diff options
-rwxr-xr-x | MAKEALL | 28 | ||||
-rw-r--r-- | Makefile | 82 | ||||
-rw-r--r-- | arch/sh/config.mk | 2 | ||||
-rw-r--r-- | arch/sh/lib/bootm.c | 66 | ||||
-rw-r--r-- | board/a4m072/a4m072.c | 62 | ||||
-rw-r--r-- | board/renesas/sh7785lcr/config.mk | 4 | ||||
-rw-r--r-- | boards.cfg | 13 | ||||
-rw-r--r-- | common/usb_storage.c | 2 | ||||
-rw-r--r-- | doc/README.LED_display | 1 | ||||
-rw-r--r-- | drivers/mtd/cfi_flash.c | 28 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ehci-pci.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/ehci.h | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.h | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_hcd.c | 36 | ||||
-rw-r--r-- | include/configs/a4m072.h | 59 | ||||
-rw-r--r-- | include/configs/sh7785lcr.h | 6 | ||||
-rw-r--r-- | include/led-display.h | 1 |
19 files changed, 202 insertions, 200 deletions
@@ -609,31 +609,11 @@ LIST_blackfin="$(boards_by_arch blackfin) ## SH Systems ######################################################################### -LIST_sh2=" \ - rsk7203 \ -" -LIST_sh3=" \ - mpr2 \ - ms7720se \ -" +LIST_sh2="$(boards_by_cpu sh2)" +LIST_sh3="$(boards_by_cpu sh3)" +LIST_sh4="$(boards_by_cpu sh4)" -LIST_sh4=" \ - ms7750se \ - ms7722se \ - MigoR \ - r7780mp \ - r2dplus \ - sh7763rdp \ - sh7785lcr \ - ap325rxa \ - espt \ -" - -LIST_sh=" \ - ${LIST_sh2} \ - ${LIST_sh3} \ - ${LIST_sh4} \ -" +LIST_sh="$(boards_by_arch sh)" ######################################################################### ## SPARC Systems @@ -1184,88 +1184,6 @@ bf527-ezkit-v2_config : unconfig @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ bf527-ezkit blackfin blackfin bf527-ezkit -#======================================================================== -# SH3 (SuperH) -#======================================================================== - -######################################################################### -## sh2 (Renesas SuperH) -######################################################################### -rsk7203_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas - -######################################################################### -## sh3 (Renesas SuperH) -######################################################################### - -mpr2_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh3 mpr2 - -ms7720se_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh3 ms7720se - -######################################################################### -## sh4 (Renesas SuperH) -######################################################################### - -MigoR_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 MigoR renesas - -ms7750se_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ms7750se - -ms7722se_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ms7722se - -r2dplus_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas - -r7780mp_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas - -sh7763rdp_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas - -sh7785lcr_32bit_config \ -sh7785lcr_config : unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)board/renesas/sh7785lcr - @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h - @if [ "$(findstring 32bit, $@)" ] ; then \ - echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ - echo "CONFIG_SYS_TEXT_BASE = 0x8ff80000" > \ - $(obj)board/renesas/sh7785lcr/config.tmp ; \ - fi - @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas - -ap325rxa_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas - -espt_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 espt - ######################################################################### ######################################################################### diff --git a/arch/sh/config.mk b/arch/sh/config.mk index 07ba68f198..415c949798 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -29,6 +29,6 @@ STANDALONE_LOAD_ADDR += -EB