# 1 "arch/arm/boot/dts/omap5-cm-t54.dts"
# 1 "<built-in>"
# 1 "<command-line>"
# 1 "arch/arm/boot/dts/omap5-cm-t54.dts"



/dts-v1/;

# 1 "arch/arm/boot/dts/omap5.dtsi" 1
# 10 "arch/arm/boot/dts/omap5.dtsi"
# 1 "./arch/arm/boot/dts/include/dt-bindings/gpio/gpio.h" 1
# 11 "arch/arm/boot/dts/omap5.dtsi" 2
# 1 "./arch/arm/boot/dts/include/dt-bindings/interrupt-controller/arm-gic.h" 1







# 1 "./arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h" 1
# 9 "./arch/arm/boot/dts/include/dt-bindings/interrupt-controller/arm-gic.h" 2
# 12 "arch/arm/boot/dts/omap5.dtsi" 2
# 1 "./arch/arm/boot/dts/include/dt-bindings/pinctrl/omap.h" 1
# 13 "arch/arm/boot/dts/omap5.dtsi" 2

# 1 "arch/arm/boot/dts/skeleton.dtsi" 1






/ {
 #address-cells = <1>;
 #size-cells = <1>;
 chosen { };
 aliases { };
 memory { device_type = "memory"; reg = <0 0>; };
};
# 15 "arch/arm/boot/dts/omap5.dtsi" 2

/ {
 #address-cells = <1>;
 #size-cells = <1>;

 compatible = "ti,omap5";
 interrupt-parent = <&wakeupgen>;

 aliases {
  i2c0 = &i2c1;
  i2c1 = &i2c2;
  i2c2 = &i2c3;
  i2c3 = &i2c4;
  i2c4 = &i2c5;
  serial0 = &uart1;
  serial1 = &uart2;
  serial2 = &uart3;
  serial3 = &uart4;
  serial4 = &uart5;
  serial5 = &uart6;
  rproc0 = &dsp;
  rproc1 = &ipu;
 };

 cpus {
  #address-cells = <1>;
  #size-cells = <0>;

  cpu0: cpu@0 {
   device_type = "cpu";
   compatible = "arm,cortex-a15";
   reg = <0x0>;

   operating-points = <

    1000000 1060000
    1500000 1250000
   >;

   clocks = <&dpll_mpu_ck>;
   clock-names = "cpu";

   clock-latency = <300000>;


   cooling-min-level = <0>;
   cooling-max-level = <2>;
   #cooling-cells = <2>;
  };
  cpu@1 {
   device_type = "cpu";
   compatible = "arm,cortex-a15";
   reg = <0x1>;
  };
 };

 thermal-zones {
# 1 "arch/arm/boot/dts/omap4-cpu-thermal.dtsi" 1
# 12 "arch/arm/boot/dts/omap4-cpu-thermal.dtsi"
# 1 "./arch/arm/boot/dts/include/dt-bindings/thermal/thermal.h" 1
# 13 "arch/arm/boot/dts/omap4-cpu-thermal.dtsi" 2

cpu_thermal: cpu_thermal {
 polling-delay-passive = <250>;
 polling-delay = <1000>;


        thermal-sensors = <&bandgap 0>;

 cpu_trips: trips {
                cpu_alert0: cpu_alert {
                        temperature = <100000>;
                        hysteresis = <2000>;
                        type = "passive";
                };
                cpu_crit: cpu_crit {
                        temperature = <125000>;
                        hysteresis = <2000>;
                        type = "critical";
                };
        };

 cpu_cooling_maps: cooling-maps {
  map0 {
   trip = <&cpu_alert0>;
   cooling-device =
    <&cpu0 (~0) (~0)>;
  };
 };
};
# 73 "arch/arm/boot/dts/omap5.dtsi" 2
# 1 "arch/arm/boot/dts/omap5-gpu-thermal.dtsi" 1
# 14 "arch/arm/boot/dts/omap5-gpu-thermal.dtsi"
gpu_thermal: gpu_thermal {
 polling-delay-passive = <250>;
 polling-delay = <500>;


 thermal-sensors = <&bandgap 1>;

 trips {
  gpu_crit: gpu_crit {
   temperature = <125000>;
   hysteresis = <2000>;
   type = "critical";
  };
 };
};
# 74 "arch/arm/boot/dts/omap5.dtsi" 2
# 1 "arch/arm/boot/dts/omap5-core-thermal.dtsi" 1
# 14 "arch/arm/boot/dts/omap5-core-thermal.dtsi"
core_thermal: core_thermal {
 polling-delay-passive = <250>;
 polling-delay = <500>;


 thermal-sensors = <&bandgap 2>;

 trips {
  core_crit: core_crit {
   temperature = <125000>;
   hysteresis = <2000>;
   type = "critical";
  };
 };
};
# 75 "arch/arm/boot/dts/omap5.dtsi" 2
 };

 timer {
  compatible = "arm,armv7-timer";

  interrupts = <1 13 (((3) << 8) | 8)>,
        <1 14 (((3) << 8) | 8)>,
        <1 11 (((3) << 8) | 8)>,
        <1 10 (((3) << 8) | 8)>;
  interrupt-parent = <&gic>;
 };

 pmu {
  compatible = "arm,cortex-a15-pmu";
  interrupts = <0 131 4>,
        <0 132 4>;
 };

 gic: interrupt-controller@48211000 {
  compatible = "arm,cortex-a15-gic";
  interrupt-controller;
  #interrupt-cells = <3>;
  reg = <0x48211000 0x1000>,
        <0x48212000 0x1000>,
        <0x48214000 0x2000>,
        <0x48216000 0x2000>;
  interrupt-parent = <&gic>;
 };

 wakeupgen: interrupt-controller@48281000 {
  compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
  interrupt-controller;
  #interrupt-cells = <3>;
  reg = <0x48281000 0x1000>;
  interrupt-parent = <&gic>;
 };





 soc {
  compatible = "ti,omap-infra";
  mpu {
   compatible = "ti,omap4-mpu";
   ti,hwmods = "mpu";
   sram = <&ocmcram>;
  };
 };
# 132 "arch/arm/boot/dts/omap5.dtsi"
 ocp {
  compatible = "ti,omap5-l3-noc", "simple-bus";
  #address-cells = <1>;
  #size-cells = <1>;
  ranges;
  ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
  reg = <0x44000000 0x2000>,
        <0x44800000 0x3000>,
        <0x45000000 0x4000>;
  interrupts = <0 9 4>,
        <0 10 4>;

  l4_cfg: l4@4a000000 {
   compatible = "ti,omap5-l4-cfg", "simple-bus";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0x4a000000 0x22a000>;

