# 1 "arch/arm/boot/dts/am335x-boneblack-spi0.dts"
# 1 "<built-in>"
# 1 "<command-line>"
# 1 "arch/arm/boot/dts/am335x-boneblack-spi0.dts"







/dts-v1/;

# 1 "arch/arm/boot/dts/am33xx.dtsi" 1
# 11 "arch/arm/boot/dts/am33xx.dtsi"
# 1 "./arch/arm/boot/dts/include/dt-bindings/gpio/gpio.h" 1
# 12 "arch/arm/boot/dts/am33xx.dtsi" 2
# 1 "./arch/arm/boot/dts/include/dt-bindings/pinctrl/am33xx.h" 1







# 1 "./arch/arm/boot/dts/include/dt-bindings/pinctrl/omap.h" 1
# 9 "./arch/arm/boot/dts/include/dt-bindings/pinctrl/am33xx.h" 2
# 13 "arch/arm/boot/dts/am33xx.dtsi" 2

# 1 "arch/arm/boot/dts/skeleton.dtsi" 1






/ {
 #address-cells = <1>;
 #size-cells = <1>;
 chosen { };
 aliases { };
 memory { device_type = "memory"; reg = <0 0>; };
};
# 15 "arch/arm/boot/dts/am33xx.dtsi" 2

/ {
 compatible = "ti,am33xx";
 interrupt-parent = <&intc>;

 aliases {
  i2c0 = &i2c0;
  i2c1 = &i2c1;
  i2c2 = &i2c2;
  serial0 = &uart0;
  serial1 = &uart1;
  serial2 = &uart2;
  serial3 = &uart3;
  serial4 = &uart4;
  serial5 = &uart5;
  d_can0 = &dcan0;
  d_can1 = &dcan1;
  usb0 = &usb0;
  usb1 = &usb1;
  phy0 = &usb0_phy;
  phy1 = &usb1_phy;
  ethernet0 = &cpsw_emac0;
  ethernet1 = &cpsw_emac1;
 };

 cpus {
  #address-cells = <1>;
  #size-cells = <0>;
  cpu@0 {
   compatible = "arm,cortex-a8";
   device_type = "cpu";
   reg = <0>;

   voltage-tolerance = <2>;

   clocks = <&dpll_mpu_ck>;
   clock-names = "cpu";

   clock-latency = <300000>;
  };
 };

 pmu {
  compatible = "arm,cortex-a8-pmu";
  interrupts = <3>;
 };





 soc {
  compatible = "ti,omap-infra";
  mpu {
   compatible = "ti,omap3-mpu";
   ti,hwmods = "mpu";
   sram = <&ocmcram>;
  };
 };
# 82 "arch/arm/boot/dts/am33xx.dtsi"
 ocp: ocp {
  compatible = "simple-bus";
  #address-cells = <1>;
  #size-cells = <1>;
  ranges;
  ti,hwmods = "l3_main";

  l4_wkup: l4_wkup@44c00000 {
   compatible = "ti,am3-l4-wkup", "simple-bus";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0x44c00000 0x280000>;

   wkup_m3: wkup_m3@100000 {
    compatible = "ti,am3352-wkup-m3";
    reg = <0x100000 0x4000>,
          <0x180000 0x2000>;
    reg-names = "umem", "dmem";
    ti,hwmods = "wkup_m3";
    ti,pm-firmware = "am335x-pm-firmware.elf";
   };

   prcm: prcm@200000 {
    compatible = "ti,am3-prcm";
    reg = <0x200000 0x4000>;

    prcm_clocks: clocks {
     #address-cells = <1>;
     #size-cells = <0>;
    };

    prcm_clockdomains: clockdomains {
    };
   };

   scm: scm@210000 {
    compatible = "ti,am3-scm", "simple-bus";
    reg = <0x210000 0x2000>;
    #address-cells = <1>;
    #size-cells = <1>;
    ranges = <0 0x210000 0x2000>;

    am33xx_pinmux: pinmux@800 {
     compatible = "pinctrl-single";
     reg = <0x800 0x238>;
     #address-cells = <1>;
     #size-cells = <0>;
     pinctrl-single,register-width = <32>;
     pinctrl-single,function-mask = <0x7f>;
    };

    scm_conf: scm_conf@0 {
     compatible = "syscon";
     reg = <0x0 0x800>;
     #address-cells = <1>;
     #size-cells = <1>;

     scm_clocks: clocks {
      #address-cells = <1>;
      #size-cells = <0>;
     };
    };

    wkup_m3_ipc: wkup_m3_ipc@1324 {
     compatible = "ti,am3352-wkup-m3-ipc";
     reg = <0x1324 0x24>;
     interrupts = <78>;
     ti,rproc = <&wkup_m3>;
     mboxes = <&mailbox &mbox_wkupm3>;
    };

    edma_xbar: dma-router@f90 {
     compatible = "ti,am335x-edma-crossbar";
     reg = <0xf90 0x40>;
     #dma-cells = <3>;
     dma-requests = <32>;
     dma-masters = <&edma>;
    };

    scm_clockdomains: clockdomains {
    };
   };
  };

  intc: interrupt-controller@48200000 {
   compatible = "ti,am33xx-intc";
   interrupt-controller;
   #interrupt-cells = <1>;
   reg = <0x48200000 0x1000>;
  };

  edma: edma@49000000 {
   compatible = "ti,edma3-tpcc";
   ti,hwmods = "tpcc";
   reg = <0x49000000 0x10000>;
   reg-names = "edma3_cc";
   interrupts = <12 13 14>;
   interrupt-names = "edma3_ccint", "emda3_mperr",
       "edma3_ccerrint";
   dma-requests = <64>;
   #dma-cells = <2>;

   ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
       <&edma_tptc2 0>;

   ti,edma-memcpy-channels = <20 21>;
  };

  edma_tptc0: tptc@49800000 {
   compatible = "ti,edma3-tptc";
   ti,hwmods = "tptc0";
   reg = <0x49800000 0x100000>;
   interrupts = <112>;
   interrupt-names = "edma3_tcerrint";
  };

  edma_tptc1: tptc@49900000 {
   compatible = "ti,edma3-tptc";
   ti,hwmods = "tptc1";
   reg = <0x49900000 0x100000>;
   interrupts = <113>;
   interrupt-names = "edma3_tcerrint";
  };

  edma_tptc2: tptc@49a00000 {
   compatible = "ti,edma3-tptc";
   ti,hwmods = "tptc2";
   reg = <0x49a00000 0x100000>;
   interrupts = <114>;
   interrupt-names = "edma3_tcerrint";
  };

  emif: emif@4c000000 {
   compatible = "ti,emif-am3352";
   reg = <0x4C000000 0x1000>;
   sram = <&ocmcram>;
  };

  gpio0: gpio@44e07000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio1";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x44e07000 0x1000>;
   interrupts = <96>;
  };

  gpio1: gpio@4804c000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio2";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x4804c000 0x1000>;
   interrupts = <98>;
  };

  gpio2: gpio@481ac000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio3";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x481ac000 0x1000>;
   interrupts = <32>;
  };

  gpio3: gpio@481ae000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio4";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x481ae000 0x1000>;
   interrupts = <62>;
  };

  uart0: serial@44e09000 {
   compatible = "ti,am3352-uart", "ti,omap3-uart";
   ti,hwmods = "uart1";
   clock-frequency = <48000000>;
   reg = <0x44e09000 0x2000>;
   interrupts = <72>;
   status = "disabled";
   dmas = <&edma 26 0>, <&edma 27 0>;
   dma-names = "tx", "rx";
  };

  uart1: serial@48022000 {
   compatible = "ti,am3352-uart", "ti,omap3-uart";
   ti,hwmods = "uart2";
   clock-frequency = <48000000>;
   reg = <0x48022000 0x2000>;
   interrupts = <73>;
   status = "disabled";
   dmas = <&edma 28 0>, <&edma 29 0>;
   dma-names = "tx", "rx";
  };

  uart2: serial@48024000 {
   compatible = "ti,am3352-uart", "ti,omap3-uart";
   ti,hwmods = "uart3";
   clock-frequency = <48000000>;
   reg = <0x48024000 0x2000>;
   interrupts = <74>;
   status = "disabled";
   dmas = <&edma 30 0>, <&edma 31 0>;
   dma-names = "tx", "rx";
  };

  uart3: serial@481a6000 {
   compatible = "ti,am3352-uart", "ti,omap3-uart";
   ti,hwmods = "uart4";
   clock-frequency = <48000000>;
   reg = <0x481a6000 0x2000>;
   interrupts = <44>;
   status = "disabled";
  };

  uart4: serial@481a8000 {
   compatible = "ti,am3352-uart", "ti,omap3-uart";
   ti,hwmods = "uart5";
   clock-frequency = <48000000>;
   reg = <0x481a8000 0x2000>;
   interrupts = <45>;
   status = "disabled";
  };

  uart5: serial@481aa000 {
   compatible = "ti,am3352-uart", "ti,omap3-uart";
   ti,hwmods = "uart6";
   clock-frequency = <48000000>;
   reg = <0x481aa000 0x2000>;
   interrupts = <46>;
   status = "disabled";
  };

  i2c0: i2c@44e0b000 {
   compatible = "ti,omap4-i2c";
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c1";
   reg = <0x44e0b000 0x1000>;
   interrupts = <70>;
   status = "disabled";
  };

  i2c1: i2c@4802a000 {
   compatible = "ti,omap4-i2c";
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c2";
   reg = <0x4802a000 0x1000>;
   interrupts = <71>;
   status = "disabled";
  };

  i2c2: i2c@4819c000 {
   compatible = "ti,omap4-i2c";
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c3";
   reg = <0x4819c000 0x1000>;
   interrupts = <30>;
   status = "disabled";
  };

  mmc1: mmc@48060000 {
   compatible = "ti,omap4-hsmmc";
   ti,hwmods = "mmc1";
   ti,dual-volt;
   ti,needs-special-reset;
   ti,needs-special-hs-handling;
   dmas = <&edma_xbar 24 0 0
    &edma_xbar 25 0 0>;
   dma-names = "tx", "rx";
   interrupts = <64>;
   interrupt-parent = <&intc>;
   reg = <0x48060000 0x1000>;
   status = "disabled";
  };

  mmc2: mmc@481d8000 {
   compatible = "ti,omap4-hsmmc";
   ti,hwmods = "mmc2";
   ti,needs-special-reset;
   dmas = <&edma 2 0
    &edma 3 0>;
   dma-names = "tx", "rx";
   interrupts = <28>;
   interrupt-parent = <&intc>;
   reg = <0x481d8000 0x1000>;
   status = "disabled";
  };

  mmc3: mmc@47810000 {
   compatible = "ti,omap4-hsmmc";
   ti,hwmods = "mmc3";
   ti,needs-special-reset;
   interrupts = <29>;
   interrupt-parent = <&intc>;
   reg = <0x47810000 0x1000>;
   status = "disabled";
  };

  hwspinlock: spinlock@480ca000 {
   compatible = "ti,omap4-hwspinlock";
   reg = <0x480ca000 0x1000>;
   ti,hwmods = "spinlock";
   #hwlock-cells = <1>;
  };

  wdt2: wdt@44e35000 {
   compatible = "ti,omap3-wdt";
   ti,hwmods = "wd_timer2";
   reg = <0x44e35000 0x1000>;
   interrupts = <91>;
  };

  dcan0: can@481cc000 {
   compatible = "ti,am3352-d_can";
   ti,hwmods = "d_can0";
   reg = <0x481cc000 0x2000>;
   clocks = <&dcan0_fck>;
   clock-names = "fck";
   syscon-raminit = <&scm_conf 0x644 0>;
   interrupts = <52>;
   status = "disabled";
  };

