diff options
108 files changed, 5162 insertions, 290 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f0e7fde137..f5d4d39683 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -528,6 +528,12 @@ config ARCH_BCM283X imply CMD_DM imply FAT_WRITE +config ARCH_BCM6858 + bool "Broadcom BCM6858 family" + select DM + select OF_CONTROL + imply CMD_DM + config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" select CPU_V7A @@ -1490,6 +1496,7 @@ source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" +source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/broadcom/bcmns2/Kconfig" diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index c8bebabdf6..ff42791fb4 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -144,6 +144,13 @@ config ARMV8_PSCI_CPUS_PER_CLUSTER A value 0 or no definition of it works for single cluster system. System with multi-cluster should difine their own exact value. +config ARMV8_EA_EL3_FIRST + bool "External aborts and SError interrupt exception are taken in EL3" + default n + help + Exception handling at all exception levels for External Abort and + SError interrupt exception are taken in EL3. + if SYS_HAS_ARMV8_SECURE_BASE config ARMV8_SECURE_BASE diff --git a/arch/arm/cpu/armv8/psci.S b/arch/arm/cpu/armv8/psci.S index 097f91bace..358df8fee9 100644 --- a/arch/arm/cpu/armv8/psci.S +++ b/arch/arm/cpu/armv8/psci.S @@ -236,6 +236,28 @@ handle_sync: b unhandled_exception +#ifdef CONFIG_ARMV8_EA_EL3_FIRST +/* + * Override this function if custom error handling is + * needed for asynchronous aborts + */ +ENTRY(plat_error_handler) + ret +ENDPROC(plat_error_handler) +.weak plat_error_handler + +handle_error: + bl psci_get_cpu_id + bl psci_get_cpu_stack_top + mov x9, #1 + msr spsel, x9 + mov sp, x0 + + bl plat_error_handler /* Platform specific error handling */ +deadloop: + b deadloop /* Never return */ +#endif + .align 11 .globl el3_exception_vectors el3_exception_vectors: @@ -261,7 +283,11 @@ el3_exception_vectors: .align 7 b unhandled_exception /* FIQ, Lower EL using AArch64 */ .align 7 +#ifdef CONFIG_ARMV8_EA_EL3_FIRST + b handle_error /* SError, Lower EL using AArch64 */ +#else b unhandled_exception /* SError, Lower EL using AArch64 */ +#endif .align 7 b unhandled_exception /* Sync, Lower EL using AArch32 */ .align 7 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 1cbb45d679..7ed222db86 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -559,7 +559,7 @@ dtb-$(CONFIG_TARGET_STM32MP1) += \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb -dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb +dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb targets += $(dtb-y) diff --git a/arch/arm/dts/am3517-evm.dts b/arch/arm/dts/am3517-evm.dts index 98aadb0f81..1d158cfda1 100644 --- a/arch/arm/dts/am3517-evm.dts +++ b/arch/arm/dts/am3517-evm.dts @@ -127,6 +127,7 @@ status = "okay"; pinctrl-names = "default"; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ + vcc-supply = <&vdd_io_reg>; port { lcd_in: endpoint { @@ -154,6 +155,7 @@ bl: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; + power-supply = <&vdd_io_reg>; pinctrl-0 = <&backlight_pins>; pwms = <&pwm11 0 5000000 0>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -168,6 +170,13 @@ ti,timers = <&timer11>; #pwm-cells = <3>; }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ + #phy-cells = <0>; + }; }; &davinci_emac { @@ -203,6 +212,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; }; }; @@ -220,15 +230,21 @@ cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ }; -&mmc2 { +&mmc3 { status = "disabled"; }; -&mmc3 { - status = "disabled"; +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -287,4 +303,32 @@ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ >; }; + + hsusb1_rst_pins: pinmux_hsusb1_rst_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; + + hsusb1_pins: pinmux_hsusb1_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + >; + }; }; diff --git a/arch/arm/dts/am3517-som.dtsi b/arch/arm/dts/am3517-som.dtsi index a6d5ff73c1..dae6e458e5 100644 --- a/arch/arm/dts/am3517-som.dtsi +++ b/arch/arm/dts/am3517-som.dtsi @@ -14,6 +14,32 @@ cpu0-supply = <&vdd_core_reg>; }; }; + + wl12xx_buffer: wl12xx_buf { + compatible = "regulator-fixed"; + regulator-name = "wl1271_buf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_buffer_pins>; + gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */ + regulator-always-on; + vin-supply = <&vdd_1v8_reg>; + }; + + wl12xx_vmmc2: wl12xx_vmmc2 { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_wkup_pins>; + gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */ + startup-delay-us = <70000>; + enable-active-high; + regulator-always-on; + vin-supply = <&wl12xx_buffer>; + }; }; &gpmc { @@ -64,7 +90,6 @@ regulators { vdd_core_reg: VDCDC1 { regulator-name = "vdd_core"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -72,7 +97,6 @@ vdd_io_reg: VDCDC2 { regulator-name = "vdd_io"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -80,7 +104,6 @@ vdd_1v8_reg: VDCDC3 { regulator-name = "vdd_1v8"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -88,7 +111,6 @@ vdd_usb18_reg: LDO1 { regulator-name = "vdd_usb18"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -96,7 +118,6 @@ vdd_usb33_reg: LDO2 { regulator-name = "vdd_usb33"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -126,8 +147,63 @@ }; }; +&mmc2 { + interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>; + + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&wl12xx_vmmc2>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "ti,wl1271-st"; + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */ + max-speed = <3000000>; + }; +}; + &omap3_pmx_core { + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + rtc_pins: pinmux_rtc_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ @@ -139,4 +215,23 @@ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */ + >; + }; +}; + +&omap3_pmx_wkup { + + wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; diff --git a/arch/arm/dts/am3517.dtsi b/arch/arm/dts/am3517.dtsi index 4b6062b631..23ea381d36 100644 --- a/arch/arm/dts/am3517.dtsi +++ b/arch/arm/dts/am3517.dtsi @@ -91,6 +91,11 @@ }; }; +/* Table Table 5-79 of the TRM shows 480ab000 is reserved */ +&usb_otg_hs { + status = "disabled"; +}; + &iva { status = "disabled"; }; diff --git a/arch/arm/dts/at91sam9260-smartweb.dts b/arch/arm/dts/at91sam9260-smartweb.dts index e59781bf45..a22de2d927 100644 --- a/arch/arm/dts/at91sam9260-smartweb.dts +++ b/arch/arm/dts/at91sam9260-smartweb.dts @@ -89,6 +89,7 @@ }; watchdog@fffffd40 { + timeout-sec = <15>; status = "okay"; }; diff --git a/arch/arm/dts/at91sam9g20-taurus.dts b/arch/arm/dts/at91sam9g20-taurus.dts index 7931c0af7b..cee228bb8c 100644 --- a/arch/arm/dts/at91sam9g20-taurus.dts +++ b/arch/arm/dts/at91sam9g20-taurus.dts @@ -98,6 +98,7 @@ }; watchdog@fffffd40 { + timeout-sec = <15>; status = "okay"; }; diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi new file mode 100644 index 0000000000..9869d729d3 --- /dev/null +++ b/arch/arm/dts/bcm6858.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> + */ + +#include "skeleton64.dtsi" + +/ { + compatible = "brcm,bcm6858"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + u-boot,dm-pre-reloc; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + u-boot,dm-pre-reloc; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + u-boot,dm-pre-reloc; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + u-boot,dm-pre-reloc; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + u-boot,dm-pre-reloc; + }; + + l2: l2-cache0 { + compatible = "cache"; + u-boot,dm-pre-reloc; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + u-boot,dm-pre-reloc; + + periph_osc: periph-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + u-boot,dm-pre-reloc; + }; + }; + + ubus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + u-boot,dm-pre-reloc; + + uart0: serial@ff800640 { + compatible = "brcm,bcm6858-uart"; + reg = <0x0 0xff800640 0x0 0x18>; + clocks = <&periph_osc>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/bcm968580xref.dts b/arch/arm/dts/bcm968580xref.dts new file mode 100644 index 0000000000..0c59f94710 --- /dev/null +++ b/arch/arm/dts/bcm968580xref.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> + */ + +/dts-v1/; + +#include "bcm6858.dtsi" + +/ { + model = "Broadcom bcm68580xref"; + compatible = "broadcom,bcm68580xref", "brcm,bcm6858"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x20000000>; + }; +}; + +&uart0 { + u-boot,dm-pre-reloc; + status = "okay"; +}; diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi index 2409344df4..adcd6341e4 100644 --- a/arch/arm/dts/k3-am65-main.dtsi +++ b/arch/arm/dts/k3-am65-main.dtsi @@ -8,13 +8,13 @@ &cbass_main { gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x01800000 0x10000>, /* GICD */ - <0x01880000 0x90000>; /* GICR */ + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01880000 0x00 0x90000>; /* GICR */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt @@ -23,9 +23,50 @@ gic_its: gic-its@18200000 { compatible = "arm,gic-v3-its"; - reg = <0x01820000 0x10000>; + reg = <0x00 0x01820000 0x00 0x10000>; msi-controller; #msi-cells = <1>; }; }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart1: serial@2810000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; + + main_uart2: serial@2820000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; }; diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi new file mode 100644 index 0000000000..8c611d16df --- /dev/null +++ b/arch/arm/dts/k3-am65-mcu.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family MCU Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu { + mcu_uart0: serial@40a00000 { + compatible = "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + }; +}; diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi new file mode 100644 index 0000000000..8d7b47f9df --- /dev/null +++ b/arch/arm/dts/k3-am65-wakeup.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_wakeup { + dmsc: dmsc { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,am654-uart"; + reg = <0x42300000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + }; +}; diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi index cede1fa098..3d4bf369d0 100644 --- a/arch/arm/dts/k3-am65.dtsi +++ b/arch/arm/dts/k3-am65.dtsi @@ -16,6 +16,14 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + }; + chosen { }; firmware { @@ -46,38 +54,38 @@ cbass_main: interconnect@100000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ - <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ - <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ - <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ - <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ /* MCUSS Range */ - <0x28380000 0x00 0x28380000 0x03880000>, - <0x40200000 0x00 0x40200000 0x00900100>, - <0x42040000 0x00 0x42040000 0x03ac2400>, - <0x45100000 0x00 0x45100000 0x00c24000>, - <0x46000000 0x00 0x46000000 0x00200000>, - <0x47000000 0x00 0x47000000 0x00068400>; + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ - <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ - <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ - <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ - <0x46000000 0x46000000 0x00200000>, /* CPSW */ - <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; /* WKUP Basic peripherals */ - ranges = <0x42040000 0x42040000 0x03ac2400>; + ranges = <0x42040000 0x00 0x42040000 0x03ac2400>; }; }; }; @@ -85,3 +93,5 @@ /* Now include the peripherals for each bus segments */ #include "k3-am65-main.dtsi" +#include "k3-am65-mcu.dtsi" +#include "k3-am65-wakeup.dtsi" diff --git a/arch/arm/dts/k3-am654-base-board-ddr4-1600MHz.dtsi b/arch/arm/dts/k3-am654-base-board-ddr4-1600MHz.dtsi new file mode 100644 index 0000000000..e861cb7c67 --- /dev/null +++ b/arch/arm/dts/k3-am654-base-board-ddr4-1600MHz.dtsi @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * This file was generated by the AM65x_DRA80xM EMIF Tool: + * http://www.ti.com/lit/pdf/spracj0 + * Configuration Parameters + * Memory Type: DDR4 + * Data Rate: 1600 + * ECC Enabled: No + * Data Width: 32 + */ +#define DDR_PLL_FREQUENCY 400000000 +#define DDRCTL_MSTR 0x41040010 +#define DDRCTL_RFSHCTL0 0x00210070 +#define DDRCTL_ECCCFG0 0x00000000 +#define DDRCTL_RFSHTMG 0x0061008C +#define DDRCTL_CRCPARCTL0 0x00008000 +#define DDRCTL_CRCPARCTL1 0x1A000000 +#define DDRCTL_CRCPARCTL2 0x0048051E +#define DDRCTL_INIT0 0x400100C4 +#define DDRCTL_INIT1 0x004F0000 +#define DDRCTL_INIT3 0x02140501 +#define DDRCTL_INIT4 0x00000020 +#define DDRCTL_INIT5 0x00100000 +#define DDRCTL_INIT6 0x00000480 +#define DDRCTL_INIT7 0x000004E8 +#define DDRCTL_DRAMTMG0 0x0C0A1B0D +#define DDRCTL_DRAMTMG1 0x00030313 +#define DDRCTL_DRAMTMG2 0x0506050A +#define DDRCTL_DRAMTMG3 0x0000400C +#define DDRCTL_DRAMTMG4 0x06020206 +#define DDRCTL_DRAMTMG5 0x04040302 +#define DDRCTL_DRAMTMG6 0x00000004 +#define DDRCTL_DRAMTMG7 0x00000404 +#define DDRCTL_DRAMTMG8 0x03030C05 +#define DDRCTL_DRAMTMG9 0x00020208 +#define DDRCTL_DRAMTMG10 0x001C180A +#define DDRCTL_DRAMTMG11 0x1106010E +#define DDRCTL_DRAMTMG12 0x00020008 +#define DDRCTL_DRAMTMG13 0x0B100002 +#define DDRCTL_DRAMTMG14 0x00000000 +#define DDRCTL_DRAMTMG15 0x0000003F +#define DDRCTL_DRAMTMG17 0x00500028 +#define DDRCTL_ZQCTL0 0x21000040 +#define DDRCTL_ZQCTL1 0x0202FAF0 +#define DDRCTL_DFITMG0 0x04888206 +#define DDRCTL_DFITMG1 0x000A0606 +#define DDRCTL_DFITMG2 0x00000604 +#define DDRCTL_DFIMISC 0x00000001 +#define DDRCTL_ADDRMAP0 0x001F1F1F +#define DDRCTL_ADDRMAP1 0x003F0808 +#define DDRCTL_ADDRMAP2 0x00000000 +#define DDRCTL_ADDRMAP3 0x00000000 +#define DDRCTL_ADDRMAP4 0x00001F1F +#define DDRCTL_ADDRMAP5 0x08080808 +#define DDRCTL_ADDRMAP6 0x08080808 +#define DDRCTL_ADDRMAP7 0x00000F0F +#define DDRCTL_ADDRMAP8 0x00000A0A +#define DDRCTL_ADDRMAP9 0x00000000 +#define DDRCTL_ADDRMAP10 0x00000000 +#define DDRCTL_ADDRMAP11 0x001F1F00 +#define DDRCTL_DQMAP0 0x00000000 +#define DDRCTL_DQMAP1 0x00000000 +#define DDRCTL_DQMAP4 0x00000000 +#define DDRCTL_DQMAP5 0x00000000 +#define DDRCTL_PWRCTL 0x00000000 +#define DDRCTL_RANKCTL 0x00000000 +#define DDRCTL_ODTCFG 0x0600060C +#define DDRCTL_ODTMAP 0x00000001 +#define DDRPHY_PGCR0 0x07001E00 +#define DDRPHY_PGCR1 0x020046C0 +#define DDRPHY_PGCR2 0x00F0BFE0 +#define DDRPHY_PGCR3 0x55AA0080 +#define DDRPHY_PGCR6 0x00013001 +#define DDRPHY_PTR2 0x00083DEF +#define DDRPHY_PTR3 0x00061A80 +#define DDRPHY_PTR4 0x00000120 +#define DDRPHY_PTR5 0x00027100 +#define DDRPHY_PTR6 0x04000320 +#define DDRPHY_PLLCR0 0x021c4000 +#define DDRPHY_DXCCR 0x00000038 +#define DDRPHY_DSGCR 0x02A0C129 +#define DDRPHY_DCR 0x0000040C +#define DDRPHY_DTPR0 0x041A0B06 +#define DDRPHY_DTPR1 0x28140000 +#define DDRPHY_DTPR2 0x0034E300 +#define DDRPHY_DTPR3 0x02800800 +#define DDRPHY_DTPR4 0x31180805 +#define DDRPHY_DTPR5 0x00250B06 +#define DDRPHY_DTPR6 0x00000505 +#define DDRPHY_ZQCR 0x008A2A58 +#define DDRPHY_ZQ0PR0 0x000077DD +#define DDRPHY_ZQ1PR0 0x000077DD +#define DDRPHY_MR0 0x00000214 +#define DDRPHY_MR1 0x00000501 +#define DDRPHY_MR2 0x00000000 +#define DDRPHY_MR3 0x00000020 +#define DDRPHY_MR4 0x00000000 +#define DDRPHY_MR5 0x00000480 +#define DDRPHY_MR6 0x000004E8 +#define DDRPHY_MR11 0x00000000 +#define DDRPHY_MR12 0x00000000 +#define DDRPHY_MR13 0x00000000 +#define DDRPHY_MR14 0x00000000 +#define DDRPHY_MR22 0x00000000 +#define DDRPHY_VTCR0 0xF3C32028 +#define DDRPHY_DX8SL0PLLCR0 0x021c4000 +#define DDRPHY_DX8SL1PLLCR0 0x021c4000 +#define DDRPHY_DX8SL2PLLCR0 0x021c4000 +#define DDRPHY_DTCR0 0x8000B1C7 +#define DDRPHY_DTCR1 0x00010236 +#define DDRPHY_ACIOCR5 0x04800000 +#define DDRPHY_IOVCR0 0x0F0C0C0C +#define DDRPHY_DX0GCR0 0x00000000 +#define DDRPHY_DX0GCR1 0x00000000 +#define DDRPHY_DX0GCR2 0x00000000 +#define DDRPHY_DX0GCR3 0x00000000 +#define DDRPHY_DX1GCR0 0x00000000 +#define DDRPHY_DX1GCR1 0x00000000 +#define DDRPHY_DX1GCR2 0x00000000 +#define DDRPHY_DX1GCR3 0x00000000 +#define DDRPHY_DX2GCR0 0x40700204 +#define DDRPHY_DX2GCR1 0x00007FFF +#define DDRPHY_DX2GCR2 0x00000000 +#define DDRPHY_DX2GCR3 0xFFC0010B +#define DDRPHY_DX3GCR0 0x40700204 +#define DDRPHY_DX3GCR1 0x00007FFF +#define DDRPHY_DX3GCR2 0x00000000 +#define DDRPHY_DX3GCR3 0xFFC0010B +#define DDRPHY_DX4GCR0 0x40703220 +#define DDRPHY_DX4GCR1 0x55556000 +#define DDRPHY_DX4GCR2 0xAAAA0000 +#define DDRPHY_DX4GCR3 0xFFE18587 +#define DDRPHY_DX0GCR4 0x0E00B03C +#define DDRPHY_DX1GCR4 0x0E00B03C +#define DDRPHY_DX2GCR4 0x0E00B03C +#define DDRPHY_DX3GCR4 0x0E00B03C +#define DDRPHY_DX4GCR4 0x0E00B03C +#define DDRPHY_PGCR5 0x01010004 +#define DDRPHY_DX0GCR5 0x00000049 +#define DDRPHY_DX1GCR5 0x00000049 +#define DDRPHY_DX2GCR5 0x00000049 +#define DDRPHY_DX3GCR5 0x00000049 +#define DDRPHY_DX4GCR5 0x00000049 +#define DDRPHY_DX0GTR0 0x00020002 +#define DDRPHY_DX1GTR0 0x00020002 +#define DDRPHY_DX2GTR0 0x00020002 +#define DDRPHY_DX3GTR0 0x00020002 +#define DDRPHY_DX4GTR0 0x00020002 +#define DDRPHY_ODTCR 0x00010000 +#define DDRPHY_DX8SL0IOCR 0x04800000 +#define DDRPHY_DX8SL1IOCR 0x04800000 +#define DDRPHY_DX8SL2IOCR 0x04800000 +#define DDRPHY_DX8SL0DXCTL2 0x00141830 +#define DDRPHY_DX8SL1DXCTL2 0x00141830 +#define DDRPHY_DX8SL2DXCTL2 0x00141830 diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index d4ecb3be10..143eb6d630 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -17,56 +17,10 @@ &cbass_main{ u-boot,dm-spl; - secure_proxy: secure_proxy@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x32c00000 0x100000>, - <0x32400000 0x100000>, - <0x32800000 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - }; - - dmsc: dmsc { - compatible = "ti,k2g-sci"; - ti,host-id = <12>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - /* - * In case of rare platforms that does not use am6 as - * system master, use /delete-property/ - */ - ti,system-reboot-controller; - mbox-names = "rx", "tx"; - - mboxes= <&secure_proxy 11>, - <&secure_proxy 13>; - - k3_pds: power-controller { - compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; - }; - - k3_clks: clocks { - compatible = "ti,k2g-sci-clk"; - #clock-cells = <2>; - }; - - k3_reset: reset-controller { - compatible = "ti,sci-reset"; - #reset-cells = <2>; - }; - - k3_sysreset: sysreset-controller { - compatible = "ti,sci-sysreset"; - }; - }; main_pmx0: pinmux@11c000 { compatible = "pinctrl-single"; - reg = <0x11c000 0x2e4>; + reg = <0x0 0x11c000 0x0 0x2e4>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; @@ -74,28 +28,16 @@ main_pmx1: pinmux@11c2e8 { compatible = "pinctrl-single"; - reg = <0x11c2e8 0x24>; + reg = <0x0 0x11c2e8 0x0 0x24>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; - main_uart0: serial@2800000 { - compatible = "ti,am654-uart", "ti,omap4-uart", "ns16550a"; - reg = <0x02800000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; - current-speed = <115200>; - status = "disabled"; - u-boot,dm-pre-reloc; - }; - sdhci0: sdhci@04F80000 { compatible = "arasan,sdhci-5.1"; - reg = <0x4F80000 0x1000>, - <0x4F90000 0x400>; + reg = <0x0 0x4F80000 0x0 0x1000>, + <0x0 0x4F90000 0x0 0x400>; clocks = <&k3_clks 47 1>; power-domains = <&k3_pds 47>; max-frequency = <25000000>; @@ -103,8 +45,8 @@ sdhci1: sdhci@04FA0000 { compatible = "arasan,sdhci-5.1"; - reg = <0x4FA0000 0x1000>, - <0x4FB0000 0x400>; + reg = <0x0 0x4FA0000 0x0 0x1000>, + <0x0 0x4FB0000 0x0 0x400>; clocks = <&k3_clks 48 1>; power-domains = <&k3_pds 48>; max-frequency = <25000000>; @@ -112,12 +54,31 @@ }; -&secure_proxy { +&cbass_mcu { + u-boot,dm-spl; + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + reg = <0x0 0x4301c000 0x0 0x118>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; +}; + +&cbass_wakeup { + u-boot,dm-spl; +}; + +&secure_proxy_main { u-boot,dm-spl; }; &dmsc { u-boot,dm-spl; + k3_sysreset: sysreset-controller { + compatible = "ti,sci-sysreset"; + u-boot,dm-spl; + }; }; &k3_pds { @@ -141,6 +102,7 @@ AM65X_IOPAD(0x01ec, PIN_INPUT | MUX_MODE0) /* (AG11) UART0_CTSn */ AM65X_IOPAD(0x01f0, PIN_OUTPUT | MUX_MODE0) /* (AD11) UART0_RTSn */ >; + u-boot,dm-spl; }; main_mmc0_pins_default: main_mmc0_pins_default { @@ -157,6 +119,7 @@ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP | MUX_MODE0) /* (D25) MMC0_DAT7 */ AM65X_IOPAD(0x01b0, PIN_INPUT | MUX_MODE0) /* (C25) MMC0_DS */ >; + u-boot,dm-spl; }; main_mmc1_pins_default: main_mmc1_pins_default { @@ -170,6 +133,7 @@ AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP | MUX_MODE0) /* (B24) MMC1_SDCD */ AM65X_IOPAD(0x02e0, PIN_INPUT | MUX_MODE0) /* (C24) MMC1_SDWP */ >; + u-boot,dm-spl; }; }; diff --git a/arch/arm/dts/k3-am654-ddr.dtsi b/arch/arm/dts/k3-am654-ddr.dtsi new file mode 100644 index 0000000000..964eb173eb --- /dev/null +++ b/arch/arm/dts/k3-am654-ddr.dtsi @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/ { + memorycontroller: memorycontroller@0298e000 { + compatible = "ti,am654-ddrss"; + reg = <0x0 0x0298e000 0x0 0x200>, + <0x0 0x02980000 0x0 0x4000>, + <0x0 0x02988000 0x0 0x2000>; + reg-names = "ss", "ctl", "phy"; + clocks = <&k3_clks 20 0>; + power-domains = <&k3_pds 20>, + <&k3_pds 244>; + assigned-clocks = <&k3_clks 20 1>; + assigned-clock-rates = <DDR_PLL_FREQUENCY>; + u-boot,dm-spl; + + ti,ctl-reg = < + DDRCTL_DFIMISC + DDRCTL_DFITMG0 + DDRCTL_DFITMG1 + DDRCTL_DFITMG2 + DDRCTL_INIT0 + DDRCTL_INIT1 + DDRCTL_INIT3 + DDRCTL_INIT4 + DDRCTL_INIT5 + DDRCTL_INIT6 + DDRCTL_INIT7 + DDRCTL_MSTR + DDRCTL_ODTCFG + DDRCTL_ODTMAP + DDRCTL_RANKCTL + DDRCTL_RFSHCTL0 + DDRCTL_RFSHTMG + DDRCTL_ZQCTL0 + DDRCTL_ZQCTL1 + >; + + ti,ctl-crc = < + DDRCTL_CRCPARCTL0 + DDRCTL_CRCPARCTL1 + DDRCTL_CRCPARCTL2 + >; + + ti,ctl-ecc = < + DDRCTL_ECCCFG0 + >; + + ti,ctl-map = < + DDRCTL_ADDRMAP0 + DDRCTL_ADDRMAP1 + DDRCTL_ADDRMAP2 + DDRCTL_ADDRMAP3 + DDRCTL_ADDRMAP4 + DDRCTL_ADDRMAP5 + DDRCTL_ADDRMAP6 + DDRCTL_ADDRMAP7 + DDRCTL_ADDRMAP8 + DDRCTL_ADDRMAP9 + DDRCTL_ADDRMAP10 + DDRCTL_ADDRMAP11 + DDRCTL_DQMAP0 + DDRCTL_DQMAP1 + DDRCTL_DQMAP4 + DDRCTL_DQMAP5 + >; + + ti,ctl-pwr = < + DDRCTL_PWRCTL + >; + + ti,ctl-timing = < + DDRCTL_DRAMTMG0 + DDRCTL_DRAMTMG1 + DDRCTL_DRAMTMG2 + DDRCTL_DRAMTMG3 + DDRCTL_DRAMTMG4 + DDRCTL_DRAMTMG5 + DDRCTL_DRAMTMG6 + DDRCTL_DRAMTMG7 + DDRCTL_DRAMTMG8 + DDRCTL_DRAMTMG9 + DDRCTL_DRAMTMG11 + DDRCTL_DRAMTMG12 + DDRCTL_DRAMTMG13 + DDRCTL_DRAMTMG14 + DDRCTL_DRAMTMG15 + DDRCTL_DRAMTMG17 + >; + + ti,phy-cfg = < + DDRPHY_DCR + DDRPHY_DSGCR + DDRPHY_DX0GCR0 + DDRPHY_DX0GCR1 + DDRPHY_DX0GCR2 + DDRPHY_DX0GCR3 + DDRPHY_DX0GCR4 + DDRPHY_DX0GCR5 + DDRPHY_DX0GTR0 + DDRPHY_DX1GCR0 + DDRPHY_DX1GCR1 + DDRPHY_DX1GCR2 + DDRPHY_DX1GCR3 + DDRPHY_DX1GCR4 + DDRPHY_DX1GCR5 + DDRPHY_DX1GTR0 + DDRPHY_DX2GCR0 + DDRPHY_DX2GCR1 + DDRPHY_DX2GCR2 + DDRPHY_DX2GCR3 + DDRPHY_DX2GCR4 + DDRPHY_DX2GCR5 + DDRPHY_DX2GTR0 + DDRPHY_DX3GCR0 + DDRPHY_DX3GCR1 + DDRPHY_DX3GCR2 + DDRPHY_DX3GCR3 + DDRPHY_DX3GCR4 + DDRPHY_DX3GCR5 + DDRPHY_DX3GTR0 + DDRPHY_DX4GCR0 + DDRPHY_DX4GCR1 + DDRPHY_DX4GCR2 + DDRPHY_DX4GCR3 + DDRPHY_DX4GCR4 + DDRPHY_DX4GCR5 + DDRPHY_DX4GTR0 + DDRPHY_DX8SL0DXCTL2 + DDRPHY_DX8SL0IOCR + DDRPHY_DX8SL0PLLCR0 + DDRPHY_DX8SL1DXCTL2 + DDRPHY_DX8SL1IOCR + DDRPHY_DX8SL1PLLCR0 + DDRPHY_DX8SL2DXCTL2 + DDRPHY_DX8SL2IOCR + DDRPHY_DX8SL2PLLCR0 + DDRPHY_DXCCR + DDRPHY_ODTCR + DDRPHY_PGCR0 + DDRPHY_PGCR1 + DDRPHY_PGCR2 + DDRPHY_PGCR3 + DDRPHY_PGCR5 + DDRPHY_PGCR6 + >; + + ti,phy-ctl = < + DDRPHY_DTCR0 + DDRPHY_DTCR1 + DDRPHY_MR0 + DDRPHY_MR1 + DDRPHY_MR2 + DDRPHY_MR3 + DDRPHY_MR4 + DDRPHY_MR5 + DDRPHY_MR6 + DDRPHY_MR11 + DDRPHY_MR12 + DDRPHY_MR13 + DDRPHY_MR14 + DDRPHY_MR22 + DDRPHY_PLLCR0 + DDRPHY_VTCR0 + >; + + ti,phy-ioctl = < + DDRPHY_ACIOCR5 + DDRPHY_IOVCR0 + >; + + ti,phy-timing = < + DDRPHY_DTPR0 + DDRPHY_DTPR1 + DDRPHY_DTPR2 + DDRPHY_DTPR3 + DDRPHY_DTPR4 + DDRPHY_DTPR5 + DDRPHY_DTPR6 + DDRPHY_PTR2 + DDRPHY_PTR3 + DDRPHY_PTR4 + DDRPHY_PTR5 + DDRPHY_PTR6 + >; + + ti,phy-zq = < + DDRPHY_ZQ0PR0 + DDRPHY_ZQ1PR0 + DDRPHY_ZQCR + >; + }; +}; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts new file mode 100644 index 0000000000..081a2eceb2 --- /dev/null +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am654.dtsi" +#include "k3-am654-base-board-u-boot.dtsi" +#include "k3-am654-base-board-ddr4-1600MHz.dtsi" +#include "k3-am654-ddr.dtsi" + +/ { + compatible = "ti,am654-evm", "ti,am654"; + model = "Texas Instruments AM654 R5 Base Board"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + }; + + chosen { + stdout-path = "serial2:115200n8"; + tick-timer = &timer1; + }; + + aliases { + remoteproc0 = &sysctrler; + remoteproc1 = &a53_0; + }; + + a53_0: a53@0 { + compatible = "ti,am654-rproc"; + reg = <0x0 0x00a90000 0x0 0x10>; + power-domains = <&k3_pds 61>, + <&k3_pds 202>; + resets = <&k3_reset 202 0>; + assigned-clocks = <&k3_clks 202 0>; + assigned-clock-rates = <800000000>; + ti,sci = <&dmsc>; + ti,sci-proc-id = <32>; + ti,sci-host-id = <10>; + u-boot,dm-spl; + }; + + vtt_supply: vtt_supply { + compatible = "regulator-gpio"; + regulator-name = "vtt"; + regulator-min-microvolt = <0>; + regulator-max-microvolt = <3300000>; + gpios = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; + states = <0 0x0 3300000 0x1>; + u-boot,dm-spl; + }; +}; + +&cbass_main { + timer1: timer@40400000 { + compatible = "ti,omap5430-timer"; + reg = <0x0 0x40400000 0x0 0x80>; + ti,timer-alwon; + clock-frequency = <25000000>; + u-boot,dm-pre-reloc; + }; +}; + +&cbass_mcu { + mcu_secproxy: secproxy@28380000 { + compatible = "ti,am654-secure-proxy"; + reg = <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>, + <0x0 0x2a480000 0x0 0x80000>; + reg-names = "rt", "scfg", "target_data"; + #mbox-cells = <1>; + u-boot,dm-spl; + }; +}; + +&cbass_wakeup { + sysctrler: sysctrler { + compatible = "ti,am654-system-controller"; + mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>; + mbox-names = "tx", "rx"; + u-boot,dm-spl; + }; + + wkup_gpio0: wkup_gpio0@42110000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; + u-boot,dm-spl; + }; + +}; + +&dmsc { + mboxes= <&mcu_secproxy 7>, <&mcu_secproxy 6>, <&mcu_secproxy 5>; + mbox-names = "tx", "rx", "notify"; + ti,host-id = <4>; + ti,secure-host; +}; + +&wkup_uart0 { + u-boot,dm-spl; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "okay"; +}; + +&wkup_pmx0 { + u-boot,dm-spl; + wkup_uart0_pins_default: wkup_uart0_pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT | MUX_MODE0) /* (AB1) WKUP_UART0_RXD */ + AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT | MUX_MODE0) /* (AB5) WKUP_UART0_TXD */ + AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT | MUX_MODE1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT | MUX_MODE1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + >; + u-boot,dm-spl; + }; + + wkup_vtt_pins_default: wkup_vtt_pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP | MUX_MODE7) /* WKUP_GPIO0_28 */ + >; + u-boot,dm-spl; + }; +}; + +&memorycontroller { + vtt-supply = <&vtt_supply>; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_vtt_pins_default>; +}; diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h index d5a7a8bb61..bb33b4bc89 100644 --- a/arch/arm/include/asm/macro.h +++ b/arch/arm/include/asm/macro.h @@ -193,6 +193,10 @@ lr .req x30 SCR_EL3_SMD_DIS | SCR_EL3_RES1 |\ SCR_EL3_NS_EN) #endif + +#ifdef CONFIG_ARMV8_EA_EL3_FIRST + orr \tmp, \tmp, #SCR_EL3_EA_EN +#endif msr scr_el3, \tmp /* Return to the EL2_SP2 mode from EL3 */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index c1f87f9caf..aed2e3c51e 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -29,6 +29,7 @@ #define SCR_EL3_HCE_EN (1 << 8) /* Hypervisor Call enable */ #define SCR_EL3_SMD_DIS (1 << 7) /* Secure Monitor Call disable */ #define SCR_EL3_RES1 (3 << 4) /* Reserved, RES1 */ +#define SCR_EL3_EA_EN (1 << 3) /* External aborts taken to EL3 */ #define SCR_EL3_NS_EN (1 << 0) /* EL0 and EL1 in Non-scure state */ /* diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 0ca61210da..f7fb77235c 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -59,7 +59,7 @@ #endif ENTRY(memcpy) cmp r0, r1 - moveq pc, lr + bxeq lr enter r4, lr @@ -147,7 +147,8 @@ ENTRY(memcpy) str1b r0, r4, cs, abort=21f str1b r0, ip, cs, abort=21f - exit r4, pc + exit r4, lr + bx lr 9: rsb ip, ip, #4 cmp ip, #2 @@ -256,7 +257,8 @@ ENTRY(memcpy) .endm .macro copy_abort_end - ldmfd sp!, {r4, pc} + ldmfd sp!, {r4, lr} + bx lr .endm ENDPROC(memcpy) diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h index 99b0cc812d..cd2272367b 100644 --- a/arch/arm/mach-at91/include/mach/at91_wdt.h +++ b/arch/arm/mach-at91/include/mach/at91_wdt.h @@ -4,7 +4,7 @@ * * Copyright (C) 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2018 Microchip Technology Inc. * * Watchdog Timer (WDT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. @@ -27,9 +27,13 @@ typedef struct at91_wdt { #endif +/* Watchdog Control Register */ +#define AT91_WDT_CR 0x00 #define AT91_WDT_CR_WDRSTT 1 #define AT91_WDT_CR_KEY 0xa5000000 /* KEY Password */ +/* Watchdog Mode Register*/ +#define AT91_WDT_MR 0X04 #define AT91_WDT_MR_WDV(x) (x & 0xfff) #define AT91_WDT_MR_WDFIEN 0x00001000 #define AT91_WDT_MR_WDRSTEN 0x00002000 diff --git a/arch/arm/mach-at91/spl.c b/arch/arm/mach-at91/spl.c index 8bfb2a452b..6da6d41be2 100644 --- a/arch/arm/mach-at91/spl.c +++ b/arch/arm/mach-at91/spl.c @@ -11,7 +11,7 @@ #include <asm/arch/clk.h> #include <spl.h> -#if !defined(CONFIG_AT91SAM9_WATCHDOG) +#if !defined(CONFIG_WDT_AT91) void at91_disable_wdt(void) { struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT; diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c index 8c368042a6..23ebaa99b1 100644 --- a/arch/arm/mach-at91/spl_at91.c +++ b/arch/arm/mach-at91/spl_at91.c @@ -76,7 +76,7 @@ void __weak spl_board_init(void) void board_init_f(ulong dummy) { lowlevel_clock_init(); -#if !defined(CONFIG_AT91SAM9_WATCHDOG) +#if !defined(CONFIG_WDT_AT91) at91_disable_wdt(); #endif diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c index 597ff8c036..ef745c9477 100644 --- a/arch/arm/mach-at91/spl_atmel.c +++ b/arch/arm/mach-at91/spl_atmel.c @@ -98,7 +98,7 @@ void board_init_f(ulong dummy) configure_2nd_sram_as_l2_cache(); #endif -#if !defined(CONFIG_AT91SAM9_WATCHDOG) +#if !defined(CONFIG_WDT_AT91) /* disable watchdog */ at91_disable_wdt(); #endif diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 2df6197af7..e677a2e01b 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -47,5 +47,23 @@ config SYS_K3_BOOT_PARAM_TABLE_INDEX Address at which ROM stores the value which determines if SPL is booted up by primary boot media or secondary boot media. +config SYS_K3_KEY + string "Key used to generate x509 certificate" + help + This option enables to provide a custom key that can be used for + generating x509 certificate for spl binary. If not needed leave + it blank so that a random key is generated and used. + +config SYS_K3_BOOT_CORE_ID + int + default 16 + +config SYS_K3_SPL_ATF + bool "Start Cortex-A from SPL" + depends on SPL && CPU_V7R + help + Enabling this will try to start Cortex-A (typically with ATF) + after SPL from R5. + source "board/ti/am65x/Kconfig" endif diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile index e9b7ee5210..406dda3b02 100644 --- a/arch/arm/mach-k3/Makefile +++ b/arch/arm/mach-k3/Makefile @@ -5,3 +5,5 @@ obj-$(CONFIG_SOC_K3_AM6) += am6_init.o obj-$(CONFIG_ARM64) += arm64-mmu.o +obj-$(CONFIG_CPU_V7R) += r5_mpu.o +obj-y += common.o diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index 68f0b8c011..e2fe00c422 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -10,6 +10,8 @@ #include <asm/io.h> #include <spl.h> #include <asm/arch/hardware.h> +#include "common.h" +#include <dm.h> #ifdef CONFIG_SPL_BUILD static void mmr_unlock(u32 base, u32 partition) @@ -56,6 +58,10 @@ static void store_boot_index_from_rom(void) void board_init_f(ulong dummy) { +#if defined(CONFIG_K3_AM654_DDRSS) + struct udevice *dev; + int ret; +#endif /* * Cannot delay this further as there is a chance that * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section. @@ -65,11 +71,23 @@ void board_init_f(ulong dummy) /* Make all control module registers accessible */ ctrl_mmr_unlock(); +#ifdef CONFIG_CPU_V7R + setup_k3_mpu_regions(); +#endif + /* Init DM early in-order to invoke system controller */ spl_early_init(); /* Prepare console output */ preloader_console_init(); + +#ifdef CONFIG_K3_AM654_DDRSS + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + printf("DRAM init failed: %d\n", ret); + return; + } +#endif } u32 spl_boot_mode(const u32 boot_device) diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c new file mode 100644 index 0000000000..cc89d4a296 --- /dev/null +++ b/arch/arm/mach-k3/common.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * K3: Common Architecture initialization + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla <lokeshvutla@ti.com> + */ + +#include <common.h> +#include <spl.h> +#include "common.h" +#include <dm.h> +#include <remoteproc.h> + +#ifdef CONFIG_SYS_K3_SPL_ATF +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) +{ + int ret; + + /* + * It is assumed that remoteproc device 1 is the corresponding + * cortex A core which runs ATF. Make sure DT reflects the same. + */ + ret = rproc_dev_init(1); + if (ret) { + printf("%s: ATF failed to Initialize on rproc: ret= %d\n", + __func__, ret); + hang(); + } + + ret = rproc_load(1, spl_image->entry_point, 0x200); + if (ret) { + printf("%s: ATF failed to load on rproc: ret= %d\n", + __func__, ret); + hang(); + } + + /* Add an extra newline to differentiate the ATF logs from SPL*/ + printf("Starting ATF on ARM64 core...\n\n"); + + ret = rproc_start(1); + if (ret) { + printf("%s: ATF failed to start on rproc: ret= %d\n", + __func__, ret); + hang(); + } + + debug("ATF started. Wait indefiniely\n"); + while (1) + asm volatile("wfe"); +} +#endif diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h new file mode 100644 index 0000000000..ac7e80d9af --- /dev/null +++ b/arch/arm/mach-k3/common.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * K3: Architecture common definitions + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla <lokeshvutla@ti.com> + */ + +#include <asm/armv7_mpu.h> + +void setup_k3_mpu_regions(void); diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk index 9b86ddc715..7fc0b3f357 100644 --- a/arch/arm/mach-k3/config.mk +++ b/arch/arm/mach-k3/config.mk @@ -5,6 +5,65 @@ ifdef CONFIG_SPL_BUILD +# Openssl is required to generate x509 certificate. +# Error out if openssl is not available. +ifeq ($(shell which openssl),) +$(error "No openssl in $(PATH), consider installing openssl") +endif + +SHA_VALUE= $(shell openssl dgst -sha512 -hex $(obj)/u-boot-spl.bin | sed -e "s/^.*= //g") +IMAGE_SIZE= $(shell cat $(obj)/u-boot-spl.bin | wc -c) +LOADADDR= $(shell echo $(CONFIG_SPL_TEXT_BASE) | sed -e "s/^0x//g") +MAX_SIZE= $(shell printf "%d" $(CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE)) + +# Parameters to get populated into the x509 template +SED_OPTS= -e s/TEST_IMAGE_LENGTH/$(IMAGE_SIZE)/ +SED_OPTS+= -e s/TEST_IMAGE_SHA_VAL/$(SHA_VALUE)/ +SED_OPTS+= -e s/TEST_CERT_TYPE/1/ # CERT_TYPE_PRIMARY_IMAGE_BIN +SED_OPTS+= -e s/TEST_BOOT_CORE/$(CONFIG_SYS_K3_BOOT_CORE_ID)/ +SED_OPTS+= -e s/TEST_BOOT_ARCH_WIDTH/32/ +SED_OPTS+= -e s/TEST_BOOT_ADDR/$(LOADADDR)/ + +# Command to generate ecparam key +quiet_cmd_genkey = OPENSSL $@ +cmd_genkey = openssl ecparam -out $@ -name prime256v1 -genkey + +# Command to generate x509 certificate +quiet_cmd_gencert = OPENSSL $@ +cmd_gencert = cat $(srctree)/tools/k3_x509template.txt | sed $(SED_OPTS) > u-boot-spl-x509.txt; \ + openssl req -new -x509 -key $(KEY) -nodes -outform DER -out $@ -config u-boot-spl-x509.txt -sha512 + +# If external key is not provided, generate key using openssl. +ifeq ($(CONFIG_SYS_K3_KEY), "") +KEY=u-boot-spl-eckey.pem +else +KEY=$(patsubst "%",%,$(CONFIG_SYS_K3_KEY)) +endif + +u-boot-spl-eckey.pem: FORCE + $(call if_changed,genkey) + +# tiboot3.bin is mandated by ROM and ROM only supports R5 boot. +# So restrict tiboot3.bin creation for CPU_V7R. +ifdef CONFIG_CPU_V7R +u-boot-spl-cert.bin: $(KEY) $(obj)/u-boot-spl.bin image_check FORCE + $(call if_changed,gencert) + +image_check: $(obj)/u-boot-spl.bin FORCE + @if [ $(IMAGE_SIZE) -gt $(MAX_SIZE) ]; then \ + echo "===============================================" >&2; \ + echo "ERROR: Final Image too big. " >&2; \ + echo "$< size = $(IMAGE_SIZE), max size = $(MAX_SIZE)" >&2; \ + echo "===============================================" >&2; \ + exit 1; \ + fi + +tiboot3.bin: u-boot-spl-cert.bin $(obj)/u-boot-spl.bin FORCE + $(call if_changed,cat) + +ALL-y += tiboot3.bin +endif + ifdef CONFIG_ARM64 SPL_ITS := u-boot-spl-k3.its $(SPL_ITS): FORCE diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h new file mode 100644 index 0000000000..0b2007981a --- /dev/null +++ b/arch/arm/mach-k3/include/mach/sys_proto.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Andreas Dannenberg <dannenberg@ti.com> + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +void sdelay(unsigned long loops); +u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, + u32 bound); + +#endif diff --git a/arch/arm/mach-k3/r5_mpu.c b/arch/arm/mach-k3/r5_mpu.c new file mode 100644 index 0000000000..ee076ed877 --- /dev/null +++ b/arch/arm/mach-k3/r5_mpu.c @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * K3: R5 MPU region definitions + * + * Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla <lokeshvutla@ti.com> + */ + +#include <common.h> +#include <asm/io.h> +#include <linux/kernel.h> +#include "common.h" + +struct mpu_region_config k3_mpu_regions[16] = { + /* + * Make all 4GB as Device Memory and not executable. We are overriding + * it with next region for any requirement. + */ + {0x00000000, REGION_0, XN_EN, PRIV_RW_USR_RW, SHARED_WRITE_BUFFERED, + REGION_4GB}, + + /* SPL code area marking it as WB and Write allocate. */ + {CONFIG_SPL_TEXT_BASE, REGION_1, XN_DIS, PRIV_RW_USR_RW, + O_I_WB_RD_WR_ALLOC, REGION_8MB}, + + /* U-Boot's code area marking it as WB and Write allocate */ + {CONFIG_SYS_SDRAM_BASE, REGION_2, XN_DIS, PRIV_RW_USR_RW, + O_I_WB_RD_WR_ALLOC, REGION_2GB}, + {0x0, 3, 0x0, 0x0, 0x0, 0x0}, + {0x0, 4, 0x0, 0x0, 0x0, 0x0}, + {0x0, 5, 0x0, 0x0, 0x0, 0x0}, + {0x0, 6, 0x0, 0x0, 0x0, 0x0}, + {0x0, 7, 0x0, 0x0, 0x0, 0x0}, + {0x0, 8, 0x0, 0x0, 0x0, 0x0}, + {0x0, 9, 0x0, 0x0, 0x0, 0x0}, + {0x0, 10, 0x0, 0x0, 0x0, 0x0}, + {0x0, 11, 0x0, 0x0, 0x0, 0x0}, + {0x0, 12, 0x0, 0x0, 0x0, 0x0}, + {0x0, 13, 0x0, 0x0, 0x0, 0x0}, + {0x0, 14, 0x0, 0x0, 0x0, 0x0}, + {0x0, 15, 0x0, 0x0, 0x0, 0x0}, +}; + +void setup_k3_mpu_regions(void) +{ + setup_mpu_regions(k3_mpu_regions, ARRAY_SIZE(k3_mpu_regions)); +} diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 024aa7c512..2c6b422312 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -727,6 +727,10 @@ sandbox_virtio2 { compatible = "sandbox,virtio2"; }; + + pinctrl { + compatible = "sandbox,pinctrl"; + }; }; #include "sandbox_pmic.dtsi" diff --git a/board/broadcom/bcm968580xref/Kconfig b/board/broadcom/bcm968580xref/Kconfig new file mode 100644 index 0000000000..b5730367a2 --- /dev/null +++ b/board/broadcom/bcm968580xref/Kconfig @@ -0,0 +1,17 @@ +if ARCH_BCM6858 + +config SYS_VENDOR + default "broadcom" + +config SYS_BOARD + default "bcm968580xref" + +config SYS_CONFIG_NAME + default "broadcom_bcm968580xref" + +endif + +config TARGET_BCM968580XREF + bool "Support Broadcom bcm968580xref" + depends on ARCH_BCM6858 + select ARM64 diff --git a/board/broadcom/bcm968580xref/MAINTAINERS b/board/broadcom/bcm968580xref/MAINTAINERS new file mode 100644 index 0000000000..1ecdfbc0bb --- /dev/null +++ b/board/broadcom/bcm968580xref/MAINTAINERS @@ -0,0 +1,6 @@ +BROADCOM BCM968580XREF +M: Philippe Reynes <philippe.reynes@softathome.com> +S: Maintained +F: board/broadcom/bcm968580xref/ +F: include/configs/broadcom_bcm968580xref.h +F: configs/bcm968580_ram_defconfig diff --git a/board/broadcom/bcm968580xref/Makefile b/board/broadcom/bcm968580xref/Makefile new file mode 100644 index 0000000000..5cd393b196 --- /dev/null +++ b/board/broadcom/bcm968580xref/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += bcm968580xref.o diff --git a/board/broadcom/bcm968580xref/bcm968580xref.c b/board/broadcom/bcm968580xref/bcm968580xref.c new file mode 100644 index 0000000000..2e547f5170 --- /dev/null +++ b/board/broadcom/bcm968580xref/bcm968580xref.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> + */ + +#include <common.h> +#include <fdtdec.h> +#include <linux/io.h> + +#ifdef CONFIG_ARM64 +#include <asm/armv8/mmu.h> + +static struct mm_region broadcom_bcm968580xref_mem_map[] = { + { + /* RAM */ + .virt = 0x00000000UL, + .phys = 0x00000000UL, + .size = 8UL * SZ_1G, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + /* SoC */ + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = 0xff80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = broadcom_bcm968580xref_mem_map; +#endif + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + if (fdtdec_setup_mem_size_base() != 0) + printf("fdtdec_setup_mem_size_base() has failed\n"); + + return 0; +} + +int dram_init_banksize(void) +{ + fdtdec_setup_memory_banksize(); + + return 0; +} + +int print_cpuinfo(void) +{ + return 0; +} diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 478e37285f..9b6e0c4c21 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -380,10 +380,16 @@ M: Hauke Mehrtens <hauke@hauke-m.de> S: Maintained F: configs/orangepi_r1_defconfig +PINEBOOK BOARD: +M: Vasily Khoruzhick <anarsoul@gmail.com> +S: Maintained +F: configs/pinebook_defconfig + PINE64 BOARDS M: Andre Przywara <andre.przywara@arm.com> S: Maintained F: configs/pine64_plus_defconfig +F: configs/pine64-lts_defconfig PINE H64 BOARD M: Icenowy Zheng <icenowy@aosc.io> diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig index 591600483e..d4b36dbb42 100644 --- a/board/ti/am65x/Kconfig +++ b/board/ti/am65x/Kconfig @@ -12,6 +12,14 @@ config TARGET_AM654_A53_EVM select ARM64 select SOC_K3_AM6 +config TARGET_AM654_R5_EVM + bool "TI K3 based AM654 EVM running on R5" + select CPU_V7R + select SYS_THUMB_BUILD + select SOC_K3_AM6 + select K3_AM654_DDRSS + imply SYS_K3_SPL_ATF + endchoice if TARGET_AM654_A53_EVM @@ -26,3 +34,19 @@ config SYS_CONFIG_NAME default "am65x_evm" endif + +if TARGET_AM654_R5_EVM + +config SYS_BOARD + default "am65x" + +config SYS_VENDOR + default "ti" + +config SYS_CONFIG_NAME + default "am65x_evm" + +config SPL_LDSCRIPT + default "arch/arm/mach-omap2/u-boot-spl.lds" + +endif diff --git a/board/ti/am65x/MAINTAINERS b/board/ti/am65x/MAINTAINERS index ca1ce58f72..7c52e7599e 100644 --- a/board/ti/am65x/MAINTAINERS +++ b/board/ti/am65x/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/ti/am65x/ F: include/configs/am65x_evm.h F: configs/am65x_evm_a53_defconfig +F: configs/am65x_evm_r5_defconfig diff --git a/board/ti/am65x/README b/board/ti/am65x/README index e7f4ff6578..0b82bd557b 100644 --- a/board/ti/am65x/README +++ b/board/ti/am65x/README @@ -37,13 +37,13 @@ instead use Flacon boot flow to reduce boot time. | +--------+ | | | | : | | | | +--------+ | +-----------+ | | -| | *rom* |----------|-->| Reset rls | | | +| | *ROM* |----------|-->| Reset rls | | | | +--------+ | +-----------+ | | | | | | : | | -| | rom | | : | | +| | ROM | | : | | | |services| | : | | | | | | +-------------+ | | -| | | | | *R5 rom* | | | +| | | | | *R5 ROM* | | | | | | | +-------------+ | | | | |<---------|---|Load and auth| | | | | | | | tiboot3.bin | | | @@ -52,17 +52,25 @@ instead use Flacon boot flow to reduce boot time. | | | | : | | | | | | : | | | | | | +-------------+ | | -| | Start | | | *R5 SPL* | | | -| | System | | +-------------+ | | -| |Firmware|<---------|---|Load and auth| | | -| +--------+ | | sysfw bin | | | -| : | +-------------+ | | -| +---------+ | | DDR | | | -| | *SYSFW* | | | config | | | -| +---------+ | +-------------+ | | -| | |<--------|---| Load | | | -| | | | | tispl.bin | | | +| | | | | *R5 SPL* | | | +| | | | +-------------+ | | +| | | | | Load | | | +| | | | | sysfw.itb | | | +| | Start | | +-------------+ | | +| | System |<---------|---| Start | | | +| |Firmware| | | SYSFW | | | +| +--------+ | +-------------+ | | +| : | | | | | +| +---------+ | | Load | | | +| | *SYSFW* | | | system | | | +| +---------+ | | Config data | | | +| | |<--------|---| | | | +| | | | +-------------+ | | +| | | | | | | | +| | | | | DDR | | | +| | | | | config | | | | | | | +-------------+ | | +| | | | | | | | | | |<--------|---| Start A53 | | | | | | | | and Reset | | | | | | | +-------------+ | | @@ -82,7 +90,7 @@ instead use Flacon boot flow to reduce boot time. | | | | | +-----------+ | | | | | | : | | | | | | +-----------+ | -| | |<--------|-----------------------|---->| *u-boot* | | +| | |<--------|-----------------------|---->| *U-Boot* | | | | | | | +-----------+ | | | | | | | prompt | | | | | | | +-----------+ | @@ -96,9 +104,8 @@ requests DMSC to get these services done as shown in the above diagram. Sources: -------- 1. SYSFW: - System Firmware repo is closed source and the binaries are delivered - to users with NDA. Please contact TI to get the System Firmware - Binary named ti-sci-firmware-am6x.bin that runs on AM65x SoC. + Tree: git://git.ti.com/processor-firmware/system-firmware-image-gen.git + Branch: master 2. ATF: Tree: https://github.com/ARM-software/arm-trusted-firmware.git @@ -115,9 +122,7 @@ Sources: Build procedure: ---------------- 1. SYSFW: - ROM expects a signed binary that contains the X509 certificate. So -the binary ti-sci-firmware-am6x.bin cannot be uses as-is and needs to be signed. -Contact TI on the procedure to sign the system firmware binary. +$ make CROSS_COMPILE=arm-linux-gnueabihf- 2. ATF: $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed @@ -128,14 +133,79 @@ $ make PLATFORM=k3-am65x CFG_ARM64_core=y 4. U-Boot: 4.1. R5: - TBD. +$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig O=/tmp/r5 +$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5 4.2. A53: $ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53 -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a53 +$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a53 Target Images -------------- Copy the below images to an SD card and boot: +- sysfw.itb from step 1 - tiboot3.bin from step 4.1 - tispl.bin, u-boot.img from 4.2 + +Image formats: +-------------- + +- tiboot3.bin: + +-----------------------+ + | X.509 | + | Certificate | + | +-------------------+ | + | | | | + | | R5 | | + | | u-boot-spl.bin | | + | | | | + | +-------------------+ | + | | | | + | | FIT header | | + | | +---------------+ | | + | | | | | | + | | | DTB 1...N | | | + | | +---------------+ | | + | +-------------------+ | + +-----------------------+ + +- tispl.bin + +-----------------------+ + | | + | FIT HEADER | + | +-------------------+ | + | | | | + | | A53 ATF | | + | +-------------------+ | + | | | | + | | A53 OPTEE | | + | +-------------------+ | + | | | | + | | A53 SPL | | + | +-------------------+ | + | | | | + | | SPL DTB 1...N | | + | +-------------------+ | + +-----------------------+ + +- sysfw.itb + +-----------------------+ + | | + | FIT HEADER | + | +-------------------+ | + | | | | + | | sysfw.bin | | + | +-------------------+ | + | | | | + | | board config | | + | +-------------------+ | + | | | | + | | PM config | | + | +-------------------+ | + | | | | + | | RM config | | + | +-------------------+ | + | | | | + | | Secure config | | + | +-------------------+ | + +-----------------------+ diff --git a/cmd/Kconfig b/cmd/Kconfig index d609f9d1c9..e2973b3c51 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -953,6 +953,14 @@ config CMD_PCMCIA about 1990. These devices are typically removable memory or network cards using a standard 68-pin connector. +config CMD_PINMUX + bool "pinmux - show pins muxing" + default y if PINCTRL + help + Parse all available pin-controllers and show pins muxing. This + is useful for debug purpoer to check the pin muxing and to know if + a pin is configured as a GPIO or as an alternate function. + config CMD_POWEROFF bool "poweroff" help diff --git a/cmd/Makefile b/cmd/Makefile index 12a1330b06..0534ddc679 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -103,6 +103,7 @@ ifdef CONFIG_PCI obj-$(CONFIG_CMD_PCI) += pci.o endif obj-y += pcmcia.o +obj-$(CONFIG_CMD_PINMUX) += pinmux.o obj-$(CONFIG_CMD_PXE) += pxe.o obj-$(CONFIG_CMD_WOL) += wol.o obj-$(CONFIG_CMD_QFW) += qfw.o diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index 60b438766d..cbeba6ba28 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -16,7 +16,7 @@ DECLARE_GLOBAL_DATA_PTR; __maybe_unused static void print_num(const char *name, ulong value) { - printf("%-12s= 0x%08lX\n", name, value); + printf("%-12s= 0x%0*lx\n", name, 2 * (int)sizeof(value), value); } __maybe_unused @@ -348,7 +348,7 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, CONFIG_VAL(SYS_MALLOC_F_LEN)); #endif if (gd->fdt_blob) - printf("fdt_blob = %p\n", gd->fdt_blob); + print_num("fdt_blob", (ulong)gd->fdt_blob); return 0; } diff --git a/cmd/pinmux.c b/cmd/pinmux.c new file mode 100644 index 0000000000..6c8ec5164d --- /dev/null +++ b/cmd/pinmux.