diff options
-rw-r--r-- | arch/arm/dts/uniphier-pxs3-ref.dts | 29 | ||||
-rw-r--r-- | arch/arm/dts/uniphier-pxs3.dtsi | 163 |
2 files changed, 142 insertions, 50 deletions
diff --git a/arch/arm/dts/uniphier-pxs3-ref.dts b/arch/arm/dts/uniphier-pxs3-ref.dts index cb1eef43c4..1118dd7c6e 100644 --- a/arch/arm/dts/uniphier-pxs3-ref.dts +++ b/arch/arm/dts/uniphier-pxs3-ref.dts @@ -4,13 +4,12 @@ * Copyright (C) 2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * SPDX-License-Identifier: GPL-2.0+ X11 + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; -/include/ "uniphier-pxs3.dtsi" -/include/ "uniphier-ref-daughter.dtsi" -/include/ "uniphier-support-card.dtsi" +#include "uniphier-pxs3.dtsi" +#include "uniphier-support-card.dtsi" / { model = "UniPhier PXs3 Reference Board"; @@ -39,7 +38,7 @@ }; ðsc { - interrupts = <0 48 4>; + interrupts = <0 52 4>; }; &serial0 { @@ -49,3 +48,23 @@ &i2c0 { status = "okay"; }; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index cdf7f9005f..8944005ac0 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -4,46 +4,10 @@ * Copyright (C) 2017 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/memreserve/ 0x80000000 0x00080000; +/memreserve/ 0x80000000 0x02000000; / { compatible = "socionext,uniphier-pxs3"; @@ -76,28 +40,74 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x000>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x001>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x002>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x003>; + clocks = <&sys_clk 33>; enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; + }; + }; + + cluster0_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + clock-latency-ns = <300>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + clock-latency-ns = <300>; + }; + opp-666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp-866667000 { + opp-hz = /bits/ 64 <866667000>; + clock-latency-ns = <300>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + clock-latency-ns = <300>; }; }; @@ -172,6 +182,22 @@ clock-frequency = <58820000>; }; + gpio: gpio@55000000 { + compatible = "socionext,uniphier-pxs3-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 96 0 0>, + <&pinctrl 160 0 0>; + gpio-ranges-group-names = "gpio_range0", + "gpio_range1", + "gpio_range2"; + }; + i2c0: i2c@58780000 { compatible = "socionext,uniphier-fi2c"; status = "disabled"; @@ -205,6 +231,8 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; clocks = <&peri_clk 6>; clock-frequency = <100000>; }; @@ -251,7 +279,7 @@ sdctrl@59810000 { compatible = "socionext,uniphier-pxs3-sdctrl", "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; + reg = <0x59810000 0x400>; sd_clk: clock { compatible = "socionext,uniphier-pxs3-sd-clock"; @@ -282,7 +310,6 @@ emmc: sdhc@5a000000 { compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; - status = "disabled"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; pinctrl-names = "default"; @@ -291,6 +318,11 @@ bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + cdns,phy-input-delay-legacy = <4>; + cdns,phy-input-delay-mmc-highspeed = <2>; + cdns,phy-input-delay-mmc-ddr = <3>; + cdns,phy-dll-delay-sdclk = <21>; + cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; sd: sdhc@5a400000 { @@ -317,9 +349,11 @@ }; }; - aidet@5fc20000 { - compatible = "simple-mfd", "syscon"; + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pxs3-aidet"; reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; }; gic: interrupt-controller@5fe00000 { @@ -345,10 +379,50 @@ compatible = "socionext,uniphier-pxs3-reset"; #reset-cells = <1>; }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + }; + + usb0: usb@65b00000 { + compatible = "socionext,uniphier-pxs3-dwc3"; + status = "disabled"; + reg = <0x65b00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + dwc3@65a00000 { + compatible = "snps,dwc3"; + reg = <0x65a00000 0x10000>; + interrupts = <0 134 4>; + dr_mode = "host"; + tx-fifo-resize; + }; + }; + + usb1: usb@65d00000 { + compatible = "socionext,uniphier-pxs3-dwc3"; + status = "disabled"; + reg = <0x65d00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + dwc3@65c00000 { + compatible = "snps,dwc3"; + reg = <0x65c00000 0x10000>; + interrupts = <0 137 4>; + dr_mode = "host"; + tx-fifo-resize; + }; }; nand: nand@68000000 { - compatible = "socionext,denali-nand-v5b"; + compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; @@ -356,9 +430,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; clocks = <&sys_clk 2>; - nand-ecc-strength = <8>; }; }; }; -/include/ "uniphier-pinctrl.dtsi" +#include "uniphier-pinctrl.dtsi" |