   scm_core: scm@2000 {
    compatible = "ti,omap5-scm-core", "simple-bus";
    reg = <0x2000 0x1000>;
    #address-cells = <1>;
    #size-cells = <1>;
    ranges = <0 0x2000 0x800>;

    scm_conf: scm_conf@0 {
     compatible = "syscon";
     reg = <0x0 0x800>;
     #address-cells = <1>;
     #size-cells = <1>;
    };
   };

   scm_padconf_core: scm@2800 {
    compatible = "ti,omap5-scm-padconf-core",
          "simple-bus";
    #address-cells = <1>;
    #size-cells = <1>;
    ranges = <0 0x2800 0x800>;

    omap5_pmx_core: pinmux@40 {
     compatible = "ti,omap5-padconf",
           "pinctrl-single";
     reg = <0x40 0x01b6>;
     #address-cells = <1>;
     #size-cells = <0>;
     #interrupt-cells = <1>;
     interrupt-controller;
     pinctrl-single,register-width = <16>;
     pinctrl-single,function-mask = <0x7fff>;
    };

    omap5_padconf_global: omap5_padconf_global@5a0 {
     compatible = "syscon",
           "simple-bus";
     reg = <0x5a0 0xec>;
     #address-cells = <1>;
     #size-cells = <1>;

     pbias_regulator: pbias_regulator {
      compatible = "ti,pbias-omap";
      reg = <0x60 0x4>;
      syscon = <&omap5_padconf_global>;
      pbias_mmc_reg: pbias_mmc_omap5 {
       regulator-name = "pbias_mmc_omap5";
       regulator-min-microvolt = <1800000>;
       regulator-max-microvolt = <3000000>;
      };
     };
    };
   };

   cm_core_aon: cm_core_aon@4000 {
    compatible = "ti,omap5-cm-core-aon";
    reg = <0x4000 0x2000>;

    cm_core_aon_clocks: clocks {
     #address-cells = <1>;
     #size-cells = <0>;
    };

    cm_core_aon_clockdomains: clockdomains {
    };
   };

   cm_core: cm_core@8000 {
    compatible = "ti,omap5-cm-core";
    reg = <0x8000 0x3000>;

    cm_core_clocks: clocks {
     #address-cells = <1>;
     #size-cells = <0>;
    };

    cm_core_clockdomains: clockdomains {
    };
   };
  };

  l4_wkup: l4@4ae00000 {
   compatible = "ti,omap5-l4-wkup", "simple-bus";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0x4ae00000 0x2b000>;

   counter32k: counter@4000 {
    compatible = "ti,omap-counter32k";
    reg = <0x4000 0x40>;
    ti,hwmods = "counter_32k";
   };

   prm: prm@6000 {
    compatible = "ti,omap5-prm";
    reg = <0x6000 0x3000>;
    interrupts = <0 11 4>;

    prm_clocks: clocks {
     #address-cells = <1>;
     #size-cells = <0>;
    };

    prm_clockdomains: clockdomains {
    };
   };

   scrm: scrm@a000 {
    compatible = "ti,omap5-scrm";
    reg = <0xa000 0x2000>;

    scrm_clocks: clocks {
     #address-cells = <1>;
     #size-cells = <0>;
    };

    scrm_clockdomains: clockdomains {
    };
   };

   omap5_pmx_wkup: pinmux@c840 {
    compatible = "ti,omap5-padconf",
          "pinctrl-single";
    reg = <0xc840 0x0038>;
    #address-cells = <1>;
    #size-cells = <0>;
    #interrupt-cells = <1>;
    interrupt-controller;
    pinctrl-single,register-width = <16>;
    pinctrl-single,function-mask = <0x7fff>;
   };
  };

  ocmcram: ocmcram@40300000 {
   compatible = "mmio-sram";
   reg = <0x40300000 0x20000>;
  };

  sdma: dma-controller@4a056000 {
   compatible = "ti,omap4430-sdma";
   reg = <0x4a056000 0x1000>;
   interrupts = <0 12 4>,
         <0 13 4>,
         <0 14 4>,
         <0 15 4>;
   #dma-cells = <1>;
   dma-channels = <32>;
   dma-requests = <127>;
  };

  gpio1: gpio@4ae10000 {
   compatible = "ti,omap4-gpio";
   reg = <0x4ae10000 0x200>;
   interrupts = <0 29 4>;
   ti,hwmods = "gpio1";
   ti,gpio-always-on;
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio2: gpio@48055000 {
   compatible = "ti,omap4-gpio";
   reg = <0x48055000 0x200>;
   interrupts = <0 30 4>;
   ti,hwmods = "gpio2";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio3: gpio@48057000 {
   compatible = "ti,omap4-gpio";
   reg = <0x48057000 0x200>;
   interrupts = <0 31 4>;
   ti,hwmods = "gpio3";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio4: gpio@48059000 {
   compatible = "ti,omap4-gpio";
   reg = <0x48059000 0x200>;
   interrupts = <0 32 4>;
   ti,hwmods = "gpio4";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio5: gpio@4805b000 {
   compatible = "ti,omap4-gpio";
   reg = <0x4805b000 0x200>;
   interrupts = <0 33 4>;
   ti,hwmods = "gpio5";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio6: gpio@4805d000 {
   compatible = "ti,omap4-gpio";
   reg = <0x4805d000 0x200>;
   interrupts = <0 34 4>;
   ti,hwmods = "gpio6";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio7: gpio@48051000 {
   compatible = "ti,omap4-gpio";
   reg = <0x48051000 0x200>;
   interrupts = <0 35 4>;
   ti,hwmods = "gpio7";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpio8: gpio@48053000 {
   compatible = "ti,omap4-gpio";
   reg = <0x48053000 0x200>;
   interrupts = <0 121 4>;
   ti,hwmods = "gpio8";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  gpmc: gpmc@50000000 {
   compatible = "ti,omap4430-gpmc";
   reg = <0x50000000 0x1000>;
   #address-cells = <2>;
   #size-cells = <1>;
   interrupts = <0 20 4>;
   dmas = <&sdma 4>;
   dma-names = "rxtx";
   gpmc,num-cs = <8>;
   gpmc,num-waitpins = <4>;
   ti,hwmods = "gpmc";
   clocks = <&l3_iclk_div>;
   clock-names = "fck";
  };

  i2c1: i2c@48070000 {
   compatible = "ti,omap4-i2c";
   reg = <0x48070000 0x100>;
   interrupts = <0 56 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c1";
  };

  i2c2: i2c@48072000 {
   compatible = "ti,omap4-i2c";
   reg = <0x48072000 0x100>;
   interrupts = <0 57 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c2";
  };