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <command.h> +#include <dm.h> +#include <errno.h> +#include <dm/pinctrl.h> +#include <dm/uclass-internal.h> + +#define LIMIT_DEVNAME 30 + +static struct udevice *currdev; + +static int do_dev(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + const char *name; + int ret; + + switch (argc) { + case 2: + name = argv[1]; + ret = uclass_get_device_by_name(UCLASS_PINCTRL, name, &currdev); + if (ret) { + printf("Can't get the pin-controller: %s!\n", name); + return CMD_RET_FAILURE; + } + case 1: + if (!currdev) { + printf("Pin-controller device is not set!\n"); + return CMD_RET_USAGE; + } + + printf("dev: %s\n", currdev->name); + } + + return CMD_RET_SUCCESS; +} + +static int show_pinmux(struct udevice *dev) +{ + char pin_name[PINNAME_SIZE]; + char pin_mux[PINMUX_SIZE]; + int pins_count; + int i; + int ret; + + pins_count = pinctrl_get_pins_count(dev); + + if (pins_count == -ENOSYS) { + printf("Ops get_pins_count not supported\n"); + return pins_count; + } + + for (i = 0; i < pins_count; i++) { + ret = pinctrl_get_pin_name(dev, i, pin_name, PINNAME_SIZE); + if (ret == -ENOSYS) { + printf("Ops get_pin_name not supported\n"); + return ret; + } + + ret = pinctrl_get_pin_muxing(dev, i, pin_mux, PINMUX_SIZE); + if (ret) { + printf("Ops get_pin_muxing error (%d)\n", ret); + return ret; + } + + printf("%-*s: %-*s\n", PINNAME_SIZE, pin_name, + PINMUX_SIZE, pin_mux); + } + + return 0; +} + +static int do_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *dev; + int ret = CMD_RET_USAGE; + + if (currdev && (argc < 2 || strcmp(argv[1], "-a"))) + return show_pinmux(currdev); + + if (argc < 2 || strcmp(argv[1], "-a")) + return ret; + + uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { + /* insert a separator between each pin-controller display */ + printf("--------------------------\n"); + printf("%s:\n", dev->name); + ret = show_pinmux(dev); + if (ret < 0) + printf("Can't display pin muxing for %s\n", + dev->name); + } + + return ret; +} + +static int do_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *dev; + + printf("| %-*.*s| %-*.*s| %s\n", + LIMIT_DEVNAME, LIMIT_DEVNAME, "Device", + LIMIT_DEVNAME, LIMIT_DEVNAME, "Driver", + "Parent"); + + uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { + printf("| %-*.*s| %-*.*s| %s\n", + LIMIT_DEVNAME, LIMIT_DEVNAME, dev->name, + LIMIT_DEVNAME, LIMIT_DEVNAME, dev->driver->name, + dev->parent->name); + } + + return CMD_RET_SUCCESS; +} + +static cmd_tbl_t pinmux_subcmd[] = { + U_BOOT_CMD_MKENT(dev, 2, 1, do_dev, "", ""), + U_BOOT_CMD_MKENT(list, 1, 1, do_list, "", ""), + U_BOOT_CMD_MKENT(status, 2, 1, do_status, "", ""), +}; + +static int do_pinmux(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + cmd_tbl_t *cmd; + + argc--; + argv++; + + cmd = find_cmd_tbl(argv[0], pinmux_subcmd, ARRAY_SIZE(pinmux_subcmd)); + if (!cmd || argc > cmd->maxargs) + return CMD_RET_USAGE; + + return cmd->cmd(cmdtp, flag, argc, argv); +} + +U_BOOT_CMD(pinmux, CONFIG_SYS_MAXARGS, 1, do_pinmux, + "show pin-controller muxing", + "list - list UCLASS_PINCTRL devices\n" + "pinmux dev [pincontroller-name] - select pin-controller device\n" + "pinmux status [-a] - print pin-controller muxing [for all]\n" +) diff --git a/common/board_f.c b/common/board_f.c index 96503ff8d3..f1a1432d86 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -91,7 +91,7 @@ static int init_func_watchdog_init(void) { # if defined(CONFIG_HW_WATCHDOG) && \ (defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \ - defined(CONFIG_SH) || defined(CONFIG_AT91SAM9_WATCHDOG) || \ + defined(CONFIG_SH) || \ defined(CONFIG_DESIGNWARE_WATCHDOG) || \ defined(CONFIG_IMX_WATCHDOG)) hw_watchdog_init(); diff --git a/common/image-sig.c b/common/image-sig.c index 5a269d3289..5d860e1266 100644 --- a/common/image-sig.c +++ b/common/image-sig.c @@ -334,6 +334,11 @@ int fit_config_check_sig(const void *fit, int noffset, int required_keynode, return -1; } + if (prop && prop_len > 0 && prop[prop_len - 1] != '\0') { + *err_msgp = "hashed-nodes property must be null-terminated"; + return -1; + } + /* Add a sanity check here since we are using the stack */ if (count > IMAGE_MAX_HASHED_NODES) { *err_msgp = "Number of hashed nodes exceeds maximum"; diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 882163f8c1..14805575ab 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -1,5 +1,4 @@ CONFIG_ARM=y -# CONFIG_SYS_THUMB_BUILD is not set CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TI_COMMON_CMD_OPTIONS=y @@ -34,9 +33,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1920k(u-boot),256k(u-boot-env),8m(kernel),512k(dtb),-(rootfs)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="am3517-evm" -CONFIG_SPL_OF_PLATDATA=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y CONFIG_DM_PCA953X=y diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig new file mode 100644 index 0000000000..237b9e8229 --- /dev/null +++ b/configs/am65x_evm_r5_defconfig @@ -0,0 +1,87 @@ +CONFIG_ARM=y +CONFIG_ARCH_K3=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SOC_K3_AM6=y +CONFIG_TARGET_AM654_R5_EVM=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_FAT_SUPPORT=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_LOAD_FIT=y +CONFIG_USE_BOOTCOMMAND=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_DM_MAILBOX=y +CONFIG_SPL_DM_RESET=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_POWER_DOMAIN=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_REMOTEPROC=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_REMOTEPROC=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board" +CONFIG_SPL_MULTI_DTB_FIT=y +CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_INTERFACE="mmc" +CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_OF_TRANSLATE=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_CLK_TI_SCI=y +CONFIG_TI_SCI_PROTOCOL=y +CONFIG_DM_GPIO=y +CONFIG_DA8XX_GPIO=y +CONFIG_DM_MAILBOX=y +CONFIG_K3_SEC_PROXY=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_K3_ARASAN=y +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_GENERIC is not set +CONFIG_SPL_PINCTRL=y +# CONFIG_SPL_PINCTRL_GENERIC is not set +CONFIG_PINCTRL_SINGLE=y +CONFIG_POWER_DOMAIN=y +CONFIG_TI_SCI_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_K3_SYSTEM_CONTROLLER=y +CONFIG_REMOTEPROC_K3=y +CONFIG_DM_RESET=y +CONFIG_RESET_TI_SCI=y +CONFIG_DM_SERIAL=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_TI_SCI=y +CONFIG_TIMER=y +CONFIG_SPL_TIMER=y +CONFIG_OMAP_TIMER=y diff --git a/configs/bcm968580_ram_defconfig b/configs/bcm968580_ram_defconfig new file mode 100644 index 0000000000..abe90ee75f --- /dev/null +++ b/configs/bcm968580_ram_defconfig @@ -0,0 +1,36 @@ +CONFIG_ARM=y +CONFIG_ARCH_BCM6858=y +CONFIG_SYS_TEXT_BASE=0x10000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 +CONFIG_TARGET_BCM968580XREF=y +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400 +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_IMAGE_FORMAT_LEGACY=y +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_DOS_PARTITION=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="bcm968580xref" +# CONFIG_NET is not set +CONFIG_BLK=y +CONFIG_CLK=y +CONFIG_FIRMWARE=y +# CONFIG_MMC is not set +CONFIG_SPECIFY_CONSOLE_INDEX=y +# CONFIG_SPL_SERIAL_PRESENT is not set +CONFIG_CONS_INDEX=0 +CONFIG_DM_SERIAL=y +CONFIG_SERIAL_SEARCH_ALL=y +CONFIG_BCM6858_SERIAL=y +CONFIG_SYSRESET=y +CONFIG_REGEX=y +# CONFIG_GENERATE_SMBIOS_TABLE is not set diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 9167a9450d..2e59686291 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MVEBU=y CONFIG_SYS_TEXT_BASE=0x00800000 CONFIG_SPL_GPIO_SUPPORT=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index b1e7c35fa9..a1af2f1342 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_THUMB_BUILD=y # CONFIG_SPL_USE_ARCH_MEMCPY is not set # CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_AT91=y diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index a23f6a33d6..80219eeacf 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TI_COMMON_CMD_OPTIONS=y # CONFIG_SPL_GPIO_SUPPORT is not set CONFIG_SYS_MALLOC_F_LEN=0x2000 @@ -29,9 +30,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit" -CONFIG_SPL_OF_PLATDATA=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index f28ca5bcbf..8a8c7147c3 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TI_COMMON_CMD_OPTIONS=y # CONFIG_SPL_GPIO_SUPPORT is not set CONFIG_SYS_MALLOC_F_LEN=0x2000 @@ -29,9 +30,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-35xx-devkit" -CONFIG_SPL_OF_PLATDATA=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 45e5b504f7..969387a37c 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TI_COMMON_CMD_OPTIONS=y # CONFIG_SPL_GPIO_SUPPORT is not set CONFIG_SYS_MALLOC_F_LEN=0x2000 @@ -29,9 +30,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit" -CONFIG_SPL_OF_PLATDATA=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index e733584ebe..396543e56b 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y +CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TI_COMMON_CMD_OPTIONS=y # CONFIG_SPL_GPIO_SUPPORT is not set CONFIG_SYS_MALLOC_F_LEN=0x2000 @@ -28,9 +29,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0,nor0=physmap-flash.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs);physmap-flash.0:-(nor)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-37xx-devkit" -CONFIG_SPL_OF_PLATDATA=y # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y CONFIG_SPL_DM=y diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig index 0b6234fbd9..699e2e230a 100644 --- a/configs/picosam9g45_defconfig +++ b/configs/picosam9g45_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_AT91=y CONFIG_SYS_TEXT_BASE=0x23f00000 CONFIG_TARGET_PICOSAM9G45=y @@ -39,3 +40,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LCD=y CONFIG_OF_LIBFDT=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_WDT=y +CONFIG_WDT_AT91=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index cf6f2757ca..e9c2b63509 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -59,3 +59,6 @@ CONFIG_USB_ETHER_ASIX=y CONFIG_USB_ETHER_MCS7830=y CONFIG_SPL_TINY_MEMSET=y # CONFIG_EFI_LOADER is not set +CONFIG_WDT=y +CONFIG_WDT_AT91=y +CONFIG_AT91_HW_WDT_TIMEOUT=y diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index ee5da43ccb..e53e075d48 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -61,3 +61,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0908 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_USE_TINY_PRINTF=y +CONFIG_WDT=y +CONFIG_WDT_AT91=y +CONFIG_AT91_HW_WDT_TIMEOUT=y diff --git a/configs/wb45n_defconfig b/configs/wb45n_defconfig index 33591d73e0..9d881e5d41 100644 --- a/configs/wb45n_defconfig +++ b/configs/wb45n_defconfig @@ -1,4 +1,5 @@ CONFIG_ARM=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_AT91=y CONFIG_SYS_TEXT_BASE=0x23f00000 CONFIG_TARGET_WB45N=y diff --git a/doc/README.at91 b/doc/README.at91 index 67412136ee..39dd5632ba 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -171,4 +171,4 @@ III. Watchdog support your code (make sure not to disable it in AT91Bootstrap for instance). In the U-Boot configuration, the AT91 watchdog support is enabled using - the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options. + the CONFIG_WDT and CONFIG_WDT_AT91 options. diff --git a/doc/README.watchdog b/doc/README.watchdog index 7097c8766b..f23c923910 100644 --- a/doc/README.watchdog +++ b/doc/README.watchdog @@ -14,7 +14,7 @@ CONFIG_WATCHDOG_TIMEOUT_MSECS If not given, will default to maximum timeout. This would be 128000 msec for i.mx31/35/5x/6x. -CONFIG_AT91SAM9_WATCHDOG +CONFIG_WDT_AT91 Available for AT91SAM9 to service the watchdog. CONFIG_FTWDT010_WATCHDOG diff --git a/doc/device-tree-bindings/ram/k3-am654-ddrss.txt b/doc/device-tree-bindings/ram/k3-am654-ddrss.txt new file mode 100644 index 0000000000..4ed731c524 --- /dev/null +++ b/doc/device-tree-bindings/ram/k3-am654-ddrss.txt @@ -0,0 +1,46 @@ +Texas Instruments' K3 AM654 DDRSS +================================= + +K3 based AM654 devices has DDR memory subsystem that comprises +Synopys DDR controller, Synopsis DDR phy and wrapper logic to +integrate these blocks into the device. This DDR subsystem +provides an interface to external SDRAM devices. This DDRSS driver +adds support for the initialization of the external SDRAM devices by +configuring the DDRSS registers and using the buitin PHY +initialization routines. + +DDRSS device node: +================== +Required properties: +-------------------- +- compatible: Shall be: "ti,am654-ddrss" +- reg-names ss - Map the sub system wrapper logic region + ctl - Map the controller region + phy - Map the PHY region +- reg: Contains the register map per reg-names. +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the DDRSS device id + value. This property is as per the binding, + doc/device-tree-bindings/power/ti,sci-pm-domain.txt +- clocks: Must contain an entry for enabling DDR clock. Should + be defined as per the appropriate clock bindings consumer + usage in doc/device-tree-bindings/clock/ti,sci-clk.txt + + +Optional Properties: +-------------------- +- clock-frequency: Frequency at which DDR pll should be locked. + If not provided, default frequency will be used. + +Example (AM65x): +================ + memory-controller: memory-controller@298e000 { + compatible = "ti,am654-ddrss"; + reg = <0x0298e000 0x200>, + <0x02980000 0x4000>, + <0x02988000 0x2000>; + reg-names = "ss", "ctl", "phy"; + clocks = <&k3_clks 20 0>; + power-domains = <&k3_pds 20>; + u-boot,dm-spl; + }; diff --git a/doc/device-tree-bindings/w1-eeprom/ds2502.txt b/doc/device-tree-bindings/w1-eeprom/ds2502.txt new file mode 100644 index 0000000000..7f05fc432e --- /dev/null +++ b/doc/device-tree-bindings/w1-eeprom/ds2502.txt @@ -0,0 +1,33 @@ +Maxim DS2502 driver device binding - one wire protocol add only memory from Maxim +======================= + +This memory needs to be connected to a onewire bus, as a child node. +The bus will read the device serial number and match this node with a found +device on the bus +Also check doc/device-tree-bindings/w1 for onewire bus drivers + +Driver: +- drivers/w1-eeprom/ds2502.c + +Ds2502 device-tree node properties: +Required: +* compatible = "maxim,ds2502" + +Optional: +* none + +Example: + eeprom1: eeprom@0 { + compatible = "maxim,ds2502"; + }; + +Example with parent bus: + onewire { + compatible = "fsl,imx53-owire"; + reg = <0x63fa4000 0x4000>; + + eeprom1: eeprom@0 { + compatible = "maxim,ds2502"; + }; + }; + diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index 2b15978e14..04b369aa5a 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -243,10 +243,6 @@ int clk_set_defaults(struct udevice *dev) { int ret; - /* If this is running pre-reloc state, don't take any action. */ - if (!(gd->flags & GD_FLG_RELOC)) - return 0; - debug("%s(%s)\n", __func__, dev_read_name(dev)); ret = clk_set_default_parents(dev); diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index 6cfcde8918..d9c5719a87 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -562,6 +562,19 @@ int uclass_next_device(struct udevice **devp) return uclass_get_device_tail(dev, ret, devp); } +int uclass_next_device_err(struct udevice **devp) +{ + int ret; + + ret = uclass_next_device(devp); + if (ret) + return ret; + else if (!*devp) + return -ENODEV; + + return 0; +} + int uclass_first_device_check(enum uclass_id id, struct udevice **devp) { int ret; diff --git a/drivers/gpio/pca953x_gpio.c b/drivers/gpio/pca953x_gpio.c index 0bb484498a..341527acc5 100644 --- a/drivers/gpio/pca953x_gpio.c +++ b/drivers/gpio/pca953x_gpio.c @@ -130,6 +130,25 @@ static int pca953x_read_regs(struct udevice *dev, int reg, u8 *val) return ret; } +static int pca953x_write_regs(struct udevice *dev, int reg, u8 *val) +{ + struct pca953x_info *info = dev_get_platdata(dev); + int ret = 0; + + if (info->gpio_count <= 8) { + ret = dm_i2c_write(dev, reg, val, 1); + } else if (info->gpio_count <= 16) { + ret = dm_i2c_write(dev, reg << 1, val, info->bank_count); + } else if (info->gpio_count == 40) { + /* Auto increment */ + ret = dm_i2c_write(dev, (reg << 3) | 0x80, val, info->bank_count); + } else { + return -EINVAL; + } + + return ret; +} + static int pca953x_is_output(struct udevice *dev, int offset) { struct pca953x_info *info = dev_get_platdata(dev); @@ -251,6 +270,7 @@ static int pca953x_probe(struct udevice *dev) int ret; int size; const u8 *tmp; + u8 val[MAX_BANK]; addr = dev_read_addr(dev); if (addr == 0) @@ -296,6 +316,14 @@ static int pca953x_probe(struct udevice *dev) snprintf(name, sizeof(name), "gpio@%x_", info->addr); } + /* Clear the polarity registers to no invert */ + memset(val, 0, MAX_BANK); + ret = pca953x_write_regs(dev, PCA953X_INVERT, val); + if (ret < 0) { + dev_err(dev, "Error writing invert register\n"); + return ret; + } + str = strdup(name); if (!str) return -ENOMEM; diff --git a/drivers/gpio/stm32f7_gpio.c b/drivers/gpio/stm32f7_gpio.c index b903dc46b3..a690c437eb 100644 --- a/drivers/gpio/stm32f7_gpio.c +++ b/drivers/gpio/stm32f7_gpio.c @@ -65,11 +65,31 @@ static int stm32_gpio_set_value(struct udevice *dev, unsigned offset, int value) return 0; } +static int stm32_gpio_get_function(struct udevice *dev, unsigned int offset) +{ + struct stm32_gpio_priv *priv = dev_get_priv(dev); + struct stm32_gpio_regs *regs = priv->regs; + int bits_index = MODE_BITS(offset); + int mask = MODE_BITS_MASK << bits_index; + u32 mode; + + mode = (readl(®s->moder) & mask) >> bits_index; + if (mode == STM32_GPIO_MODE_OUT) + return GPIOF_OUTPUT; + if (mode == STM32_GPIO_MODE_IN) + return GPIOF_INPUT; + if (mode == STM32_GPIO_MODE_AN) + return GPIOF_UNUSED; + + return GPIOF_FUNC; +} + static const struct dm_gpio_ops gpio_stm32_ops = { .direction_input = stm32_gpio_direction_input, .direction_output = stm32_gpio_direction_output, .get_value = stm32_gpio_get_value, .set_value = stm32_gpio_set_value, + .get_function = stm32_gpio_get_function, }; static int gpio_stm32_probe(struct udevice *dev) diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c index 36ec610c8e..3872364d6b 100644 --- a/drivers/i2c/stm32f7_i2c.c +++ b/drivers/i2c/stm32f7_i2c.c @@ -58,7 +58,7 @@ struct stm32_i2c_regs { #define STM32_I2C_CR2_ADD10 BIT(11) #define STM32_I2C_CR2_RD_WRN BIT(10) #define STM32_I2C_CR2_SADD10_MASK GENMASK(9, 0) -#define STM32_I2C_CR2_SADD10(n) ((n & STM32_I2C_CR2_SADD10_MASK)) +#define STM32_I2C_CR2_SADD10(n) (n & STM32_I2C_CR2_SADD10_MASK) #define STM32_I2C_CR2_SADD7_MASK GENMASK(7, 1) #define STM32_I2C_CR2_SADD7(n) ((n & 0x7f) << 1) #define STM32_I2C_CR2_RESET_MASK (STM32_I2C_CR2_HEAD10R \ @@ -197,7 +197,7 @@ struct stm32_i2c_priv { int speed; }; -static struct stm32_i2c_spec i2c_specs[] = { +static const struct stm32_i2c_spec i2c_specs[] = { [STM32_I2C_SPEED_STANDARD] = { .rate = STANDARD_RATE, .rate_min = 8000, @@ -236,7 +236,7 @@ static struct stm32_i2c_spec i2c_specs[] = { }, }; -static struct stm32_i2c_setup stm32f7_setup = { +static const struct stm32_i2c_setup stm32f7_setup = { .rise_time = STM32_I2C_RISE_TIME_DEFAULT, .fall_time = STM32_I2C_FALL_TIME_DEFAULT, .dnf = STM32_I2C_DNF_DEFAULT, @@ -255,7 +255,7 @@ static int stm32_i2c_check_device_busy(struct stm32_i2c_priv *i2c_priv) } static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, - struct i2c_msg *msg, bool stop) + struct i2c_msg *msg, bool stop) { struct stm32_i2c_regs *regs = i2c_priv->regs; u32 cr2 = readl(®s->cr2); @@ -299,7 +299,7 @@ static void stm32_i2c_message_start(struct stm32_i2c_priv *i2c_priv, */ static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv, - struct i2c_msg *msg, bool stop) + struct i2c_msg *msg, bool stop) { struct stm32_i2c_regs *regs = i2c_priv->regs; u32 cr2 = readl(®s->cr2); @@ -317,7 +317,7 @@ static void stm32_i2c_handle_reload(struct stm32_i2c_priv *i2c_priv, } static int stm32_i2c_wait_flags(struct stm32_i2c_priv *i2c_priv, - u32 flags, u32 *status) + u32 flags, u32 *status) { struct stm32_i2c_regs *regs = i2c_priv->regs; u32 time_start = get_timer(0); @@ -392,7 +392,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) } static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, - struct i2c_msg *msg, bool stop) + struct i2c_msg *msg, bool stop) { struct stm32_i2c_regs *regs = i2c_priv->regs; u32 status; @@ -465,7 +465,7 @@ static int stm32_i2c_message_xfer(struct stm32_i2c_priv *i2c_priv, } static int stm32_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, - int nmsgs) + int nmsgs) { struct stm32_i2c_priv *i2c_priv = dev_get_priv(bus); int ret; @@ -594,6 +594,7 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, for (l = 0; l < STM32_SCLL_MAX; l++) { u32 tscl_l = (l + 1) * prescaler + tsync; + if ((tscl_l < i2c_specs[setup->speed].l_min) || (i2cclk >= ((tscl_l - af_delay_min - dnf_delay) / 4))) { @@ -634,8 +635,8 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, } static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, - struct stm32_i2c_setup *setup, - struct stm32_i2c_timings *output) + struct stm32_i2c_setup *setup, + struct stm32_i2c_timings *output) { struct stm32_i2c_timings *v, *_v; struct list_head solutions; @@ -643,28 +644,28 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, if (setup->speed >= STM32_I2C_SPEED_END) { pr_err("%s: speed out of bound {%d/%d}\n", __func__, - setup->speed, STM32_I2C_SPEED_END - 1); + setup->speed, STM32_I2C_SPEED_END - 1); return -EINVAL; } if ((setup->rise_time > i2c_specs[setup->speed].rise_max) || (setup->fall_time > i2c_specs[setup->speed].fall_max)) { pr_err("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n", - __func__, - setup->rise_time, i2c_specs[setup->speed].rise_max, - setup->fall_time, i2c_specs[setup->speed].fall_max); + __func__, + setup->rise_time, i2c_specs[setup->speed].rise_max, + setup->fall_time, i2c_specs[setup->speed].fall_max); return -EINVAL; } if (setup->dnf > STM32_I2C_DNF_MAX) { pr_err("%s: DNF out of bound %d/%d\n", __func__, - setup->dnf, STM32_I2C_DNF_MAX); + setup->dnf, STM32_I2C_DNF_MAX); return -EINVAL; } if (setup->speed_freq > i2c_specs[setup->speed].rate) { pr_err("%s: Freq {%d/%d}\n", __func__, - setup->speed_freq, i2c_specs[setup->speed].rate); + setup->speed_freq, i2c_specs[setup->speed].rate); return -EINVAL; } @@ -693,7 +694,7 @@ exit: } static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, - struct stm32_i2c_timings *timing) + struct stm32_i2c_timings *timing) { struct stm32_i2c_setup *setup = i2c_priv->setup; int ret = 0; diff --git a/drivers/misc/fs_loader.c b/drivers/misc/fs_loader.c index b7bb96a458..baa5f8302a 100644 --- a/drivers/misc/fs_loader.c +++ b/drivers/misc/fs_loader.c @@ -55,11 +55,9 @@ static int select_fs_dev(struct device_platdata *plat) node = ofnode_get_by_phandle(plat->phandlepart.phandle); - int of_offset = ofnode_to_offset(node); - struct udevice *dev; - ret = device_get_global_by_of_offset(of_offset, &dev); + ret = device_get_global_by_ofnode(node, &dev); if (!ret) { struct blk_desc *desc = blk_get_by_device(dev); if (desc) { @@ -190,8 +188,9 @@ static int fw_get_filesystem_firmware(struct device_platdata *plat, ret = fs_read(fw_priv->name, (ulong)map_to_sysmem(firmware->data), fw_priv->offset, firmware->size, &actread); + if (ret) { - debug("Error: %d Failed to read %s from flash %lld != %d.\n", + debug("Error: %d Failed to read %s from flash %lld != %zu.