diff options
158 files changed, 10246 insertions, 666 deletions
@@ -251,6 +251,16 @@ config FIT if FIT +config FIT_EXTERNAL_OFFSET + hex "Text Base" + default 0x0 + help + This specifies a data offset in fit image. + The offset is from data payload offset to the beginning of + fit image header. When specifies a offset, specific data + could be put in the hole between data payload and fit image + header, such as CSF data on i.MX platform. + config FIT_ENABLE_SHA256_SUPPORT bool "Support SHA256 checksum of FIT image contents" default y @@ -893,7 +893,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT)) quiet_cmd_mkfitimage = MKIMAGE $@ -cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \ +cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ -p $(CONFIG_FIT_EXTERNAL_OFFSET)\ >$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT)) quiet_cmd_cat = CAT $@ @@ -954,6 +954,27 @@ ifeq ($(CONFIG_OF_EMBED),y) @echo >&2 "See doc/README.fdt-control for more info." @echo >&2 "====================================================" endif +ifeq ($(CONFIG_SPI),y) +ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy) + @echo >&2 "===================== WARNING ======================" + @echo >&2 "This board does not use CONFIG_DM_SPI. Please update" + @echo >&2 "the board before v2019.04 for no dm conversion" + @echo >&2 "and v2019.07 for partially dm converted drivers." + @echo >&2 "Failure to update can lead to driver/board removal" + @echo >&2 "See doc/driver-model/MIGRATION.txt for more info." + @echo >&2 "====================================================" +endif +endif +ifeq ($(CONFIG_SPI_FLASH),y) +ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy) + @echo >&2 "===================== WARNING ======================" + @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update" + @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release." + @echo >&2 "Failure to update by the deadline may result in board removal." + @echo >&2 "See doc/driver-model/MIGRATION.txt for more info." + @echo >&2 "====================================================" +endif +endif @# Check that this build does not use CONFIG options that we do not @# know about unless they are in Kconfig. All the existing CONFIG @# options are whitelisted, so new ones should not be added. @@ -1207,6 +1228,11 @@ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE SPL: spl/u-boot-spl.bin FORCE $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ +ifeq ($(CONFIG_ARCH_IMX8M), y) +flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE + $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ +endif + u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cb7ec58079..b5952ad4cc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -694,7 +694,7 @@ config ARCH_IMX8 select DM select OF_CONTROL -config ARCH_MX8M +config ARCH_IMX8M bool "NXP i.MX8M platform" select ARM64 select DM @@ -1451,7 +1451,7 @@ source "arch/arm/mach-imx/mx7ulp/Kconfig" source "arch/arm/mach-imx/imx8/Kconfig" -source "arch/arm/mach-imx/mx8m/Kconfig" +source "arch/arm/mach-imx/imx8m/Kconfig" source "arch/arm/mach-imx/mxs/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c38ef3cb69..87d9d4b9f7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -103,11 +103,11 @@ libs-y += arch/arm/cpu/ libs-y += arch/arm/lib/ ifeq ($(CONFIG_SPL_BUILD),y) -ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 mx8m)) +ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m)) libs-y += arch/arm/mach-imx/ endif else -ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx7ulp mx31 mx35 mxs mx8m imx8 vf610)) +ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx7ulp mx31 mx35 mxs imx8m imx8 vf610)) libs-y += arch/arm/mach-imx/ endif endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 index a6ef830069..9583bf743e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 @@ -8,3 +8,14 @@ Freescale LayerScape with Chassis Generation 2 This architecture supports Freescale ARMv8 SoCs with Chassis generation 2, for example LS1043A. + +Watchdog support Overview +------------------- +Support watchdog driver for LSCH2. The driver is disabled in default. +You can enable it by setting CONFIG_IMX_WATCHDOG. +Use following config to set watchdog timeout, if this config is not defined, +the default timeout value is 128s which is the maximum. Set 10 seconds for +example: + #define CONFIG_WATCHDOG_TIMEOUT_MSECS 10000 +Set CONFIG_WATCHDOG_RESET_DISABLE to disable reset watchdog, so that the +watchdog will not be fed in u-boot. diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index dc6f6b233a..dda4e59491 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -466,6 +466,8 @@ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb dtb-$(CONFIG_ARCH_IMX8) += fsl-imx8qxp-mek.dtb +dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb + dtb-$(CONFIG_RCAR_GEN3) += \ r8a7795-h3ulcb-u-boot.dtb \ r8a7795-salvator-x-u-boot.dtb \ diff --git a/arch/arm/dts/fsl-imx8mq-evk.dts b/arch/arm/dts/fsl-imx8mq-evk.dts new file mode 100644 index 0000000000..4a08099b3c --- /dev/null +++ b/arch/arm/dts/fsl-imx8mq-evk.dts @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +/dts-v1/; + +/* First 128KB is for PSCI ATF. */ +/memreserve/ 0x40000000 0x00020000; + +#include "fsl-imx8mq.dtsi" + +/ { + model = "Freescale i.MX8MQ EVK"; + compatible = "fsl,imx8mq-evk", "fsl,imx8mq"; + + chosen { + bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usdhc2_vmmc: usdhc2_vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + ledpwm2 { + label = "PWM2"; + pwms = <&pwm2 0 50000>; + max-brightness = <255>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx8mq-evk { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x16 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + at803x,led-act-blind-workaround; + at803x,eee-disabled; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&lcdif { + status = "okay"; + disp-dev = "mipi_dsi_northwest"; + display = <&display0>; + + display0: display@0 { + bits-per-pixel = <24>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: n25q256a@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + spi-nor,ddr-quad-read-dummy = <6>; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 9a61fbb453..8304f67192 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -172,10 +172,7 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; - - /* for rockchip boot on */ - rockchip,pwm_id= <2>; - rockchip,pwm_voltage = <1000000>; + regulator-init-microvolt = <950000>; }; }; diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi index d63b56e944..31ba52b14e 100644 --- a/arch/arm/dts/uniphier-ld11.dtsi +++ b/arch/arm/dts/uniphier-ld11.dtsi @@ -116,6 +116,28 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -432,6 +454,8 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + phy-names = "usb"; + phys = <&usb_phy0>; has-transaction-translator; }; @@ -446,6 +470,8 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + phy-names = "usb"; + phys = <&usb_phy1>; has-transaction-translator; }; @@ -460,6 +486,8 @@ <&mio_clk 14>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>; + phy-names = "usb"; + phys = <&usb_phy2>; has-transaction-translator; }; @@ -488,6 +516,27 @@ pinctrl: pinctrl { compatible = "socionext,uniphier-ld11-pinctrl"; }; + + usb-phy { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; }; soc-glue@5f900000 { @@ -571,7 +620,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/uniphier-ld20-global.dts b/arch/arm/dts/uniphier-ld20-global.dts index 1a5e7c24b9..9ca692ed1b 100644 --- a/arch/arm/dts/uniphier-ld20-global.dts +++ b/arch/arm/dts/uniphier-ld20-global.dts @@ -145,6 +145,10 @@ }; }; +&usb { + status = "okay"; +}; + &nand { status = "okay"; }; diff --git a/arch/arm/dts/uniphier-ld20-ref.dts b/arch/arm/dts/uniphier-ld20-ref.dts index 440c2e6a63..406244a5c8 100644 --- a/arch/arm/dts/uniphier-ld20-ref.dts +++ b/arch/arm/dts/uniphier-ld20-ref.dts @@ -75,3 +75,7 @@ drive-strength = <9>; }; }; + +&usb { + status = "okay"; +}; diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index 9970497039..b9ed613ace 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -224,6 +224,50 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi2: spi@54006200 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006200 0x100>; + interrupts = <0 229 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi3: spi@54006300 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006300 0x100>; + interrupts = <0 230 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -567,6 +611,50 @@ efuse@200 { compatible = "socionext,uniphier-efuse"; reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* USB cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; }; }; @@ -634,6 +722,157 @@ }; }; + _usb: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 134 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>, + <&pinctrl_usb2>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; + resets = <&usb_rst 15>; + phys = <&usb_hsphy0>, <&usb_hsphy1>, + <&usb_hsphy2>, <&usb_hsphy3>, + <&usb_ssphy0>, <&usb_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus0: regulator@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus1: regulator@110 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus2: regulator@120 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x120 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_vbus3: regulator@130 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x130 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, + <&usb_hs_i0>; + }; + + usb_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, + <&usb_hs_i0>; + }; + + usb_hsphy2: hs-phy@220 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x220 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb_vbus2>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, + <&usb_hs_i2>; + }; + + usb_hsphy3: hs-phy@230 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x230 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb_vbus3>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, + <&usb_hs_i2>; + }; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + vbus-supply = <&usb_vbus0>; + }; + + usb_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 19>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 19>; + vbus-supply = <&usb_vbus1>; + }; + }; + + /* FIXME: U-Boot own node */ usb: usb@65b00000 { compatible = "socionext,uniphier-ld20-dwc3"; reg = <0x65b00000 0x1000>; @@ -660,7 +899,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi index f505f643f7..b73d594b6d 100644 --- a/arch/arm/dts/uniphier-ld4.dtsi +++ b/arch/arm/dts/uniphier-ld4.dtsi @@ -63,6 +63,17 @@ cache-level = <2>; }; + spi: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -381,7 +392,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/uniphier-pinctrl.dtsi b/arch/arm/dts/uniphier-pinctrl.dtsi index aeb47b0ffe..1fee5ffbfb 100644 --- a/arch/arm/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/dts/uniphier-pinctrl.dtsi @@ -131,6 +131,26 @@ function = "sd1"; }; + pinctrl_spi0: spi0 { + groups = "spi0"; + function = "spi0"; + }; + + pinctrl_spi1: spi1 { + groups = "spi1"; + function = "spi1"; + }; + + pinctrl_spi2: spi2 { + groups = "spi2"; + function = "spi2"; + }; + + pinctrl_spi3: spi3 { + groups = "spi3"; + function = "spi3"; + }; + pinctrl_system_bus: system-bus { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; diff --git a/arch/arm/dts/uniphier-pro4-ace.dts b/arch/arm/dts/uniphier-pro4-ace.dts index bff90c256b..ce8ea7b79b 100644 --- a/arch/arm/dts/uniphier-pro4-ace.dts +++ b/arch/arm/dts/uniphier-pro4-ace.dts @@ -73,11 +73,11 @@ status = "okay"; }; -&usb0 { +&usb2 { status = "okay"; }; -&usb1 { +&usb3 { status = "okay"; }; @@ -92,10 +92,10 @@ }; }; -&usb2 { +&usb0 { status = "okay"; }; -&usb3 { +&usb1 { status = "okay"; }; diff --git a/arch/arm/dts/uniphier-pro4-sanji.dts b/arch/arm/dts/uniphier-pro4-sanji.dts index 7f5b957f98..686dd3af7e 100644 --- a/arch/arm/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/dts/uniphier-pro4-sanji.dts @@ -68,11 +68,11 @@ status = "okay"; }; -&usb0 { +&usb2 { status = "okay"; }; -&usb1 { +&usb3 { status = "okay"; }; @@ -87,10 +87,10 @@ }; }; -&usb2 { +&usb0 { status = "okay"; }; -&usb3 { +&usb1 { status = "okay"; }; diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index 8974844541..ef342088e1 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -71,6 +71,17 @@ cache-level = <2>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -317,6 +328,8 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + phy-names = "usb"; + phys = <&usb_phy0>; has-transaction-translator; }; @@ -331,6 +344,8 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + phy-names = "usb"; + phys = <&usb_phy1>; has-transaction-translator; }; @@ -342,6 +357,34 @@ pinctrl: pinctrl { compatible = "socionext,uniphier-pro4-pinctrl"; }; + + usb-phy { + compatible = "socionext,uniphier-pro4-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + vbus-supply = <&usb0_vbus>; + }; + + usb_phy3: phy@3 { + reg = <3>; + #phy-cells = <0>; + vbus-supply = <&usb1_vbus>; + }; + }; }; soc-glue@5f900000 { @@ -434,6 +477,60 @@ }; }; + _usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 4>; + phys = <&usb_phy2>, <&usb0_ssphy>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pro4-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x100>; + + usb0_vbus: regulator@0 { + compatible = "socionext,uniphier-pro4-usb3-regulator"; + reg = <0 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_ssphy: ss-phy@10 { + compatible = "socionext,uniphier-pro4-usb3-ssphy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus>; + }; + + usb0_rst: reset@40 { + compatible = "socionext,uniphier-pro4-usb3-reset"; + reg = <0x40 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + }; + + /* FIXME: U-Boot own node */ usb0: usb@65b00000 { compatible = "socionext,uniphier-pro4-dwc3"; status = "disabled"; @@ -452,6 +549,49 @@ }; }; + _usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb1_rst 4>; + phys = <&usb_phy3>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pro4-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x100>; + + usb1_vbus: regulator@0 { + compatible = "socionext,uniphier-pro4-usb3-regulator"; + reg = <0 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_rst: reset@40 { + compatible = "socionext,uniphier-pro4-usb3-reset"; + reg = <0x40 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + }; + + /* FIXME: U-Boot own node */ usb1: usb@65d00000 { compatible = "socionext,uniphier-pro4-dwc3"; status = "disabled"; @@ -478,7 +618,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/uniphier-pro5.dtsi b/arch/arm/dts/uniphier-pro5.dtsi index 6e0ea7976e..9cad79d086 100644 --- a/arch/arm/dts/uniphier-pro5.dtsi +++ b/arch/arm/dts/uniphier-pro5.dtsi @@ -156,6 +156,28 @@ cache-level = <3>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -475,7 +497,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index 63c1c2ce60..fa25ffd97f 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -167,6 +167,28 @@ cache-level = <2>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -557,6 +579,103 @@ }; }; + _usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_hsphy1>, + <&usb0_ssphy0>, <&usb0_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pxs2-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus1>; + }; + + usb0_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + vbus-supply = <&usb0_vbus1>; + }; + }; + + /* FIXME: U-Boot own node */ usb0: usb@65b00000 { compatible = "socionext,uniphier-pxs2-dwc3"; status = "disabled"; @@ -575,6 +694,91 @@ }; }; + _usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pxs2-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 20>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus0>; + }; + + usb1_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 20>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus1>; + }; + + usb1_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 21>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 21>; + vbus-supply = <&usb1_vbus0>; + }; + }; + + /* FIXME: U-Boot own node */ usb1: usb@65d00000 { compatible = "socionext,uniphier-pxs2-dwc3"; status = "disabled"; @@ -601,7 +805,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index daf74531e4..f629c6a862 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -144,6 +144,28 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -384,6 +406,50 @@ efuse@200 { compatible = "socionext,uniphier-efuse"; reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* USB cells */ + usb_rterm0: trim@54,4 { + reg = <0x54 1>; + bits = <4 2>; + }; + usb_rterm1: trim@55,4 { + reg = <0x55 1>; + bits = <4 2>; + }; + usb_rterm2: trim@58,4 { + reg = <0x58 1>; + bits = <4 2>; + }; + usb_rterm3: trim@59,4 { + reg = <0x59 1>; + bits = <4 2>; + }; + usb_sel_t0: trim@54,0 { + reg = <0x54 1>; + bits = <0 4>; + }; + usb_sel_t1: trim@55,0 { + reg = <0x55 1>; + bits = <0 4>; + }; + usb_sel_t2: trim@58,0 { + reg = <0x58 1>; + bits = <0 4>; + }; + usb_sel_t3: trim@59,0 { + reg = <0x59 1>; + bits = <0 4>; + }; + usb_hs_i0: trim@56,0 { + reg = <0x56 1>; + bits = <0 4>; + }; + usb_hs_i2: trim@5a,0 { + reg = <0x5a 1>; + bits = <0 4>; + }; }; }; @@ -465,6 +531,109 @@ }; }; + _usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_hsphy1>, + <&usb0_ssphy0>, <&usb0_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pxs3-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pxs3-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 12>; + reset-names = "link"; + resets = <&sys_rst 12>; + }; + + usb0_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, + <&usb_hs_i0>; + }; + + usb0_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>, + <&usb_hs_i0>; + }; + + usb0_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 17>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 12>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 12>, <&sys_rst 18>; + vbus-supply = <&usb0_vbus1>; + }; + }; + + /* FIXME: U-Boot own node */ usb0: usb@65b00000 { compatible = "socionext,uniphier-pxs3-dwc3"; status = "disabled"; @@ -483,6 +652,101 @@ }; }; + _usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, + <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pxs3-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pxs3-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs3-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 13>; + reset-names = "link"; + resets = <&sys_rst 13>; + }; + + usb1_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 20>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>, + <&usb_hs_i2>; + }; + + usb1_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs3-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 20>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus1>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>, + <&usb_hs_i2>; + }; + + usb1_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs3-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy", "phy-ext"; + clocks = <&sys_clk 13>, <&sys_clk 21>, + <&sys_clk 14>; + reset-names = "link", "phy"; + resets = <&sys_rst 13>, <&sys_rst 21>; + vbus-supply = <&usb1_vbus0>; + }; + }; + + /* FIXME: U-Boot own node */ usb1: usb@65d00000 { compatible = "socionext,uniphier-pxs3-dwc3"; status = "disabled"; @@ -509,7 +773,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi index 437265bb73..f7fcf6b459 100644 --- a/arch/arm/dts/uniphier-sld8.dtsi +++ b/arch/arm/dts/uniphier-sld8.dtsi @@ -63,6 +63,17 @@ cache-level = <2>; }; + spi: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -385,7 +396,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/arch/arm/dts/vf.dtsi b/arch/arm/dts/vf.dtsi index 5198eee024..ad30059b9a 100644 --- a/arch/arm/dts/vf.dtsi +++ b/arch/arm/dts/vf.dtsi @@ -89,6 +89,12 @@ status = "disabled"; }; + iomuxc: iomuxc@40048000 { + compatible = "fsl,vf610-iomuxc"; + reg = <0x40048000 0x1000>; + fsl,mux_mask = <0x700000>; + }; + gpio0: gpio@40049000 { compatible = "fsl,vf610-gpio"; reg = <0x400ff000 0x40>; diff --git a/arch/arm/dts/vf610-pinfunc.h b/arch/arm/dts/vf610-pinfunc.h new file mode 100644 index 0000000000..fcad7132c8 --- /dev/null +++ b/arch/arm/dts/vf610-pinfunc.h @@ -0,0 +1,810 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_VF610_PINFUNC_H +#define __DTS_VF610_PINFUNC_H + +/* + * The pin function ID for VF610 is a tuple of: + * <mux_reg input_reg mux_mode input_val> + */ + +#define ALT0 0x0 +#define ALT1 0x1 +#define ALT2 0x2 +#define ALT3 0x3 +#define ALT4 0x4 +#define ALT5 0x5 +#define ALT6 0x6 +#define ALT7 0x7 + + +#define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0 +#define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0 +#define VF610_PAD_PTA6__RMII_CLKIN 0x000 0x2F0 ALT2 0x0 +#define VF610_PAD_PTA6__DCU1_TCON11 0x000 0x000 ALT4 0x0 +#define VF610_PAD_PTA6__DCU1_R2 0x000 0x000 ALT7 0x0 +#define VF610_PAD_PTA8__GPIO_1 0x004 0x000 ALT0 0x0 +#define VF610_PAD_PTA8__TCLK 0x004 0x000 ALT1 0x0 +#define VF610_PAD_PTA8__DCU0_R0 0x004 0x000 ALT4 0x0 +#define VF610_PAD_PTA8__MLB_CLK 0x004 0x354 ALT7 0x0 +#define VF610_PAD_PTA9__GPIO_2 0x008 0x000 ALT0 0x0 +#define VF610_PAD_PTA9__TDI 0x008 0x000 ALT1 0x0 +#define VF610_PAD_PTA9__RMII_CLKOUT 0x008 0x000 ALT2 0x0 +#define VF610_PAD_PTA9__RMII_CLKIN 0x008 0x2F0 ALT3 0x1 +#define VF610_PAD_PTA9__DCU0_R1 0x008 0x000 ALT4 0x0 +#define VF610_PAD_PTA9__WDOG_B 0x008 0x000 ALT6 0x0 +#define VF610_PAD_PTA10__GPIO_3 0x00C 0x000 ALT0 0x0 +#define VF610_PAD_PTA10__TDO 0x00C 0x000 ALT1 0x0 +#define VF610_PAD_PTA10__EXT_AUDIO_MCLK 0x00C 0x2EC ALT2 0x0 +#define VF610_PAD_PTA10__DCU0_G0 0x00C 0x000 ALT4 0x0 +#define VF610_PAD_PTA10__ENET_TS_CLKIN 0x00C 0x2F4 ALT6 0x0 +#define VF610_PAD_PTA10__MLB_SIGNAL 0x00C 0x35C ALT7 0x0 +#define VF610_PAD_PTA11__GPIO_4 0x010 0x000 ALT0 0x0 +#define VF610_PAD_PTA11__TMS 0x010 0x000 ALT1 0x0 +#define VF610_PAD_PTA11__DCU0_G1 0x010 0x000 ALT4 0x0 +#define VF610_PAD_PTA11__MLB_DATA 0x010 0x358 ALT7 0x0 +#define VF610_PAD_PTA12__GPIO_5 0x014 0x000 ALT0 0x0 +#define VF610_PAD_PTA12__TRACECK 0x014 0x000 ALT1 0x0 +#define VF610_PAD_PTA12__EXT_AUDIO_MCLK 0x014 0x2EC ALT2 0x1 +#define VF610_PAD_PTA12__VIU_DATA13 0x014 0x000 ALT6 0x0 +#define VF610_PAD_PTA12__I2C0_SCL 0x014 0x33C ALT7 0x0 +#define VF610_PAD_PTA16__GPIO_6 0x018 0x000 ALT0 0x0 +#define VF610_PAD_PTA16__TRACED0 0x018 0x000 ALT1 0x0 +#define VF610_PAD_PTA16__USB0_VBUS_EN 0x018 0x000 ALT2 0x0 +#define VF610_PAD_PTA16__ADC1_SE0 0x018 0x000 ALT3 0x0 +#define VF610_PAD_PTA16__LCD29 0x018 0x000 ALT4 0x0 +#define VF610_PAD_PTA16__SAI2_TX_BCLK 0x018 0x370 ALT5 0x0 +#define VF610_PAD_PTA16__VIU_DATA14 0x018 0x000 ALT6 0x0 +#define VF610_PAD_PTA16__I2C0_SDA 0x018 0x340 ALT7 0x0 +#define VF610_PAD_PTA17__GPIO_7 0x01C 0x000 ALT0 0x0 +#define VF610_PAD_PTA17__TRACED1 0x01C 0x000 ALT1 0x0 +#define VF610_PAD_PTA17__USB0_VBUS_OC 0x01C 0x000 ALT2 0x0 +#define VF610_PAD_PTA17__ADC1_SE1 0x01C 0x000 ALT3 0x0 +#define VF610_PAD_PTA17__LCD30 0x01C 0x000 ALT4 0x0 +#define VF610_PAD_PTA17__USB0_SOF_PULSE 0x01C 0x000 ALT5 0x0 +#define VF610_PAD_PTA17__VIU_DATA15 0x01C 0x000 ALT6 0x0 +#define VF610_PAD_PTA17__I2C1_SCL 0x01C 0x344 ALT7 0x0 +#define VF610_PAD_PTA18__GPIO_8 0x020 0x000 ALT0 0x0 +#define VF610_PAD_PTA18__TRACED2 0x020 0x000 ALT1 0x0 +#define VF610_PAD_PTA18__ADC0_SE0 0x020 0x000 ALT2 0x0 +#define VF610_PAD_PTA18__FTM1_QD_PHA 0x020 0x334 ALT3 0x0 +#define VF610_PAD_PTA18__LCD31 0x020 0x000 ALT4 0x0 +#define VF610_PAD_PTA18__SAI2_TX_DATA 0x020 0x000 ALT5 0x0 +#define VF610_PAD_PTA18__VIU_DATA16 0x020 0x000 ALT6 0x0 +#define VF610_PAD_PTA18__I2C1_SDA 0x020 0x348 ALT7 0x0 +#define VF610_PAD_PTA19__GPIO_9 0x024 0x000 ALT0 0x0 +#define VF610_PAD_PTA19__TRACED3 0x024 0x000 ALT1 0x0 +#define VF610_PAD_PTA19__ADC0_SE1 0x024 0x000 ALT2 0x0 +#define VF610_PAD_PTA19__FTM1_QD_PHB 0x024 0x338 ALT3 0x0 +#define VF610_PAD_PTA19__LCD32 0x024 0x000 ALT4 0x0 +#define VF610_PAD_PTA19__SAI2_TX_SYNC 0x024 0x000 ALT5 0x0 +#define VF610_PAD_PTA19__VIU_DATA17 0x024 0x000 ALT6 0x0 +#define VF610_PAD_PTA19__QSPI1_A_QSCK 0x024 0x374 ALT7 0x0 +#define VF610_PAD_PTA20__GPIO_10 0x028 0x000 ALT0 0x0 +#define VF610_PAD_PTA20__TRACED4 0x028 0x000 ALT1 0x0 +#define VF610_PAD_PTA20__LCD33 0x028 0x000 ALT4 0x0 +#define VF610_PAD_PTA20__UART3_TX 0x028 0x394 ALT6 0x0 +#define VF610_PAD_PTA20__DCU1_HSYNC 0x028 0x000 ALT7 0x0 +#define VF610_PAD_PTA21__GPIO_11 0x02C 0x000 ALT0 0x0 +#define VF610_PAD_PTA21__TRACED5 0x02C 0x000 ALT1 0x0 +#define VF610_PAD_PTA21__SAI2_RX_BCLK 0x02C 0x364 ALT5 0x0 +#define VF610_PAD_PTA21__UART3_RX 0x02C 0x390 ALT6 0x0 +#define VF610_PAD_PTA21__DCU1_VSYNC 0x02C 0x000 ALT7 0x0 +#define VF610_PAD_PTA22__GPIO_12 0x030 0x000 ALT0 0x0 +#define VF610_PAD_PTA22__TRACED6 0x030 0x000 ALT1 0x0 +#define VF610_PAD_PTA22__SAI2_RX_DATA 0x030 0x368 ALT5 0x0 +#define VF610_PAD_PTA22__I2C2_SCL 0x030 0x34C ALT6 0x0 +#define VF610_PAD_PTA22__DCU1_TAG 0x030 0x000 ALT7 0x0 +#define VF610_PAD_PTA23__GPIO_13 0x034 0x000 ALT0 0x0 +#define VF610_PAD_PTA23__TRACED7 0x034 0x000 ALT1 0x0 +#define VF610_PAD_PTA23__SAI2_RX_SYNC 0x034 0x36C ALT5 0x0 +#define VF610_PAD_PTA23__I2C2_SDA 0x034 0x350 ALT6 0x0 +#define VF610_PAD_PTA23__DCU1_DE 0x034 0x000 ALT7 0x0 +#define VF610_PAD_PTA24__GPIO_14 0x038 0x000 ALT0 0x0 +#define VF610_PAD_PTA24__TRACED8 0x038 0x000 ALT1 0x0 +#define VF610_PAD_PTA24__USB1_VBUS_EN 0x038 0x000 ALT2 0x0 +#define VF610_PAD_PTA24__ESDHC1_CLK 0x038 0x000 ALT5 0x0 +#define VF610_PAD_PTA24__DCU1_TCON4 0x038 0x000 ALT6 0x0 +#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL 0x038 0x000 ALT7 0x0 +#define VF610_PAD_PTA25__GPIO_15 0x03C 0x000 ALT0 0x0 +#define VF610_PAD_PTA25__TRACED9 0x03C 0x000 ALT1 0x0 +#define VF610_PAD_PTA25__USB1_VBUS_OC 0x03C 0x000 ALT2 0x0 +#define VF610_PAD_PTA25__ESDHC1_CMD 0x03C 0x000 ALT5 0x0 +#define VF610_PAD_PTA25__DCU1_TCON5 0x03C 0x000 ALT6 0x0 +#define VF610_PAD_PTA26__GPIO_16 0x040 0x000 ALT0 0x0 +#define VF610_PAD_PTA26__TRACED10 0x040 0x000 ALT1 0x0 +#define VF610_PAD_PTA26__SAI3_TX_BCLK 0x040 0x000 ALT2 0x0 +#define VF610_PAD_PTA26__ESDHC1_DAT0 0x040 0x000 ALT5 0x0 +#define VF610_PAD_PTA26__DCU1_TCON6 0x040 0x000 ALT6 0x0 +#define VF610_PAD_PTA27__GPIO_17 0x044 0x000 ALT0 0x0 +#define VF610_PAD_PTA27__TRACED11 0x044 0x000 ALT1 0x0 +#define VF610_PAD_PTA27__SAI3_RX_BCLK 0x044 0x000 ALT2 0x0 +#define VF610_PAD_PTA27__ESDHC1_DAT1 0x044 0x000 ALT5 0x0 +#define VF610_PAD_PTA27__DCU1_TCON7 0x044 0x000 ALT6 0x0 +#define VF610_PAD_PTA28__GPIO_18 0x048 0x000 ALT0 0x0 +#define VF610_PAD_PTA28__TRACED12 0x048 0x000 ALT1 0x0 +#define VF610_PAD_PTA28__SAI3_RX_DATA 0x048 0x000 ALT2 0x0 +#define VF610_PAD_PTA28__ENET1_1588_TMR0 0x048 0x000 ALT3 0x0 +#define VF610_PAD_PTA28__UART4_TX 0x048 0x000 ALT4 0x0 +#define VF610_PAD_PTA28__ESDHC1_DATA2 0x048 0x000 ALT5 0x0 +#define VF610_PAD_PTA28__DCU1_TCON8 0x048 0x000 ALT6 0x0 +#define VF610_PAD_PTA29__GPIO_19 0x04C 0x000 ALT0 0x0 +#define VF610_PAD_PTA29__TRACED13 0x04C 0x000 ALT1 0x0 +#define VF610_PAD_PTA29__SAI3_TX_DATA 0x04C 0x000 ALT2 0x0 +#define VF610_PAD_PTA29__ENET1_1588_TMR1 0x04C 0x000 ALT3 0x0 +#define VF610_PAD_PTA29__UART4_RX 0x04C 0x000 ALT4 0x0 +#define VF610_PAD_PTA29__ESDHC1_DAT3 0x04C 0x000 ALT5 0x0 +#define VF610_PAD_PTA29__DCU1_TCON9 0x04C 0x000 ALT6 0x0 +#define VF610_PAD_PTA30__GPIO_20 0x050 0x000 ALT0 0x0 +#define VF610_PAD_PTA30__TRACED14 0x050 0x000 ALT1 0x0 +#define VF610_PAD_PTA30__SAI3_RX_SYNC 0x050 0x000 ALT2 0x0 +#define VF610_PAD_PTA30__ENET1_1588_TMR2 0x050 0x000 ALT3 0x0 +#define VF610_PAD_PTA30__UART4_RTS 0x050 0x000 ALT4 0x0 +#define VF610_PAD_PTA30__I2C3_SCL 0x050 0x000 ALT5 0x0 +#define VF610_PAD_PTA30__UART3_TX 0x050 0x394 ALT7 0x1 +#define VF610_PAD_PTA31__GPIO_21 0x054 0x000 ALT0 0x0 +#define VF610_PAD_PTA31__TRACED15 0x054 0x000 ALT1 0x0 +#define VF610_PAD_PTA31__SAI3_TX_SYNC 0x054 0x000 ALT2 0x0 +#define VF610_PAD_PTA31__ENET1_1588_TMR3 0x054 0x000 ALT3 0x0 +#define VF610_PAD_PTA31__UART4_CTS 0x054 0x000 ALT4 0x0 +#define VF610_PAD_PTA31__I2C3_SDA 0x054 0x000 ALT5 0x0 +#define VF610_PAD_PTA31__UART3_RX 0x054 0x390 ALT7 0x1 +#define VF610_PAD_PTB0__GPIO_22 0x058 0x000 ALT0 0x0 +#define VF610_PAD_PTB0__FTM0_CH0 0x058 0x000 ALT1 0x0 +#define VF610_PAD_PTB0__ADC0_SE2 0x058 0x000 ALT2 0x0 +#define VF610_PAD_PTB0__TRACE_CTL 0x058 0x000 ALT3 0x0 +#define VF610_PAD_PTB0__LCD34 0x058 0x000 ALT4 0x0 +#define VF610_PAD_PTB0__SAI2_RX_BCLK 0x058 0x364 ALT5 0x1 +#define VF610_PAD_PTB0__VIU_DATA18 0x058 0x000 ALT6 0x0 +#define VF610_PAD_PTB0__QSPI1_A_QPCS0 0x058 0x000 ALT7 0x0 +#define VF610_PAD_PTB1__GPIO_23 0x05C 0x000 ALT0 0x0 +#define VF610_PAD_PTB1__FTM0_CH1 0x05C 0x000 ALT1 0x0 +#define VF610_PAD_PTB1__ADC0_SE3 0x05C 0x000 ALT2 0x0 +#define VF610_PAD_PTB1__SRC_RCON30 0x05C 0x000 ALT3 0x0 +#define VF610_PAD_PTB1__LCD35 0x05C 0x000 ALT4 0x0 +#define VF610_PAD_PTB1__SAI2_RX_DATA 0x05C 0x368 ALT5 0x1 +#define VF610_PAD_PTB1__VIU_DATA19 0x05C 0x000 ALT6 0x0 +#define VF610_PAD_PTB1__QSPI1_A_DATA3 0x05C 0x000 ALT7 0x0 +#define VF610_PAD_PTB2__GPIO_24 0x060 0x000 ALT0 0x0 +#define VF610_PAD_PTB2__FTM0_CH2 0x060 0x000 ALT1 0x0 +#define VF610_PAD_PTB2__ADC1_SE2 0x060 0x000 ALT2 0x0 +#define VF610_PAD_PTB2__SRC_RCON31 0x060 0x000 ALT3 0x0 +#define VF610_PAD_PTB2__LCD36 0x060 0x000 ALT4 0x0 +#define VF610_PAD_PTB2__SAI2_RX_SYNC 0x060 0x36C ALT5 0x1 +#define VF610_PAD_PTB2__VIDEO_IN0_DATA20 0x060 0x000 ALT6 0x0 +#define VF610_PAD_PTB2__QSPI1_A_DATA2 0x060 0x000 ALT7 0x0 +#define VF610_PAD_PTB3__GPIO_25 0x064 0x000 ALT0 0x0 +#define VF610_PAD_PTB3__FTM0_CH3 0x064 0x000 ALT1 0x0 +#define VF610_PAD_PTB3__ADC1_SE3 0x064 0x000 ALT2 0x0 +#define VF610_PAD_PTB3__PDB_EXTRIG 0x064 0x000 ALT3 0x0 +#define VF610_PAD_PTB3__LCD37 0x064 0x000 ALT4 0x0 +#define VF610_PAD_PTB3__VIU_DATA21 0x064 0x000 ALT6 0x0 +#define VF610_PAD_PTB3__QSPI1_A_DATA1 0x064 0x000 ALT7 0x0 +#define VF610_PAD_PTB4__GPIO_26 0x068 0x000 ALT0 0x0 +#define VF610_PAD_PTB4__FTM0_CH4 0x068 0x000 ALT1 0x0 +#define VF610_PAD_PTB4__UART1_TX 0x068 0x380 ALT2 0x0 +#define VF610_PAD_PTB4__ADC0_SE4 0x068 0x000 ALT3 0x0 +#define VF610_PAD_PTB4__LCD38 0x068 0x000 ALT4 0x0 +#define VF610_PAD_PTB4__VIU_FID 0x068 0x3A8 ALT5 0x0 +#define VF610_PAD_PTB4__VIU_DATA22 0x068 0x000 ALT6 0x0 +#define VF610_PAD_PTB4__QSPI1_A_DATA0 0x068 0x000 ALT7 0x0 +#define VF610_PAD_PTB5__GPIO_27 0x06C 0x000 ALT0 0x0 +#define VF610_PAD_PTB5__FTM0_CH5 0x06C 0x000 ALT1 0x0 +#define VF610_PAD_PTB5__UART1_RX 0x06C 0x37C ALT2 0x0 +#define VF610_PAD_PTB5__ADC1_SE4 0x06C 0x000 ALT3 0x0 +#define VF610_PAD_PTB5__LCD39 0x06C 0x000 ALT4 0x0 +#define VF610_PAD_PTB5__VIU_DE 0x06C 0x3A4 ALT5 0x0 +#define VF610_PAD_PTB5__QSPI1_A_DQS 0x06C 0x000 ALT7 0x0 +#define VF610_PAD_PTB6__GPIO_28 0x070 0x000 ALT0 0x0 +#define VF610_PAD_PTB6__FTM0_CH6 0x070 0x000 ALT1 0x0 +#define VF610_PAD_PTB6__UART1_RTS 0x070 0x000 ALT2 0x0 +#define VF610_PAD_PTB6__QSPI0_QPCS1_A 0x070 0x000 ALT3 0x0 +#define VF610_PAD_PTB6__LCD_LCD40 0x070 0x000 ALT4 0x0 +#define VF610_PAD_PTB6__FB_CLKOUT 0x070 0x000 ALT5 0x0 +#define VF610_PAD_PTB6__VIU_HSYNC 0x070 0x000 ALT6 0x0 +#define VF610_PAD_PTB6__UART2_TX 0x070 0x38C ALT7 0x0 +#define VF610_PAD_PTB7__GPIO_29 0x074 0x000 ALT0 0x0 +#define VF610_PAD_PTB7__FTM0_CH7 0x074 0x000 ALT1 0x0 +#define VF610_PAD_PTB7__UART1_CTS 0x074 0x378 ALT2 0x0 +#define VF610_PAD_PTB7__QSPI0_B_QPCS1 0x074 0x000 ALT3 0x0 +#define VF610_PAD_PTB7__LCD41 0x074 0x000 ALT4 0x0 +#define VF610_PAD_PTB7__VIU_VSYNC 0x074 0x000 ALT6 0x0 +#define VF610_PAD_PTB7__UART2_RX 0x074 0x388 ALT7 0x0 +#define VF610_PAD_PTB8__GPIO_30 0x078 0x000 ALT0 0x0 +#define VF610_PAD_PTB8__FTM1_CH0 0x078 0x32C ALT1 0x0 +#define VF610_PAD_PTB8__FTM1_QD_PHA 0x078 0x334 ALT3 0x1 +#define VF610_PAD_PTB8__VIU_DE 0x078 0x3A4 ALT5 0x1 +#define VF610_PAD_PTB8__DCU1_R6 0x078 0x000 ALT7 0x0 +#define VF610_PAD_PTB9__GPIO_31 0x07C 0x000 ALT0 0x0 +#define VF610_PAD_PTB9__FTM1_CH1 0x07C 0x330 ALT1 0x0 +#define VF610_PAD_PTB9__FTM1_QD_PHB 0x07C 0x338 ALT3 0x1 +#define VF610_PAD_PTB9__DCU1_R7 0x07C 0x000 ALT7 0x0 +#define VF610_PAD_PTB10__GPIO_32 0x080 0x000 ALT0 0x0 +#define VF610_PAD_PTB10__UART0_TX 0x080 0x000 ALT1 0x0 +#define VF610_PAD_PTB10__DCU0_TCON4 0x080 0x000 ALT4 0x0 +#define VF610_PAD_PTB10__VIU_DE 0x080 0x3A4 ALT5 0x2 +#define VF610_PAD_PTB10__CKO1 0x080 0x000 ALT6 0x0 +#define VF610_PAD_PTB10__ENET_TS_CLKIN 0x080 0x2F4 ALT7 0x1 +#define VF610_PAD_PTB11__GPIO_33 0x084 0x000 ALT0 0x0 +#define VF610_PAD_PTB11__UART0_RX 0x084 0x000 ALT1 0x0 +#define VF610_PAD_PTB11__DCU0_TCON5 0x084 0x000 ALT4 0x0 +#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B 0x084 0x000 ALT5 0x0 +#define VF610_PAD_PTB11__CKO2 0x084 0x000 ALT6 0x0 +#define VF610_PAD_PTB11_ENET0_1588_TMR0 0x084 0x304 ALT7 0x0 +#define VF610_PAD_PTB12__GPIO_34 0x088 0x000 ALT0 0x0 +#define VF610_PAD_PTB12__UART0_RTS 0x088 0x000 ALT1 0x0 +#define VF610_PAD_PTB12__DSPI0_CS5 0x088 0x000 ALT3 0x0 +#define VF610_PAD_PTB12__DCU0_TCON6 0x088 0x000 ALT4 0x0 +#define VF610_PAD_PTB12__FB_AD1 0x088 0x000 ALT5 0x0 +#define VF610_PAD_PTB12__NMI 0x088 0x000 ALT6 0x0 +#define VF610_PAD_PTB12__ENET0_1588_TMR1 0x088 0x308 ALT7 0x0 +#define VF610_PAD_PTB13__GPIO_35 0x08C 0x000 ALT0 0x0 +#define VF610_PAD_PTB13__UART0_CTS 0x08C 0x000 ALT1 0x0 +#define VF610_PAD_PTB13__DSPI0_CS4 0x08C 0x000 ALT3 0x0 +#define VF610_PAD_PTB13__DCU0_TCON7 0x08C 0x000 ALT4 0x0 +#define VF610_PAD_PTB13__FB_AD0 0x08C 0x000 ALT5 0x0 +#define VF610_PAD_PTB13__TRACE_CTL 0x08C 0x000 ALT6 0x0 +#define VF610_PAD_PTB14__GPIO_36 0x090 0x000 ALT0 0x0 +#define VF610_PAD_PTB14__CAN0_RX 0x090 0x000 ALT1 0x0 +#define VF610_PAD_PTB14__I2C0_SCL 0x090 0x33C ALT2 0x1 +#define VF610_PAD_PTB14__DCU0_TCON8 0x090 0x000 ALT4 0x0 +#define VF610_PAD_PTB14__DCU1_PCLK 0x090 0x000 ALT7 0x0 +#define VF610_PAD_PTB15__GPIO_37 0x094 0x000 ALT0 0x0 +#define VF610_PAD_PTB15__CAN0_TX 0x094 0x000 ALT1 0x0 +#define VF610_PAD_PTB15__I2C0_SDA 0x094 0x340 ALT2 0x1 +#define VF610_PAD_PTB15__DCU0_TCON9 0x094 0x000 ALT4 0x0 +#define VF610_PAD_PTB15__VIU_PIX_CLK 0x094 0x3AC ALT7 0x0 +#define VF610_PAD_PTB16__GPIO_38 0x098 0x000 ALT0 0x0 +#define VF610_PAD_PTB16__CAN1_RX 0x098 0x000 ALT1 0x0 +#define VF610_PAD_PTB16__I2C1_SCL 0x098 0x344 ALT2 0x1 +#define VF610_PAD_PTB16__DCU0_TCON10 0x098 0x000 ALT4 0x0 +#define VF610_PAD_PTB17__GPIO_39 0x09C 0x000 ALT0 0x0 +#define VF610_PAD_PTB17__CAN1_TX 0x09C 0x000 ALT1 0x0 +#define VF610_PAD_PTB17__I2C1_SDA 0x09C 0x348 ALT2 0x1 +#define VF610_PAD_PTB17__DCU0_TCON11 0x09C 0x000 ALT4 0x0 +#define VF610_PAD_PTB18__GPIO_40 0x0A0 0x000 ALT0 0x0 +#define VF610_PAD_PTB18__DSPI0_CS1 0x0A0 0x000 ALT1 0x0 +#define VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x0A0 0x2EC ALT2 0x2 +#define VF610_PAD_PTB18__VIU_DATA9 0x0A0 0x000 ALT6 0x0 +#define VF610_PAD_PTB19__GPIO_41 0x0A4 0x000 ALT0 0x0 +#define VF610_PAD_PTB19__DSPI0_CS0 0x0A4 0x000 ALT1 0x0 +#define VF610_PAD_PTB19__VIU_DATA10 0x0A4 0x000 ALT6 0x0 +#define VF610_PAD_PTB20__GPIO_42 0x0A8 0x000 ALT0 0x0 +#define VF610_PAD_PTB20__DSPI0_SIN 0x0A8 0x000 ALT1 0x0 +#define VF610_PAD_PTB20__LCD42 0x0A8 0x000 ALT4 0x0 +#define VF610_PAD_PTB20__VIU_DATA11 0x0A8 0x000 ALT6 0x0 +#define VF610_PAD_PTB21__GPIO_43 0x0AC 0x000 ALT0 0x0 +#define VF610_PAD_PTB21__DSPI0_SOUT 0x0AC 0x000 ALT1 0x0 +#define VF610_PAD_PTB21__LCD43 0x0AC 0x000 ALT4 0x0 +#define VF610_PAD_PTB21__VIU_DATA12 0x0AC 0x000 ALT6 0x0 +#define VF610_PAD_PTB21__DCU1_PCLK 0x0AC 0x000 ALT7 0x0 +#define VF610_PAD_PTB22__GPIO_44 0x0B0 0x000 ALT0 0x0 +#define VF610_PAD_PTB22__DSPI0_SCK 0x0B0 0x000 ALT1 0x0 +#define VF610_PAD_PTB22__VLCD 0x0B0 0x000 ALT4 0x0 +#define VF610_PAD_PTB22__VIU_FID 0x0B0 0x3A8 ALT5 0x1 +#define VF610_PAD_PTC0__GPIO_45 0x0B4 0x000 ALT0 0x0 +#define VF610_PAD_PTC0__ENET_RMII0_MDC 0x0B4 0x000 ALT1 0x0 +#define VF610_PAD_PTC0__FTM1_CH0 0x0B4 0x32C ALT2 0x1 +#define VF610_PAD_PTC0__DSPI0_CS3 0x0B4 0x000 ALT3 0x0 +#define VF610_PAD_PTC0__ESAI_SCKT 0x0B4 0x310 ALT4 0x0 +#define VF610_PAD_PTC0__ESDHC0_CLK 0x0B4 0x000 ALT5 0x0 +#define VF610_PAD_PTC0__VIU_DATA0 0x0B4 0x000 ALT6 0x0 +#define VF610_PAD_PTC0__SRC_RCON18 0x0B4 0x398 ALT7 0x0 +#define VF610_PAD_PTC1__GPIO_46 0x0B8 0x000 ALT0 0x0 +#define VF610_PAD_PTC1__ENET_RMII0_MDIO 0x0B8 0x000 ALT1 0x0 +#define VF610_PAD_PTC1__FTM1_CH1 0x0B8 0x330 ALT2 0x1 +#define VF610_PAD_PTC1__DSPI0_CS2 0x0B8 0x000 ALT3 0x0 +#define VF610_PAD_PTC1__ESAI_FST 0x0B8 0x30C ALT4 0x0 +#define VF610_PAD_PTC1__ESDHC0_CMD 0x0B8 0x000 ALT5 0x0 +#define VF610_PAD_PTC1__VIU_DATA1 0x0B8 0x000 ALT6 0x0 +#define VF610_PAD_PTC1__SRC_RCON19 0x0B8 0x39C ALT7 0x0 +#define VF610_PAD_PTC2__GPIO_47 0x0BC 0x000 ALT0 0x0 +#define VF610_PAD_PTC2__ENET_RMII0_CRS 0x0BC 0x000 ALT1 0x0 +#define VF610_PAD_PTC2__UART1_TX 0x0BC 0x380 ALT2 0x1 +#define VF610_PAD_PTC2__ESAI_SDO0 0x0BC 0x314 ALT4 0x0 +#define VF610_PAD_PTC2__ESDHC0_DAT0 0x0BC 0x000 ALT5 0x0 +#define VF610_PAD_PTC2__VIU_DATA2 0x0BC 0x000 ALT6 0x0 +#define VF610_PAD_PTC2__SRC_RCON20 0x0BC 0x3A0 ALT7 0x0 +#define VF610_PAD_PTC3__GPIO_48 0x0C0 0x000 ALT0 0x0 +#define VF610_PAD_PTC3__ENET_RMII0_RXD1 0x0C0 0x000 ALT1 0x0 +#define VF610_PAD_PTC3__UART1_RX 0x0C0 0x37C ALT2 0x1 +#define VF610_PAD_PTC3__ESAI_SDO1 0x0C0 0x318 ALT4 0x0 +#define VF610_PAD_PTC3__ESDHC0_DAT1 0x0C0 0x000 ALT5 0x0 +#define VF610_PAD_PTC3__VIU_DATA3 0x0C0 0x000 ALT6 0x0 +#define VF610_PAD_PTC3__DCU0_R0 0x0C0 0x000 ALT7 0x0 +#define VF610_PAD_PTC4__GPIO_49 0x0C4 0x000 ALT0 0x0 +#define VF610_PAD_PTC4__ENET_RMII0_RXD0 0x0C4 0x000 ALT1 0x0 +#define VF610_PAD_PTC4__UART1_RTS 0x0C4 0x000 ALT2 0x0 +#define VF610_PAD_PTC4__DSPI1_CS1 0x0C4 0x000 ALT3 0x0 +#define VF610_PAD_PTC4__ESAI_SDO2 0x0C4 0x31C ALT4 0x0 +#define VF610_PAD_PTC4__ESDHC0_DAT2 0x0C4 0x000 ALT5 0x0 +#define VF610_PAD_PTC4__VIU_DATA4 0x0C4 0x000 ALT6 0x0 +#define VF610_PAD_PTC4__DCU0_R1 0x0C4 0x000 ALT7 0x0 +#define VF610_PAD_PTC5__GPIO_50 0x0C8 0x000 ALT0 0x0 +#define VF610_PAD_PTC5__ENET_RMII0_RXER 0x0C8 0x000 ALT1 0x0 +#define VF610_PAD_PTC5__UART1_CTS 0x0C8 0x378 ALT2 0x1 +#define VF610_PAD_PTC5__DSPI1_CS0 0x0C8 0x300 ALT3 0x0 +#define VF610_PAD_PTC5__ESAI_SDO3 0x0C8 0x320 ALT4 0x0 +#define VF610_PAD_PTC5__ESDHC0_DAT3 0x0C8 0x000 ALT5 0x0 +#define VF610_PAD_PTC5__VIU_DATA5 0x0C8 0x000 ALT6 0x0 +#define VF610_PAD_PTC5__DCU0_G0 