#ifndef GLOBALS_H_ #define GLOBALS_H_ #include #include #include #include #include #define DEBUG_ON - uncomment this to have debug messages #ifdef DEBUG_ON #define g_print_debug(...) g_print(__VA_ARGS__) #else #define g_print_debug(...) {} #endif /* error codes */ #define OK 0 #define Unrecognized 1 #define SyntaxError 2 #define OutOfRange 3 #define UnknownUnits 4 #define Overload_Detected 5 #define duty_cycle_upper_limit 6 #define AB_Mode_Error 7 #define Valid_For_RS232_TELNET_Only 8 #define PW_Exceeds_Period 9 #define Delay_Exceeds_95Period 10 #define Double_Separation_Too_Large 11 #define freq_lower_limit 12 #define freq_upper_limit 13 #define pw_lower_limit 14 #define pw_upper_limit 15 #define delay_upper_limit 16 #define delay_lower_limit 17 #define amplitude_lower_limit 18 #define amplitude_upper_limit 19 #define offset_lower_limit 20 #define offset_upper_limit 21 #define ampl_plus_os_lower_limit 22 #define ampl_plus_os_upper_limit 23 #define DutyTriggerError 24 #define PW_Exceeds_Double_Separation 25 #define queue_overflow 26 #define query_error_interrupted 27 #define IllegalParameter 28 #define Negative_Not_Allowed 29 #define query_error_unterminated 30 #define Overtemp_Detected 31 #define Overvolt_Detected 32 #define Device_Specific_Aux_Error_Detected 33 #define InvalidChannel 34 #define AsyncModeDisabled 36 #define CalibrationPercentError 37 #define NeedNonZeroAmpl 38 #define amplitude_confined_values 40 #define HardwareError 41 #define CalibrationZeroError 42 #define CalibrationClosenessError 44 #define CalibrationTimingProblem 45 #define CalibrationRangeError 46 #define CalibrationPolarityError 47 #define Coupled_OS_Ampl_Error 48 #define PW_Distort_Error 49 #define burst_duty_error 50 #define min_burst_period_error 51 #define min_burst_gap_error 52 #define max_burst_gap_error 53 #define max_burst_count_error 54 #define Burst_Exceeds_Period 55 #define password_change_error 56 #define min_rise_time_error 57 #define max_rise_time_error 58 #define min_soft_current_limit_error 59 #define max_soft_current_limit_error 60 #define Average_Amplitude_Too_High 61 #define Route_Range_Error 64 #define Soft_Limit_Exceeded 65 #define min_slew_error 67 #define max_slew_error 68 #define min_load_type_error 69 #define max_load_type_error 70 #define peak_power_limit 71 #define average_power_limit 72 #define SelfCalError 73 #define NetworkNotFound 74 #define ThisShouldntHappen 75 #define Startup_Not_Finished 76 #define DelayRangeError 77 #define ExternalModeDelayError 78 #define PRF_limited_by_offset 79 #define obsolete_feature 80 #define zero_equiv_ampl_too_large 81 #define GPIB_missing 82 #define rise_time_confined_values 83 #define zero_equiv_ampl_negative 84 #define amplitude_gap 85 #define CalibrationMinMaxError_ampl 86 #define CalibrationMinMaxError_pw 87 #define CalibrationMinMaxError_os 88 #define CalibrationMinMaxError_freq 89 #define CalibrationMinMaxError_delay 90 #define CalibrationMinMaxError_burst 91 #define CalibrationMinMaxError_rise 92 #define CalibrationMinMaxError_slew 93 #define Dead_Time_Error 94 #define YES 1 #define NO 0 #define max_commands_in_input 12 #define max_output_length 512 #define max_channels 2 /* DEFINE: misc hardware constraints, based on Avtech hardware */ #define num_out_SRs 4 /* 4 output shift registers */ #define max_channels 2 /* maximum number of instrument channels */ #define max_stored_settings 4 /* how many user settings can be stored in flash, per channel */ #define ampl_ranges 5 #define os_ranges 5 /* must be equal to ampl_ranges now */ #define ampl_polarities 2 #define os_polarities 1 #define