endif PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ -PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE) +PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE) LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index 9c58ed7ec8..f38d0b0e8e 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -43,6 +43,41 @@ static void hexdump(unsigned char *buf, int len) } #endif +#define MOUNT_ROOT_RDONLY 0x000 +#define RAMDISK_FLAGS 0x004 +#define ORIG_ROOT_DEV 0x008 +#define LOADER_TYPE 0x00c +#define INITRD_START 0x010 +#define INITRD_SIZE 0x014 +#define COMMAND_LINE 0x100 + +#define RD_PROMPT (1<<15) +#define RD_DOLOAD (1<<14) +#define CMD_ARG_RD_PROMPT "prompt_ramdisk=" +#define CMD_ARG_RD_DOLOAD "load_ramdisk=" + +#ifdef CONFIG_SH_SDRAM_OFFSET +#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET) +#else +#define GET_INITRD_START(initrd, linux) (initrd - linux) +#endif + +static void set_sh_linux_param(unsigned long param_addr, unsigned long data) +{ + *(unsigned long *)(param_addr) = data; +} + +static unsigned long sh_check_cmd_arg(char *cmdline, char *key, int base) +{ + unsigned long val = 0; + char *p = strstr(cmdline, key); + if (p) { + p += strlen(key); + val = simple_strtol(p, NULL, base); + } + return val; +} + int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* Linux kernel load address */ @@ -51,7 +86,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima unsigned char *param = (unsigned char *)image_get_load(images->legacy_hdr_os); /* Linux kernel command line */ - char *cmdline = (char *)param + 0x100; + char *cmdline = (char *)param + COMMAND_LINE; /* PAGE_SIZE */ unsigned long size = images->ep - (unsigned long)param; char *bootargs = getenv("bootargs"); @@ -61,8 +96,37 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima /* Setup parameters */ memset(param, 0, size); /* Clear zero page */ + + /* Set commandline */ strcpy(cmdline, bootargs); + sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + /* Initrd */ + if (images->rd_start || images->rd_end) { + unsigned long ramdisk_flags = 0; + int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10); + if (val == 1) + ramdisk_flags |= RD_PROMPT; + else + ramdisk_flags &= ~RD_PROMPT; + + val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + if (val == 1) + ramdisk_flags |= RD_DOLOAD; + else + ramdisk_flags &= ~RD_DOLOAD; + + set_sh_linux_param((unsigned long)param + MOUNT_ROOT_RDONLY, 0x0001); + set_sh_linux_param((unsigned long)param + RAMDISK_FLAGS, ramdisk_flags); + set_sh_linux_param((unsigned long)param + ORIG_ROOT_DEV, 0x0200); + set_sh_linux_param((unsigned long)param + LOADER_TYPE, 0x0001); + set_sh_linux_param((unsigned long)param + INITRD_START, + GET_INITRD_START(images->rd_start, CONFIG_SYS_SDRAM_BASE)); + set_sh_linux_param((unsigned long)param + INITRD_SIZE, + images->rd_end - images->rd_start); + } + + /* Boot kernel */ kernel(); /* does not return */ diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c index ae7ccbb4e9..09a5a5183b 100644 --- a/board/a4m072/a4m072.c +++ b/board/a4m072/a4m072.c @@ -270,8 +270,6 @@ static u8 display_buf[DISPLAY_BUF_SIZE]; static u8 display_putc_pos; static u8 display_out_pos; -static u8 display_dot_enable; - void display_set(int cmd) { if (cmd & DISPLAY_CLEAR) { @@ -281,12 +279,6 @@ void display_set(int cmd) { if (cmd & DISPLAY_HOME) { display_putc_pos = 0; } - - if (cmd & DISPLAY_MARK) { - display_dot_enable = 1; - } else { - display_dot_enable = 0; - } } #define SEG_A (1<<0) @@ -314,10 +306,12 @@ void display_set(int cmd) { * A..Z index 10..35 * - index 36 * _ index 37 + * . index 38 */ #define SYMBOL_DASH (36) #define SYMBOL_UNDERLINE (37) +#define SYMBOL_DOT (38) static u8 display_char2seg7_tbl[]= { @@ -337,28 +331,29 @@ static u8 display_char2seg7_tbl[]= SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */ SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */ SEG_A | SEG_E | SEG_F | SEG_G, /* F */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* g */ + 0, /* g - not displayed */ SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */ - SEG_E | SEG_F, /* I */ - SEG_B | SEG_C | SEG_D | SEG_E, /* J */ - SEG_A, /* K - special 1 */ + SEG_B | SEG_C, /* I */ + 0, /* J - not displayed */ + 0, /* K - not displayed */ SEG_D | SEG_E | SEG_F, /* L */ - SEG_B, /* m - special 2 */ - SEG_C | SEG_E | SEG_G, /* n */ - SEG_C | SEG_D | SEG_E | SEG_G, /* o */ + 0, /* m - not displayed */ + 0, /* n - not displayed */ + SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* O */ SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */ - SEG_A | SEG_B | SEG_C | SEG_F | SEG_G, /* q */ - SEG_E | SEG_G, /* r */ + 0, /* q - not displayed */ + 0, /* r - not displayed */ SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */ SEG_D | SEG_E | SEG_F | SEG_G, /* t */ SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */ - SEG_C | SEG_D | SEG_E | SEG_F, /* V */ - SEG_C, /* w - special 3 */ - SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* X */ + 0, /* V - not displayed */ + 0, /* w - not displayed */ + 0, /* X - not displayed */ SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */ - SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* Z */ + 0, /* Z - not displayed */ SEG_G, /* - */ - SEG_D /* _ */ + SEG_D, /* _ */ + SEG_P /* . */ }; /* Convert char to the LED segments representation */ @@ -374,23 +369,20 @@ static u8 display_char2seg7(char c) c -= 'A' - 10; else if (c == '-') c = SYMBOL_DASH; - else if ((c == '_') || (c == '.')) + else if (c == '_') c = SYMBOL_UNDERLINE; + else if (c == '.') + c = SYMBOL_DOT; else c = ' '; /* display unsupported symbols as space */ if (c != ' ') val = display_char2seg7_tbl[(int)c]; - /* Handle DP LED here */ - if (display_dot_enable) { - val |= SEG_P; - } - return val; } -static inline int display_putc_nomark(char c) +int display_putc(char c) { if (display_putc_pos >= DISPLAY_BUF_SIZE) return -1; @@ -403,13 +395,6 @@ static inline int display_putc_nomark(char c) return c; } -int display_putc(char c) -{ - /* Mark the codes from the "display" command with the DP LED */ - display_set(DISPLAY_MARK); - return display_putc_nomark(c); -} - /* * Flush current symbol to the LED display hardware */ @@ -493,9 +478,8 @@ void show_boot_progress(int status) if (a4m072_status2code(status, buf) < 0) return; - display_set(0); /* Clear DP Led */ - display_putc_nomark(buf[0]); - display_putc_nomark(buf[1]); + display_putc(buf[0]); + display_putc(buf[1]); display_set(DISPLAY_HOME); display_out_pos = 0; /* reset output position */ diff --git a/board/renesas/sh7785lcr/config.mk b/board/renesas/sh7785lcr/config.mk index 1a9038c753..6853d2b28b 100644 --- a/board/renesas/sh7785lcr/config.mk +++ b/board/renesas/sh7785lcr/config.mk @@ -24,6 +24,8 @@ # sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -ifndef CONFIG_SYS_TEXT_BASE +ifdef CONFIG_SH_32BIT +CONFIG_SYS_TEXT_BASE = 0x8FF80000 +else CONFIG_SYS_TEXT_BASE = 0x0ff80000 endif diff --git a/boards.cfg b/boards.cfg index 0f3292fd39..b701737475 100644 --- a/boards.cfg +++ b/boards.cfg @@ -732,5 +732,18 @@ davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci davinci_schmoogie arm arm926ejs schmoogie davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci bf527-ad7160-eval blackfin blackfin +rsk7203 sh sh2 rsk7203 renesas - +mpr2 sh sh3 mpr2 - - +ms7720se sh sh3 ms7720se - - +MigoRsh sh4 MigoR renesas - +ms7750se sh sh4 ms7750se - - +ms7722se sh sh4 ms7722se - - +r2dplus sh sh4 r2dplus renesas - +r7780mp sh sh4 r7780mp renesas - +sh7763rdp sh sh4 sh7763rdp renesas - +sh7785lcr sh sh4 sh7785lcr renesas - +sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1 +ap325rxa sh sh4 ap325rxa renesas - +espt sh sh4 espt - - # Target ARCH CPU Board name Vendor SoC Options ############################################################################################### diff --git a/common/usb_storage.c b/common/usb_storage.c index 613c4f0f1f..1e6cd6af27 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -70,7 +70,7 @@ /* direction table -- this indicates the direction of the data * transfer for each command code -- a 1 indicates input */ -unsigned char us_direction[256/8] = { +static const unsigned char us_direction[256/8] = { 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, diff --git a/doc/README.LED_display b/doc/README.LED_display index 521746e129..19977ea7e0 100644 --- a/doc/README.LED_display +++ b/doc/README.LED_display @@ -14,7 +14,6 @@ This function should control the state of the LED display. Argument is an ORed combination of the following values: DISPLAY_CLEAR -- clear the display DISPLAY_HOME -- set the position to the beginning of display - DISPLAY_MARK -- enable mark (decimal point), if implemented int display_putc(char c); diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 798902f337..c92c7a7a49 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -85,6 +85,17 @@ static phys_addr_t __cfi_flash_bank_addr(int i) phys_addr_t cfi_flash_bank_addr(int i) __attribute__((weak, alias("__cfi_flash_bank_addr"))); +static unsigned long __cfi_flash_bank_size(int i) +{ +#ifdef CONFIG_SYS_FLASH_BANKS_SIZES + return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; +#else + return 0; +#endif +} +unsigned long cfi_flash_bank_size(int i) + __attribute__((weak, alias("__cfi_flash_bank_size"))); + static void __flash_write8(u8 value, void *addr) { __raw_writeb(value, addr); @@ -1826,7 +1837,7 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) * The following code cannot be run from FLASH! * */ -ulong flash_get_size (phys_addr_t base, int banknum) +ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size) { flash_info_t *info = &flash_info[banknum]; int i, j; @@ -1915,6 +1926,13 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("size_ratio %d port %d bits chip %d bits\n", size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); + info->size = 1 << qry.dev_size; + /* multiply the size by the number of chips */ + info->size *= size_ratio; + if (max_size && (info->size > max_size)) { + debug("[truncated from %ldMiB]", info->size >> 20); + info->size = max_size; + } debug ("found %d erase regions\n", num_erase_regions); sect_cnt = 0; sector = base; @@ -1935,6 +1953,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("erase_region_count = %d erase_region_size = %d\n", erase_region_count, erase_region_size); for (j = 0; j < erase_region_count; j++) { + if (sector - base >= info->size) + break; if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { printf("ERROR: too many flash sectors\n"); break; @@ -1968,9 +1988,6 @@ ulong flash_get_size (phys_addr_t base, int banknum) } info->sector_count = sect_cnt; - info->size = 1 << qry.dev_size; - /* multiply the size by the number of chips */ - info->size *= size_ratio; info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size); tmp = 1 << qry.block_erase_timeout_typ; info->erase_blk_tout = tmp * @@ -2026,7 +2043,8 @@ unsigned long flash_init (void) flash_info[i].flash_id = FLASH_UNKNOWN; if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) - flash_get_size(cfi_flash_bank_addr(i), i); + flash_get_size(cfi_flash_bank_addr(i), i, + cfi_flash_bank_size(i)); size += flash_info[i].size; if (flash_info[i].flash_id == FLASH_UNKNOWN) { #ifndef CONFIG_SYS_FLASH_QUIET_TEST diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f44fc4e3c4..982f96e8b8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -205,12 +205,12 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) uint32_t result; do { result = ehci_readl(ptr); + udelay(5); if (result == ~(uint32_t)0) return -1; result &= mask; if (result == done) return 0; - udelay(1); usec--; } while (usec > 0); return -1; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 047902a0c1..cff3438929 