\n", ret, fw_priv->name, actread, firmware->size); } else { ret = actread; diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index 5d4ffea608..79d1489dc7 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -82,6 +82,10 @@ struct lpc32xx_nand_mlc_registers { static struct lpc32xx_nand_mlc_registers __iomem *lpc32xx_nand_mlc_registers = (struct lpc32xx_nand_mlc_registers __iomem *)MLC_NAND_BASE; +#if !defined(CONFIG_SYS_MAX_NAND_CHIPS) +#define CONFIG_SYS_MAX_NAND_CHIPS 1 +#endif + #define clkdiv(v, w, o) (((1+(clk/v)) & w) << o) /** diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c index 99f6e15f4e..8615b112a2 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c @@ -2,13 +2,12 @@ /* * LPC32xx SLC NAND flash controller driver * - * (C) Copyright 2015 Vladimir Zapolskiy <vz@mleia.com> + * (C) Copyright 2015-2018 Vladimir Zapolskiy <vz@mleia.com> + * Copyright (c) 2015 Tyco Fire Protection Products. * * Hardware ECC support original source code * Copyright (C) 2008 by NXP Semiconductors * Author: Kevin Wells - * - * Copyright (c) 2015 Tyco Fire Protection Products. */ #include <common.h> @@ -22,10 +21,6 @@ #include <asm/arch/dma.h> #include <asm/arch/cpu.h> -#if defined(CONFIG_DMA_LPC32XX) && defined(CONFIG_SPL_BUILD) -#warning "DMA support in SPL image is not tested" -#endif - struct lpc32xx_nand_slc_regs { u32 data; u32 addr; @@ -78,16 +73,14 @@ struct lpc32xx_nand_slc_regs { * Note: For large page devices, the default layouts are used. */ static struct nand_ecclayout lpc32xx_nand_oob_16 = { .eccbytes = 6, - .eccpos = {10, 11, 12, 13, 14, 15}, + .eccpos = { 10, 11, 12, 13, 14, 15, }, .oobfree = { - {.offset = 0, - . length = 4}, - {.offset = 6, - . length = 4} - } + { .offset = 0, .length = 4, }, + { .offset = 6, .length = 4, }, + } }; -#if defined(CONFIG_DMA_LPC32XX) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) /* @@ -165,7 +158,7 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; } -#if defined(CONFIG_DMA_LPC32XX) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) /* * Prepares DMA descriptors for NAND RD/WR operations * If the size is < 256 Bytes then it is assumed to be @@ -324,7 +317,6 @@ static void lpc32xx_nand_xfer(struct mtd_info *mtd, const u8 *buf, if (unlikely(ret < 0)) BUG(); - /* Wait for NAND to be ready */ while (!lpc32xx_nand_dev_ready(mtd)) ; @@ -404,46 +396,18 @@ int lpc32xx_correct_data(struct mtd_info *mtd, u_char *dat, return ret2; } -#endif -#if defined(CONFIG_DMA_LPC32XX) static void lpc32xx_dma_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { lpc32xx_nand_xfer(mtd, buf, len, 1); } -#else -static void lpc32xx_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - while (len-- > 0) - *buf++ = readl(&lpc32xx_nand_slc_regs->data); -} -#endif -static uint8_t lpc32xx_read_byte(struct mtd_info *mtd) -{ - return readl(&lpc32xx_nand_slc_regs->data); -} - -#if defined(CONFIG_DMA_LPC32XX) static void lpc32xx_dma_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { lpc32xx_nand_xfer(mtd, buf, len, 0); } -#else -static void lpc32xx_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - while (len-- > 0) - writel(*buf++, &lpc32xx_nand_slc_regs->data); -} -#endif - -static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) -{ - writel(byte, &lpc32xx_nand_slc_regs->data); -} -#if defined(CONFIG_DMA_LPC32XX) /* Reuse the logic from "nand_read_page_hwecc()" */ static int lpc32xx_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) @@ -511,8 +475,30 @@ static int lpc32xx_write_page_hwecc(struct mtd_info *mtd, return 0; } +#else +static void lpc32xx_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + while (len-- > 0) + *buf++ = readl(&lpc32xx_nand_slc_regs->data); +} + +static void lpc32xx_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + while (len-- > 0) + writel(*buf++, &lpc32xx_nand_slc_regs->data); +} #endif +static uint8_t lpc32xx_read_byte(struct mtd_info *mtd) +{ + return readl(&lpc32xx_nand_slc_regs->data); +} + +static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) +{ + writel(byte, &lpc32xx_nand_slc_regs->data); +} + /* * LPC32xx has only one SLC NAND controller, don't utilize * CONFIG_SYS_NAND_SELF_INIT to be able to reuse this function @@ -520,7 +506,7 @@ static int lpc32xx_write_page_hwecc(struct mtd_info *mtd, */ int board_nand_init(struct nand_chip *lpc32xx_chip) { -#if defined(CONFIG_DMA_LPC32XX) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) int ret; /* Acquire a channel for our use */ @@ -543,7 +529,7 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_byte = lpc32xx_write_byte; -#if defined(CONFIG_DMA_LPC32XX) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) /* Hardware ECC calculation is supported when DMA driver is selected */ lpc32xx_chip->ecc.mode = NAND_ECC_HW; diff --git a/drivers/pinctrl/pinctrl-sandbox.c b/drivers/pinctrl/pinctrl-sandbox.c index 755ac08bdf..0786afe747 100644 --- a/drivers/pinctrl/pinctrl-sandbox.c +++ b/drivers/pinctrl/pinctrl-sandbox.c @@ -17,6 +17,14 @@ static const char * const sandbox_pins[] = { "W1" }; +static const char * const sandbox_pins_muxing[] = { + "I2C SCL", + "I2C SDA", + "Uart TX", + "Uart RX", + "1-wire gpio", +}; + static const char * const sandbox_groups[] = { "i2c", "serial_a", @@ -56,6 +64,15 @@ static const char *sandbox_get_pin_name(struct udevice *dev, unsigned selector) return sandbox_pins[selector]; } +static int sandbox_get_pin_muxing(struct udevice *dev, + unsigned int selector, + char *buf, int size) +{ + snprintf(buf, size, "%s", sandbox_pins_muxing[selector]); + + return 0; +} + static int sandbox_get_groups_count(struct udevice *dev) { return ARRAY_SIZE(sandbox_groups); @@ -123,6 +140,7 @@ static int sandbox_pinconf_group_set(struct udevice *dev, const struct pinctrl_ops sandbox_pinctrl_ops = { .get_pins_count = sandbox_get_pins_count, .get_pin_name = sandbox_get_pin_name, + .get_pin_muxing = sandbox_get_pin_muxing, .get_groups_count = sandbox_get_groups_count, .get_group_name = sandbox_get_group_name, .get_functions_count = sandbox_get_functions_count, diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c index c38bb212ed..6db0445067 100644 --- a/drivers/pinctrl/pinctrl-uclass.c +++ b/drivers/pinctrl/pinctrl-uclass.c @@ -249,6 +249,40 @@ int pinctrl_get_gpio_mux(struct udevice *dev, int banknum, int index) return ops->get_gpio_mux(dev, banknum, index); } +int pinctrl_get_pins_count(struct udevice *dev) +{ + struct pinctrl_ops *ops = pinctrl_get_ops(dev); + + if (!ops->get_pins_count) + return -ENOSYS; + + return ops->get_pins_count(dev); +} + +int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf, + int size) +{ + struct pinctrl_ops *ops = pinctrl_get_ops(dev); + + if (!ops->get_pin_name) + return -ENOSYS; + + snprintf(buf, size, ops->get_pin_name(dev, selector)); + + return 0; +} + +int pinctrl_get_pin_muxing(struct udevice *dev, int selector, char *buf, + int size) +{ + struct pinctrl_ops *ops = pinctrl_get_ops(dev); + + if (!ops->get_pin_muxing) + return -ENOSYS; + + return ops->get_pin_muxing(dev, selector, buf, size); +} + /** * pinconfig_post_bind() - post binding for PINCTRL uclass * Recursively bind child nodes as pinconfig devices in case of full pinctrl. diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index 31285cdd57..6d4117d941 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -14,6 +14,194 @@ DECLARE_GLOBAL_DATA_PTR; #define OTYPE_MSK 1 #define AFR_MASK 0xF +#ifndef CONFIG_SPL_BUILD +struct stm32_pinctrl_priv { + int pinctrl_ngpios; + struct list_head gpio_dev; +}; + +struct stm32_gpio_bank { + struct udevice *gpio_dev; + struct list_head list; +}; + +#define MAX_PIN_PER_BANK 16 + +static char pin_name[PINNAME_SIZE]; +#define PINMUX_MODE_COUNT 5 +static const char * const pinmux_mode[PINMUX_MODE_COUNT] = { + "gpio input", + "gpio output", + "analog", + "unknown", + "alt function", +}; + +static int stm32_pinctrl_get_af(struct udevice *dev, unsigned int offset) +{ + struct stm32_gpio_priv *priv = dev_get_priv(dev); + struct stm32_gpio_regs *regs = priv->regs; + u32 af; + u32 alt_shift = (offset % 8) * 4; + u32 alt_index = offset / 8; + + af = (readl(®s->afr[alt_index]) & + GENMASK(alt_shift + 3, alt_shift)) >> alt_shift; + + return af; +} + +static int stm32_pinctrl_get_pins_count(struct udevice *dev) +{ + struct stm32_pinctrl_priv *priv = dev_get_priv(dev); + struct gpio_dev_priv *uc_priv; + struct stm32_gpio_bank *gpio_bank; + + /* + * if get_pins_count has already been executed once on this + * pin-controller, no need to run it again + */ + if (priv->pinctrl_ngpios) + return priv->pinctrl_ngpios; + + /* + * walk through all banks to retrieve the pin-controller + * pins number + */ + list_for_each_entry(gpio_bank, &priv->gpio_dev, list) { + uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev); + + priv->pinctrl_ngpios += uc_priv->gpio_count; + } + + return priv->pinctrl_ngpios; +} + +static struct udevice *stm32_pinctrl_get_gpio_dev(struct udevice *dev, + unsigned int selector) +{ + struct stm32_pinctrl_priv *priv = dev_get_priv(dev); + struct stm32_gpio_bank *gpio_bank; + struct gpio_dev_priv *uc_priv; + int first_pin = 0; + + /* look up for the bank which owns the requested pin */ + list_for_each_entry(gpio_bank, &priv->gpio_dev, list) { + uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev); + + if (selector < (first_pin + uc_priv->gpio_count)) + /* we found the bank */ + return gpio_bank->gpio_dev; + + first_pin += uc_priv->gpio_count; + } + + return NULL; +} + +static const char *stm32_pinctrl_get_pin_name(struct udevice *dev, + unsigned int selector) +{ + struct gpio_dev_priv *uc_priv; + struct udevice *gpio_dev; + + /* look up for the bank which owns the requested pin */ + gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector); + if (!gpio_dev) { + snprintf(pin_name, PINNAME_SIZE, "Error"); + } else { + uc_priv = dev_get_uclass_priv(gpio_dev); + + snprintf(pin_name, PINNAME_SIZE, "%s%d", + uc_priv->bank_name, + selector % MAX_PIN_PER_BANK); + } + + return pin_name; +} + +static int stm32_pinctrl_get_pin_muxing(struct udevice *dev, + unsigned int selector, + char *buf, + int size) +{ + struct udevice *gpio_dev; + const char *label; + int gpio_pin; + int mode; + int af_num; + + /* look up for the bank which owns the requested pin */ + gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector); + + if (!gpio_dev) + return -ENODEV; + + /* translate pin-controller pin number to gpio pin number */ + gpio_pin = selector % MAX_PIN_PER_BANK; + + mode = gpio_get_raw_function(gpio_dev, gpio_pin, &label); + + dev_dbg(dev, "selector = %d gpio_pin = %d mode = %d\n", + selector, gpio_pin, mode); + + switch (mode) { + case GPIOF_UNKNOWN: + /* should never happen */ + return -EINVAL; + case GPIOF_UNUSED: + snprintf(buf, size, "%s", pinmux_mode[mode]); + break; + case GPIOF_FUNC: + af_num = stm32_pinctrl_get_af(gpio_dev, gpio_pin); + snprintf(buf, size, "%s %d", pinmux_mode[mode], af_num); + break; + case GPIOF_OUTPUT: + case GPIOF_INPUT: + snprintf(buf, size, "%s %s", + pinmux_mode[mode], label ? label : ""); + break; + } + + return 0; +} + +int stm32_pinctrl_probe(struct udevice *dev) +{ + struct stm32_pinctrl_priv *priv = dev_get_priv(dev); + struct udevice *gpio_dev; + struct udevice *child; + struct stm32_gpio_bank *gpio_bank; + int ret; + + INIT_LIST_HEAD(&priv->gpio_dev); + + /* + * parse pin-controller sub-nodes (ie gpio bank nodes) and fill + * a list with all gpio device reference which belongs to the + * current pin-controller. This list is used to find pin_name and + * pin muxing + */ + list_for_each_entry(child, &dev->child_head, sibling_node) { + ret = uclass_get_device_by_name(UCLASS_GPIO, child->name, + &gpio_dev); + if (ret < 0) + continue; + + gpio_bank = malloc(sizeof(*gpio_bank)); + if (!gpio_bank) { + dev_err(dev, "Not enough memory\n"); + return -ENOMEM; + } + + gpio_bank->gpio_dev = gpio_dev; + list_add_tail(&gpio_bank->list, &priv->gpio_dev); + } + + return 0; +} +#endif + static int stm32_gpio_config(struct gpio_desc *desc, const struct stm32_gpio_ctl *ctl) { @@ -182,6 +370,11 @@ static struct pinctrl_ops stm32_pinctrl_ops = { #else /* PINCTRL_FULL */ .set_state_simple = stm32_pinctrl_set_state_simple, #endif /* PINCTRL_FULL */ +#ifndef CONFIG_SPL_BUILD + .get_pin_name = stm32_pinctrl_get_pin_name, + .get_pins_count = stm32_pinctrl_get_pins_count, + .get_pin_muxing = stm32_pinctrl_get_pin_muxing, +#endif }; static const struct udevice_id stm32_pinctrl_ids[] = { @@ -195,9 +388,13 @@ static const struct udevice_id stm32_pinctrl_ids[] = { }; U_BOOT_DRIVER(pinctrl_stm32) = { - .name = "pinctrl_stm32", - .id = UCLASS_PINCTRL, - .of_match = stm32_pinctrl_ids, - .ops = &stm32_pinctrl_ops, - .bind = dm_scan_fdt_dev, + .name = "pinctrl_stm32", + .id = UCLASS_PINCTRL, + .of_match = stm32_pinctrl_ids, + .ops = &stm32_pinctrl_ops, + .bind = dm_scan_fdt_dev, +#ifndef CONFIG_SPL_BUILD + .probe = stm32_pinctrl_probe, + .priv_auto_alloc_size = sizeof(struct stm32_pinctrl_priv), +#endif }; diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 54bb4b419f..fbf7d7b20f 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -43,4 +43,15 @@ config MPC83XX_SDRAM the RAM through the use of SPD (Serial Presence Detect) is supported via device tree settings. +config K3_AM654_DDRSS + bool "Enable AM654 DDRSS support" + depends on RAM && SOC_K3_AM6 + help + K3 based AM654 devices has DDR memory subsystem that comprises + Synopys DDR controller, Synopsis DDR phy and wrapper logic to + intergrate these blocks into the device. This DDR subsystem + provides an interface to external SDRAM devices. Enabling this + config add support for the initialization of the external + SDRAM devices connected to DDR subsystem. + source "drivers/ram/stm32mp1/Kconfig" diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index cfba57f0fd..e14c1cf592 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_STM32_SDRAM) += stm32_sdram.o obj-$(CONFIG_ARCH_BMIPS) += bmips_ram.o obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ + +obj-$(CONFIG_K3_AM654_DDRSS) += k3-am654-ddrss.o diff --git a/drivers/ram/k3-am654-ddrss.c b/drivers/ram/k3-am654-ddrss.c new file mode 100644 index 0000000000..7957f678a1 --- /dev/null +++ b/drivers/ram/k3-am654-ddrss.c @@ -0,0 +1,825 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Texas Instruments' AM654 DDRSS driver + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla <lokeshvutla@ti.com> + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <ram.h> +#include <asm/io.h> +#include <power-domain.h> +#include <dm.h> +#include <asm/arch/sys_proto.h> +#include <power/regulator.h> +#include "k3-am654-ddrss.h" + +#define LDELAY 10000 + +/* DDRSS PHY configuration register fixed values */ +#define DDRSS_DDRPHY_RANKIDR_RANK0 0 + +/** + * struct am654_ddrss_desc - Description of ddrss integration. + * @dev: DDRSS device pointer + * @ddrss_ss_cfg: DDRSS wrapper logic region base address + * @ddrss_ctl_cfg: DDRSS controller region base address + * @ddrss_phy_cfg: DDRSS PHY region base address + * @ddrss_clk: DDRSS clock description + * @vtt_supply: VTT Supply regulator + * @ddrss_pwrdmn: DDRSS power domain description + * @params: SDRAM configuration parameters + */ +struct am654_ddrss_desc { + struct udevice *dev; + void __iomem *ddrss_ss_cfg; + void __iomem *ddrss_ctl_cfg; + void __iomem *ddrss_phy_cfg; + struct clk ddrss_clk; + struct udevice *vtt_supply; + struct power_domain ddrcfg_pwrdmn; + struct power_domain ddrdata_pwrdmn; + struct ddrss_params params; +}; + +static inline u32 ddrss_readl(void __iomem *addr, unsigned int offset) +{ + return readl(addr + offset); +} + +static inline void ddrss_writel(void __iomem *addr, unsigned int offset, + u32 data) +{ + debug("%s: addr = 0x%p, value = 0x%x\n", __func__, addr + offset, data); + writel(data, addr + offset); +} + +#define ddrss_ctl_writel(off, val) ddrss_writel(ddrss->ddrss_ctl_cfg, off, val) +#define ddrss_ctl_readl(off) ddrss_readl(ddrss->ddrss_ctl_cfg, off) + +static inline u32 am654_ddrss_get_type(struct am654_ddrss_desc *ddrss) +{ + return ddrss_ctl_readl(DDRSS_DDRCTL_MSTR) & MSTR_DDR_TYPE_MASK; +} + +/** + * am654_ddrss_dram_wait_for_init_complete() - Wait for init to complete + * + * After detecting the DDR type this function will pause until the + * initialization is complete. Each DDR type has mask of multiple bits. + * The size of the field depends on the DDR Type. If the initialization + * does not complete and error will be returned and will cause the boot to halt. + * + */ +static int am654_ddrss_dram_wait_for_init_complt(struct am654_ddrss_desc *ddrss) +{ + u32 val, mask; + + val = am654_ddrss_get_type(ddrss); + + switch (val) { + case DDR_TYPE_LPDDR4: + case DDR_TYPE_DDR4: + mask = DDR4_STAT_MODE_MASK; + break; + case DDR_TYPE_DDR3: + mask = DDR3_STAT_MODE_MASK; + break; + default: + printf("Unsupported DDR type 0x%x\n", val); + return -EINVAL; + } + + if (!wait_on_value(mask, DDR_MODE_NORMAL, + ddrss->ddrss_ctl_cfg + DDRSS_DDRCTL_STAT, LDELAY)) + return -ETIMEDOUT; + + return 0; +} + +/** + * am654_ddrss_ctrl_configuration() - Configure Controller specific registers + * @dev: corresponding ddrss device + */ +static void am654_ddrss_ctrl_configuration(struct am654_ddrss_desc *ddrss) +{ + struct ddrss_ddrctl_timing_params *tmg = &ddrss->params.ctl_timing; + struct ddrss_ddrctl_reg_params *reg = &ddrss->params.ctl_reg; + struct ddrss_ddrctl_ecc_params *ecc = &ddrss->params.ctl_ecc; + struct ddrss_ddrctl_crc_params *crc = &ddrss->params.ctl_crc; + struct ddrss_ddrctl_map_params *map = &ddrss->params.ctl_map; + u32 val; + + debug("%s: DDR controller register configuration started\n", __func__); + + ddrss_ctl_writel(DDRSS_DDRCTL_MSTR, reg->ddrctl_mstr); + ddrss_ctl_writel(DDRSS_DDRCTL_RFSHCTL0, reg->ddrctl_rfshctl0); + ddrss_ctl_writel(DDRSS_DDRCTL_RFSHTMG, reg->ddrctl_rfshtmg); + + ddrss_ctl_writel(DDRSS_DDRCTL_ECCCFG0, ecc->ddrctl_ecccfg0); + ddrss_ctl_writel(DDRSS_DDRCTL_CRCPARCTL0, crc->ddrctl_crcparctl0); + ddrss_ctl_writel(DDRSS_DDRCTL_CRCPARCTL1, crc->ddrctl_crcparctl1); + ddrss_ctl_writel(DDRSS_DDRCTL_CRCPARCTL2, crc->ddrctl_crcparctl2); + + ddrss_ctl_writel(DDRSS_DDRCTL_INIT0, reg->ddrctl_init0); + ddrss_ctl_writel(DDRSS_DDRCTL_INIT1, reg->ddrctl_init1); + ddrss_ctl_writel(DDRSS_DDRCTL_INIT3, reg->ddrctl_init3); + ddrss_ctl_writel(DDRSS_DDRCTL_INIT4, reg->ddrctl_init4); + ddrss_ctl_writel(DDRSS_DDRCTL_INIT5, reg->ddrctl_init5); + ddrss_ctl_writel(DDRSS_DDRCTL_INIT6, reg->ddrctl_init6); + ddrss_ctl_writel(DDRSS_DDRCTL_INIT7, reg->ddrctl_init7); + + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG0, tmg->ddrctl_dramtmg0); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG1, tmg->ddrctl_dramtmg1); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG2, tmg->ddrctl_dramtmg2); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG3, tmg->ddrctl_dramtmg3); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG4, tmg->ddrctl_dramtmg4); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG5, tmg->ddrctl_dramtmg5); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG8, tmg->ddrctl_dramtmg8); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG9, tmg->ddrctl_dramtmg9); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG11, tmg->ddrctl_dramtmg11); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG12, tmg->ddrctl_dramtmg12); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG13, tmg->ddrctl_dramtmg13); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG15, tmg->ddrctl_dramtmg15); + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG17, tmg->ddrctl_dramtmg17); + + ddrss_ctl_writel(DDRSS_DDRCTL_ZQCTL0, reg->ddrctl_zqctl0); + ddrss_ctl_writel(DDRSS_DDRCTL_ZQCTL1, reg->ddrctl_zqctl1); + + ddrss_ctl_writel(DDRSS_DDRCTL_DFITMG0, reg->ddrctl_dfitmg0); + ddrss_ctl_writel(DDRSS_DDRCTL_DFITMG1, reg->ddrctl_dfitmg1); + ddrss_ctl_writel(DDRSS_DDRCTL_DFITMG2, reg->ddrctl_dfitmg2); + + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP0, map->ddrctl_addrmap0); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP1, map->ddrctl_addrmap1); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP2, map->ddrctl_addrmap2); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP3, map->ddrctl_addrmap3); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP4, map->ddrctl_addrmap4); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP5, map->ddrctl_addrmap5); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP6, map->ddrctl_addrmap6); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP7, map->ddrctl_addrmap7); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP8, map->ddrctl_addrmap8); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP9, map->ddrctl_addrmap9); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP10, map->ddrctl_addrmap10); + ddrss_ctl_writel(DDRSS_DDRCTL_ADDRMAP11, map->ddrctl_addrmap11); + + ddrss_ctl_writel(DDRSS_DDRCTL_ODTCFG, reg->ddrctl_odtcfg); + ddrss_ctl_writel(DDRSS_DDRCTL_ODTMAP, reg->ddrctl_odtmap); + + /* Disable refreshes */ + val = ddrss_ctl_readl(DDRSS_DDRCTL_RFSHCTL3); + val |= 0x01; + ddrss_ctl_writel(DDRSS_DDRCTL_RFSHCTL3, val); + + debug("%s: DDR controller configuration completed\n", __func__); +} + +#define ddrss_phy_writel(off, val) \ + do { \ + ddrss_writel(ddrss->ddrss_phy_cfg, off, val); \ + sdelay(10); /* Delay at least 20 clock cycles */ \ + } while (0) + +#define ddrss_phy_readl(off) \ + ({ \ + u32 val = ddrss_readl(ddrss->ddrss_phy_cfg, off); \ + sdelay(10); /* Delay at least 20 clock cycles */ \ + val; \ + }) + +/** + * am654_ddrss_phy_configuration() - Configure PHY specific registers + * @ddrss: corresponding ddrss device + */ +static void am654_ddrss_phy_configuration(struct am654_ddrss_desc *ddrss) +{ + struct ddrss_ddrphy_ioctl_params *ioctl = &ddrss->params.phy_ioctl; + struct ddrss_ddrphy_timing_params *tmg = &ddrss->params.phy_timing; + struct ddrss_ddrphy_ctrl_params *ctrl = &ddrss->params.phy_ctrl; + struct ddrss_ddrphy_cfg_params *cfg = &ddrss->params.phy_cfg; + struct ddrss_ddrphy_zq_params *zq = &ddrss->params.phy_zq; + + debug("%s: DDR phy register configuration started\n", __func__); + + ddrss_phy_writel(DDRSS_DDRPHY_PGCR1, cfg->ddrphy_pgcr1); + ddrss_phy_writel(DDRSS_DDRPHY_PGCR2, cfg->ddrphy_pgcr2); + ddrss_phy_writel(DDRSS_DDRPHY_PGCR3, cfg->ddrphy_pgcr3); + ddrss_phy_writel(DDRSS_DDRPHY_PGCR6, cfg->ddrphy_pgcr6); + + ddrss_phy_writel(DDRSS_DDRPHY_PTR3, tmg->ddrphy_ptr3); + ddrss_phy_writel(DDRSS_DDRPHY_PTR4, tmg->ddrphy_ptr4); + ddrss_phy_writel(DDRSS_DDRPHY_PTR5, tmg->ddrphy_ptr5); + ddrss_phy_writel(DDRSS_DDRPHY_PTR6, tmg->ddrphy_ptr6); + + ddrss_phy_writel(DDRSS_DDRPHY_PLLCR0, ctrl->ddrphy_pllcr0); + + ddrss_phy_writel(DDRSS_DDRPHY_DXCCR, cfg->ddrphy_dxccr); + ddrss_phy_writel(DDRSS_DDRPHY_DSGCR, cfg->ddrphy_dsgcr); + + ddrss_phy_writel(DDRSS_DDRPHY_DCR, cfg->ddrphy_dcr); + + ddrss_phy_writel(DDRSS_DDRPHY_DTPR0, tmg->ddrphy_dtpr0); + ddrss_phy_writel(DDRSS_DDRPHY_DTPR1, tmg->ddrphy_dtpr1); + ddrss_phy_writel(DDRSS_DDRPHY_DTPR2, tmg->ddrphy_dtpr2); + ddrss_phy_writel(DDRSS_DDRPHY_DTPR3, tmg->ddrphy_dtpr3); + ddrss_phy_writel(DDRSS_DDRPHY_DTPR4, tmg->ddrphy_dtpr4); + ddrss_phy_writel(DDRSS_DDRPHY_DTPR5, tmg->ddrphy_dtpr5); + ddrss_phy_writel(DDRSS_DDRPHY_DTPR6, tmg->ddrphy_dtpr6); + + ddrss_phy_writel(DDRSS_DDRPHY_ZQCR, zq->ddrphy_zqcr); + ddrss_phy_writel(DDRSS_DDRPHY_ZQ0PR0, zq->ddrphy_zq0pr0); + ddrss_phy_writel(DDRSS_DDRPHY_ZQ1PR0, zq->ddrphy_zq1pr0); + + ddrss_phy_writel(DDRSS_DDRPHY_MR0, ctrl->ddrphy_mr0); + ddrss_phy_writel(DDRSS_DDRPHY_MR1, ctrl->ddrphy_mr1); + ddrss_phy_writel(DDRSS_DDRPHY_MR2, ctrl->ddrphy_mr2); + ddrss_phy_writel(DDRSS_DDRPHY_MR3, ctrl->ddrphy_mr3); + ddrss_phy_writel(DDRSS_DDRPHY_MR4, ctrl->ddrphy_mr4); + ddrss_phy_writel(DDRSS_DDRPHY_MR5, ctrl->ddrphy_mr5); + ddrss_phy_writel(DDRSS_DDRPHY_MR6, ctrl->ddrphy_mr6); + + ddrss_phy_writel(DDRSS_DDRPHY_VTCR0, ctrl->ddrphy_vtcr0); + + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL0PLLCR0, cfg->ddrphy_dx8sl0pllcr0); + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL1PLLCR0, cfg->ddrphy_dx8sl1pllcr0); + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL2PLLCR0, cfg->ddrphy_dx8sl2pllcr0); + + ddrss_phy_writel(DDRSS_DDRPHY_DTCR0, ctrl->ddrphy_dtcr0); + ddrss_phy_writel(DDRSS_DDRPHY_DTCR1, ctrl->ddrphy_dtcr1); + + ddrss_phy_writel(DDRSS_DDRPHY_ACIOCR5, ioctl->ddrphy_aciocr5); + ddrss_phy_writel(DDRSS_DDRPHY_IOVCR0, ioctl->ddrphy_iovcr0); + + ddrss_phy_writel(DDRSS_DDRPHY_DX4GCR0, cfg->ddrphy_dx4gcr0); + ddrss_phy_writel(DDRSS_DDRPHY_DX4GCR1, cfg->ddrphy_dx4gcr1); + ddrss_phy_writel(DDRSS_DDRPHY_DX4GCR2, cfg->ddrphy_dx4gcr2); + ddrss_phy_writel(DDRSS_DDRPHY_DX4GCR3, cfg->ddrphy_dx4gcr3); + + ddrss_phy_writel(DDRSS_DDRPHY_DX0GCR4, cfg->ddrphy_dx0gcr4); + ddrss_phy_writel(DDRSS_DDRPHY_DX1GCR4, cfg->ddrphy_dx1gcr4); + ddrss_phy_writel(DDRSS_DDRPHY_DX2GCR4, cfg->ddrphy_dx2gcr4); + ddrss_phy_writel(DDRSS_DDRPHY_DX3GCR4, cfg->ddrphy_dx3gcr4); + + ddrss_phy_writel(DDRSS_DDRPHY_PGCR5, cfg->ddrphy_pgcr5); + ddrss_phy_writel(DDRSS_DDRPHY_DX0GCR5, cfg->ddrphy_dx0gcr5); + ddrss_phy_writel(DDRSS_DDRPHY_DX1GCR5, cfg->ddrphy_dx1gcr5); + ddrss_phy_writel(DDRSS_DDRPHY_DX2GCR5, cfg->ddrphy_dx2gcr5); + ddrss_phy_writel(DDRSS_DDRPHY_DX3GCR5, cfg->ddrphy_dx3gcr5); + + ddrss_phy_writel(DDRSS_DDRPHY_RANKIDR, DDRSS_DDRPHY_RANKIDR_RANK0); + + ddrss_phy_writel(DDRSS_DDRPHY_DX0GTR0, cfg->ddrphy_dx0gtr0); + ddrss_phy_writel(DDRSS_DDRPHY_DX1GTR0, cfg->ddrphy_dx1gtr0); + ddrss_phy_writel(DDRSS_DDRPHY_DX2GTR0, cfg->ddrphy_dx2gtr0); + ddrss_phy_writel(DDRSS_DDRPHY_DX3GTR0, cfg->ddrphy_dx3gtr0); + ddrss_phy_writel(DDRSS_DDRPHY_ODTCR, cfg->ddrphy_odtcr); + + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL0IOCR, cfg->ddrphy_dx8sl0iocr); + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL1IOCR, cfg->ddrphy_dx8sl1iocr); + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL2IOCR, cfg->ddrphy_dx8sl2iocr); + + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL0DXCTL2, cfg->ddrphy_dx8sl0dxctl2); + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL1DXCTL2, cfg->ddrphy_dx8sl1dxctl2); + ddrss_phy_writel(DDRSS_DDRPHY_DX8SL2DXCTL2, cfg->ddrphy_dx8sl2dxctl2); + + debug("%s: DDR phy register configuration completed\n", __func__); +} + +static int __phy_builtin_init_routine(struct am654_ddrss_desc *ddrss, + u32 init_value, u32 sts_mask, + u32 err_mask) +{ + int ret; + + ddrss_phy_writel(DDRSS_DDRPHY_PIR, init_value | PIR_INIT_MASK); + + sdelay(5); /* Delay at least 10 clock cycles */ + + if (!wait_on_value(sts_mask, sts_mask, + ddrss->ddrss_phy_cfg + DDRSS_DDRPHY_PGSR0, LDELAY)) + return -ETIMEDOUT; + + sdelay(16); /* Delay at least 32 clock cycles */ + + ret = ddrss_phy_readl(DDRSS_DDRPHY_PGSR0); + debug("%s: PGSR0 val = 0x%x\n", __func__, ret); + if (ret & err_mask) + return -EINVAL; + + return 0; +} + +int write_leveling(struct am654_ddrss_desc *ddrss) +{ + int ret; + + debug("%s: Write leveling started\n", __func__); + + ret = __phy_builtin_init_routine(ddrss, PIR_WL_MASK, PGSR0_WLDONE_MASK, + PGSR0_WLERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: Write leveling timedout\n", + __func__); + else + printf("%s:ERROR: Write leveling failed\n", __func__); + return ret; + } + + debug("%s: Write leveling completed\n", __func__); + return 0; +} + +int read_dqs_training(struct am654_ddrss_desc *ddrss) +{ + int ret; + + debug("%s: Read DQS training started\n", __func__); + + ret = __phy_builtin_init_routine(ddrss, PIR_QSGATE_MASK, + PGSR0_QSGDONE_MASK, PGSR0_QSGERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: Read DQS timedout\n", __func__); + else + printf("%s:ERROR: Read DQS Gate training failed\n", + __func__); + return ret; + } + + debug("%s: Read DQS training completed\n", __func__); + return 0; +} + +int rest_training(struct am654_ddrss_desc *ddrss) +{ + int ret; + u32 val; + u32 dgsl0, dgsl1, dgsl2, dgsl3, rddly, rd2wr_wr2rd; + + debug("%s: Rest of the training started\n", __func__); + + debug("%s: Write Leveling adjustment\n", __func__); + ret = __phy_builtin_init_routine(ddrss, PIR_WLADJ_MASK, + PGSR0_WLADONE_MASK, PGSR0_WLAERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s:ERROR: Write Leveling adjustment timedout\n", + __func__); + else + printf("%s: ERROR: Write Leveling adjustment failed\n", + __func__); + return ret; + } + + debug("%s: Read Deskew adjustment\n", __func__); + ret = __phy_builtin_init_routine(ddrss, PIR_RDDSKW_MASK, + PGSR0_RDDONE_MASK, PGSR0_RDERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: Read Deskew timedout\n", __func__); + else + printf("%s: ERROR: Read Deskew failed\n", __func__); + return ret; + } + + debug("%s: Write Deskew adjustment\n", __func__); + ret = __phy_builtin_init_routine(ddrss, PIR_WRDSKW_MASK, + PGSR0_WDDONE_MASK, PGSR0_WDERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: Write Deskew timedout\n", __func__); + else + printf("%s: ERROR: Write Deskew failed\n", __func__); + return ret; + } + + debug("%s: Read Eye training\n", __func__); + ret = __phy_builtin_init_routine(ddrss, PIR_RDEYE_MASK, + PGSR0_REDONE_MASK, PGSR0_REERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: Read Eye training timedout\n", + __func__); + else + printf("%s: ERROR: Read Eye training failed\n", + __func__); + return ret; + } + + debug("%s: Write Eye training\n", __func__); + ret = __phy_builtin_init_routine(ddrss, PIR_WREYE_MASK, + PGSR0_WEDONE_MASK, PGSR0_WEERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: Write Eye training timedout\n", + __func__); + else + printf("%s: ERROR: Write Eye training failed\n", + __func__); + return ret; + } + + debug("%s: VREF training\n", __func__); + ret = __phy_builtin_init_routine(ddrss, PIR_VREF_MASK, PGSR0_VDONE_MASK, + PGSR0_VERR_MASK); + if (ret) { + if (ret == -ETIMEDOUT) + printf("%s: ERROR: VREF training timedout\n", __func__); + else + printf("%s: ERROR: VREF training failed\n", __func__); + return ret; + } + + ddrss_phy_writel(DDRSS_DDRPHY_RANKIDR, 0x00000000); + dgsl0 = (ddrss_phy_readl(DDRSS_DDRPHY_DX0GTR0) & 0x1F) >> 2; + dgsl1 = (ddrss_phy_readl(DDRSS_DDRPHY_DX1GTR0) & 0x1F) >> 2; + dgsl2 = (ddrss_phy_readl(DDRSS_DDRPHY_DX2GTR0) & 0x1F) >> 2; + dgsl3 = (ddrss_phy_readl(DDRSS_DDRPHY_DX3GTR0) & 0x1F) >> 2; + + rddly = dgsl0; + if (dgsl1 < rddly) + rddly = dgsl1; + if (dgsl2 < rddly) + rddly = dgsl2; + if (dgsl3 < rddly) + rddly = dgsl3; + + rddly += 5; + + /* Update rddly based on dgsl values */ + val = (ddrss_phy_readl(DDRSS_DDRPHY_DX0GCR0) & ~0xF00000); + val |= (rddly << 20); + ddrss_phy_writel(DDRSS_DDRPHY_DX0GCR0, val); + + val = (ddrss_phy_readl(DDRSS_DDRPHY_DX1GCR0) & ~0xF00000); + val |= (rddly << 20); + ddrss_phy_writel(DDRSS_DDRPHY_DX1GCR0, val); + + val = (ddrss_phy_readl(DDRSS_DDRPHY_DX2GCR0) & ~0xF00000); + val |= (rddly << 20); + ddrss_phy_writel(DDRSS_DDRPHY_DX2GCR0, val); + + val = (ddrss_phy_readl(DDRSS_DDRPHY_DX3GCR0) & ~0xF00000); + val |= (rddly << 20); + ddrss_phy_writel(DDRSS_DDRPHY_DX3GCR0, val); + + /* + * Add system latency derived from training back into rd2wr and wr2rd + * rd2wr = RL + BL/2 + 1 + WR_PREAMBLE - WL + max(DXnGTR0.DGSL) / 2 + * wr2rd = CWL + PL + BL/2 + tWTR_L + max(DXnGTR0.DGSL) / 2 + */ + + /* Select rank 0 */ + ddrss_phy_writel(DDRSS_DDRPHY_RANKIDR, 0x00000000); + + dgsl0 = (ddrss_phy_readl(DDRSS_DDRPHY_DX0GTR0) & 0x1F); + dgsl1 = (ddrss_phy_readl(DDRSS_DDRPHY_DX1GTR0) & 0x1F); + dgsl2 = (ddrss_phy_readl(DDRSS_DDRPHY_DX2GTR0) & 0x1F); + dgsl3 = (ddrss_phy_readl(DDRSS_DDRPHY_DX3GTR0) & 0x1F); + + /* Find maximum value across all bytes */ + rd2wr_wr2rd = dgsl0; + if (dgsl1 > rd2wr_wr2rd) + rd2wr_wr2rd = dgsl1; + if (dgsl2 > rd2wr_wr2rd) + rd2wr_wr2rd = dgsl2; + if (dgsl3 > rd2wr_wr2rd) + rd2wr_wr2rd = dgsl3; + + rd2wr_wr2rd >>= 1; + + /* Now add in adjustment to DRAMTMG2 bit fields for rd2wr and wr2rd */ + /* Clear VSWCTL.sw_done */ + ddrss_ctl_writel(DDRSS_DDRCTL_SWCTL, + ddrss_ctl_readl(DDRSS_DDRCTL_SWCTL) & ~0x1); + /* Adjust rd2wr */ + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG2, + ddrss_ctl_readl(DDRSS_DDRCTL_DRAMTMG2) + + (rd2wr_wr2rd << 8)); + /* Adjust wr2rd */ + ddrss_ctl_writel(DDRSS_DDRCTL_DRAMTMG2, + ddrss_ctl_readl(DDRSS_DDRCTL_DRAMTMG2) + + rd2wr_wr2rd); + /* Set VSWCTL.sw_done */ + ddrss_ctl_writel(DDRSS_DDRCTL_SWCTL, + ddrss_ctl_readl(DDRSS_DDRCTL_SWCTL) | 0x1); + /* Wait until settings are applied */ + while (!(ddrss_ctl_readl(DDRSS_DDRCTL_SWSTAT) & 0x1)) { + /* Do nothing */ + }; + + debug("%s: Rest of the training completed\n", __func__); + return 0; +} + +/** + * am654_ddrss_init() - Initialization sequence for enabling the SDRAM + * device attached to ddrss. + * @dev: corresponding ddrss device + * + * Does all the initialization sequence that is required to get attached + * ddr in a working state. After this point, ddr should be accessible. + * Return: 0 if all went ok, else corresponding error message. + */ +static int am654_ddrss_init(struct am654_ddrss_desc *ddrss) +{ + int ret; + + debug("%s(ddrss=%p)\n", __func__, ddrss); + + ddrss_writel(ddrss->ddrss_ss_cfg, DDRSS_V2H_CTL_REG, 0x000073FF); + + am654_ddrss_ctrl_configuration(ddrss); + + /* Release the reset to the controller */ + clrbits_le32(ddrss->ddrss_ss_cfg + DDRSS_SS_CTL_REG, + SS_CTL_REG_CTL_ARST_MASK); + + am654_ddrss_phy_configuration(ddrss); + + ret = __phy_builtin_init_routine(ddrss, PIR_PHY_INIT, 0x1, 0); + if (ret) { + dev_err(ddrss->dev, "PHY initialization failed %d\n", ret); + return ret; + } + + ret = __phy_builtin_init_routine(ddrss, PIR_DRAM_INIT, + PGSR0_DRAM_INIT_MASK, 0); + if (ret) { + dev_err(ddrss->dev, "DRAM initialization failed %d\n", ret); + return ret; + } + + ret = am654_ddrss_dram_wait_for_init_complt(ddrss); + if (ret) { + printf("%s: ERROR: DRAM Wait for init complete timedout\n", + __func__); + return ret; + } + + ret = write_leveling(ddrss); + if (ret) + return ret; + + ret = read_dqs_training(ddrss); + if (ret) + return ret; + + ret = rest_training(ddrss); + if (ret) + return ret; + + /* Enabling refreshes after training is done */ + ddrss_ctl_writel(DDRSS_DDRCTL_RFSHCTL3, + ddrss_ctl_readl(DDRSS_DDRCTL_RFSHCTL3) & ~0x1); + + /* Disable PUBMODE after training is done */ + ddrss_phy_writel(DDRSS_DDRPHY_PGCR1, + ddrss_phy_readl(DDRSS_DDRPHY_PGCR1) & ~0x40); + + return 0; +} + +/** + * am654_ddrss_power_on() - Enable power and clocks for ddrss + * @dev: corresponding ddrss device + * + * Tries to enable all the corresponding clocks to the ddrss and sets it + * to the right frequency and then power on the ddrss. + * Return: 0 if all went ok, else corresponding error message. + */ +static int am654_ddrss_power_on(struct am654_ddrss_desc *ddrss) +{ + int ret; + + debug("%s(ddrss=%p)\n", __func__, ddrss); + + ret = clk_enable(&ddrss->ddrss_clk); + if (ret) { + dev_err(ddrss->dev, "clk_enable() failed: %d\n", ret); + return ret; + } + + ret = power_domain_on(&ddrss->ddrcfg_pwrdmn); + if (ret) { + dev_err(ddrss->dev, "power_domain_on() failed: %d\n", ret); + return ret; + } + + ret = power_domain_on(&ddrss->ddrdata_pwrdmn); + if (ret) { + dev_err(ddrss->dev, "power_domain_on() failed: %d\n", ret); + return ret; + } + + /* VTT enable */ +#if CONFIG_IS_ENABLED(DM_REGULATOR) + device_get_supply_regulator(ddrss->dev, "vtt-supply", + &ddrss->vtt_supply); + ret = regulator_set_value(ddrss->vtt_supply, 3300000); + if (ret) + return ret; + debug("VTT regulator enabled\n"); +#endif + + return 0; +} + +/** + * am654_ddrss_ofdata_to_priv() - generate private data from device tree + * @dev: corresponding ddrss device + * + * Return: 0 if all went ok, else corresponding error message. + */ +static int am654_ddrss_ofdata_to_priv(struct udevice *dev) +{ + struct am654_ddrss_desc *ddrss = dev_get_priv(dev); + phys_addr_t reg; + int ret; + + debug("%s(dev=%p)\n", __func__, dev); + + ret = clk_get_by_index(dev, 0, &ddrss->ddrss_clk); + if (ret) { + dev_err(dev, "clk_get failed: %d\n", ret); + return ret; + } + + ret = power_domain_get_by_index(dev, &ddrss->ddrcfg_pwrdmn, 0); + if (ret) { + dev_err(dev, "power_domain_get() failed: %d\n", ret); + return ret; + } + + ret = power_domain_get_by_index(dev, &ddrss->ddrdata_pwrdmn, 1); + if (ret) { + dev_err(dev, "power_domain_get() failed: %d\n", ret); + return ret; + } + + reg = devfdt_get_addr_name(dev, "ss"); + if (reg == FDT_ADDR_T_NONE) { + dev_err(dev, "No reg property for DDRSS wrapper logic\n"); + return -EINVAL; + } + ddrss->ddrss_ss_cfg = (void *)reg; + + reg = devfdt_get_addr_name(dev, "ctl"); + if (reg == FDT_ADDR_T_NONE) { + dev_err(dev, "No reg property for Controller region\n"); + return -EINVAL; + } + ddrss->ddrss_ctl_cfg = (void *)reg; + + reg = devfdt_get_addr_name(dev, "phy"); + if (reg == FDT_ADDR_T_NONE) { + dev_err(dev, "No reg property for PHY region\n"); + return -EINVAL; + } + ddrss->ddrss_phy_cfg = (void *)reg; + + ret = dev_read_u32_array(dev, "ti,ctl-reg", + (u32 *)&ddrss->params.ctl_reg, + sizeof(ddrss->params.ctl_reg) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,ctl-reg params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,ctl-crc", + (u32 *)&ddrss->params.ctl_crc, + sizeof(ddrss->params.ctl_crc) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,ctl-crc params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,ctl-ecc", + (u32 *)&ddrss->params.ctl_ecc, + sizeof(ddrss->params.ctl_ecc) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,ctl-ecc params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,ctl-map", + (u32 *)&ddrss->params.ctl_map, + sizeof(ddrss->params.ctl_map) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,ctl-map params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,ctl-pwr", + (u32 *)&ddrss->params.ctl_pwr, + sizeof(ddrss->params.ctl_pwr) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,ctl-pwr params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,ctl-timing", + (u32 *)&ddrss->params.ctl_timing, + sizeof(ddrss->params.ctl_timing) / + sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,ctl-timing params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,phy-cfg", + (u32 *)&ddrss->params.phy_cfg, + sizeof(ddrss->params.phy_cfg) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,phy-cfg params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,phy-ctl", + (u32 *)&ddrss->params.phy_ctrl, + sizeof(ddrss->params.phy_ctrl) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,phy-ctl params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,phy-ioctl", + (u32 *)&ddrss->params.phy_ioctl, + sizeof(ddrss->params.phy_ioctl) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,phy-ioctl params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,phy-timing", + (u32 *)&ddrss->params.phy_timing, + sizeof(ddrss->params.phy_timing) / + sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,phy-timing params\n"); + return ret; + } + + ret = dev_read_u32_array(dev, "ti,phy-zq", (u32 *)&ddrss->params.phy_zq, + sizeof(ddrss->params.phy_zq) / sizeof(u32)); + if (ret) { + dev_err(dev, "Cannot read ti,phy-zq params\n"); + return ret; + } + + return ret; +} + +/** + * am654_ddrss_probe() - Basic probe + * @dev: corresponding ddrss device + * + * Return: 0 if all went ok, else corresponding error message + */ +static int am654_ddrss_probe(struct udevice *dev) +{ + struct am654_ddrss_desc *ddrss = dev_get_priv(dev); + int ret; + + debug("%s(dev=%p)\n", __func__, dev); + + ret = am654_ddrss_ofdata_to_priv(dev); + if (ret) + return ret; + + ddrss->dev = dev; + ret = am654_ddrss_power_on(ddrss); + if (ret) + return ret; + + ret = am654_ddrss_init(ddrss); + + return ret; +} + +static int am654_ddrss_get_info(struct udevice *dev, struct ram_info *info) +{ + return 0; +} + +static struct ram_ops am654_ddrss_ops = { + .get_info = am654_ddrss_get_info, +}; + +static const struct udevice_id am654_ddrss_ids[] = { + { .compatible = "ti,am654-ddrss" }, + { } +}; + +U_BOOT_DRIVER(am654_ddrss) = { + .name = "am654_ddrss", + .id = UCLASS_RAM, + .of_match = am654_ddrss_ids, + .ops = &am654_ddrss_ops, + .probe = am654_ddrss_probe, + .priv_auto_alloc_size = sizeof(struct am654_ddrss_desc), +}; diff --git a/drivers/ram/k3-am654-ddrss.h b/drivers/ram/k3-am654-ddrss.h new file mode 100644 index 0000000000..78d73cd9fc --- /dev/null +++ b/drivers/ram/k3-am654-ddrss.h @@ -0,0 +1,1189 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * AM654: DDRSS Register definitions and structures. + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Lokesh Vutla <lokeshvutla@ti.com> + * + */ + +#ifndef __K3_AM654_DDRSS_H +#define __K3_AM654_DDRSS_H + +/* DDRSS subsystem wrapper logic registers */ +#define DDRSS_SS_ID_REV_REG 0x00000000 +#define DDRSS_SS_CTL_REG 0x00000004 +#define DDRSS_V2H_CTL_REG 0x00000020 + +#define SS_CTL_REG_CTL_ARST_SHIFT 0x0 +#define SS_CTL_REG_CTL_ARST_MASK BIT(SS_CTL_REG_CTL_ARST_SHIFT) + +/* DDRSS controller configuration registers */ +#define DDRSS_DDRCTL_MSTR 0x00000000 +#define DDRSS_DDRCTL_STAT 0x00000004 +#define DDRSS_DDRCTL_MRCTRL0 0x00000010 +#define DDRSS_DDRCTL_MRCTRL1 0x00000014 +#define DDRSS_DDRCTL_MRSTAT 0x00000018 +#define DDRSS_DDRCTL_MRCTRL2 0x0000001C +#define DDRSS_DDRCTL_DERATEEN 0x00000020 +#define DDRSS_DDRCTL_DERATEINT 0x00000024 +#define DDRSS_DDRCTL_MSTR2 0x00000028 +#define DDRSS_DDRCTL_PWRCTL 0x00000030 +#define DDRSS_DDRCTL_PWRTMG 0x00000034 +#define DDRSS_DDRCTL_HWLPCTL 0x00000038 +#define DDRSS_DDRCTL_RFSHCTL0 0x00000050 +#define DDRSS_DDRCTL_RFSHCTL1 0x00000054 +#define DDRSS_DDRCTL_RFSHCTL2 0x00000058 +#define DDRSS_DDRCTL_RFSHCTL3 0x00000060 +#define DDRSS_DDRCTL_RFSHTMG 0x00000064 +#define DDRSS_DDRCTL_ECCCFG0 0x00000070 +#define DDRSS_DDRCTL_ECCCFG1 0x00000074 +#define DDRSS_DDRCTL_ECCSTAT 0x00000078 +#define DDRSS_DDRCTL_ECCCLR 0x0000007C +#define DDRSS_DDRCTL_ECCERRCNT 0x00000080 +#define DDRSS_DDRCTL_ECCCADDR0 0x00000084 +#define DDRSS_DDRCTL_ECCCADDR1 0x00000088 +#define DDRSS_DDRCTL_ECCCSYN0 0x0000008C +#define DDRSS_DDRCTL_ECCCSYN2 0x00000094 +#define DDRSS_DDRCTL_ECCBITMASK0 0x00000098 +#define DDRSS_DDRCTL_ECCBITMASK2 0x000000A0 +#define DDRSS_DDRCTL_ECCUADDR0 0x000000A4 +#define DDRSS_DDRCTL_ECCUADDR1 0x000000A8 +#define DDRSS_DDRCTL_ECCUSYN0 0x000000AC +#define DDRSS_DDRCTL_ECCUSYN2 0x000000B4 +#define DDRSS_DDRCTL_ECCPOISONADDR0 0x000000B8 +#define DDRSS_DDRCTL_ECCPOISONADDR1 0x000000BC +#define DDRSS_DDRCTL_CRCPARCTL0 0x000000C0 +#define DDRSS_DDRCTL_CRCPARCTL1 0x000000C4 +#define DDRSS_DDRCTL_CRCPARCTL2 0x000000C8 +#define DDRSS_DDRCTL_CRCPARSTAT 0x000000CC +#define DDRSS_DDRCTL_INIT0 0x000000D0 +#define DDRSS_DDRCTL_INIT1 0x000000D4 +#define DDRSS_DDRCTL_INIT2 0x000000D8 +#define DDRSS_DDRCTL_INIT3 0x000000DC +#define DDRSS_DDRCTL_INIT4 0x000000E0 +#define DDRSS_DDRCTL_INIT5 0x000000E4 +#define DDRSS_DDRCTL_INIT6 0x000000E8 +#define DDRSS_DDRCTL_INIT7 0x000000EC +#define DDRSS_DDRCTL_DIMMCTL 0x000000F0 +#define DDRSS_DDRCTL_RANKCTL 0x000000F4 +#define DDRSS_DDRCTL_DRAMTMG0 0x00000100 +#define DDRSS_DDRCTL_DRAMTMG1 0x00000104 +#define DDRSS_DDRCTL_DRAMTMG2 0x00000108 +#define DDRSS_DDRCTL_DRAMTMG3 0x0000010C +#define DDRSS_DDRCTL_DRAMTMG4 0x00000110 +#define DDRSS_DDRCTL_DRAMTMG5 0x00000114 +#define DDRSS_DDRCTL_DRAMTMG6 0x00000118 +#define DDRSS_DDRCTL_DRAMTMG7 0x0000011C +#define DDRSS_DDRCTL_DRAMTMG8 0x00000120 +#define DDRSS_DDRCTL_DRAMTMG9 0x00000124 +#define DDRSS_DDRCTL_DRAMTMG10 0x00000128 +#define DDRSS_DDRCTL_DRAMTMG11 0x0000012C +#define DDRSS_DDRCTL_DRAMTMG12 0x00000130 +#define DDRSS_DDRCTL_DRAMTMG13 0x00000134 +#define DDRSS_DDRCTL_DRAMTMG14 0x00000138 +#define DDRSS_DDRCTL_DRAMTMG15 0x0000013C +#define DDRSS_DDRCTL_DRAMTMG17 0x00000144 +#define DDRSS_DDRCTL_ZQCTL0 0x00000180 +#define DDRSS_DDRCTL_ZQCTL1 0x00000184 +#define DDRSS_DDRCTL_ZQCTL2 0x00000188 +#define DDRSS_DDRCTL_ZQSTAT 0x0000018C +#define DDRSS_DDRCTL_DFITMG0 0x00000190 +#define DDRSS_DDRCTL_DFITMG1 0x00000194 +#define DDRSS_DDRCTL_DFILPCFG0 0x00000198 +#define DDRSS_DDRCTL_DFILPCFG1 0x0000019C +#define DDRSS_DDRCTL_DFIUPD0 0x000001A0 +#define DDRSS_DDRCTL_DFIUPD1 0x000001A4 +#define DDRSS_DDRCTL_DFIUPD2 0x000001A8 +#define DDRSS_DDRCTL_DFIMISC 0x000001B0 +#define DDRSS_DDRCTL_DFITMG2 0x000001B4 +#define DDRSS_DDRCTL_DFITMG3 0x000001B8 +#define DDRSS_DDRCTL_DFISTAT 0x000001BC +#define DDRSS_DDRCTL_DBICTL 0x000001C0 +#define DDRSS_DDRCTL_DFIPHYMSTR 0x000001C4 +#define DDRSS_DDRCTL_ADDRMAP0 0x00000200 +#define DDRSS_DDRCTL_ADDRMAP1 0x00000204 +#define DDRSS_DDRCTL_ADDRMAP2 0x00000208 +#define DDRSS_DDRCTL_ADDRMAP3 0x0000020C +#define DDRSS_DDRCTL_ADDRMAP4 0x00000210 +#define DDRSS_DDRCTL_ADDRMAP5 0x00000214 +#define DDRSS_DDRCTL_ADDRMAP6 0x00000218 +#define DDRSS_DDRCTL_ADDRMAP7 0x0000021C +#define DDRSS_DDRCTL_ADDRMAP8 0x00000220 +#define DDRSS_DDRCTL_ADDRMAP9 0x00000224 +#define DDRSS_DDRCTL_ADDRMAP10 0x00000228 +#define DDRSS_DDRCTL_ADDRMAP11 0x0000022C +#define DDRSS_DDRCTL_ODTCFG 0x00000240 +#define DDRSS_DDRCTL_ODTMAP 0x00000244 +#define DDRSS_DDRCTL_SCHED 0x00000250 +#define DDRSS_DDRCTL_SCHED1 0x00000254 +#define DDRSS_DDRCTL_PERFHPR1 0x0000025C +#define DDRSS_DDRCTL_PERFLPR1 0x00000264 +#define DDRSS_DDRCTL_PERFWR1 0x0000026C +#define DDRSS_DDRCTL_DQMAP0 0x00000280 +#define DDRSS_DDRCTL_DQMAP1 0x00000284 +#define DDRSS_DDRCTL_DQMAP4 0x00000290 +#define DDRSS_DDRCTL_DQMAP5 0x00000294 +#define DDRSS_DDRCTL_DBG0 0x00000300 +#define DDRSS_DDRCTL_DBG1 0x00000304 +#define DDRSS_DDRCTL_DBGCAM 0x00000308 +#define DDRSS_DDRCTL_DBGCMD 0x0000030C +#define DDRSS_DDRCTL_DBGSTAT 0x00000310 +#define DDRSS_DDRCTL_SWCTL 0x00000320 +#define DDRSS_DDRCTL_SWSTAT 0x00000324 +#define DDRSS_DDRCTL_ADVECCINDEX 0x00000374 +#define DDRSS_DDRCTL_ECCPOISONPAT0 0x0000037C +#define DDRSS_DDRCTL_ECCPOISONPAT2 0x00000384 +#define DDRSS_DDRCTL_CAPARPOISONCTL 0x000003A0 +#define DDRSS_DDRCTL_CAPARPOISONSTAT 0x000003A4 +#define DDRSS_DDRCTL_DERATEEN_SHDW 0x00002020 +#define DDRSS_DDRCTL_DERATEINT_SHDW 0x00002024 +#define DDRSS_DDRCTL_RFSHCTL0_SHDW 0x00002050 +#define DDRSS_DDRCTL_RFSHTMG_SHDW 0x00002064 +#define DDRSS_DDRCTL_INIT3_SHDW 0x000020DC +#define DDRSS_DDRCTL_INIT4_SHDW 0x000020E0 +#define DDRSS_DDRCTL_INIT6_SHDW 0x000020E8 +#define DDRSS_DDRCTL_INIT7_SHDW 0x000020EC +#define DDRSS_DDRCTL_DRAMTMG0_SHDW 0x00002100 +#define DDRSS_DDRCTL_DRAMTMG1_SHDW 0x00002104 +#define DDRSS_DDRCTL_DRAMTMG2_SHDW 0x00002108 +#define DDRSS_DDRCTL_DRAMTMG3_SHDW 0x0000210C +#define DDRSS_DDRCTL_DRAMTMG4_SHDW 0x00002110 +#define DDRSS_DDRCTL_DRAMTMG5_SHDW 0x00002114 +#define DDRSS_DDRCTL_DRAMTMG6_SHDW 0x00002118 +#define DDRSS_DDRCTL_DRAMTMG7_SHDW 0x0000211C +#define DDRSS_DDRCTL_DRAMTMG8_SHDW 0x00002120 +#define DDRSS_DDRCTL_DRAMTMG9_SHDW 0x00002124 +#define DDRSS_DDRCTL_DRAMTMG10_SHDW 0x00002128 +#define DDRSS_DDRCTL_DRAMTMG11_SHDW 0x0000212C +#define DDRSS_DDRCTL_DRAMTMG12_SHDW 0x00002130 +#define DDRSS_DDRCTL_DRAMTMG13_SHDW 0x00002134 +#define DDRSS_DDRCTL_DRAMTMG14_SHDW 0x00002138 +#define DDRSS_DDRCTL_DRAMTMG15_SHDW 0x0000213C +#define DDRSS_DDRCTL_ZQCTL0_SHDW 0x00002180 +#define DDRSS_DDRCTL_DFITMG0_SHDW 0x00002190 +#define DDRSS_DDRCTL_DFITMG1_SHDW 0x00002194 +#define DDRSS_DDRCTL_DFITMG2_SHDW 0x000021B4 +#define DDRSS_DDRCTL_DFITMG3_SHDW 0x000021B8 +#define DDRSS_DDRCTL_ODTCFG_SHDW 0x00002240 + +#define MSTR_DDR_TYPE_MASK GENMASK(5, 0) +#define DDR_TYPE_LPDDR4 0x20 +#define DDR_TYPE_DDR4 0x10 +#define DDR_TYPE_DDR3 0x1 + +#define DDR3_STAT_MODE_MASK GENMASK(1, 0) +#define DDR4_STAT_MODE_MASK GENMASK(2, 0) +#define DDR_MODE_NORMAL 0x1 + +/* DDRSS PHY configuration registers */ +#define DDRSS_DDRPHY_RIDR 0x00000000 +#define DDRSS_DDRPHY_PIR 0x00000004 +#define DDRSS_DDRPHY_PGCR0 0x00000010 +#define DDRSS_DDRPHY_PGCR1 0x00000014 +#define DDRSS_DDRPHY_PGCR2 0x00000018 +#define DDRSS_DDRPHY_PGCR3 0x0000001C +#define DDRSS_DDRPHY_PGCR4 0x00000020 +#define DDRSS_DDRPHY_PGCR5 0x00000024 +#define DDRSS_DDRPHY_PGCR6 0x00000028 +#define DDRSS_DDRPHY_PGCR7 0x0000002C +#define DDRSS_DDRPHY_PGSR0 0x00000030 +#define DDRSS_DDRPHY_PGSR1 0x00000034 +#define DDRSS_DDRPHY_PGSR2 0x00000038 +#define DDRSS_DDRPHY_PTR0 0x00000040 +#define DDRSS_DDRPHY_PTR1 0x00000044 +#define DDRSS_DDRPHY_PTR2 0x00000048 +#define DDRSS_DDRPHY_PTR3 0x0000004C +#define DDRSS_DDRPHY_PTR4 0x00000050 +#define DDRSS_DDRPHY_PTR5 0x00000054 +#define DDRSS_DDRPHY_PTR6 0x00000058 +#define DDRSS_DDRPHY_PLLCR0 0x00000068 +#define DDRSS_DDRPHY_PLLCR1 0x0000006C +#define DDRSS_DDRPHY_PLLCR2 0x00000070 +#define DDRSS_DDRPHY_PLLCR3 0x00000074 +#define DDRSS_DDRPHY_PLLCR4 0x00000078 +#define DDRSS_DDRPHY_PLLCR5 0x0000007C +#define DDRSS_DDRPHY_DXCCR 0x00000088 +#define DDRSS_DDRPHY_DSGCR 0x00000090 +#define DDRSS_DDRPHY_ODTCR 0x00000098 +#define DDRSS_DDRPHY_AACR 0x000000A0 +#define DDRSS_DDRPHY_GPR0 0x000000C0 +#define DDRSS_DDRPHY_GPR1 0x000000C4 +#define DDRSS_DDRPHY_DCR 0x00000100 +#define DDRSS_DDRPHY_DTPR0 0x00000110 +#define DDRSS_DDRPHY_DTPR1 0x00000114 +#define DDRSS_DDRPHY_DTPR2 0x00000118 +#define DDRSS_DDRPHY_DTPR3 0x0000011C +#define DDRSS_DDRPHY_DTPR4 0x00000120 +#define DDRSS_DDRPHY_DTPR5 0x00000124 +#define DDRSS_DDRPHY_DTPR6 0x00000128 +#define DDRSS_DDRPHY_RDIMMGCR0 0x00000140 +#define DDRSS_DDRPHY_RDIMMGCR1 0x00000144 +#define DDRSS_DDRPHY_RDIMMGCR2 0x00000148 +#define DDRSS_DDRPHY_RDIMMCR0 0x00000150 +#define DDRSS_DDRPHY_RDIMMCR1 0x00000154 +#define DDRSS_DDRPHY_RDIMMCR2 0x00000158 +#define DDRSS_DDRPHY_RDIMMCR3 0x0000015C +#define DDRSS_DDRPHY_RDIMMCR4 0x00000160 +#define DDRSS_DDRPHY_SCHCR0 0x00000168 +#define DDRSS_DDRPHY_SCHCR1 0x0000016C +#define DDRSS_DDRPHY_MR0 0x00000180 +#define DDRSS_DDRPHY_MR1 0x00000184 +#define DDRSS_DDRPHY_MR2 0x00000188 +#define DDRSS_DDRPHY_MR3 0x0000018C +#define DDRSS_DDRPHY_MR4 0x00000190 +#define DDRSS_DDRPHY_MR5 0x00000194 +#define DDRSS_DDRPHY_MR6 0x00000198 +#define DDRSS_DDRPHY_MR7 0x0000019C +#define DDRSS_DDRPHY_MR11 0x000001AC +#define DDRSS_DDRPHY_MR12 0x000001B0 +#define DDRSS_DDRPHY_MR13 0x000001B4 +#define DDRSS_DDRPHY_MR14 0x000001B8 +#define DDRSS_DDRPHY_MR22 0x000001D8 +#define DDRSS_DDRPHY_DTCR0 0x00000200 +#define DDRSS_DDRPHY_DTCR1 0x00000204 +#define DDRSS_DDRPHY_DTAR0 0x00000208 +#define DDRSS_DDRPHY_DTAR1 0x0000020C +#define DDRSS_DDRPHY_DTAR2 0x00000210 +#define DDRSS_DDRPHY_DTDR0 0x00000218 +#define DDRSS_DDRPHY_DTDR1 0x0000021C +#define DDRSS_DDRPHY_DTEDR0 0x00000230 +#define DDRSS_DDRPHY_DTEDR1 0x00000234 +#define DDRSS_DDRPHY_DTEDR2 0x00000238 +#define DDRSS_DDRPHY_VTDR 0x0000023C +#define DDRSS_DDRPHY_CATR0 0x00000240 +#define DDRSS_DDRPHY_CATR1 0x00000244 +#define DDRSS_DDRPHY_PGCR8 0x00000248 +#define DDRSS_DDRPHY_DQSDR0 0x00000250 +#define DDRSS_DDRPHY_DQSDR1 0x00000254 +#define DDRSS_DDRPHY_DQSDR2 0x00000258 +#define DDRSS_DDRPHY_DCUAR 0x00000300 +#define DDRSS_DDRPHY_DCUDR 0x00000304 +#define DDRSS_DDRPHY_DCURR 0x00000308 +#define DDRSS_DDRPHY_DCULR 0x0000030C +#define DDRSS_DDRPHY_DCUGCR 0x00000310 +#define DDRSS_DDRPHY_DCUTPR 0x00000314 +#define DDRSS_DDRPHY_DCUSR0 0x00000318 +#define DDRSS_DDRPHY_DCUSR1 0x0000031C +#define DDRSS_DDRPHY_BISTRR 0x00000400 +#define DDRSS_DDRPHY_BISTWCR 0x00000404 +#define DDRSS_DDRPHY_BISTMSKR0 0x00000408 +#define DDRSS_DDRPHY_BISTMSKR1 0x0000040C +#define DDRSS_DDRPHY_BISTMSKR2 0x00000410 +#define DDRSS_DDRPHY_BISTLSR 0x00000414 +#define DDRSS_DDRPHY_BISTAR0 0x00000418 +#define DDRSS_DDRPHY_BISTAR1 0x0000041C +#define DDRSS_DDRPHY_BISTAR2 0x00000420 +#define DDRSS_DDRPHY_BISTAR3 0x00000424 +#define DDRSS_DDRPHY_BISTAR4 0x00000428 +#define DDRSS_DDRPHY_BISTUDPR 0x0000042C +#define DDRSS_DDRPHY_BISTGSR 0x00000430 +#define DDRSS_DDRPHY_BISTWER0 0x00000434 +#define DDRSS_DDRPHY_BISTWER1 0x00000438 +#define DDRSS_DDRPHY_BISTBER0 0x0000043C +#define DDRSS_DDRPHY_BISTBER1 0x00000440 +#define DDRSS_DDRPHY_BISTBER2 0x00000444 +#define DDRSS_DDRPHY_BISTBER3 0x00000448 +#define DDRSS_DDRPHY_BISTBER4 0x0000044C +#define DDRSS_DDRPHY_BISTWCSR 0x00000450 +#define DDRSS_DDRPHY_BISTFWR0 0x00000454 +#define DDRSS_DDRPHY_BISTFWR1 0x00000458 +#define DDRSS_DDRPHY_BISTFWR2 0x0000045C +#define DDRSS_DDRPHY_BISTBER5 0x00000460 +#define DDRSS_DDRPHY_RANKIDR 0x000004DC +#define DDRSS_DDRPHY_RIOCR0 0x000004E0 +#define DDRSS_DDRPHY_RIOCR1 0x000004E4 +#define DDRSS_DDRPHY_RIOCR2 0x000004E8 +#define DDRSS_DDRPHY_RIOCR3 0x000004EC +#define DDRSS_DDRPHY_RIOCR4 0x000004F0 +#define DDRSS_DDRPHY_RIOCR5 0x000004F4 +#define DDRSS_DDRPHY_ACIOCR0 0x00000500 +#define DDRSS_DDRPHY_ACIOCR1 0x00000504 +#define DDRSS_DDRPHY_ACIOCR2 0x00000508 +#define DDRSS_DDRPHY_ACIOCR3 0x0000050C +#define DDRSS_DDRPHY_ACIOCR4 0x00000510 +#define DDRSS_DDRPHY_ACIOCR5 0x00000514 +#define DDRSS_DDRPHY_IOVCR0 0x00000520 +#define DDRSS_DDRPHY_IOVCR1 0x00000524 +#define DDRSS_DDRPHY_VTCR0 0x00000528 +#define DDRSS_DDRPHY_VTCR1 0x0000052C +#define DDRSS_DDRPHY_ACBDLR0 0x00000540 +#define DDRSS_DDRPHY_ACBDLR1 0x00000544 +#define DDRSS_DDRPHY_ACBDLR2 0x00000548 +#define DDRSS_DDRPHY_ACBDLR3 0x0000054C +#define DDRSS_DDRPHY_ACBDLR4 0x00000550 +#define DDRSS_DDRPHY_ACBDLR5 0x00000554 +#define DDRSS_DDRPHY_ACBDLR6 0x00000558 +#define DDRSS_DDRPHY_ACBDLR7 0x0000055C +#define DDRSS_DDRPHY_ACBDLR8 0x00000560 +#define DDRSS_DDRPHY_ACBDLR9 0x00000564 +#define DDRSS_DDRPHY_ACBDLR10 0x00000568 +#define DDRSS_DDRPHY_ACBDLR11 0x0000056C +#define DDRSS_DDRPHY_ACBDLR12 0x00000570 +#define DDRSS_DDRPHY_ACBDLR13 0x00000574 +#define DDRSS_DDRPHY_ACBDLR14 0x00000578 +#define DDRSS_DDRPHY_ACBDLR15 0x0000057C +#define DDRSS_DDRPHY_ACBDLR16 0x00000580 +#define DDRSS_DDRPHY_ACLCDLR 0x00000584 +#define DDRSS_DDRPHY_ACMDLR0 0x000005A0 +#define DDRSS_DDRPHY_ACMDLR1 0x000005A4 +#define DDRSS_DDRPHY_ZQCR 0x00000680 +#define DDRSS_DDRPHY_ZQ0PR0 0x00000684 +#define DDRSS_DDRPHY_ZQ0PR1 0x00000688 +#define DDRSS_DDRPHY_ZQ0DR0 0x0000068C +#define DDRSS_DDRPHY_ZQ0DR1 0x00000690 +#define DDRSS_DDRPHY_ZQ0OR0 0x00000694 +#define DDRSS_DDRPHY_ZQ0OR1 0x00000698 +#define DDRSS_DDRPHY_ZQ0SR 0x0000069C +#define DDRSS_DDRPHY_ZQ1PR0 0x000006A4 +#define DDRSS_DDRPHY_ZQ1PR1 0x000006A8 +#define DDRSS_DDRPHY_ZQ1DR0 0x000006AC +#define DDRSS_DDRPHY_ZQ1DR1 0x000006B0 +#define DDRSS_DDRPHY_ZQ1OR0 0x000006B4 +#define DDRSS_DDRPHY_ZQ1OR1 0x000006B8 +#define DDRSS_DDRPHY_ZQ1SR 0x000006BC +#define DDRSS_DDRPHY_ZQ2PR0 0x000006C4 +#define DDRSS_DDRPHY_ZQ2PR1 0x000006C8 +#define DDRSS_DDRPHY_ZQ2DR0 0x000006CC +#define DDRSS_DDRPHY_ZQ2DR1 0x000006D0 +#define DDRSS_DDRPHY_ZQ2OR0 0x000006D4 +#define DDRSS_DDRPHY_ZQ2OR1 0x000006D8 +#define DDRSS_DDRPHY_ZQ2SR 0x000006DC +#define DDRSS_DDRPHY_ZQ3PR0 0x000006E4 +#define DDRSS_DDRPHY_ZQ3PR1 0x000006E8 +#define DDRSS_DDRPHY_ZQ3DR0 0x000006EC +#define DDRSS_DDRPHY_ZQ3DR1 0x000006F0 +#define DDRSS_DDRPHY_ZQ3OR0 0x000006F4 +#define DDRSS_DDRPHY_ZQ3OR1 0x000006F8 +#define DDRSS_DDRPHY_ZQ3SR 0x000006FC +#define DDRSS_DDRPHY_DX0GCR0 0x00000700 +#define DDRSS_DDRPHY_DX0GCR1 0x00000704 +#define DDRSS_DDRPHY_DX0GCR2 0x00000708 +#define DDRSS_DDRPHY_DX0GCR3 0x0000070C +#define DDRSS_DDRPHY_DX0GCR4 0x00000710 +#define DDRSS_DDRPHY_DX0GCR5 0x00000714 +#define DDRSS_DDRPHY_DX0GCR6 0x00000718 +#define DDRSS_DDRPHY_DX0GCR7 0x0000071C +#define DDRSS_DDRPHY_DX0GCR8 0x00000720 +#define DDRSS_DDRPHY_DX0GCR9 0x00000724 +#define DDRSS_DDRPHY_DX0DQMAP0 0x00000728 +#define DDRSS_DDRPHY_DX0DQMAP1 0x0000072C +#define DDRSS_DDRPHY_DX0BDLR0 0x00000740 +#define DDRSS_DDRPHY_DX0BDLR1 0x00000744 +#define DDRSS_DDRPHY_DX0BDLR2 0x00000748 +#define DDRSS_DDRPHY_DX0BDLR3 0x00000750 +#define DDRSS_DDRPHY_DX0BDLR4 0x00000754 +#define DDRSS_DDRPHY_DX0BDLR5 0x00000758 +#define DDRSS_DDRPHY_DX0BDLR6 0x00000760 +#define DDRSS_DDRPHY_DX0BDLR7 0x00000764 +#define DDRSS_DDRPHY_DX0BDLR8 0x00000768 +#define DDRSS_DDRPHY_DX0BDLR9 0x0000076C +#define DDRSS_DDRPHY_DX0LCDLR0 0x00000780 +#define DDRSS_DDRPHY_DX0LCDLR1 0x00000784 +#define DDRSS_DDRPHY_DX0LCDLR2 0x00000788 +#define DDRSS_DDRPHY_DX0LCDLR3 0x0000078C +#define DDRSS_DDRPHY_DX0LCDLR4 0x00000790 +#define DDRSS_DDRPHY_DX0LCDLR5 0x00000794 +#define DDRSS_DDRPHY_DX0MDLR0 0x000007A0 +#define DDRSS_DDRPHY_DX0MDLR1 0x000007A4 +#define DDRSS_DDRPHY_DX0GTR0 0x000007C0 +#define DDRSS_DDRPHY_DX0RSR0 0x000007D0 +#define DDRSS_DDRPHY_DX0RSR1 0x000007D4 +#define DDRSS_DDRPHY_DX0RSR2 0x000007D8 +#define DDRSS_DDRPHY_DX0RSR3 0x000007DC +#define DDRSS_DDRPHY_DX0GSR0 0x000007E0 +#define DDRSS_DDRPHY_DX0GSR1 0x000007E4 +#define DDRSS_DDRPHY_DX0GSR2 0x000007E8 +#define DDRSS_DDRPHY_DX0GSR3 0x000007EC +#define DDRSS_DDRPHY_DX0GSR4 0x000007F0 +#define DDRSS_DDRPHY_DX0GSR5 0x000007F4 +#define DDRSS_DDRPHY_DX0GSR6 0x000007F8 +#define DDRSS_DDRPHY_DX1GCR0 0x00000800 +#define DDRSS_DDRPHY_DX1GCR1 0x00000804 +#define DDRSS_DDRPHY_DX1GCR2 0x00000808 +#define DDRSS_DDRPHY_DX1GCR3 0x0000080C +#define DDRSS_DDRPHY_DX1GCR4 0x00000810 +#define DDRSS_DDRPHY_DX1GCR5 0x00000814 +#define DDRSS_DDRPHY_DX1GCR6 0x00000818 +#define DDRSS_DDRPHY_DX1GCR7 0x0000081C +#define DDRSS_DDRPHY_DX1GCR8 0x00000820 +#define DDRSS_DDRPHY_DX1GCR9 0x00000824 +#define DDRSS_DDRPHY_DX1DQMAP0 0x00000828 +#define DDRSS_DDRPHY_DX1DQMAP1 0x0000082C +#define DDRSS_DDRPHY_DX1BDLR0 0x00000840 +#define DDRSS_DDRPHY_DX1BDLR1 0x00000844 +#define DDRSS_DDRPHY_DX1BDLR2 0x00000848 +#define DDRSS_DDRPHY_DX1BDLR3 0x00000850 +#define DDRSS_DDRPHY_DX1BDLR4 0x00000854 +#define DDRSS_DDRPHY_DX1BDLR5 0x00000858 +#define DDRSS_DDRPHY_DX1BDLR6 0x00000860 +#define DDRSS_DDRPHY_DX1BDLR7 0x00000864 +#define DDRSS_DDRPHY_DX1BDLR8 0x00000868 +#define DDRSS_DDRPHY_DX1BDLR9 0x0000086C +#define DDRSS_DDRPHY_DX1LCDLR0 0x00000880 +#define DDRSS_DDRPHY_DX1LCDLR1 0x00000884 +#define DDRSS_DDRPHY_DX1LCDLR2 0x00000888 +#define DDRSS_DDRPHY_DX1LCDLR3 0x0000088C +#define DDRSS_DDRPHY_DX1LCDLR4 0x00000890 +#define DDRSS_DDRPHY_DX1LCDLR5 0x00000894 +#define DDRSS_DDRPHY_DX1MDLR0 0x000008A0 +#define DDRSS_DDRPHY_DX1MDLR1 0x000008A4 +#define DDRSS_DDRPHY_DX1GTR0 0x000008C0 +#define DDRSS_DDRPHY_DX1RSR0 0x000008D0 +#define DDRSS_DDRPHY_DX1RSR1 0x000008D4 +#define DDRSS_DDRPHY_DX1RSR2 0x000008D8 +#define DDRSS_DDRPHY_DX1RSR3 0x000008DC +#define DDRSS_DDRPHY_DX1GSR0 0x000008E0 +#define DDRSS_DDRPHY_DX1GSR1 0x000008E4 +#define DDRSS_DDRPHY_DX1GSR2 0x000008E8 +#define DDRSS_DDRPHY_DX1GSR3 0x000008EC +#define DDRSS_DDRPHY_DX1GSR4 0x000008F0 +#define DDRSS_DDRPHY_DX1GSR5 0x000008F4 +#define DDRSS_DDRPHY_DX1GSR6 0x000008F8 +#define DDRSS_DDRPHY_DX2GCR0 0x00000900 +#define DDRSS_DDRPHY_DX2GCR1 0x00000904 +#define DDRSS_DDRPHY_DX2GCR2 0x00000908 +#define DDRSS_DDRPHY_DX2GCR3 0x0000090C +#define DDRSS_DDRPHY_DX2GCR4 0x00000910 +#define DDRSS_DDRPHY_DX2GCR5 0x00000914 +#define DDRSS_DDRPHY_DX2GCR6 0x00000918 +#define DDRSS_DDRPHY_DX2GCR7 0x0000091C +#define DDRSS_DDRPHY_DX2GCR8 0x00000920 +#define DDRSS_DDRPHY_DX2GCR9 0x00000924 +#define DDRSS_DDRPHY_DX2DQMAP0 0x00000928 +#define DDRSS_DDRPHY_DX2DQMAP1 0x0000092C +#define DDRSS_DDRPHY_DX2BDLR0 0x00000940 +#define DDRSS_DDRPHY_DX2BDLR1 0x00000944 +#define DDRSS_DDRPHY_DX2BDLR2 0x00000948 +#define DDRSS_DDRPHY_DX2BDLR3 0x00000950 +#define DDRSS_DDRPHY_DX2BDLR4 0x00000954 +#define DDRSS_DDRPHY_DX2BDLR5 0x00000958 +#define DDRSS_DDRPHY_DX2BDLR6 0x00000960 +#define DDRSS_DDRPHY_DX2BDLR7 0x00000964 +#define DDRSS_DDRPHY_DX2BDLR8 0x00000968 +#define DDRSS_DDRPHY_DX2BDLR9 0x0000096C +#define DDRSS_DDRPHY_DX2LCDLR0 0x00000980 +#define DDRSS_DDRPHY_DX2LCDLR1 0x00000984 +#define DDRSS_DDRPHY_DX2LCDLR2 0x00000988 +#define DDRSS_DDRPHY_DX2LCDLR3 0x0000098C +#define DDRSS_DDRPHY_DX2LCDLR4 0x00000990 +#define DDRSS_DDRPHY_DX2LCDLR5 0x00000994 +#define DDRSS_DDRPHY_DX2MDLR0 0x000009A0 +#define DDRSS_DDRPHY_DX2MDLR1 0x000009A4 +#define DDRSS_DDRPHY_DX2GTR0 0x000009C0 +#define DDRSS_DDRPHY_DX2RSR0 0x000009D0 +#define DDRSS_DDRPHY_DX2RSR1 0x000009D4 +#define DDRSS_DDRPHY_DX2RSR2 0x000009D8 +#define DDRSS_DDRPHY_DX2RSR3 0x000009DC +#define DDRSS_DDRPHY_DX2GSR0 0x000009E0 +#define DDRSS_DDRPHY_DX2GSR1 0x000009E4 +#define DDRSS_DDRPHY_DX2GSR2 0x000009E8 +#define DDRSS_DDRPHY_DX2GSR3 0x000009EC +#define DDRSS_DDRPHY_DX2GSR4 0x000009F0 +#define DDRSS_DDRPHY_DX2GSR5 0x000009F4 +#define DDRSS_DDRPHY_DX2GSR6 0x000009F8 +#define DDRSS_DDRPHY_DX3GCR0 0x00000A00 +#define DDRSS_DDRPHY_DX3GCR1 0x00000A04 +#define DDRSS_DDRPHY_DX3GCR2 0x00000A08 +#define DDRSS_DDRPHY_DX3GCR3 0x00000A0C +#define DDRSS_DDRPHY_DX3GCR4 0x00000A10 +#define DDRSS_DDRPHY_DX3GCR5 0x00000A14 +#define DDRSS_DDRPHY_DX3GCR6 0x00000A18 +#define DDRSS_DDRPHY_DX3GCR7 0x00000A1C +#define DDRSS_DDRPHY_DX3GCR8 0x00000A20 +#define DDRSS_DDRPHY_DX3GCR9 0x00000A24 +#define DDRSS_DDRPHY_DX3DQMAP0 0x00000A28 +#define DDRSS_DDRPHY_DX3DQMAP1 0x00000A2C +#define DDRSS_DDRPHY_DX3BDLR0 0x00000A40 +#define DDRSS_DDRPHY_DX3BDLR1 0x00000A44 +#define DDRSS_DDRPHY_DX3BDLR2 0x00000A48 +#define DDRSS_DDRPHY_DX3BDLR3 0x00000A50 +#define DDRSS_DDRPHY_DX3BDLR4 0x00000A54 +#define DDRSS_DDRPHY_DX3BDLR5 0x00000A58 +#define DDRSS_DDRPHY_DX3BDLR6 0x00000A60 +#define DDRSS_DDRPHY_DX3BDLR7 0x00000A64 +#define DDRSS_DDRPHY_DX3BDLR8 0x00000A68 +#define DDRSS_DDRPHY_DX3BDLR9 0x00000A6C +#define DDRSS_DDRPHY_DX3LCDLR0 0x00000A80 +#define DDRSS_DDRPHY_DX3LCDLR1 0x00000A84 +#define DDRSS_DDRPHY_DX3LCDLR2 0x00000A88 +#define DDRSS_DDRPHY_DX3LCDLR3 0x00000A8C +#define DDRSS_DDRPHY_DX3LCDLR4 0x00000A90 +#define DDRSS_DDRPHY_DX3LCDLR5 0x00000A94 +#define DDRSS_DDRPHY_DX3MDLR0 0x00000AA0 +#define DDRSS_DDRPHY_DX3MDLR1 0x00000AA4 +#define DDRSS_DDRPHY_DX3GTR0 0x00000AC0 +#define DDRSS_DDRPHY_DX3RSR0 0x00000AD0 +#define DDRSS_DDRPHY_DX3RSR1 0x00000AD4 +#define DDRSS_DDRPHY_DX3RSR2 0x00000AD8 +#define DDRSS_DDRPHY_DX3RSR3 0x00000ADC +#define DDRSS_DDRPHY_DX3GSR0 0x00000AE0 +#define DDRSS_DDRPHY_DX3GSR1 0x00000AE4 +#define DDRSS_DDRPHY_DX3GSR2 0x00000AE8 +#define DDRSS_DDRPHY_DX3GSR3 0x00000AEC +#define DDRSS_DDRPHY_DX3GSR4 0x00000AF0 +#define DDRSS_DDRPHY_DX3GSR5 0x00000AF4 +#define DDRSS_DDRPHY_DX3GSR6 0x00000AF8 +#define DDRSS_DDRPHY_DX4GCR0 0x00000B00 +#define DDRSS_DDRPHY_DX4GCR1 0x00000B04 +#define DDRSS_DDRPHY_DX4GCR2 0x00000B08 +#define DDRSS_DDRPHY_DX4GCR3 0x00000B0C +#define DDRSS_DDRPHY_DX4GCR4 0x00000B10 +#define DDRSS_DDRPHY_DX4GCR5 0x00000B14 +#define DDRSS_DDRPHY_DX4GCR6 0x00000B18 +#define DDRSS_DDRPHY_DX4GCR7 0x00000B1C +#define DDRSS_DDRPHY_DX4GCR8 0x00000B20 +#define DDRSS_DDRPHY_DX4GCR9 0x00000B24 +#define DDRSS_DDRPHY_DX4DQMAP0 0x00000B28 +#define DDRSS_DDRPHY_DX4DQMAP1 0x00000B2C +#define DDRSS_DDRPHY_DX4BDLR0 0x00000B40 +#define DDRSS_DDRPHY_DX4BDLR1 0x00000B44 +#define DDRSS_DDRPHY_DX4BDLR2 0x00000B48 +#define DDRSS_DDRPHY_DX4BDLR3 0x00000B50 +#define DDRSS_DDRPHY_DX4BDLR4 0x00000B54 +#define DDRSS_DDRPHY_DX4BDLR5 0x00000B58 +#define DDRSS_DDRPHY_DX4BDLR6 0x00000B60 +#define DDRSS_DDRPHY_DX4BDLR7 0x00000B64 +#define DDRSS_DDRPHY_DX4BDLR8 0x00000B68 +#define DDRSS_DDRPHY_DX4BDLR9 0x00000B6C +#define DDRSS_DDRPHY_DX4LCDLR0 0x00000B80 +#define DDRSS_DDRPHY_DX4LCDLR1 0x00000B84 +#define DDRSS_DDRPHY_DX4LCDLR2 0x00000B88 +#define DDRSS_DDRPHY_DX4LCDLR3 0x00000B8C +#define DDRSS_DDRPHY_DX4LCDLR4 0x00000B90 +#define DDRSS_DDRPHY_DX4LCDLR5 0x00000B94 +#define DDRSS_DDRPHY_DX4MDLR0 0x00000BA0 +#define DDRSS_DDRPHY_DX4MDLR1 0x00000BA4 +#define DDRSS_DDRPHY_DX4GTR0 0x00000BC0 +#define DDRSS_DDRPHY_DX4RSR0 0x00000BD0 +#define DDRSS_DDRPHY_DX4RSR1 0x00000BD4 +#define DDRSS_DDRPHY_DX4RSR2 0x00000BD8 +#define DDRSS_DDRPHY_DX4RSR3 0x00000BDC +#define DDRSS_DDRPHY_DX4GSR0 0x00000BE0 +#define DDRSS_DDRPHY_DX4GSR1 0x00000BE4 +#define DDRSS_DDRPHY_DX4GSR2 0x00000BE8 +#define DDRSS_DDRPHY_DX4GSR3 0x00000BEC +#define DDRSS_DDRPHY_DX4GSR4 0x00000BF0 +#define DDRSS_DDRPHY_DX4GSR5 0x00000BF4 +#define DDRSS_DDRPHY_DX4GSR6 0x00000BF8 +#define DDRSS_DDRPHY_DX5GCR0 0x00000C00 +#define DDRSS_DDRPHY_DX5GCR1 0x00000C04 +#define DDRSS_DDRPHY_DX5GCR2 0x00000C08 +#define DDRSS_DDRPHY_DX5GCR3 0x00000C0C +#define DDRSS_DDRPHY_DX5GCR4 0x00000C10 +#define DDRSS_DDRPHY_DX5GCR5 0x00000C14 +#define DDRSS_DDRPHY_DX5GCR6 0x00000C18 +#define DDRSS_DDRPHY_DX5GCR7 0x00000C1C +#define DDRSS_DDRPHY_DX5GCR8 0x00000C20 +#define DDRSS_DDRPHY_DX5GCR9 0x00000C24 +#define DDRSS_DDRPHY_DX5DQMAP0 0x00000C28 +#define DDRSS_DDRPHY_DX5DQMAP1 0x00000C2C +#define DDRSS_DDRPHY_DX5BDLR0 0x00000C40 +#define DDRSS_DDRPHY_DX5BDLR1 0x00000C44 +#define DDRSS_DDRPHY_DX5BDLR2 0x00000C48 +#define DDRSS_DDRPHY_DX5BDLR3 0x00000C50 +#define DDRSS_DDRPHY_DX5BDLR4 0x00000C54 +#define DDRSS_DDRPHY_DX5BDLR5 0x00000C58 +#define DDRSS_DDRPHY_DX5BDLR6 0x00000C60 +#define DDRSS_DDRPHY_DX5BDLR7 0x00000C64 +#define DDRSS_DDRPHY_DX5BDLR8 0x00000C68 +#define DDRSS_DDRPHY_DX5BDLR9 0x00000C6C +#define DDRSS_DDRPHY_DX5LCDLR0 0x00000C80 +#define DDRSS_DDRPHY_DX5LCDLR1 0x00000C84 +#define DDRSS_DDRPHY_DX5LCDLR2 0x00000C88 +#define DDRSS_DDRPHY_DX5LCDLR3 0x00000C8C +#define DDRSS_DDRPHY_DX5LCDLR4 0x00000C90 +#define DDRSS_DDRPHY_DX5LCDLR5 0x00000C94 +#define DDRSS_DDRPHY_DX5MDLR0 0x00000CA0 +#define DDRSS_DDRPHY_DX5MDLR1 0x00000CA4 +#define DDRSS_DDRPHY_DX5GTR0 0x00000CC0 +#define DDRSS_DDRPHY_DX5RSR0 0x00000CD0 +#define DDRSS_DDRPHY_DX5RSR1 0x00000CD4 +#define DDRSS_DDRPHY_DX5RSR2 0x00000CD8 +#define DDRSS_DDRPHY_DX5RSR3 0x00000CDC +#define DDRSS_DDRPHY_DX5GSR0 0x00000CE0 +#define DDRSS_DDRPHY_DX5GSR1 0x00000CE4 +#define DDRSS_DDRPHY_DX5GSR2 0x00000CE8 +#define DDRSS_DDRPHY_DX5GSR3 0x00000CEC +#define DDRSS_DDRPHY_DX5GSR4 0x00000CF0 +#define DDRSS_DDRPHY_DX5GSR5 0x00000CF4 +#define DDRSS_DDRPHY_DX5GSR6 0x00000CF8 +#define DDRSS_DDRPHY_DX6GCR0 0x00000D00 +#define DDRSS_DDRPHY_DX6GCR1 0x00000D04 +#define DDRSS_DDRPHY_DX6GCR2 0x00000D08 +#define DDRSS_DDRPHY_DX6GCR3 0x00000D0C +#define DDRSS_DDRPHY_DX6GCR4 0x00000D10 +#define DDRSS_DDRPHY_DX6GCR5 0x00000D14 +#define DDRSS_DDRPHY_DX6GCR6 0x00000D18 +#define DDRSS_DDRPHY_DX6GCR7 0x00000D1C +#define DDRSS_DDRPHY_DX6GCR8 0x00000D20 +#define DDRSS_DDRPHY_DX6GCR9 0x00000D24 +#define DDRSS_DDRPHY_DX6DQMAP0 0x00000D28 +#define DDRSS_DDRPHY_DX6DQMAP1 0x00000D2C +#define DDRSS_DDRPHY_DX6BDLR0 0x00000D40 +#define DDRSS_DDRPHY_DX6BDLR1 0x00000D44 +#define DDRSS_DDRPHY_DX6BDLR2 0x00000D48 +#define DDRSS_DDRPHY_DX6BDLR3 0x00000D50 +#define DDRSS_DDRPHY_DX6BDLR4 0x00000D54 +#define DDRSS_DDRPHY_DX6BDLR5 0x00000D58 +#define DDRSS_DDRPHY_DX6BDLR6 0x00000D60 +#define DDRSS_DDRPHY_DX6BDLR7 0x00000D64 +#define DDRSS_DDRPHY_DX6BDLR8 0x00000D68 +#define DDRSS_DDRPHY_DX6BDLR9 0x00000D6C +#define DDRSS_DDRPHY_DX6LCDLR0 0x00000D80 +#define DDRSS_DDRPHY_DX6LCDLR1 0x00000D84 +#define DDRSS_DDRPHY_DX6LCDLR2 0x00000D88 +#define DDRSS_DDRPHY_DX6LCDLR3 0x00000D8C +#define DDRSS_DDRPHY_DX6LCDLR4 0x00000D90 +#define DDRSS_DDRPHY_DX6LCDLR5 0x00000D94 +#define DDRSS_DDRPHY_DX6MDLR0 0x00000DA0 +#define DDRSS_DDRPHY_DX6MDLR1 0x00000DA4 +#define DDRSS_DDRPHY_DX6GTR0 0x00000DC0 +#define DDRSS_DDRPHY_DX6RSR0 0x00000DD0 +#define DDRSS_DDRPHY_DX6RSR1 0x00000DD4 +#define DDRSS_DDRPHY_DX6RSR2 0x00000DD8 +#define DDRSS_DDRPHY_DX6RSR3 0x00000DDC +#define DDRSS_DDRPHY_DX6GSR0 0x00000DE0 +#define DDRSS_DDRPHY_DX6GSR1 0x00000DE4 +#define DDRSS_DDRPHY_DX6GSR2 0x00000DE8 +#define DDRSS_DDRPHY_DX6GSR3 0x00000DEC +#define DDRSS_DDRPHY_DX6GSR4 0x00000DF0 +#define DDRSS_DDRPHY_DX6GSR5 0x00000DF4 +#define DDRSS_DDRPHY_DX6GSR6 0x00000DF8 +#define DDRSS_DDRPHY_DX7GCR0 0x00000E00 +#define DDRSS_DDRPHY_DX7GCR1 0x00000E04 +#define DDRSS_DDRPHY_DX7GCR2 0x00000E08 +#define DDRSS_DDRPHY_DX7GCR3 0x00000E0C +#define DDRSS_DDRPHY_DX7GCR4 0x00000E10 +#define DDRSS_DDRPHY_DX7GCR5 0x00000E14 +#define DDRSS_DDRPHY_DX7GCR6 0x00000E18 +#define DDRSS_DDRPHY_DX7GCR7 0x00000E1C +#define DDRSS_DDRPHY_DX7GCR8 0x00000E20 +#define DDRSS_DDRPHY_DX7GCR9 0x00000E24 +#define DDRSS_DDRPHY_DX7DQMAP0 0x00000E28 +#define DDRSS_DDRPHY_DX7DQMAP1 0x00000E2C +#define DDRSS_DDRPHY_DX7BDLR0 0x00000E40 +#define DDRSS_DDRPHY_DX7BDLR1 0x00000E44 +#define DDRSS_DDRPHY_DX7BDLR2 0x00000E48 +#define DDRSS_DDRPHY_DX7BDLR3 0x00000E50 +#define DDRSS_DDRPHY_DX7BDLR4 0x00000E54 +#define DDRSS_DDRPHY_DX7BDLR5 0x00000E58 +#define DDRSS_DDRPHY_DX7BDLR6 0x00000E60 +#define DDRSS_DDRPHY_DX7BDLR7 0x00000E64 +#define DDRSS_DDRPHY_DX7BDLR8 0x00000E68 +#define DDRSS_DDRPHY_DX7BDLR9 0x00000E6C +#define DDRSS_DDRPHY_DX7LCDLR0 0x00000E80 +#define DDRSS_DDRPHY_DX7LCDLR1 0x00000E84 +#define DDRSS_DDRPHY_DX7LCDLR2 0x00000E88 +#define DDRSS_DDRPHY_DX7LCDLR3 0x00000E8C +#define DDRSS_DDRPHY_DX7LCDLR4 0x00000E90 +#define DDRSS_DDRPHY_DX7LCDLR5 0x00000E94 +#define DDRSS_DDRPHY_DX7MDLR0 0x00000EA0 +#define DDRSS_DDRPHY_DX7MDLR1 0x00000EA4 +#define DDRSS_DDRPHY_DX7GTR0 0x00000EC0 +#define DDRSS_DDRPHY_DX7RSR0 0x00000ED0 +#define DDRSS_DDRPHY_DX7RSR1 0x00000ED4 +#define DDRSS_DDRPHY_DX7RSR2 0x00000ED8 +#define DDRSS_DDRPHY_DX7RSR3 0x00000EDC +#define DDRSS_DDRPHY_DX7GSR0 0x00000EE0 +#define DDRSS_DDRPHY_DX7GSR1 0x00000EE4 +#define DDRSS_DDRPHY_DX7GSR2 0x00000EE8 +#define DDRSS_DDRPHY_DX7GSR3 0x00000EEC +#define DDRSS_DDRPHY_DX7GSR4 0x00000EF0 +#define DDRSS_DDRPHY_DX7GSR5 0x00000EF4 +#define DDRSS_DDRPHY_DX7GSR6 0x00000EF8 +#define DDRSS_DDRPHY_DX8GCR0 0x00000F00 +#define DDRSS_DDRPHY_DX8GCR1 0x00000F04 +#define DDRSS_DDRPHY_DX8GCR2 0x00000F08 +#define DDRSS_DDRPHY_DX8GCR3 0x00000F0C +#define DDRSS_DDRPHY_DX8GCR4 0x00000F10 +#define DDRSS_DDRPHY_DX8GCR5 0x00000F14 +#define DDRSS_DDRPHY_DX8GCR6 0x00000F18 +#define DDRSS_DDRPHY_DX8GCR7 0x00000F1C +#define DDRSS_DDRPHY_DX8GCR8 0x00000F20 +#define DDRSS_DDRPHY_DX8GCR9 0x00000F24 +#define DDRSS_DDRPHY_DX8DQMAP0 0x00000F28 +#define DDRSS_DDRPHY_DX8DQMAP1 0x00000F2C +#define DDRSS_DDRPHY_DX8BDLR0 0x00000F40 +#define DDRSS_DDRPHY_DX8BDLR1 0x00000F44 +#define DDRSS_DDRPHY_DX8BDLR2 0x00000F48 +#define DDRSS_DDRPHY_DX8BDLR3 0x00000F50 +#define DDRSS_DDRPHY_DX8BDLR4 0x00000F54 +#define DDRSS_DDRPHY_DX8BDLR5 0x00000F58 +#define DDRSS_DDRPHY_DX8BDLR6 0x00000F60 +#define DDRSS_DDRPHY_DX8BDLR7 0x00000F64 +#define DDRSS_DDRPHY_DX8BDLR8 0x00000F68 +#define DDRSS_DDRPHY_DX8BDLR9 0x00000F6C +#define DDRSS_DDRPHY_DX8LCDLR0 0x00000F80 +#define DDRSS_DDRPHY_DX8LCDLR1 0x00000F84 +#define DDRSS_DDRPHY_DX8LCDLR2 0x00000F88 +#define DDRSS_DDRPHY_DX8LCDLR3 0x00000F8C +#define DDRSS_DDRPHY_DX8LCDLR4 0x00000F90 +#define DDRSS_DDRPHY_DX8LCDLR5 0x00000F94 +#define DDRSS_DDRPHY_DX8MDLR0 0x00000FA0 +#define DDRSS_DDRPHY_DX8MDLR1 0x00000FA4 +#define DDRSS_DDRPHY_DX8GTR0 0x00000FC0 +#define DDRSS_DDRPHY_DX8RSR0 0x00000FD0 +#define DDRSS_DDRPHY_DX8RSR1 0x00000FD4 +#define DDRSS_DDRPHY_DX8RSR2 0x00000FD8 +#define DDRSS_DDRPHY_DX8RSR3 0x00000FDC +#define DDRSS_DDRPHY_DX8GSR0 0x00000FE0 +#define DDRSS_DDRPHY_DX8GSR1 0x00000FE4 +#define DDRSS_DDRPHY_DX8GSR2 0x00000FE8 +#define DDRSS_DDRPHY_DX8GSR3 0x00000FEC +#define DDRSS_DDRPHY_DX8GSR4 0x00000FF0 +#define DDRSS_DDRPHY_DX8GSR5 0x00000FF4 +#define DDRSS_DDRPHY_DX8GSR6 0x00000FF8 +#define DDRSS_DDRPHY_DX8SL0OSC 0x00001400 +#define DDRSS_DDRPHY_DX8SL0PLLCR0 0x00001404 +#define DDRSS_DDRPHY_DX8SL0PLLCR1 0x00001408 +#define DDRSS_DDRPHY_DX8SL0PLLCR2 0x0000140C +#define DDRSS_DDRPHY_DX8SL0PLLCR3 0x00001410 +#define DDRSS_DDRPHY_DX8SL0PLLCR4 0x00001414 +#define DDRSS_DDRPHY_DX8SL0PLLCR5 0x00001418 +#define DDRSS_DDRPHY_DX8SL0DQSCTL 0x0000141C +#define DDRSS_DDRPHY_DX8SL0TRNCTL 0x00001420 +#define DDRSS_DDRPHY_DX8SL0DDLCTL 0x00001424 +#define DDRSS_DDRPHY_DX8SL0DXCTL1 0x00001428 +#define DDRSS_DDRPHY_DX8SL0DXCTL2 0x0000142C +#define DDRSS_DDRPHY_DX8SL0IOCR 0x00001430 +#define DDRSS_DDRPHY_DX4SL0IOCR 0x00001434 +#define DDRSS_DDRPHY_DX8SL1OSC 0x00001440 +#define DDRSS_DDRPHY_DX8SL1PLLCR0 0x00001444 +#define DDRSS_DDRPHY_DX8SL1PLLCR1 0x00001448 +#define DDRSS_DDRPHY_DX8SL1PLLCR2 0x0000144C +#define DDRSS_DDRPHY_DX8SL1PLLCR3 0x00001450 +#define DDRSS_DDRPHY_DX8SL1PLLCR4 0x00001454 +#define DDRSS_DDRPHY_DX8SL1PLLCR5 0x00001458 +#define DDRSS_DDRPHY_DX8SL1DQSCTL 0x0000145C +#define DDRSS_DDRPHY_DX8SL1TRNCTL 0x00001460 +#define DDRSS_DDRPHY_DX8SL1DDLCTL 0x00001464 +#define DDRSS_DDRPHY_DX8SL1DXCTL1 0x00001468 +#define DDRSS_DDRPHY_DX8SL1DXCTL2 0x0000146C +#define DDRSS_DDRPHY_DX8SL1IOCR 0x00001470 +#define DDRSS_DDRPHY_DX4SL1IOCR 0x00001474 +#define DDRSS_DDRPHY_DX8SL2OSC 0x00001480 +#define DDRSS_DDRPHY_DX8SL2PLLCR0 0x00001484 +#define DDRSS_DDRPHY_DX8SL2PLLCR1 0x00001488 +#define DDRSS_DDRPHY_DX8SL2PLLCR2 0x0000148C +#define DDRSS_DDRPHY_DX8SL2PLLCR3 0x00001490 +#define DDRSS_DDRPHY_DX8SL2PLLCR4 0x00001494 +#define DDRSS_DDRPHY_DX8SL2PLLCR5 0x00001498 +#define DDRSS_DDRPHY_DX8SL2DQSCTL 0x0000149C +#define DDRSS_DDRPHY_DX8SL2TRNCTL 0x000014A0 +#define DDRSS_DDRPHY_DX8SL2DDLCTL 0x000014A4 +#define DDRSS_DDRPHY_DX8SL2DXCTL1 0x000014A8 +#define DDRSS_DDRPHY_DX8SL2DXCTL2 0x000014AC +#define DDRSS_DDRPHY_DX8SL2IOCR 0x000014B0 +#define DDRSS_DDRPHY_DX4SL2IOCR 0x000014B4 +#define DDRSS_DDRPHY_DX8SL3OSC 0x000014C0 +#define DDRSS_DDRPHY_DX8SL3PLLCR0 0x000014C4 +#define DDRSS_DDRPHY_DX8SL3PLLCR1 0x000014C8 +#define DDRSS_DDRPHY_DX8SL3PLLCR2 0x000014CC +#define DDRSS_DDRPHY_DX8SL3PLLCR3 0x000014D0 +#define DDRSS_DDRPHY_DX8SL3PLLCR4 0x000014D4 +#define DDRSS_DDRPHY_DX8SL3PLLCR5 0x000014D8 +#define DDRSS_DDRPHY_DX8SL3DQSCTL 0x000014DC +#define DDRSS_DDRPHY_DX8SL3TRNCTL 0x000014E0 +#define DDRSS_DDRPHY_DX8SL3DDLCTL 0x000014E4 +#define DDRSS_DDRPHY_DX8SL3DXCTL1 0x000014E8 +#define DDRSS_DDRPHY_DX8SL3DXCTL2 0x000014EC +#define DDRSS_DDRPHY_DX8SL3IOCR 0x000014F0 +#define DDRSS_DDRPHY_DX4SL3IOCR 0x000014F4 +#define DDRSS_DDRPHY_DX8SL4OSC 0x00001500 +#define DDRSS_DDRPHY_DX8SL4PLLCR0 0x00001504 +#define DDRSS_DDRPHY_DX8SL4PLLCR1 0x00001508 +#define DDRSS_DDRPHY_DX8SL4PLLCR2 0x0000150C +#define DDRSS_DDRPHY_DX8SL4PLLCR3 0x00001510 +#define DDRSS_DDRPHY_DX8SL4PLLCR4 0x00001514 +#define DDRSS_DDRPHY_DX8SL4PLLCR5 0x00001518 +#define DDRSS_DDRPHY_DX8SL4DQSCTL 0x0000151C +#define DDRSS_DDRPHY_DX8SL4TRNCTL 0x00001520 +#define DDRSS_DDRPHY_DX8SL4DDLCTL 0x00001524 +#define DDRSS_DDRPHY_DX8SL4DXCTL1 0x00001528 +#define DDRSS_DDRPHY_DX8SL4DXCTL2 0x0000152C +#define DDRSS_DDRPHY_DX8SL4IOCR 0x00001530 +#define DDRSS_DDRPHY_DX4SL4IOCR 0x00001534 +#define DDRSS_DDRPHY_DX8SL5OSC 0x00001540 +#define DDRSS_DDRPHY_DX8SL5PLLCR0 0x00001544 +#define DDRSS_DDRPHY_DX8SL5PLLCR1 0x00001548 +#define DDRSS_DDRPHY_DX8SL5PLLCR2 0x0000154C +#define DDRSS_DDRPHY_DX8SL5PLLCR3 0x00001550 +#define DDRSS_DDRPHY_DX8SL5PLLCR4 0x00001554 +#define DDRSS_DDRPHY_DX8SL5PLLCR5 0x00001558 +#define DDRSS_DDRPHY_DX8SL5DQSCTL 0x0000155C +#define DDRSS_DDRPHY_DX8SL5TRNCTL 0x00001560 +#define DDRSS_DDRPHY_DX8SL5DDLCTL 0x00001564 +#define DDRSS_DDRPHY_DX8SL5DXCTL1 0x00001568 +#define DDRSS_DDRPHY_DX8SL5DXCTL2 0x0000156C +#define DDRSS_DDRPHY_DX8SL5IOCR 0x00001570 +#define DDRSS_DDRPHY_DX4SL5IOCR 0x00001574 +#define DDRSS_DDRPHY_DX8SL6OSC 0x00001580 +#define DDRSS_DDRPHY_DX8SL6PLLCR0 0x00001584 +#define DDRSS_DDRPHY_DX8SL6PLLCR1 0x00001588 +#define DDRSS_DDRPHY_DX8SL6PLLCR2 0x0000158C +#define DDRSS_DDRPHY_DX8SL6PLLCR3 0x00001590 +#define