diff options
240 files changed, 10836 insertions, 1367 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 38ad59058f..1e4830a30e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -164,9 +164,7 @@ config KIRKWOOD select CPU_ARM926EJS config ARCH_MVEBU - bool "Marvell MVEBU family (Armada XP/375/38x)" - select CPU_V7 - select SUPPORT_SPL + bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" select OF_CONTROL select OF_SEPARATE select DM @@ -174,10 +172,6 @@ config ARCH_MVEBU select DM_SERIAL select DM_SPI select DM_SPI_FLASH - select SPL_DM - select SPL_DM_SEQ_ALIAS - select SPL_OF_CONTROL - select SPL_SIMPLE_BUS config TARGET_DEVKIT3250 bool "Support devkit3250" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e89b6e8074..032c5aebc1 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -67,10 +67,12 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra210-p2571.dtb dtb-$(CONFIG_ARCH_MVEBU) += \ + armada-3720-db.dtb \ armada-375-db.dtb \ armada-388-clearfog.dtb \ armada-388-gp.dtb \ armada-385-amc.dtb \ + armada-7040-db.dtb \ armada-xp-gp.dtb \ armada-xp-maxbcm.dtb \ armada-xp-synology-ds414.dtb \ diff --git a/arch/arm/dts/armada-371x.dtsi b/arch/arm/dts/armada-371x.dtsi new file mode 100644 index 0000000000..c9e5325b8a --- /dev/null +++ b/arch/arm/dts/armada-371x.dtsi @@ -0,0 +1,53 @@ +/* + * Device Tree Include file for Marvell Armada 371x family of SoCs + * (also named 88F3710) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3710 SoC"; + compatible = "marvell,armada3710", "marvell,armada3700"; +}; diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts new file mode 100644 index 0000000000..83967eeac4 --- /dev/null +++ b/arch/arm/dts/armada-3720-db.dts @@ -0,0 +1,123 @@ +/* + * Device Tree file for Marvell Armada 3720 development board + * (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "armada-372x.dtsi" + +/ { + model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð0; + i2c0 = &i2c0; + spi0 = &spi0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; +}; + +&comphy { + phy0 { + phy-type = <PHY_TYPE_PEX0>; + phy-speed = <PHY_SPEED_2_5G>; + }; + + phy1 { + phy-type = <PHY_TYPE_USB3_HOST0>; + phy-speed = <PHY_SPEED_5G>; + }; +}; + +ð0 { + status = "okay"; + phy-mode = "rgmii"; +}; + +&i2c0 { + status = "okay"; +}; + +/* CON3 */ +&sata { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "spi-flash"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector CON32 through an FTDI */ +&uart0 { + status = "okay"; +}; + +/* CON29 */ +&usb2 { + status = "okay"; +}; + +/* CON31 */ +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/dts/armada-372x.dtsi b/arch/arm/dts/armada-372x.dtsi new file mode 100644 index 0000000000..5120296596 --- /dev/null +++ b/arch/arm/dts/armada-372x.dtsi @@ -0,0 +1,62 @@ +/* + * Device Tree Include file for Marvell Armada 372x family of SoCs + * (also named 88F3720) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3720 SoC"; + compatible = "marvell,armada3720", "marvell,armada3710"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm/dts/armada-37xx.dtsi b/arch/arm/dts/armada-37xx.dtsi new file mode 100644 index 0000000000..e27eae0362 --- /dev/null +++ b/arch/arm/dts/armada-37xx.dtsi @@ -0,0 +1,189 @@ +/* + * Device Tree Include file for Marvell Armada 37xx family of SoCs. + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/comphy/comphy_data.h> + +/ { + model = "Marvell Armada 37xx SoC"; + compatible = "marvell,armada3700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + internal-regs { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 32M internal register @ 0xd000_0000 */ + ranges = <0x0 0x0 0xd0000000 0x2000000>; + + uart0: serial@12000 { + compatible = "marvell,armada-3700-uart"; + reg = <0x12000 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb3: usb@58000 { + compatible = "marvell,armada3700-xhci", + "generic-xhci"; + reg = <0x58000 0x4000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb2: usb@5e000 { + compatible = "marvell,armada3700-ehci"; + reg = <0x5e000 0x450>; + status = "disabled"; + }; + + xor@60900 { + compatible = "marvell,armada-3700-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + + xor10 { + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + xor11 { + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + sata: sata@e0000 { + compatible = "marvell,armada-3700-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@1d00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1d00000 0x10000>, /* GICD */ + <0x1d40000 0x40000>; /* GICR */ + }; + + eth0: neta@30000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x30000 0x20>; + status = "disabled"; + }; + + eth1: neta@40000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x40000 0x20>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11000 0x100>; + status = "disabled"; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + reg = <0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <0>; + clock-frequency = <160000>; + spi-max-frequency = <40000>; + status = "disabled"; + }; + + comphy: comphy@18300 { + compatible = "marvell,mvebu-comphy", "marvell,comphy-armada-3700"; + reg = <0x18300 0x28>, + <0x1f300 0x3d000>; + mux-bitcount = <1>; + max-lanes = <2>; + }; + }; + }; +}; diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts new file mode 100644 index 0000000000..7d0059afe5 --- /dev/null +++ b/arch/arm/dts/armada-7040-db.dts @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada 7040 Development board platform + */ + +#include "armada-7040.dtsi" + +/ { + model = "Marvell Armada 7040 DB board"; + compatible = "marvell,armada7040-db", "marvell,armada7040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + i2c0 = &cpm_i2c0; + spi0 = &cpm_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + + +&cpm_pcie2 { + status = "okay"; +}; + +&cpm_i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&cpm_spi1 { + status = "okay"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cpm_sata0 { + status = "okay"; +}; + +&cpm_usb3_0 { + status = "okay"; +}; + +&cpm_usb3_1 { + status = "okay"; +}; + +&comphy_cp110 { + phy0 { + phy-type = <PHY_TYPE_SGMII2>; + phy-speed = <PHY_SPEED_3_125G>; + }; + + phy1 { + phy-type = <PHY_TYPE_USB3_HOST0>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy2 { + phy-type = <PHY_TYPE_SGMII0>; + phy-speed = <PHY_SPEED_1_25G>; + }; + + phy3 { + phy-type = <PHY_TYPE_SATA1>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy4 { + phy-type = <PHY_TYPE_USB3_HOST1>; + phy-speed = <PHY_SPEED_5G>; + }; + + phy5 { + phy-type = <PHY_TYPE_PEX2>; + phy-speed = <PHY_SPEED_5G>; + }; +}; + +&utmi0 { + status = "okay"; +}; + +&utmi1 { + status = "okay"; +}; diff --git a/arch/arm/dts/armada-7040.dtsi b/arch/arm/dts/armada-7040.dtsi new file mode 100644 index 0000000000..78d995d627 --- /dev/null +++ b/arch/arm/dts/armada-7040.dtsi @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and + * one CP110. + */ + +#include "armada-ap806-quad.dtsi" +#include "armada-cp110-master.dtsi" + +/ { + model = "Marvell Armada 7040"; + compatible = "marvell,armada7040", "marvell,armada-ap806-quad", + "marvell,armada-ap806"; +}; diff --git a/arch/arm/dts/armada-ap806-quad.dtsi b/arch/arm/dts/armada-ap806-quad.dtsi new file mode 100644 index 0000000000..ba43a4357b --- /dev/null +++ b/arch/arm/dts/armada-ap806-quad.dtsi @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada AP806. + */ + +#include "armada-ap806.dtsi" + +/ { + model = "Marvell Armada AP806 Quad"; + compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + }; + cpu@001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + }; + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + }; + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm/dts/armada-ap806.dtsi b/arch/arm/dts/armada-ap806.dtsi new file mode 100644 index 0000000000..d315b29cd0 --- /dev/null +++ b/arch/arm/dts/armada-ap806.dtsi @@ -0,0 +1,230 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada AP806. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/dts-v1/; + +/ { + model = "Marvell Armada AP806"; + compatible = "marvell,armada-ap806"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + ap806 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + xor@400000 { + compatible = "marvell,mv-xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,mv-xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,mv-xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,mv-xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_syscon 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&ap_syscon 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_syscon 3>; + status = "disabled"; + clock-frequency = <200000000>; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_syscon 3>; + status = "disabled"; + + }; + + ap_syscon: system-controller@6f4000 { + compatible = "marvell,ap806-system-controller", + "syscon"; + #clock-cells = <1>; + clock-output-names = "ap-cpu-cluster-0", + "ap-cpu-cluster-1", + "ap-fixed", "ap-mss"; + reg = <0x6f4000 0x1000>; + }; + }; + }; +}; diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi new file mode 100644 index 0000000000..7da98bf5cb --- /dev/null +++ b/arch/arm/dts/armada-cp110-master.dtsi @@ -0,0 +1,256 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada CP110 Master. + */ + +#include <dt-bindings/comphy/comphy_data.h> + +/ { + cp110-master { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0xf2000000 0x2000000>; + + cpm_syscon0: system-controller@440000 { + compatible = "marvell,cp110-system-controller0", + "syscon"; + reg = <0x440000 0x1000>; + #clock-cells = <2>; + core-clock-output-names = + "cpm-apll", "cpm-ppv2-core", "cpm-eip", + "cpm-core", "cpm-nand-core"; + gate-clock-output-names = + "cpm-audio", "cpm-communit", "cpm-nand", + "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", + "cpm-mg-core", "cpm-xor1", "cpm-xor0", + "cpm-gop-dp", "none", "cpm-pcie_x10", + "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", + "cpm-sata", "cpm-sata-usb", "cpm-main", + "cpm-sd-mmc", "none", "none", + "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", + "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; + }; + + cpm_sata0: sata@540000 { + compatible = "marvell,armada-8k-ahci"; + reg = <0x540000 0x30000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 15>; + status = "disabled"; + }; + + cpm_usb3_0: usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 22>; + status = "disabled"; + }; + + cpm_usb3_1: usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 23>; + status = "disabled"; + }; + + cpm_spi0: spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + cell-index = <1>; + clocks = <&cpm_syscon0 0 3>; + status = "disabled"; + }; + + cpm_spi1: spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + clocks = <&cpm_syscon0 1 21>; + status = "disabled"; + }; + + cpm_i2c0: i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 21>; + status = "disabled"; + }; + + cpm_i2c1: i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 21>; + status = "disabled"; + }; + + comphy_cp110: comphy@441000 { + compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110"; + reg = <0x441000 0x8>, + <0x120000 0x8>; + mux-bitcount = <4>; + max-lanes = <6>; + }; + + utmi0: utmi@580000 { + compatible = "marvell,mvebu-utmi-2.6.0"; + reg = <0x580000 0x1000>, /* utmi-unit */ + <0x440420 0x4>, /* usb-cfg */ + <0x440440 0x4>; /* utmi-cfg */ + utmi-port = <UTMI_PHY_TO_USB_HOST0>; + status = "disabled"; + }; + + utmi1: utmi@581000 { + compatible = "marvell,mvebu-utmi-2.6.0"; + reg = <0x581000 0x1000>, /* utmi-unit */ + <0x440420 0x4>, /* usb-cfg */ + <0x440444 0x4>; /* utmi-cfg */ + utmi-port = <UTMI_PHY_TO_USB_HOST1>; + status = "disabled"; + }; + }; + + cpm_pcie0: pcie@f2600000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2600000 0 0x10000>, + <0 0xf6f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&cpm_syscon0 1 13>; + status = "disabled"; + }; + + cpm_pcie1: pcie@f2620000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2620000 0 0x10000>, + <0 0xf7f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xf9010000 0 0xf9010000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&cpm_syscon0 1 11>; + status = "disabled"; + }; + + cpm_pcie2: pcie@f2640000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf2640000 0 0x10000>, + <0 0xf8f00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xf9020000 0 0xf9020000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&cpm_syscon0 1 12>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/tegra114-dalmore.dts b/arch/arm/dts/tegra114-dalmore.dts index 49195c3596..5f4df88f84 100644 --- a/arch/arm/dts/tegra114-dalmore.dts +++ b/arch/arm/dts/tegra114-dalmore.dts @@ -16,8 +16,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; + mmc0 = "/sdhci@78000600"; + mmc1 = "/sdhci@78000400"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d008000"; }; @@ -66,6 +66,7 @@ sdhci@78000600 { bus-width = <8>; status = "okay"; + non-removable; }; usb@7d000000 { @@ -78,4 +79,17 @@ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; status = "okay"; }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi index 88bdc49045..8932ea3afd 100644 --- a/arch/arm/dts/tegra114.dtsi +++ b/arch/arm/dts/tegra114.dtsi @@ -1,53 +1,222 @@ #include <dt-bindings/clock/tegra114-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra114-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" / { compatible = "nvidia,tegra114"; + interrupt-parent = <&lic>; - tegra_car: clock { + host1x@50000000 { + compatible = "nvidia,tegra114-host1x", "simple-bus"; + reg = <0x50000000 0x00028000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA114_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x01000000>; + + gr2d@54140000 { + compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; + }; + + gr3d@54180000 { + compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; + }; + + dc@54200000 { + compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DISP1>, + <&tegra_car TEGRA114_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DC>; + + nvidia,head = <0>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DISP2>, + <&tegra_car TEGRA114_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DCB>; + + nvidia,head = <1>; + + rgb { + status = "disabled"; + }; + }; + + hdmi@54280000 { + compatible = "nvidia,tegra114-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_HDMI>, + <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + dsi@54300000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIA>, + <&tegra_car TEGRA114_CLK_DSIALP>, + <&tegra_car TEGRA114_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + dsi@54400000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54400000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIB>, + <&tegra_car TEGRA114_CLK_DSIBLP>, + <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 82>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gic: interrupt-controller@50041000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x50041000 0x1000>, + <0x50042000 0x1000>, + <0x50044000 0x2000>, + <0x50046000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra114-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>, + <0x60004400 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + timer@60005000 { + compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; + reg = <0x60005000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_TIMER>; + }; + + tegra_car: clock@60006000 { compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; - apbdma: dma { - compatible = "nvidia,tegra114-apbdma", "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; + flow-controller@60007000 { + compatible = "nvidia,tegra114-flowctrl"; + reg = <0x60007000 0x1000>; + }; + + apbdma: dma@6000a000 { + compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_APBDMA>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; + }; + + ahb: ahb@6000c000 { + compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; + reg = <0x6000c000 0x150>; }; gpio: gpio@6000d000 { @@ -65,58 +234,31 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* + gpio-ranges = <&pinmux 0 0 246>; + */ }; - i2c@7000c000 { - compatible = "nvidia,tegra114-i2c"; - reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 12>; - status = "disabled"; - }; - - i2c@7000c400 { - compatible = "nvidia,tegra114-i2c"; - reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 54>; - status = "disabled"; - }; - - i2c@7000c500 { - compatible = "nvidia,tegra114-i2c"; - reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 67>; - status = "disabled"; + apbmisc@70000800 { + compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ }; - i2c@7000c700 { - compatible = "nvidia,tegra114-i2c"; - reg = <0x7000c700 0x100>; - interrupts = <0 120 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 103>; - status = "disabled"; - }; - - i2c@7000d000 { - compatible = "nvidia,tegra114-i2c"; - reg = <0x7000d000 0x100>; - interrupts = <0 53 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 47>; - status = "disabled"; + pinmux: pinmux@70000868 { + compatible = "nvidia,tegra114-pinmux"; + reg = <0x70000868 0x148 /* Pad control registers */ + 0x70003000 0x40c>; /* Mux registers */ }; + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the compatible is + * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart". + */ uarta: serial@70006000 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; @@ -169,134 +311,477 @@ status = "disabled"; }; + pwm: pwm@7000a000 { + compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA114_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + status = "disabled"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&tegra_car 103>; + reset-names = "i2c"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_I2C5>; + clock-names = "div-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi@7000d400 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; - nvidia,dma-request-selector = <&apbdma 15>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_SBC1>; + clock-names = "spi"; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; status = "disabled"; - /* PERIPH_ID_SBC1, PLLP_OUT0 */ - clocks = <&tegra_car 41>; }; spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_SBC2>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; - /* PERIPH_ID_SBC2, PLLP_OUT0 */ - clocks = <&tegra_car 44>; }; spi@7000d800 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d800 0x200>; - interrupts = <0 83 0x04>; - nvidia,dma-request-selector = <&apbdma 17>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_SBC3>; + clock-names = "spi"; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; status = "disabled"; - /* PERIPH_ID_SBC3, PLLP_OUT0 */ - clocks = <&tegra_car 46>; }; spi@7000da00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; - nvidia,dma-request-selector = <&apbdma 18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_SBC4>; + clock-names = "spi"; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; status = "disabled"; - /* PERIPH_ID_SBC4, PLLP_OUT0 */ - clocks = <&tegra_car 68>; }; spi@7000dc00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000dc00 0x200>; - interrupts = <0 94 0x04>; - nvidia,dma-request-selector = <&apbdma 27>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_SBC5>; + clock-names = "spi"; + resets = <&tegra_car 104>; + reset-names = "spi"; + dmas = <&apbdma 27>, <&apbdma 27>; + dma-names = "rx", "tx"; status = "disabled"; - /* PERIPH_ID_SBC5, PLLP_OUT0 */ - clocks = <&tegra_car 104>; }; spi@7000de00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000de00 0x200>; - interrupts = <0 79 0x04>; - nvidia,dma-request-selector = <&apbdma 28>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&tegra_car TEGRA114_CLK_SBC6>; + clock-names = "spi"; + resets = <&tegra_car 105>; + reset-names = "spi"; + dmas = <&apbdma 28>, <&apbdma 28>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + rtc@7000e000 { + compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_RTC>; + }; + + kbc@7000e200 { + compatible = "nvidia,tegra114-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_KBC>; + resets = <&tegra_car 36>; + reset-names = "kbc"; status = "disabled"; - /* PERIPH_ID_SBC6, PLLP_OUT0 */ - clocks = <&tegra_car 105>; + }; + + pmc@7000e400 { + compatible = "nvidia,tegra114-pmc"; + reg = <0x7000e400 0x400>; + clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + }; + + fuse@7000f800 { + compatible = "nvidia,tegra114-efuse"; + reg = <0x7000f800 0x400>; + clocks = <&tegra_car TEGRA114_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + mc: memory-controller@70019000 { + compatible = "nvidia,tegra114-mc"; + reg = <0x70019000 0x1000>; + clocks = <&tegra_car TEGRA114_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + + ahub@70080000 { + compatible = "nvidia,tegra114-ahub"; + reg = <0x70080000 0x200>, + <0x70080200 0x100>, + <0x70081000 0x200>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>, + <&tegra_car TEGRA114_CLK_APBIF>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, /* d_audio */ + <&tegra_car 107>, /* apbif */ + <&tegra_car 30>, /* i2s0 */ + <&tegra_car 11>, /* i2s1 */ + <&tegra_car 18>, /* i2s2 */ + <&tegra_car 101>, /* i2s3 */ + <&tegra_car 102>, /* i2s4 */ + <&tegra_car 108>, /* dam0 */ + <&tegra_car 109>, /* dam1 */ + <&tegra_car 110>, /* dam2 */ + <&tegra_car 10>, /* spdif */ + <&tegra_car 153>, /* amx */ + <&tegra_car 154>; /* adx */ + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif", "amx", "adx"; + dmas = <&apbdma 1>, <&apbdma 1>, + <&apbdma 2>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 3>, + <&apbdma 4>, <&apbdma 4>, + <&apbdma 6>, <&apbdma 6>, + <&apbdma 7>, <&apbdma 7>, + <&apbdma 12>, <&apbdma 12>, + <&apbdma 13>, <&apbdma 13>, + <&apbdma 14>, <&apbdma 14>, + <&apbdma 29>, <&apbdma 29>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", + "rx3", "tx3", "rx4", "tx4", "rx5", "tx5", + "rx6", "tx6", "rx7", "tx7", "rx8", "tx8", + "rx9", "tx9"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70080300 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA114_CLK_I2S0>; + resets = <&tegra_car 30>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s1: i2s@70080400 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080400 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA114_CLK_I2S1>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s2: i2s@70080500 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080500 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA114_CLK_I2S2>; + resets = <&tegra_car 18>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s3: i2s@70080600 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080600 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA114_CLK_I2S3>; + resets = <&tegra_car 101>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s4: i2s@70080700 { + compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s"; + reg = <0x70080700 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA114_CLK_I2S4>; + resets = <&tegra_car 102>; + reset-names = "i2s"; + status = "disabled"; + }; + }; + + mipi: mipi@700e3000 { + compatible = "nvidia,tegra114-mipi"; + reg = <0x700e3000 0x100>; + clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>; + #nvidia,mipi-calibrate-cells = <1>; }; sdhci@78000000 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; - status = "disable"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; - status = "disable"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC2>; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; - status = "disable"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC3>; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; - status = "disable"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_SDMMC4>; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disabled"; }; usb@7d000000 { - compatible = "nvidia,tegra114-ehci"; + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d000000 0x4000>; - interrupts = <52>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; - clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */ + clocks = <&tegra_car TEGRA114_CLK_USBD>; + resets = <&tegra_car 22>; + reset-names = "usb"; + nvidia,phy = <&phy1>; status = "disabled"; }; - usb@7d004000 { - compatible = "nvidia,tegra114-ehci"; - reg = <0x7d004000 0x4000>; - interrupts = <53>; - phy_type = "hsic"; - clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */ + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USBD>, + <&tegra_car TEGRA114_CLK_PLL_U>, + <&tegra_car TEGRA114_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra114-ehci"; + compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d008000 0x4000>; - interrupts = <129>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA114_CLK_USB3>; + resets = <&tegra_car 59>; + reset-names = "usb"; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */ + clocks = <&tegra_car TEGRA114_CLK_USB3>, + <&tegra_car TEGRA114_CLK_PLL_U>, + <&tegra_car TEGRA114_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; status = "disabled"; }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; }; diff --git a/arch/arm/dts/tegra124-cei-tk1-som.dts b/arch/arm/dts/tegra124-cei-tk1-som.dts index d22c0cabec..c4d4f9d89f 100644 --- a/arch/arm/dts/tegra124-cei-tk1-som.dts +++ b/arch/arm/dts/tegra124-cei-tk1-som.dts @@ -16,8 +16,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@700b0600"; - sdhci1 = "/sdhci@700b0400"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; usb0 = "/usb@7d000000"; diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts index 21ed1aef0b..f1db952355 100644 --- a/arch/arm/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/dts/tegra124-jetson-tk1.dts @@ -16,8 +16,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@700b0600"; - sdhci1 = "/sdhci@700b0400"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; usb0 = "/usb@7d000000"; @@ -312,6 +312,7 @@ sdhci@700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; usb@7d000000 { diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts index 20e0be30e9..3758395c6f 100644 --- a/arch/arm/dts/tegra124-nyan-big.dts +++ b/arch/arm/dts/tegra124-nyan-big.dts @@ -15,10 +15,10 @@ i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; i2c5 = "/i2c@7000d100"; - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; - sdhci0 = "/sdhci@700b0600"; - sdhci1 = "/sdhci@700b0400"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; usb0 = "/usb@7d000000"; @@ -58,7 +58,7 @@ ddc-i2c-bus = <&dpaux>; }; - sdhci@0,700b0400 { /* SD Card on this bus */ + sdhci@700b0400 { /* SD Card on this bus */ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; }; @@ -69,7 +69,7 @@ nvidia,model = "GoogleNyanBig"; }; - pinmux@0,70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; diff --git a/arch/arm/dts/tegra124-nyan.dtsi b/arch/arm/dts/tegra124-nyan.dtsi index 1b6931fae8..51895e4816 100644 --- a/arch/arm/dts/tegra124-nyan.dtsi +++ b/arch/arm/dts/tegra124-nyan.dtsi @@ -3,8 +3,8 @@ / { aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -424,10 +424,12 @@ usb@7d004000 { /* Internal webcam. */ status = "okay"; + phy_type = "hsic"; }; usb-phy@7d004000 { status = "okay"; + phy_type = "hsic"; vbus-supply = <&vdd_run_cam>; }; diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts index 9de86c0143..add9244e68 100644 --- a/arch/arm/dts/tegra124-venice2.dts +++ b/arch/arm/dts/tegra124-venice2.dts @@ -17,8 +17,8 @@ i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; i2c5 = "/i2c@7000d100"; - sdhci0 = "/sdhci@700b0600"; - sdhci1 = "/sdhci@700b0400"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0400"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000da00"; usb0 = "/usb@7d000000"; @@ -81,6 +81,7 @@ sdhci@700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; usb@7d000000 { diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi index 275a509f75..83d6348047 100644 --- a/arch/arm/dts/tegra124.dtsi +++ b/arch/arm/dts/tegra124.dtsi @@ -196,13 +196,18 @@ lic: interrupt-controller@60004000 { compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr"; + reg = <0x0 0x60004000 0x0 0x100>, + <0x0 0x60004100 0x0 0x100>, + <0x0 0x60004200 0x0 0x100>, + <0x0 0x60004300 0x0 0x100>, + <0x0 0x60004400 0x0 0x100>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; }; timer@60005000 { - compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; + compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x60005000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, @@ -316,7 +321,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable - * the APB DMA based serial driver, the comptible is + * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ uarta: serial@70006000 { @@ -399,10 +404,15 @@ i2c@7000c400 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 54>; + clocks = <&tegra_car TEGRA124_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -631,6 +641,41 @@ status = "disabled"; }; + usb@70090000 { + compatible = "nvidia,tegra124-xusb"; + reg = <0x70090000 0x8000>, + <0x70098000 0x1000>, + <0x70099000 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", + "xusb_falcon_src", "xusb_ss", + "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, + <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + status = "disabled"; + }; + padctl: padctl@7009f000 { compatible = "nvidia,tegra124-xusb-padctl"; reg = <0x7009f000 0x1000>; @@ -820,7 +865,7 @@ }; usb@7d000000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; @@ -857,10 +902,10 @@ }; usb@7d004000 { - compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci"; + compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d004000 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - phy_type = "hsic"; + phy_type = "utmi"; clocks = <&tegra_car TEGRA124_CLK_USB2>; resets = <&tegra_car 58>; reset-names = "usb"; diff --git a/arch/arm/dts/tegra186-p2771-0000.dtsi b/arch/arm/dts/tegra186-p2771-0000.dtsi index d867674fd0..6e071082f9 100644 --- a/arch/arm/dts/tegra186-p2771-0000.dtsi +++ b/arch/arm/dts/tegra186-p2771-0000.dtsi @@ -9,8 +9,8 @@ }; aliases { - sdhci0 = "/sdhci@3460000"; - sdhci1 = "/sdhci@3400000"; + mmc0 = "/sdhci@3460000"; + mmc1 = "/sdhci@3400000"; i2c0 = "/bpmp/i2c"; i2c1 = "/i2c@3160000"; i2c2 = "/i2c@c240000"; @@ -50,6 +50,7 @@ sdhci@3460000 { status = "okay"; bus-width = <8>; + non-removable; }; i2c@c240000 { diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts index 2cf24d3ee7..777f63e5bd 100644 --- a/arch/arm/dts/tegra20-colibri.dts +++ b/arch/arm/dts/tegra20-colibri.dts @@ -17,7 +17,7 @@ usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; usb2 = "/usb@c5004000"; - sdhci0 = "/sdhci@c8000600"; + mmc0 = "/sdhci@c8000600"; }; host1x@50000000 { @@ -39,7 +39,8 @@ usb@c5004000 { statuc = "okay"; /* VBUS_LAN */ - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts index 8e9fe5ad3f..dcbde7c2ed 100644 --- a/arch/arm/dts/tegra20-harmony.dts +++ b/arch/arm/dts/tegra20-harmony.dts @@ -15,10 +15,11 @@ rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; serial0 = &uartd; - usb0 = "/usb@c5008000"; + usb0 = "/usb@c5000000"; usb1 = "/usb@c5004000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000200"; + usb2 = "/usb@c5008000"; + mmc0 = "/sdhci@c8000600"; + mmc1 = "/sdhci@c8000200"; }; memory { @@ -626,7 +627,8 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) 0>; + nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) + GPIO_ACTIVE_LOW>; }; usb-phy@c5004000 { diff --git a/arch/arm/dts/tegra20-medcom-wide.dts b/arch/arm/dts/tegra20-medcom-wide.dts index 3d37257189..1c79d75746 100644 --- a/arch/arm/dts/tegra20-medcom-wide.dts +++ b/arch/arm/dts/tegra20-medcom-wide.dts @@ -12,7 +12,7 @@ aliases { usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; + mmc0 = "/sdhci@c8000600"; }; memory { diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts index 5c7e80558d..cf6bd70189 100644 --- a/arch/arm/dts/tegra20-paz00.dts +++ b/arch/arm/dts/tegra20-paz00.dts @@ -12,8 +12,8 @@ aliases { usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000000"; + mmc0 = "/sdhci@c8000600"; + mmc1 = "/sdhci@c8000000"; }; memory { @@ -50,6 +50,7 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { diff --git a/arch/arm/dts/tegra20-plutux.dts b/arch/arm/dts/tegra20-plutux.dts index 7f57f1d4b5..1b642be992 100644 --- a/arch/arm/dts/tegra20-plutux.dts +++ b/arch/arm/dts/tegra20-plutux.dts @@ -12,7 +12,7 @@ aliases { usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; + mmc0 = "/sdhci@c8000600"; }; memory { diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts index 0a454f98cf..341c7f3583 100644 --- a/arch/arm/dts/tegra20-seaboard.dts +++ b/arch/arm/dts/tegra20-seaboard.dts @@ -9,8 +9,9 @@ aliases { /* This defines the order of our ports */ - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; + usb0 = "/usb@c5000000"; + usb1 = "/usb@c5004000"; + usb2 = "/usb@c5008000"; i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c400"; @@ -18,8 +19,8 @@ rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; serial0 = &uartd; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; + mmc0 = "/sdhci@c8000600"; + mmc1 = "/sdhci@c8000400"; }; chosen { @@ -783,7 +784,7 @@ }; usb@c5004000 { - status = "disabled"; + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/dts/tegra20-tec.dts b/arch/arm/dts/tegra20-tec.dts index 4f68077faf..4733c81349 100644 --- a/arch/arm/dts/tegra20-tec.dts +++ b/arch/arm/dts/tegra20-tec.dts @@ -12,7 +12,7 @@ aliases { usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; + mmc0 = "/sdhci@c8000600"; }; memory { diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts index db13ff9651..7fb7dd0b58 100644 --- a/arch/arm/dts/tegra20-trimslice.dts +++ b/arch/arm/dts/tegra20-trimslice.dts @@ -11,10 +11,9 @@ }; aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000000"; + usb0 = "/usb@c5000000"; + mmc0 = "/sdhci@c8000600"; + mmc1 = "/sdhci@c8000000"; spi0 = "/spi@7000c380"; }; diff --git a/arch/arm/dts/tegra20-ventana.dts b/arch/arm/dts/tegra20-ventana.dts index 143e964459..85cd1e39bd 100644 --- a/arch/arm/dts/tegra20-ventana.dts +++ b/arch/arm/dts/tegra20-ventana.dts @@ -15,9 +15,11 @@ rtc0 = "/i2c@7000d000/tps6586x@34"; rtc1 = "/rtc@7000e000"; serial0 = &uartd; - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; + usb0 = "/usb@c5000000"; + usb1 = "/usb@c5004000"; + usb2 = "/usb@c5008000"; + mmc0 = "/sdhci@c8000600"; + mmc1 = "/sdhci@c8000400"; }; memory { diff --git a/arch/arm/dts/tegra20-whistler.dts b/arch/arm/dts/tegra20-whistler.dts index 358c5824f7..447874674d 100644 --- a/arch/arm/dts/tegra20-whistler.dts +++ b/arch/arm/dts/tegra20-whistler.dts @@ -13,8 +13,8 @@ aliases { i2c0 = "/i2c@7000d000"; usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; + mmc0 = "/sdhci@c8000600"; + mmc1 = "/sdhci@c8000400"; }; memory { @@ -58,6 +58,7 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index 31223e4fc9..84bb1b0215 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -147,7 +147,7 @@ interrupt-parent = <&intc>; reg = <0x50040600 0x20>; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; clocks = <&tegra_car TEGRA20_CLK_TWD>; }; @@ -311,7 +311,7 @@ * driver and APB DMA based serial driver for higher baudrate * and performace. To enable the 8250 based driver, the compatible * is "nvidia,tegra20-uart" and to enable the APB DMA based serial - * driver, the comptible is "nvidia,tegra20-hsuart". + * driver, the compatible is "nvidia,tegra20-hsuart". */ uarta: serial@70006000 { compatible = "nvidia,tegra20-uart"; diff --git a/arch/arm/dts/tegra210-e2220-1170.dts b/arch/arm/dts/tegra210-e2220-1170.dts index 75efbba106..70cd72b561 100644 --- a/arch/arm/dts/tegra210-e2220-1170.dts +++ b/arch/arm/dts/tegra210-e2220-1170.dts @@ -11,34 +11,35 @@ }; aliases { - i2c0 = "/i2c@0,7000d000"; - sdhci0 = "/sdhci@0,700b0600"; - sdhci1 = "/sdhci@0,700b0000"; - usb0 = "/usb@0,7d000000"; + i2c0 = "/i2c@7000d000"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0000"; + usb0 = "/usb@7d000000"; }; memory { reg = <0x0 0x80000000 0x0 0xc0000000>; }; - sdhci@0,700b0000 { + sdhci@700b0000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; dr_mode = "peripheral"; }; diff --git a/arch/arm/dts/tegra210-p2371-0000.dts b/arch/arm/dts/tegra210-p2371-0000.dts index 10172a23ad..d9612962bd 100644 --- a/arch/arm/dts/tegra210-p2371-0000.dts +++ b/arch/arm/dts/tegra210-p2371-0000.dts @@ -11,34 +11,35 @@ }; aliases { - i2c0 = "/i2c@0,7000d000"; - sdhci0 = "/sdhci@0,700b0600"; - sdhci1 = "/sdhci@0,700b0000"; - usb0 = "/usb@0,7d000000"; + i2c0 = "/i2c@7000d000"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0000"; + usb0 = "/usb@7d000000"; }; memory { reg = <0x0 0x80000000 0x0 0xc0000000>; }; - sdhci@0,700b0000 { + sdhci@700b0000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; dr_mode = "otg"; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts index bf35497d83..0dc06a4721 100644 --- a/arch/arm/dts/tegra210-p2371-2180.dts +++ b/arch/arm/dts/tegra210-p2371-2180.dts @@ -11,17 +11,17 @@ }; aliases { - i2c0 = "/i2c@0,7000d000"; - sdhci0 = "/sdhci@0,700b0600"; - sdhci1 = "/sdhci@0,700b0000"; - usb0 = "/usb@0,7d000000"; + i2c0 = "/i2c@7000d000"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0000"; + usb0 = "/usb@7d000000"; }; memory { reg = <0x0 0x80000000 0x0 0xc0000000>; }; - pcie-controller@0,01003000 { + pcie-controller@01003000 { status = "okay"; pci@1,0 { @@ -33,7 +33,7 @@ }; }; - padctl@0,7009f000 { + padctl@7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; @@ -71,7 +71,7 @@ }; }; - sdhci@0,700b0000 { + sdhci@700b0000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; @@ -79,17 +79,18 @@ bus-width = <4>; }; - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; dr_mode = "otg"; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/dts/tegra210-p2571.dts b/arch/arm/dts/tegra210-p2571.dts index de35bba44b..2afcde5ca2 100644 --- a/arch/arm/dts/tegra210-p2571.dts +++ b/arch/arm/dts/tegra210-p2571.dts @@ -11,82 +11,83 @@ }; aliases { - i2c0 = "/i2c@0,7000d000"; - i2c1 = "/i2c@0,7000c000"; - i2c2 = "/i2c@0,7000c400"; - i2c3 = "/i2c@0,7000c500"; - i2c4 = "/i2c@0,7000c700"; - i2c5 = "/i2c@0,7000d100"; - sdhci0 = "/sdhci@0,700b0600"; - sdhci1 = "/sdhci@0,700b0000"; - spi0 = "/spi@0,7000d400"; - spi1 = "/spi@0,7000da00"; - spi2 = "/spi@0,70410000"; - usb0 = "/usb@0,7d000000"; + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + i2c5 = "/i2c@7000d100"; + mmc0 = "/sdhci@700b0600"; + mmc1 = "/sdhci@700b0000"; + spi0 = "/spi@7000d400"; + spi1 = "/spi@7000da00"; + spi2 = "/spi@70410000"; + usb0 = "/usb@7d000000"; }; memory { reg = <0x0 0x80000000 0x0 0xc0000000>; }; - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000c700 { + i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; }; - i2c@0,7000d100 { + i2c@7000d100 { status = "okay"; clock-frequency = <400000>; }; - spi@0,7000d400 { + spi@7000d400 { status = "okay"; spi-max-frequency = <25000000>; }; - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; }; - spi@0,70410000 { + spi@70410000 { status = "okay"; spi-max-frequency = <24000000>; }; - sdhci@0,700b0000 { + sdhci@700b0000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; }; - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; dr_mode = "otg"; }; diff --git a/arch/arm/dts/tegra210.dtsi b/arch/arm/dts/tegra210.dtsi index a8c2f1994f..229fed0452 100644 --- a/arch/arm/dts/tegra210.dtsi +++ b/arch/arm/dts/tegra210.dtsi @@ -1,18 +1,17 @@ #include <dt-bindings/clock/tegra210-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra210-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra210"; - interrupt-parent = <&gic>; + interrupt-parent = <&lic>; #address-cells = <2>; #size-cells = <2>; - pcie-controller@0,01003000 { + pcie-controller@01003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -78,7 +77,202 @@ }; }; - gic: interrupt-controller@0,50041000 { + host1x@50000000 { + compatible = "nvidia,tegra210-host1x", "simple-bus"; + reg = <0x0 0x50000000 0x0 0x00034000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA210_CLK_HOST1X>; + clock-names = "host1x"; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>; + + dpaux1: dpaux@54040000 { + compatible = "nvidia,tegra210-dpaux"; + reg = <0x0 0x54040000 0x0 0x00040000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DPAUX1>, + <&tegra_car TEGRA210_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 207>; + reset-names = "dpaux"; + status = "disabled"; + }; + + vi@54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x0 0x54080000 0x0 0x00040000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + tsec@54100000 { + compatible = "nvidia,tegra210-tsec"; + reg = <0x0 0x54100000 0x0 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra210-dc"; + reg = <0x0 0x54200000 0x0 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DISP1>, + <&tegra_car TEGRA210_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DC>; + + nvidia,head = <0>; + }; + + dc@54240000 { + compatible = "nvidia,tegra210-dc"; + reg = <0x0 0x54240000 0x0 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DISP2>, + <&tegra_car TEGRA210_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DCB>; + + nvidia,head = <1>; + }; + + dsi@54300000 { + compatible = "nvidia,tegra210-dsi"; + reg = <0x0 0x54300000 0x0 0x00040000>; + clocks = <&tegra_car TEGRA210_CLK_DSIA>, + <&tegra_car TEGRA210_CLK_DSIALP>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */ + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + vic@54340000 { + compatible = "nvidia,tegra210-vic"; + reg = <0x0 0x54340000 0x0 0x00040000>; + status = "disabled"; + }; + + nvjpg@54380000 { + compatible = "nvidia,tegra210-nvjpg"; + reg = <0x0 0x54380000 0x0 0x00040000>; + status = "disabled"; + }; + + dsi@54400000 { + compatible = "nvidia,tegra210-dsi"; + reg = <0x0 0x54400000 0x0 0x00040000>; + clocks = <&tegra_car TEGRA210_CLK_DSIB>, + <&tegra_car TEGRA210_CLK_DSIBLP>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 82>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */ + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + nvdec@54480000 { + compatible = "nvidia,tegra210-nvdec"; + reg = <0x0 0x54480000 0x0 0x00040000>; + status = "disabled"; + }; + + nvenc@544c0000 { + compatible = "nvidia,tegra210-nvenc"; + reg = <0x0 0x544c0000 0x0 0x00040000>; + status = "disabled"; + }; + + tsec@54500000 { + compatible = "nvidia,tegra210-tsec"; + reg = <0x0 0x54500000 0x0 0x00040000>; + status = "disabled"; + }; + + sor@54540000 { + compatible = "nvidia,tegra210-sor"; + reg = <0x0 0x54540000 0x0 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_DP>, + <&tegra_car TEGRA210_CLK_SOR_SAFE>; + clock-names = "sor", "parent", "dp", "safe"; + resets = <&tegra_car 182>; + reset-names = "sor"; + status = "disabled"; + }; + + sor@54580000 { + compatible = "nvidia,tegra210-sor1"; + reg = <0x0 0x54580000 0x0 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SOR1>, + <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_DP>, + <&tegra_car TEGRA210_CLK_SOR_SAFE>; + clock-names = "sor", "parent", "dp", "safe"; + resets = <&tegra_car 183>; + reset-names = "sor"; + status = "disabled"; + }; + + dpaux: dpaux@545c0000 { + compatible = "nvidia,tegra124-dpaux"; + reg = <0x0 0x545c0000 0x0 0x00040000>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_DPAUX>, + <&tegra_car TEGRA210_CLK_PLL_DP>; + clock-names = "dpaux", "parent"; + resets = <&tegra_car 181>; + reset-names = "dpaux"; + status = "disabled"; + }; + + isp@54600000 { + compatible = "nvidia,tegra210-isp"; + reg = <0x0 0x54600000 0x0 0x00040000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + isp@54680000 { + compatible = "nvidia,tegra210-isp"; + reg = <0x0 0x54680000 0x0 0x00040000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c@546c0000 { + compatible = "nvidia,tegra210-i2c-vi"; + reg = <0x0 0x546c0000 0x0 0x00040000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@50041000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; interrupt-controller; @@ -91,14 +285,64 @@ interrupt-parent = <&gic>; }; - tegra_car: clock@0,60006000 { + gpu@57000000 { + compatible = "nvidia,gm20b"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA210_CLK_GPU>, + <&tegra_car TEGRA210_CLK_PLL_P_OUT5>, + <&tegra_car TEGRA210_CLK_PLL_G_REF>; + clock-names = "gpu", "pwr", "ref"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + + iommus = <&mc TEGRA_SWGROUP_GPU>; + + status = "disabled"; + }; + + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra210-ictlr"; + reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */ + <0x0 0x60004100 0x0 0x40>, /* secondary controller */ + <0x0 0x60004200 0x0 0x40>, /* tertiary controller */ + <0x0 0x60004300 0x0 0x40>, /* quaternary controller */ + <0x0 0x60004400 0x0 0x40>, /* quinary controller */ + <0x0 0x60004500 0x0 0x40>; /* senary controller */ + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; + + timer@60005000 { + compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer"; + reg = <0x0 0x60005000 0x0 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_TIMER>; + clock-names = "timer"; + }; + + tegra_car: clock@60006000 { compatible = "nvidia,tegra210-car"; reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - gpio: gpio@0,6000d000 { + flow-controller@60007000 { + compatible = "nvidia,tegra210-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + + gpio: gpio@6000d000 { compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -115,169 +359,336 @@ interrupt-controller; }; - i2c@0,7000c000 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; - reg = <0x0 0x7000c000 0x0 0x100>; - interrupts = <0 38 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 12>; - status = "disabled"; + apbdma: dma@60020000 { + compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma"; + reg = <0x0 0x60020000 0x0 0x1400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_APBDMA>; + clock-names = "dma"; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; }; - i2c@0,7000c400 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; - reg = <0x0 0x7000c400 0x0 0x100>; - interrupts = <0 84 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 54>; - status = "disabled"; + apbmisc@70000800 { + compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ + <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; - i2c@0,7000c500 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; - reg = <0x0 0x7000c500 0x0 0x100>; - interrupts = <0 92 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 67>; - status = "disabled"; - }; - - i2c@0,7000c700 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; - reg = <0x0 0x7000c700 0x0 0x100>; - interrupts = <0 120 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 103>; - status = "disabled"; + pinmux: pinmux@700008d4 { + compatible = "nvidia,tegra210-pinmux"; + reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */ + <0x0 0x70003000 0x0 0x294>; /* Mux registers */ }; - i2c@0,7000d000 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; - reg = <0x0 0x7000d000 0x0 0x100>; - interrupts = <0 53 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 47>; - status = "disabled"; - }; - - i2c@0,7000d100 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; - reg = <0x0 0x7000d100 0x0 0x100>; - interrupts = <0 53 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 47>; - status = "disabled"; - }; - - uarta: serial@0,70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performance. To enable the 8250 based driver, the compatible + * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the compatible is + * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006000 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTA>; + clock-names = "serial"; resets = <&tegra_car 6>; reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; - uartb: serial@0,70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006040 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTB>; + clock-names = "serial"; resets = <&tegra_car 7>; reset-names = "serial"; + dmas = <&apbdma 9>, <&apbdma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; - uartc: serial@0,70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006200 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTC>; + clock-names = "serial"; resets = <&tegra_car 55>; reset-names = "serial"; + dmas = <&apbdma 10>, <&apbdma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; - uartd: serial@0,70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006300 0x0 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTD>; + clock-names = "serial"; resets = <&tegra_car 65>; reset-names = "serial"; + dmas = <&apbdma 19>, <&apbdma 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm"; + reg = <0x0 0x7000a000 0x0 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA210_CLK_PWM>; + clock-names = "pwm"; + resets = <&tegra_car 17>; + reset-names = "pwm"; status = "disabled"; }; - spi@0,7000d400 { + i2c@7000c000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c000 0x0 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c400 0x0 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c500 0x0 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000c700 0x0 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&tegra_car 103>; + reset-names = "i2c"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d000 0x0 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C5>; + clock-names = "div-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d100 { + compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x7000d100 0x0 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&tegra_car 166>; + reset-names = "i2c"; + dmas = <&apbdma 30>, <&apbdma 30>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d400 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d400 0x0 0x200>; - interrupts = <0 59 0x04>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&tegra_car TEGRA210_CLK_SBC1>; + clock-names = "spi"; resets = <&tegra_car 41>; reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; status = "disabled"; }; - spi@0,7000d600 { + spi@7000d600 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d600 0x0 0x200>; - interrupts = <0 82 0x04>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&tegra_car TEGRA210_CLK_SBC2>; + clock-names = "spi"; resets = <&tegra_car 44>; reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; - spi@0,7000d800 { + spi@7000d800 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d800 0x0 0x200>; - interrupts = <0 83 0x04>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&tegra_car TEGRA210_CLK_SBC3>; + clock-names = "spi"; resets = <&tegra_car 46>; reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; status = "disabled"; }; - spi@0,7000da00 { + spi@7000da00 { compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000da00 0x0 0x200>; - interrupts = <0 93 0x04>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&tegra_car TEGRA210_CLK_SBC4>; + clock-names = "spi"; resets = <&tegra_car 68>; reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; status = "disabled"; }; - spi@0,70410000 { - compatible = "nvidia,tegra210-qspi"; - reg = <0x0 0x70410000 0x0 0x1000>; - interrupts = <0 10 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 211>; + rtc@7000e000 { + compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; + reg = <0x0 0x7000e000 0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_RTC>; + clock-names = "rtc"; + }; + + pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x0 0x7000e400 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + }; + + fuse@7000f800 { + compatible = "nvidia,tegra210-efuse"; + reg = <0x0 0x7000f800 0x0 0x400>; + clocks = <&tegra_car TEGRA210_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + mc: memory-controller@70019000 { + compatible = "nvidia,tegra210-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car TEGRA210_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + + hda@70030000 { + compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda"; + reg = <0x0 0x70030000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_HDA>, + <&tegra_car TEGRA210_CLK_HDA2HDMI>, + <&tegra_car TEGRA210_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; status = "disabled"; }; - padctl: padctl@0,7009f000 { + padctl: padctl@7009f000 { compatible = "nvidia,tegra210-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; resets = <&tegra_car 142>; @@ -285,65 +696,187 @@ #phy-cells = <1>; }; - sdhci@0,700b0000 { - compatible = "nvidia,tegra210-sdhci"; + sdhci@700b0000 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; - interrupts = <0 14 0x04>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; + clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; status = "disabled"; }; - sdhci@0,700b0200 { - compatible = "nvidia,tegra210-sdhci"; + sdhci@700b0200 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; - interrupts = <0 15 0x04>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC2>; + clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; status = "disabled"; }; - sdhci@0,700b0400 { - compatible = "nvidia,tegra210-sdhci"; + sdhci@700b0400 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; - interrupts = <0 19 0x04>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC3>; + clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; status = "disabled"; }; - sdhci@0,700b0600 { - compatible = "nvidia,tegra210-sdhci"; + sdhci@700b0600 { + compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; - interrupts = <0 31 0x04>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC4>; + clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; status = "disabled"; }; - usb@0,7d000000 { - compatible = "nvidia,tegra210-ehci"; + mipi: mipi@700e3000 { + compatible = "nvidia,tegra210-mipi"; + reg = <0x0 0x700e3000 0x0 0x100>; + clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>; + clock-names = "mipi-cal"; + #nvidia,mipi-calibrate-cells = <1>; + }; + + spi@70410000 { + compatible = "nvidia,tegra210-qspi"; + reg = <0x0 0x70410000 0x0 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_QSPI>; + clock-names = "qspi"; + resets = <&tegra_car 211>; + reset-names = "qspi"; + dmas = <&apbdma 5>, <&apbdma 5>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usb@7d000000 { + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; - interrupts = <0 20 0x04>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA210_CLK_USBD>; + clock-names = "usb"; resets = <&tegra_car 22>; reset-names = "usb"; + nvidia,phy = <&phy1>; status = "disabled"; }; - usb@0,7d004000 { - compatible = "nvidia,tegra210-ehci"; + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d000000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USBD>, + <&tegra_car TEGRA210_CLK_PLL_U>, + <&tegra_car TEGRA210_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; + status = "disabled"; + }; + + usb@7d004000 { + compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; - interrupts = < 53 >; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; clocks = <&tegra_car TEGRA210_CLK_USB2>; + clock-names = "usb"; resets = <&tegra_car 58>; reset-names = "usb"; + nvidia,phy = <&phy2>; status = "disabled"; }; + + phy2: usb-phy@7d004000 { + compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy"; + reg = <0x0 0x7d004000 0x0 0x4000>, + <0x0 0x7d000000 0x0 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA210_CLK_USB2>, + <&tegra_car TEGRA210_CLK_PLL_U>, + <&tegra_car TEGRA210_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <9>; + nvidia,xcvr-lsfslew = <0>; + nvidia,xcvr-lsrslew = <3>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,xcvr-hsslew = <12>; + status = "disabled"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; }; diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts index 3e0545c8be..f83f09475e 100644 --- a/arch/arm/dts/tegra30-apalis.dts +++ b/arch/arm/dts/tegra30-apalis.dts @@ -15,9 +15,9 @@ i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c500"; i2c3 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; - sdhci2 = "/sdhci@78000000"; + mmc0 = "/sdhci@78000600"; + mmc1 = "/sdhci@78000400"; + mmc2 = "/sdhci@78000000"; spi0 = "/spi@7000d400"; spi1 = "/spi@7000dc00"; spi2 = "/spi@7000de00"; @@ -277,7 +277,6 @@ status = "okay"; /* USBH_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; - phy_type = "utmi"; }; /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ @@ -287,6 +286,26 @@ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts index ae836363ab..4a32fcf44a 100644 --- a/arch/arm/dts/tegra30-beaver.dts +++ b/arch/arm/dts/tegra30-beaver.dts @@ -16,8 +16,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000000"; + mmc0 = "/sdhci@78000600"; + mmc1 = "/sdhci@78000000"; spi0 = "/spi@7000da00"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d008000"; @@ -205,6 +205,7 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; }; usb@7d000000 { @@ -218,6 +219,19 @@ status = "okay"; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts index 23ca141df2..70fd916f1a 100644 --- a/arch/arm/dts/tegra30-cardhu.dts +++ b/arch/arm/dts/tegra30-cardhu.dts @@ -16,8 +16,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000000"; + mmc0 = "/sdhci@78000600"; + mmc1 = "/sdhci@78000000"; spi0 = "/spi@7000da00"; usb0 = "/usb@7d008000"; }; @@ -194,6 +194,7 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; }; usb@7d008000 { @@ -201,6 +202,19 @@ status = "okay"; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 487e1f6ae5..3cff2f62e6 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -14,8 +14,8 @@ i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000200"; + mmc0 = "/sdhci@78000600"; + mmc1 = "/sdhci@78000200"; spi0 = "/spi@7000d400"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d004000"; /* on module only, for ASIX */ @@ -84,7 +84,6 @@ status = "okay"; /* VBUS_LAN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; - phy_type = "utmi"; }; /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ @@ -93,4 +92,17 @@ /* USBH_PEN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/dts/tegra30-tamonten.dtsi b/arch/arm/dts/tegra30-tamonten.dtsi index 8eff627f3d..33da1754d3 100644 --- a/arch/arm/dts/tegra30-tamonten.dtsi +++ b/arch/arm/dts/tegra30-tamonten.dtsi @@ -18,9 +18,9 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000d000"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; - sdhci2 = "/sdhci@78000000"; + mmc0 = "/sdhci@78000600"; + mmc1 = "/sdhci@78000400"; + mmc2 = "/sdhci@78000000"; usb0 = "/usb@7d008000"; }; @@ -64,10 +64,23 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; }; usb@7d008000 { status = "okay"; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; }; diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi index 5ea7e347f3..5030065cbd 100644 --- a/arch/arm/dts/tegra30.dtsi +++ b/arch/arm/dts/tegra30.dtsi @@ -1,20 +1,14 @@ #include <dt-bindings/clock/tegra30-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra30-mc.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" / { compatible = "nvidia,tegra30"; - interrupt-parent = <&intc>; - - intc: interrupt-controller@50041000 { - compatible = "arm,cortex-a9-gic"; - reg = <0x50041000 0x1000 - 0x50040100 0x0100>; - interrupt-controller; - #interrupt-cells = <3>; - }; + interrupt-parent = <&lic>; pcie-controller@00003000 { compatible = "nvidia,tegra30-pcie"; @@ -24,7 +18,7 @@ 0x10000000 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */ - GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -39,15 +33,18 @@ 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */ 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */ 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x20000000 0x20000000 0 0x10000000 /* non-prefetchable memory */ - 0xc2000000 0 0x30000000 0x30000000 0 0x10000000>; /* prefetchable memory */ + 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */ + 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ clocks = <&tegra_car TEGRA30_CLK_PCIE>, <&tegra_car TEGRA30_CLK_AFI>, - <&tegra_car TEGRA30_CLK_PCIEX>, <&tegra_car TEGRA30_CLK_PLL_E>, <&tegra_car TEGRA30_CLK_CML0>; - clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml"; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; status = "disabled"; pci@1,0 { @@ -90,48 +87,251 @@ }; }; - tegra_car: clock { + host1x@50000000 { + compatible = "nvidia,tegra30-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA30_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe@54040000 { + compatible = "nvidia,tegra30-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_MPE>; + resets = <&tegra_car 60>; + reset-names = "mpe"; + }; + + vi@54080000 { + compatible = "nvidia,tegra30-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_VI>; + resets = <&tegra_car 20>; + reset-names = "vi"; + }; + + epp@540c0000 { + compatible = "nvidia,tegra30-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_EPP>; + resets = <&tegra_car 19>; + reset-names = "epp"; + }; + + isp@54100000 { + compatible = "nvidia,tegra30-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_ISP>; + resets = <&tegra_car 23>; + reset-names = "isp"; + }; + + gr2d@54140000 { + compatible = "nvidia,tegra30-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; + }; + + gr3d@54180000 { + compatible = "nvidia,tegra30-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA30_CLK_GR3D + &tegra_car TEGRA30_CLK_GR3D2>; + clock-names = "3d", "3d2"; + resets = <&tegra_car 24>, + <&tegra_car 98>; + reset-names = "3d", "3d2"; + }; + + dc@54200000 { + compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_DISP1>, + <&tegra_car TEGRA30_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DC>; + + nvidia,head = <0>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_DISP2>, + <&tegra_car TEGRA30_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + iommus = <&mc TEGRA_SWGROUP_DCB>; + + nvidia,head = <1>; + + rgb { + status = "disabled"; + }; + }; + + hdmi@54280000 { + compatible = "nvidia,tegra30-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_HDMI>, + <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + tvo@542c0000 { + compatible = "nvidia,tegra30-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TVO>; + status = "disabled"; + }; + + dsi@54300000 { + compatible = "nvidia,tegra30-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA30_CLK_DSIA>; + resets = <&tegra_car 48>; + reset-names = "dsi"; + status = "disabled"; + }; + }; + + timer@50040600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x50040600 0x20>; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&tegra_car TEGRA30_CLK_TWD>; + }; + + intc: interrupt-controller@50041000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x50041000 0x1000 + 0x50040100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; + + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + + lic: interrupt-controller@60004000 { + compatible = "nvidia,tegra30-ictlr"; + reg = <0x60004000 0x100>, + <0x60004100 0x50>, + <0x60004200 0x50>, + <0x60004300 0x50>, + <0x60004400 0x50>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; + + timer@60005000 { + compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer"; + reg = <0x60005000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_TIMER>; + }; + + tegra_car: clock@60006000 { compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; + }; + + flow-controller@60007000 { + compatible = "nvidia,tegra30-flowctrl"; + reg = <0x60007000 0x1000>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = <0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04>; - clocks = <&tegra_car 34>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_APBDMA>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; + }; + + ahb: ahb@6000c000 { + compatible = "nvidia,tegra30-ahb"; + reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */ }; gpio: gpio@6000d000 { @@ -149,63 +349,31 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* + gpio-ranges = <&pinmux 0 0 248>; + */ }; - i2c@7000c000 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 182>; - clock-names = "div-clk", "fast-clk"; - status = "disabled"; - }; - - i2c@7000c400 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000c400 0x100>; - interrupts = <0 84 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 54>, <&tegra_car 182>; - clock-names = "div-clk", "fast-clk"; - status = "disabled"; - }; - - i2c@7000c500 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000c500 0x100>; - interrupts = <0 92 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 67>, <&tegra_car 182>; - clock-names = "div-clk", "fast-clk"; - status = "disabled"; - }; - - i2c@7000c700 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000c700 0x100>; - interrupts = <0 120 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 103>, <&tegra_car 182>; - clock-names = "div-clk", "fast-clk"; - status = "disabled"; + apbmisc@70000800 { + compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ }; - i2c@7000d000 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000d000 0x100>; - interrupts = <0 53 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 47>, <&tegra_car 182>; - clock-names = "div-clk", "fast-clk"; - status = "disabled"; + pinmux: pinmux@70000868 { + compatible = "nvidia,tegra30-pinmux"; + reg = <0x70000868 0xd4 /* Pad control registers */ + 0x70003000 0x3e4>; /* Mux registers */ }; + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the compatible is + * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart". + */ uarta: serial@70006000 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; @@ -271,128 +439,506 @@ status = "disabled"; }; + pwm: pwm@7000a000 { + compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA30_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + status = "disabled"; + }; + + rtc@7000e000 { + compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; + reg = <0x7000e000 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_RTC>; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA30_CLK_I2C1>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA30_CLK_I2C2>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA30_CLK_I2C3>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA30_CLK_I2C4>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; + resets = <&tegra_car 103>; + reset-names = "i2c"; + clock-names = "div-clk", "fast-clk"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA30_CLK_I2C5>, + <&tegra_car TEGRA30_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi@7000d400 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d400 0x200>; - interrupts = <0 59 0x04>; - nvidia,dma-request-selector = <&apbdma 15>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 41>; + clocks = <&tegra_car TEGRA30_CLK_SBC1>; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; status = "disabled"; }; spi@7000d600 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000d600 0x200>; - interrupts = <0 82 0x04>; - nvidia,dma-request-selector = <&apbdma 16>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 44>; + clocks = <&tegra_car TEGRA30_CLK_SBC2>; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; status = "disabled"; }; spi@7000d800 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; - reg = <0x7000d480 0x200>; - interrupts = <0 83 0x04>; - nvidia,dma-request-selector = <&apbdma 17>; + reg = <0x7000d800 0x200>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 46>; + clocks = <&tegra_car TEGRA30_CLK_SBC3>; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; status = "disabled"; }; spi@7000da00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000da00 0x200>; - interrupts = <0 93 0x04>; - nvidia,dma-request-selector = <&apbdma 18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 68>; + clocks = <&tegra_car TEGRA30_CLK_SBC4>; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; status = "disabled"; }; spi@7000dc00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000dc00 0x200>; - interrupts = <0 94 0x04>; - nvidia,dma-request-selector = <&apbdma 27>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 104>; + clocks = <&tegra_car TEGRA30_CLK_SBC5>; + resets = <&tegra_car 104>; + reset-names = "spi"; + dmas = <&apbdma 27>, <&apbdma 27>; + dma-names = "rx", "tx"; status = "disabled"; }; spi@7000de00 { compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; reg = <0x7000de00 0x200>; - interrupts = <0 79 0x04>; - nvidia,dma-request-selector = <&apbdma 28>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; - clocks = <&tegra_car 105>; + clocks = <&tegra_car TEGRA30_CLK_SBC6>; + resets = <&tegra_car 106>; + reset-names = "spi"; + dmas = <&apbdma 28>, <&apbdma 28>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + kbc@7000e200 { + compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_KBC>; + resets = <&tegra_car 36>; + reset-names = "kbc"; + status = "disabled"; + }; + + pmc@7000e400 { + compatible = "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + }; + + mc: memory-controller@7000f000 { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x400>; + clocks = <&tegra_car TEGRA30_CLK_MC>; + clock-names = "mc"; + + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <1>; + }; + + fuse@7000f800 { + compatible = "nvidia,tegra30-efuse"; + reg = <0x7000f800 0x400>; + clocks = <&tegra_car TEGRA30_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + hda@70030000 { + compatible = "nvidia,tegra30-hda"; + reg = <0x70030000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_HDA>, + <&tegra_car TEGRA30_CLK_HDA2HDMI>, + <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; status = "disabled"; }; + ahub@70080000 { + compatible = "nvidia,tegra30-ahub"; + reg = <0x70080000 0x200 + 0x70080200 0x100>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>, + <&tegra_car TEGRA30_CLK_APBIF>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, /* d_audio */ + <&tegra_car 107>, /* apbif */ + <&tegra_car 30>, /* i2s0 */ + <&tegra_car 11>, /* i2s1 */ + <&tegra_car 18>, /* i2s2 */ + <&tegra_car 101>, /* i2s3 */ + <&tegra_car 102>, /* i2s4 */ + <&tegra_car 108>, /* dam0 */ + <&tegra_car 109>, /* dam1 */ + <&tegra_car 110>, /* dam2 */ + <&tegra_car 10>; /* spdif */ + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif"; + dmas = <&apbdma 1>, <&apbdma 1>, + <&apbdma 2>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 3>, + <&apbdma 4>, <&apbdma 4>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", + "rx3", "tx3"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70080300 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080300 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA30_CLK_I2S0>; + resets = <&tegra_car 30>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s1: i2s@70080400 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080400 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA30_CLK_I2S1>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s2: i2s@70080500 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080500 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA30_CLK_I2S2>; + resets = <&tegra_car 18>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s3: i2s@70080600 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080600 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA30_CLK_I2S3>; + resets = <&tegra_car 101>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s4: i2s@70080700 { + compatible = "nvidia,tegra30-i2s"; + reg = <0x70080700 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA30_CLK_I2S4>; + resets = <&tegra_car 102>; + reset-names = "i2s"; + status = "disabled"; + }; + }; + sdhci@78000000 { - compatible = "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; - interrupts = <0 14 0x04>; - clocks = <&tegra_car 14>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC1>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; status = "disabled"; }; sdhci@78000200 { - compatible = "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; - interrupts = <0 15 0x04>; - clocks = <&tegra_car 9>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC2>; + resets = <&tegra_car 9>; + reset-names = "sdhci"; status = "disabled"; }; sdhci@78000400 { - compatible = "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; - interrupts = <0 19 0x04>; - clocks = <&tegra_car 69>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + resets = <&tegra_car 69>; + reset-names = "sdhci"; status = "disabled"; }; sdhci@78000600 { - compatible = "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; - interrupts = <0 31 0x04>; - clocks = <&tegra_car 15>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_SDMMC4>; + resets = <&tegra_car 15>; + reset-names = "sdhci"; status = "disabled"; }; usb@7d000000 { - compatible = "nvidia,tegra30-ehci"; + compatible = "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d000000 0x4000>; - interrupts = <52>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; phy_type = "utmi"; - clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */ + clocks = <&tegra_car TEGRA30_CLK_USBD>; + resets = <&tegra_car 22>; + reset-names = "usb"; + nvidia,needs-double-reset; + nvidia,phy = <&phy1>; + status = "disabled"; + }; + + phy1: usb-phy@7d000000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USBD>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <1>; + nvidia,xcvr-lsrslew = <1>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; usb@7d004000 { - compatible = "nvidia,tegra30-ehci"; + compatible = "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d004000 0x4000>; - interrupts = <53>; - phy_type = "hsic"; - clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */ + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>; + resets = <&tegra_car 58>; + reset-names = "usb"; + nvidia,phy = <&phy2>; + status = "disabled"; + }; + + phy2: usb-phy@7d004000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d004000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB2>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; status = "disabled"; }; usb@7d008000 { - compatible = "nvidia,tegra30-ehci"; + compatible = "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d008000 0x4000>; - interrupts = <129>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + phy_type = "utmi"; + clocks = <&tegra_car TEGRA30_CLK_USB3>; + resets = <&tegra_car 59>; + reset-names = "usb"; + nvidia,phy = <&phy3>; + status = "disabled"; + }; + + phy3: usb-phy@7d008000 { + compatible = "nvidia,tegra30-usb-phy"; + reg = <0x7d008000 0x4000 0x7d000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */ + clocks = <&tegra_car TEGRA30_CLK_USB3>, + <&tegra_car TEGRA30_CLK_PLL_U>, + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; + nvidia,hssync-start-delay = <0>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; status = "disabled"; }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h index 7daf8bc163..388afcb723 100644 --- a/arch/arm/include/asm/arch-tegra/clock.h +++ b/arch/arm/include/asm/arch-tegra/clock.h @@ -187,6 +187,16 @@ void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source, unsigned divisor); /** + * Returns the current parent clock ID of a given peripheral. This can be + * useful in order to call clock_*_periph_*() from generic code that has no + * specific knowledge of system-level clock tree structure. + * + * @param periph_id peripheral to query + * @return clock ID of the peripheral's current parent clock + */ +enum clock_id clock_get_periph_parent(enum periph_id periph_id); + +/** * Start a peripheral PLL clock at the given rate. This also resets the * peripheral. * @@ -284,6 +294,36 @@ u32 *get_periph_source_reg(enum periph_id periph_id); /* Returns a pointer to the given 'simple' PLL */ struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid); +/* + * Given a peripheral ID, determine where the mux bits are in the peripheral + * clock's register, the number of divider bits the clock has, and the SoC- + * specific clock type. + * + * This is an internal API between the core Tegra clock code and the SoC- + * specific clock code. + * + * @param periph_id peripheral to query + * @param mux_bits Set to number of bits in mux register + * @param divider_bits Set to the relevant MASK_BITS_* value + * @param type Set to the SoC-specific clock type + * @return 0 on success, -1 on error + */ +int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, + int *divider_bits, int *type); + +/* + * Given a peripheral ID and clock source mux value, determine the clock_id + * of that peripheral's parent. + * + * This is an internal API between the core Tegra clock code and the SoC- + * specific clock code. + * + * @param periph_id peripheral to query + * @param source raw clock source mux value + * @return the CLOCK_ID_* value @source represents + */ +enum clock_id get_periph_clock_id(enum periph_id periph_id, int source); + /** * Given a peripheral ID and the required source clock, this returns which * value should be programmed into the source mux for that peripheral. @@ -362,6 +402,12 @@ struct clk_pll_info { }; extern struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT]; +struct periph_clk_init { + enum periph_id periph_id; + enum clock_id parent_clock_id; +}; +extern struct periph_clk_init periph_clk_init_table[]; + /** * Enable output clock for external peripherals * diff --git a/arch/arm/include/asm/arch-tegra/mmc.h b/arch/arm/include/asm/arch-tegra/mmc.h deleted file mode 100644 index c2d52b2977..0000000000 --- a/arch/arm/include/asm/arch-tegra/mmc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * Copyright (c) 2011, Google Inc. All rights reserved. - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _TEGRA_MMC_H_ -#define _TEGRA_MMC_H_ - -void tegra_mmc_init(void); - -#endif /* _TEGRA_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h index 07ef4c04c8..64c848acb1 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h +++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h @@ -132,26 +132,5 @@ struct tegra_mmc { #define AUTO_CAL_PD_OFFSET (0x70 << 8) #define AUTO_CAL_PU_OFFSET (0x62 << 0) -struct mmc_host { - struct tegra_mmc *reg; - int id; /* device id/number, 0-3 */ - int enabled; /* 1 to enable, 0 to disable */ - int width; /* Bus Width, 1, 4 or 8 */ -#ifdef CONFIG_TEGRA186 - struct reset_ctl reset_ctl; - struct clk clk; -#else - enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ -#endif - struct gpio_desc cd_gpio; /* Change Detect GPIO */ - struct gpio_desc pwr_gpio; /* Power GPIO */ - struct gpio_desc wp_gpio; /* Write Protect GPIO */ - unsigned int version; /* SDHCI spec. version */ - unsigned int clock; /* Current clock (MHz) */ - struct mmc_config cfg; /* mmc configuration */ -}; - -void pad_init_mmc(struct mmc_host *host); - #endif /* __ASSEMBLY__ */ #endif /* __TEGRA_MMC_H_ */ diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 0fd71a717a..6e8026bde2 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,14 +1,42 @@ if ARCH_MVEBU +config ARMADA_32BIT + bool + select CPU_V7 + select SUPPORT_SPL + select SPL_DM + select SPL_DM_SEQ_ALIAS + select SPL_OF_CONTROL + select SPL_SIMPLE_BUS + +config ARMADA_64BIT + bool + select ARM64 + +# ARMv7 SoCs... config ARMADA_375 bool + select ARMADA_32BIT config ARMADA_38X bool + select ARMADA_32BIT config ARMADA_XP bool + select ARMADA_32BIT + +# ARMv8 SoCs... +config ARMADA_3700 + bool + select ARM64 +# Armada 7K and 8K are very similar - use only one Kconfig symbol for both +config ARMADA_8K + bool + select ARM64 + +# Armada XP/38x SoC types... config MV78230 bool select ARMADA_XP @@ -26,13 +54,17 @@ config 88F6820 select ARMADA_38X choice - prompt "Marvell MVEBU (Armada XP/375/38x) board select" + prompt "Armada XP/375/38x/3700/7K/8K board select" optional config TARGET_CLEARFOG bool "Support ClearFog" select 88F6820 +config TARGET_MVEBU_DB_88F3720 + bool "Support DB-88F3720 Armada 3720" + select ARMADA_3700 + config TARGET_DB_88F6720 bool "Support DB-88F6720 Armada 375" select ARMADA_375 @@ -45,6 +77,10 @@ config TARGET_DB_88F6820_AMC bool "Support DB-88F6820-AMC" select 88F6820 +config TARGET_MVEBU_DB_88F7040 + bool "Support DB-88F7040 Armada 7040" + select ARMADA_8K + config TARGET_DB_MV784MP_GP bool "Support db-mv784mp-gp" select MV78460 @@ -65,9 +101,11 @@ endchoice config SYS_BOARD default "clearfog" if TARGET_CLEARFOG + default "mvebu_db-88f3720" if TARGET_MVEBU_DB_88F3720 default "db-88f6720" if TARGET_DB_88F6720 default "db-88f6820-gp" if TARGET_DB_88F6820_GP default "db-88f6820-amc" if TARGET_DB_88F6820_AMC + default "mvebu_db-88f7040" if TARGET_MVEBU_DB_88F7040 default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM @@ -75,9 +113,11 @@ config SYS_BOARD config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG + default "mvebu_db-88f3720" if TARGET_MVEBU_DB_88F3720 default "db-88f6720" if TARGET_DB_88F6720 default "db-88f6820-gp" if TARGET_DB_88F6820_GP default "db-88f6820-amc" if TARGET_DB_88F6820_AMC + default "mvebu_db-88f7040" if TARGET_MVEBU_DB_88F7040 default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM @@ -85,9 +125,11 @@ config SYS_CONFIG_NAME config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP + default "Marvell" if TARGET_MVEBU_DB_88F3720 default "Marvell" if TARGET_DB_88F6720 default "Marvell" if TARGET_DB_88F6820_GP default "Marvell" if TARGET_DB_88F6820_AMC + default "Marvell" if TARGET_MVEBU_DB_88F7040 default "solidrun" if TARGET_CLEARFOG default "Synology" if TARGET_DS414 diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index ac009a36da..65e90c4fc9 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,16 +1,25 @@ # -# Copyright (C) 2014-2015 Stefan Roese <sr@denx.de> +# Copyright (C) 2014-2016 Stefan Roese <sr@denx.de> # # SPDX-License-Identifier: GPL-2.0+ # +ifdef CONFIG_ARM64 + +obj-$(CONFIG_ARMADA_3700) += armada3700/ +obj-$(CONFIG_ARMADA_8K) += armada8k/ +obj-y += arm64-common.o +obj-y += sata.o + +else # CONFIG_ARM64 + ifdef CONFIG_KIRKWOOD obj-y = dram.o obj-y += gpio.o obj-y += timer.o -else +else # CONFIG_KIRKWOOD obj-y = cpu.o obj-y += dram.o @@ -18,7 +27,7 @@ ifndef CONFIG_SPL_BUILD obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o -endif +endif # CONFIG_SPL_BUILD obj-y += gpio.o obj-y += mbus.o obj-y += timer.o @@ -28,4 +37,5 @@ obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o obj-$(CONFIG_ARMADA_38X) += serdes/a38x/ obj-$(CONFIG_ARMADA_XP) += serdes/axp/ -endif +endif # CONFIG_KIRKWOOD +endif # CONFIG_ARM64 diff --git a/arch/arm/mach-mvebu/arm64-common.c b/arch/arm/mach-mvebu/arm64-common.c new file mode 100644 index 0000000000..7055a81de3 --- /dev/null +++ b/arch/arm/mach-mvebu/arm64-common.c @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <asm/armv8/mmu.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * On ARMv8, MBus is not configured in U-Boot. To enable compilation + * of the already implemented drivers, lets add a dummy version of + * this function so that linking does not fail. + */ +const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) +{ + return NULL; +} + +/* DRAM init code ... */ + +static const void *get_memory_reg_prop(const void *fdt, int *lenp) +{ + int offset; + + offset = fdt_path_offset(fdt, "/memory"); + if (offset < 0) + return NULL; + + return fdt_getprop(fdt, offset, "reg", lenp); +} + +int dram_init(void) +{ + const void *fdt = gd->fdt_blob; + const fdt32_t *val; + int ac, sc, len; + + ac = fdt_address_cells(fdt, 0); + sc = fdt_size_cells(fdt, 0); + if (ac < 0 || sc < 1 || sc > 2) { + printf("invalid address/size cells\n"); + return -EINVAL; + } + + val = get_memory_reg_prop(fdt, &len); + if (len / sizeof(*val) < ac + sc) + return -EINVAL; + + val += ac; + + gd->ram_size = fdtdec_get_number(val, sc); + + debug("DRAM size = %08lx\n", (unsigned long)gd->ram_size); + + return 0; +} + +void dram_init_banksize(void) +{ + const void *fdt = gd->fdt_blob; + const fdt32_t *val; + int ac, sc, cells, len, i; + + val = get_memory_reg_prop(fdt, &len); + if (len < 0) + return; + + ac = fdt_address_cells(fdt, 0); + sc = fdt_size_cells(fdt, 0); + if (ac < 1 || sc > 2 || sc < 1 || sc > 2) { + printf("invalid address/size cells\n"); + return; + } + + cells = ac + sc; + + len /= sizeof(*val); + + for (i = 0; i < CONFIG_NR_DRAM_BANKS && len >= cells; + i++, len -= cells) { + gd->bd->bi_dram[i].start = fdtdec_get_number(val, ac); + val += ac; + gd->bd->bi_dram[i].size = fdtdec_get_number(val, sc); + val += sc; + + debug("DRAM bank %d: start = %08lx, size = %08lx\n", + i, (unsigned long)gd->bd->bi_dram[i].start, + (unsigned long)gd->bd->bi_dram[i].size); + } +} + +int arch_cpu_init(void) +{ + /* Nothing to do (yet) */ + return 0; +} + +int arch_early_init_r(void) +{ + struct udevice *dev; + int ret; + + /* Call the comphy code via the MISC uclass driver */ + ret = uclass_get_device(UCLASS_MISC, 0, &dev); + if (ret) { + debug("COMPHY init failed: %d\n", ret); + return -ENODEV; + } + + /* Cause the SATA device to do its early init */ + uclass_first_device(UCLASS_AHCI, &dev); + + return 0; +} diff --git a/arch/arm/mach-mvebu/armada3700/Makefile b/arch/arm/mach-mvebu/armada3700/Makefile new file mode 100644 index 0000000000..84c69d90e7 --- /dev/null +++ b/arch/arm/mach-mvebu/armada3700/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2016 Stefan Roese <sr@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = cpu.o diff --git a/arch/arm/mach-mvebu/armada3700/cpu.c b/arch/arm/mach-mvebu/armada3700/cpu.c new file mode 100644 index 0000000000..6499eec4ea --- /dev/null +++ b/arch/arm/mach-mvebu/armada3700/cpu.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <asm/armv8/mmu.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Armada 3700 */ +#define MVEBU_GPIO_NB_REG_BASE (MVEBU_REGISTER(0x13800)) + +#define MVEBU_TEST_PIN_LATCH_N (MVEBU_GPIO_NB_REG_BASE + 0x8) +#define MVEBU_XTAL_MODE_MASK BIT(9) +#define MVEBU_XTAL_MODE_OFFS 9 +#define MVEBU_XTAL_CLOCK_25MHZ 0x0 +#define MVEBU_XTAL_CLOCK_40MHZ 0x1 + +#define MVEBU_NB_WARM_RST_REG (MVEBU_GPIO_NB_REG_BASE + 0x40) +#define MVEBU_NB_WARM_RST_MAGIC_NUM 0x1d1e + +static struct mm_region mvebu_mem_map[] = { + { + /* RAM */ + .phys = 0x0UL, + .virt = 0x0UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, + { + /* SRAM, MMIO regions */ + .phys = 0xd0000000UL, + .virt = 0xd0000000UL, + .size = 0x02000000UL, /* 32MiB internal registers */ + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + }, + { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = mvebu_mem_map; + +void reset_cpu(ulong ignored) +{ + /* + * Write magic number of 0x1d1e to North Bridge Warm Reset register + * to trigger warm reset + */ + writel(MVEBU_NB_WARM_RST_MAGIC_NUM, MVEBU_NB_WARM_RST_REG); +} + +/* + * get_ref_clk + * + * return: reference clock in MHz (25 or 40) + */ +u32 get_ref_clk(void) +{ + u32 regval; + + regval = (readl(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >> + MVEBU_XTAL_MODE_OFFS; + + if (regval == MVEBU_XTAL_CLOCK_25MHZ) + return 25; + else + return 40; +} diff --git a/arch/arm/mach-mvebu/armada8k/Makefile b/arch/arm/mach-mvebu/armada8k/Makefile new file mode 100644 index 0000000000..84c69d90e7 --- /dev/null +++ b/arch/arm/mach-mvebu/armada8k/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2016 Stefan Roese <sr@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = cpu.o diff --git a/arch/arm/mach-mvebu/armada8k/cpu.c b/arch/arm/mach-mvebu/armada8k/cpu.c new file mode 100644 index 0000000000..036430c46c --- /dev/null +++ b/arch/arm/mach-mvebu/armada8k/cpu.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <asm/armv8/mmu.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Armada 7k/8k */ +#define MVEBU_RFU_BASE (MVEBU_REGISTER(0x6f0000)) +#define RFU_GLOBAL_SW_RST (MVEBU_RFU_BASE + 0x84) +#define RFU_SW_RESET_OFFSET 0 + +static struct mm_region mvebu_mem_map[] = { + { + /* RAM */ + .phys = 0x0UL, + .virt = 0x0UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, + { + /* SRAM, MMIO regions - AP806 region */ + .phys = 0xf0000000UL, + .virt = 0xf0000000UL, + .size = 0x01000000UL, /* 16MiB internal registers */ + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + }, + { + /* SRAM, MMIO regions - CP110 region */ + .phys = 0xf2000000UL, + .virt = 0xf2000000UL, + .size = 0x02000000UL, /* 32MiB internal registers */ + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + }, + { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = mvebu_mem_map; + +void reset_cpu(ulong ignored) +{ + u32 reg; + + reg = readl(RFU_GLOBAL_SW_RST); + reg &= ~(1 << RFU_SW_RESET_OFFSET); + writel(reg, RFU_GLOBAL_SW_RST); +} diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index cbec876c42..66f7680fb3 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -166,5 +166,12 @@ struct mvebu_lcd_info { int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info); +/* + * get_ref_clk + * + * return: reference clock in MHz (25 or 40) + */ +u32 get_ref_clk(void); + #endif /* __ASSEMBLY__ */ #endif /* _MVEBU_CPU_H */ diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index 6342cdc35c..731fe65ae4 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -37,7 +37,7 @@ /* SOC specific definations */ #define INTREG_BASE 0xd0000000 #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700) /* * The SPL U-Boot version still runs with the default * address for the internal registers, configured by @@ -46,6 +46,8 @@ * required for the Linux kernel. */ #define SOC_REGS_PHY_BASE 0xd0000000 +#elif defined(CONFIG_ARMADA_8K) +#define SOC_REGS_PHY_BASE 0xf0000000 #else #define SOC_REGS_PHY_BASE 0xf1000000 #endif diff --git a/arch/arm/mach-mvebu/sata.c b/arch/arm/mach-mvebu/sata.c new file mode 100644 index 0000000000..140a2952c3 --- /dev/null +++ b/arch/arm/mach-mvebu/sata.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ahci.h> +#include <dm.