  dcan1: can@481d0000 {
   compatible = "ti,am3352-d_can";
   ti,hwmods = "d_can1";
   reg = <0x481d0000 0x2000>;
   clocks = <&dcan1_fck>;
   clock-names = "fck";
   syscon-raminit = <&scm_conf 0x644 1>;
   interrupts = <55>;
   status = "disabled";
  };

  mailbox: mailbox@480C8000 {
   compatible = "ti,omap4-mailbox";
   reg = <0x480C8000 0x200>;
   interrupts = <77>;
   ti,hwmods = "mailbox";
   #mbox-cells = <1>;
   ti,mbox-num-users = <4>;
   ti,mbox-num-fifos = <8>;
   mbox_wkupm3: wkup_m3 {
    ti,mbox-send-noirq;
    ti,mbox-tx = <0 0 0>;
    ti,mbox-rx = <0 0 3>;
   };
   mbox_pru0: mbox_pru0 {
    ti,mbox-tx = <2 0 0>;
    ti,mbox-rx = <3 0 0>;
   };
   mbox_pru1: mbox_pru1 {
    ti,mbox-tx = <4 0 0>;
    ti,mbox-rx = <5 0 0>;
   };
  };

  timer1: timer@44e31000 {
   compatible = "ti,am335x-timer-1ms";
   reg = <0x44e31000 0x400>;
   interrupts = <67>;
   ti,hwmods = "timer1";
   ti,timer-alwon;
  };

  timer2: timer@48040000 {
   compatible = "ti,am335x-timer";
   reg = <0x48040000 0x400>;
   interrupts = <68>;
   ti,hwmods = "timer2";
  };

  timer3: timer@48042000 {
   compatible = "ti,am335x-timer";
   reg = <0x48042000 0x400>;
   interrupts = <69>;
   ti,hwmods = "timer3";
  };

  timer4: timer@48044000 {
   compatible = "ti,am335x-timer";
   reg = <0x48044000 0x400>;
   interrupts = <92>;
   ti,hwmods = "timer4";
   ti,timer-pwm;
  };

  timer5: timer@48046000 {
   compatible = "ti,am335x-timer";
   reg = <0x48046000 0x400>;
   interrupts = <93>;
   ti,hwmods = "timer5";
   ti,timer-pwm;
  };

  timer6: timer@48048000 {
   compatible = "ti,am335x-timer";
   reg = <0x48048000 0x400>;
   interrupts = <94>;
   ti,hwmods = "timer6";
   ti,timer-pwm;
  };

  timer7: timer@4804a000 {
   compatible = "ti,am335x-timer";
   reg = <0x4804a000 0x400>;
   interrupts = <95>;
   ti,hwmods = "timer7";
   ti,timer-pwm;
  };

  rtc: rtc@44e3e000 {
   compatible = "ti,am3352-rtc", "ti,da830-rtc";
   reg = <0x44e3e000 0x1000>;
   interrupts = <75
          76>;
   ti,hwmods = "rtc";
  };

  cppi41dma: dma-controller@47402000 {
   compatible = "ti,am3359-cppi41";
   reg = <0x47400000 0x1000
     0x47402000 0x1000
     0x47403000 0x1000
     0x47404000 0x4000>;
   reg-names = "glue", "controller", "scheduler", "queuemgr";
   interrupts = <17>;
   interrupt-names = "glue";
   #dma-cells = <2>;
   #dma-channels = <30>;
   #dma-requests = <256>;
   status = "disabled";
  };

  spi0: spi@48030000 {
   compatible = "ti,omap4-mcspi";
   #address-cells = <1>;
   #size-cells = <0>;
   reg = <0x48030000 0x400>;
   interrupts = <65>;
   ti,spi-num-cs = <2>;
   ti,hwmods = "spi0";
   dmas = <&edma 16 0
    &edma 17 0
    &edma 18 0
    &edma 19 0>;
   dma-names = "tx0", "rx0", "tx1", "rx1";
   status = "disabled";
  };

  spi1: spi@481a0000 {
   compatible = "ti,omap4-mcspi";
   #address-cells = <1>;
   #size-cells = <0>;
   reg = <0x481a0000 0x400>;
   interrupts = <125>;
   ti,spi-num-cs = <2>;
   ti,hwmods = "spi1";
   dmas = <&edma 42 0
    &edma 43 0
    &edma 44 0
    &edma 45 0>;
   dma-names = "tx0", "rx0", "tx1", "rx1";
   status = "disabled";
  };

  usb: usb@47400000 {
   compatible = "ti,am33xx-usb";
   reg = <0x47400000 0x1000>;
   ranges;
   #address-cells = <1>;
   #size-cells = <1>;
   ti,hwmods = "usb_otg_hs";
   status = "disabled";

   usb_ctrl_mod: control@44e10620 {
    compatible = "ti,am335x-usb-ctrl-module";
    reg = <0x44e10620 0x10
     0x44e10648 0x4>;
    reg-names = "phy_ctrl", "wakeup";
    status = "disabled";
   };

   usb0_phy: usb-phy@47401300 {
    compatible = "ti,am335x-usb-phy";
    reg = <0x47401300 0x100>;
    reg-names = "phy";
    status = "disabled";
    ti,ctrl_mod = <&usb_ctrl_mod>;
   };

   usb0: usb@47401000 {
    compatible = "ti,musb-am33xx";
    status = "disabled";
    reg = <0x47401400 0x400
     0x47401000 0x200>;
    reg-names = "mc", "control";

    interrupts = <18>;
    interrupt-names = "mc";
    dr_mode = "otg";
    mentor,multipoint = <1>;
    mentor,num-eps = <16>;
    mentor,ram-bits = <12>;
    mentor,power = <500>;
    phys = <&usb0_phy>;

