Instrument.git - The instrument daemon

Age	Commit message (Collapse)	Author
2000-01-01	Sleep time is now fraction of max based on DAC changeINSTRUMENT_6_4_33	Mike

2000-01-01	add TODO for Monday	Mike

2000-01-01	do not add redundant settling time flag when changing ampl mode	Mike

2000-01-01	further refinements to ampl settling time, but need to make it dependent on ↵	Mike
	size of DAC change?
2023-11-10	add an amplitude settling time for SN 14256 repair and future units	Michael J. Chudobiak

2000-01-01	tweak zout-based duty cycle error check to allow max duty cycle to actually ↵INSTRUMENT_6_4_32	Mike
	be reached
2000-01-01	version bumpINSTRUMENT_6_4_31	Mike

2000-01-01	fix VXI timeout bug	Mike

2000-01-01	bump default min PW from 25 to 30 ns due to use of 74HCT151 instead of 74ACT151INSTRUMENT_6_4_30	Mike

2000-01-01	version bumpINSTRUMENT_6_4_29	Mike

2000-01-01	Do not apply polarity-based PW shift in bot range if bot range is voltage ↵	Mike
	controlled
2000-01-01	version bumpINSTRUMENT_6_4_28	Mike

2000-01-01	fix determination of when to use negative monitor configs	Mike

2000-01-01	delete an unused variable	Mike

2000-01-01	Fix crashes caused by uninitialized pointer	Mike

2000-01-01	reduce ampl_zero_equiv by a factor of 10 in -LV attenuator modeINSTRUMENT_6_4_27c	Mike

2000-01-01	extended delay when switching attenuators in -LV units	Mike

2000-01-01	only use attenuators in switchable zout units whem zout is 50 OhmsINSTRUMENT_6_4_27b	Mike

2000-01-01	simplify checks for enabled switchable_zout	Mike

2000-01-01	misc fixes to max zout checksINSTRUMENT_6_4_27	Mike

2000-01-01	version bump	Mike

2000-01-01	first attempt at adding lower duty limit when ZOUT=MAX, for -LV option	Mike

2000-01-01	version bumpINSTRUMENT_6_4_26	Mike

2000-01-01	toggle min PW module on powerup also, due to use of IL710 in PCB 340A/B	Mike

2000-01-01	version bumpINSTRUMENT_6_4_25	Mike

2000-01-01	Test encoder against min change and min speed, for free-rolling defective ↵	Mike
	encoders
2000-01-01	version bumpINSTRUMENT_6_4_24	Mike

2000-01-01	Do not switch polarity relay line in dual-chan dual-pol units, if CH2 ↵	Mike
	ignores POL (like AVRK-DPF)
2000-01-01	Major reworking. Set_VI_Control now stores its calculation results for later ↵INSTRUMENT_6_4_23d	Mike
	reference. This fixes the problem of adding cal points to parameters with large adjustments. The x values are now correct, but the user must still manually compensate for y changes.
2000-01-01	fully implement disable timing cal percentage check	Mike

2000-01-01	debug messages showing XTR line changesINSTRUMENT_6_4_23c	Mike

2000-01-01	remove broken CH2 TTL/ECL logic code, not used in any instruments now	Mike

2000-01-01	+/- button not working as expected first press after turn-on, fixed. Better ↵	Mike
	debugging messages.
2000-01-01	Allow CH2 DLY to control trigger PW (for -2CHX). Better debug messages.INSTRUMENT_6_4_23b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_23	Mike

2000-01-01	Dump valid points to console when querying range info, to debug errant cal ↵	Mike
	points
2000-01-01	version bumpINSTRUMENT_6_4_22	Mike

2000-01-01	add ability to temporarily disable timing cal percentage check, for ↵	Mike
	burst/sep/dly2
2000-01-01	version bumpINSTRUMENT_6_4_21	Mike

2020-07-27	add support for new jig pin on keypad 104G	Michael J. Chudobiak

2000-01-01	version bumpINSTRUMENT_6_4_20	Mike

2000-01-01	Only ignore polarity when shown to user. Use polarity when considering ↵	Mike
	calibration ranges.
2000-01-01	let rise time go to the lowest hardware-possible value, not just the ↵INSTRUMENT_6_4_19c	Mike
	specified minimum - for AVRQ
2000-01-01	reduce min rise time cal points to reflect faster 266D	Mike

2000-01-01	same as last, missed a spotINSTRUMENT_6_4_19b	Mike

2000-01-01	tagged for 6.4.19INSTRUMENT_6_4_19	Mike

2000-01-01	ampl_zero_equiv can be large in some AVRQ units, use smallest_allowed_number ↵	Mike
	for comparisons instead
2000-01-01	fix encoder clearingINSTRUMENT_6_4_18b	Mike

2000-01-01	version bumpINSTRUMENT_6_4_18	Mike

2000-01-01	ignore tiniest encoder steps	Mike