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Dummy implementation that can be overwritten by a board + * specific function + */ +__weak int board_ahci_enable(void) +{ + return 0; +} + +#ifdef CONFIG_ARMADA_8K +/* CP110 has different AHCI port addresses */ +void __iomem *ahci_port_base(void __iomem *base, u32 port) +{ + return base + 0x10000 + (port * 0x10000); +} +#endif + +static int mvebu_ahci_probe(struct udevice *dev) +{ + /* + * Board specific SATA / AHCI enable code, e.g. enable the + * AHCI power or deassert reset + */ + board_ahci_enable(); + + ahci_init(dev_get_addr_ptr(dev)); + + return 0; +} + +static const struct udevice_id mvebu_ahci_ids[] = { + { .compatible = "marvell,armada-3700-ahci" }, + { .compatible = "marvell,armada-8k-ahci" }, + { } +}; + +U_BOOT_DRIVER(ahci_mvebu_drv) = { + .name = "ahci_mvebu", + .id = UCLASS_AHCI, + .of_match = mvebu_ahci_ids, + .probe = mvebu_ahci_probe, +}; diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 76909ee2d9..316feba29d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -22,20 +22,30 @@ config TEGRA_IVC config TEGRA_COMMON bool "Tegra common options" + select CLK select DM select DM_ETH select DM_GPIO select DM_I2C select DM_KEYBOARD + select DM_MMC select DM_PCI select DM_PCI_COMPAT select DM_PWM + select DM_RESET select DM_SERIAL select DM_SPI select DM_SPI_FLASH + select MISC select OF_CONTROL select VIDCONSOLE_AS_LCD if DM_VIDEO +config TEGRA_NO_BPMP + bool "Tegra common options for SoCs without BPMP" + select TEGRA_CAR + select TEGRA_CAR_CLOCK + select TEGRA_CAR_RESET + config TEGRA_ARMV7_COMMON bool "Tegra 32-bit common options" select CPU_V7 @@ -43,6 +53,7 @@ config TEGRA_ARMV7_COMMON select SUPPORT_SPL select TEGRA_COMMON select TEGRA_GPIO + select TEGRA_NO_BPMP config TEGRA_ARMV8_COMMON bool "Tegra 64-bit common options" @@ -73,13 +84,11 @@ config TEGRA210 bool "Tegra210 family" select TEGRA_GPIO select TEGRA_ARMV8_COMMON + select TEGRA_NO_BPMP config TEGRA186 bool "Tegra186 family" - select CLK select DM_MAILBOX - select DM_RESET - select MISC select TEGRA186_BPMP select TEGRA186_CLOCK select TEGRA186_GPIO diff --git a/arch/arm/mach-tegra/board186.c b/arch/arm/mach-tegra/board186.c index 1b9799fd80..a071758afe 100644 --- a/arch/arm/mach-tegra/board186.c +++ b/arch/arm/mach-tegra/board186.c @@ -6,8 +6,6 @@ #include <common.h> #include <asm/arch/tegra.h> -#include <asm/arch-tegra/mmc.h> -#include <asm/arch-tegra/tegra_mmc.h> DECLARE_GLOBAL_DATA_PTR; @@ -30,14 +28,3 @@ int board_late_init(void) { return 0; } - -void pad_init_mmc(struct mmc_host *host) -{ -} - -int board_mmc_init(bd_t *bd) -{ - tegra_mmc_init(); - - return 0; -} diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 9158ace44c..cb9503f8e6 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -32,10 +32,6 @@ #ifdef CONFIG_USB_EHCI_TEGRA #include <usb.h> #endif -#ifdef CONFIG_TEGRA_MMC -#include <asm/arch-tegra/tegra_mmc.h> -#include <asm/arch-tegra/mmc.h> -#endif #include <asm/arch-tegra/xusb-padctl.h> #include <power/as3722.h> #include <i2c.h> @@ -54,6 +50,7 @@ U_BOOT_DEVICE(tegra_gpios) = { __weak void pinmux_init(void) {} __weak void pin_mux_usb(void) {} __weak void pin_mux_spi(void) {} +__weak void pin_mux_mmc(void) {} __weak void gpio_early_init_uart(void) {} __weak void pin_mux_display(void) {} __weak void start_cpu_fan(void) {} @@ -128,6 +125,10 @@ int board_init(void) pin_mux_spi(); #endif +#ifdef CONFIG_TEGRA_MMC + pin_mux_mmc(); +#endif + /* Init is handled automatically in the driver-model case */ #if defined(CONFIG_DM_VIDEO) pin_mux_display(); @@ -230,54 +231,6 @@ int board_late_init(void) return 0; } -#if defined(CONFIG_TEGRA_MMC) -__weak void pin_mux_mmc(void) -{ -} - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("%s called\n", __func__); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("%s: init MMC\n", __func__); - tegra_mmc_init(); - - return 0; -} - -void pad_init_mmc(struct mmc_host *host) -{ -#if defined(CONFIG_TEGRA30) - enum periph_id id = host->mmc_id; - u32 val; - - debug("%s: sdmmc address = %08x, id = %d\n", __func__, - (unsigned int)host->reg, id); - - /* Set the pad drive strength for SDMMC1 or 3 only */ - if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) { - debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", - __func__); - return; - } - - val = readl(&host->reg->sdmemcmppadctl); - val &= 0xFFFFFFF0; - val |= MEMCOMP_PADCTRL_VREF; - writel(val, &host->reg->sdmemcmppadctl); - - val = readl(&host->reg->autocalcfg); - val &= 0xFFFF0000; - val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; - writel(val, &host->reg->autocalcfg); -#endif /* T30 */ -} -#endif /* MMC */ - /* * In some SW environments, a memory carve-out exists to house a secure * monitor, a trusted OS, and/or various statically allocated media buffers. diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 36eabc8f57..3bb72331a4 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -206,6 +206,29 @@ int clock_ll_set_source_bits(enum periph_id periph_id, int mux_bits, return 0; } +static int clock_ll_get_source_bits(enum periph_id periph_id, int mux_bits) +{ + u32 *reg = get_periph_source_reg(periph_id); + u32 val = readl(reg); + + switch (mux_bits) { + case MASK_BITS_31_30: + val >>= OUT_CLK_SOURCE_31_30_SHIFT; + val &= OUT_CLK_SOURCE_31_30_MASK; + return val; + case MASK_BITS_31_29: + val >>= OUT_CLK_SOURCE_31_29_SHIFT; + val &= OUT_CLK_SOURCE_31_29_MASK; + return val; + case MASK_BITS_31_28: + val >>= OUT_CLK_SOURCE_31_28_SHIFT; + val &= OUT_CLK_SOURCE_31_28_MASK; + return val; + default: + return -1; + } +} + void clock_ll_set_source(enum periph_id periph_id, unsigned source) { clock_ll_set_source_bits(periph_id, MASK_BITS_31_30, source); @@ -288,9 +311,43 @@ unsigned long clock_get_periph_rate(enum periph_id periph_id, enum clock_id parent) { u32 *reg = get_periph_source_reg(periph_id); + unsigned parent_rate = pll_rate[parent]; + int div = (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT; + + switch (periph_id) { + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + case PERIPH_ID_UART4: + case PERIPH_ID_UART5: +#ifdef CONFIG_TEGRA20 + /* There's no divider for these clocks in this SoC. */ + return parent_rate; +#else + /* + * This undoes the +2 in get_rate_from_divider() which I + * believe is incorrect. Ideally we would fix + * get_rate_from_divider(), but... Removing the +2 from + * get_rate_from_divider() would probably require remove the -2 + * from the tail of clk_get_divider() since I believe that's + * only there to invert get_rate_from_divider()'s +2. Observe + * how find_best_divider() uses those two functions together. + * However, doing so breaks other stuff, such as Seaboard's + * display, likely due to clock_set_pllout()'s call to + * clk_get_divider(). Attempting to fix that by making + * clock_set_pllout() subtract 2 from clk_get_divider()'s + * return value doesn't help. In summary this clock driver is + * quite broken but I'm afraid I have no idea how to fix it + * without completely replacing it. + */ + div -= 2; + break; +#endif + default: + break; + } - return get_rate_from_divider(pll_rate[parent], - (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT); + return get_rate_from_divider(parent_rate, div); } /** @@ -363,6 +420,20 @@ static int adjust_periph_pll(enum periph_id periph_id, int source, return 0; } +enum clock_id clock_get_periph_parent(enum periph_id periph_id) +{ + int err, mux_bits, divider_bits, type; + int source; + + err = get_periph_clock_info(periph_id, &mux_bits, ÷r_bits, &type); + if (err) + return CLOCK_ID_NONE; + + source = clock_ll_get_source_bits(periph_id, mux_bits); + + return get_periph_clock_id(periph_id, source); +} + unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, enum clock_id parent, unsigned rate, int *extra_div) { @@ -612,6 +683,8 @@ int clock_verify(void) void clock_init(void) { + int i; + pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL); pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY); pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH); @@ -630,6 +703,19 @@ void clock_init(void) debug("PLLU = %d\n", pll_rate[CLOCK_ID_USB]); debug("PLLD = %d\n", pll_rate[CLOCK_ID_DISPLAY]); debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]); + + for (i = 0; periph_clk_init_table[i].periph_id != -1; i++) { + enum periph_id periph_id; + enum clock_id parent; + int source, mux_bits, divider_bits; + + periph_id = periph_clk_init_table[i].periph_id; + parent = periph_clk_init_table[i].parent_clock_id; + + source = get_periph_clock_source(periph_id, parent, &mux_bits, + ÷r_bits); + clock_ll_set_source_bits(periph_id, mux_bits, source); + } } static void set_avp_clock_source(u32 src) diff --git a/arch/arm/mach-tegra/tegra114/clock.c b/arch/arm/mach-tegra/tegra114/clock.c index e6ef873c8d..177ab6b55b 100644 --- a/arch/arm/mach-tegra/tegra114/clock.c +++ b/arch/arm/mach-tegra/tegra114/clock.c @@ -496,6 +496,51 @@ u32 *get_periph_source_reg(enum periph_id periph_id) return &clkrst->crc_clk_src[internal_id]; } +int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, + int *divider_bits, int *type) +{ + enum periphc_internal_id internal_id; + + if (!clock_periph_id_isvalid(periph_id)) + return -1; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return -1; + + *type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(*type)) + return -1; + + *mux_bits = clock_source[*type][CLOCK_MAX_MUX]; + + if (*type == CLOCK_TYPE_PCMT16) + *divider_bits = 16; + else + *divider_bits = 8; + + return 0; +} + +enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) +{ + enum periphc_internal_id internal_id; + int type; + + if (!clock_periph_id_isvalid(periph_id)) + return CLOCK_ID_NONE; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return CLOCK_ID_NONE; + + type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(type)) + return CLOCK_ID_NONE; + + return clock_source[type][source]; +} + /** * Given a peripheral ID and the required source clock, this returns which * value should be programmed into the source mux for that peripheral. @@ -512,23 +557,10 @@ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) { enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; - - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); + int mux, err; - *mux_bits = clock_source[type][CLOCK_MAX_MUX]; - - if (type == CLOCK_TYPE_PCMT16) - *divider_bits = 16; - else - *divider_bits = 8; + err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type); + assert(!err); for (mux = 0; mux < CLOCK_MAX_MUX; mux++) if (clock_source[type][mux] == parent) @@ -699,3 +731,26 @@ void arch_timer_init(void) writel(val, &sysctr->cntcr); debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); } + +struct periph_clk_init periph_clk_init_table[] = { + { PERIPH_ID_SBC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC5, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC6, CLOCK_ID_PERIPH }, + { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH }, + { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL }, + { PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ }, + { PERIPH_ID_I2C1, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C2, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C3, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C4, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C5, CLOCK_ID_PERIPH }, + { -1, }, +}; diff --git a/arch/arm/mach-tegra/tegra124/clock.c b/arch/arm/mach-tegra/tegra124/clock.c index 1e71146236..5e4406102f 100644 --- a/arch/arm/mach-tegra/tegra124/clock.c +++ b/arch/arm/mach-tegra/tegra124/clock.c @@ -642,6 +642,51 @@ u32 *get_periph_source_reg(enum periph_id periph_id) } } +int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, + int *divider_bits, int *type) +{ + enum periphc_internal_id internal_id; + + if (!clock_periph_id_isvalid(periph_id)) + return -1; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return -1; + + *type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(*type)) + return -1; + + *mux_bits = clock_source[*type][CLOCK_MAX_MUX]; + + if (*type == CLOCK_TYPE_PC2CC3M_T16) + *divider_bits = 16; + else + *divider_bits = 8; + + return 0; +} + +enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) +{ + enum periphc_internal_id internal_id; + int type; + + if (!clock_periph_id_isvalid(periph_id)) + return CLOCK_ID_NONE; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return CLOCK_ID_NONE; + + type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(type)) + return CLOCK_ID_NONE; + + return clock_source[type][source]; +} + /** * Given a peripheral ID and the required source clock, this returns which * value should be programmed into the source mux for that peripheral. @@ -658,23 +703,10 @@ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) { enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; + int mux, err; - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); - - *mux_bits = clock_source[type][CLOCK_MAX_MUX]; - - if (type == CLOCK_TYPE_PC2CC3M_T16) - *divider_bits = 16; - else - *divider_bits = 8; + err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type); + assert(!err); for (mux = 0; mux < CLOCK_MAX_MUX; mux++) if (clock_source[type][mux] == parent) @@ -1107,3 +1139,26 @@ struct clk_pll_simple *clock_get_simple_pll(enum clock_id clkid) return NULL; } + +struct periph_clk_init periph_clk_init_table[] = { + { PERIPH_ID_SBC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC5, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC6, CLOCK_ID_PERIPH }, + { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH }, + { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL }, + { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ }, + { PERIPH_ID_I2C1, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C2, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C3, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C4, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C5, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C6, CLOCK_ID_PERIPH }, + { -1, }, +}; diff --git a/arch/arm/mach-tegra/tegra186/Makefile b/arch/arm/mach-tegra/tegra186/Makefile index 033d6005fb..7f46a057bc 100644 --- a/arch/arm/mach-tegra/tegra186/Makefile +++ b/arch/arm/mach-tegra/tegra186/Makefile @@ -3,5 +3,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-y += ../board186.o +obj-y += cache.o obj-y += nvtboot_ll.o obj-y += nvtboot_mem.o diff --git a/arch/arm/mach-tegra/tegra186/cache.c b/arch/arm/mach-tegra/tegra186/cache.c new file mode 100644 index 0000000000..adaed8968e --- /dev/null +++ b/arch/arm/mach-tegra/tegra186/cache.c @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <asm/system.h> + +#define SMC_SIP_INVOKE_MCE 0x82FFFF00 +#define MCE_SMC_ROC_FLUSH_CACHE 11 + +int __asm_flush_l3_cache(void) +{ + struct pt_regs regs = {0}; + + isb(); + + regs.regs[0] = SMC_SIP_INVOKE_MCE | MCE_SMC_ROC_FLUSH_CACHE; + smc_call(®s); + + return 0; +} diff --git a/arch/arm/mach-tegra/tegra20/clock.c b/arch/arm/mach-tegra/tegra20/clock.c index cd9fb9a553..ec04cf5261 100644 --- a/arch/arm/mach-tegra/tegra20/clock.c +++ b/arch/arm/mach-tegra/tegra20/clock.c @@ -413,46 +413,78 @@ u32 *get_periph_source_reg(enum periph_id periph_id) return &clkrst->crc_clk_src[internal_id]; } -/** - * Given a peripheral ID and the required source clock, this returns which - * value should be programmed into the source mux for that peripheral. - * - * There is special code here to handle the one source type with 5 sources. - * - * @param periph_id peripheral to start - * @param source PLL id of required parent clock - * @param mux_bits Set to number of bits in mux register: 2 or 4 - * @param divider_bits Set to number of divider bits (8 or 16) - * @return mux value (0-4, or -1 if not found) - */ -int get_periph_clock_source(enum periph_id periph_id, - enum clock_id parent, int *mux_bits, int *divider_bits) +int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, + int *divider_bits, int *type) { - enum clock_type_id type; enum periphc_internal_id internal_id; - int mux; - assert(clock_periph_id_isvalid(periph_id)); + if (!clock_periph_id_isvalid(periph_id)) + return -1; internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); + if (!periphc_internal_id_isvalid(internal_id)) + return -1; - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); + *type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(*type)) + return -1; /* * Special cases here for the clock with a 4-bit source mux and I2C * with its 16-bit divisor */ - if (type == CLOCK_TYPE_PCXTS) + if (*type == CLOCK_TYPE_PCXTS) *mux_bits = MASK_BITS_31_28; else *mux_bits = MASK_BITS_31_30; - if (type == CLOCK_TYPE_PCMT16) + if (*type == CLOCK_TYPE_PCMT16) *divider_bits = 16; else *divider_bits = 8; + return 0; +} + +enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) +{ + enum periphc_internal_id internal_id; + int type; + + if (!clock_periph_id_isvalid(periph_id)) + return CLOCK_ID_NONE; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return CLOCK_ID_NONE; + + type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(type)) + return CLOCK_ID_NONE; + + return clock_source[type][source]; +} + +/** + * Given a peripheral ID and the required source clock, this returns which + * value should be programmed into the source mux for that peripheral. + * + * There is special code here to handle the one source type with 5 sources. + * + * @param periph_id peripheral to start + * @param source PLL id of required parent clock + * @param mux_bits Set to number of bits in mux register: 2 or 4 + * @param divider_bits Set to number of divider bits (8 or 16) + * @return mux value (0-4, or -1 if not found) + */ +int get_periph_clock_source(enum periph_id periph_id, + enum clock_id parent, int *mux_bits, int *divider_bits) +{ + enum clock_type_id type; + int mux, err; + + err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type); + assert(!err); + for (mux = 0; mux < CLOCK_MAX_MUX; mux++) if (clock_source[type][mux] == parent) return mux; @@ -717,3 +749,24 @@ int tegra_plle_enable(void) return 0; } + +struct periph_clk_init periph_clk_init_table[] = { + { PERIPH_ID_SPI1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH }, + { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL }, + { PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ }, + { PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C1, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C2, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C3, CLOCK_ID_PERIPH }, + { -1, }, +}; diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c index f0052e7934..c8bb94626e 100644 --- a/arch/arm/mach-tegra/tegra210/clock.c +++ b/arch/arm/mach-tegra/tegra210/clock.c @@ -732,6 +732,51 @@ u32 *get_periph_source_reg(enum periph_id periph_id) return &clkrst->crc_clk_src_y[internal_id]; } +int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, + int *divider_bits, int *type) +{ + enum periphc_internal_id internal_id; + + if (!clock_periph_id_isvalid(periph_id)) + return -1; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return -1; + + *type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(*type)) + return -1; + + *mux_bits = clock_source[*type][CLOCK_MAX_MUX]; + + if (*type == CLOCK_TYPE_PC2CC3M_T16) + *divider_bits = 16; + else + *divider_bits = 8; + + return 0; +} + +enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) +{ + enum periphc_internal_id internal_id; + int type; + + if (!clock_periph_id_isvalid(periph_id)) + return CLOCK_ID_NONE; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return CLOCK_ID_NONE; + + type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(type)) + return CLOCK_ID_NONE; + + return clock_source[type][source]; +} + /** * Given a peripheral ID and the required source clock, this returns which * value should be programmed into the source mux for that peripheral. @@ -748,23 +793,10 @@ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) { enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; - - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]); - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); + int mux, err; - *mux_bits = clock_source[type][CLOCK_MAX_MUX]; - - if (type == CLOCK_TYPE_PC2CC3M_T16) - *divider_bits = 16; - else - *divider_bits = 8; + err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type); + assert(!err); for (mux = 0; mux < CLOCK_MAX_MUX; mux++) if (clock_source[type][mux] == parent) @@ -1225,3 +1257,26 @@ int tegra_plle_enable(void) return 0; } + +struct periph_clk_init periph_clk_init_table[] = { + { PERIPH_ID_SBC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC5, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC6, CLOCK_ID_PERIPH }, + { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH }, + { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL }, + { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ }, + { PERIPH_ID_I2C1, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C2, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C3, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C4, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C5, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C6, CLOCK_ID_PERIPH }, + { -1, }, +}; diff --git a/arch/arm/mach-tegra/tegra30/clock.c b/arch/arm/mach-tegra/tegra30/clock.c index 1f104f288e..4fd8b8a3b1 100644 --- a/arch/arm/mach-tegra/tegra30/clock.c +++ b/arch/arm/mach-tegra/tegra30/clock.c @@ -476,6 +476,51 @@ u32 *get_periph_source_reg(enum periph_id periph_id) return &clkrst->crc_clk_src[internal_id]; } +int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, + int *divider_bits, int *type) +{ + enum periphc_internal_id internal_id; + + if (!clock_periph_id_isvalid(periph_id)) + return -1; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return -1; + + *type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(*type)) + return -1; + + *mux_bits = clock_source[*type][CLOCK_MAX_MUX]; + + if (*type == CLOCK_TYPE_PCMT16) + *divider_bits = 16; + else + *divider_bits = 8; + + return 0; +} + +enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) +{ + enum periphc_internal_id internal_id; + int type; + + if (!clock_periph_id_isvalid(periph_id)) + return CLOCK_ID_NONE; + + internal_id = periph_id_to_internal_id[periph_id]; + if (!periphc_internal_id_isvalid(internal_id)) + return CLOCK_ID_NONE; + + type = clock_periph_type[internal_id]; + if (!clock_type_id_isvalid(type)) + return CLOCK_ID_NONE; + + return clock_source[type][source]; +} + /** * Given a peripheral ID and the required source clock, this returns which * value should be programmed into the source mux for that peripheral. @@ -492,23 +537,10 @@ int get_periph_clock_source(enum periph_id periph_id, enum clock_id parent, int *mux_bits, int *divider_bits) { enum clock_type_id type; - enum periphc_internal_id internal_id; - int mux; + int mux, err; - assert(clock_periph_id_isvalid(periph_id)); - - internal_id = periph_id_to_internal_id[periph_id]; - assert(periphc_internal_id_isvalid(internal_id)); - - type = clock_periph_type[internal_id]; - assert(clock_type_id_isvalid(type)); - - *mux_bits = clock_source[type][CLOCK_MAX_MUX]; - - if (type == CLOCK_TYPE_PCMT16) - *divider_bits = 16; - else - *divider_bits = 8; + err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type); + assert(!err); for (mux = 0; mux < CLOCK_MAX_MUX; mux++) if (clock_source[type][mux] == parent) @@ -763,3 +795,26 @@ int tegra_plle_enable(void) return 0; } + +struct periph_clk_init periph_clk_init_table[] = { + { PERIPH_ID_SBC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC5, CLOCK_ID_PERIPH }, + { PERIPH_ID_SBC6, CLOCK_ID_PERIPH }, + { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH }, + { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL }, + { PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH }, + { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH }, + { PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ }, + { PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C1, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C2, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C3, CLOCK_ID_PERIPH }, + { PERIPH_ID_I2C4, CLOCK_ID_PERIPH }, + { -1, }, +}; diff --git a/board/Marvell/mvebu_db-88f3720/MAINTAINERS b/board/Marvell/mvebu_db-88f3720/MAINTAINERS new file mode 100644 index 0000000000..4e80917c72 --- /dev/null +++ b/board/Marvell/mvebu_db-88f3720/MAINTAINERS @@ -0,0 +1,6 @@ +MVEBU_DB_88F3720 BOARD +M: Stefan Roese <sr@denx.de> +S: Maintained +F: board/Marvell/mvebu_db-88f3720/ +F: include/configs/mvebu_db-88f3720.h +F: configs/mvebu_db-88f3720_defconfig diff --git a/board/Marvell/mvebu_db-88f3720/Makefile b/board/Marvell/mvebu_db-88f3720/Makefile new file mode 100644 index 0000000000..ed39738816 --- /dev/null +++ b/board/Marvell/mvebu_db-88f3720/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2016 Stefan Roese <sr@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := board.o diff --git a/board/Marvell/mvebu_db-88f3720/board.c b/board/Marvell/mvebu_db-88f3720/board.c new file mode 100644 index 0000000000..edf88c73e6 --- /dev/null +++ b/board/Marvell/mvebu_db-88f3720/board.c @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* IO expander I2C device */ +#define I2C_IO_EXP_ADDR 0x22 +#define I2C_IO_CFG_REG_0 0x6 +#define I2C_IO_DATA_OUT_REG_0 0x2 +#define I2C_IO_REG_0_SATA_OFF 2 +#define I2C_IO_REG_0_USB_H_OFF 1 + +int board_early_init_f(void) +{ + /* Nothing to do (yet), perhaps later some pin-muxing etc */ + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +/* Board specific AHCI / SATA enable code */ +int board_ahci_enable(void) +{ + struct udevice *dev; + int ret; + u8 buf[8]; + + /* Configure IO exander PCA9555: 7bit address 0x22 */ + ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); + if (ret) { + printf("Cannot find PCA9555: %d\n", ret); + return 0; + } + + ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + + /* + * Enable SATA power via IO expander connected via I2C by setting + * the corresponding bit to output mode to enable power for SATA + */ + buf[0] &= ~(1 << I2C_IO_REG_0_SATA_OFF); + ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + return 0; +} + +/* Board specific xHCI enable code */ +int board_xhci_enable(void) +{ + struct udevice *dev; + int ret; + u8 buf[8]; + + /* Configure IO exander PCA9555: 7bit address 0x22 */ + ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); + if (ret) { + printf("Cannot find PCA9555: %d\n", ret); + return 0; + } + + printf("Enable USB VBUS\n"); + + /* + * Read configuration (direction) and set VBUS pin as output + * (reset pin = output) + */ + ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + buf[0] &= ~(1 << I2C_IO_REG_0_USB_H_OFF); + ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + /* Read VBUS output value and disable it */ + ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + buf[0] &= ~(1 << I2C_IO_REG_0_USB_H_OFF); + ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + /* + * Required delay for configuration to settle - must wait for + * power on port is disabled in case VBUS signal was high, + * required 3 seconds delay to let VBUS signal fully settle down + */ + mdelay(3000); + + /* Enable VBUS power: Set output value of VBUS pin as enabled */ + buf[0] |= (1 << I2C_IO_REG_0_USB_H_OFF); + ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + mdelay(500); /* required delay to let output value settle */ + + return 0; +} diff --git a/board/Marvell/mvebu_db-88f7040/MAINTAINERS b/board/Marvell/mvebu_db-88f7040/MAINTAINERS new file mode 100644 index 0000000000..820461b213 --- /dev/null +++ b/board/Marvell/mvebu_db-88f7040/MAINTAINERS @@ -0,0 +1,6 @@ +MVEBU_DB_88F7040 BOARD +M: Stefan Roese <sr@denx.de> +S: Maintained +F: board/Marvell/mvebu_db-88f7040/ +F: include/configs/mvebu_db-88f7040.h +F: configs/mvebu_db-88f7040_defconfig diff --git a/board/Marvell/mvebu_db-88f7040/Makefile b/board/Marvell/mvebu_db-88f7040/Makefile new file mode 100644 index 0000000000..ed39738816 --- /dev/null +++ b/board/Marvell/mvebu_db-88f7040/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2016 Stefan Roese <sr@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := board.o diff --git a/board/Marvell/mvebu_db-88f7040/board.c b/board/Marvell/mvebu_db-88f7040/board.c new file mode 100644 index 0000000000..48bd55c372 --- /dev/null +++ b/board/Marvell/mvebu_db-88f7040/board.c @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* IO expander I2C device */ +#define I2C_IO_EXP_ADDR 0x21 +#define I2C_IO_CFG_REG_0 0x6 +#define I2C_IO_DATA_OUT_REG_0 0x2 +/* VBus enable */ +#define I2C_IO_REG_0_USB_H0_OFF 0 +#define I2C_IO_REG_0_USB_H1_OFF 1 +#define I2C_IO_REG_VBUS ((1 << I2C_IO_REG_0_USB_H0_OFF) | \ + (1 << I2C_IO_REG_0_USB_H1_OFF)) +/* Current limit */ +#define I2C_IO_REG_0_USB_H0_CL 4 +#define I2C_IO_REG_0_USB_H1_CL 5 +#define I2C_IO_REG_CL ((1 << I2C_IO_REG_0_USB_H0_CL) | \ + (1 << I2C_IO_REG_0_USB_H1_CL)) + +static int usb_enabled = 0; + +/* Board specific xHCI dis-/enable code */ + +/* + * Set USB VBUS signals (via I2C IO expander/GPIO) as output and set + * output value as disabled + * + * Set USB Current Limit signals (via I2C IO expander/GPIO) as output + * and set output value as enabled + */ +int board_xhci_config(void) +{ + struct udevice *dev; + int ret; + u8 buf[8]; + + /* Configure IO exander PCA9555: 7bit address 0x21 */ + ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); + if (ret) { + printf("Cannot find PCA9555: %d\n", ret); + return 0; + } + + /* + * Read configuration (direction) and set VBUS pin as output + * (reset pin = output) + */ + ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + buf[0] &= ~I2C_IO_REG_VBUS; + buf[0] &= ~I2C_IO_REG_CL; + ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + /* Read output value and configure it */ + ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + buf[0] &= ~I2C_IO_REG_VBUS; + buf[0] |= I2C_IO_REG_CL; + ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + mdelay(500); /* required delay to let output value settle */ + + return 0; +} + +int board_xhci_enable(void) +{ + struct udevice *dev; + int ret; + u8 buf[8]; + + /* + * This function enables all USB ports simultaniously, + * it only needs to get called once + */ + if (usb_enabled) + return 0; + + /* Configure IO exander PCA9555: 7bit address 0x21 */ + ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev); + if (ret) { + printf("Cannot find PCA9555: %d\n", ret); + return 0; + } + + /* Read VBUS output value */ + ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to read IO expander value via I2C\n"); + return -EIO; + } + + /* Enable VBUS power: Set output value of VBUS pin as enabled */ + buf[0] |= I2C_IO_REG_VBUS; + ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1); + if (ret) { + printf("Failed to set IO expander via I2C\n"); + return -EIO; + } + + mdelay(500); /* required delay to let output value settle */ + usb_enabled = 1; + + return 0; +} + +int board_early_init_f(void) +{ + /* Nothing to do (yet), perhaps later some pin-muxing etc */ + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +int board_late_init(void) +{ + /* Pre-configure the USB ports (overcurrent, VBus) */ + board_xhci_config(); + + return 0; +} diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index fc9c1c9b34..4e01deb02f 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -44,6 +44,12 @@ void pin_mux_mmc(void) void pin_mux_usb(void) { - /* For USB's GPIO PD0. For now, since we have no pinmux in fdt */ + /* For USB0's GPIO PD0. For now, since we have no pinmux in fdt */ pinmux_tristate_disable(PMUX_PINGRP_SLXK); + /* For USB1's ULPI signals */ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + pinmux_set_func(PMUX_PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PMUX_PINGRP_CDEV2); + /* USB1 PHY reset GPIO */ + pinmux_tristate_disable(PMUX_PINGRP_UAC); } diff --git a/cmd/Kconfig b/cmd/Kconfig index 9ed7976f58..86554ea362 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -404,6 +404,7 @@ config CMD_USB config CMD_DFU bool "dfu" + select USB_FUNCTION_DFU help Enables the command "dfu" which is used to have U-Boot create a DFU class device via USB. @@ -162,7 +162,7 @@ bad: return err; } -static int ubi_create_vol(char *volume, int64_t size, int dynamic) +static int ubi_create_vol(char *volume, int64_t size, int dynamic, int vol_id) { struct ubi_mkvol_req req; int err; @@ -172,7 +172,7 @@ static int ubi_create_vol(char *volume, int64_t size, int dynamic) else req.vol_type = UBI_STATIC_VOLUME; - req.vol_id = UBI_VOL_NUM_AUTO; + req.vol_id = vol_id; req.alignment = 1; req.bytes = size; @@ -577,10 +577,17 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (strncmp(argv[1], "create", 6) == 0) { int dynamic = 1; /* default: dynamic volume */ + int id = UBI_VOL_NUM_AUTO; /* Use maximum available size */ size = 0; + /* E.g., create volume size type vol_id */ + if (argc == 6) { + id = simple_strtoull(argv[5], NULL, 16); + argc--; + } + /* E.g., create volume size type */ if (argc == 5) { if (strncmp(argv[4], "s", 1) == 0) @@ -603,7 +610,7 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } /* E.g., create volume */ if (argc == 3) - return ubi_create_vol(argv[2], size, dynamic); + return ubi_create_vol(argv[2], size, dynamic, id); } if (strncmp(argv[1], "remove", 6) == 0) { @@ -684,7 +691,7 @@ U_BOOT_CMD( " - Display volume and ubi layout information\n" "ubi check volumename" " - check if volumename exists\n" - "ubi create[vol] volume [size] [type]" + "ubi create[vol] volume [size] [type] [id]" " - create volume name with size\n" "ubi write[vol] address volume size" " - Write volume from address with size\n" diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 64109a61ca..3191098bf1 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -22,6 +22,7 @@ CONFIG_SPL=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set +CONFIG_DFU_RAM=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 54343de7f3..56886226df 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -15,6 +15,7 @@ CONFIG_SPL=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set +CONFIG_DFU_RAM=y CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_AXP_ALDO3_VOLT=2800 diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index 296a0b57b0..65d0c9847a 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_DFU_RAM=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 9e44cf73d1..927ccd484b 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL=y CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set +CONFIG_DFU_RAM=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index b41bf67965..2a5f985dd3 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_DFU=y # CONFIG_CMD_FPGA is not set +CONFIG_DFU_RAM=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_GADGET=y diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index a3994f7bbd..2ef1aff0ec 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -34,6 +34,8 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_DFU_TFTP=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index 69ee177a86..15b33a4ae6 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -37,6 +37,8 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 86ebf0f7f6..67c458fa2b 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -33,6 +33,9 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2" +CONFIG_DFU_MMC=y +CONFIG_DFU_NAND=y +CONFIG_DFU_RAM=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 1a467c3b7f..38662b9e66 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -29,6 +29,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_NAND=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 98da63ff6f..7546033e59 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -24,6 +24,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index 00fa2aa7df..4a0770ec11 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -32,6 +32,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 9e10d5faee..006d58a6a4 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -31,6 +31,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_NAND=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index eb5b7fda7c..64e48e9604 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -35,6 +35,9 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIST="am437x-gp-evm am437x-sk-evm am43x-epos-evm am437x-idk-evm" CONFIG_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index bea1d0c3d9..4ed2ac39ac 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -30,6 +30,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 26872c234f..8ff94f9d43 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -26,6 +26,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SYS_NS16550=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index efe8be3abd..14d874f263 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -38,6 +38,9 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIST="am437x-gp-evm am437x-sk-evm am43x-epos-evm am437x-idk-evm" CONFIG_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 2a59a2b915..6c5b409682 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -38,6 +38,9 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index 882d409c78..a22e6b6593 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -27,6 +27,8 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_E1000=y CONFIG_PCI_TEGRA=y CONFIG_SYS_NS16550=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 28c1b2880e..503b8d14ae 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -30,6 +30,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_RTL8169=y diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig index 0b23941383..3e72b9b5ec 100644 --- a/configs/birdland_bav335a_defconfig +++ b/configs/birdland_bav335a_defconfig @@ -40,6 +40,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig index 8d590dfacf..28a27821b6 100644 --- a/configs/birdland_bav335b_defconfig +++ b/configs/birdland_bav335b_defconfig @@ -40,6 +40,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index ea515f21f3..fb7e2af309 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -30,6 +30,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_RTL8169=y diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig index 645923c969..5a053f5daa 100644 --- a/configs/cgtqmx6eval_defconfig +++ b/configs/cgtqmx6eval_defconfig @@ -37,6 +37,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SF=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 439bb19701..7c4d349b13 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y +CONFIG_DFU_MMC=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 4eb391634e..2745d8ba09 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -31,6 +31,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index bd0250a974..e9eabed60c 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -27,6 +27,8 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index c7fc7991f7..235f0042b4 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -26,6 +26,8 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_NAND=y CONFIG_DM_GPIO=y CONFIG_VYBRID_GPIO=y CONFIG_NAND_VF610_NFC=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index c486be0497..66d846ab79 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 9c7d3c9d40..2855af56d0 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -30,6 +30,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 64df49084e..c74dc18274 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -38,6 +38,9 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIST="dra7-evm dra72-evm" CONFIG_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 5fdc2b7e2f..29bea9ac0e 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -42,6 +42,9 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y CONFIG_OF_LIST="dra7-evm dra72-evm" CONFIG_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 6c432f31da..edd6c9bbc7 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -41,6 +41,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig index ca6705a492..7d0cb68d13 100644 --- a/configs/e2220-1170_defconfig +++ b/configs/e2220-1170_defconfig @@ -27,6 +27,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 6fc76bd57a..0a4aead473 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -41,6 +41,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 21b5747521..af913ac893 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -30,6 +30,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_RTL8169=y diff --git a/configs/mvebu_db-88f3720_defconfig b/configs/mvebu_db-88f3720_defconfig new file mode 100644 index 0000000000..813d0645d3 --- /dev/null +++ b/configs/mvebu_db-88f3720_defconfig @@ -0,0 +1,49 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_MVEBU_DB_88F3720=y +CONFIG_DEFAULT_DEVICE_TREE="armada-3720-db" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_BLOCK_CACHE=y +CONFIG_DM_I2C=y +CONFIG_DM_I2C_COMPAT=y +CONFIG_MISC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_MVEBU_A3700_UART=y +CONFIG_DEBUG_UART_BASE=0xd0012000 +CONFIG_DEBUG_UART_CLOCK=25804800 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_MVEBU_A3700_UART=y +CONFIG_MVEBU_A3700_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/mvebu_db-88f7040_defconfig b/configs/mvebu_db-88f7040_defconfig new file mode 100644 index 0000000000..4d68bdc7bb --- /dev/null +++ b/configs/mvebu_db-88f7040_defconfig @@ -0,0 +1,47 @@ +CONFIG_ARM=y +CONFIG_ARCH_MVEBU=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_TARGET_MVEBU_DB_88F7040=y +CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_BLOCK_CACHE=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_MISC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_MVEBU_COMPHY_SUPPORT=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xf0512000 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig index 5f4b979316..f9fda50731 100644 --- a/configs/mx6dlsabreauto_defconfig +++ b/configs/mx6dlsabreauto_defconfig @@ -23,6 +23,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 300e9d9574..dc28694736 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -23,6 +23,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y diff --git a/configs/mx6qpsabreauto_defconfig b/configs/mx6qpsabreauto_defconfig index 891f819637..c34d834bec 100644 --- a/configs/mx6qpsabreauto_defconfig +++ b/configs/mx6qpsabreauto_defconfig @@ -22,6 +22,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig index 08c9bb73ce..bf4c46515d 100644 --- a/configs/mx6qsabreauto_defconfig +++ b/configs/mx6qsabreauto_defconfig @@ -23,6 +23,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index 2bfdd536d3..d1385c759f 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -23,6 +23,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig index 8eac2b7d52..320355154a 100644 --- a/configs/mx7dsabresd_defconfig +++ b/configs/mx7dsabresd_defconfig @@ -29,6 +29,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y diff --git a/configs/mx7dsabresd_secure_defconfig b/configs/mx7dsabresd_secure_defconfig index 0a43134f64..cf12cef67f 100644 --- a/configs/mx7dsabresd_secure_defconfig +++ b/configs/mx7dsabresd_secure_defconfig @@ -29,6 +29,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 26ee388b9b..b1f9993d5d 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -36,6 +36,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_CROS_EC_KEYB=y CONFIG_CMD_CROS_EC=y CONFIG_CROS_EC=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index af2e4f7161..81644845c6 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ADC=y CONFIG_ADC_EXYNOS=y +CONFIG_DFU_MMC=y CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_DM_PMIC=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index 4e47032aba..76d09680b6 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -32,6 +32,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DFU_MMC=y CONFIG_DM_I2C=y CONFIG_DM_I2C_COMPAT=y CONFIG_DM_PMIC=y diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index ed0917ba13..63ff1bcc8e 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -24,6 +24,8 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_DWC3=y diff --git a/configs/origen_defconfig b/configs/origen_defconfig index 0eff767c8d..d667b0f3ec 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig index 7a6b82323e..69fc1ba778 100644 --- a/configs/p2371-0000_defconfig +++ b/configs/p2371-0000_defconfig @@ -28,6 +28,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index 180dde37fa..6ccd7a37e3 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -28,6 +28,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_RTL8169=y diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig index fa6ca239cd..1fd464964f 100644 --- a/configs/p2571_defconfig +++ b/configs/p2571_defconfig @@ -28,6 +28,9 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index a111899951..1aaf86872b 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -22,6 +22,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 35fd2e8f06..8b9a890dfc 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -43,6 +43,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 8664cab42e..d9b594b121 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -41,6 +41,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index dde3747f84..1cf5a5f342 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -43,6 +43,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index b381e215f2..cacc443851 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DWC2_OTG=y diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index 5eb7a40e90..1f14566b69 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 12cc9b62e7..806caca122 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -35,6 +35,8 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 68ede036cf..64173c7739 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -27,6 +27,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index 71708796e2..d8611bd95c 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_SYS_I2C_DW=y diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index e523176bcb..42b71c3afa 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_SYS_I2C_DW=y diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig index a22c0227aa..f38e3761f1 100644 --- a/configs/socfpga_de0_nano_soc_defconfig +++ b/configs/socfpga_de0_nano_soc_defconfig @@ -33,6 +33,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_SYS_I2C_DW=y diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index 4e6b3d4cb1..4041b68b49 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -33,6 +33,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_SYS_I2C_DW=y diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig index 3879cc9aae..58dc5b0116 100644 --- a/configs/socfpga_sockit_defconfig +++ b/configs/socfpga_sockit_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_SYS_I2C_DW=y diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index d763b993bb..42af4ba5a1 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -35,6 +35,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_SYS_I2C_DW=y diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index e9105b9b79..d83f1e57c3 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -37,6 +37,9 @@ CONFIG_CMD_UBI=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index c84809f11d..17d4a027c1 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -30,6 +30,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index ed36d7384f..ba8c6734e7 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -41,6 +41,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_DFU_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 1362ffb7b8..59b73ca7d5 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 525bbefa14..277365424d 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -28,6 +28,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index bd6c96c927..358fc8f5cc 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -30,6 +30,9 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_SPL_DM=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_DFU_SF=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SYS_NS16550=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 8288c86006..56e7ba367d 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -34,6 +34,8 @@ CONFIG_PWM_TEGRA=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_VIDEO_TEGRA20=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index 4df7ea6075..0f0ec99e50 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -23,6 +23,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y diff --git a/configs/warp7_secure_defconfig b/configs/warp7_secure_defconfig index b6458d1874..c12fc01ce0 100644 --- a/configs/warp7_secure_defconfig +++ b/configs/warp7_secure_defconfig @@ -24,6 +24,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y diff --git a/configs/warp_defconfig b/configs/warp_defconfig index f5c5600ccf..08eb181a03 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -22,6 +22,7 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DFU_MMC=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig index bd8b906a64..3be5c1b80b 100644 --- a/configs/xilinx_zynqmp_ep_defconfig +++ b/configs/xilinx_zynqmp_ep_defconfig @@ -47,6 +47,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y +CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index 6afacd2d91..44eaf20b00 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -38,6 +38,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y +CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig index 4068c28818..6fcbaa1110 100644 --- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig @@ -41,6 +41,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y +CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y diff --git