diff options
| -rw-r--r-- | board/BuS/EB+MCF-EV123/EB+MCF-EV123.c | 104 | ||||
| -rw-r--r-- | board/BuS/EB+MCF-EV123/Makefile | 2 | ||||
| -rw-r--r-- | board/BuS/EB+MCF-EV123/VCxK.c | 136 | ||||
| -rw-r--r-- | board/BuS/EB+MCF-EV123/VCxK.h | 48 | ||||
| -rw-r--r-- | include/configs/EB+MCF-EV123.h | 176 |
5 files changed, 186 insertions, 280 deletions
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index 73dfb3d52b..2fc3eafbd8 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2009 * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> * * (C) Copyright 2000-2003 @@ -27,7 +27,18 @@ #include <common.h> #include <command.h> #include "asm/m5282.h" -#include "VCxK.h" +#include <bmp_layout.h> +#include <status_led.h> +#include <bus_vcxk.h> + +/*---------------------------------------------------------------------------*/ + +DECLARE_GLOBAL_DATA_PTR; + +unsigned long display_width; +unsigned long display_height; + +/*---------------------------------------------------------------------------*/ int checkboard (void) { @@ -89,7 +100,6 @@ phys_size_t initdram (int board_type) return size; } - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { @@ -126,37 +136,99 @@ int testdram (void) int misc_init_r(void) { - init_vcxk(); +#ifdef CONFIG_HW_WATCHDOG + hw_watchdog_init(); +#endif +#ifndef CONFIG_VIDEO + vcxk_init(16, 16); +#endif return 1; } +#if defined(CONFIG_VIDEO) + +/* + ****h* EB+CPU5282-T1/drv_video_init + * FUNCTION + *** + */ + +int drv_video_init(void) +{ + char *s; + unsigned long splash; + + printf("Init Video as "); + + if ((s = getenv("displaywidth")) != NULL) + display_width = simple_strtoul(s, NULL, 10); + else + display_width = 256; + + if ((s = getenv("displayheight")) != NULL) + display_height = simple_strtoul(s, NULL, 10); + else + display_height = 256; + + printf("%lu x %lu pixel matrix\n", display_width, display_height); + + MCFCCM_CCR &= ~MCFCCM_CCR_SZEN; + MCFGPIO_PEPAR &= ~MCFGPIO_PEPAR_PEPA2; + + vcxk_init(display_width, display_height); + +#ifdef CONFIG_SPLASH_SCREEN + if ((s = getenv("splashimage")) != NULL) { + debug("use splashimage: %s\n", s); + splash = simple_strtoul(s, NULL, 16); + debug("use splashimage: %x\n", splash); + vcxk_acknowledge_wait(); + video_display_bitmap(splash, 0, 0); + } +#endif + return 0; +} +#endif + /*---------------------------------------------------------------------------*/ -int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +#ifdef CONFIG_VIDEO +int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int rcode = 0; - ulong source; + ulong side; + ulong bright; switch (argc) { - case 2: - source = simple_strtoul(argv[1],NULL,16); - vcxk_loadimage(source); - rcode = 0; + case 3: + side = simple_strtoul(argv[1], NULL, 10); + bright = simple_strtoul(argv[2], NULL, 10); + if ((side >= 0) && (side <= 3) && + (bright >= 0) && (bright <= 1000)) { + vcxk_setbrightness(side, bright); + rcode = 0; + } else { + printf("parameters out of range\n"); + printf("Usage:\n%s\n", cmdtp->usage); + rcode = 1; + } break; default: - cmd_usage(cmdtp); + printf("Usage:\n%s\n", cmdtp->usage); rcode = 1; break; } return rcode; } -/***************************************************/ +/*---------------------------------------------------------------------------*/ U_BOOT_CMD( - vcimage, 2, 0, do_vcimage, - "loads an image to Display", - "vcimage addr" + bright, 3, 0, do_brightness, + "sets the display brightness\n", + " <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n" ); -/* EOF EB+MCF-EV123c */ +#endif + +/* EOF EB+MCF-EV123.c */ diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile index ed3ac07558..44961b97d1 100644 --- a/board/BuS/EB+MCF-EV123/Makefile +++ b/board/BuS/EB+MCF-EV123/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o +COBJS = $(BOARD).o cfm_flash.o flash.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c deleted file mode 100644 index f2fe353dbe..0000000000 --- a/board/BuS/EB+MCF-EV123/VCxK.