summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/alaska/flash.c4
-rw-r--r--board/amcc/katmai/cmd_katmai.c4
-rw-r--r--board/barco/barco.c6
-rw-r--r--board/esd/du440/du440.c4
-rw-r--r--board/korat/korat.c74
-rw-r--r--board/lwmon5/sdram.c2
-rw-r--r--board/zeus/zeus.c2
-rw-r--r--common/cmd_bootm.c2
-rw-r--r--common/cmd_nand.c12
-rw-r--r--common/cmd_usb.c19
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c64
-rw-r--r--cpu/ppc4xx/4xx_enet.c2
-rw-r--r--cpu/ppc4xx/4xx_pcie.c12
-rw-r--r--cpu/ppc4xx/denali_spd_ddr2.c8
-rw-r--r--cpu/ppc4xx/tlb.c4
-rw-r--r--cpu/ppc4xx/traps.c26
-rw-r--r--drivers/mtd/nand/nand.c2
-rw-r--r--drivers/mtd/nand/nand_util.c6
-rw-r--r--drivers/net/ns8382x.c4
-rw-r--r--drivers/net/rtl8169.c2
-rw-r--r--drivers/pci/pci.c70
-rw-r--r--drivers/rtc/m41t60.c2
-rw-r--r--drivers/usb/usbdcore.c7
-rw-r--r--drivers/usb/usbdcore_ep0.c14
-rw-r--r--examples/test_burst.c8
-rw-r--r--include/asm-ppc/ppc4xx-sdram.h4
-rw-r--r--include/configs/katmai.h7
-rw-r--r--include/configs/korat.h11
-rw-r--r--lib_ppc/board.c2
29 files changed, 225 insertions, 159 deletions
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
index 383491f566..715616063c 100644
--- a/board/alaska/flash.c
+++ b/board/alaska/flash.c
@@ -670,7 +670,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%lx)\n", (ulong)addr, (ulong)*addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
@@ -712,7 +712,7 @@ static int write_data_block (flash_info_t * info, ulong src, ulong dest)
for (i = 0; i < WR_BLOCK; i++)
if ((*dstaddr++ & 0xff) != 0xff) {
printf ("not erased at %08lx (%lx)\n",
- (ulong) dstaddr, *dstaddr);
+ (ulong)dstaddr, (ulong)*dstaddr);
return (2);
}
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 439be4fa9d..703d225606 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -176,7 +176,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#endif
}
#ifdef DEBUG
- printf(" pin strap0 to write in i2c = %x\n", data);
+ printf(" pin strap0 to write in i2c = %lx\n", data);
#endif /* DEBUG */
if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
@@ -201,7 +201,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
data |= 0x05A50000;
#ifdef DEBUG
- printf(" pin strap1 to write in i2c = %x\n", data);
+ printf(" pin strap1 to write in i2c = %lx\n", data);
#endif /* DEBUG */
udelay(1000);
diff --git a/board/barco/barco.c b/board/barco/barco.c
index 72e7e0b050..f8b2084c45 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -177,7 +177,7 @@ unsigned update_flash (unsigned char *buf)
write_flash ((char *)buf, (*buf) & 0xFE);
*((unsigned char *)0xFF800000) = 0xF0;
udelay (100);
- printf ("buf [%#010x] %#010x\n", buf, (*buf));
+ printf ("buf [%#010x] %#010x\n", (unsigned)buf, (*buf));
/* XXX - fall through??? */
case BOOT_WORKING :
return BOOT_WORKING;
@@ -273,10 +273,10 @@ void barcobcd_boot (void)
/* give length of the kernel image to bootm */
sprintf (bootm_args[0],"%x",start->size);
/* give address of the kernel image to bootm */
- sprintf (bootm_args[1],"%x",buf);
+ sprintf (bootm_args[1],"%x",(unsigned)buf);
printf ("flash address: %#10x\n",start->address+8);
- printf ("buf address: %#10x\n",buf);
+ printf ("buf address: %#10x\n",(unsigned)buf);
/* aha, we reserve 8 bytes here... */
for (cnt = 0; cnt < start->size ; cnt++) {
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 3dbb2e135c..8765cc1f3e 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -956,9 +956,9 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
ret = run_command (cmd, 0);
end = get_ticks();
- printf("ticks=%d\n", (ulong)(end - start));
+ printf("ticks=%ld\n", (ulong)(end - start));
us = (ulong)((1000L * (end - start)) / (get_tbclk() / 1000));
- printf("usec=%d\n", us);
+ printf("usec=%ld\n", us);
return ret;
}
diff --git a/board/korat/korat.c b/board/korat/korat.c
index a7b4b27c6d..51874ea8db 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -26,12 +26,15 @@
*/
#include <common.h>
+#include <fdt_support.h>
#include <i2c.h>
+#include <libfdt.h>
#include <ppc440.h>
+#include <asm/bitops.h>
#include <asm/gpio.h>
-#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/bitops.h>
+#include <asm/ppc4xx-intvec.h>
+#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -566,43 +569,15 @@ int checkboard(void)
return 0;
}
-#if defined(CFG_DRAM_TEST)
-int testdram(void)
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices.
