diff options
646 files changed, 20311 insertions, 9151 deletions
diff --git a/.gitignore b/.gitignore index d1282e790e..255d89f893 100644 --- a/.gitignore +++ b/.gitignore @@ -16,6 +16,7 @@ *.patch *.bin *.cfgtmp +*.dts.tmp # Build tree /build-* diff --git a/Licenses/README b/Licenses/README index b1a59cc22f..41961256a6 100644 --- a/Licenses/README +++ b/Licenses/README @@ -43,10 +43,14 @@ at [2]. [1] http://spdx.org/ [2] http://spdx.org/licenses/ -Full name SPDX Identifier OSI Approved File name URI +Full name SPDX Identifier OSI Approved File name URI ======================================================================================================================================= -GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt -GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt -GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt -GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt -eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html +GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt +GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt +GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt +GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt +eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html +BSD 2-Clause License BSD-2-Clause Y bsd-2-clause.txt http://spdx.org/licenses/BSD-2-Clause +BSD 3-clause "New" or "Revised" License BSD-3-Clause Y bsd-3-clause.txt http://spdx.org/licenses/BSD-3-Clause#licenseText +IBM PIBS (PowerPC Initialization and ibm-pibs ibm-pibs.txt + Boot Software) license diff --git a/Licenses/bsd-2-clause.txt b/Licenses/bsd-2-clause.txt new file mode 100644 index 0000000000..af697645fe --- /dev/null +++ b/Licenses/bsd-2-clause.txt @@ -0,0 +1,25 @@ +Redistribution and use in source and binary forms, with or +without modification, are permitted provided that the following +conditions are met: + +1. Redistributions of source code must retain the above + copyright notice, this list of conditions and the following + disclaimer. +2. Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following + disclaimer in the documentation and/or other materials + provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/Licenses/bsd-3-clause.txt b/Licenses/bsd-3-clause.txt new file mode 100644 index 0000000000..aac5e2a803 --- /dev/null +++ b/Licenses/bsd-3-clause.txt @@ -0,0 +1,24 @@ +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: +1. Redistributions of source code must retain the above copyright + notice, this list of conditions, and the following disclaimer, + without modification. +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. +3. The names of the above-listed copyright holders may not be used + to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/Licenses/ibm-pibs.txt b/Licenses/ibm-pibs.txt new file mode 100644 index 0000000000..4cd7523647 --- /dev/null +++ b/Licenses/ibm-pibs.txt @@ -0,0 +1,17 @@ +This source code has been made available to you by IBM on an AS-IS +basis. Anyone receiving this source is licensed under IBM +copyrights to use it in any way he or she deems fit, including +copying it, modifying it, compiling it, and redistributing it either +with or without modifications. No license under IBM patents or +patent applications is to be implied by the copyright license. + +Any user of this software should understand that IBM cannot provide +technical support for this software and will not be responsible for +any consequences resulting from the use of this software. + +Any person who transfers this source code or any derivative work +must include the IBM copyright notice, this paragraph, and the +preceding two paragraphs in the transferred software. + +COPYRIGHT I B M CORPORATION 1995 +LICENSED MATERIAL - PROGRAM PROPERTY OF I B M diff --git a/MAINTAINERS b/MAINTAINERS index 9700ec9e80..86a5ce402e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -184,7 +184,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com> APC405 PPC405GP AR405 PPC405GP ASH405 PPC405EP - CANBT PPC405CR CPCI2DP PPC405GP CPCI405 PPC405GP CPCI4052 PPC405GP @@ -477,6 +476,10 @@ Ira W. Snyder <iws@ovro.caltech.edu> P2020COME P2020 +York Sun <yorksun@freescale.com> + + T4240EMU T4240 + Timur Tabi <timur@freescale.com> MPC8349E-mITX MPC8349 @@ -544,6 +547,10 @@ Detlev Zundel <dzu@denx.de> inka4x0 MPC5200 +Po Liu <po.liu@freescale.com> + + C29XPCIE C29X + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -1091,6 +1098,11 @@ Sergey Yanovich <ynvich@gmail.com> lp8x4x xscale/pxa +Roger Meier <r.meier@siemens.com> + dxr2 ARM ARMV7 (AM335x SoC) + pxm2 ARM ARMV7 (AM335x SoC) + rut ARM ARMV7 (AM335x SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -1367,7 +1379,7 @@ Dimitar Penev <dpn@switchfin.org> # Board CPU # ######################################################################### -Macpaul Lin <macpaul@andestech.com> +Andes <uboot@andestech.com> ADP-AG101 N1213 (AG101 SoC) ADP-AG101P N1213 (AG101P XC5 FPGA) @@ -6,9 +6,9 @@ # VERSION = 2013 -PATCHLEVEL = 07 +PATCHLEVEL = 10 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -102,10 +102,11 @@ endif # ifneq ($(BUILD_DIR),) OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) SPLTREE := $(OBJTREE)/spl +TPLTREE := $(OBJTREE)/tpl SRCTREE := $(CURDIR) TOPDIR := $(SRCTREE) LNDIR := $(OBJTREE) -export TOPDIR SRCTREE OBJTREE SPLTREE +export TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE MKCONFIG := $(SRCTREE)/mkconfig export MKCONFIG @@ -397,6 +398,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin +ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin ifneq ($(CONFIG_SPL_TARGET),) ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) @@ -413,7 +415,7 @@ endif all: $(ALL-y) $(SUBDIR_EXAMPLES) -$(obj)u-boot.dtb: $(obj)u-boot +$(obj)u-boot.dtb: checkdtc $(obj)u-boot $(MAKE) -C dts binary mv $(obj)dts/dt.dtb $@ @@ -475,13 +477,25 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ +# $@ is output, $(1) and $(2) are inputs, $(3) is padded intermediate, +# $(4) is pad-to +SPL_PAD_APPEND = \ + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(4) -I binary -O binary \ + $(1) $(obj)$(3); \ + cat $(obj)$(3) $(2) > $@; \ + rm $(obj)$(3) +ifdef CONFIG_TPL +SPL_PAYLOAD := $(obj)tpl/u-boot-with-tpl.bin +else +SPL_PAYLOAD := $(obj)u-boot.bin +endif -$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ - -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ - rm $(obj)spl/u-boot-spl-pad.bin +$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(SPL_PAYLOAD) + $(call SPL_PAD_APPEND,$<,$(SPL_PAYLOAD),spl/u-boot-spl-pad.bin,$(CONFIG_SPL_PAD_TO)) + +$(obj)tpl/u-boot-with-tpl.bin: $(obj)tpl/u-boot-tpl.bin $(obj)u-boot.bin + $(call SPL_PAD_APPEND,$<,$(obj)u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO)) $(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \ @@ -607,12 +621,17 @@ $(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend $(MAKE) -C spl all +$(obj)tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend + $(MAKE) -C spl all CONFIG_TPL_BUILD=y + updater: $(MAKE) -C tools/updater all # Explicitly make _depend in subdirs containing multiple targets to prevent # parallel sub-makes creating .depend files simultaneously. depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(obj)include/autoconf.mk \ $(obj)include/generated/generic-asm-offsets.h \ $(obj)include/generated/asm-offsets.h @@ -667,6 +686,12 @@ checkgcc4: false; \ fi +checkdtc: + @if test $(call dtc-version) -lt 0104; then \ + echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ + false; \ + fi + # # Auto-generate the autoconf.mk file (which is included by all makefiles) # @@ -688,12 +713,34 @@ $(obj)include/autoconf.mk: $(obj)include/config.h sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ mv $@.tmp $@ +# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL) +$(obj)include/tpl-autoconf.mk: $(obj)include/config.h + @$(XECHO) Generating $@ ; \ + set -e ; \ + : Extract the config macros ; \ + $(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD -DCONFIG_SPL_BUILD\ + -DDO_DEPS_ONLY -dM include/common.h | \ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ + +$(obj)include/spl-autoconf.mk: $(obj)include/config.h + @$(XECHO) Generating $@ ; \ + set -e ; \ + : Extract the config macros ; \ + $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h | \ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ + $(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(obj)lib/asm-offsets.s @$(XECHO) Generating $@ tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@ $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(src)lib/asm-offsets.c @mkdir -p $(obj)lib $(CC) -DDO_DEPS_ONLY \ @@ -701,11 +748,15 @@ $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ -o $@ $(src)lib/asm-offsets.c -c -S $(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s @$(XECHO) Generating $@ tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@ -$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep +$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk @mkdir -p $(obj)$(CPUDIR)/$(SOC) if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \ $(CC) -DDO_DEPS_ONLY \ @@ -777,7 +828,9 @@ include/license.h: tools/bin2header COPYING unconfig: @rm -f $(obj)include/config.h $(obj)include/config.mk \ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ - $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep + $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk %_config:: unconfig @$(MKCONFIG) -A $(@:_config=) @@ -863,6 +916,8 @@ clobber: tidy @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} @rm -f $(obj)spl/u-boot-spl.lds + @rm -f $(obj)tpl/{u-boot-tpl,u-boot-tpl.bin,u-boot-tpl.map} + @rm -f $(obj)tpl/u-boot-spl.lds @rm -f $(obj)MLO MLO.byteswap @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes @@ -406,13 +406,25 @@ The following options need to be configured: This is the value to write into CCSR offset 0x18600 according to the A004510 workaround. + CONFIG_SYS_FSL_DSP_DDR_ADDR + This value denotes start offset of DDR memory which is + connected exclusively to the DSP