/*
 * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/ {
	aliases {
		rtc0 = &tps659038_rtc;
		rtc1 = &rtc;
		display0 = &hdmi0;
		sound0 = &hdmi;
	};

	vmain: fixedregulator-vmain {
		compatible = "regulator-fixed";
		regulator-name = "VMAIN";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	v3_3d: fixedregulator-v3_3d {
		compatible = "regulator-fixed";
		regulator-name = "V3_3D";
		vin-supply = <&smps9_reg>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vtt_fixed: fixedregulator-vtt {
		/* TPS51200 */
		compatible = "regulator-fixed";
		regulator-name = "vtt_fixed";
		vin-supply = <&v3_3d>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	hdmi0: connector@0 {
		compatible = "hdmi-connector";
		label = "hdmi";

		type = "a";

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&tpd12s015_out>;
			};
		};
	};

	tpd12s015: encoder@0 {
		compatible = "ti,tpd12s016", "ti,tpd12s015";

		gpios = <0>, /* optional CT_CP_HPD */
			<0>, /* optional LS_OE */
			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tpd12s015_in: endpoint@0 {
					remote-endpoint = <&hdmi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tpd12s015_out: endpoint@0 {
					remote-endpoint = <&hdmi_connector_in>;
				};
			};
		};
	};

	src_clk_x1: src_clk_x1 {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <20000000>;
	};
};

&dra7_pmx_core {
	dcan1_pins_default: dcan1_pins_default {
		pinctrl-single,pins = <
			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
			0x3d4   (PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */
		>;
	};

	dcan1_pins_sleep: dcan1_pins_sleep {
		pinctrl-single,pins = <
			0x3d0   (MUX_MODE15 | PULL_UP)  /* dcan1_tx.off */
			0x3d4   (MUX_MODE15 | PULL_UP)  /* dcan1_rx.off */
		>;
	};
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	tps659038: tps659038@58 {
		compatible = "ti,tps659038";
		reg = <0x58>;
		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
			       &dra7_pmx_core 0x418>;
		#interrupt-cells = <2>;
		interrupt-controller;
		ti,system-power-controller;

		tps659038_pmic {
			compatible = "ti,tps659038-pmic";
			regulators {
				smps12_reg: smps12 {
					/* VDD_MPU */
					vin-supply = <&vmain>;
					regulator-name = "smps12";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1250000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps3_reg: smps3 {
					/* VDD_DDR EMIF1 EMIF2 */
					vin-supply = <&vmain>;
					regulator-name = "smps3";
					regulator-min-microvolt = <1350000>;
					regulator-max-microvolt = <1350000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps45_reg: smps45 {
					/* VDD_DSPEVE on AM572 */
					/* VDD_IVA + VDD_DSP on AM571 */
					vin-supply = <&vmain>;
					regulator-name = "smps45";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1250000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps6_reg: smps6 {
					/* VDD_GPU */
					vin-supply = <&vmain>;
					regulator-name = "smps6";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1250000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps7_reg: smps7 {
					/* VDD_CORE */
					vin-supply = <&vmain>;
					regulator-name = "smps7";
					regulator-min-microvolt = <850000>;
					regulator-max-microvolt = <1150000>;
					regulator-always-on;
					regulator-boot-on;
				};

				smps8_reg: smps8 {
					/* 5728 - VDD_IVAHD */
					/* 5718 - N.C. test point */
					vin-supply = <&vmain>;
					regulator-name = "smps8";
				};

				smps9_reg: smps9 {
					/* VDD_3_3D */
					vin-supply = <&vmain>;
					regulator-name = "smps9";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo1_reg: ldo1 {
					/* VDDSHV8 - VSDMMC  */
					/* NOTE: on rev 1.3a, data supply */
					vin-supply = <&vmain>;
					regulator-name = "ldo1";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-boot-on;
					regulator-always-on;
				};