a/configs/xilinx_zynqmp_zcu102_defconfig b/configs/xilinx_zynqmp_zcu102_defconfig index 90b5ff6c76..3f4b5f9579 100644 --- a/configs/xilinx_zynqmp_zcu102_defconfig +++ b/configs/xilinx_zynqmp_zcu102_defconfig @@ -39,6 +39,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y +CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 5a0d686931..2d5fa50507 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -39,6 +39,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y +CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 8726e7bed6..ad0da0b238 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -28,6 +28,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_ZYNQ_SDHCI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 8ae7b591e6..3142b58796 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -24,6 +24,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_ZYNQ_SDHCI=y CONFIG_ZYNQ_GEM=y CONFIG_USB=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 9f5acbf658..c4f065f6b9 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -30,6 +30,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_ZYNQ_SDHCI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 1a44c20af7..e1db0a7485 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -30,6 +30,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_ZYNQ_SDHCI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 0f4e30884a..c930b53b9e 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -28,6 +28,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_ZYNQ_SDHCI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index e5ecb79212..f2c0f72a76 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -30,6 +30,8 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y CONFIG_ZYNQ_SDHCI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/drivers/Kconfig b/drivers/Kconfig index 4c555a0c1f..e8c9e0a326 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -48,6 +48,8 @@ source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" +source "drivers/phy/marvell/Kconfig" + source "drivers/pinctrl/Kconfig" source "drivers/power/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index ca98273134..761d0b3e85 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -70,6 +70,7 @@ obj-y += misc/ obj-y += pcmcia/ obj-y += dfu/ obj-$(CONFIG_X86) += pch/ +obj-y += phy/marvell/ obj-y += rtc/ obj-y += sound/ obj-y += spmi/ diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 2e1ddf9dac..5139989d0b 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -45,7 +45,7 @@ u16 *ataid[AHCI_MAX_PORTS]; #define WAIT_MS_FLUSH 5000 #define WAIT_MS_LINKUP 200 -static inline void __iomem *ahci_port_base(void __iomem *base, u32 port) +__weak void __iomem *ahci_port_base(void __iomem *base, u32 port) { return base + 0x100 + (port * 0x80); } diff --git a/drivers/clk/tegra/Kconfig b/drivers/clk/tegra/Kconfig index 659fe022c2..ce80b1ff3e 100644 --- a/drivers/clk/tegra/Kconfig +++ b/drivers/clk/tegra/Kconfig @@ -1,3 +1,10 @@ +config TEGRA_CAR_CLOCK + bool "Enable Tegra CAR-based clock driver" + depends on TEGRA_CAR + help + Enable support for manipulating Tegra's on-SoC clocks via direct + register access to the Tegra CAR (Clock And Reset controller). + config TEGRA186_CLOCK bool "Enable Tegra186 BPMP-based clock driver" depends on TEGRA186_BPMP diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile index f32998ccc2..0fcc5205a7 100644 --- a/drivers/clk/tegra/Makefile +++ b/drivers/clk/tegra/Makefile @@ -2,4 +2,5 @@ # # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_TEGRA_CAR_CLOCK) += tegra-car-clk.o obj-$(CONFIG_TEGRA186_CLOCK) += tegra186-clk.o diff --git a/drivers/clk/tegra/tegra-car-clk.c b/drivers/clk/tegra/tegra-car-clk.c new file mode 100644 index 0000000000..b8a2c82a25 --- /dev/null +++ b/drivers/clk/tegra/tegra-car-clk.c @@ -0,0 +1,103 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/clk_rst.h> + +static int tegra_car_clk_request(struct clk *clk) +{ + debug("%s(clk=%p) (dev=%p, id=%lu)\n", __func__, clk, clk->dev, + clk->id); + + /* + * Note that the first PERIPH_ID_COUNT clock IDs (where the value + * varies per SoC) are the peripheral clocks, which use a numbering + * scheme that matches HW registers 1:1. There are other clock IDs + * beyond this that are assigned arbitrarily by the Tegra CAR DT + * binding. Due to the implementation of this driver, it currently + * only supports the peripheral IDs. + */ + if (clk->id >= PERIPH_ID_COUNT) + return -EINVAL; + + return 0; +} + +static int tegra_car_clk_free(struct clk *clk) +{ + debug("%s(clk=%p) (dev=%p, id=%lu)\n", __func__, clk, clk->dev, + clk->id); + + return 0; +} + +static ulong tegra_car_clk_get_rate(struct clk *clk) +{ + enum clock_id parent; + + debug("%s(clk=%p) (dev=%p, id=%lu)\n", __func__, clk, clk->dev, + clk->id); + + parent = clock_get_periph_parent(clk->id); + return clock_get_periph_rate(clk->id, parent); +} + +static ulong tegra_car_clk_set_rate(struct clk *clk, ulong rate) +{ + enum clock_id parent; + + debug("%s(clk=%p, rate=%lu) (dev=%p, id=%lu)\n", __func__, clk, rate, + clk->dev, clk->id); + + parent = clock_get_periph_parent(clk->id); + return clock_adjust_periph_pll_div(clk->id, parent, rate, NULL); +} + +static int tegra_car_clk_enable(struct clk *clk) +{ + debug("%s(clk=%p) (dev=%p, id=%lu)\n", __func__, clk, clk->dev, + clk->id); + + clock_enable(clk->id); + + return 0; +} + +static int tegra_car_clk_disable(struct clk *clk) +{ + debug("%s(clk=%p) (dev=%p, id=%lu)\n", __func__, clk, clk->dev, + clk->id); + + clock_disable(clk->id); + + return 0; +} + +static struct clk_ops tegra_car_clk_ops = { + .request = tegra_car_clk_request, + .free = tegra_car_clk_free, + .get_rate = tegra_car_clk_get_rate, + .set_rate = tegra_car_clk_set_rate, + .enable = tegra_car_clk_enable, + .disable = tegra_car_clk_disable, +}; + +static int tegra_car_clk_probe(struct udevice *dev) +{ + debug("%s(dev=%p)\n", __func__, dev); + + return 0; +} + +U_BOOT_DRIVER(tegra_car_clk) = { + .name = "tegra_car_clk", + .id = UCLASS_CLK, + .probe = tegra_car_clk_probe, + .ops = &tegra_car_clk_ops, +}; diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig index 6b92064f0b..56a98f5273 100644 --- a/drivers/dfu/Kconfig +++ b/drivers/dfu/Kconfig @@ -1,5 +1,9 @@ menu "DFU support" +config USB_FUNCTION_DFU + bool + +if CMD_DFU config DFU_TFTP bool "DFU via TFTP" help @@ -7,4 +11,28 @@ config DFU_TFTP sent via TFTP boot. Detailed description of this feature can be found at ./doc/README.dfutftp + +config DFU_MMC + bool "MMC back end for DFU" + help + This option enables using DFU to read and write to MMC based storage. + +config DFU_NAND + bool "NAND back end for DFU" + help + This option enables using DFU to read and write to NAND based + storage. + +config DFU_RAM + bool "RAM back end for DFU" + help + This option enables using DFU to read and write RAM on the target. + +config DFU_SF + bool "SPI flash back end for DFU" + help + This option enables using DFU to read and write to SPI flash based + storage. + +endif endmenu diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index 0dbcc5a1cf..898f12a946 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -12,27 +12,15 @@ #include <fdtdec.h> #include <i2c.h> #include <asm/io.h> -#ifdef CONFIG_TEGRA186 #include <clk.h> #include <reset.h> -#else +#ifndef CONFIG_TEGRA186 #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> -#include <asm/arch/pinmux.h> -#include <asm/arch-tegra/clk_rst.h> #endif #include <asm/arch/gpio.h> #include <asm/arch-tegra/tegra_i2c.h> -/* - * FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that - * should not be present. These are needed because newer Tegra SoCs support - * only the standard clock/reset APIs, whereas older Tegra SoCs support only - * a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be - * fixed to implement the standard APIs, and all drivers converted to solely - * use the new standard APIs, with no ifdefs. - */ - DECLARE_GLOBAL_DATA_PTR; enum i2c_type { @@ -44,12 +32,8 @@ enum i2c_type { /* Information about i2c controller */ struct i2c_bus { int id; -#ifdef CONFIG_TEGRA186 struct reset_ctl reset_ctl; struct clk clk; -#else - enum periph_id periph_id; -#endif int speed; int pinmux_config; struct i2c_control *control; @@ -81,20 +65,15 @@ static void set_packet_mode(struct i2c_bus *i2c_bus) static void i2c_reset_controller(struct i2c_bus *i2c_bus) { /* Reset I2C controller. */ -#ifdef CONFIG_TEGRA186 reset_assert(&i2c_bus->reset_ctl); udelay(1); reset_deassert(&i2c_bus->reset_ctl); udelay(1); -#else - reset_periph(i2c_bus->periph_id, 1); -#endif /* re-program config register to packet mode */ set_packet_mode(i2c_bus); } -#ifdef CONFIG_TEGRA186 static int i2c_init_clock(struct i2c_bus *i2c_bus, unsigned rate) { int ret; @@ -114,7 +93,6 @@ static int i2c_init_clock(struct i2c_bus *i2c_bus, unsigned rate) return 0; } -#endif static void i2c_init_controller(struct i2c_bus *i2c_bus) { @@ -126,12 +104,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) * here, in section 23.3.1, but in fact we seem to need a factor of * 16 to get the right frequency. */ -#ifdef CONFIG_TEGRA186 i2c_init_clock(i2c_bus, i2c_bus->speed * 2 * 8); -#else - clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, - i2c_bus->speed * 2 * 8); -#endif if (i2c_bus->type == TYPE_114) { /* @@ -151,12 +124,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__, clk_div_stdfst_mode); -#ifdef CONFIG_TEGRA186 i2c_init_clock(i2c_bus, rate); -#else - clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, - rate); -#endif } /* Reset I2C controller. */ @@ -170,7 +138,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) } #ifndef CONFIG_TEGRA186 - funcmux_select(i2c_bus->periph_id, i2c_bus->pinmux_config); + funcmux_select(i2c_bus->clk.id, i2c_bus->pinmux_config); #endif } @@ -392,23 +360,13 @@ static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed) static int tegra_i2c_probe(struct udevice *dev) { struct i2c_bus *i2c_bus = dev_get_priv(dev); -#ifdef CONFIG_TEGRA186 int ret; -#else - const void *blob = gd->fdt_blob; - int node = dev->of_offset; -#endif bool is_dvc; i2c_bus->id = dev->seq; i2c_bus->type = dev_get_driver_data(dev); i2c_bus->regs = (struct i2c_ctlr *)dev_get_addr(dev); - /* - * We don't have a binding for pinmux yet. Leave it out for now. So - * far no one needs anything other than the default. - */ -#ifdef CONFIG_TEGRA186 ret = reset_get_by_name(dev, "i2c", &i2c_bus->reset_ctl); if (ret) { error("reset_get_by_name() failed: %d\n", ret); @@ -419,9 +377,13 @@ static int tegra_i2c_probe(struct udevice *dev) error("clk_get_by_name() failed: %d\n", ret); return ret; } -#else + +#ifndef CONFIG_TEGRA186 + /* + * We don't have a binding for pinmux yet. Leave it out for now. So + * far no one needs anything other than the default. + */ i2c_bus->pinmux_config = FUNCMUX_DEFAULT; - i2c_bus->periph_id = clock_decode_periph_id(blob, node); /* * We can't specify the pinmux config in the fdt, so I2C2 will not @@ -429,11 +391,9 @@ static int tegra_i2c_probe(struct udevice *dev) * You could add in this little hack if you need to use it. * The correct solution is a pinmux binding in the fdt. * - * if (i2c_bus->periph_id == PERIPH_ID_I2C2) + * if (i2c_bus->clk.id == PERIPH_ID_I2C2) * i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA; */ - if (i2c_bus->periph_id == -1) - return -EINVAL; #endif is_dvc = dev_get_driver_data(dev) == TYPE_DVC; @@ -444,14 +404,8 @@ static int tegra_i2c_probe(struct udevice *dev) i2c_bus->control = &i2c_bus->regs->control; } i2c_init_controller(i2c_bus); - debug("%s: controller bus %d at %p, periph_id %d, speed %d: ", - is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs, -#ifndef CONFIG_TEGRA186 - i2c_bus->periph_id, -#else - -1, -#endif - i2c_bus->speed); + debug("%s: controller bus %d at %p, speed %d: ", + is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs, i2c_bus->speed); return 0; } diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 8990489835..1aae4bcd07 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -129,6 +129,13 @@ config PCA9551_I2C_ADDR help The I2C address of the PCA9551 LED controller. +config TEGRA_CAR + bool "Enable support for the Tegra CAR driver" + depends on TEGRA_NO_BPMP + help + The Tegra CAR (Clock and Reset Controller) is a HW module that + controls almost all clocks and resets in a Tegra SoC. + config TEGRA186_BPMP bool "Enable support for the Tegra186 BPMP driver" depends on TEGRA186 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index e4f246465a..9fbb5a7880 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_SANDBOX) += spltest_sandbox.o endif endif obj-$(CONFIG_SANDBOX) += syscon_sandbox.o +obj-$(CONFIG_TEGRA_CAR) += tegra_car.o obj-$(CONFIG_TEGRA186_BPMP) += tegra186_bpmp.o obj-$(CONFIG_TWL4030_LED) += twl4030_led.o obj-$(CONFIG_FSL_IFC) += fsl_ifc.o diff --git a/drivers/misc/tegra_car.c b/drivers/misc/tegra_car.c new file mode 100644 index 0000000000..0eb009657c --- /dev/null +++ b/drivers/misc/tegra_car.c @@ -0,0 +1,68 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/root.h> + +/** + * The CAR exposes multiple different services. We create a sub-device for + * each separate type of service, since each device must be of the appropriate + * UCLASS. + */ +static int tegra_car_bpmp_bind(struct udevice *dev) +{ + int ret; + struct udevice *child; + + debug("%s(dev=%p)\n", __func__, dev); + + ret = device_bind_driver_to_node(dev, "tegra_car_clk", "tegra_car_clk", + dev->of_offset, &child); + if (ret) + return ret; + + ret = device_bind_driver_to_node(dev, "tegra_car_reset", + "tegra_car_reset", dev->of_offset, + &child); + if (ret) + return ret; + + return 0; +} + +static int tegra_car_bpmp_probe(struct udevice *dev) +{ + debug("%s(dev=%p)\n", __func__, dev); + + return 0; +} + +static int tegra_car_bpmp_remove(struct udevice *dev) +{ + debug("%s(dev=%p)\n", __func__, dev); + + return 0; +} + +static const struct udevice_id tegra_car_bpmp_ids[] = { + { .compatible = "nvidia,tegra20-car" }, + { .compatible = "nvidia,tegra30-car" }, + { .compatible = "nvidia,tegra114-car" }, + { .compatible = "nvidia,tegra124-car" }, + { .compatible = "nvidia,tegra210-car" }, + { } +}; + +U_BOOT_DRIVER(tegra_car_bpmp) = { + .name = "tegra_car", + .id = UCLASS_MISC, + .of_match = tegra_car_bpmp_ids, + .bind = tegra_car_bpmp_bind, + .probe = tegra_car_bpmp_probe, + .remove = tegra_car_bpmp_remove, +}; diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index 3d0845e317..97b1154595 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -2,7 +2,7 @@ * (C) Copyright 2009 SAMSUNG Electronics * Minkyu Kang <mk7.kang@samsung.com> * Jaehoon Chung <jh80.chung@samsung.com> - * Portions Copyright 2011-2015 NVIDIA Corporation + * Portions Copyright 2011-2016 NVIDIA Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -13,32 +13,26 @@ #include <errno.h> #include <asm/gpio.h> #include <asm/io.h> -#ifndef CONFIG_TEGRA186 -#include <asm/arch/clock.h> -#include <asm/arch-tegra/clk_rst.h> -#endif -#include <asm/arch-tegra/mmc.h> #include <asm/arch-tegra/tegra_mmc.h> #include <mmc.h> -/* - * FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that - * should not be present. These are needed because newer Tegra SoCs support - * only the standard clock/reset APIs, whereas older Tegra SoCs support only - * a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be - * fixed to implement the standard APIs, and all drivers converted to solely - * use the new standard APIs, with no ifdefs. - */ - DECLARE_GLOBAL_DATA_PTR; -struct mmc_host mmc_host[CONFIG_SYS_MMC_MAX_DEVICE]; - -#if !CONFIG_IS_ENABLED(OF_CONTROL) -#error "Please enable device tree support to use this driver" -#endif +struct tegra_mmc_priv { + struct tegra_mmc *reg; + struct reset_ctl reset_ctl; + struct clk clk; + struct gpio_desc cd_gpio; /* Change Detect GPIO */ + struct gpio_desc pwr_gpio; /* Power GPIO */ + struct gpio_desc wp_gpio; /* Write Protect GPIO */ + unsigned int version; /* SDHCI spec. version */ + unsigned int clock; /* Current clock (MHz) */ + struct mmc_config cfg; /* mmc configuration */ + struct mmc *mmc; +}; -static void mmc_set_power(struct mmc_host *host, unsigned short power) +static void tegra_mmc_set_power(struct tegra_mmc_priv *priv, + unsigned short power) { u8 pwr = 0; debug("%s: power = %x\n", __func__, power); @@ -61,17 +55,18 @@ static void mmc_set_power(struct mmc_host *host, unsigned short power) debug("%s: pwr = %X\n", __func__, pwr); /* Set the bus voltage first (if any) */ - writeb(pwr, &host->reg->pwrcon); + writeb(pwr, &priv->reg->pwrcon); if (pwr == 0) return; /* Now enable bus power */ pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER; - writeb(pwr, &host->reg->pwrcon); + writeb(pwr, &priv->reg->pwrcon); } -static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data, - struct bounce_buffer *bbstate) +static void tegra_mmc_prepare_data(struct tegra_mmc_priv *priv, + struct mmc_data *data, + struct bounce_buffer *bbstate) { unsigned char ctrl; @@ -80,7 +75,7 @@ static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data, bbstate->bounce_buffer, bbstate->user_buffer, data->blocks, data->blocksize); - writel((u32)(unsigned long)bbstate->bounce_buffer, &host->reg->sysad); + writel((u32)(unsigned long)bbstate->bounce_buffer, &priv->reg->sysad); /* * DMASEL[4:3] * 00 = Selects SDMA @@ -88,17 +83,18 @@ static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data, * 10 = Selects 32-bit Address ADMA2 * 11 = Selects 64-bit Address ADMA2 */ - ctrl = readb(&host->reg->hostctl); + ctrl = readb(&priv->reg->hostctl); ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK; ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA; - writeb(ctrl, &host->reg->hostctl); + writeb(ctrl, &priv->reg->hostctl); /* We do not handle DMA boundaries, so set it to max (512 KiB) */ - writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize); - writew(data->blocks, &host->reg->blkcnt); + writew((7 << 12) | (data->blocksize & 0xFFF), &priv->reg->blksize); + writew(data->blocks, &priv->reg->blkcnt); } -static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) +static void tegra_mmc_set_transfer_mode(struct tegra_mmc_priv *priv, + struct mmc_data *data) { unsigned short mode; debug(" mmc_set_transfer_mode called\n"); @@ -121,13 +117,13 @@ static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ; - writew(mode, &host->reg->trnmod); + writew(mode, &priv->reg->trnmod); } -static int mmc_wait_inhibit(struct mmc_host *host, - struct mmc_cmd *cmd, - struct mmc_data *data, - unsigned int timeout) +static int tegra_mmc_wait_inhibit(struct tegra_mmc_priv *priv, + struct mmc_cmd *cmd, + struct mmc_data *data, + unsigned int timeout) { /* * PRNSTS @@ -143,7 +139,7 @@ static int mmc_wait_inhibit(struct mmc_host *host, if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY)) mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT; - while (readl(&host->reg->prnsts) & mask) { + while (readl(&priv->reg->prnsts) & mask) { if (timeout == 0) { printf("%s: timeout error\n", __func__); return -1; @@ -155,29 +151,30 @@ static int mmc_wait_inhibit(struct mmc_host *host, return 0; } -static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data, struct bounce_buffer *bbstate) +static int tegra_mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data, + struct bounce_buffer *bbstate) { - struct mmc_host *host = mmc->priv; + struct tegra_mmc_priv *priv = mmc->priv; int flags, i; int result; unsigned int mask = 0; unsigned int retry = 0x100000; debug(" mmc_send_cmd called\n"); - result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */); + result = tegra_mmc_wait_inhibit(priv, cmd, data, 10 /* ms */); if (result < 0) return result; if (data) - mmc_prepare_data(host, data, bbstate); + tegra_mmc_prepare_data(priv, data, bbstate); debug("cmd->arg: %08x\n", cmd->cmdarg); - writel(cmd->cmdarg, &host->reg->argument); + writel(cmd->cmdarg, &priv->reg->argument); if (data) - mmc_set_transfer_mode(host, data); + tegra_mmc_set_transfer_mode(priv, data); if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) return -1; @@ -212,33 +209,33 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, debug("cmd: %d\n", cmd->cmdidx); - writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg); + writew((cmd->cmdidx << 8) | flags, &priv->reg->cmdreg); for (i = 0; i < retry; i++) { - mask = readl(&host->reg->norintsts); + mask = readl(&priv->reg->norintsts); /* Command Complete */ if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) { if (!data) - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); break; } } if (i == retry) { printf("%s: waiting for status update\n", __func__); - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); return -ETIMEDOUT; } if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) { /* Timeout Error */ debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx); - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); return -ETIMEDOUT; } else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) { /* Error Interrupt */ debug("error: %08x cmd %d\n", mask, cmd->cmdidx); - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); return -1; } @@ -246,8 +243,8 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, if (cmd->resp_type & MMC_RSP_136) { /* CRC is stripped so we need to do some shifting. */ for (i = 0; i < 4; i++) { - unsigned long offset = - (unsigned long)(&host->reg->rspreg3 - i); + unsigned long offset = (unsigned long) + (&priv->reg->rspreg3 - i); cmd->response[i] = readl(offset) << 8; if (i != 3) { @@ -260,21 +257,21 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, } else if (cmd->resp_type & MMC_RSP_BUSY) { for (i = 0; i < retry; i++) { /* PRNTDATA[23:20] : DAT[3:0] Line Signal */ - if (readl(&host->reg->prnsts) + if (readl(&priv->reg->prnsts) & (1 << 20)) /* DAT[0] */ break; } if (i == retry) { printf("%s: card is still busy\n", __func__); - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); return -ETIMEDOUT; } - cmd->response[0] = readl(&host->reg->rspreg0); + cmd->response[0] = readl(&priv->reg->rspreg0); debug("cmd->resp[0]: %08x\n", cmd->response[0]); } else { - cmd->response[0] = readl(&host->reg->rspreg0); + cmd->response[0] = readl(&priv->reg->rspreg0); debug("cmd->resp[0]: %08x\n", cmd->response[0]); } } @@ -283,11 +280,11 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, unsigned long start = get_timer(0); while (1) { - mask = readl(&host->reg->norintsts); + mask = readl(&priv->reg->norintsts); if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) { /* Error Interrupt */ - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); printf("%s: error during transfer: 0x%08x\n", __func__, mask); return -1; @@ -296,31 +293,31 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, * DMA Interrupt, restart the transfer where * it was interrupted. */ - unsigned int address = readl(&host->reg->sysad); + unsigned int address = readl(&priv->reg->sysad); debug("DMA end\n"); writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT, - &host->reg->norintsts); - writel(address, &host->reg->sysad); + &priv->reg->norintsts); + writel(address, &priv->reg->sysad); } else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) { /* Transfer Complete */ debug("r/w is done\n"); break; } else if (get_timer(start) > 8000UL) { - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); printf("%s: MMC Timeout\n" " Interrupt status 0x%08x\n" " Interrupt status enable 0x%08x\n" " Interrupt signal enable 0x%08x\n" " Present status 0x%08x\n", __func__, mask, - readl(&host->reg->norintstsen), - readl(&host->reg->norintsigen), - readl(&host->reg->prnsts)); + readl(&priv->reg->norintstsen), + readl(&priv->reg->norintsigen), + readl(&priv->reg->prnsts)); return -1; } } - writel(mask, &host->reg->norintsts); + writel(mask, &priv->reg->norintsts); } udelay(1000); @@ -328,7 +325,7 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, } static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) + struct mmc_data *data) { void *buf; unsigned int bbflags; @@ -349,7 +346,7 @@ static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, bounce_buffer_start(&bbstate, buf, len, bbflags); } - ret = mmc_send_cmd_bounced(mmc, cmd, data, &bbstate); + ret = tegra_mmc_send_cmd_bounced(mmc, cmd, data, &bbstate); if (data) bounce_buffer_stop(&bbstate); @@ -357,8 +354,9 @@ static int tegra_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, return ret; } -static void mmc_change_clock(struct mmc_host *host, uint clock) +static void tegra_mmc_change_clock(struct tegra_mmc_priv *priv, uint clock) { + ulong rate; int div; unsigned short clk; unsigned long timeout; @@ -370,18 +368,12 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) */ if (clock == 0) goto out; -#ifdef CONFIG_TEGRA186 - { - ulong rate = clk_set_rate(&host->clk, clock); - div = (rate + clock - 1) / clock; - } -#else - clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock, - &div); -#endif + + rate = clk_set_rate(&priv->clk, clock); + div = (rate + clock - 1) / clock; debug("div = %d\n", div); - writew(0, &host->reg->clkcon); + writew(0, &priv->reg->clkcon); /* * CLKCON @@ -393,11 +385,11 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) div >>= 1; clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) | TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE); - writew(clk, &host->reg->clkcon); + writew(clk, &priv->reg->clkcon); /* Wait max 10 ms */ timeout = 10; - while (!(readw(&host->reg->clkcon) & + while (!(readw(&priv->reg->clkcon) & TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) { if (timeout == 0) { printf("%s: timeout error\n", __func__); @@ -408,26 +400,26 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) } clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE; - writew(clk, &host->reg->clkcon); + writew(clk, &priv->reg->clkcon); debug("mmc_change_clock: clkcon = %08X\n", clk); out: - host->clock = clock; + priv->clock = clock; } static void tegra_mmc_set_ios(struct mmc *mmc) { - struct mmc_host *host = mmc->priv; + struct tegra_mmc_priv *priv = mmc->priv; unsigned char ctrl; debug(" mmc_set_ios called\n"); debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock); /* Change clock first */ - mmc_change_clock(host, mmc->clock); + tegra_mmc_change_clock(priv, mmc->clock); - ctrl = readb(&host->reg->hostctl); + ctrl = readb(&priv->reg->hostctl); /* * WIDE8[5] @@ -444,11 +436,38 @@ static void tegra_mmc_set_ios(struct mmc *mmc) else ctrl &= ~(1 << 1); - writeb(ctrl, &host->reg->hostctl); + writeb(ctrl, &priv->reg->hostctl); debug("mmc_set_ios: hostctl = %08X\n", ctrl); } -static void mmc_reset(struct mmc_host *host, struct mmc *mmc) +static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv) +{ +#if defined(CONFIG_TEGRA30) + u32 val; + + debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)priv->reg); + + /* Set the pad drive strength for SDMMC1 or 3 only */ + if (priv->reg != (void *)0x78000000 && + priv->reg != (void *)0x78000400) { + debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", + __func__); + return; + } + + val = readl(&priv->reg->sdmemcmppadctl); + val &= 0xFFFFFFF0; + val |= MEMCOMP_PADCTRL_VREF; + writel(val, &priv->reg->sdmemcmppadctl); + + val = readl(&priv->reg->autocalcfg); + val &= 0xFFFF0000; + val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; + writel(val, &priv->reg->autocalcfg); +#endif +} + +static void tegra_mmc_reset(struct tegra_mmc_priv *priv, struct mmc *mmc) { unsigned int timeout; debug(" mmc_reset called\n"); @@ -458,15 +477,15 @@ static void mmc_reset(struct mmc_host *host, struct mmc *mmc) * 1 = reset * 0 = work */ - writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst); + writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &priv->reg->swrst); - host->clock = 0; + priv->clock = 0; /* Wait max 100 ms */ timeout = 100; /* hw clears the bit when it's done */ - while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) { + while (readb(&priv->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) { if (timeout == 0) { printf("%s: timeout error\n", __func__); return; @@ -476,30 +495,30 @@ static void mmc_reset(struct mmc_host *host, struct mmc *mmc) } /* Set SD bus voltage & enable bus power */ - mmc_set_power(host, fls(mmc->cfg->voltages) - 1); + tegra_mmc_set_power(priv, fls(mmc->cfg->voltages) - 1); debug("%s: power control = %02X, host control = %02X\n", __func__, - readb(&host->reg->pwrcon), readb(&host->reg->hostctl)); + readb(&priv->reg->pwrcon), readb(&priv->reg->hostctl)); /* Make sure SDIO pads are set up */ - pad_init_mmc(host); + tegra_mmc_pad_init(priv); } -static int tegra_mmc_core_init(struct mmc *mmc) +static int tegra_mmc_init(struct mmc *mmc) { - struct mmc_host *host = mmc->priv; + struct tegra_mmc_priv *priv = mmc->priv; unsigned int mask; - debug(" mmc_core_init called\n"); + debug(" tegra_mmc_init called\n"); - mmc_reset(host, mmc); + tegra_mmc_reset(priv, mmc); - host->version = readw(&host->reg->hcver); - debug("host version = %x\n", host->version); + priv->version = readw(&priv->reg->hcver); + debug("host version = %x\n", priv->version); /* mask all */ - writel(0xffffffff, &host->reg->norintstsen); - writel(0xffffffff, &host->reg->norintsigen); + writel(0xffffffff, &priv->reg->norintstsen); + writel(0xffffffff, &priv->reg->norintsigen); - writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */ + writeb(0xe, &priv->reg->timeoutcon); /* TMCLK * 2^27 */ /* * NORMAL Interrupt Status Enable Register init * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable @@ -508,35 +527,35 @@ static int tegra_mmc_core_init(struct mmc *mmc) * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable * [0] ENSTACMDCMPLT : Command Complete Status Enable */ - mask = readl(&host->reg->norintstsen); + mask = readl(&priv->reg->norintstsen); mask &= ~(0xffff); mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE | TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE | TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT | TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY | TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY); - writel(mask, &host->reg->norintstsen); + writel(mask, &priv->reg->norintstsen); /* * NORMAL Interrupt Signal Enable Register init * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable */ - mask = readl(&host->reg->norintsigen); + mask = readl(&priv->reg->norintsigen); mask &= ~(0xffff); mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE; - writel(mask, &host->reg->norintsigen); + writel(mask, &priv->reg->norintsigen); return 0; } static int tegra_mmc_getcd(struct mmc *mmc) { - struct mmc_host *host = mmc->priv; + struct tegra_mmc_priv *priv = mmc->priv; debug("tegra_mmc_getcd called\n"); - if (dm_gpio_is_valid(&host->cd_gpio)) - return dm_gpio_get_value(&host->cd_gpio); + if (dm_gpio_is_valid(&priv->cd_gpio)) + return dm_gpio_get_value(&priv->cd_gpio); return 1; } @@ -544,61 +563,29 @@ static int tegra_mmc_getcd(struct mmc *mmc) static const struct mmc_ops tegra_mmc_ops = { .send_cmd = tegra_mmc_send_cmd, .set_ios = tegra_mmc_set_ios, - .init = tegra_mmc_core_init, + .init = tegra_mmc_init, .getcd = tegra_mmc_getcd, }; -static int do_mmc_init(int dev_index, bool removable) +static int tegra_mmc_probe(struct udevice *dev) { - struct mmc_host *host; - struct mmc *mmc; -#ifdef CONFIG_TEGRA186 - int ret; -#endif + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); + struct tegra_mmc_priv *priv = dev_get_priv(dev); + int bus_width, ret; - /* DT should have been read & host config filled in */ - host = &mmc_host[dev_index]; - if (!host->enabled) - return -1; - - debug(" do_mmc_init: index %d, bus width %d pwr_gpio %d cd_gpio %d\n", - dev_index, host->width, gpio_get_number(&host->pwr_gpio), - gpio_get_number(&host->cd_gpio)); - - host->clock = 0; - -#ifdef CONFIG_TEGRA186 - ret = reset_assert(&host->reset_ctl); - if (ret) - return ret; - ret = clk_enable(&host->clk); - if (ret) - return ret; - ret = clk_set_rate(&host->clk, 20000000); - if (IS_ERR_VALUE(ret)) - return ret; - ret = reset_deassert(&host->reset_ctl); - if (ret) - return ret; -#else - clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); -#endif - - if (dm_gpio_is_valid(&host->pwr_gpio)) - dm_gpio_set_value(&host->pwr_gpio, 1); - - memset(&host->cfg, 0, sizeof(host->cfg)); + priv->cfg.name = "Tegra SD/MMC"; + priv->cfg.ops = &tegra_mmc_ops; - host->cfg.name = "Tegra SD/MMC"; - host->cfg.ops = &tegra_mmc_ops; + bus_width = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "bus-width", + 1); - host->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - host->cfg.host_caps = 0; - if (host->width == 8) - host->cfg.host_caps |= MMC_MODE_8BIT; - if (host->width >= 4) - host->cfg.host_caps |= MMC_MODE_4BIT; - host->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + priv->cfg.host_caps = 0; + if (bus_width == 8) + priv->cfg.host_caps |= MMC_MODE_8BIT; + if (bus_width >= 4) + priv->cfg.host_caps |= MMC_MODE_4BIT; + priv->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; /* * min freq is for card identification, and is the highest @@ -606,182 +593,71 @@ static int do_mmc_init(int dev_index, bool removable) * max freq is highest HS eMMC clock as per the SD/MMC spec * (actually 52MHz) */ - host->cfg.f_min = 375000; - host->cfg.f_max = 48000000; - - host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; - - mmc = mmc_create(&host->cfg, host); - mmc->block_dev.removable = removable; - if (mmc == NULL) - return -1; - - return 0; -} - -/** - * Get the host address and peripheral ID for a node. - * - * @param blob fdt blob - * @param node Device index (0-3) - * @param host Structure to fill in (reg, width, mmc_id) - */ -static int mmc_get_config(const void *blob, int node, struct mmc_host *host, - bool *removablep) -{ - debug("%s: node = %d\n", __func__, node); + priv->cfg.f_min = 375000; + priv->cfg.f_max = 48000000; - host->enabled = fdtdec_get_is_enabled(blob, node); + priv->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; - host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg"); - if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) { - debug("%s: no sdmmc base reg info found\n", __func__); - return -FDT_ERR_NOTFOUND; - } + priv->reg = (void *)dev_get_addr(dev); -#ifdef CONFIG_TEGRA186 - { - /* - * FIXME: This variable should go away when the MMC device - * actually is a udevice. - */ - struct udevice dev; - int ret; - dev.of_offset = node; - ret = reset_get_by_name(&dev, "sdhci", &host->reset_ctl); - if (ret) { - debug("reset_get_by_name() failed: %d\n", ret); - return ret; - } - ret = clk_get_by_index(&dev, 0, &host->clk); - if (ret) { - debug("clk_get_by_index() failed: %d\n", ret); - return ret; - } + ret = reset_get_by_name(dev, "sdhci", &priv->reset_ctl); + if (ret) { + debug("reset_get_by_name() failed: %d\n", ret); + return ret; } -#else - host->mmc_id = clock_decode_periph_id(blob, node); - if (host->mmc_id == PERIPH_ID_NONE) { - debug("%s: could not decode periph id\n", __func__); - return -FDT_ERR_NOTFOUND; + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret) { + debug("clk_get_by_index() failed: %d\n", ret); + return ret; } -#endif - /* - * NOTE: mmc->bus_width is determined by mmc.c dynamically. - * TBD: Override it with this value? - */ - host->width = fdtdec_get_int(blob, node, "bus-width", 0); - if (!host->width) - debug("%s: no sdmmc width found\n", __func__); + ret = reset_assert(&priv->reset_ctl); + if (ret) + return ret; + ret = clk_enable(&priv->clk); + if (ret) + return ret; + ret = clk_set_rate(&priv->clk, 20000000); + if (IS_ERR_VALUE(ret)) + return ret; + ret = reset_deassert(&priv->reset_ctl); + if (ret) + return ret; /* These GPIOs are optional */ - gpio_request_by_name_nodev(blob, node, "cd-gpios", 0, &host->cd_gpio, - GPIOD_IS_IN); - gpio_request_by_name_nodev(blob, node, "wp-gpios", 0, &host->wp_gpio, - GPIOD_IS_IN); - gpio_request_by_name_nodev(blob, node, "power-gpios", 0, - &host->pwr_gpio, GPIOD_IS_OUT); - *removablep = !fdtdec_get_bool(blob, node, "non-removable"); - - debug("%s: found controller at %p, width = %d, periph_id = %d\n", - __func__, host->reg, host->width, -#ifndef CONFIG_TEGRA186 - host->mmc_id -#else - -1 -#endif - ); - return 0; -} - -/* - * Process a list of nodes, adding them to our list of SDMMC ports. - * - * @param blob fdt blob - * @param node_list list of nodes to process (any <=0 are ignored) - * @param count number of nodes to process - * @return 0 if ok, -1 on error - */ -static int process_nodes(const void *blob, int node_list[], int count) -{ - struct mmc_host *host; - bool removable; - int i, node; - - debug("%s: count = %d\n", __func__, count); - - /* build mmc_host[] for each controller */ - for (i = 0; i < count; i++) { - node = node_list[i]; - if (node <= 0) - continue; + gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, + GPIOD_IS_IN); + gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, + GPIOD_IS_IN); + gpio_request_by_name(dev, "power-gpios", 0, + &priv->pwr_gpio, GPIOD_IS_OUT); + if (dm_gpio_is_valid(&priv->pwr_gpio)) + dm_gpio_set_value(&priv->pwr_gpio, 1); + + priv->mmc = mmc_create(&priv->cfg, priv); + if (priv->mmc == NULL) + return -1; - host = &mmc_host[i]; - host->id = i; + priv->mmc->dev = dev; + upriv->mmc = priv->mmc; - if (mmc_get_config(blob, node, host, &removable)) { - printf("%s: failed to decode dev %d\n", __func__, i); - return -1; - } - do_mmc_init(i, removable); - } return 0; } -void tegra_mmc_init(void) -{ - int node_list[CONFIG_SYS_MMC_MAX_DEVICE], count; - const void *blob = gd->fdt_blob; - debug("%s entry\n", __func__); - - /* See if any Tegra186 MMC controllers are present */ - count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA186_SDMMC, node_list, - CONFIG_SYS_MMC_MAX_DEVICE); - debug("%s: count of Tegra186 sdhci nodes is %d\n", __func__, count); - if (process_nodes(blob, node_list, count)) { - printf("%s: Error processing T186 mmc node(s)!\n", __func__); - return; - } - - /* See if any Tegra210 MMC controllers are present */ - count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA210_SDMMC, node_list, - CONFIG_SYS_MMC_MAX_DEVICE); - debug("%s: count of Tegra210 sdhci nodes is %d\n", __func__, count); - if (process_nodes(blob, node_list, count)) { - printf("%s: Error processing T210 mmc node(s)!\n", __func__); - return; - } - - /* See if any Tegra124 MMC controllers are present */ - count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA124_SDMMC, node_list, - CONFIG_SYS_MMC_MAX_DEVICE); - debug("%s: count of Tegra124 sdhci nodes is %d\n", __func__, count); - if (process_nodes(blob, node_list, count)) { - printf("%s: Error processing T124 mmc node(s)!\n", __func__); - return; - } - - /* See if any Tegra30 MMC controllers are present */ - count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, - CONFIG_SYS_MMC_MAX_DEVICE); - debug("%s: count of T30 sdhci nodes is %d\n", __func__, count); - if (process_nodes(blob, node_list, count)) { - printf("%s: Error processing T30 mmc node(s)!\n", __func__); - return; - } +static const struct udevice_id tegra_mmc_ids[] = { + { .compatible = "nvidia,tegra20-sdhci" }, + { .compatible = "nvidia,tegra30-sdhci" }, + { .compatible = "nvidia,tegra114-sdhci" }, + { .compatible = "nvidia,tegra124-sdhci" }, + { .compatible = "nvidia,tegra210-sdhci" }, + { .compatible = "nvidia,tegra186-sdhci" }, + { } +}; - /* Now look for any Tegra20 MMC controllers */ - count = fdtdec_find_aliases_for_id(blob, "sdhci", - COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, - CONFIG_SYS_MMC_MAX_DEVICE); - debug("%s: count of T20 sdhci nodes is %d\n", __func__, count); - if (process_nodes(blob, node_list, count)) { - printf("%s: Error processing T20 mmc node(s)!