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -53,6 +53,10 @@ int ehci_hcd_init(void) hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + return 0; } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index d3aa55b4a6..945ab64f95 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -175,7 +175,7 @@ struct qTD { uint32_t qt_buffer_hi[5]; /* Appendix B */ /* pad struct for 32 byte alignment */ uint32_t unused[3]; -} __attribute__ ((aligned (32))); +}; /* Queue Head (QH). */ struct QH { diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6fe2c39bce..545ebf4b50 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -76,7 +76,7 @@ void musb_start(void) * epinfo - Pointer to EP configuration table * cnt - Number of entries in the EP conf table. */ -void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt) +void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt) { u16 csr; u16 fifoaddr = 64; /* First 64 bytes of FIFO reserved for EP0 */ diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 8f73876f80..a8adcce00f 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -357,7 +357,7 @@ extern struct musb_regs *musbr; /* exported functions */ extern void musb_start(void); -extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt); +extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt); extern void write_fifo(u8 ep, u32 length, void *fifo_data); extern void read_fifo(u8 ep, u32 length, void *fifo_data); diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index f38b279096..8b0c61d642 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -29,7 +29,7 @@ #define USB_MSC_BBB_GET_MAX_LUN 0xFE /* Endpoint configuration information */ -static struct musb_epinfo epinfo[3] = { +static const struct musb_epinfo epinfo[3] = { {MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */ {MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */ {MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */ @@ -41,7 +41,7 @@ static int rh_devnum; static u32 port_status; /* Device descriptor */ -static u8 root_hub_dev_des[] = { +static const u8 root_hub_dev_des[] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, /* __u16 bcdUSB; v1.1 */ @@ -63,7 +63,7 @@ static u8 root_hub_dev_des[] = { }; /* Configuration descriptor */ -static u8 root_hub_config_des[] = { +static const u8 root_hub_config_des[] = { 0x09, /* __u8 bLength; */ 0x02, /* __u8 bDescriptorType; Configuration */ 0x19, /* __u16 wTotalLength; */ @@ -96,14 +96,14 @@ static u8 root_hub_config_des[] = { 0xff /* __u8 ep_bInterval; 255 ms */ }; -static unsigned char root_hub_str_index0[] = { +static const unsigned char root_hub_str_index0[] = { 0x04, /* __u8 bLength; */ 0x03, /* __u8 bDescriptorType; String-descriptor */ 0x09, /* __u8 lang ID */ 0x04, /* __u8 lang ID */ }; -static unsigned char root_hub_str_index1[] = { +static const unsigned char root_hub_str_index1[] = { 0x1c, /* __u8 bLength; */ 0x03, /* __u8 bDescriptorType; String-descriptor */ 'M', /* __u8 Unicode */ @@ -557,7 +557,7 @@ static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe, int len = 0; int stat = 0; u32 datab[4]; - u8 *data_buf = (u8 *) datab; + const u8 *data_buf = (u8 *) datab; u16 bmRType_bReq; u16 wValue; u16 wIndex; @@ -778,25 +778,27 @@ static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe, break; - case RH_GET_DESCRIPTOR | RH_CLASS: + case RH_GET_DESCRIPTOR | RH_CLASS: { + u8 *_data_buf = (u8 *) datab; debug("RH_GET_DESCRIPTOR | RH_CLASS\n"); - data_buf[0] = 0x09; /* min length; */ - data_buf[1] = 0x29; - data_buf[2] = 0x1; /* 1 port */ - data_buf[3] = 0x01; /* per-port power switching */ - data_buf[3] |= 0x10; /* no overcurrent reporting */ + _data_buf[0] = 0x09; /* min length; */ + _data_buf[1] = 0x29; + _data_buf[2] = 0x1; /* 1 port */ + _data_buf[3] = 0x01; /* per-port power switching */ + _data_buf[3] |= 0x10; /* no overcurrent reporting */ /* Corresponds to data_buf[4-7] */ - data_buf[4] = 0; - data_buf[5] = 