				ldo2_reg: ldo2 {
					/* VDDSH18V */
					vin-supply = <&vmain>;
					regulator-name = "ldo2";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo3_reg: ldo3 {
					/* R1.2a 572x V1_8PHY: USB1,2,3, SATA, PCIE, HDMI */
					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
					/* R1.2a 571x V1_8PHY_LDO3: USB1,2, CSI; V1_8PHYA: SATA */
					vin-supply = <&vmain>;
					regulator-name = "ldo3";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldo4_reg: ldo4 {
					/* R1.2a 572x - unused */
					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI */
					/* R1.2a 571x V1_8PHY_LDO4: V1_8PHYB: USB3, PCIE, HDMI */
					vin-supply = <&vmain>;
					regulator-name = "ldo4";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				/* LDO5-8 unused */

				ldo9_reg: ldo9 {
					/* VDD_RTC (unused in rev 1.3a am572x-idk) */
					vin-supply = <&vmain>;
					regulator-name = "ldo9";
					regulator-min-microvolt = <840000>;
					regulator-max-microvolt = <1160000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldoln_reg: ldoln {
					/* VDDA_1V8_PLL */
					vin-supply = <&vmain>;
					regulator-name = "ldoln";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldousb_reg: ldousb {
					/* VDDA_3V_USB: VDDA_USBHS33 */
					vin-supply = <&vmain>;
					regulator-name = "ldousb";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-always-on;
					regulator-boot-on;
				};

				ldortc_reg: ldortc {
					/* VDDA_RTC  (unused on rev am572x 1.3a) */
					vin-supply = <&vmain>;
					regulator-name = "ldortc";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
					regulator-boot-on;
				};

				regen1: regen1 {
					/* VDD_3V3_ON */
					regulator-name = "regen1";
					regulator-boot-on;
					regulator-always-on;
				};

				regen2: regen2 {
					/* Needed for PMIC internal resource */
					regulator-name = "regen2";
					regulator-boot-on;
					regulator-always-on;
				};
			};
		};

		tps659038_rtc: tps659038_rtc {
			compatible = "ti,palmas-rtc";
			interrupt-parent = <&tps659038>;
			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
			wakeup-source;
		};

		tps659038_pwr_button: tps659038_pwr_button {
			compatible = "ti,palmas-pwrbutton";
			interrupt-parent = <&tps659038>;
			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
			wakeup-source;
			ti,palmas-long-press-seconds = <12>;
		};

		tps659038_gpio: tps659038_gpio {
			compatible = "ti,palmas-gpio";
			gpio-controller;
			#gpio-cells = <2>;
		};
	};

	tc358778: tc358778@0e {
		compatible = "toshiba,tc358778", "toshiba,tc358768";
		reg = <0x0e>;
		status = "disabled";

		clocks = <&src_clk_x1>;
		clock-names = "refclk";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				tc358778_in: endpoint {
					remote-endpoint = <&dpi_out>;
					data-lines = <24>;
				};
			};

			port@1 {
				reg = <1>;
				tc358778_out: endpoint {
					/*
					 * lanes and remote-endpoint defined per
					 * panel.
					 */
				};
			};
		};
	};

	ov2659: ov2659@30 {
		compatible = "ovti,ov2659";
		reg = <0x30>;

		clocks = <&src_clk_x1>;
		clock-names = "xvclk";

		pwrdn-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;

		port {
			ov2659_1: endpoint {
				hsync-active = <1>;
				vsync-active = <1>;
				pclk-sample = <1>;
				link-frequencies = /bits/ 64 <70000000>;
			};
		};
	};
};

&uart3 {
	status = "okay";
	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
			       &dra7_pmx_core 0x248>;
};

&voltdm_mpu {
	vdd-supply = <&smps12_reg>;
};

&voltdm_dspeve {
	vdd-supply = <&smps45_reg>;
};

&voltdm_gpu {
	vdd-supply = <&smps45_reg>;
};

&voltdm_ivahd {
	vdd-supply = <&smps45_reg>;
};

&voltdm_core {
	vdd-supply = <&smps6_reg>;
};