\n", __func__); - return; - } -} +U_BOOT_DRIVER(tegra_mmc_drv) = { + .name = "tegra_mmc", + .id = UCLASS_MMC, + .of_match = tegra_mmc_ids, + .probe = tegra_mmc_probe, + .priv_auto_alloc_size = sizeof(struct tegra_mmc_priv), +}; diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c index 6d51b9f0c0..51bb569a92 100644 --- a/drivers/net/mvneta.c +++ b/drivers/net/mvneta.c @@ -91,7 +91,11 @@ DECLARE_GLOBAL_DATA_PTR; #define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3)) #define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3)) #define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2)) +#define MVNETA_WIN_SIZE_MASK (0xffff0000) #define MVNETA_BASE_ADDR_ENABLE 0x2290 +#define MVNETA_BASE_ADDR_ENABLE_BIT 0x1 +#define MVNETA_PORT_ACCESS_PROTECT 0x2294 +#define MVNETA_PORT_ACCESS_PROTECT_WIN0_RW 0x3 #define MVNETA_PORT_CONFIG 0x2400 #define MVNETA_UNI_PROMISC_MODE BIT(0) #define MVNETA_DEF_RXQ(q) ((q) << 1) @@ -1022,7 +1026,7 @@ static int mvneta_txq_init(struct mvneta_port *pp, txq->size = pp->tx_ring_size; /* Allocate memory for TX descriptors */ - txq->descs_phys = (u32)txq->descs; + txq->descs_phys = (dma_addr_t)txq->descs; if (txq->descs == NULL) return -ENOMEM; @@ -1241,6 +1245,32 @@ static int mvneta_init2(struct mvneta_port *pp) } /* platform glue : initialize decoding windows */ + +/* + * Not like A380, in Armada3700, there are two layers of decode windows for GBE: + * First layer is: GbE Address window that resides inside the GBE unit, + * Second layer is: Fabric address window which is located in the NIC400 + * (South Fabric). + * To simplify the address decode configuration for Armada3700, we bypass the + * first layer of GBE decode window by setting the first window to 4GB. + */ +static void mvneta_bypass_mbus_windows(struct mvneta_port *pp) +{ + /* + * Set window size to 4GB, to bypass GBE address decode, leave the + * work to MBUS decode window + */ + mvreg_write(pp, MVNETA_WIN_SIZE(0), MVNETA_WIN_SIZE_MASK); + + /* Enable GBE address decode window 0 by set bit 0 to 0 */ + clrbits_le32(pp->base + MVNETA_BASE_ADDR_ENABLE, + MVNETA_BASE_ADDR_ENABLE_BIT); + + /* Set GBE address decode window 0 to full Access (read or write) */ + setbits_le32(pp->base + MVNETA_PORT_ACCESS_PROTECT, + MVNETA_PORT_ACCESS_PROTECT_WIN0_RW); +} + static void mvneta_conf_mbus_windows(struct mvneta_port *pp) { const struct mbus_dram_target_info *dram; @@ -1504,9 +1534,10 @@ static int mvneta_send(struct udevice *dev, void *packet, int length) /* Get a descriptor for the first part of the packet */ tx_desc = mvneta_txq_next_desc_get(txq); - tx_desc->buf_phys_addr = (u32)packet; + tx_desc->buf_phys_addr = (u32)(uintptr_t)packet; tx_desc->data_size = length; - flush_dcache_range((u32)packet, (u32)packet + length); + flush_dcache_range((ulong)packet, + (ulong)packet + ALIGN(length, PKTALIGN)); /* First and Last descriptor */ tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC; @@ -1562,7 +1593,7 @@ static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp) rx_bytes = rx_desc->data_size - 6; /* give packet to stack - skip on first 2 bytes */ - data = (u8 *)rx_desc->buf_cookie + 2; + data = (u8 *)(uintptr_t)rx_desc->buf_cookie + 2; /* * No cache invalidation needed here, since the rx_buffer's are * located in a uncached memory region @@ -1593,13 +1624,13 @@ static int mvneta_probe(struct udevice *dev) if (!buffer_loc.tx_descs) { /* Align buffer area for descs and rx_buffers to 1MiB */ bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); - mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, + mmu_set_region_dcache_behaviour((phys_addr_t)bd_space, BD_SPACE, DCACHE_OFF); buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space; buffer_loc.rx_descs = (struct mvneta_rx_desc *) - ((u32)bd_space + + ((phys_addr_t)bd_space + MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc)); - buffer_loc.rx_buffers = (u32) + buffer_loc.rx_buffers = (phys_addr_t) (bd_space + MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) + MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc)); @@ -1608,7 +1639,10 @@ static int mvneta_probe(struct udevice *dev) pp->base = (void __iomem *)pdata->iobase; /* Configure MBUS address windows */ - mvneta_conf_mbus_windows(pp); + if (of_device_is_compatible(dev, "marvell,armada-3700-neta")) + mvneta_bypass_mbus_windows(pp); + else + mvneta_conf_mbus_windows(pp); /* PHY interface is already decoded in mvneta_ofdata_to_platdata() */ pp->phy_interface = pdata->phy_interface; @@ -1671,6 +1705,7 @@ static int mvneta_ofdata_to_platdata(struct udevice *dev) static const struct udevice_id mvneta_ids[] = { { .compatible = "marvell,armada-370-neta" }, { .compatible = "marvell,armada-xp-neta" }, + { .compatible = "marvell,armada-3700-neta" }, { } }; diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig new file mode 100644 index 0000000000..4240028403 --- /dev/null +++ b/drivers/phy/marvell/Kconfig @@ -0,0 +1,9 @@ +config MVEBU_COMPHY_SUPPORT + bool "ComPhy SerDes driver" + default n + help + Choose this option to add support + for Comphy driver. + This driver passes over the lanes + and initialize the lane depends on the + type and speed. diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile new file mode 100644 index 0000000000..f181505389 --- /dev/null +++ b/drivers/phy/marvell/Makefile @@ -0,0 +1,8 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_MVEBU_COMPHY_SUPPORT) += comphy_core.o +obj-$(CONFIG_MVEBU_COMPHY_SUPPORT) += comphy_mux.o +obj-$(CONFIG_ARMADA_3700) += comphy_a3700.o +obj-$(CONFIG_ARMADA_8K) += comphy_cp110.o diff --git a/drivers/phy/marvell/comphy.h b/drivers/phy/marvell/comphy.h new file mode 100644 index 0000000000..df5b7d507e --- /dev/null +++ b/drivers/phy/marvell/comphy.h @@ -0,0 +1,153 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _COMPHY_H_ +#define _COMPHY_H_ + +#include <dt-bindings/comphy/comphy_data.h> +#include <fdtdec.h> + +#if defined(DEBUG) +#define debug_enter() printf("----> Enter %s\n", __func__); +#define debug_exit() printf("<---- Exit %s\n", __func__); +#else +#define debug_enter() +#define debug_exit() +#endif + +/* COMPHY registers */ +#define COMMON_PHY_CFG1_REG 0x0 +#define COMMON_PHY_CFG1_PWR_UP_OFFSET 1 +#define COMMON_PHY_CFG1_PWR_UP_MASK \ + (0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET) +#define COMMON_PHY_CFG1_PIPE_SELECT_OFFSET 2 +#define COMMON_PHY_CFG1_PIPE_SELECT_MASK \ + (0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET) +#define COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET 13 +#define COMMON_PHY_CFG1_PWR_ON_RESET_MASK \ + (0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET) +#define COMMON_PHY_CFG1_CORE_RSTN_OFFSET 14 +#define COMMON_PHY_CFG1_CORE_RSTN_MASK \ + (0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET) +#define COMMON_PHY_PHY_MODE_OFFSET 15 +#define COMMON_PHY_PHY_MODE_MASK \ + (0x1 << COMMON_PHY_PHY_MODE_OFFSET) + +#define COMMON_PHY_CFG6_REG 0x14 +#define COMMON_PHY_CFG6_IF_40_SEL_OFFSET 18 +#define COMMON_PHY_CFG6_IF_40_SEL_MASK \ + (0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET) + +#define COMMON_SELECTOR_PHY_OFFSET 0x140 +#define COMMON_SELECTOR_PIPE_OFFSET 0x144 + +#define COMMON_PHY_SD_CTRL1 0x148 +#define COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET 0 +#define COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK 0xFFFF +#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET 24 +#define COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK \ + (0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET) +#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET 25 +#define COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK \ + (0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET) +#define COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET 26 +#define COMMON_PHY_SD_CTRL1_RXAUI1_MASK \ + (0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET) +#define COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET 27 +#define COMMON_PHY_SD_CTRL1_RXAUI0_MASK \ + (0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET) + +/* ToDo: Get this address via DT */ +#define MVEBU_CP0_REGS_BASE 0xF2000000UL + +#define DFX_DEV_GEN_CTRL12 (MVEBU_CP0_REGS_BASE + 0x400280) +#define DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET 7 +#define DFX_DEV_GEN_PCIE_CLK_SRC_MASK \ + (0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET) + +#define MAX_LANE_OPTIONS 10 +#define MAX_UTMI_PHY_COUNT 2 + +struct comphy_mux_options { + u32 type; + u32 mux_value; +}; + +struct comphy_mux_data { + u32 max_lane_values; + struct comphy_mux_options mux_values[MAX_LANE_OPTIONS]; +}; + +struct comphy_map { + u32 type; + u32 speed; + u32 invert; + bool clk_src; +}; + +struct chip_serdes_phy_config { + struct comphy_mux_data *mux_data; + int (*ptr_comphy_chip_init)(struct chip_serdes_phy_config *, + struct comphy_map *); + void __iomem *comphy_base_addr; + void __iomem *hpipe3_base_addr; + u32 comphy_lanes_count; + u32 comphy_mux_bitcount; + u32 comphy_index; +}; + +/* Register helper functions */ +void reg_set(void __iomem *addr, u32 data, u32 mask); +void reg_set_silent(void __iomem *addr, u32 data, u32 mask); +void reg_set16(void __iomem *addr, u16 data, u16 mask); +void reg_set_silent16(void __iomem *addr, u16 data, u16 mask); + +/* SoC specific init functions */ +#ifdef CONFIG_ARMADA_3700 +int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *serdes_map); +#else +static inline int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *serdes_map) +{ + /* + * This function should never be called in this configuration, so + * lets return an error here. + */ + return -1; +} +#endif + +#ifdef CONFIG_ARMADA_8K +int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *serdes_map); +#else +static inline int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *serdes_map) +{ + /* + * This function should never be called in this configuration, so + * lets return an error here. + */ + return -1; +} +#endif + +void comphy_dedicated_phys_init(void); + +/* MUX function */ +void comphy_mux_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *comphy_map_data, + void __iomem *selector_base); + +void comphy_pcie_config_set(u32 comphy_max_count, + struct comphy_map *serdes_map); +void comphy_pcie_config_detect(u32 comphy_max_count, + struct comphy_map *serdes_map); +void comphy_pcie_unit_general_config(u32 pex_index); + +#endif /* _COMPHY_H_ */ + diff --git a/drivers/phy/marvell/comphy_a3700.c b/drivers/phy/marvell/comphy_a3700.c new file mode 100644 index 0000000000..faa62f90ae --- /dev/null +++ b/drivers/phy/marvell/comphy_a3700.c @@ -0,0 +1,962 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "comphy_a3700.h" + +DECLARE_GLOBAL_DATA_PTR; + +struct sgmii_phy_init_data_fix { + u16 addr; + u16 value; +}; + +/* Changes to 40M1G25 mode data required for running 40M3G125 init mode */ +static struct sgmii_phy_init_data_fix sgmii_phy_init_fix[] = { + {0x005, 0x07CC}, {0x015, 0x0000}, {0x01B, 0x0000}, {0x01D, 0x0000}, + {0x01E, 0x0000}, {0x01F, 0x0000}, {0x020, 0x0000}, {0x021, 0x0030}, + {0x026, 0x0888}, {0x04D, 0x0152}, {0x04F, 0xA020}, {0x050, 0x07CC}, + {0x053, 0xE9CA}, {0x055, 0xBD97}, {0x071, 0x3015}, {0x076, 0x03AA}, + {0x07C, 0x0FDF}, {0x0C2, 0x3030}, {0x0C3, 0x8000}, {0x0E2, 0x5550}, + {0x0E3, 0x12A4}, {0x0E4, 0x7D00}, {0x0E6, 0x0C83}, {0x101, 0xFCC0}, + {0x104, 0x0C10} +}; + +/* 40M1G25 mode init data */ +static u16 sgmii_phy_init[512] = { + /* 0 1 2 3 4 5 6 7 */ + /*-----------------------------------------------------------*/ + /* 8 9 A B C D E F */ + 0x3110, 0xFD83, 0x6430, 0x412F, 0x82C0, 0x06FA, 0x4500, 0x6D26, /* 00 */ + 0xAFC0, 0x8000, 0xC000, 0x0000, 0x2000, 0x49CC, 0x0BC9, 0x2A52, /* 08 */ + 0x0BD2, 0x0CDE, 0x13D2, 0x0CE8, 0x1149, 0x10E0, 0x0000, 0x0000, /* 10 */ + 0x0000, 0x0000, 0x0000, 0x0001, 0x0000, 0x4134, 0x0D2D, 0xFFFF, /* 18 */ + 0xFFE0, 0x4030, 0x1016, 0x0030, 0x0000, 0x0800, 0x0866, 0x0000, /* 20 */ + 0x0000, 0x0000, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, /* 28 */ + 0xFFFF, 0xFFFF, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* 30 */ + 0x0000, 0x0000, 0x000F, 0x6A62, 0x1988, 0x3100, 0x3100, 0x3100, /* 38 */ + 0x3100, 0xA708, 0x2430, 0x0830, 0x1030, 0x4610, 0xFF00, 0xFF00, /* 40 */ + 0x0060, 0x1000, 0x0400, 0x0040, 0x00F0, 0x0155, 0x1100, 0xA02A, /* 48 */ + 0x06FA, 0x0080, 0xB008, 0xE3ED, 0x5002, 0xB592, 0x7A80, 0x0001, /* 50 */ + 0x020A, 0x8820, 0x6014, 0x8054, 0xACAA, 0xFC88, 0x2A02, 0x45CF, /* 58 */ + 0x000F, 0x1817, 0x2860, 0x064F, 0x0000, 0x0204, 0x1800, 0x6000, /* 60 */ + 0x810F, 0x4F23, 0x4000, 0x4498, 0x0850, 0x0000, 0x000E, 0x1002, /* 68 */ + 0x9D3A, 0x3009, 0xD066, 0x0491, 0x0001, 0x6AB0, 0x0399, 0x3780, /* 70 */ + 0x0040, 0x5AC0, 0x4A80, 0x0000, 0x01DF, 0x0000, 0x0007, 0x0000, /* 78 */ + 0x2D54, 0x00A1, 0x4000, 0x0100, 0xA20A, 0x0000, 0x0000, 0x0000, /* 80 */ + 0x0000, 0x0000, 0x0000, 0x7400, 0x0E81, 0x1000, 0x1242, 0x0210, /* 88 */ + 0x80DF, 0x0F1F, 0x2F3F, 0x4F5F, 0x6F7F, 0x0F1F, 0x2F3F, 0x4F5F, /* 90 */ + 0x6F7F, 0x4BAD, 0x0000, 0x0000, 0x0800, 0x0000, 0x2400, 0xB651, /* 98 */ + 0xC9E0, 0x4247, 0x0A24, 0x0000, 0xAF19, 0x1004, 0x0000, 0x0000, /* A0 */ + 0x0000, 0x0013, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* A8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /* B0 */ + 0x0000, 0x0000, 0x0000, 0x0060, 0x0000, 0x0000, 0x0000, 0x0000, /* B8 */ + 0x0000, 0x0000, 0x3010, 0xFA00, 0x0000, 0x0000, 0x0000, 0x0003, /* C0 */ + 0x1618, 0x8200, 0x8000, 0x0400, 0x050F, 0x0000, 0x0000, 0x0000, /* C8 */ + 0x4C93, 0x0000, 0x1000, 0x1120, 0x0010, 0x1242, 0x1242, 0x1E00, /* D0 */ + 0x0000, 0x0000, 0x0000, 0x00F8, 0x0000, 0x0041, 0x0800, 0x0000, /* D8 */ + 0x82A0, 0x572E, 0x2490, 0x14A9, 0x4E00, 0x0000, 0x0803, 0x0541, /* E0 */ + 0x0C15, 0x0000, 0x0000, 0x0400, 0x2626, 0x0000, 0x0000, 0x4200, /* E8 */ + 0x0000, 0xAA55, 0x1020, 0x0000, 0x0000, 0x5010, 0x0000, 0x0000, /* F0 */ + 0x0000, 0x0000, 0x5000, 0x0000, 0x0000, 0x0000, 0x02F2, 0x0000, /* F8 */ + 0x101F, 0xFDC0, 0x4000, 0x8010, 0x0110, 0x0006, 0x0000, 0x0000, /*100 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*108 */ + 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04CF, 0x0000, 0x04C6, 0x0000, /*110 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*118 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*120 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*128 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*130 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*138 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*140 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*148 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*150 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*158 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*160 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*168 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*170 */ + 0x0000, 0x0000, 0x0000, 0x00F0, 0x08A2, 0x3112, 0x0A14, 0x0000, /*178 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*180 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*188 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*190 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*198 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1A8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1B8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1C8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1D8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1E8 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, /*1F0 */ + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 /*1F8 */ +}; + +/* + * comphy_poll_reg + * + * return: 1 on success, 0 on timeout + */ +static u32 comphy_poll_reg(void *addr, u32 val, u32 mask, u32 timeout, + u8 op_type) +{ + u32 rval = 0xDEAD; + + for (; timeout > 0; timeout--) { + if (op_type == POLL_16B_REG) + rval = readw(addr); /* 16 bit */ + else + rval = readl(addr) ; /* 32 bit */ + + if ((rval & mask) == val) + return 1; + + udelay(10000); + } + + debug("Time out waiting (%p = %#010x)\n", addr, rval); + return 0; +} + +/* + * comphy_pcie_power_up + * + * return: 1 if PLL locked (OK), 0 otherwise (FAIL) + */ +static int comphy_pcie_power_up(u32 speed, u32 invert) +{ + int ret; + + debug_enter(); + + /* + * 1. Enable max PLL. + */ + reg_set16((void __iomem *)LANE_CFG1_ADDR(PCIE), + bf_use_max_pll_rate, 0); + + /* + * 2. Select 20 bit SERDES interface. + */ + reg_set16((void __iomem *)GLOB_CLK_SRC_LO_ADDR(PCIE), + bf_cfg_sel_20b, 0); + + /* + * 3. Force to use reg setting for PCIe mode + */ + reg_set16((void __iomem *)MISC_REG1_ADDR(PCIE), + bf_sel_bits_pcie_force, 0); + + /* + * 4. Change RX wait + */ + reg_set16((void __iomem *)PWR_MGM_TIM1_ADDR(PCIE), 0x10C, 0xFFFF); + + /* + * 5. Enable idle sync + */ + reg_set16((void __iomem *)UNIT_CTRL_ADDR(PCIE), + 0x60 | rb_idle_sync_en, 0xFFFF); + + /* + * 6. Enable the output of 100M/125M/500M clock + */ + reg_set16((void __iomem *)MISC_REG0_ADDR(PCIE), + 0xA00D | rb_clk500m_en | rb_clk100m_125m_en, 0xFFFF); + + /* + * 7. Enable TX + */ + reg_set((void __iomem *)PHY_REF_CLK_ADDR, 0x1342, 0xFFFFFFFF); + + /* + * 8. Check crystal jumper setting and program the Power and PLL + * Control accordingly + */ + if (get_ref_clk() == 40) { + reg_set16((void __iomem *)PWR_PLL_CTRL_ADDR(PCIE), + 0xFC63, 0xFFFF); /* 40 MHz */ + } else { + reg_set16((void __iomem *)PWR_PLL_CTRL_ADDR(PCIE), + 0xFC62, 0xFFFF); /* 25 MHz */ + } + + /* + * 9. Override Speed_PLL value and use MAC PLL + */ + reg_set16((void __iomem *)KVCO_CAL_CTRL_ADDR(PCIE), + 0x0040 | rb_use_max_pll_rate, 0xFFFF); + + /* + * 10. Check the Polarity invert bit + */ + if (invert & PHY_POLARITY_TXD_INVERT) { + reg_set16((void __iomem *)SYNC_PATTERN_ADDR(PCIE), + phy_txd_inv, 0); + } + + if (invert & PHY_POLARITY_RXD_INVERT) { + reg_set16((void __iomem *)SYNC_PATTERN_ADDR(PCIE), + phy_rxd_inv, 0); + } + + /* + * 11. Release SW reset + */ + reg_set16((void __iomem *)GLOB_PHY_CTRL0_ADDR(PCIE), + rb_mode_core_clk_freq_sel | rb_mode_pipe_width_32, + bf_soft_rst | bf_mode_refdiv); + + /* Wait for > 55 us to allow PCLK be enabled */ + udelay(PLL_SET_DELAY_US); + + /* Assert PCLK enabled */ + ret = comphy_poll_reg((void *)LANE_STAT1_ADDR(PCIE), /* address */ + rb_txdclk_pclk_en, /* value */ + rb_txdclk_pclk_en, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_16B_REG); /* 16bit */ + if (ret == 0) + printf("Failed to lock PCIe PLL\n"); + + debug_exit(); + + /* Return the status of the PLL */ + return ret; +} + +/* + * comphy_sata_power_up + * + * return: 1 if PLL locked (OK), 0 otherwise (FAIL) + */ +static int comphy_sata_power_up(void) +{ + int ret; + + debug_enter(); + + /* + * 0. Swap SATA TX lines + */ + reg_set((void __iomem *)rh_vsreg_addr, + vphy_sync_pattern_reg, 0xFFFFFFFF); + reg_set((void __iomem *)rh_vsreg_data, bs_txd_inv, bs_txd_inv); + + /* + * 1. Select 40-bit data width width + */ + reg_set((void __iomem *)rh_vsreg_addr, vphy_loopback_reg0, 0xFFFFFFFF); + reg_set((void __iomem *)rh_vsreg_data, 0x800, bs_phyintf_40bit); + + /* + * 2. Select reference clock and PHY mode (SATA) + */ + reg_set((void __iomem *)rh_vsreg_addr, vphy_power_reg0, 0xFFFFFFFF); + if (get_ref_clk() == 40) { + reg_set((void __iomem *)rh_vsreg_data, + 0x3, 0x00FF); /* 40 MHz */ + } else { + reg_set((void __iomem *)rh_vsreg_data, + 0x1, 0x00FF); /* 25 MHz */ + } + + /* + * 3. Use maximum PLL rate (no power save) + */ + reg_set((void __iomem *)rh_vsreg_addr, vphy_calctl_reg, 0xFFFFFFFF); + reg_set((void __iomem *)rh_vsreg_data, + bs_max_pll_rate, bs_max_pll_rate); + + /* + * 4. Reset reserved bit (??) + */ + reg_set((void __iomem *)rh_vsreg_addr, vphy_reserve_reg, 0xFFFFFFFF); + reg_set((void __iomem *)rh_vsreg_data, 0, bs_phyctrl_frm_pin); + + /* + * 5. Set vendor-specific configuration (??) + */ + reg_set((void __iomem *)rh_vs0_a, vsata_ctrl_reg, 0xFFFFFFFF); + reg_set((void __iomem *)rh_vs0_d, bs_phy_pu_pll, bs_phy_pu_pll); + + /* Wait for > 55 us to allow PLL be enabled */ + udelay(PLL_SET_DELAY_US); + + /* Assert SATA PLL enabled */ + reg_set((void __iomem *)rh_vsreg_addr, vphy_loopback_reg0, 0xFFFFFFFF); + ret = comphy_poll_reg((void *)rh_vsreg_data, /* address */ + bs_pll_ready_tx, /* value */ + bs_pll_ready_tx, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + if (ret == 0) + printf("Failed to lock SATA PLL\n"); + + debug_exit(); + + return ret; +} + +/* + * comphy_usb3_power_up + * + * return: 1 if PLL locked (OK), 0 otherwise (FAIL) + */ +static int comphy_usb3_power_up(u32 type, u32 speed, u32 invert) +{ + int ret; + + debug_enter(); + + /* + * 1. Power up OTG module + */ + reg_set((void __iomem *)USB2_PHY_OTG_CTRL_ADDR, rb_pu_otg, 0); + + /* + * 2. Set counter for 100us pulse in USB3 Host and Device + * restore default burst size limit (Reference Clock 31:24) + */ + reg_set((void __iomem *)USB3_CTRPUL_VAL_REG, + 0x8 << 24, rb_usb3_ctr_100ns); + + + /* 0xd005c300 = 0x1001 */ + /* set PRD_TXDEEMPH (3.5db de-emph) */ + reg_set16((void __iomem *)LANE_CFG0_ADDR(USB3), 0x1, 0xFF); + + /* + * unset BIT0: set Tx Electrical Idle Mode: Transmitter is in + * low impedance mode during electrical idle + */ + /* unset BIT4: set G2 Tx Datapath with no Delayed Latency */ + /* unset BIT6: set Tx Detect Rx Mode at LoZ mode */ + reg_set16((void __iomem *)LANE_CFG1_ADDR(USB3), 0x0, 0xFFFF); + + + /* 0xd005c310 = 0x93: set Spread Spectrum Clock Enabled */ + reg_set16((void __iomem *)LANE_CFG4_ADDR(USB3), + bf_spread_spectrum_clock_en, 0x80); + + /* + * set Override Margining Controls From the MAC: Use margining signals + * from lane configuration + */ + reg_set16((void __iomem *)TEST_MODE_CTRL_ADDR(USB3), + rb_mode_margin_override, 0xFFFF); + + /* set Lane-to-Lane Bundle Clock Sampling Period = per PCLK cycles */ + /* set Mode Clock Source = PCLK is generated from REFCLK */ + reg_set16((void __iomem *)GLOB_CLK_SRC_LO_ADDR(USB3), 0x0, 0xFF); + + /* set G2 Spread Spectrum Clock Amplitude at 4K */ + reg_set16((void __iomem *)GEN2_SETTING_2_ADDR(USB3), g2_tx_ssc_amp, + 0xF000); + + /* + * unset G3 Spread Spectrum Clock Amplitude & set G3 TX and RX Register + * Master Current Select + */ + reg_set16((void __iomem *)GEN2_SETTING_3_ADDR(USB3), 0x0, 0xFFFF); + + /* + * 3. Check crystal jumper setting and program the Power and PLL + * Control accordingly + */ + if (get_ref_clk() == 40) { + reg_set16((void __iomem *)PWR_PLL_CTRL_ADDR(USB3), 0xFCA3, + 0xFFFF); /* 40 MHz */ + } else { + reg_set16((void __iomem *)PWR_PLL_CTRL_ADDR(USB3), 0xFCA2, + 0xFFFF); /* 25 MHz */ + } + + /* + * 4. Change RX wait + */ + reg_set16((void __iomem *)PWR_MGM_TIM1_ADDR(USB3), 0x10C, 0xFFFF); + + /* + * 5. Enable idle sync + */ + reg_set16((void __iomem *)UNIT_CTRL_ADDR(USB3), 0x60 | rb_idle_sync_en, + 0xFFFF); + + /* + * 6. Enable the output of 500M clock + */ + reg_set16((void __iomem *)MISC_REG0_ADDR(USB3), 0xA00D | rb_clk500m_en, + 0xFFFF); + + /* + * 7. Set 20-bit data width + */ + reg_set16((void __iomem *)DIG_LB_EN_ADDR(USB3), 0x0400, 0xFFFF); + + /* + * 8. Override Speed_PLL value and use MAC PLL + */ + reg_set16((void __iomem *)KVCO_CAL_CTRL_ADDR(USB3), + 0x0040 | rb_use_max_pll_rate, 0xFFFF); + + /* + * 9. Check the Polarity invert bit + */ + if (invert & PHY_POLARITY_TXD_INVERT) { + reg_set16((void __iomem *)SYNC_PATTERN_ADDR(USB3), + phy_txd_inv, 0); + } + + if (invert & PHY_POLARITY_RXD_INVERT) { + reg_set16((void __iomem *)SYNC_PATTERN_ADDR(USB3), + phy_rxd_inv, 0); + } + + /* + * 10. Release SW reset + */ + reg_set16((void __iomem *)GLOB_PHY_CTRL0_ADDR(USB3), + rb_mode_core_clk_freq_sel | rb_mode_pipe_width_32 | 0x20, + 0xFFFF); + + /* Wait for > 55 us to allow PCLK be enabled */ + udelay(PLL_SET_DELAY_US); + + /* Assert PCLK enabled */ + ret = comphy_poll_reg((void *)LANE_STAT1_ADDR(USB3), /* address */ + rb_txdclk_pclk_en, /* value */ + rb_txdclk_pclk_en, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_16B_REG); /* 16bit */ + if (ret == 0) + printf("Failed to lock USB3 PLL\n"); + + /* + * Set Soft ID for Host mode (Device mode works with Hard ID + * detection) + */ + if (type == PHY_TYPE_USB3_HOST0) { + /* + * set BIT0: set ID_MODE of Host/Device = "Soft ID" (BIT1) + * clear BIT1: set SOFT_ID = Host + * set BIT4: set INT_MODE = ID. Interrupt Mode: enable + * interrupt by ID instead of using both interrupts + * of HOST and Device ORed simultaneously + * INT_MODE=ID in order to avoid unexpected + * behaviour or both interrupts together + */ + reg_set((void __iomem *)USB32_CTRL_BASE, + usb32_ctrl_id_mode | usb32_ctrl_int_mode, + usb32_ctrl_id_mode | usb32_ctrl_soft_id | + usb32_ctrl_int_mode); + } + + debug_exit(); + + return ret; +} + +/* + * comphy_usb2_power_up + * + * return: 1 if PLL locked (OK), 0 otherwise (FAIL) + */ +static int comphy_usb2_power_up(u8 usb32) +{ + int ret; + + debug_enter(); + + if (usb32 != 0 && usb32 != 1) { + printf("invalid usb32 value: (%d), should be either 0 or 1\n", + usb32); + debug_exit(); + return 0; + } + + /* + * 0. Setup PLL. 40MHz clock uses defaults. + * See "PLL Settings for Typical REFCLK" table + */ + if (get_ref_clk() == 25) { + reg_set((void __iomem *)USB2_PHY_BASE(usb32), + 5 | (96 << 16), 0x3F | (0xFF << 16) | (0x3 << 28)); + } + + /* + * 1. PHY pull up and disable USB2 suspend + */ + reg_set((void __iomem *)USB2_PHY_CTRL_ADDR(usb32), + RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU(usb32), 0); + + if (usb32 != 0) { + /* + * 2. Power up OTG module + */ + reg_set((void __iomem *)USB2_PHY_OTG_CTRL_ADDR, rb_pu_otg, 0); + + /* + * 3. Configure PHY charger detection + */ + reg_set((void __iomem *)USB2_PHY_CHRGR_DET_ADDR, 0, + rb_cdp_en | rb_dcp_en | rb_pd_en | rb_cdp_dm_auto | + rb_enswitch_dp | rb_enswitch_dm | rb_pu_chrg_dtc); + } + + /* Assert PLL calibration done */ + ret = comphy_poll_reg((void *)USB2_PHY_CAL_CTRL_ADDR(usb32), + rb_usb2phy_pllcal_done, /* value */ + rb_usb2phy_pllcal_done, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + if (ret == 0) + printf("Failed to end USB2 PLL calibration\n"); + + /* Assert impedance calibration done */ + ret = comphy_poll_reg((void *)USB2_PHY_CAL_CTRL_ADDR(usb32), + rb_usb2phy_impcal_done, /* value */ + rb_usb2phy_impcal_done, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + if (ret == 0) + printf("Failed to end USB2 impedance calibration\n"); + + /* Assert squetch calibration done */ + ret = comphy_poll_reg((void *)USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32), + rb_usb2phy_sqcal_done, /* value */ + rb_usb2phy_sqcal_done, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + if (ret == 0) + printf("Failed to end USB2 unknown calibration\n"); + + /* Assert PLL is ready */ + ret = comphy_poll_reg((void *)USB2_PHY_PLL_CTRL0_ADDR(usb32), + rb_usb2phy_pll_ready, /* value */ + rb_usb2phy_pll_ready, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + + if (ret == 0) + printf("Failed to lock USB2 PLL\n"); + + debug_exit(); + + return ret; +} + +/* + * comphy_emmc_power_up + * + * return: 1 if PLL locked (OK), 0 otherwise (FAIL) + */ +static int comphy_emmc_power_up(void) +{ + debug_enter(); + + /* + * 1. Bus power ON, Bus voltage 1.8V + */ + reg_set((void __iomem *)SDIO_HOST_CTRL1_ADDR, 0xB00, 0xF00); + + /* + * 2. Set FIFO parameters + */ + reg_set((void __iomem *)SDIO_SDHC_FIFO_ADDR, 0x315, 0xFFFFFFFF); + + /* + * 3. Set Capabilities 1_2 + */ + reg_set((void __iomem *)SDIO_CAP_12_ADDR, 0x25FAC8B2, 0xFFFFFFFF); + + /* + * 4. Set Endian + */ + reg_set((void __iomem *)SDIO_ENDIAN_ADDR, 0x00c00000, 0); + + /* + * 4. Init PHY + */ + reg_set((void __iomem *)SDIO_PHY_TIMING_ADDR, 0x80000000, 0x80000000); + reg_set((void __iomem *)SDIO_PHY_PAD_CTRL0_ADDR, 0x50000000, + 0xF0000000); + + /* + * 5. DLL reset + */ + reg_set((void __iomem *)SDIO_DLL_RST_ADDR, 0xFFFEFFFF, 0); + reg_set((void __iomem *)SDIO_DLL_RST_ADDR, 0x00010000, 0); + + debug_exit(); + + return 1; +} + +/* + * comphy_sgmii_power_up + * + * return: + */ +static void comphy_sgmii_phy_init(u32 lane, u32 speed) +{ + const int fix_arr_sz = ARRAY_SIZE(sgmii_phy_init_fix); + int addr, fix_idx; + u16 val; + + fix_idx = 0; + for (addr = 0; addr < 512; addr++) { + /* + * All PHY register values are defined in full for 3.125Gbps + * SERDES speed. The values required for 1.25 Gbps are almost + * the same and only few registers should be "fixed" in + * comparison to 3.125 Gbps values. These register values are + * stored in "sgmii_phy_init_fix" array. + */ + if ((speed != PHY_SPEED_1_25G) && + (sgmii_phy_init_fix[fix_idx].addr == addr)) { + /* Use new value */ + val = sgmii_phy_init_fix[fix_idx].value; + if (fix_idx < fix_arr_sz) + fix_idx++; + } else { + val = sgmii_phy_init[addr]; + } + + phy_write16(lane, addr, val, 0xFFFF); + } +} + +/* + * comphy_sgmii_power_up + * + * return: 1 if PLL locked (OK), 0 otherwise (FAIL) + */ +static int comphy_sgmii_power_up(u32 lane, u32 speed, u32 invert) +{ + int ret; + + debug_enter(); + + /* + * 1. Configure PHY to SATA/SAS mode by setting pin PIN_PIPE_SEL=0 + */ + reg_set((void __iomem *)COMPHY_SEL_ADDR, 0, rf_compy_select(lane)); + + /* + * 2. Reset PHY by setting PHY input port PIN_RESET=1. + * 3. Set PHY input port PIN_TX_IDLE=1, PIN_PU_IVREF=1 to keep + * PHY TXP/TXN output to idle state during PHY initialization + * 4. Set PHY input port PIN_PU_PLL=0, PIN_PU_RX=0, PIN_PU_TX=0. + */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), + rb_pin_reset_comphy | rb_pin_tx_idle | rb_pin_pu_iveref, + rb_pin_reset_core | rb_pin_pu_pll | + rb_pin_pu_rx | rb_pin_pu_tx); + + /* + * 5. Release reset to the PHY by setting PIN_RESET=0. + */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), + 0, rb_pin_reset_comphy); + + /* + * 7. Set PIN_PHY_GEN_TX[3:0] and PIN_PHY_GEN_RX[3:0] to decide + * COMPHY bit rate + */ + if (speed == PHY_SPEED_3_125G) { /* 3.125 GHz */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), + (0x8 << rf_gen_rx_sel_shift) | + (0x8 << rf_gen_tx_sel_shift), + rf_gen_rx_select | rf_gen_tx_select); + + } else if (speed == PHY_SPEED_1_25G) { /* 1.25 GHz */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), + (0x6 << rf_gen_rx_sel_shift) | + (0x6 << rf_gen_tx_sel_shift), + rf_gen_rx_select | rf_gen_tx_select); + } else { + printf("Unsupported COMPHY speed!\n"); + return 0; + } + + /* + * 8. Wait 1mS for bandgap and reference clocks to stabilize; + * then start SW programming. + */ + mdelay(10); + + /* 9. Program COMPHY register PHY_MODE */ + phy_write16(lane, PHY_PWR_PLL_CTRL_ADDR, + PHY_MODE_SGMII << rf_phy_mode_shift, rf_phy_mode_mask); + + /* + * 10. Set COMPHY register REFCLK_SEL to select the correct REFCLK + * source + */ + phy_write16(lane, PHY_MISC_REG0_ADDR, 0, rb_ref_clk_sel); + + /* + * 11. Set correct reference clock frequency in COMPHY register + * REF_FREF_SEL. + */ + if (get_ref_clk() == 40) { + phy_write16(lane, PHY_PWR_PLL_CTRL_ADDR, + 0x4 << rf_ref_freq_sel_shift, rf_ref_freq_sel_mask); + } else { + /* 25MHz */ + phy_write16(lane, PHY_PWR_PLL_CTRL_ADDR, + 0x1 << rf_ref_freq_sel_shift, rf_ref_freq_sel_mask); + } + + /* 12. Program COMPHY register PHY_GEN_MAX[1:0] */ + /* + * This step is mentioned in the flow received from verification team. + * However the PHY_GEN_MAX value is only meaningful for other + * interfaces (not SGMII). For instance, it selects SATA speed + * 1.5/3/6 Gbps or PCIe speed 2.5/5 Gbps + */ + + /* + * 13. Program COMPHY register SEL_BITS to set correct parallel data + * bus width + */ + /* 10bit */ + phy_write16(lane, PHY_DIG_LB_EN_ADDR, 0, rf_data_width_mask); + + /* + * 14. As long as DFE function needs to be enabled in any mode, + * COMPHY register DFE_UPDATE_EN[5:0] shall be programmed to 0x3F + * for real chip during COMPHY power on. + */ + /* + * The step 14 exists (and empty) in the original initialization flow + * obtained from the verification team. According to the functional + * specification DFE_UPDATE_EN already has the default value 0x3F + */ + + /* + * 15. Program COMPHY GEN registers. + * These registers should be programmed based on the lab testing + * result to achieve optimal performance. Please contact the CEA + * group to get the related GEN table during real chip bring-up. + * We only requred to run though the entire registers programming + * flow defined by "comphy_sgmii_phy_init" when the REF clock is + * 40 MHz. For REF clock 25 MHz the default values stored in PHY + * registers are OK. + */ + debug("Running C-DPI phy init %s mode\n", + speed == PHY_SPEED_3_125G ? "2G5" : "1G"); + if (get_ref_clk() == 40) + comphy_sgmii_phy_init(lane, speed); + + /* + * 16. [Simulation Only] should not be used for real chip. + * By pass power up calibration by programming EXT_FORCE_CAL_DONE + * (R02h[9]) to 1 to shorten COMPHY simulation time. + */ + /* + * 17. [Simulation Only: should not be used for real chip] + * Program COMPHY register FAST_DFE_TIMER_EN=1 to shorten RX + * training simulation time. + */ + + /* + * 18. Check the PHY Polarity invert bit + */ + if (invert & PHY_POLARITY_TXD_INVERT) + phy_write16(lane, PHY_SYNC_PATTERN_ADDR, phy_txd_inv, 0); + + if (invert & PHY_POLARITY_RXD_INVERT) + phy_write16(lane, PHY_SYNC_PATTERN_ADDR, phy_rxd_inv, 0); + + /* + * 19. Set PHY input ports PIN_PU_PLL, PIN_PU_TX and PIN_PU_RX to 1 + * to start PHY power up sequence. All the PHY register + * programming should be done before PIN_PU_PLL=1. There should be + * no register programming for normal PHY operation from this point. + */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), + rb_pin_pu_pll | rb_pin_pu_rx | rb_pin_pu_tx, + rb_pin_pu_pll | rb_pin_pu_rx | rb_pin_pu_tx); + + /* + * 20. Wait for PHY power up sequence to finish by checking output ports + * PIN_PLL_READY_TX=1 and PIN_PLL_READY_RX=1. + */ + ret = comphy_poll_reg((void *)COMPHY_PHY_STAT1_ADDR(lane), /* address */ + rb_pll_ready_tx | rb_pll_ready_rx, /* value */ + rb_pll_ready_tx | rb_pll_ready_rx, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + if (ret == 0) + printf("Failed to lock PLL for SGMII PHY %d\n", lane); + + /* + * 21. Set COMPHY input port PIN_TX_IDLE=0 + */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), + 0x0, rb_pin_tx_idle); + + /* + * 22. After valid data appear on PIN_RXDATA bus, set PIN_RX_INIT=1. + * to start RX initialization. PIN_RX_INIT_DONE will be cleared to + * 0 by the PHY. After RX initialization is done, PIN_RX_INIT_DONE + * will be set to 1 by COMPHY. Set PIN_RX_INIT=0 after + * PIN_RX_INIT_DONE= 1. + * Please refer to RX initialization part for details. + */ + reg_set((void __iomem *)COMPHY_PHY_CFG1_ADDR(lane), rb_phy_rx_init, + 0x0); + + ret = comphy_poll_reg((void *)COMPHY_PHY_STAT1_ADDR(lane), /* address */ + rb_rx_init_done, /* value */ + rb_rx_init_done, /* mask */ + PLL_LOCK_TIMEOUT, /* timeout */ + POLL_32B_REG); /* 32bit */ + if (ret == 0) + printf("Failed to init RX of SGMII PHY %d\n", lane); + + debug_exit(); + + return ret; +} + +void comphy_dedicated_phys_init(void) +{ + int node, usb32, ret = 1; + const void *blob = gd->fdt_blob; + + debug_enter(); + + for (usb32 = 0; usb32 <= 1; usb32++) { + /* + * There are 2 UTMI PHYs in this SOC. + * One is independendent and one is paired with USB3 port (OTG) + */ + if (usb32 == 0) { + node = fdt_node_offset_by_compatible( + blob, -1, "marvell,armada-3700-ehci"); + } else { + node = fdt_node_offset_by_compatible( + blob, -1, "marvell,armada3700-xhci"); + } + + if (node > 0) { + if (fdtdec_get_is_enabled(blob, node)) { + ret = comphy_usb2_power_up(usb32); + if (ret == 0) + printf("Failed to initialize UTMI PHY\n"); + else + debug("UTMI PHY init succeed\n"); + } else { + debug("USB%d node is disabled\n", + usb32 == 0 ? 2 : 3); + } + } else { + debug("No USB%d node in DT\n", usb32 == 0 ? 2 : 3); + } + } + + node = fdt_node_offset_by_compatible(blob, -1, + "marvell,armada-3700-ahci"); + if (node > 0) { + if (fdtdec_get_is_enabled(blob, node)) { + ret = comphy_sata_power_up(); + if (ret == 0) + printf("Failed to initialize SATA PHY\n"); + else + debug("SATA PHY init succeed\n"); + } else { + debug("SATA node is disabled\n"); + } + } else { + debug("No SATA node in DT\n"); + } + + node = fdt_node_offset_by_compatible(blob, -1, + "marvell,armada-3700-sdio"); + if (node <= 0) { + debug("No SDIO node in DT, looking for MMC one\n"); + node = fdt_node_offset_by_compatible(blob, -1, + "marvell,xenon-sdhci"); + } + + if (node > 0) { + if (fdtdec_get_is_enabled(blob, node)) { + ret = comphy_emmc_power_up(); + if (ret == 0) + printf("Failed to initialize SDIO/eMMC PHY\n"); + else + debug("SDIO/eMMC PHY init succeed\n"); + } else { + debug("SDIO/eMMC node is disabled\n"); + } + } else { + debug("No SDIO/eMMC node in DT\n"); + } + + debug_exit(); +} + +int comphy_a3700_init(struct chip_serdes_phy_config *chip_cfg, + struct comphy_map *serdes_map) +{ + struct comphy_map *comphy_map; + u32 comphy_max_count = chip_cfg->comphy_lanes_count; + u32 lane, ret = 0; + + debug_enter(); + + for (lane = 0, comphy_map = serdes_map; lane < comphy_max_count; + lane++, comphy_map++) { + debug("Initialize serdes number %d\n", lane); + debug("Serdes type = 0x%x invert=%d\n", + comphy_map->type, comphy_map->invert); + + switch (comphy_map->type) { + case PHY_TYPE_UNCONNECTED: + continue; + break; + + case PHY_TYPE_PEX0: + ret = comphy_pcie_power_up(comphy_map->speed, + comphy_map->invert); + break; + + case PHY_TYPE_USB3_HOST0: + case PHY_TYPE_USB3_DEVICE: + ret = comphy_usb3_power_up(comphy_map->type, + comphy_map->speed, + comphy_map->invert); + break; + + case PHY_TYPE_SGMII0: + case PHY_TYPE_SGMII1: + ret = comphy_sgmii_power_up(lane, comphy_map->speed, + comphy_map->invert); + break; + + default: + debug("Unknown SerDes type, skip initialize SerDes %d\n", + lane); + ret = 1; + break; + } + if (ret == 0) + printf("PLL is not locked - Failed to initialize lane %d\n", + lane); + } + + debug_exit(); + return ret; +} diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h new file mode 100644 index 0000000000..eb2ed7b317 --- /dev/null +++ b/drivers/phy/marvell/comphy_a3700.h @@ -0,0 +1,275 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _COMPHY_A3700_H_ +#define _COMPHY_A3700_H_ + +#include "comphy.h" +#include "comphy_hpipe.h" + +#define MVEBU_REG(offs) ((uintptr_t)MVEBU_REGISTER(offs)) + +#define DEFAULT_REFCLK_MHZ 25 +#define PLL_SET_DELAY_US 600 +#define PLL_LOCK_TIMEOUT 1000 +#define POLL_16B_REG 1 +#define POLL_32B_REG 0 + +/* + * COMPHY SB definitions + */ +#define COMPHY_SEL_ADDR MVEBU_REG(0x0183FC) +#define rf_compy_select(lane) (0x1 << (((lane) == 1) ? 4 : 0)) + +#define COMPHY_PHY_CFG1_ADDR(lane) MVEBU_REG(0x018300 + (lane) * 0x28) +#define rb_pin_pu_iveref BIT(1) +#define rb_pin_reset_core BIT(11) +#define rb_pin_reset_comphy BIT(12) +#define rb_pin_pu_pll BIT(16) +#define rb_pin_pu_rx BIT(17) +#define rb_pin_pu_tx BIT(18) +#define rb_pin_tx_idle BIT(19) +#define rf_gen_rx_sel_shift 22 +#define rf_gen_rx_select (0xFF << rf_gen_rx_sel_shift) +#define rf_gen_tx_sel_shift 26 +#define rf_gen_tx_select (0xFF << rf_gen_tx_sel_shift) +#define rb_phy_rx_init BIT(30) + +#define COMPHY_PHY_STAT1_ADDR(lane) MVEBU_REG(0x018318 + (lane) * 0x28) +#define rb_rx_init_done BIT(0) +#define rb_pll_ready_rx BIT(2) +#define rb_pll_ready_tx BIT(3) + +/* + * PCIe/USB/SGMII definitions + */ +#define PCIE_BASE MVEBU_REG(0x070000) +#define PCIETOP_BASE MVEBU_REG(0x080000) +#define PCIE_RAMBASE MVEBU_REG(0x08C000) +#define PCIEPHY_BASE MVEBU_REG(0x01F000) +#define PCIEPHY_SHFT 2 + +#define USB32_BASE MVEBU_REG(0x050000) /* usb3 device */ +#define USB32H_BASE MVEBU_REG(0x058000) /* usb3 host */ +#define USB3PHY_BASE MVEBU_REG(0x05C000) +#define USB2PHY_BASE MVEBU_REG(0x05D000) +#define USB2PHY2_BASE MVEBU_REG(0x05F000) +#define USB32_CTRL_BASE MVEBU_REG(0x05D800) +#define USB3PHY_SHFT 2 + +#define SGMIIPHY_BASE(l) (l == 1 ? USB3PHY_BASE : PCIEPHY_BASE) +#define SGMIIPHY_ADDR(l, a) (((a & 0x00007FF) * 2) | SGMIIPHY_BASE(l)) + +#define phy_read16(l, a) read16((void __iomem *)SGMIIPHY_ADDR(l, a)) +#define phy_write16(l, a, data, mask) \ + reg_set16((void __iomem *)SGMIIPHY_ADDR(l, a), data, mask) + +/* units */ +#define PCIE 1 +#define USB3 2 + +#define PHY_BASE(unit) ((unit == PCIE) ? PCIEPHY_BASE : USB3PHY_BASE) +#define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT) + +/* bit definition for USB32_CTRL_BASE (USB32 Control Mode) */ +#define usb32_ctrl_id_mode BIT(0) +#define usb32_ctrl_soft_id BIT(1) +#define usb32_ctrl_int_mode BIT(4) + + +#define PHY_PWR_PLL_CTRL_ADDR 0x01 /* for phy_read16 and phy_write16 */ +#define PWR_PLL_CTRL_ADDR(unit) \ + (PHY_PWR_PLL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rf_phy_mode_shift 5 +#define rf_phy_mode_mask (0x7 << rf_phy_mode_shift) +#define rf_ref_freq_sel_shift 0 +#define rf_ref_freq_sel_mask (0x1F << rf_ref_freq_sel_shift) +#define PHY_MODE_SGMII 0x4 + +/* for phy_read16 and phy_write16 */ +#define PHY_REG_KVCO_CAL_CTRL_ADDR 0x02 +#define KVCO_CAL_CTRL_ADDR(unit) \ + (PHY_REG_KVCO_CAL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rb_use_max_pll_rate BIT(12) +#define rb_force_calibration_done BIT(9) + +/* for phy_read16 and phy_write16 */ +#define PHY_DIG_LB_EN_ADDR 0x23 +#define DIG_LB_EN_ADDR(unit) \ + (PHY_DIG_LB_EN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rf_data_width_shift 10 +#define rf_data_width_mask (0x3 << rf_data_width_shift) + +/* for phy_read16 and phy_write16 */ +#define PHY_SYNC_PATTERN_ADDR 0x24 +#define SYNC_PATTERN_ADDR(unit) \ + (PHY_SYNC_PATTERN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define phy_txd_inv BIT(10) +#define phy_rxd_inv BIT(11) + +/* for phy_read16 and phy_write16 */ +#define PHY_REG_UNIT_CTRL_ADDR 0x48 +#define UNIT_CTRL_ADDR(unit) \ + (PHY_REG_UNIT_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rb_idle_sync_en BIT(12) + +/* for phy_read16 and phy_write16 */ +#define PHY_REG_GEN2_SETTINGS_2 0x3e +#define GEN2_SETTING_2_ADDR(unit) \ + (PHY_REG_GEN2_SETTINGS_2 * PHY_SHFT(unit) + PHY_BASE(unit)) +#define g2_tx_ssc_amp BIT(14) + +/* for phy_read16 and phy_write16 */ +#define PHY_REG_GEN2_SETTINGS_3 0x3f +#define GEN2_SETTING_3_ADDR(unit) \ + (PHY_REG_GEN2_SETTINGS_3 * PHY_SHFT(unit) + PHY_BASE(unit)) + +/* for phy_read16 and phy_write16 */ +#define PHY_MISC_REG0_ADDR 0x4f +#define MISC_REG0_ADDR(unit) \ + (PHY_MISC_REG0_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rb_clk100m_125m_en BIT(4) +#define rb_clk500m_en BIT(7) +#define rb_ref_clk_sel BIT(10) + +/* for phy_read16 and phy_write16 */ +#define PHY_REG_IFACE_REF_CLK_CTRL_ADDR 0x51 +#define UNIT_IFACE_REF_CLK_CTRL_ADDR(unit) \ + (PHY_REG_IFACE_REF_CLK_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rb_ref1m_gen_div_force BIT(8) +#define rf_ref1m_gen_div_value_shift 0 +#define rf_ref1m_gen_div_value_mask (0xFF << rf_ref1m_gen_div_value_shift) + +/* for phy_read16 and phy_write16 */ +#define PHY_REG_ERR_CNT_CONST_CTRL_ADDR 0x6A +#define UNIT_ERR_CNT_CONST_CTRL_ADDR(unit) \ + (PHY_REG_ERR_CNT_CONST_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit)) +#define rb_fast_dfe_enable BIT(13) + +#define MISC_REG1_ADDR(u) (0x73 * PHY_SHFT(u) + PHY_BASE(u)) +#define bf_sel_bits_pcie_force BIT(15) + +#define LANE_CFG0_ADDR(u) (0x180 * PHY_SHFT(u) + PHY_BASE(u)) +#define bf_use_max_pll_rate BIT(9) +#define LANE_CFG1_ADDR(u) (0x181 * PHY_SHFT(u) + PHY_BASE(u)) +#define bf_use_max_pll_rate BIT(9) +/* 0x5c310 = 0x93 (set BIT7) */ +#define LANE_CFG4_ADDR(u) (0x188 * PHY_SHFT(u) + PHY_BASE(u)) +#define bf_spread_spectrum_clock_en BIT(7) + +#define LANE_STAT1_ADDR(u) (0x183 * PHY_SHFT(u) + PHY_BASE(u)) +#define rb_txdclk_pclk_en BIT(0) + +#define GLOB_PHY_CTRL0_ADDR(u) (0x1c1 * PHY_SHFT(u) + PHY_BASE(u)) +#define bf_soft_rst BIT(0) +#define bf_mode_refdiv 0x30 +#define rb_mode_core_clk_freq_sel BIT(9) +#define rb_mode_pipe_width_32 BIT(3) + +#define TEST_MODE_CTRL_ADDR(u) (0x1c2 * PHY_SHFT(u) + PHY_BASE(u)) +#define rb_mode_margin_override BIT(2) + +#define GLOB_CLK_SRC_LO_ADDR(u) (0x1c3 * PHY_SHFT(u) + PHY_BASE(u)) +#define bf_cfg_sel_20b BIT(15) + +#define PWR_MGM_TIM1_ADDR(u) (0x1d0 * PHY_SHFT(u) + PHY_BASE(u)) + +#define PHY_REF_CLK_ADDR (0x4814 + PCIE_BASE) + +#define USB3_CTRPUL_VAL_REG (0x20 + USB32_BASE) +#define USB3H_CTRPUL_VAL_REG (0x3454 + USB32H_BASE) +#define rb_usb3_ctr_100ns 0xff000000 + +#define USB2_OTG_PHY_CTRL_ADDR (0x820 + USB2PHY_BASE) +#define rb_usb2phy_suspm BIT(14) +#define rb_usb2phy_pu BIT(0) + +#define USB2_PHY_OTG_CTRL_ADDR (0x34 + USB2PHY_BASE) +#define rb_pu_otg BIT(4) + +#define USB2_PHY_CHRGR_DET_ADDR (0x38 + USB2PHY_BASE) +#define rb_cdp_en BIT(2) +#define rb_dcp_en BIT(3) +#define rb_pd_en BIT(4) +#define rb_pu_chrg_dtc BIT(5) +#define rb_cdp_dm_auto BIT(7) +#define rb_enswitch_dp BIT(12) +#define rb_enswitch_dm BIT(13) + +#define USB2_CAL_CTRL_ADDR (0x8 + USB2PHY_BASE) +#define rb_usb2phy_pllcal_done BIT(31) +#define rb_usb2phy_impcal_done BIT(23) + +#define USB2_PLL_CTRL0_ADDR (0x0 + USB2PHY_BASE) +#define rb_usb2phy_pll_ready BIT(31) + +#define USB2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY_BASE) +#define rb_usb2phy_sqcal_done BIT(31) + +#define USB2_PHY2_CTRL_ADDR (0x804 + USB2PHY2_BASE) +#define rb_usb2phy2_suspm BIT(7) +#define rb_usb2phy2_pu BIT(0) +#define USB2_PHY2_CAL_CTRL_ADDR (0x8 + USB2PHY2_BASE) +#define USB2_PHY2_PLL_CTRL0_ADDR (0x0 + USB2PHY2_BASE) +#define USB2_PHY2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY2_BASE) + +#define USB2_PHY_BASE(usb32) (usb32 == 0 ? USB2PHY2_BASE : USB2PHY_BASE) +#define USB2_PHY_CTRL_ADDR(usb32) \ + (usb32 == 0 ? USB2_PHY2_CTRL_ADDR : USB2_OTG_PHY_CTRL_ADDR) +#define RB_USB2PHY_SUSPM(usb32) \ + (usb32 == 0 ? rb_usb2phy2_suspm : rb_usb2phy_suspm) +#define RB_USB2PHY_PU(usb32) \ + (usb32 == 0 ? rb_usb2phy2_pu : rb_usb2phy_pu) +#define USB2_PHY_CAL_CTRL_ADDR(usb32) \ + (usb32 == 0 ? USB2_PHY2_CAL_CTRL_ADDR : USB2_CAL_CTRL_ADDR) +#define USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32) \ + (usb32 == 0 ? USB2_PHY2_RX_CHAN_CTRL1_ADDR : USB2_RX_CHAN_CTRL1_ADDR) +#define USB2_PHY_PLL_CTRL0_ADDR(usb32) \ + (usb32 == 0 ? USB2_PHY2_PLL_CTRL0_ADDR : USB2_PLL_CTRL0_ADDR) + +/* + * SATA definitions + */ +#define AHCI_BASE MVEBU_REG(0xE0000) + +#define rh_vsreg_addr (AHCI_BASE + 0x178) +#define rh_vsreg_data (AHCI_BASE + 0x17C) +#define rh_vs0_a (AHCI_BASE + 0xA0) +#define rh_vs0_d (AHCI_BASE + 0xA4) + +#define vphy_sync_pattern_reg 0x224 +#define bs_txd_inv BIT(10) +#define bs_rxd_inv BIT(11) + +#define vphy_loopback_reg0 0x223 +#define bs_phyintf_40bit 0x0C00 +#define bs_pll_ready_tx 0x10 + +#define vphy_power_reg0 0x201 + +#define vphy_calctl_reg 0x202 +#define bs_max_pll_rate BIT(12) + +#define vphy_reserve_reg 0x0e +#define bs_phyctrl_frm_pin BIT(13) + +#define vsata_ctrl_reg 0x00 +#define bs_phy_pu_pll BIT(6) + +/* + * SDIO/eMMC definitions + */ +#define SDIO_BASE MVEBU_REG(0xD8000) + +#define SDIO_HOST_CTRL1_ADDR (SDIO_BASE + 0x28) +#define SDIO_SDHC_FIFO_ADDR (SDIO_BASE + 0x12C) +#define SDIO_CAP_12_ADDR (SDIO_BASE + 0x40) +#define SDIO_ENDIAN_ADDR (SDIO_BASE + 0x1A4) +#define SDIO_PHY_TIMING_ADDR (SDIO_BASE + 0x170) +#define SDIO_PHY_PAD_CTRL0_ADDR (SDIO_BASE + 0x178) +#define SDIO_DLL_RST_ADDR (SDIO_BASE + 0x148) + +#endif /* _COMPHY_A3700_H_ */ diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c new file mode 100644 index 0000000000..344df3bed1 --- /dev/null +++ b/drivers/phy/marvell/comphy_core.c @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <linux/errno.h> +#include <asm/io.h> + +#include "comphy.h" + +#define COMPHY_MAX_CHIP 4 + +DECLARE_GLOBAL_DATA_PTR; + +static char *get_speed_string(u32 speed) +{ + char *speed_strings[] = {"1.25 Gbps", "1.5 Gbps", "2.5 Gbps", + "3.0 Gbps", "3.125 Gbps", "5 Gbps", "6 Gbps", + "6.25 Gbps", "10.31 Gbps" }; + + if (speed < 0 || speed > PHY_SPEED_MAX) + return "invalid"; + + return speed_strings[speed]; +} + +static char *get_type_string(u32 type) +{ + char *type_strings[] = {"UNCONNECTED", "PEX0", "PEX1", "PEX2", "PEX3", + "SATA0", "SATA1", "SATA2", "SATA3", "SGMII0", + "SGMII1", "SGMII2", "SGMII3", "QSGMII", + "USB3_HOST0", "USB3_HOST1", "USB3_DEVICE", + "XAUI0", "XAUI1", "XAUI2", "XAUI3", + "RXAUI0", "RXAUI1", "KR"}; + + if (type < 0 || type > PHY_TYPE_MAX) + return "invalid"; + + return type_strings[type]; +} + +void reg_set(void __iomem *addr, u32 data, u32 mask) +{ + debug("Write to address = %#010lx, data = %#010x (mask = %#010x) - ", + (unsigned long)addr, data, mask); + debug("old value = %#010x ==> ", readl(addr)); + reg_set_silent(addr, data, mask); + debug("new value %#010x\n", readl(addr)); +} + +void reg_set_silent(void __iomem *addr, u32 data, u32 mask) +{ + u32 reg_data; + + reg_data = readl(addr); + reg_data &= ~mask; + reg_data |= data; + writel(reg_data, addr); +} + +void reg_set16(void __iomem *addr, u16 data, u16 mask) +{ + debug("Write to address = %#010lx, data = %#06x (mask = %#06x) - ", + (unsigned long)addr, data, mask); + debug("old value = %#06x ==> ", readw(addr)); + reg_set_silent16(addr, data, mask); + debug("new value %#06x\n", readw(addr)); +} + +void reg_set_silent16(void __iomem *addr, u16 data, u16 mask) +{ + u16 reg_data; + + reg_data = readw(addr); + reg_data &= ~mask; + reg_data |= data; + writew(reg_data, addr); +} + +void comphy_print(struct chip_serdes_phy_config *chip_cfg, + struct comphy_map *comphy_map_data) +{ + u32 lane; + + for (lane = 0; lane < chip_cfg->comphy_lanes_count; + lane++, comphy_map_data++) { + if (comphy_map_data->type == PHY_TYPE_UNCONNECTED) + continue; + + if (comphy_map_data->speed == PHY_SPEED_INVALID) { + printf("Comphy-%d: %-13s\n", lane, + get_type_string(comphy_map_data->type)); + } else { + printf("Comphy-%d: %-13s %-10s\n", lane, + get_type_string(comphy_map_data->type), + get_speed_string(comphy_map_data->speed)); + } + } +} + +static int comphy_probe(struct udevice *dev) +{ + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + struct chip_serdes_phy_config *chip_cfg = dev_get_priv(dev); + struct comphy_map comphy_map_data[MAX_LANE_OPTIONS]; + int subnode; + int lane; + + /* Save base addresses for later use */ + chip_cfg->comphy_base_addr = (void *)dev_get_addr_index(dev, 0); + if (IS_ERR(chip_cfg->comphy_base_addr)) + return PTR_ERR(chip_cfg->comphy_base_addr); + + chip_cfg->hpipe3_base_addr = (void *)dev_get_addr_index(dev, 1); + if (IS_ERR(chip_cfg->hpipe3_base_addr)) + return PTR_ERR(chip_cfg->hpipe3_base_addr); + + chip_cfg->comphy_lanes_count = fdtdec_get_int(blob, node, + "max-lanes", 0); + if (chip_cfg->comphy_lanes_count <= 0) { + dev_err(&dev->dev, "comphy max lanes is wrong\n"); + return -EINVAL; + } + + chip_cfg->comphy_mux_bitcount = fdtdec_get_int(blob, node, + "mux-bitcount", 0); + if (chip_cfg->comphy_mux_bitcount <= 0) { + dev_err(&dev->dev, "comphy mux bit count is wrong\n"); + return -EINVAL; + } + + if (of_device_is_compatible(dev, "marvell,comphy-armada-3700")) + chip_cfg->ptr_comphy_chip_init = comphy_a3700_init; + + if (of_device_is_compatible(dev, "marvell,comphy-cp110")) + chip_cfg->ptr_comphy_chip_init = comphy_cp110_init; + + /* + * Bail out if no chip_init function is defined, e.g. no + * compatible node is found + */ + if (!chip_cfg->ptr_comphy_chip_init) { + dev_err(&dev->dev, "comphy: No compatible DT node found\n"); + return -ENODEV; + } + + lane = 0; + fdt_for_each_subnode(blob, subnode, node) { + /* Skip disabled ports */ + if (!fdtdec_get_is_enabled(blob, subnode)) + continue; + + comphy_map_data[lane].speed = fdtdec_get_int( + blob, subnode, "phy-speed", PHY_TYPE_INVALID); + comphy_map_data[lane].type = fdtdec_get_int( + blob, subnode, "phy-type", PHY_SPEED_INVALID); + comphy_map_data[lane].invert = fdtdec_get_int( + blob, subnode, "phy-invert", PHY_POLARITY_NO_INVERT); + comphy_map_data[lane].clk_src = fdtdec_get_bool(blob, subnode, + "clk-src"); + if (comphy_map_data[lane].type == PHY_TYPE_INVALID) { + printf("no phy type for lane %d, setting lane as unconnected\n", + lane + 1); + } + + lane++; + } + + /* Save comphy index for MultiCP devices (A8K) */ + chip_cfg->comphy_index = dev->seq; + /* PHY power UP sequence */ + chip_cfg->ptr_comphy_chip_init(chip_cfg, comphy_map_data); + /* PHY print SerDes status */ + comphy_print(chip_cfg, comphy_map_data); + + /* Initialize dedicated PHYs (not muxed SerDes lanes) */ + comphy_dedicated_phys_init(); + + return 0; +} + +static const struct udevice_id comphy_ids[] = { + { .compatible = "marvell,mvebu-comphy" }, + { } +}; + +U_BOOT_DRIVER(mvebu_comphy) = { + .name = "mvebu_comphy", + .id = UCLASS_MISC, + .of_match = comphy_ids, + .probe = comphy_probe, + .priv_auto_alloc_size = sizeof(struct chip_serdes_phy_config), +}; diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c new file mode 100644 index 0000000000..25c067d23f --- /dev/null +++ b/drivers/phy/marvell/comphy_cp110.c @@ -0,0 +1,1726 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "comphy.h" +#include "comphy_hpipe.h" +#include "sata.h" +#include "utmi_phy.