+ */
+void korat_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
- unsigned long *mem = (unsigned long *)0;
- const unsigned long kend = (1024 / sizeof(unsigned long));
- unsigned long k, n;
-
- mtmsr(0);
-
- /* TODO: find correct size of SDRAM */
- for (k = 0; k < CFG_MBYTES_SDRAM;
- ++k, mem += (1024 / sizeof(unsigned long))) {
- if ((k & 1023) == 0)
- printf("%3d MB\r", k / 1024);
-
- memset(mem, 0xaaaaaaaa, 1024);
- for (n = 0; n < kend; ++n) {
- if (mem[n] != 0xaaaaaaaa) {
- printf("SDRAM test fails at: %08x\n",
- (uint) & mem[n]);
- return 1;
- }
- }
-
- memset(mem, 0x55555555, 1024);
- for (n = 0; n < kend; ++n) {
- if (mem[n] != 0x55555555) {
- printf("SDRAM test fails at: %08x\n",
- (uint) & mem[n]);
- return 1;
- }
- }
- }
- printf("SDRAM test passes\n");
- return 0;
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
}
-#endif /* defined(CFG_DRAM_TEST) */
+#endif
/*
* pci_pre_init
@@ -654,6 +629,10 @@ int pci_pre_init(struct pci_controller *hose)
addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
mtdcr(plb1_acr, addr);
+#if defined(CONFIG_PCI_PNP)
+ hose->fixup_irq = korat_pci_fixup_irq;
+#endif
+
return 1;
}
#endif /* defined(CONFIG_PCI) */
@@ -779,3 +758,24 @@ int post_hotkeys_pressed(void)
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 val[4];
+ int rc;
+
+ ft_cpu_setup(blob, bd);
+
+ /* Fixup NOR mapping */
+ val[0] = 1; /* chip select number */
+ val[1] = 0; /* always 0 */
+ val[2] = gd->bd->bi_flashstart;
+ val[3] = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+ rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+ val, sizeof(val), 1);
+ if (rc)
+ printf("Unable to update property NOR mapping, err=%s\n",
+ fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 0a13831156..189e824073 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -84,7 +84,7 @@ void board_add_ram_info(int use_default)
puts(" (ECC not");
get_sys_info(&board_cfg);
- printf(" enabled, %d MHz", (board_cfg.freqPLB * 2) / 1000000);
+ printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
mfsdram(DDR0_03, val);
val = DDR0_03_CASLAT_DECODE(val);
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 0113d4845e..33d971ab02 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -280,7 +280,7 @@ static int restore_default(void)
} else {
crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
if (crc != *(u32 *)buf) {
- printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32 *)buf);
+ printf("ERROR: crc mismatch %08x %08x\n", crc, *(u32 *)buf);
return -1;
}
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 959689ea7a..f701ab6f7c 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -613,7 +613,7 @@ static void *boot_get_kernel (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
return NULL;
}
- debug (" kernel data at 0x%08lx, len = 0x%08lx (%d)\n",
+ debug (" kernel data at 0x%08lx, len = 0x%08lx (%ld)\n",
*os_data, *os_len, *os_len);
return (void *)img_addr;