points_in_range 10 #define timing_ranges 8 #define timing_polarities 1 #define load_type_ranges 1 #define load_type_polarities 1 #define pwl_ampl_values 0 #define pwl_os_values 1 #define pwl_pw_values 3 #define pwl_delay_values 4 #define pwl_period_values 5 #define pwl_burst_values 6 #define pwl_rise_time_values 7 #define pwl_slew_values 9 #define dac_max 8191 #define All_Programmed 2 #define Being_Programmed 1 #define Not_Programmed 0 #define to_Advance 0 #define to_Delay 1 #define pw_in_out 0 #define pw_normal 1 #define pw_ew_ext 2 #define double_on 1 #define double_off 0 #define pol_norm 0 #define pol_complement 1 #define hold_width 0 #define hold_duty 1 #define output_off 0 #define output_on 1 #define source_internal 0 #define source_external 1 #define source_manual 2 #define source_hold 3 #define source_immediate 4 #define source_external2 5 #define pulse_mode_on 0 #define sin_mode_on 1 #define tri_mode_on 2 #define squ_mode_on 4 #define amp_mode_on 8 #define dc_mode_on 16 #define gate_sync 0 #define gate_async 1 #define gate_low 0 #define gate_high 1 #define amp_mode_normal 0 #define amp_mode_ea 1 #define amp_mode_amplify 2 #define os_mode_normal 0 #define os_mode_eo 1 #define logic_ttl 0 #define logic_ecl 1 #define to_display 0 #define to_computer 1 #define LOCS_ctrl 0 #define LWLS_ctrl 1 #define REMS_ctrl 2 #define RWLS_ctrl 3 #define RS232_ctrl 4 #define TELNET_ctrl 5 #define WEB_ctrl 6 #define ROUTE_PRIMARY 0 #define ROUTE_SECONDARY 1 #define rs232_parity_none 0 // no longer used #define rs232_parity_odd 1 // no longer used #define rs232_parity_even 2 // no longer used #define smallest_allowed_number 1.0e-18 #define zero_equiv_timing 1e-10 #define max_v_dymanic_range 1e6 #define max_attens 8 /* general formatting */ #define remote_digits_after_decimal 4 /* how many digits are returned after decimal by query commands */ // self-cal configs #define NOT_ENABLE_COUNT 0x01 #define ENABLE_COUNT 0x00 #define NOT_LOAD_BUFFERS_CLK 0x00 #define LOAD_BUFFERS_CLK 0x02 #define NOT_CLR_COUNTERS 0x04 #define CLR_COUNTERS 0x00 #define MEAS_PW 0x08 #define MEAS_PRF 0x00 #define MEAS_CH1 0x00 #define MEAS_CH2 0x10 #define COUNTER_BYTE_0 0x00 #define COUNTER_BYTE_1 0x20 #define COUNTER_BYTE_2 0x40 #define COUNTER_BYTE_3 0x60 // hardware default values #define DEFAULT_OUTPUT_ON_DELAY 0.8 // needs at least 800 ms, due to soft-on circuit #define SELF_CAL_REF_FREQ 1e7 // 10 MHz #define SELF_CAL_MIN_COUNT 400 // 1 in 400 // menu stuff #define Main_Menu_On 0 #define Submenu_On 1 #define Submenu1_freq 0 #define Submenu1_delay 100 #define Submenu1_pw 200 #define Submenu1_amp 300 #define Submenu1_offset 400 #define Submenu1_mon 500 #define Submenu1_zout 600 #define Submenu1_loadtype 700 #define Submenu1_output_state 800 #define Submenu1_setup 900 #define Submenu1_rem_loc 1000 #define Submenu1_invert 1100 #define Submenu1_gate 1200 #define Submenu1_memory 1300 #define Submenu2_save 1400 #define Submenu2_load 1500 #define Submenu2_rs232 1600 #define Submenu2_rs232_baud 1700 #define Submenu2_rs232_databits 1800 // no longer used #define Submenu2_rs232_parity 1900 // no longer used #define Submenu2_rs232_stopbits 2000 #define Submenu2_rs232_hardhand 2100 #define Submenu2_rs232_echo 2200 #define Submenu1_logic_level 2300 #define Submenu1_route_primary 2400 #define Submenu1_burst_count 2500 #define Submenu1_burst_time 2600 #define Submenu1_func 2700 #define Submenu1_rise_time 2800 #define Submenu2_gpib_address 2900 #define Submenu1_soft_current_limit 3000 #define Submenu1_route_secondary 3200 #define Submenu1_slew 3300 #define Submenu1_avrq 3400 // must be equal! #define