&cpu0 {
	cpu0-voltdm = <&voltdm_mpu>;
	voltage-tolerance = <1>;
};

&rtc {
	status = "okay";
	ext-clk-src;
};

&mac {
	status = "okay";
	dual_emac;
};

&cpsw_emac0 {
	phy_id = <&davinci_mdio>, <0>;
	phy-mode = "rgmii";
	dual_emac_res_vlan = <1>;
};

&cpsw_emac1 {
	phy_id = <&davinci_mdio>, <1>;
	phy-mode = "rgmii";
	dual_emac_res_vlan = <2>;
};

&usb2_phy1 {
	phy-supply = <&ldousb_reg>;
};

&usb2_phy2 {
	phy-supply = <&ldousb_reg>;
};

&usb1 {
	dr_mode = "host";
};

&usb2 {
	dr_mode = "otg";
};

&dcan1 {
	status = "okay";
	pinctrl-names = "default", "sleep", "active";
	pinctrl-0 = <&dcan1_pins_sleep>;
	pinctrl-1 = <&dcan1_pins_sleep>;
	pinctrl-2 = <&dcan1_pins_default>;
};

&mmc1 {
	status = "okay";
	pinctrl-names = "default", "hs";
	pinctrl-0 = <&mmc1_pins_default>;
	pinctrl-1 = <&mmc1_pins_hs>;
	vmmc-supply = <&ldo1_reg>;
	bus-width = <4>;
	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
	max-frequency = <96000000>;
	/delete-property/ sd-uhs-sdr104;
	/delete-property/ sd-uhs-sdr50;
	/delete-property/ sd-uhs-ddr50;
	/delete-property/ sd-uhs-sdr25;
	/delete-property/ sd-uhs-sdr12;
};

&mmc2 {
	status = "okay";
	pinctrl-names = "default", "hs";
	pinctrl-0 = <&mmc2_pins_default>;
	pinctrl-1 = <&mmc2_pins_hs>;
	vmmc-supply = <&v3_3d>;
	bus-width = <8>;
	ti,non-removable;
	max-frequency = <96000000>;
};

&mailbox3 {
	status = "okay";
	mbox_pru1_0: mbox_pru1_0 {
		status = "okay";
	};
	mbox_pru1_1: mbox_pru1_1 {
		status = "okay";
	};
};

&mailbox4 {
	status = "okay";
	mbox_pru2_0: mbox_pru2_0 {
		status = "okay";
	};
	mbox_pru2_1: mbox_pru2_1 {
		status = "okay";
	};
};

&pruss1 {
	status = "okay";
	pru1_0: pru@4b234000 {
		mboxes = <&mailbox3 &mbox_pru1_0>;
		status = "okay";
	};

	pru1_1: pru@4b238000 {
		mboxes = <&mailbox3 &mbox_pru1_1>;
		status = "okay";
	};
};

&pruss2 {
	status = "okay";
	pru2_0: pru@4b2b4000 {
		mboxes = <&mailbox4 &mbox_pru2_0>;
		status = "okay";
	};

	pru2_1: pru@4b2b8000 {
		mboxes = <&mailbox4 &mbox_pru2_1>;
		status = "okay";
	};
};

&hdmi {
	status = "okay";
	/*
	 * XXX: Support AM572x-Rev 1.2a. this is wrong for AM571x-rev 1.3a,
	 * AM572x-Rev1.3a - but thanks to always-on, they work.
	 * TODO: SWITCH TO LDO4 once rev 1.2a is deprecated
	 * (on rev 1.3a availability)
	 */
	vdda-supply = <&ldo3_reg>;

	port {
		hdmi_out: endpoint {
			remote-endpoint = <&tpd12s015_in>;
		};
	};
};

&dss {
	status = "okay";

	vdda_video-supply = <&ldoln_reg>;

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			dpi_out: endpoint {
				remote-endpoint = <&tc358778_in>;
				data-lines = <24>;
			};
		};
	};
};