cores. + CONFIG_SYS_FSL_DSP_M2_RAM_ADDR This value denotes start offset of M2 memory which is directly connected to the DSP core. + CONFIG_SYS_FSL_DSP_M3_RAM_ADDR + This value denotes start offset of M3 memory which is directly + connected to the DSP core. + CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. + CONFIG_SYS_FSL_DDR_EMU + Specify emulator support for DDR. Some DDR features such as + deskew training are not available. + - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN @@ -3078,6 +3090,14 @@ FIT uImage format: Support for NAND boot using simple NAND drivers that expose the cmd_ctrl() interface. + CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT + Set for the SPL on PPC mpc8xxx targets, support for + arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary. + + CONFIG_SPL_COMMON_INIT_DDR + Set for common ddr init with serial presence detect in + SPL binary. + CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, @@ -3147,6 +3167,17 @@ FIT uImage format: option to re-enable it. This will affect the output of the bootm command when booting a FIT image. +- TPL framework + CONFIG_TPL + Enable building of TPL globally. + + CONFIG_TPL_PAD_TO + Image offset to which the TPL should be padded before appending + the TPL payload. By default, this is defined as + CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. + CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL + payload without any padding, or >= CONFIG_SPL_MAX_SIZE. + Modem Support: -------------- @@ -4184,6 +4215,11 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_TPL_BUILD + Modifies the behaviour of start.S when compiling a loader + that is executed after the SPL and before the actual U-Boot. + It is loaded by the SPL. + - CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the @@ -4630,6 +4666,12 @@ List of environment variables (most likely not complete): npe_ucode - set load address for the NPE microcode + silent_linux - If set then linux will be told to boot silently, by + changing the console to be empty. If "yes" it will be + made silent. If "no" it will not be made silent. If + unset, then it will be made silent if the U-Boot console + is silent. + tftpsrcport - If this is set, the value is used for TFTP's UDP source port. diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg new file mode 100644 index 0000000000..811876736c --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg @@ -0,0 +1,6 @@ +SECTION 0x0 BOOTABLE + TAG LAST + LOAD 0x0 spl/u-boot-spl.bin + CALL 0x14 0x0 + LOAD 0x40000100 u-boot.bin + CALL 0x40000100 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg new file mode 100644 index 0000000000..ea772f0c86 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg @@ -0,0 +1,8 @@ +SECTION 0x0 BOOTABLE + TAG LAST + LOAD 0x0 spl/u-boot-spl.bin + LOAD IVT 0x8000 0x14 + CALL HAB 0x8000 0x0 + LOAD 0x40000100 u-boot.bin + LOAD IVT 0x8000 0x40000100 + CALL HAB 0x8000 0x0 diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index e3b6cd95f9..f357959059 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -36,7 +36,7 @@ static void mxs_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } -static void mxs_power_clear_auto_restart(void) +static void mxs_power_set_auto_restart(void) { struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; @@ -49,10 +49,7 @@ static void mxs_power_clear_auto_restart(void) while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE) ; - /* - * Due to the hardware design bug of mx28 EVK-A - * we need to set the AUTO_RESTART bit. - */ + /* Do nothing if flag already set */ if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART) return; @@ -911,7 +908,7 @@ void mxs_power_init(void) mxs_ungate_power(); mxs_power_clock2xtal(); - mxs_power_clear_auto_restart(); + mxs_power_set_auto_restart(); mxs_power_set_linreg(); mxs_power_setup_5v_detect(); diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c index 4a3fca56a1..e55e1c6602 100644 --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -144,6 +144,30 @@ void at91_macb_hw_init(void) /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_EMAC); } + +void at91_gmac_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ + + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ + + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_GMAC); +} #endif #ifdef CONFIG_LCD diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index fbbb365cb6..6bef254456 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -85,7 +85,7 @@ void set_usboh3_clk(void) MXC_CCM_CSCDR1_USBOH3_CLK_PODF(1)); } -void enable_usboh3_clk(unsigned char enable) +void enable_usboh3_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -122,7 +122,7 @@ void set_usb_phy_clk(void) } #if defined(CONFIG_MX51) -void enable_usb_phy1_clk(unsigned char enable) +void enable_usb_phy1_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -131,12 +131,12 @@ void enable_usb_phy1_clk(unsigned char enable) MXC_CCM_CCGR2_USB_PHY(cg)); } -void enable_usb_phy2_clk(unsigned char enable) +void enable_usb_phy2_clk(bool enable) { /* i.MX51 has a single USB PHY clock, so do nothing here. */ } #elif defined(CONFIG_MX53) -void enable_usb_phy1_clk(unsigned char enable) +void enable_usb_phy1_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -145,7 +145,7 @@ void enable_usb_phy1_clk(unsigned char enable) MXC_CCM_CCGR4_USB_PHY1(cg)); } -void enable_usb_phy2_clk(unsigned char enable) +void enable_usb_phy2_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index c5e98582d0..6d736174db 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -11,10 +11,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = soc.o clock.o +COBJS-y = soc.o clock.o +COBJS-$(CONFIG_SECURE_BOOT) += hab.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) all: $(obj).depend $(LIB) diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c new file mode 100644 index 0000000000..5187775365 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/hab.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hab.h> + +/* -------- start of HAB API updates ------------*/ +#define hab_rvt_report_event ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) +#define hab_rvt_report_status ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) +#define hab_rvt_authenticate_image \ + ((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) +#define hab_rvt_entry ((hab_rvt_entry_t *)HAB_RVT_ENTRY) +#define hab_rvt_exit ((hab_rvt_exit_t *)HAB_RVT_EXIT) +#define hab_rvt_clock_init HAB_RVT_CLOCK_INIT + +bool is_hab_enabled(void) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[0]; + struct fuse_bank0_regs *fuse = + (struct fuse_bank0_regs *)bank->fuse_regs; + uint32_t reg = readl(&fuse->cfg5); + + return (reg & 0x2) == 0x2; +} + +void display_event(uint8_t *event_data, size_t bytes) +{ + uint32_t i; + + if (!(event_data && bytes > 0)) + return; + + for (i = 0; i < bytes; i++) { + if (i == 0) + printf("\t0x%02x", event_data[i]); + else if ((i % 8) == 0) + printf("\n\t0x%02x", event_data[i]); + else + printf(" 0x%02x", event_data[i]); + } +} + +int get_hab_status(void) +{ + uint32_t index = 0; /* Loop index */ + uint8_t event_data[128]; /* Event data buffer */ + size_t bytes = sizeof(event_data); /* Event size in bytes */ + enum hab_config config = 0; + enum hab_state state = 0; + + if (is_hab_enabled()) + puts("\nSecure boot enabled\n"); + else + puts("\nSecure boot disabled\n"); + + /* Check HAB status */ + if (hab_rvt_report_status(&config, &state) != HAB_SUCCESS) { + printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n", + config, state); + + /* Display HAB Error events */ + while (hab_rvt_report_event(HAB_FAILURE, index, event_data, + &bytes) == HAB_SUCCESS) { + puts("\n"); + printf("--------- HAB Event %d -----------------\n", + index + 1); + puts("event data:\n"); + display_event(event_data, bytes); + puts("\n"); + bytes = sizeof(event_data); + index++; + } + } + /* Display message if no HAB events are found */ + else { + printf("\nHAB Configuration: 0x%02x, HAB State: 0x%02x\n", + config, state); + puts("No HAB Events Found!\n\n"); + } + return 0; +} + +int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if ((argc != 1)) { + cmd_usage(cmdtp); + return 1; + } + + get_hab_status(); + + return 0; +} + +U_BOOT_CMD( + hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status, + "display HAB status", + "" + ); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 8150bffb8c..a3902962b5 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -213,6 +213,34 @@ const struct boot_mode soc_boot_modes[] = { void s_init(void) { + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + int is_6q = is_cpu_type(MXC_CPU_MX6Q); + u32 mask480; + u32 mask528; + + /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs + * to make sure PFD is working right, otherwise, PFDs may + * not output clock after reset, MX6DL and MX6SL have added 396M pfd + * workaround in ROM code, as bus clock need it + */ + + mask480 = ANATOP_PFD_CLKGATE_MASK(0) | + ANATOP_PFD_CLKGATE_MASK(1) | + ANATOP_PFD_CLKGATE_MASK(2) | + ANATOP_PFD_CLKGATE_MASK(3); + mask528 = ANATOP_PFD_CLKGATE_MASK(0) | + ANATOP_PFD_CLKGATE_MASK(1) | + ANATOP_PFD_CLKGATE_MASK(3); + + /* + * Don't reset PFD2 on DL/S + */ + if (is_6q) + mask528 |= ANATOP_PFD_CLKGATE_MASK(2); + writel(mask480, &anatop->pfd_480_set); + writel(mask528, &anatop->pfd_528_set); + writel(mask480, &anatop->pfd_480_clr); + writel(mask528, &anatop->pfd_528_clr); } #ifdef CONFIG_IMX_HDMI diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index e903ed9ac4..9f989ff860 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -183,8 +183,7 @@ static void dpll3_init_34xx(u32 sil_index, u32 clk_index) * if running from flash, jump to small relocated code * area in SRAM. */ - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); + f_lock_pll = (void *) (SRAM_CLK_CODE); p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); @@ -401,8 +400,7 @@ static void dpll3_init_36xx(u32 sil_index, u32 clk_index) * if running from flash, jump to small relocated code * area in SRAM. */ - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); + f_lock_pll = (void *) (SRAM_CLK_CODE); p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 98c3c03a0e..6f7261b7b8 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -69,15 +69,13 @@ ENDPROC(do_omap3_emu_romcode_call) *************************************************************************/ ENTRY(cpy_clk_code) /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ + adr r0, go_to_speed /* copy from start of go_to_speed... */ + adr r2, lowlevel_init /* ... up to start of low_level_init */ next2: ldmia r0!, {r3 - r10} /* copy from source address [r0] */ stmia r1!, {r3 - r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ - bne next2 + blo next2 mov pc, lr /* back to caller */ ENDPROC(cpy_clk_code) diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 310df5a6e2..6a225c8cb2 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -50,6 +50,7 @@ static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { /* * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) * OMAP4430 OPP_TURBO frequency + * OMAP4470 OPP_NOM frequency */ static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ @@ -76,6 +77,7 @@ static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { }; /* OMAP4460 OPP_NOM frequency */ +/* OMAP4470 OPP_NOM (Low Power) frequency */ static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ @@ -198,6 +200,20 @@ struct dplls omap4460_dplls = { .ddr = NULL }; +struct dplls omap4470_dplls = { + .mpu = mpu_dpll_params_1600mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + struct pmic_data twl6030_4430es1 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, .step = 12660, /* 12.66 mV represented in uV */ @@ -208,6 +224,7 @@ struct pmic_data twl6030_4430es1 = { .pmic_write = omap_vc_bypass_send_value, }; +/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */ struct pmic_data twl6030 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, .step = 12660, /* 12.66 mV represented in uV */ @@ -271,6 +288,20 @@ struct vcores_data omap4460_volts = { .mm.pmic = &twl6030, }; +struct vcores_data omap4470_volts = { + .mpu.value = 1200, + .mpu.addr = SMPS_REG_ADDR_SMPS1, + .mpu.pmic = &twl6030, + + .core.value = 1126, + .core.addr = SMPS_REG_ADDR_SMPS1, + .core.pmic = &twl6030, + + .mm.value = 1137, + .mm.addr = SMPS_REG_ADDR_SMPS1, + .mm.pmic = &twl6030, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -476,6 +507,11 @@ void hw_data_init(void) *omap_vcores = &omap4460_volts; break; + case OMAP4470_ES1_0: + *dplls_data = &omap4470_dplls; + *omap_vcores = &omap4470_volts; + break; + default: printf("\n INVALID OMAP REVISION "); } diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 4da0fc0ad5..b0598a0774 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -138,6 +138,9 @@ void init_omap_revision(void) break; case MIDR_CORTEX_A9_R2P10: switch (readl(CONTROL_ID_CODE)) { + case OMAP4470_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP4470_ES1_0; + break; case OMAP4460_CONTROL_ID_CODE_ES1_1: *omap_si_rev = OMAP4460_ES1_1; break; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index d76dde719a..67a79261f7 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -60,6 +60,20 @@ static const struct emif_regs emif_regs_elpida_380_mhz_1cs = { .emif_ddr_phy_ctlr_1 = 0x049ff418 }; +const struct emif_regs emif_regs_elpida_400_mhz_1cs = { + .sdram_config_init = 0x80800eb2, + .sdram_config = 0x80801ab2, + .ref_ctrl = 0x00000618, + .sdram_tim1 = 0x10eb0662, + .sdram_tim2 = 0x20370dd2, + .sdram_tim3 = 0x00b1c33f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3215, + .temp_alert_config = 0x58016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; + const struct emif_regs emif_regs_elpida_400_mhz_2cs = { .sdram_config_init = 0x80000eb9, .sdram_config = 0x80001ab9, @@ -107,8 +121,10 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) *regs = &emif_regs_elpida_380_mhz_1cs; else if (omap4_rev == OMAP4430_ES2_0) *regs = &emif_regs_elpida_200_mhz_2cs; - else + else if (omap4_rev < OMAP4470_ES1_0) *regs = &emif_regs_elpida_400_mhz_2cs; + else + *regs = &emif_regs_elpida_400_mhz_1cs; } void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) __attribute__((weak, alias("emif_get_reg_dump_sdp"))); @@ -138,20 +154,31 @@ static const struct lpddr2_device_details elpida_2G_S4_details = { .manufacturer = LPDDR2_MANUFACTURER_ELPIDA }; +static const struct lpddr2_device_details elpida_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_ELPIDA +}; + struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs, struct lpddr2_device_details *lpddr2_dev_details) { u32 omap_rev = omap_revision(); /* EMIF1 & EMIF2 have identical configuration */ - if ((omap_rev == OMAP4430_ES1_0) && (cs == CS1)) { - /* Nothing connected on CS1 for ES1.0 */ + if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) + && (cs == CS1)) { + /* Nothing connected on CS1 for 4430/4470 ES1.0 */ return NULL; - } else { - /* In all other cases Elpida 2G device */ + } else if (omap_rev < OMAP4470_ES1_0) { + /* In all other 4430/4460 cases Elpida 2G device */ *lpddr2_dev_details = elpida_2G_S4_details; - return lpddr2_dev_details; + } else { + /* 4470: 4G device */ + *lpddr2_dev_details = elpida_4G_S4_details; } + return lpddr2_dev_details; } struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, @@ -265,7 +292,7 @@ void emif_get_device_timings_sdp(u32 emif_nr, /* Identical devices on EMIF1 & EMIF2 */ *cs0_device_timings = &elpida_2G_S4_timings; - if (omap_rev == OMAP4430_ES1_0) + if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) *cs1_device_timings = NULL; else *cs1_device_timings = &elpida_2G_S4_timings; diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile index 3b48ac9b2b..5024fc55e2 100644 --- a/arch/arm/cpu/armv7/socfpga/Makefile +++ b/arch/arm/cpu/armv7/socfpga/Makefile @@ -13,7 +13,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o SOBJS := lowlevel_init.o -COBJS-y := misc.o timer.o +COBJS-y := misc.o timer.o reset_manager.o COBJS-$(CONFIG_SPL_BUILD) += spl.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index 66edb3c20f..2f1c7160f1 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -6,36 +6,9 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/reset_manager.h> DECLARE_GLOBAL_DATA_PTR; -static const struct socfpga_reset_manager *reset_manager_base = - (void *)SOCFPGA_RSTMGR_ADDRESS; - -/* - * Write the reset manager register to cause reset - */ -void reset_cpu(ulong addr) -{ - /* request a warm reset */ - writel(RSTMGR_CTRL_SWWARMRSTREQ_LSB, &reset_manager_base->ctrl); - /* - * infinite loop here as watchdog will trigger and reset - * the processor - */ - while (1) - ; -} - -/* - * Release peripherals from reset based on handoff - */ -void reset_deassert_peripherals_handoff(void) -{ - writel(0, &reset_manager_base->per_mod_reset); -} - int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); diff --git a/arch/arm/cpu/armv7/socfpga/reset_manager.c b/arch/arm/cpu/armv7/socfpga/reset_manager.c new file mode 100644 index 0000000000..e320c011ae --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/reset_manager.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2013 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/reset_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_reset_manager *reset_manager_base = + (void *)SOCFPGA_RSTMGR_ADDRESS; + +/* + * Write the reset manager register to cause reset + */ +void reset_cpu(ulong addr) +{ + /* request a warm reset */ + writel((1 << RSTMGR_CTRL_SWWARMRSTREQ_LSB), + &reset_manager_base->ctrl); + /* + * infinite loop here as watchdog will trigger and reset + * the processor + */ + while (1) + ; +} + +/* + * Release peripherals from reset based on handoff + */ +void reset_deassert_peripherals_handoff(void) +{ + writel(0, &reset_manager_base->per_mod_reset); +} diff --git a/arch/arm/cpu/armv7/tegra114/config.mk b/arch/arm/cpu/armv7/tegra114/config.mk deleted file mode 100644 index cb1a19da82..0000000000 --- a/arch/arm/cpu/armv7/tegra114/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -CONFIG_ARCH_DEVICE_TREE := tegra114 diff --git a/arch/arm/cpu/armv7/tegra20/config.mk b/arch/arm/cpu/armv7/tegra20/config.mk deleted file mode 100644 index 3cac79bc1b..0000000000 --- a/arch/arm/cpu/armv7/tegra20/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2010,2011 -# NVIDIA Corporation <www.nvidia.com> -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# -CONFIG_ARCH_DEVICE_TREE := tegra20 diff --git a/arch/arm/cpu/armv7/tegra30/config.mk b/arch/arm/cpu/armv7/tegra30/config.mk deleted file mode 100644 index 719ca8192e..0000000000 --- a/arch/arm/cpu/armv7/tegra30/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -CONFIG_ARCH_DEVICE_TREE := tegra30 diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index e5494f7489..de6b08157e 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -14,6 +14,7 @@ LIB = $(obj)lib$(SOC).o COBJS-y := timer.o COBJS-y += cpu.o +COBJS-y += ddrc.o COBJS-y += slcr.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c new file mode 100644 index 0000000000..ba6a6aee5c --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/ddrc.