  i2c3: i2c@48060000 {
   compatible = "ti,omap4-i2c";
   reg = <0x48060000 0x100>;
   interrupts = <0 61 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c3";
  };

  i2c4: i2c@4807a000 {
   compatible = "ti,omap4-i2c";
   reg = <0x4807a000 0x100>;
   interrupts = <0 62 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c4";
  };

  i2c5: i2c@4807c000 {
   compatible = "ti,omap4-i2c";
   reg = <0x4807c000 0x100>;
   interrupts = <0 60 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c5";
  };

  hwspinlock: spinlock@4a0f6000 {
   compatible = "ti,omap4-hwspinlock";
   reg = <0x4a0f6000 0x1000>;
   ti,hwmods = "spinlock";
   #hwlock-cells = <1>;
  };

  mcspi1: spi@48098000 {
   compatible = "ti,omap4-mcspi";
   reg = <0x48098000 0x200>;
   interrupts = <0 65 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "mcspi1";
   ti,spi-num-cs = <4>;
   dmas = <&sdma 35>,
          <&sdma 36>,
          <&sdma 37>,
          <&sdma 38>,
          <&sdma 39>,
          <&sdma 40>,
          <&sdma 41>,
          <&sdma 42>;
   dma-names = "tx0", "rx0", "tx1", "rx1",
        "tx2", "rx2", "tx3", "rx3";
  };

  mcspi2: spi@4809a000 {
   compatible = "ti,omap4-mcspi";
   reg = <0x4809a000 0x200>;
   interrupts = <0 66 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "mcspi2";
   ti,spi-num-cs = <2>;
   dmas = <&sdma 43>,
          <&sdma 44>,
          <&sdma 45>,
          <&sdma 46>;
   dma-names = "tx0", "rx0", "tx1", "rx1";
  };

  mcspi3: spi@480b8000 {
   compatible = "ti,omap4-mcspi";
   reg = <0x480b8000 0x200>;
   interrupts = <0 91 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "mcspi3";
   ti,spi-num-cs = <2>;
   dmas = <&sdma 15>, <&sdma 16>;
   dma-names = "tx0", "rx0";
  };

  mcspi4: spi@480ba000 {
   compatible = "ti,omap4-mcspi";
   reg = <0x480ba000 0x200>;
   interrupts = <0 48 4>;
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "mcspi4";
   ti,spi-num-cs = <1>;
   dmas = <&sdma 70>, <&sdma 71>;
   dma-names = "tx0", "rx0";
  };

  uart1: serial@4806a000 {
   compatible = "ti,omap4-uart";
   reg = <0x4806a000 0x100>;
   interrupts = <0 72 4>;
   ti,hwmods = "uart1";
   clock-frequency = <48000000>;
  };

  uart2: serial@4806c000 {
   compatible = "ti,omap4-uart";
   reg = <0x4806c000 0x100>;
   interrupts = <0 73 4>;
   ti,hwmods = "uart2";
   clock-frequency = <48000000>;
  };

  uart3: serial@48020000 {
   compatible = "ti,omap4-uart";
   reg = <0x48020000 0x100>;
   interrupts = <0 74 4>;
   ti,hwmods = "uart3";
   clock-frequency = <48000000>;
  };

  uart4: serial@4806e000 {
   compatible = "ti,omap4-uart";
   reg = <0x4806e000 0x100>;
   interrupts = <0 70 4>;
   ti,hwmods = "uart4";
   clock-frequency = <48000000>;
  };

  uart5: serial@48066000 {
   compatible = "ti,omap4-uart";
   reg = <0x48066000 0x100>;
   interrupts = <0 105 4>;
   ti,hwmods = "uart5";
   clock-frequency = <48000000>;
  };

  uart6: serial@48068000 {
   compatible = "ti,omap4-uart";
   reg = <0x48068000 0x100>;
   interrupts = <0 106 4>;
   ti,hwmods = "uart6";
   clock-frequency = <48000000>;
  };

  mmc1: mmc@4809c000 {
   compatible = "ti,omap4-hsmmc";
   reg = <0x4809c000 0x400>;
   interrupts = <0 83 4>;
   ti,hwmods = "mmc1";
   ti,dual-volt;
   ti,needs-special-reset;
   dmas = <&sdma 61>, <&sdma 62>;
   dma-names = "tx", "rx";
   pbias-supply = <&pbias_mmc_reg>;
  };

  mmc2: mmc@480b4000 {
   compatible = "ti,omap4-hsmmc";
   reg = <0x480b4000 0x400>;
   interrupts = <0 86 4>;
   ti,hwmods = "mmc2";
   ti,needs-special-reset;
   dmas = <&sdma 47>, <&sdma 48>;
   dma-names = "tx", "rx";
  };

  mmc3: mmc@480ad000 {
   compatible = "ti,omap4-hsmmc";
   reg = <0x480ad000 0x400>;
   interrupts = <0 94 4>;
   ti,hwmods = "mmc3";
   ti,needs-special-reset;
   dmas = <&sdma 77>, <&sdma 78>;
   dma-names = "tx", "rx";
  };

  mmc4: mmc@480d1000 {
   compatible = "ti,omap4-hsmmc";
   reg = <0x480d1000 0x400>;
   interrupts = <0 96 4>;
   ti,hwmods = "mmc4";
   ti,needs-special-reset;
   dmas = <&sdma 57>, <&sdma 58>;
   dma-names = "tx", "rx";
  };

  mmc5: mmc@480d5000 {
   compatible = "ti,omap4-hsmmc";
   reg = <0x480d5000 0x400>;
   interrupts = <0 59 4>;
   ti,hwmods = "mmc5";
   ti,needs-special-reset;
   dmas = <&sdma 59>, <&sdma 60>;
   dma-names = "tx", "rx";
  };

  mmu_dsp: mmu@4a066000 {
   compatible = "ti,omap4-iommu";
   reg = <0x4a066000 0x100>;
   interrupts = <0 28 4>;
   ti,hwmods = "mmu_dsp";
   #iommu-cells = <0>;
  };

  mmu_ipu: mmu@55082000 {
   compatible = "ti,omap4-iommu";
   reg = <0x55082000 0x100>;
   interrupts = <0 100 4>;
   ti,hwmods = "mmu_ipu";
   #iommu-cells = <0>;
   ti,iommu-bus-err-back;
  };

  keypad: keypad@4ae1c000 {
   compatible = "ti,omap4-keypad";
   reg = <0x4ae1c000 0x400>;
   ti,hwmods = "kbd";
  };