Submenu_maximum_entries 10 #define max_fixed_ampl_points 10 long sec_timer (void); unsigned long long ms_timer (void); #define max_gpib_input_length 512 typedef struct { int parallel_DAC_reg[8]; long shift_reg_out[num_out_SRs]; long last_relay_driver_settings[4]; int oper_enable_register; /* for stat:enable command */ int ques_enable_register; /* for stat:enable command */ int avrq_reg; int last_rise_time_relay_setting; char gpib_input_buffer[max_gpib_input_length]; gchar *pending_output_message; } HWregStruct; typedef struct { int Type_Of_Menu; gboolean Error_Screen; gboolean Nonstd_Display; int Selected_Submenu; } MenuStatusStruct; typedef struct { int update_amp; int update_os; int update_zout; int update_load; } ChangeStruct; typedef struct { int channel; int cal_type; int count; int error; float max_change; float avg_change; int total_errors; float total_max_change; GString *response; } CalStruct; typedef struct { float frequency; /* the global frequency variable */ float delay; /* the global delay variable */ float pw; /* the global pulse width variable */ float amplitude; /* peak-to-peak amplitude */ float offset; /* offset */ float offset_null; /* add to offset to null, if required */ /* not part of sav/rcl, generated by amplitude routines */ float Curr_Mon_value; /* current monitor reading */ float displayed_mon_val; /* used to determine when LCD update is required */ int Curr_Mon_offset; /* current monitor ADC offset */ int zout; /* Zout in ohms, integer */ int hold_setting; /* pw or duty cycle hold when prf changed */ int double_pulse; /* 1=on, 0=off */ int pw_ctrl_mode; /* a/b mode */ int func_mode; /* dc or pulse */ int polarity; /* noninverted or inverted */ int output_state; /* on or off */ int gate_type; /* lo=sync, hi=async */ int trigger_source; /* int, ext, or manual */ int amp_mode; /* normal amplitude control or EA */ int gate_level; /* lo or hi */ float load_type; /* normally 50 or 10000 ohms, for duty cycle limit control */ int test_delay_mode; /* special test mode */ int logic_level; /* ecl or ttl */ int route_primary; /* channel number that is active */ int route_secondary; /* channel number that is active */ int os_mode; /* normal offset control or EO */ int burst_count; /* number of pulses per burst */ float burst_time; /* time between falling edge and next rising edge */ float rise_time; /* time between falling edge and next rising edge */ float soft_current_limit; /* adjustable protection trip-point */ float slew; /* slew rate */ } ChannelStruct; #pragma pack(push) /* push current alignment to stack */ #pragma pack(1) typedef struct { char flash_start; /* 0 - just a handle */ char turn_on_dly; /* 1 */ char logic_level_enabled; /* 2 */ char ChanKey_logic_level; /* 3 */ char model_num_old[32]; /* 4 */ char serial_num[16]; /* 36 */ short fully_programmed; /* 52 */ short gpib_address; /* 54 */ short telnet_session_timeout; /* 56 - timeout in seconds */ char unusedx; /* 58 */ short spare2; /* 59 */ char ChanKey_route; /* 61 */ char on_off_used; /* 62 */ char model_num[64]; /* 63 */ char pcb116c_mon; /* 127 */ char ampl_ranges_for_ch2_only; /* 128 - AVR-EB7-B */ char warn_even_if_output_off; /* 129 */ int baud; /* 130 */ char parity; // no longer used char stopbits; // no longer used char databits; // no longer used char hardhand; char echo; // no longer used char spare1[23]; /* 139 */ short copy_max_channels; /* 162 - copy of max_channels macro */ short telnet_logon_timeout; /* 164 - timeout in seconds */ short spare6; /* 166 */ float output_on_delay; /* 168 */ short channels; /* 172 */ char ChanKey_frequency; /* 