fix last patch	root
2016-09-09	additional initial cal point per range for burst mode	Michael J. Chudobiak
2016-09-09	additional address comments in flash for clarity	Michael J. Chudobiak
1970-01-01	bumped versionINSTRUMENT_6_2_13	root
1970-01-01	fix non-working linear interpolation, = vs ==	root
2000-01-01	set minimum allowed PRF during PW/delay calibration	root