5; - data_buf[6] = 0; - data_buf[7] = 0x02; - data_buf[8] = 0xff; + _data_buf[4] = 0; + _data_buf[5] = 5; + _data_buf[6] = 0; + _data_buf[7] = 0x02; + _data_buf[8] = 0xff; len = min_t(unsigned int, leni, min_t(unsigned int, data_buf[0], wLength)); break; + } case RH_GET_CONFIGURATION: debug("RH_GET_CONFIGURATION\n"); diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 24a04ebefb..f18bc45c4d 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -147,27 +147,43 @@ #define CONFIG_PREBOOT "run try_update" #define CONFIG_EXTRA_ENV_SETTINGS \ - "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ - "cf1=diskboot 200000 0:1\0" \ - "bootcmd_cf1=run bcf1\0" \ - "bcf=setenv bootargs root=/dev/hda3\0" \ - "bootcmd_nfs=run bnfs\0" \ - "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \ - "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \ - "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \ - "env_addr=FE060000\0" \ - "kernel_addr=FE100000\0" \ - "rootfs_addr=FE200000\0" \ - "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ - "bcf1=run cf1; run bcf; run addip; run bk\0" \ - "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \ - "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \ - "hostname=CPUP0\0" \ - "ethaddr=00:00:00:00:00:00\0" \ - "netdev=eth0\0" \ - "bootcmd=run bootcmd_nor\0" \ + "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ + "cf1=diskboot 200000 0:1\0" \ + "bootcmd_cf1=run bcf1\0" \ + "bcf=setenv bootargs root=/dev/hda3\0" \ + "bootcmd_nfs=run bnfs\0" \ + "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\ + "panic=1\0" \ + "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \ + "run norargs addip; run bk\0" \ + "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \ + "run nfsargs addip ; run bk\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "try_update=usb start;sleep 2;usb start;sleep 1;" \ + "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \ + "source 2F0000\0" \ + "env_addr=FE060000\0" \ + "kernel_addr=FE100000\0" \ + "rootfs_addr=FE200000\0" \ + "add_mtd=setenv bootargs ${bootargs} mtdparts=" \ + "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ + "bcf1=run cf1; run bcf; run addip; run bk\0" \ + "add_consolespec=setenv bootargs ${bootargs} " \ + "console=/dev/null quiet\0" \ + "addip=if test -n ${ethaddr};" \ + "then if test -n ${ipaddr};" \ + "then setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:"\ + "${netmask}:${hostname}:${netdev}:off;" \ + "fi;" \ + "else;" \ + "setenv bootargs ${bootargs} no_ethaddr;" \ + "fi\0" \ + "hostname=CPUP0\0" \ + "ethaddr=00:00:00:00:00:00\0" \ + "netdev=eth0\0" \ + "bootcmd=run bootcmd_nor\0" \ "" /* * IPB Bus clocking configuration. @@ -212,6 +228,7 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} +#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE} /* * Environment settings diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 2c18e2f7fd..6627f99ce3 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -62,8 +62,10 @@ /* MEMORY */ #if defined(CONFIG_SH_32BIT) -#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000) -#define SH7785LCR_SDRAM_BASE (0x88000000) +/* 0x40000000 - 0x47FFFFFF does not use */ +#define CONFIG_SH_SDRAM_OFFSET (0x8000000) +#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET) +#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET) #define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) #define SH7785LCR_FLASH_BASE_1 (0xa0000000) #define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) diff --git a/include/led-display.h b/include/led-display.h index 41c3744345..eaa0f40640 100644 --- a/include/led-display.h +++ b/include/led-display.h @@ -29,7 +29,6 @@ /* Display Commands */ #define DISPLAY_CLEAR 0x1 /* Clear the display */ #define DISPLAY_HOME 0x2 /* Set cursor at home position */ -#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */ void display_set(int cmd); int display_putc(char c); |