174 */ char ChanKey_delay; /* 175 */ char ChanKey_pw; /* 176 */ char ChanKey_amplitude; /* 177 */ char ChanKey_offset; /* 178 */ char ChanKey_Curr_Mon_value; /* 179 */ char ChanKey_Curr_Mon_offset; /* 180 */ char ChanKey_zout; /* 181 */ char ChanKey_hold_setting; /* 182 */ char ChanKey_double_pulse; /* 183 */ char ChanKey_unused; /* 184 */ char ChanKey_func_mode; /* 185 */ char ChanKey_polarity; /* 186 */ char ChanKey_output_state; /* 187 */ char ChanKey_gate_type; /* 188 */ char ChanKey_trigger_source; /* 189 */ char ChanKey_amp_mode; /* 190 */ char ChanKey_gate_level; /* 191 */ char ChanKey_load_type; /* 192 */ char ChanKey_test_delay_mode; /* 193 */ char obs_unused[26]; /* 194 - unused */ char sync_only; /* 220 */ char ChanKey_os_mode; /* 221 */ char switchable_backlight; /* 222 */ char ChanKey_Burst_Count; /* 223 */ char ChanKey_Burst_Time; /* 224 */ char vxi_enabled; /* 225 */ short web_session_timeout; /* 226 - timeout in seconds */ char ChanKey_rise_time; /* 228 */ char ChanKey_current_limit; /* 229 */ char enable_avrq_extra_ampls; /* 230 - use CH2 for IBIAS, */ /* CH3 for VCC1 */ /* CH4 for VCC2 */ /* CH5 for Logic Level */ char ChanKey_slew; /* 231 */ short self_cal_interval; /* 232 */ short self_cal_startups; /* 234 */ short self_cal_pause; /* 236 */ short self_cal_typical_time_min; /* 238 */ short self_cal_typical_time_sec; /* 240 */ char self_cal; /* 242 */ char prf_limiter; /* 243 */ float self_cal_ref_freq; /* 244 */ short self_cal_min_count; /* 248 */ char spare_padding[6]; /* 250 - padding between common and per-channel sections of the */ /* flash eeprom. Adjust size if variables added to common section, */ /* so that per-channel section starts at 256 */ /* [chan][range 0-4][polarity][interpolation point 0-9] */ short ampl_pwl_Vc_norm4095[max_channels][ampl_ranges][ampl_polarities][points_in_range]; float ampl_pwl_amp[max_channels][ampl_ranges][ampl_polarities][points_in_range]; float rcl_frequency[max_channels][max_stored_settings]; float rcl_delay[max_channels][max_stored_settings]; float rcl_pw[max_channels][max_stored_settings]; float rcl_amplitude[max_channels][max_stored_settings]; float rcl_offset[max_channels][max_stored_settings]; short rcl_misc[max_channels][max_stored_settings]; /* another misc is stored below */ short rcl_unused[max_stored_settings]; float mon_vi_ratio[max_channels][5][2]; /* addr 1640 */ float min_ampl[max_channels]; /* addr 1720 */ float max_ampl[max_channels]; /* addr 1728 */ float min_offset[max_channels]; /* addr 1736 */ float max_offset[max_channels]; /* addr 1744 */ float min_vout[max_channels]; /* addr 1752 */ float max_vout[max_channels]; /* addr 1760 */ float min_freq[max_channels]; /* addr 1768 */ float max_freq[max_channels]; /* addr 1776 */ float min_pw[max_channels]; /* addr 1784 */ float max_pw[max_channels]; /* addr 1792 */ float max_delay[max_channels]; /* addr 1800 - see also min_delay (new) */ float propagation_delay[max_channels]; /* addr 1808 */ float delay_shrink[max_channels]; /* addr 1816 */ float ampl_zero_equiv[max_channels]; /* addr 1824 - also sets min ampl magnitude in AVRQ -AHV, -XHV */ float max_duty_low[max_channels]; /* addr 1832 */ float max_duty_high[max_channels]; /* addr 1840 */ float duty_ampl[max_channels]; /* addr 1848 */ float duty_highRL_above_v[max_channels]; /* addr 1856 */ float mon_pw_threshold[max_channels]; /* addr 1864 */ float monitor_step[max_channels]; /* addr 1872 */ char sep_posneg_mon_ratio[max_channels]; /* addr 1880 */ char volt_ctrl_pw[max_channels]; /* addr 1882 */ char voltage_enabled[max_channels]; /* addr 1884 */ char