Instrument.git - The instrument daemon

Age	Commit message (Collapse)	Author
2000-01-01	tweak zout-based duty cycle error check to allow max duty cycle to actually ↵INSTRUMENT_6_4_32	Mike
	be reached
2000-01-01	reduce ampl_zero_equiv by a factor of 10 in -LV attenuator modeINSTRUMENT_6_4_27c	Mike

2000-01-01	misc fixes to max zout checksINSTRUMENT_6_4_27	Mike

2000-01-01	first attempt at adding lower duty limit when ZOUT=MAX, for -LV option	Mike

2000-01-01	Allow CH2 DLY to control trigger PW (for -2CHX). Better debug messages.INSTRUMENT_6_4_23b	Mike

2020-07-27	add support for new jig pin on keypad 104G	Michael J. Chudobiak

2000-01-01	let rise time go to the lowest hardware-possible value, not just the ↵INSTRUMENT_6_4_19c	Mike
	specified minimum - for AVRQ
2000-01-01	another divide-by-zero error	Mike

2019-07-16	forward port of avg_error calc divide-by-zero fix from AVR-8A-B-P-QTKB repair	Michael J. Chudobiak

2000-01-01	fix duty cycle calculation when calibrating amplitude	Mike

2018-08-14	only check pw_rc limit if greater than zeroINSTRUMENT_6_4_05b	Michael J. Chudobiak

2000-01-01	most error checks now used rationalized limit-check functions	Mike

2000-01-01	Revert portion of last for burst control. Deal with later. Report error only ↵	Mike
	if count>1
2000-01-01	use standard functions to do simple positive min/max error checks	Mike

2000-01-01	rename some error messages that flag inappropriate config values	Mike

2000-01-01	calculate freq-based limits and errors in all modes, not just internal ↵	Mike
	trigger mode
2000-01-01	added hvps_avg_curr_limit for AVR-8F-B	Mike

2000-01-01	add cap_for_pw_rc_limit for AVR-8F-B	Mike

2000-01-01	Add commands to add EA distort voltages based on existing ampl cal points	Mike

2000-01-01	make all aux error messages configurableINSTRUMENT_6_2_36c	Mike

2000-01-01	Thermal sensor can be used for interlock. Updated error message.	Mike

2000-01-01	separate minimum equiv offset from ampl, for AVIR-4-B-OT	Mike

2000-01-01	limit double pulse mode delay to 50% of periodINSTRUMENT_6_2_30c	Mike

2000-01-01	enforce double pulse minimum spacingINSTRUMENT_6_2_30b	Mike

2000-01-01	throw error if burst mode and double pulse mode enabled at the same time	Mike

2000-01-01	Do not account for invertedness when calculating duty cycle. Units with ↵INSTRUMENT_6_2_27b	Mike
	invert function are limited by time base circuit, not by average power.
2000-01-01	simplified YES/NO logic	Mike

2000-01-01	replace pol_norm and pol_complement with NO/YES for clarity	Mike

2000-01-01	rename "polarity" variables to "inverted" for clarity	Mike

2000-01-01	added a 100 ns minimum dead time requirement	Mike

2000-01-01	more useful error message when setting CH2 delay cal	Mike

2000-01-01	more specific errors during cal min/max check, and more initial cal points	Mike

1970-01-01	Enforce minimum ampl magnitude (based on zero_equiv_ampl) in AVRQ -AHV, -XHV ↵	mjc
	options
2015-10-07	purge obsolete AVMP-4-B PW range control mode, bump versionINSTRUMENT_6_0_27	Michael J. Chudobiak

1970-01-01	first attempt at adding min/max-only rise time, for -KTA-TRA	root

1970-01-01	show error message on LCD if GPIB chip not detectedINSTRUMENT_6_0_15	root

2014-08-14	remove AVRQ-3-B supportINSTRUMENT_6_0_4	Michael J. Chudobiak

1970-01-01	account for min/max fixed amplitudes in error checker	root

1970-01-01	throw error if old-AVRQ-style high zero equiv ampl is set. obsolete.	root

1970-01-01	throw error if obsolete ampl min/max-only mode is enabled	root

2014-08-13	first attempt at better AVRQ amplitude handling	Michael J. Chudobiak

1970-01-01	limit maximum PRF if offset is high in 101x-OT unitsINSTRUMENT_6_0_2d	root

1999-12-31	Permit negative delays on CH1 of dual-delay units, for -KMPD	root

1999-12-31	add config option to force monotonic TRIG-OUT delay when externally triggered.	root

2013-10-02	Revert "added chans_opposite_polarities for AVR-D3-B-MS1 error checking"	Michael J. Chudobiak
	This reverts commit e1678aa56d0d1deaf003e0a04f09d26000d9eca5.
2013-10-02	Revert "calculate ch1 min/max ampl correctly in AVR-D3-B"	Michael J. Chudobiak
	This reverts commit c6550aba8a93cf543311d1b63224a8b97b339094.
1999-12-31	calculate ch1 min/max ampl correctly in AVR-D3-B	root

2013-10-02	added chans_opposite_polarities for AVR-D3-B-MS1 error checking	Michael J. Chudobiak

2013-08-08	finish ab_mode chankey changes	Michael J. Chudobiak

2013-08-08	rename ab_mode vars to pw_ctrl_mode, and remove ab_mode chankey	Michael J. Chudobiak