    dmas = <&cppi41dma 0 0 &cppi41dma 1 0
     &cppi41dma 2 0 &cppi41dma 3 0
     &cppi41dma 4 0 &cppi41dma 5 0
     &cppi41dma 6 0 &cppi41dma 7 0
     &cppi41dma 8 0 &cppi41dma 9 0
     &cppi41dma 10 0 &cppi41dma 11 0
     &cppi41dma 12 0 &cppi41dma 13 0
     &cppi41dma 14 0 &cppi41dma 0 1
     &cppi41dma 1 1 &cppi41dma 2 1
     &cppi41dma 3 1 &cppi41dma 4 1
     &cppi41dma 5 1 &cppi41dma 6 1
     &cppi41dma 7 1 &cppi41dma 8 1
     &cppi41dma 9 1 &cppi41dma 10 1
     &cppi41dma 11 1 &cppi41dma 12 1
     &cppi41dma 13 1 &cppi41dma 14 1>;
    dma-names =
     "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
     "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
     "rx14", "rx15",
     "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
     "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
     "tx14", "tx15";
   };

   usb1_phy: usb-phy@47401b00 {
    compatible = "ti,am335x-usb-phy";
    reg = <0x47401b00 0x100>;
    reg-names = "phy";
    status = "disabled";
    ti,ctrl_mod = <&usb_ctrl_mod>;
   };

   usb1: usb@47401800 {
    compatible = "ti,musb-am33xx";
    status = "disabled";
    reg = <0x47401c00 0x400
     0x47401800 0x200>;
    reg-names = "mc", "control";
    interrupts = <19>;
    interrupt-names = "mc";
    dr_mode = "otg";
    mentor,multipoint = <1>;
    mentor,num-eps = <16>;
    mentor,ram-bits = <12>;
    mentor,power = <500>;
    phys = <&usb1_phy>;

    dmas = <&cppi41dma 15 0 &cppi41dma 16 0
     &cppi41dma 17 0 &cppi41dma 18 0
     &cppi41dma 19 0 &cppi41dma 20 0
     &cppi41dma 21 0 &cppi41dma 22 0
     &cppi41dma 23 0 &cppi41dma 24 0
     &cppi41dma 25 0 &cppi41dma 26 0
     &cppi41dma 27 0 &cppi41dma 28 0
     &cppi41dma 29 0 &cppi41dma 15 1
     &cppi41dma 16 1 &cppi41dma 17 1
     &cppi41dma 18 1 &cppi41dma 19 1
     &cppi41dma 20 1 &cppi41dma 21 1
     &cppi41dma 22 1 &cppi41dma 23 1
     &cppi41dma 24 1 &cppi41dma 25 1
     &cppi41dma 26 1 &cppi41dma 27 1
     &cppi41dma 28 1 &cppi41dma 29 1>;
    dma-names =
     "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
     "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
     "rx14", "rx15",
     "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
     "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
     "tx14", "tx15";
   };
  };

  epwmss0: epwmss@48300000 {
   compatible = "ti,am33xx-pwmss";
   reg = <0x48300000 0x10>;
   ti,hwmods = "epwmss0";
   #address-cells = <1>;
   #size-cells = <1>;
   status = "disabled";
   ranges = <0x48300100 0x48300100 0x80
      0x48300180 0x48300180 0x80
      0x48300200 0x48300200 0x80>;

   ecap0: ecap@48300100 {
    compatible = "ti,am33xx-ecap";
    #pwm-cells = <3>;
    reg = <0x48300100 0x80>;
    interrupts = <31>;
    interrupt-names = "ecap0";
    ti,hwmods = "ecap0";
    status = "disabled";
   };

   ehrpwm0: ehrpwm@48300200 {
    compatible = "ti,am33xx-ehrpwm";
    #pwm-cells = <3>;
    reg = <0x48300200 0x80>;
    ti,hwmods = "ehrpwm0";
    status = "disabled";
   };

   eqep0: eqep@0x48300180 {
    compatible = "ti,am33xx-eqep";
    reg = <0x48300180 0x80>;
    interrupt-parent = <&intc>;
    interrupts = <79>;
    ti,hwmods = "eqep0";
    status = "disabled";
   };
  };

  epwmss1: epwmss@48302000 {
   compatible = "ti,am33xx-pwmss";
   reg = <0x48302000 0x10>;
   ti,hwmods = "epwmss1";
   #address-cells = <1>;
   #size-cells = <1>;
   status = "disabled";
   ranges = <0x48302100 0x48302100 0x80
      0x48302180 0x48302180 0x80
      0x48302200 0x48302200 0x80>;

   ecap1: ecap@48302100 {
    compatible = "ti,am33xx-ecap";
    #pwm-cells = <3>;
    reg = <0x48302100 0x80>;
    interrupts = <47>;
    interrupt-names = "ecap1";
    ti,hwmods = "ecap1";
    status = "disabled";
   };

   ehrpwm1: ehrpwm@48302200 {
    compatible = "ti,am33xx-ehrpwm";
    #pwm-cells = <3>;
    reg = <0x48302200 0x80>;
    ti,hwmods = "ehrpwm1";
    status = "disabled";
   };

   eqep1: eqep@0x48302180 {
    compatible = "ti,am33xx-eqep";
    reg = <0x48302180 0x80>;
    interrupt-parent = <&intc>;
    interrupts = <88>;
    ti,hwmods = "eqep1";
    status = "disabled";
   };
  };

  epwmss2: epwmss@48304000 {
   compatible = "ti,am33xx-pwmss";
   reg = <0x48304000 0x10>;
   ti,hwmods = "epwmss2";
   #address-cells = <1>;
   #size-cells = <1>;
   status = "disabled";
   ranges = <0x48304100 0x48304100 0x80
      0x48304180 0x48304180 0x80
      0x48304200 0x48304200 0x80>;

