diff options
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/board.c | 21 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock.c | 6 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/cpu.h | 15 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/hardware.h | 4 |
4 files changed, 45 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 6de03fd657..772203fe5b 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -116,11 +116,27 @@ static int read_eeprom(void) return 0; } -/* UART Defines */ #ifdef CONFIG_SPL_BUILD +/* UART Defines */ #define UART_RESET (0x1 << 1) #define UART_CLK_RUNNING_MASK 0x1 #define UART_SMART_IDLE_EN (0x1 << 0x3) + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} #endif /* @@ -154,6 +170,9 @@ void s_init(void) /* Setup the PLLs and the clocks for the peripherals */ pll_init(); + /* Enable RTC32K clock */ + rtc32k_enable(); + /* UART softreset */ u32 regVal; diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 2b19506a34..f870859414 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -44,6 +44,7 @@ const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; +const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; static void enable_interface_clocks(void) { @@ -153,6 +154,11 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmper->spi0clkctrl); while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) ; + + /* RTC */ + writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); + while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 6cfbef76a7..819fd2f026 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -169,6 +169,12 @@ struct cm_dpll { unsigned int clktimer2clk; /* offset 0x08 */ }; +/* Control Module RTC registers */ +struct cm_rtc { + unsigned int rtcclkctrl; /* offset 0x0 */ + unsigned int clkstctrl; /* offset 0x4 */ +}; + /* Watchdog timer registers */ struct wd_timer { unsigned int resv1[4]; @@ -218,6 +224,15 @@ struct gptimer { unsigned int tcar2; /* offset 0x58 */ }; +/* RTC Registers */ +struct rtc_regs { + unsigned int res[21]; + unsigned int osc; /* offset 0x54 */ + unsigned int res2[5]; + unsigned int kick0r; /* offset 0x6c */ + unsigned int kick1r; /* offset 0x70 */ +}; + /* UART Registers */ struct uart_sys { unsigned int resv1[21]; diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 62332f2ded..5bd4bc8722 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -61,6 +61,7 @@ #define CM_WKUP 0x44E00400 #define CM_DPLL 0x44E00500 #define CM_DEVICE 0x44E00700 +#define CM_RTC 0x44E00800 #define CM_CEFUSE 0x44E00A00 #define PRM_DEVICE 0x44E00F00 @@ -83,4 +84,7 @@ #define AM335X_CPSW_BASE 0x4A100000 #define AM335X_CPSW_MDIO_BASE 0x4A101000 +/* RTC base address */ +#define AM335X_RTC_BASE 0x44E3E000 + #endif /* __AM33XX_HARDWARE_H */ |