  mcpdm: mcpdm@40132000 {
   compatible = "ti,omap4-mcpdm";
   reg = <0x40132000 0x7f>,
         <0x49032000 0x7f>;
   reg-names = "mpu", "dma";
   interrupts = <0 112 4>;
   ti,hwmods = "mcpdm";
   dmas = <&sdma 65>,
          <&sdma 66>;
   dma-names = "up_link", "dn_link";
   status = "disabled";
  };

  dmic: dmic@4012e000 {
   compatible = "ti,omap4-dmic";
   reg = <0x4012e000 0x7f>,
         <0x4902e000 0x7f>;
   reg-names = "mpu", "dma";
   interrupts = <0 114 4>;
   ti,hwmods = "dmic";
   dmas = <&sdma 67>;
   dma-names = "up_link";
   status = "disabled";
  };

  mcbsp1: mcbsp@40122000 {
   compatible = "ti,omap4-mcbsp";
   reg = <0x40122000 0xff>,
         <0x49022000 0xff>;
   reg-names = "mpu", "dma";
   interrupts = <0 17 4>;
   interrupt-names = "common";
   ti,buffer-size = <128>;
   ti,hwmods = "mcbsp1";
   dmas = <&sdma 33>,
          <&sdma 34>;
   dma-names = "tx", "rx";
   status = "disabled";
  };

  mcbsp2: mcbsp@40124000 {
   compatible = "ti,omap4-mcbsp";
   reg = <0x40124000 0xff>,
         <0x49024000 0xff>;
   reg-names = "mpu", "dma";
   interrupts = <0 22 4>;
   interrupt-names = "common";
   ti,buffer-size = <128>;
   ti,hwmods = "mcbsp2";
   dmas = <&sdma 17>,
          <&sdma 18>;
   dma-names = "tx", "rx";
   status = "disabled";
  };

  mcbsp3: mcbsp@40126000 {
   compatible = "ti,omap4-mcbsp";
   reg = <0x40126000 0xff>,
         <0x49026000 0xff>;
   reg-names = "mpu", "dma";
   interrupts = <0 23 4>;
   interrupt-names = "common";
   ti,buffer-size = <128>;
   ti,hwmods = "mcbsp3";
   dmas = <&sdma 19>,
          <&sdma 20>;
   dma-names = "tx", "rx";
   status = "disabled";
  };

  mailbox: mailbox@4a0f4000 {
   compatible = "ti,omap4-mailbox";
   reg = <0x4a0f4000 0x200>;
   interrupts = <0 26 4>;
   ti,hwmods = "mailbox";
   #mbox-cells = <1>;
   ti,mbox-num-users = <3>;
   ti,mbox-num-fifos = <8>;
   mbox_ipu: mbox_ipu {
    ti,mbox-tx = <0 0 0>;
    ti,mbox-rx = <1 0 0>;
   };
   mbox_dsp: mbox_dsp {
    ti,mbox-tx = <3 0 0>;
    ti,mbox-rx = <2 0 0>;
   };
  };

  timer1: timer@4ae18000 {
   compatible = "ti,omap5430-timer";
   reg = <0x4ae18000 0x80>;
   interrupts = <0 37 4>;
   ti,hwmods = "timer1";
   ti,timer-alwon;
  };

  timer2: timer@48032000 {
   compatible = "ti,omap5430-timer";
   reg = <0x48032000 0x80>;
   interrupts = <0 38 4>;
   ti,hwmods = "timer2";
  };

  timer3: timer@48034000 {
   compatible = "ti,omap5430-timer";
   reg = <0x48034000 0x80>;
   interrupts = <0 39 4>;
   ti,hwmods = "timer3";
  };

  timer4: timer@48036000 {
   compatible = "ti,omap5430-timer";
   reg = <0x48036000 0x80>;
   interrupts = <0 40 4>;
   ti,hwmods = "timer4";
  };

  timer5: timer@40138000 {
   compatible = "ti,omap5430-timer";
   reg = <0x40138000 0x80>,
         <0x49038000 0x80>;
   interrupts = <0 41 4>;
   ti,hwmods = "timer5";
   ti,timer-dsp;
   ti,timer-pwm;
  };

  timer6: timer@4013a000 {
   compatible = "ti,omap5430-timer";
   reg = <0x4013a000 0x80>,
         <0x4903a000 0x80>;
   interrupts = <0 42 4>;
   ti,hwmods = "timer6";
   ti,timer-dsp;
   ti,timer-pwm;
  };

  timer7: timer@4013c000 {
   compatible = "ti,omap5430-timer";
   reg = <0x4013c000 0x80>,
         <0x4903c000 0x80>;
   interrupts = <0 43 4>;
   ti,hwmods = "timer7";
   ti,timer-dsp;
  };

  timer8: timer@4013e000 {
   compatible = "ti,omap5430-timer";
   reg = <0x4013e000 0x80>,
         <0x4903e000 0x80>;
   interrupts = <0 44 4>;
   ti,hwmods = "timer8";
   ti,timer-dsp;
   ti,timer-pwm;
  };

  timer9: timer@4803e000 {
   compatible = "ti,omap5430-timer";
   reg = <0x4803e000 0x80>;
   interrupts = <0 45 4>;
   ti,hwmods = "timer9";
   ti,timer-pwm;
  };

  timer10: timer@48086000 {
   compatible = "ti,omap5430-timer";
   reg = <0x48086000 0x80>;
   interrupts = <0 46 4>;
   ti,hwmods = "timer10";
   ti,timer-pwm;
  };

  timer11: timer@48088000 {
   compatible = "ti,omap5430-timer";
   reg = <0x48088000 0x80>;
   interrupts = <0 47 4>;
   ti,hwmods = "timer11";
   ti,timer-pwm;
  };

  wdt2: wdt@4ae14000 {
   compatible = "ti,omap5-wdt", "ti,omap3-wdt";
   reg = <0x4ae14000 0x80>;
   interrupts = <0 80 4>;
   ti,hwmods = "wd_timer2";
  };

  dsp: dsp {
   compatible = "ti,omap5-rproc-dsp";
   ti,hwmods = "dsp";
   syscon-bootreg = <&scm_conf 0x304>;
   iommus = <&mmu_dsp>;
   mboxes = <&mailbox &mbox_dsp>;
   status = "disabled";
  };

  ipu: ipu@55020000 {
   compatible = "ti,omap5-rproc-ipu";
   reg = <0x55020000 0x10000>;
   reg-names = "l2ram";
   ti,hwmods = "ipu";
   iommus = <&mmu_ipu>;
   mboxes = <&mailbox &mbox_ipu>;
   status = "disabled";
  };

  dmm@4e000000 {
   compatible = "ti,omap5-dmm";
   reg = <0x4e000000 0x800>;
   interrupts = <0 113 0x4>;
   ti,hwmods = "dmm";
  };