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Control regsiter bitfield definitions */ +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK 0xC +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT 2 +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT 1 + +/* ECC scrub regsiter definitions */ +#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK 0x7 +#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED 0x4 + +void zynq_ddrc_init(void) +{ + u32 width, ecctype; + + width = readl(&ddrc_base->ddrc_ctrl); + width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >> + ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT; + ecctype = (readl(&ddrc_base->ecc_scrub) & + ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK); + + /* ECC is enabled when memory is in 16bit mode and it is enabled */ + if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) && + (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) { + puts("Memory: ECC enabled\n"); + /* + * Clear the first 1MB because it is not initialized from + * first stage bootloader. To get ECC to work all memory has + * been initialized by writing any value. + */ + memset(0, 0, 1 * 1024 * 1024); + } else { + puts("Memory: ECC disabled\n"); + } + + if (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT) + gd->ram_size /= 2; +} diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index e5fe992982..717ec65aee 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -70,7 +70,7 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) /* Configure GEM_RCLK_CTRL */ writel(rclk, &slcr_base->gem0_rclk_ctrl); } - + udelay(100000); out: zynq_slcr_lock(); } diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 490aed2e0d..23bf030655 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -97,4 +97,6 @@ SECTIONS /DISCARD/ : { *(.plt*) } /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } + /DISCARD/ : { *(.ARM.exidx*) } + /DISCARD/ : { *(.gnu.linkonce.armexidx.*) } } diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 10b56e0db4..73e6db8998 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -46,6 +46,26 @@ #define PRM_RSTCTRL_RESET 0x01 #define PRM_RSTST_WARM_RESET_MASK 0x232 +/* + * Watchdog: + * Using the prescaler, the OMAP watchdog could go for many + * months before firing. These limits work without scaling, + * with the 60 second default assumed by most tools and docs. + */ +#define TIMER_MARGIN_MAX (24 * 60 * 60) /* 1 day */ +#define TIMER_MARGIN_DEFAULT 60 /* 60 secs */ +#define TIMER_MARGIN_MIN 1 + +#define PTV 0 /* prescale */ +#define GET_WLDR_VAL(secs) (0xffffffff - ((secs) * (32768/(1<<PTV))) + 1) +#define WDT_WWPS_PEND_WCLR BIT(0) +#define WDT_WWPS_PEND_WLDR BIT(2) +#define WDT_WWPS_PEND_WTGR BIT(3) +#define WDT_WWPS_PEND_WSPR BIT(4) + +#define WDT_WCLR_PRE BIT(5) +#define WDT_WCLR_PTV_OFF 2 + #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ struct gpmc_cs { @@ -193,7 +213,8 @@ struct cm_perpll { unsigned int dcan1clkctrl; /* offset 0xC4 */ unsigned int resv6[2]; unsigned int emiffwclkctrl; /* offset 0xD0 */ - unsigned int resv7[2]; + unsigned int epwmss0clkctrl; /* offset 0xD4 */ + unsigned int epwmss2clkctrl; /* offset 0xD8 */ unsigned int l3instrclkctrl; /* offset 0xDC */ unsigned int l3clkctrl; /* Offset 0xE0 */ unsigned int resv8[4]; @@ -204,6 +225,7 @@ struct cm_perpll { unsigned int l4hsclkctrl; /* offset 0x120 */ unsigned int resv10[8]; unsigned int cpswclkstctrl; /* offset 0x144 */ + unsigned int lcdcclkstctrl; /* offset 0x148 */ }; #else /* Encapsulating core pll registers */ @@ -366,6 +388,8 @@ struct cm_perpll { struct cm_dpll { unsigned int resv1[2]; unsigned int clktimer2clk; /* offset 0x08 */ + unsigned int resv2[10]; + unsigned int clklcdcpixelclk; /* offset 0x34 */ }; /* Control Module RTC registers */ @@ -486,6 +510,54 @@ struct ctrl_dev { unsigned int resv4[4]; unsigned int miisel; /* offset 0x50 */ }; + +/* gmii_sel register defines */ +#define GMII1_SEL_MII 0x0 +#define GMII1_SEL_RMII 0x1 +#define GMII1_SEL_RGMII 0x2 +#define GMII2_SEL_MII 0x0 +#define GMII2_SEL_RMII 0x4 +#define GMII2_SEL_RGMII 0x8 +#define RGMII1_IDMODE BIT(4) +#define RGMII2_IDMODE BIT(5) +#define RMII1_IO_CLK_EN BIT(6) +#define RMII2_IO_CLK_EN BIT(7) + +#define MII_MODE_ENABLE (GMII1_SEL_MII | GMII2_SEL_MII) +#define RMII_MODE_ENABLE (GMII1_SEL_RMII | GMII2_SEL_RMII) +#define RGMII_MODE_ENABLE (GMII1_SEL_RGMII | GMII2_SEL_RGMII) +#define RGMII_INT_DELAY (RGMII1_IDMODE | RGMII2_IDMODE) +#define RMII_CHIPCKL_ENABLE (RMII1_IO_CLK_EN | RMII2_IO_CLK_EN) + +/* PWMSS */ +struct pwmss_regs { + unsigned int idver; + unsigned int sysconfig; + unsigned int clkconfig; + unsigned int clkstatus; +}; +#define ECAP_CLK_EN BIT(0) +#define ECAP_CLK_STOP_REQ BIT(1) + +struct pwmss_ecap_regs { + unsigned int tsctr; + unsigned int ctrphs; + unsigned int cap1; + unsigned int cap2; + unsigned int cap3; + unsigned int cap4; + unsigned int resv1[4]; + unsigned short ecctl1; + unsigned short ecctl2; +}; + +/* Capture Control register 2 */ +#define ECTRL2_SYNCOSEL_MASK (0x03 << 6) +#define ECTRL2_MDSL_ECAP BIT(9) +#define ECTRL2_CTRSTP_FREERUN BIT(4) +#define ECTRL2_PLSL_LOW BIT(10) +#define ECTRL2_SYNC_EN BIT(5) + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 2055b25494..ee5fce0da1 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -68,4 +68,5 @@ /* CPSW Config space */ #define CPSW_BASE 0x4A100000 +int clk_get(int clk); #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h index 8973fd884f..e4231c81ad 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h @@ -58,4 +58,11 @@ #define USB0_OTG_BASE 0x47401000 #define USB1_OTG_BASE 0x47401800 +/* LCD Controller */ +#define LCD_CNTL_BASE 0x4830E000 + +/* PWMSS */ +#define PWMSS0_BASE 0x48300000 +#define AM33XX_ECAP0_BASE 0x48300100 + #endif /* __AM33XX_HARDWARE_AM33XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 1f8431196f..225072186d 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -18,7 +18,7 @@ #ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 +#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800 #elif defined(CONFIG_TI81XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index d6597023c6..9f54fddce5 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -10,6 +10,7 @@ #define AT91_COMMON_H void at91_can_hw_init(void); +void at91_gmac_hw_init(void); void at91_macb_hw_init(void); void at91_mci_hw_init(void); void at91_serial0_hw_init(void); diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index fcc6fdc219..a47103851e 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -162,6 +162,12 @@ #define ATMEL_ID_UHP ATMEL_ID_UHPHS /* + * PMECC table in ROM + */ +#define ATMEL_PMECC_INDEX_OFFSET_512 0x8000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x10000 + +/* * at91sam9x5 specific prototypes */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h index 49bd335102..fefee5ed25 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3.h +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -191,8 +191,6 @@ */ #define ATMEL_PMECC_INDEX_OFFSET_512 0x10000 #define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000 -#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000 -#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000 /* * SAMA5D3 specific prototypes diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h index c060894f14..6caa9b6ed8 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3_smc.h +++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h @@ -17,7 +17,6 @@ #define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C) #else struct at91_cs { - u32 reserved[96]; u32 setup; /* 0x600 SMC Setup Register */ u32 pulse; /* 0x604 SMC Pulse Register */ u32 cycle; /* 0x608 SMC Cycle Register */ @@ -26,6 +25,7 @@ struct at91_cs { }; struct at91_smc { + u32 reserved[384]; struct at91_cs cs[4]; }; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 8916d9d16b..498a9ffc04 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -291,7 +291,7 @@ struct exynos_platform_mipi_dsim { */ struct mipi_dsim_master_ops { int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, unsigned int data0, unsigned int data1); int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 406d150ae2..9ee79aede3 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -46,10 +46,10 @@ u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); int mxc_set_clock(u32 ref, u32 freq, u32 clk_type); void set_usb_phy_clk(void); -void enable_usb_phy1_clk(unsigned char enable); -void enable_usb_phy2_clk(unsigned char enable); +void enable_usb_phy1_clk(bool enable); +void enable_usb_phy2_clk(bool enable); void set_usboh3_clk(void); -void enable_usboh3_clk(unsigned char enable); +void enable_usboh3_clk(bool enable); void mxc_set_sata_internal_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); void enable_nfc_clk(unsigned char enable); diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h new file mode 100644 index 0000000000..d724f206f0 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/hab.h @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + * +*/ + +#ifndef __SECURE_MX6Q_H__ +#define __SECURE_MX6Q_H__ + +#include <linux/types.h> + +/* -------- start of HAB API updates ------------*/ +/* The following are taken from HAB4 SIS */ + +/* Status definitions */ +enum hab_status { + HAB_STS_ANY = 0x00, + HAB_FAILURE = 0x33, + HAB_WARNING = 0x69, + HAB_SUCCESS = 0xf0 +}; + +/* Security Configuration definitions */ +enum hab_config { + HAB_CFG_RETURN = 0x33, /**< Field Return IC */ + HAB_CFG_OPEN = 0xf0, /**< Non-secure IC */ + HAB_CFG_CLOSED = 0xcc /**< Secure IC */ +}; + +/* State definitions */ +enum hab_state { + HAB_STATE_INITIAL = 0x33, /**< Initialising state (transitory) */ + HAB_STATE_CHECK = 0x55, /**< Check state (non-secure) */ + HAB_STATE_NONSECURE = 0x66, /**< Non-secure state */ + HAB_STATE_TRUSTED = 0x99, /**< Trusted state */ + HAB_STATE_SECURE = 0xaa, /**< Secure state */ + HAB_STATE_FAIL_SOFT = 0xcc, /**< Soft fail state */ + HAB_STATE_FAIL_HARD = 0xff, /**< Hard fail state (terminal) */ + HAB_STATE_NONE = 0xf0, /**< No security state machine */ + HAB_STATE_MAX +}; + +/*Function prototype description*/ +typedef enum hab_status hab_rvt_report_event_t(enum hab_status, uint32_t, + uint8_t* , size_t*); +typedef enum hab_status hab_rvt_report_status_t(enum hab_config *, + enum hab_state *); +typedef enum hab_status hab_loader_callback_f_t(void**, size_t*, const void*); +typedef enum hab_status hab_rvt_entry_t(void); +typedef enum hab_status hab_rvt_exit_t(void); +typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t, + void **, size_t *, hab_loader_callback_f_t); +typedef void hapi_clock_init_t(void); + +#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4) +#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8) +#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4) +#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098) +#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C) +#define HAB_RVT_CLOCK_INIT ((hapi_clock_init_t *)0x0000024D) + +#define HAB_CID_ROM 