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define SD_ADDR(base, lane) (base + 0x1000 * lane) +#define HPIPE_ADDR(base, lane) (SD_ADDR(base, lane) + 0x800) +#define COMPHY_ADDR(base, lane) (base + 0x28 * lane) + +struct utmi_phy_data { + void __iomem *utmi_base_addr; + void __iomem *usb_cfg_addr; + void __iomem *utmi_cfg_addr; + u32 utmi_phy_port; +}; + +/* + * For CP-110 we have 2 Selector registers "PHY Selectors", + * and "PIPE Selectors". + * PIPE selector include USB and PCIe options. + * PHY selector include the Ethernet and SATA options, every Ethernet + * option has different options, for example: serdes lane2 had option + * Eth_port_0 that include (SGMII0, XAUI0, RXAUI0, KR) + */ +struct comphy_mux_data cp110_comphy_phy_mux_data[] = { + {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 0 */ + {PHY_TYPE_XAUI2, 0x1}, {PHY_TYPE_SATA1, 0x4} } }, + {4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII3, 0x1}, /* Lane 1 */ + {PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA0, 0x4} } }, + {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 2 */ + {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, + {PHY_TYPE_KR, 0x1}, {PHY_TYPE_SATA0, 0x4} } }, + {8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x1}, /* Lane 3 */ + {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, + {PHY_TYPE_KR, 0x1}, {PHY_TYPE_XAUI1, 0x1}, + {PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SATA1, 0x4} } }, + {7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */ + {PHY_TYPE_XAUI0, 0x1}, {PHY_TYPE_RXAUI0, 0x1}, {PHY_TYPE_KR, 0x1}, + {PHY_TYPE_SGMII2, 0x1}, {PHY_TYPE_XAUI2, 0x1} } }, + {6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_XAUI1, 0x1}, /* Lane 5 */ + {PHY_TYPE_RXAUI1, 0x1}, {PHY_TYPE_SGMII3, 0x1}, + {PHY_TYPE_XAUI3, 0x1}, {PHY_TYPE_SATA1, 0x4} } }, +}; + +struct comphy_mux_data cp110_comphy_pipe_mux_data[] = { + {2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX0, 0x4} } }, /* Lane 0 */ + {4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 1 */ + {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_USB3_DEVICE, 0x2}, + {PHY_TYPE_PEX0, 0x4} } }, + {3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 2 */ + {PHY_TYPE_USB3_HOST0, 0x1}, {PHY_TYPE_PEX0, 0x4} } }, + {3, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 3 */ + {PHY_TYPE_USB3_HOST1, 0x1}, {PHY_TYPE_PEX0, 0x4} } }, + {4, {{PHY_TYPE_UNCONNECTED, 0x0}, /* Lane 4 */ + {PHY_TYPE_USB3_HOST1, 0x1}, + {PHY_TYPE_USB3_DEVICE, 0x2}, {PHY_TYPE_PEX1, 0x4} } }, + {2, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_PEX2, 0x4} } }, /* Lane 5 */ +}; + +static u32 polling_with_timeout(void __iomem *addr, u32 val, + u32 mask, unsigned long usec_timout) +{ + u32 data; + + do { + udelay(1); + data = readl(addr) & mask; + } while (data != val && --usec_timout > 0); + + if (usec_timout == 0) + return data; + + return 0; +} + +static int comphy_pcie_power_up(u32 lane, u32 pcie_width, + bool clk_src, void __iomem *hpipe_base, + void __iomem *comphy_base) +{ + u32 mask, data, ret = 1; + void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); + void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); + void __iomem *addr; + u32 pcie_clk = 0; /* set input by default */ + + debug_enter(); + + /* + * ToDo: + * Add SAR (Sample-At-Reset) configuration for the PCIe clock + * direction. SAR code is currently not ported from Marvell + * U-Boot to mainline version. + * + * SerDes Lane 4/5 got the PCIe ref-clock #1, + * and SerDes Lane 0 got PCIe ref-clock #0 + */ + debug("PCIe clock = %x\n", pcie_clk); + debug("PCIe width = %d\n", pcie_width); + + /* enable PCIe by4 and by2 */ + if (lane == 0) { + if (pcie_width == 4) { + reg_set(comphy_base + COMMON_PHY_SD_CTRL1, + 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X4_EN_OFFSET, + COMMON_PHY_SD_CTRL1_PCIE_X4_EN_MASK); + } else if (pcie_width == 2) { + reg_set(comphy_base + COMMON_PHY_SD_CTRL1, + 0x1 << COMMON_PHY_SD_CTRL1_PCIE_X2_EN_OFFSET, + COMMON_PHY_SD_CTRL1_PCIE_X2_EN_MASK); + } + } + + /* + * If PCIe clock is output and clock source from SerDes lane 5, + * we need to configure the clock-source MUX. + * By default, the clock source is from lane 4 + */ + if (pcie_clk && clk_src && (lane == 5)) { + reg_set((void __iomem *)DFX_DEV_GEN_CTRL12, + 0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET, + DFX_DEV_GEN_PCIE_CLK_SRC_MASK); + } + + debug("stage: RFU configurations - hard reset comphy\n"); + /* RFU configurations - hard reset comphy */ + mask = COMMON_PHY_CFG1_PWR_UP_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; + mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; + data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; + mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; + mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; + data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; + mask |= COMMON_PHY_PHY_MODE_MASK; + data |= 0x0 << COMMON_PHY_PHY_MODE_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* release from hard reset */ + mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; + mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; + data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* Wait 1ms - until band gap and ref clock ready */ + mdelay(1); + /* Start comphy Configuration */ + debug("stage: Comphy configuration\n"); + /* Set PIPE soft reset */ + mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK; + data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET; + /* Set PHY datapath width mode for V0 */ + mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK; + data |= 0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET; + /* Set Data bus width USB mode for V0 */ + mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK; + data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET; + /* Set CORE_CLK output frequency for 250Mhz */ + mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK; + data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask); + /* Set PLL ready delay for 0x2 */ + data = 0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET; + mask = HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK; + if (pcie_width != 1) { + data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET; + mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK; + data |= 0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET; + mask |= HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK; + } + reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG, data, mask); + + /* Set PIPE mode interface to PCIe3 - 0x1 & set lane order */ + data = 0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET; + mask = HPIPE_CLK_SRC_HI_MODE_PIPE_MASK; + if (pcie_width != 1) { + mask |= HPIPE_CLK_SRC_HI_LANE_STRT_MASK; + mask |= HPIPE_CLK_SRC_HI_LANE_MASTER_MASK; + mask |= HPIPE_CLK_SRC_HI_LANE_BREAK_MASK; + if (lane == 0) { + data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET; + data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET; + } else if (lane == (pcie_width - 1)) { + data |= 0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET; + } + } + reg_set(hpipe_addr + HPIPE_CLK_SRC_HI_REG, data, mask); + /* Config update polarity equalization */ + reg_set(hpipe_addr + HPIPE_LANE_EQ_CFG1_REG, + 0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET, + HPIPE_CFG_UPDATE_POLARITY_MASK); + /* Set PIPE version 4 to mode enable */ + reg_set(hpipe_addr + HPIPE_DFE_CTRL_28_REG, + 0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET, + HPIPE_DFE_CTRL_28_PIPE4_MASK); + /* TODO: check if pcie clock is output/input - for bringup use input*/ + /* Enable PIN clock 100M_125M */ + mask = 0; + data = 0; + /* Only if clock is output, configure the clock-source mux */ + if (pcie_clk) { + mask |= HPIPE_MISC_CLK100M_125M_MASK; + data |= 0x1 << HPIPE_MISC_CLK100M_125M_OFFSET; + } + /* + * Set PIN_TXDCLK_2X Clock Frequency Selection for outputs 500MHz + * clock + */ + mask |= HPIPE_MISC_TXDCLK_2X_MASK; + data |= 0x0 << HPIPE_MISC_TXDCLK_2X_OFFSET; + /* Enable 500MHz Clock */ + mask |= HPIPE_MISC_CLK500_EN_MASK; + data |= 0x1 << HPIPE_MISC_CLK500_EN_OFFSET; + if (pcie_clk) { /* output */ + /* Set reference clock comes from group 1 */ + mask |= HPIPE_MISC_REFCLK_SEL_MASK; + data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET; + } else { + /* Set reference clock comes from group 2 */ + mask |= HPIPE_MISC_REFCLK_SEL_MASK; + data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET; + } + reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); + if (pcie_clk) { /* output */ + /* Set reference frequcency select - 0x2 for 25MHz*/ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + } else { + /* Set reference frequcency select - 0x0 for 100MHz*/ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x0 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + } + /* Set PHY mode to PCIe */ + mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; + data |= 0x3 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); + + /* ref clock alignment */ + if (pcie_width != 1) { + mask = HPIPE_LANE_ALIGN_OFF_MASK; + data = 0x0 << HPIPE_LANE_ALIGN_OFF_OFFSET; + reg_set(hpipe_addr + HPIPE_LANE_ALIGN_REG, data, mask); + } + + /* + * Set the amount of time spent in the LoZ state - set for 0x7 only if + * the PCIe clock is output + */ + if (pcie_clk) { + reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL, + 0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET, + HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK); + } + + /* Set Maximal PHY Generation Setting(8Gbps) */ + mask = HPIPE_INTERFACE_GEN_MAX_MASK; + data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET; + /* Set Link Train Mode (Tx training control pins are used) */ + mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK; + data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET; + reg_set(hpipe_addr + HPIPE_INTERFACE_REG, data, mask); + + /* Set Idle_sync enable */ + mask = HPIPE_PCIE_IDLE_SYNC_MASK; + data = 0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET; + /* Select bits for PCIE Gen3(32bit) */ + mask |= HPIPE_PCIE_SEL_BITS_MASK; + data |= 0x2 << HPIPE_PCIE_SEL_BITS_OFFSET; + reg_set(hpipe_addr + HPIPE_PCIE_REG0, data, mask); + + /* Enable Tx_adapt_g1 */ + mask = HPIPE_TX_TRAIN_CTRL_G1_MASK; + data = 0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET; + /* Enable Tx_adapt_gn1 */ + mask |= HPIPE_TX_TRAIN_CTRL_GN1_MASK; + data |= 0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET; + /* Disable Tx_adapt_g0 */ + mask |= HPIPE_TX_TRAIN_CTRL_G0_MASK; + data |= 0x0 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask); + + /* Set reg_tx_train_chk_init */ + mask = HPIPE_TX_TRAIN_CHK_INIT_MASK; + data = 0x0 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET; + /* Enable TX_COE_FM_PIN_PCIE3_EN */ + mask |= HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK; + data |= 0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_REG, data, mask); + + debug("stage: TRx training parameters\n"); + /* Set Preset sweep configurations */ + mask = HPIPE_TX_TX_STATUS_CHECK_MODE_MASK; + data = 0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET; + + mask |= HPIPE_TX_NUM_OF_PRESET_MASK; + data |= 0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET; + + mask |= HPIPE_TX_SWEEP_PRESET_EN_MASK; + data |= 0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_11_REG, data, mask); + + /* Tx train start configuration */ + mask = HPIPE_TX_TRAIN_START_SQ_EN_MASK; + data = 0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET; + + mask |= HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK; + data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET; + + mask |= HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK; + data |= 0x0 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET; + + mask |= HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK; + data |= 0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_5_REG, data, mask); + + /* Enable Tx train P2P */ + mask = HPIPE_TX_TRAIN_P2P_HOLD_MASK; + data = 0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_0_REG, data, mask); + + /* Configure Tx train timeout */ + mask = HPIPE_TRX_TRAIN_TIMER_MASK; + data = 0x17 << HPIPE_TRX_TRAIN_TIMER_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_4_REG, data, mask); + + /* Disable G0/G1/GN1 adaptation */ + mask = HPIPE_TX_TRAIN_CTRL_G1_MASK | HPIPE_TX_TRAIN_CTRL_GN1_MASK + | HPIPE_TX_TRAIN_CTRL_G0_OFFSET; + data = 0; + reg_set(hpipe_addr + HPIPE_TX_TRAIN_CTRL_REG, data, mask); + + /* Disable DTL frequency loop */ + mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK; + data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); + + /* Configure G3 DFE */ + mask = HPIPE_G3_DFE_RES_MASK; + data = 0x3 << HPIPE_G3_DFE_RES_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask); + + /* Force DFE resolution (use GEN table value) */ + mask = HPIPE_DFE_RES_FORCE_MASK; + data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); + + /* Configure initial and final coefficient value for receiver */ + mask = HPIPE_G3_RX_SELMUPI_MASK; + data = 0x1 << HPIPE_G3_RX_SELMUPI_OFFSET; + + mask |= HPIPE_G3_RX_SELMUPF_MASK; + data |= 0x1 << HPIPE_G3_RX_SELMUPF_OFFSET; + + mask |= HPIPE_G3_SETTING_BIT_MASK; + data |= 0x0 << HPIPE_G3_SETTING_BIT_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SETTINGS_1_REG, data, mask); + + /* Trigger sampler enable pulse */ + mask = HPIPE_SMAPLER_MASK; + data = 0x1 << HPIPE_SMAPLER_OFFSET; + reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, data, mask); + udelay(5); + reg_set(hpipe_addr + HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG, 0, mask); + + /* FFE resistor tuning for different bandwidth */ + mask = HPIPE_G3_FFE_DEG_RES_LEVEL_MASK; + data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET; + + mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK; + data |= 0x1 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET; + reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask); + + /* Set phy in root complex mode */ + mask = HPIPE_CFG_PHY_RC_EP_MASK; + data = 0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET; + reg_set(hpipe_addr + HPIPE_LANE_EQU_CONFIG_0_REG, data, mask); + + debug("stage: Comphy power up\n"); + + /* + * For PCIe by4 or by2 - release from reset only after finish to + * configure all lanes + */ + if ((pcie_width == 1) || (lane == (pcie_width - 1))) { + u32 i, start_lane, end_lane; + + if (pcie_width != 1) { + /* allows writing to all lanes in one write */ + reg_set(comphy_base + COMMON_PHY_SD_CTRL1, + 0x0 << + COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET, + COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK); + start_lane = 0; + end_lane = pcie_width; + + /* + * Release from PIPE soft reset + * for PCIe by4 or by2 - release from soft reset + * all lanes - can't use read modify write + */ + reg_set(HPIPE_ADDR(hpipe_base, 0) + + HPIPE_RST_CLK_CTRL_REG, 0x24, 0xffffffff); + } else { + start_lane = lane; + end_lane = lane + 1; + + /* + * Release from PIPE soft reset + * for PCIe by4 or by2 - release from soft reset + * all lanes + */ + reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, + 0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET, + HPIPE_RST_CLK_CTRL_PIPE_RST_MASK); + } + + + if (pcie_width != 1) { + /* disable writing to all lanes with one write */ + reg_set(comphy_base + COMMON_PHY_SD_CTRL1, + 0x3210 << + COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_OFFSET, + COMMON_PHY_SD_CTRL1_COMPHY_0_4_PORT_MASK); + } + + debug("stage: Check PLL\n"); + /* Read lane status */ + for (i = start_lane; i < end_lane; i++) { + addr = HPIPE_ADDR(hpipe_base, i) + + HPIPE_LANE_STATUS1_REG; + data = HPIPE_LANE_STATUS1_PCLK_EN_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 15000); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + hpipe_addr + HPIPE_LANE_STATUS1_REG, + data); + error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n"); + ret = 0; + } + } + } + + debug_exit(); + return ret; +} + +static int comphy_usb3_power_up(u32 lane, void __iomem *hpipe_base, + void __iomem *comphy_base) +{ + u32 mask, data, ret = 1; + void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); + void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); + void __iomem *addr; + + debug_enter(); + debug("stage: RFU configurations - hard reset comphy\n"); + /* RFU configurations - hard reset comphy */ + mask = COMMON_PHY_CFG1_PWR_UP_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; + mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; + data |= 0x1 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; + mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; + mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; + data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; + mask |= COMMON_PHY_PHY_MODE_MASK; + data |= 0x1 << COMMON_PHY_PHY_MODE_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* release from hard reset */ + mask = COMMON_PHY_CFG1_PWR_ON_RESET_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; + mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; + data |= 0x1 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* Wait 1ms - until band gap and ref clock ready */ + mdelay(1); + + /* Start comphy Configuration */ + debug("stage: Comphy configuration\n"); + /* Set PIPE soft reset */ + mask = HPIPE_RST_CLK_CTRL_PIPE_RST_MASK; + data = 0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET; + /* Set PHY datapath width mode for V0 */ + mask |= HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK; + data |= 0x0 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET; + /* Set Data bus width USB mode for V0 */ + mask |= HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK; + data |= 0x0 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET; + /* Set CORE_CLK output frequency for 250Mhz */ + mask |= HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK; + data |= 0x0 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, data, mask); + /* Set PLL ready delay for 0x2 */ + reg_set(hpipe_addr + HPIPE_CLK_SRC_LO_REG, + 0x2 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET, + HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK); + /* Set reference clock to come from group 1 - 25Mhz */ + reg_set(hpipe_addr + HPIPE_MISC_REG, + 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET, + HPIPE_MISC_REFCLK_SEL_MASK); + /* Set reference frequcency select - 0x2 */ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x2 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + /* Set PHY mode to USB - 0x5 */ + mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; + data |= 0x5 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); + /* Set the amount of time spent in the LoZ state - set for 0x7 */ + reg_set(hpipe_addr + HPIPE_GLOBAL_PM_CTRL, + 0x7 << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET, + HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK); + /* Set max PHY generation setting - 5Gbps */ + reg_set(hpipe_addr + HPIPE_INTERFACE_REG, + 0x1 << HPIPE_INTERFACE_GEN_MAX_OFFSET, + HPIPE_INTERFACE_GEN_MAX_MASK); + /* Set select data width 20Bit (SEL_BITS[2:0]) */ + reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, + 0x1 << HPIPE_LOOPBACK_SEL_OFFSET, + HPIPE_LOOPBACK_SEL_MASK); + /* select de-emphasize 3.5db */ + reg_set(hpipe_addr + HPIPE_LANE_CONFIG0_REG, + 0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET, + HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK); + /* override tx margining from the MAC */ + reg_set(hpipe_addr + HPIPE_TST_MODE_CTRL_REG, + 0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET, + HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK); + + /* Start analog paramters from ETP(HW) */ + debug("stage: Analog paramters from ETP(HW)\n"); + /* Set Pin DFE_PAT_DIS -> Bit[1]: PIN_DFE_PAT_DIS = 0x0 */ + mask = HPIPE_LANE_CFG4_DFE_CTRL_MASK; + data = 0x1 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET; + /* Set Override PHY DFE control pins for 0x1 */ + mask |= HPIPE_LANE_CFG4_DFE_OVER_MASK; + data |= 0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET; + /* Set Spread Spectrum Clock Enable fot 0x1 */ + mask |= HPIPE_LANE_CFG4_SSC_CTRL_MASK; + data |= 0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET; + reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask); + /* End of analog parameters */ + + debug("stage: Comphy power up\n"); + /* Release from PIPE soft reset */ + reg_set(hpipe_addr + HPIPE_RST_CLK_CTRL_REG, + 0x0 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET, + HPIPE_RST_CLK_CTRL_PIPE_RST_MASK); + + /* wait 15ms - for comphy calibration done */ + debug("stage: Check PLL\n"); + /* Read lane status */ + addr = hpipe_addr + HPIPE_LANE_STATUS1_REG; + data = HPIPE_LANE_STATUS1_PCLK_EN_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 15000); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + hpipe_addr + HPIPE_LANE_STATUS1_REG, data); + error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n"); + ret = 0; + } + + debug_exit(); + return ret; +} + +static int comphy_sata_power_up(u32 lane, void __iomem *hpipe_base, + void __iomem *comphy_base, int comphy_index) +{ + u32 mask, data, i, ret = 1; + void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); + void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane); + void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); + void __iomem *addr; + void __iomem *sata_base = NULL; + int sata_node = -1; /* Set to -1 in order to read the first sata node */ + + debug_enter(); + + /* + * Assumption - each CP has only one SATA controller + * Calling fdt_node_offset_by_compatible first time (with sata_node = -1 + * will return the first node always. + * In order to parse each CPs SATA node, fdt_node_offset_by_compatible + * must be called again (according to the CP id) + */ + for (i = 0; i < (comphy_index + 1); i++) + sata_node = fdt_node_offset_by_compatible( + gd->fdt_blob, sata_node, "marvell,armada-8k-ahci"); + + if (sata_node == 0) { + error("SATA node not found in FDT\n"); + return 0; + } + + sata_base = (void __iomem *)fdtdec_get_addr_size_auto_noparent( + gd->fdt_blob, sata_node, "reg", 0, NULL, true); + if (sata_base == NULL) { + error("SATA address not found in FDT\n"); + return 0; + } + + debug("SATA address found in FDT %p\n", sata_base); + + debug("stage: MAC configuration - power down comphy\n"); + /* + * MAC configuration powe down comphy use indirect address for + * vendor spesific SATA control register + */ + reg_set(sata_base + SATA3_VENDOR_ADDRESS, + SATA_CONTROL_REG << SATA3_VENDOR_ADDR_OFSSET, + SATA3_VENDOR_ADDR_MASK); + /* SATA 0 power down */ + mask = SATA3_CTRL_SATA0_PD_MASK; + data = 0x1 << SATA3_CTRL_SATA0_PD_OFFSET; + /* SATA 1 power down */ + mask |= SATA3_CTRL_SATA1_PD_MASK; + data |= 0x1 << SATA3_CTRL_SATA1_PD_OFFSET; + /* SATA SSU disable */ + mask |= SATA3_CTRL_SATA1_ENABLE_MASK; + data |= 0x0 << SATA3_CTRL_SATA1_ENABLE_OFFSET; + /* SATA port 1 disable */ + mask |= SATA3_CTRL_SATA_SSU_MASK; + data |= 0x0 << SATA3_CTRL_SATA_SSU_OFFSET; + reg_set(sata_base + SATA3_VENDOR_DATA, data, mask); + + debug("stage: RFU configurations - hard reset comphy\n"); + /* RFU configurations - hard reset comphy */ + mask = COMMON_PHY_CFG1_PWR_UP_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; + mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; + mask |= COMMON_PHY_CFG1_PWR_ON_RESET_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PWR_ON_RESET_OFFSET; + mask |= COMMON_PHY_CFG1_CORE_RSTN_MASK; + data |= 0x0 << COMMON_PHY_CFG1_CORE_RSTN_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* Set select data width 40Bit - SATA mode only */ + reg_set(comphy_addr + COMMON_PHY_CFG6_REG, + 0x1 << COMMON_PHY_CFG6_IF_40_SEL_OFFSET, + COMMON_PHY_CFG6_IF_40_SEL_MASK); + + /* release from hard reset in SD external */ + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + /* Wait 1ms - until band gap and ref clock ready */ + mdelay(1); + + debug("stage: Comphy configuration\n"); + /* Start comphy Configuration */ + /* Set reference clock to comes from group 1 - choose 25Mhz */ + reg_set(hpipe_addr + HPIPE_MISC_REG, + 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET, + HPIPE_MISC_REFCLK_SEL_MASK); + /* Reference frequency select set 1 (for SATA = 25Mhz) */ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + /* PHY mode select (set SATA = 0x0 */ + mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; + data |= 0x0 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); + /* Set max PHY generation setting - 6Gbps */ + reg_set(hpipe_addr + HPIPE_INTERFACE_REG, + 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET, + HPIPE_INTERFACE_GEN_MAX_MASK); + /* Set select data width 40Bit (SEL_BITS[2:0]) */ + reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, + 0x2 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK); + + debug("stage: Analog paramters from ETP(HW)\n"); + /* + * TODO: Set analog paramters from ETP(HW) - for now use the + * default datas + */ + + /* DFE reset sequence */ + reg_set(hpipe_addr + HPIPE_PWR_CTR_REG, + 0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET, + HPIPE_PWR_CTR_RST_DFE_MASK); + reg_set(hpipe_addr + HPIPE_PWR_CTR_REG, + 0x0 << HPIPE_PWR_CTR_RST_DFE_OFFSET, + HPIPE_PWR_CTR_RST_DFE_MASK); + /* SW reset for interupt logic */ + reg_set(hpipe_addr + HPIPE_PWR_CTR_REG, + 0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET, + HPIPE_PWR_CTR_SFT_RST_MASK); + reg_set(hpipe_addr + HPIPE_PWR_CTR_REG, + 0x0 << HPIPE_PWR_CTR_SFT_RST_OFFSET, + HPIPE_PWR_CTR_SFT_RST_MASK); + + debug("stage: Comphy power up\n"); + /* + * MAC configuration power up comphy - power up PLL/TX/RX + * use indirect address for vendor spesific SATA control register + */ + reg_set(sata_base + SATA3_VENDOR_ADDRESS, + SATA_CONTROL_REG << SATA3_VENDOR_ADDR_OFSSET, + SATA3_VENDOR_ADDR_MASK); + /* SATA 0 power up */ + mask = SATA3_CTRL_SATA0_PD_MASK; + data = 0x0 << SATA3_CTRL_SATA0_PD_OFFSET; + /* SATA 1 power up */ + mask |= SATA3_CTRL_SATA1_PD_MASK; + data |= 0x0 << SATA3_CTRL_SATA1_PD_OFFSET; + /* SATA SSU enable */ + mask |= SATA3_CTRL_SATA1_ENABLE_MASK; + data |= 0x1 << SATA3_CTRL_SATA1_ENABLE_OFFSET; + /* SATA port 1 enable */ + mask |= SATA3_CTRL_SATA_SSU_MASK; + data |= 0x1 << SATA3_CTRL_SATA_SSU_OFFSET; + reg_set(sata_base + SATA3_VENDOR_DATA, data, mask); + + /* MBUS request size and interface select register */ + reg_set(sata_base + SATA3_VENDOR_ADDRESS, + SATA_MBUS_SIZE_SELECT_REG << SATA3_VENDOR_ADDR_OFSSET, + SATA3_VENDOR_ADDR_MASK); + /* Mbus regret enable */ + reg_set(sata_base + SATA3_VENDOR_DATA, + 0x1 << SATA_MBUS_REGRET_EN_OFFSET, SATA_MBUS_REGRET_EN_MASK); + + debug("stage: Check PLL\n"); + + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_PLL_TX_MASK & + SD_EXTERNAL_STATUS0_PLL_RX_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 15000); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + hpipe_addr + HPIPE_LANE_STATUS1_REG, data); + error("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n", + (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK), + (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK)); + ret = 0; + } + + debug_exit(); + return ret; +} + +static int comphy_sgmii_power_up(u32 lane, u32 sgmii_speed, + void __iomem *hpipe_base, + void __iomem *comphy_base) +{ + u32 mask, data, ret = 1; + void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); + void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane); + void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); + void __iomem *addr; + + debug_enter(); + debug("stage: RFU configurations - hard reset comphy\n"); + /* RFU configurations - hard reset comphy */ + mask = COMMON_PHY_CFG1_PWR_UP_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; + mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */ + mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK; + mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK; + if (sgmii_speed == PHY_SPEED_1_25G) { + data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET; + data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET; + } else { + /* 3.125G */ + data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET; + data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET; + } + mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK; + data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK; + data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK; + data |= 1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask); + + /* release from hard reset */ + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + /* release from hard reset */ + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + + /* Wait 1ms - until band gap and ref clock ready */ + mdelay(1); + + /* Start comphy Configuration */ + debug("stage: Comphy configuration\n"); + /* set reference clock */ + mask = HPIPE_MISC_REFCLK_SEL_MASK; + data = 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); + /* Power and PLL Control */ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; + data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); + /* Loopback register */ + mask = HPIPE_LOOPBACK_SEL_MASK; + data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask); + /* rx control 1 */ + mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK; + data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET; + mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK; + data |= 0x0 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask); + /* DTL Control */ + mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK; + data = 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); + + /* Set analog paramters from ETP(HW) - for now use the default datas */ + debug("stage: Analog paramters from ETP(HW)\n"); + + reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, + 0x1 << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET, + HPIPE_G1_SET_0_G1_TX_EMPH1_MASK); + + debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n"); + /* SERDES External Configuration */ + mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask); + + /* check PLL rx & tx ready */ + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_PLL_RX_MASK | + SD_EXTERNAL_STATUS0_PLL_TX_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 15000); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data); + error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n", + (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK), + (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)); + ret = 0; + } + + /* RX init */ + mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + /* check that RX init done */ + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_RX_INIT_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 100); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data); + error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n"); + ret = 0; + } + + debug("stage: RF Reset\n"); + /* RF Reset */ + mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + debug_exit(); + return ret; +} + +static int comphy_kr_power_up(u32 lane, void __iomem *hpipe_base, + void __iomem *comphy_base) +{ + u32 mask, data, ret = 1; + void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); + void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane); + void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); + void __iomem *addr; + + debug_enter(); + debug("stage: RFU configurations - hard reset comphy\n"); + /* RFU configurations - hard reset comphy */ + mask = COMMON_PHY_CFG1_PWR_UP_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; + mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + /* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */ + mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK; + data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK; + data |= 0xE << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK; + data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK; + data |= 0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK; + data |= 0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask); + + /* release from hard reset */ + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + + /* Wait 1ms - until band gap and ref clock ready */ + mdelay(1); + + /* Start comphy Configuration */ + debug("stage: Comphy configuration\n"); + /* set reference clock */ + mask = HPIPE_MISC_ICP_FORCE_MASK; + data = 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET; + mask |= HPIPE_MISC_REFCLK_SEL_MASK; + data |= 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask); + /* Power and PLL Control */ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; + data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); + /* Loopback register */ + mask = HPIPE_LOOPBACK_SEL_MASK; + data = 0x1 << HPIPE_LOOPBACK_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, data, mask); + /* rx control 1 */ + mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK; + data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET; + mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK; + data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask); + /* DTL Control */ + mask = HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK; + data = 0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, data, mask); + + /* Set analog paramters from ETP(HW) */ + debug("stage: Analog paramters from ETP(HW)\n"); + /* SERDES External Configuration 2 */ + mask = SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, data, mask); + /* 0x7-DFE Resolution control */ + mask = HPIPE_DFE_RES_FORCE_MASK; + data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask); + /* 0xd-G1_Setting_0 */ + mask = HPIPE_G1_SET_0_G1_TX_AMP_MASK; + data = 0x1c << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET; + mask |= HPIPE_G1_SET_0_G1_TX_EMPH1_MASK; + data |= 0xe << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, data, mask); + /* Genration 1 setting 2 (G1_Setting_2) */ + mask = HPIPE_G1_SET_2_G1_TX_EMPH0_MASK; + data = 0x0 << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET; + mask |= HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK; + data |= 0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SET_2_REG, data, mask); + /* Transmitter Slew Rate Control register (tx_reg1) */ + mask = HPIPE_TX_REG1_TX_EMPH_RES_MASK; + data = 0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET; + mask |= HPIPE_TX_REG1_SLC_EN_MASK; + data |= 0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_TX_REG1_REG, data, mask); + /* Impedance Calibration Control register (cal_reg1) */ + mask = HPIPE_CAL_REG_1_EXT_TXIMP_MASK; + data = 0xe << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET; + mask |= HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK; + data |= 0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_CAL_REG1_REG, data, mask); + /* Generation 1 Setting 5 (g1_setting_5) */ + mask = HPIPE_G1_SETTING_5_G1_ICP_MASK; + data = 0 << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SETTING_5_REG, data, mask); + /* 0xE-G1_Setting_1 */ + mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK; + data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask); + /* 0xA-DFE_Reg3 */ + mask = HPIPE_DFE_F3_F5_DFE_EN_MASK; + data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET; + mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK; + data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask); + + /* 0x111-G1_Setting_4 */ + mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK; + data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask); + /* Genration 1 setting 3 (G1_Setting_3) */ + mask = HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK; + data = 0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask); + + debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n"); + /* SERDES External Configuration */ + mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask); + + + /* check PLL rx & tx ready */ + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_PLL_RX_MASK | + SD_EXTERNAL_STATUS0_PLL_TX_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 15000); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data); + error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n", + (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK), + (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)); + ret = 0; + } + + /* RX init */ + mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + + /* check that RX init done */ + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_RX_INIT_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 100); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data); + error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n"); + ret = 0; + } + + debug("stage: RF Reset\n"); + /* RF Reset */ + mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + debug_exit(); + return ret; +} + +static int comphy_rxauii_power_up(u32 lane, void __iomem *hpipe_base, + void __iomem *comphy_base) +{ + u32 mask, data, ret = 1; + void __iomem *hpipe_addr = HPIPE_ADDR(hpipe_base, lane); + void __iomem *sd_ip_addr = SD_ADDR(hpipe_base, lane); + void __iomem *comphy_addr = COMPHY_ADDR(comphy_base, lane); + void __iomem *addr; + + debug_enter(); + debug("stage: RFU configurations - hard reset comphy\n"); + /* RFU configurations - hard reset comphy */ + mask = COMMON_PHY_CFG1_PWR_UP_MASK; + data = 0x1 << COMMON_PHY_CFG1_PWR_UP_OFFSET; + mask |= COMMON_PHY_CFG1_PIPE_SELECT_MASK; + data |= 0x0 << COMMON_PHY_CFG1_PIPE_SELECT_OFFSET; + reg_set(comphy_addr + COMMON_PHY_CFG1_REG, data, mask); + + if (lane == 2) { + reg_set(comphy_base + COMMON_PHY_SD_CTRL1, + 0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET, + COMMON_PHY_SD_CTRL1_RXAUI0_MASK); + } + if (lane == 4) { + reg_set(comphy_base + COMMON_PHY_SD_CTRL1, + 0x1 << COMMON_PHY_SD_CTRL1_RXAUI1_OFFSET, + COMMON_PHY_SD_CTRL1_RXAUI1_MASK); + } + + /* Select Baud Rate of Comphy And PD_PLL/Tx/Rx */ + mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK; + data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK; + data |= 0xB << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask); + + /* release from hard reset */ + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK; + data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + /* Wait 1ms - until band gap and ref clock ready */ + mdelay(1); + + /* Start comphy Configuration */ + debug("stage: Comphy configuration\n"); + /* set reference clock */ + reg_set(hpipe_addr + HPIPE_MISC_REG, + 0x0 << HPIPE_MISC_REFCLK_SEL_OFFSET, + HPIPE_MISC_REFCLK_SEL_MASK); + /* Power and PLL Control */ + mask = HPIPE_PWR_PLL_REF_FREQ_MASK; + data = 0x1 << HPIPE_PWR_PLL_REF_FREQ_OFFSET; + mask |= HPIPE_PWR_PLL_PHY_MODE_MASK; + data |= 0x4 << HPIPE_PWR_PLL_PHY_MODE_OFFSET; + reg_set(hpipe_addr + HPIPE_PWR_PLL_REG, data, mask); + /* Loopback register */ + reg_set(hpipe_addr + HPIPE_LOOPBACK_REG, + 0x1 << HPIPE_LOOPBACK_SEL_OFFSET, HPIPE_LOOPBACK_SEL_MASK); + /* rx control 1 */ + mask = HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK; + data = 0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET; + mask |= HPIPE_RX_CONTROL_1_CLK8T_EN_MASK; + data |= 0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_RX_CONTROL_1_REG, data, mask); + /* DTL Control */ + reg_set(hpipe_addr + HPIPE_PWR_CTR_DTL_REG, + 0x0 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET, + HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK); + + /* Set analog paramters from ETP(HW) */ + debug("stage: Analog paramters from ETP(HW)\n"); + /* SERDES External Configuration 2 */ + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG2_REG, + 0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET, + SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK); + /* 0x7-DFE Resolution control */ + reg_set(hpipe_addr + HPIPE_DFE_REG0, 0x1 << HPIPE_DFE_RES_FORCE_OFFSET, + HPIPE_DFE_RES_FORCE_MASK); + /* 0xd-G1_Setting_0 */ + reg_set(hpipe_addr + HPIPE_G1_SET_0_REG, + 0xd << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET, + HPIPE_G1_SET_0_G1_TX_EMPH1_MASK); + /* 0xE-G1_Setting_1 */ + mask = HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK; + data = 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET; + mask |= HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK; + data |= 0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SET_1_REG, data, mask); + /* 0xA-DFE_Reg3 */ + mask = HPIPE_DFE_F3_F5_DFE_EN_MASK; + data = 0x0 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET; + mask |= HPIPE_DFE_F3_F5_DFE_CTRL_MASK; + data |= 0x0 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET; + reg_set(hpipe_addr + HPIPE_DFE_F3_F5_REG, data, mask); + + /* 0x111-G1_Setting_4 */ + mask = HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK; + data = 0x1 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET; + reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask); + + debug("stage: RFU configurations- Power Up PLL,Tx,Rx\n"); + /* SERDES External Configuration */ + mask = SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK; + data = 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET; + mask |= SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG0_REG, data, mask); + + + /* check PLL rx & tx ready */ + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_PLL_RX_MASK | + SD_EXTERNAL_STATUS0_PLL_TX_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 15000); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data); + error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n", + (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK), + (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK)); + ret = 0; + } + + /* RX init */ + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, + 0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET, + SD_EXTERNAL_CONFIG1_RX_INIT_MASK); + + /* check that RX init done */ + addr = sd_ip_addr + SD_EXTERNAL_STATUS0_REG; + data = SD_EXTERNAL_STATUS0_RX_INIT_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 100); + if (data != 0) { + debug("Read from reg = %p - value = 0x%x\n", + sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data); + error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n"); + ret = 0; + } + + debug("stage: RF Reset\n"); + /* RF Reset */ + mask = SD_EXTERNAL_CONFIG1_RX_INIT_MASK; + data = 0x0 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET; + mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK; + data |= 0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET; + reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask); + + debug_exit(); + return ret; +} + +static void comphy_utmi_power_down(u32 utmi_index, void __iomem *utmi_base_addr, + void __iomem *usb_cfg_addr, + void __iomem *utmi_cfg_addr, + u32 utmi_phy_port) +{ + u32 mask, data; + + debug_enter(); + debug("stage: UTMI %d - Power down transceiver (power down Phy), Power down PLL, and SuspendDM\n", + utmi_index); + /* Power down UTMI PHY */ + reg_set(utmi_cfg_addr, 0x0 << UTMI_PHY_CFG_PU_OFFSET, + UTMI_PHY_CFG_PU_MASK); + + /* + * If UTMI connected to USB Device, configure mux prior to PHY init + * (Device can be connected to UTMI0 or to UTMI1) + */ + if (utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) { + debug("stage: UTMI %d - Enable Device mode and configure UTMI mux\n", + utmi_index); + /* USB3 Device UTMI enable */ + mask = UTMI_USB_CFG_DEVICE_EN_MASK; + data = 0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET; + /* USB3 Device UTMI MUX */ + mask |= UTMI_USB_CFG_DEVICE_MUX_MASK; + data |= utmi_index << UTMI_USB_CFG_DEVICE_MUX_OFFSET; + reg_set(usb_cfg_addr, data, mask); + } + + /* Set Test suspendm mode */ + mask = UTMI_CTRL_STATUS0_SUSPENDM_MASK; + data = 0x1 << UTMI_CTRL_STATUS0_SUSPENDM_OFFSET; + /* Enable Test UTMI select */ + mask |= UTMI_CTRL_STATUS0_TEST_SEL_MASK; + data |= 0x1 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET; + reg_set(utmi_base_addr + UTMI_CTRL_STATUS0_REG, data, mask); + + /* Wait for UTMI power down */ + mdelay(1); + + debug_exit(); + return; +} + +static void comphy_utmi_phy_config(u32 utmi_index, void __iomem *utmi_base_addr, + void __iomem *usb_cfg_addr, + void __iomem *utmi_cfg_addr, + u32 utmi_phy_port) +{ + u32 mask, data; + + debug_exit(); + debug("stage: Configure UTMI PHY %d registers\n", utmi_index); + /* Reference Clock Divider Select */ + mask = UTMI_PLL_CTRL_REFDIV_MASK; + data = 0x5 << UTMI_PLL_CTRL_REFDIV_OFFSET; + /* Feedback Clock Divider Select - 90 for 25Mhz*/ + mask |= UTMI_PLL_CTRL_FBDIV_MASK; + data |= 0x60 << UTMI_PLL_CTRL_FBDIV_OFFSET; + /* Select LPFR - 0x0 for 25Mhz/5=5Mhz*/ + mask |= UTMI_PLL_CTRL_SEL_LPFR_MASK; + data |= 0x0 << UTMI_PLL_CTRL_SEL_LPFR_OFFSET; + reg_set(utmi_base_addr + UTMI_PLL_CTRL_REG, data, mask); + + /* Impedance Calibration Threshold Setting */ + reg_set(utmi_base_addr + UTMI_CALIB_CTRL_REG, + 0x6 << UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET, + UTMI_CALIB_CTRL_IMPCAL_VTH_MASK); + + /* Set LS TX driver strength coarse control */ + mask = UTMI_TX_CH_CTRL_DRV_EN_LS_MASK; + data = 0x3 << UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET; + /* Set LS TX driver fine adjustment */ + mask |= UTMI_TX_CH_CTRL_IMP_SEL_LS_MASK; + data |= 0x3 << UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET; + reg_set(utmi_base_addr + UTMI_TX_CH_CTRL_REG, data, mask); + + /* Enable SQ */ + mask = UTMI_RX_CH_CTRL0_SQ_DET_MASK; + data = 0x0 << UTMI_RX_CH_CTRL0_SQ_DET_OFFSET; + /* Enable analog squelch detect */ + mask |= UTMI_RX_CH_CTRL0_SQ_ANA_DTC_MASK; + data |= 0x1 << UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET; + reg_set(utmi_base_addr + UTMI_RX_CH_CTRL0_REG, data, mask); + + /* Set External squelch calibration number */ + mask = UTMI_RX_CH_CTRL1_SQ_AMP_CAL_MASK; + data = 0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET; + /* Enable the External squelch calibration */ + mask |= UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_MASK; + data |= 0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET; + reg_set(utmi_base_addr + UTMI_RX_CH_CTRL1_REG, data, mask); + + /* Set Control VDAT Reference Voltage - 0.325V */ + mask = UTMI_CHGDTC_CTRL_VDAT_MASK; + data = 0x1 << UTMI_CHGDTC_CTRL_VDAT_OFFSET; + /* Set Control VSRC Reference Voltage - 0.6V */ + mask |= UTMI_CHGDTC_CTRL_VSRC_MASK; + data |= 0x1 << UTMI_CHGDTC_CTRL_VSRC_OFFSET; + reg_set(utmi_base_addr + UTMI_CHGDTC_CTRL_REG, data, mask); + + debug_exit(); + return; +} + +static int comphy_utmi_power_up(u32 utmi_index, void __iomem *utmi_base_addr, + void __iomem *usb_cfg_addr, + void __iomem *utmi_cfg_addr, u32 utmi_phy_port) +{ + u32 data, mask, ret = 1; + void __iomem *addr; + + debug_enter(); + debug("stage: UTMI %d - Power up transceiver(Power up Phy), and exit SuspendDM\n", + utmi_index); + /* Power UP UTMI PHY */ + reg_set(utmi_cfg_addr, 0x1 << UTMI_PHY_CFG_PU_OFFSET, + UTMI_PHY_CFG_PU_MASK); + /* Disable Test UTMI select */ + reg_set(utmi_base_addr + UTMI_CTRL_STATUS0_REG, + 0x0 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET, + UTMI_CTRL_STATUS0_TEST_SEL_MASK); + + debug("stage: Polling for PLL and impedance calibration done, and PLL ready done\n"); + addr = utmi_base_addr + UTMI_CALIB_CTRL_REG; + data = UTMI_CALIB_CTRL_IMPCAL_DONE_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 100); + if (data != 0) { + error("Impedance calibration is not done\n"); + debug("Read from reg = %p - value = 0x%x\n", addr, data); + ret = 0; + } + + data = UTMI_CALIB_CTRL_PLLCAL_DONE_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 100); + if (data != 0) { + error("PLL calibration is not done\n"); + debug("Read from reg = %p - value = 0x%x\n", addr, data); + ret = 0; + } + + addr = utmi_base_addr + UTMI_PLL_CTRL_REG; + data = UTMI_PLL_CTRL_PLL_RDY_MASK; + mask = data; + data = polling_with_timeout(addr, data, mask, 100); + if (data != 0) { + error("PLL is not ready\n"); + debug("Read from reg = %p - value = 0x%x\n", addr, data); + ret = 0; + } + + if (ret) + debug("Passed\n"); + else + debug("\n"); + + debug_exit(); + return ret; +} + +/* + * comphy_utmi_phy_init initialize the UTMI PHY + * the init split in 3 parts: + * 1. Power down transceiver and PLL + * 2. UTMI PHY configure + * 3. Powe up transceiver and PLL + * Note: - Power down/up should be once for both UTMI PHYs + * - comphy_dedicated_phys_init call this function if at least there is + * one UTMI PHY exists in FDT blob. access to cp110_utmi_data[0] is + * legal + */ +static void comphy_utmi_phy_init(u32 utmi_phy_count, + struct utmi_phy_data *cp110_utmi_data) +{ + u32 i; + + debug_enter(); + /* UTMI Power down */ + for (i = 0; i < utmi_phy_count; i++) { + comphy_utmi_power_down(i, cp110_utmi_data[i].utmi_base_addr, + cp110_utmi_data[i].usb_cfg_addr, + cp110_utmi_data[i].utmi_cfg_addr, + cp110_utmi_data[i].utmi_phy_port); + } + /* PLL Power down */ + debug("stage: UTMI PHY power down PLL\n"); + for (i = 0; i < utmi_phy_count; i++) { + reg_set(cp110_utmi_data[i].usb_cfg_addr, + 0x0 << UTMI_USB_CFG_PLL_OFFSET, UTMI_USB_CFG_PLL_MASK); + } + /* UTMI configure */ + for (i = 0; i < utmi_phy_count; i++) { + comphy_utmi_phy_config(i, cp110_utmi_data[i].utmi_base_addr, + cp110_utmi_data[i].usb_cfg_addr, + cp110_utmi_data[i].utmi_cfg_addr, + cp110_utmi_data[i].utmi_phy_port); + } + /* UTMI Power up */ + for (i = 0; i < utmi_phy_count; i++) { + if (!comphy_utmi_power_up(i, cp110_utmi_data[i].utmi_base_addr, + cp110_utmi_data[i].usb_cfg_addr, + cp110_utmi_data[i].utmi_cfg_addr, + cp110_utmi_data[i].utmi_phy_port)) { + error("Failed to initialize UTMI PHY %d\n", i); + continue; + } + printf("UTMI PHY %d initialized to ", i); + if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) + printf("USB Device\n"); + else + printf("USB Host%d\n", + cp110_utmi_data[i].utmi_phy_port); + } + /* PLL Power up */ + debug("stage: UTMI PHY power up PLL\n"); + for (i = 0; i < utmi_phy_count; i++) { + reg_set(cp110_utmi_data[i].usb_cfg_addr, + 0x1 << UTMI_USB_CFG_PLL_OFFSET, UTMI_USB_CFG_PLL_MASK); + } + + debug_exit(); + return; +} + +/* + * comphy_dedicated_phys_init initialize the dedicated PHYs + * - not muxed SerDes lanes e.g. UTMI PHY + */ +void comphy_dedicated_phys_init(void) +{ + struct utmi_phy_data cp110_utmi_data[MAX_UTMI_PHY_COUNT]; + int node; + int i; + + debug_enter(); + debug("Initialize USB UTMI PHYs\n"); + + /* Find the UTMI phy node in device tree and go over them */ + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + "marvell,mvebu-utmi-2.6.0"); + + i = 0; + while (node > 0) { + /* get base address of UTMI phy */ + cp110_utmi_data[i].utmi_base_addr = + (void __iomem *)fdtdec_get_addr_size_auto_noparent( + gd->fdt_blob, node, "reg", 0, NULL, true); + if (cp110_utmi_data[i].utmi_base_addr == NULL) { + error("UTMI PHY base address is invalid\n"); + i++; + continue; + } + + /* get usb config address */ + cp110_utmi_data[i].usb_cfg_addr = + (void __iomem *)fdtdec_get_addr_size_auto_noparent( + gd->fdt_blob, node, "reg", 1, NULL, true); + if (cp110_utmi_data[i].usb_cfg_addr == NULL) { + error("UTMI PHY base address is invalid\n"); + i++; + continue; + } + + /* get UTMI config address */ + cp110_utmi_data[i].utmi_cfg_addr = + (void __iomem *)fdtdec_get_addr_size_auto_noparent( + gd->fdt_blob, node, "reg", 2, NULL, true); + if (cp110_utmi_data[i].utmi_cfg_addr == NULL) { + error("UTMI PHY base address is invalid\n"); + i++; + continue; + } + + /* + * get the port number (to check if the utmi connected to + * host/device) + */ + cp110_utmi_data[i].utmi_phy_port = fdtdec_get_int( + gd->fdt_blob, node, "utmi-port", UTMI_PHY_INVALID); + if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_INVALID) { + error("UTMI PHY port type is invalid\n"); + i++; + continue; + } + + node = fdt_node_offset_by_compatible( + gd->fdt_blob, node, "marvell,mvebu-utmi-2.6.0"); + i++; + } + + if (i > 0) + comphy_utmi_phy_init(i, cp110_utmi_data); + + debug_exit(); +} + +static void comphy_mux_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *serdes_map) +{ + void __iomem *comphy_base_addr; + struct comphy_map comphy_map_pipe_data[MAX_LANE_OPTIONS]; + struct comphy_map comphy_map_phy_data[MAX_LANE_OPTIONS]; + u32 lane, comphy_max_count; + + comphy_max_count = ptr_chip_cfg->comphy_lanes_count; + comphy_base_addr = ptr_chip_cfg->comphy_base_addr; + + /* + * Copy the SerDes map configuration for PIPE map and PHY map + * the comphy_mux_init modify the type of the lane if the type + * is not valid because we have 2 selectores run the + * comphy_mux_init twice and after that update the original + * serdes_map + */ + for (lane = 0; lane < comphy_max_count; lane++) { + comphy_map_pipe_data[lane].type = serdes_map[lane].type; + comphy_map_pipe_data[lane].speed = serdes_map[lane].speed; + comphy_map_phy_data[lane].type = serdes_map[lane].type; + comphy_map_phy_data[lane].speed = serdes_map[lane].speed; + } + ptr_chip_cfg->mux_data = cp110_comphy_phy_mux_data; + comphy_mux_init(ptr_chip_cfg, comphy_map_phy_data, + comphy_base_addr + COMMON_SELECTOR_PHY_OFFSET); + + ptr_chip_cfg->mux_data = cp110_comphy_pipe_mux_data; + comphy_mux_init(ptr_chip_cfg, comphy_map_pipe_data, + comphy_base_addr + COMMON_SELECTOR_PIPE_OFFSET); + /* Fix the type after check the PHY and PIPE configuration */ + for (lane = 0; lane < comphy_max_count; lane++) { + if ((comphy_map_pipe_data[lane].type == PHY_TYPE_UNCONNECTED) && + (comphy_map_phy_data[lane].type == PHY_TYPE_UNCONNECTED)) + serdes_map[lane].type = PHY_TYPE_UNCONNECTED; + } +} + +int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, + struct comphy_map *serdes_map) +{ + struct comphy_map *ptr_comphy_map; + void __iomem *comphy_base_addr, *hpipe_base_addr; + u32 comphy_max_count, lane, ret = 0; + u32 pcie_width = 0; + + debug_enter(); + + comphy_max_count = ptr_chip_cfg->comphy_lanes_count; + comphy_base_addr = ptr_chip_cfg->comphy_base_addr; + hpipe_base_addr = ptr_chip_cfg->hpipe3_base_addr; + + /* Config Comphy mux configuration */ + comphy_mux_cp110_init(ptr_chip_cfg, serdes_map); + + /* Check if the first 4 lanes configured as By-4 */ + for (lane = 0, ptr_comphy_map = serdes_map; lane < 4; + lane++, ptr_comphy_map++) { + if (ptr_comphy_map->type != PHY_TYPE_PEX0) + break; + pcie_width++; + } + + for (lane = 0, ptr_comphy_map = serdes_map; lane < comphy_max_count; + lane++, ptr_comphy_map++) { + debug("Initialize serdes number %d\n", lane); + debug("Serdes type = 0x%x\n", ptr_comphy_map->type); + if (lane == 4) { + /* + * PCIe lanes above the first 4 lanes, can be only + * by1 + */ + pcie_width = 1; + } + switch (ptr_comphy_map->type) { + case PHY_TYPE_UNCONNECTED: + continue; + break; + case PHY_TYPE_PEX0: + case PHY_TYPE_PEX1: + case PHY_TYPE_PEX2: + case PHY_TYPE_PEX3: + ret = comphy_pcie_power_up( + lane, pcie_width, ptr_comphy_map->clk_src, + hpipe_base_addr, comphy_base_addr); + break; + case PHY_TYPE_SATA0: + case PHY_TYPE_SATA1: + case PHY_TYPE_SATA2: + case PHY_TYPE_SATA3: + ret = comphy_sata_power_up( + lane, hpipe_base_addr, comphy_base_addr, + ptr_chip_cfg->comphy_index); + break; + case PHY_TYPE_USB3_HOST0: + case PHY_TYPE_USB3_HOST1: + case PHY_TYPE_USB3_DEVICE: + ret = comphy_usb3_power_up(lane, hpipe_base_addr, + comphy_base_addr); + break; + case PHY_TYPE_SGMII0: + case PHY_TYPE_SGMII1: + case PHY_TYPE_SGMII2: + case PHY_TYPE_SGMII3: + if (ptr_comphy_map->speed == PHY_SPEED_INVALID) { + debug("Warning: SGMII PHY speed in lane %d is invalid, set PHY speed to 1.25G\n", + lane); + ptr_comphy_map->speed = PHY_SPEED_1_25G; + } + ret = comphy_sgmii_power_up( + lane, ptr_comphy_map->speed, hpipe_base_addr, + comphy_base_addr); + break; + case PHY_TYPE_KR: + ret = comphy_kr_power_up(lane, hpipe_base_addr, + comphy_base_addr); + break; + case PHY_TYPE_RXAUI0: + case PHY_TYPE_RXAUI1: + ret = comphy_rxauii_power_up(lane, hpipe_base_addr, + comphy_base_addr); + break; + default: + debug("Unknown SerDes type, skip initialize SerDes %d\n", + lane); + break; + } + if (ret == 0) { + /* + * If interface wans't initialiuzed, set the lane to + * PHY_TYPE_UNCONNECTED state. + */ + ptr_comphy_map->type = PHY_TYPE_UNCONNECTED; + error("PLL is not locked - Failed to initialize lane %d\n", + lane); + } + } + + debug_exit(); + return 0; +} diff --git a/drivers/phy/marvell/comphy_hpipe.h b/drivers/phy/marvell/comphy_hpipe.h new file mode 100644 index 0000000000..179e910a0c --- /dev/null +++ b/drivers/phy/marvell/comphy_hpipe.h @@ -0,0 +1,420 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _COMPHY_HPIPE_H_ +#define _COMPHY_HPIPE_H_ + +/* SerDes IP register */ +#define SD_EXTERNAL_CONFIG0_REG 0 +#define SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET 1 +#define SD_EXTERNAL_CONFIG0_SD_PU_PLL_MASK \ + (1 << SD_EXTERNAL_CONFIG0_SD_PU_PLL_OFFSET) +#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET 3 +#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_MASK \ + (0xf << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET) +#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET 7 +#define SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_MASK \ + (0xf << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET) +#define SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET 11 +#define SD_EXTERNAL_CONFIG0_SD_PU_RX_MASK \ + (1 << SD_EXTERNAL_CONFIG0_SD_PU_RX_OFFSET) +#define SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET 12 +#define SD_EXTERNAL_CONFIG0_SD_PU_TX_MASK \ + (1 << SD_EXTERNAL_CONFIG0_SD_PU_TX_OFFSET) +#define SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET 14 +#define SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_MASK \ + (1 << SD_EXTERNAL_CONFIG0_HALF_BUS_MODE_OFFSET) +#define SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET 15 +#define SD_EXTERNAL_CONFIG0_MEDIA_MODE_MASK \ + (0x1 << SD_EXTERNAL_CONFIG0_MEDIA_MODE_OFFSET) + +#define SD_EXTERNAL_CONFIG1_REG 0x4 +#define SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET 3 +#define SD_EXTERNAL_CONFIG1_RESET_IN_MASK \ + (0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET) +#define SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET 4 +#define SD_EXTERNAL_CONFIG1_RX_INIT_MASK \ + (0x1 << SD_EXTERNAL_CONFIG1_RX_INIT_OFFSET) +#define SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET 5 +#define SD_EXTERNAL_CONFIG1_RESET_CORE_MASK \ + (0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET) +#define SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET 6 +#define SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK \ + (0x1 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET) + +#define SD_EXTERNAL_CONFIG2_REG 0x8 +#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET 4 +#define SD_EXTERNAL_CONFIG2_PIN_DFE_EN_MASK \ + (0x1 << SD_EXTERNAL_CONFIG2_PIN_DFE_EN_OFFSET) + +#define SD_EXTERNAL_STATUS0_REG 0x18 +#define SD_EXTERNAL_STATUS0_PLL_TX_OFFSET 2 +#define SD_EXTERNAL_STATUS0_PLL_TX_MASK \ + (0x1 << SD_EXTERNAL_STATUS0_PLL_TX_OFFSET) +#define SD_EXTERNAL_STATUS0_PLL_RX_OFFSET 3 +#define SD_EXTERNAL_STATUS0_PLL_RX_MASK \ + (0x1 << SD_EXTERNAL_STATUS0_PLL_RX_OFFSET) +#define SD_EXTERNAL_STATUS0_RX_INIT_OFFSET 4 +#define SD_EXTERNAL_STATUS0_RX_INIT_MASK \ + (0x1 << SD_EXTERNAL_STATUS0_RX_INIT_OFFSET) +#define SD_EXTERNAL_STATUS0_RF_RESET_IN_OFFSET 6 +#define SD_EXTERNAL_STATUS0_RF_RESET_IN_MASK \ + (0x1 << SD_EXTERNAL_STATUS0_RF_RESET_IN_OFFSET) + +/* HPIPE register */ +#define HPIPE_PWR_PLL_REG 0x4 +#define HPIPE_PWR_PLL_REF_FREQ_OFFSET 0 +#define HPIPE_PWR_PLL_REF_FREQ_MASK \ + (0x1f << HPIPE_PWR_PLL_REF_FREQ_OFFSET) +#define HPIPE_PWR_PLL_PHY_MODE_OFFSET 5 +#define HPIPE_PWR_PLL_PHY_MODE_MASK \ + (0x7 << HPIPE_PWR_PLL_PHY_MODE_OFFSET) + +#define HPIPE_KVCO_CALIB_CTRL_REG 0x8 +#define HPIPE_KVCO_CALIB_CTRL_MAX_PLL_OFFSET 12 +#define HPIPE_KVCO_CALIB_CTRL_MAX_PLL_MASK \ + (0x1 << HPIPE_KVCO_CALIB_CTRL_MAX_PLL_OFFSET) + +#define HPIPE_CAL_REG1_REG 0xc +#define HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET 10 +#define HPIPE_CAL_REG_1_EXT_TXIMP_MASK \ + (0x1f << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET) +#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET 15 +#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK \ + (0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET) + +#define HPIPE_SQUELCH_FFE_SETTING_REG 0x018 + +#define HPIPE_DFE_REG0 0x01C +#define HPIPE_DFE_RES_FORCE_OFFSET 15 +#define HPIPE_DFE_RES_FORCE_MASK \ + (0x1 << HPIPE_DFE_RES_FORCE_OFFSET) + +#define HPIPE_DFE_F3_F5_REG 0x028 +#define HPIPE_DFE_F3_F5_DFE_EN_OFFSET 14 +#define HPIPE_DFE_F3_F5_DFE_EN_MASK \ + (0x1 << HPIPE_DFE_F3_F5_DFE_EN_OFFSET) +#define HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET 15 +#define HPIPE_DFE_F3_F5_DFE_CTRL_MASK \ + (0x1 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET) + +#define HPIPE_G1_SET_0_REG 0x034 +#define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET 1 +#define HPIPE_G1_SET_0_G1_TX_AMP_MASK \ + (0x1f << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET) +#define HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET 7 +#define HPIPE_G1_SET_0_G1_TX_EMPH1_MASK \ + (0xf << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET) + +#define HPIPE_G1_SET_1_REG 0x038 +#define HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET 0 +#define HPIPE_G1_SET_1_G1_RX_SELMUPI_MASK \ + (0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPI_OFFSET) +#define HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET 3 +#define HPIPE_G1_SET_1_G1_RX_SELMUPP_MASK \ + (0x7 << HPIPE_G1_SET_1_G1_RX_SELMUPP_OFFSET) +#define HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET 10 +#define HPIPE_G1_SET_1_G1_RX_DFE_EN_MASK \ + (0x1 << HPIPE_G1_SET_1_G1_RX_DFE_EN_OFFSET) + +#define HPIPE_G2_SETTINGS_1_REG 0x040 + +#define HPIPE_G3_SETTINGS_1_REG 0x048 +#define HPIPE_G3_RX_SELMUPI_OFFSET 0 +#define HPIPE_G3_RX_SELMUPI_MASK \ + (0x7 << HPIPE_G3_RX_SELMUPI_OFFSET) +#define HPIPE_G3_RX_SELMUPF_OFFSET 3 +#define HPIPE_G3_RX_SELMUPF_MASK \ + (0x7 << HPIPE_G3_RX_SELMUPF_OFFSET) +#define HPIPE_G3_SETTING_BIT_OFFSET 13 +#define HPIPE_G3_SETTING_BIT_MASK \ + (0x1 << HPIPE_G3_SETTING_BIT_OFFSET) + +#define HPIPE_LOOPBACK_REG 0x08c +#define HPIPE_LOOPBACK_SEL_OFFSET 1 +#define HPIPE_LOOPBACK_SEL_MASK \ + (0x7 << HPIPE_LOOPBACK_SEL_OFFSET) + +#define HPIPE_SYNC_PATTERN_REG 0x090 + +#define HPIPE_INTERFACE_REG 0x94 +#define HPIPE_INTERFACE_GEN_MAX_OFFSET 10 +#define HPIPE_INTERFACE_GEN_MAX_MASK \ + (0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET) +#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET 14 +#define HPIPE_INTERFACE_LINK_TRAIN_MASK \ + (0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET) + +#define HPIPE_ISOLATE_MODE_REG 0x98 +#define HPIPE_ISOLATE_MODE_GEN_RX_OFFSET 0 +#define HPIPE_ISOLATE_MODE_GEN_RX_MASK \ + (0xf << HPIPE_ISOLATE_MODE_GEN_RX_OFFSET) +#define HPIPE_ISOLATE_MODE_GEN_TX_OFFSET 4 +#define HPIPE_ISOLATE_MODE_GEN_TX_MASK \ + (0xf << HPIPE_ISOLATE_MODE_GEN_TX_OFFSET) + +#define HPIPE_G1_SET_2_REG 0xf4 +#define HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET 0 +#define HPIPE_G1_SET_2_G1_TX_EMPH0_MASK \ + (0xf << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET) +#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET 4 +#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK \ + (0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_MASK) + +#define HPIPE_VTHIMPCAL_CTRL_REG 0x104 + +#define HPIPE_PCIE_REG0 0x120 +#define HPIPE_PCIE_IDLE_SYNC_OFFSET 12 +#define HPIPE_PCIE_IDLE_SYNC_MASK \ + (0x1 << HPIPE_PCIE_IDLE_SYNC_OFFSET) +#define HPIPE_PCIE_SEL_BITS_OFFSET 13 +#define HPIPE_PCIE_SEL_BITS_MASK \ + (0x3 << HPIPE_PCIE_SEL_BITS_OFFSET) + +#define HPIPE_LANE_ALIGN_REG 0x124 +#define HPIPE_LANE_ALIGN_OFF_OFFSET 12 +#define HPIPE_LANE_ALIGN_OFF_MASK \ + (0x1 << HPIPE_LANE_ALIGN_OFF_OFFSET) + +#define HPIPE_MISC_REG 0x13C +#define HPIPE_MISC_CLK100M_125M_OFFSET 4 +#define HPIPE_MISC_CLK100M_125M_MASK \ + (0x1 << HPIPE_MISC_CLK100M_125M_OFFSET) +#define HPIPE_MISC_ICP_FORCE_OFFSET 5 +#define HPIPE_MISC_ICP_FORCE_MASK \ + (0x1 << HPIPE_MISC_ICP_FORCE_OFFSET) +#define HPIPE_MISC_TXDCLK_2X_OFFSET 6 +#define HPIPE_MISC_TXDCLK_2X_MASK \ + (0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET) +#define HPIPE_MISC_CLK500_EN_OFFSET 7 +#define HPIPE_MISC_CLK500_EN_MASK \ + (0x1 << HPIPE_MISC_CLK500_EN_OFFSET) +#define HPIPE_MISC_REFCLK_SEL_OFFSET 10 +#define HPIPE_MISC_REFCLK_SEL_MASK \ + (0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET) + +#define HPIPE_RX_CONTROL_1_REG 0x140 +#define HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET 11 +#define HPIPE_RX_CONTROL_1_RXCLK2X_SEL_MASK \ + (0x1 << HPIPE_RX_CONTROL_1_RXCLK2X_SEL_OFFSET) +#define HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET 12 +#define HPIPE_RX_CONTROL_1_CLK8T_EN_MASK \ + (0x1 << HPIPE_RX_CONTROL_1_CLK8T_EN_OFFSET) + +#define HPIPE_PWR_CTR_REG 0x148 +#define HPIPE_PWR_CTR_RST_DFE_OFFSET 0 +#define HPIPE_PWR_CTR_RST_DFE_MASK \ + (0x1 << HPIPE_PWR_CTR_RST_DFE_OFFSET) +#define HPIPE_PWR_CTR_SFT_RST_OFFSET 10 +#define HPIPE_PWR_CTR_SFT_RST_MASK \ + (0x1 << HPIPE_PWR_CTR_SFT_RST_OFFSET) + +#define HPIPE_PLLINTP_REG1 0x150 + +#define HPIPE_SAMPLER_N_PROC_CALIB_CTRL_REG 0x16C +#define HPIPE_SMAPLER_OFFSET 12 +#define HPIPE_SMAPLER_MASK \ + (0x1 << HPIPE_SMAPLER_OFFSET) + +#define HPIPE_TX_REG1_REG 0x174 +#define HPIPE_TX_REG1_TX_EMPH_RES_OFFSET 5 +#define HPIPE_TX_REG1_TX_EMPH_RES_MASK \ + (0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET) +#define HPIPE_TX_REG1_SLC_EN_OFFSET 10 +#define HPIPE_TX_REG1_SLC_EN_MASK \ + (0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET) + +#define HPIPE_PWR_CTR_DTL_REG 0x184 +#define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET 2 +#define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK \ + (0x1 << HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET) + +#define HPIPE_RX_REG3 0x188 + +#define HPIPE_TX_TRAIN_CTRL_0_REG 0x268 +#define HPIPE_TX_TRAIN_P2P_HOLD_OFFSET 15 +#define HPIPE_TX_TRAIN_P2P_HOLD_MASK \ + (0x1 << HPIPE_TX_TRAIN_P2P_HOLD_OFFSET) + +#define HPIPE_TX_TRAIN_CTRL_REG 0x26C +#define HPIPE_TX_TRAIN_CTRL_G1_OFFSET 0 +#define HPIPE_TX_TRAIN_CTRL_G1_MASK \ + (0x1 << HPIPE_TX_TRAIN_CTRL_G1_OFFSET) +#define HPIPE_TX_TRAIN_CTRL_GN1_OFFSET 1 +#define HPIPE_TX_TRAIN_CTRL_GN1_MASK \ + (0x1 << HPIPE_TX_TRAIN_CTRL_GN1_OFFSET) +#define HPIPE_TX_TRAIN_CTRL_G0_OFFSET 2 +#define HPIPE_TX_TRAIN_CTRL_G0_MASK \ + (0x1 << HPIPE_TX_TRAIN_CTRL_G0_OFFSET) + +#define HPIPE_TX_TRAIN_CTRL_4_REG 0x278 +#define HPIPE_TRX_TRAIN_TIMER_OFFSET 0 +#define HPIPE_TRX_TRAIN_TIMER_MASK \ + (0x3FF << HPIPE_TRX_TRAIN_TIMER_OFFSET) + +#define HPIPE_PCIE_REG1 0x288 +#define HPIPE_PCIE_REG3 0x290 + +#define HPIPE_TX_TRAIN_CTRL_5_REG 0x2A4 +#define HPIPE_TX_TRAIN_START_SQ_EN_OFFSET 11 +#define HPIPE_TX_TRAIN_START_SQ_EN_MASK \ + (0x1 << HPIPE_TX_TRAIN_START_SQ_EN_OFFSET) +#define HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET 12 +#define HPIPE_TX_TRAIN_START_FRM_DET_EN_MASK \ + (0x1 << HPIPE_TX_TRAIN_START_FRM_DET_EN_OFFSET) +#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET 13 +#define HPIPE_TX_TRAIN_START_FRM_LOCK_EN_MASK \ + (0x1 << HPIPE_TX_TRAIN_START_FRM_LOCK_EN_OFFSET) +#define HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET 14 +#define HPIPE_TX_TRAIN_WAIT_TIME_EN_MASK \ + (0x1 << HPIPE_TX_TRAIN_WAIT_TIME_EN_OFFSET) + +#define HPIPE_TX_TRAIN_REG 0x31C +#define HPIPE_TX_TRAIN_CHK_INIT_OFFSET 4 +#define HPIPE_TX_TRAIN_CHK_INIT_MASK \ + (0x1 << HPIPE_TX_TRAIN_CHK_INIT_OFFSET) +#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET 7 +#define HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_MASK \ + (0x1 << HPIPE_TX_TRAIN_COE_FM_PIN_PCIE3_OFFSET) + +#define HPIPE_TX_TRAIN_CTRL_11_REG 0x438 +#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET 6 +#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK \ + (0x1 << HPIPE_TX_STATUS_CHECK_MODE_OFFSET) +#define HPIPE_TX_NUM_OF_PRESET_OFFSET 10 +#define HPIPE_TX_NUM_OF_PRESET_MASK \ + (0x7 << HPIPE_TX_NUM_OF_PRESET_OFFSET) +#define HPIPE_TX_SWEEP_PRESET_EN_OFFSET 15 +#define HPIPE_TX_SWEEP_PRESET_EN_MASK \ + (0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET) + +#define HPIPE_G1_SETTINGS_3_REG 0x440 +#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET 9 +#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK \ + (0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET) + +#define HPIPE_G1_SETTINGS_4_REG 0x444 +#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET 8 +#define HPIPE_G1_SETTINGS_4_G1_DFE_RES_MASK \ + (0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET) + +#define HPIPE_G2_SETTINGS_3_REG 0x448 +#define HPIPE_G2_SETTINGS_4_REG 0x44C + +#define HPIPE_G3_SETTING_3_REG 0x450 +#define HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET 12 +#define HPIPE_G3_FFE_DEG_RES_LEVEL_MASK \ + (0x3 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET) +#define HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET 14 +#define HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK \ + (0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET) + +#define HPIPE_G3_SETTING_4_REG 0x454 +#define HPIPE_G3_DFE_RES_OFFSET 8 +#define HPIPE_G3_DFE_RES_MASK \ + (0x3 << HPIPE_G3_DFE_RES_OFFSET) + +#define HPIPE_DFE_CTRL_28_REG 0x49C +#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET 7 +#define HPIPE_DFE_CTRL_28_PIPE4_MASK \ + (0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET) + +#define HPIPE_G1_SETTING_5_REG 0x538 +#define HPIPE_G1_SETTING_5_G1_ICP_OFFSET 0 +#define HPIPE_G1_SETTING_5_G1_ICP_MASK \ + (0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET) + +#define HPIPE_LANE_CONFIG0_REG 0x600 +#define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET 0 +#define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK \ + (0x1 << HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET) + +#define HPIPE_LANE_CONFIG1_REG 0x604 +#define HPIPE_LANE_CONFIG1_MAX_PLL_OFFSET 9 +#define HPIPE_LANE_CONFIG1_MAX_PLL_MASK \ + (0x1 << HPIPE_LANE_CONFIG1_MAX_PLL_OFFSET) +#define HPIPE_LANE_CONFIG1_GEN2_PLL_OFFSET 10 +#define HPIPE_LANE_CONFIG1_GEN2_PLL_MASK \ + (0x1 << HPIPE_LANE_CONFIG1_GEN2_PLL_OFFSET) + +#define HPIPE_LANE_STATUS1_REG 0x60C +#define HPIPE_LANE_STATUS1_PCLK_EN_OFFSET 0 +#define HPIPE_LANE_STATUS1_PCLK_EN_MASK \ + (0x1 << HPIPE_LANE_STATUS1_PCLK_EN_OFFSET) + +#define HPIPE_LANE_CFG4_REG 0x620 +#define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET 0 +#define HPIPE_LANE_CFG4_DFE_CTRL_MASK \ + (0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET) +#define HPIPE_LANE_CFG4_DFE_OVER_OFFSET 6 +#define HPIPE_LANE_CFG4_DFE_OVER_MASK \ + (0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET) +#define HPIPE_LANE_CFG4_SSC_CTRL_OFFSET 7 +#define HPIPE_LANE_CFG4_SSC_CTRL_MASK \ + (0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET) + +#define HPIPE_LANE_EQU_CONFIG_0_REG 0x69C +#define HPIPE_CFG_PHY_RC_EP_OFFSET 12 +#define HPIPE_CFG_PHY_RC_EP_MASK \ + (0x1 << HPIPE_CFG_PHY_RC_EP_OFFSET) + +#define HPIPE_LANE_EQ_CFG1_REG 0x6a0 +#define HPIPE_CFG_UPDATE_POLARITY_OFFSET 12 +#define HPIPE_CFG_UPDATE_POLARITY_MASK \ + (0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET) + +#define HPIPE_RST_CLK_CTRL_REG 0x704 +#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET 0 +#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK \ + (0x1 << HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET) +#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET 2 +#define HPIPE_RST_CLK_CTRL_FIXED_PCLK_MASK \ + (0x1 << HPIPE_RST_CLK_CTRL_FIXED_PCLK_OFFSET) +#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET 3 +#define HPIPE_RST_CLK_CTRL_PIPE_WIDTH_MASK \ + (0x1 << HPIPE_RST_CLK_CTRL_PIPE_WIDTH_OFFSET) +#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET 9 +#define HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_MASK \ + (0x1 << HPIPE_RST_CLK_CTRL_CORE_FREQ_SEL_OFFSET) + +#define HPIPE_TST_MODE_CTRL_REG 0x708 +#define HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET 2 +#define HPIPE_TST_MODE_CTRL_MODE_MARGIN_MASK \ + (0x1 << HPIPE_TST_MODE_CTRL_MODE_MARGIN_OFFSET) + +#define HPIPE_CLK_SRC_LO_REG 0x70c +#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET 1 +#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_MASK \ + (0x1 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SEL_OFFSET) +#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET 2 +#define HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_MASK \ + (0x3 << HPIPE_CLK_SRC_LO_BUNDLE_PERIOD_SCALE_OFFSET) +#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET 5 +#define HPIPE_CLK_SRC_LO_PLL_RDY_DL_MASK \ + (0x7 << HPIPE_CLK_SRC_LO_PLL_RDY_DL_OFFSET) + +#define HPIPE_CLK_SRC_HI_REG 0x710 +#define HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET 0 +#define HPIPE_CLK_SRC_HI_LANE_STRT_MASK \ + (0x1 << HPIPE_CLK_SRC_HI_LANE_STRT_OFFSET) +#define HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET 1 +#define HPIPE_CLK_SRC_HI_LANE_BREAK_MASK \ + (0x1 << HPIPE_CLK_SRC_HI_LANE_BREAK_OFFSET) +#define HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET 2 +#define HPIPE_CLK_SRC_HI_LANE_MASTER_MASK \ + (0x1 << HPIPE_CLK_SRC_HI_LANE_MASTER_OFFSET) +#define HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET 7 +#define HPIPE_CLK_SRC_HI_MODE_PIPE_MASK \ + (0x1 << HPIPE_CLK_SRC_HI_MODE_PIPE_OFFSET) + +#define HPIPE_GLOBAL_MISC_CTRL 0x718 +#define HPIPE_GLOBAL_PM_CTRL 0x740 +#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET 0 +#define HPIPE_GLOBAL_PM_RXDLOZ_WAIT_MASK \ + (0xFF << HPIPE_GLOBAL_PM_RXDLOZ_WAIT_OFFSET) + +#endif /* _COMPHY_HPIPE_H_ */ + diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c new file mode 100644 index 0000000000..1dc7426b63 --- /dev/null +++ b/drivers/phy/marvell/comphy_mux.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> + +#include "comphy.h" +#include "comphy_hpipe.h" + +/* + * comphy_mux_check_config() + * description: this function passes over the COMPHY lanes and check if the type + * is valid for specific lane. If the type is not valid, + * the function update the struct and set the type of the lane as + * PHY_TYPE_UNCONNECTED + */ +static void comphy_mux_check_config(struct comphy_mux_data *mux_data, + struct comphy_map *comphy_map_data, int comphy_max_lanes) +{ + struct comphy_mux_options *mux_opt; + int lane, opt, valid; + + debug_enter(); + + for (lane = 0; lane < comphy_max_lanes; + lane++, comphy_map_data++, mux_data++) { + mux_opt = mux_data->mux_values; + for (opt = 0, valid = 0; opt < mux_data->max_lane_values; + opt++, mux_opt++) { + if (mux_opt->type == comphy_map_data->type) { + valid = 1; + break; + } + } + if (valid == 0) { + debug("lane number %d, had invalid type %d\n", + lane, comphy_map_data->type); + debug("set lane %d as type %d\n", lane, + PHY_TYPE_UNCONNECTED); + comphy_map_data->type = PHY_TYPE_UNCONNECTED; + } else { + debug("lane number %d, has type %d\n", + lane, comphy_map_data->type); + } + } + + debug_exit(); +} + +static u32 comphy_mux_get_mux_value(struct comphy_mux_data *mux_data, + u32 type, int lane) +{ + struct comphy_mux_options *mux_opt; + int opt; + u32 value = 0; + + debug_enter(); + + mux_opt = mux_data->mux_values; + for (opt = 0 ; opt < mux_data->max_lane_values; opt++, mux_opt++) { + if (mux_opt->type == type) { + value = mux_opt->mux_value; + break; + } + } + + debug_exit(); + + return value; +} + +static void comphy_mux_reg_write(struct comphy_mux_data *mux_data, + struct comphy_map *comphy_map_data, + int comphy_max_lanes, + void __iomem *selector_base, u32 bitcount) +{ + u32 lane, value, offset, mask; + + debug_enter(); + + for (lane = 0; lane < comphy_max_lanes; + lane++, comphy_map_data++, mux_data++) { + offset = lane * bitcount; + mask = (((1 << bitcount) - 1) << offset); + value = (comphy_mux_get_mux_value(mux_data, + comphy_map_data->type, + lane) << offset); + reg_set(selector_base, value, mask); + } + + debug_exit(); +} + +void comphy_mux_init(struct chip_serdes_phy_config *chip_cfg, + struct comphy_map *comphy_map_data, + void __iomem *selector_base) +{ + struct comphy_mux_data *mux_data; + u32 mux_bitcount; + u32 comphy_max_lanes; + + debug_enter(); + + comphy_max_lanes = chip_cfg->comphy_lanes_count; + mux_data = chip_cfg->mux_data; + mux_bitcount = chip_cfg->comphy_mux_bitcount; + + /* check if the configuration is valid */ + comphy_mux_check_config(mux_data, comphy_map_data, comphy_max_lanes); + /* Init COMPHY selectors */ + comphy_mux_reg_write(mux_data, comphy_map_data, comphy_max_lanes, + selector_base, mux_bitcount); + + debug_exit(); +} diff --git a/drivers/phy/marvell/sata.h b/drivers/phy/marvell/sata.h new file mode 100644 index 0000000000..be2ba54a0d --- /dev/null +++ b/drivers/phy/marvell/sata.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SATA_H_ +#define _SATA_H_ + +/* SATA3 Unit address */ +#define SATA3_VENDOR_ADDRESS 0xA0 +#define SATA3_VENDOR_ADDR_OFSSET 0 +#define SATA3_VENDOR_ADDR_MASK (0xFFFFFFFF << SATA3_VENDOR_ADDR_OFSSET) +#define SATA3_VENDOR_DATA 0xA4 + +#define SATA_CONTROL_REG 0x0 +#define SATA3_CTRL_SATA0_PD_OFFSET 6 +#define SATA3_CTRL_SATA0_PD_MASK (1 << SATA3_CTRL_SATA0_PD_OFFSET) +#define SATA3_CTRL_SATA1_PD_OFFSET 14 +#define SATA3_CTRL_SATA1_PD_MASK (1 << SATA3_CTRL_SATA1_PD_OFFSET) +#define SATA3_CTRL_SATA1_ENABLE_OFFSET 22 +#define SATA3_CTRL_SATA1_ENABLE_MASK (1 << SATA3_CTRL_SATA1_ENABLE_OFFSET) +#define SATA3_CTRL_SATA_SSU_OFFSET 23 +#define SATA3_CTRL_SATA_SSU_MASK (1 << SATA3_CTRL_SATA_SSU_OFFSET) + +#define SATA_MBUS_SIZE_SELECT_REG 0x4 +#define SATA_MBUS_REGRET_EN_OFFSET 7 +#define SATA_MBUS_REGRET_EN_MASK (0x1 << SATA_MBUS_REGRET_EN_OFFSET) + +#endif /* _SATA_H_ */ diff --git a/drivers/phy/marvell/utmi_phy.h b/drivers/phy/marvell/utmi_phy.h new file mode 100644 index 0000000000..01e53ba0fd --- /dev/null +++ b/drivers/phy/marvell/utmi_phy.h @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _UTMI_PHY_H_ +#define _UTMI_PHY_H_ + +#define UTMI_USB_CFG_DEVICE_EN_OFFSET 0 +#define UTMI_USB_CFG_DEVICE_EN_MASK \ + (0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET) +#define UTMI_USB_CFG_DEVICE_MUX_OFFSET 1 +#define UTMI_USB_CFG_DEVICE_MUX_MASK \ + (0x1 << UTMI_USB_CFG_DEVICE_MUX_OFFSET) +#define UTMI_USB_CFG_PLL_OFFSET 25 +#define UTMI_USB_CFG_PLL_MASK \ + (0x1 << UTMI_USB_CFG_PLL_OFFSET) + +#define UTMI_PHY_CFG_PU_OFFSET 5 +#define UTMI_PHY_CFG_PU_MASK \ + (0x1 << UTMI_PHY_CFG_PU_OFFSET) + +#define UTMI_PLL_CTRL_REG 0x0 +#define UTMI_PLL_CTRL_REFDIV_OFFSET 0 +#define UTMI_PLL_CTRL_REFDIV_MASK \ + (0x7f << UTMI_PLL_CTRL_REFDIV_OFFSET) +#define UTMI_PLL_CTRL_FBDIV_OFFSET 16 +#define UTMI_PLL_CTRL_FBDIV_MASK \ + (0x1FF << UTMI_PLL_CTRL_FBDIV_OFFSET) +#define UTMI_PLL_CTRL_SEL_LPFR_OFFSET 28 +#define UTMI_PLL_CTRL_SEL_LPFR_MASK \ + (0x3 << UTMI_PLL_CTRL_SEL_LPFR_OFFSET) +#define UTMI_PLL_CTRL_PLL_RDY_OFFSET 31 +#define UTMI_PLL_CTRL_PLL_RDY_MASK \ + (0x1 << UTMI_PLL_CTRL_PLL_RDY_OFFSET) + +#define UTMI_CALIB_CTRL_REG 0x8 +#define UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET 8 +#define UTMI_CALIB_CTRL_IMPCAL_VTH_MASK \ + (0x7 << UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET) +#define UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET 23 +#define UTMI_CALIB_CTRL_IMPCAL_DONE_MASK \ + (0x1 << UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET) +#define UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET 31 +#define UTMI_CALIB_CTRL_PLLCAL_DONE_MASK \ + (0x1 << UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET) + +#define UTMI_TX_CH_CTRL_REG 0xC +#define UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET 12 +#define UTMI_TX_CH_CTRL_DRV_EN_LS_MASK \ + (0xf << UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET) +#define UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET 16 +#define UTMI_TX_CH_CTRL_IMP_SEL_LS_MASK \ + (0xf << UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET) + +#define UTMI_RX_CH_CTRL0_REG 0x14 +#define UTMI_RX_CH_CTRL0_SQ_DET_OFFSET 15 +#define UTMI_RX_CH_CTRL0_SQ_DET_MASK \ + (0x1 << UTMI_RX_CH_CTRL0_SQ_DET_OFFSET) +#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET 28 +#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_MASK \ + (0x1 << UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET) + +#define UTMI_RX_CH_CTRL1_REG 0x18 +#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET 0 +#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_MASK \ + (0x3 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET) +#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET 3 +#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_MASK \ + (0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET) + +#define UTMI_CTRL_STATUS0_REG 0x24 +#define UTMI_CTRL_STATUS0_SUSPENDM_OFFSET 22 +#define UTMI_CTRL_STATUS0_SUSPENDM_MASK \ + (0x1 << UTMI_CTRL_STATUS0_SUSPENDM_OFFSET) +#define UTMI_CTRL_STATUS0_TEST_SEL_OFFSET 25 +#define UTMI_CTRL_STATUS0_TEST_SEL_MASK \ + (0x1 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET) + +#define UTMI_CHGDTC_CTRL_REG 0x38 +#define UTMI_CHGDTC_CTRL_VDAT_OFFSET 8 +#define UTMI_CHGDTC_CTRL_VDAT_MASK \ + (0x3 << UTMI_CHGDTC_CTRL_VDAT_OFFSET) +#define UTMI_CHGDTC_CTRL_VSRC_OFFSET 10 +#define UTMI_CHGDTC_CTRL_VSRC_MASK \ + (0x3 << UTMI_CHGDTC_CTRL_VSRC_OFFSET) + +#endif /* _UTMI_PHY_H_ */ + diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 5b84f2178b..4fcc0d95b4 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -20,6 +20,13 @@ config SANDBOX_RESET simply accepts requests to reset various HW modules without actually doing anything beyond a little error checking. +config TEGRA_CAR_RESET + bool "Enable Tegra CAR-based reset driver" + depends on TEGRA_CAR + help + Enable support for manipulating Tegra's on-SoC reset signals via + direct register access to the Tegra CAR (Clock And Reset controller). + config TEGRA186_RESET bool "Enable Tegra186 BPMP-based reset driver" depends on TEGRA186_BPMP diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index ff0e090775..5d4ea3d79d 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -5,4 +5,5 @@ obj-$(CONFIG_DM_RESET) += reset-uclass.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset.o obj-$(CONFIG_SANDBOX_MBOX) += sandbox-reset-test.o +obj-$(CONFIG_TEGRA_CAR_RESET) += tegra-car-reset.o obj-$(CONFIG_TEGRA186_RESET) += tegra186-reset.o diff --git a/drivers/reset/tegra-car-reset.c b/drivers/reset/tegra-car-reset.c new file mode 100644 index 0000000000..3147a50853 --- /dev/null +++ b/drivers/reset/tegra-car-reset.c @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <dm.h> +#include <reset-uclass.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/clk_rst.h> + +static int tegra_car_reset_request(struct reset_ctl *reset_ctl) +{ + debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, + reset_ctl->dev, reset_ctl->id); + + /* PERIPH_ID_COUNT varies per SoC */ + if (reset_ctl->id >= PERIPH_ID_COUNT) + return -EINVAL; + + return 0; +} + +static int tegra_car_reset_free(struct reset_ctl *reset_ctl) +{ + debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, + reset_ctl->dev, reset_ctl->id); + + return 0; +} + +static int tegra_car_reset_assert(struct reset_ctl *reset_ctl) +{ + debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, + reset_ctl->dev, reset_ctl->id); + + reset_set_enable(reset_ctl->id, 1); + + return 0; +} + +static int tegra_car_reset_deassert(struct reset_ctl *reset_ctl) +{ + debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, + reset_ctl->dev, reset_ctl->id); + + reset_set_enable(reset_ctl->id, 0); + + return 0; +} + +struct reset_ops tegra_car_reset_ops = { + .request = tegra_car_reset_request, + .free = tegra_car_reset_free, + .rst_assert = tegra_car_reset_assert, + .rst_deassert = tegra_car_reset_deassert, +}; + +static int tegra_car_reset_probe(struct udevice *dev) +{ + debug("%s(dev=%p)\n", __func__, dev); + + return 0; +} + +U_BOOT_DRIVER(tegra_car_reset) = { + .name = "tegra_car_reset", + .id = UCLASS_RESET, + .probe = tegra_car_reset_probe, + .ops = &tegra_car_reset_ops, +}; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ab5df70bfc..541cf2e512 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -147,6 +147,13 @@ config DEBUG_UART_ARM_DCC This port is available at least on ARMv6, ARMv7, ARMv8 and XScale architectures. +config DEBUG_MVEBU_A3700_UART + bool "Marvell Armada 3700" + help + Select this to enable a debug UART using the serial_mvebu driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver-model serial is running. + config DEBUG_UART_ZYNQ bool "Xilinx Zynq" help @@ -295,6 +302,13 @@ config FSL_LPUART Select this to enable a Low Power UART for Freescale VF610 and QorIQ Layerscape devices. +config MVEBU_A3700_UART + bool "UART support for Armada 3700" + default n + help + Choose this option to add support for UART driver on the Marvell + Armada 3700 SoC. The base address is configured via DT. + config PIC32_SERIAL bool "Support for Microchip PIC32 on-chip UART" depends on DM_SERIAL && MACH_PIC32 @@ -371,4 +385,5 @@ config MSM_SERIAL It should support all Qualcomm devices with UARTDM version 1.4, for example APQ8016 and MSM8916. Single baudrate is supported in current implementation (115200). + endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 6986d659ab..21b129206a 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o obj-$(CONFIG_STM32X7_SERIAL) += serial_stm32x7.o obj-$(CONFIG_BCM283X_MU_SERIAL) += serial_bcm283x_mu.o obj-$(CONFIG_MSM_SERIAL) += serial_msm.o +obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial_mvebu_a3700.c b/drivers/serial/serial_mvebu_a3700.c new file mode 100644 index 0000000000..192e79a3d3 --- /dev/null +++ b/drivers/serial/serial_mvebu_a3700.c @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <serial.h> +#include <asm/io.h> + +struct mvebu_platdata { + void __iomem *base; +}; + +/* + * Register offset + */ +#define UART_RX_REG 0x00 +#define UART_TX_REG 0x04 +#define UART_CTRL_REG 0x08 +#define UART_STATUS_REG 0x0c +#define UART_BAUD_REG 0x10 +#define UART_POSSR_REG 0x14 + +#define UART_STATUS_RX_RDY 0x10 +#define UART_STATUS_TXFIFO_FULL 0x800 + +#define UART_CTRL_RXFIFO_RESET 0x4000 +#define UART_CTRL_TXFIFO_RESET 0x8000 + +#define CONFIG_UART_BASE_CLOCK 25804800 + +static int mvebu_serial_putc(struct udevice *dev, const char ch) +{ + struct mvebu_platdata *plat = dev_get_platdata(dev); + void __iomem *base = plat->base; + + while (readl(base + UART_STATUS_REG) & UART_STATUS_TXFIFO_FULL) + ; + + writel(ch, base + UART_TX_REG); + + return 0; +} + +static int mvebu_serial_getc(struct udevice *dev) +{ + struct mvebu_platdata *plat = dev_get_platdata(dev); + void __iomem *base = plat->base; + + while (!(readl(base + UART_STATUS_REG) & UART_STATUS_RX_RDY)) + ; + + return readl(base + UART_RX_REG) & 0xff; +} + +static int mvebu_serial_pending(struct udevice *dev, bool input) +{ + struct mvebu_platdata *plat = dev_get_platdata(dev); + void __iomem *base = plat->base; + + if (readl(base + UART_STATUS_REG) & UART_STATUS_RX_RDY) + return 1; + + return 0; +} + +static int mvebu_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct mvebu_platdata *plat = dev_get_platdata(dev); + void __iomem *base = plat->base; + + /* + * Calculate divider + * baudrate = clock / 16 / divider + */ + writel(CONFIG_UART_BASE_CLOCK / baudrate / 16, base + UART_BAUD_REG); + + /* + * Set Programmable Oversampling Stack to 0, + * UART defaults to 16x scheme + */ + writel(0, base + UART_POSSR_REG); + + return 0; +} + +static int mvebu_serial_probe(struct udevice *dev) +{ + struct mvebu_platdata *plat = dev_get_platdata(dev); + void __iomem *base = plat->base; + + /* reset FIFOs */ + writel(UART_CTRL_RXFIFO_RESET | UART_CTRL_TXFIFO_RESET, + base + UART_CTRL_REG); + + /* No Parity, 1 Stop */ + writel(0, base + UART_CTRL_REG); + + return 0; +} + +static int mvebu_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct mvebu_platdata *plat = dev_get_platdata(dev); + + plat->base = dev_get_addr_ptr(dev); + + return 0; +} + +static const struct dm_serial_ops mvebu_serial_ops = { + .putc = mvebu_serial_putc, + .pending = mvebu_serial_pending, + .getc = mvebu_serial_getc, + .setbrg = mvebu_serial_setbrg, +}; + +static const struct udevice_id mvebu_serial_ids[] = { + { .compatible = "marvell,armada-3700-uart" }, + { } +}; + +U_BOOT_DRIVER(serial_mvebu) = { + .name = "serial_mvebu", + .id = UCLASS_SERIAL, + .of_match = mvebu_serial_ids, + .ofdata_to_platdata = mvebu_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct mvebu_platdata), + .probe = mvebu_serial_probe, + .ops = &mvebu_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +#ifdef CONFIG_DEBUG_MVEBU_A3700_UART + +#include <debug_uart.h> + +static inline void _debug_uart_init(void) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + + /* reset FIFOs */ + writel(UART_CTRL_RXFIFO_RESET | UART_CTRL_TXFIFO_RESET, + base + UART_CTRL_REG); + + /* No Parity, 1 Stop */ + writel(0, base + UART_CTRL_REG); + + /* + * Calculate divider + * baudrate = clock / 16 / divider + */ + writel(CONFIG_UART_BASE_CLOCK / 115200 / 16, base + UART_BAUD_REG); + + /* + * Set Programmable Oversampling Stack to 0, + * UART defaults to 16x scheme + */ + writel(0, base + UART_POSSR_REG); +} + +static inline void _debug_uart_putc(int ch) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + + while (readl(base + UART_STATUS_REG) & UART_STATUS_TXFIFO_FULL) + ; + + writel(ch, base + UART_TX_REG); +} + +DEBUG_UART_FUNCS +#endif diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5da66a6de0..8724f87c49 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -68,6 +68,13 @@ config ICH_SPI access the SPI NOR flash on platforms embedding this Intel ICH IP core. +config MVEBU_A3700_SPI + bool "Marvell Armada 3700 SPI driver" + help + Enable the Marvell Armada 3700 SPI driver. This driver can be + used to access the SPI NOR flash on platforms embedding this + Marvell IP core. + config PIC32_SPI bool "Microchip PIC32 SPI driver" depends on MACH_PIC32 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index b1d9e2075e..247c5f6558 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o obj-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o +obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o obj-$(CONFIG_MXC_SPI) += mxc_spi.o obj-$(CONFIG_MXS_SPI) += mxs_spi.o obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o diff --git a/drivers/spi/mvebu_a3700_spi.c b/drivers/spi/mvebu_a3700_spi.c new file mode 100644 index 0000000000..7c58c3661f --- /dev/null +++ b/drivers/spi/mvebu_a3700_spi.c @@ -0,0 +1,295 @@ +/* + * Copyright (C) 2015 Marvell International Ltd. + * + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <malloc.h> +#include <spi.h> +#include <wait_bit.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define MVEBU_SPI_A3700_XFER_RDY BIT(1) +#define MVEBU_SPI_A3700_FIFO_FLUSH BIT(9) +#define MVEBU_SPI_A3700_BYTE_LEN BIT(5) +#define MVEBU_SPI_A3700_CLK_PHA BIT(6) +#define MVEBU_SPI_A3700_CLK_POL BIT(7) +#define MVEBU_SPI_A3700_FIFO_EN BIT(17) +#define MVEBU_SPI_A3700_SPI_EN_0 BIT(16) +#define MVEBU_SPI_A3700_CLK_PRESCALE_BIT 0 +#define MVEBU_SPI_A3700_CLK_PRESCALE_MASK \ + (0x1f << MVEBU_SPI_A3700_CLK_PRESCALE_BIT) + +/* SPI registers */ +struct spi_reg { + u32 ctrl; /* 0x10600 */ + u32 cfg; /* 0x10604 */ + u32 dout; /* 0x10608 */ + u32 din; /* 0x1060c */ +}; + +struct mvebu_spi_platdata { + struct spi_reg *spireg; + unsigned int frequency; + unsigned int clock; +}; + +static void spi_cs_activate(struct spi_reg *reg, int cs) +{ + setbits_le32(®->ctrl, MVEBU_SPI_A3700_SPI_EN_0 << cs); +} + +static void spi_cs_deactivate(struct spi_reg *reg, int cs) +{ + clrbits_le32(®->ctrl, MVEBU_SPI_A3700_SPI_EN_0 << cs); +} + +/** + * spi_legacy_shift_byte() - triggers the real SPI transfer + * @bytelen: Indicate how many bytes to transfer. + * @dout: Buffer address of what to send. + * @din: Buffer address of where to receive. + * + * This function triggers the real SPI transfer in legacy mode. It + * will shift out char buffer from @dout, and shift in char buffer to + * @din, if necessary. + * + * This function assumes that only one byte is shifted at one time. + * However, it is not its responisbility to set the transfer type to + * one-byte. Also, it does not guarantee that it will work if transfer + * type becomes two-byte. See spi_set_legacy() for details. + * + * In legacy mode, simply write to the SPI_DOUT register will trigger + * the transfer. + * + * If @dout == NULL, which means no actual data needs to be sent out, + * then the function will shift out 0x00 in order to shift in data. + * The XFER_RDY flag is checked every time before accessing SPI_DOUT + * and SPI_DIN register. + * + * The number of transfers to be triggerred is decided by @bytelen. + * + * Return: 0 - cool + * -ETIMEDOUT - XFER_RDY flag timeout + */ +static int spi_legacy_shift_byte(struct spi_reg *reg, unsigned int bytelen, + const void *dout, void *din) +{ + const u8 *dout_8; + u8 *din_8; + int ret; + + /* Use 0x00 as dummy dout */ + const u8 dummy_dout = 0x0; + u32 pending_dout = 0x0; + + /* dout_8: pointer of current dout */ + dout_8 = dout; + /* din_8: pointer of current din */ + din_8 = din; + + while (bytelen) { + ret = wait_for_bit(__func__, ®->ctrl, + MVEBU_SPI_A3700_XFER_RDY, true, 100, false); + if (ret) + return ret; + + if (dout) + pending_dout = (u32)*dout_8; + else + pending_dout = (u32)dummy_dout; + + /* Trigger the xfer */ + writel(pending_dout, ®->dout); + + if (din) { + ret = wait_for_bit(__func__, ®->ctrl, + MVEBU_SPI_A3700_XFER_RDY, + true, 100, false); + if (ret) + return ret; + + /* Read what is transferred in */ + *din_8 = (u8)readl(®->din); + } + + /* Don't increment the current pointer if NULL */ + if (dout) + dout_8++; + if (din) + din_8++; + + bytelen--; + } + + return 0; +} + +static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev->parent; + struct mvebu_spi_platdata *plat = dev_get_platdata(bus); + struct spi_reg *reg = plat->spireg; + unsigned int bytelen; + int ret; + + bytelen = bitlen / 8; + + if (dout && din) + debug("This is a duplex transfer.