  emif1: emif@4c000000 {
   compatible = "ti,emif-4d5";
   ti,hwmods = "emif1";
   ti,no-idle-on-init;
   phy-type = <2>;
   reg = <0x4c000000 0x400>;
   interrupts = <0 110 4>;
   hw-caps-read-idle-ctrl;
   hw-caps-ll-interface;
   hw-caps-temp-alert;
  };

  emif2: emif@4d000000 {
   compatible = "ti,emif-4d5";
   ti,hwmods = "emif2";
   ti,no-idle-on-init;
   phy-type = <2>;
   reg = <0x4d000000 0x400>;
   interrupts = <0 111 4>;
   hw-caps-read-idle-ctrl;
   hw-caps-ll-interface;
   hw-caps-temp-alert;
  };

  usb3: omap_dwc3@4a020000 {
   compatible = "ti,dwc3";
   ti,hwmods = "usb_otg_ss";
   reg = <0x4a020000 0x10000>;
   interrupts = <0 93 4>;
   #address-cells = <1>;
   #size-cells = <1>;
   utmi-mode = <2>;
   ranges;
   dwc3@4a030000 {
    compatible = "snps,dwc3";
    reg = <0x4a030000 0x10000>;
    interrupts = <0 92 4>,
          <0 92 4>,
          <0 93 4>;
    interrupt-names = "peripheral",
        "host",
        "otg";
    phys = <&usb2_phy>, <&usb3_phy>;
    phy-names = "usb2-phy", "usb3-phy";
    dr_mode = "peripheral";
    tx-fifo-resize;
   };
  };

  ocp2scp@4a080000 {
   compatible = "ti,omap-ocp2scp";
   #address-cells = <1>;
   #size-cells = <1>;
   reg = <0x4a080000 0x20>;
   ranges;
   ti,hwmods = "ocp2scp1";
   usb2_phy: usb2phy@4a084000 {
    compatible = "ti,omap-usb2";
    reg = <0x4a084000 0x7c>;
    syscon-phy-power = <&scm_conf 0x300>;
    clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
    clock-names = "wkupclk", "refclk";
    #phy-cells = <0>;
   };

   usb3_phy: usb3phy@4a084400 {
    compatible = "ti,omap-usb3";
    reg = <0x4a084400 0x80>,
          <0x4a084800 0x64>,
          <0x4a084c00 0x40>;
    reg-names = "phy_rx", "phy_tx", "pll_ctrl";
    syscon-phy-power = <&scm_conf 0x370>;
    clocks = <&usb_phy_cm_clk32k>,
      <&sys_clkin>,
      <&usb_otg_ss_refclk960m>;
    clock-names = "wkupclk",
      "sysclk",
      "refclk";
    #phy-cells = <0>;
   };
  };

  usbhstll: usbhstll@4a062000 {
   compatible = "ti,usbhs-tll";
   reg = <0x4a062000 0x1000>;
   interrupts = <0 78 4>;
   ti,hwmods = "usb_tll_hs";
  };

  usbhshost: usbhshost@4a064000 {
   compatible = "ti,usbhs-host";
   reg = <0x4a064000 0x800>;
   ti,hwmods = "usb_host_hs";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges;
   clocks = <&l3init_60m_fclk>,
     <&xclk60mhsp1_ck>,
     <&xclk60mhsp2_ck>;
   clock-names = "refclk_60m_int",
          "refclk_60m_ext_p1",
          "refclk_60m_ext_p2";

   usbhsohci: ohci@4a064800 {
    compatible = "ti,ohci-omap3";
    reg = <0x4a064800 0x400>;
    interrupts = <0 76 4>;
   };

   usbhsehci: ehci@4a064c00 {
    compatible = "ti,ehci-omap";
    reg = <0x4a064c00 0x400>;
    interrupts = <0 77 4>;
   };
  };

  bandgap: bandgap@4a0021e0 {
   reg = <0x4a0021e0 0xc
          0x4a00232c 0xc
          0x4a002380 0x2c
          0x4a0023C0 0x3c>;
   interrupts = <0 126 4>;
   compatible = "ti,omap5430-bandgap";

   #thermal-sensor-cells = <1>;
  };


  ocp2scp@4a090000 {
   compatible = "ti,omap-ocp2scp";
   #address-cells = <1>;
   #size-cells = <1>;
   reg = <0x4a090000 0x20>;
   ranges;
   ti,hwmods = "ocp2scp3";
   sata_phy: phy@4a096000 {
    compatible = "ti,phy-pipe3-sata";
    reg = <0x4A096000 0x80>,
          <0x4A096400 0x64>,
          <0x4A096800 0x40>;
    reg-names = "phy_rx", "phy_tx", "pll_ctrl";
    syscon-phy-power = <&scm_conf 0x374>;
    clocks = <&sys_clkin>, <&sata_ref_clk>;
    clock-names = "sysclk", "refclk";
    #phy-cells = <0>;
   };
  };

  sata: sata@4a141100 {
   compatible = "snps,dwc-ahci";
   reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
   interrupts = <0 54 4>;
   phys = <&sata_phy>;
   phy-names = "sata-phy";
   clocks = <&sata_ref_clk>;
   ti,hwmods = "sata";
  };

  dss: dss@58000000 {
   compatible = "ti,omap5-dss";
   reg = <0x58000000 0x80>;
   status = "disabled";
   ti,hwmods = "dss_core";
   clocks = <&dss_dss_clk>;
   clock-names = "fck";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges;

   dispc@58001000 {
    compatible = "ti,omap5-dispc";
    reg = <0x58001000 0x1000>;
    interrupts = <0 25 4>;
    ti,hwmods = "dss_dispc";
    clocks = <&dss_dss_clk>;
    clock-names = "fck";
   };

   rfbi: encoder@58002000 {
    compatible = "ti,omap5-rfbi";
    reg = <0x58002000 0x100>;
    status = "disabled";
    ti,hwmods = "dss_rfbi";
    clocks = <&dss_dss_clk>, <&l3_iclk_div>;
    clock-names = "fck", "ick";
   };

   dsi1: encoder@58004000 {
    compatible = "ti,omap5-dsi";
    reg = <0x58004000 0x200>,
          <0x58004200 0x40>,
          <0x58004300 0x40>;
    reg-names = "proto", "phy", "pll";
    interrupts = <0 53 4>;
    status = "disabled";
    ti,hwmods = "dss_dsi1";
    clocks = <&dss_dss_clk>, <&dss_sys_clk>;
    clock-names = "fck", "sys_clk";
   };