voltage_offset_enabled[max_channels]; /* addr 1886 */ char current_enabled[max_channels]; /* addr 1888 */ char current_offset_enabled[max_channels]; /* addr 1890 */ char switchable_zout[max_channels]; /* addr 1892 */ char dc_mode_allowed[max_channels]; char pw_ab_mode_enabled[max_channels]; /* addr 1896 */ char double_pulse_allowed[max_channels]; char invert_allowed[max_channels]; char ea_enabled[max_channels]; /* addr 1902 */ char switchable_load[max_channels]; char monitor_enabled[max_channels]; /* addr 1906 */ char use_pos_ampl_data_only[max_channels]; char rise_time_min_max_only[max_channels]; /* addr 1910 Formerly ampl_min_max_only. Use fixed_ampl_points instead */ short zout_min[max_channels]; /* addr 1912 */ short os_pwl_Vc_norm4095[max_channels][os_ranges][os_polarities][points_in_range]; /* addr 1916 */ float os_pwl_amp[max_channels][os_ranges][os_polarities][points_in_range]; /* addr 2116 */ short ampl_DAC[max_channels]; /* addr 2516 */ short os_DAC[max_channels]; /* addr 2520 */ short polarity_xtra_rly[max_channels]; /* addr 2524 */ char fixed_pw[max_channels]; /* addr 2528 */ char eo_enabled[max_channels]; /* addr 2530 */ char ext_amplify_enabled[max_channels]; /* addr 2532 */ char volt_ctrl_delay[max_channels]; /* addr 2534 */ float rise_time_pwl_time[max_channels][ampl_ranges][ampl_polarities][points_in_range]; /* addr 2536 */ short ext_amplify_xtra_rly[max_channels]; /* addr 3336 */ short ea_xtra_rly[max_channels]; /* addr 3340 */ short rcl_misc2[max_channels][max_stored_settings]; /* addr 3344 */ short pw_pwl_Vc_norm4095[max_channels][timing_ranges][timing_polarities][points_in_range]; /* addr 3360 */ float pw_pwl_time[max_channels][timing_ranges][timing_polarities][points_in_range]; /* addr 3680 */ short delay_pwl_Vc_norm4095[max_channels][timing_ranges][timing_polarities][points_in_range]; /* addr 4320 */ float delay_pwl_time[max_channels][timing_ranges][timing_polarities][points_in_range]; short period_pwl_Vc_norm4095[max_channels][timing_ranges][timing_polarities][points_in_range]; /* addr 5280 */ float period_pwl_time[max_channels][timing_ranges][timing_polarities][points_in_range]; float distort_X[max_channels]; /* distortion = Z + X / (Ampl + Y). */ float distort_Y[max_channels]; float distort_Z[max_channels]; float distort_max_ampl[max_channels]; /* Clamp distortion above this amplitude. */ float distort_max_os[max_channels]; /* PW is not distorted for offsets above this. */ char ampl_os_ranges_related[max_channels]; /* for 156A units where the offset affects the choice of amplitude range */ char ampl_coupled_to_os[max_channels]; /* for 1011-OT units where increasing offset would decrease ampl if not corrected */ float relay_delay_in_sec; /* relay bounce time */ float extended_relay_delay_in_sec; /* allow capacitor banks to settle after range change */ short max_burst_count[max_channels]; /* 6292 - max pulses per burst, normally 500 */ float max_burst_duty[max_channels]; /* 6296 - maximum duty cycle within burst */ float min_burst_gap[max_channels]; /* 6304 - minimum burst gap */ float max_burst_gap[max_channels]; /* 6312 - maximum burst gap */ float min_burst_per[max_channels]; /* 6320 */ char is_func_gen[max_channels]; /* 6328 - is this a function generator? */ char freq_dac[max_channels]; /* 6330 - DAC used by function generator frequency control circuit */ char is_monocycle[max_channels]; /* 6332 - generate control voltage for monocycle spacing, using CH2 PW calibration */ char monocycle_dac[max_channels]; /* 6334 */ short burst_pwl_Vc_norm4095[max_channels][timing_ranges][timing_polarities][points_in_range]; /* 6336 */ float burst_pwl_time[max_channels][timing_ranges][timing_polarities][points_in_range]; /* 6656 */ float pulse_width_pol_tweak[max_channels][ampl_polarities]; /* 7296 - allow for PW shift with polarity */ short rcl_burst_count[max_channels][max_stored_settings]; /* 7312 - rcl/sav data for burst mode */ float rcl_burst_time[max_channels][max_stored_settings]; /* 7328 - rcl/sav data for burst mode */ char burst_func[max_channels]; /* 7360 - is this a function generator with burst mode? */ short initial_dac_settings[8]; /* 7362 */ char fixed_rise_time[max_channels]; /* 7378 */ char rise_time_dac[max_channels]; /* 7380 */ float min_rise_time[max_channels]; /* 7382 */ float max_rise_time[max_channels]; /* 7390 */ short output_timer[max_channels]; /* 7398 - turn off output after this time, in seconds */ short pw_dac[max_channels]; /* 7402 - for voltage-controlled PW only */ float rcl_rise_time[max_channels][max_stored_settings]; /* 7406 - rcl/sav data for rise time */ short rise_time_pwl_Vc_norm4095[max_channels][ampl_ranges][ampl_polarities][points_in_range]; /* 7438 */ short vcc1_pwl_Vc_norm4095[1][1][1][points_in_range]; /* no longer used */ float vcc1_pwl_amp[1][1][1][points_in_range]; /* no longer used */ short vcc2_pwl_Vc_norm4095[1][1][1][points_in_range]; /* no longer used */ float vcc2_pwl_amp[1][1][1][points_in_range]; /* no longer used */ float rcl_vcc1[max_channels][max_stored_settings]; /* no longer used */ float rcl_vcc2[max_channels][max_stored_settings]; /* no longer used */ float rcl_vlogic[max_channels][max_stored_settings]; /* no longer used */ float vcc1_max[max_channels]; /* no longer used */ float vcc2_min[max_channels]; /* no longer used */ float vcc2_max[max_channels]; /* no longer used */ float max_duty_mid1[max_channels]; /* addr 8078 - for AVO-8D3-B, etc */ float duty_ampl_mid1[max_channels]; /* addr 8086 */ float max_duty_mid2[max_channels]; /* addr 8094 */ float duty_ampl_mid2[max_channels]; /* addr 8102 */ float distort_fully_below_ampl[max_channels]; /* addr 8110 - used with pulse_width_pol_tweak, see S/N 13453 */ char spare_char[272]; /* 8118 */ float dead_time[max_channels]; /* 8390 */ float current_limit_pulse_mode[max_channels]; /* 8398 */ float current_limit_dc_mode[max_channels]; /* 8406 */ float current_limit_full_scale[max_channels]; /* 8414 */ char current_limit_dac[max_channels]; /* 8422 */ char hard_current_limit_enabled[max_channels]; /* 8424 */ short wait_states_after_sock_init; /* 8426 - no longer used */ char aux_error_message[40]; /* 8428 */ short delay_dac[max_channels]; /* 8468 */ float min_delay[max_channels]; /* 8472 */ short invert_by_default[max_channels]; /* 8480 - set high for logically complemented outputs */ char soft_current_limit_enabled[max_channels]; /* 8484 */ float min_soft_current_limit[max_channels]; /* 8486 */ float max_soft_current_limit[max_channels]; /* 8494 */ float rcl_soft_current_limit[max_channels][max_stored_settings]; /* 8502 */ float max_avg_ampl[max_channels]; /* 8534 */ char pol_relay_high_for_pos[max_channels]; /* 8542 */ float special_pw_range_minimum[max_channels]; /* 8544 - originally for AVPP-2A-B-P-ILA, 1us-1ms range */ short zout_max[max_channels]; /* addr 8552 */ float pw_range_pol_tweaks[max_channels][timing_ranges][ampl_polarities]; /* addr 8556 */ float pw_shift_below_this_ampl[max_channels]; /* addr 8684 */ float pw_shift_below_ampl_by[max_channels]; /* addr 8692 */ /* AVRQ special configs */ char spare_config1[max_channels]; /* addr 8700 */ char load_type_dac[max_channels]; /* addr 8702 */ float sparex1[max_channels]; /* addr 8704 */ float