   ecap2: ecap@48304100 {
    compatible = "ti,am33xx-ecap";
    #pwm-cells = <3>;
    reg = <0x48304100 0x80>;
    interrupts = <61>;
    interrupt-names = "ecap2";
    ti,hwmods = "ecap2";
    status = "disabled";
   };

   ehrpwm2: ehrpwm@48304200 {
    compatible = "ti,am33xx-ehrpwm";
    #pwm-cells = <3>;
    reg = <0x48304200 0x80>;
    ti,hwmods = "ehrpwm2";
    status = "disabled";
   };

   eqep2: eqep@0x48304180 {
    compatible = "ti,am33xx-eqep";
    reg = <0x48304180 0x80>;
    interrupt-parent = <&intc>;
    interrupts = <89>;
    ti,hwmods = "eqep2";
    status = "disabled";
   };
  };

  mac: ethernet@4a100000 {
   compatible = "ti,am335x-cpsw","ti,cpsw";
   ti,hwmods = "cpgmac0";
   clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
   clock-names = "fck", "cpts";
   cpdma_channels = <8>;
   ale_entries = <1024>;
   bd_ram_size = <0x2000>;
   no_bd_ram = <0>;
   rx_descs = <64>;
   mac_control = <0x20>;
   slaves = <2>;
   active_slave = <0>;
   cpts_clock_mult = <0x80000000>;
   cpts_clock_shift = <29>;
   reg = <0x4a100000 0x800
          0x4a101200 0x100>;
   #address-cells = <1>;
   #size-cells = <1>;
   interrupt-parent = <&intc>;






   interrupts = <40 41 42 43>;
   ranges;
   syscon = <&scm_conf>;
   status = "disabled";

   davinci_mdio: mdio@4a101000 {
    compatible = "ti,davinci_mdio";
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "davinci_mdio";
    bus_freq = <1000000>;
    reg = <0x4a101000 0x100>;
    status = "disabled";
   };

   cpsw_emac0: slave@4a100200 {

    mac-address = [ 00 00 00 00 00 00 ];
   };

   cpsw_emac1: slave@4a100300 {

    mac-address = [ 00 00 00 00 00 00 ];
   };

   phy_sel: cpsw-phy-sel@44e10650 {
    compatible = "ti,am3352-cpsw-phy-sel";
    reg= <0x44e10650 0x4>;
    reg-names = "gmii-sel";
   };
  };

  ocmcram: ocmcram@40300000 {
   compatible = "mmio-sram";
   reg = <0x40300000 0x10000>;
   map-exec;
  };

  pruss: pruss@4a300000 {
   compatible = "ti,am3352-pruss";
   ti,hwmods = "pruss";
   reg = <0x4a300000 0x2000>,
         <0x4a302000 0x2000>,
         <0x4a310000 0x3000>,
         <0x4a320000 0x2000>,
         <0x4a326000 0x2000>;
   reg-names = "dram0", "dram1", "shrdram2", "intc", "cfg";
   interrupts = <20 21 22 23 24 25 26 27>;
   #address-cells = <1>;
   #size-cells = <1>;
   ranges;

   pru0: pru@4a334000 {
    compatible = "ti,am3352-pru-rproc";
    reg = <0x4a334000 0x2000>,
          <0x4a322000 0x400>,
          <0x4a322400 0x100>;
    reg-names = "iram", "control", "debug";
    mboxes = <&mailbox &mbox_pru0>;
   };

   pru1: pru@4a338000 {
    compatible = "ti,am3352-pru-rproc";
    reg = <0x4a338000 0x2000>,
          <0x4a324000 0x400>,
          <0x4a324400 0x100>;
    reg-names = "iram", "control", "debug";
    mboxes = <&mailbox &mbox_pru1>;
   };
  };

  elm: elm@48080000 {
   compatible = "ti,am3352-elm";
   reg = <0x48080000 0x2000>;
   interrupts = <4>;
   ti,hwmods = "elm";
   status = "disabled";
  };

  lcdc: lcdc@4830e000 {
   compatible = "ti,am33xx-tilcdc";
   reg = <0x4830e000 0x1000>;
   interrupt-parent = <&intc>;
   interrupts = <36>;
   ti,hwmods = "lcdc";
   status = "disabled";
  };

  tscadc: tscadc@44e0d000 {
   compatible = "ti,am3359-tscadc";
   reg = <0x44e0d000 0x1000>;
   interrupt-parent = <&intc>;
   interrupts = <16>;
   ti,hwmods = "adc_tsc";
   status = "disabled";

   tsc {
    compatible = "ti,am3359-tsc";
   };
   am335x_adc: adc {
    #io-channel-cells = <1>;
    compatible = "ti,am3359-adc";
   };
  };

  gpmc: gpmc@50000000 {
   compatible = "ti,am3352-gpmc";
   ti,hwmods = "gpmc";
   ti,no-idle-on-init;
   reg = <0x50000000 0x2000>;
   interrupts = <100>;
   dmas = <&edma 52 0>;
   dma-names = "rxtx";
   gpmc,num-cs = <7>;
   gpmc,num-waitpins = <2>;
   #address-cells = <2>;
   #size-cells = <1>;
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   status = "disabled";
  };

  sham: sham@53100000 {
   compatible = "ti,omap4-sham";
   ti,hwmods = "sham";
   reg = <0x53100000 0x200>;
   interrupts = <109>;
   dmas = <&edma 36 0>;
   dma-names = "rx";
  };

  aes: aes@53500000 {
   compatible = "ti,omap4-aes";
   ti,hwmods = "aes";
   reg = <0x53500000 0xa0>;
   interrupts = <103>;
   dmas = <&edma 6 0>,
          <&edma 5 0>;
   dma-names = "tx", "rx";
  };