   dsi2: encoder@58005000 {
    compatible = "ti,omap5-dsi";
    reg = <0x58009000 0x200>,
          <0x58009200 0x40>,
          <0x58009300 0x40>;
    reg-names = "proto", "phy", "pll";
    interrupts = <0 55 4>;
    status = "disabled";
    ti,hwmods = "dss_dsi2";
    clocks = <&dss_dss_clk>, <&dss_sys_clk>;
    clock-names = "fck", "sys_clk";
   };

   hdmi: encoder@58060000 {
    compatible = "ti,omap5-hdmi";
    reg = <0x58040000 0x200>,
          <0x58040200 0x80>,
          <0x58040300 0x80>,
          <0x58060000 0x19000>;
    reg-names = "wp", "pll", "phy", "core";
    interrupts = <0 101 4>;
    status = "disabled";
    ti,hwmods = "dss_hdmi";
    clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
    clock-names = "fck", "sys_clk";
    dmas = <&sdma 76>;
    dma-names = "audio_tx";
   };
  };

  abb_mpu: regulator-abb-mpu {
   compatible = "ti,abb-v2";
   regulator-name = "abb_mpu";
   #address-cells = <0>;
   #size-cells = <0>;
   clocks = <&sys_clkin>;
   ti,settling-time = <50>;
   ti,clock-cycles = <16>;

   reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
         <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
   reg-names = "base-address", "int-address",
        "efuse-address", "ldo-address";
   ti,tranxdone-status-mask = <0x80>;

   ti,ldovbb-override-mask = <0x400>;

   ti,ldovbb-vset-mask = <0x1F>;





   ti,abb_info = <

   1060000 0 0x0 0 0x02000000 0x01F00000
   1250000 0 0x4 0 0x02000000 0x01F00000
   >;
  };

  abb_mm: regulator-abb-mm {
   compatible = "ti,abb-v2";
   regulator-name = "abb_mm";
   #address-cells = <0>;
   #size-cells = <0>;
   clocks = <&sys_clkin>;
   ti,settling-time = <50>;
   ti,clock-cycles = <16>;

   reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
         <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
   reg-names = "base-address", "int-address",
        "efuse-address", "ldo-address";
   ti,tranxdone-status-mask = <0x80000000>;

   ti,ldovbb-override-mask = <0x400>;

   ti,ldovbb-vset-mask = <0x1F>;





   ti,abb_info = <

   1025000 0 0x0 0 0x02000000 0x01F00000
   1120000 0 0x4 0 0x02000000 0x01F00000
   >;
  };

  voltdm_mpu: voltdm@4a0021c4 {
   compatible = "ti,omap5-voltdm";
   #voltdm-cells = <0>;
   vbb-supply = <&abb_mpu>;
   reg = <0x4a0021c4 0x8>;
   ti,efuse-settings = <

   1060000 0x0
   1250000 0x4
   >;
  };

  voltdm_mm: voltdm@4a0021a4 {
   compatible = "ti,omap5-voltdm";
   #voltdm-cells = <0>;
   vbb-supply = <&abb_mm>;
   reg = <0x4a0021a4 0x8>;
   ti,efuse-settings = <

   1025000 0x0
   1120000 0x4
   >;
  };

  voltdm_core: voltdm@4a0021d8 {
   compatible = "ti,omap5-core-voltdm";
   #voltdm-cells = <0>;
   reg = <0x4a0021d8 0x4>;
   ti,efuse-settings = <

   1050000 0x0
   >;
  };
 };
};

&cpu_thermal {
 polling-delay = <500>;
};

/include/ "omap54xx-clocks.dtsi"
# 7 "arch/arm/boot/dts/omap5-cm-t54.dts" 2



/ {
 model = "CompuLab CM-T54";
 compatible = "compulab,omap5-cm-t54", "ti,omap5";

 memory {
  device_type = "memory";
  reg = <0x80000000 0x7F000000>;
 };

 aliases {
  display0 = &hdmi0;
  display1 = &dvi0;
  display2 = &lcd0;
 };

 vmmcsd_fixed: fixed-regulator-mmcsd {
  compatible = "regulator-fixed";
  regulator-name = "vmmcsd_fixed";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
 };

 vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
  compatible = "regulator-fixed";
  regulator-name = "vwlan_pdn_fixed";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&ldo2_reg>;
  gpio = <&gpio4 13 0>;
  startup-delay-us = <1000>;
  enable-active-high;
 };

 vwlan_fixed: fixed-regulator-vwlan {
  compatible = "regulator-fixed";
  regulator-name = "vwlan_fixed";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vwlan_pdn_fixed>;
  gpio = <&gpio4 14 0>;
  startup-delay-us = <1000>;
  enable-active-high;
 };

 ads7846reg: ads7846-reg {
  compatible = "regulator-fixed";
  regulator-name = "ads7846-reg";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
 };


 hsusb2_phy: hsusb2_phy {
  compatible = "usb-nop-xceiv";
  reset-gpios = <&gpio3 12 1>;
 };


 hsusb3_phy: hsusb3_phy {
  compatible = "usb-nop-xceiv";
  reset-gpios = <&gpio3 19 1>;
 };

 leds {
  compatible = "gpio-leds";
  led@1 {
   label = "Heartbeat";
   gpios = <&gpio3 16 0>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };
 };

 lcd0: display {
                compatible = "startek,startek-kd050c", "panel-dpi";
                label = "lcd";

                pinctrl-names = "default";
                pinctrl-0 = <&lcd_pins>;

                enable-gpios = <&gpio8 3 0>;

                panel-timing {
                        clock-frequency = <33000000>;
                        hactive = <800>;
                        vactive = <480>;
                        hfront-porch = <40>;
                        hback-porch = <40>;
                        hsync-len = <43>;
                        vback-porch = <29>;
                        vfront-porch = <13>;
                        vsync-len = <3>;
                        hsync-active = <0>;
                        vsync-active = <0>;
                        de-active = <1>;
                        pixelclk-active = <1>;
                };

                port {
                        lcd_in: endpoint {
                                remote-endpoint = <&dpi_lcd_out>;
                        };
                };
        };

 hdmi0: connector@0 {
  compatible = "hdmi-connector";
  label = "hdmi";

  type = "a";

  pinctrl-names = "default";
  pinctrl-0 = <&hdmi_conn_pins>;

  hpd-gpios = <&gpio7 1 0>;

  port {
   hdmi_connector_in: endpoint {
    remote-endpoint = <&hdmi_out>;
   };
  };
 };

 tfp410: encoder@0 {
  compatible = "ti,tfp410";

  ports {
   #address-cells = <1>;
   #size-cells = <0>;

   port@0 {
    reg = <0>;

    tfp410_in: endpoint@0 {
     remote-endpoint = <&dpi_dvi_out>;
    };
   };

   port@1 {
    reg = <1>;

    tfp410_out: endpoint@0 {
     remote-endpoint = <&dvi_connector_in>;
    };
   };
  };
 };

 dvi0: connector@1 {
  compatible = "dvi-connector";
  label = "dvi";

  digital;

  ddc-i2c-bus = <&i2c2>;

  port {
   dvi_connector_in: endpoint {
    remote-endpoint = <&tfp410_out>;
   };
  };
 };
};