sparex2[max_channels]; /* addr 8712 */ float rcl_sparex3[max_channels][max_stored_settings]; /* addr 8720 */ short load_type_pwl_Vc_norm4095[max_channels][load_type_ranges][load_type_polarities][points_in_range]; /* 8752 */ float load_type_pwl_time[max_channels][load_type_ranges][load_type_polarities][points_in_range]; /* 8792 */ char pcb_203a_rise_time[max_channels]; /* addr 8872 */ float ampl_min_abs_value[max_channels]; /* addr 8874 */ float ampl_step_size[max_channels]; /* addr 8882 */ /* -DIPFP special configs */ short routing_required[max_channels]; /* addr 8890 - 0 (none), 1 (output), 2 (anode and cathode) */ short routing_max_pins[max_channels]; /* addr 8894 */ short rcl_route_primary[max_channels][max_stored_settings]; /* addr 8898 */ short rcl_route_secondary[max_channels][max_stored_settings]; /* addr 8914 */ /* AVRZ-5 special tweak */ float delay_pol_tweak[max_channels][ampl_polarities]; /* addr 8930 - allow for delay shift with polarity */ float duty_highRL_below_v[max_channels]; /* addr 8946 */ short old_low_load_type[max_channels]; /* addr 8954 - normally 50 */ short old_high_load_type[max_channels]; /* addr 8958 - normally 10000 */ char slew_dac[max_channels]; /* addr 8962 */ char curr_slew[max_channels]; /* addr 8964 */ float min_slew[max_channels]; /* addr 8966 */ float max_slew[max_channels]; /* addr 8974 */ float rcl_slew[max_channels][max_stored_settings]; /* addr 8982 */ short slew_pwl_Vc_norm4095[max_channels][timing_ranges][timing_polarities][points_in_range]; /* addr 9014 */ float slew_pwl_time[max_channels][timing_ranges][timing_polarities][points_in_range]; /* addr 9334 */ short fix_pw_dac_val[max_channels]; /* addr 9974 */ float rcl_load[max_channels][max_stored_settings]; /* addr 9978 */ float max_high_rl_duty[max_channels]; /* addr 10010 */ float max_peak_power[max_channels]; /* addr 10018 */ float low_load_type[max_channels]; /* addr 10026 - normally 50 */ float high_load_type[max_channels]; /* addr 10034 - normally 10000 */ float max_avg_power[max_channels]; /* addr 10042 */ float max_pw_pol[max_channels][ampl_polarities]; /* addr 10050 - over-rides normal max_pw */ char use_high_ampl_ranges_for_high_pw_ranges[max_channels]; /* addr 10066 - for AVMP-4, no longer used */ char couple_first_N_pw_ranges_to_ampl_ranges[max_channels]; // addr 10068 - use this instead (N=1) */ // for example, if N = 2 (as for AVR-E3-B-R5-N-M5) // PG A = pw range 0, ampl range 0 // PG B = pw range 1, ampl range 1 // PG C = pw range 2+, ampl range 2 // for example, if N = 1 (as for AVMP-4-B) // PG A = pw range 0, ampl range 0 // PG B = pw range 1+, ampl range 1 // AVMP-4-B is different than AVPP units, because lowest PW range is NOT voltage controlled float attenuators[max_channels][max_attens]; // addr 10070 // smallest attenuators first // value = magnitude of attenuation. // for example, for 20 dB, use 10.0 // for 15 dB, use 5.62 // for 10 dB, use 3.16 float atten_percent_max_ampl[max_channels]; // addr 10134 - normally 0.93 // don't use higher ampls in AVPs, // where PW shifts near max ampl char ew_enabled[max_channels]; /* addr 10142 */ short ew_xtra_rly[max_channels]; /* addr 10144 */ char ignore_ampl_polarity[max_channels]; /* addr 10148, for AVR-D3-B-MS1 CH2 */ char I2C_port_for_CH2_delay; /* addr 10150, for AVIR-2-B-PN-DP-KMPC-VXI */ char sparex4; char force_monotonic_ext_trig_delay[max_channels]; /* addr 10152 - maybe for AVL-5-B-PN-TR-DP-KMPD */ float max_freq_for_high_ot[max_channels]; /* addr 10154, for 1011-OT */ float high_ot[max_channels]; /* addr 10162, for 1011-OT */ float fixed_ampl_points[max_channels][max_fixed_ampl_points]; /* addr 