  mcasp0: mcasp@48038000 {
   compatible = "ti,am33xx-mcasp-audio";
   ti,hwmods = "mcasp0";
   reg = <0x48038000 0x2000>,
         <0x46000000 0x400000>;
   reg-names = "mpu", "dat";
   interrupts = <80>, <81>;
   interrupt-names = "tx", "rx";
   status = "disabled";
   dmas = <&edma 8 2>,
    <&edma 9 2>;
   dma-names = "tx", "rx";
  };

  mcasp1: mcasp@4803C000 {
   compatible = "ti,am33xx-mcasp-audio";
   ti,hwmods = "mcasp1";
   reg = <0x4803C000 0x2000>,
         <0x46400000 0x400000>;
   reg-names = "mpu", "dat";
   interrupts = <82>, <83>;
   interrupt-names = "tx", "rx";
   status = "disabled";
   dmas = <&edma 10 2>,
    <&edma 11 2>;
   dma-names = "tx", "rx";
  };

  rng: rng@48310000 {
   compatible = "ti,omap4-rng";
   ti,hwmods = "rng";
   reg = <0x48310000 0x2000>;
   interrupts = <111>;
  };







  sgx: sgx@0x56000000 {
   compatible = "ti,am3352-sgx530", "img,sgx530";
   ti,hwmods = "gfx";
   reg = <0x56000000 0x1000000>;
   interrupts = <37>;
   status = "disabled";
  };
 };
};

/include/ "am33xx-clocks.dtsi"
# 11 "arch/arm/boot/dts/am335x-boneblack-spi0.dts" 2
# 1 "arch/arm/boot/dts/am335x-bone-common.dtsi" 1
# 9 "arch/arm/boot/dts/am335x-bone-common.dtsi"
/ {
 cpus {
  cpu@0 {
   cpu0-supply = <&dcdc2_reg>;
  };
 };

 memory {
  device_type = "memory";
  reg = <0x80000000 0x10000000>;
 };

 leds {
  pinctrl-names = "default";
  pinctrl-0 = <&user_leds_s0>;

  compatible = "gpio-leds";

  led@2 {
   label = "beaglebone:green:usr0";
   gpios = <&gpio1 21 0>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };

  led@3 {
   label = "beaglebone:green:usr1";
   gpios = <&gpio1 22 0>;
   linux,default-trigger = "mmc0";
   default-state = "off";
  };

  led@4 {
   label = "beaglebone:green:usr2";
   gpios = <&gpio1 23 0>;
   linux,default-trigger = "cpu0";
   default-state = "off";
  };

  led@5 {
   label = "beaglebone:green:usr3";
   gpios = <&gpio1 24 0>;
   linux,default-trigger = "mmc1";
   default-state = "off";
  };
 };

 vmmcsd_fixed: fixedregulator@0 {
  compatible = "regulator-fixed";
  regulator-name = "vmmcsd_fixed";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
 };
};

&am33xx_pinmux {
 pinctrl-names = "default";
 pinctrl-0 = <&clkout2_pin>;

 user_leds_s0: user_leds_s0 {
  pinctrl-single,pins = <
   0x54 (0 | 7)
   0x58 (((1 << 4)) | 7)
   0x5c (0 | 7)
   0x60 (((1 << 4)) | 7)
  >;
 };

 i2c0_pins: pinmux_i2c0_pins {
  pinctrl-single,pins = <
   0x188 (((1 << 5) | (1 << 4)) | 0)
   0x18c (((1 << 5) | (1 << 4)) | 0)
  >;
 };

 i2c2_pins: pinmux_i2c2_pins {
  pinctrl-single,pins = <
   0x178 (((1 << 5) | (1 << 4)) | 3)
   0x17c (((1 << 5) | (1 << 4)) | 3)
  >;
 };

 uart0_pins: pinmux_uart0_pins {
  pinctrl-single,pins = <
   0x170 (((1 << 5) | (1 << 4)) | 0)
   0x174 (0 | 0)
  >;
 };

 clkout2_pin: pinmux_clkout2_pin {
  pinctrl-single,pins = <
   0x1b4 (0 | 3)
  >;
 };

 cpsw_default: cpsw_default {
  pinctrl-single,pins = <

   0x108 (((1 << 5) | (1 << 3)) | 0)
   0x10c (((1 << 5) | (1 << 3)) | 0)
   0x110 (((1 << 5) | (1 << 4)) | 0)
   0x114 (0 | 0)
   0x118 (((1 << 5) | (1 << 4)) | 0)
   0x11c (0 | 0)
   0x120 (0 | 0)
   0x124 (0 | 0)
   0x128 (0 | 0)
   0x12c (((1 << 5) | (1 << 4)) | 0)
   0x130 (((1 << 5) | (1 << 4)) | 0)
   0x134 (((1 << 5) | (1 << 4)) | 0)
   0x138 (((1 << 5) | (1 << 4)) | 0)
   0x13c (((1 << 5) | (1 << 4)) | 0)
   0x140 (((1 << 5) | (1 << 4)) | 0)
  >;
 };

 cpsw_sleep: cpsw_sleep {
  pinctrl-single,pins = <

   0x108 (((1 << 5)) | 7)
   0x10c (((1 << 5)) | 7)
   0x110 (((1 << 5)) | 7)
   0x114 (((1 << 5)) | 7)
   0x118 (((1 << 5)) | 7)
   0x11c (((1 << 5)) | 7)
   0x120 (((1 << 5)) | 7)
   0x124 (((1 << 5)) | 7)
   0x128 (((1 << 5)) | 7)
   0x12c (((1 << 5)) | 7)
   0x130 (((1 << 5)) | 7)
   0x134 (((1 << 5)) | 7)
   0x138 (((1 << 5)) | 7)
   0x13c (((1 << 5)) | 7)
   0x140 (((1 << 5)) | 7)
  >;
 };

 davinci_mdio_default: davinci_mdio_default {
  pinctrl-single,pins = <

   0x148 (((1 << 5) | (1 << 4)) | 0 | 0)
   0x14c (((1 << 4)) | 0)
  >;
 };