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index e20c1af353..cc7c5ba241 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -55,11 +55,11 @@ static int nand_dump(nand_info_t *nand, ulong off)
off &= ~(nand->oobblock - 1);
i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
if (i < 0) {
- printf("Error (%d) reading page %08x\n", i, off);
+ printf("Error (%d) reading page %08lx\n", i, off);
free(buf);
return 1;
}
- printf("Page %08x dump:\n", off);
+ printf("Page %08lx dump:\n", off);
i = nand->oobblock >> 4; p = buf;
while (i--) {
printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
@@ -149,7 +149,7 @@ out:
if (*size == nand->size)
puts("whole chip\n");
else
- printf("offset 0x%x, size 0x%x\n", *off, *size);
+ printf("offset 0x%lx, size 0x%x\n", *off, *size);
return 0;
}
@@ -181,7 +181,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
putc('\n');
for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
- printf("Device %d: %s, sector size %lu KiB\n",
+ printf("Device %d: %s, sector size %u KiB\n",
i, nand_info[i].name,
nand_info[i].erasesize >> 10);
}
@@ -238,7 +238,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
printf("\nDevice %d bad blocks:\n", nand_curr_device);
for (off = 0; off < nand->size; off += nand->erasesize)
if (nand_block_isbad(nand, off))
- printf(" %08x\n", off);
+ printf(" %08lx\n", off);
return 0;
}
@@ -417,7 +417,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
if (off == nand->size - nand->oobblock
|| (s != last_status && off != 0)) {
- printf("%08x - %08x: %8d pages %s%s%s\n",
+ printf("%08lx - %08lx: %8lu pages %s%s%s\n",
block_start,
off-1,
(off-block_start)/nand->oobblock,
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index f2795d3f40..30caa98ea7 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -554,13 +554,24 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
if (strncmp(argv[1],"part",4) == 0) {
- int devno, ok;
- for (ok=0, devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
+ int devno, ok = 0;
+ if (argc==2) {
+ for (devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
+ stor_dev=usb_stor_get_dev(devno);
+ if (stor_dev->type!=DEV_TYPE_UNKNOWN) {
+ ok++;
+ if (devno)
+ printf("\n");
+ printf("print_part of %x\n",devno);
+ print_part(stor_dev);
+ }
+ }
+ }
+ else {
+ devno=simple_strtoul(argv[2], NULL, 16);
stor_dev=usb_stor_get_dev(devno);
if (stor_dev->type!=DEV_TYPE_UNKNOWN) {
ok++;
- if (devno)
- printf("\n");
printf("print_part of %x\n",devno);
print_part(stor_dev);
}
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index c28fc463b5..a27e276f25 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -138,6 +138,20 @@
#endif
/*
+ * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ * To support such configurations, we "only" map the first 2GB via the TLB's. We
+ * need some free virtual address space for the remaining peripherals like, SoC
+ * devices, FLASH etc.
+ *
+ * Note that ECC is currently not supported on configurations with more than 2GB
+ * SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ * the ECC parity byte of the remaining area can't be written.