\n"); + + /* Activate CS */ + if (flags & SPI_XFER_BEGIN) { + debug("SPI: activate cs.\n"); + spi_cs_activate(reg, spi_chip_select(dev)); + } + + /* Send and/or receive */ + if (dout || din) { + ret = spi_legacy_shift_byte(reg, bytelen, dout, din); + if (ret) + return ret; + } + + /* Deactivate CS */ + if (flags & SPI_XFER_END) { + ret = wait_for_bit(__func__, ®->ctrl, + MVEBU_SPI_A3700_XFER_RDY, true, 100, false); + if (ret) + return ret; + + debug("SPI: deactivate cs.\n"); + spi_cs_deactivate(reg, spi_chip_select(dev)); + } + + return 0; +} + +static int mvebu_spi_set_speed(struct udevice *bus, uint hz) +{ + struct mvebu_spi_platdata *plat = dev_get_platdata(bus); + struct spi_reg *reg = plat->spireg; + u32 data; + + data = readl(®->cfg); + + /* Set Prescaler */ + data &= ~MVEBU_SPI_A3700_CLK_PRESCALE_MASK; + + /* Calculate Prescaler = (spi_input_freq / spi_max_freq) */ + if (hz > plat->frequency) + hz = plat->frequency; + data |= plat->clock / hz; + + writel(data, ®->cfg); + + return 0; +} + +static int mvebu_spi_set_mode(struct udevice *bus, uint mode) +{ + struct mvebu_spi_platdata *plat = dev_get_platdata(bus); + struct spi_reg *reg = plat->spireg; + + /* + * Set SPI polarity + * 0: Serial interface clock is low when inactive + * 1: Serial interface clock is high when inactive + */ + if (mode & SPI_CPOL) + setbits_le32(®->cfg, MVEBU_SPI_A3700_CLK_POL); + else + clrbits_le32(®->cfg, MVEBU_SPI_A3700_CLK_POL); + if (mode & SPI_CPHA) + setbits_le32(®->cfg, MVEBU_SPI_A3700_CLK_PHA); + else + clrbits_le32(®->cfg, MVEBU_SPI_A3700_CLK_PHA); + + return 0; +} + +static int mvebu_spi_probe(struct udevice *bus) +{ + struct mvebu_spi_platdata *plat = dev_get_platdata(bus); + struct spi_reg *reg = plat->spireg; + u32 data; + int ret; + + /* + * Settings SPI controller to be working in legacy mode, which + * means use only DO pin (I/O 1) for Data Out, and DI pin (I/O 0) + * for Data In. + */ + + /* Flush read/write FIFO */ + data = readl(®->cfg); + writel(data | MVEBU_SPI_A3700_FIFO_FLUSH, ®->cfg); + ret = wait_for_bit(__func__, ®->cfg, MVEBU_SPI_A3700_FIFO_FLUSH, + false, 1000, false); + if (ret) + return ret; + + /* Disable FIFO mode */ + data &= ~MVEBU_SPI_A3700_FIFO_EN; + + /* Always shift 1 byte at a time */ + data &= ~MVEBU_SPI_A3700_BYTE_LEN; + + writel(data, ®->cfg); + + return 0; +} + +static int mvebu_spi_ofdata_to_platdata(struct udevice *bus) +{ + struct mvebu_spi_platdata *plat = dev_get_platdata(bus); + + plat->spireg = (struct spi_reg *)dev_get_addr(bus); + + /* + * FIXME + * Right now, mvebu does not have a clock infrastructure in U-Boot + * which should be used to query the input clock to the SPI + * controller. Once this clock driver is integrated into U-Boot + * it should be used to read the input clock and the DT property + * can be removed. + */ + plat->clock = fdtdec_get_int(gd->fdt_blob, bus->of_offset, + "clock-frequency", 160000); + plat->frequency = fdtdec_get_int(gd->fdt_blob, bus->of_offset, + "spi-max-frequency", 40000); + + return 0; +} + +static const struct dm_spi_ops mvebu_spi_ops = { + .xfer = mvebu_spi_xfer, + .set_speed = mvebu_spi_set_speed, + .set_mode = mvebu_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id mvebu_spi_ids[] = { + { .compatible = "marvell,armada-3700-spi" }, + { } +}; + +U_BOOT_DRIVER(mvebu_spi) = { + .name = "mvebu_spi", + .id = UCLASS_SPI, + .of_match = mvebu_spi_ids, + .ops = &mvebu_spi_ops, + .ofdata_to_platdata = mvebu_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct mvebu_spi_platdata), + .probe = mvebu_spi_probe, +}; diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index c915c79729..acc9964e23 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -19,7 +19,9 @@ obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o +endif obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o obj-$(CONFIG_USB_FUNCTION_FASTBOOT) += f_fastboot.o endif diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 61e13d76e6..b9c5fbe381 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -21,6 +21,15 @@ config USB_XHCI_DWC3 Say Y or if your system has a Dual Role SuperSpeed USB controller based on the DesignWare USB3 IP Core. +config USB_XHCI_MVEBU + bool "MVEBU USB 3.0 support" + default y + depends on ARCH_MVEBU + help + Choose this option to add support for USB 3.0 driver on mvebu + SoCs, which includes Armada8K, Armada3700 and other Armada + family SoCs. + config USB_XHCI_ROCKCHIP bool "Support for Rockchip on-chip xHCI USB controller" depends on ARCH_ROCKCHIP diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index de253284fb..58c0cf54c2 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o +obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c index 253fcb3c96..464247035e 100644 --- a/drivers/usb/host/ehci-marvell.c +++ b/drivers/usb/host/ehci-marvell.c @@ -26,6 +26,16 @@ DECLARE_GLOBAL_DATA_PTR; #define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) #define USB_TARGET_DRAM 0x0 +#define USB2_SBUSCFG_OFF 0x90 + +#define USB_SBUSCFG_BAWR_OFF 0x6 +#define USB_SBUSCFG_BARD_OFF 0x3 +#define USB_SBUSCFG_AHBBRST_OFF 0x0 + +#define USB_SBUSCFG_BAWR_ALIGN_64B 0x4 +#define USB_SBUSCFG_BARD_ALIGN_64B 0x4 +#define USB_SBUSCFG_AHBBRST_INCR16 0x7 + /* * USB 2.0 Bridge Address Decoding registers setup */ @@ -41,7 +51,7 @@ struct ehci_mvebu_priv { * to the common mvebu archticture including the mbus setup, this * will be the only function needed to configure the access windows */ -static void usb_brg_adrdec_setup(u32 base) +static void usb_brg_adrdec_setup(void *base) { const struct mbus_dram_target_info *dram; int i; @@ -66,6 +76,29 @@ static void usb_brg_adrdec_setup(u32 base) } } +static void marvell_ehci_powerup_fixup(struct ehci_ctrl *ctrl, + uint32_t *status_reg, uint32_t *reg) +{ + struct ehci_mvebu_priv *priv = ctrl->priv; + + /* + * Set default value for reg SBUSCFG, which is Control for the AMBA + * system bus interface: + * BAWR = BARD = 4 : Align rd/wr bursts packets larger than 64 bytes + * AHBBRST = 7 : Align AHB burst for packets larger than 64 bytes + */ + writel((USB_SBUSCFG_BAWR_ALIGN_64B << USB_SBUSCFG_BAWR_OFF) | + (USB_SBUSCFG_BARD_ALIGN_64B << USB_SBUSCFG_BARD_OFF) | + (USB_SBUSCFG_AHBBRST_INCR16 << USB_SBUSCFG_AHBBRST_OFF), + priv->hcd_base + USB2_SBUSCFG_OFF); + + mdelay(50); +} + +static struct ehci_ops marvell_ehci_ops = { + .powerup_fixup = NULL, +}; + static int ehci_mvebu_probe(struct udevice *dev) { struct ehci_mvebu_priv *priv = dev_get_priv(dev); @@ -81,21 +114,33 @@ static int ehci_mvebu_probe(struct udevice *dev) return -ENXIO; } - usb_brg_adrdec_setup(priv->hcd_base); + /* + * For SoCs without hlock like Armada3700 we need to program the sbuscfg + * reg to guarantee AHB master's burst will not overrun or underrun + * the FIFO. Otherwise all USB2 write option will fail. + * Also, the address decoder doesn't need to get setup with this + * SoC, so don't call usb_brg_adrdec_setup(). + */ + if (of_device_is_compatible(dev, "marvell,armada3700-ehci")) + marvell_ehci_ops.powerup_fixup = marvell_ehci_powerup_fixup; + else + usb_brg_adrdec_setup((void *)priv->hcd_base); hccr = (struct ehci_hccr *)(priv->hcd_base + 0x100); hcor = (struct ehci_hcor *) - ((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + ((uintptr_t)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - debug("ehci-marvell: init hccr %x and hcor %x hc_length %d\n", - (u32)hccr, (u32)hcor, - (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + debug("ehci-marvell: init hccr %lx and hcor %lx hc_length %ld\n", + (uintptr_t)hccr, (uintptr_t)hcor, + (uintptr_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); + return ehci_register(dev, hccr, hcor, &marvell_ehci_ops, 0, + USB_INIT_HOST); } static const struct udevice_id ehci_usb_ids[] = { { .compatible = "marvell,orion-ehci", }, + { .compatible = "marvell,armada3700-ehci", }, { } }; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index eb54df471d..e3620da15f 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -600,9 +600,18 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, /* reset ULPI phy */ if (dm_gpio_is_valid(&config->phy_reset_gpio)) { - dm_gpio_set_value(&config->phy_reset_gpio, 0); - mdelay(5); + /* + * This GPIO is typically active-low, and marked as such in + * device tree. dm_gpio_set_value() takes this into account + * and inverts the value we pass here if required. In other + * words, this first call logically asserts the reset signal, + * which typically results in driving the physical GPIO low, + * and the second call logically de-asserts the reset signal, + * which typically results in driver the GPIO high. + */ dm_gpio_set_value(&config->phy_reset_gpio, 1); + mdelay(5); + dm_gpio_set_value(&config->phy_reset_gpio, 0); } /* Reset the usb controller */ diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c new file mode 100644 index 0000000000..23c241a7c7 --- /dev/null +++ b/drivers/usb/host/xhci-mvebu.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2015 Marvell International Ltd. + * + * MVEBU USB HOST xHCI Controller + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <usb.h> +#include <asm/gpio.h> + +#include "xhci.h" + +DECLARE_GLOBAL_DATA_PTR; + +struct mvebu_xhci_platdata { + fdt_addr_t hcd_base; +}; + +/** + * Contains pointers to register base addresses + * for the usb controller. + */ +struct mvebu_xhci { + struct xhci_ctrl ctrl; /* Needs to come first in this struct! */ + struct usb_platdata usb_plat; + struct xhci_hccr *hcd; +}; + +/* + * Dummy implementation that can be overwritten by a board + * specific function + */ +__weak int board_xhci_enable(void) +{ + return 0; +} + +static int xhci_usb_probe(struct udevice *dev) +{ + struct mvebu_xhci_platdata *plat = dev_get_platdata(dev); + struct mvebu_xhci *ctx = dev_get_priv(dev); + struct xhci_hcor *hcor; + int len; + + ctx->hcd = (struct xhci_hccr *)plat->hcd_base; + len = HC_LENGTH(xhci_readl(&ctx->hcd->cr_capbase)); + hcor = (struct xhci_hcor *)((uintptr_t)ctx->hcd + len); + + /* Enable USB xHCI (VBUS, reset etc) in board specific code */ + board_xhci_enable(); + + return xhci_register(dev, ctx->hcd, hcor); +} + +static int xhci_usb_remove(struct udevice *dev) +{ + return xhci_deregister(dev); +} + +static int xhci_usb_ofdata_to_platdata(struct udevice *dev) +{ + struct mvebu_xhci_platdata *plat = dev_get_platdata(dev); + + /* + * Get the base address for XHCI controller from the device node + */ + plat->hcd_base = dev_get_addr(dev); + if (plat->hcd_base == FDT_ADDR_T_NONE) { + debug("Can't get the XHCI register base address\n"); + return -ENXIO; + } + + return 0; +} + +static const struct udevice_id xhci_usb_ids[] = { + { .compatible = "marvell,armada3700-xhci" }, + { .compatible = "marvell,armada-8k-xhci" }, + { } +}; + +U_BOOT_DRIVER(usb_xhci) = { + .name = "xhci_mvebu", + .id = UCLASS_USB, + .of_match = xhci_usb_ids, + .ofdata_to_platdata = xhci_usb_ofdata_to_platdata, + .probe = xhci_usb_probe, + .remove = xhci_usb_remove, + .ops = &xhci_usb_ops, + .platdata_auto_alloc_size = sizeof(struct mvebu_xhci_platdata), + .priv_auto_alloc_size = sizeof(struct mvebu_xhci), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 6b5ed484b3..2959befeb4 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -332,8 +332,6 @@ /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -348,7 +346,6 @@ "u-boot.img fat 0 1;" \ "uEnv.txt fat 0 1\0" #ifdef CONFIG_NAND -#define CONFIG_DFU_NAND #define DFU_ALT_INFO_NAND \ "dfu_alt_info_nand=" \ "SPL part 0 1;" \ @@ -362,7 +359,6 @@ #else #define DFU_ALT_INFO_NAND "" #endif -#define CONFIG_DFU_RAM #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0xD80000;" \ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 19ccbcbbd9..20f207c3f3 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -122,10 +122,7 @@ #ifndef CONFIG_SPL_BUILD /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM -#define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -141,14 +138,12 @@ "MLO raw 0x100 0x100 mmcpart 0;" \ "u-boot.img raw 0x300 0x1000 mmcpart 0\0" -#define CONFIG_DFU_RAM #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0x4000000;" \ "fdt ram 0x80f80000 0x80000;" \ "ramdisk ram 0x81000000 0x4000000\0" -#define CONFIG_DFU_SF #define DFU_ALT_INFO_QSPI \ "dfu_alt_info_qspi=" \ "u-boot.bin raw 0x0 0x080000;" \ diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 82d82f49f2..0eb0c0308f 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -465,8 +465,6 @@ DEFAULT_LINUX_BOOT_ENV \ /* USB Device Firmware Update support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define DFU_ALT_INFO_MMC \ "dfu_alt_info_mmc=" \ "boot part 0 1;" \ @@ -481,7 +479,6 @@ DEFAULT_LINUX_BOOT_ENV \ "u-boot.img fat 0 1;" \ "uEnv.txt fat 0 1\0" #ifdef CONFIG_NAND -#define CONFIG_DFU_NAND #define DFU_ALT_INFO_NAND \ "dfu_alt_info_nand=" \ "SPL part 0 1;" \ @@ -495,7 +492,6 @@ DEFAULT_LINUX_BOOT_ENV \ #else #define DFU_ALT_INFO_NAND "" #endif -#define CONFIG_DFU_RAM #define DFU_ALT_INFO_RAM \ "dfu_alt_info_ram=" \ "kernel ram 0x80200000 0xD80000;" \ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 36a29f1b47..5ee83ded9e 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -81,11 +81,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC -#define CONFIG_DFU_SF - #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_ANDROID_BOOT_IMAGE diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index ba1adea364..e911303788 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -220,8 +220,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 0ee08e61d8..597eb2c430 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -216,9 +216,6 @@ #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 /* USB DFU */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) /* USB Storage */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 6521ddeb16..5e6094127e 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -112,8 +112,6 @@ #define CONFIG_MTD_PARTITIONS /* DFU class support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 194804c293..cecb00f252 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -205,14 +205,6 @@ #define CONFIG_OMAP_USB_PHY #define CONFIG_OMAP_USB2PHY2_HOST -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM - -#define CONFIG_DFU_MMC -#define CONFIG_DFU_RAM -#define CONFIG_DFU_SF - /* SATA */ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SCSI diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index fdbaf027ac..06fde3853c 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -29,8 +29,6 @@ #define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/mvebu_db-88f3720.h b/include/configs/mvebu_db-88f3720.h new file mode 100644 index 0000000000..e785f241f8 --- /dev/null +++ b/include/configs/mvebu_db-88f3720.h @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_MVEBU_DB_88F3720_H +#define _CONFIG_MVEBU_DB_88F3720_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_ARCH_EARLY_INIT_R + +#define CONFIG_SYS_TEXT_BASE 0x00000000 + +/* additions for new ARM relocation support */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* auto boot */ +#define CONFIG_PREBOOT + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400, 460800, 921600 } + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ + +/* + * Other required minimal configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ +#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* End of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) + +/* + * I2C + */ +#define CONFIG_I2C_MV +#define CONFIG_SYS_I2C_SLAVE 0x0 + +/* + * SPI Flash configuration + */ +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE + +/* Environment in SPI NOR flash */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ + +/* + * Ethernet Driver configuration + */ +#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */ +#define CONFIG_ARP_TIMEOUT 200 +#define CONFIG_NET_RETRY_COUNT 50 + +/* USB 2.0 */ +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 + +/* USB 3.0 */ +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 + +#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ + CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) + +/* USB ethernet */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_RTL8152 +#define CONFIG_USB_ETHER_SMSC95XX + +/* + * SATA/SCSI/AHCI configuration + */ +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#define CONFIG_SUPPORT_VFAT + +/* DISK Partition support */ +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + +#endif /* _CONFIG_MVEBU_DB_88F3720_H */ diff --git a/include/configs/mvebu_db-88f7040.h b/include/configs/mvebu_db-88f7040.h new file mode 100644 index 0000000000..cfb0191e8d --- /dev/null +++ b/include/configs/mvebu_db-88f7040.h @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_MVEBU_DB_88F7040_H +#define _CONFIG_MVEBU_DB_88F7040_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_ARCH_EARLY_INIT_R +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_TEXT_BASE 0x00000000 + +/* additions for new ARM relocation support */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_NR_DRAM_BANKS 1 + +/* auto boot */ +#define CONFIG_PREBOOT + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200, 230400, 460800, 921600 } + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ + +/* + * Other required minimal configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ +#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* End of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) + +/* + * SPI Flash configuration + */ +#define CONFIG_KIRKWOOD_SPI +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE + +/* Environment in SPI NOR flash */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ + +/* USB 2.0 */ +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 + +/* USB 3.0 */ +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3 + +#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \ + CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS) + +/* USB ethernet */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 +#define CONFIG_USB_ETHER_RTL8152 +#define CONFIG_USB_ETHER_SMSC95XX + +/* + * SATA/SCSI/AHCI configuration + */ +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_SYS_64BIT_LBA + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#define CONFIG_SUPPORT_VFAT + +/* DISK Partition support */ +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +#define CONFIG_CMD_PART +#define CONFIG_PARTITION_UUIDS + +#endif /* _CONFIG_MVEBU_DB_88F7040_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 1ee880d9df..7423cffaef 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -238,11 +238,6 @@ #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 - -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC -#define CONFIG_DFU_SF #endif #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index f6a636d803..83f3d9548a 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -252,11 +252,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC -#define CONFIG_DFU_RAM - #define CONFIG_VIDEO #ifdef CONFIG_VIDEO #define CONFIG_CFB_CONSOLE diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 0b57949f37..40b48f70ab 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -45,8 +45,6 @@ #define CONFIG_USB_EHCI_EXYNOS /* DFU */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index c126990c0a..22614fb9c3 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -96,12 +96,6 @@ #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 -/* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM - -#define CONFIG_DFU_MMC - /* Enabled commands */ /* USB Networking options */ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 1c46ec33a2..ed3b64fd71 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -58,8 +58,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_VBUS_DRAW 2 -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 61c5663c40..72286ddb29 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -65,8 +65,6 @@ #define CONFIG_CMD_GPT /* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index d81e1a575d..c53bd66890 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -216,8 +216,6 @@ #define CONFIG_USBD_HS /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 1ea41a22cb..fd557a96a9 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -166,8 +166,6 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 084874d2fd..e1faf38649 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -241,10 +241,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_FUNCTION_DFU -#ifdef CONFIG_DM_MMC -#define CONFIG_DFU_MMC -#endif #define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 8d90c914ba..c5555e6990 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -215,10 +215,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_LATE_INIT -/* Enable DFU to SF and RAM */ -#define CONFIG_DFU_RAM -#define CONFIG_DFU_SF - /* Support changing the prompt string */ #define CONFIG_CMDLINE_PS_SUPPORT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index deb2e8d07d..d261fb3a8c 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -332,15 +332,10 @@ extern int soft_i2c_gpio_scl; #endif #ifdef CONFIG_USB_MUSB_GADGET -#define CONFIG_USB_FUNCTION_DFU #define CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_USB_FUNCTION_MASS_STORAGE #endif -#ifdef CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM -#endif - #ifdef CONFIG_USB_FUNCTION_FASTBOOT #define CONFIG_CMD_FASTBOOT #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR diff --git a/include/configs/taurus.h b/include/configs/taurus.h index af0b841e2e..1be4341e2e 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -128,8 +128,6 @@ #define CONFIG_USB_GADGET_AT91 /* DFU class support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_NAND #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000 #endif diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index 3e3eeea066..00f854eb71 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -14,16 +14,8 @@ /* USB mass storage protocol */ #define CONFIG_USB_FUNCTION_MASS_STORAGE /* DFU protocol */ -#define CONFIG_USB_FUNCTION_DFU #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define CONFIG_SYS_DFU_MAX_FILE_SIZE SZ_32M -#ifdef CONFIG_MMC -#define CONFIG_DFU_MMC -#endif -#ifdef CONFIG_SPI_FLASH -#define CONFIG_DFU_SF -#endif -#define CONFIG_DFU_RAM #endif #endif /* _TEGRA_COMMON_USB_GADGET_H_ */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 29614e0f9e..1385d316d3 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -76,11 +76,12 @@ * Increasing the size of the IO buffer as default nfsargs size is more * than 256 and so it is not possible to edit it */ -#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE (1024 * 2) /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ + /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index d8a8c4a875..f039df51af 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -146,11 +146,7 @@ * we are on so we do not need to rely on the command prompt. We set a * console baudrate of 115200 and use the default baud rate table. */ -#ifdef CONFIG_DFU_MMC -#define CONFIG_SYS_MALLOC_LEN ((16 << 20) + CONFIG_SYS_DFU_DATA_BUF_SIZE) -#else -#define CONFIG_SYS_MALLOC_LEN (16 << 20) -#endif +#define CONFIG_SYS_MALLOC_LEN SZ_32M #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_BAUDRATE 115200 #define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ @@ -230,7 +226,7 @@ #ifndef CONFIG_SYS_SPL_MALLOC_START #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_8M #endif #ifndef CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ diff --git a/include/configs/warp.h b/include/configs/warp.h index 66651841f6..b35b795322 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -75,8 +75,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 89a6fccb1e..9642dd9c4c 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -144,8 +144,6 @@ #define CONFIG_USB_FUNCTION_MASS_STORAGE /* USB Device Firmware Update support */ -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_MMC #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 5ed8beb9c2..adc42cff12 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -116,8 +116,6 @@ #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_USB_FUNCTION_DFU -#define CONFIG_DFU_RAM #define CONFIG_USB_CABLE_CHECK #define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 260df2f0b4..f1c9bedb1c 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -90,8 +90,6 @@ # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 # define DFU_DEFAULT_POLL_TIMEOUT 300 -# define CONFIG_USB_FUNCTION_DFU -# define CONFIG_DFU_RAM # define CONFIG_USB_CABLE_CHECK # define CONFIG_CMD_THOR_DOWNLOAD # define CONFIG_THOR_RESET_OFF @@ -106,7 +104,6 @@ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" # if defined(CONFIG_ZYNQ_SDHCI) -# define CONFIG_DFU_MMC # define DFU_ALT_INFO_MMC \ "dfu_mmc_info=" \ "set dfu_alt_info " \ diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 6d0d8d8ef3..534c03f8ad 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -49,7 +49,7 @@ #define TEGRA114_CLK_I2S0 30 /* 31 */ -/* 32 */ +#define TEGRA114_CLK_MC 32 /* 33 */ #define TEGRA114_CLK_APBDMA 34 /* 35 */ @@ -337,6 +337,7 @@ #define TEGRA114_CLK_CLK_OUT_3_MUX 308 #define TEGRA114_CLK_DSIA_MUX 309 #define TEGRA114_CLK_DSIB_MUX 310 -#define TEGRA114_CLK_CLK_MAX 311 +#define TEGRA114_CLK_XUSB_SS_DIV2 311 +#define TEGRA114_CLK_CLK_MAX 312 #endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h index a1ae9a8fdd..04500b243a 100644 --- a/include/dt-bindings/clock/tegra20-car.h +++ b/include/dt-bindings/clock/tegra20-car.h @@ -49,7 +49,7 @@ /* 30 */ #define TEGRA20_CLK_CACHE2 31 -#define TEGRA20_CLK_MEM 32 +#define TEGRA20_CLK_MC 32 #define TEGRA20_CLK_AHBDMA 33 #define TEGRA20_CLK_APBDMA 34 /* 35 */ @@ -92,7 +92,7 @@ #define TEGRA20_CLK_OWR 71 #define TEGRA20_CLK_AFI 72 #define TEGRA20_CLK_CSITE 73 -#define TEGRA20_CLK_PCIE_XCLK 74 +/* 74 */ #define TEGRA20_CLK_AVPUCQ 75 #define TEGRA20_CLK_LA 76 /* 77 */ diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h index d134741eb5..bd3530e56d 100644 --- a/include/dt-bindings/clock/tegra210-car.h +++ b/include/dt-bindings/clock/tegra210-car.h @@ -1,6 +1,16 @@ /* - * This header provides Tegra210-specific constants for binding - * nvidia,tegra210-car. + * This header provides constants for binding nvidia,tegra210-car. + * + * The first 224 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB + * registers. These IDs often match those in the CAR's RST_DEVICES registers, + * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In + * this case, those clocks are assigned IDs above 224 in order to highlight + * this issue. Implementations that interpret these clock IDs as bit values + * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to + * explicitly handle these special cases. + * + * The balance of the clocks controlled by the CAR are assigned IDs of 224 and + * above. */ #ifndef _DT_BINDINGS_CLOCK_TEGRA210_CAR_H @@ -14,7 +24,7 @@ #define TEGRA210_CLK_TIMER 5 #define TEGRA210_CLK_UARTA 6 /* 7 (register bit affects uartb and vfir) */ -/* 8 */ +#define TEGRA210_CLK_GPIO 8 #define TEGRA210_CLK_SDMMC2 9 /* 10 (register bit affects spdif_in and spdif_out) */ #define TEGRA210_CLK_I2S1 11 @@ -25,30 +35,31 @@ /* 16 */ #define TEGRA210_CLK_PWM 17 #define TEGRA210_CLK_I2S2 18 +/* 19 */ /* 20 (register bit affects vi and vi_sensor) */ /* 21 */ #define TEGRA210_CLK_USBD 22 #define TEGRA210_CLK_ISP 23 -/* 26 */ +/* 24 */ /* 25 */ #define TEGRA210_CLK_DISP2 26 #define TEGRA210_CLK_DISP1 27 #define TEGRA210_CLK_HOST1X 28 -#define TEGRA210_CLK_VCP 29 +/* 29 */ #define TEGRA210_CLK_I2S0 30 /* 31 */ #define TEGRA210_CLK_MC 32 -/* 33 */ +#define TEGRA210_CLK_AHBDMA 33 #define TEGRA210_CLK_APBDMA 34 /* 35 */ -#define TEGRA210_CLK_KBC 36 +/* 36 */ /* 37 */ -/* 38 */ +#define TEGRA210_CLK_PMC 38 /* 39 (register bit affects fuse and fuse_burn) */ #define TEGRA210_CLK_KFUSE 40 #define TEGRA210_CLK_SBC1 41 -#define TEGRA210_CLK_NOR 42 +/* 42 */ /* 43 */ #define TEGRA210_CLK_SBC2 44 /* 45 */ @@ -56,8 +67,8 @@ #define TEGRA210_CLK_I2C5 47 #define TEGRA210_CLK_DSIA 48 /* 49 */ -#define TEGRA210_CLK_MIPI 50 -#define TEGRA210_CLK_HDMI 51 +/* 50 */ +/* 51 */ #define TEGRA210_CLK_CSI 52 /* 53 */ #define TEGRA210_CLK_I2C2 54 @@ -65,10 +76,10 @@ #define TEGRA210_CLK_MIPI_CAL 56 #define TEGRA210_CLK_EMC 57 #define TEGRA210_CLK_USB2 58 -#define TEGRA210_CLK_USB3 59 +/* 59 */ /* 60 */ -#define TEGRA210_CLK_VDE 61 -#define TEGRA210_CLK_BSEA 62 +/* 61 */ +/* 62 */ #define TEGRA210_CLK_BSEV 63 /* 64 */ @@ -83,8 +94,8 @@ #define TEGRA210_CLK_CSITE 73 /* 74 */ /* 75 */ -#define TEGRA210_CLK_LA 76 -#define TEGRA210_CLK_TRACE 77 +/* 76 */ +/* 77 */ #define TEGRA210_CLK_SOC_THERM 78 #define TEGRA210_CLK_DTV 79 /* 80 */ @@ -98,7 +109,7 @@ /* 88 */ #define TEGRA210_CLK_XUSB_HOST 89 /* 90 */ -#define TEGRA210_CLK_MSENC 91 +/* 91 */ #define TEGRA210_CLK_CSUS 92 /* 93 */ /* 94 */ @@ -112,20 +123,20 @@ #define TEGRA210_CLK_I2S3 101 #define TEGRA210_CLK_I2S4 102 #define TEGRA210_CLK_I2C4 103 -#define TEGRA210_CLK_SBC5 104 -#define TEGRA210_CLK_SBC6 105 +/* 104 */ +/* 105 */ #define TEGRA210_CLK_D_AUDIO 106 -#define TEGRA210_CLK_APBIF 107 -#define TEGRA210_CLK_DAM0 108 -#define TEGRA210_CLK_DAM1 109 -#define TEGRA210_CLK_DAM2 110 +#define TEGRA210_CLK_APB2APE 107 +/* 108 */ +/* 109 */ +/* 110 */ #define TEGRA210_CLK_HDA2CODEC_2X 111 /* 112 */ -#define TEGRA210_CLK_AUDIO0_2X 113 -#define TEGRA210_CLK_AUDIO1_2X 114 -#define TEGRA210_CLK_AUDIO2_2X 115 -#define TEGRA210_CLK_AUDIO3_2X 116 -#define TEGRA210_CLK_AUDIO4_2X 117 +/* 113 */ +/* 114 */ +/* 115 */ +/* 116 */ +/* 117 */ #define TEGRA210_CLK_SPDIF_2X 118 #define TEGRA210_CLK_ACTMON 119 #define TEGRA210_CLK_EXTERN1 120 @@ -135,10 +146,10 @@ #define TEGRA210_CLK_SATA 124 #define TEGRA210_CLK_HDA 125 /* 126 */ -#define TEGRA210_CLK_SE 127 +/* 127 */ #define TEGRA210_CLK_HDA2HDMI 128 -#define TEGRA210_CLK_SATA_COLD 129 +/* 129 */ /* 130 */ /* 131 */ /* 132 */ @@ -152,19 +163,19 @@ /* 140 */ /* 141 */ /* 142 */ -/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */ -/* xusb_host_src and xusb_ss_src) */ +/* (bit affects xusb_falcon_src, xusb_fs_src, xusb_host_src and xusb_ss_src) */ +#define TEGRA210_CLK_XUSB_GATE 143 #define TEGRA210_CLK_CILAB 144 #define TEGRA210_CLK_CILCD 145 #define TEGRA210_CLK_CILE 146 #define TEGRA210_CLK_DSIALP 147 #define TEGRA210_CLK_DSIBLP 148 #define TEGRA210_CLK_ENTROPY 149 -#define TEGRA210_CLK_DDS 150 +/* 150 */ /* 151 */ -#define TEGRA210_CLK_DP2 152 -#define TEGRA210_CLK_AMX 153 -#define TEGRA210_CLK_ADX 154 +/* 152 */ +/* 153 */ +/* 154 */ /* 155 (bit affects dfll_ref and dfll_soc) */ #define TEGRA210_CLK_XUSB_SS 156 /* 157 */ @@ -172,8 +183,8 @@ /* 159 */ /* 160 */ -/* 161 */ -/* 162 */ +#define TEGRA210_CLK_DMIC1 161 +#define TEGRA210_CLK_DMIC2 162 /* 163 */ /* 164 */ /* 165 */ @@ -184,159 +195,207 @@ /* 170 */ #define TEGRA210_CLK_VIM2_CLK 171 /* 172 */ -/* 173 */ +#define TEGRA210_CLK_MIPIBIF 173 /* 174 */ /* 175 */ -#define TEGRA210_CLK_HDMI_AUDIO 176 +/* 176 */ #define TEGRA210_CLK_CLK72MHZ 177 #define TEGRA210_CLK_VIC03 178 /* 179 */ -#define TEGRA210_CLK_ADX1 180 +/* 180 */ #define TEGRA210_CLK_DPAUX 181 #define TEGRA210_CLK_SOR0 182 -/* 183 */ +#define TEGRA210_CLK_SOR1 183 #define TEGRA210_CLK_GPU 184 -#define TEGRA210_CLK_AMX1 185 +#define TEGRA210_CLK_DBGAPB 185 /* 186 */ -/* 187 */ +#define TEGRA210_CLK_PLL_P_OUT_ADSP 187 /* 188 */ -/* 189 */ +#define TEGRA210_CLK_PLL_G_REF 189 /* 190 */ /* 191 */ -#define TEGRA210_CLK_UARTB 192 -#define TEGRA210_CLK_VFIR 193 -#define TEGRA210_CLK_SPDIF_IN 194 -#define TEGRA210_CLK_SPDIF_OUT 195 -#define TEGRA210_CLK_VI 196 -#define TEGRA210_CLK_VI_SENSOR 197 -#define TEGRA210_CLK_FUSE 198 -#define TEGRA210_CLK_FUSE_BURN 199 -#define TEGRA210_CLK_CLK_32K 200 -#define TEGRA210_CLK_CLK_M 201 -#define TEGRA210_CLK_CLK_M_DIV2 202 -#define TEGRA210_CLK_CLK_M_DIV4 203 -#define TEGRA210_CLK_PLL_REF 204 -#define TEGRA210_CLK_PLL_C 205 -#define TEGRA210_CLK_PLL_C_OUT1 206 -#define TEGRA210_CLK_PLL_C2 207 -#define TEGRA210_CLK_PLL_C3 208 -#define TEGRA210_CLK_PLL_M 209 -#define TEGRA210_CLK_PLL_M_OUT1 210 -#define TEGRA210_CLK_PLL_P 211 -#define TEGRA210_CLK_PLL_P_OUT1 212 -#define TEGRA210_CLK_PLL_P_OUT2 213 -#define TEGRA210_CLK_PLL_P_OUT3 214 -#define TEGRA210_CLK_PLL_P_OUT4 215 -#define TEGRA210_CLK_PLL_A 216 -#define TEGRA210_CLK_PLL_A_OUT0 217 -#define TEGRA210_CLK_PLL_D 218 -#define TEGRA210_CLK_PLL_D_OUT0 219 -#define TEGRA210_CLK_PLL_D2 220 -#define TEGRA210_CLK_PLL_D2_OUT0 221 -#define TEGRA210_CLK_PLL_U 222 -#define TEGRA210_CLK_PLL_U_480M 223 -#define TEGRA210_CLK_PLL_U_60M 224 -#define TEGRA210_CLK_PLL_U_48M 225 -#define TEGRA210_CLK_PLL_U_12M 226 -/* 227 */ -/* 228 */ -#define TEGRA210_CLK_PLL_RE_VCO 229 -#define TEGRA210_CLK_PLL_RE_OUT 230 -#define TEGRA210_CLK_PLL_E 231 -#define TEGRA210_CLK_SPDIF_IN_SYNC 232 -#define TEGRA210_CLK_I2S0_SYNC 233 -#define TEGRA210_CLK_I2S1_SYNC 234 -#define TEGRA210_CLK_I2S2_SYNC 235 -#define TEGRA210_CLK_I2S3_SYNC 236 -#define TEGRA210_CLK_I2S4_SYNC 237 -#define TEGRA210_CLK_VIMCLK_SYNC 238 -#define TEGRA210_CLK_AUDIO0 239 -#define TEGRA210_CLK_AUDIO1 240 -#define TEGRA210_CLK_AUDIO2 241 -#define TEGRA210_CLK_AUDIO3 242 -#define TEGRA210_CLK_AUDIO4 243 -#define TEGRA210_CLK_SPDIF 244 -#define TEGRA210_CLK_CLK_OUT_1 245 -#define TEGRA210_CLK_CLK_OUT_2 246 -#define TEGRA210_CLK_CLK_OUT_3 247 -#define TEGRA210_CLK_BLINK 248 -/* 249 */ -/* 250 */ -/* 251 */ -#define TEGRA210_CLK_XUSB_HOST_SRC 252 -#define TEGRA210_CLK_XUSB_FALCON_SRC 253 -#define TEGRA210_CLK_XUSB_FS_SRC 254 -#define TEGRA210_CLK_XUSB_SS_SRC 255 +/* 192 */ +#define TEGRA210_CLK_SDMMC_LEGACY 193 +#define TEGRA210_CLK_NVDEC 194 +#define TEGRA210_CLK_NVJPG 195 +/* 196 */ +#define TEGRA210_CLK_DMIC3 197 +#define TEGRA210_CLK_APE 198 +/* 199 */ +/* 200 */ +/* 201 */ +#define TEGRA210_CLK_MAUD 202 +/* 203 */ +/* 204 */ +/* 205 */ +#define TEGRA210_CLK_TSECB 206 +#define TEGRA210_CLK_DPAUX1 207 +#define TEGRA210_CLK_VI_I2C 208 +#define TEGRA210_CLK_HSIC_TRK 209 +#define TEGRA210_CLK_USB2_TRK 210 +#define TEGRA210_CLK_QSPI 211 +#define TEGRA210_CLK_UARTAPE 212 +/* 213 */ +/* 214 */ +/* 215 */ +/* 216 */ +/* 217 */ +/* 218 */ +#define TEGRA210_CLK_NVENC 219 +/* 220 */ +/* 221 */ +#define TEGRA210_CLK_SOR_SAFE 222 +#define TEGRA210_CLK_PLL_P_OUT_CPU 223 -#define TEGRA210_CLK_XUSB_DEV_SRC 256 -#define TEGRA210_CLK_XUSB_DEV 257 -#define TEGRA210_CLK_XUSB_HS_SRC 258 -#define TEGRA210_CLK_SCLK 259 -#define TEGRA210_CLK_HCLK 260 -#define TEGRA210_CLK_PCLK 261 -/* 262 */ -/* 263 */ -#define TEGRA210_CLK_DFLL_REF 264 -#define TEGRA210_CLK_DFLL_SOC 265 -#define TEGRA210_CLK_VI_SENSOR2 266 -#define TEGRA210_CLK_PLL_P_OUT5 267 -#define TEGRA210_CLK_CML0 268 -#define TEGRA210_CLK_CML1 269 -#define TEGRA210_CLK_PLL_C4 270 -#define TEGRA210_CLK_PLL_DP 271 -#define TEGRA210_CLK_PLL_E_MUX 272 -#define TEGRA210_CLK_PLLD_DSI 273 -/* 274 */ -/* 275 */ -/* 276 */ -/* 277 */ -/* 278 */ -/* 279 */ -/* 280 */ + +#define TEGRA210_CLK_UARTB 224 +#define TEGRA210_CLK_VFIR 225 +#define TEGRA210_CLK_SPDIF_IN 226 +#define TEGRA210_CLK_SPDIF_OUT 227 +#define TEGRA210_CLK_VI 228 +#define TEGRA210_CLK_VI_SENSOR 229 +#define TEGRA210_CLK_FUSE 230 +#define TEGRA210_CLK_FUSE_BURN 231 +#define TEGRA210_CLK_CLK_32K 232 +#define TEGRA210_CLK_CLK_M 233 +#define TEGRA210_CLK_CLK_M_DIV2 234 +#define TEGRA210_CLK_CLK_M_DIV4 235 +#define TEGRA210_CLK_PLL_REF 236 +#define TEGRA210_CLK_PLL_C 237 +#define TEGRA210_CLK_PLL_C_OUT1 238 +#define TEGRA210_CLK_PLL_C2 239 +#define TEGRA210_CLK_PLL_C3 240 +#define TEGRA210_CLK_PLL_M 241 +#define TEGRA210_CLK_PLL_M_OUT1 242 +#define TEGRA210_CLK_PLL_P 243 +#define TEGRA210_CLK_PLL_P_OUT1 244 +#define TEGRA210_CLK_PLL_P_OUT2 245 +#define TEGRA210_CLK_PLL_P_OUT3 246 +#define TEGRA210_CLK_PLL_P_OUT4 247 +#define TEGRA210_CLK_PLL_A 248 +#define TEGRA210_CLK_PLL_A_OUT0 249 +#define TEGRA210_CLK_PLL_D 250 +#define TEGRA210_CLK_PLL_D_OUT0 251 +#define TEGRA210_CLK_PLL_D2 252 +#define TEGRA210_CLK_PLL_D2_OUT0 253 +#define TEGRA210_CLK_PLL_U 254 +#define TEGRA210_CLK_PLL_U_480M 255 + +#define TEGRA210_CLK_PLL_U_60M 256 +#define TEGRA210_CLK_PLL_U_48M 257 +/* 258 */ +#define TEGRA210_CLK_PLL_X 259 +#define TEGRA210_CLK_PLL_X_OUT0 260 +#define TEGRA210_CLK_PLL_RE_VCO 261 +#define TEGRA210_CLK_PLL_RE_OUT 262 +#define TEGRA210_CLK_PLL_E 263 +#define TEGRA210_CLK_SPDIF_IN_SYNC 264 +#define TEGRA210_CLK_I2S0_SYNC 265 +#define TEGRA210_CLK_I2S1_SYNC 266 +#define TEGRA210_CLK_I2S2_SYNC 267 +#define TEGRA210_CLK_I2S3_SYNC 268 +#define TEGRA210_CLK_I2S4_SYNC 269 +#define TEGRA210_CLK_VIMCLK_SYNC 270 +#define TEGRA210_CLK_AUDIO0 271 +#define TEGRA210_CLK_AUDIO1 272 +#define TEGRA210_CLK_AUDIO2 273 +#define TEGRA210_CLK_AUDIO3 274 +#define TEGRA210_CLK_AUDIO4 275 +#define TEGRA210_CLK_SPDIF 276 +#define TEGRA210_CLK_CLK_OUT_1 277 +#define TEGRA210_CLK_CLK_OUT_2 278 +#define TEGRA210_CLK_CLK_OUT_3 279 +#define TEGRA210_CLK_BLINK 280 /* 281 */ /* 282 */ /* 283 */ -/* 284 */ -/* 285 */ -/* 286 */ -/* 287 */ - -/* 288 */ -/* 289 */ -/* 290 */ -/* 291 */ -/* 292 */ -/* 293 */ -/* 294 */ -/* 295 */ -/* 296 */ -/* 297 */ -/* 298 */ -/* 299 */ -#define TEGRA210_CLK_AUDIO0_MUX 300 -#define TEGRA210_CLK_AUDIO1_MUX 301 -#define TEGRA210_CLK_AUDIO2_MUX 302 -#define TEGRA210_CLK_AUDIO3_MUX 303 -#define TEGRA210_CLK_AUDIO4_MUX 304 -#define TEGRA210_CLK_SPDIF_MUX 305 -#define TEGRA210_CLK_CLK_OUT_1_MUX 306 -#define TEGRA210_CLK_CLK_OUT_2_MUX 307 -#define TEGRA210_CLK_CLK_OUT_3_MUX 308 -/* 309 */ -/* 310 */ -#define TEGRA210_CLK_SOR0_LVDS 311 -#define TEGRA210_CLK_XUSB_SS_DIV2 312 +#define TEGRA210_CLK_XUSB_HOST_SRC 284 +#define TEGRA210_CLK_XUSB_FALCON_SRC 285 +#define TEGRA210_CLK_XUSB_FS_SRC 286 +#define TEGRA210_CLK_XUSB_SS_SRC 287 -#define TEGRA210_CLK_PLL_M_UD 313 -#define TEGRA210_CLK_PLL_C_UD 314 +#define TEGRA210_CLK_XUSB_DEV_SRC 288 +#define TEGRA210_CLK_XUSB_DEV 289 +#define TEGRA210_CLK_XUSB_HS_SRC 290 +#define TEGRA210_CLK_SCLK 291 +#define TEGRA210_CLK_HCLK 292 +#define TEGRA210_CLK_PCLK 293 +#define TEGRA210_CLK_CCLK_G 294 +#define TEGRA210_CLK_CCLK_LP 295 +#define TEGRA210_CLK_DFLL_REF 296 +#define TEGRA210_CLK_DFLL_SOC 297 +#define TEGRA210_CLK_VI_SENSOR2 298 +#define TEGRA210_CLK_PLL_P_OUT5 299 +#define TEGRA210_CLK_CML0 300 +#define TEGRA210_CLK_CML1 301 +#define TEGRA210_CLK_PLL_C4 302 +#define TEGRA210_CLK_PLL_DP 303 +#define TEGRA210_CLK_PLL_E_MUX 304 +#define TEGRA210_CLK_PLL_MB 305 +#define TEGRA210_CLK_PLL_A1 306 +#define TEGRA210_CLK_PLL_D_DSI_OUT 307 +#define TEGRA210_CLK_PLL_C4_OUT0 308 +#define TEGRA210_CLK_PLL_C4_OUT1 309 +#define TEGRA210_CLK_PLL_C4_OUT2 310 +#define TEGRA210_CLK_PLL_C4_OUT3 311 +#define TEGRA210_CLK_PLL_U_OUT 312 +#define TEGRA210_CLK_PLL_U_OUT1 313 +#define TEGRA210_CLK_PLL_U_OUT2 314 +#define TEGRA210_CLK_USB2_HSIC_TRK 315 +#define TEGRA210_CLK_PLL_P_OUT_HSIO 316 +#define TEGRA210_CLK_PLL_P_OUT_XUSB 317 +#define TEGRA210_CLK_XUSB_SSP_SRC 318 +#define TEGRA210_CLK_PLL_RE_OUT1 319 +/* 320 */ +/* 321 */ +/* 322 */ +/* 323 */ +/* 324 */ +/* 325 */ +/* 326 */ +/* 327 */ +/* 328 */ +/* 329 */ +/* 330 */ +/* 331 */ +/* 332 */ +/* 333 */ +/* 334 */ +/* 335 */ +/* 336 */ +/* 337 */ +/* 338 */ +/* 339 */ +/* 340 */ +/* 341 */ +/* 342 */ +/* 343 */ +/* 344 */ +/* 345 */ +/* 346 */ +/* 347 */ +/* 348 */ +/* 349 */ -#define TEGRA210_CLK_PLL_X 227 -#define TEGRA210_CLK_PLL_X_OUT0 228 +#define TEGRA210_CLK_AUDIO0_MUX 350 +#define TEGRA210_CLK_AUDIO1_MUX 351 +#define TEGRA210_CLK_AUDIO2_MUX 352 +#define TEGRA210_CLK_AUDIO3_MUX 353 +#define TEGRA210_CLK_AUDIO4_MUX 354 +#define TEGRA210_CLK_SPDIF_MUX 355 +#define TEGRA210_CLK_CLK_OUT_1_MUX 356 +#define TEGRA210_CLK_CLK_OUT_2_MUX 357 +#define TEGRA210_CLK_CLK_OUT_3_MUX 358 +#define TEGRA210_CLK_DSIA_MUX 359 +#define TEGRA210_CLK_DSIB_MUX 360 +#define TEGRA210_CLK_SOR0_LVDS 361 +#define TEGRA210_CLK_XUSB_SS_DIV2 362 -#define TEGRA210_CLK_CCLK_G 262 -#define TEGRA210_CLK_CCLK_LP 263 +#define TEGRA210_CLK_PLL_M_UD 363 +#define TEGRA210_CLK_PLL_C_UD 364 +#define TEGRA210_CLK_SCLK_MUX 365 -#define TEGRA210_CLK_CLK_MAX 315 +#define TEGRA210_CLK_CLK_MAX 366 -#endif /* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */ +#endif /* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */ diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h index 22445820a9..889e49ba0a 100644 --- a/include/dt-bindings/clock/tegra30-car.h +++ b/include/dt-bindings/clock/tegra30-car.h @@ -92,7 +92,7 @@ #define TEGRA30_CLK_OWR 71 #define TEGRA30_CLK_AFI 72 #define TEGRA30_CLK_CSITE 73 -#define TEGRA30_CLK_PCIEX 74 +/* 74 */ #define TEGRA30_CLK_AVPUCQ 75 #define TEGRA30_CLK_LA 76 /* 77 */ diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h new file mode 100644 index 0000000000..a3a6b405eb --- /dev/null +++ b/include/dt-bindings/comphy/comphy_data.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015-2016 Marvell International Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _COMPHY_DATA_H_ +#define _COMPHY_DATA_H_ + +#define PHY_SPEED_1_25G 0 +#define PHY_SPEED_1_5G 1 +#define PHY_SPEED_2_5G 2 +#define PHY_SPEED_3G 3 +#define PHY_SPEED_3_125G 4 +#define PHY_SPEED_5G 5 +#define PHY_SPEED_6G 6 +#define PHY_SPEED_6_25G 7 +#define PHY_SPEED_10_3125G 8 +#define PHY_SPEED_MAX 9 +#define PHY_SPEED_INVALID 0xff + +#define PHY_TYPE_UNCONNECTED 0 +#define PHY_TYPE_PEX0 1 +#define PHY_TYPE_PEX1 2 +#define PHY_TYPE_PEX2 3 +#define PHY_TYPE_PEX3 4 +#define PHY_TYPE_SATA0 5 +#define PHY_TYPE_SATA1 6 +#define PHY_TYPE_SATA2 7 +#define PHY_TYPE_SATA3 8 +#define PHY_TYPE_SGMII0 9 +#define PHY_TYPE_SGMII1 10 +#define PHY_TYPE_SGMII2 11 +#define PHY_TYPE_SGMII3 12 +#define PHY_TYPE_QSGMII 13 +#define PHY_TYPE_USB3_HOST0 14 +#define PHY_TYPE_USB3_HOST1 15 +#define PHY_TYPE_USB3_DEVICE 16 +#define PHY_TYPE_XAUI0 17 +#define PHY_TYPE_XAUI1 18 +#define PHY_TYPE_XAUI2 19 +#define PHY_TYPE_XAUI3 20 +#define PHY_TYPE_RXAUI0 21 +#define PHY_TYPE_RXAUI1 22 +#define PHY_TYPE_KR 23 +#define PHY_TYPE_MAX 24 +#define PHY_TYPE_INVALID 0xff + +#define PHY_POLARITY_NO_INVERT 0 +#define PHY_POLARITY_TXD_INVERT 1 +#define PHY_POLARITY_RXD_INVERT 2 +#define PHY_POLARITY_ALL_INVERT \ + (PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT) + +#define UTMI_PHY_TO_USB_HOST0 0 +#define UTMI_PHY_TO_USB_HOST1 1 +#define UTMI_PHY_TO_USB_DEVICE0 2 +#define UTMI_PHY_INVALID 0xff + +#endif /* _COMPHY_DATA_H_ */ + diff --git a/include/dt-bindings/memory/tegra114-mc.h b/include/dt-bindings/memory/tegra114-mc.h new file mode 100644 index 0000000000..8f48985a31 --- /dev/null +++ b/include/dt-bindings/memory/tegra114-mc.h @@ -0,0 +1,25 @@ +#ifndef DT_BINDINGS_MEMORY_TEGRA114_MC_H +#define DT_BINDINGS_MEMORY_TEGRA114_MC_H + +#define TEGRA_SWGROUP_PTC 0 +#define TEGRA_SWGROUP_DC 1 +#define TEGRA_SWGROUP_DCB 2 +#define TEGRA_SWGROUP_EPP 3 +#define TEGRA_SWGROUP_G2 4 +#define TEGRA_SWGROUP_AVPC 5 +#define TEGRA_SWGROUP_NV 6 +#define TEGRA_SWGROUP_HDA 7 +#define TEGRA_SWGROUP_HC 8 +#define TEGRA_SWGROUP_MSENC 9 +#define TEGRA_SWGROUP_PPCS 10 +#define TEGRA_SWGROUP_VDE 11 +#define TEGRA_SWGROUP_MPCORELP 12 +#define TEGRA_SWGROUP_MPCORE 13 +#define TEGRA_SWGROUP_VI 14 +#define TEGRA_SWGROUP_ISP 15 +#define TEGRA_SWGROUP_XUSB_HOST 16 +#define TEGRA_SWGROUP_XUSB_DEV 17 +#define TEGRA_SWGROUP_EMUCIF 18 +#define TEGRA_SWGROUP_TSEC 19 + +#endif diff --git a/include/dt-bindings/memory/tegra210-mc.h b/include/dt-bindings/memory/tegra210-mc.h new file mode 100644 index 0000000000..d1731bc14d --- /dev/null +++ b/include/dt-bindings/memory/tegra210-mc.h @@ -0,0 +1,36 @@ +#ifndef DT_BINDINGS_MEMORY_TEGRA210_MC_H +#define DT_BINDINGS_MEMORY_TEGRA210_MC_H + +#define TEGRA_SWGROUP_PTC 0 +#define TEGRA_SWGROUP_DC 1 +#define TEGRA_SWGROUP_DCB 2 +#define TEGRA_SWGROUP_AFI 3 +#define TEGRA_SWGROUP_AVPC 4 +#define TEGRA_SWGROUP_HDA 5 +#define TEGRA_SWGROUP_HC 6 +#define TEGRA_SWGROUP_NVENC 7 +#define TEGRA_SWGROUP_PPCS 8 +#define TEGRA_SWGROUP_SATA 9 +#define TEGRA_SWGROUP_MPCORE 10 +#define TEGRA_SWGROUP_ISP2 11 +#define TEGRA_SWGROUP_XUSB_HOST 12 +#define TEGRA_SWGROUP_XUSB_DEV 13 +#define TEGRA_SWGROUP_ISP2B 14 +#define TEGRA_SWGROUP_TSEC 15 +#define TEGRA_SWGROUP_A9AVP 16 +#define TEGRA_SWGROUP_GPU 17 +#define TEGRA_SWGROUP_SDMMC1A 18 +#define TEGRA_SWGROUP_SDMMC2A 19 +#define TEGRA_SWGROUP_SDMMC3A 20 +#define TEGRA_SWGROUP_SDMMC4A 21 +#define TEGRA_SWGROUP_VIC 22 +#define TEGRA_SWGROUP_VI 23 +#define TEGRA_SWGROUP_NVDEC 24 +#define TEGRA_SWGROUP_APE 25 +#define TEGRA_SWGROUP_NVJPG 26 +#define TEGRA_SWGROUP_SE 27 +#define TEGRA_SWGROUP_AXIAP 28 +#define TEGRA_SWGROUP_ETR 29 +#define TEGRA_SWGROUP_TSECB 30 + +#endif diff --git a/include/dt-bindings/memory/tegra30-mc.h b/include/dt-bindings/memory/tegra30-mc.h new file mode 100644 index 0000000000..502beb03d7 --- /dev/null +++ b/include/dt-bindings/memory/tegra30-mc.h @@ -0,0 +1,24 @@ +#ifndef DT_BINDINGS_MEMORY_TEGRA30_MC_H +#define DT_BINDINGS_MEMORY_TEGRA30_MC_H + +#define TEGRA_SWGROUP_PTC 0 +#define TEGRA_SWGROUP_DC 1 +#define TEGRA_SWGROUP_DCB 2 +#define TEGRA_SWGROUP_EPP 3 +#define TEGRA_SWGROUP_G2 4 +#define TEGRA_SWGROUP_MPE 5 +#define TEGRA_SWGROUP_VI 6 +#define TEGRA_SWGROUP_AFI 7 +#define TEGRA_SWGROUP_AVPC 8 +#define TEGRA_SWGROUP_NV 9 +#define TEGRA_SWGROUP_NV2 10 +#define TEGRA_SWGROUP_HDA 11 +#define TEGRA_SWGROUP_HC 12 +#define TEGRA_SWGROUP_PPCS 13 +#define TEGRA_SWGROUP_SATA 14 +#define TEGRA_SWGROUP_VDE 15 +#define TEGRA_SWGROUP_MPCORELP 16 +#define TEGRA_SWGROUP_MPCORE 17 +#define TEGRA_SWGROUP_ISP 18 + +#endif diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h index 85aaf66690..729ab9fc32 100644 --- a/include/dt-bindings/thermal/tegra124-soctherm.h +++ b/include/dt-bindings/thermal/tegra124-soctherm.h @@ -9,5 +9,6 @@ #define TEGRA124_SOCTHERM_SENSOR_MEM 1 #define TEGRA124_SOCTHERM_SENSOR_GPU 2 #define TEGRA124_SOCTHERM_SENSOR_PLLX 3 +#define TEGRA124_SOCTHERM_SENSOR_NUM 4 #endif |