0 /**< ROM Caller ID */ +#define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/ +/* ----------- end of HAB API updates ------------*/ + +#endif diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 5d6bccbc0c..7ef7152678 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -456,7 +456,13 @@ struct fuse_bank0_regs { u32 uid_low; u32 rsvd1[3]; u32 uid_high; - u32 rsvd2[0x17]; + u32 rsvd2[3]; + u32 rsvd3[4]; + u32 rsvd4[4]; + u32 rsvd5[4]; + u32 cfg5; + u32 rsvd6[3]; + u32 rsvd7[4]; }; struct fuse_bank4_regs { @@ -629,29 +635,12 @@ struct anatop_regs { u32 digprog_sololite; /* 0x280 */ }; -#define ANATOP_PFD_480_PFD0_FRAC_SHIFT 0 -#define ANATOP_PFD_480_PFD0_FRAC_MASK (0x3f<<ANATOP_PFD_480_PFD0_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD0_STABLE_SHIFT 6 -#define ANATOP_PFD_480_PFD0_STABLE_MASK (1<<ANATOP_PFD_480_PFD0_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD0_CLKGATE_SHIFT 7 -#define ANATOP_PFD_480_PFD0_CLKGATE_MASK (1<<ANATOP_PFD_480_PFD0_CLKGATE_SHIFT) -#define ANATOP_PFD_480_PFD1_FRAC_SHIFT 8 -#define ANATOP_PFD_480_PFD1_FRAC_MASK (0x3f<<ANATOP_PFD_480_PFD1_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD1_STABLE_SHIFT 14 -#define ANATOP_PFD_480_PFD1_STABLE_MASK (1<<ANATOP_PFD_480_PFD1_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD1_CLKGATE_SHIFT 15 -#define ANATOP_PFD_480_PFD1_CLKGATE_MASK (0x3f<<ANATOP_PFD_480_PFD1_CLKGATE_SHIFT) -#define ANATOP_PFD_480_PFD2_FRAC_SHIFT 16 -#define ANATOP_PFD_480_PFD2_FRAC_MASK (1<<ANATOP_PFD_480_PFD2_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD2_STABLE_SHIFT 22 -#define ANATOP_PFD_480_PFD2_STABLE_MASK (1<<ANATOP_PFD_480_PFD2_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD2_CLKGATE_SHIFT 23 -#define ANATOP_PFD_480_PFD2_CLKGATE_MASK (0x3f<<ANATOP_PFD_480_PFD2_CLKGATE_SHIFT) -#define ANATOP_PFD_480_PFD3_FRAC_SHIFT 24 -#define ANATOP_PFD_480_PFD3_FRAC_MASK (1<<ANATOP_PFD_480_PFD3_FRAC_SHIFT) -#define ANATOP_PFD_480_PFD3_STABLE_SHIFT 30 -#define ANATOP_PFD_480_PFD3_STABLE_MASK (1<<ANATOP_PFD_480_PFD3_STABLE_SHIFT) -#define ANATOP_PFD_480_PFD3_CLKGATE_SHIFT 31 +#define ANATOP_PFD_FRAC_SHIFT(n) ((n)*8) +#define ANATOP_PFD_FRAC_MASK(n) (0x3f<<ANATOP_PFD_FRAC_SHIFT(n)) +#define ANATOP_PFD_STABLE_SHIFT(n) (6+((n)*8)) +#define ANATOP_PFD_STABLE_MASK(n) (1<<ANATOP_PFD_STABLE_SHIFT(n)) +#define ANATOP_PFD_CLKGATE_SHIFT(n) (7+((n)*8)) +#define ANATOP_PFD_CLKGATE_MASK(n) (1<<ANATOP_PFD_CLKGATE_SHIFT(n)) struct iomuxc_base_regs { u32 gpr[14]; /* 0x000 */ diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index bfdfd2911d..8c21364e71 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -19,6 +19,13 @@ #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) u32 get_cpu_rev(void); + +/* returns MXC_CPU_ value */ +#define cpu_type(rev) (((rev) >> 12)&0xff) + +/* use with MXC_CPU_ constants */ +#define is_cpu_type(cpu) (cpu_type(get_cpu_rev()) == cpu) + const char *get_imx_type(u32 imxtype); unsigned imx_ddr_size(void); diff --git a/arch/arm/include/asm/arch-mxs/regs-uartapp.h b/arch/arm/include/asm/arch-mxs/regs-uartapp.h new file mode 100644 index 0000000000..7ceb810dc6 --- /dev/null +++ b/arch/arm/include/asm/arch-mxs/regs-uartapp.h @@ -0,0 +1,220 @@ +/* + * Freescale MXS UARTAPP Register Definitions + * + * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com> + * + * Based on code from LTIB: + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ARCH_ARM___MXS_UARTAPP_H +#define __ARCH_ARM___MXS_UARTAPP_H + +#include <asm/imx-common/regs-common.h> + +#ifndef __ASSEMBLY__ +struct mxs_uartapp_regs { + mxs_reg_32(hw_uartapp_ctrl0) + mxs_reg_32(hw_uartapp_ctrl1) + mxs_reg_32(hw_uartapp_ctrl2) + mxs_reg_32(hw_uartapp_linectrl) + mxs_reg_32(hw_uartapp_linectrl2) + mxs_reg_32(hw_uartapp_intr) + mxs_reg_32(hw_uartapp_data) + mxs_reg_32(hw_uartapp_stat) + mxs_reg_32(hw_uartapp_debug) + mxs_reg_32(hw_uartapp_version) + mxs_reg_32(hw_uartapp_autobaud) +}; +#endif + +#define UARTAPP_CTRL0_SFTRST_MASK (1 << 31) +#define UARTAPP_CTRL0_CLKGATE_MASK (1 << 30) +#define UARTAPP_CTRL0_RUN_MASK (1 << 29) +#define UARTAPP_CTRL0_RX_SOURCE_MASK (1 << 28) +#define UARTAPP_CTRL0_RXTO_ENABLE_MASK (1 << 27) +#define UARTAPP_CTRL0_RXTIMEOUT_OFFSET 16 +#define UARTAPP_CTRL0_RXTIMEOUT_MASK (0x7FF << 16) +#define UARTAPP_CTRL0_XFER_COUNT_OFFSET 0 +#define UARTAPP_CTRL0_XFER_COUNT_MASK 0xFFFF + +#define UARTAPP_CTRL1_RUN_MASK (1 << 28) + +#define UARTAPP_CTRL1_XFER_COUNT_OFFSET 0 +#define UARTAPP_CTRL1_XFER_COUNT_MASK 0xFFFF + +#define UARTAPP_CTRL2_INVERT_RTS_MASK (1 << 31) +#define UARTAPP_CTRL2_INVERT_CTS_MASK (1 << 30) +#define UARTAPP_CTRL2_INVERT_TX_MASK (1 << 29) +#define UARTAPP_CTRL2_INVERT_RX_MASK (1 << 28) +#define UARTAPP_CTRL2_RTS_SEMAPHORE_MASK (1 << 27) +#define UARTAPP_CTRL2_DMAONERR_MASK (1 << 26) +#define UARTAPP_CTRL2_TXDMAE_MASK (1 << 25) +#define UARTAPP_CTRL2_RXDMAE_MASK (1 << 24) +#define UARTAPP_CTRL2_RXIFLSEL_OFFSET 20 +#define UARTAPP_CTRL2_RXIFLSEL_MASK (0x7 << 20) + +#define UARTAPP_CTRL2_RXIFLSEL_NOT_EMPTY (0x0 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_ONE_QUARTER (0x1 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_ONE_HALF (0x2 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_THREE_QUARTERS (0x3 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_SEVEN_EIGHTHS (0x4 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_INVALID5 (0x5 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_INVALID6 (0x6 << 20) +#define UARTAPP_CTRL2_RXIFLSEL_INVALID7 (0x7 << 20) +#define UARTAPP_CTRL2_TXIFLSEL_OFFSET 16 +#define UARTAPP_CTRL2_TXIFLSEL_MASK (0x7 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_EMPTY (0x0 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_ONE_QUARTER (0x1 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_ONE_HALF (0x2 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_THREE_QUARTERS (0x3 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_SEVEN_EIGHTHS (0x4 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_INVALID5 (0x5 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_INVALID6 (0x6 << 16) +#define UARTAPP_CTRL2_TXIFLSEL_INVALID7 (0x7 << 16) +#define UARTAPP_CTRL2_CTSEN_MASK (1 << 15) +#define UARTAPP_CTRL2_RTSEN_MASK (1 << 14) +#define UARTAPP_CTRL2_OUT2_MASK (1 << 13) +#define UARTAPP_CTRL2_OUT1_MASK (1 << 12) +#define UARTAPP_CTRL2_RTS_MASK (1 << 11) +#define UARTAPP_CTRL2_DTR_MASK (1 << 10) +#define UARTAPP_CTRL2_RXE_MASK (1 << 9) +#define UARTAPP_CTRL2_TXE_MASK (1 << 8) +#define UARTAPP_CTRL2_LBE_MASK (1 << 7) +#define UARTAPP_CTRL2_USE_LCR2_MASK (1 << 6) + +#define UARTAPP_CTRL2_SIRLP_MASK (1 << 2) +#define UARTAPP_CTRL2_SIREN_MASK (1 << 1) +#define UARTAPP_CTRL2_UARTEN_MASK 0x01 + +#define UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET 16 +#define UARTAPP_LINECTRL_BAUD_DIVINT_MASK (0xFFFF << 16) +#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET 6 + +#define UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET 8 +#define UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK (0x3F << 8) +#define UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK 0x3F + +#define UARTAPP_LINECTRL_SPS_MASK (1 << 7) +#define UARTAPP_LINECTRL_WLEN_OFFSET 5 +#define UARTAPP_LINECTRL_WLEN_MASK (0x03 << 5) +#define UARTAPP_LINECTRL_WLEN_5BITS (0x00 << 5) +#define UARTAPP_LINECTRL_WLEN_6BITS (0x01 << 5) +#define UARTAPP_LINECTRL_WLEN_7BITS (0x02 << 5) +#define UARTAPP_LINECTRL_WLEN_8BITS (0x03 << 5) + +#define UARTAPP_LINECTRL_FEN_MASK (1 << 4) +#define UARTAPP_LINECTRL_STP2_MASK (1 << 3) +#define UARTAPP_LINECTRL_EPS_MASK (1 << 2) +#define UARTAPP_LINECTRL_PEN_MASK (1 << 1) +#define UARTAPP_LINECTRL_BRK_MASK 1 + +#define UARTAPP_LINECTRL2_BAUD_DIVINT_OFFSET 16 +#define UARTAPP_LINECTRL2_BAUD_DIVINT_MASK (0xFFFF << 16) +#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVINT_OFFSET 6 + +#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_OFFSET 8 +#define UARTAPP_LINECTRL2_BAUD_DIVFRAC_MASK (0x3F << 8) +#define UARTAPP_LINECTRL2_EXTRACT_BAUD_DIVFRAC_MASK 0x3F + +#define UARTAPP_LINECTRL2_SPS_MASK (1 << 7) +#define UARTAPP_LINECTRL2_WLEN_OFFSET 5 +#define UARTAPP_LINECTRL2_WLEN_MASK (0x03 << 5) +#define UARTAPP_LINECTRL2_WLEN_5BITS (0x00 << 5) +#define UARTAPP_LINECTRL2_WLEN_6BITS (0x01 << 5) +#define UARTAPP_LINECTRL2_WLEN_7BITS (0x02 << 5) +#define UARTAPP_LINECTRL2_WLEN_8BITS (0x03 << 5) + +#define UARTAPP_LINECTRL2_FEN_MASK (1 << 4) +#define UARTAPP_LINECTRL2_STP2_MASK (1 << 3) +#define UARTAPP_LINECTRL2_EPS_MASK (1 << 2) +#define UARTAPP_LINECTRL2_PEN_MASK (1 << 1) + +#define UARTAPP_INTR_ABDIEN_MASK (1 << 27) +#define UARTAPP_INTR_OEIEN_MASK (1 << 26) +#define UARTAPP_INTR_BEIEN_MASK (1 << 25) +#define UARTAPP_INTR_PEIEN_MASK (1 << 24) +#define UARTAPP_INTR_FEIEN_MASK (1 << 23) +#define UARTAPP_INTR_RTIEN_MASK (1 << 22) +#define UARTAPP_INTR_TXIEN_MASK (1 << 21) +#define UARTAPP_INTR_RXIEN_MASK (1 << 20) +#define UARTAPP_INTR_DSRMIEN_MASK (1 << 19) +#define UARTAPP_INTR_DCDMIEN_MASK (1 << 18) +#define UARTAPP_INTR_CTSMIEN_MASK (1 << 17) +#define UARTAPP_INTR_RIMIEN_MASK (1 << 16) + +#define UARTAPP_INTR_ABDIS_MASK (1 << 11) +#define UARTAPP_INTR_OEIS_MASK (1 << 10) +#define UARTAPP_INTR_BEIS_MASK (1 << 9) +#define UARTAPP_INTR_PEIS_MASK (1 << 8) +#define UARTAPP_INTR_FEIS_MASK (1 << 7) +#define UARTAPP_INTR_RTIS_MASK (1 << 6) +#define UARTAPP_INTR_TXIS_MASK (1 << 5) +#define UARTAPP_INTR_RXIS_MASK (1 << 4) +#define UARTAPP_INTR_DSRMIS_MASK (1 << 3) +#define UARTAPP_INTR_DCDMIS_MASK (1 << 2) +#define UARTAPP_INTR_CTSMIS_MASK (1 << 1) +#define UARTAPP_INTR_RIMIS_MASK 0x1 + +#define UARTAPP_DATA_DATA_OFFSET 0 +#define UARTAPP_DATA_DATA_MASK 0xFFFFFFFF +#define UARTAPP_STAT_PRESENT_MASK (1 << 31) +#define UARTAPP_STAT_PRESENT_UNAVAILABLE (0x0 << 31) +#define UARTAPP_STAT_PRESENT_AVAILABLE (0x1 << 31) + +#define UARTAPP_STAT_HISPEED_MASK (1 << 30) +#define UARTAPP_STAT_HISPEED_UNAVAILABLE (0x0 << 30) +#define UARTAPP_STAT_HISPEED_AVAILABLE (0x1 << 30) + +#define UARTAPP_STAT_BUSY_MASK (1 << 29) +#define UARTAPP_STAT_CTS_MASK (1 << 28) +#define UARTAPP_STAT_TXFE_MASK (1 << 27) +#define UARTAPP_STAT_RXFF_MASK (1 << 26) +#define UARTAPP_STAT_TXFF_MASK (1 << 25) +#define UARTAPP_STAT_RXFE_MASK (1 << 24) +#define UARTAPP_STAT_RXBYTE_INVALID_OFFSET 20 +#define UARTAPP_STAT_RXBYTE_INVALID_MASK (0xF << 20) + +#define UARTAPP_STAT_OERR_MASK (1 << 19) +#define UARTAPP_STAT_BERR_MASK (1 << 18) +#define UARTAPP_STAT_PERR_MASK (1 << 17) +#define UARTAPP_STAT_FERR_MASK (1 << 16) +#define UARTAPP_STAT_RXCOUNT_OFFSET 0 +#define UARTAPP_STAT_RXCOUNT_MASK 0xFFFF + +#define UARTAPP_DEBUG_RXIBAUD_DIV_OFFSET 16 +#define UARTAPP_DEBUG_RXIBAUD_DIV_MASK (0xFFFF << 16) + +#define UARTAPP_DEBUG_RXFBAUD_DIV_OFFSET 10 +#define UARTAPP_DEBUG_RXFBAUD_DIV_MASK (0x3F << 10) + +#define UARTAPP_DEBUG_TXDMARUN_MASK (1 << 5) +#define UARTAPP_DEBUG_RXDMARUN_MASK (1 << 4) +#define UARTAPP_DEBUG_TXCMDEND_MASK (1 << 3) +#define UARTAPP_DEBUG_RXCMDEND_MASK (1 << 2) +#define UARTAPP_DEBUG_TXDMARQ_MASK (1 << 1) +#define UARTAPP_DEBUG_RXDMARQ_MASK 0x01 + +#define UARTAPP_VERSION_MAJOR_OFFSET 24 +#define UARTAPP_VERSION_MAJOR_MASK (0xFF << 24) + +#define UARTAPP_VERSION_MINOR_OFFSET 16 +#define UARTAPP_VERSION_MINOR_MASK (0xFF << 16) + +#define UARTAPP_VERSION_STEP_OFFSET 0 +#define UARTAPP_VERSION_STEP_MASK 0xFFFF + +#define UARTAPP_AUTOBAUD_REFCHAR1_OFFSET 24 +#define UARTAPP_AUTOBAUD_REFCHAR1_MASK (0xFF << 24) + +#define UARTAPP_AUTOBAUD_REFCHAR0_OFFSET 16 +#define UARTAPP_AUTOBAUD_REFCHAR0_MASK (0xFF << 16) + +#define UARTAPP_AUTOBAUD_UPDATE_TX_MASK (1 << 4) +#define UARTAPP_AUTOBAUD_TWO_REF_CHARS_MASK (1 << 3) +#define UARTAPP_AUTOBAUD_START_WITH_RUNBIT_MASK (1 << 2) +#define UARTAPP_AUTOBAUD_START_BAUD_DETECT_MASK (1 << 1) +#define UARTAPP_AUTOBAUD_BAUD_DETECT_ENABLE_MASK 0x01 +#endif /* __ARCH_ARM___UARTAPP_H */ diff --git a/arch/arm/include/asm/arch-omap3/clock.h b/arch/arm/include/asm/arch-omap3/clock.h index 514839c778..be669c156f 100644 --- a/arch/arm/include/asm/arch-omap3/clock.h +++ b/arch/arm/include/asm/arch-omap3/clock.h @@ -63,6 +63,4 @@ extern dpll_param *get_36x_core_dpll_param(void); extern dpll_param *get_36x_per_dpll_param(void); extern dpll_param *get_36x_per2_dpll_param(void); -extern void *_end_vect, *_start; - #endif diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h index d72f5e50ad..f664c11990 100644 --- a/arch/arm/include/asm/arch-omap3/gpio.h +++ b/arch/arm/include/asm/arch-omap3/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP3_H #define _GPIO_OMAP3_H diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h index b2e03d6e1e..f3a682a197 100644 --- a/arch/arm/include/asm/arch-omap4/clock.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -149,11 +149,16 @@ /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 -/* SMPS */ +/* PMIC */ #define SMPS_I2C_SLAVE_ADDR 0x12 +/* TWL6030 SMPS */ #define SMPS_REG_ADDR_VCORE1 0x55 #define SMPS_REG_ADDR_VCORE2 0x5B #define SMPS_REG_ADDR_VCORE3 0x61 +/* TWL6032 SMPS */ +#define SMPS_REG_ADDR_SMPS1 0x55 +#define SMPS_REG_ADDR_SMPS2 0x5B +#define SMPS_REG_ADDR_SMPS5 0x49 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000 diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h index fdf65edab8..72ba1d71a2 100644 --- a/arch/arm/include/asm/arch-omap4/gpio.h +++ b/arch/arm/include/asm/arch-omap4/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP4_H #define _GPIO_OMAP4_H diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 3823a37f2f..9129c0dd7c 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -41,6 +41,7 @@ #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F +#define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F /* UART */ #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 3adfc090fe..9a2166ce4a 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -149,6 +149,23 @@ /* CM_L3INIT_USBPHY_CLKCTRL */ #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8 +/* CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OPTFCLKEN_FUNC48M_CLK (1 << 15) +#define OPTFCLKEN_HSIC480M_P2_CLK (1 << 14) +#define OPTFCLKEN_HSIC480M_P1_CLK (1 << 13) +#define OPTFCLKEN_HSIC60M_P2_CLK (1 << 12) +#define OPTFCLKEN_HSIC60M_P1_CLK (1 << 11) +#define OPTFCLKEN_UTMI_P3_CLK (1 << 10) +#define OPTFCLKEN_UTMI_P2_CLK (1 << 9) +#define OPTFCLKEN_UTMI_P1_CLK (1 << 8) +#define OPTFCLKEN_HSIC480M_P3_CLK (1 << 7) +#define OPTFCLKEN_HSIC60M_P3_CLK (1 << 6) + +/* CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OPTFCLKEN_USB_CH0_CLK_ENABLE (1 << 8) +#define OPTFCLKEN_USB_CH1_CLK_ENABLE (1 << 9) +#define OPTFCLKEN_USB_CH2_CLK_ENABLE (1 << 10) + /* CM_MPU_MPU_CLKCTRL */ #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h new file mode 100644 index 0000000000..3921e4ab40 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/ehci.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com* + * Author: Govindraj R <govindraj.raja@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EHCI_H +#define _EHCI_H + +#define OMAP_EHCI_BASE (OMAP54XX_L4_CORE_BASE + 0x64C00) +#define OMAP_UHH_BASE (OMAP54XX_L4_CORE_BASE + 0x64000) +#define OMAP_USBTLL_BASE (OMAP54XX_L4_CORE_BASE + 0x62000) + +/* TLL Register Set */ +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1 + +#define OMAP_UHH_SYSCONFIG_SOFTRESET 1 +#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4) + +#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \ + OMAP_UHH_SYSCONFIG_NOSTDBY) + +#endif /* _EHCI_H */ diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h index 7c82f90360..9dd03c9fa6 100644 --- a/arch/arm/include/asm/arch-omap5/gpio.h +++ b/arch/arm/include/asm/arch-omap5/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP5_H #define _GPIO_OMAP5_H diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 597c692b97..e9a51d3403 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -153,6 +153,15 @@ struct s32ktimer { #define EFUSE_4 0x45145100 #endif /* __ASSEMBLY__ */ +/* + * In all cases, the TRM defines the RAM Memory Map for the processor + * and indicates the area for the downloaded image. We use all of that + * space for download and once up and running may use other parts of the + * map for our needs. We set a scratch space that is at the end of the + * OMAP5 download area, but within the DRA7xx download area (as it is + * much larger) and do not, at this time, make use of the additional + * space. + */ #ifdef CONFIG_DRA7XX #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ @@ -160,7 +169,7 @@ struct s32ktimer { #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ #endif -#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START +#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000 /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 diff --git a/arch/arm/include/asm/arch-socfpga/reset_manager.h b/arch/arm/include/asm/arch-socfpga/reset_manager.h index 13d7357702..3e95476828 100644 --- a/arch/arm/include/asm/arch-socfpga/reset_manager.h +++ b/arch/arm/include/asm/arch-socfpga/reset_manager.h @@ -11,16 +11,20 @@ void reset_cpu(ulong addr); void reset_deassert_peripherals_handoff(void); struct socfpga_reset_manager { - u32 padding1; + u32 status; u32 ctrl; - u32 padding2; - u32 padding3; + u32 counts; + u32 padding1; u32 mpu_mod_reset; u32 per_mod_reset; u32 per2_mod_reset; u32 brg_mod_reset; }; +#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) +#define RSTMGR_CTRL_SWWARMRSTREQ_LSB 2 +#else #define RSTMGR_CTRL_SWWARMRSTREQ_LSB 1 +#endif #endif /* _RESET_MANAGER_H_ */ diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index 25f0e3d9c7..cd69677729 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -17,6 +17,9 @@ #define ZYNQ_SDHCI_BASEADDR1 0xE0101000 #define ZYNQ_I2C_BASEADDR0 0xE0004000 #define ZYNQ_I2C_BASEADDR1 0xE0005000 +#define ZYNQ_SPI_BASEADDR0 0xE0006000 +#define ZYNQ_SPI_BASEADDR1 0xE0007000 +#define ZYNQ_DDRC_BASEADDR 0xF8006000 /* Reflect slcr offsets */ struct slcr_regs { @@ -84,4 +87,11 @@ struct scu_regs { #define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR) +struct ddrc_regs { + u32 ddrc_ctrl; /* 0x0 */ + u32 reserved[60]; + u32 ecc_scrub; /* 0xF4 */ +}; +#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR) + #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 19a4eec6a9..110de90922 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -14,6 +14,7 @@ extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_idcode(void); +extern void zynq_ddrc_init(void); /* Driver extern functions */ extern int zynq_sdhci_init(u32 regbase); diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h index 77e81701b8..ac83a539a8 100644 --- a/arch/arm/include/asm/ehci-omap.h +++ b/arch/arm/include/asm/ehci-omap.h @@ -42,6 +42,7 @@ enum usbhs_omap_port_mode { /* Values of UHH_REVISION - Note: these are not given in the TRM */ #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ +#define OMAP_USBHS_REV2_1 0x50700101 /* OMAP5 */ /* UHH Register Set */ #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) @@ -60,6 +61,7 @@ enum usbhs_omap_port_mode { #define OMAP_P2_MODE_CLEAR (3 << 18) #define OMAP_P2_MODE_TLL (1 << 18) #define OMAP_P2_MODE_HSIC (3 << 18) +#define OMAP_P3_MODE_CLEAR (3 << 20) #define OMAP_P3_MODE_HSIC (3 << 20) /* EHCI Register Set */ diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h index 5f516ef6e0..d5c1f7f255 100644 --- a/arch/arm/include/asm/imx-common/dma.h +++ b/arch/arm/include/asm/imx-common/dma.h @@ -161,4 +161,6 @@ void mxs_dma_init(void); int mxs_dma_init_channel(int chan); int mxs_dma_release(int chan); +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc); + #endif /* __DMA_H__ */ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 66f416f99c..5e2f027ba4 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -622,6 +622,7 @@ static inline u8 is_omap54xx(void) #define OMAP4430_ES2_3 0x44300230 #define OMAP4460_ES1_0 0x44600100 #define OMAP4460_ES1_1 0x44600110 +#define OMAP4470_ES1_0 0x44700100 /* omap5 */ #define OMAP5430_SILICON_ID_INVALID 0 diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 1ebfa8694f..5d25d04c3b 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_H #define _GPIO_H diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index f74a0b7c0e..f9aff4d894 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -247,7 +247,7 @@ static struct { static void portmux_setup(unsigned short per) { - u16 y, offset, muxreg; + u16 y, offset, muxreg, mask; u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { @@ -258,12 +258,13 @@ static void portmux_setup(unsigned short per) offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); - if (offset != 1) - muxreg &= ~(1 << offset); + if (offset == 1) + mask = 3; else - muxreg &= ~(3 << 1); + mask = 1; - muxreg |= (function << offset); + muxreg &= ~(mask << offset); + muxreg |= ((function & mask) << offset); bfin_write_PORT_MUX(muxreg); } } @@ -662,8 +663,8 @@ void special_gpio_free(unsigned gpio) return; } - reserve(special_gpio, gpio); - reserve(peri, gpio); + unreserve(special_gpio, gpio); + unreserve(peri, gpio); set_label(gpio, "free"); } #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 10223bdb79..17d1f468dd 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -67,6 +67,7 @@ static int display_banner(void) static int init_baudrate(void) { gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + gd->bd->bi_baudrate = gd->baudrate; return 0; } @@ -235,8 +236,6 @@ static int global_board_data_init(void) bd->bi_sclk = get_sclk(); bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - bd->bi_baudrate = (gd->baudrate > 0) - ? simple_strtoul(gd->baudrate, NULL, 10) : CONFIG_BAUDRATE; return 0; } diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 6692f24a0b..fc545a9ee6 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -15,5 +15,3 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds - -CONFIG_ARCH_DEVICE_TREE := microblaze diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 8267191fde..f7182f27e9 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -16,6 +16,7 @@ #include <stdio_dev.h> #include <serial.h> #include <net.h> +#include <spi.h> #include <linux/compiler.h> #include <asm/processor.h> #include <asm/microblaze_intc.h> @@ -147,6 +148,10 @@ void board_init_f(ulong not_used) } #endif +#ifdef CONFIG_SPI + spi_init(); +#endif + /* relocate environment function pointers etc. */ env_relocate(); diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index cd29734789..3a891ba627 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -7,4 +7,7 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH + #endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index e9f82f711a..f91406c060 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -19,11 +19,7 @@ LGOBJS := $(addprefix $(obj),$(GLSOBJS)) SOBJS-y += COBJS-y += board.o -ifeq ($(CONFIG_QEMU_MIPS),y) -COBJS-$(CONFIG_CMD_BOOTM) += bootm_qemu_mips.o -else COBJS-$(CONFIG_CMD_BOOTM) += bootm.o -endif SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index ade9af47e3..66340ea470 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -17,23 +17,148 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 +#if defined(CONFIG_QEMU_MALTA) +#define mips_boot_qemu_malta 1 +#else +#define mips_boot_qemu_malta 0 +#endif + static int linux_argc; static char **linux_argv; +static char *linux_argp; static char **linux_env; static char *linux_env_p; static int linux_env_idx; -static void linux_params_init(ulong start, char *commandline); -static void linux_env_set(char *env_name, char *env_val); +static ulong arch_get_sp(void) +{ + ulong ret; + + __asm__ __volatile__("move %0, $sp" : "=r"(ret) : ); + + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + sp = arch_get_sp(); + debug("## Current stack ends at 0x%08lx\n", sp); + + /* adjust sp by 4K to be safe */ + sp -= 4096; + lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp); +} + +static void linux_cmdline_init(void) +{ + linux_argc = 1; + linux_argv = (char **)UNCACHED_SDRAM(gd->bd->bi_boot_params); + linux_argv[0] = 0; + linux_argp = (char *)(linux_argv + LINUX_MAX_ARGS); +} + +static void linux_cmdline_set(const char *value, size_t len) +{ + linux_argv[linux_argc] = linux_argp; + memcpy(linux_argp, value, len); + linux_argp[len] = 0; + + linux_argp += len + 1; + linux_argc++; +} + +static void linux_cmdline_dump(void) +{ + int i; + + debug("## cmdline argv at 0x%p, argp at 0x%p\n", + linux_argv, linux_argp); + + for (i = 1; i < linux_argc; i++) + debug(" arg %03d: %s\n", i, linux_argv[i]); +} + +static void boot_cmdline_linux(bootm_headers_t *images) +{ + const char *bootargs, *next, *quote; + + linux_cmdline_init(); + + bootargs = getenv("bootargs"); + if (!bootargs) + return; + + next = bootargs; + + while (bootargs && *bootargs && linux_argc < LINUX_MAX_ARGS) { + quote = strchr(bootargs, '"'); + next = strchr(bootargs, ' '); + + while (next && quote && quote < next) { + /* + * we found a left quote before the next blank + * now we have to find the matching right quote + */ + next = strchr(quote + 1, '"'); + if (next) { + quote = strchr(next + 1, '"'); + next = strchr(next + 1, ' '); + } + } + + if (!next) + next = bootargs + strlen(bootargs); + + linux_cmdline_set(bootargs, next - bootargs); + + if (*next) + next++; + + bootargs = next; + } + + linux_cmdline_dump(); +} + +static void linux_env_init(void) +{ + linux_env = (char **)(((ulong) linux_argp + 15) & ~15); + linux_env[0] = 0; + linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS); + linux_env_idx = 0; +} + +static void linux_env_set(const char *env_name, const char *env_val) +{ + if (linux_env_idx < LINUX_MAX_ENVS - 1) { + linux_env[linux_env_idx] = linux_env_p; + + strcpy(linux_env_p, env_name); + linux_env_p += strlen(env_name); + + if (mips_boot_qemu_malta) { + linux_env_p++; + linux_env[++linux_env_idx] = linux_env_p; + } else { + *linux_env_p++ = '='; + } + + strcpy(linux_env_p, env_val); + linux_env_p += strlen(env_val); + + linux_env_p++; + linux_env[++linux_env_idx] = 0; + } +} static void boot_prep_linux(bootm_headers_t *images) { - char *commandline = getenv("bootargs"); char env_buf[12]; - char *cp; - - linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); + const char *cp; + ulong rd_start, rd_size; #ifdef CONFIG_MEMSIZE_IN_BYTES sprintf(env_buf, "%lu", (ulong)gd->ram_size); @@ -41,15 +166,20 @@ static void boot_prep_linux(bootm_headers_t *images) #else sprintf(env_buf, "%lu", (ulong)(gd->ram_size >> 20)); debug("## Giving linux memsize in MB, %lu\n", - (ulong)(gd->ram_size >> 20)); + (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ + rd_start = UNCACHED_SDRAM(images->initrd_start); + rd_size = images->initrd_end - images->initrd_start; + + linux_env_init(); + linux_env_set("memsize", env_buf); - sprintf(env_buf, "0x%08X", (uint) UNCACHED_SDRAM(images->rd_start)); + sprintf(env_buf, "0x%08lX", rd_start); linux_env_set("initrd_start", env_buf); - sprintf(env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); + sprintf(env_buf, "0x%lX", rd_size); linux_env_set("initrd_size", env_buf); sprintf(env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); @@ -65,33 +195,42 @@ static void boot_prep_linux(bootm_headers_t *images) cp = getenv("eth1addr"); if (cp) linux_env_set("eth1addr", cp); + + if (mips_boot_qemu_malta) + linux_env_set("modetty0", "38400n8r"); } static void boot_jump_linux(bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; + typedef void __noreturn (*kernel_entry_t)(int, ulong, ulong, ulong); + kernel_entry_t kernel = (kernel_entry_t) images->ep; + ulong linux_extra = 0; - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); + debug("## Transferring control to Linux (at address %p) ...\n", kernel); bootstage_mark(BOOTSTAGE_ID_RUN_OS); + if (mips_boot_qemu_malta) + linux_extra = gd->ram_size; + /* we assume that the kernel is in place */ printf("\nStarting kernel ...\n\n"); - theKernel(linux_argc, linux_argv, linux_env, 0); + kernel(linux_argc, (ulong)linux_argv, (ulong)linux_env, linux_extra); } int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* No need for those on MIPS */ - if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE) + if (flag & BOOTM_STATE_OS_BD_T) return -1; + if (flag & BOOTM_STATE_OS_CMDLINE) { + boot_cmdline_linux(images); + return 0; + } + if (flag & BOOTM_STATE_OS_PREP) { boot_prep_linux(images); return 0; @@ -102,76 +241,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], return 0; } + boot_cmdline_linux(images); boot_prep_linux(images); boot_jump_linux(images); /* does not return */ return 1; } - -static void linux_params_init(ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr(line, '"'); - next = strchr(line, ' '); - - while (next && quote && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr(quote + 1, '"'); - if (next) { - quote = strchr(next + 1, '"'); - next = strchr(next + 1, ' '); - } - } - - if (!next) - next = line + strlen(line); - - linux_argv[linux_argc] = argp; - memcpy(argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; - } - - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set(char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy(linux_env_p, env_name); - linux_env_p += strlen(env_name); - - strcpy(linux_env_p, "="); - linux_env_p += 1; - - strcpy(linux_env_p, env_val); - linux_env_p += strlen(env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } -} diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c deleted file mode 100644 index 910ab73638..0000000000 --- a/arch/mips/lib/bootm_qemu_mips.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2008 - * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <image.h> -#include <asm/byteorder.h> -#include <asm/addrspace.h> - -DECLARE_GLOBAL_DATA_PTR; - -int do_bootm_linux(int flag, int argc, char * const argv[], - bootm_headers_t *images) -{ - void (*theKernel) (int, char **, char **, int *); - char *bootargs = getenv("bootargs"); - char *start; - uint len; - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; - - bootstage_mark(BOOTSTAGE_ID_RUN_OS); - - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); - - gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256; - debug("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); - - /* set Magic */ - *(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678; - /* set ram_size */ - *(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size; - - start = (char *)gd->bd->bi_boot_params; - - len = strlen(bootargs); - - strncpy(start, bootargs, len + 1); - - start += len; - - len = images->rd_end - images->rd_start; - if (len > 0) { - start += sprintf(start, " rd_start=0x%08X rd_size=0x%0X", - (uint) UNCACHED_SDRAM(images->rd_start), - (uint) len); - } - - /* we assume that the kernel is in place */ - printf("\nStarting kernel ...