10170, for AVR-D2, AVRQ-4 */ char ext2_enabled[max_channels]; /* addr 10250, for KMPF */ char toggle_trig_at_boot[max_channels]; /* addr 10252, for IL710 units */ char sequential_attenuators[max_channels]; /* addr 10254, for AVRZ-5W-B-LVA style of 3 identical attenuators */ char flash_end; } FlashStruct; #pragma pack(pop) typedef struct { float err_min_freq[max_channels]; /* current minimum-allowed frequency */ float err_max_freq[max_channels]; /* current maximum-allowed frequency */ float err_min_pw[max_channels]; /* current minimum-allowed pulse width */ float err_max_pw[max_channels]; /* current maximum-allowed pulse width */ float err_min_delay[max_channels]; /* current minimum-allowed delay */ float err_max_delay[max_channels]; /* current maximum-allowed delay */ float err_min_ampl[max_channels]; /* current minimum-allowed amplitude */ float err_max_ampl[max_channels]; /* current maximum-allowed amplitude */ float err_min_offset[max_channels]; /* current minimum-allowed offset */ float err_max_offset[max_channels]; /* current maximum-allowed offset */ int err_max_burst_count[max_channels]; /* current maximum-allowed burst current */ float err_min_burst_time[max_channels]; /* current minimum-allowed burst spacing */ float err_max_burst_time[max_channels]; /* current maximum-allowed burst spacing */ float err_min_rise_time[max_channels]; /* current minimum-allowed burst spacing */ float err_max_rise_time[max_channels]; /* current maximum-allowed burst spacing */ float err_min_soft_current_limit[max_channels]; float err_max_soft_current_limit[max_channels]; float err_min_slew[max_channels]; float err_max_slew[max_channels]; float err_min_load_type[max_channels]; float err_max_load_type[max_channels]; float composite_min_burst_time[max_channels]; /* minimum ever possible gap, taking into account all constraints */ } ConstraintsStruct; #define error_queue_length 512 typedef struct { int error_queue[error_queue_length+1]; int number_of_errors; } ErrorStruct; // note flags with non-zero default/reset values in globals.c // for example, do_check_settings=1 by default // These flags are reset by Main_Rst typedef struct { int extended_ampl_min_max; int do_check_settings; int flash_writes_suspended; int force_output_fully_off; int attenuators_enabled; } FlagStruct; // These flags are NOT reset by Main_Rst, and default to 0 typedef struct { int shutdown_started; int flash_write_in_progress; int startup_complete; } SysFlagStruct; typedef struct { long startup_timer_value; long last_activity_at[max_channels]; long normal_relay_bounce_time_in_milliseconds; long Relay_Switching_Delay_in_Milliseconds; } TimeStruct; // maximum number of ssh/getty sessions. // same as max number of vxi sessions #define MAX_SESSIONS 8 typedef struct { int terminal_connections; int vxi_connections; int vxi_service_request; int gpib_remote; int gpib_lock; int vxi_panel_lock; } RemoteStruct; typedef struct { bool beaglebone; bool olimex; bool has_gpib; bool has_i2c; bool has_gpmc; bool has_gpio; char remount_point[128]; char firmware[16]; } HWDetectStruct; #define NO_SERVER_LOCKED -1 typedef struct { int command_in_progress; int locked_network_server; } LockStruct; typedef struct { ConstraintsStruct Constraints; ChannelStruct ChannelState[max_channels]; FlashStruct Flash; HWregStruct Registers; ChangeStruct Changes; ErrorStruct Errors; FlagStruct Flags; FlagStruct DefaultFlags; SysFlagStruct Sys; TimeStruct Timers; MenuStatusStruct MenuStatus; RemoteStruct Remote; HWDetectStruct HWDetect; LockStruct VxiLocks; } GlobalStruct; extern GlobalStruct globals; #endif