0x0C8 0x000 ALT7 0x0 +#define VF610_PAD_PTC6__GPIO_51 0x0CC 0x000 ALT0 0x0 +#define VF610_PAD_PTC6__ENET_RMII0_TXD1 0x0CC 0x000 ALT1 0x0 +#define VF610_PAD_PTC6__DSPI1_SIN 0x0CC 0x2FC ALT3 0x0 +#define VF610_PAD_PTC6__ESAI_SDI0 0x0CC 0x328 ALT4 0x0 +#define VF610_PAD_PTC6__ESDHC0_WP 0x0CC 0x000 ALT5 0x0 +#define VF610_PAD_PTC6__VIU_DATA6 0x0CC 0x000 ALT6 0x0 +#define VF610_PAD_PTC6__DCU0_G1 0x0CC 0x000 ALT7 0x0 +#define VF610_PAD_PTC7__GPIO_52 0x0D0 0x000 ALT0 0x0 +#define VF610_PAD_PTC7__ENET_RMII0_TXD0 0x0D0 0x000 ALT1 0x0 +#define VF610_PAD_PTC7__DSPI1_SOUT 0x0D0 0x000 ALT3 0x0 +#define VF610_PAD_PTC7__ESAI_SDI1 0x0D0 0x324 ALT4 0x0 +#define VF610_PAD_PTC7__VIU_DATA7 0x0D0 0x000 ALT6 0x0 +#define VF610_PAD_PTC7__DCU0_B0 0x0D0 0x000 ALT7 0x0 +#define VF610_PAD_PTC8__GPIO_53 0x0D4 0x000 ALT0 0x0 +#define VF610_PAD_PTC8__ENET_RMII0_TXEN 0x0D4 0x000 ALT1 0x0 +#define VF610_PAD_PTC8__DSPI1_SCK 0x0D4 0x2F8 ALT3 0x0 +#define VF610_PAD_PTC8__VIU_DATA8 0x0D4 0x000 ALT6 0x0 +#define VF610_PAD_PTC8__DCU0_B1 0x0D4 0x000 ALT7 0x0 +#define VF610_PAD_PTC9__GPIO_54 0x0D8 0x000 ALT0 0x0 +#define VF610_PAD_PTC9__ENET_RMII1_MDC 0x0D8 0x000 ALT1 0x0 +#define VF610_PAD_PTC9__ESAI_SCKT 0x0D8 0x310 ALT3 0x1 +#define VF610_PAD_PTC9__MLB_CLK 0x0D8 0x354 ALT6 0x1 +#define VF610_PAD_PTC9__DEBUG_OUT0 0x0D8 0x000 ALT7 0x0 +#define VF610_PAD_PTC10__GPIO_55 0x0DC 0x000 ALT0 0x0 +#define VF610_PAD_PTC10__ENET_RMII1_MDIO 0x0DC 0x000 ALT1 0x0 +#define VF610_PAD_PTC10__ESAI_FST 0x0DC 0x30C ALT3 0x1 +#define VF610_PAD_PTC10__MLB_SIGNAL 0x0DC 0x35C ALT6 0x1 +#define VF610_PAD_PTC10__DEBUG_OUT1 0x0DC 0x000 ALT7 0x0 +#define VF610_PAD_PTC11__GPIO_56 0x0E0 0x000 ALT0 0x0 +#define VF610_PAD_PTC11__ENET_RMII1_CRS 0x0E0 0x000 ALT1 0x0 +#define VF610_PAD_PTC11__ESAI_SDO0 0x0E0 0x314 ALT3 0x1 +#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1 +#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0 +#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0 +#define VF610_PAD_PTC12__ENET_RMII1_RXD1 0x0E4 0x000 ALT1 0x0 +#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1 +#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1 +#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0 +#define VF610_PAD_PTC13__GPIO_58 0x0E8 0x000 ALT0 0x0 +#define VF610_PAD_PTC13__ENET_RMII1_RXD0 0x0E8 0x000 ALT1 0x0 +#define VF610_PAD_PTC13__ESAI_SDO2 0x0E8 0x31C ALT3 0x1 +#define VF610_PAD_PTC13__SAI2_RX_BCLK 0x0E8 0x364 ALT5 0x2 +#define VF610_PAD_PTC13__DEBUG_OUT4 0x0E8 0x000 ALT7 0x0 +#define VF610_PAD_PTC14__GPIO_59 0x0EC 0x000 ALT0 0x0 +#define VF610_PAD_PTC14__ENET_RMII1_RXER 0x0EC 0x000 ALT1 0x0 +#define VF610_PAD_PTC14__ESAI_SDO3 0x0EC 0x320 ALT3 0x1 +#define VF610_PAD_PTC14__UART5_TX 0x0EC 0x000 ALT4 0x0 +#define VF610_PAD_PTC14__SAI2_RX_DATA 0x0EC 0x368 ALT5 0x2 +#define VF610_PAD_PTC14__ADC0_SE6 0x0EC 0x000 ALT6 0x0 +#define VF610_PAD_PTC14__DEBUG_OUT5 0x0EC 0x000 ALT7 0x0 +#define VF610_PAD_PTC15__GPIO_60 0x0F0 0x000 ALT0 0x0 +#define VF610_PAD_PTC15__ENET_RMII1_TXD1 0x0F0 0x000 ALT1 0x0 +#define VF610_PAD_PTC15__ESAI_SDI0 0x0F0 0x328 ALT3 0x1 +#define VF610_PAD_PTC15__UART5_RX 0x0F0 0x000 ALT4 0x0 +#define VF610_PAD_PTC15__SAI2_TX_DATA 0x0F0 0x000 ALT5 0x0 +#define VF610_PAD_PTC15__ADC0_SE7 0x0F0 0x000 ALT6 0x0 +#define VF610_PAD_PTC15__DEBUG_OUT6 0x0F0 0x000 ALT7 0x0 +#define VF610_PAD_PTC16__GPIO_61 0x0F4 0x000 ALT0 0x0 +#define VF610_PAD_PTC16__ENET_RMII1_TXD0 0x0F4 0x000 ALT1 0x0 +#define VF610_PAD_PTC16__ESAI_SDI1 0x0F4 0x324 ALT3 0x1 +#define VF610_PAD_PTC16__UART5_RTS 0x0F4 0x000 ALT4 0x0 +#define VF610_PAD_PTC16__SAI2_RX_SYNC 0x0F4 0x36C ALT5 0x2 +#define VF610_PAD_PTC16__ADC1_SE6 0x0F4 0x000 ALT6 0x0 +#define VF610_PAD_PTC16__DEBUG_OUT7 0x0F4 0x000 ALT7 0x0 +#define VF610_PAD_PTC17__GPIO_62 0x0F8 0x000 ALT0 0x0 +#define VF610_PAD_PTC17__ENET_RMII1_TXEN 0x0F8 0x000 ALT1 0x0 +#define VF610_PAD_PTC17__ADC1_SE7 0x0F8 0x000 ALT3 0x0 +#define VF610_PAD_PTC17__UART5_CTS 0x0F8 0x000 ALT4 0x0 +#define VF610_PAD_PTC17__SAI2_TX_SYNC 0x0F8 0x374 ALT5 0x1 +#define VF610_PAD_PTC17__USB1_SOF_PULSE 0x0F8 0x000 ALT6 0x0 +#define VF610_PAD_PTC17__DEBUG_OUT8 0x0F8 0x000 ALT7 0x0 +#define VF610_PAD_PTD31__GPIO_63 0x0FC 0x000 ALT0 0x0 +#define VF610_PAD_PTD31__FB_AD31 0x0FC 0x000 ALT1 0x0 +#define VF610_PAD_PTD31__NF_IO15 0x0FC 0x000 ALT2 0x0 +#define VF610_PAD_PTD31__FTM3_CH0 0x0FC 0x000 ALT4 0x0 +#define VF610_PAD_PTD31__DSPI2_CS1 0x0FC 0x000 ALT5 0x0 +#define VF610_PAD_PTD31__DEBUG_OUT9 0x0FC 0x000 ALT7 0x0 +#define VF610_PAD_PTD30__GPIO_64 0x100 0x000 ALT0 0x0 +#define VF610_PAD_PTD30__FB_AD30 0x100 0x000 ALT1 0x0 +#define VF610_PAD_PTD30__NF_IO14 0x100 0x000 ALT2 0x0 +#define VF610_PAD_PTD30__FTM3_CH1 0x100 0x000 ALT4 0x0 +#define VF610_PAD_PTD30__DSPI2_CS0 0x100 0x000 ALT5 0x0 +#define VF610_PAD_PTD30__DEBUG_OUT10 0x100 0x000 ALT7 0x0 +#define VF610_PAD_PTD29__GPIO_65 0x104 0x000 ALT0 0x0 +#define VF610_PAD_PTD29__FB_AD29 0x104 0x000 ALT1 0x0 +#define VF610_PAD_PTD29__NF_IO13 0x104 0x000 ALT2 0x0 +#define VF610_PAD_PTD29__FTM3_CH2 0x104 0x000 ALT4 0x0 +#define VF610_PAD_PTD29__DSPI2_SIN 0x104 0x000 ALT5 0x0 +#define VF610_PAD_PTD29__DEBUG_OUT11 0x104 0x000 ALT7 0x0 +#define VF610_PAD_PTD28__GPIO_66 0x108 0x000 ALT0 0x0 +#define VF610_PAD_PTD28__FB_AD28 0x108 0x000 ALT1 0x0 +#define VF610_PAD_PTD28__NF_IO12 0x108 0x000 ALT2 0x0 +#define VF610_PAD_PTD28__I2C2_SCL 0x108 0x34C ALT3 0x1 +#define VF610_PAD_PTD28__FTM3_CH3 0x108 0x000 ALT4 0x0 +#define VF610_PAD_PTD28__DSPI2_SOUT 0x108 0x000 ALT5 0x0 +#define VF610_PAD_PTD28__DEBUG_OUT12 0x108 0x000 ALT7 0x0 +#define VF610_PAD_PTD27__GPIO_67 0x10C 0x000 ALT0 0x0 +#define VF610_PAD_PTD27__FB_AD27 0x10C 0x000 ALT1 0x0 +#define VF610_PAD_PTD27__NF_IO11 0x10C 0x000 ALT2 0x0 +#define VF610_PAD_PTD27__I2C2_SDA 0x10C 0x350 ALT3 0x1 +#define VF610_PAD_PTD27__FTM3_CH4 0x10C 0x000 ALT4 0x0 +#define VF610_PAD_PTD27__DSPI2_SCK 0x10C 0x000 ALT5 0x0 +#define VF610_PAD_PTD27__DEBUG_OUT13 0x10C 0x000 ALT7 0x0 +#define VF610_PAD_PTD26__GPIO_68 0x110 0x000 ALT0 0x0 +#define VF610_PAD_PTD26__FB_AD26 0x110 0x000 ALT1 0x0 +#define VF610_PAD_PTD26__NF_IO10 0x110 0x000 ALT2 0x0 +#define VF610_PAD_PTD26__FTM3_CH5 0x110 0x000 ALT4 0x0 +#define VF610_PAD_PTD26__ESDHC1_WP 0x110 0x000 ALT5 0x0 +#define VF610_PAD_PTD26__DEBUG_OUT14 0x110 0x000 ALT7 0x0 +#define VF610_PAD_PTD25__GPIO_69 0x114 0x000 ALT0 0x0 +#define VF610_PAD_PTD25__FB_AD25 0x114 0x000 ALT1 0x0 +#define VF610_PAD_PTD25__NF_IO9 0x114 0x000 ALT2 0x0 +#define VF610_PAD_PTD25__FTM3_CH6 0x114 0x000 ALT4 0x0 +#define VF610_PAD_PTD25__DEBUG_OUT15 0x114 0x000 ALT7 0x0 +#define VF610_PAD_PTD24__GPIO_70 0x118 0x000 ALT0 0x0 +#define VF610_PAD_PTD24__FB_AD24 0x118 0x000 ALT1 0x0 +#define VF610_PAD_PTD24__NF_IO8 0x118 0x000 ALT2 0x0 +#define VF610_PAD_PTD24__FTM3_CH7 0x118 0x000 ALT4 0x0 +#define VF610_PAD_PTD24__DEBUG_OUT16 0x118 0x000 ALT7 0x0 +#define VF610_PAD_PTD23__GPIO_71 0x11C 0x000 ALT0 0x0 +#define VF610_PAD_PTD23__FB_AD23 0x11C 0x000 ALT1 0x0 +#define VF610_PAD_PTD23__NF_IO7 0x11C 0x000 ALT2 0x0 +#define VF610_PAD_PTD23__FTM2_CH0 0x11C 0x000 ALT3 0x0 +#define VF610_PAD_PTD23__ENET0_1588_TMR0 0x11C 0x304 ALT4 0x1 +#define VF610_PAD_PTD23__ESDHC0_DAT4 0x11C 0x000 ALT5 0x0 +#define VF610_PAD_PTD23__UART2_TX 0x11C 0x38C ALT6 0x1 +#define VF610_PAD_PTD23__DCU1_R3 0x11C 0x000 ALT7 0x0 +#define VF610_PAD_PTD22__GPIO_72 0x120 0x000 ALT0 0x0 +#define VF610_PAD_PTD22__FB_AD22 0x120 0x000 ALT1 0x0 +#define VF610_PAD_PTD22__NF_IO6 0x120 0x000 ALT2 0x0 +#define VF610_PAD_PTD22__FTM2_CH1 0x120 0x000 ALT3 0x0 +#define VF610_PAD_PTD22__ENET0_1588_TMR1 0x120 0x308 ALT4 0x1 +#define VF610_PAD_PTD22__ESDHC0_DAT5 0x120 0x000 ALT5 0x0 +#define VF610_PAD_PTD22__UART2_RX 0x120 0x388 ALT6 0x1 +#define VF610_PAD_PTD22__DCU1_R4 0x120 0x000 ALT7 0x0 +#define VF610_PAD_PTD21__GPIO_73 0x124 0x000 ALT0 0x0 +#define VF610_PAD_PTD21__FB_AD21 0x124 0x000 ALT1 0x0 +#define VF610_PAD_PTD21__NF_IO5 0x124 0x000 ALT2 0x0 +#define VF610_PAD_PTD21__ENET0_1588_TMR2 0x124 0x000 ALT4 0x0 +#define VF610_PAD_PTD21__ESDHC0_DAT6 0x124 0x000 ALT5 0x0 +#define VF610_PAD_PTD21__UART2_RTS 0x124 0x000 ALT6 0x0 +#define VF610_PAD_PTD21__DCU1_R5 0x124 0x000 ALT7 0x0 +#define VF610_PAD_PTD20__GPIO_74 0x128 0x000 ALT0 0x0 +#define VF610_PAD_PTD20__FB_AD20 0x128 0x000 ALT1 0x0 +#define VF610_PAD_PTD20__NF_IO4 0x128 0x000 ALT2 0x0 +#define VF610_PAD_PTD20__ENET0_1588_TMR3 0x128 0x000 ALT4 0x0 +#define VF610_PAD_PTD20__ESDHC0_DAT7 0x128 0x000 ALT5 0x0 +#define VF610_PAD_PTD20__UART2_CTS 0x128 0x384 ALT6 0x0 +#define VF610_PAD_PTD20__DCU1_R0 0x128 0x000 ALT7 0x0 +#define VF610_PAD_PTD19__GPIO_75 0x12C 0x000 ALT0 0x0 +#define VF610_PAD_PTD19__FB_AD19 0x12C 0x000 ALT1 0x0 +#define VF610_PAD_PTD19__NF_IO3 0x12C 0x000 ALT2 0x0 +#define VF610_PAD_PTD19__ESAI_SCKR 0x12C 0x000 ALT3 0x0 +#define VF610_PAD_PTD19__I2C0_SCL 0x12C 0x33C ALT4 0x2 +#define VF610_PAD_PTD19__FTM2_QD_PHA 0x12C 0x000 ALT5 0x0 +#define VF610_PAD_PTD19__DCU1_R1 0x12C 0x000 ALT7 0x0 +#define VF610_PAD_PTD18__GPIO_76 0x130 0x000 ALT0 0x0 +#define VF610_PAD_PTD18__FB_AD18 0x130 0x000 ALT1 0x0 +#define VF610_PAD_PTD18__NF_IO2 0x130 0x000 ALT2 0x0 +#define VF610_PAD_PTD18__ESAI_FSR 0x130 0x000 ALT3 0x0 +#define VF610_PAD_PTD18__I2C0_SDA 0x130 0x340 ALT4 0x2 +#define VF610_PAD_PTD18__FTM2_QD_PHB 0x130 0x000 ALT5 0x0 +#define VF610_PAD_PTD18__DCU1_G0 0x130 0x000 ALT7 0x0 +#define VF610_PAD_PTD17__GPIO_77 0x134 0x000 ALT0 0x0 +#define VF610_PAD_PTD17__FB_AD17 0x134 0x000 ALT1 0x0 +#define VF610_PAD_PTD17__NF_IO1 0x134 0x000 ALT2 0x0 +#define VF610_PAD_PTD17__ESAI_HCKR 0x134 0x000 ALT3 0x0 +#define VF610_PAD_PTD17__I2C1_SCL 0x134 0x344 ALT4 0x2 +#define VF610_PAD_PTD17__DCU1_G1 0x134 0x000 ALT7 0x0 +#define VF610_PAD_PTD16__GPIO_78 0x138 0x000 ALT0 0x0 +#define VF610_PAD_PTD16__FB_AD16 0x138 0x000 ALT1 0x0 +#define VF610_PAD_PTD16__NF_IO0 0x138 0x000 ALT2 0x0 +#define VF610_PAD_PTD16__ESAI_HCKT 0x138 0x000 ALT3 0x0 +#define VF610_PAD_PTD16__I2C1_SDA 0x138 0x348 ALT4 0x2 +#define VF610_PAD_PTD16__DCU1_G2 0x138 0x000 ALT7 0x0 +#define VF610_PAD_PTD0__GPIO_79 0x13C 0x000 ALT0 0x0 +#define VF610_PAD_PTD0__QSPI0_A_QSCK 0x13C 0x000 ALT1 0x0 +#define VF610_PAD_PTD0__UART2_TX 0x13C 0x38C ALT2 0x2 +#define VF610_PAD_PTD0__FB_AD15 0x13C 0x000 ALT4 0x0 +#define VF610_PAD_PTD0__SPDIF_EXTCLK 0x13C 0x000 ALT5 0x0 +#define VF610_PAD_PTD0__DEBUG_OUT17 0x13C 0x000 ALT7 0x0 +#define VF610_PAD_PTD1__GPIO_80 0x140 0x000 ALT0 0x0 +#define VF610_PAD_PTD1__QSPI0_A_CS0 0x140 0x000 ALT1 0x0 +#define VF610_PAD_PTD1__UART2_RX 0x140 0x388 ALT2 0x2 +#define VF610_PAD_PTD1__FB_AD14 0x140 0x000 ALT4 0x0 +#define VF610_PAD_PTD1__SPDIF_IN1 0x140 0x000 ALT5 0x0 +#define VF610_PAD_PTD1__DEBUG_OUT18 0x140 0x000 ALT7 0x0 +#define VF610_PAD_PTD2__GPIO_81 0x144 0x000 ALT0 0x0 +#define VF610_PAD_PTD2__QSPI0_A_DATA3 0x144 0x000 ALT1 0x0 +#define VF610_PAD_PTD2__UART2_RTS 0x144 0x000 ALT2 0x0 +#define VF610_PAD_PTD2__DSPI1_CS3 0x144 0x000 ALT3 0x0 +#define VF610_PAD_PTD2__FB_AD13 0x144 0x000 ALT4 0x0 +#define VF610_PAD_PTD2__SPDIF_OUT1 0x144 0x000 ALT5 0x0 +#define VF610_PAD_PTD2__DEBUG_OUT19 0x144 0x000 ALT7 0x0 +#define VF610_PAD_PTD3__GPIO_82 0x148 0x000 ALT0 0x0 +#define VF610_PAD_PTD3__QSPI0_A_DATA2 0x148 0x000 ALT1 0x0 +#define VF610_PAD_PTD3__UART2_CTS 0x148 0x384 ALT2 0x1 +#define VF610_PAD_PTD3__DSPI1_CS2 0x148 0x000 ALT3 0x0 +#define VF610_PAD_PTD3__FB_AD12 0x148 0x000 ALT4 0x0 +#define VF610_PAD_PTD3__SPDIF_PLOCK 0x148 0x000 ALT5 0x0 +#define VF610_PAD_PTD3__DEBUG_OUT20 0x148 0x000 ALT7 0x0 +#define VF610_PAD_PTD4__GPIO_83 0x14C 0x000 ALT0 0x0 +#define VF610_PAD_PTD4__QSPI0_A_DATA1 0x14C 0x000 ALT1 0x0 +#define VF610_PAD_PTD4__DSPI1_CS1 0x14C 0x000 ALT3 0x0 +#define VF610_PAD_PTD4__FB_AD11 0x14C 0x000 ALT4 0x0 +#define VF610_PAD_PTD4__SPDIF_SRCLK 0x14C 0x000 ALT5 0x0 +#define VF610_PAD_PTD4__DEBUG_OUT21 0x14C 0x000 ALT7 0x0 +#define VF610_PAD_PTD5__GPIO_84 0x150 0x000 ALT0 0x0 +#define VF610_PAD_PTD5__QSPI0_A_DATA0 0x150 0x000 ALT1 0x0 +#define VF610_PAD_PTD5__DSPI1_CS0 0x150 0x300 ALT3 0x1 +#define VF610_PAD_PTD5__FB_AD10 0x150 0x000 ALT4 0x0 +#define VF610_PAD_PTD5__DEBUG_OUT22 0x150 0x000 ALT7 0x0 +#define VF610_PAD_PTD6__GPIO_85 0x154 0x000 ALT0 0x0 +#define VF610_PAD_PTD6__QSPI1_A_DQS 0x154 0x000 ALT1 0x0 +#define VF610_PAD_PTD6__DSPI1_SIN 0x154 0x2FC ALT3 0x1 +#define VF610_PAD_PTD6__FB_AD9 0x154 0x000 ALT4 0x0 +#define VF610_PAD_PTD6__DEBUG_OUT23 0x154 0x000 ALT7 0x0 +#define VF610_PAD_PTD7__GPIO_86 0x158 0x000 ALT0 0x0 +#define VF610_PAD_PTD7__QSPI0_B_QSCK 0x158 0x000 ALT1 0x0 +#define VF610_PAD_PTD7__DSPI1_SOUT 0x158 0x000 ALT3 0x0 +#define VF610_PAD_PTD7__FB_AD8 0x158 0x000 ALT4 0x0 +#define VF610_PAD_PTD7__DEBUG_OUT24 0x158 0x000 ALT7 0x0 +#define VF610_PAD_PTD8__GPIO_87 0x15C 0x000 ALT0 0x0 +#define VF610_PAD_PTD8__QSPI0_B_CS0 0x15C 0x000 ALT1 0x0 +#define VF610_PAD_PTD8__FB_CLKOUT 0x15C 0x000 ALT2 0x0 +#define VF610_PAD_PTD8__DSPI1_SCK 0x15C 0x2F8 ALT3 0x1 +#define VF610_PAD_PTD8__FB_AD7 0x15C 0x000 ALT4 0x0 +#define VF610_PAD_PTD8__DEBUG_OUT25 0x15C 0x000 ALT7 0x0 +#define VF610_PAD_PTD9__GPIO_88 0x160 0x000 ALT0 0x0 +#define VF610_PAD_PTD9__QSPI0_B_DATA3 0x160 0x000 ALT1 0x0 +#define VF610_PAD_PTD9__DSPI3_CS1 0x160 0x000 ALT2 0x0 +#define VF610_PAD_PTD9__FB_AD6 0x160 0x000 ALT4 0x0 +#define VF610_PAD_PTD9__SAI1_TX_SYNC 0x160 0x360 ALT6 0x0 +#define VF610_PAD_PTD9__DCU1_B0 0x160 0x000 ALT7 0x0 +#define VF610_PAD_PTD10__GPIO_89 0x164 0x000 ALT0 0x0 +#define VF610_PAD_PTD10__QSPI0_B_DATA2 0x164 0x000 ALT1 0x0 +#define VF610_PAD_PTD10__DSPI3_CS0 0x164 0x000 ALT2 0x0 +#define VF610_PAD_PTD10__FB_AD5 0x164 0x000 ALT4 0x0 +#define VF610_PAD_PTD10__DCU1_B1 0x164 0x000 ALT7 0x0 +#define VF610_PAD_PTD11__GPIO_90 0x168 0x000 ALT0 0x0 +#define VF610_PAD_PTD11__QSPI0_B_DATA1 0x168 0x000 ALT1 0x0 +#define VF610_PAD_PTD11__DSPI3_SIN 0x168 0x000 ALT2 0x0 +#define VF610_PAD_PTD11__FB_AD4 0x168 0x000 ALT4 0x0 +#define VF610_PAD_PTD11__DEBUG_OUT26 0x168 0x000 ALT7 0x0 +#define VF610_PAD_PTD12__GPIO_91 0x16C 0x000 ALT0 0x0 +#define VF610_PAD_PTD12__QSPI0_B_DATA0 0x16C 0x000 ALT1 0x0 +#define VF610_PAD_PTD12__DSPI3_SOUT 0x16C 0x000 ALT2 0x0 +#define VF610_PAD_PTD12__FB_AD3 0x16C 0x000 ALT4 0x0 +#define VF610_PAD_PTD12__DEBUG_OUT27 0x16C 0x000 ALT7 0x0 +#define VF610_PAD_PTD13__GPIO_92 0x170 0x000 ALT0 0x0 +#define VF610_PAD_PTD13__QSPI0_B_DQS 0x170 0x000 ALT1 0x0 +#define VF610_PAD_PTD13__DSPI3_SCK 0x170 0x000 ALT2 0x0 +#define VF610_PAD_PTD13__FB_AD2 0x170 0x000 ALT4 0x0 +#define VF610_PAD_PTD13__DEBUG_OUT28 0x170 0x000 ALT7 0x0 +#define VF610_PAD_PTB23__GPIO_93 0x174 0x000 ALT0 0x0 +#define VF610_PAD_PTB23__SAI0_TX_BCLK 0x174 0x000 ALT1 0x0 +#define VF610_PAD_PTB23__UART1_TX 0x174 0x380 ALT2 0x2 +#define VF610_PAD_PTB23__SRC_RCON18 0x174 0x398 ALT3 0x1 +#define VF610_PAD_PTB23__FB_MUXED_ALE 0x174 0x000 ALT4 0x0 +#define VF610_PAD_PTB23__FB_TS_B 0x174 0x000 ALT5 0x0 +#define VF610_PAD_PTB23__UART3_RTS 0x174 0x000 ALT6 0x0 +#define VF610_PAD_PTB23__DCU1_G3 0x174 0x000 ALT7 0x0 +#define VF610_PAD_PTB24__GPIO_94 0x178 0x000 ALT0 0x0 +#define VF610_PAD_PTB24__SAI0_RX_BCLK 0x178 0x000 ALT1 0x0 +#define VF610_PAD_PTB24__UART1_RX 0x178 0x37C ALT2 0x2 +#define VF610_PAD_PTB24__SRC_RCON19 0x178 0x39C ALT3 0x1 +#define VF610_PAD_PTB24__FB_MUXED_TSIZ0 0x178 0x000 ALT4 0x0 +#define VF610_PAD_PTB24__NF_WE_B 0x178 0x000 ALT5 0x0 +#define VF610_PAD_PTB24__UART3_CTS 0x178 0x000 ALT6 0x0 +#define VF610_PAD_PTB24__DCU1_G4 0x178 0x000 ALT7 0x0 +#define VF610_PAD_PTB25__GPIO_95 0x17C 0x000 ALT0 0x0 +#define VF610_PAD_PTB25__SAI0_RX_DATA 0x17C 0x000 ALT1 0x0 +#define VF610_PAD_PTB25__UART1_RTS 0x17C 0x000 ALT2 0x0 +#define VF610_PAD_PTB25__SRC_RCON20 0x17C 0x3A0 ALT3 0x1 +#define VF610_PAD_PTB25__FB_CS1_B 0x17C 0x000 ALT4 0x0 +#define VF610_PAD_PTB25__NF_CE0_B 0x17C 0x000 ALT5 0x0 +#define VF610_PAD_PTB25__DCU1_G5 0x17C 0x000 ALT7 0x0 +#define VF610_PAD_PTB26__GPIO_96 0x180 0x000 ALT0 0x0 +#define VF610_PAD_PTB26__SAI0_TX_DATA 0x180 0x000 ALT1 0x0 +#define VF610_PAD_PTB26__UART1_CTS 0x180 0x378 ALT2 0x2 +#define VF610_PAD_PTB26__SRC_RCON21 0x180 0x000 ALT3 0x0 +#define VF610_PAD_PTB26__FB_CS0_B 0x180 0x000 ALT4 0x0 +#define VF610_PAD_PTB26__NF_CE1_B 0x180 0x000 ALT5 0x0 +#define VF610_PAD_PTB26__DCU1_G6 0x180 0x000 ALT7 0x0 +#define VF610_PAD_PTB27__GPIO_97 0x184 0x000 ALT0 0x0 +#define VF610_PAD_PTB27__SAI0_RX_SYNC 0x184 0x000 ALT1 0x0 +#define VF610_PAD_PTB27__SRC_RCON22 0x184 0x000 ALT3 0x0 +#define VF610_PAD_PTB27__FB_OE_B 0x184 0x000 ALT4 0x0 +#define VF610_PAD_PTB27__FB_MUXED_TBST_B 0x184 0x000 ALT5 0x0 +#define VF610_PAD_PTB27__NF_RE_B 0x184 0x000 ALT6 0x0 +#define VF610_PAD_PTB27__DCU1_G7 0x184 0x000 ALT7 0x0 +#define VF610_PAD_PTB28__GPIO_98 0x188 0x000 ALT0 0x0 +#define VF610_PAD_PTB28__SAI0_TX_SYNC 0x188 0x000 ALT1 0x0 +#define VF610_PAD_PTB28__SRC_RCON23 0x188 0x000 ALT3 0x0 +#define VF610_PAD_PTB28__FB_RW_B 0x188 0x000 ALT4 0x0 +#define VF610_PAD_PTB28__DCU1_B6 0x188 0x000 ALT7 0x0 +#define VF610_PAD_PTC26__GPIO_99 0x18C 0x000 ALT0 0x0 +#define VF610_PAD_PTC26__SAI1_TX_BCLK 0x18C 0x000 ALT1 0x0 +#define VF610_PAD_PTC26__DSPI0_CS5 0x18C 0x000 ALT2 0x0 +#define VF610_PAD_PTC26__SRC_RCON24 0x18C 0x000 ALT3 0x0 +#define VF610_PAD_PTC26__FB_TA_B 0x18C 0x000 ALT4 0x0 +#define VF610_PAD_PTC26__NF_RB_B 0x18C 0x000 ALT5 0x0 +#define VF610_PAD_PTC26__DCU1_B7 0x18C 0x000 ALT7 0x0 +#define VF610_PAD_PTC27__GPIO_100 0x190 0x000 ALT0 0x0 +#define VF610_PAD_PTC27__SAI1_RX_BCLK 0x190 0x000 ALT1 0x0 +#define VF610_PAD_PTC27__DSPI0_CS4 0x190 0x000 ALT2 0x0 +#define VF610_PAD_PTC27__SRC_RCON25 0x190 0x000 ALT3 0x0 +#define VF610_PAD_PTC27__FB_BE3_B 0x190 0x000 ALT4 0x0 +#define VF610_PAD_PTC27__FB_CS3_B 0x190 0x000 ALT5 0x0 +#define VF610_PAD_PTC27__NF_ALE 0x190 0x000 ALT6 0x0 +#define VF610_PAD_PTC27__DCU1_B2 0x190 0x000 ALT7 0x0 +#define VF610_PAD_PTC28__GPIO_101 0x194 0x000 ALT0 0x0 +#define VF610_PAD_PTC28__SAI1_RX_DATA 0x194 0x000 ALT1 0x0 +#define VF610_PAD_PTC28__DSPI0_CS3 0x194 0x000 ALT2 0x0 +#define VF610_PAD_PTC28__SRC_RCON26 0x194 0x000 ALT3 0x0 +#define VF610_PAD_PTC28__FB_BE2_B 0x194 0x000 ALT4 0x0 +#define VF610_PAD_PTC28__FB_CS2_B 0x194 0x000 ALT5 0x0 +#define VF610_PAD_PTC28__NF_CLE 0x194 0x000 ALT6 0x0 +#define VF610_PAD_PTC28__DCU1_B3 0x194 0x000 ALT7 0x0 +#define VF610_PAD_PTC29__GPIO_102 0x198 0x000 ALT0 0x0 +#define VF610_PAD_PTC29__SAI1_TX_DATA 0x198 0x000 ALT1 0x0 +#define VF610_PAD_PTC29__DSPI0_CS2 0x198 0x000 ALT2 0x0 +#define VF610_PAD_PTC29__SRC_RCON27 0x198 0x000 ALT3 0x0 +#define VF610_PAD_PTC29__FB_BE1_B 0x198 0x000 ALT4 0x0 +#define VF610_PAD_PTC29__FB_MUXED_TSIZE1 0x198 0x000 ALT5 0x0 +#define VF610_PAD_PTC29__DCU1_B4 0x198 0x000 ALT7 0x0 +#define VF610_PAD_PTC30__GPIO_103 0x19C 0x000 ALT0 0x0 +#define VF610_PAD_PTC30__SAI1_RX_SYNC 0x19C 0x000 ALT1 0x0 +#define VF610_PAD_PTC30__DSPI1_CS2 0x19C 0x000 ALT2 0x0 +#define VF610_PAD_PTC30__SRC_RCON28 0x19C 0x000 ALT3 0x0 +#define VF610_PAD_PTC30__FB_MUXED_BE0_B 0x19C 0x000 ALT4 0x0 +#define VF610_PAD_PTC30__FB_TSIZ0 0x19C 0x000 ALT5 0x0 +#define VF610_PAD_PTC30__ADC0_SE5 0x19C 0x000 ALT6 0x0 +#define VF610_PAD_PTC30__DCU1_B5 0x19C 0x000 ALT7 0x0 +#define VF610_PAD_PTC31__GPIO_104 0x1A0 0x000 ALT0 0x0 +#define VF610_PAD_PTC31__SAI1_TX_SYNC 0x1A0 0x360 ALT1 0x1 +#define VF610_PAD_PTC31__SRC_RCON29 0x1A0 0x000 ALT3 0x0 +#define VF610_PAD_PTC31__ADC1_SE5 0x1A0 0x000 ALT6 0x0 +#define VF610_PAD_PTC31__DCU1_B6 0x1A0 0x000 ALT7 0x0 +#define VF610_PAD_PTE0__GPIO_105 0x1A4 0x000 ALT0 0x0 +#define VF610_PAD_PTE0__DCU0_HSYNC 0x1A4 0x000 ALT1 0x0 +#define VF610_PAD_PTE0__SRC_BMODE1 0x1A4 0x000 ALT2 0x0 +#define VF610_PAD_PTE0__LCD0 0x1A4 0x000 ALT4 0x0 +#define VF610_PAD_PTE0__DEBUG_OUT29 0x1A4 0x000 ALT7 0x0 +#define VF610_PAD_PTE1__GPIO_106 0x1A8 0x000 ALT0 0x0 +#define VF610_PAD_PTE1__DCU0_VSYNC 0x1A8 0x000 ALT1 0x0 +#define VF610_PAD_PTE1__SRC_BMODE0 0x1A8 0x000 ALT2 0x0 +#define VF610_PAD_PTE1__LCD1 0x1A8 0x000 ALT4 0x0 +#define VF610_PAD_PTE1__DEBUG_OUT30 0x1A8 0x000 ALT7 0x0 +#define VF610_PAD_PTE2__GPIO_107 0x1AC 0x000 ALT0 0x0 +#define VF610_PAD_PTE2__DCU0_PCLK 0x1AC 0x000 ALT1 0x0 +#define VF610_PAD_PTE2__LCD2 0x1AC 0x000 ALT4 0x0 +#define VF610_PAD_PTE2__DEBUG_OUT31 0x1AC 0x000 ALT7 0x0 +#define VF610_PAD_PTE3__GPIO_108 0x1B0 0x000 ALT0 0x0 +#define VF610_PAD_PTE3__DCU0_TAG 0x1B0 0x000 ALT1 0x0 +#define VF610_PAD_PTE3__LCD3 0x1B0 0x000 ALT4 0x0 +#define VF610_PAD_PTE3__DEBUG_OUT32 0x1B0 0x000 ALT7 0x0 +#define VF610_PAD_PTE4__GPIO_109 0x1B4 0x000 ALT0 0x0 +#define VF610_PAD_PTE4__DCU0_DE 0x1B4 0x000 ALT1 0x0 +#define VF610_PAD_PTE4__LCD4 0x1B4 0x000 ALT4 0x0 +#define VF610_PAD_PTE4__DEBUG_OUT33 0x1B4 0x000 ALT7 0x0 +#define VF610_PAD_PTE5__GPIO_110 0x1B8 0x000 ALT0 0x0 +#define VF610_PAD_PTE5__DCU0_R0 0x1B8 0x000 ALT1 0x0 +#define VF610_PAD_PTE5__LCD5 0x1B8 0x000 ALT4 0x0 +#define VF610_PAD_PTE5__DEBUG_OUT34 0x1B8 0x000 ALT7 0x0 +#define VF610_PAD_PTE6__GPIO_111 0x1BC 0x000 ALT0 0x0 +#define VF610_PAD_PTE6__DCU0_R1 0x1BC 0x000 ALT1 0x0 +#define VF610_PAD_PTE6__LCD6 0x1BC 0x000 ALT4 0x0 +#define VF610_PAD_PTE6__DEBUG_OUT35 0x1BC 0x000 ALT7 0x0 +#define VF610_PAD_PTE7__GPIO_112 0x1C0 0x000 ALT0 0x0 +#define VF610_PAD_PTE7__DCU0_R2 0x1C0 0x000 ALT1 0x0 +#define VF610_PAD_PTE7__SRC_RCON0 0x1C0 0x000 ALT3 0x0 +#define VF610_PAD_PTE7__LCD7 0x1C0 0x000 ALT4 0x0 +#define VF610_PAD_PTE7__DEBUG_OUT36 0x1C0 0x000 ALT7 0x0 +#define VF610_PAD_PTE8__GPIO_113 0x1C4 0x000 ALT0 0x0 +#define VF610_PAD_PTE8__DCU0_R3 0x1C4 0x000 ALT1 0x0 +#define VF610_PAD_PTE8__SRC_RCON1 0x1C4 0x000 ALT3 0x0 +#define VF610_PAD_PTE8__LCD8 0x1C4 0x000 ALT4 0x0 +#define VF610_PAD_PTE8__DEBUG_OUT37 0x1C4 0x000 ALT7 0x0 +#define VF610_PAD_PTE9__GPIO_114 0x1C8 0x000 ALT0 0x0 +#define VF610_PAD_PTE9__DCU0_R4 0x1C8 0x000 ALT1 0x0 +#define VF610_PAD_PTE9__SRC_RCON2 0x1C8 0x000 ALT3 0x0 +#define VF610_PAD_PTE9__LCD9 0x1C8 0x000 ALT4 0x0 +#define VF610_PAD_PTE9__DEBUG_OUT38 0x1C8 0x000 ALT7 0x0 +#define VF610_PAD_PTE10__GPIO_115 0x1CC 0x000 ALT0 0x0 +#define VF610_PAD_PTE10__DCU0_R5 0x1CC 0x000 ALT1 0x0 +#define VF610_PAD_PTE10__SRC_RCON3 0x1CC 0x000 ALT3 0x0 +#define VF610_PAD_PTE10__LCD10 0x1CC 0x000 ALT4 0x0 +#define VF610_PAD_PTE10__DEBUG_OUT39 0x1CC 0x000 ALT7 0x0 +#define VF610_PAD_PTE11__GPIO_116 0x1D0 0x000 ALT0 0x0 +#define VF610_PAD_PTE11__DCU0_R6 0x1D0 0x000 ALT1 0x0 +#define VF610_PAD_PTE11__SRC_RCON4 0x1D0 0x000 ALT3 0x0 +#define VF610_PAD_PTE11__LCD11 0x1D0 0x000 ALT4 0x0 +#define VF610_PAD_PTE11__DEBUG_OUT40 0x1D0 0x000 ALT7 0x0 +#define VF610_PAD_PTE12__GPIO_117 0x1D4 0x000 ALT0 0x0 +#define VF610_PAD_PTE12__DCU0_R7 0x1D4 0x000 ALT1 0x0 +#define VF610_PAD_PTE12__DSPI1_CS3 0x1D4 0x000 ALT2 0x0 +#define VF610_PAD_PTE12__SRC_RCON5 0x1D4 0x000 ALT3 0x0 +#define VF610_PAD_PTE12__LCD12 0x1D4 0x000 ALT4 0x0 +#define VF610_PAD_PTE12__LPT_ALT0 0x1D4 0x000 ALT7 0x0 +#define VF610_PAD_PTE13__GPIO_118 0x1D8 0x000 ALT0 0x0 +#define VF610_PAD_PTE13__DCU0_G0 0x1D8 0x000 ALT1 0x0 +#define VF610_PAD_PTE13__LCD13 0x1D8 0x000 ALT4 0x0 +#define VF610_PAD_PTE13__DEBUG_OUT41 0x1D8 0x000 ALT7 0x0 +#define VF610_PAD_PTE14__GPIO_119 0x1DC 0x000 ALT0 0x0 +#define VF610_PAD_PTE14__DCU0_G1 0x1DC 0x000 ALT1 0x0 +#define VF610_PAD_PTE14__LCD14 0x1DC 0x000 ALT4 0x0 +#define VF610_PAD_PTE14__DEBUG_OUT42 0x1DC 0x000 ALT7 0x0 +#define VF610_PAD_PTE15__GPIO_120 0x1E0 0x000 ALT0 0x0 +#define VF610_PAD_PTE15__DCU0_G2 0x1E0 0x000 ALT1 0x0 +#define VF610_PAD_PTE15__SRC_RCON6 0x1E0 0x000 ALT3 0x0 +#define VF610_PAD_PTE15__LCD15 0x1E0 0x000 ALT4 0x0 +#define VF610_PAD_PTE15__DEBUG_OUT43 0x1E0 0x000 ALT7 0x0 +#define VF610_PAD_PTE16__GPIO_121 0x1E4 0x000 ALT0 0x0 +#define VF610_PAD_PTE16__DCU0_G3 0x1E4 0x000 ALT1 0x0 +#define VF610_PAD_PTE16__SRC_RCON7 0x1E4 0x000 ALT3 0x0 +#define VF610_PAD_PTE16__LCD16 0x1E4 0x000 ALT4 0x0 +#define VF610_PAD_PTE17__GPIO_122 0x1E8 0x000 ALT0 0x0 +#define VF610_PAD_PTE17__DCU0_G4 0x1E8 0x000 ALT1 0x0 +#define VF610_PAD_PTE17__SRC_RCON8 0x1E8 0x000 ALT3 0x0 +#define VF610_PAD_PTE17__LCD17 0x1E8 0x000 ALT4 0x0 +#define VF610_PAD_PTE18__GPIO_123 0x1EC 0x000 ALT0 0x0 +#define VF610_PAD_PTE18__DCU0_G5 0x1EC 0x000 ALT1 0x0 +#define VF610_PAD_PTE18__SRC_RCON9 0x1EC 0x000 ALT3 0x0 +#define VF610_PAD_PTE18__LCD18 0x1EC 0x000 ALT4 0x0 +#define VF610_PAD_PTE19__GPIO_124 0x1F0 0x000 ALT0 0x0 +#define VF610_PAD_PTE19__DCU0_G6 0x1F0 0x000 ALT1 0x0 +#define VF610_PAD_PTE19__SRC_RCON10 0x1F0 0x000 ALT3 0x0 +#define VF610_PAD_PTE19__LCD19 0x1F0 0x000 ALT4 0x0 +#define VF610_PAD_PTE19__I2C0_SCL 0x1F0 0x33C ALT5 0x3 +#define VF610_PAD_PTE20__GPIO_125 0x1F4 0x000 ALT0 0x0 +#define VF610_PAD_PTE20__DCU0_G7 0x1F4 0x000 ALT1 0x0 +#define VF610_PAD_PTE20__SRC_RCON11 0x1F4 0x000 ALT3 0x0 +#define VF610_PAD_PTE20__LCD20 0x1F4 0x000 ALT4 0x0 +#define VF610_PAD_PTE20__I2C0_SDA 0x1F4 0x340 ALT5 0x3 +#define VF610_PAD_PTE20__EWM_IN 0x1F4 0x000 ALT7 0x0 +#define VF610_PAD_PTE21__GPIO_126 0x1F8 0x000 ALT0 0x0 +#define VF610_PAD_PTE21__DCU0_B0 0x1F8 0x000 ALT1 0x0 +#define VF610_PAD_PTE21__LCD21 0x1F8 0x000 ALT4 0x0 +#define VF610_PAD_PTE22__GPIO_127 0x1FC 0x000 ALT0 0x0 +#define VF610_PAD_PTE22__DCU0_B1 0x1FC 0x000 ALT1 0x0 +#define VF610_PAD_PTE22__LCD22 0x1FC 0x000 ALT4 0x0 +#define VF610_PAD_PTE23__GPIO_128 0x200 0x000 ALT0 0x0 +#define VF610_PAD_PTE23__DCU0_B2 0x200 0x000 ALT1 0x0 +#define VF610_PAD_PTE23__SRC_RCON12 0x200 0x000 ALT3 0x0 +#define VF610_PAD_PTE23__LCD23 0x200 0x000 ALT4 0x0 +#define VF610_PAD_PTE24__GPIO_129 0x204 0x000 ALT0 0x0 +#define VF610_PAD_PTE24__DCU0_B3 0x204 0x000 ALT1 0x0 +#define VF610_PAD_PTE24__SRC_RCON13 0x204 0x000 ALT3 0x0 +#define VF610_PAD_PTE24__LCD24 0x204 0x000 ALT4 0x0 +#define VF610_PAD_PTE25__GPIO_130 0x208 0x000 ALT0 0x0 +#define VF610_PAD_PTE25__DCU0_B4 0x208 0x000 ALT1 0x0 +#define VF610_PAD_PTE25__SRC_RCON14 0x208 0x000 ALT3 0x0 +#define VF610_PAD_PTE25__LCD25 0x208 0x000 ALT4 0x0 +#define VF610_PAD_PTE26__GPIO_131 0x20C 0x000 ALT0 0x0 +#define VF610_PAD_PTE26__DCU0_B5 0x20C 0x000 ALT1 0x0 +#define VF610_PAD_PTE26__SRC_RCON15 0x20C 0x000 ALT3 0x0 +#define VF610_PAD_PTE26__LCD26 0x20C 0x000 ALT4 0x0 +#define VF610_PAD_PTE27__GPIO_132 0x210 0x000 ALT0 0x0 +#define VF610_PAD_PTE27__DCU0_B6 0x210 0x000 ALT1 0x0 +#define VF610_PAD_PTE27__SRC_RCON16 0x210 0x000 ALT3 0x0 +#define VF610_PAD_PTE27__LCD27 0x210 0x000 ALT4 0x0 +#define VF610_PAD_PTE27__I2C1_SCL 0x210 0x344 ALT5 0x3 +#define VF610_PAD_PTE28__GPIO_133 0x214 0x000 ALT0 0x0 +#define VF610_PAD_PTE28__DCU0_B7 0x214 0x000 ALT1 0x0 +#define VF610_PAD_PTE28__SRC_RCON17 0x214 0x000 ALT3 0x0 +#define VF610_PAD_PTE28__LCD28 0x214 0x000 ALT4 0x0 +#define VF610_PAD_PTE28__I2C1_SDA 0x214 0x348 ALT5 0x3 +#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0 +#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0 +#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1 + +#endif diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 2af79659d2..667badbc06 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -24,7 +24,7 @@ #define MXC_CPU_MX6QP 0x69 #define MXC_CPU_MX7S 0x71 /* dummy ID */ #define MXC_CPU_MX7D 0x72 -#define MXC_CPU_MX8MQ 0x82 +#define MXC_CPU_IMX8MQ 0x82 #define MXC_CPU_IMX8QXP_A0 0x90 /* dummy ID */ #define MXC_CPU_IMX8QXP 0x92 /* dummy ID */ #define MXC_CPU_MX7ULP 0xE1 /* Temporally hard code */ @@ -32,7 +32,7 @@ #define MXC_SOC_MX6 0x60 #define MXC_SOC_MX7 0x70 -#define MXC_SOC_MX8M 0x80 +#define MXC_SOC_IMX8M 0x80 #define MXC_SOC_IMX8 0x90 /* dummy */ #define MXC_SOC_MX7ULP 0xE0 /* dummy */ @@ -41,6 +41,7 @@ #define CHIP_REV_1_2 0x12 #define CHIP_REV_1_5 0x15 #define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_1 0x21 #define CHIP_REV_2_5 0x25 #define CHIP_REV_3_0 0x30 diff --git a/arch/arm/include/asm/arch-mx8m/clock.h b/arch/arm/include/asm/arch-imx8m/clock.h index 45cfea3018..e7c1670f6b 100644 --- a/arch/arm/include/asm/arch-mx8m/clock.h +++ b/arch/arm/include/asm/arch-imx8m/clock.h @@ -10,6 +10,8 @@ #include <linux/bitops.h> +#define MHZ(X) ((X) * 1000000UL) + enum pll_clocks { ANATOP_ARM_PLL, ANATOP_GPU_PLL, @@ -631,6 +633,26 @@ enum frac_pll_out_val { FRAC_PLL_OUT_1600M, }; +#define DRAM_BYPASS_ROOT_CONFIG(_rate, _m, _p, _s, _k) \ + { \ + .clk = (_rate), \ + .alt_root_sel = (_m), \ + .alt_pre_div = (_p), \ + .apb_root_sel = (_s), \ + .apb_pre_div = (_k), \ + } + +struct dram_bypass_clk_setting { + ulong clk; + int alt_root_sel; + enum root_pre_div alt_pre_div; + int apb_root_sel; + enum root_pre_div apb_pre_div; +}; + +void dram_pll_init(ulong pll_val); +void dram_enable_bypass(ulong clk_val); +void dram_disable_bypass(void); u32 imx_get_fecclk(void); u32 imx_get_uartclk(void); int clock_init(void); diff --git a/arch/arm/include/asm/arch-mx8m/crm_regs.h b/arch/arm/include/asm/arch-imx8m/crm_regs.h index c128931289..c42e6685de 100644 --- a/arch/arm/include/asm/arch-mx8m/crm_regs.h +++ b/arch/arm/include/asm/arch-imx8m/crm_regs.h @@ -3,7 +3,7 @@ * Copyright 2017 NXP */ -#ifndef _ASM_ARCH_MX8M_CRM_REGS_H -#define _ASM_ARCH_MX8M_CRM_REGS_H +#ifndef _ASM_ARCH_IMX8M_CRM_REGS_H +#define _ASM_ARCH_IMX8M_CRM_REGS_H /* Dummy header, some imx-common code needs this file */ #endif diff --git a/arch/arm/include/asm/arch-imx8m/ddr.h b/arch/arm/include/asm/arch-imx8m/ddr.h new file mode 100644 index 0000000000..53d46256d8 --- /dev/null +++ b/arch/arm/include/asm/arch-imx8m/ddr.h @@ -0,0 +1,740 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017 NXP + */ + +#ifndef __ASM_ARCH_IMX8M_DDR_H +#define __ASM_ARCH_IMX8M_DDR_H + +#include <asm/io.h> +#include <asm/types.h> +#include <asm/arch/ddr.h> + +#define DDRC_DDR_SS_GPR0 0x3d000000 +#define DDRC_IPS_BASE_ADDR_0 0x3f400000 +#define IP2APB_DDRPHY_IPS_BASE_ADDR(X) (0x3c000000 + (X * 0x2000000)) +#define DDRPHY_MEM(X) (0x3c000000 + (X * 0x2000000) + 0x50000) + +struct ddrc_freq { + u32 res0[8]; + u32 derateen; + u32 derateint; + u32 res1[10]; + u32 rfshctl0; + u32 res2[4]; + u32 rfshtmg; + u32 rfshtmg1; + u32 res3[28]; + u32 init3; + u32 init4; + u32 res; + u32 init6; + u32 init7; + u32 res4[4]; + u32 dramtmg0; + u32 dramtmg1; + u32 dramtmg2; + u32 dramtmg3; + u32 dramtmg4; + u32 dramtmg5; + u32 dramtmg6; + u32 dramtmg7; + u32 dramtmg8; + u32 dramtmg9; + u32 dramtmg10; + u32 dramtmg11; + u32 dramtmg12; + u32 dramtmg13; + u32 dramtmg14; + u32 dramtmg15; + u32 dramtmg16; + u32 dramtmg17; + u32 res5[10]; + u32 mramtmg0; + u32 mramtmg1; + u32 mramtmg4; + u32 mramtmg9; + u32 zqctl0; + u32 res6[3]; + u32 dfitmg0; + u32 dfitmg1; + u32 res7[7]; + u32 dfitmg2; + u32 dfitmg3; + u32 res8[33]; + u32 odtcfg; +}; + +struct imx8m_ddrc_regs { + u32 mstr; + u32 stat; + u32 mstr1; + u32 res1; + u32 mrctrl0; + u32 mrctrl1; + u32 mrstat; + u32 mrctrl2; + u32 derateen; + u32 derateint; + u32 mstr2; + u32 res2; + u32 pwrctl; + u32 pwrtmg; + u32 hwlpctl; + u32 hwffcctl; + u32 hwffcstat; + u32 res3[3]; + u32 rfshctl0; + u32 rfshctl1; + u32 rfshctl2; + u32 rfshctl4; + u32 rfshctl3; + u32 rfshtmg; + u32 rfshtmg1; + u32 res4; + u32 ecccfg0; + u32 ecccfg1; + u32 eccstat; + u32 eccclr; + u32 eccerrcnt; + u32 ecccaddr0; + u32 ecccaddr1; + u32 ecccsyn0; + u32 ecccsyn1; + u32 ecccsyn2; + u32 eccbitmask0; + u32 eccbitmask1; + u32 eccbitmask2; + u32 eccuaddr0; + u32 eccuaddr1; + u32 eccusyn0; + u32 eccusyn1; + u32 eccusyn2; + u32 eccpoisonaddr0; + u32 eccpoisonaddr1; + u32 crcparctl0; + u32 crcparctl1; + u32 crcparctl2; + u32 crcparstat; + u32 init0; + u32 init1; + u32 init2; + u32 init3; + u32 init4; + u32 init5; + u32 init6; + u32 init7; + u32 dimmctl; + u32 rankctl; + u32 res5; + u32 chctl; + u32 dramtmg0; + u32 dramtmg1; + u32 dramtmg2; + u32 dramtmg3; + u32 dramtmg4; + u32 dramtmg5; + u32 dramtmg6; + u32 dramtmg7; + u32 dramtmg8; + u32 dramtmg9; + u32 dramtmg10; + u32 dramtmg11; + u32 dramtmg12; + u32 dramtmg13; + u32 dramtmg14; + u32 dramtmg15; + u32 dramtmg16; + u32 dramtmg17; + u32 res6[10]; + u32 mramtmg0; + u32 mramtmg1; + u32 mramtmg4; + u32 mramtmg9; + u32 zqctl0; + u32 zqctl1; + u32 zqctl2; + u32 zqstat; + u32 dfitmg0; + u32 dfitmg1; + u32 dfilpcfg0; + u32 dfilpcfg1; + u32 dfiupd0; + u32 dfiupd1; + u32 dfiupd2; + u32 res7; + u32 dfimisc; + u32 dfitmg2; + u32 dfitmg3; + u32 dfistat; + u32 dbictl; + u32 dfiphymstr; + u32 res8[14]; + u32 addrmap0; + u32 addrmap1; + u32 addrmap2; + u32 addrmap3; + u32 addrmap4; + u32 addrmap5; + u32 addrmap6; + u32 addrmap7; + u32 addrmap8; + u32 addrmap9; + u32 addrmap10; + u32 addrmap11; + u32 res9[4]; + u32 odtcfg; + u32 odtmap; + u32 res10[2]; + u32 sched; + u32 sched1; + u32 sched2; + u32 perfhpr1; + u32 res11; + u32 perflpr1; + u32 res12; + u32 perfwr1; + u32 res13[4]; + u32 dqmap0; + u32 dqmap1; + u32 dqmap2; + u32 dqmap3; + u32 dqmap4; + u32 dqmap5; + u32 res14[26]; + u32 dbg0; + u32 dbg1; + u32 dbgcam; + u32 dbgcmd; + u32 dbgstat; + u32 res15[3]; + u32 swctl; + u32 swstat; + u32 res16[2]; + u32 ocparcfg0; + u32 ocparcfg1; + u32 ocparcfg2; + u32 ocparcfg3; + u32 ocparstat0; + u32 ocparstat1; + u32 ocparwlog0; + u32 ocparwlog1; + u32 ocparwlog2; + u32 ocparawlog0; + u32 ocparawlog1; + u32 ocparrlog0; + u32 ocparrlog1; + u32 ocpararlog0; + u32 ocpararlog1; + u32 poisoncfg; + u32 poisonstat; + u32 adveccindex; + union { + u32 adveccstat; + u32 eccapstat; + }; + u32 eccpoisonpat0; + u32 eccpoisonpat1; + u32 eccpoisonpat2; + u32 res17[6]; + u32 caparpoisonctl; + u32 caparpoisonstat; + u32 res18[2]; + u32 dynbsmstat; + u32 res19[18]; + u32 pstat; + u32 pccfg; + struct { + u32 pcfgr; + u32 pcfgw; + u32 pcfgc; + struct { + u32 pcfgidmaskch0; + u32 pcfidvaluech0; + } pcfgid[16]; + u32 pctrl; + u32 pcfgqos0; + u32 pcfgqos1; + u32 pcfgwqos0; + u32 pcfgwqos1; + u32 res[4]; + } pcfg[16]; + struct { + u32 sarbase; + u32 sarsize; + } sar[4]; + u32 sbrctl; + u32 sbrstat; + u32 sbrwdata0; + u32 sbrwdata1; + u32 pdch; + u32 res20[755]; + /* umctl2_regs_dch1 */ + u32 ch1_stat; + u32 res21[2]; + u32 ch1_mrctrl0; + u32 ch1_mrctrl1; + u32 ch1_mrstat; + u32 ch1_mrctrl2; + u32 res22[4]; + u32 ch1_pwrctl; + u32 ch1_pwrtmg; + u32 ch1_hwlpctl; + u32 res23[15]; + u32 ch1_eccstat; + u32 ch1_eccclr; + u32 ch1_eccerrcnt; + u32 ch1_ecccaddr0; + u32 ch1_ecccaddr1; + u32 ch1_ecccsyn0; + u32 ch1_ecccsyn1; + u32 ch1_ecccsyn2; + u32 ch1_eccbitmask0; + u32 ch1_eccbitmask1; + u32 ch1_eccbitmask2; + u32 ch1_eccuaddr0; + u32 ch1_eccuaddr1; + u32 ch1_eccusyn0; + u32 ch1_eccusyn1; + u32 ch1_eccusyn2; + u32 res24[2]; + u32 ch1_crcparctl0; + u32 res25[2]; + u32 ch1_crcparstat; + u32 res26[46]; + u32 ch1_zqctl2; + u32 ch1_zqstat; + u32 res27[11]; + u32 ch1_dfistat; + u32 res28[33]; + u32 ch1_odtmap; + u32 res29[47]; + u32 ch1_dbg1; + u32 ch1_dbgcam; + u32 ch1_dbgcmd; + u32 ch1_dbgstat; + u32 res30[123]; + /* umctl2_regs_freq1 */ + struct ddrc_freq freq1; + u32 res31[109]; + /* umctl2_regs_addrmap_alt */ + u32 addrmap0_alt; + u32 addrmap1_alt; + u32 addrmap2_alt; + u32 addrmap3_alt; + u32 addrmap4_alt; + u32 addrmap5_alt; + u32 addrmap6_alt; + u32 addrmap7_alt; + u32 addrmap8_alt; + u32 addrmap9_alt; + u32 addrmap10_alt; + u32 addrmap11_alt; + u32 res32[758]; + /* umctl2_regs_freq2 */ + struct ddrc_freq freq2; + u32 res33[879]; + /* umctl2_regs_freq3 */ + struct ddrc_freq freq3; +}; + +struct imx8m_ddrphy_regs { + u32 reg[0xf0000]; +}; + +/* PHY State */ +enum pstate { + PS0, + PS1, + PS2, + PS3, +}; + +enum msg_response { + TRAIN_SUCCESS = 0x7, + TRAIN_STREAM_START = 0x8, + TRAIN_FAIL = 0xff, +}; + +#define DDRC_MSTR(X) (DDRC_IPS_BASE_ADDR(X) + 0x00) +#define DDRC_STAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x04) +#define DDRC_MSTR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x08) +#define DDRC_MRCTRL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x10) +#define DDRC_MRCTRL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x14) +#define DDRC_MRSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x18) +#define DDRC_MRCTRL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1c) +#define DDRC_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x20) +#define DDRC_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x24) +#define DDRC_MSTR2(X) (DDRC_IPS_BASE_ADDR(X) + 0x28) +#define DDRC_PWRCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x30) +#define DDRC_PWRTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x34) +#define DDRC_HWLPCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x38) +#define DDRC_HWFFCCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x3c) +#define DDRC_HWFFCSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x40) +#define DDRC_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x50) +#define DDRC_RFSHCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x54) +#define DDRC_RFSHCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x58) +#define DDRC_RFSHCTL3(X) (DDRC_IPS_BASE_ADDR(X) + 0x60) +#define DDRC_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x64) +#define DDRC_ECCCFG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x70) +#define DDRC_ECCCFG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x74) +#define DDRC_ECCSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x78) +#define DDRC_ECCCLR(X) (DDRC_IPS_BASE_ADDR(X) + 0x7c) +#define DDRC_ECCERRCNT(X) (DDRC_IPS_BASE_ADDR(X) + 0x80) +#define DDRC_ECCCADDR0(X) (DDRC_IPS_BASE_ADDR(X) + 0x84) +#define DDRC_ECCCADDR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x88) +#define DDRC_ECCCSYN0(X) (DDRC_IPS_BASE_ADDR(X) + 0x8c) +#define DDRC_ECCCSYN1(X) (DDRC_IPS_BASE_ADDR(X) + 0x90) +#define DDRC_ECCCSYN2(X) (DDRC_IPS_BASE_ADDR(X) + 0x94) +#define DDRC_ECCBITMASK0(X) (DDRC_IPS_BASE_ADDR(X) + 0x98) +#define DDRC_ECCBITMASK1(X) (DDRC_IPS_BASE_ADDR(X) + 0x9c) +#define DDRC_ECCBITMASK2(X) (DDRC_IPS_BASE_ADDR(X) + 0xa0) +#define DDRC_ECCUADDR0(X) (DDRC_IPS_BASE_ADDR(X) + 0xa4) +#define DDRC_ECCUADDR1(X) (DDRC_IPS_BASE_ADDR(X) + 0xa8) +#define DDRC_ECCUSYN0(X) (DDRC_IPS_BASE_ADDR(X) + 0xac) +#define DDRC_ECCUSYN1(X) (DDRC_IPS_BASE_ADDR(X) + 0xb0) +#define DDRC_ECCUSYN2(X) (DDRC_IPS_BASE_ADDR(X) + 0xb4) +#define DDRC_ECCPOISONADDR0(X) (DDRC_IPS_BASE_ADDR(X) + 0xb8) +#define DDRC_ECCPOISONADDR1(X) (DDRC_IPS_BASE_ADDR(X) + 0xbc) +#define DDRC_CRCPARCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0xc0) +#define DDRC_CRCPARCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0xc4) +#define DDRC_CRCPARCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0xc8) +#define DDRC_CRCPARSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0xcc) +#define DDRC_INIT0(X) (DDRC_IPS_BASE_ADDR(X) + 0xd0) +#define