summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
1970-01-01version bumpINSTRUMENT_6_2_19root
1970-01-01allow option to force output on during timing calroot
2000-01-01version bumpINSTRUMENT_6_2_18mjc
2000-01-01Additional PRF points for 0.1 Hz operationmjc
2000-01-01version bumpINSTRUMENT_6_2_17root
2000-01-01fixed incorrect init of burst, prf integersroot
2000-01-01version bumpINSTRUMENT_6_2_16root
2000-01-01choose initial PW cal points assuming DDU #2 removedroot
2000-01-01toggle both polarities of trigger lines on optocoupler boot toggleINSTRUMENT_6_2_15root
2000-01-01version bumproot
2000-01-01try to turn output off on power failroot
2000-01-01version bumpINSTRUMENT_6_2_14root
2000-01-01fix last patchroot
2016-09-09additional initial cal point per range for burst modeMichael J. Chudobiak
2016-09-09additional address comments in flash for clarityMichael J. Chudobiak
1970-01-01bumped versionINSTRUMENT_6_2_13root
1970-01-01fix non-working linear interpolation, = vs ==root
2000-01-01set minimum allowed PRF during PW/delay calibrationroot
2000-01-01version bump to 6.2.12INSTRUMENT_6_2_12root
2000-01-01remove failed 3 point interpolation schemeroot
2000-01-01add, but don't use, 3 pt inversion interpolation - doesn't work well!root
2000-01-01separate function for inverse interpolation of X given desired Yroot
2000-01-01separate function for linear interpolation of X given desired Yroot
1970-01-01add PW distortion for AVR-E, AVIR, AVL. 0% at max amplitude, 100% below set ↵INSTRUMENT_6_2_11broot
value
1970-01-01version bumpINSTRUMENT_6_2_11root
1970-01-01fix error in pw/delay control introduced by voltage-controlled 2CH delayroot
1970-01-01version bump, for 2CHPPINSTRUMENT_6_2_10root
1970-01-01for 2CHPP CH2 delay cal, use existing parametersroot
1970-01-01use delay magnitude to set test PRF since it can be negative, and simplify ↵root
extrapolation
1970-01-01first attempt at implementing CH2 2CHPP delay functionroot
1970-01-01added volt_ctrl_delay, for 2CHPP on CH2root
1970-01-01move attenuator code out of CH1-only block, so it works for CH2INSTRUMENT_6_2_09croot
1970-01-01use XTR1 and XTR4 for dual-channel single attenuators, not XTR1 and XTR2root
1970-01-01do not set XTR polarity line for CH2 if not dual-polarity, to save XTR linesroot
1970-01-01add missing headerINSTRUMENT_6_2_09broot
1970-01-01version bumpINSTRUMENT_6_2_09root
1970-01-01handle default delay better for CH2 of 2CHPProot
1970-01-01accept only simple positive integers in commands, reverses last commitroot
1970-01-01accept user int parameters in floating format for scpi complianceroot
1970-01-01stronger checking of numeric parameter formatsroot
1970-01-01version bumpINSTRUMENT_6_2_08root
1970-01-01hide delay feature on AVR-EBT1-B by setting max_delay to 0.0root
1970-01-01version bumpINSTRUMENT_6_2_07root
1970-01-01fix numeric string detection in parameter/units by anchoring regexroot
2016-04-29tagged for 6.2.06INSTRUMENT_6_2_06Michael J. Chudobiak
2016-04-29implement CH2 attenuator rangesMichael J. Chudobiak
1970-01-01version bumpINSTRUMENT_6_2_05root
1970-01-01added support for sequential vs binary attenuator stagesroot
2000-01-01version bumpINSTRUMENT_6_2_04root
2000-01-01toggle trigger at boot, if specified, for IL710root
generated by cgit (git 2.34.1) at 2024-12-23 15:27:57 +0000