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * (C) Copyright 2005 - * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/m5282.h> -#include "VCxK.h" - -vu_char *vcxk_bws = (vu_char *)(CONFIG_SYS_CS3_BASE); -#define VCXK_BWS vcxk_bws - -static ulong vcxk_driver; - - -ulong search_vcxk_driver(void); -void vcxk_cls(void); -void vcxk_setbrightness(short brightness); -int vcxk_request(void); -int vcxk_acknowledge_wait(void); -void vcxk_clear(void); - -int init_vcxk(void) -{ - VIDEO_Invert_CFG &= ~VIDEO_Invert_IO; - VIDEO_INVERT_PORT |= VIDEO_INVERT_PIN; - VIDEO_INVERT_DDR |= VIDEO_INVERT_PIN; - - VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN; - VIDEO_REQUEST_DDR |= VIDEO_REQUEST_PIN; - - VIDEO_ACKNOWLEDGE_DDR &= ~VIDEO_ACKNOWLEDGE_PIN; - - vcxk_driver = search_vcxk_driver(); - if (vcxk_driver) - { - /* use flash resist driver */ - } - else - { - vcxk_cls(); - vcxk_cls(); - vcxk_setbrightness(1000); - } - VIDEO_ENABLE_DDR |= VIDEO_ENABLE_PIN; - VIDEO_ENABLE_PORT |= VIDEO_ENABLE_PIN; - VIDEO_ENABLE_PORT &= ~VIDEO_ENABLE_PIN; - return 1; -} - -void vcxk_loadimage(ulong source) -{ - int cnt; - vcxk_acknowledge_wait(); - for (cnt=0; cnt<16384; cnt++) - { - VCXK_BWS[cnt*2] = (*(vu_char*) source); - source++; - } - vcxk_request(); -} - -void vcxk_cls(void) -{ - vcxk_acknowledge_wait(); - vcxk_clear(); - vcxk_request(); -} - -void vcxk_clear(void) -{ - int cnt; - for (cnt=0; cnt<16384; cnt++) - { - VCXK_BWS[cnt*2] = 0x00; - } -} - -void vcxk_setbrightness(short brightness) -{ - VCXK_BWS[0x8000]=(brightness >> 4) +2; - VCXK_BWS[0xC000]= (brightness + 23) >> 8; - VCXK_BWS[0xC001]= (brightness + 23) & 0xFF; -} - -int vcxk_request(void) -{ - if (vcxk_driver) - { - /* use flash resist driver */ - } - else - { - VIDEO_REQUEST_PORT &= ~VIDEO_REQUEST_PIN; - VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN; - } - return 1; -} - -int vcxk_acknowledge_wait(void) -{ - if (vcxk_driver) - { - /* use flash resist driver */ - } - else - { - while (!(VIDEO_ACKNOWLEDGE_PORT & VIDEO_ACKNOWLEDGE_PIN)); - } - return 1; -} - -ulong search_vcxk_driver(void) -{ - return 0; -} - -/* eof */ diff --git a/board/BuS/EB+MCF-EV123/VCxK.h b/board/BuS/EB+MCF-EV123/VCxK.h deleted file mode 100644 index f591e5c52f..0000000000 --- a/board/BuS/EB+MCF-EV123/VCxK.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2005 - * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __VCXK_H_ -#define __VCXK_H_ - -extern int init_vcxk(void); -void vcxk_loadimage(ulong source); - -#define VIDEO_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT -#define VIDEO_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR -#define VIDEO_ACKNOWLEDGE_PIN 0x0001 - -#define VIDEO_ENABLE_PORT MCFGPTB_GPTPORT -#define VIDEO_ENABLE_DDR MCFGPTB_GPTDDR -#define VIDEO_ENABLE_PIN 0x0002 - -#define VIDEO_REQUEST_PORT MCFGPTB_GPTPORT -#define VIDEO_REQUEST_DDR MCFGPTB_GPTDDR -#define VIDEO_REQUEST_PIN 0x0004 - -#define VIDEO_Invert_CFG MCFGPIO_PEPAR -#define VIDEO_Invert_IO MCFGPIO_PEPAR_PEPA2 -#define VIDEO_INVERT_PORT MCFGPIO_PORTE -#define VIDEO_INVERT_DDR MCFGPIO_DDRE -#define VIDEO_INVERT_PIN MCFGPIO_PORT2 - -#endif diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index a13db7c229..a0b27a89c4 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -1,7 +1,7 @@ /* * Configuation settings for the BuS EB+MCF-EV123 boards. * - * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> + * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> * * See file CREDITS for list of people who contributed to this * project. @@ -25,16 +25,15 @@ #ifndef _CONFIG_EB_MCF_EV123_H_ #define _CONFIG_EB_MCF_EV123_H_ -#define CONFIG_EB_MCF_EV123 - #undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP -/* - * High Level Configuration Options (easy to change) - */ +/*----------------------------------------------------------------------* + * High Level Configuration Options (easy to change) * + *----------------------------------------------------------------------*/ #define CONFIG_MCF52x2 /* define processor family */ #define CONFIG_M5282 /* define processor type */ +#define CONFIG_EB_MCF_EV123 #define CONFIG_MISC_INIT_R @@ -43,29 +42,33 @@ #define CONFIG_BAUDRATE 9600 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ #define CONFIG_BOOTCOMMAND "printenv" -/* Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash - */ +/*----------------------------------------------------------------------* + * Options * + *----------------------------------------------------------------------*/ + +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_RESET_TO_RETRY +#define CONFIG_SPLASH_SCREEN + +/*----------------------------------------------------------------------* + * Configuration for environment * + * Environment is in the second sector of the first 256k of flash * + *----------------------------------------------------------------------*/ + #ifndef CONFIG_MONITOR_IS_IN_RAM #define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */ #define CONFIG_ENV_SECT_SIZE 0x4000 #define CONFIG_ENV_IS_IN_FLASH 1 -/* -#define CONFIG_ENV_IS_EMBEDDED 1 -#define