diff options
| -rw-r--r-- | arch/mips/dts/mscc,serval.dtsi | 58 | ||||
| -rw-r--r-- | arch/mips/dts/serval_pcb105.dts | 44 | ||||
| -rw-r--r-- | arch/mips/dts/serval_pcb106.dts | 44 | ||||
| -rw-r--r-- | include/dt-bindings/mscc/serval_data.h | 19 |
4 files changed, 165 insertions, 0 deletions
diff --git a/arch/mips/dts/mscc,serval.dtsi b/arch/mips/dts/mscc,serval.dtsi index bd60051719..90eeebd3a4 100644 --- a/arch/mips/dts/mscc,serval.dtsi +++ b/arch/mips/dts/mscc,serval.dtsi @@ -145,5 +145,63 @@ #gpio-cells = <2>; gpio-ranges = <&sgpio 0 0 64>; }; + + switch: switch@011e0000 { + compatible = "mscc,vsc7418-switch"; + reg = <0x011e0000 0x0100>, // VTSS_TO_DEV0 + <0x011f0000 0x0100>, // VTSS_TO_DEV1 + <0x01200000 0x0100>, // VTSS_TO_DEV2 + <0x01210000 0x0100>, // VTSS_TO_DEV3 + <0x01220000 0x0100>, // VTSS_TO_DEV4 + <0x01230000 0x0100>, // VTSS_TO_DEV5 + <0x01240000 0x0100>, // VTSS_TO_DEV6 + <0x01250000 0x0100>, // VTSS_TO_DEV7 + <0x01260000 0x0100>, // VTSS_TO_DEV8 + <0x01270000 0x0100>, // VTSS_TO_DEV9 + <0x01280000 0x0100>, // VTSS_TO_DEV10 + <0x01900000 0x100000>, // ANA + <0x01080000 0x20000>, // QS + <0x01800000 0x100000>, // QSYS + <0x01030000 0x10000>, // REW + <0x01010000 0x20000>, // SYS + <0x010a0000 0x10000>; // HSIO + reg-names = "port0", "port1", "port2", "port3", + "port4", "port5", "port6", "port7", + "port8", "port9", "port10", + "ana", "qs", "qsys", "rew", "sys", + "hsio"; + status = "okay"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio0: mdio@0107005c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,serval-miim"; + reg = <0x0107005c 0x24>; + status = "disabled"; + }; + + mdio1: mdio@01070080 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,serval-miim"; + reg = <0x01070080 0x24>; + status = "disabled"; + }; + + hsio: syscon@10d0000 { + compatible = "mscc,serval-hsio", "syscon", "simple-mfd"; + reg = <0x10a0000 0x10000>; + + serdes_hsio: serdes_hsio { + compatible = "mscc,vsc7418-serdes"; + #phy-cells = <3>; + }; + }; }; }; diff --git a/arch/mips/dts/serval_pcb105.dts b/arch/mips/dts/serval_pcb105.dts index 1598669447..667277080f 100644 --- a/arch/mips/dts/serval_pcb105.dts +++ b/arch/mips/dts/serval_pcb105.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mscc,serval.dtsi" +#include <dt-bindings/mscc/serval_data.h> / { model = "Serval PCB105 Reference Board"; @@ -54,3 +55,46 @@ status = "okay"; sgpio-ports = <0x00FFFFFF>; }; + +&mdio1 { + status = "okay"; + + phy16: ethernet-phy@16 { + reg = <16>; + }; + phy17: ethernet-phy@17 { + reg = <17>; + }; + phy18: ethernet-phy@18 { + reg = <18>; + }; + phy19: ethernet-phy@19 { + reg = <19>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <7>; + phy-handle = <&phy16>; + phys = <&serdes_hsio 7 SERDES1G(7) PHY_MODE_SGMII>; + }; + port1: port@1 { + reg = <6>; + phy-handle = <&phy17>; + phys = <&serdes_hsio 6 SERDES1G(6) PHY_MODE_SGMII>; + }; + port2: port@2 { + reg = <5>; + phy-handle = <&phy18>; + phys = <&serdes_hsio 5 SERDES1G(5) PHY_MODE_SGMII>; + }; + port3: port@3 { + reg = <4>; + phy-handle = <&phy19>; + phys = <&serdes_hsio 4 SERDES1G(4) PHY_MODE_SGMII>; + }; + }; +}; diff --git a/arch/mips/dts/serval_pcb106.dts b/arch/mips/dts/serval_pcb106.dts index fb3524bb31..e77c357868 100644 --- a/arch/mips/dts/serval_pcb106.dts +++ b/arch/mips/dts/serval_pcb106.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mscc,serval.dtsi" +#include <dt-bindings/mscc/serval_data.h> / { model = "Serval PCB106 Reference Board"; @@ -54,3 +55,46 @@ status = "okay"; sgpio-ports = <0x00FFFFFF>; }; + +&mdio1 { + status = "okay"; + + phy16: ethernet-phy@16 { + reg = <16>; + }; + phy17: ethernet-phy@17 { + reg = <17>; + }; + phy18: ethernet-phy@18 { + reg = <18>; + }; + phy19: ethernet-phy@19 { + reg = <19>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <7>; + phy-handle = <&phy16>; + phys = <&serdes_hsio 7 SERDES1G(7) PHY_MODE_SGMII>; + }; + port1: port@1 { + reg = <6>; + phy-handle = <&phy17>; + phys = <&serdes_hsio 6 SERDES1G(6) PHY_MODE_SGMII>; + }; + port2: port@2 { + reg = <5>; + phy-handle = <&phy18>; + phys = <&serdes_hsio 5 SERDES1G(5) PHY_MODE_SGMII>; + }; + port3: port@3 { + reg = <4>; + phy-handle = <&phy19>; + phys = <&serdes_hsio 4 SERDES1G(4) PHY_MODE_SGMII>; + }; + }; +}; diff --git a/include/dt-bindings/mscc/serval_data.h b/include/dt-bindings/mscc/serval_data.h new file mode 100644 index 0000000000..b374fda05e --- /dev/null +++ b/include/dt-bindings/mscc/serval_data.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef _SERVAL_DATA_H_ +#define _SERVAL_DATA_H_ + +#define SERDES1G(x) (x) +#define SERDES1G_MAX SERDES1G(9) +#define SERDES6G(x) (SERDES1G_MAX + 1 + (x)) +#define SERDES6G_MAX SERDES6G(11) +#define SERDES_MAX (SERDES6G_MAX + 1) + +/* similar with phy_interface_t */ +#define PHY_MODE_SGMII 2 +#define PHY_MODE_QSGMII 4 + +#endif |