 davinci_mdio_sleep: davinci_mdio_sleep {
  pinctrl-single,pins = <

   0x148 (((1 << 5)) | 7)
   0x14c (((1 << 5)) | 7)
  >;
 };

 mmc1_pins_default: pinmux_mmc1_pins {
  pinctrl-single,pins = <
   0x0F0 (((1 << 5) | (1 << 4)) | 0)
   0x0F4 (((1 << 5) | (1 << 4)) | 0)
   0x0F8 (((1 << 5) | (1 << 4)) | 0)
   0x0FC (((1 << 5) | (1 << 4)) | 0)
   0x100 (((1 << 5) | (1 << 4)) | 0)
   0x104 (((1 << 5) | (1 << 4)) | 0)
   0x160 (((1 << 5) | (1 << 3)) | 7)
  >;
 };

 mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
  pinctrl-single,pins = <
   0x0F0 (((1 << 5)) | 7)
   0x0F4 (((1 << 5)) | 7)
   0x0F8 (((1 << 5)) | 7)
   0x0FC (((1 << 5)) | 7)
   0x100 (((1 << 5)) | 7)
   0x104 (((1 << 5)) | 7)
   0x160 (((1 << 5)) | 7)
  >;
 };

 emmc_pins: pinmux_emmc_pins {
  pinctrl-single,pins = <
   0x80 (((1 << 5) | (1 << 4)) | 2)
   0x84 (((1 << 5) | (1 << 4)) | 2)
   0x00 (((1 << 5) | (1 << 4)) | 1)
   0x04 (((1 << 5) | (1 << 4)) | 1)
   0x08 (((1 << 5) | (1 << 4)) | 1)
   0x0c (((1 << 5) | (1 << 4)) | 1)
   0x10 (((1 << 5) | (1 << 4)) | 1)
   0x14 (((1 << 5) | (1 << 4)) | 1)
   0x18 (((1 << 5) | (1 << 4)) | 1)
   0x1c (((1 << 5) | (1 << 4)) | 1)
  >;
 };
};

&uart0 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart0_pins>;

 status = "okay";
};

&usb {
 status = "okay";
};

&usb_ctrl_mod {
 status = "okay";
};

&usb0_phy {
 status = "okay";
};

&usb1_phy {
 status = "okay";
};

&usb0 {
 status = "okay";
 dr_mode = "peripheral";
};

&usb1 {
 status = "okay";
 dr_mode = "host";
};

&cppi41dma {
 status = "okay";
};

&i2c0 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c0_pins>;

 status = "okay";
 clock-frequency = <400000>;

 tps: tps@24 {
  reg = <0x24>;
 };

 baseboard_eeprom: baseboard_eeprom@50 {
  compatible = "at,24c256";
  reg = <0x50>;

  #address-cells = <1>;
  #size-cells = <1>;
  baseboard_data: baseboard_data@0 {
   reg = <0 0x100>;
  };
 };
};

&i2c2 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c2_pins>;

 status = "okay";
 clock-frequency = <100000>;

 cape_eeprom0: cape_eeprom0@54 {
  compatible = "at,24c256";
  reg = <0x54>;
  #address-cells = <1>;
  #size-cells = <1>;
  cape0_data: cape_data@0 {
   reg = <0 0x100>;
  };
 };

 cape_eeprom1: cape_eeprom1@55 {
  compatible = "at,24c256";
  reg = <0x55>;
  #address-cells = <1>;
  #size-cells = <1>;
  cape1_data: cape_data@0 {
   reg = <0 0x100>;
  };
 };

 cape_eeprom2: cape_eeprom2@56 {
  compatible = "at,24c256";
  reg = <0x56>;
  #address-cells = <1>;
  #size-cells = <1>;
  cape2_data: cape_data@0 {
   reg = <0 0x100>;
  };
 };

 cape_eeprom3: cape_eeprom3@57 {
  compatible = "at,24c256";
  reg = <0x57>;
  #address-cells = <1>;
  #size-cells = <1>;
  cape3_data: cape_data@0 {
   reg = <0 0x100>;
  };
 };
};


/include/ "tps65217.dtsi"

&tps {
# 331 "arch/arm/boot/dts/am335x-bone-common.dtsi"
 ti,pmic-shutdown-controller;

 interrupt-parent = <&intc>;
 interrupts = <7>;

 regulators {
  dcdc1_reg: regulator@0 {
   regulator-name = "vdds_dpr";
   regulator-always-on;
  };

  dcdc2_reg: regulator@1 {

   regulator-name = "vdd_mpu";
   regulator-min-microvolt = <925000>;
   regulator-max-microvolt = <1378000>;
   regulator-boot-on;
   regulator-always-on;
  };

  dcdc3_reg: regulator@2 {

   regulator-name = "vdd_core";
   regulator-min-microvolt = <925000>;
   regulator-max-microvolt = <1150000>;
   regulator-boot-on;
   regulator-always-on;
  };

  ldo1_reg: regulator@3 {
   regulator-name = "vio,vrtc,vdds";
   regulator-always-on;
  };

  ldo2_reg: regulator@4 {
   regulator-name = "vdd_3v3aux";
   regulator-always-on;
  };

  ldo3_reg: regulator@5 {
   regulator-name = "vdd_1v8";
   regulator-always-on;
  };

  ldo4_reg: regulator@6 {
   regulator-name = "vdd_3v3a";
   regulator-always-on;
  };
 };
};

&cpsw_emac0 {
 phy_id = <&davinci_mdio>, <0>;
 phy-mode = "mii";
};

&mac {
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&cpsw_default>;
 pinctrl-1 = <&cpsw_sleep>;
 slaves = <1>;
 status = "okay";
};

&davinci_mdio {
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&davinci_mdio_default>;
 pinctrl-1 = <&davinci_mdio_sleep>;
 status = "okay";
};