DDRC_INIT1(X) (DDRC_IPS_BASE_ADDR(X) + 0xd4) +#define DDRC_INIT2(X) (DDRC_IPS_BASE_ADDR(X) + 0xd8) +#define DDRC_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0xdc) +#define DDRC_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0xe0) +#define DDRC_INIT5(X) (DDRC_IPS_BASE_ADDR(X) + 0xe4) +#define DDRC_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0xe8) +#define DDRC_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0xec) +#define DDRC_DIMMCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0xf0) +#define DDRC_RANKCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0xf4) +#define DDRC_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x100) +#define DDRC_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x104) +#define DDRC_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x108) +#define DDRC_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x10c) +#define DDRC_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x110) +#define DDRC_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x114) +#define DDRC_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x118) +#define DDRC_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x11c) +#define DDRC_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x120) +#define DDRC_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x124) +#define DDRC_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x128) +#define DDRC_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x12c) +#define DDRC_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x130) +#define DDRC_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x134) +#define DDRC_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x138) +#define DDRC_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x13C) +#define DDRC_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x140) +#define DDRC_DRAMTMG17(X) (DDRC_IPS_BASE_ADDR(X) + 0x144) +#define DDRC_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x180) +#define DDRC_ZQCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x184) +#define DDRC_ZQCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x188) +#define DDRC_ZQSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x18c) +#define DDRC_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x190) +#define DDRC_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x194) +#define DDRC_DFILPCFG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x198) +#define DDRC_DFILPCFG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x19c) +#define DDRC_DFIUPD0(X) (DDRC_IPS_BASE_ADDR(X) + 0x1a0) +#define DDRC_DFIUPD1(X) (DDRC_IPS_BASE_ADDR(X) + 0x1a4) +#define DDRC_DFIUPD2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1a8) +#define DDRC_DFIMISC(X) (DDRC_IPS_BASE_ADDR(X) + 0x1b0) +#define DDRC_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1b4) +#define DDRC_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x1b8) +#define DDRC_DFISTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x1bc) +#define DDRC_DBICTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x1c0) +#define DDRC_DFIPHYMSTR(X) (DDRC_IPS_BASE_ADDR(X) + 0x1c4) +#define DDRC_TRAINCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x1d0) +#define DDRC_TRAINCTL1(X) (DDRC_IPS_BASE_ADDR(X) + 0x1d4) +#define DDRC_TRAINCTL2(X) (DDRC_IPS_BASE_ADDR(X) + 0x1d8) +#define DDRC_TRAINSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x1dc) +#define DDRC_ADDRMAP0(X) (DDRC_IPS_BASE_ADDR(X) + 0x200) +#define DDRC_ADDRMAP1(X) (DDRC_IPS_BASE_ADDR(X) + 0x204) +#define DDRC_ADDRMAP2(X) (DDRC_IPS_BASE_ADDR(X) + 0x208) +#define DDRC_ADDRMAP3(X) (DDRC_IPS_BASE_ADDR(X) + 0x20c) +#define DDRC_ADDRMAP4(X) (DDRC_IPS_BASE_ADDR(X) + 0x210) +#define DDRC_ADDRMAP5(X) (DDRC_IPS_BASE_ADDR(X) + 0x214) +#define DDRC_ADDRMAP6(X) (DDRC_IPS_BASE_ADDR(X) + 0x218) +#define DDRC_ADDRMAP7(X) (DDRC_IPS_BASE_ADDR(X) + 0x21c) +#define DDRC_ADDRMAP8(X) (DDRC_IPS_BASE_ADDR(X) + 0x220) +#define DDRC_ADDRMAP9(X) (DDRC_IPS_BASE_ADDR(X) + 0x224) +#define DDRC_ADDRMAP10(X) (DDRC_IPS_BASE_ADDR(X) + 0x228) +#define DDRC_ADDRMAP11(X) (DDRC_IPS_BASE_ADDR(X) + 0x22c) +#define DDRC_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x240) +#define DDRC_ODTMAP(X) (DDRC_IPS_BASE_ADDR(X) + 0x244) +#define DDRC_SCHED(X) (DDRC_IPS_BASE_ADDR(X) + 0x250) +#define DDRC_SCHED1(X) (DDRC_IPS_BASE_ADDR(X) + 0x254) +#define DDRC_PERFHPR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x25c) +#define DDRC_PERFLPR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x264) +#define DDRC_PERFWR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x26c) +#define DDRC_PERFVPR1(X) (DDRC_IPS_BASE_ADDR(X) + 0x274) +#define DDRC_PERFVPW1(X) (DDRC_IPS_BASE_ADDR(X) + 0x278) +#define DDRC_DQMAP0(X) (DDRC_IPS_BASE_ADDR(X) + 0x280) +#define DDRC_DQMAP1(X) (DDRC_IPS_BASE_ADDR(X) + 0x284) +#define DDRC_DQMAP2(X) (DDRC_IPS_BASE_ADDR(X) + 0x288) +#define DDRC_DQMAP3(X) (DDRC_IPS_BASE_ADDR(X) + 0x28c) +#define DDRC_DQMAP4(X) (DDRC_IPS_BASE_ADDR(X) + 0x290) +#define DDRC_DQMAP5(X) (DDRC_IPS_BASE_ADDR(X) + 0x294) +#define DDRC_DBG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x300) +#define DDRC_DBG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x304) +#define DDRC_DBGCAM(X) (DDRC_IPS_BASE_ADDR(X) + 0x308) +#define DDRC_DBGCMD(X) (DDRC_IPS_BASE_ADDR(X) + 0x30c) +#define DDRC_DBGSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x310) +#define DDRC_SWCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0x320) +#define DDRC_SWSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x324) +#define DDRC_OCPARCFG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x330) +#define DDRC_OCPARCFG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x334) +#define DDRC_OCPARCFG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x338) +#define DDRC_OCPARCFG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x33c) +#define DDRC_OCPARSTAT0(X) (DDRC_IPS_BASE_ADDR(X) + 0x340) +#define DDRC_OCPARSTAT1(X) (DDRC_IPS_BASE_ADDR(X) + 0x344) +#define DDRC_OCPARWLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x348) +#define DDRC_OCPARWLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x34c) +#define DDRC_OCPARWLOG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x350) +#define DDRC_OCPARAWLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x354) +#define DDRC_OCPARAWLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x358) +#define DDRC_OCPARRLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x35c) +#define DDRC_OCPARRLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x360) +#define DDRC_OCPARARLOG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x364) +#define DDRC_OCPARARLOG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x368) +#define DDRC_POISONCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x36C) +#define DDRC_POISONSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x370) + +#define DDRC_PSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0x3fc) +#define DDRC_PCCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x400) +#define DDRC_PCFGR_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x404) +#define DDRC_PCFGR_1(X) (DDRC_IPS_BASE_ADDR(X) + 1 * 0xb0 + 0x404) +#define DDRC_PCFGR_2(X) (DDRC_IPS_BASE_ADDR(X) + 2 * 0xb0 + 0x404) +#define DDRC_PCFGR_3(X) (DDRC_IPS_BASE_ADDR(X) + 3 * 0xb0 + 0x404) +#define DDRC_PCFGW_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x408) +#define DDRC_PCFGW_1(X) (DDRC_IPS_BASE_ADDR(X) + 1 * 0xb0 + 0x408) +#define DDRC_PCFGW_2(X) (DDRC_IPS_BASE_ADDR(X) + 2 * 0xb0 + 0x408) +#define DDRC_PCFGW_3(X) (DDRC_IPS_BASE_ADDR(X) + 3 * 0xb0 + 0x408) +#define DDRC_PCFGC_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x40c) +#define DDRC_PCFGIDMASKCH(X) (DDRC_IPS_BASE_ADDR(X) + 0x410) +#define DDRC_PCFGIDVALUECH(X) (DDRC_IPS_BASE_ADDR(X) + 0x414) +#define DDRC_PCTRL_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x490) +#define DDRC_PCTRL_1(X) (DDRC_IPS_BASE_ADDR(X) + 0x490 + 1 * 0xb0) +#define DDRC_PCTRL_2(X) (DDRC_IPS_BASE_ADDR(X) + 0x490 + 2 * 0xb0) +#define DDRC_PCTRL_3(X) (DDRC_IPS_BASE_ADDR(X) + 0x490 + 3 * 0xb0) +#define DDRC_PCFGQOS0_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x494) +#define DDRC_PCFGQOS1_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x498) +#define DDRC_PCFGWQOS0_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x49c) +#define DDRC_PCFGWQOS1_0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4a0) +#define DDRC_SARBASE0(X) (DDRC_IPS_BASE_ADDR(X) + 0xf04) +#define DDRC_SARSIZE0(X) (DDRC_IPS_BASE_ADDR(X) + 0xf08) +#define DDRC_SBRCTL(X) (DDRC_IPS_BASE_ADDR(X) + 0xf24) +#define DDRC_SBRSTAT(X) (DDRC_IPS_BASE_ADDR(X) + 0xf28) +#define DDRC_SBRWDATA0(X) (DDRC_IPS_BASE_ADDR(X) + 0xf2c) +#define DDRC_SBRWDATA1(X) (DDRC_IPS_BASE_ADDR(X) + 0xf30) +#define DDRC_PDCH(X) (DDRC_IPS_BASE_ADDR(X) + 0xf34) + +#define DDRC_FREQ1_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x2020) +#define DDRC_FREQ1_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x2024) +#define DDRC_FREQ1_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2050) +#define DDRC_FREQ1_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x2064) +#define DDRC_FREQ1_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0x20dc) +#define DDRC_FREQ1_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0x20e0) +#define DDRC_FREQ1_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0x20e8) +#define DDRC_FREQ1_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0x20ec) +#define DDRC_FREQ1_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2100) +#define DDRC_FREQ1_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x2104) +#define DDRC_FREQ1_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x2108) +#define DDRC_FREQ1_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x210c) +#define DDRC_FREQ1_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x2110) +#define DDRC_FREQ1_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x2114) +#define DDRC_FREQ1_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x2118) +#define DDRC_FREQ1_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x211c) +#define DDRC_FREQ1_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x2120) +#define DDRC_FREQ1_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x2124) +#define DDRC_FREQ1_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x2128) +#define DDRC_FREQ1_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x212c) +#define DDRC_FREQ1_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x2130) +#define DDRC_FREQ1_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x2134) +#define DDRC_FREQ1_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x2138) +#define DDRC_FREQ1_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x213C) +#define DDRC_FREQ1_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x2140) +#define DDRC_FREQ1_DRAMTMG17(X) (DDRC_IPS_BASE_ADDR(X) + 0x2144) +#define DDRC_FREQ1_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2180) +#define DDRC_FREQ1_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x2190) +#define DDRC_FREQ1_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x2194) +#define DDRC_FREQ1_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b4) +#define DDRC_FREQ1_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b8) +#define DDRC_FREQ1_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x2240) + +#define DDRC_FREQ2_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x3020) +#define DDRC_FREQ2_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x3024) +#define DDRC_FREQ2_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3050) +#define DDRC_FREQ2_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x3064) +#define DDRC_FREQ2_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0x30dc) +#define DDRC_FREQ2_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0x30e0) +#define DDRC_FREQ2_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0x30e8) +#define DDRC_FREQ2_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0x30ec) +#define DDRC_FREQ2_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3100) +#define DDRC_FREQ2_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x3104) +#define DDRC_FREQ2_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x3108) +#define DDRC_FREQ2_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x310c) +#define DDRC_FREQ2_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x3110) +#define DDRC_FREQ2_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x3114) +#define DDRC_FREQ2_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x3118) +#define DDRC_FREQ2_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x311c) +#define DDRC_FREQ2_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x3120) +#define DDRC_FREQ2_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x3124) +#define DDRC_FREQ2_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x3128) +#define DDRC_FREQ2_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x312c) +#define DDRC_FREQ2_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x3130) +#define DDRC_FREQ2_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x3134) +#define DDRC_FREQ2_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x3138) +#define DDRC_FREQ2_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x313C) +#define DDRC_FREQ2_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x3140) +#define DDRC_FREQ2_DRAMTMG17(X) (DDRC_IPS_BASE_ADDR(X) + 0x3144) +#define DDRC_FREQ2_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3180) +#define DDRC_FREQ2_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x3190) +#define DDRC_FREQ2_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x3194) +#define DDRC_FREQ2_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x31b4) +#define DDRC_FREQ2_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x31b8) +#define DDRC_FREQ2_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x3240) + +#define DDRC_FREQ3_DERATEEN(X) (DDRC_IPS_BASE_ADDR(X) + 0x4020) +#define DDRC_FREQ3_DERATEINT(X) (DDRC_IPS_BASE_ADDR(X) + 0x4024) +#define DDRC_FREQ3_RFSHCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4050) +#define DDRC_FREQ3_RFSHTMG(X) (DDRC_IPS_BASE_ADDR(X) + 0x4064) +#define DDRC_FREQ3_INIT3(X) (DDRC_IPS_BASE_ADDR(X) + 0x40dc) +#define DDRC_FREQ3_INIT4(X) (DDRC_IPS_BASE_ADDR(X) + 0x40e0) +#define DDRC_FREQ3_INIT6(X) (DDRC_IPS_BASE_ADDR(X) + 0x40e8) +#define DDRC_FREQ3_INIT7(X) (DDRC_IPS_BASE_ADDR(X) + 0x40ec) +#define DDRC_FREQ3_DRAMTMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4100) +#define DDRC_FREQ3_DRAMTMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x4104) +#define DDRC_FREQ3_DRAMTMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x4108) +#define DDRC_FREQ3_DRAMTMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x410c) +#define DDRC_FREQ3_DRAMTMG4(X) (DDRC_IPS_BASE_ADDR(X) + 0x4110) +#define DDRC_FREQ3_DRAMTMG5(X) (DDRC_IPS_BASE_ADDR(X) + 0x4114) +#define DDRC_FREQ3_DRAMTMG6(X) (DDRC_IPS_BASE_ADDR(X) + 0x4118) +#define DDRC_FREQ3_DRAMTMG7(X) (DDRC_IPS_BASE_ADDR(X) + 0x411c) +#define DDRC_FREQ3_DRAMTMG8(X) (DDRC_IPS_BASE_ADDR(X) + 0x4120) +#define DDRC_FREQ3_DRAMTMG9(X) (DDRC_IPS_BASE_ADDR(X) + 0x4124) +#define DDRC_FREQ3_DRAMTMG10(X) (DDRC_IPS_BASE_ADDR(X) + 0x4128) +#define DDRC_FREQ3_DRAMTMG11(X) (DDRC_IPS_BASE_ADDR(X) + 0x412c) +#define DDRC_FREQ3_DRAMTMG12(X) (DDRC_IPS_BASE_ADDR(X) + 0x4130) +#define DDRC_FREQ3_DRAMTMG13(X) (DDRC_IPS_BASE_ADDR(X) + 0x4134) +#define DDRC_FREQ3_DRAMTMG14(X) (DDRC_IPS_BASE_ADDR(X) + 0x4138) +#define DDRC_FREQ3_DRAMTMG15(X) (DDRC_IPS_BASE_ADDR(X) + 0x413C) +#define DDRC_FREQ3_DRAMTMG16(X) (DDRC_IPS_BASE_ADDR(X) + 0x4140) + +#define DDRC_FREQ3_ZQCTL0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4180) +#define DDRC_FREQ3_DFITMG0(X) (DDRC_IPS_BASE_ADDR(X) + 0x4190) +#define DDRC_FREQ3_DFITMG1(X) (DDRC_IPS_BASE_ADDR(X) + 0x4194) +#define DDRC_FREQ3_DFITMG2(X) (DDRC_IPS_BASE_ADDR(X) + 0x41b4) +#define DDRC_FREQ3_DFITMG3(X) (DDRC_IPS_BASE_ADDR(X) + 0x41b8) +#define DDRC_FREQ3_ODTCFG(X) (DDRC_IPS_BASE_ADDR(X) + 0x4240) +#define DDRC_DFITMG0_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2190) +#define DDRC_DFITMG1_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2194) +#define DDRC_DFITMG2_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b4) +#define DDRC_DFITMG3_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x21b8) +#define DDRC_ODTCFG_SHADOW(X) (DDRC_IPS_BASE_ADDR(X) + 0x2240) + +#define DDRPHY_CalBusy(X) (IP2APB_DDRPHY_IPS_BASE_ADDR(X) + 4 * 0x020097) + +#define DRC_PERF_MON_BASE_ADDR(X) (0x3d800000 + ((X) * 0x2000000)) +#define DRC_PERF_MON_CNT0_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x0) +#define DRC_PERF_MON_CNT1_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x4) +#define DRC_PERF_MON_CNT2_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x8) +#define DRC_PERF_MON_CNT3_CTL(X) (DRC_PERF_MON_BASE_ADDR(X) + 0xC) +#define DRC_PERF_MON_CNT0_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x20) +#define DRC_PERF_MON_CNT1_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x24) +#define DRC_PERF_MON_CNT2_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x28) +#define DRC_PERF_MON_CNT3_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x2C) +#define DRC_PERF_MON_MRR0_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x40) +#define DRC_PERF_MON_MRR1_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x44) +#define DRC_PERF_MON_MRR2_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x48) +#define DRC_PERF_MON_MRR3_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x4C) +#define DRC_PERF_MON_MRR4_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x50) +#define DRC_PERF_MON_MRR5_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x54) +#define DRC_PERF_MON_MRR6_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x58) +#define DRC_PERF_MON_MRR7_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x5C) +#define DRC_PERF_MON_MRR8_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x60) +#define DRC_PERF_MON_MRR9_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x64) +#define DRC_PERF_MON_MRR10_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x68) +#define DRC_PERF_MON_MRR11_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x6C) +#define DRC_PERF_MON_MRR12_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x70) +#define DRC_PERF_MON_MRR13_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x74) +#define DRC_PERF_MON_MRR14_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x78) +#define DRC_PERF_MON_MRR15_DAT(X) (DRC_PERF_MON_BASE_ADDR(X) + 0x7C) + +/* user data type */ +enum fw_type { + FW_1D_IMAGE, + FW_2D_IMAGE, +}; + +struct dram_cfg_param { + unsigned int reg; + unsigned int val; +}; + +struct dram_fsp_msg { + unsigned int drate; + enum fw_type fw_type; + struct dram_cfg_param *fsp_cfg; + unsigned int fsp_cfg_num; +}; + +struct dram_timing_info { + /* umctl2 config */ + struct dram_cfg_param *ddrc_cfg; + unsigned int ddrc_cfg_num; + /* ddrphy config */ + struct dram_cfg_param *ddrphy_cfg; + unsigned int ddrphy_cfg_num; + /* ddr fsp train info */ + struct dram_fsp_msg *fsp_msg; + unsigned int fsp_msg_num; + /* ddr phy trained CSR */ + struct dram_cfg_param *ddrphy_trained_csr; + unsigned int ddrphy_trained_csr_num; + /* ddr phy PIE */ + struct dram_cfg_param *ddrphy_pie; + unsigned int ddrphy_pie_num; + /* initialized drate table */ + unsigned int fsp_table[4]; +}; + +extern struct dram_timing_info dram_timing; + +void ddr_load_train_firmware(enum fw_type type); +void ddr_init(struct dram_timing_info *timing_info); +void ddr_cfg_phy(struct dram_timing_info *timing_info); +void load_lpddr4_phy_pie(void); +void ddrphy_trained_csr_save(struct dram_cfg_param *param, unsigned int num); +void dram_config_save(struct dram_timing_info *info, unsigned long base); + +/* utils function for ddr phy training */ +void wait_ddrphy_training_complete(void); +void ddrphy_init_set_dfi_clk(unsigned int drate); +void ddrphy_init_read_msg_block(enum fw_type type); + +static inline void reg32_write(unsigned long addr, u32 val) +{ + writel(val, addr); +} + +static inline u32 reg32_read(unsigned long addr) +{ + return readl(addr); +} + +static inline void reg32setbit(unsigned long addr, u32 bit) +{ + setbits_le32(addr, (1 << bit)); +} + +#define dwc_ddrphy_apb_wr(addr, data) \ + reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * (addr), data) +#define dwc_ddrphy_apb_rd(addr) \ + reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * (addr)) + +extern struct dram_cfg_param ddrphy_trained_csr[]; +extern uint32_t ddrphy_trained_csr_num; + +#endif diff --git a/arch/arm/include/asm/arch-mx8m/gpio.h b/arch/arm/include/asm/arch-imx8m/gpio.h index 2ba5643d05..2d9fbcb0e4 100644 --- a/arch/arm/include/asm/arch-mx8m/gpio.h +++ b/arch/arm/include/asm/arch-imx8m/gpio.h @@ -3,8 +3,8 @@ * Copyright 2017 NXP */ -#ifndef __ASM_ARCH_MX8M_GPIO_H -#define __ASM_ARCH_MX8M_GPIO_H +#ifndef __ASM_ARCH_IMX8M_GPIO_H +#define __ASM_ARCH_IMX8M_GPIO_H #include <asm/mach-imx/gpio.h> diff --git a/arch/arm/include/asm/arch-mx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index a3b06282b0..3facd5450c 100644 --- a/arch/arm/include/asm/arch-mx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -3,8 +3,8 @@ * Copyright 2017 NXP */ -#ifndef __ASM_ARCH_MX8M_REGS_H__ -#define __ASM_ARCH_MX8M_REGS_H__ +#ifndef __ASM_ARCH_IMX8M_REGS_H__ +#define __ASM_ARCH_IMX8M_REGS_H__ #include <asm/mach-imx/regs-lcdif.h> diff --git a/arch/arm/include/asm/arch-mx8m/mx8mq_pins.h b/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h index 3ba4d15a2a..c71913f209 100644 --- a/arch/arm/include/asm/arch-mx8m/mx8mq_pins.h +++ b/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h @@ -3,8 +3,8 @@ * Copyright (C) 2017 NXP */ -#ifndef __ASM_ARCH_MX8MQ_PINS_H__ -#define __ASM_ARCH_MX8MQ_PINS_H__ +#ifndef __ASM_ARCH_IMX8MQ_PINS_H__ +#define __ASM_ARCH_IMX8MQ_PINS_H__ #include <asm/mach-imx/iomux-v3.h> diff --git a/arch/arm/include/asm/arch-imx8m/lpddr4_define.h b/arch/arm/include/asm/arch-imx8m/lpddr4_define.h new file mode 100644 index 0000000000..caf5bafb6d --- /dev/null +++ b/arch/arm/include/asm/arch-imx8m/lpddr4_define.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __LPDDR4_DEFINE_H_ +#define __LPDDR4_DEFINE_H_ + +#define LPDDR4_DVFS_DBI +#define DDR_ONE_RANK +/* #define LPDDR4_DBI_ON */ +#define DFI_BUG_WR +#define M845S_4GBx2 +#define PRETRAIN + +/* DRAM MR setting */ +#ifdef LPDDR4_DBI_ON +#define LPDDR4_MR3 0xf1 +#define LPDDR4_PHY_DMIPinPresent 0x1 +#else +#define LPDDR4_MR3 0x31 +#define LPDDR4_PHY_DMIPinPresent 0x0 +#endif + +#ifdef DDR_ONE_RANK +#define LPDDR4_CS 0x1 +#else +#define LPDDR4_CS 0x3 +#endif + +/* PHY training feature */ +#define LPDDR4_HDT_CTL_2D 0xC8 +#define LPDDR4_HDT_CTL_3200_1D 0xC8 +#define LPDDR4_HDT_CTL_400_1D 0xC8 +#define LPDDR4_HDT_CTL_100_1D 0xC8 + +/* 400/100 training seq */ +#define LPDDR4_TRAIN_SEQ_P2 0x121f +#define LPDDR4_TRAIN_SEQ_P1 0x121f +#define LPDDR4_TRAIN_SEQ_P0 0x121f +#define LPDDR4_TRAIN_SEQ_100 0x121f +#define LPDDR4_TRAIN_SEQ_400 0x121f + +/* 2D share & weight */ +#define LPDDR4_2D_WEIGHT 0x1f7f +#define LPDDR4_2D_SHARE 1 +#define LPDDR4_CATRAIN_3200_1d 0 +#define LPDDR4_CATRAIN_400 0 +#define LPDDR4_CATRAIN_100 0 +#define LPDDR4_CATRAIN_3200_2d 0 + +/* MRS parameter */ +/* for LPDDR4 Rtt */ +#define LPDDR4_RTT40 6 +#define LPDDR4_RTT48 5 +#define LPDDR4_RTT60 4 +#define LPDDR4_RTT80 3 +#define LPDDR4_RTT120 2 +#define LPDDR4_RTT240 1 +#define LPDDR4_RTT_DIS 0 + +/* for LPDDR4 Ron */ +#define LPDDR4_RON34 7 +#define LPDDR4_RON40 6 +#define LPDDR4_RON48 5 +#define LPDDR4_RON60 4 +#define LPDDR4_RON80 3 + +#define LPDDR4_PHY_ADDR_RON60 0x1 +#define LPDDR4_PHY_ADDR_RON40 0x3 +#define LPDDR4_PHY_ADDR_RON30 0x7 +#define LPDDR4_PHY_ADDR_RON24 0xf +#define LPDDR4_PHY_ADDR_RON20 0x1f + +/* for read channel */ +#define LPDDR4_RON LPDDR4_RON40 +#define LPDDR4_PHY_RTT 30 +#define LPDDR4_PHY_VREF_VALUE 17 + +/* for write channel */ +#define LPDDR4_PHY_RON 30 +#define LPDDR4_PHY_ADDR_RON LPDDR4_PHY_ADDR_RON40 +#define LPDDR4_RTT_DQ LPDDR4_RTT40 +#define LPDDR4_RTT_CA LPDDR4_RTT40 +#define LPDDR4_RTT_CA_BANK0 LPDDR4_RTT40 +#define LPDDR4_RTT_CA_BANK1 LPDDR4_RTT40 +#define LPDDR4_VREF_VALUE_CA ((1 << 6) | (0xd)) +#define LPDDR4_VREF_VALUE_DQ_RANK0 ((1 << 6) | (0xd)) +#define LPDDR4_VREF_VALUE_DQ_RANK1 ((1 << 6) | (0xd)) +#define LPDDR4_MR22_RANK0 ((0 << 5) | (1 << 4) | (0 << 3) | \ + (LPDDR4_RTT40)) +#define LPDDR4_MR22_RANK1 ((1 << 5) | (1 << 4) | (1 << 3) | \ + (LPDDR4_RTT40)) + +#define LPDDR4_MR3_PU_CAL 1 + +#endif /* __LPDDR4_DEFINE_H__ */ diff --git a/arch/arm/include/asm/arch-mx8m/sys_proto.h b/arch/arm/include/asm/arch-imx8m/sys_proto.h index 01d6cd76c1..d328542ece 100644 --- a/arch/arm/include/asm/arch-mx8m/sys_proto.h +++ b/arch/arm/include/asm/arch-imx8m/sys_proto.h @@ -3,8 +3,8 @@ * Copyright (C) 2017 NXP */ -#ifndef __ARCH_MX8M_SYS_PROTO_H -#define __ARCH_MX8M_SYS_PROTO_H +#ifndef __ARCH_IMX8M_SYS_PROTO_H +#define __ARCH_NMX8M_SYS_PROTO_H #include <asm/mach-imx/sys_proto.h> diff --git a/arch/arm/include/asm/arch-mx8m/ddr.h b/arch/arm/include/asm/arch-mx8m/ddr.h deleted file mode 100644 index 7e4f6fbb64..0000000000 --- a/arch/arm/include/asm/arch-mx8m/ddr.h +++ /dev/null @@ -1,355 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2017 NXP - */ - -#ifndef __ASM_ARCH_MX8M_DDR_H -#define __ASM_ARCH_MX8M_DDR_H - -#define DDRC_DDR_SS_GPR0 0x3d000000 -#define DDRC_IPS_BASE_ADDR_0 0x3f400000 -#define IP2APB_DDRPHY_IPS_BASE_ADDR(X) (0x3c000000 + (X * 0x2000000)) -#define DDRPHY_MEM(X) (0x3c000000 + (X * 0x2000000) + 0x50000) - -struct ddrc_freq { - u32 res0[8]; - u32 derateen; - u32 derateint; - u32 res1[10]; - u32 rfshctl0; - u32 res2[4]; - u32 rfshtmg; - u32 rfshtmg1; - u32 res3[28]; - u32 init3; - u32 init4; - u32 res; - u32 init6; - u32 init7; - u32 res4[4]; - u32 dramtmg0; - u32 dramtmg1; - u32 dramtmg2; - u32 dramtmg3; - u32 dramtmg4; - u32 dramtmg5; - u32 dramtmg6; - u32 dramtmg7; - u32 dramtmg8; - u32 dramtmg9; - u32 dramtmg10; - u32 dramtmg11; - u32 dramtmg12; - u32 dramtmg13; - u32 dramtmg14; - u32 dramtmg15; - u32 dramtmg16; - u32 dramtmg17; - u32 res5[10]; - u32 mramtmg0; - u32 mramtmg1; - u32 mramtmg4; - u32 mramtmg9; - u32 zqctl0; - u32 res6[3]; - u32 dfitmg0; - u32 dfitmg1; - u32 res7[7]; - u32 dfitmg2; - u32 dfitmg3; - u32 res8[33]; - u32 odtcfg; -}; - -struct imx8m_ddrc_regs { - u32 mstr; - u32 stat; - u32 mstr1; - u32 res1; - u32 mrctrl0; - u32 mrctrl1; - u32 mrstat; - u32 mrctrl2; - u32 derateen; - u32 derateint; - u32 mstr2; - u32 res2; - u32 pwrctl; - u32 pwrtmg; - u32 hwlpctl; - u32 hwffcctl; - u32 hwffcstat; - u32 res3[3]; - u32 rfshctl0; - u32 rfshctl1; - u32 rfshctl2; - u32 rfshctl4; - u32 rfshctl3; - u32 rfshtmg; - u32 rfshtmg1; - u32 res4; - u32 ecccfg0; - u32 ecccfg1; - u32 eccstat; - u32 eccclr; - u32 eccerrcnt; - u32 ecccaddr0; - u32 ecccaddr1; - u32 ecccsyn0; - u32 ecccsyn1; - u32 ecccsyn2; - u32 eccbitmask0; - u32 eccbitmask1; - u32 eccbitmask2; - u32 eccuaddr0; - u32 eccuaddr1; - u32 eccusyn0; - u32 eccusyn1; - u32 eccusyn2; - u32 eccpoisonaddr0; - u32 eccpoisonaddr1; - u32 crcparctl0; - u32 crcparctl1; - u32 crcparctl2; - u32 crcparstat; - u32 init0; - u32 init1; - u32 init2; - u32 init3; - u32 init4; - u32 init5; - u32 init6; - u32 init7; - u32 dimmctl; - u32 rankctl; - u32 res5; - u32 chctl; - u32 dramtmg0; - u32 dramtmg1; - u32 dramtmg2; - u32 dramtmg3; - u32 dramtmg4; - u32 dramtmg5; - u32 dramtmg6; - u32 dramtmg7; - u32 dramtmg8; - u32 dramtmg9; - u32 dramtmg10; - u32 dramtmg11; - u32 dramtmg12; - u32 dramtmg13; - u32 dramtmg14; - u32 dramtmg15; - u32 dramtmg16; - u32 dramtmg17; - u32 res6[10]; - u32 mramtmg0; - u32 mramtmg1; - u32 mramtmg4; - u32 mramtmg9; - u32 zqctl0; - u32 zqctl1; - u32 zqctl2; - u32 zqstat; - u32 dfitmg0; - u32 dfitmg1; - u32 dfilpcfg0; - u32 dfilpcfg1; - u32 dfiupd0; - u32 dfiupd1; - u32 dfiupd2; - u32 res7; - u32 dfimisc; - u32 dfitmg2; - u32 dfitmg3; - u32 dfistat; - u32 dbictl; - u32 dfiphymstr; - u32 res8[14]; - u32 addrmap0; - u32 addrmap1; - u32 addrmap2; - u32 addrmap3; - u32 addrmap4; - u32 addrmap5; - u32 addrmap6; - u32 addrmap7; - u32 addrmap8; - u32 addrmap9; - u32 addrmap10; - u32 addrmap11; - u32 res9[4]; - u32 odtcfg; - u32 odtmap; - u32 res10[2]; - u32 sched; - u32 sched1; - u32 sched2; - u32 perfhpr1; - u32 res11; - u32 perflpr1; - u32 res12; - u32 perfwr1; - u32 res13[4]; - u32 dqmap0; - u32 dqmap1; - u32 dqmap2; - u32 dqmap3; - u32 dqmap4; - u32 dqmap5; - u32 res14[26]; - u32 dbg0; - u32 dbg1; - u32 dbgcam; - u32 dbgcmd; - u32 dbgstat; - u32 res15[3]; - u32 swctl; - u32 swstat; - u32 res16[2]; - u32 ocparcfg0; - u32 ocparcfg1; - u32 ocparcfg2; - u32 ocparcfg3; - u32 ocparstat0; - u32 ocparstat1; - u32 ocparwlog0; - u32 ocparwlog1; - u32 ocparwlog2; - u32 ocparawlog0; - u32 ocparawlog1; - u32 ocparrlog0; - u32 ocparrlog1; - u32 ocpararlog0; - u32 ocpararlog1; - u32 poisoncfg; - u32 poisonstat; - u32 adveccindex; - union { - u32 adveccstat; - u32 eccapstat; - }; - u32 eccpoisonpat0; - u32 eccpoisonpat1; - u32 eccpoisonpat2; - u32 res17[6]; - u32 caparpoisonctl; - u32 caparpoisonstat; - u32 res18[2]; - u32 dynbsmstat; - u32 res19[18]; - u32 pstat; - u32 pccfg; - struct { - u32 pcfgr; - u32 pcfgw; - u32 pcfgc; - struct { - u32 pcfgidmaskch0; - u32 pcfidvaluech0; - } pcfgid[16]; - u32 pctrl; - u32 pcfgqos0; - u32 pcfgqos1; - u32 pcfgwqos0; - u32 pcfgwqos1; - u32 res[4]; - } pcfg[16]; - struct { - u32 sarbase; - u32 sarsize; - } sar[4]; - u32 sbrctl; - u32 sbrstat; - u32 sbrwdata0; - u32 sbrwdata1; - u32 pdch; - u32 res20[755]; - /* umctl2_regs_dch1 */ - u32 ch1_stat; - u32 res21[2]; - u32 ch1_mrctrl0; - u32 ch1_mrctrl1; - u32 ch1_mrstat; - u32 ch1_mrctrl2; - u32 res22[4]; - u32 ch1_pwrctl; - u32 ch1_pwrtmg; - u32 ch1_hwlpctl; - u32 res23[15]; - u32 ch1_eccstat; - u32 ch1_eccclr; - u32 ch1_eccerrcnt; - u32 ch1_ecccaddr0; - u32 ch1_ecccaddr1; - u32 ch1_ecccsyn0; - u32 ch1_ecccsyn1; - u32 ch1_ecccsyn2; - u32 ch1_eccbitmask0; - u32 ch1_eccbitmask1; - u32 ch1_eccbitmask2; - u32 ch1_eccuaddr0; - u32 ch1_eccuaddr1; - u32 ch1_eccusyn0; - u32 ch1_eccusyn1; - u32 ch1_eccusyn2; - u32 res24[2]; - u32 ch1_crcparctl0; - u32 res25[2]; - u32 ch1_crcparstat; - u32 res26[46]; - u32 ch1_zqctl2; - u32 ch1_zqstat; - u32 res27[11]; - u32 ch1_dfistat; - u32 res28[33]; - u32 ch1_odtmap; - u32 res29[47]; - u32 ch1_dbg1; - u32 ch1_dbgcam; - u32 ch1_dbgcmd; - u32 ch1_dbgstat; - u32 res30[123]; - /* umctl2_regs_freq1 */ - struct ddrc_freq freq1; - u32 res31[109]; - /* umctl2_regs_addrmap_alt */ - u32 addrmap0_alt; - u32 addrmap1_alt; - u32 addrmap2_alt; - u32 addrmap3_alt; - u32 addrmap4_alt; - u32 addrmap5_alt; - u32 addrmap6_alt; - u32 addrmap7_alt; - u32 addrmap8_alt; - u32 addrmap9_alt; - u32 addrmap10_alt; - u32 addrmap11_alt; - u32 res32[758]; - /* umctl2_regs_freq2 */ - struct ddrc_freq freq2; - u32 res33[879]; - /* umctl2_regs_freq3 */ - struct ddrc_freq freq3; -}; - -struct imx8m_ddrphy_regs { - u32 reg[0xf0000]; -}; - -/* PHY State */ -enum pstate { - PS0, - PS1, - PS2, - PS3, -}; - -enum msg_response { - TRAIN_SUCCESS = 0x7, - TRAIN_STREAM_START = 0x8, - TRAIN_FAIL = 0xff, -}; - -#endif diff --git a/arch/arm/include/asm/mach-imx/iomux-v3.h b/arch/arm/include/asm/mach-imx/iomux-v3.h index 63f4b33aeb..b899a4ff6f 100644 --- a/arch/arm/include/asm/mach-imx/iomux-v3.h +++ b/arch/arm/include/asm/mach-imx/iomux-v3.h @@ -86,7 +86,7 @@ typedef u64 iomux_v3_cfg_t; #define IOMUX_CONFIG_LPSR 0x20 #define MUX_MODE_LPSR ((iomux_v3_cfg_t)IOMUX_CONFIG_LPSR << \ MUX_MODE_SHIFT) -#ifdef CONFIG_MX8M +#ifdef CONFIG_IMX8M #define PAD_CTL_DSE0 (0x0 << 0) #define PAD_CTL_DSE1 (0x1 << 0) #define PAD_CTL_DSE2 (0x2 << 0) diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h index d294c90646..b4c430a35c 100644 --- a/arch/arm/include/asm/mach-imx/regs-lcdif.h +++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h @@ -22,7 +22,7 @@ struct mxs_lcdif_regs { defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ - defined(CONFIG_MX8M) + defined(CONFIG_IMX8M) mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ #endif mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */ @@ -61,7 +61,7 @@ struct mxs_lcdif_regs { defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ - defined(CONFIG_MX8M) + defined(CONFIG_IMX8M) mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ #endif mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */ @@ -73,7 +73,7 @@ struct mxs_lcdif_regs { defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ - defined(CONFIG_MX8M) + defined(CONFIG_IMX8M) mxs_reg_32(hw_lcdif_thres) mxs_reg_32(hw_lcdif_as_ctrl) mxs_reg_32(hw_lcdif_as_buf) diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index f8890b57da..8d6832a331 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -26,7 +26,7 @@ #define is_mx6() (is_soc_type(MXC_SOC_MX6)) #define is_mx7() (is_soc_type(MXC_SOC_MX7)) -#define is_mx8m() (is_soc_type(MXC_SOC_MX8M)) +#define is_imx8m() (is_soc_type(MXC_SOC_IMX8M)) #define is_imx8() (is_soc_type(MXC_SOC_IMX8)) #define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) @@ -42,6 +42,7 @@ #define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP)) +#define is_imx8mq() (is_cpu_type(MXC_CPU_IMX8MQ)) #define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP)) #ifdef CONFIG_MX6 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 53d9e5f42b..d236e40510 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -5,12 +5,14 @@ # # (C) Copyright 2011 Freescale Semiconductor, Inc. -ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 mx8m vf610)) +ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 mx7 imx8m vf610)) obj-y = iomux-v3.o endif -ifeq ($(SOC),$(filter $(SOC),mx8m)) +ifeq ($(SOC),$(filter $(SOC),imx8m)) +ifneq ($(CONFIG_SPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o +endif obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o obj-$(CONFIG_FEC_MXC) += mac.o obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o @@ -22,7 +24,7 @@ obj-y += cpu.o speed.o obj-$(CONFIG_GPT_TIMER) += timer.o obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o endif -ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs mx8m)) +ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m)) obj-y += misc.o obj-$(CONFIG_SPL_BUILD) += spl.o endif @@ -104,7 +106,11 @@ IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%) ifeq ($(CONFIG_ARCH_IMX8), y) CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh IMAGE_TYPE := imx8image -DEPFILE_EXISTS := $(shell if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) +DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) +else ifeq ($(CONFIG_ARCH_IMX8M), y) +IMAGE_TYPE := imx8mimage +IMX8M_DEPFILES := $(srctree)/tools/imx8m_image.sh +DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG);if [ -f spl/u-boot-spl.cfgout ]; then $(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 0; echo $$?; fi) else IMAGE_TYPE := imximage DEPFILE_EXISTS := 0 @@ -129,6 +135,26 @@ ifeq ($(DEPFILE_EXISTS),0) endif endif +ifdef CONFIG_ARM64 +ifeq ($(CONFIG_ARCH_IMX8M), y) +SPL: + +MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout \ + -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE) +flash.bin: MKIMAGEOUTPUT = flash.log + +spl/u-boot-spl-ddr.bin: spl/u-boot-spl.bin spl/u-boot-spl.cfgout FORCE +ifeq ($(DEPFILE_EXISTS),0) + $(IMX8M_DEPFILES) spl/u-boot-spl.cfgout 1 +endif + +flash.bin: spl/u-boot-spl-ddr.bin u-boot.itb FORCE +ifeq ($(DEPFILE_EXISTS),0) + $(call if_changed,mkimage) +endif +endif + +else MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE) SPL: MKIMAGEOUTPUT = SPL.log @@ -160,6 +186,7 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \ spl/u-boot-nand-spl.imx: SPL FORCE $(call if_changed,u-boot-nand-spl_imx) +endif targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx) @@ -169,5 +196,5 @@ obj-$(CONFIG_MX5) += mx5/ obj-$(CONFIG_MX6) += mx6/ obj-$(CONFIG_MX7) += mx7/ obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/ -obj-$(CONFIG_MX8M) += mx8m/ +obj-$(CONFIG_IMX8M) += imx8m/ obj-$(CONFIG_ARCH_IMX8) += imx8/ diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index dcdaced991..80d9ff48a4 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -62,7 +62,7 @@ static char *get_reset_cause(void) return "WDOG4"; case 0x00200: return "TEMPSENSE"; -#elif defined(CONFIG_MX8M) +#elif defined(CONFIG_IMX8M) case 0x00100: return "WDOG2"; case 0x00200: @@ -142,8 +142,8 @@ unsigned imx_ddr_size(void) const char *get_imx_type(u32 imxtype) { switch (imxtype) { - case MXC_CPU_MX8MQ: - return "8MQ"; /* Quad-core version of the mx8m */ + case MXC_CPU_IMX8MQ: + return "8MQ"; /* Quad-core version of the imx8m */ case MXC_CPU_MX7S: return "7S"; /* Single-core version of the mx7 */ case MXC_CPU_MX7D: @@ -266,7 +266,7 @@ int cpu_mmc_init(bd_t *bis) } #endif -#if !(defined(CONFIG_MX7) || defined(CONFIG_MX8M)) +#if !(defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) u32 get_ahb_clk(void) { struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; @@ -300,7 +300,7 @@ void arch_preboot_os(void) #endif } -#ifndef CONFIG_MX8M +#ifndef CONFIG_IMX8M void set_chipselect_size(int const cs_size) { unsigned int reg; @@ -333,7 +333,7 @@ void set_chipselect_size(int const cs_size) } #endif -#if defined(CONFIG_MX7) || defined(CONFIG_MX8M) +#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M) /* * OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440) * defines a 2-bit SPEED_GRADING @@ -409,7 +409,7 @@ u32 get_cpu_temp_grade(int *minc, int *maxc) } #endif -#if defined(CONFIG_MX7) || defined(CONFIG_MX8M) +#if defined(CONFIG_MX7) || defined(CONFIG_IMX8M) enum boot_device get_boot_device(void) { struct bootrom_sw_info **p = @@ -438,7 +438,7 @@ enum boot_device get_boot_device(void) case BOOT_TYPE_SPINOR: boot_dev = SPI_NOR_BOOT; break; -#ifdef CONFIG_MX8M +#ifdef CONFIG_IMX8M case BOOT_TYPE_USB: boot_dev = USB_BOOT; break; diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index b88acd13da..dbfd692fa3 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -6,6 +6,8 @@ #include <common.h> #include <config.h> #include <fuse.h> +#include <mapmem.h> +#include <image.h> #include <asm/io.h> #include <asm/system.h> #include <asm/arch/clock.h> @@ -302,18 +304,41 @@ static int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, return 0; } +static ulong get_image_ivt_offset(ulong img_addr) +{ + const void *buf; + + buf = map_sysmem(img_addr, 0); + switch (genimg_get_format(buf)) { +#if defined(CONFIG_IMAGE_FORMAT_LEGACY) + case IMAGE_FORMAT_LEGACY: + return (image_get_image_size((image_header_t *)img_addr) + + 0x1000 - 1) & ~(0x1000 - 1); +#endif +#if IMAGE_ENABLE_FIT + case IMAGE_FORMAT_FIT: + return (fit_get_size(buf) + 0x1000 - 1) & ~(0x1000 - 1); +#endif + default: + return 0; + } +} + static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, length, ivt_offset; int rcode = 0; - if (argc < 4) + if (argc < 3) return CMD_RET_USAGE; addr = simple_strtoul(argv[1], NULL, 16); length = simple_strtoul(argv[2], NULL, 16); - ivt_offset = simple_strtoul(argv[3], NULL, 16); + if (argc == 3) + ivt_offset = get_image_ivt_offset(addr); + else + ivt_offset = simple_strtoul(argv[3], NULL, 16); rcode = imx_hab_authenticate_image(addr, length, ivt_offset); if (rcode == 0) diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig new file mode 100644 index 0000000000..317dee9bc1 --- /dev/null +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -0,0 +1,23 @@ +if ARCH_IMX8M + +config IMX8M + bool + select ROM_UNIFIED_SECTIONS + +config SYS_SOC + default "imx8m" + +choice + prompt "NXP i.MX8M board select" + optional + +config TARGET_IMX8MQ_EVK + bool "imx8mq_evk" + select IMX8M + select IMX8M_LPDDR4 + +endchoice + +source "board/freescale/imx8mq_evk/Kconfig" + +endif diff --git a/arch/arm/mach-imx/mx8m/Makefile b/arch/arm/mach-imx/imx8m/Makefile index feff4941c1..feff4941c1 100644 --- a/arch/arm/mach-imx/mx8m/Makefile +++ b/arch/arm/mach-imx/imx8m/Makefile diff --git a/arch/arm/mach-imx/mx8m/clock.c b/arch/arm/mach-imx/imx8m/clock.c index fe32e1c3f1..3766d988ba 100644 --- a/arch/arm/mach-imx/mx8m/clock.c +++ b/arch/arm/mach-imx/imx8m/clock.c @@ -525,41 +525,127 @@ u32 imx_get_fecclk(void) return get_root_clk(ENET_AXI_CLK_ROOT); } -#ifdef CONFIG_SPL_BUILD -void dram_pll_init(void) +static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = { + DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2, + CLK_ROOT_PRE_DIV2), + DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2, + CLK_ROOT_PRE_DIV2), + DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3, + CLK_ROOT_PRE_DIV2), +}; + +void dram_enable_bypass(ulong clk_val) { - struct src *src = (struct src *)SRC_BASE_ADDR; - void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0; - u32 pwdn_mask = 0, pll_clke = 0, bypass1 = 0, bypass2 = 0; - u32 val; - int ret; + int i; + struct dram_bypass_clk_setting *config; - setbits_le32(GPC_BASE_ADDR + 0xEC, BIT(7)); - setbits_le32(GPC_BASE_ADDR + 0xF8, BIT(5)); + for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) { + if (clk_val == imx8mq_dram_bypass_tbl[i].clk) + break; + } + + if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) { + printf("No matched freq table %lu\n", clk_val); + return; + } - pwdn_mask = SSCG_PLL_PD_MASK; - pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK; - bypass1 = SSCG_PLL_BYPASS1_MASK; - bypass2 = SSCG_PLL_BYPASS2_MASK; + config = &imx8mq_dram_bypass_tbl[i]; - /* Enable DDR1 and DDR2 domain */ - writel(SRC_DDR1_ENABLE_MASK, &src->ddr1_rcr); - writel(SRC_DDR1_ENABLE_MASK, &src->ddr2_rcr); + clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(config->alt_root_sel) | + CLK_ROOT_PRE_DIV(config->alt_pre_div)); + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(config->apb_root_sel) | + CLK_ROOT_PRE_DIV(config->apb_pre_div)); + clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(1)); +} + +void dram_disable_bypass(void) +{ + clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(0)); + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(4) | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5)); +} + +#ifdef CONFIG_SPL_BUILD +void dram_pll_init(ulong pll_val) +{ + u32 val; + void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0; + void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2; + + /* Bypass */ + setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK); + setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK); + + switch (pll_val) { + case MHZ(800): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(0); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39); + val |= SSCG_PLL_REF_DIVR2_VAL(29); + writel(val, pll_cfg_reg2); + break; + case MHZ(600): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(1); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39); + val |= SSCG_PLL_REF_DIVR2_VAL(29); + writel(val, pll_cfg_reg2); + break; + case MHZ(400): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(1); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39); + val |= SSCG_PLL_REF_DIVR2_VAL(29); + writel(val, pll_cfg_reg2); + break; + case MHZ(167): + val = readl(pll_cfg_reg2); + val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK | + SSCG_PLL_FEEDBACK_DIV_F2_MASK | + SSCG_PLL_FEEDBACK_DIV_F1_MASK | + SSCG_PLL_REF_DIVR2_MASK); + val |= SSCG_PLL_OUTPUT_DIV_VAL(3); + val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8); + val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45); + val |= SSCG_PLL_REF_DIVR2_VAL(30); + writel(val, pll_cfg_reg2); + break; + default: + break; + } /* Clear power down bit */ - clrbits_le32(pll_control_reg, pwdn_mask); + clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK); /* Eanble ARM_PLL/SYS_PLL */ - setbits_le32(pll_control_reg, pll_clke); + setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK); /* Clear bypass */ - clrbits_le32(pll_control_reg, bypass1); + clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK); __udelay(100); - clrbits_le32(pll_control_reg, bypass2); + clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK); /* Wait lock */ - ret = readl_poll_timeout(pll_control_reg, val, - val & SSCG_PLL_LOCK_MASK, 1); - if (ret) - printf("%s timeout\n", __func__); + while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK)) + ; } int frac_pll_init(u32 pll, enum frac_pll_out_val val) @@ -730,7 +816,7 @@ int clock_init(void) * Dump some clockes. */ #ifndef CONFIG_SPL_BUILD -int do_mx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, +int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 freq; @@ -785,7 +871,7 @@ int do_mx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, } U_BOOT_CMD( - clocks, CONFIG_SYS_MAXARGS, 1, do_mx8m_showclocks, + clocks, CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks, "display clocks", "" ); diff --git a/arch/arm/mach-imx/mx8m/clock_slice.c b/arch/arm/mach-imx/imx8m/clock_slice.c index 1a67c626f1..1a67c626f1 100644 --- a/arch/arm/mach-imx/mx8m/clock_slice.c +++ b/arch/arm/mach-imx/imx8m/clock_slice.c diff --git a/arch/arm/mach-imx/imx8m/imximage.cfg b/arch/arm/mach-imx/imx8m/imximage.cfg new file mode 100644 index 0000000000..714b24273b --- /dev/null +++ b/arch/arm/mach-imx/imx8m/imximage.cfg @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#define __ASSEMBLY__ + +FIT +BOOT_FROM sd +SIGNED_HDMI signed_hdmi_imx8m.bin +LOADER spl/u-boot-spl-ddr.bin 0x7E1000 +SECOND_LOADER u-boot.itb 0x40200000 0x60000 + +DDR_FW lpddr4_pmu_train_1d_imem.bin +DDR_FW lpddr4_pmu_train_1d_dmem.bin +DDR_FW lpddr4_pmu_train_2d_imem.bin +DDR_FW lpddr4_pmu_train_2d_dmem.bin diff --git a/arch/arm/mach-imx/mx8m/lowlevel_init.S b/arch/arm/mach-imx/imx8m/lowlevel_init.S index a4c6466ca9..a4c6466ca9 100644 --- a/arch/arm/mach-imx/mx8m/lowlevel_init.S +++ b/arch/arm/mach-imx/imx8m/lowlevel_init.S diff --git a/arch/arm/mach-imx/mx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 46873aa8dd..11251c5f9a 100644 --- a/arch/arm/mach-imx/mx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -78,6 +78,22 @@ static struct mm_region imx8m_mem_map[] = { .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE }, { + /* CAAM */ + .virt = 0x100000UL, + .phys = 0x100000UL, + .size = 0x8000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* TCM */ + .virt = 0x7C0000UL, + .phys = 0x7C0000UL, + .size = 0x80000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { /* OCRAM */ .virt = 0x900000UL, .phys = 0x900000UL, diff --git a/arch/arm/mach-imx/imx_bootaux.c b/arch/arm/mach-imx/imx_bootaux.c index a1ea5c13f1..18d7e6819c 100644 --- a/arch/arm/mach-imx/imx_bootaux.c +++ b/arch/arm/mach-imx/imx_bootaux.c @@ -17,15 +17,15 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data) if (!boot_private_data) return -EINVAL; - stack = *(ulong *)boot_private_data; - pc = *(ulong *)(boot_private_data + 4); + stack = *(u32 *)boot_private_data; + pc = *(u32 *)(boot_private_data + 4); /* Set the stack and pc to M4 bootROM */ writel(stack, M4_BOOTROM_BASE_ADDR); writel(pc, M4_BOOTROM_BASE_ADDR + 4); /* Enable M4 */ -#ifdef CONFIG_MX8M +#ifdef CONFIG_IMX8M call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0); #else clrsetbits_le32(SRC_BASE_ADDR + SRC_M4_REG_OFFSET, @@ -37,7 +37,7 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data) int arch_auxiliary_core_check_up(u32 core_id) { -#ifdef CONFIG_MX8M +#ifdef CONFIG_IMX8M return call_imx_sip(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0); #else unsigned int val; diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh new file mode 100755 index 0000000000..77f7143263 --- /dev/null +++ b/arch/arm/mach-imx/mkimage_fit_atf.sh @@ -0,0 +1,137 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +# +# script to generate FIT image source for i.MX8MQ boards with +# ARM Trusted Firmware and multiple device trees (given on the command line) +# +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...] + +[ -z "$BL31" ] && BL31="bl31.bin" +[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000" +[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000" + +if [ ! -f $BL31 ]; then + echo "ERROR: BL31 file $BL31 NOT found" >&2 + exit 0 +else + echo "$BL31 size: " >&2 + ls -lct $BL31 | awk '{print $5}' >&2 +fi + +BL32="tee.bin" + +if [ ! -f $BL32 ]; then + BL32=/dev/null +else + echo "Building with TEE support, make sure your $BL31 is compiled with spd. If you do not want tee, please delete $BL31" >&2 + echo "$BL32 size: " >&2 + ls -lct $BL32 | awk '{print $5}' >&2 +fi + +BL33="u-boot-nodtb.bin" + +if [ ! -f $BL33 ]; then + echo "ERROR: $BL33 file NOT found" >&2 + exit 0 +else + echo "u-boot-nodtb.bin size: " >&2 + ls -lct u-boot-nodtb.bin | awk '{print $5}' >&2 +fi + +for dtname in $* +do + echo "$dtname size: " >&2 + ls -lct $dtname | awk '{print $5}' >&2 +done + + +cat << __HEADER_EOF +/dts-v1/; + +/ { + description = "Configuration to load ATF before U-Boot"; + + images { + uboot@1 { + description = "U-Boot (64-bit)"; + data = /incbin/("$BL33"); + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x40200000>; + }; + atf@1 { + description = "ARM Trusted Firmware"; + data = /incbin/("$BL31"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <$ATF_LOAD_ADDR>; + entry = <$ATF_LOAD_ADDR>; + }; +__HEADER_EOF + +if [ -f $BL32 ]; then +cat << __HEADER_EOF + tee@1 { + description = "TEE firmware"; + data = /incbin/("$BL32"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <$TEE_LOAD_ADDR>; + entry = <$TEE_LOAD_ADDR>; + }; +__HEADER_EOF +fi + +cnt=1 +for dtname in $* +do + cat << __FDT_IMAGE_EOF + fdt@$cnt { + description = "$(basename $dtname .dtb)"; + data = /incbin/("$dtname"); + type = "flat_dt"; + compression = "none"; + }; +__FDT_IMAGE_EOF +cnt=$((cnt+1)) +done + +cat << __CONF_HEADER_EOF + }; + configurations { + default = "config@1"; + +__CONF_HEADER_EOF + +cnt=1 +for dtname in $* +do +if [ -f $BL32 ]; then +cat << __CONF_SECTION_EOF + config@$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot@1"; + loadables = "atf@1", "tee@1"; + fdt = "fdt@$cnt"; + }; +__CONF_SECTION_EOF +else +cat << __CONF_SECTION1_EOF + config@$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot@1"; + loadables = "atf@1"; + fdt = "fdt@$cnt"; + }; +__CONF_SECTION1_EOF +fi +cnt=$((cnt+1)) +done + +cat << __ITS_EOF + }; +}; +__ITS_EOF diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 06c25bae36..e7cce46e03 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -182,6 +182,7 @@ config TARGET_DISPLAY5 config TARGET_EMBESTMX6BOARDS bool "embestmx6boards" select BOARD_LATE_INIT + select SUPPORT_SPL config TARGET_GE_BX50V3 bool "General Electric Bx50v3" diff --git a/arch/arm/mach-imx/mx8m/Kconfig b/arch/arm/mach-imx/mx8m/Kconfig deleted file mode 100644 index 3a84c2f2b0..0000000000 --- a/arch/arm/mach-imx/mx8m/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -if ARCH_MX8M - -config MX8M - bool - select ROM_UNIFIED_SECTIONS - -config SYS_SOC - default "mx8m" - -endif diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c index a20b30d154..58a92278df 100644 --- a/arch/arm/mach-imx/spl.c +++ b/arch/arm/mach-imx/spl.c @@ -96,8 +96,8 @@ u32 spl_boot_device(void) return BOOT_DEVICE_NONE; } -#elif defined(CONFIG_MX7) || defined(CONFIG_MX8M) -/* Translate iMX7/MX8M boot device to the SPL boot device enumeration */ +#elif defined(CONFIG_MX7) || defined(CONFIG_IMX8M) +/* Translate iMX7/i.MX8M boot device to the SPL boot device enumeration */ u32 spl_boot_device(void) { #if defined(CONFIG_MX7) @@ -126,6 +126,7 @@ u32 spl_boot_device(void) enum boot_device boot_device_spl = get_boot_device(); switch (boot_device_spl) { +#if defined(CONFIG_MX7) case SD1_BOOT: case MMC1_BOOT: case SD2_BOOT: @@ -133,6 +134,14 @@ u32 spl_boot_device(void) case SD3_BOOT: case MMC3_BOOT: return BOOT_DEVICE_MMC1; +#elif defined(CONFIG_IMX8M) + case SD1_BOOT: + case MMC1_BOOT: + return BOOT_DEVICE_MMC1; + case SD2_BOOT: + case MMC2_BOOT: + return BOOT_DEVICE_MMC2; +#endif case NAND_BOOT: return BOOT_DEVICE_NAND; case SPI_NOR_BOOT: @@ -143,7 +152,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_NONE; } } -#endif /* CONFIG_MX6 || CONFIG_MX7 || CONFIG_MX8M */ +#endif /* CONFIG_MX7 || CONFIG_IMX8M */ #ifdef CONFIG_SPL_USB_GADGET_SUPPORT int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) @@ -220,14 +229,46 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) debug("image entry point: 0x%lX\n", spl_image->entry_point); - /* HAB looks for the CSF at the end of the authenticated data therefore, - * we need to subtract the size of the CSF from the actual filesize */ - offset = spl_image->size - CONFIG_CSF_SIZE; - if (!imx_hab_authenticate_image(spl_image->load_addr, - offset + IVT_SIZE + CSF_PAD_SIZE, - offset)) { + if (spl_image->flags & SPL_FIT_FOUND) { image_entry(); } else { + /* + * HAB looks for the CSF at the end of the authenticated + * data therefore, we need to subtract the size of the + * CSF from the actual filesize + */ + offset = spl_image->size - CONFIG_CSF_SIZE; + if (!imx_hab_authenticate_image(spl_image->load_addr, + offset + IVT_SIZE + + CSF_PAD_SIZE, offset)) { + image_entry(); + } else { + puts("spl: ERROR: image authentication fail\n"); + hang(); + } + } +} + +ulong board_spl_fit_size_align(ulong size) +{ + /* + * HAB authenticate_image requests the IVT offset is + * aligned to 0x1000 + */ + + size = ALIGN(size, 0x1000); + size += CONFIG_CSF_SIZE; + + return size; +} + +void board_spl_fit_post_load(ulong load_addr, size_t length) +{ + u32 offset = length - CONFIG_CSF_SIZE; + + if (imx_hab_authenticate_image(load_addr, + offset + IVT_SIZE + CSF_PAD_SIZE, + offset)) { puts("spl: ERROR: image authentication unsuccessful\n"); hang(); } diff --git a/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c b/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c index 4e5690eae3..2012d9fe04 100644 --- a/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c +++ b/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* - * (C) Copyright 2015 Google, Inc + * (C) Copyright 2015 Rockchip Electronics Co., Ltd */ #include <common.h> #include <asm/io.h> diff --git a/arch/arm/mach-rockchip/sdram_common.c b/arch/arm/mach-rockchip/sdram_common.c index 650d53e4d9..a27138083a 100644 --- a/arch/arm/mach-rockchip/sdram_common.c +++ b/arch/arm/mach-rockchip/sdram_common.c @@ -48,6 +48,24 @@ size_t rockchip_sdram_size(phys_addr_t reg) rank, col, bk, cs0_row, bw, row_3_4); } + /* + * This is workaround for issue we can't get correct size for 4GB ram + * in 32bit system and available before we really need ram space + * out of 4GB, eg.enable ARM LAPE(rk3288 supports 8GB ram). + * The size of 4GB is '0x1 00000000', and this value will be truncated + * to 0 in 32bit system, and system can not get correct ram size. + * Rockchip SoCs reserve a blob of space for peripheral near 4GB, + * and we are now setting SDRAM_MAX_SIZE as max available space for + * ram in 4GB, so we can use this directly to workaround the issue. + * TODO: + * 1. update correct value for SDRAM_MAX_SIZE as what dram + * controller sees. + * 2. update board_get_usable_ram_top() and dram_init_banksize() + * to reserve memory for peripheral space after previous update. + */ + if (size_mb > (SDRAM_MAX_SIZE >> 20)) + size_mb = (SDRAM_MAX_SIZE >> 20); + return (size_t)size_mb << 20; } diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c index 1b871c62ce..972dbe8ae5 100644 --- a/arch/arm/mach-uniphier/board_late_init.c +++ b/arch/arm/mach-uniphier/board_late_init.c @@ -66,20 +66,20 @@ int board_late_init(void) switch (uniphier_boot_device_raw()) { case BOOT_DEVICE_MMC1: printf("eMMC Boot"); - env_set("bootcmd", "run bootcmd_mmc0; run distro_bootcmd"); + env_set("bootdev", "emmc"); break; case BOOT_DEVICE_NAND: printf("NAND Boot"); - env_set("bootcmd", "run bootcmd_ubifs0; run distro_bootcmd"); + env_set("bootdev", "nand"); nand_denali_wp_disable(); break; case BOOT_DEVICE_NOR: printf("NOR Boot"); - env_set("bootcmd", "run tftpboot; run distro_bootcmd"); + env_set("bootdev", "nor"); break; case BOOT_DEVICE_USB: printf("USB Boot"); - env_set("bootcmd", "run bootcmd_usb0; run distro_bootcmd"); + env_set("bootdev", "usb"); break; default: printf("Unknown"); diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c index 60b32cca81..f36b8702ef 100644 --- a/arch/riscv/lib/bootm.c +++ b/arch/riscv/lib/bootm.c @@ -86,7 +86,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) bootstage_mark(BOOTSTAGE_ID_RUN_OS); - debug("## Transferring control to Linux (at address %08lx) ...\n", + debug("## Transferring control to kernel (at address %08lx) ...\n", (ulong)kernel); announce_and_cleanup(fake); @@ -118,3 +118,9 @@ int do_bootm_linux(int flag, int argc, char * const argv[], boot_jump_linux(images, flag); return 0; } + +int do_bootm_vxworks(int flag, int argc, char * const argv[], + bootm_headers_t *images) +{ + return do_bootm_linux(flag, argc, argv, images); +} diff --git a/board/embest/mx6boards/MAINTAINERS b/board/embest/mx6boards/MAINTAINERS index 0ffd4668b4..02756c58b3 100644 --- a/board/embest/mx6boards/MAINTAINERS +++ b/board/embest/mx6boards/MAINTAINERS @@ -5,3 +5,4 @@ F: board/embest/mx6boards/ F: include/configs/embestmx6boards.h F: configs/marsboard_defconfig F: configs/riotboard_defconfig +F: configs/riotboard_spl_defconfig diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index 8930c36fe6..fed92aa88a 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -608,3 +608,51 @@ int checkboard(void) return 0; } + +#ifdef CONFIG_SPL_BUILD +#include <spl.h> + +void board_init_f(ulong dummy) +{ + u32 cputype = cpu_type(get_cpu_rev()); + + switch (cputype) { + case MXC_CPU_MX6SOLO: + board_type = BOARD_IS_RIOTBOARD; + break; + case MXC_CPU_MX6D: + board_type = BOARD_IS_MARSBOARD; + break; + } + arch_cpu_init(); + + /* setup GP timer */ + timer_init(); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + setup_iomux_uart(); + preloader_console_init(); +#endif +} + +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = BOOT_DEVICE_MMC1; +} + +/* + * In order to jump to standard u-boot shell, you have to connect pin 5 of J13 + * to pin 3 (ground). + */ +int spl_start_uboot(void) +{ + int gpio_key = IMX_GPIO_NR(4, 16); + + gpio_direction_input(gpio_key); + if (gpio_get_value(gpio_key) == 0) + return 1; + else + return 0; +} + +#endif diff --git a/board/freescale/imx8mq_evk/Kconfig b/board/freescale/imx8mq_evk/Kconfig new file mode 100644 index 0000000000..421b081c76 --- /dev/null +++ b/board/freescale/imx8mq_evk/Kconfig @@ -0,0 +1,12 @@ +if TARGET_IMX8MQ_EVK + +config SYS_BOARD + default "imx8mq_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "imx8mq_evk" + +endif diff --git a/board/freescale/imx8mq_evk/MAINTAINERS b/board/freescale/imx8mq_evk/MAINTAINERS new file mode 100644 index 0000000000..a2e320cb10 --- /dev/null +++ b/board/freescale/imx8mq_evk/MAINTAINERS @@ -0,0 +1,6 @@ +i.MX8MQ EVK BOARD +M: Peng Fan <peng.fan@nxp.com> +S: Maintained +F: board/freescale/imx8mq_evk/ +F: include/configs/imx8mq_evk.h +F: configs/imx8mq_evk_defconfig diff --git a/board/freescale/imx8mq_evk/Makefile b/board/freescale/imx8mq_evk/Makefile new file mode 100644 index 0000000000..cf046963d2 --- /dev/null +++ b/board/freescale/imx8mq_evk/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2017 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += imx8mq_evk.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o lpddr4_timing_b0.o +endif diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README new file mode 100644 index 0000000000..07dbfb01fe --- /dev/null +++ b/board/freescale/imx8mq_evk/README @@ -0,0 +1,36 @@ +U-Boot for the NXP i.MX8MQ EVK board + +Quick Start +==================== +- Build the ARM Trusted firmware binary +- Get ddr and hdmi fimware +- Build U-Boot +- Boot + +Get and Build the ARM Trusted firmware +==================== +Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +branch: imx_4.14.62_1.0.0_beta +$ make PLAT=imx8mq bl31 + +Get the ddr and hdmi firmware +==================== +Note: srctree is U-Boot source directory +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin +$ chmod +x firmware-imx-7.9.bin +$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree) +$ cp firmware-imx-7.9/firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctee) + +Build U-Boot +==================== +$ export ARCH=arm64 +$ export CROSS_COMPILE=aarch64-poky-linux- +$ make imx8mq_evk_defconfig +$ make flash.bin + +Burn the flash.bin to MicroSD card offset 33KB +$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 + +Boot +==================== +Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD. diff --git a/board/freescale/imx8mq_evk/imx8mq_evk.c b/board/freescale/imx8mq_evk/imx8mq_evk.c new file mode 100644 index 0000000000..54e0c38431 --- /dev/null +++ b/board/freescale/imx8mq_evk/imx8mq_evk.c @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <asm/io.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm-generic/gpio.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <asm/arch/imx8mq_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch/clock.h> +#include <spl.h> +#include <power/pmic.h> +#include <power/pfuze100_pmic.h> +#include "../common/pfuze.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) + +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart_pads[] = { + IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +int board_early_init_f(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + set_wdog_reset(wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); + + return 0; +} + +int dram_init(void) +{ + /* rom_pointer[1] contains the size of TEE occupies */ + if (rom_pointer[1]) + gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1]; + else + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +#ifdef CONFIG_FEC_MXC +#define FEC_RST_PAD IMX_GPIO_NR(1, 9) +static iomux_v3_cfg_t const fec1_rst_pads[] = { + IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_fec(void) +{ + imx_iomux_v3_setup_multiple_pads(fec1_rst_pads, + ARRAY_SIZE(fec1_rst_pads)); + + gpio_request(IMX_GPIO_NR(1, 9), "fec1_rst"); + gpio_direction_output(IMX_GPIO_NR(1, 9), 0); + udelay(500); + gpio_direction_output(IMX_GPIO_NR(1, 9), 1); +} + +static int setup_fec(void) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + setup_iomux_fec(); + + /* Use 125M anatop REF_CLK1 for ENET1, not from external */ + clrsetbits_le32(&gpr->gpr[1], BIT(13) | BIT(17), 0); + return set_clk_enet(ENET_125MHZ); +} + +int board_phy_config(struct phy_device *phydev) +{ + /* enable rgmii rxc skew and phy mode select to RGMII copper */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); + + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + if (phydev->drv->config) + phydev->drv->config(phydev); + return 0; +} +#endif + +int board_init(void) +{ +#ifdef CONFIG_FEC_MXC + setup_fec(); +#endif + + return 0; +} + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + env_set("board_name", "EVK"); + env_set("board_rev", "iMX8MQ"); +#endif + + return 0; +} diff --git a/board/freescale/imx8mq_evk/lpddr4_timing.c b/board/freescale/imx8mq_evk/lpddr4_timing.c new file mode 100644 index 0000000000..f7ea799343 --- /dev/null +++ b/board/freescale/imx8mq_evk/lpddr4_timing.c @@ -0,0 +1,1320 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +#define WR_POST_EXT_3200 /* recommened to define */ + +struct dram_cfg_param lpddr4_ddrc_cfg[] = { + /* Start to config, default 3200mbps */ + { DDRC_DBG1(0), 0x00000001 }, + { DDRC_PWRCTL(0), 0x00000001 }, + { DDRC_MSTR(0), 0xa3080020 }, + { DDRC_MSTR2(0), 0x00000000 }, + { DDRC_RFSHTMG(0), 0x006100E0 }, + { DDRC_INIT0(0), 0xC003061B }, + { DDRC_INIT1(0), 0x009D0000 }, + { DDRC_INIT3(0), 0x00D4002D }, +#ifdef WR_POST_EXT_3200 + { DDRC_INIT4(0), 0x00330008 }, +#else + { DDRC_INIT4(0), 0x00310008 }, +#endif + { DDRC_INIT6(0), 0x0066004a }, + { DDRC_INIT7(0), 0x0006004a }, + + { DDRC_DRAMTMG0(0), 0x1A201B22 }, + { DDRC_DRAMTMG1(0), 0x00060633 }, + { DDRC_DRAMTMG3(0), 0x00C0C000 }, + { DDRC_DRAMTMG4(0), 0x0F04080F }, + { DDRC_DRAMTMG5(0), 0x02040C0C }, + { DDRC_DRAMTMG6(0), 0x01010007 }, + { DDRC_DRAMTMG7(0), 0x00000401 }, + { DDRC_DRAMTMG12(0), 0x00020600 }, + { DDRC_DRAMTMG13(0), 0x0C100002 }, + { DDRC_DRAMTMG14(0), 0x000000E6 }, + { DDRC_DRAMTMG17(0), 0x00A00050 }, + + { DDRC_ZQCTL0(0), 0x03200018 }, + { DDRC_ZQCTL1(0), 0x028061A8 }, + { DDRC_ZQCTL2(0), 0x00000000 }, + + { DDRC_DFITMG0(0), 0x0497820A }, + { DDRC_DFITMG1(0), 0x00080303 }, + { DDRC_DFIUPD0(0), 0xE0400018 }, + { DDRC_DFIUPD1(0), 0x00DF00E4 }, + { DDRC_DFIUPD2(0), 0x80000000 }, + { DDRC_DFIMISC(0), 0x00000011 }, + { DDRC_DFITMG2(0), 0x0000170A }, + + { DDRC_DBICTL(0), 0x00000001 }, + { DDRC_DFIPHYMSTR(0), 0x00000001 }, + { DDRC_RANKCTL(0), 0x00000c99 }, + { DDRC_DRAMTMG2(0), 0x070E171a }, + + /* address mapping */ + { DDRC_ADDRMAP0(0), 0x00000015 }, + { DDRC_ADDRMAP3(0), 0x00000000 }, + { DDRC_ADDRMAP4(0), 0x00001F1F }, + /* bank interleave */ + { DDRC_ADDRMAP1(0), 0x00080808 }, + { DDRC_ADDRMAP5(0), 0x07070707 }, + { DDRC_ADDRMAP6(0), 0x08080707 }, + + /* performance setting */ + { DDRC_ODTCFG(0), 0x0b060908 }, + { DDRC_ODTMAP(0), 0x00000000 }, + { DDRC_SCHED(0), 0x29511505 }, + { DDRC_SCHED1(0), 0x0000002c }, + { DDRC_PERFHPR1(0), 0x5900575b }, + { DDRC_PERFLPR1(0), 0x00000009 }, + { DDRC_PERFWR1(0), 0x02005574 }, + { DDRC_DBG0(0), 0x00000016 }, + { DDRC_DBG1(0), 0x00000000 }, + { DDRC_DBGCMD(0), 0x00000000 }, + { DDRC_SWCTL(0), 0x00000001 }, + { DDRC_POISONCFG(0), 0x00000011 }, + { DDRC_PCCFG(0), 0x00000111 }, + { DDRC_PCFGR_0(0), 0x000010f3 }, + { DDRC_PCFGW_0(0), 0x000072ff }, + { DDRC_PCTRL_0(0), 0x00000001 }, + { DDRC_PCFGQOS0_0(0), 0x01110d00 }, + { DDRC_PCFGQOS1_0(0), 0x00620790 }, + { DDRC_PCFGWQOS0_0(0), 0x00100001 }, + { DDRC_PCFGWQOS1_0(0), 0x0000041f }, + + /* Frequency 1: 400mbps */ + { DDRC_FREQ1_DRAMTMG0(0), 0x0d0b010c }, + { DDRC_FREQ1_DRAMTMG1(0), 0x00030410 }, + { DDRC_FREQ1_DRAMTMG2(0), 0x0305090c }, + { DDRC_FREQ1_DRAMTMG3(0), 0x00505006 }, + { DDRC_FREQ1_DRAMTMG4(0), 0x05040305 }, + { DDRC_FREQ1_DRAMTMG5(0), 0x0d0e0504 }, + { DDRC_FREQ1_DRAMTMG6(0), 0x0a060004 }, + { DDRC_FREQ1_DRAMTMG7(0), 0x0000090e }, + { DDRC_FREQ1_DRAMTMG14(0), 0x00000032 }, + { DDRC_FREQ1_DRAMTMG15(0), 0x00000000 }, + { DDRC_FREQ1_DRAMTMG17(0), 0x0036001b }, + { DDRC_FREQ1_DERATEINT(0), 0x7e9fbeb1 }, + { DDRC_FREQ1_DFITMG0(0), 0x03818200 }, + { DDRC_FREQ1_DFITMG2(0), 0x00000000 }, + { DDRC_FREQ1_RFSHTMG(0), 0x000C001c }, + { DDRC_FREQ1_INIT3(0), 0x00840000 }, + { DDRC_FREQ1_INIT4(0), 0x00310008 }, + { DDRC_FREQ1_INIT6(0), 0x0066004a }, + { DDRC_FREQ1_INIT7(0), 0x0006004a }, + + /* Frequency 2: 100mbps */ + { DDRC_FREQ2_DRAMTMG0(0), 0x0d0b010c }, + { DDRC_FREQ2_DRAMTMG1(0), 0x00030410 }, + { DDRC_FREQ2_DRAMTMG2(0), 0x0305090c }, + { DDRC_FREQ2_DRAMTMG3(0), 0x00505006 }, + { DDRC_FREQ2_DRAMTMG4(0), 0x05040305 }, + { DDRC_FREQ2_DRAMTMG5(0), 0x0d0e0504 }, + { DDRC_FREQ2_DRAMTMG6(0), 0x0a060004 }, + { DDRC_FREQ2_DRAMTMG7(0), 0x0000090e }, + { DDRC_FREQ2_DRAMTMG14(0), 0x00000032 }, + { DDRC_FREQ2_DRAMTMG17(0), 0x0036001b }, + { DDRC_FREQ2_DERATEINT(0), 0x7e9fbeb1 }, + { DDRC_FREQ2_DFITMG0(0), 0x03818200 }, + { DDRC_FREQ2_DFITMG2(0), 0x00000000 }, + { DDRC_FREQ2_RFSHTMG(0), 0x00030007 }, + { DDRC_FREQ2_INIT3(0), 0x00840000 }, + { DDRC_FREQ2_INIT4(0), 0x00310008 }, + { DDRC_FREQ2_INIT6(0), 0x0066004a }, + { DDRC_FREQ2_INIT7(0), 0x0006004a }, +}; + +/* PHY Initialize Configuration */ +struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + { 0x20110, 0x02 }, + { 0x20111, 0x03 }, + { 0x20112, 0x04 }, + { 0x20113, 0x05 }, + { 0x20114, 0x00 }, + { 0x20115, 0x01 }, + + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + + { 0x2002e, 0x2 }, + { 0x12002e, 0x2 }, + { 0x22002e, 0x2 }, + + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + +#ifdef WR_POST_EXT_3200 + { 0x20024, 0xeb }, +#else + { 0x20024, 0xab }, +#endif + { 0x2003a, 0x0 }, + { 0x120024, 0xab }, + { 0x2003a, 0x0 }, + { 0x220024, 0xab }, + { 0x2003a, 0x0 }, + { 0x20056, 0x3 }, + { 0x120056, 0xa }, + { 0x220056, 0xa }, + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + + { 0x10049, 0xfbe }, + { 0x10149, 0xfbe }, + { 0x11049, 0xfbe }, + { 0x11149, 0xfbe }, + { 0x12049, 0xfbe }, + { 0x12149, 0xfbe }, + { 0x13049, 0xfbe }, + { 0x13149, 0xfbe }, + { 0x110049, 0xfbe }, + { 0x110149, 0xfbe }, + { 0x111049, 0xfbe }, + { 0x111149, 0xfbe }, + { 0x112049, 0xfbe }, + { 0x112149, 0xfbe }, + { 0x113049, 0xfbe }, + { 0x113149, 0xfbe }, + { 0x210049, 0xfbe }, + { 0x210149, 0xfbe }, + { 0x211049, 0xfbe }, + { 0x211149, 0xfbe }, + { 0x212049, 0xfbe }, + { 0x212149, 0xfbe }, + { 0x213049, 0xfbe }, + { 0x213149, 0xfbe }, + + { 0x43, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x1043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x2043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x3043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x4043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x5043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x6043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x7043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x8043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + { 0x9043, ((LPDDR4_PHY_ADDR_RON << 5) | LPDDR4_PHY_ADDR_RON) }, + + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x320 }, + { 0x120008, 0x64 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x660 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5665 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, + + { 0x200c7, 0x80 }, + { 0x1200c7, 0x80 }, + { 0x2200c7, 0x80 }, + { 0x200ca, 0x106 }, + { 0x1200ca, 0x106 }, + { 0x2200ca, 0x106 }, +}; + +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, /* PHY Ron/Rtt */ + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_1d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + + { 0x54019, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + /* MR3/MR2 */ +#ifdef WR_POST_EXT_3200 + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d /*0x312d*/ }, +#else + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d/*0x312d*/ }, +#endif + /* MR11/MR4 */ + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + /* self:0x284d//MR13/MR12 */ + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA)/*0x084d*/ }, + /* MR16/MR14*/ + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0/*0x4d*/ }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8)/*0x500*/ }, + /* MR1 */ + { 0x54038, 0xd400 }, + /* MR3/MR2 */ +#ifdef WR_POST_EXT_3200 + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d/*0x312d*/ }, +#else + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d/*0x312d*/ }, +#endif + /* MR11/MR4 */ + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + /* self:0x284d//MR13/MR12 */ + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA)/*0x084d*/ }, + /* MR16/MR14 */ + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1/*0x4d*/ }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x500*/ }, + /* { 0x5403d, 0x500 } */ + { 0x5403d, (LPDDR4_MR22_RANK1 << 8)/*0x500*/ }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x101 }, + { 0x54003, 0x190 }, + { 0x54004, 0x2 }, + /* PHY Ron/Rtt */ + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT)/*0x2828*/ }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, LPDDR4_TRAIN_SEQ_400 }, + { 0x54009, LPDDR4_HDT_CTL_400_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_400 << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + /* MR4/MR3 */ + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1)/*0x31*/ }, + /* MR12/MR11 */ + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ)/*0x4d46*/ }, + /* self:0x4d28//MR14/MR13 */ + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08)/*0x4d08*/ }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0/*0x5*/ }, + { 0x5401f, 0x84 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x1)/*0x31*/ }, /* MR4/MR3 */ + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ)/*0x4d46*/ },/* MR12/MR11 */ + /* self:0x4d28//MR14/MR13 */ + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08)/*0x4d08*/ }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x54034, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0x8400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x5403a, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P2 message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp2_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x102 }, + { 0x54003, 0x64 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, LPDDR4_TRAIN_SEQ_100 }, + { 0x54009, LPDDR4_HDT_CTL_100_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_100 << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x84 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x84 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | (LPDDR4_RTT_CA << 4) | + LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x8400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x54034, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0x8400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x00 }, + { 0x5403a, (((LPDDR4_RTT_CA << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P0 2D message block paremeter for training firmware */ +struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, LPDDR4_HDT_CTL_2D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_2d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, (LPDDR4_2D_SHARE << 8) | 0x00 }, + { 0x54010, LPDDR4_2D_WEIGHT }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, +#ifdef WR_POST_EXT_3200 + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, +#else + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, +#endif + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + + { 0x54032, 0xd400 }, +#ifdef WR_POST_EXT_3200 + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, +#else + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d }, +#endif + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0xd400 }, +#ifdef WR_POST_EXT_3200 + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, +#else + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x2d }, +#endif + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +struct dram_cfg_param lpddr4_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xf }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x630 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x630 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x630 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x630 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x630 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x630 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x630 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x630 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x630 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x630 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x630 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x630 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x630 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xa }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x2 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x900a4, 0x10 }, + { 0x900a5, 0x10 }, + { 0x900a6, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x623 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x623 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900a7, 0x0 }, + { 0x900a8, 0x790 }, + { 0x900a9, 0x11a }, + { 0x900aa, 0x8 }, + { 0x900ab, 0x7aa }, + { 0x900ac, 0x2a }, + { 0x900ad, 0x10 }, + { 0x900ae, 0x7b2 }, + { 0x900af, 0x2a }, + { 0x900b0, 0x0 }, + { 0x900b1, 0x7c8 }, + { 0x900b2, 0x109 }, + { 0x900b3, 0x10 }, + { 0x900b4, 0x2a8 }, + { 0x900b5, 0x129 }, + { 0x900b6, 0x8 }, + { 0x900b7, 0x370 }, + { 0x900b8, 0x129 }, + { 0x900b9, 0xa }, + { 0x900ba, 0x3c8 }, + { 0x900bb, 0x1a9 }, + { 0x900bc, 0xc }, + { 0x900bd, 0x408 }, + { 0x900be, 0x199 }, + { 0x900bf, 0x14 }, + { 0x900c0, 0x790 }, + { 0x900c1, 0x11a }, + { 0x900c2, 0x8 }, + { 0x900c3, 0x4 }, + { 0x900c4, 0x18 }, + { 0x900c5, 0xe }, + { 0x900c6, 0x408 }, + { 0x900c7, 0x199 }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x8568 }, + { 0x900ca, 0x108 }, + { 0x900cb, 0x18 }, + { 0x900cc, 0x790 }, + { 0x900cd, 0x16a }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x1d8 }, + { 0x900d0, 0x169 }, + { 0x900d1, 0x10 }, + { 0x900d2, 0x8558 }, + { 0x900d3, 0x168 }, + { 0x900d4, 0x70 }, + { 0x900d5, 0x788 }, + { 0x900d6, 0x16a }, + { 0x900d7, 0x1ff8 }, + { 0x900d8, 0x85a8 }, + { 0x900d9, 0x1e8 }, + { 0x900da, 0x50 }, + { 0x900db, 0x798 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x60 }, + { 0x900de, 0x7a0 }, + { 0x900df, 0x16a }, + { 0x900e0, 0x8 }, + { 0x900e1, 0x8310 }, + { 0x900e2, 0x168 }, + { 0x900e3, 0x8 }, + { 0x900e4, 0xa310 }, + { 0x900e5, 0x168 }, + { 0x900e6, 0xa }, + { 0x900e7, 0x408 }, + { 0x900e8, 0x169 }, + { 0x900e9, 0x6e }, + { 0x900ea, 0x0 }, + { 0x900eb, 0x68 }, + { 0x900ec, 0x0 }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x0 }, + { 0x900f0, 0x8310 }, + { 0x900f1, 0x168 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0xa310 }, + { 0x900f4, 0x168 }, + { 0x900f5, 0x1ff8 }, + { 0x900f6, 0x85a8 }, + { 0x900f7, 0x1e8 }, + { 0x900f8, 0x68 }, + { 0x900f9, 0x798 }, + { 0x900fa, 0x16a }, + { 0x900fb, 0x78 }, + { 0x900fc, 0x7a0 }, + { 0x900fd, 0x16a }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x790 }, + { 0x90100, 0x16a }, + { 0x90101, 0x8 }, + { 0x90102, 0x8b10 }, + { 0x90103, 0x168 }, + { 0x90104, 0x8 }, + { 0x90105, 0xab10 }, + { 0x90106, 0x168 }, + { 0x90107, 0xa }, + { 0x90108, 0x408 }, + { 0x90109, 0x169 }, + { 0x9010a, 0x58 }, + { 0x9010b, 0x0 }, + { 0x9010c, 0x68 }, + { 0x9010d, 0x0 }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x0 }, + { 0x90111, 0x8b10 }, + { 0x90112, 0x168 }, + { 0x90113, 0x0 }, + { 0x90114, 0xab10 }, + { 0x90115, 0x168 }, + { 0x90116, 0x0 }, + { 0x90117, 0x1d8 }, + { 0x90118, 0x169 }, + { 0x90119, 0x80 }, + { 0x9011a, 0x790 }, + { 0x9011b, 0x16a }, + { 0x9011c, 0x18 }, + { 0x9011d, 0x7aa }, + { 0x9011e, 0x6a }, + { 0x9011f, 0xa }, + { 0x90120, 0x0 }, + { 0x90121, 0x1e9 }, + { 0x90122, 0x8 }, + { 0x90123, 0x8080 }, + { 0x90124, 0x108 }, + { 0x90125, 0xf }, + { 0x90126, 0x408 }, + { 0x90127, 0x169 }, + { 0x90128, 0xc }, + { 0x90129, 0x0 }, + { 0x9012a, 0x68 }, + { 0x9012b, 0x9 }, + { 0x9012c, 0x0 }, + { 0x9012d, 0x1a9 }, + { 0x9012e, 0x0 }, + { 0x9012f, 0x408 }, + { 0x90130, 0x169 }, + { 0x90131, 0x0 }, + { 0x90132, 0x8080 }, + { 0x90133, 0x108 }, + { 0x90134, 0x8 }, + { 0x90135, 0x7aa }, + { 0x90136, 0x6a }, + { 0x90137, 0x0 }, + { 0x90138, 0x8568 }, + { 0x90139, 0x108 }, + { 0x9013a, 0xb7 }, + { 0x9013b, 0x790 }, + { 0x9013c, 0x16a }, + { 0x9013d, 0x1f }, + { 0x9013e, 0x0 }, + { 0x9013f, 0x68 }, + { 0x90140, 0x8 }, + { 0x90141, 0x8558 }, + { 0x90142, 0x168 }, + { 0x90143, 0xf }, + { 0x90144, 0x408 }, + { 0x90145, 0x169 }, + { 0x90146, 0xc }, + { 0x90147, 0x0 }, + { 0x90148, 0x68 }, + { 0x90149, 0x0 }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0x0 }, + { 0x9014d, 0x8558 }, + { 0x9014e, 0x168 }, + { 0x9014f, 0x8 }, + { 0x90150, 0x3c8 }, + { 0x90151, 0x1a9 }, + { 0x90152, 0x3 }, + { 0x90153, 0x370 }, + { 0x90154, 0x129 }, + { 0x90155, 0x20 }, + { 0x90156, 0x2aa }, + { 0x90157, 0x9 }, + { 0x90158, 0x0 }, + { 0x90159, 0x400 }, + { 0x9015a, 0x10e }, + { 0x9015b, 0x8 }, + { 0x9015c, 0xe8 }, + { 0x9015d, 0x109 }, + { 0x9015e, 0x0 }, + { 0x9015f, 0x8140 }, + { 0x90160, 0x10c }, + { 0x90161, 0x10 }, + { 0x90162, 0x8138 }, + { 0x90163, 0x10c }, + { 0x90164, 0x8 }, + { 0x90165, 0x7c8 }, + { 0x90166, 0x101 }, + { 0x90167, 0x8 }, + { 0x90168, 0x0 }, + { 0x90169, 0x8 }, + { 0x9016a, 0x8 }, + { 0x9016b, 0x448 }, + { 0x9016c, 0x109 }, + { 0x9016d, 0xf }, + { 0x9016e, 0x7c0 }, + { 0x9016f, 0x109 }, + { 0x90170, 0x0 }, + { 0x90171, 0xe8 }, + { 0x90172, 0x109 }, + { 0x90173, 0x47 }, + { 0x90174, 0x630 }, + { 0x90175, 0x109 }, + { 0x90176, 0x8 }, + { 0x90177, 0x618 }, + { 0x90178, 0x109 }, + { 0x90179, 0x8 }, + { 0x9017a, 0xe0 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x0 }, + { 0x9017d, 0x7c8 }, + { 0x9017e, 0x109 }, + { 0x9017f, 0x8 }, + { 0x90180, 0x8140 }, + { 0x90181, 0x10c }, + { 0x90182, 0x0 }, + { 0x90183, 0x1 }, + { 0x90184, 0x8 }, + { 0x90185, 0x8 }, + { 0x90186, 0x4 }, + { 0x90187, 0x8 }, + { 0x90188, 0x8 }, + { 0x90189, 0x7c8 }, + { 0x9018a, 0x101 }, + { 0x90006, 0x0 }, + { 0x90007, 0x0 }, + { 0x90008, 0x8 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x0 }, + { 0x9000b, 0x0 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x2a }, + { 0x90026, 0x6a }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x2000b, 0x64 }, + { 0x2000c, 0xc8 }, + { 0x2000d, 0x7d0 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0xc }, + { 0x12000c, 0x19 }, + { 0x12000d, 0xfa }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x60 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x2003a, 0x2 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +}; + +struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { + /* P0 3200mts 1D */ + .drate = 3200, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg), + }, + { + /* P1 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg), + }, + { + /* P0 3200mts 2D */ + .drate = 3200, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg), + .