DDRSS_DDRPHY_DX8SL6PLLCR4 0x00001594 +#define DDRSS_DDRPHY_DX8SL6PLLCR5 0x00001598 +#define DDRSS_DDRPHY_DX8SL6DQSCTL 0x0000159C +#define DDRSS_DDRPHY_DX8SL6TRNCTL 0x000015A0 +#define DDRSS_DDRPHY_DX8SL6DDLCTL 0x000015A4 +#define DDRSS_DDRPHY_DX8SL6DXCTL1 0x000015A8 +#define DDRSS_DDRPHY_DX8SL6DXCTL2 0x000015AC +#define DDRSS_DDRPHY_DX8SL6IOCR 0x000015B0 +#define DDRSS_DDRPHY_DX4SL6IOCR 0x000015B4 +#define DDRSS_DDRPHY_DX8SL7OSC 0x000015C0 +#define DDRSS_DDRPHY_DX8SL7PLLCR0 0x000015C4 +#define DDRSS_DDRPHY_DX8SL7PLLCR1 0x000015C8 +#define DDRSS_DDRPHY_DX8SL7PLLCR2 0x000015CC +#define DDRSS_DDRPHY_DX8SL7PLLCR3 0x000015D0 +#define DDRSS_DDRPHY_DX8SL7PLLCR4 0x000015D4 +#define DDRSS_DDRPHY_DX8SL7PLLCR5 0x000015D8 +#define DDRSS_DDRPHY_DX8SL7DQSCTL 0x000015DC +#define DDRSS_DDRPHY_DX8SL7TRNCTL 0x000015E0 +#define DDRSS_DDRPHY_DX8SL7DDLCTL 0x000015E4 +#define DDRSS_DDRPHY_DX8SL7DXCTL1 0x000015E8 +#define DDRSS_DDRPHY_DX8SL7DXCTL2 0x000015EC +#define DDRSS_DDRPHY_DX8SL7IOCR 0x000015F0 +#define DDRSS_DDRPHY_DX4SL7IOCR 0x000015F4 +#define DDRSS_DDRPHY_DX8SL8OSC 0x00001600 +#define DDRSS_DDRPHY_DX8SL8PLLCR0 0x00001604 +#define DDRSS_DDRPHY_DX8SL8PLLCR1 0x00001608 +#define DDRSS_DDRPHY_DX8SL8PLLCR2 0x0000160C +#define DDRSS_DDRPHY_DX8SL8PLLCR3 0x00001610 +#define DDRSS_DDRPHY_DX8SL8PLLCR4 0x00001614 +#define DDRSS_DDRPHY_DX8SL8PLLCR5 0x00001618 +#define DDRSS_DDRPHY_DX8SL8DQSCTL 0x0000161C +#define DDRSS_DDRPHY_DX8SL8TRNCTL 0x00001620 +#define DDRSS_DDRPHY_DX8SL8DDLCTL 0x00001624 +#define DDRSS_DDRPHY_DX8SL8DXCTL1 0x00001628 +#define DDRSS_DDRPHY_DX8SL8DXCTL2 0x0000162C +#define DDRSS_DDRPHY_DX8SL8IOCR 0x00001630 +#define DDRSS_DDRPHY_DX4SL8IOCR 0x00001634 +#define DDRSS_DDRPHY_DX8SLBOSC 0x000017C0 +#define DDRSS_DDRPHY_DX8SLBPLLCR0 0x000017C4 +#define DDRSS_DDRPHY_DX8SLBPLLCR1 0x000017C8 +#define DDRSS_DDRPHY_DX8SLBPLLCR2 0x000017CC +#define DDRSS_DDRPHY_DX8SLBPLLCR3 0x000017D0 +#define DDRSS_DDRPHY_DX8SLBPLLCR4 0x000017D4 +#define DDRSS_DDRPHY_DX8SLBPLLCR5 0x000017D8 +#define DDRSS_DDRPHY_DX8SLBDQSCTL 0x000017DC +#define DDRSS_DDRPHY_DX8SLBTRNCTL 0x000017E0 +#define DDRSS_DDRPHY_DX8SLBDDLCTL 0x000017E4 +#define DDRSS_DDRPHY_DX8SLBDXCTL1 0x000017E8 +#define DDRSS_DDRPHY_DX8SLBDXCTL2 0x000017EC +#define DDRSS_DDRPHY_DX8SLBIOCR 0x000017F0 +#define DDRSS_DDRPHY_DX4SLBIOCR 0x000017F4 + +#define PIR_INIT_SHIFT 0 +#define PIR_INIT_MASK BIT(PIR_INIT_SHIFT) +#define PIR_ZCAL_SHIFT 1 +#define PIR_ZCAL_MASK BIT(PIR_ZCAL_SHIFT) +#define PIR_CA_SHIFT 2 +#define PIR_CA_MASK BIT(PIR_CA_SHIFT) +#define PIR_PLLINIT_SHIFT 4 +#define PIR_PLLINIT_MASK BIT(PIR_PLLINIT_SHIFT) +#define PIR_DCAL_SHIFT 5 +#define PIR_DCAL_MASK BIT(PIR_DCAL_SHIFT) +#define PIR_PHYRST_SHIFT 6 +#define PIR_PHYRST_MASK BIT(PIR_PHYRST_SHIFT) +#define PIR_DRAMRST_SHIFT 7 +#define PIR_DRAMRST_MASK BIT(PIR_DRAMRST_SHIFT) +#define PIR_DRAMINIT_SHIFT 8 +#define PIR_DRAMINIT_MASK BIT(PIR_DRAMINIT_SHIFT) +#define PIR_WL_SHIFT 9 +#define PIR_WL_MASK BIT(PIR_WL_SHIFT) +#define PIR_QSGATE_SHIFT 10 +#define PIR_QSGATE_MASK BIT(PIR_QSGATE_SHIFT) +#define PIR_WLADJ_SHIFT 11 +#define PIR_WLADJ_MASK BIT(PIR_WLADJ_SHIFT) +#define PIR_RDDSKW_SHIFT 12 +#define PIR_RDDSKW_MASK BIT(PIR_RDDSKW_SHIFT) +#define PIR_WRDSKW_SHIFT 13 +#define PIR_WRDSKW_MASK BIT(PIR_WRDSKW_SHIFT) +#define PIR_RDEYE_SHIFT 14 +#define PIR_RDEYE_MASK BIT(PIR_RDEYE_SHIFT) +#define PIR_WREYE_SHIFT 15 +#define PIR_WREYE_MASK BIT(PIR_WREYE_SHIFT) +#define PIR_SRD_SHIFT 16 +#define PIR_SRD_MASK BIT(PIR_SRD_SHIFT) +#define PIR_VREF_SHIFT 17 +#define PIR_VREF_MASK BIT(PIR_VREF_SHIFT) +#define PIR_CTLDINIT_SHIFT 18 +#define PIR_CTLDINIT_MASK BIT(PIR_CTLDINIT_SHIFT) +#define PIR_RDIMMINIT_SHIFT 19 +#define PIR_RDIMMINIT_MASK BIT(PIR_RDIMMINIT_SHIFT) +#define PIR_DQS2DQ_SHIFT 20 +#define PIR_DQS2DQ_MASK BIT(PIR_DQS2DQ_SHIFT) +#define PIR_DCALPSE_SHIFT 29 +#define PIR_DCALPSE_MASK BIT(PIR_DCALPSE_SHIFT) +#define PIR_ZCALBYP_SHIFT 30 +#define PIR_ZCALBYP_MASK BIT(PIR_ZCALBYP_SHIFT) + +#define PIR_PHY_INIT (PIR_ZCAL_MASK | PIR_PLLINIT_MASK | \ + PIR_DCAL_MASK | PIR_PHYRST_MASK) +#define PIR_DRAM_INIT (PIR_DRAMRST_MASK | PIR_DRAMINIT_MASK) +#define PIR_DATA_TR_INIT (PIR_WL_MASK | PIR_QSGATE_MASK | \ + PIR_WLADJ_MASK | PIR_RDDSKW_MASK | \ + PIR_WRDSKW_MASK | PIR_RDEYE_MASK \ + PIR_WREYE_MASK) + +#define PGSR0_IDONE_SHIFT 0 +#define PGSR0_IDONE_MASK BIT(PGSR0_IDONE_SHIFT) +#define PGSR0_PLDONE_SHIFT 1 +#define PGSR0_PLDONE_MASK BIT(PGSR0_PLDONE_SHIFT) +#define PGSR0_DCDONE_SHIFT 2 +#define PGSR0_DCDONE_MASK BIT(PGSR0_DCDONE_SHIFT) +#define PGSR0_ZCDONE_SHIFT 3 +#define PGSR0_ZCDONE_MASK BIT(PGSR0_ZCDONE_SHIFT) +#define PGSR0_DIDONE_SHIFT 4 +#define PGSR0_DIDONE_MASK BIT(PGSR0_DIDONE_SHIFT) +#define PGSR0_WLDONE_SHIFT 5 +#define PGSR0_WLDONE_MASK BIT(PGSR0_WLDONE_SHIFT) +#define PGSR0_QSGDONE_SHIFT 6 +#define PGSR0_QSGDONE_MASK BIT(PGSR0_QSGDONE_SHIFT) +#define PGSR0_WLADONE_SHIFT 7 +#define PGSR0_WLADONE_MASK BIT(PGSR0_WLADONE_SHIFT) +#define PGSR0_RDDONE_SHIFT 8 +#define PGSR0_RDDONE_MASK BIT(PGSR0_RDDONE_SHIFT) +#define PGSR0_WDDONE_SHIFT 9 +#define PGSR0_WDDONE_MASK BIT(PGSR0_WDDONE_SHIFT) +#define PGSR0_REDONE_SHIFT 10 +#define PGSR0_REDONE_MASK BIT(PGSR0_REDONE_SHIFT) +#define PGSR0_WEDONE_SHIFT 11 +#define PGSR0_WEDONE_MASK BIT(PGSR0_WEDONE_SHIFT) +#define PGSR0_CADONE_SHIFT 12 +#define PGSR0_CADONE_MASK BIT(PGSR0_CADONE_SHIFT) +#define PGSR0_SRDDONE_SHIFT 13 +#define PGSR0_SRDDONE_MASK BIT(PGSR0_SRDDONE_SHIFT) +#define PGSR0_VDONE_SHIFT 14 +#define PGSR0_VDONE_MASK BIT(PGSR0_VDONE_SHIFT) +#define PGSR0_DQS2DQDONE_SHIFT 15 +#define PGSR0_DQS2DQDONE_MASK BIT(PGSR0_DQS2DQDONE_SHIFT) +#define PGSR0_DQS2DQERR_SHIFT 18 +#define PGSR0_DQS2DQERR_MASK BIT(PGSR0_DQS2DQERR_SHIFT) +#define PGSR0_VERR_SHIFT 19 +#define PGSR0_VERR_MASK BIT(PGSR0_VERR_SHIFT) +#define PGSR0_ZCERR_SHIFT 20 +#define PGSR0_ZCERR_MASK BIT(PGSR0_ZCERR_SHIFT) +#define PGSR0_WLERR_SHIFT 21 +#define PGSR0_WLERR_MASK BIT(PGSR0_WLERR_SHIFT) +#define PGSR0_QSGERR_SHIFT 22 +#define PGSR0_QSGERR_MASK BIT(PGSR0_QSGERR_SHIFT) +#define PGSR0_WLAERR_SHIFT 23 +#define PGSR0_WLAERR_MASK BIT(PGSR0_WLAERR_SHIFT) +#define PGSR0_RDERR_SHIFT 24 +#define PGSR0_RDERR_MASK BIT(PGSR0_RDERR_SHIFT) +#define PGSR0_WDERR_SHIFT 25 +#define PGSR0_WDERR_MASK BIT(PGSR0_WDERR_SHIFT) +#define PGSR0_REERR_SHIFT 26 +#define PGSR0_REERR_MASK BIT(PGSR0_REERR_SHIFT) +#define PGSR0_WEERR_SHIFT 27 +#define PGSR0_WEERR_MASK BIT(PGSR0_WEERR_SHIFT) +#define PGSR0_CAERR_SHIFT 28 +#define PGSR0_CAERR_MASK BIT(PGSR0_CAERR_SHIFT) +#define PGSR0_CAWRN_SHIFT 29 +#define PGSR0_CAWRN_MASK BIT(PGSR0_CAWRN_SHIFT) +#define PGSR0_SRDERR_SHIFT 30 +#define PGSR0_SRDERR_MASK BIT(PGSR0_SRDERR_SHIFT) +#define PGSR0_APLOCK_SHIFT 31 +#define PGSR0_APLOCK_MASK BIT(PGSR0_APLOCK_SHIFT) + +#define PGSR0_PHY_INIT_MASK (PGSR0_IDONE_MASK | PGSR0_PLDONE_MASK |\ + PGSR0_DCDONE_MASK | PGSR0_ZCDONE_MASK |\ + PGSR0_APLOCK_MASK) +#define PGSR0_DRAM_INIT_MASK (PGSR0_PHY_INIT_MASK | \ + PGSR0_DIDONE_MASK) +#define PGSR0_DATA_TR_INIT_MASK (PGSR0_DRAM_INIT_MASK) + +struct ddrss_ddrctl_reg_params { + u32 ddrctl_dfimisc; + u32 ddrctl_dfitmg0; + u32 ddrctl_dfitmg1; + u32 ddrctl_dfitmg2; + u32 ddrctl_init0; + u32 ddrctl_init1; + u32 ddrctl_init3; + u32 ddrctl_init4; + u32 ddrctl_init5; + u32 ddrctl_init6; + u32 ddrctl_init7; + u32 ddrctl_mstr; + u32 ddrctl_odtcfg; + u32 ddrctl_odtmap; + u32 ddrctl_rankctl; + u32 ddrctl_rfshctl0; + u32 ddrctl_rfshtmg; + u32 ddrctl_zqctl0; + u32 ddrctl_zqctl1; +}; + +struct ddrss_ddrctl_crc_params { + u32 ddrctl_crcparctl0; + u32 ddrctl_crcparctl1; + u32 ddrctl_crcparctl2; +}; + +struct ddrss_ddrctl_ecc_params { + u32 ddrctl_ecccfg0; +}; + +struct ddrss_ddrctl_map_params { + u32 ddrctl_addrmap0; + u32 ddrctl_addrmap1; + u32 ddrctl_addrmap2; + u32 ddrctl_addrmap3; + u32 ddrctl_addrmap4; + u32 ddrctl_addrmap5; + u32 ddrctl_addrmap6; + u32 ddrctl_addrmap7; + u32 ddrctl_addrmap8; + u32 ddrctl_addrmap9; + u32 ddrctl_addrmap10; + u32 ddrctl_addrmap11; + u32 ddrctl_dqmap0; + u32 ddrctl_dqmap1; + u32 ddrctl_dqmap4; + u32 ddrctl_dqmap5; +}; + +struct ddrss_ddrctl_pwr_params { + u32 ddrctl_pwrctl; +}; + +struct ddrss_ddrctl_timing_params { + u32 ddrctl_dramtmg0; + u32 ddrctl_dramtmg1; + u32 ddrctl_dramtmg2; + u32 ddrctl_dramtmg3; + u32 ddrctl_dramtmg4; + u32 ddrctl_dramtmg5; + u32 ddrctl_dramtmg6; + u32 ddrctl_dramtmg7; + u32 ddrctl_dramtmg8; + u32 ddrctl_dramtmg9; + u32 ddrctl_dramtmg11; + u32 ddrctl_dramtmg12; + u32 ddrctl_dramtmg13; + u32 ddrctl_dramtmg14; + u32 ddrctl_dramtmg15; + u32 ddrctl_dramtmg17; +}; + +struct ddrss_ddrphy_cfg_params { + u32 ddrphy_dcr; + u32 ddrphy_dsgcr; + u32 ddrphy_dx0gcr0; + u32 ddrphy_dx0gcr1; + u32 ddrphy_dx0gcr2; + u32 ddrphy_dx0gcr3; + u32 ddrphy_dx0gcr4; + u32 ddrphy_dx0gcr5; + u32 ddrphy_dx0gtr0; + u32 ddrphy_dx1gcr0; + u32 ddrphy_dx1gcr1; + u32 ddrphy_dx1gcr2; + u32 ddrphy_dx1gcr3; + u32 ddrphy_dx1gcr4; + u32 ddrphy_dx1gcr5; + u32 ddrphy_dx1gtr0; + u32 ddrphy_dx2gcr0; + u32 ddrphy_dx2gcr1; + u32 ddrphy_dx2gcr2; + u32 ddrphy_dx2gcr3; + u32 ddrphy_dx2gcr4; + u32 ddrphy_dx2gcr5; + u32 ddrphy_dx2gtr0; + u32 ddrphy_dx3gcr0; + u32 ddrphy_dx3gcr1; + u32 ddrphy_dx3gcr2; + u32 ddrphy_dx3gcr3; + u32 ddrphy_dx3gcr4; + u32 ddrphy_dx3gcr5; + u32 ddrphy_dx3gtr0; + u32 ddrphy_dx4gcr0; + u32 ddrphy_dx4gcr1; + u32 ddrphy_dx4gcr2; + u32 ddrphy_dx4gcr3; + u32 ddrphy_dx4gcr4; + u32 ddrphy_dx4gcr5; + u32 ddrphy_dx4gtr0; + u32 ddrphy_dx8sl0dxctl2; + u32 ddrphy_dx8sl0iocr; + u32 ddrphy_dx8sl0pllcr0; + u32 ddrphy_dx8sl1dxctl2; + u32 ddrphy_dx8sl1iocr; + u32 ddrphy_dx8sl1pllcr0; + u32 ddrphy_dx8sl2dxctl2; + u32 ddrphy_dx8sl2iocr; + u32 ddrphy_dx8sl2pllcr0; + u32 ddrphy_dxccr; + u32 ddrphy_odtcr; + u32 ddrphy_pgcr0; + u32 ddrphy_pgcr1; + u32 ddrphy_pgcr2; + u32 ddrphy_pgcr3; + u32 ddrphy_pgcr5; + u32 ddrphy_pgcr6; +}; + +struct ddrss_ddrphy_ctrl_params { + u32 ddrphy_dtcr0; + u32 ddrphy_dtcr1; + u32 ddrphy_mr0; + u32 ddrphy_mr1; + u32 ddrphy_mr2; + u32 ddrphy_mr3; + u32 ddrphy_mr4; + u32 ddrphy_mr5; + u32 ddrphy_mr6; + u32 ddrphy_mr11; + u32 ddrphy_mr12; + u32 ddrphy_mr13; + u32 ddrphy_mr14; + u32 ddrphy_mr22; + u32 ddrphy_pllcr0; + u32 ddrphy_vtcr0; +}; + +struct ddrss_ddrphy_ioctl_params { + u32 ddrphy_aciocr5; + u32 ddrphy_iovcr0; +}; + +struct ddrss_ddrphy_timing_params { + u32 ddrphy_dtpr0; + u32 ddrphy_dtpr1; + u32 ddrphy_dtpr2; + u32 ddrphy_dtpr3; + u32 ddrphy_dtpr4; + u32 ddrphy_dtpr5; + u32 ddrphy_dtpr6; + u32 ddrphy_ptr2; + u32 ddrphy_ptr3; + u32 ddrphy_ptr4; + u32 ddrphy_ptr5; + u32 ddrphy_ptr6; +}; + +struct ddrss_ddrphy_zq_params { + u32 ddrphy_zq0pr0; + u32 ddrphy_zq1pr0; + u32 ddrphy_zqcr; +}; + +struct ddrss_params { + struct ddrss_ddrctl_reg_params ctl_reg; + struct ddrss_ddrctl_crc_params ctl_crc; + struct ddrss_ddrctl_ecc_params ctl_ecc; + struct ddrss_ddrctl_map_params ctl_map; + struct ddrss_ddrctl_pwr_params ctl_pwr; + struct ddrss_ddrctl_timing_params ctl_timing; + struct ddrss_ddrphy_cfg_params phy_cfg; + struct ddrss_ddrphy_ctrl_params phy_ctrl; + struct ddrss_ddrphy_ioctl_params phy_ioctl; + struct ddrss_ddrphy_timing_params phy_timing; + struct ddrss_ddrphy_zq_params phy_zq; +}; + +#endif /* __K3_AM654_DDRSS_H */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 597db4b9cb..6625a65b58 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -500,6 +500,12 @@ config BCM6345_SERIAL help Select this to enable UART on BCM6345 SoCs. +config BCM6858_SERIAL + bool "Support for BCM6858 UART" + depends on DM_SERIAL && ARCH_BCM6858 + help + Select this to enable UART on BCM6358 SoCs. + config FSL_LINFLEXUART bool "Freescale Linflex UART support" depends on DM_SERIAL diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 03dc29ee2e..a48458f955 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_AR933X_UART) += serial_ar933x.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o obj-$(CONFIG_BCM6345_SERIAL) += serial_bcm6345.o +obj-$(CONFIG_BCM6858_SERIAL) += serial_bcm6858.o obj-$(CONFIG_EFI_APP) += serial_efi.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 1e6fc6c668..f21c240e64 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -148,10 +148,13 @@ int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) { - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); + /* to keep serial format, read lcr before writing BKSE */ + int lcr_val = serial_in(&com_port->lcr) & ~UART_LCR_BKSE; + + serial_out(UART_LCR_BKSE | lcr_val, &com_port->lcr); serial_out(baud_divisor & 0xff, &com_port->dll); serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + serial_out(lcr_val, &com_port->lcr); } void NS16550_init(NS16550_t com_port, int baud_divisor) @@ -181,6 +184,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(UART_MCRVAL, &com_port->mcr); serial_out(ns16550_getfcr(com_port), &com_port->fcr); + /* initialize serial config to 8N1 before writing baudrate */ + serial_out(UART_LCRVAL, &com_port->lcr); if (baud_divisor != -1) NS16550_setbrg(com_port, baud_divisor); #if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \ @@ -348,6 +353,39 @@ static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) return 0; } +static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + int lcr_val = UART_LCR_WLS_8; + uint parity = SERIAL_GET_PARITY(serial_config); + uint bits = SERIAL_GET_BITS(serial_config); + uint stop = SERIAL_GET_STOP(serial_config); + + /* + * only parity config is implemented, check if other serial settings + * are the default one. + */ + if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP) + return -ENOTSUPP; /* not supported in driver*/ + + switch (parity) { + case SERIAL_PAR_NONE: + /* no bits to add */ + break; + case SERIAL_PAR_ODD: + lcr_val |= UART_LCR_PEN; + break; + case SERIAL_PAR_EVEN: + lcr_val |= UART_LCR_PEN | UART_LCR_EPS; + break; + default: + return -ENOTSUPP; /* not supported in driver*/ + } + + serial_out(lcr_val, &com_port->lcr); + return 0; +} + int ns16550_serial_probe(struct udevice *dev) { struct NS16550 *const com_port = dev_get_priv(dev); @@ -454,6 +492,7 @@ const struct dm_serial_ops ns16550_serial_ops = { .pending = ns16550_serial_pending, .getc = ns16550_serial_getc, .setbrg = ns16550_serial_setbrg, + .setconfig = ns16550_serial_setconfig }; #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) diff --git a/drivers/serial/serial_bcm6858.c b/drivers/serial/serial_bcm6858.c new file mode 100644 index 0000000000..8aa37055f0 --- /dev/null +++ b/drivers/serial/serial_bcm6858.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> + * + * Derived from linux/drivers/tty/serial/bcm63xx_uart.c: + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Derived from linux/drivers/tty/serial/serial_bcm6345.c + * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> + */ + +#include <clk.h> +#include <dm.h> +#include <debug_uart.h> +#include <errno.h> +#include <serial.h> +#include <asm/io.h> +#include <asm/types.h> + +/* UART Control register */ +#define UART_CTL_REG 0x0 +#define UART_CTL_RXTIMEOUT_MASK 0x1f +#define UART_CTL_RXTIMEOUT_5 0x5 +#define UART_CTL_RSTRXFIFO_SHIFT 6 +#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT) +#define UART_CTL_RSTTXFIFO_SHIFT 7 +#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT) +#define UART_CTL_STOPBITS_SHIFT 8 +#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_BITSPERSYM_SHIFT 12 +#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT) +#define UART_CTL_BITSPERSYM_8 (0x3 << UART_CTL_BITSPERSYM_SHIFT) +#define UART_CTL_XMITBRK_SHIFT 14 +#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT) +#define UART_CTL_RSVD_SHIFT 15 +#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT) +#define UART_CTL_RXPAREVEN_SHIFT 16 +#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT) +#define UART_CTL_RXPAREN_SHIFT 17 +#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT) +#define UART_CTL_TXPAREVEN_SHIFT 18 +#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT) +#define UART_CTL_TXPAREN_SHIFT 19 +#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT) +#define UART_CTL_LOOPBACK_SHIFT 20 +#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT) +#define UART_CTL_RXEN_SHIFT 21 +#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT) +#define UART_CTL_TXEN_SHIFT 22 +#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT) +#define UART_CTL_BRGEN_SHIFT 23 +#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT) + +/* UART Baudword register */ +#define UART_BAUD_REG 0x4 + +/* UART FIFO Config register */ +#define UART_FIFO_CFG_REG 0x8 +#define UART_FIFO_CFG_RX_SHIFT 8 +#define UART_FIFO_CFG_RX_MASK (0xf << UART_FIFO_CFG_RX_SHIFT) +#define UART_FIFO_CFG_RX_4 (0x4 << UART_FIFO_CFG_RX_SHIFT) +#define UART_FIFO_CFG_TX_SHIFT 12 +#define UART_FIFO_CFG_TX_MASK (0xf << UART_FIFO_CFG_TX_SHIFT) +#define UART_FIFO_CFG_TX_4 (0x4 << UART_FIFO_CFG_TX_SHIFT) + +/* UART Interrupt register */ +#define UART_IR_REG 0x10 +#define UART_IR_STAT(x) (1 << (x)) +#define UART_IR_TXEMPTY 5 +#define UART_IR_RXOVER 7 +#define UART_IR_RXNOTEMPTY 11 + +/* UART FIFO register */ +#define UART_FIFO_REG 0x14 +#define UART_FIFO_VALID_MASK 0xff +#define UART_FIFO_FRAMEERR_SHIFT 8 +#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT) +#define UART_FIFO_PARERR_SHIFT 9 +#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT) +#define UART_FIFO_BRKDET_SHIFT 10 +#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT) +#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \ + UART_FIFO_PARERR_MASK | \ + UART_FIFO_BRKDET_MASK) + +struct bcm6858_serial_priv { + void __iomem *base; + ulong uartclk; +}; + +/* enable rx & tx operation on uart */ +static void bcm6858_serial_enable(void __iomem *base) +{ + setbits_le32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | + UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); +} + +/* disable rx & tx operation on uart */ +static void bcm6858_serial_disable(void __iomem *base) +{ + clrbits_le32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | + UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); +} + +/* clear all unread data in rx fifo and unsent data in tx fifo */ +static void bcm6858_serial_flush(void __iomem *base) +{ + /* empty rx and tx fifo */ + setbits_le32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK | + UART_CTL_RSTTXFIFO_MASK); + + /* read any pending char to make sure all irq status are cleared */ + readl(base + UART_FIFO_REG); +} + +static int bcm6858_serial_init(void __iomem *base, ulong clk, u32 baudrate) +{ + u32 val; + + /* mask all irq and flush port */ + bcm6858_serial_disable(base); + bcm6858_serial_flush(base); + + /* set uart control config */ + clrsetbits_le32(base + UART_CTL_REG, + /* clear rx timeout */ + UART_CTL_RXTIMEOUT_MASK | + /* clear stop bits */ + UART_CTL_STOPBITS_MASK | + /* clear bits per symbol */ + UART_CTL_BITSPERSYM_MASK | + /* clear xmit break */ + UART_CTL_XMITBRK_MASK | + /* clear reserved bit */ + UART_CTL_RSVD_MASK | + /* disable parity */ + UART_CTL_RXPAREN_MASK | + UART_CTL_TXPAREN_MASK | + /* disable loopback */ + UART_CTL_LOOPBACK_MASK, + /* set timeout to 5 */ + UART_CTL_RXTIMEOUT_5 | + /* set 8 bits/symbol */ + UART_CTL_BITSPERSYM_8 | + /* set 1 stop bit */ + UART_CTL_STOPBITS_1 | + /* set parity to even */ + UART_CTL_RXPAREVEN_MASK | + UART_CTL_TXPAREVEN_MASK); + + /* set uart fifo config */ + clrsetbits_le32(base + UART_FIFO_CFG_REG, + /* clear fifo config */ + UART_FIFO_CFG_RX_MASK | + UART_FIFO_CFG_TX_MASK, + /* set fifo config to 4 */ + UART_FIFO_CFG_RX_4 | + UART_FIFO_CFG_TX_4); + + /* set baud rate */ + val = ((clk / baudrate) >> 4); + if (val & 0x1) + val = (val >> 1); + else + val = (val >> 1) - 1; + writel(val, base + UART_BAUD_REG); + + /* clear interrupts */ + writel(0, base + UART_IR_REG); + + /* enable uart */ + bcm6858_serial_enable(base); + + return 0; +} + +static int bcm6858_serial_pending(struct udevice *dev, bool input) +{ + struct bcm6858_serial_priv *priv = dev_get_priv(dev); + u32 val = readl(priv->base + UART_IR_REG); + + if (input) + return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)); + else + return !(val & UART_IR_STAT(UART_IR_TXEMPTY)); +} + +static int bcm6858_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct bcm6858_serial_priv *priv = dev_get_priv(dev); + + return bcm6858_serial_init(priv->base, priv->uartclk, baudrate); +} + +static int bcm6858_serial_putc(struct udevice *dev, const char ch) +{ + struct bcm6858_serial_priv *priv = dev_get_priv(dev); + u32 val; + + val = readl(priv->base + UART_IR_REG); + if (!(val & UART_IR_STAT(UART_IR_TXEMPTY))) + return -EAGAIN; + + writel(ch, priv->base + UART_FIFO_REG); + + return 0; +} + +static int bcm6858_serial_getc(struct udevice *dev) +{ + struct bcm6858_serial_priv *priv = dev_get_priv(dev); + u32 val; + + val = readl(priv->base + UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_RXOVER)) + setbits_le32(priv->base + UART_CTL_REG, + UART_CTL_RSTRXFIFO_MASK); + + if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY))) + return -EAGAIN; + + val = readl(priv->base + UART_FIFO_REG); + if (val & UART_FIFO_ANYERR_MASK) + return -EAGAIN; + + return val & UART_FIFO_VALID_MASK; +} + +static int bcm6858_serial_probe(struct udevice *dev) +{ + struct bcm6858_serial_priv *priv = dev_get_priv(dev); + struct clk clk; + int ret; + + /* get address */ + priv->base = dev_remap_addr(dev); + if (!priv->base) + return -EINVAL; + + /* get clock rate */ + ret = clk_get_by_index(dev, 0, &clk); + if (ret < 0) + return ret; + priv->uartclk = clk_get_rate(&clk); + clk_free(&clk); + + /* initialize serial */ + return bcm6858_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE); +} + +static const struct dm_serial_ops bcm6858_serial_ops = { + .putc = bcm6858_serial_putc, + .pending = bcm6858_serial_pending, + .getc = bcm6858_serial_getc, + .setbrg = bcm6858_serial_setbrg, +}; + +static const struct udevice_id bcm6858_serial_ids[] = { + { .compatible = "brcm,bcm6858-uart" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(bcm6858_serial) = { + .name = "bcm6858-uart", + .id = UCLASS_SERIAL, + .of_match = bcm6858_serial_ids, + .probe = bcm6858_serial_probe, + .priv_auto_alloc_size = sizeof(struct bcm6858_serial_priv), + .ops = &bcm6858_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +#ifdef CONFIG_DEBUG_UART_BCM6858 +static inline void _debug_uart_init(void) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + + bcm6858_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); +} + +static inline void wait_xfered(void __iomem *base) +{ + do { + u32 val = readl(base + UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + } while (1); +} + +static inline void _debug_uart_putc(int ch) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + + wait_xfered(base); + writel(ch, base + UART_FIFO_REG); + wait_xfered(base); +} + +DEBUG_UART_FUNCS +#endif diff --git a/drivers/w1-eeprom/Kconfig b/drivers/w1-eeprom/Kconfig index 4b7f3c4e0b..34aca4b900 100644 --- a/drivers/w1-eeprom/Kconfig +++ b/drivers/w1-eeprom/Kconfig @@ -18,6 +18,19 @@ config W1_EEPROM_DS24XXX help Maxim DS24 EEPROMs 1-Wire EEPROM support +config W1_EEPROM_DS2502 + bool "Enable Maxim DS2502 Add-Only Memory support" + depends on W1 + help + Maxim DS2502 1-Wire add-only memory support. + This device has 128 bytes of data memory, organized as 4 pages of + 32 bytes and 8 out of band status bytes that may be used to redirect + pages, allowing data to be modified up to 4 times (by external + programming). + + The device may be seen as a 32 byte memory, using the page redirection + or as a 128 byte memory, ignoring the page redirection. + config W1_EEPROM_SANDBOX bool "Enable sandbox onewire EEPROM driver" depends on W1 diff --git a/drivers/w1-eeprom/Makefile b/drivers/w1-eeprom/Makefile index 03cc4c8ac8..83f4008bb5 100644 --- a/drivers/w1-eeprom/Makefile +++ b/drivers/w1-eeprom/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o obj-$(CONFIG_W1_EEPROM_DS24XXX) += ds24xxx.o +obj-$(CONFIG_W1_EEPROM_DS2502) += ds2502.o obj-$(CONFIG_W1_EEPROM_SANDBOX) += eep_sandbox.o diff --git a/drivers/w1-eeprom/ds2502.c b/drivers/w1-eeprom/ds2502.c new file mode 100644 index 0000000000..76ca460ed7 --- /dev/null +++ b/drivers/w1-eeprom/ds2502.