+ */
+#ifndef CONFIG_MAX_MEM_MAPPED
+#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
+#endif
+
+/*
* Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
*/
void __spd_ddr_init_hang (void)
@@ -181,7 +195,7 @@ typedef enum ddr_cas_id {
/*-----------------------------------------------------------------------------+
* Prototypes
*-----------------------------------------------------------------------------*/
-static unsigned long sdram_memsize(void);
+static phys_size_t sdram_memsize(void);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -306,9 +320,9 @@ static unsigned char spd_read(uchar chip, uint addr)
/*-----------------------------------------------------------------------------+
* sdram_memsize
*-----------------------------------------------------------------------------*/
-static unsigned long sdram_memsize(void)
+static phys_size_t sdram_memsize(void)
{
- unsigned long mem_size;
+ phys_size_t mem_size;
unsigned long mcopt2;
unsigned long mcstat;
unsigned long mb0cf;
@@ -364,6 +378,8 @@ static unsigned long sdram_memsize(void)
mem_size+=4096;
break;
default:
+ printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n"
+ , sdsz);
mem_size=0;
break;
}
@@ -371,8 +387,7 @@ static unsigned long sdram_memsize(void)
}
}
- mem_size *= 1024 * 1024;
- return(mem_size);
+ return mem_size << 20;
}
/*-----------------------------------------------------------------------------+
@@ -400,7 +415,7 @@ phys_size_t initdram(int board_type)
unsigned long val;
ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
int write_recovery;
- unsigned long dram_size = 0;
+ phys_size_t dram_size = 0;
num_dimm_banks = sizeof(iic0_dimm_addr);
@@ -558,6 +573,12 @@ phys_size_t initdram(int board_type)
/* get installed memory size */
dram_size = sdram_memsize();
+ /*
+ * Limit size to 2GB
+ */
+ if (dram_size > CONFIG_MAX_MEM_MAPPED)
+ dram_size = CONFIG_MAX_MEM_MAPPED;
+
/* and program tlb entries for this size (dynamic) */
/*
@@ -595,7 +616,7 @@ phys_size_t initdram(int board_type)
*/
set_mcsr(get_mcsr());
- return dram_size;
+ return sdram_memsize();
}
static void get_spd_info(unsigned long *dimm_populated,
@@ -839,8 +860,8 @@ static void check_rank_number(unsigned long *dimm_populated,
if (dimm_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with %d ranks in "
- "slot %d is not supported.\n", dimm_rank, dimm_num);
+ printf("ERROR: DRAM DIMM detected with %lu ranks in "
+ "slot %lu is not supported.\n", dimm_rank, dimm_num);
printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
printf("Replace the DIMM module with a supported DIMM.\n\n");
spd_ddr_init_hang ();
@@ -1041,7 +1062,7 @@ static void program_copt1(unsigned long *dimm_populated,
dimm_32bit = TRUE;
break;
default:
- printf("WARNING: Detected a DIMM with a data width of %d bits.\n",
+ printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
data_width);
printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
break;
@@ -1594,7 +1615,7 @@ static void program_mode(unsigned long *dimm_populated,
printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
printf("cas3=%d cas4=%d cas5=%d\n",
cas_3_0_available, cas_4_0_available, cas_5_0_available);
- printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n",
+ printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n",
sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
spd_ddr_init_hang ();
}
@@ -2133,15 +2154,15 @@ static void program_memory_queue(unsigned long *dimm_populated,
unsigned long num_dimm_banks)
{
unsigned long dimm_num;
- unsigned long rank_base_addr;
+ phys_size_t rank_base_addr;
unsigned long rank_reg;
- unsigned long rank_size_bytes;
+ phys_size_t rank_size_bytes;
unsigned long rank_size_id;
unsigned long num_ranks;
unsigned long baseadd_size;
unsigned long i;
unsigned long bank_0_populated = 0;
- unsigned long total_size = 0;
+ phys_size_t total_size = 0;
/*------------------------------------------------------------------
* Reset the rank_base_address.
@@ -2289,6 +2310,11 @@ static void program_ecc(unsigned long *dimm_populated,
if (ecc == 0)
return;
+ if (sdram_memsize() > CONFIG_MAX_MEM_MAPPED) {
+ printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
+ return;
+ }
+
mfsdram(SDRAM_MCOPT1, mcopt1);
mfsdram(SDRAM_MCOPT2, mcopt2);
@@ -2441,6 +2467,7 @@ static int short_mem_test(void)
u32 bxcf;
int i;
int j;
+ phys_size_t base_addr;
u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
@@ -2467,10 +2494,17 @@ static int short_mem_test(void)
if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
/* Bank is enabled */
+ /*
+ * Only run test on accessable memory (below 2GB)
+ */
+ base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
+ if (base_addr >= CONFIG_MAX_MEM_MAPPED)
+ continue;
+
/*------------------------------------------------------------------
* Run the short memory test.