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie), + .fsp_table = { 3200, 400, 100, }, +}; diff --git a/board/freescale/imx8mq_evk/lpddr4_timing_b0.c b/board/freescale/imx8mq_evk/lpddr4_timing_b0.c new file mode 100644 index 0000000000..ec68edaf69 --- /dev/null +++ b/board/freescale/imx8mq_evk/lpddr4_timing_b0.c @@ -0,0 +1,1191 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <linux/kernel.h> +#include <common.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +#define WR_POST_EXT_3200 /* recommened to define */ + +static struct dram_cfg_param lpddr4_ddrc_cfg[] = { + /* Start to config, default 3200mbps */ + /* dis_dq=1, indicates no reads or writes are issued to SDRAM */ + { DDRC_DBG1(0), 0x00000001 }, + /* selfref_en=1, SDRAM enter self-refresh state */ + { DDRC_PWRCTL(0), 0x00000001 }, + { DDRC_MSTR(0), 0xa3080020 }, + { DDRC_MSTR2(0), 0x00000000 }, + { DDRC_RFSHTMG(0), 0x006100E0 }, + { DDRC_INIT0(0), 0xC003061B }, + { DDRC_INIT1(0), 0x009D0000 }, + { DDRC_INIT3(0), 0x00D4002D }, +#ifdef WR_POST_EXT_3200 /* recommened to define */ + { DDRC_INIT4(0), 0x00330008 }, +#else + { DDRC_INIT4(0), 0x00310008 }, +#endif + { DDRC_INIT6(0), 0x0066004a }, + { DDRC_INIT7(0), 0x0006004a }, + + { DDRC_DRAMTMG0(0), 0x1A201B22 }, + { DDRC_DRAMTMG1(0), 0x00060633 }, + { DDRC_DRAMTMG3(0), 0x00C0C000 }, + { DDRC_DRAMTMG4(0), 0x0F04080F }, + { DDRC_DRAMTMG5(0), 0x02040C0C }, + { DDRC_DRAMTMG6(0), 0x01010007 }, + { DDRC_DRAMTMG7(0), 0x00000401 }, + { DDRC_DRAMTMG12(0), 0x00020600 }, + { DDRC_DRAMTMG13(0), 0x0C100002 }, + { DDRC_DRAMTMG14(0), 0x000000E6 }, + { DDRC_DRAMTMG17(0), 0x00A00050 }, + + { DDRC_ZQCTL0(0), 0x03200018 }, + { DDRC_ZQCTL1(0), 0x028061A8 }, + { DDRC_ZQCTL2(0), 0x00000000 }, + + { DDRC_DFITMG0(0), 0x0497820A }, + { DDRC_DFITMG1(0), 0x00080303 }, + { DDRC_DFIUPD0(0), 0xE0400018 }, + { DDRC_DFIUPD1(0), 0x00DF00E4 }, + { DDRC_DFIUPD2(0), 0x80000000 }, + { DDRC_DFIMISC(0), 0x00000011 }, + { DDRC_DFITMG2(0), 0x0000170A }, + + { DDRC_DBICTL(0), 0x00000001 }, + { DDRC_DFIPHYMSTR(0), 0x00000001 }, + + /* need be refined by ddrphy trained value */ + { DDRC_RANKCTL(0), 0x00000c99 }, + { DDRC_DRAMTMG2(0), 0x070E171a }, + + /* address mapping */ + /* Address map is from MSB 29: r15, r14, cs, r13-r0, b2-b0, c9-c0 */ + { DDRC_ADDRMAP0(0), 0x00000015 }, + { DDRC_ADDRMAP3(0), 0x00000000 }, + /* addrmap_col_b10 addrmap_col_b11 set to de-activated (5-bit width) */ + { DDRC_ADDRMAP4(0), 0x00001F1F }, + /* bank interleave */ + /* addrmap_bank_b2, addrmap_bank_b1, addrmap_bank_b0 */ + { DDRC_ADDRMAP1(0), 0x00080808 }, + /* addrmap_row_b11 addrmap_row_b10_b2 addrmap_row_b1 addrmap_row_b0 */ + { DDRC_ADDRMAP5(0), 0x07070707 }, + /* addrmap_row_b15 addrmap_row_b14 addrmap_row_b13 addrmap_row_b12 */ + { DDRC_ADDRMAP6(0), 0x08080707 }, + + /* 667mts frequency setting */ + { DDRC_FREQ1_DERATEEN(0), 0x0000000 }, + { DDRC_FREQ1_DERATEINT(0), 0x0800000 }, + { DDRC_FREQ1_RFSHCTL0(0), 0x0210000 }, + { DDRC_FREQ1_RFSHTMG(0), 0x014001E }, + { DDRC_FREQ1_INIT3(0), 0x0140009 }, + { DDRC_FREQ1_INIT4(0), 0x00310008 }, + { DDRC_FREQ1_INIT6(0), 0x0066004a }, + { DDRC_FREQ1_INIT7(0), 0x0006004a }, + { DDRC_FREQ1_DRAMTMG0(0), 0xB070A07 }, + { DDRC_FREQ1_DRAMTMG1(0), 0x003040A }, + { DDRC_FREQ1_DRAMTMG2(0), 0x305080C }, + { DDRC_FREQ1_DRAMTMG3(0), 0x0505000 }, + { DDRC_FREQ1_DRAMTMG4(0), 0x3040203 }, + { DDRC_FREQ1_DRAMTMG5(0), 0x2030303 }, + { DDRC_FREQ1_DRAMTMG6(0), 0x2020004 }, + { DDRC_FREQ1_DRAMTMG7(0), 0x0000302 }, + { DDRC_FREQ1_DRAMTMG12(0), 0x0020310 }, + { DDRC_FREQ1_DRAMTMG13(0), 0xA100002 }, + { DDRC_FREQ1_DRAMTMG14(0), 0x0000020 }, + { DDRC_FREQ1_DRAMTMG17(0), 0x0220011 }, + { DDRC_FREQ1_ZQCTL0(0), 0x0A70005 }, + { DDRC_FREQ1_DFITMG0(0), 0x3858202 }, + { DDRC_FREQ1_DFITMG1(0), 0x0000404 }, + { DDRC_FREQ1_DFITMG2(0), 0x0000502 }, + + /* performance setting */ + { DDRC_ODTCFG(0), 0x0b060908 }, + { DDRC_ODTMAP(0), 0x00000000 }, + { DDRC_SCHED(0), 0x29511505 }, + { DDRC_SCHED1(0), 0x0000002c }, + { DDRC_PERFHPR1(0), 0x5900575b }, + /* 150T starve and 0x90 max tran len */ + { DDRC_PERFLPR1(0), 0x90000096 }, + /* 300T starve and 0x10 max tran len */ + { DDRC_PERFWR1(0), 0x1000012c }, + { DDRC_DBG0(0), 0x00000016 }, + { DDRC_DBG1(0), 0x00000000 }, + { DDRC_DBGCMD(0), 0x00000000 }, + { DDRC_SWCTL(0), 0x00000001 }, + { DDRC_POISONCFG(0), 0x00000011 }, + { DDRC_PCCFG(0), 0x00000111 }, + { DDRC_PCFGR_0(0), 0x000010f3 }, + { DDRC_PCFGW_0(0), 0x000072ff }, + { DDRC_PCTRL_0(0), 0x00000001 }, + /* disable Read Qos*/ + { DDRC_PCFGQOS0_0(0), 0x00000e00 }, + { DDRC_PCFGQOS1_0(0), 0x0062ffff }, + /* disable Write Qos*/ + { DDRC_PCFGWQOS0_0(0), 0x00000e00 }, + { DDRC_PCFGWQOS1_0(0), 0x0000ffff }, + { DDRC_FREQ1_DERATEEN(0), 0x00000202 }, + { DDRC_FREQ1_DERATEINT(0), 0xec78f4b5 }, + { DDRC_FREQ1_RFSHCTL0(0), 0x00618040 }, + { DDRC_FREQ1_RFSHTMG(0), 0x00610090 }, +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param lpddr4_ddrphy_cfg[] = { + { 0x20110, 0x02 }, /* MapCAB0toDFI */ + { 0x20111, 0x03 }, /* MapCAB1toDFI */ + { 0x20112, 0x04 }, /* MapCAB2toDFI */ + { 0x20113, 0x05 }, /* MapCAB3toDFI */ + { 0x20114, 0x00 }, /* MapCAB4toDFI */ + { 0x20115, 0x01 }, /* MapCAB5toDFI */ + + /* Initialize PHY Configuration */ + { 0x1005f, 0x1ff }, + { 0x1015f, 0x1ff }, + { 0x1105f, 0x1ff }, + { 0x1115f, 0x1ff }, + { 0x1205f, 0x1ff }, + { 0x1215f, 0x1ff }, + { 0x1305f, 0x1ff }, + { 0x1315f, 0x1ff }, + + { 0x11005f, 0x1ff }, + { 0x11015f, 0x1ff }, + { 0x11105f, 0x1ff }, + { 0x11115f, 0x1ff }, + { 0x11205f, 0x1ff }, + { 0x11215f, 0x1ff }, + { 0x11305f, 0x1ff }, + { 0x11315f, 0x1ff }, + + { 0x21005f, 0x1ff }, + { 0x21015f, 0x1ff }, + { 0x21105f, 0x1ff }, + { 0x21115f, 0x1ff }, + { 0x21205f, 0x1ff }, + { 0x21215f, 0x1ff }, + { 0x21305f, 0x1ff }, + { 0x21315f, 0x1ff }, + + { 0x55, 0x1ff }, + { 0x1055, 0x1ff }, + { 0x2055, 0x1ff }, + { 0x3055, 0x1ff }, + { 0x4055, 0x1ff }, + { 0x5055, 0x1ff }, + { 0x6055, 0x1ff }, + { 0x7055, 0x1ff }, + { 0x8055, 0x1ff }, + { 0x9055, 0x1ff }, + { 0x200c5, 0x19 }, + { 0x1200c5, 0x7 }, + { 0x2200c5, 0x7 }, + { 0x2002e, 0x2 }, + { 0x12002e, 0x1 }, + { 0x22002e, 0x2 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + + { 0x20024, 0xe3 }, + { 0x2003a, 0x2 }, + { 0x120024, 0xa3 }, + { 0x2003a, 0x2 }, + { 0x220024, 0xa3 }, + { 0x2003a, 0x2 }, + + { 0x20056, 0x3 }, + { 0x120056, 0xa }, + { 0x220056, 0xa }, + + { 0x1004d, 0xe00 }, + { 0x1014d, 0xe00 }, + { 0x1104d, 0xe00 }, + { 0x1114d, 0xe00 }, + { 0x1204d, 0xe00 }, + { 0x1214d, 0xe00 }, + { 0x1304d, 0xe00 }, + { 0x1314d, 0xe00 }, + { 0x11004d, 0xe00 }, + { 0x11014d, 0xe00 }, + { 0x11104d, 0xe00 }, + { 0x11114d, 0xe00 }, + { 0x11204d, 0xe00 }, + { 0x11214d, 0xe00 }, + { 0x11304d, 0xe00 }, + { 0x11314d, 0xe00 }, + { 0x21004d, 0xe00 }, + { 0x21014d, 0xe00 }, + { 0x21104d, 0xe00 }, + { 0x21114d, 0xe00 }, + { 0x21204d, 0xe00 }, + { 0x21214d, 0xe00 }, + { 0x21304d, 0xe00 }, + { 0x21314d, 0xe00 }, + + { 0x10049, 0xfbe }, + { 0x10149, 0xfbe }, + { 0x11049, 0xfbe }, + { 0x11149, 0xfbe }, + { 0x12049, 0xfbe }, + { 0x12149, 0xfbe }, + { 0x13049, 0xfbe }, + { 0x13149, 0xfbe }, + + { 0x110049, 0xfbe }, + { 0x110149, 0xfbe }, + { 0x111049, 0xfbe }, + { 0x111149, 0xfbe }, + { 0x112049, 0xfbe }, + { 0x112149, 0xfbe }, + { 0x113049, 0xfbe }, + { 0x113149, 0xfbe }, + + { 0x210049, 0xfbe }, + { 0x210149, 0xfbe }, + { 0x211049, 0xfbe }, + { 0x211149, 0xfbe }, + { 0x212049, 0xfbe }, + { 0x212149, 0xfbe }, + { 0x213049, 0xfbe }, + { 0x213149, 0xfbe }, + + { 0x43, 0x63 }, + { 0x1043, 0x63 }, + { 0x2043, 0x63 }, + { 0x3043, 0x63 }, + { 0x4043, 0x63 }, + { 0x5043, 0x63 }, + { 0x6043, 0x63 }, + { 0x7043, 0x63 }, + { 0x8043, 0x63 }, + { 0x9043, 0x63 }, + + { 0x20018, 0x3 }, + { 0x20075, 0x4 }, + { 0x20050, 0x0 }, + { 0x20008, 0x320 }, + { 0x120008, 0xa7 }, + { 0x220008, 0x19 }, + { 0x20088, 0x9 }, + { 0x200b2, 0x104 }, + { 0x10043, 0x5a1 }, + { 0x10143, 0x5a1 }, + { 0x11043, 0x5a1 }, + { 0x11143, 0x5a1 }, + { 0x12043, 0x5a1 }, + { 0x12143, 0x5a1 }, + { 0x13043, 0x5a1 }, + { 0x13143, 0x5a1 }, + { 0x1200b2, 0x104 }, + { 0x110043, 0x5a1 }, + { 0x110143, 0x5a1 }, + { 0x111043, 0x5a1 }, + { 0x111143, 0x5a1 }, + { 0x112043, 0x5a1 }, + { 0x112143, 0x5a1 }, + { 0x113043, 0x5a1 }, + { 0x113143, 0x5a1 }, + { 0x2200b2, 0x104 }, + { 0x210043, 0x5a1 }, + { 0x210143, 0x5a1 }, + { 0x211043, 0x5a1 }, + { 0x211143, 0x5a1 }, + { 0x212043, 0x5a1 }, + { 0x212143, 0x5a1 }, + { 0x213043, 0x5a1 }, + { 0x213143, 0x5a1 }, + { 0x200fa, 0x1 }, + { 0x1200fa, 0x1 }, + { 0x2200fa, 0x1 }, + { 0x20019, 0x1 }, + { 0x120019, 0x1 }, + { 0x220019, 0x1 }, + { 0x200f0, 0x600 }, + { 0x200f1, 0x0 }, + { 0x200f2, 0x4444 }, + { 0x200f3, 0x8888 }, + { 0x200f4, 0x5655 }, + { 0x200f5, 0x0 }, + { 0x200f6, 0x0 }, + { 0x200f7, 0xf000 }, + { 0x20025, 0x0 }, + { 0x2002d, 0x0 }, + { 0x12002d, 0x0 }, + { 0x22002d, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +static struct dram_cfg_param lpddr4_fsp0_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x131f }, + { 0x54009, LPDDR4_HDT_CTL_3200_1D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_1d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0xd400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, +}; + +/* P1 message block paremeter for training firmware */ +static struct dram_cfg_param lpddr4_fsp1_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x1 }, + { 0x54003, 0x29c }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x121f }, + { 0x54009, 0xc8 }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, 0x0 }, + { 0x5400e, 0x0 }, + { 0x5400f, 0x0 }, + { 0x54010, 0x0 }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54019, 0x914 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401e, 0x6 }, + { 0x5401f, 0x914 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x1) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0x1400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x09 }, + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, 0x600 }, + { 0x54038, 0x1400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x1) << 8) | 0x09 }, + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0xd0000, 0x1 }, + +}; + +/* P0 2D message block paremeter for training firmware */ +static struct dram_cfg_param lpddr4_fsp0_2d_cfg[] = { + { 0xd0000, 0x0 }, + { 0x54000, 0x0 }, + { 0x54001, 0x0 }, + { 0x54002, 0x0 }, + { 0x54003, 0xc80 }, + { 0x54004, 0x2 }, + { 0x54005, ((LPDDR4_PHY_RON << 8) | LPDDR4_PHY_RTT) }, + { 0x54006, LPDDR4_PHY_VREF_VALUE }, + { 0x54007, 0x0 }, + { 0x54008, 0x61 }, + { 0x54009, LPDDR4_HDT_CTL_2D }, + { 0x5400a, 0x0 }, + { 0x5400b, 0x2 }, + { 0x5400c, 0x0 }, + { 0x5400d, (LPDDR4_CATRAIN_3200_2d << 8) }, + { 0x5400e, 0x0 }, + { 0x5400f, (LPDDR4_2D_SHARE << 8) | 0x00 }, + { 0x54010, LPDDR4_2D_WEIGHT }, + { 0x54011, 0x0 }, + { 0x54012, 0x310 }, + { 0x54013, 0x0 }, + { 0x54014, 0x0 }, + { 0x54015, 0x0 }, + { 0x54016, 0x0 }, + { 0x54017, 0x0 }, + { 0x54018, 0x0 }, + { 0x54024, 0x5 }, + { 0x54019, 0x2dd4 }, + { 0x5401a, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x5401b, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) }, + { 0x5401c, ((LPDDR4_VREF_VALUE_DQ_RANK0 << 8) | 0x08) }, + { 0x5401d, 0x0 }, + { 0x5401e, LPDDR4_MR22_RANK0 }, + { 0x5401f, 0x2dd4 }, + { 0x54020, (((LPDDR4_RON) << 3) | 0x3) }, + { 0x54021, ((LPDDR4_VREF_VALUE_CA << 8) | + (LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) }, + { 0x54022, ((LPDDR4_VREF_VALUE_DQ_RANK1 << 8) | 0x08) }, + { 0x54023, 0x0 }, + { 0x54024, LPDDR4_MR22_RANK1 }, + { 0x54025, 0x0 }, + { 0x54026, 0x0 }, + { 0x54027, 0x0 }, + { 0x54028, 0x0 }, + { 0x54029, 0x0 }, + { 0x5402a, 0x0 }, + { 0x5402b, 0x1000 }, + { 0x5402c, 0x3 }, + { 0x5402d, 0x0 }, + { 0x5402e, 0x0 }, + { 0x5402f, 0x0 }, + { 0x54030, 0x0 }, + { 0x54031, 0x0 }, + { 0x54032, 0xd400 }, + { 0x54033, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x54034, (((LPDDR4_RTT_CA_BANK0 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x54035, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x54036, LPDDR4_VREF_VALUE_DQ_RANK0 }, + { 0x54037, (LPDDR4_MR22_RANK0 << 8) }, + { 0x54038, 0xd400 }, + { 0x54039, ((((LPDDR4_RON) << 3) | 0x3) << 8) | 0x2d }, + { 0x5403a, (((LPDDR4_RTT_CA_BANK1 << 4) | LPDDR4_RTT_DQ) << 8) }, + { 0x5403b, (0x0800 | LPDDR4_VREF_VALUE_CA) }, + { 0x5403c, LPDDR4_VREF_VALUE_DQ_RANK1 }, + { 0x5403d, (LPDDR4_MR22_RANK1 << 8) }, + { 0x5403e, 0x0 }, + { 0x5403f, 0x0 }, + { 0x54040, 0x0 }, + { 0x54041, 0x0 }, + { 0x54042, 0x0 }, + { 0x54043, 0x0 }, + { 0x54044, 0x0 }, + { 0xd0000, 0x1 }, + +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param lpddr4_phy_pie[] = { + { 0xd0000, 0x0 }, + { 0x90000, 0x10 }, + { 0x90001, 0x400 }, + { 0x90002, 0x10e }, + { 0x90003, 0x0 }, + { 0x90004, 0x0 }, + { 0x90005, 0x8 }, + { 0x90029, 0xb }, + { 0x9002a, 0x480 }, + { 0x9002b, 0x109 }, + { 0x9002c, 0x8 }, + { 0x9002d, 0x448 }, + { 0x9002e, 0x139 }, + { 0x9002f, 0x8 }, + { 0x90030, 0x478 }, + { 0x90031, 0x109 }, + { 0x90032, 0x0 }, + { 0x90033, 0xe8 }, + { 0x90034, 0x109 }, + { 0x90035, 0x2 }, + { 0x90036, 0x10 }, + { 0x90037, 0x139 }, + { 0x90038, 0xb }, + { 0x90039, 0x7c0 }, + { 0x9003a, 0x139 }, + { 0x9003b, 0x44 }, + { 0x9003c, 0x630 }, + { 0x9003d, 0x159 }, + { 0x9003e, 0x14f }, + { 0x9003f, 0x630 }, + { 0x90040, 0x159 }, + { 0x90041, 0x47 }, + { 0x90042, 0x630 }, + { 0x90043, 0x149 }, + { 0x90044, 0x4f }, + { 0x90045, 0x630 }, + { 0x90046, 0x179 }, + { 0x90047, 0x8 }, + { 0x90048, 0xe0 }, + { 0x90049, 0x109 }, + { 0x9004a, 0x0 }, + { 0x9004b, 0x7c8 }, + { 0x9004c, 0x109 }, + { 0x9004d, 0x0 }, + { 0x9004e, 0x1 }, + { 0x9004f, 0x8 }, + { 0x90050, 0x0 }, + { 0x90051, 0x45a }, + { 0x90052, 0x9 }, + { 0x90053, 0x0 }, + { 0x90054, 0x448 }, + { 0x90055, 0x109 }, + { 0x90056, 0x40 }, + { 0x90057, 0x630 }, + { 0x90058, 0x179 }, + { 0x90059, 0x1 }, + { 0x9005a, 0x618 }, + { 0x9005b, 0x109 }, + { 0x9005c, 0x40c0 }, + { 0x9005d, 0x630 }, + { 0x9005e, 0x149 }, + { 0x9005f, 0x8 }, + { 0x90060, 0x4 }, + { 0x90061, 0x48 }, + { 0x90062, 0x4040 }, + { 0x90063, 0x630 }, + { 0x90064, 0x149 }, + { 0x90065, 0x0 }, + { 0x90066, 0x4 }, + { 0x90067, 0x48 }, + { 0x90068, 0x40 }, + { 0x90069, 0x630 }, + { 0x9006a, 0x149 }, + { 0x9006b, 0x10 }, + { 0x9006c, 0x4 }, + { 0x9006d, 0x18 }, + { 0x9006e, 0x0 }, + { 0x9006f, 0x4 }, + { 0x90070, 0x78 }, + { 0x90071, 0x549 }, + { 0x90072, 0x630 }, + { 0x90073, 0x159 }, + { 0x90074, 0xd49 }, + { 0x90075, 0x630 }, + { 0x90076, 0x159 }, + { 0x90077, 0x94a }, + { 0x90078, 0x630 }, + { 0x90079, 0x159 }, + { 0x9007a, 0x441 }, + { 0x9007b, 0x630 }, + { 0x9007c, 0x149 }, + { 0x9007d, 0x42 }, + { 0x9007e, 0x630 }, + { 0x9007f, 0x149 }, + { 0x90080, 0x1 }, + { 0x90081, 0x630 }, + { 0x90082, 0x149 }, + { 0x90083, 0x0 }, + { 0x90084, 0xe0 }, + { 0x90085, 0x109 }, + { 0x90086, 0xa }, + { 0x90087, 0x10 }, + { 0x90088, 0x109 }, + { 0x90089, 0x9 }, + { 0x9008a, 0x3c0 }, + { 0x9008b, 0x149 }, + { 0x9008c, 0x9 }, + { 0x9008d, 0x3c0 }, + { 0x9008e, 0x159 }, + { 0x9008f, 0x18 }, + { 0x90090, 0x10 }, + { 0x90091, 0x109 }, + { 0x90092, 0x0 }, + { 0x90093, 0x3c0 }, + { 0x90094, 0x109 }, + { 0x90095, 0x18 }, + { 0x90096, 0x4 }, + { 0x90097, 0x48 }, + { 0x90098, 0x18 }, + { 0x90099, 0x4 }, + { 0x9009a, 0x58 }, + { 0x9009b, 0xa }, + { 0x9009c, 0x10 }, + { 0x9009d, 0x109 }, + { 0x9009e, 0x2 }, + { 0x9009f, 0x10 }, + { 0x900a0, 0x109 }, + { 0x900a1, 0x5 }, + { 0x900a2, 0x7c0 }, + { 0x900a3, 0x109 }, + { 0x900a4, 0xd }, + { 0x900a5, 0x7c0 }, + { 0x900a6, 0x109 }, + { 0x900a7, 0x4 }, + { 0x900a8, 0x7c0 }, + { 0x900a9, 0x109 }, + { 0x40000, 0x811 }, + { 0x40020, 0x880 }, + { 0x40040, 0x0 }, + { 0x40060, 0x0 }, + { 0x40001, 0x4008 }, + { 0x40021, 0x83 }, + { 0x40041, 0x4f }, + { 0x40061, 0x0 }, + { 0x40002, 0x4040 }, + { 0x40022, 0x83 }, + { 0x40042, 0x51 }, + { 0x40062, 0x0 }, + { 0x40003, 0x811 }, + { 0x40023, 0x880 }, + { 0x40043, 0x0 }, + { 0x40063, 0x0 }, + { 0x40004, 0x720 }, + { 0x40024, 0xf }, + { 0x40044, 0x1740 }, + { 0x40064, 0x0 }, + { 0x40005, 0x16 }, + { 0x40025, 0x83 }, + { 0x40045, 0x4b }, + { 0x40065, 0x0 }, + { 0x40006, 0x716 }, + { 0x40026, 0xf }, + { 0x40046, 0x2001 }, + { 0x40066, 0x0 }, + { 0x40007, 0x716 }, + { 0x40027, 0xf }, + { 0x40047, 0x2800 }, + { 0x40067, 0x0 }, + { 0x40008, 0x716 }, + { 0x40028, 0xf }, + { 0x40048, 0xf00 }, + { 0x40068, 0x0 }, + { 0x40009, 0x720 }, + { 0x40029, 0xf }, + { 0x40049, 0x1400 }, + { 0x40069, 0x0 }, + { 0x4000a, 0xe08 }, + { 0x4002a, 0xc15 }, + { 0x4004a, 0x0 }, + { 0x4006a, 0x0 }, + { 0x4000b, 0x623 }, + { 0x4002b, 0x15 }, + { 0x4004b, 0x0 }, + { 0x4006b, 0x0 }, + { 0x4000c, 0x4028 }, + { 0x4002c, 0x80 }, + { 0x4004c, 0x0 }, + { 0x4006c, 0x0 }, + { 0x4000d, 0xe08 }, + { 0x4002d, 0xc1a }, + { 0x4004d, 0x0 }, + { 0x4006d, 0x0 }, + { 0x4000e, 0x623 }, + { 0x4002e, 0x1a }, + { 0x4004e, 0x0 }, + { 0x4006e, 0x0 }, + { 0x4000f, 0x4040 }, + { 0x4002f, 0x80 }, + { 0x4004f, 0x0 }, + { 0x4006f, 0x0 }, + { 0x40010, 0x2604 }, + { 0x40030, 0x15 }, + { 0x40050, 0x0 }, + { 0x40070, 0x0 }, + { 0x40011, 0x708 }, + { 0x40031, 0x5 }, + { 0x40051, 0x0 }, + { 0x40071, 0x2002 }, + { 0x40012, 0x8 }, + { 0x40032, 0x80 }, + { 0x40052, 0x0 }, + { 0x40072, 0x0 }, + { 0x40013, 0x2604 }, + { 0x40033, 0x1a }, + { 0x40053, 0x0 }, + { 0x40073, 0x0 }, + { 0x40014, 0x708 }, + { 0x40034, 0xa }, + { 0x40054, 0x0 }, + { 0x40074, 0x2002 }, + { 0x40015, 0x4040 }, + { 0x40035, 0x80 }, + { 0x40055, 0x0 }, + { 0x40075, 0x0 }, + { 0x40016, 0x60a }, + { 0x40036, 0x15 }, + { 0x40056, 0x1200 }, + { 0x40076, 0x0 }, + { 0x40017, 0x61a }, + { 0x40037, 0x15 }, + { 0x40057, 0x1300 }, + { 0x40077, 0x0 }, + { 0x40018, 0x60a }, + { 0x40038, 0x1a }, + { 0x40058, 0x1200 }, + { 0x40078, 0x0 }, + { 0x40019, 0x642 }, + { 0x40039, 0x1a }, + { 0x40059, 0x1300 }, + { 0x40079, 0x0 }, + { 0x4001a, 0x4808 }, + { 0x4003a, 0x880 }, + { 0x4005a, 0x0 }, + { 0x4007a, 0x0 }, + { 0x900aa, 0x0 }, + { 0x900ab, 0x790 }, + { 0x900ac, 0x11a }, + { 0x900ad, 0x8 }, + { 0x900ae, 0x7aa }, + { 0x900af, 0x2a }, + { 0x900b0, 0x10 }, + { 0x900b1, 0x7b2 }, + { 0x900b2, 0x2a }, + { 0x900b3, 0x0 }, + { 0x900b4, 0x7c8 }, + { 0x900b5, 0x109 }, + { 0x900b6, 0x10 }, + { 0x900b7, 0x10 }, + { 0x900b8, 0x109 }, + { 0x900b9, 0x10 }, + { 0x900ba, 0x2a8 }, + { 0x900bb, 0x129 }, + { 0x900bc, 0x8 }, + { 0x900bd, 0x370 }, + { 0x900be, 0x129 }, + { 0x900bf, 0xa }, + { 0x900c0, 0x3c8 }, + { 0x900c1, 0x1a9 }, + { 0x900c2, 0xc }, + { 0x900c3, 0x408 }, + { 0x900c4, 0x199 }, + { 0x900c5, 0x14 }, + { 0x900c6, 0x790 }, + { 0x900c7, 0x11a }, + { 0x900c8, 0x8 }, + { 0x900c9, 0x4 }, + { 0x900ca, 0x18 }, + { 0x900cb, 0xe }, + { 0x900cc, 0x408 }, + { 0x900cd, 0x199 }, + { 0x900ce, 0x8 }, + { 0x900cf, 0x8568 }, + { 0x900d0, 0x108 }, + { 0x900d1, 0x18 }, + { 0x900d2, 0x790 }, + { 0x900d3, 0x16a }, + { 0x900d4, 0x8 }, + { 0x900d5, 0x1d8 }, + { 0x900d6, 0x169 }, + { 0x900d7, 0x10 }, + { 0x900d8, 0x8558 }, + { 0x900d9, 0x168 }, + { 0x900da, 0x70 }, + { 0x900db, 0x788 }, + { 0x900dc, 0x16a }, + { 0x900dd, 0x1ff8 }, + { 0x900de, 0x85a8 }, + { 0x900df, 0x1e8 }, + { 0x900e0, 0x50 }, + { 0x900e1, 0x798 }, + { 0x900e2, 0x16a }, + { 0x900e3, 0x60 }, + { 0x900e4, 0x7a0 }, + { 0x900e5, 0x16a }, + { 0x900e6, 0x8 }, + { 0x900e7, 0x8310 }, + { 0x900e8, 0x168 }, + { 0x900e9, 0x8 }, + { 0x900ea, 0xa310 }, + { 0x900eb, 0x168 }, + { 0x900ec, 0xa }, + { 0x900ed, 0x408 }, + { 0x900ee, 0x169 }, + { 0x900ef, 0x6e }, + { 0x900f0, 0x0 }, + { 0x900f1, 0x68 }, + { 0x900f2, 0x0 }, + { 0x900f3, 0x408 }, + { 0x900f4, 0x169 }, + { 0x900f5, 0x0 }, + { 0x900f6, 0x8310 }, + { 0x900f7, 0x168 }, + { 0x900f8, 0x0 }, + { 0x900f9, 0xa310 }, + { 0x900fa, 0x168 }, + { 0x900fb, 0x1ff8 }, + { 0x900fc, 0x85a8 }, + { 0x900fd, 0x1e8 }, + { 0x900fe, 0x68 }, + { 0x900ff, 0x798 }, + { 0x90100, 0x16a }, + { 0x90101, 0x78 }, + { 0x90102, 0x7a0 }, + { 0x90103, 0x16a }, + { 0x90104, 0x68 }, + { 0x90105, 0x790 }, + { 0x90106, 0x16a }, + { 0x90107, 0x8 }, + { 0x90108, 0x8b10 }, + { 0x90109, 0x168 }, + { 0x9010a, 0x8 }, + { 0x9010b, 0xab10 }, + { 0x9010c, 0x168 }, + { 0x9010d, 0xa }, + { 0x9010e, 0x408 }, + { 0x9010f, 0x169 }, + { 0x90110, 0x58 }, + { 0x90111, 0x0 }, + { 0x90112, 0x68 }, + { 0x90113, 0x0 }, + { 0x90114, 0x408 }, + { 0x90115, 0x169 }, + { 0x90116, 0x0 }, + { 0x90117, 0x8b10 }, + { 0x90118, 0x168 }, + { 0x90119, 0x0 }, + { 0x9011a, 0xab10 }, + { 0x9011b, 0x168 }, + { 0x9011c, 0x0 }, + { 0x9011d, 0x1d8 }, + { 0x9011e, 0x169 }, + { 0x9011f, 0x80 }, + { 0x90120, 0x790 }, + { 0x90121, 0x16a }, + { 0x90122, 0x18 }, + { 0x90123, 0x7aa }, + { 0x90124, 0x6a }, + { 0x90125, 0xa }, + { 0x90126, 0x0 }, + { 0x90127, 0x1e9 }, + { 0x90128, 0x8 }, + { 0x90129, 0x8080 }, + { 0x9012a, 0x108 }, + { 0x9012b, 0xf }, + { 0x9012c, 0x408 }, + { 0x9012d, 0x169 }, + { 0x9012e, 0xc }, + { 0x9012f, 0x0 }, + { 0x90130, 0x68 }, + { 0x90131, 0x9 }, + { 0x90132, 0x0 }, + { 0x90133, 0x1a9 }, + { 0x90134, 0x0 }, + { 0x90135, 0x408 }, + { 0x90136, 0x169 }, + { 0x90137, 0x0 }, + { 0x90138, 0x8080 }, + { 0x90139, 0x108 }, + { 0x9013a, 0x8 }, + { 0x9013b, 0x7aa }, + { 0x9013c, 0x6a }, + { 0x9013d, 0x0 }, + { 0x9013e, 0x8568 }, + { 0x9013f, 0x108 }, + { 0x90140, 0xb7 }, + { 0x90141, 0x790 }, + { 0x90142, 0x16a }, + { 0x90143, 0x1f }, + { 0x90144, 0x0 }, + { 0x90145, 0x68 }, + { 0x90146, 0x8 }, + { 0x90147, 0x8558 }, + { 0x90148, 0x168 }, + { 0x90149, 0xf }, + { 0x9014a, 0x408 }, + { 0x9014b, 0x169 }, + { 0x9014c, 0xc }, + { 0x9014d, 0x0 }, + { 0x9014e, 0x68 }, + { 0x9014f, 0x0 }, + { 0x90150, 0x408 }, + { 0x90151, 0x169 }, + { 0x90152, 0x0 }, + { 0x90153, 0x8558 }, + { 0x90154, 0x168 }, + { 0x90155, 0x8 }, + { 0x90156, 0x3c8 }, + { 0x90157, 0x1a9 }, + { 0x90158, 0x3 }, + { 0x90159, 0x370 }, + { 0x9015a, 0x129 }, + { 0x9015b, 0x20 }, + { 0x9015c, 0x2aa }, + { 0x9015d, 0x9 }, + { 0x9015e, 0x0 }, + { 0x9015f, 0x400 }, + { 0x90160, 0x10e }, + { 0x90161, 0x8 }, + { 0x90162, 0xe8 }, + { 0x90163, 0x109 }, + { 0x90164, 0x0 }, + { 0x90165, 0x8140 }, + { 0x90166, 0x10c }, + { 0x90167, 0x10 }, + { 0x90168, 0x8138 }, + { 0x90169, 0x10c }, + { 0x9016a, 0x8 }, + { 0x9016b, 0x7c8 }, + { 0x9016c, 0x101 }, + { 0x9016d, 0x8 }, + { 0x9016e, 0x0 }, + { 0x9016f, 0x8 }, + { 0x90170, 0x8 }, + { 0x90171, 0x448 }, + { 0x90172, 0x109 }, + { 0x90173, 0xf }, + { 0x90174, 0x7c0 }, + { 0x90175, 0x109 }, + { 0x90176, 0x0 }, + { 0x90177, 0xe8 }, + { 0x90178, 0x109 }, + { 0x90179, 0x47 }, + { 0x9017a, 0x630 }, + { 0x9017b, 0x109 }, + { 0x9017c, 0x8 }, + { 0x9017d, 0x618 }, + { 0x9017e, 0x109 }, + { 0x9017f, 0x8 }, + { 0x90180, 0xe0 }, + { 0x90181, 0x109 }, + { 0x90182, 0x0 }, + { 0x90183, 0x7c8 }, + { 0x90184, 0x109 }, + { 0x90185, 0x8 }, + { 0x90186, 0x8140 }, + { 0x90187, 0x10c }, + { 0x90188, 0x0 }, + { 0x90189, 0x1 }, + { 0x9018a, 0x8 }, + { 0x9018b, 0x8 }, + { 0x9018c, 0x4 }, + { 0x9018d, 0x8 }, + { 0x9018e, 0x8 }, + { 0x9018f, 0x7c8 }, + { 0x90190, 0x101 }, + { 0x90006, 0x0 }, + { 0x90007, 0x0 }, + { 0x90008, 0x8 }, + { 0x90009, 0x0 }, + { 0x9000a, 0x0 }, + { 0x9000b, 0x0 }, + { 0xd00e7, 0x400 }, + { 0x90017, 0x0 }, + { 0x9001f, 0x2b }, + { 0x90026, 0x6c }, + { 0x400d0, 0x0 }, + { 0x400d1, 0x101 }, + { 0x400d2, 0x105 }, + { 0x400d3, 0x107 }, + { 0x400d4, 0x10f }, + { 0x400d5, 0x202 }, + { 0x400d6, 0x20a }, + { 0x400d7, 0x20b }, + { 0x2003a, 0x2 }, + { 0x2000b, 0x64 }, + { 0x2000c, 0xc8 }, + { 0x2000d, 0x7d0 }, + { 0x2000e, 0x2c }, + { 0x12000b, 0x14 }, + { 0x12000c, 0x29 }, + { 0x12000d, 0x1a1 }, + { 0x12000e, 0x10 }, + { 0x22000b, 0x3 }, + { 0x22000c, 0x6 }, + { 0x22000d, 0x3e }, + { 0x22000e, 0x10 }, + { 0x9000c, 0x0 }, + { 0x9000d, 0x173 }, + { 0x9000e, 0x60 }, + { 0x9000f, 0x6110 }, + { 0x90010, 0x2152 }, + { 0x90011, 0xdfbd }, + { 0x90012, 0x60 }, + { 0x90013, 0x6152 }, + { 0x20010, 0x5a }, + { 0x20011, 0x3 }, + { 0x40080, 0xe0 }, + { 0x40081, 0x12 }, + { 0x40082, 0xe0 }, + { 0x40083, 0x12 }, + { 0x40084, 0xe0 }, + { 0x40085, 0x12 }, + { 0x140080, 0xe0 }, + { 0x140081, 0x12 }, + { 0x140082, 0xe0 }, + { 0x140083, 0x12 }, + { 0x140084, 0xe0 }, + { 0x140085, 0x12 }, + { 0x240080, 0xe0 }, + { 0x240081, 0x12 }, + { 0x240082, 0xe0 }, + { 0x240083, 0x12 }, + { 0x240084, 0xe0 }, + { 0x240085, 0x12 }, + { 0x400fd, 0xf }, + { 0x10011, 0x1 }, + { 0x10012, 0x1 }, + { 0x10013, 0x180 }, + { 0x10018, 0x1 }, + { 0x10002, 0x6209 }, + { 0x100b2, 0x1 }, + { 0x101b4, 0x1 }, + { 0x102b4, 0x1 }, + { 0x103b4, 0x1 }, + { 0x104b4, 0x1 }, + { 0x105b4, 0x1 }, + { 0x106b4, 0x1 }, + { 0x107b4, 0x1 }, + { 0x108b4, 0x1 }, + { 0x11011, 0x1 }, + { 0x11012, 0x1 }, + { 0x11013, 0x180 }, + { 0x11018, 0x1 }, + { 0x11002, 0x6209 }, + { 0x110b2, 0x1 }, + { 0x111b4, 0x1 }, + { 0x112b4, 0x1 }, + { 0x113b4, 0x1 }, + { 0x114b4, 0x1 }, + { 0x115b4, 0x1 }, + { 0x116b4, 0x1 }, + { 0x117b4, 0x1 }, + { 0x118b4, 0x1 }, + { 0x12011, 0x1 }, + { 0x12012, 0x1 }, + { 0x12013, 0x180 }, + { 0x12018, 0x1 }, + { 0x12002, 0x6209 }, + { 0x120b2, 0x1 }, + { 0x121b4, 0x1 }, + { 0x122b4, 0x1 }, + { 0x123b4, 0x1 }, + { 0x124b4, 0x1 }, + { 0x125b4, 0x1 }, + { 0x126b4, 0x1 }, + { 0x127b4, 0x1 }, + { 0x128b4, 0x1 }, + { 0x13011, 0x1 }, + { 0x13012, 0x1 }, + { 0x13013, 0x180 }, + { 0x13018, 0x1 }, + { 0x13002, 0x6209 }, + { 0x130b2, 0x1 }, + { 0x131b4, 0x1 }, + { 0x132b4, 0x1 }, + { 0x133b4, 0x1 }, + { 0x134b4, 0x1 }, + { 0x135b4, 0x1 }, + { 0x136b4, 0x1 }, + { 0x137b4, 0x1 }, + { 0x138b4, 0x1 }, + { 0x20089, 0x1 }, + { 0x20088, 0x19 }, + { 0xc0080, 0x2 }, + { 0xd0000, 0x1 }, +}; + +static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = { + { + /* P0 3200mts 1D */ + .drate = 3200, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg), + }, + { + /* P1 667mts 1D */ + .drate = 667, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = lpddr4_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp1_cfg), + }, + { + /* P0 3200mts 2D */ + .drate = 3200, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = lpddr4_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg), + }, +}; + +/* lpddr4 timing config params on EVK board */ +struct dram_timing_info dram_timing_b0 = { + .ddrc_cfg = lpddr4_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(lpddr4_ddrc_cfg), + .ddrphy_cfg = lpddr4_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(lpddr4_ddrphy_cfg), + .fsp_msg = lpddr4_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(lpddr4_dram_fsp_msg), + .ddrphy_pie = lpddr4_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(lpddr4_phy_pie), + /* + * this table must be initialized if DDRPHY bypass mode is + * not used: all fsp drate > 666MTS. + */ + .fsp_table = { 3200, 667, }, +}; diff --git a/board/freescale/imx8mq_evk/spl.c b/board/freescale/imx8mq_evk/spl.c new file mode 100644 index 0000000000..e6cbc34b0d --- /dev/null +++ b/board/freescale/imx8mq_evk/spl.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/imx8mq_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/gpio.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <power/pmic.h> +#include <power/pfuze100_pmic.h> +#include <spl.h> +#include "../common/pfuze.h" + +DECLARE_GLOBAL_DATA_PTR; + +extern struct dram_timing_info dram_timing_b0; + +void spl_dram_init(void) +{ + /* ddr init */ + if ((get_cpu_rev() & 0xfff) == CHIP_REV_2_1) + ddr_init(&dram_timing); + else + ddr_init(&dram_timing_b0); +} + +#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC, + .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC, + .gp = IMX_GPIO_NR(5, 14), + }, + .sda = { + .i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC, + .gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC, + .gp = IMX_GPIO_NR(5, 15), + }, +}; + +#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 12) +#define USDHC1_PWR_GPIO IMX_GPIO_NR(2, 10) +#define USDHC2_PWR_GPIO IMX_GPIO_NR(2, 19) + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = 1; + break; + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + return ret; + } + + return 1; +} + +#define USDHC_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | \ + PAD_CTL_FSEL2) +#define USDHC_GPIO_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_DSE1) + +static iomux_v3_cfg_t const usdhc1_pads[] = { + IMX8MQ_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA4__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA5__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA6__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_DATA7__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc2_pads[] = { + IMX8MQ_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0x16 */ + IMX8MQ_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* 0xd6 */ + IMX8MQ_PAD_SD2_CD_B__GPIO2_IO12 | MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), + IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19 | MUX_PAD_CTRL(USDHC_GPIO_PAD_CTRL), +}; + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC1_BASE_ADDR, 0, 8}, + {USDHC2_BASE_ADDR, 0, 4}, +}; + +int board_mmc_init(bd_t *bis) +{ + int i, ret; + /* + * According to the board_mmc_init() the following map is done: + * (U-Boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc1 USDHC2 + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + init_clk_usdhc(0); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(USDHC1_CLK_ROOT); + imx_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + gpio_request(USDHC1_PWR_GPIO, "usdhc1_reset"); + gpio_direction_output(USDHC1_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC1_PWR_GPIO, 1); + break; + case 1: + init_clk_usdhc(1); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(USDHC2_CLK_ROOT); + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, + ARRAY_SIZE(usdhc2_pads)); + gpio_request(USDHC2_PWR_GPIO, "usdhc2_reset"); + gpio_direction_output(USDHC2_PWR_GPIO, 0); + udelay(500); + gpio_direction_output(USDHC2_PWR_GPIO, 1); + break; + default: + printf("Warning: you configured more USDHC controllers(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} + +#ifdef CONFIG_POWER +#define I2C_PMIC 0 +int power_init_board(void) +{ + struct pmic *p; + int ret; + unsigned int reg; + + ret = power_pfuze100_init(I2C_PMIC); + if (ret) + return -ENODEV; + + p = pmic_get("PFUZE100"); + ret = pmic_probe(p); + if (ret) + return -ENODEV; + + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + pmic_reg_read(p, PFUZE100_SW3AVOL, ®); + if ((reg & 0x3f) != 0x18) { + reg &= ~0x3f; + reg |= 0x18; + pmic_reg_write(p, PFUZE100_SW3AVOL, reg); + } + + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + + /* set SW3A standby mode to off */ + pmic_reg_read(p, PFUZE100_SW3AMODE, ®); + reg &= ~0xf; + reg |= APS_OFF; + pmic_reg_write(p, PFUZE100_SW3AMODE, reg); + + return 0; +} +#endif + +void spl_board_init(void) +{ + puts("Normal Boot\n"); +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif + +void board_init_f(ulong dummy) +{ + int ret; + + /* Clear global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + arch_cpu_init(); + + init_uart_clk(0); + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + enable_tzc380(); + + /* Adjust pmic voltage to 1.0V for 800M */ + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + + power_init_board(); + + /* DDR initialization */ + spl_dram_init(); + + board_init_r(NULL, 0); +} diff --git a/board/freescale/imx8qxp_mek/imximage.cfg b/board/freescale/imx8qxp_mek/imximage.cfg index 9d39f25bf6..bbffb1a88f 100644 --- a/board/freescale/imx8qxp_mek/imximage.cfg +++ b/board/freescale/imx8qxp_mek/imximage.cfg @@ -7,7 +7,6 @@ */ #define __ASSEMBLY__ -#include <config.h> /* Boot from SD, sector size 0x400 */ BOOT_FROM SD 0x400 diff --git a/board/ge/bx50v3/Kconfig b/board/ge/bx50v3/Kconfig index 993b055930..05938560ab 100644 --- a/board/ge/bx50v3/Kconfig +++ b/board/ge/bx50v3/Kconfig @@ -15,4 +15,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "ge_bx50v3" +source "board/ge/common/Kconfig" + endif diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 245852510f..079d302fbe 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -33,20 +33,9 @@ #include "../../../drivers/net/e1000.h" DECLARE_GLOBAL_DATA_PTR; -struct vpd_cache; - static int confidx = 3; /* Default to b850v3. */ static struct vpd_cache vpd; -#ifndef CONFIG_SYS_I2C_EEPROM_ADDR -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#endif - -#ifndef CONFIG_SYS_I2C_EEPROM_BUS -#define CONFIG_SYS_I2C_EEPROM_BUS 4 -#endif - #define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ PAD_CTL_HYS) @@ -569,6 +558,7 @@ int overwrite_console(void) #define VPD_MAC_ADDRESS_LENGTH 6 struct vpd_cache { + bool is_read; u8 product_id; u8 has; unsigned char mac1[VPD_MAC_ADDRESS_LENGTH]; @@ -578,11 +568,9 @@ struct vpd_cache { /* * Extracts MAC and product information from the VPD. */ -static int vpd_callback(void *userdata, u8 id, u8 version, u8 type, +static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type, size_t size, u8 const *data) { - struct vpd_cache *vpd = (struct vpd_cache *)userdata; - if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID && size >= 1) { vpd->product_id = data[0]; @@ -606,6 +594,11 @@ static void process_vpd(struct vpd_cache *vpd) int fec_index = -1; int i210_index = -1; + if (!vpd->is_read) { + printf("VPD wasn't read"); + return; + } + switch (vpd->product_id) { case VPD_PRODUCT_B450: env_set("confidx", "1"); @@ -631,35 +624,6 @@ static void process_vpd(struct vpd_cache *vpd) eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2); } -static int read_vpd(uint eeprom_bus) -{ - int res; - int size = 1024; - uint8_t *data; - unsigned int current_i2c_bus = i2c_get_bus_num(); - - res = i2c_set_bus_num(eeprom_bus); - if (res < 0) - return res; - - data = (uint8_t *)malloc(size); - if (!data) - return -ENOMEM; - - res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, data, size); - - if (res == 0) { - memset(&vpd, 0, sizeof(vpd)); - vpd_reader(size, data, &vpd, vpd_callback); - } - - free(data); - - i2c_set_bus_num(current_i2c_bus); - return res; -} - int board_eth_init(bd_t *bis) { setup_iomux_enet(); @@ -718,9 +682,10 @@ int board_init(void) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); - read_vpd(CONFIG_SYS_I2C_EEPROM_BUS); - - set_confidx(&vpd); + if (!read_vpd(&vpd, vpd_callback)) { + vpd.is_read = true; + set_confidx(&vpd); + } gpio_direction_output(SUS_S3_OUT, 1); gpio_direction_output(WIFI_EN, 1); diff --git a/board/ge/common/Kconfig b/board/ge/common/Kconfig new file mode 100644 index 0000000000..637b264954 --- /dev/null +++ b/board/ge/common/Kconfig @@ -0,0 +1,14 @@ +config SYS_VPD_EEPROM_I2C_ADDR + hex "I2C address of the EEPROM device used for VPD" + help + VPD = Vital Product Data + +config SYS_VPD_EEPROM_I2C_BUS + int "I2C bus of the EEPROM device used for VPD." + +config SYS_VPD_EEPROM_SIZE + int "Size in bytes of the EEPROM device used for VPD" + +config SYS_VPD_EEPROM_I2C_ADDR_LEN + int "Number of bytes to use for VPD EEPROM address" + default 1 diff --git a/board/ge/common/vpd_reader.c b/board/ge/common/vpd_reader.c index c471583be8..12410d9b71 100644 --- a/board/ge/common/vpd_reader.c +++ b/board/ge/common/vpd_reader.c @@ -5,6 +5,7 @@ #include "vpd_reader.h" +#include <i2c.h> #include <linux/bch.h> #include <stdlib.h> @@ -105,9 +106,9 @@ static const size_t HEADER_BLOCK_ECC_LEN = 4; static const u8 ECC_BLOCK_ID = 0xFF; -int vpd_reader(size_t size, u8 *data, void *userdata, - int (*fn)(void *userdata, u8 id, u8 version, u8 type, - size_t size, u8 const *data)) +static int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata, + int (*fn)(struct vpd_cache *, u8 id, u8 version, u8 type, + size_t size, u8 const *data)) { if (size < HEADER_BLOCK_LEN || !data || !fn) return -EINVAL; @@ -194,3 +195,33 @@ int vpd_reader(size_t size, u8 *data, void *userdata, return ret; } } + +int read_vpd(struct vpd_cache *cache, + int (*process_block)(struct vpd_cache *, u8 id, u8 version, + u8 type, size_t size, u8 const *data)) +{ + static const size_t size = CONFIG_SYS_VPD_EEPROM_SIZE; + + int res; + u8 *data; + unsigned int current_i2c_bus = i2c_get_bus_num(); + + res = i2c_set_bus_num(CONFIG_SYS_VPD_EEPROM_I2C_BUS); + if (res < 0) + return res; + + data = malloc(size); + if (!data) + return -ENOMEM; + + res = i2c_read(CONFIG_SYS_VPD_EEPROM_I2C_ADDR, 0, + CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN, + data, size); + if (res == 0) + res = vpd_reader(size, data, cache, process_block); + + free(data); + + i2c_set_bus_num(current_i2c_bus); + return res; +} diff --git a/board/ge/common/vpd_reader.h b/board/ge/common/vpd_reader.h index e60acf3d07..3045b7e21e 100644 --- a/board/ge/common/vpd_reader.h +++ b/board/ge/common/vpd_reader.h @@ -5,12 +5,18 @@ #include "common.h" +struct vpd_cache; + /* - * Read VPD from given data, verify content, and call callback - * for each vital product data block. + * Read VPD from given data, verify content, call callback for each vital + * product data block. + * + * cache: structure used by process block to store VPD information + * process_block: callback called for each VPD data block * * Returns Non-zero on error. Negative numbers encode errno. */ -int vpd_reader(size_t size, u8 *data, void *userdata, - int (*fn)(void *userdata, u8 id, u8 version, u8 type, - size_t size, u8 const *data)); +int read_vpd(struct vpd_cache *cache, + int (*process_block)(struct vpd_cache *, + u8 id, u8 version, u8 type, + size_t size, u8 const *data)); diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig index 6dc3818cb7..bebb2fab01 100644 --- a/board/ge/mx53ppd/Kconfig +++ b/board/ge/mx53ppd/Kconfig @@ -13,4 +13,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "mx53ppd" +source "board/ge/common/Kconfig" + endif diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index cf278e8f47..23bfe55541 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -40,13 +40,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Index of I2C1, SEGMENT 1 (see CONFIG_SYS_I2C_BUSES). */ -#define VPD_EEPROM_BUS 2 - -/* Address of 24C08 EEPROM. */ -#define VPD_EEPROM_ADDR 0x50 -#define VPD_EEPROM_ADDR_LEN 1 - static u32 mx53_dram_size[2]; phys_size_t get_effective_memsize(void) @@ -297,10 +290,10 @@ struct vpd_cache { /* * Extracts MAC and product information from the VPD. */ -static int vpd_callback(void *userdata, u8 id, u8 version, u8 type, size_t size, - u8 const *data) +static int vpd_callback(struct vpd_cache *userdata, u8 id, u8 version, + u8 type, size_t size, u8 const *data) { - struct vpd_cache *vpd = (struct vpd_cache *)userdata; + struct vpd_cache *vpd = userdata; if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID && size >= 1) { @@ -328,35 +321,6 @@ static void process_vpd(struct vpd_cache *vpd) eth_env_set_enetaddr("ethaddr", vpd->mac1); } -static int read_vpd(uint eeprom_bus) -{ - struct vpd_cache vpd; - int res; - int size = 1024; - u8 *data; - unsigned int current_i2c_bus = i2c_get_bus_num(); - - res = i2c_set_bus_num(eeprom_bus); - if (res < 0) - return res; - - data = malloc(size); - if (!data) - return -ENOMEM; - - res = i2c_read(VPD_EEPROM_ADDR, 0, VPD_EEPROM_ADDR_LEN, data, size); - if (res == 0) { - memset(&vpd, 0, sizeof(vpd)); - vpd_reader(size, data, &vpd, vpd_callback); - process_vpd(&vpd); - } - - free(data); - - i2c_set_bus_num(current_i2c_bus); - return res; -} - int board_init(void) { gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -389,8 +353,14 @@ int misc_init_r(void) int board_late_init(void) { int res; + struct vpd_cache vpd; - read_vpd(VPD_EEPROM_BUS); + memset(&vpd, 0, sizeof(vpd)); + res = read_vpd(&vpd, vpd_callback); + if (!res) + process_vpd(&vpd); + else + printf("Can't read VPD"); res = clock_1GHz(); if (res != 0) diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 917f5b18f6..f022f365e9 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -637,6 +637,13 @@ void sunxi_board_init(void) power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON)); #endif #endif + printf("DRAM:"); + gd->ram_size = sunxi_dram_init(); + printf(" %d MiB\n", (int)(gd->ram_size >> 20)); + if (!gd->ram_size) + hang(); + + sunxi_spl_store_dram_size(gd->ram_size); /* * Only clock up the CPU to full speed if we are reasonably @@ -645,16 +652,7 @@ void sunxi_board_init(void) if (!power_failed) clock_set_pll1(CONFIG_SYS_CLK_FREQ); else - printf("Error setting up the power controller.\n" - "CPU frequency not set.\n"); - - printf("DRAM:"); - gd->ram_size = sunxi_dram_init(); - printf(" %d MiB\n", (int)(gd->ram_size >> 20)); - if (!gd->ram_size) - hang(); - - sunxi_spl_store_dram_size(gd->ram_size); + printf("Failed to set core voltage! Can't set CPU frequency\n"); } #endif diff --git a/cmd/cbfs.c b/cmd/cbfs.c index ece790e56e..c118a952ac 100644 --- a/cmd/cbfs.c +++ b/cmd/cbfs.c @@ -112,12 +112,21 @@ static int do_cbfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, printf(" %8d", file_cbfs_size(file)); switch (type) { + case CBFS_TYPE_BOOTBLOCK: + type_name = "bootblock"; + break; + case CBFS_TYPE_CBFSHEADER: + type_name = "cbfs header"; + break; case CBFS_TYPE_STAGE: type_name = "stage"; break; case CBFS_TYPE_PAYLOAD: type_name = "payload"; break; + case CBFS_TYPE_FIT: + type_name = "fit"; + break; case CBFS_TYPE_OPTIONROM: type_name = "option rom"; break; @@ -136,10 +145,31 @@ static int do_cbfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, case CBFS_TYPE_MICROCODE: type_name = "microcode"; break; - case CBFS_COMPONENT_CMOS_DEFAULT: + case CBFS_TYPE_FSP: + type_name = "fsp"; + break; + case CBFS_TYPE_MRC: + type_name = "mrc"; + break; + case CBFS_TYPE_MMA: + type_name = "mma"; + break; + case CBFS_TYPE_EFI: + type_name = "efi"; + break; + case CBFS_TYPE_STRUCT: + type_name = "struct"; + break; + case CBFS_TYPE_CMOS_DEFAULT: type_name = "cmos default"; break; - case CBFS_COMPONENT_CMOS_LAYOUT: + case CBFS_TYPE_SPD: + type_name = "spd"; + break; + case CBFS_TYPE_MRC_CACHE: + type_name = "mrc cache"; + break; + case CBFS_TYPE_CMOS_LAYOUT: type_name = "cmos layout"; break; case -1: diff --git a/common/bootm_os.c b/common/bootm_os.c index f302135868..855c471c28 100644 --- a/common/bootm_os.c +++ b/common/bootm_os.c @@ -260,7 +260,7 @@ static int do_bootm_plan9(int flag, int argc, char * const argv[], #if defined(CONFIG_BOOTM_VXWORKS) && \ (defined(CONFIG_PPC) || defined(CONFIG_ARM)) -void do_bootvx_fdt(bootm_headers_t *images) +static void do_bootvx_fdt(bootm_headers_t *images) { #if defined(CONFIG_OF_LIBFDT) int ret; @@ -317,8 +317,8 @@ void do_bootvx_fdt(bootm_headers_t *images) puts("## vxWorks terminated\n"); } -static int do_bootm_vxworks(int flag, int argc, char * const argv[], - bootm_headers_t *images) +int do_bootm_vxworks(int flag, int argc, char * const argv[], + bootm_headers_t *images) { if (flag != BOOTM_STATE_OS_GO) return 0; @@ -482,7 +482,7 @@ static boot_os_fn *boot_os[] = { [IH_OS_PLAN9] = do_bootm_plan9, #endif #if defined(CONFIG_BOOTM_VXWORKS) && \ - (defined(CONFIG_PPC) || defined(CONFIG_ARM)) + (defined(CONFIG_PPC) || defined(CONFIG_ARM) || defined(CONFIG_RISCV)) [IH_OS_VXWORKS] = do_bootm_vxworks, #endif #if defined(CONFIG_CMD_ELF) diff --git a/common/image.c b/common/image.c index 0659133fcc..4d4248f234 100644 --- a/common/image.c +++ b/common/image.c @@ -140,6 +140,7 @@ static const table_entry_t uimage_type[] = { { IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",}, { IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",}, { IH_TYPE_IMX8IMAGE, "imx8image", "NXP i.MX8 Boot Image",}, + { IH_TYPE_IMX8MIMAGE, "imx8mimage", "NXP i.MX8M Boot Image",}, { IH_TYPE_INVALID, "invalid", "Invalid Image", }, { IH_TYPE_MULTI, "multi", "Multi-File Image", }, { IH_TYPE_OMAPIMAGE, "omapimage", "TI OMAP SPL With GP CH",}, diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 953841ebe7..35472f4a92 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -286,6 +286,7 @@ config SPL_FIT_IMAGE_TINY bool "Remove functionality from SPL FIT loading to reduce size" depends on SPL_FIT default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6 + default y if ARCH_IMX8M help Enable this to reduce the size of the FIT image loading code in SPL, if space for the SPL binary is very tight. diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index faf4ddbd1f..db436268cb 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -15,6 +15,15 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) #endif +__weak void board_spl_fit_post_load(ulong load_addr, size_t length) +{ +} + +__weak ulong board_spl_fit_size_align(ulong size) +{ + return size; +} + /** * spl_fit_get_image_name(): By using the matching configuration subnode, * retrieve the name of an image, specified by a property name and an index @@ -350,6 +359,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, */ size = fdt_totalsize(fit); size = (size + 3) & ~3; + size = board_spl_fit_size_align(size); base_offset = (size + 3) & ~3; /* @@ -373,8 +383,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, fit = spl_get_load_buffer(-hsize, hsize); sectors = get_aligned_image_size(info, size, 0); count = info->read(info, sector, sectors, fit); - debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n", - sector, sectors, fit, count); + debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu, size=0x%lx\n", + sector, sectors, fit, count, size); + if (count == 0) return -EIO; @@ -510,5 +521,11 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0) spl_image->entry_point = spl_image->load_addr; + spl_image->flags |= SPL_FIT_FOUND; + +#ifdef CONFIG_SECURE_BOOT + board_spl_fit_post_load((ulong)fit, size); +#endif + return 0; } diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig index 0eed5264f2..ea7ad5c596 100644 --- a/configs/cl-som-imx7_defconfig +++ b/configs/cl-som-imx7_defconfig @@ -43,8 +43,11 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb" # CONFIG_ENV_IS_IN_MMC is not set CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_DM_MMC=y CONFIG_FSL_ESDHC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y @@ -56,12 +59,13 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MII=y +CONFIG_DM_REGULATOR=y CONFIG_SPI=y CONFIG_MXC_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_CI_UDC=y -CONFIG_OF_LIBFDT=y diff --git a/configs/edison_defconfig b/configs/edison_defconfig index eb9f9a089f..234dbac4e8 100644 --- a/configs/edison_defconfig +++ b/configs/edison_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_DFU=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -# CONFIG_CMD_PCI is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_TIMER=y CONFIG_CMD_HASH=y diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index c907779636..a937ce3892 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -8,6 +8,15 @@ CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y + +# monitor's EEPROM is connected to the bus through the mux channel 1 +# (the number is the offset in CONFIG_SYS_I2C_BUSES) +CONFIG_SYS_VPD_EEPROM_I2C_BUS=4 +# Address of Atmel 24C08 EEPROM +CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 +CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1 +CONFIG_SYS_VPD_EEPROM_SIZE=1024 + CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig new file mode 100644 index 0000000000..f216d46a8f --- /dev/null +++ b/configs/imx8mq_evk_defconfig @@ -0,0 +1,37 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8M=y +CONFIG_SYS_TEXT_BASE=0x40200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_TARGET_IMX8MQ_EVK=y +CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mq-evk" +CONFIG_OF_LIST="fsl-imx8mq-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg" +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +#CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" +CONFIG_SPL=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX8M=y +CONFIG_SYS_I2C_MXC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_THERMAL=y +CONFIG_FS_FAT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig index 2eee19dab5..0e552a6ac4 100644 --- a/configs/mx23_olinuxino_defconfig +++ b/configs/mx23_olinuxino_defconfig @@ -14,6 +14,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BOOTEFI is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y @@ -27,7 +28,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS_GPIO=y CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=59 +CONFIG_LED_STATUS_BIT=778 CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 34328fd016..9c8ed88047 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -9,6 +9,16 @@ CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y + +# monitor's EEPROM is connected to the bus through the mux channel 1 +# (the number is the offset in CONFIG_SYS_I2C_BUSES) +# (there is also Frame EEPROM connected to the channel 4 (bus 4)) +CONFIG_SYS_VPD_EEPROM_I2C_BUS=2 +# Address of Atmel 24C08 EEPROM +CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 +CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1 +CONFIG_SYS_VPD_EEPROM_SIZE=1024 + CONFIG_SUPPORT_RAW_INITRD=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index a45a34be31..3c293b69e4 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -75,10 +75,12 @@ CONFIG_GMAC_ROCKCHIP=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_ROCKCHIP_RK3399=y +CONFIG_PINCTRL_ROCKCHIP_RK3399_FULL=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_FAN53555=y CONFIG_PMIC_RK8XX=y CONFIG_SPL_DM_REGULATOR=y +CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_SPL_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/riotboard_spl_defconfig b/configs/riotboard_spl_defconfig new file mode 100644 index 0000000000..8b5459aa1a --- /dev/null +++ b/configs/riotboard_spl_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_EMBESTMX6BOARDS=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SPL,MX6S,DDR_MB=1024" +CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd" +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_RAW_IMAGE_SUPPORT=y +CONFIG_SPL_EXT_SUPPORT=y +CONFIG_SPL_OS_BOOT=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_DM=y +CONFIG_FSL_ESDHC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SST=y +CONFIG_PHYLIB=y +CONFIG_MII=y +CONFIG_SPI=y +CONFIG_MXC_SPI=y +CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_VIDEO=y +# CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_OF_LIBFDT=y +CONFIG_SPL_OF_LIBFDT=y diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index 6b9e22ac0e..98a0017070 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -9,6 +9,7 @@ CONFIG_ARCH_UNIPHIER_LD4_SLD8=y CONFIG_MICRO_SUPPORT_CARD=y CONFIG_NR_DRAM_BANKS=3 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" CONFIG_LOGLEVEL=6 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index 4c06f272b1..bba8e180a5 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -8,6 +8,7 @@ CONFIG_SPL=y CONFIG_MICRO_SUPPORT_CARD=y CONFIG_NR_DRAM_BANKS=3 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" CONFIG_LOGLEVEL=6 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index f8f9bdf05c..df6c5119b0 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -7,6 +7,7 @@ CONFIG_ARCH_UNIPHIER_V8_MULTI=y CONFIG_MICRO_SUPPORT_CARD=y CONFIG_NR_DRAM_BANKS=3 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot" CONFIG_LOGLEVEL=6 CONFIG_CMD_CONFIG=y CONFIG_CMD_IMLS=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index 955c7af42a..4d443295ba 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -8,6 +8,8 @@ CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y CONFIG_NR_DRAM_BANKS=1 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg" CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTD is not set diff --git a/doc/device-tree-bindings/w1/mxc-w1.txt b/doc/device-tree-bindings/w1/mxc-w1.txt new file mode 100644 index 0000000000..1fb49cc111 --- /dev/null +++ b/doc/device-tree-bindings/w1/mxc-w1.txt @@ -0,0 +1,37 @@ +NXP i.MX (MXC) One wire bus master controller +======================= + +Child nodes are required in device tree. The driver will detect +the devices serial number and then search in the child nodes in the device tree +for the proper node and try to match it with the device. + +Also check doc/device-tree-bindings/w1-eeprom for possible child nodes drivers + +Driver: +- drivers/w1/mxc_w1.c + +Required properties: +- compatible : should be one of + "fsl,imx21-owire", "fsl,imx27-owire", "fsl,imx31-owire", "fsl,imx25-owire" + "fsl,imx25-owire", "fsl,imx35-owire", "fsl,imx50-owire", "fsl,imx53-owire" + +- reg : Address and length of the register set for the device + +Optional: +* none + +Example: + onewire { + compatible = "fsl,imx53-owire"; + reg = <0x63fa4000 0x4000>; + }; + +Example with child: + onewire { + compatible = "fsl,imx53-owire"; + reg = <0x63fa4000 0x4000>; + + eeprom1: eeprom@0 { + compatible = "maxim,ds24xxx"; + }; + }; diff --git a/doc/driver-model/MIGRATION.txt b/doc/driver-model/MIGRATION.txt index dce4aa3e1d..183d7f5293 100644 --- a/doc/driver-model/MIGRATION.txt +++ b/doc/driver-model/MIGRATION.txt @@ -55,9 +55,6 @@ CONFIG_DM_SPI_FLASH Board Maintainers should submit the patches for enabling DM_SPI and DM_SPI_FLASH to move the migration with in the deadline. -Status: In progress -Deadline: 2018.09 - No dm conversion yet: drivers/spi/cf_spi.c drivers/spi/fsl_espi.c @@ -69,6 +66,9 @@ No dm conversion yet: drivers/spi/sh_spi.c drivers/spi/soft_spi_legacy.c + Status: In progress + Deadline: 2019.04 + Partially converted: drivers/spi/atcspi200_spi.c drivers/spi/davinci_spi.c @@ -79,6 +79,10 @@ Partially converted: drivers/spi/omap3_spi.c drivers/spi/ti_qspi.c + Status: In progress + Deadline: 2019.07 + -- Jagan Teki <jagan@openedev.com> +12/24/2018 03/14/2018 diff --git a/doc/imx/mkimage/imximage.txt b/doc/imx/mkimage/imximage.txt index 803682f558..f2cf23c5da 100644 --- a/doc/imx/mkimage/imximage.txt +++ b/doc/imx/mkimage/imximage.txt @@ -175,7 +175,7 @@ Warning: setting sector offset for DOS compatiblity We have set 255 heads, 63 sector. We have to set the cylinder. The value to be set can be calculated with: - cilynder = <total size> / <heads> / <sectors> / <blocksize> + cylinder = <total size> / <heads> / <sectors> / <blocksize> in this example, 1981284352 / 255 / 63 / 512 = 239.x = 239 diff --git a/doc/imx/mkimage/mxsimage.txt b/doc/imx/mkimage/mxsimage.txt index c3975ee5e6..9159f93a97 100644 --- a/doc/imx/mkimage/mxsimage.txt +++ b/doc/imx/mkimage/mxsimage.txt @@ -46,7 +46,7 @@ These semantics and rules will be outlined now. TAG [LAST] - LAST :: Flag denoting the last section in the file - - After a "TAG" unstruction, any of the following instructions may follow + - After a "TAG" instruction, any of the following instructions may follow in any order and any quantity: NOOP @@ -142,7 +142,7 @@ These semantics and rules will be outlined now. - An optional flags lines can be one of the following: DISPLAYPROGRESS - - Enable boot progress output form the BootROM. + - Enable boot progress output from the BootROM. - If the boot progress output from the BootROM is enabled, the BootROM will produce a letter on the Debug UART for each instruction it started processing. diff --git a/drivers/Makefile b/drivers/Makefile index 5e3b122769..8c53e05d2f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ +obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/ diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c index 9e087b6bd2..487b43ebda 100644 --- a/drivers/clk/uniphier/clk-uniphier-sys.c +++ b/drivers/clk/uniphier/clk-uniphier-sys.c @@ -6,13 +6,12 @@ #include "clk-uniphier.h" -/* Denali driver requires clk_x rate (clk: 50MHz, clk_x & ecc_clk: 200MHz) */ #define UNIPHIER_LD4_SYS_CLK_NAND(_id) \ - UNIPHIER_CLK_RATE(128, 200000000), \ + UNIPHIER_CLK_RATE(128, 50000000), \ UNIPHIER_CLK_GATE((_id), 128, 0x2104, 2) #define UNIPHIER_LD11_SYS_CLK_NAND(_id) \ - UNIPHIER_CLK_RATE(128, 200000000), \ + UNIPHIER_CLK_RATE(128, 50000000), \ UNIPHIER_CLK_GATE((_id), 128, 0x210c, 0) const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = { @@ -20,6 +19,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = { defined(CONFIG_ARCH_UNIPHIER_PRO4) || defined(CONFIG_ARCH_UNIPHIER_PRO5) ||\ defined(CONFIG_ARCH_UNIPHIER_PXS2) || defined(CONFIG_ARCH_UNIPHIER_LD6B) UNIPHIER_LD4_SYS_CLK_NAND(2), + UNIPHIER_CLK_RATE(3, 200000000), UNIPHIER_CLK_GATE_SIMPLE(6, 0x2104, 12), /* ether (Pro4, PXs2) */ UNIPHIER_CLK_GATE_SIMPLE(7, 0x2104, 5), /* ether-gb (Pro4) */ UNIPHIER_CLK_GATE_SIMPLE(8, 0x2104, 10), /* stdmac */ @@ -36,6 +36,7 @@ const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = { const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = { #if defined(CONFIG_ARCH_UNIPHIER_LD11) || defined(CONFIG_ARCH_UNIPHIER_LD20) UNIPHIER_LD11_SYS_CLK_NAND(2), + UNIPHIER_CLK_RATE(3, 200000000), UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 6), /* ether */ UNIPHIER_CLK_GATE_SIMPLE(8, 0x210c, 8), /* stdmac */ UNIPHIER_CLK_GATE_SIMPLE(14, 0x210c, 14), /* usb30 (LD20) */ @@ -48,6 +49,7 @@ const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = { const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = { #if defined(CONFIG_ARCH_UNIPHIER_PXS3) UNIPHIER_LD11_SYS_CLK_NAND(2), + UNIPHIER_CLK_RATE(3, 200000000), UNIPHIER_CLK_GATE_SIMPLE(6, 0x210c, 9), /* ether0 */ UNIPHIER_CLK_GATE_SIMPLE(7, 0x210c, 10), /* ether1 */ UNIPHIER_CLK_GATE_SIMPLE(12, 0x210c, 4), /* usb30 (gio0) */ diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig index b764add060..d4b393d25e 100644 --- a/drivers/ddr/Kconfig +++ b/drivers/ddr/Kconfig @@ -1 +1,2 @@ source "drivers/ddr/altera/Kconfig" +source "drivers/ddr/imx/Kconfig" diff --git a/drivers/ddr/imx/Kconfig b/drivers/ddr/imx/Kconfig new file mode 100644 index 0000000000..7e06fb2f7d --- /dev/null +++ b/drivers/ddr/imx/Kconfig @@ -0,0 +1 @@ +source "drivers/ddr/imx/imx8m/Kconfig" diff --git a/drivers/ddr/imx/imx8m/Kconfig b/drivers/ddr/imx/imx8m/Kconfig new file mode 100644 index 0000000000..71f466f5ec --- /dev/null +++ b/drivers/ddr/imx/imx8m/Kconfig @@ -0,0 +1,22 @@ +config IMX8M_DRAM + bool "imx8m dram" + +config IMX8M_LPDDR4 + bool "imx8m lpddr4" + select IMX8M_DRAM + help + Select the i.MX8M LPDDR4 driver support on i.MX8M SOC. + +config IMX8M_DDR4 + bool "imx8m ddr4" + select IMX8M_DRAM + help + Select the i.MX8M DDR4 driver support on i.MX8M SOC. + +config SAVED_DRAM_TIMING_BASE + hex "Define the base address for saved dram timing" + help + after DRAM is trained, need to save the dram related timming + info into memory for low power use. OCRAM_S is used for this + purpose on i.MX8MM. + default 0x180000 diff --git a/drivers/ddr/imx/imx8m/Makefile b/drivers/ddr/imx/imx8m/Makefile new file mode 100644 index 0000000000..64f9ab20e6 --- /dev/null +++ b/drivers/ddr/imx/imx8m/Makefile @@ -0,0 +1,11 @@ +# +# Copyright 2018 NXP +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_IMX8M_DRAM) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_init.o +obj-$(CONFIG_IMX8M_DDR4) += ddr4_init.o +endif diff --git a/drivers/ddr/imx/imx8m/ddr4_init.c b/drivers/ddr/imx/imx8m/ddr4_init.c new file mode 100644 index 0000000000..031cdc57e1 --- /dev/null +++ b/drivers/ddr/imx/imx8m/ddr4_init.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx8m_ddr.h> +#include <asm/arch/sys_proto.h> + +void ddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num) +{ + int i = 0; + + for (i = 0; i < num; i++) { + reg32_write(ddrc_cfg->reg, ddrc_cfg->val); + ddrc_cfg++; + } +} + +void ddr_init(struct dram_timing_info *dram_timing) +{ + volatile unsigned int tmp_t; + /* + * assert [0]ddr1_preset_n, [1]ddr1_core_reset_n, + * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n, + * [4]src_system_rst_b! + */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00003F); + /* deassert [4]src_system_rst_b! */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F); + + /* + * change the clock source of dram_apb_clk_root + * to source 4 --800MHz/4 + */ + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(4) | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4)); + + dram_pll_init(DRAM_PLL_OUT_600M); + + reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */ + reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */ + + /* release [0]ddr1_preset_n, [3]ddr1_phy_pwrokin_n */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006); + + reg32_write(DDRC_DBG1(0), 0x00000001); + reg32_write(DDRC_PWRCTL(0), 0x00000001); + + while (0 != (0x7 & reg32_read(DDRC_STAT(0)))) + ; + + /* config the uMCTL2's registers */ + ddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num); + + reg32_write(DDRC_RFSHCTL3(0), 0x00000001); + /* RESET: <ctn> DEASSERTED */ + /* RESET: <a Port 0 DEASSERTED(0) */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004); + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000); + + reg32_write(DDRC_DBG1(0), 0x00000000); + reg32_write(DDRC_PWRCTL(0), 0x00000aa); + reg32_write(DDRC_SWCTL(0), 0x00000000); + + reg32_write(DDRC_DFIMISC(0), 0x00000000); + + /* config the DDR PHY's registers */ + ddr_cfg_phy(dram_timing); + + do { + tmp_t = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + + 4 * 0x00020097); + } while (tmp_t != 0); + + reg32_write(DDRC_DFIMISC(0), 0x00000020); + + /* wait DFISTAT.dfi_init_complete to 1 */ + while (0 == (0x1 & reg32_read(DDRC_DFISTAT(0)))) + ; + + /* clear DFIMISC.dfi_init_complete_en */ + reg32_write(DDRC_DFIMISC(0), 0x00000000); + /* set DFIMISC.dfi_init_complete_en again */ + reg32_write(DDRC_DFIMISC(0), 0x00000001); + reg32_write(DDRC_PWRCTL(0), 0x0000088); + + /* + * set SWCTL.sw_done to enable quasi-dynamic register + * programming outside reset. + */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + /* wait SWSTAT.sw_done_ack to 1 */ + while (0 == (0x1 & reg32_read(DDRC_SWSTAT(0)))) + ; + + /* wait STAT to normal state */ + while (0x1 != (0x7 & reg32_read(DDRC_STAT(0)))) + ; + + reg32_write(DDRC_PWRCTL(0), 0x0000088); + reg32_write(DDRC_PCTRL_0(0), 0x00000001); + /* dis_auto-refresh is set to 0 */ + reg32_write(DDRC_RFSHCTL3(0), 0x00000000); + + /* save the dram timing config into memory */ + dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE); +} diff --git a/drivers/ddr/imx/imx8m/ddrphy_csr.c b/drivers/ddr/imx/imx8m/ddrphy_csr.c new file mode 100644 index 0000000000..67dd4e7059 --- /dev/null +++ b/drivers/ddr/imx/imx8m/ddrphy_csr.c @@ -0,0 +1,732 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +/* ddr phy trained csr */ +struct dram_cfg_param ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; + +uint32_t ddrphy_trained_csr_num = ARRAY_SIZE(ddrphy_trained_csr); diff --git a/drivers/ddr/imx/imx8m/ddrphy_train.c b/drivers/ddr/imx/imx8m/ddrphy_train.c new file mode 100644 index 0000000000..18f7ed7fea --- /dev/null +++ b/drivers/ddr/imx/imx8m/ddrphy_train.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <linux/kernel.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +void ddr_cfg_phy(struct dram_timing_info *dram_timing) +{ + struct dram_cfg_param *dram_cfg; + struct dram_fsp_msg *fsp_msg; + unsigned int num; + int i = 0; + int j = 0; + + /* initialize PHY configuration */ + dram_cfg = dram_timing->ddrphy_cfg; + num = dram_timing->ddrphy_cfg_num; + for (i = 0; i < num; i++) { + /* config phy reg */ + dwc_ddrphy_apb_wr(dram_cfg->reg, dram_cfg->val); + dram_cfg++; + } + + /* load the frequency setpoint message block config */ + fsp_msg = dram_timing->fsp_msg; + for (i = 0; i < dram_timing->fsp_msg_num; i++) { + debug("DRAM PHY training for %dMTS\n", fsp_msg->drate); + /* set dram PHY input clocks to desired frequency */ + ddrphy_init_set_dfi_clk(fsp_msg->drate); + + /* load the dram training firmware image */ + dwc_ddrphy_apb_wr(0xd0000, 0x0); + ddr_load_train_firmware(fsp_msg->fw_type); + + /* load the frequency set point message block parameter */ + dram_cfg = fsp_msg->fsp_cfg; + num = fsp_msg->fsp_cfg_num; + for (j = 0; j < num; j++) { + dwc_ddrphy_apb_wr(dram_cfg->reg, dram_cfg->val); + dram_cfg++; + } + + /* + * -------------------- excute the firmware -------------------- + * Running the firmware is a simply process to taking the + * PMU out of reset and stall, then the firwmare will be run + * 1. reset the PMU; + * 2. begin the excution; + * 3. wait for the training done; + * 4. read the message block result. + * ------------------------------------------------------------- + */ + dwc_ddrphy_apb_wr(0xd0000, 0x1); + dwc_ddrphy_apb_wr(0xd0099, 0x9); + dwc_ddrphy_apb_wr(0xd0099, 0x1); + dwc_ddrphy_apb_wr(0xd0099, 0x0); + + /* Wait for the training firmware to complete */ + wait_ddrphy_training_complete(); + + /* Halt the microcontroller. */ + dwc_ddrphy_apb_wr(0xd0099, 0x1); + + /* Read the Message Block results */ + dwc_ddrphy_apb_wr(0xd0000, 0x0); + ddrphy_init_read_msg_block(fsp_msg->fw_type); + dwc_ddrphy_apb_wr(0xd0000, 0x1); + + fsp_msg++; + } + + /* Load PHY Init Engine Image */ + dram_cfg = dram_timing->ddrphy_pie; + num = dram_timing->ddrphy_pie_num; + for (i = 0; i < num; i++) { + dwc_ddrphy_apb_wr(dram_cfg->reg, dram_cfg->val); + dram_cfg++; + } + + /* save the ddr PHY trained CSR in memory for low power use */ + ddrphy_trained_csr_save(ddrphy_trained_csr, ddrphy_trained_csr_num); +} diff --git a/drivers/ddr/imx/imx8m/ddrphy_utils.c b/drivers/ddr/imx/imx8m/ddrphy_utils.c new file mode 100644 index 0000000000..4732539764 --- /dev/null +++ b/drivers/ddr/imx/imx8m/ddrphy_utils.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +*/ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/clock.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> + +static inline void poll_pmu_message_ready(void) +{ + unsigned int reg; + + do { + reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0004); + } while (reg & 0x1); +} + +static inline void ack_pmu_message_receive(void) +{ + unsigned int reg; + + reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0031, 0x0); + + do { + reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0004); + } while (!(reg & 0x1)); + + reg32_write(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0031, 0x1); +} + +static inline unsigned int get_mail(void) +{ + unsigned int reg; + + poll_pmu_message_ready(); + + reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0032); + + ack_pmu_message_receive(); + + return reg; +} + +static inline unsigned int get_stream_message(void) +{ + unsigned int reg, reg2; + + poll_pmu_message_ready(); + + reg = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0032); + + reg2 = reg32_read(IP2APB_DDRPHY_IPS_BASE_ADDR(0) + 4 * 0xd0034); + + reg2 = (reg2 << 16) | reg; + + ack_pmu_message_receive(); + + return reg2; +} + +static inline void decode_major_message(unsigned int mail) +{ + debug("[PMU Major message = 0x%08x]\n", mail); +} + +static inline void decode_streaming_message(void) +{ + unsigned int string_index, arg __maybe_unused; + int i = 0; + + string_index = get_stream_message(); + debug("PMU String index = 0x%08x\n", string_index); + while (i < (string_index & 0xffff)) { + arg = get_stream_message(); + debug("arg[%d] = 0x%08x\n", i, arg); + i++; + } + + debug("\n"); +} + +void wait_ddrphy_training_complete(void) +{ + unsigned int mail; + + while (1) { + mail = get_mail(); + decode_major_message(mail); + if (mail == 0x08) { + decode_streaming_message(); + } else if (mail == 0x07) { + debug("Training PASS\n"); + break; + } else if (mail == 0xff) { + printf("Training FAILED\n"); + break; + } + } +} + +void ddrphy_init_set_dfi_clk(unsigned int drate) +{ + switch (drate) { + case 3200: + dram_pll_init(MHZ(800)); + dram_disable_bypass(); + break; + case 3000: + dram_pll_init(MHZ(750)); + dram_disable_bypass(); + break; + case 2400: + dram_pll_init(MHZ(600)); + dram_disable_bypass(); + break; + case 1600: + dram_pll_init(MHZ(400)); + dram_disable_bypass(); + break; + case 667: + dram_pll_init(MHZ(167)); + dram_disable_bypass(); + break; + case 400: + dram_enable_bypass(MHZ(400)); + break; + case 100: + dram_enable_bypass(MHZ(100)); + break; + default: + return; + } +} + +void ddrphy_init_read_msg_block(enum fw_type type) +{ +} + +void lpddr4_mr_write(unsigned int mr_rank, unsigned int mr_addr, + unsigned int mr_data) +{ + unsigned int tmp; + /* + * 1. Poll MRSTAT.mr_wr_busy until it is 0. + * This checks that there is no outstanding MR transaction. + * No writes should be performed to MRCTRL0 and MRCTRL1 if + * MRSTAT.mr_wr_busy = 1. + */ + do { + tmp = reg32_read(DDRC_MRSTAT(0)); + } while (tmp & 0x1); + /* + * 2. Write the MRCTRL0.mr_type, MRCTRL0.mr_addr, MRCTRL0.mr_rank and + * (for MRWs) MRCTRL1.mr_data to define the MR transaction. + */ + reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4)); + reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8) | mr_data); + reg32setbit(DDRC_MRCTRL0(0), 31); +} + +unsigned int lpddr4_mr_read(unsigned int mr_rank, unsigned int mr_addr) +{ + unsigned int tmp; + + reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x1); + do { + tmp = reg32_read(DDRC_MRSTAT(0)); + } while (tmp & 0x1); + + reg32_write(DDRC_MRCTRL0(0), (mr_rank << 4) | 0x1); + reg32_write(DDRC_MRCTRL1(0), (mr_addr << 8)); + reg32setbit(DDRC_MRCTRL0(0), 31); + do { + tmp = reg32_read(DRC_PERF_MON_MRR0_DAT(0)); + } while ((tmp & 0x8) == 0); + tmp = reg32_read(DRC_PERF_MON_MRR1_DAT(0)); + tmp = tmp & 0xff; + reg32_write(DRC_PERF_MON_MRR0_DAT(0), 0x4); + + return tmp; +} diff --git a/drivers/ddr/imx/imx8m/helper.c b/drivers/ddr/imx/imx8m/helper.c new file mode 100644 index 0000000000..61cd4f6db1 --- /dev/null +++ b/drivers/ddr/imx/imx8m/helper.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> +#include <asm/sections.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define IMEM_LEN 32768 /* byte */ +#define DMEM_LEN 16384 /* byte */ +#define IMEM_2D_OFFSET 49152 + +#define IMEM_OFFSET_ADDR 0x00050000 +#define DMEM_OFFSET_ADDR 0x00054000 +#define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0) + +/* We need PHY iMEM PHY is 32KB padded */ +void ddr_load_train_firmware(enum fw_type type) +{ + u32 tmp32, i; + u32 error = 0; + unsigned long pr_to32, pr_from32; + unsigned long fw_offset = type ? IMEM_2D_OFFSET : 0; + unsigned long imem_start = (unsigned long)&_end + fw_offset; + unsigned long dmem_start = imem_start + IMEM_LEN; + + pr_from32 = imem_start; + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR; + for (i = 0x0; i < IMEM_LEN; ) { + tmp32 = readl(pr_from32); + writew(tmp32 & 0x0000ffff, pr_to32); + pr_to32 += 4; + writew((tmp32 >> 16) & 0x0000ffff, pr_to32); + pr_to32 += 4; + pr_from32 += 4; + i += 4; + } + + pr_from32 = dmem_start; + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR; + for (i = 0x0; i < DMEM_LEN; ) { + tmp32 = readl(pr_from32); + writew(tmp32 & 0x0000ffff, pr_to32); + pr_to32 += 4; + writew((tmp32 >> 16) & 0x0000ffff, pr_to32); + pr_to32 += 4; + pr_from32 += 4; + i += 4; + } + + debug("check ddr4_pmu_train_imem code\n"); + pr_from32 = imem_start; + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * IMEM_OFFSET_ADDR; + for (i = 0x0; i < IMEM_LEN; ) { + tmp32 = (readw(pr_to32) & 0x0000ffff); + pr_to32 += 4; + tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16); + + if (tmp32 != readl(pr_from32)) { + debug("%lx %lx\n", pr_from32, pr_to32); + error++; + } + pr_from32 += 4; + pr_to32 += 4; + i += 4; + } + if (error) + printf("check ddr4_pmu_train_imem code fail=%d\n", error); + else + debug("check ddr4_pmu_train_imem code pass\n"); + + debug("check ddr4_pmu_train_dmem code\n"); + pr_from32 = dmem_start; + pr_to32 = DDR_TRAIN_CODE_BASE_ADDR + 4 * DMEM_OFFSET_ADDR; + for (i = 0x0; i < DMEM_LEN;) { + tmp32 = (readw(pr_to32) & 0x0000ffff); + pr_to32 += 4; + tmp32 += ((readw(pr_to32) & 0x0000ffff) << 16); + if (tmp32 != readl(pr_from32)) { + debug("%lx %lx\n", pr_from32, pr_to32); + error++; + } + pr_from32 += 4; + pr_to32 += 4; + i += 4; + } + + if (error) + printf("check ddr4_pmu_train_dmem code fail=%d", error); + else + debug("check ddr4_pmu_train_dmem code pass\n"); +} + +void ddrphy_trained_csr_save(struct dram_cfg_param *ddrphy_csr, + unsigned int num) +{ + int i = 0; + + /* enable the ddrphy apb */ + dwc_ddrphy_apb_wr(0xd0000, 0x0); + dwc_ddrphy_apb_wr(0xc0080, 0x3); + for (i = 0; i < num; i++) { + ddrphy_csr->val = dwc_ddrphy_apb_rd(ddrphy_csr->reg); + ddrphy_csr++; + } + /* disable the ddrphy apb */ + dwc_ddrphy_apb_wr(0xc0080, 0x2); + dwc_ddrphy_apb_wr(0xd0000, 0x1); +} + +void dram_config_save(struct dram_timing_info *timing_info, + unsigned long saved_timing_base) +{ + int i = 0; + struct dram_timing_info *saved_timing = (struct dram_timing_info *)saved_timing_base; + struct dram_cfg_param *cfg; + + saved_timing->ddrc_cfg_num = timing_info->ddrc_cfg_num; + saved_timing->ddrphy_cfg_num = timing_info->ddrphy_cfg_num; + saved_timing->ddrphy_trained_csr_num = ddrphy_trained_csr_num; + saved_timing->ddrphy_pie_num = timing_info->ddrphy_pie_num; + + /* save the fsp table */ + for (i = 0; i < 4; i++) + saved_timing->fsp_table[i] = timing_info->fsp_table[i]; + + cfg = (struct dram_cfg_param *)(saved_timing_base + + sizeof(*timing_info)); + + /* save ddrc config */ + saved_timing->ddrc_cfg = cfg; + for (i = 0; i < timing_info->ddrc_cfg_num; i++) { + cfg->reg = timing_info->ddrc_cfg[i].reg; + cfg->val = timing_info->ddrc_cfg[i].val; + cfg++; + } + + /* save ddrphy config */ + saved_timing->ddrphy_cfg = cfg; + for (i = 0; i < timing_info->ddrphy_cfg_num; i++) { + cfg->reg = timing_info->ddrphy_cfg[i].reg; + cfg->val = timing_info->ddrphy_cfg[i].val; + cfg++; + } + + /* save the ddrphy csr */ + saved_timing->ddrphy_trained_csr = cfg; + for (i = 0; i < ddrphy_trained_csr_num; i++) { + cfg->reg = ddrphy_trained_csr[i].reg; + cfg->val = ddrphy_trained_csr[i].val; + cfg++; + } + + /* save the ddrphy pie */ + saved_timing->ddrphy_pie = cfg; + for (i = 0; i < timing_info->ddrphy_pie_num; i++) { + cfg->reg = timing_info->ddrphy_pie[i].reg; + cfg->val = timing_info->ddrphy_pie[i].val; + cfg++; + } +} diff --git a/drivers/ddr/imx/imx8m/lpddr4_init.c b/drivers/ddr/imx/imx8m/lpddr4_init.c new file mode 100644 index 0000000000..a4bc1de8eb --- /dev/null +++ b/drivers/ddr/imx/imx8m/lpddr4_init.