&omap5_pmx_wkup {

 ads7846_pins: pinmux_ads7846_pins {
  pinctrl-single,pins = <
   0x02 (((1 << 3) | (1 << 8)) | 6)
  >;
 };
};

&omap5_pmx_core {
 pinctrl-names = "default";
 pinctrl-0 = <
   &led_gpio_pins
   &usbhost_pins
 >;

 led_gpio_pins: pinmux_led_gpio_pins {
  pinctrl-single,pins = <
   (((0x00b0)) - (0x0040)) (0 | 6)
  >;
 };

 i2c1_pins: pinmux_i2c1_pins {
  pinctrl-single,pins = <
   (((0x01f2)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01f4)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
  >;
 };

 i2c2_pins: pinmux_i2c2_pins {
  pinctrl-single,pins = <
   (((0x01b8)) - (0x0040)) ((1 << 8) | 0)
   (((0x01ba)) - (0x0040)) ((1 << 8) | 0)
  >;
 };

 mmc1_pins: pinmux_mmc1_pins {
  pinctrl-single,pins = <
   (((0x01e2)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01e4)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01e6)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01e8)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01ea)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01ec)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
  >;
 };

 mmc2_pins: pinmux_mmc2_pins {
  pinctrl-single,pins = <
   (((0x0040)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0042)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0044)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0046)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0048)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x004a)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x004c)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x004e)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0050)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0052)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
  >;
 };

 mmc3_pins: pinmux_mmc3_pins {
  pinctrl-single,pins = <
   (((0x01a4)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01a6)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01a8)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01aa)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01ac)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x01ae)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
  >;
 };

 wlan_gpios_pins: pinmux_wlan_gpios_pins {
  pinctrl-single,pins = <
   (((0x019c)) - (0x0040)) ((0 | (1 << 3)) | 6)
   (((0x019e)) - (0x0040)) ((0 | (1 << 3)) | 6)
  >;
 };

 usbhost_pins: pinmux_usbhost_pins {
  pinctrl-single,pins = <
   (((0x00c4)) - (0x0040)) ((1 << 8) | 0)
   (((0x00c6)) - (0x0040)) ((1 << 8) | 0)

   (((0x01dc)) - (0x0040)) ((1 << 8) | 0)
   (((0x01de)) - (0x0040)) ((1 << 8) | 0)

   (((0x00a8)) - (0x0040)) (0 | 6)
   (((0x00b6)) - (0x0040)) (0 | 6)
  >;
 };

 dss_hdmi_pins: pinmux_dss_hdmi_pins {
  pinctrl-single,pins = <
   (((0x013c)) - (0x0040)) (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
   (((0x0140)) - (0x0040)) ((1 << 8) | 0)
   (((0x0142)) - (0x0040)) ((1 << 8) | 0)
  >;
 };

 lcd_pins: pinmux_lcd_pins {
  pinctrl-single,pins = <
   (((0x0172)) - (0x0040)) ((0 | (1 << 3)) | 6)
  >;
 };

 hdmi_conn_pins: pinmux_hdmi_conn_pins {
  pinctrl-single,pins = <
   (((0x013e)) - (0x0040)) ((1 << 8) | 6)
  >;
 };

 dss_dpi_pins: pinmux_dss_dpi_pins {
  pinctrl-single,pins = <
   (((0x0104)) - (0x0040)) (0 | 3)
   (((0x0106)) - (0x0040)) (0 | 3)
   (((0x0108)) - (0x0040)) (0 | 3)
   (((0x010a)) - (0x0040)) (0 | 3)
   (((0x010c)) - (0x0040)) (0 | 3)
   (((0x010e)) - (0x0040)) (0 | 3)
   (((0x0110)) - (0x0040)) (0 | 3)
   (((0x0112)) - (0x0040)) (0 | 3)
   (((0x0114)) - (0x0040)) (0 | 3)
   (((0x0116)) - (0x0040)) (0 | 3)
   (((0x0118)) - (0x0040)) (0 | 3)
   (((0x011a)) - (0x0040)) (0 | 3)
   (((0x011c)) - (0x0040)) (0 | 3)
   (((0x011e)) - (0x0040)) (0 | 3)
   (((0x0120)) - (0x0040)) (0 | 3)
   (((0x0122)) - (0x0040)) (0 | 3)
   (((0x0124)) - (0x0040)) (0 | 3)
   (((0x0126)) - (0x0040)) (0 | 3)
   (((0x0128)) - (0x0040)) (0 | 3)
   (((0x012a)) - (0x0040)) (0 | 3)
   (((0x012c)) - (0x0040)) (0 | 3)
   (((0x012e)) - (0x0040)) (0 | 3)
   (((0x0130)) - (0x0040)) (0 | 3)
   (((0x0132)) - (0x0040)) (0 | 3)
   (((0x0134)) - (0x0040)) (0 | 3)
   (((0x0136)) - (0x0040)) (0 | 3)
   (((0x0138)) - (0x0040)) (0 | 3)
   (((0x013a)) - (0x0040)) (0 | 3)
  >;
 };

 mcspi2_pins: pinmux_mcspi1_pins {
  pinctrl-single,pins = <
   (((0x00fc)) - (0x0040)) ((1 << 8) | 0)
   (((0x00fe)) - (0x0040)) ((1 << 8) | 0)
   (((0x0100)) - (0x0040)) ((1 << 8) | 0)
   (((0x0102)) - (0x0040)) ((1 << 8) | 0)
  >;
 };
};

&mcspi2 {
 pinctrl-names = "default";
 pinctrl-0 = <&mcspi2_pins>;


 ads7846@0 {
  pinctrl-names = "default";
  pinctrl-0 = <&ads7846_pins>;

  compatible = "ti,ads7846";
  vcc-supply = <&ads7846reg>;

  reg = <0>;
  spi-max-frequency = <1500000>;

  interrupt-parent = <&gpio1>;
  interrupts = <15 0>;
  pendown-gpio = <&gpio1 15 0>;


  ti,x-min = /bits/ 16 <0x0>;
  ti,x-max = /bits/ 16 <0x0fff>;
  ti,y-min = /bits/ 16 <0x0>;
  ti,y-max = /bits/ 16 <0x0fff>;

  ti,x-plate-ohms = /bits/ 16 <180>;
  ti,pressure-max = /bits/ 16 <255>;

  ti,debounce-max = /bits/ 16 <30>;
  ti,debounce-tol = /bits/ 16 <10>;
  ti,debounce-rep = /bits/ 16 <1>;

  linux,wakeup;
 };
};