*-----------------------------------------------------------------*/
- membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+ membase = (u32 *)(u32)base_addr;
for (i = 0; i < NUMMEMTESTS; i++) {
for (j = 0; j < NUMMEMWORDS; j++) {
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index c40e0ca480..4e863dc911 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1076,7 +1076,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096);
if (!bd_cached) {
- printf("%s: Error allocating MAL descriptor buffers!\n");
+ printf("%s: Error allocating MAL descriptor buffers!\n", __func__);
return -1;
}
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 503facca30..d50a538e38 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -615,22 +615,20 @@ int __ppc4xx_init_pcie_port_hw(int port, int rootport)
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
{
- u32 val = 1 << 24;
+ u32 val;
u32 utlset1;
- if (rootport) {
+ if (rootport)
val = PTYPE_ROOT_PORT << 20;
- utlset1 = 0x21222222;
- } else {
+ else
val = PTYPE_LEGACY_ENDPOINT << 20;
- utlset1 = 0x20222222;
- }
if (port == 0) {
val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
} else {
val |= LNKW_X4 << 12;
- utlset1 |= 0x00101101;
+ utlset1 = 0x20101101;
}
SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
index 3bd637567c..670fc5c6ed 100644
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -339,7 +339,7 @@ static void get_spd_info(unsigned long dimm_ranks[],
"\n", dimm_num, ranks_on_dimm);
if (ranks_on_dimm > max_ranks_per_dimm) {
printf("WARNING: DRAM DIMM in slot %lu has %lu "
- "ranks.\n");
+ "ranks.\n", dimm_num, ranks_on_dimm);
if (1 == max_ranks_per_dimm) {
printf("Only one rank will be used.\n");
} else {
@@ -668,8 +668,8 @@ static void program_ddr0_03(unsigned long dimm_ranks[],
"and 5.0 are supported.\n");
printf("Make sure the PLB speed is within the supported range "
"of the DIMMs.\n");
- printf("sdram_freq=%d cycle2=%d cycle3=%d cycle4=%d "
- "cycle5=%d\n\n", sdram_freq, cycle_2_0_clk,
+ printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
+ "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
spd_ddr_init_hang();
}
@@ -1248,7 +1248,7 @@ void board_add_ram_info(int use_default)
if (!is_ecc_enabled()) {
printf(" not");
}
- printf(" enabled, %d MHz", (2 * get_bus_freq(0)) / 1000000);
+ printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
mfsdram(DDR0_03, val);
printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index f44822dbab..24a9a9cc28 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -316,12 +316,12 @@ static void program_tlb_addr(u64 phys_addr,
virt_addr += TLB_1KB_SIZE;
}
} else {
- printf("ERROR: no TLB size exists for the base address 0x%0X.\n",
+ printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
phys_addr);
}
if (rc != 0)
- printf("ERROR: no TLB entries available for the base addr 0x%0X.\n",
+ printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
phys_addr);
}
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index 8b7e32a17b..55154b6f01 100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -214,7 +214,7 @@ MachineCheckException(struct pt_regs *regs)
}
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
mfsdram(DDR0_00, val) ;
- printf("DDR0: DDR0_00 %p\n", val);
+ printf("DDR0: DDR0_00 %lx\n", val);
val = (val >> 16) & 0xff;
if (val & 0x80)
printf("DDR0: At least one interrupt active\n");
@@ -263,44 +263,44 @@ MachineCheckException(struct pt_regs *regs)
break;
default:
mfsdram(DDR0_01, value2);
- printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2);
+ printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
}
mfsdram(DDR0_23, val);
if (((val >> 16) & 0xff) && corr_ecc)
- printf("DDR0: Syndrome for correctable ECC event 0x%x\n",
+ printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
(val >> 16) & 0xff);
mfsdram(DDR0_23, val);
if (((val >> 8) & 0xff) && uncorr_ecc)
- printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n",
+ printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
(val >> 8) & 0xff);
mfsdram(DDR0_33, val);
if (val)
printf("DDR0: Address of command that caused an "
- "Out-of-Range interrupt %p\n", val);
+ "Out-of-Range interrupt %lx\n", val);
mfsdram(DDR0_34, val);
if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
mfsdram(DDR0_35, val);
if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %p\n", val);
+ printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
mfsdram(DDR0_36, val);
if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
mfsdram(DDR0_37, val);
if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
mfsdram(DDR0_38, val);
if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %p\n", val);
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
mfsdram(DDR0_39, val);
if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %p\n", val);
+ printf("DDR0: Address of correctable ECC event %lx\n", val);
mfsdram(DDR0_40, val);
if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
mfsdram(DDR0_41, val);
if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
+ printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
#endif /* CONFIG_440EPX */
#endif /* CONFIG_440 */
show_regs(regs);
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c
index 27b5792bcc..e44470eb6c 100644
--- a/drivers/mtd/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
@@ -70,7 +70,7 @@ void nand_init(void)
if (nand_curr_device == -1)
nand_curr_device = i;
}
- printf("%lu MiB\n", size / (1024 * 1024));
+ printf("%u MiB\n", size / (1024 * 1024));
#ifdef CFG_NAND_SELECT_DEVICE
/*
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index c82f77b555..828cc338ad 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -154,7 +154,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
}
if (erase_length < meminfo->erasesize) {
- printf("Warning: Erase size 0x%08x smaller than one " \
+ printf("Warning: Erase size 0x%08lx smaller than one " \
"erase block 0x%08x\n",erase_length, meminfo->erasesize);
printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
erase_length = meminfo->erasesize;
@@ -498,7 +498,7 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
* on (slow) serial consoles
*/
if (percent != percent_complete) {
- printf("\rWriting data at 0x%x "
+ printf("\rWriting data at 0x%lx "
"-- %3d%% complete.",
mtdoffset, percent);
percent_complete = percent;
@@ -678,7 +678,7 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
*/
if (percent != percent_complete) {
if (!opts->quiet)
- printf("\rReading data from 0x%x "
+ printf("\rReading data from 0x%lx "
"-- %3d%% complete.",
mtdoffset, percent);
percent_complete = percent;
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
index 0b9a3ae66d..bb5843815f 100644
--- a/drivers/net/ns8382x.c
+++ b/drivers/net/ns8382x.c
@@ -770,14 +770,14 @@ ns8382x_send(struct eth_device *dev, volatile void *packet, int length)
for (i = 0; (tx_stat = le32_to_cpu(txd.cmdsts)) & DescOwn; i++) {
if (i >= TOUT_LOOP) {
- printf ("%s: tx error buffer not ready: txd.cmdsts %#X\n",
+ printf ("%s: tx error buffer not ready: txd.cmdsts %#lX\n",
dev->name, tx_stat);
goto Done;
}
}
if (!(tx_stat & DescPktOK)) {
- printf("ns8382x_send: Transmit error, Tx status %X.\n", tx_stat);
+ printf("ns8382x_send: Transmit error, Tx status %lX.\n", tx_stat);
goto Done;
}
#ifdef NS8382X_DEBUG
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 7423bc0eb8..d069afbe22 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -392,7 +392,7 @@ static int rtl8169_init_board(struct eth_device *dev)
/* if unknown chip, assume array element #0, original RTL-8169 in this case */
printf("PCI device %s: unknown chip version, assuming RTL-8169\n", dev->name);
- printf("PCI device: TxConfig = 0x%hX\n", (unsigned long) RTL_R32(TxConfig));
+ printf("PCI device: TxConfig = 0x%lX\n", (unsigned long) RTL_R32(TxConfig));
tpc->chipset = 0;
match:
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b3ae3b152c..16180cbe51 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -411,6 +411,40 @@ void pci_cfgfunc_do_nothing(struct pci_controller *hose,
extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
extern void pciauto_config_init(struct pci_controller *hose);
+int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ /*
+ * Check if pci device should be skipped in configuration
+ */
+ if (dev == PCI_BDF(hose->first_busno, 0, 0)) {
+#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
+ /*
+ * Only skip configuration if "pciconfighost" is not set
+ */
+ if (getenv("pciconfighost") == NULL)
+ return 1;
+#else
+ return 1;
+#endif
+ }
+
+ return 0;
+}
+int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
+ __attribute__((weak, alias("__pci_skip_dev")));
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
+{
+ if (dev == PCI_BDF(hose->first_busno, 0, 0))
+ return 0;
+
+ return 1;
+}
+int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
+ __attribute__((weak, alias("__pci_print_dev")));
+#endif /* CONFIG_PCI_SCAN_SHOW */
+
int pci_hose_scan_bus(struct pci_controller *hose, int bus)
{
unsigned int sub_bus, found_multi=0;
@@ -423,21 +457,10 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
for (dev = PCI_BDF(bus,0,0);
dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
- dev += PCI_BDF(0,0,1))
- {
- /* Skip our host bridge */
- if ( dev == PCI_BDF(hose->first_busno,0,0) ) {
-#if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE) /* don't skip host bridge */
- /*
- * Only skip hostbridge configuration if "pciconfighost" is not set
- */
- if (getenv("pciconfighost") == NULL) {
- continue; /* Skip our host bridge */
- }
-#else
- continue; /* Skip our host bridge */
-#endif
- }
+ dev += PCI_BDF(0,0,1)) {
+
+ if (pci_skip_dev(hose, dev))
+ continue;
if (PCI_FUNC(dev) && !found_multi)
continue;
@@ -473,15 +496,14 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
hose->fixup_irq(hose, dev);
#ifdef CONFIG_PCI_SCAN_SHOW
- /* Skip our host bridge */
- if ( dev != PCI_BDF(hose->first_busno,0,0) ) {
- unsigned char int_line;
-
- pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,
- &int_line);
- printf(" %02x %02x %04x %04x %04x %02x\n",
- PCI_BUS(dev), PCI_DEV(dev), vendor, device, class,
- int_line);
+ if (pci_print_dev(hose, dev)) {
+ unsigned char int_line;
+
+ pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,
+ &int_line);
+ printf(" %02x %02x %04x %04x %04x %02x\n",
+ PCI_BUS(dev), PCI_DEV(dev), vendor, device, class,
+ int_line);
}
#endif
}
diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c
index 8a32ea0748..ef135cab38 100644
--- a/drivers/rtc/m41t60.c
+++ b/drivers/rtc/m41t60.c
@@ -241,7 +241,7 @@ void rtc_reset(void)
if (l <= 0x3F) {
if ((data[RTC_CTRL] & 0x3F) != l) {
- printf("Setting RTC calibration to 0x%02X\n",
+ printf("Setting RTC calibration to 0x%02lX\n",
l);
data[RTC_CTRL] &= 0xC0;
data[RTC_CTRL] |= (uchar) l;
diff --git a/drivers/usb/usbdcore.c b/drivers/usb/usbdcore.c
index 308c7ceccc..a621ce7a39 100644
--- a/drivers/usb/usbdcore.c
+++ b/drivers/usb/usbdcore.c
@@ -146,12 +146,9 @@ struct usb_string_descriptor *usbd_get_string (__u8 index)
static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device,
unsigned int port, unsigned int configuration)
{
- /* XXX */
- configuration = configuration ? configuration - 1 : 0;
-
- if (configuration >= device->configurations) {
+ if (configuration >= device->configurations)
return NULL;
- }
+
return device->configuration_instance_array + configuration;
}
diff --git a/drivers/usb/usbdcore_ep0.c b/drivers/usb/usbdcore_ep0.c
index 1e44f322a7..cf3f3826cb 100644
--- a/drivers/usb/usbdcore_ep0.c
+++ b/drivers/usb/usbdcore_ep0.c
@@ -235,8 +235,8 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
return -1;
}
/*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
- if (index > device_descriptor->bNumConfigurations) {
- dbg_ep0 (0, "index too large: %d > %d", index,
+ if (index >= device_descriptor->bNumConfigurations) {
+ dbg_ep0 (0, "index too large: %d >= %d", index,