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2018 NXP +* +*/ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <asm/arch/clock.h> +#include <asm/arch/ddr.h> +#include <asm/arch/lpddr4_define.h> +#include <asm/arch/sys_proto.h> + +void lpddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num) +{ + int i = 0; + + for (i = 0; i < num; i++) { + reg32_write(ddrc_cfg->reg, ddrc_cfg->val); + ddrc_cfg++; + } +} + +void ddr_init(struct dram_timing_info *dram_timing) +{ + unsigned int tmp; + + debug("DDRINFO: start lpddr4 ddr init\n"); + /* step 1: reset */ + if (is_imx8mq()) { + reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F); + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F); + reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000); + } else { + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F); + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F); + } + + mdelay(100); + + debug("DDRINFO: reset done\n"); + /* + * change the clock source of dram_apb_clk_root: + * source 4 800MHz /4 = 200MHz + */ + clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | + CLK_ROOT_SOURCE_SEL(4) | + CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4)); + + /* disable iso */ + reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */ + reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */ + + debug("DDRINFO: cfg clk\n"); + dram_pll_init(MHZ(750)); + + /* + * release [0]ddr1_preset_n, [1]ddr1_core_reset_n, + * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n + */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006); + + /*step2 Configure uMCTL2's registers */ + debug("DDRINFO: ddrc config start\n"); + lpddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num); + debug("DDRINFO: ddrc config done\n"); + + /* + * step3 de-assert all reset + * RESET: <core_ddrc_rstn> DEASSERTED + * RESET: <aresetn> for Port 0 DEASSERT(0)ED + */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004); + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000); + + reg32_write(DDRC_DBG1(0), 0x00000000); + /* step4 */ + /* [0]dis_auto_refresh=1 */ + reg32_write(DDRC_RFSHCTL3(0), 0x00000011); + + /* [8]--1: lpddr4_sr allowed; [5]--1: software entry to SR */ + reg32_write(DDRC_PWRCTL(0), 0x000000a8); + + do { + tmp = reg32_read(DDRC_STAT(0)); + } while ((tmp & 0x33f) != 0x223); + + reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */ + + /* step5 */ + reg32_write(DDRC_SWCTL(0), 0x00000000); + + /* step6 */ + tmp = reg32_read(DDRC_MSTR2(0)); + if (tmp == 0x2) + reg32_write(DDRC_DFIMISC(0), 0x00000210); + else if (tmp == 0x1) + reg32_write(DDRC_DFIMISC(0), 0x00000110); + else + reg32_write(DDRC_DFIMISC(0), 0x00000010); + + /* step7 [0]--1: disable quasi-dynamic programming */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + + /* step8 Configure LPDDR4 PHY's registers */ + debug("DDRINFO:ddrphy config start\n"); + ddr_cfg_phy(dram_timing); + debug("DDRINFO: ddrphy config done\n"); + + /* + * step14 CalBusy.0 =1, indicates the calibrator is actively + * calibrating. Wait Calibrating done. + */ + do { + tmp = reg32_read(DDRPHY_CalBusy(0)); + } while ((tmp & 0x1)); + + debug("DDRINFO:ddrphy calibration done\n"); + + /* step15 [0]--0: to enable quasi-dynamic programming */ + reg32_write(DDRC_SWCTL(0), 0x00000000); + + /* step16 */ + tmp = reg32_read(DDRC_MSTR2(0)); + if (tmp == 0x2) + reg32_write(DDRC_DFIMISC(0), 0x00000230); + else if (tmp == 0x1) + reg32_write(DDRC_DFIMISC(0), 0x00000130); + else + reg32_write(DDRC_DFIMISC(0), 0x00000030); + + /* step17 [0]--1: disable quasi-dynamic programming */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + /* step18 wait DFISTAT.dfi_init_complete to 1 */ + do { + tmp = reg32_read(DDRC_DFISTAT(0)); + } while ((tmp & 0x1) == 0x0); + + /* step19 */ + reg32_write(DDRC_SWCTL(0), 0x00000000); + + /* step20~22 */ + tmp = reg32_read(DDRC_MSTR2(0)); + if (tmp == 0x2) { + reg32_write(DDRC_DFIMISC(0), 0x00000210); + /* set DFIMISC.dfi_init_complete_en again */ + reg32_write(DDRC_DFIMISC(0), 0x00000211); + } else if (tmp == 0x1) { + reg32_write(DDRC_DFIMISC(0), 0x00000110); + /* set DFIMISC.dfi_init_complete_en again */ + reg32_write(DDRC_DFIMISC(0), 0x00000111); + } else { + /* clear DFIMISC.dfi_init_complete_en */ + reg32_write(DDRC_DFIMISC(0), 0x00000010); + /* set DFIMISC.dfi_init_complete_en again */ + reg32_write(DDRC_DFIMISC(0), 0x00000011); + } + + /* step23 [5]selfref_sw=0; */ + reg32_write(DDRC_PWRCTL(0), 0x00000008); + /* step24 sw_done=1 */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + + /* step25 wait SWSTAT.sw_done_ack to 1 */ + do { + tmp = reg32_read(DDRC_SWSTAT(0)); + } while ((tmp & 0x1) == 0x0); + +#ifdef DFI_BUG_WR + reg32_write(DDRC_DFIPHYMSTR(0), 0x00000001); +#endif + /* wait STAT.operating_mode([1:0] for ddr3) to normal state */ + do { + tmp = reg32_read(DDRC_STAT(0)); + } while ((tmp & 0x3) != 0x1); + + /* step26 */ + reg32_write(DDRC_RFSHCTL3(0), 0x00000010); + + /* enable port 0 */ + reg32_write(DDRC_PCTRL_0(0), 0x00000001); + debug("DDRINFO: ddrmix config done\n"); + + /* save the dram timing config into memory */ + dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE); +} diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index b820160ae7..8bd30c75b2 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -40,15 +40,15 @@ static unsigned long gpio_ports[] = { [2] = GPIO3_BASE_ADDR, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \ + defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \ defined(CONFIG_ARCH_IMX8) [3] = GPIO4_BASE_ADDR, #endif #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \ + defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \ defined(CONFIG_ARCH_IMX8) [4] = GPIO5_BASE_ADDR, -#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_MX8M)) +#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_IMX8M)) [5] = GPIO6_BASE_ADDR, #endif #endif @@ -353,13 +353,13 @@ static const struct mxc_gpio_plat mxc_plat[] = { { 2, (struct gpio_regs *)GPIO3_BASE_ADDR }, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) + defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8) { 3, (struct gpio_regs *)GPIO4_BASE_ADDR }, #endif #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) + defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8) { 4, (struct gpio_regs *)GPIO5_BASE_ADDR }, -#ifndef CONFIG_MX8M +#ifndef CONFIG_IMX8M { 5, (struct gpio_regs *)GPIO6_BASE_ADDR }, #endif #endif @@ -377,13 +377,13 @@ U_BOOT_DEVICES(mxc_gpios) = { { "gpio_mxc", &mxc_plat[2] }, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) + defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8) { "gpio_mxc", &mxc_plat[3] }, #endif #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) + defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8) { "gpio_mxc", &mxc_plat[4] }, -#ifndef CONFIG_MX8M +#ifndef CONFIG_IMX8M { "gpio_mxc", &mxc_plat[5] }, #endif #endif diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index 9ff475d925..f84fe88db1 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -34,7 +34,7 @@ #define BM_OUT_STATUS_DED 0x00000400 #define BM_OUT_STATUS_LOCKED 0x00000800 #define BM_OUT_STATUS_PROGFAIL 0x00001000 -#elif defined(CONFIG_MX8M) +#elif defined(CONFIG_IMX8M) #define BM_CTRL_ADDR 0x000000ff #else #define BM_CTRL_ADDR 0x0000007f @@ -80,7 +80,7 @@ #elif defined(CONFIG_MX7ULP) #define FUSE_BANK_SIZE 0x80 #define FUSE_BANKS 31 -#elif defined(CONFIG_MX8M) +#elif defined(CONFIG_IMX8M) #define FUSE_BANK_SIZE 0x40 #define FUSE_BANKS 64 #else @@ -298,7 +298,7 @@ static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word, u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0; #ifdef CONFIG_MX7 u32 addr = bank; -#elif defined CONFIG_MX8M +#elif defined CONFIG_IMX8M u32 addr = bank << 2 | word; #else u32 addr; diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 3cdfa7f5a6..74007e2ad4 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -259,7 +259,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, int timeout; struct fsl_esdhc *regs = priv->esdhc_regs; #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_IMX8) || defined(CONFIG_MX8M) + defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) dma_addr_t addr; #endif uint wml_value; @@ -273,7 +273,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_IMX8) || defined(CONFIG_MX8M) + defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) addr = virt_to_phys((void *)(data->dest)); if (upper_32_bits(addr)) printf("Error found for upper 32 bits\n"); @@ -303,7 +303,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, wml_value << 16); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_IMX8) || defined(CONFIG_MX8M) + defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) addr = virt_to_phys((void *)(data->src)); if (upper_32_bits(addr)) printf("Error found for upper 32 bits\n"); @@ -369,7 +369,7 @@ static void check_and_invalidate_dcache_range unsigned size = roundup(ARCH_DMA_MINALIGN, data->blocks*data->blocksize); #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_IMX8) || defined(CONFIG_MX8M) + defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) dma_addr_t addr; addr = virt_to_phys((void *)(data->dest)); diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 008f7b4b4b..fd1723feda 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -88,6 +88,15 @@ config NAND_VF610_NFC The driver supports a maximum 2k page size. The driver currently does not support hardware ECC. +if NAND_VF610_NFC + +config NAND_VF610_NFC_DT + bool "Support Vybrid's vf610 NAND controller as a DT device" + depends on OF_CONTROL && MTD + help + Enable the driver for Vybrid's vf610 NAND flash on platforms + using device tree. + choice prompt "Hardware ECC strength" depends on NAND_VF610_NFC @@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES endchoice +endif + config NAND_PXA3XX bool "Support for NAND on PXA3xx and Armada 370/XP/38x" select SYS_NAND_SELF_INIT diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index d1cac063f4..e0eb1339ec 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -69,14 +69,6 @@ static int dma_mapping_error(void *dev, dma_addr_t addr) #define DENALI_INVALID_BANK -1 #define DENALI_NR_BANKS 4 -/* - * The bus interface clock, clk_x, is phase aligned with the core clock. The - * clk_x is an integral multiple N of the core clk. The value N is configured - * at IP delivery time, and its available value is 4, 5, or 6. We need to align - * to the largest value to make it work with any possible configuration. - */ -#define DENALI_CLK_X_MULT 6 - static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) { return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand); @@ -595,6 +587,12 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, } iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE); + /* + * The ->setup_dma() hook kicks DMA by using the data/command + * interface, which belongs to a different AXI port from the + * register interface. Read back the register to avoid a race. + */ + ioread32(denali->reg + DMA_ENABLE); denali_reset_irq(denali); denali->setup_dma(denali, dma_addr, page, write); @@ -946,7 +944,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, { struct denali_nand_info *denali = mtd_to_denali(mtd); const struct nand_sdr_timings *timings; - unsigned long t_clk; + unsigned long t_x, mult_x; int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data; int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup; int addr_2_data_mask; @@ -957,15 +955,24 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, return PTR_ERR(timings); /* clk_x period in picoseconds */ - t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate); - if (!t_clk) + t_x = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate); + if (!t_x) + return -EINVAL; + + /* + * The bus interface clock, clk_x, is phase aligned with the core clock. + * The clk_x is an integral multiple N of the core clk. The value N is + * configured at IP delivery time, and its available value is 4, 5, 6. + */ + mult_x = DIV_ROUND_CLOSEST_ULL(denali->clk_x_rate, denali->clk_rate); + if (mult_x < 4 || mult_x > 6) return -EINVAL; if (chipnr == NAND_DATA_IFACE_CHECK_ONLY) return 0; /* tREA -> ACC_CLKS */ - acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk); + acc_clks = DIV_ROUND_UP(timings->tREA_max, t_x); acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE); tmp = ioread32(denali->reg + ACC_CLKS); @@ -974,7 +981,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, iowrite32(tmp, denali->reg + ACC_CLKS); /* tRWH -> RE_2_WE */ - re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk); + re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_x); re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE); tmp = ioread32(denali->reg + RE_2_WE); @@ -983,7 +990,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, iowrite32(tmp, denali->reg + RE_2_WE); /* tRHZ -> RE_2_RE */ - re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk); + re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_x); re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE); tmp = ioread32(denali->reg + RE_2_RE); @@ -997,8 +1004,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, * With WE_2_RE properly set, the Denali controller automatically takes * care of the delay; the driver need not set NAND_WAIT_TCCS. */ - we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min), - t_clk); + we_2_re = DIV_ROUND_UP(max(timings->tCCS_min, timings->tWHR_min), t_x); we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE); @@ -1013,7 +1019,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, if (denali->revision < 0x0501) addr_2_data_mask >>= 1; - addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk); + addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_x); addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA); @@ -1023,7 +1029,7 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, /* tREH, tWH -> RDWR_EN_HI_CNT */ rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min), - t_clk); + t_x); rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE); tmp = ioread32(denali->reg + RDWR_EN_HI_CNT); @@ -1032,11 +1038,10 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT); /* tRP, tWP -> RDWR_EN_LO_CNT */ - rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), - t_clk); + rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), t_x); rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min), - t_clk); - rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT); + t_x); + rdwr_en_lo_hi = max_t(int, rdwr_en_lo_hi, mult_x); rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi); rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE); @@ -1046,8 +1051,8 @@ static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT); /* tCS, tCEA -> CS_SETUP_CNT */ - cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo, - (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks, + cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_x) - rdwr_en_lo, + (int)DIV_ROUND_UP(timings->tCEA_max, t_x) - acc_clks, 0); cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE); diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index 9b797beffa..019deda094 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -292,6 +292,7 @@ struct udevice; struct denali_nand_info { struct nand_chip nand; + unsigned long clk_rate; /* core clock rate */ unsigned long clk_x_rate; /* bus interface clock rate */ int active_bank; /* currently selected bank */ struct udevice *dev; diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index 65a7797f0f..d384b974df 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -62,7 +62,7 @@ static int denali_dt_probe(struct udevice *dev) { struct denali_nand_info *denali = dev_get_priv(dev); const struct denali_dt_data *data; - struct clk clk; + struct clk clk, clk_x, clk_ecc; struct resource res; int ret; @@ -87,15 +87,49 @@ static int denali_dt_probe(struct udevice *dev) denali->host = devm_ioremap(dev, res.start, resource_size(&res)); - ret = clk_get_by_index(dev, 0, &clk); + ret = clk_get_by_name(dev, "nand", &clk); + if (ret) + ret = clk_get_by_index(dev, 0, &clk); if (ret) return ret; + ret = clk_get_by_name(dev, "nand_x", &clk_x); + if (ret) + clk_x.dev = NULL; + + ret = clk_get_by_name(dev, "ecc", &clk_ecc); + if (ret) + clk_ecc.dev = NULL; + ret = clk_enable(&clk); if (ret) return ret; - denali->clk_x_rate = clk_get_rate(&clk); + if (clk_x.dev) { + ret = clk_enable(&clk_x); + if (ret) + return ret; + } + + if (clk_ecc.dev) { + ret = clk_enable(&clk_ecc); + if (ret) + return ret; + } + + if (clk_x.dev) { + denali->clk_rate = clk_get_rate(&clk); + denali->clk_x_rate = clk_get_rate(&clk_x); + } else { + /* + * Hardcode the clock rates for the backward compatibility. + * This works for both SOCFPGA and UniPhier. + */ + dev_notice(dev, + "necessary clock is missing. default clock rates are used.\n"); + denali->clk_rate = 50000000; + denali->clk_x_rate = 200000000; + } return denali_init(denali); } diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index 4009d64123..3104f879f6 100644 --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c @@ -61,6 +61,10 @@ struct nand_flash_dev nand_flash_ids[] = { {"SDTNRGAMA 64G 3.3V 8-bit", { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} }, SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) }, + {"H27UBG8T2BTR-BC 32G 3.3V 8-bit", + { .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} }, + SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, + NAND_ECC_INFO(40, SZ_1K), 0 }, {"H27UCG8T2ATR-BC 64G 3.3V 8-bit", { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c index 619d0403e9..3326c2b096 100644 --- a/drivers/mtd/nand/raw/vf610_nfc.c +++ b/drivers/mtd/nand/raw/vf610_nfc.c @@ -31,6 +31,11 @@ #include <nand.h> #include <errno.h> #include <asm/io.h> +#if CONFIG_NAND_VF610_NFC_DT +#include <dm.h> +#include <linux/io.h> +#include <linux/ioport.h> +#endif /* Register Offsets */ #define NFC_FLASH_CMD1 0x3F00 @@ -641,7 +646,7 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) .flash_bbt = 1, }; - nfc = malloc(sizeof(*nfc)); + nfc = calloc(1, sizeof(*nfc)); if (!nfc) { printf(KERN_ERR "%s: Memory exhausted!\n", __func__); return -ENOMEM; @@ -760,9 +765,51 @@ error: return err; } +#if CONFIG_NAND_VF610_NFC_DT +static const struct udevice_id vf610_nfc_dt_ids[] = { + { + .compatible = "fsl,vf610-nfc", + }, + { /* sentinel */ } +}; + +static int vf610_nfc_dt_probe(struct udevice *dev) +{ + struct resource res; + int ret; + + ret = dev_read_resource(dev, 0, &res); + if (ret) + return ret; + + return vf610_nfc_nand_init(0, devm_ioremap(dev, res.start, + resource_size(&res))); +} + +U_BOOT_DRIVER(vf610_nfc_dt) = { + .name = "vf610-nfc-dt", + .id = UCLASS_MTD, + .of_match = vf610_nfc_dt_ids, + .probe = vf610_nfc_dt_probe, +}; + +void board_nand_init(void) +{ + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MTD, + DM_GET_DRIVER(vf610_nfc_dt), + &dev); + if (ret && ret != -ENODEV) + pr_err("Failed to initialize NAND controller. (error %d)\n", + ret); +} +#else void board_nand_init(void) { int err = vf610_nfc_nand_init(0, (void __iomem *)CONFIG_SYS_NAND_BASE); if (err) printf("VF610 NAND init failed (err %d)\n", err); } +#endif /* CONFIG_NAND_VF610_NFC_DT */ diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 99c5c649a0..32fb34b793 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -604,7 +604,7 @@ static int fec_init(struct eth_device *dev, bd_t *bd) writel(0x00000000, &fec->eth->gaddr2); /* Do not access reserved register */ - if (!is_mx6ul() && !is_mx6ull() && !is_mx8m()) { + if (!is_mx6ul() && !is_mx6ull() && !is_imx8m()) { /* clear MIB RAM */ for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4) writel(0, i); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1dbe2b104b..30a6aa6ee8 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -238,6 +238,16 @@ config PINCTRL_ROCKCHIP_RK3399 the GPIO definitions and pin control functions for each available multiplex function. +config PINCTRL_ROCKCHIP_RK3399_FULL + bool "Rockchip rk3399 pin control driver (full)" + depends on PINCTRL_FULL && PINCTRL_ROCKCHIP_RK3399 + help + Support full pin multiplexing control on Rockchip rk3399 SoCs. + + This enables the full pinctrl driver for the RK3399. + Contrary to the non-full pinctrl driver, this will evaluate + the board DTB to get the pinctrl settings. + config PINCTRL_ROCKCHIP_RV1108 bool "Rockchip rv1108 pin control driver" depends on DM diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig index 799d1d2465..f1d5a5c50d 100644 --- a/drivers/pinctrl/nxp/Kconfig +++ b/drivers/pinctrl/nxp/Kconfig @@ -74,3 +74,17 @@ config PINCTRL_IMX8 is different from the linux one, this is a simple implementation, only parses the 'fsl,pins' property and configures related registers. + +config PINCTRL_VYBRID + bool "Vybrid (vf610) pinctrl driver" + depends on ARCH_VF610 && PINCTRL_FULL + select DEVRES + select PINCTRL_IMX + help + Say Y here to enable the Vybrid (vf610) pinctrl driver + + This provides a simple pinctrl driver for Vybrid SoC familiy, + vf610. This feature depends on device tree + configuration. This driver is different from the linux one, + this is a simple implementation, only parses the 'fsl,pins' + property and configure related registers. diff --git a/drivers/pinctrl/nxp/Makefile b/drivers/pinctrl/nxp/Makefile index 310b3b3a2e..891ee6e477 100644 --- a/drivers/pinctrl/nxp/Makefile +++ b/drivers/pinctrl/nxp/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PINCTRL_IMX7) += pinctrl-imx7.o obj-$(CONFIG_PINCTRL_IMX7ULP) += pinctrl-imx7ulp.o obj-$(CONFIG_PINCTRL_IMX_SCU) += pinctrl-scu.o obj-$(CONFIG_PINCTRL_IMX8) += pinctrl-imx8.o +obj-$(CONFIG_PINCTRL_VYBRID) += pinctrl-vf610.o diff --git a/drivers/pinctrl/nxp/pinctrl-vf610.c b/drivers/pinctrl/nxp/pinctrl-vf610.c new file mode 100644 index 0000000000..e795b5fd8a --- /dev/null +++ b/drivers/pinctrl/nxp/pinctrl-vf610.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 DENX Software Engineering + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +#include <common.h> +#include <dm.h> +#include <dm/pinctrl.h> + +#include "pinctrl-imx.h" + +static struct imx_pinctrl_soc_info vf610_pinctrl_soc_info = { + .flags = SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID, +}; + +static int vf610_pinctrl_probe(struct udevice *dev) +{ + struct imx_pinctrl_soc_info *info = + (struct imx_pinctrl_soc_info *)dev_get_driver_data(dev); + + return imx_pinctrl_probe(dev, info); +} + +static const struct udevice_id vf610_pinctrl_match[] = { + { .compatible = "fsl,vf610-iomuxc", + .data = (ulong)&vf610_pinctrl_soc_info }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(vf610_pinctrl) = { + .name = "vf610-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = of_match_ptr(vf610_pinctrl_match), + .probe = vf610_pinctrl_probe, + .remove = imx_pinctrl_remove, + .priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv), + .ops = &imx_pinctrl_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c index 29c910c55f..c8b38d78f6 100644 --- a/drivers/pinctrl/pinctrl-uclass.c +++ b/drivers/pinctrl/pinctrl-uclass.c @@ -27,6 +27,28 @@ int pinctrl_decode_pin_config(const void *blob, int node) return flags; } +/* + * TODO: this function is temporary for v2019.01. + * It should be renamed to pinctrl_decode_pin_config(), + * the original pinctrl_decode_pin_config() function should + * be removed and all callers of the original function should + * be migrated to use the new one. + */ +int pinctrl_decode_pin_config_dm(struct udevice *dev) +{ + int pinconfig = 0; + + if (dev->uclass->uc_drv->id != UCLASS_PINCONFIG) + return -EINVAL; + + if (dev_read_bool(dev, "bias-pull-up")) + pinconfig |= 1 << PIN_CONFIG_BIAS_PULL_UP; + else if (dev_read_bool(dev, "bias-pull-down")) + pinconfig |= 1 << PIN_CONFIG_BIAS_PULL_DOWN; + + return pinconfig; +} + #if CONFIG_IS_ENABLED(PINCTRL_FULL) /** * pinctrl_config_one() - apply pinctrl settings for a single node diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3399.c b/drivers/pinctrl/rockchip/pinctrl_rk3399.c index bc92dd7c06..c4746b0122 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3399.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3399.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * (C) 2018 Theobroma Systems Design und Consulting GmbH */ #include <common.h> @@ -14,11 +15,240 @@ #include <asm/arch/clock.h> #include <dm/pinctrl.h> +#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL) +static const u32 RK_GRF_P_PULLUP = 1; +static const u32 RK_GRF_P_PULLDOWN = 2; +#endif /* PINCTRL_ROCKCHIP_RK3399_FULL */ + struct rk3399_pinctrl_priv { struct rk3399_grf_regs *grf; struct rk3399_pmugrf_regs *pmugrf; + struct rockchip_pin_bank *banks; +}; + +#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL) +/* Location of pinctrl/pinconf registers. */ +enum rk_grf_location { + RK_GRF, + RK_PMUGRF, +}; + +/** + * @nr_pins: number of pins in this bank + * @grf_location: location of pinctrl/pinconf registers + * @bank_num: number of the bank, to account for holes + * @iomux: array describing the 4 iomux sources of the bank + */ +struct rockchip_pin_bank { + u8 nr_pins; + enum rk_grf_location grf_location; + size_t iomux_offset; + size_t pupd_offset; +}; + +#define PIN_BANK(pins, grf, iomux, pupd) \ + { \ + .nr_pins = pins, \ + .grf_location = grf, \ + .iomux_offset = iomux, \ + .pupd_offset = pupd, \ + } + +static struct rockchip_pin_bank rk3399_pin_banks[] = { + PIN_BANK(16, RK_PMUGRF, + offsetof(struct rk3399_pmugrf_regs, gpio0a_iomux), + offsetof(struct rk3399_pmugrf_regs, gpio0_p)), + PIN_BANK(32, RK_PMUGRF, + offsetof(struct rk3399_pmugrf_regs, gpio1a_iomux), + offsetof(struct rk3399_pmugrf_regs, gpio1_p)), + PIN_BANK(32, RK_GRF, + offsetof(struct rk3399_grf_regs, gpio2a_iomux), + offsetof(struct rk3399_grf_regs, gpio2_p)), + PIN_BANK(32, RK_GRF, + offsetof(struct rk3399_grf_regs, gpio3a_iomux), + offsetof(struct rk3399_grf_regs, gpio3_p)), + PIN_BANK(32, RK_GRF, + offsetof(struct rk3399_grf_regs, gpio4a_iomux), + offsetof(struct rk3399_grf_regs, gpio4_p)), }; +static void rk_pinctrl_get_info(uintptr_t base, u32 index, uintptr_t *addr, + u32 *shift, u32 *mask) +{ + /* + * In general we four subsequent 32-bit configuration registers + * per bank (e.g. GPIO2A_P, GPIO2B_P, GPIO2C_P, GPIO2D_P). + * The configuration for each pin has two bits. + * + * @base...contains the address to the first register. + * @index...defines the pin within the bank (0..31). + * @addr...will be the address of the actual register to use + * @shift...will be the bit position in the configuration register + * @mask...will be the (unshifted) mask + */ + + const u32 pins_per_register = 8; + const u32 config_bits_per_pin = 2; + + /* Get the address of the configuration register. */ + *addr = base + (index / pins_per_register) * sizeof(u32); + + /* Get the bit offset within the configuration register. */ + *shift = (index & (pins_per_register - 1)) * config_bits_per_pin; + + /* Get the (unshifted) mask for the configuration pins. */ + *mask = ((1 << config_bits_per_pin) - 1); + + pr_debug("%s: addr=0x%lx, mask=0x%x, shift=0x%x\n", + __func__, *addr, *mask, *shift); +} + +static void rk3399_pinctrl_set_pin_iomux(uintptr_t grf_addr, + struct rockchip_pin_bank *bank, + u32 index, u32 muxval) +{ + uintptr_t iomux_base, addr; + u32 shift, mask; + + iomux_base = grf_addr + bank->iomux_offset; + rk_pinctrl_get_info(iomux_base, index, &addr, &shift, &mask); + + /* Set pinmux register */ + rk_clrsetreg(addr, mask << shift, muxval << shift); +} + +static void rk3399_pinctrl_set_pin_pupd(uintptr_t grf_addr, + struct rockchip_pin_bank *bank, + u32 index, int pinconfig) +{ + uintptr_t pupd_base, addr; + u32 shift, mask, pupdval; + + /* Fast path in case there's nothing to do. */ + if (!pinconfig) + return; + + if (pinconfig & (1 << PIN_CONFIG_BIAS_PULL_UP)) + pupdval = RK_GRF_P_PULLUP; + else if (pinconfig & (1 << PIN_CONFIG_BIAS_PULL_DOWN)) + pupdval = RK_GRF_P_PULLDOWN; + else + /* Flag not supported. */ + pr_warn("%s: Unsupported pinconfig flag: 0x%x\n", __func__, + pinconfig); + return; + + pupd_base = grf_addr + (uintptr_t)bank->pupd_offset; + rk_pinctrl_get_info(pupd_base, index, &addr, &shift, &mask); + + /* Set pull-up/pull-down regisrer */ + rk_clrsetreg(addr, mask << shift, pupdval << shift); +} + +static int rk3399_pinctrl_set_pin(struct udevice *dev, u32 banknum, u32 index, + u32 muxval, int pinconfig) +{ + struct rk3399_pinctrl_priv *priv = dev_get_priv(dev); + struct rockchip_pin_bank *bank = &priv->banks[banknum]; + uintptr_t grf_addr; + + pr_debug("%s: 0x%x 0x%x 0x%x 0x%x\n", __func__, banknum, index, muxval, + pinconfig); + + if (bank->grf_location == RK_GRF) + grf_addr = (uintptr_t)priv->grf; + else if (bank->grf_location == RK_PMUGRF) + grf_addr = (uintptr_t)priv->pmugrf; + else + return -EINVAL; + + rk3399_pinctrl_set_pin_iomux(grf_addr, bank, index, muxval); + + rk3399_pinctrl_set_pin_pupd(grf_addr, bank, index, pinconfig); + return 0; +} + +static int rk3399_pinctrl_set_state(struct udevice *dev, struct udevice *config) +{ + /* + * The order of the fields in this struct must match the order of + * the fields in the "rockchip,pins" property. + */ + struct rk_pin { + u32 banknum; + u32 index; + u32 muxval; + u32 phandle; + } __packed; + + u32 *fields = NULL; + const int fields_per_pin = 4; + int num_fields, num_pins; + int ret; + int size; + int i; + struct rk_pin *pin; + + pr_debug("%s: %s\n", __func__, config->name); + + size = dev_read_size(config, "rockchip,pins"); + if (size < 0) + return -EINVAL; + + num_fields = size / sizeof(u32); + num_pins = num_fields / fields_per_pin; + + if (num_fields * sizeof(u32) != size || + num_pins * fields_per_pin != num_fields) { + pr_warn("Invalid number of rockchip,pins fields.\n"); + return -EINVAL; + } + + fields = calloc(num_fields, sizeof(u32)); + if (!fields) + return -ENOMEM; + + ret = dev_read_u32_array(config, "rockchip,pins", fields, num_fields); + if (ret) { + pr_warn("%s: Failed to read rockchip,pins fields.\n", + config->name); + goto end; + } + + pin = (struct rk_pin *)fields; + for (i = 0; i < num_pins; i++, pin++) { + struct udevice *dev_pinconfig; + int pinconfig; + + ret = uclass_get_device_by_phandle_id(UCLASS_PINCONFIG, + pin->phandle, + &dev_pinconfig); + if (ret) { + pr_debug("Could not get pinconfig device\n"); + goto end; + } + + pinconfig = pinctrl_decode_pin_config_dm(dev_pinconfig); + if (pinconfig < 0) { + pr_warn("Could not parse pinconfig\n"); + goto end; + } + + ret = rk3399_pinctrl_set_pin(dev, pin->banknum, pin->index, + pin->muxval, pinconfig); + if (ret) { + pr_warn("Could not set pinctrl settings\n"); + goto end; + } + } + +end: + free(fields); + return ret; +} + +#endif /* PINCTRL_ROCKCHIP_RK3399_FULL */ + static void pinctrl_rk3399_pwm_config(struct rk3399_grf_regs *grf, struct rk3399_pmugrf_regs *pmugrf, int pwm_id) { @@ -468,6 +698,9 @@ static int rk3399_pinctrl_set_state_simple(struct udevice *dev, } static struct pinctrl_ops rk3399_pinctrl_ops = { +#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL) + .set_state = rk3399_pinctrl_set_state, +#endif .set_state_simple = rk3399_pinctrl_set_state_simple, .request = rk3399_pinctrl_request, .get_periph_id = rk3399_pinctrl_get_periph_id, @@ -481,6 +714,9 @@ static int rk3399_pinctrl_probe(struct udevice *dev) priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); debug("%s: grf=%p, pmugrf=%p\n", __func__, priv->grf, priv->pmugrf); +#if CONFIG_IS_ENABLED(PINCTRL_ROCKCHIP_RK3399_FULL) + priv->banks = rk3399_pin_banks; +#endif /* PINCTRL_ROCKCHIP_RK3399_FULL */ return ret; } diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index 09b311de8b..3ed0dd2264 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -61,6 +61,13 @@ config REGULATOR_PWM This driver is controlled by a device tree node which includes voltage limits. +config SPL_REGULATOR_PWM + bool "Enable Driver for PWM regulators in SPL" + depends on REGULATOR_PWM + help + This config enables implementation of driver-model regulator uclass + features for PWM regulators in SPL. + config DM_REGULATOR_MAX77686 bool "Enable Driver Model for REGULATOR MAX77686" depends on DM_REGULATOR && DM_PMIC_MAX77686 diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index 8017045d54..f617ce723a 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o -obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o +obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o diff --git a/drivers/ram/rockchip/sdram_rk3128.c b/drivers/ram/rockchip/sdram_rk3128.c index 4968900211..df7b988703 100644 --- a/drivers/ram/rockchip/sdram_rk3128.c +++ b/drivers/ram/rockchip/sdram_rk3128.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd. */ diff --git a/drivers/ram/rockchip/sdram_rk3188.c b/drivers/ram/rockchip/sdram_rk3188.c index 3774abfa98..fdd500aa47 100644 --- a/drivers/ram/rockchip/sdram_rk3188.c +++ b/drivers/ram/rockchip/sdram_rk3188.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * (C) Copyright 2015 Google, Inc * Copyright 2014 Rockchip Inc. diff --git a/drivers/ram/rockchip/sdram_rk322x.c b/drivers/ram/rockchip/sdram_rk322x.c index e079ef7a70..53835a9cd0 100644 --- a/drivers/ram/rockchip/sdram_rk322x.c +++ b/drivers/ram/rockchip/sdram_rk322x.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd */ diff --git a/drivers/ram/rockchip/sdram_rk3288.c b/drivers/ram/rockchip/sdram_rk3288.c index bb3cf48788..d1e52d84e7 100644 --- a/drivers/ram/rockchip/sdram_rk3288.c +++ b/drivers/ram/rockchip/sdram_rk3288.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * (C) Copyright 2015 Google, Inc * Copyright 2014 Rockchip Inc. diff --git a/drivers/ram/rockchip/sdram_rk3328.c b/drivers/ram/rockchip/sdram_rk3328.c index 89d95b4f89..e8b234d866 100644 --- a/drivers/ram/rockchip/sdram_rk3328.c +++ b/drivers/ram/rockchip/sdram_rk3328.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd. */ diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 49ebd8809f..94dd01156a 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause /* * (C) Copyright 2016-2017 Rockchip Inc. * diff --git a/drivers/spi/sun4i_spi.c b/drivers/spi/sun4i_spi.c index b86b5a00ad..38cc743c61 100644 --- a/drivers/spi/sun4i_spi.c +++ b/drivers/spi/sun4i_spi.c @@ -129,7 +129,8 @@ static inline void sun4i_spi_drain_fifo(struct sun4i_spi_priv *priv, int len) while (len--) { byte = readb(&priv->regs->rxdata); - *priv->rx_buf++ = byte; + if (priv->rx_buf) + *priv->rx_buf++ = byte; } } diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index d6e045739d..031bab25ae 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -20,6 +20,20 @@ config W1_GPIO help Emulate a 1-wire bus using a GPIO. +config W1_MXC + bool "Enable 1-wire controller on i.MX processors" + default no + depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5 + help + Support the one wire controller found in some members of the NXP + i.MX SoC family. + There are currently two silicon variants: + V1: i.MX21, i.MX27, i.MX31, i.MX51 + V2: i.MX25, i.MX35, i.MX50, i.MX53 + Newer i.MX SoCs such as the i.MX6 do not have one wire controllers. + + The driver supports both silicon variants. + endif endmenu diff --git a/drivers/w1/Makefile b/drivers/w1/Makefile index 7fd8697f84..9825187b65 100644 --- a/drivers/w1/Makefile +++ b/drivers/w1/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_W1) += w1-uclass.o obj-$(CONFIG_W1_GPIO) += w1-gpio.o +obj-$(CONFIG_W1_MXC) += mxc_w1.o diff --git a/drivers/w1/mxc_w1.c b/drivers/w1/mxc_w1.c new file mode 100644 index 0000000000..9279ba32b8 --- /dev/null +++ b/drivers/w1/mxc_w1.