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for DS-2502 One wire "Add only Memory". + * + * The chip has 4 pages of 32 bytes. + * In addition it has 8 out of band status bytes that are used, by software, + * as page redirection bytes by an algorithm described in the data sheet. + * This is useful since data cannot be erased once written but it can be + * "patched" up to four times by switching pages. + * + * So, when a read request is entirely in the first page automatically + * apply the page redirection bytes (which allows the device to be seen as + * a 32 byte PROM, writable 4 times). + * + * If the read request is outside of or larger than the first page then read + * the raw data (which allows the device to be seen as a 128 byte PROM, + * writable once). + * + * Copyright (c) 2018 Flowbird + * Martin Fuzzey <martin.fuzzey@flowbird.group> + */ + +#include <common.h> +#include <dm.h> +#include <linux/err.h> +#include <w1-eeprom.h> +#include <w1.h> + +#define DS2502_PAGE_SIZE 32 +#define DS2502_PAGE_COUNT 4 +#define DS2502_STATUS_SIZE 8 + +#define DS2502_CMD_READ_STATUS 0xAA +#define DS2502_CMD_READ_GEN_CRC 0xC3 + +/* u-boot crc8() is CCITT CRC8, we need x^8 + x^5 + x^4 + 1 LSB first */ +static unsigned int ds2502_crc8(const u8 *buf, int len) +{ + static const u8 poly = 0x8C; /* (1 + x^4 + x^5) + x^8 */ + u8 crc = 0; + int i; + + for (i = 0; i < len; i++) { + u8 data = buf[i]; + int j; + + for (j = 0; j < 8; j++) { + u8 mix = (crc ^ data) & 1; + + crc >>= 1; + if (mix) + crc ^= poly; + data >>= 1; + } + } + return crc; +} + +static int ds2502_read(struct udevice *dev, u8 cmd, + int bytes_in_page, int pos, + u8 *buf, int bytes_for_user) +{ + int retry; + int ret = 0; + + for (retry = 0; retry < 3; retry++) { + u8 pagebuf[DS2502_PAGE_SIZE + 1]; /* 1 byte for CRC8 */ + u8 crc; + int i; + + ret = w1_reset_select(dev); + if (ret) + return ret; + + /* send read to end of page and generate CRC command */ + pagebuf[0] = cmd; + pagebuf[1] = pos & 0xff; + pagebuf[2] = pos >> 8; + crc = ds2502_crc8(pagebuf, 3); + for (i = 0; i < 3; i++) + w1_write_byte(dev, pagebuf[i]); + + /* Check command CRC */ + ret = w1_read_byte(dev); + if (ret < 0) { + dev_dbg(dev, "Error %d reading command CRC\n", ret); + continue; + } + + if (ret != crc) { + dev_dbg(dev, + "bad CRC8 for cmd %02x got=%02X exp=%02X\n", + cmd, ret, crc); + ret = -EIO; + continue; + } + + /* read data and check CRC */ + ret = w1_read_buf(dev, pagebuf, bytes_in_page + 1); + if (ret < 0) { + dev_dbg(dev, "Error %d reading data\n", ret); + continue; + } + + crc = ds2502_crc8(pagebuf, bytes_in_page); + if (crc == pagebuf[bytes_in_page]) { + memcpy(buf, pagebuf, bytes_for_user); + ret = 0; + break; + } + dev_dbg(dev, "Bad CRC8 got=%02X exp=%02X pos=%04X\n", + pagebuf[bytes_in_page], crc, pos); + ret = -EIO; + } + + return ret; +} + +static inline int ds2502_read_status_bytes(struct udevice *dev, u8 *buf) +{ + return ds2502_read(dev, DS2502_CMD_READ_STATUS, + DS2502_STATUS_SIZE, 0, + buf, DS2502_STATUS_SIZE); +} + +/* + * Status bytes (from index 1) contain 1's complement page indirection + * So for N writes: + * N=1: ff ff ff ff ff ff ff 00 + * N=2: ff fe ff ff ff ff ff 00 + * N=3: ff fe fd ff ff ff ff 00 + * N=4: ff fe fd fc ff ff ff 00 + */ +static int ds2502_indirect_page(struct udevice *dev, u8 *status, int page) +{ + int page_seen = 0; + + do { + u8 sb = status[page + 1]; + + if (sb == 0xff) + break; + + page = ~sb & 0xff; + + if (page >= DS2502_PAGE_COUNT) { + dev_err(dev, + "Illegal page redirection status byte %02x\n", + sb); + return -EINVAL; + } + + if (page_seen & (1 << page)) { + dev_err(dev, "Infinite loop in page redirection\n"); + return -EINVAL; + } + + page_seen |= (1 << page); + } while (1); + + return page; +} + +static int ds2502_read_buf(struct udevice *dev, unsigned int offset, + u8 *buf, unsigned int count) +{ + unsigned int min_page = offset / DS2502_PAGE_SIZE; + unsigned int max_page = (offset + count - 1) / DS2502_PAGE_SIZE; + int xfered = 0; + u8 status_bytes[DS2502_STATUS_SIZE]; + int i; + int ret; + + if (min_page >= DS2502_PAGE_COUNT || max_page >= DS2502_PAGE_COUNT) + return -EINVAL; + + if (min_page == 0 && max_page == 0) { + ret = ds2502_read_status_bytes(dev, status_bytes); + if (ret) + return ret; + } else { + /* Dummy one to one page redirection */ + memset(status_bytes, 0xff, sizeof(status_bytes)); + } + + for (i = min_page; i <= max_page; i++) { + int page; + int pos; + int bytes_in_page; + int bytes_for_user; + + page = ds2502_indirect_page(dev, status_bytes, i); + if (page < 0) + return page; + dev_dbg(dev, "page logical %d => physical %d\n", i, page); + + pos = page * DS2502_PAGE_SIZE; + if (i == min_page) + pos += offset % DS2502_PAGE_SIZE; + + bytes_in_page = DS2502_PAGE_SIZE - (pos % DS2502_PAGE_SIZE); + + if (i == max_page) + bytes_for_user = count - xfered; + else + bytes_for_user = bytes_in_page; + + ret = ds2502_read(dev, DS2502_CMD_READ_GEN_CRC, + bytes_in_page, pos, + &buf[xfered], bytes_for_user); + if (ret < 0) + return ret; + + xfered += bytes_for_user; + } + + return 0; +} + +static int ds2502_probe(struct udevice *dev) +{ + struct w1_device *w1; + + w1 = dev_get_parent_platdata(dev); + w1->id = 0; + return 0; +} + +static const struct w1_eeprom_ops ds2502_ops = { + .read_buf = ds2502_read_buf, +}; + +static const struct udevice_id ds2502_id[] = { + { .compatible = "maxim,ds2502", .data = W1_FAMILY_DS2502 }, + { }, +}; + +U_BOOT_DRIVER(ds2502) = { + .name = "ds2502", + .id = UCLASS_W1_EEPROM, + .of_match = ds2502_id, + .ops = &ds2502_ops, + .probe = ds2502_probe, +}; diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 02f4e1e32f..a911dba73a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -118,4 +118,14 @@ config IMX_WATCHDOG Select this to enable the IMX and LSCH2 of Layerscape watchdog driver. +config WDT_AT91 + bool "AT91 watchdog timer support" + depends on WDT + help + Select this to enable Microchip watchdog timer, which can be found on + some AT91 devices. + +config AT91_HW_WDT_TIMEOUT + bool "AT91 watchdog timeout specified" + depends on WDT_AT91 endmenu diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 08406caa0f..a5c27b0f4c 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o +obj-$(CONFIG_WDT_AT91) += at91sam9_wdt.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o ifneq (,$(filter $(SOC), mx25 mx31 mx35 mx5 mx6 mx7 vf610)) obj-y += imx_watchdog.o diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index fca2849918..13f8772e41 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -2,7 +2,7 @@ /* * [origin: Linux kernel drivers/watchdog/at91sam9_wdt.c] * - * Watchdog driver for Atmel AT91SAM9x processors. + * Watchdog driver for AT91SAM9x processors. * * Copyright (C) 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * Copyright (C) 2008 Renaud CERRATO r.cerrato@til-technologies.fr @@ -14,38 +14,47 @@ * write to this register. Inform Linux to it too */ -#include <common.h> -#include <watchdog.h> -#include <asm/arch/hardware.h> #include <asm/io.h> #include <asm/arch/at91_wdt.h> +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <wdt.h> + +DECLARE_GLOBAL_DATA_PTR; /* * AT91SAM9 watchdog runs a 12bit counter @ 256Hz, * use this to convert a watchdog - * value from/to milliseconds. + * value from seconds. */ -#define ms_to_ticks(t) (((t << 8) / 1000) - 1) -#define ticks_to_ms(t) (((t + 1) * 1000) >> 8) +#define WDT_SEC2TICKS(s) (((s) << 8) - 1) /* Hardware timeout in seconds */ -#if !defined(CONFIG_AT91_HW_WDT_TIMEOUT) -#define WDT_HW_TIMEOUT 2 -#else -#define WDT_HW_TIMEOUT CONFIG_AT91_HW_WDT_TIMEOUT -#endif +#define WDT_MAX_TIMEOUT 16 +#define WDT_MIN_TIMEOUT 0 +#define WDT_DEFAULT_TIMEOUT 2 + +struct at91_wdt_priv { + void __iomem *regs; + u32 regval; + u32 timeout; +}; /* * Set the watchdog time interval in 1/256Hz (write-once) * Counter is 12 bit. */ -static int at91_wdt_settimeout(unsigned int timeout) +static int at91_wdt_start(struct udevice *dev, u64 timeout_s, ulong flags) { - unsigned int reg; - at91_wdt_t *wd = (at91_wdt_t *) ATMEL_BASE_WDT; + struct at91_wdt_priv *priv = dev_get_priv(dev); + u32 timeout = WDT_SEC2TICKS(timeout_s); + + if (timeout_s > WDT_MAX_TIMEOUT || timeout_s < WDT_MIN_TIMEOUT) + timeout = priv->timeout; /* Check if disabled */ - if (readl(&wd->mr) & AT91_WDT_MR_WDDIS) { + if (readl(priv->regs + AT91_WDT_MR) & AT91_WDT_MR_WDDIS) { printf("sorry, watchdog is disabled\n"); return -1; } @@ -57,24 +66,71 @@ static int at91_wdt_settimeout(unsigned int timeout) * 4096 / 256 = 16 seconds. */ - reg = AT91_WDT_MR_WDRSTEN /* causes watchdog reset */ + priv->regval = AT91_WDT_MR_WDRSTEN /* causes watchdog reset */ | AT91_WDT_MR_WDDBGHLT /* disabled in debug mode */ | AT91_WDT_MR_WDD(0xfff) /* restart at any time */ | AT91_WDT_MR_WDV(timeout); /* timer value */ - writel(reg, &wd->mr); + writel(priv->regval, priv->regs + AT91_WDT_MR); + + return 0; +} + +static int at91_wdt_stop(struct udevice *dev) +{ + struct at91_wdt_priv *priv = dev_get_priv(dev); + + /* Disable Watchdog Timer */ + priv->regval |= AT91_WDT_MR_WDDIS; + writel(priv->regval, priv->regs + AT91_WDT_MR); return 0; } -void hw_watchdog_reset(void) +static int at91_wdt_reset(struct udevice *dev) { - at91_wdt_t *wd = (at91_wdt_t *) ATMEL_BASE_WDT; - writel(AT91_WDT_CR_WDRSTT | AT91_WDT_CR_KEY, &wd->cr); + struct at91_wdt_priv *priv = dev_get_priv(dev); + + writel(AT91_WDT_CR_WDRSTT | AT91_WDT_CR_KEY, priv->regs + AT91_WDT_CR); + + return 0; } -void hw_watchdog_init(void) +static const struct wdt_ops at91_wdt_ops = { + .start = at91_wdt_start, + .stop = at91_wdt_stop, + .reset = at91_wdt_reset, +}; + +static const struct udevice_id at91_wdt_ids[] = { + { .compatible = "atmel,at91sam9260-wdt" }, + {} +}; + +static int at91_wdt_probe(struct udevice *dev) { - /* 16 seconds timer, resets enabled */ - at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000)); + struct at91_wdt_priv *priv = dev_get_priv(dev); + + priv->regs = dev_remap_addr(dev); + if (!priv->regs) + return -EINVAL; + +#ifdef CONFIG_AT91_HW_WDT_TIMEOUT + priv->timeout = dev_read_u32_default(dev, "timeout-sec", + WDT_DEFAULT_TIMEOUT); + debug("%s: timeout %d", __func__, priv->timeout); +#endif + + debug("%s: Probing wdt%u\n", __func__, dev->seq); + + return 0; } + +U_BOOT_DRIVER(at91_wdt) = { + .name = "at91_wdt", + .id = UCLASS_WDT, + .of_match = at91_wdt_ids, + .priv_auto_alloc_size = sizeof(struct at91_wdt_priv), + .ops = &at91_wdt_ops, + .probe = at91_wdt_probe, +}; diff --git a/fs/Makefile b/fs/Makefile index bad0c2cc33..f21cd23f03 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -5,6 +5,7 @@ # Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_FS_LOADER) += fs.o obj-$(CONFIG_SPL_FAT_SUPPORT) += fat/ obj-$(CONFIG_SPL_EXT_SUPPORT) += ext4/ else diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 373fee78a9..5838eb3477 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -355,15 +355,16 @@ "boot_script_dhcp=boot.scr.uimg\0" \ BOOTENV_BOOT_TARGETS \ \ + "boot_syslinux_conf=extlinux/extlinux.conf\0" \ "boot_extlinux=" \ "sysboot ${devtype} ${devnum}:${distro_bootpart} any " \ - "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \ + "${scriptaddr} ${prefix}${boot_syslinux_conf}\0" \ \ "scan_dev_for_extlinux=" \ "if test -e ${devtype} " \ "${devnum}:${distro_bootpart} " \ - "${prefix}extlinux/extlinux.conf; then " \ - "echo Found ${prefix}extlinux/extlinux.conf; " \ + "${prefix}${boot_syslinux_conf}; then " \ + "echo Found ${prefix}${boot_syslinux_conf}; " \ "run boot_extlinux; " \ "echo SCRIPT FAILED: continuing...; " \ "fi\0" \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 0463e42048..4e7e5209d4 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -12,16 +12,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ - -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - #include <configs/ti_omap3_common.h> #undef CONFIG_DM_I2C_COMPAT @@ -176,8 +166,6 @@ /* Physical Memory Map */ #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 /* FLASH and environment organization */ @@ -203,10 +191,6 @@ #undef CONFIG_SPL_TEXT_BASE #define CONFIG_SPL_TEXT_BASE 0x40200000 -#undef CONFIG_SPL_BSS_START_ADDR -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index 65015df131..484c5ef2fe 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -21,6 +21,12 @@ /* SPL Loader Configuration */ #ifdef CONFIG_TARGET_AM654_A53_EVM #define CONFIG_SPL_TEXT_BASE 0x80080000 +#else +#define CONFIG_SPL_TEXT_BASE 0x41c00000 +#endif + +#ifdef CONFIG_SYS_K3_SPL_ATF +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" #endif #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/broadcom_bcm968580xref.h b/include/configs/broadcom_bcm968580xref.h new file mode 100644 index 0000000000..1c0945e140 --- /dev/null +++ b/include/configs/broadcom_bcm968580xref.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> + */ + +#include <linux/sizes.h> + +/* + * common + */ + +/* UART */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ + 230400, 500000, 1500000 } +/* Memory usage */ +#define CONFIG_SYS_MAXARGS 24 +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +/* + * 6858 + */ + +/* RAM */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +/* U-Boot */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* + * 968580xref + */ + +#define CONFIG_ENV_SIZE (8 * 1024) diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 0b240e7ebc..c2882e6daf 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -57,10 +57,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* Enable the watchdog */ -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_HW_WATCHDOG - /* * Command line configuration. */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 114b87e1b3..28af575bf2 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -112,13 +112,6 @@ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \ "dhcp" -/* Enable the watchdog */ -#define CONFIG_AT91SAM9_WATCHDOG -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_HW_WATCHDOG -#endif -#define CONFIG_AT91_HW_WDT_TIMEOUT 15 - #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ #define CONFIG_USB_ATMEL diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 4fdb0dd962..f283ab7fca 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -85,13 +85,6 @@ #define CONFIG_RMII #define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_AT91_HW_WDT_TIMEOUT 15 -#if !defined(CONFIG_SPL_BUILD) -/* Enable the watchdog */ -#define CONFIG_HW_WATCHDOG -#endif - /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 55b9b45eec..0f892e51d1 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -165,7 +165,9 @@ /* FAT sd card locations. */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#ifndef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#endif #ifdef CONFIG_SPL_OS_BOOT /* FAT */ diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 80de3f3fed..63a7d55b88 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -6,6 +6,9 @@ #ifndef __PINCTRL_H #define __PINCTRL_H +#define PINNAME_SIZE 10 +#define PINMUX_SIZE 40 + /** * struct pinconf_param - pin config parameters * @@ -66,6 +69,7 @@ struct pinconf_param { * pointing a config node. (necessary for pinctrl_full) * @set_state_simple: do needed pinctrl operations for a peripherl @periph. * (necessary for pinctrl_simple) + * @get_pin_muxing: display the muxing of a given pin. */ struct pinctrl_ops { int (*get_pins_count)(struct udevice *dev); @@ -129,6 +133,24 @@ struct pinctrl_ops { * @return mux value (SoC-specific, e.g. 0 for input, 1 for output) */ int (*get_gpio_mux)(struct udevice *dev, int banknum, int index); + + /** + * get_pin_muxing() - show pin muxing + * + * This allows to display the muxing of a given pin. It's useful for + * debug purpose to know if a pin is configured as GPIO or as an + * alternate function and which one. + * Typically it is used by a PINCTRL driver with knowledge of the SoC + * pinctrl setup. + * + * @dev: Pinctrl device to use + * @selector: Pin selector + * @buf Pin's muxing description + * @size Pin's muxing description length + * return 0 if OK, -ve on error + */ + int (*get_pin_muxing)(struct udevice *dev, unsigned int selector, + char *buf, int size); }; #define pinctrl_get_ops(dev) ((struct pinctrl_ops *)(dev)->driver->ops) @@ -348,4 +370,41 @@ int pinctrl_decode_pin_config(const void *blob, int node); */ int pinctrl_get_gpio_mux(struct udevice *dev, int banknum, int index); +/** + * pinctrl_get_pin_muxing() - Returns the muxing description + * + * This allows to display the muxing description of the given pin for + * debug purpose + * + * @dev: Pinctrl device to use + * @selector Pin index within pin-controller + * @buf Pin's muxing description + * @size Pin's muxing description length + * @return 0 if OK, -ve on error + */ +int pinctrl_get_pin_muxing(struct udevice *dev, int selector, char *buf, + int size); + +/** + * pinctrl_get_pins_count() - display pin-controller pins number + * + * This allows to know the number of pins owned by a given pin-controller + * + * @dev: Pinctrl device to use + * @return pins number if OK, -ve on error + */ +int pinctrl_get_pins_count(struct udevice *dev); + +/** + * pinctrl_get_pin_name() - Returns the pin's name + * + * This allows to display the pin's name for debug purpose + * + * @dev: Pinctrl device to use + * @selector Pin index within pin-controller + * @buf Pin's name + * @return 0 if OK, -ve on error + */ +int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf, + int size); #endif /* __PINCTRL_H */ diff --git a/include/dm/uclass.h b/include/dm/uclass.h index 4ef0d0f0c0..1bc62d523e 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -308,6 +308,18 @@ int uclass_first_device_err(enum uclass_id id, struct udevice **devp); int uclass_next_device(struct udevice **devp); /** + * uclass_next_device_err() - Get the next device in a uclass + * + * The device returned is probed if necessary, and ready for use + * + * @devp: On entry, pointer to device to lookup. On exit, returns pointer + * to the next device in the uclass if no error occurred, or -ENODEV if + * there is no next device. + * @return 0 if found, -ENODEV if not found, other -ve on error + */ +int uclass_next_device_err(struct udevice **devp); + +/** * uclass_first_device_check() - Get the first device in a uclass * * The device returned is probed if necessary, and ready for use @@ -381,4 +393,20 @@ int uclass_resolve_seq(struct udevice *dev); #define uclass_foreach_dev_safe(pos, next, uc) \ list_for_each_entry_safe(pos, next, &uc->dev_head, uclass_node) +/** + * uclass_foreach_dev_probe() - Helper function to iteration through devices + * of given uclass + * + * This creates a for() loop which works through the available devices in + * a uclass in order from start to end. Devices are probed if necessary, + * and ready for use. + * + * @id: Uclass ID + * @dev: struct udevice * to hold the current device. Set to NULL when there + * are no more devices. + */ +#define uclass_foreach_dev_probe(id, dev) \ + for (int _ret = uclass_first_device_err(id, &dev); !_ret && dev; \ + _ret = uclass_next_device_err(&dev)) + #endif diff --git a/include/serial.h b/include/serial.h index 020cd392e8..ec25db6e60 100644 --- a/include/serial.h +++ b/include/serial.h @@ -195,9 +195,7 @@ struct dm_serial_ops { * Set up a new config for this device. * * @dev: Device pointer - * @parity: parity to use - * @bits: bits number to use - * @stop: stop bits number to use + * @serial_config: number of bits, parity and number of stopbits to use * @return 0 if OK, -ve on error */ int (*setconfig)(struct udevice *dev, uint serial_config); diff --git a/include/w1.h b/include/w1.h index 399177a12e..b958b1c92c 100644 --- a/include/w1.h +++ b/include/w1.h @@ -12,6 +12,7 @@ #define W1_FAMILY_DS24B33 0x23 #define W1_FAMILY_DS2431 0x2d +#define W1_FAMILY_DS2502 0x09 #define W1_FAMILY_EEP_SANDBOX 0xfe struct w1_device { diff --git a/lib/libfdt/fdt_region.c b/lib/libfdt/fdt_region.c index d3b9a60e99..7e9fa9272e 100644 --- a/lib/libfdt/fdt_region.c +++ b/lib/libfdt/fdt_region.c @@ -96,6 +96,9 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count, break; case FDT_END_NODE: + /* Depth must never go below -1 */ + if (depth < 0) + return -FDT_ERR_BADSTRUCTURE; include = want; want = stack[depth--]; while (end > path && *--end != '/') diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 0627024e71..abfb0ff89f 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -82,7 +82,6 @@ CONFIG_AT91SAM9G20EK_2MMC CONFIG_AT91SAM9G45EKES CONFIG_AT91SAM9G45_LCD_BASE CONFIG_AT91SAM9M10G45EK -CONFIG_AT91SAM9_WATCHDOG CONFIG_AT91_CAN CONFIG_AT91_EFLASH CONFIG_AT91_GPIO_PULLUP diff --git a/test/py/tests/test_pinmux.py b/test/py/tests/test_pinmux.py new file mode 100644 index 0000000000..25394f1faf --- /dev/null +++ b/test/py/tests/test_pinmux.py @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0 + +import pytest +import u_boot_utils + +@pytest.mark.buildconfigspec('cmd_pinmux') +def test_pinmux_usage_1(u_boot_console): + """Test that 'pinmux' command without parameters displays + pinmux usage.""" + output = u_boot_console.run_command('pinmux') + assert 'Usage:' in output + +@pytest.mark.buildconfigspec('cmd_pinmux') +def test_pinmux_usage_2(u_boot_console): + """Test that 'pinmux status' executed without previous "pinmux dev" + command displays pinmux usage.""" + output = u_boot_console.run_command('pinmux status') + assert 'Usage:' in output + +@pytest.mark.buildconfigspec('cmd_pinmux') +@pytest.mark.boardspec('sandbox') +def test_pinmux_status_all(u_boot_console): + """Test that 'pinmux status -a' displays pin's muxing.""" + output = u_boot_console.run_command('pinmux status -a') + assert ('SCL : I2C SCL' in output) + assert ('SDA : I2C SDA' in output) + assert ('TX : Uart TX' in output) + assert ('RX : Uart RX' in output) + assert ('W1 : 1-wire gpio' in output) + +@pytest.mark.buildconfigspec('cmd_pinmux') +@pytest.mark.boardspec('sandbox') +def test_pinmux_list(u_boot_console): + """Test that 'pinmux list' returns the pin-controller list.""" + output = u_boot_console.run_command('pinmux list') + assert 'sandbox_pinctrl' in output + +@pytest.mark.buildconfigspec('cmd_pinmux') +def test_pinmux_dev_bad(u_boot_console): + """Test that 'pinmux dev' returns an error when trying to select a + wrong pin controller.""" + pincontroller = 'bad_pin_controller_name' + output = u_boot_console.run_command('pinmux dev ' + pincontroller) + expected_output = 'Can\'t get the pin-controller: ' + pincontroller + '!' + assert (expected_output in output) + +@pytest.mark.buildconfigspec('cmd_pinmux') +@pytest.mark.boardspec('sandbox') +def test_pinmux_dev(u_boot_console): + """Test that 'pinmux dev' select the wanted pin controller.""" + pincontroller = 'pinctrl' + output = u_boot_console.run_command('pinmux dev ' + pincontroller) + expected_output = 'dev: ' + pincontroller + assert (expected_output in output) + +@pytest.mark.buildconfigspec('cmd_pinmux') +@pytest.mark.boardspec('sandbox') +def test_pinmux_status(u_boot_console): + """Test that 'pinmux status' displays selected pincontroller's pin + muxing descriptions.""" + output = u_boot_console.run_command('pinmux status') + assert ('SCL : I2C SCL' in output) + assert ('SDA : I2C SDA' in output) + assert ('TX : Uart TX' in output) + assert ('RX : Uart RX' in output) + assert ('W1 : 1-wire gpio' in output) diff --git a/tools/k3_x509template.txt b/tools/k3_x509template.txt new file mode 100644 index 0000000000..bd3a9ab056 --- /dev/null +++ b/tools/k3_x509template.txt @@ -0,0 +1,48 @@ + [ req ] + distinguished_name = req_distinguished_name + x509_extensions = v3_ca + prompt = no + dirstring_type = nobmp + + [ req_distinguished_name ] + C = US + ST = TX + L = Dallas + O = Texas Instruments Incorporated + OU = Processors + CN = TI Support + emailAddress = support@ti.com + + [ v3_ca ] + basicConstraints = CA:true + 1.3.6.1.4.1.294.1.1 = ASN1:SEQUENCE:boot_seq + 1.3.6.1.4.1.294.1.2 = ASN1:SEQUENCE:image_integrity + 1.3.6.1.4.1.294.1.3 = ASN1:SEQUENCE:swrv +# 1.3.6.1.4.1.294.1.4 = ASN1:SEQUENCE:encryption + 1.3.6.1.4.1.294.1.8 = ASN1:SEQUENCE:debug + + [ boot_seq ] + certType = INTEGER:TEST_CERT_TYPE + bootCore = INTEGER:TEST_BOOT_CORE + bootCoreOpts = INTEGER:TEST_BOOT_ARCH_WIDTH + destAddr = FORMAT:HEX,OCT:TEST_BOOT_ADDR + imageSize = INTEGER:TEST_IMAGE_LENGTH + + [ image_integrity ] + shaType = OID:2.16.840.1.101.3.4.2.3 + shaValue = FORMAT:HEX,OCT:TEST_IMAGE_SHA_VAL + + [ swrv ] + swrv = INTEGER:0 + +# [ encryption ] +# initalVector = FORMAT:HEX,OCT:TEST_IMAGE_ENC_IV +# randomString = FORMAT:HEX,OCT:TEST_IMAGE_ENC_RS +# iterationCnt = INTEGER:TEST_IMAGE_KEY_DERIVE_INDEX +# salt = FORMAT:HEX,OCT:TEST_IMAGE_KEY_DERIVE_SALT + + [ debug ] + debugType = INTEGER:4 + coreDbgEn = INTEGER:0 + coreDbgSecEn = INTEGER:0 + debugUID = FORMAT:HEX,OCT:0000000000000000000000000000000000000000000000000000000000000000 |