&mmc1 {
 pinctrl-names = "default";
 pinctrl-0 = <&mmc1_pins>;
 vmmc-supply = <&ldo9_reg>;
 bus-width = <4>;
};

&mmc2 {
 pinctrl-names = "default";
 pinctrl-0 = <&mmc2_pins>;
 vmmc-supply = <&vmmcsd_fixed>;
 bus-width = <8>;
 ti,non-removable;
};

&mmc3 {
 pinctrl-names = "default";
 pinctrl-0 = <
  &mmc3_pins
  &wlan_gpios_pins
 >;
 vmmc-supply = <&vwlan_fixed>;
 bus-width = <4>;
 ti,non-removable;
};

&mmc4 {
 status = "disabled";
};

&mmc5 {
 status = "disabled";
};

&i2c1 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c1_pins>;

 clock-frequency = <400000>;

 at24@50 {
  compatible = "at24,24c02";
  pagesize = <16>;
  reg = <0x50>;
 };

 palmas: palmas@48 {
  compatible = "ti,palmas";
  interrupts = <0 7 0>;
  reg = <0x48>;
  interrupt-controller;
  #interrupt-cells = <2>;
  ti,system-power-controller;

  extcon_usb3: palmas_usb {
   compatible = "ti,palmas-usb-vid";
   ti,enable-vbus-detection;
   ti,enable-id-detection;
   ti,wakeup;
  };

  rtc {
   compatible = "ti,palmas-rtc";
   interrupt-parent = <&palmas>;
   interrupts = <8 0>;
  };

  palmas_pmic {
   compatible = "ti,palmas-pmic";
   interrupt-parent = <&palmas>;
   interrupts = <14 0>;
   interrupt-name = "short-irq";

   ti,ldo6-vibrator;

   regulators {
    smps123_reg: smps123 {

     regulator-name = "smps123";
     regulator-min-microvolt = < 600000>;
     regulator-max-microvolt = <1500000>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps45_reg: smps45 {

     regulator-name = "smps45";
     regulator-min-microvolt = < 600000>;
     regulator-max-microvolt = <1310000>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps6_reg: smps6 {

     regulator-name = "smps6";
     regulator-min-microvolt = <1500000>;
     regulator-max-microvolt = <1500000>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps7_reg: smps7 {

     regulator-name = "smps7";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps8_reg: smps8 {

     regulator-name = "smps8";
     regulator-min-microvolt = < 600000>;
     regulator-max-microvolt = <1310000>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps9_reg: smps9 {

     regulator-name = "smps9";
     regulator-min-microvolt = <3300000>;
     regulator-max-microvolt = <3300000>;
     ti,smps-range = <0x80>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps10_out2_reg: smps10_out2 {

     regulator-name = "smps10_out2";
     regulator-min-microvolt = <5000000>;
     regulator-max-microvolt = <5000000>;
     regulator-always-on;
     regulator-boot-on;
    };

    smps10_out1_reg: smps10_out1 {

     regulator-name = "smps10_out1";
     regulator-min-microvolt = <5000000>;
     regulator-max-microvolt = <5000000>;
    };

    ldo1_reg: ldo1 {

     regulator-name = "ldo1";
     regulator-min-microvolt = <1500000>;
     regulator-max-microvolt = <1800000>;
    };

    ldo2_reg: ldo2 {

     regulator-name = "ldo2";
     regulator-min-microvolt = <3300000>;
     regulator-max-microvolt = <3300000>;
     startup-delay-us = <1000>;
    };

    ldo3_reg: ldo3 {

     regulator-name = "ldo3";
     regulator-min-microvolt = <1500000>;
     regulator-max-microvolt = <1500000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldo4_reg: ldo4 {

     regulator-name = "ldo4";
     regulator-min-microvolt = <1500000>;
     regulator-max-microvolt = <1800000>;
    };

    ldo5_reg: ldo5 {

     regulator-name = "ldo5";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldo6_reg: ldo6 {

     regulator-name = "ldo6";
     regulator-min-microvolt = <1200000>;
     regulator-max-microvolt = <1200000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldo7_reg: ldo7 {

     regulator-name = "ldo7";
     regulator-min-microvolt = <2000000>;
     regulator-max-microvolt = <2000000>;

     status = "disabled";
    };

    ldo8_reg: ldo8 {

     regulator-name = "ldo8";
     regulator-min-microvolt = <3000000>;
     regulator-max-microvolt = <3000000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldo9_reg: ldo9 {

     regulator-name = "ldo9";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <3000000>;
     regulator-boot-on;
    };

    ldoln_reg: ldoln {

     regulator-name = "ldoln";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldousb_reg: ldousb {

     regulator-name = "ldousb";
     regulator-min-microvolt = <3250000>;
     regulator-max-microvolt = <3250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    regen3_reg: regen3 {

     regulator-name = "regen3";
     regulator-always-on;
     regulator-boot-on;
    };
   };
  };
 };
};

&i2c2 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c2_pins>;

 clock-frequency = <100000>;
};

&usbhshost {
 port2-mode = "ehci-hsic";
 port3-mode = "ehci-hsic";
};

&usbhsehci {
 phys = <0 &hsusb2_phy &hsusb3_phy>;
};

&usb3 {
       extcon = <&extcon_usb3>;
       vbus-supply = <&smps10_out1_reg>;
};

&cpu0 {
 cpu0-supply = <&smps123_reg>;
};

&dss {
 status = "ok";

 pinctrl-names = "default";
 pinctrl-0 = <&dss_dpi_pins>;

 port {
  dpi_dvi_out: endpoint@0 {
   remote-endpoint = <&tfp410_in>;
   data-lines = <24>;
  };

  dpi_lcd_out: endpoint@1 {
   remote-endpoint = <&lcd_in>;
   data-lines = <24>;
  };
 };
};

&dsi2 {
 status = "ok";
 vdd-supply = <&ldo4_reg>;
};

&hdmi {
 status = "ok";
 vdda-supply = <&ldo4_reg>;

 pinctrl-names = "default";
 pinctrl-0 = <&dss_hdmi_pins>;

 port {
  hdmi_out: endpoint {
   remote-endpoint = <&hdmi_connector_in>;
   lanes = <1 0 3 2 5 4 7 6>;
  };
 };
};