CONFIG_ENV_ADDR_REDUND 0xF0018000 -#define CONFIG_ENV_SECT_SIZE_REDUND 0x4000 -*/ #else #define CONFIG_ENV_ADDR 0xFFE04000 #define CONFIG_ENV_SECT_SIZE 0x2000 #define CONFIG_ENV_IS_IN_FLASH 1 #endif - /* * BOOTP options */ @@ -74,7 +77,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -86,50 +88,20 @@ #define CONFIG_MCFTMR -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -# define CONFIG_NET_MULTI 1 -# define CONFIG_MII 1 -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC0_PINMUX 0 -# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -#ifdef CONFIG_MCFFEC -# define CONFIG_ETHADDR 00:CF:52:82:EB:01 -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -# define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif /* CONFIG_MCFFEC */ #define CONFIG_BOOTDELAY 5 -#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_HUSH_PARSER +#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> " +#define CONFIG_SYS_LONGHELP 1 #if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LOAD_ADDR 0x20000 @@ -138,29 +110,53 @@ /*#define CONFIG_SYS_DRAM_TEST 1 */ #undef CONFIG_SYS_DRAM_TEST -/* Clock and PLL Configuration */ +/*----------------------------------------------------------------------* + * Clock and PLL Configuration * + *----------------------------------------------------------------------*/ #define CONFIG_SYS_HZ 10000000 #define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */ /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ -#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */ -#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ -/* +/*----------------------------------------------------------------------* + * Network * + *----------------------------------------------------------------------*/ + +#define CONFIG_MCFFEC +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1 +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_SYS_RX_ETH_BUFFER 8 +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN + +#define CONFIG_SYS_FEC0_PINMUX 0 +#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +#define MCFFEC_TOUT_LOOP 50000 + +#define CONFIG_ETHADDR 00:CF:52:82:EB:01 +#define CONFIG_OVERWRITE_ETHADDR_ONCE + +/*------------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. - */ -#define CONFIG_SYS_MBAR 0x40000000 + *-----------------------------------------------------------------------*/ + +#define CONFIG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + *-----------------------------------------------------------------------*/ + +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_GBL_DATA_SIZE 64 +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -169,18 +165,11 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE1 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */ - -/* -#define CONFIG_SYS_SDRAM_BASE0 CONFIG_SYS_SDRAM_BASE1+CONFIG_SYS_SDRAM_SIZE1*1024*1024 -#define CONFIG_SYS_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1 #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ @@ -199,11 +188,16 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ + +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 +#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 + #define CONFIG_SYS_MAX_FLASH_SECT 35 #define CONFIG_SYS_MAX_FLASH_BANKS 2 #define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 @@ -246,16 +240,40 @@ #define CONFIG_SYS_PCDAT 0x0000000 #define CONFIG_SYS_PEHLPAR 0xC0 -#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CONFIG_SYS_PUAPAR 0x0F #define CONFIG_SYS_DDRUA 0x05 #define CONFIG_SYS_PJPAR 0xFF /*----------------------------------------------------------------------- - * CCM configuration + * VIDEO configuration */ -#define CONFIG_SYS_CCM_SIZ 0 +#define CONFIG_VIDEO -/*---------------------------------------------------------------------*/ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_VCXK 1 + +#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2 +#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1 +#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE +#define CONFIG_SYS_VCXK_AUTODETECT 1 + +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001 + +#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002 + +#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004 + +#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE +#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE +#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2 + +#endif /* CONFIG_VIDEO */ #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/ |