Instrument.git - The instrument daemon

Age	Commit message (Collapse)	Author
2020-03-18	version bumpINSTRUMENT_6_4_17	Michael J. Chudobiak

2020-03-18	add an "ALIVE" output, to switch on VCC2 in AVRQ (for example)	Michael J. Chudobiak

2000-01-01	version bumpINSTRUMENT_6_4_16	Mike

2000-01-01	allow mult/div by 10 of burst count values	Mike

2000-01-01	Simplify needlessly complex error handling when adjusting encoder	Mike

2000-01-01	Simplify needlessly complex error handling when mult/div menu values	Mike

2000-01-01	Don't move arrow if only one mode. Fix amplitude mode list.INSTRUMENT_6_4_15b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_15	Mike

2000-01-01	tidy amplitude menu code	Mike

2000-01-01	Don't write GPIB address to flash until CHANGE button pressed, to avoid ↵	Mike
	weird pauses
2000-01-01	version bumpINSTRUMENT_6_4_14	Mike

2000-01-01	another divide-by-zero error	Mike

2000-01-01	version bumpINSTRUMENT_6_4_13	Mike

2019-07-16	forward port of avg_error calc divide-by-zero fix from AVR-8A-B-P-QTKB repair	Michael J. Chudobiak

2000-01-01	version bumpINSTRUMENT_6_4_12	Mike

2000-01-01	do not reset state before calibrating rise time in AVRQ	Mike

2019-01-08	version bumpINSTRUMENT_6_4_11	Michael J. Chudobiak

2019-01-08	always enable vxi now	Michael J. Chudobiak

2000-01-01	fix min/max ampl/vout balancing when nulling delay shift calINSTRUMENT_6_4_10b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_10	Mike

2000-01-01	fix ampl min/max checks when max_ampl is limited by max_vout (some -OT units)	Mike

2018-11-23	version bumpINSTRUMENT_6_4_09	Michael J. Chudobiak

2018-11-23	enable VXI on unprogrammed boards, for testing without GPIB	Michael J. Chudobiak

2000-01-01	make max step size deviation configurableINSTRUMENT_6_4_08b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_08	Mike

2000-01-01	better monitor averaging (for AVO-8E3 S/N 13790) with auto-reset of average	Mike

2000-01-01	reduce duplicate prompts in multi-line handlingINSTRUMENT_6_4_07c	Mike

2000-01-01	make force_output_fully_off work properly for 2-channel unitsINSTRUMENT_6_4_07b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_07	Mike

2000-01-01	indent last commit properly	Mike

2000-01-01	Split inputs into separate lines when multiple interactive commands are received	Mike

2000-01-01	version bumpINSTRUMENT_6_4_06	Mike

2000-01-01	fix duty cycle calculation when calibrating amplitude	Mike

2018-08-14	only check pw_rc limit if greater than zeroINSTRUMENT_6_4_05b	Michael J. Chudobiak

2000-01-01	version bumpINSTRUMENT_6_4_05	Mike

2000-01-01	most error checks now used rationalized limit-check functions	Mike

2000-01-01	Revert portion of last for burst control. Deal with later. Report error only ↵	Mike
	if count>1
2000-01-01	use standard functions to do simple positive min/max error checks	Mike

2000-01-01	rename some error messages that flag inappropriate config values	Mike

2000-01-01	calculate freq-based limits and errors in all modes, not just internal ↵	Mike
	trigger mode
2000-01-01	added hvps_avg_curr_limit for AVR-8F-B	Mike

2000-01-01	add cap_for_pw_rc_limit for AVR-8F-B	Mike

2000-01-01	version bumpINSTRUMENT_6_4_04	Mike

2000-01-01	expansion DACs default to zero at power-up	Mike

2000-01-01	implement full control of DACs 8-15	Mike

2000-01-01	Allow up to 16 DACs, by adding PCB 313A	Mike

2000-01-01	define new I2C ports for PCB 313A DAC board	Mike

2000-01-01	version bumpINSTRUMENT_6_4_03c	Mike

2000-01-01	make drive polarity of zout relay configurable for -R50 units and PCB 308AINSTRUMENT_6_4_03b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_02	Mike