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for one wire controller in some i.MX Socs + * + * There are currently two silicon variants: + * V1: i.MX21, i.MX27, i.MX31, i.MX51 + * V2: i.MX25, i.MX35, i.MX50, i.MX53 + * Newer i.MX SoCs such as the i.MX6 do not have one wire controllers. + * + * The V1 controller only supports single bit operations. + * The V2 controller is backwards compatible on the register level but adds + * byte size operations and a "search ROM accelerator mode" + * + * This driver does not currently support the search ROM accelerator + * + * Copyright (c) 2018 Flowbird + * Martin Fuzzey <martin.fuzzey@flowbird.group> + */ + +#include <asm/arch/clock.h> +#include <common.h> +#include <dm.h> +#include <linux/io.h> +#include <w1.h> + +struct mxc_w1_regs { + u16 control; +#define MXC_W1_CONTROL_RPP BIT(7) +#define MXC_W1_CONTROL_PST BIT(6) +#define MXC_W1_CONTROL_WR(x) BIT(5 - (x)) +#define MXC_W1_CONTROL_RDST BIT(3) + + u16 time_divider; + u16 reset; + + /* Registers below on V2 silicon only */ + u16 command; + u16 tx_rx; + u16 interrupt; +#define MXC_W1_INTERRUPT_TBE BIT(2) +#define MXC_W1_INTERRUPT_TSRE BIT(3) +#define MXC_W1_INTERRUPT_RBF BIT(4) +#define MXC_W1_INTERRUPT_RSRF BIT(5) + + u16 interrupt_en; +}; + +struct mxc_w1_pdata { + struct mxc_w1_regs *regs; +}; + +/* + * this is the low level routine to read/write a bit on the One Wire + * interface on the hardware. It does write 0 if parameter bit is set + * to 0, otherwise a write 1/read. + */ +static u8 mxc_w1_touch_bit(struct mxc_w1_pdata *pdata, u8 bit) +{ + u16 *ctrl_addr = &pdata->regs->control; + u16 mask = MXC_W1_CONTROL_WR(bit); + unsigned int timeout_cnt = 400; /* Takes max. 120us according to + * datasheet. + */ + + writew(mask, ctrl_addr); + + while (timeout_cnt--) { + if (!(readw(ctrl_addr) & mask)) + break; + + udelay(1); + } + + return (readw(ctrl_addr) & MXC_W1_CONTROL_RDST) ? 1 : 0; +} + +static u8 mxc_w1_read_byte(struct udevice *dev) +{ + struct mxc_w1_pdata *pdata = dev_get_platdata(dev); + struct mxc_w1_regs *regs = pdata->regs; + u16 status; + + if (dev_get_driver_data(dev) < 2) { + int i; + u8 ret = 0; + + for (i = 0; i < 8; i++) + ret |= (mxc_w1_touch_bit(pdata, 1) << i); + + return ret; + } + + readw(®s->tx_rx); + writew(0xFF, ®s->tx_rx); + + do { + udelay(1); /* Without this bytes are sometimes duplicated... */ + status = readw(®s->interrupt); + } while (!(status & MXC_W1_INTERRUPT_RBF)); + + return (u8)readw(®s->tx_rx); +} + +static void mxc_w1_write_byte(struct udevice *dev, u8 byte) +{ + struct mxc_w1_pdata *pdata = dev_get_platdata(dev); + struct mxc_w1_regs *regs = pdata->regs; + u16 status; + + if (dev_get_driver_data(dev) < 2) { + int i; + + for (i = 0; i < 8; i++) + mxc_w1_touch_bit(pdata, (byte >> i) & 0x1); + + return; + } + + readw(®s->tx_rx); + writew(byte, ®s->tx_rx); + + do { + udelay(1); + status = readw(®s->interrupt); + } while (!(status & MXC_W1_INTERRUPT_TSRE)); +} + +static bool mxc_w1_reset(struct udevice *dev) +{ + struct mxc_w1_pdata *pdata = dev_get_platdata(dev); + u16 reg_val; + + writew(MXC_W1_CONTROL_RPP, &pdata->regs->control); + + do { + reg_val = readw(&pdata->regs->control); + } while (reg_val & MXC_W1_CONTROL_RPP); + + return !(reg_val & MXC_W1_CONTROL_PST); +} + +static u8 mxc_w1_triplet(struct udevice *dev, bool bdir) +{ + struct mxc_w1_pdata *pdata = dev_get_platdata(dev); + u8 id_bit = mxc_w1_touch_bit(pdata, 1); + u8 comp_bit = mxc_w1_touch_bit(pdata, 1); + u8 retval; + + if (id_bit && comp_bit) + return 0x03; /* error */ + + if (!id_bit && !comp_bit) { + /* Both bits are valid, take the direction given */ + retval = bdir ? 0x04 : 0; + } else { + /* Only one bit is valid, take that direction */ + bdir = id_bit; + retval = id_bit ? 0x05 : 0x02; + } + + mxc_w1_touch_bit(pdata, bdir); + + return retval; +} + +static int mxc_w1_ofdata_to_platdata(struct udevice *dev) +{ + struct mxc_w1_pdata *pdata = dev_get_platdata(dev); + fdt_addr_t addr; + + addr = devfdt_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + pdata->regs = (struct mxc_w1_regs *)addr; + + return 0; +}; + +static int mxc_w1_probe(struct udevice *dev) +{ + struct mxc_w1_pdata *pdata = dev_get_platdata(dev); + unsigned int clkrate = mxc_get_clock(MXC_IPG_PERCLK); + unsigned int clkdiv; + + if (clkrate < 10000000) { + dev_err(dev, "input clock frequency (%u Hz) too low\n", + clkrate); + return -EINVAL; + } + + clkdiv = clkrate / 1000000; + clkrate /= clkdiv; + if (clkrate < 980000 || clkrate > 1020000) { + dev_err(dev, "Incorrect time base frequency %u Hz\n", clkrate); + return -EINVAL; + } + + writew(clkdiv - 1, &pdata->regs->time_divider); + + return 0; +} + +static const struct w1_ops mxc_w1_ops = { + .read_byte = mxc_w1_read_byte, + .reset = mxc_w1_reset, + .triplet = mxc_w1_triplet, + .write_byte = mxc_w1_write_byte, +}; + +static const struct udevice_id mxc_w1_id[] = { + { .compatible = "fsl,imx21-owire", .data = 1 }, + { .compatible = "fsl,imx27-owire", .data = 1 }, + { .compatible = "fsl,imx31-owire", .data = 1 }, + { .compatible = "fsl,imx51-owire", .data = 1 }, + + { .compatible = "fsl,imx25-owire", .data = 2 }, + { .compatible = "fsl,imx35-owire", .data = 2 }, + { .compatible = "fsl,imx50-owire", .data = 2 }, + { .compatible = "fsl,imx53-owire", .data = 2 }, + { }, +}; + +U_BOOT_DRIVER(mxc_w1_drv) = { + .id = UCLASS_W1, + .name = "mxc_w1_drv", + .of_match = mxc_w1_id, + .ofdata_to_platdata = mxc_w1_ofdata_to_platdata, + .ops = &mxc_w1_ops, + .platdata_auto_alloc_size = sizeof(struct mxc_w1_pdata), + .probe = mxc_w1_probe, +}; diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b6974ad619..10fd3039aa 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -11,6 +11,12 @@ config WATCHDOG config HW_WATCHDOG bool +config WATCHDOG_RESET_DISABLE + bool "Disable reset watchdog" + help + Disable reset watchdog, which can let WATCHDOG_RESET invalid, so + that the watchdog will not be fed in u-boot. + config BCM2835_WDT bool "Enable BCM2835/2836 watchdog driver" select HW_WATCHDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 74738eeaf7..d901240ad1 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -7,6 +7,8 @@ obj-$(CONFIG_WDT_AT91) += at91sam9_wdt.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o ifneq (,$(filter $(SOC), mx25 mx31 mx35 mx5 mx6 mx7 vf610)) obj-y += imx_watchdog.o +else +obj-$(CONFIG_IMX_WATCHDOG) += imx_watchdog.o endif obj-$(CONFIG_S5P) += s5p_wdt.o obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c index 3f826d10eb..14cc618074 100644 --- a/drivers/watchdog/imx_watchdog.c +++ b/drivers/watchdog/imx_watchdog.c @@ -8,15 +8,20 @@ #include <asm/io.h> #include <watchdog.h> #include <asm/arch/imx-regs.h> +#ifdef CONFIG_FSL_LSCH2 +#include <asm/arch/immap_lsch2.h> +#endif #include <fsl_wdog.h> #ifdef CONFIG_IMX_WATCHDOG void hw_watchdog_reset(void) { +#ifndef CONFIG_WATCHDOG_RESET_DISABLE struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; writew(0x5555, &wdog->wsr); writew(0xaaaa, &wdog->wsr); +#endif /* CONFIG_WATCHDOG_RESET_DISABLE*/ } void hw_watchdog_init(void) @@ -33,8 +38,12 @@ void hw_watchdog_init(void) #define CONFIG_WATCHDOG_TIMEOUT_MSECS 128000 #endif timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1; +#ifdef CONFIG_FSL_LSCH2 + writew((WCR_WDA | WCR_SRS | WCR_WDE) << 8 | timeout, &wdog->wcr); +#else writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS | WCR_WDA | SET_WCR_WT(timeout), &wdog->wcr); +#endif /* CONFIG_FSL_LSCH2*/ hw_watchdog_reset(); } #endif diff --git a/fs/cbfs/cbfs.c b/fs/cbfs/cbfs.c index 0dce639b49..7b2513cb24 100644 --- a/fs/cbfs/cbfs.c +++ b/fs/cbfs/cbfs.c @@ -96,8 +96,7 @@ static int file_cbfs_next_file(u8 *start, u32 size, u32 align, } swap_file_header(&header, fileHeader); - if (header.offset < sizeof(struct cbfs_fileheader) || - header.offset > header.len) { + if (header.offset < sizeof(struct cbfs_fileheader)) { file_cbfs_result = CBFS_BAD_FILE; return -1; } @@ -190,8 +189,8 @@ void file_cbfs_init(uintptr_t end_of_rom) start_of_rom = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size); - file_cbfs_fill_cache(start_of_rom + cbfs_header.offset, - cbfs_header.rom_size, cbfs_header.align); + file_cbfs_fill_cache(start_of_rom, cbfs_header.rom_size, + cbfs_header.align); if (file_cbfs_result == CBFS_SUCCESS) initialized = 1; } diff --git a/include/bootm.h b/include/bootm.h index 0501414e0d..dbd6f49c2d 100644 --- a/include/bootm.h +++ b/include/bootm.h @@ -35,6 +35,8 @@ typedef int boot_os_fn(int flag, int argc, char * const argv[], bootm_headers_t *images); extern boot_os_fn do_bootm_linux; +extern boot_os_fn do_bootm_vxworks; + int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); void lynxkdi_boot(image_header_t *hdr); diff --git a/include/cbfs.h b/include/cbfs.h index 1b88ec04ae..bd1bf75bbf 100644 --- a/include/cbfs.h +++ b/include/cbfs.h @@ -18,16 +18,26 @@ enum cbfs_result { }; enum cbfs_filetype { + CBFS_TYPE_BOOTBLOCK = 0x01, + CBFS_TYPE_CBFSHEADER = 0x02, CBFS_TYPE_STAGE = 0x10, CBFS_TYPE_PAYLOAD = 0x20, + CBFS_TYPE_FIT = 0x21, CBFS_TYPE_OPTIONROM = 0x30, CBFS_TYPE_BOOTSPLASH = 0x40, CBFS_TYPE_RAW = 0x50, CBFS_TYPE_VSA = 0x51, CBFS_TYPE_MBI = 0x52, CBFS_TYPE_MICROCODE = 0x53, - CBFS_COMPONENT_CMOS_DEFAULT = 0xaa, - CBFS_COMPONENT_CMOS_LAYOUT = 0x01aa + CBFS_TYPE_FSP = 0x60, + CBFS_TYPE_MRC = 0x61, + CBFS_TYPE_MMA = 0x62, + CBFS_TYPE_EFI = 0x63, + CBFS_TYPE_STRUCT = 0x70, + CBFS_TYPE_CMOS_DEFAULT = 0xaa, + CBFS_TYPE_SPD = 0xab, + CBFS_TYPE_MRC_CACHE = 0xac, + CBFS_TYPE_CMOS_LAYOUT = 0x01aa }; struct cbfs_header { diff --git a/include/configs/edison.h b/include/configs/edison.h index 86c584d73d..a6155ba5a8 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -8,13 +8,6 @@ #include <asm/ibmpc.h> -/* ACPI */ - -/* Boot */ -#define CONFIG_BOOTCOMMAND "run bootcmd" - -/* DISK Partition support */ - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 2048 @@ -43,9 +36,6 @@ #define CONFIG_ENV_OFFSET_REDUND (6 * 1024 * 1024) #define CONFIG_SUPPORT_EMMC_BOOT -/* PCI */ -#define CONFIG_CMD_PCI - /* RTC */ #define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 71217f07e2..7e7de4dae6 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -109,6 +109,19 @@ #include "mx6_common.h" +#ifdef CONFIG_SPL +#include "imx6_spl.h" +/* RiOTboard */ +#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000 +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb" + +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* offset 69KB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* offset 69KB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */ + +#endif + /* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt, * 1M script, 1M pxe and the ramdisk at the end */ #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h new file mode 100644 index 0000000000..35f81152f2 --- /dev/null +++ b/include/configs/imx8mq_evk.h @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __IMX8M_EVK_H +#define __IMX8M_EVK_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_CSF_SIZE 0x2000 /* 8K region */ +#endif + +#define CONFIG_SPL_TEXT_BASE 0x7E1000 +#define CONFIG_SPL_MAX_SIZE (124 * 1024) +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 + +#ifdef CONFIG_SPL_BUILD +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x187FF0 +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_BSS_START_ADDR 0x00180000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */ +#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000 +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ +#define CONFIG_MALLOC_F_ADDR 0x182000 +/* For RAW image gives a error info not panic */ +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#undef CONFIG_DM_MMC +#undef CONFIG_DM_PMIC +#undef CONFIG_DM_PMIC_PFUZE100 + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 +#endif + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD + +/* ENET Config */ +/* ENET1 */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_MII +#define CONFIG_ETHPRIME "FEC" + +#define CONFIG_FEC_MXC +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define FEC_QUIRK_ENET_MAC + +#define CONFIG_PHY_GIGE +#define IMX_FEC_BASE 0x30BE0000 + +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS +#endif + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + "clk_ignore_unused "\ + "\0" \ + "initrd_addr=0x43800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=Image\0" \ + "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \ + "fdt_addr=0x43000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "boot_fdt=try\0" \ + "fdt_file=fsl-imx8mq-evk.dtb\0" \ + "initrd_addr=0x43800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "echo wait for boot; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${loadaddr} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "booti; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else booti ${loadaddr} - ${fdt_addr}; fi" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x40480000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_OFFSET (64 * SZ_64K) +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define PHYS_SDRAM 0x40000000 +#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + (PHYS_SDRAM_SIZE >> 1)) + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR + +/* Monitor Command Prompt */ +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "u-boot=> " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_IMX_BOOTAUX + +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC + +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT + +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_OCOTP +#define CONFIG_CMD_FUSE + +/* I2C Configs */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_OF_SYSTEM_SETUP + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM_PMIC +#endif + +#endif diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index 49048c163f..b9bc08b388 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -55,6 +55,7 @@ #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_USE_FLASH_BBT #endif /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index 2bc42a04a0..1884c5844d 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -134,7 +134,19 @@ /* FLASH and environment organization */ #define CONFIG_ENV_SIZE SZ_8K -#define CONFIG_ENV_OFFSET (8 * SZ_64K) +/* Environment starts at 768k = 768 * 1024 = 786432 */ +#define CONFIG_ENV_OFFSET 786432 +/* + * Detect overlap between U-Boot image and environment area in build-time + * + * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset + * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776 + * + * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so + * write the direct value here + */ +#define CONFIG_BOARD_SIZE_LIMIT 715776 + #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_MMC_ENV_DEV 0 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 70f8712b60..95d6452553 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -124,6 +124,8 @@ "third_image=u-boot.bin\0" #endif +#define CONFIG_PREBOOT "env exist ${bootdev}preboot && run ${bootdev}preboot" + #define CONFIG_ROOTPATH "/nfs/root/path" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs $bootargs root=/dev/nfs rw " \ @@ -169,8 +171,32 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "initrd_high=0xffffffffffffffff\0" \ + "script=boot.scr\0" \ "scriptaddr=0x85000000\0" \ "nor_base=0x42000000\0" \ + "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \ + "nandboot=run bootcmd_ubifs0\0" \ + "norboot=run tftpboot\0" \ + "usbboot=run bootcmd_usb0\0" \ + "emmcscript=setenv devtype mmc && " \ + "mmcsetn && " \ + "setenv devnum ${mmc_first_dev} && " \ + "run loadscript_fat\0" \ + "nandscript=echo Running ${script} from ubi ... && " \ + "ubi part UBI && " \ + "ubifsmount ubi0:boot && " \ + "ubifsload ${loadaddr} ${script} && " \ + "source\0" \ + "norscript=echo Running ${script} from tftp ... && " \ + "tftpboot ${script} &&" \ + "source\0" \ + "usbscript=usb start && " \ + "setenv devtype usb && " \ + "setenv devnum 0 && " \ + "run loadscript_fat\0" \ + "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \ + "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \ + "source\0" \ "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ "tftpboot $tmp_addr $second_image && " \ "setexpr tmp_addr $nor_base + 0x70000 && " \ diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 63a7d55b88..ff2b82e7c2 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -355,6 +355,18 @@ int pinctrl_get_periph_id(struct udevice *dev, struct udevice *periph); int pinctrl_decode_pin_config(const void *blob, int node); /** + * pinctrl_decode_pin_config_dm() - decode pin configuration flags + * + * This decodes some of the PIN_CONFIG values into flags, with each value + * being (1 << pin_cfg). This does not support things with values like the + * slew rate. + * + * @pinconfig: Pinconfig udevice + * @return decoded flag value, or -ve on error + */ +int pinctrl_decode_pin_config_dm(struct udevice *dev); + +/** * pinctrl_get_gpio_mux() - get the mux value for a particular GPIO * * This allows the raw mux value for a GPIO to be obtained. It is diff --git a/include/imximage.h b/include/imximage.h index 6f7ca7f5e3..544babb53a 100644 --- a/include/imximage.h +++ b/include/imximage.h @@ -33,6 +33,7 @@ #define FLASH_OFFSET_NOR 0x1000 #define FLASH_OFFSET_SATA FLASH_OFFSET_STANDARD #define FLASH_OFFSET_QSPI 0x1000 +#define FLASH_OFFSET_FLEXSPI 0x1000 /* Initial Load Region Size */ #define FLASH_LOADSIZE_UNDEFINED 0xFFFFFFFF @@ -48,6 +49,7 @@ /* Command tags and parameters */ #define IVT_HEADER_TAG 0xD1 #define IVT_VERSION 0x40 +#define IVT_VERSION_V3 0x41 #define DCD_HEADER_TAG 0xD2 #define DCD_VERSION 0x40 #define DCD_WRITE_DATA_COMMAND_TAG 0xCC @@ -71,6 +73,12 @@ enum imximage_cmd { CMD_CHECK_BITS_CLR, CMD_CSF, CMD_PLUGIN, + /* Follwoing on i.MX8MQ/MM */ + CMD_FIT, + CMD_SIGNED_HDMI, + CMD_LOADER, + CMD_SECOND_LOADER, + CMD_DDR_FW, }; enum imximage_fld_types { @@ -84,7 +92,8 @@ enum imximage_fld_types { enum imximage_version { IMXIMAGE_VER_INVALID = -1, IMXIMAGE_V1 = 1, - IMXIMAGE_V2 + IMXIMAGE_V2, + IMXIMAGE_V3 }; typedef struct { @@ -177,6 +186,12 @@ typedef struct { } data; } imx_header_v2_t; +typedef struct { + flash_header_v2_t fhdr; + boot_data_t boot_data; + uint32_t padding[5]; +} imx_header_v3_t; + /* The header must be aligned to 4k on MX53 for NAND boot */ struct imx_header { union { diff --git a/include/linux/kernel.h b/include/linux/kernel.h index bd88483b9f..a85c15d8dc 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -102,6 +102,18 @@ (((__x) - ((__d) / 2)) / (__d)); \ } \ ) +/* + * Same as above but for u64 dividends. divisor must be a 32-bit + * number. + */ +#define DIV_ROUND_CLOSEST_ULL(x, divisor)( \ +{ \ + typeof(divisor) __d = divisor; \ + unsigned long long _tmp = (x) + (__d) / 2; \ + do_div(_tmp, __d); \ + _tmp; \ +} \ +) /* * Multiplies an integer by a fraction, while avoiding unnecessary diff --git a/include/spl.h b/include/spl.h index ff4e6277d3..c82f2fd033 100644 --- a/include/spl.h +++ b/include/spl.h @@ -118,6 +118,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, struct spl_load_info *info, ulong sector, void *fdt); #define SPL_COPY_PAYLOAD_ONLY 1 +#define SPL_FIT_FOUND 2 /* SPL common functions */ void preloader_console_init(void); @@ -353,6 +354,18 @@ void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3); void board_return_to_bootrom(void); /** + * board_spl_fit_post_load - allow process images after loading finished + * + */ +void board_spl_fit_post_load(ulong load_addr, size_t length); + +/** + * board_spl_fit_size_align - specific size align before processing payload + * + */ +ulong board_spl_fit_size_align(ulong size); + +/** * spl_perform_fixups() - arch/board-specific callback before processing * the boot-payload */ diff --git a/include/vxworks.h b/include/vxworks.h index 60c0efaf6e..1a29509460 100644 --- a/include/vxworks.h +++ b/include/vxworks.h @@ -83,6 +83,5 @@ struct efi_gop_info { int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); void boot_prep_vxworks(bootm_headers_t *images); void boot_jump_vxworks(bootm_headers_t *images); -void do_bootvx_fdt(bootm_headers_t *images); #endif diff --git a/tools/Makefile b/tools/Makefile index 2c4d91f199..081383d7a7 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -94,6 +94,7 @@ dumpimage-mkimage-objs := aisimage.o \ imagetool.o \ imximage.o \ imx8image.o \ + imx8mimage.o \ kwbimage.o \ lib/md5.o \ lpc32xximage.o \ diff --git a/tools/imagetool.h b/tools/imagetool.h index 3fcfb4468d..71471420f9 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -233,6 +233,7 @@ time_t imagetool_get_source_date( void pbl_load_uboot(int fd, struct image_tool_params *mparams); int zynqmpbif_copy_image(int fd, struct image_tool_params *mparams); int imx8image_copy_image(int fd, struct image_tool_params *mparams); +int imx8mimage_copy_image(int fd, struct image_tool_params *mparams); #define ___cat(a, b) a ## b #define __cat(a, b) ___cat(a, b) diff --git a/tools/imx8m_image.sh b/tools/imx8m_image.sh new file mode 100755 index 0000000000..6346fb64d8 --- /dev/null +++ b/tools/imx8m_image.sh @@ -0,0 +1,43 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +# +# script to check whether the file exists in imximage.cfg for i.MX8M +# + +file=$1 + +post_process=$2 + +blobs=`awk '/^SIGNED_HDMI/ {print $2} /^LOADER/ {print $2} /^SECOND_LOADER/ {print $2} /^DDR_FW/ {print $2}' $file` +for f in $blobs; do + tmp=$srctree/$f + + if [ $f == "spl/u-boot-spl-ddr.bin" ] || [ $f == "u-boot.itb" ]; then + continue + fi + + if [ -f $f ]; then + continue + fi + + if [ ! -f $tmp ]; then + echo "WARNING '$tmp' not found, resulting binary is not-functional" >&2 + exit 1 + fi + + sed -in "s;$f;$tmp;" $file +done + +if [ $post_process == 1 ]; then + if [ -f $srctree/lpddr4_pmu_train_1d_imem.bin ]; then + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin + objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin + cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin + cat lpddr4_pmu_train_2d_imem_pad.bin $srctree/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin + cat spl/u-boot-spl.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin + rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin + fi +fi + +exit 0 diff --git a/tools/imx8mimage.c b/tools/imx8mimage.c new file mode 100644 index 0000000000..50a256cbac --- /dev/null +++ b/tools/imx8mimage.c @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * + * Peng Fan <peng.fan@nxp.com> + */ + + +#include "imagetool.h" +#include <image.h> +#include "imximage.h" +#include "compiler.h" + +static uint32_t ap_start_addr, sld_start_addr, sld_src_off; +static char *ap_img, *sld_img, *signed_hdmi; +static imx_header_v3_t imx_header[2]; /* At most there are 3 IVT headers */ +static uint32_t rom_image_offset; +static uint32_t sector_size = 0x200; +static uint32_t image_off; +static uint32_t sld_header_off; +static uint32_t ivt_offset; +static uint32_t using_fit; + +#define CSF_SIZE 0x2000 +#define HDMI_IVT_ID 0 +#define IMAGE_IVT_ID 1 + +#define HDMI_FW_SIZE 0x17000 /* Use Last 0x1000 for IVT and CSF */ +#define ALIGN_SIZE 0x1000 +#define ALIGN(x,a) __ALIGN_MASK((x), (__typeof__(x))(a) - 1, a) +#define __ALIGN_MASK(x,mask,mask2) (((x) + (mask)) / (mask2) * (mask2)) + +static uint32_t get_cfg_value(char *token, char *name, int linenr) +{ + char *endptr; + uint32_t value; + + errno = 0; + value = strtoul(token, &endptr, 16); + if (errno || token == endptr) { + fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", + name, linenr, token); + exit(EXIT_FAILURE); + } + return value; +} + +int imx8mimage_check_params(struct image_tool_params *params) +{ + return 0; +} + +static void imx8mimage_set_header(void *ptr, struct stat *sbuf, int ifd, + struct image_tool_params *params) +{ +} + +static void imx8mimage_print_header(const void *ptr) +{ +} + +static int imx8mimage_check_image_types(uint8_t type) +{ + return (type == IH_TYPE_IMX8MIMAGE) ? EXIT_SUCCESS : EXIT_FAILURE; +} + +static table_entry_t imx8mimage_cmds[] = { + {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, + {CMD_FIT, "FIT", "fit image", }, + {CMD_SIGNED_HDMI, "SIGNED_HDMI", "signed hdmi image", }, + {CMD_LOADER, "LOADER", "loader image", }, + {CMD_SECOND_LOADER, "SECOND_LOADER", "2nd loader image", }, + {CMD_DDR_FW, "DDR_FW", "ddr firmware", }, + {-1, "", "", }, +}; + +static table_entry_t imx8mimage_ivt_offset[] = { + {0x400, "sd", "sd/emmc",}, + {0x400, "emmc_fastboot", "emmc fastboot",}, + {0x1000, "fspi", "flexspi", }, + {-1, "", "Invalid", }, +}; + +static void parse_cfg_cmd(int32_t cmd, char *token, char *name, int lineno) +{ + switch (cmd) { + case CMD_BOOT_FROM: + ivt_offset = get_table_entry_id(imx8mimage_ivt_offset, + "imx8mimage ivt offset", + token); + if (!strncmp(token, "sd", 2)) + rom_image_offset = 0x8000; + break; + case CMD_LOADER: + ap_img = token; + break; + case CMD_SECOND_LOADER: + sld_img = token; + break; + case CMD_SIGNED_HDMI: + signed_hdmi = token; + case CMD_FIT: + using_fit = 1; + break; + case CMD_DDR_FW: + /* Do nothing */ + break; + } +} + +static void parse_cfg_fld(int32_t *cmd, char *token, + char *name, int lineno, int fld) +{ + switch (fld) { + case CFG_COMMAND: + *cmd = get_table_entry_id(imx8mimage_cmds, + "imx8mimage commands", token); + if (*cmd < 0) { + fprintf(stderr, "Error: %s[%d] - Invalid command" "(%s)\n", + name, lineno, token); + exit(EXIT_FAILURE); + } + break; + case CFG_REG_SIZE: + parse_cfg_cmd(*cmd, token, name, lineno); + break; + case CFG_REG_ADDRESS: + switch (*cmd) { + case CMD_LOADER: + ap_start_addr = get_cfg_value(token, name, lineno); + break; + case CMD_SECOND_LOADER: + sld_start_addr = get_cfg_value(token, name, lineno); + break; + } + break; + case CFG_REG_VALUE: + switch (*cmd) { + case CMD_SECOND_LOADER: + sld_src_off = get_cfg_value(token, name, lineno); + break; + } + default: + break; + } +} + +static uint32_t parse_cfg_file(char *name) +{ + FILE *fd = NULL; + char *line = NULL; + char *token, *saveptr1, *saveptr2; + int lineno = 0; + int fld; + size_t len; + int32_t cmd; + + fd = fopen(name, "r"); + if (fd == 0) { + fprintf(stderr, "Error: %s - Can't open cfg file\n", name); + exit(EXIT_FAILURE); + } + + /* + * Very simple parsing, line starting with # are comments + * and are dropped + */ + while ((getline(&line, &len, fd)) > 0) { + lineno++; + + token = strtok_r(line, "\r\n", &saveptr1); + if (!token) + continue; + + /* Check inside the single line */ + for (fld = CFG_COMMAND, cmd = CFG_INVALID, + line = token; ; line = NULL, fld++) { + token = strtok_r(line, " \t", &saveptr2); + if (!token) + break; + + /* Drop all text starting with '#' as comments */ + if (token[0] == '#') + break; + + parse_cfg_fld(&cmd, token, name, lineno, fld); + } + } + + return 0; +} + +static void fill_zero(int ifd, int size, int offset) +{ + int fill_size; + uint8_t zeros[4096]; + int ret; + + memset(zeros, 0, sizeof(zeros)); + + ret = lseek(ifd, offset, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "%s seek: %s\n", __func__, strerror(errno)); + exit(EXIT_FAILURE); + } + + while (size) { + if (size > 4096) + fill_size = 4096; + else + fill_size = size; + + if (write(ifd, (char *)&zeros, fill_size) != fill_size) { + fprintf(stderr, "Write error: %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + + size -= fill_size; + }; +} + +static void copy_file(int ifd, const char *datafile, int pad, int offset, + int datafile_offset) +{ + int dfd; + struct stat sbuf; + unsigned char *ptr; + int tail; + int zero = 0; + uint8_t zeros[4096]; + int size, ret; + + memset(zeros, 0, sizeof(zeros)); + + dfd = open(datafile, O_RDONLY | O_BINARY); + if (dfd < 0) { + fprintf(stderr, "Can't open %s: %s\n", + datafile, strerror(errno)); + exit(EXIT_FAILURE); + } + + if (fstat(dfd, &sbuf) < 0) { + fprintf(stderr, "Can't stat %s: %s\n", + datafile, strerror(errno)); + exit(EXIT_FAILURE); + } + + ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0); + if (ptr == MAP_FAILED) { + fprintf(stderr, "Can't read %s: %s\n", + datafile, strerror(errno)); + exit(EXIT_FAILURE); + } + + size = sbuf.st_size - datafile_offset; + ret = lseek(ifd, offset, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "lseek ifd fail\n"); + exit(EXIT_FAILURE); + } + + if (write(ifd, ptr + datafile_offset, size) != size) { + fprintf(stderr, "Write error %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + + tail = size % 4; + pad = pad - size; + if (pad == 1 && tail != 0) { + if (write(ifd, (char *)&zero, 4 - tail) != 4 - tail) { + fprintf(stderr, "Write error on %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + } else if (pad > 1) { + while (pad > 0) { + int todo = sizeof(zeros); + + if (todo > pad) + todo = pad; + if (write(ifd, (char *)&zeros, todo) != todo) { + fprintf(stderr, "Write error: %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + pad -= todo; + } + } + + munmap((void *)ptr, sbuf.st_size); + close(dfd); +} + +/* Return this IVT offset in the final output file */ +static int generate_ivt_for_fit(int fd, int fit_offset, uint32_t ep, + uint32_t *fit_load_addr) +{ + image_header_t image_header; + int ret; + + uint32_t fit_size, load_addr; + int align_len = 64 - 1; /* 64 is cacheline size */ + + ret = lseek(fd, fit_offset, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "lseek fd fail for fit\n"); + exit(EXIT_FAILURE); + } + + if (read(fd, (char *)&image_header, sizeof(image_header_t)) != + sizeof(image_header_t)) { + fprintf(stderr, "generate_ivt_for_fit read failed: %s\n", + strerror(errno)); + exit(EXIT_FAILURE); + } + + if (be32_to_cpu(image_header.ih_magic) != FDT_MAGIC) { + fprintf(stderr, "%s error: not a FIT file\n", __func__); + exit(EXIT_FAILURE); + } + + fit_size = fdt_totalsize(&image_header); + fit_size = (fit_size + 3) & ~3; + + fit_size = ALIGN(fit_size, ALIGN_SIZE); + + ret = lseek(fd, fit_offset + fit_size, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "lseek fd fail for fit\n"); + exit(EXIT_FAILURE); + } + + /* + * ep is the u-boot entry. SPL loads the FIT before the u-boot + * address. 0x2000 is for CSF_SIZE + */ + load_addr = (ep - (fit_size + CSF_SIZE) - 512 - align_len) & + ~align_len; + + flash_header_v2_t ivt_header = { { 0xd1, 0x2000, 0x40 }, + load_addr, 0, 0, 0, + (load_addr + fit_size), + (load_addr + fit_size + 0x20), + 0 }; + + if (write(fd, &ivt_header, sizeof(flash_header_v2_t)) != + sizeof(flash_header_v2_t)) { + fprintf(stderr, "IVT writing error on fit image\n"); + exit(EXIT_FAILURE); + } + + *fit_load_addr = load_addr; + + return fit_offset + fit_size; +} + +static void dump_header_v2(imx_header_v3_t *imx_header, int index) +{ + const char *ivt_name[2] = {"HDMI FW", "LOADER IMAGE"}; + + fprintf(stdout, "========= IVT HEADER [%s] =========\n", + ivt_name[index]); + fprintf(stdout, "header.tag: \t\t0x%x\n", + imx_header[index].fhdr.header.tag); + fprintf(stdout, "header.length: \t\t0x%x\n", + imx_header[index].fhdr.header.length); + fprintf(stdout, "header.version: \t0x%x\n", + imx_header[index].fhdr.header.version); + fprintf(stdout, "entry: \t\t\t0x%x\n", + imx_header[index].fhdr.entry); + fprintf(stdout, "reserved1: \t\t0x%x\n", + imx_header[index].fhdr.reserved1); + fprintf(stdout, "dcd_ptr: \t\t0x%x\n", + imx_header[index].fhdr.dcd_ptr); + fprintf(stdout, "boot_data_ptr: \t\t0x%x\n", + imx_header[index].fhdr.boot_data_ptr); + fprintf(stdout, "self: \t\t\t0x%x\n", + imx_header[index].fhdr.self); + fprintf(stdout, "csf: \t\t\t0x%x\n", + imx_header[index].fhdr.csf); + fprintf(stdout, "reserved2: \t\t0x%x\n", + imx_header[index].fhdr.reserved2); + + fprintf(stdout, "boot_data.start: \t0x%x\n", + imx_header[index].boot_data.start); + fprintf(stdout, "boot_data.size: \t0x%x\n", + imx_header[index].boot_data.size); + fprintf(stdout, "boot_data.plugin: \t0x%x\n", + imx_header[index].boot_data.plugin); +} + +void build_image(int ofd) +{ + int file_off, header_hdmi_off = 0, header_image_off; + int hdmi_fd, ap_fd, sld_fd; + uint32_t sld_load_addr = 0; + uint32_t csf_off, sld_csf_off = 0; + int ret; + struct stat sbuf; + + if (!ap_img) { + fprintf(stderr, "No LOADER image specificed\n"); + exit(EXIT_FAILURE); + } + + file_off = 0; + + if (signed_hdmi) { + header_hdmi_off = file_off + ivt_offset; + + hdmi_fd = open(signed_hdmi, O_RDONLY | O_BINARY); + if (hdmi_fd < 0) { + fprintf(stderr, "%s: Can't open: %s\n", + signed_hdmi, strerror(errno)); + exit(EXIT_FAILURE); + } + + if (fstat(hdmi_fd, &sbuf) < 0) { + fprintf(stderr, "%s: Can't stat: %s\n", + signed_hdmi, strerror(errno)); + exit(EXIT_FAILURE); + } + close(hdmi_fd); + + /* + * Aligned to 104KB = 92KB FW image + 0x8000 + * (IVT and alignment) + 0x4000 (second IVT + CSF) + */ + file_off += ALIGN(sbuf.st_size, + HDMI_FW_SIZE + 0x2000 + 0x1000); + } + + header_image_off = file_off + ivt_offset; + + ap_fd = open(ap_img, O_RDONLY | O_BINARY); + if (ap_fd < 0) { + fprintf(stderr, "%s: Can't open: %s\n", + ap_img, strerror(errno)); + exit(EXIT_FAILURE); + } + if (fstat(ap_fd, &sbuf) < 0) { + fprintf(stderr, "%s: Can't stat: %s\n", + ap_img, strerror(errno)); + exit(EXIT_FAILURE); + } + close(ap_fd); + + imx_header[IMAGE_IVT_ID].fhdr.header.tag = IVT_HEADER_TAG; /* 0xD1 */ + imx_header[IMAGE_IVT_ID].fhdr.header.length = + cpu_to_be16(sizeof(flash_header_v2_t)); + imx_header[IMAGE_IVT_ID].fhdr.header.version = IVT_VERSION_V3; /* 0x41 */ + imx_header[IMAGE_IVT_ID].fhdr.entry = ap_start_addr; + imx_header[IMAGE_IVT_ID].fhdr.self = ap_start_addr - + sizeof(imx_header_v3_t); + imx_header[IMAGE_IVT_ID].fhdr.dcd_ptr = 0; + imx_header[IMAGE_IVT_ID].fhdr.boot_data_ptr = + imx_header[IMAGE_IVT_ID].fhdr.self + + offsetof(imx_header_v3_t, boot_data); + imx_header[IMAGE_IVT_ID].boot_data.start = + imx_header[IMAGE_IVT_ID].fhdr.self - ivt_offset; + imx_header[IMAGE_IVT_ID].boot_data.size = + ALIGN(sbuf.st_size + sizeof(imx_header_v3_t) + ivt_offset, + sector_size); + + image_off = header_image_off + sizeof(imx_header_v3_t); + file_off += imx_header[IMAGE_IVT_ID].boot_data.size; + + imx_header[IMAGE_IVT_ID].boot_data.plugin = 0; + imx_header[IMAGE_IVT_ID].fhdr.csf = + imx_header[IMAGE_IVT_ID].boot_data.start + + imx_header[IMAGE_IVT_ID].boot_data.size; + + imx_header[IMAGE_IVT_ID].boot_data.size += CSF_SIZE; /* 8K region dummy CSF */ + + csf_off = file_off; + file_off += CSF_SIZE; + + /* Second boot loader image */ + if (sld_img) { + if (!using_fit) { + fprintf(stderr, "Not support no fit\n"); + exit(EXIT_FAILURE); + } else { + sld_header_off = sld_src_off - rom_image_offset; + /* + * Record the second bootloader relative offset in + * image's IVT reserved1 + */ + imx_header[IMAGE_IVT_ID].fhdr.reserved1 = + sld_header_off - header_image_off; + sld_fd = open(sld_img, O_RDONLY | O_BINARY); + if (sld_fd < 0) { + fprintf(stderr, "%s: Can't open: %s\n", + sld_img, strerror(errno)); + exit(EXIT_FAILURE); + } + + if (fstat(sld_fd, &sbuf) < 0) { + fprintf(stderr, "%s: Can't stat: %s\n", + sld_img, strerror(errno)); + exit(EXIT_FAILURE); + } + + close(sld_fd); + + file_off = sld_header_off; + file_off += sbuf.st_size + sizeof(image_header_t); + } + } + + if (signed_hdmi) { + header_hdmi_off -= ivt_offset; + ret = lseek(ofd, header_hdmi_off, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "lseek ofd fail for hdmi\n"); + exit(EXIT_FAILURE); + } + + /* The signed HDMI FW has 0x400 IVT offset, need remove it */ + copy_file(ofd, signed_hdmi, 0, header_hdmi_off, 0x400); + } + + /* Main Image */ + header_image_off -= ivt_offset; + image_off -= ivt_offset; + ret = lseek(ofd, header_image_off, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "lseek ofd fail\n"); + exit(EXIT_FAILURE); + } + + /* Write image header */ + if (write(ofd, &imx_header[IMAGE_IVT_ID], sizeof(imx_header_v3_t)) != + sizeof(imx_header_v3_t)) { + fprintf(stderr, "error writing image hdr\n"); + exit(1); + } + + copy_file(ofd, ap_img, 0, image_off, 0); + + csf_off -= ivt_offset; + fill_zero(ofd, CSF_SIZE, csf_off); + + if (sld_img) { + sld_header_off -= ivt_offset; + ret = lseek(ofd, sld_header_off, SEEK_SET); + if (ret < 0) { + fprintf(stderr, "lseek ofd fail for sld_img\n"); + exit(EXIT_FAILURE); + } + + /* Write image header */ + if (!using_fit) { + /* TODO */ + } else { + copy_file(ofd, sld_img, 0, sld_header_off, 0); + sld_csf_off = + generate_ivt_for_fit(ofd, sld_header_off, + sld_start_addr, + &sld_load_addr) + 0x20; + } + } + + if (!signed_hdmi) + dump_header_v2(imx_header, 0); + dump_header_v2(imx_header, 1); + + fprintf(stdout, "========= OFFSET dump ========="); + if (signed_hdmi) { + fprintf(stdout, "\nSIGNED HDMI FW:\n"); + fprintf(stdout, " header_hdmi_off \t0x%x\n", + header_hdmi_off); + } + + fprintf(stdout, "\nLoader IMAGE:\n"); + fprintf(stdout, " header_image_off \t0x%x\n image_off \t\t0x%x\n csf_off \t\t0x%x\n", + header_image_off, image_off, csf_off); + fprintf(stdout, " spl hab block: \t0x%x 0x%x 0x%x\n", + imx_header[IMAGE_IVT_ID].fhdr.self, header_image_off, + csf_off - header_image_off); + + fprintf(stdout, "\nSecond Loader IMAGE:\n"); + fprintf(stdout, " sld_header_off \t0x%x\n", + sld_header_off); + fprintf(stdout, " sld_csf_off \t\t0x%x\n", + sld_csf_off); + fprintf(stdout, " sld hab block: \t0x%x 0x%x 0x%x\n", + sld_load_addr, sld_header_off, sld_csf_off - sld_header_off); +} + +int imx8mimage_copy_image(int outfd, struct image_tool_params *mparams) +{ + /* + * SECO FW is a container image, this is to calculate the + * 2nd container offset. + */ + fprintf(stdout, "parsing %s\n", mparams->imagename); + parse_cfg_file(mparams->imagename); + + build_image(outfd); + + return 0; +} + +/* + * imx8mimage parameters + */ +U_BOOT_IMAGE_TYPE( + imx8mimage, + "NXP i.MX8M Boot Image support", + 0, + NULL, + imx8mimage_check_params, + NULL, + imx8mimage_print_header, + imx8mimage_set_header, + NULL, + imx8mimage_check_image_types, + NULL, + NULL +); diff --git a/tools/imx_cntr_image.sh b/tools/imx_cntr_image.sh index 4c629e8694..972b95ccbe 100755 --- a/tools/imx_cntr_image.sh +++ b/tools/imx_cntr_image.sh @@ -10,7 +10,7 @@ file=$1 blobs=`awk '/^APPEND/ {print $2} /^IMAGE/ || /^DATA/ {print $3}' $file` for f in $blobs; do tmp=$srctree/$f - if [ $f == "u-boot-dtb.bin" ]; then + if [ $f = "u-boot-dtb.bin" ]; then continue fi diff --git a/tools/mkimage.c b/tools/mkimage.c index 38805f0c92..ea5ed542ab 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -530,6 +530,13 @@ int main(int argc, char **argv) ret = imx8image_copy_image(ifd, ¶ms); if (ret) return ret; + } else if (params.type == IH_TYPE_IMX8MIMAGE) { + /* i.MX8M has special Image format */ + int ret; + + ret = imx8mimage_copy_image(ifd, ¶ms); + if (ret) + return ret; } else { copy_file(ifd, params.datafile, pad_len); } |