&mmc1 {
 status = "okay";
 bus-width = <0x4>;
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&mmc1_pins_default>;
 pinctrl-1 = <&mmc1_pins_sleep>;
 cd-gpios = <&gpio0 6 0>;
 cd-inverted;
};

&aes {
 status = "okay";
};

&sham {
 status = "okay";
};

&wkup_m3_ipc {
 ti,scale-data-fw = "am335x-bone-scale-data.bin";
};

&rtc {
 system-power-controller;
};


/ {
 bone_capemgr {
  compatible = "ti,bone-capemgr";
  status = "okay";

  nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>;
  nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3";
  #slots = <4>;


  baseboardmaps {
   baseboard_beaglebone: board@0 {
    board-name = "A335BONE";
    compatible-name = "ti,beaglebone";
   };

   baseboard_beaglebone_black: board@1 {
    board-name = "A335BNLT";
    compatible-name = "ti,beaglebone-black";
   };
  };
 };
};
# 12 "arch/arm/boot/dts/am335x-boneblack-spi0.dts" 2
# 1 "arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi" 1
# 11 "arch/arm/boot/dts/am33xx-overlay-edma-fix.dtsi"
&uart0 {
 status = "okay";
};

&uart1 {
 status = "okay";
};

&uart2 {
 status = "okay";
};

&spi0 {
 status = "okay";
};

&spi1 {
 status = "okay";
};

&mcasp0 {
 status = "okay";
};

&mcasp1 {
 status = "okay";
};
# 13 "arch/arm/boot/dts/am335x-boneblack-spi0.dts" 2

/ {
 model = "TI AM335x BeagleBone Black";
 compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};

&ldo3_reg {
 regulator-min-microvolt = <1800000>;
 regulator-max-microvolt = <1800000>;
 regulator-always-on;
};

&mmc1 {
 vmmc-supply = <&vmmcsd_fixed>;
};

&mmc2 {
 vmmc-supply = <&vmmcsd_fixed>;
 pinctrl-names = "default";
 pinctrl-0 = <&emmc_pins>;
 bus-width = <8>;
 status = "okay";
};

&sgx {
 status = "okay";
};

&am33xx_pinmux {
 nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
  pinctrl-single,pins = <
   0x1b0 0x03
   0xa0 0x08
   0xa4 0x08
   0xa8 0x08
   0xac 0x08
   0xb0 0x08
   0xb4 0x08
   0xb8 0x08
   0xbc 0x08
   0xc0 0x08
   0xc4 0x08
   0xc8 0x08
   0xcc 0x08
   0xd0 0x08
   0xd4 0x08
   0xd8 0x08
   0xdc 0x08
   0xe0 0x00
   0xe4 0x00
   0xe8 0x00
   0xec 0x00
  >;
 };
 nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
  pinctrl-single,pins = <
   0x1b0 0x03
  >;
 };

 mcasp0_pins: mcasp0_pins {
  pinctrl-single,pins = <
   0x1ac (((1 << 5) | (1 << 4)) | 0)
   0x19c (0 | 2)
   0x194 (((1 << 4)) | 0)
   0x190 (0 | 0)
   0x06c (0 | 7)
  >;
 };

 mcasp0_pins_sleep: mcasp0_pins_sleep {
  pinctrl-single,pins = <
   0x1ac (((1 << 5)) | 7)
   0x19c (((1 << 5)) | 7)
   0x194 (((1 << 5)) | 7)
   0x190 (((1 << 5)) | 7)
   0x06c (((1 << 5)) | 7)
  >;
 };

 bb_spi0_pins: pinmux_bb_spi0_pins {
  pinctrl-single,pins = <
   0x150 0x30
   0x154 0x30
   0x158 0x10
   0x15c 0x10
  >;
 };
};

&lcdc {
 status = "okay";
 port {
  lcdc_0: endpoint@0 {
   remote-endpoint = <&hdmi_0>;
  };
 };
};

&i2c0 {
 tda19988 {
  compatible = "nxp,tda998x";
  reg = <0x70>;
  pinctrl-names = "default", "off";
  pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
  pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
  port {
   hdmi_0: endpoint@0 {
    remote-endpoint = <&lcdc_0>;
   };
  };
 };
};

&mcasp0 {
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&mcasp0_pins>;
 pinctrl-1 = <&mcasp0_pins_sleep>;
 status = "okay";
 op-mode = <0>;
 tdm-slots = <2>;
 serial-dir = <
   0 0 1 0
  >;
 tx-num-evt = <1>;
 rx-num-evt = <1>;
};

&spi0 {
 pinctrl-names = "default";
 pinctrl-0 = <&bb_spi0_pins>;
 status = "okay";

 channel@0 {
  compatible = "spidev";
  spi-max-frequency = <16000000>;
  reg = <0>;
  spi-cpha;
 };

 channel@1 {
  compatible = "spidev";
  spi-max-frequency = <16000000>;
  reg = <1>;
 };
};

/ {
 clk_mcasp0_fixed: clk_mcasp0_fixed {
       #clock-cells = <0>;
       compatible = "fixed-clock";
       clock-frequency = <24576000>;
 };

 clk_mcasp0: clk_mcasp0 {
       #clock-cells = <0>;
       compatible = "gpio-gate-clock";
       clocks = <&clk_mcasp0_fixed>;
       enable-gpios = <&gpio1 27 0>;
 };

 hdmi_audio: hdmi_audio@0 {
        compatible = "linux,hdmi-audio";
        status = "okay";
 };

 sound {
  compatible = "ti,beaglebone-black-audio";
  ti,model = "TI BeagleBone Black";
  ti,audio-codec = <&hdmi_audio>;
  ti,mcasp-controller = <&mcasp0>;
  ti,audio-routing =
   "HDMI Out", "TX";
  clocks = <&clk_mcasp0>;
  clock-names = "mclk";
 };
};