device_descriptor->
bNumConfigurations);
return -1;
@@ -571,14 +571,8 @@ int ep0_recv_setup (struct urb *urb)
case USB_REQ_SET_CONFIGURATION:
/* c.f. 9.4.7 - the top half of wValue is reserved */
- /* */
- if ((device->configuration =
- le16_to_cpu (request->wValue) & 0xFF80) != 0) {
- /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
- /* is the same is configuration zero */
- serial_printf("error setting dev->config to zero!\n");
- device->configuration = 0; /* TBR - ?????? */
- }
+ device->configuration = le16_to_cpu(request->wValue) & 0xff;
+
/* reset interface and alternate settings */
device->interface = device->alternate = 0;
diff --git a/examples/test_burst.c b/examples/test_burst.c
index f09707ff90..3157bc8b00 100644
--- a/examples/test_burst.c
+++ b/examples/test_burst.c
@@ -173,7 +173,7 @@ static int test_burst_start (unsigned long size, unsigned long pattern)
int i, n;
int res = 1;
- printf ("Test pattern %08x ...", pattern);
+ printf ("Test pattern %08lx ...", pattern);
n = size / 4;
@@ -248,7 +248,7 @@ static void test_desc(unsigned long size)
{
printf(
"The following tests will be conducted:\n"
- "1) Map %d-byte region of physical RAM at 0x%08x\n"
+ "1) Map %ld-byte region of physical RAM at 0x%08x\n"
" into two virtual regions:\n"
" one cached at 0x%08x and\n"
" the the other uncached at 0x%08x.\n",
@@ -277,8 +277,8 @@ static void test_error(
p[1] = val;
p[2] = pattern;
- printf ("\nError at step %s, addr %08x: read %08x, pattern %08x",
- step, addr, val, pattern);
+ printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx",
+ (unsigned long)step, addr, val, pattern);
}
static void signal_init(void)
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h
index 83931f17f5..e151f0c113 100644
--- a/include/asm-ppc/ppc4xx-sdram.h
+++ b/include/asm-ppc/ppc4xx-sdram.h
@@ -284,8 +284,8 @@
#if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
#define SDRAM_RXBAS_SDBA_MASK 0xFFE00000 /* Base address */
-#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((u32)(n))&0xFFE00000)>>2)
-#define SDRAM_RXBAS_SDBA_DECODE(n) ((((u32)(n))&0xFFE00000)<<2)
+#define SDRAM_RXBAS_SDBA_ENCODE(n) ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
+#define SDRAM_RXBAS_SDBA_DECODE(n) ((((phys_size_t)(n)) & 0xFFE00000) << 2)
#endif /* CONFIG_440SPE */
#if defined(CONFIG_440SP)
#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index d3789bd67a..f07e470683 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -41,6 +41,13 @@
#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
/*
+ * Enable this board for more than 2GB of SDRAM
+ */
+#define CONFIG_PHYS_64BIT
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
+
+/*
* Include common defines/options for all AMCC eval boards
*/
#define CONFIG_HOSTNAME katmai
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 765566697f..4ca4ed0066 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -129,7 +129,7 @@
#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
@@ -145,7 +145,6 @@
#define CONFIG_DDR_ECC /* Use ECC when available */
#define SPD_EEPROM_ADDRESS {0x50}
#define CONFIG_PROG_SDRAM_TLB
-#define CFG_DRAM_TEST
#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
/* 440EPx errata CHIP 11 */
@@ -185,7 +184,7 @@
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
CFG_BOOTFILE \
CFG_ROOTPATH \
"netdev=eth0\0" \
@@ -216,7 +215,7 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */
#define CONFIG_PHY_DYNAMIC_ANEG 1
@@ -548,4 +547,8 @@
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
#endif /* __CONFIG_H */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 9afa88a700..1bc2f46d46 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -786,7 +786,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
*/
s = getenv ("flashchecksum");
if (s && (*s == 'y')) {
- printf (" CRC: %08lX",
+ printf (" CRC: %08X",
crc32 (0, (const unsigned char *) CFG_FLASH_BASE, flash_size)
);
}
generated by cgit (git 2.34.1) at 2024-12-29 09:09:26 +0000