\n\n"); - - theKernel(0, NULL, NULL, 0); - - /* does not return */ - return 1; -} diff --git a/arch/nds32/include/asm/dma-mapping.h b/arch/nds32/include/asm/dma-mapping.h new file mode 100644 index 0000000000..25e5a1b6ec --- /dev/null +++ b/arch/nds32/include/asm/dma-mapping.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2013 Andes Technology Corporation + * Ken Kuo, Andes Technology Corporation <ken_kuo@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_NDS_DMA_MAPPING_H +#define __ASM_NDS_DMA_MAPPING_H + +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, +}; + +static void *dma_alloc_coherent(size_t len, unsigned long *handle) +{ + *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len); + return (void *)*handle; +} + +static inline unsigned long dma_map_single(volatile void *vaddr, size_t len, + enum dma_data_direction dir) +{ + return (unsigned long)vaddr; +} + +static inline void dma_unmap_single(volatile void *vaddr, size_t len, + unsigned long paddr) +{ +} + +#endif /* __ASM_NDS_DMA_MAPPING_H */ diff --git a/arch/powerpc/cpu/mpc824x/cpu.c b/arch/powerpc/cpu/mpc824x/cpu.c index ee69e495b7..eaa4e87070 100644 --- a/arch/powerpc/cpu/mpc824x/cpu.c +++ b/arch/powerpc/cpu/mpc824x/cpu.c @@ -45,12 +45,10 @@ int checkcpu (void) return -1; /* no valid CPU revision info */ } - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); - - puts ("\n"); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache\n"); return 0; } diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index 09970b0589..28c25e5feb 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -299,6 +299,8 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) printf("PCIE%d: ", bus); +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ reg16 = in_le16(hose_cfg_base + PCI_LTSSM); if (reg16 >= PCI_LTSSM_L0) printf("link\n"); diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 0d1e8f1f0a..f70f0d747d 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8568) += ddr-gen2.o COBJS-$(CONFIG_MPC8544) += ddr-gen2.o # supports ddr1/2/3 +COBJS-$(CONFIG_PPC_C29X) += ddr-gen3.o COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o COBJS-$(CONFIG_MPC8569) += ddr-gen3.o @@ -100,6 +101,7 @@ COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support +COBJS-$(CONFIG_PPC_C29X) += c29x_serdes.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 53c6a7faf9..39b8e3ecc2 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -41,8 +41,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #ifdef CONFIG_SYS_SRIO struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); #endif @@ -112,10 +112,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c new file mode 100644 index 0000000000..51972cb7cb --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c @@ -0,0 +1,62 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS1_MAX_LANES]; +}; + +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {2, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {3, {PCIE1, PCIE1, NONE, NONE} }, + {4, {PCIE1, PCIE1, NONE, NONE} }, + {5, {PCIE1, NONE, NONE, NONE} }, + {6, {PCIE1, NONE, NONE, NONE} }, + {} +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + return (1 << device) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + const struct serdes_config *ptr; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + ptr = &serdes1_cfg_tbl[srds_cfg]; + if (!ptr->protocol) + return; + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = ptr->lanes[lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 5cd02ccde6..eea264b151 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -245,6 +245,18 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 puts("Work-around for Erratum A006593 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + if (IS_SVR_REV(svr, 1, 0)) + puts("Work-around for Erratum A003571 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + puts("Work-around for Erratum A-005812 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 + if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || + (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) + puts("Work-around for Erratum I2C-A004447 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 91ac4ee617..1a0196c7c4 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -44,10 +44,10 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if (defined(CONFIG_DDR_CLK_FREQ) || \ - defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif /* CONFIG_FSL_CORENET */ +#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif /* * Cornet platforms use ddr sync bit in RCW to indicate sync vs async @@ -135,81 +135,97 @@ int checkcpu (void) if (!(i & 3)) printf ("\n "); printf("CPU%d:%-4s MHz, ", core, - strmhz(buf1, sysinfo.freqProcessor[core])); + strmhz(buf1, sysinfo.freq_processor[core])); } - printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus)); + printf("\n"); #ifdef CONFIG_FSL_CORENET if (ddr_sync == 1) { printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Synchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); } else { printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Asynchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); } #else switch (ddr_ratio) { case 0x0: printf(" DDR:%-4s MHz (%s MT/s data rate), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; case 0x7: printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Synchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; default: printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Asynchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; } #endif #if defined(CONFIG_FSL_LBC) - if (sysinfo.freqLocalBus > LCRR_CLKDIV) { - printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + if (sysinfo.freq_localbus > LCRR_CLKDIV) { + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", - sysinfo.freqLocalBus); + sysinfo.freq_localbus); } #endif #if defined(CONFIG_FSL_IFC) - printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); #endif #ifdef CONFIG_CPM2 - printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); #endif #ifdef CONFIG_QE - printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE)); + printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe)); #endif #ifdef CONFIG_SYS_DPAA_FMAN for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { printf(" FMAN%d: %s MHz\n", i + 1, - strmhz(buf1, sysinfo.freqFMan[i])); + strmhz(buf1, sysinfo.freq_fman[i])); } #endif #ifdef CONFIG_SYS_DPAA_QBMAN - printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman)); #endif #ifdef CONFIG_SYS_DPAA_PME - printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); + printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme)); #endif - puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n"); + puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n"); + +#ifdef CONFIG_FSL_CORENET + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 25beda233e..6036333eaa 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -22,6 +22,7 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include <asm/fsl_srio.h> +#include <fsl_usb.h> #include <hwconfig.h> #include <linux/compiler.h> #include "mp.h" @@ -166,7 +167,8 @@ static void enable_cpc(void) } - printf("Corenet Platform Cache: %d KB enabled\n", size); + puts("Corenet Platform Cache: "); + print_size(size * 1024, " enabled\n"); } static void invalidate_cpc(void) @@ -355,7 +357,9 @@ int cpu_init_r(void) extern int spin_table_compat; const char *spin; #endif - +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; +#endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -399,6 +403,14 @@ int cpu_init_r(void) sync(); } #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running + * in write shadow mode. Checking DCWS before setting SPR 976. + */ + if (mfspr(L1CSR2) & L1CSR2_DCWS) + mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000)); +#endif #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) spin = getenv("spin_table_compat"); @@ -448,28 +460,28 @@ int cpu_init_r(void) case 0x1: if (ver == SVR_8540 || ver == SVR_8560 || ver == SVR_8541 || ver == SVR_8555) { - puts("128 KB "); - /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ + puts("128 KiB "); + /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */ cache_ctl = 0xc4000000; } else { - puts("256 KB "); + puts("256 KiB "); cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ } break; case 0x2: if (ver == SVR_8540 || ver == SVR_8560 || ver == SVR_8541 || ver == SVR_8555) { - puts("256 KB "); - /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ + puts("256 KiB "); + /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */ cache_ctl = 0xc8000000; } else { - puts ("512 KB "); + puts("512 KiB "); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; } break; case 0x3: - puts("1024 KB "); + puts("1024 KiB "); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; break; @@ -517,13 +529,14 @@ int cpu_init_r(void) if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) { while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E)) ; - printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64); + print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n"); } skip_l2: #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) if (l2cache->l2csr0 & L2CSR0_L2E) - printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024, + " enabled\n"); enable_cluster_l2(); #else @@ -532,8 +545,16 @@ skip_l2: enable_cpc(); +#ifndef CONFIG_SYS_FSL_NO_SERDES /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 +#define MCFGR_AXIPIPE 0x000000f0 + if (IS_SVR_REV(svr, 1, 0)) + clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A005871 if (IS_SVR_REV(svr, 1, 0)) { @@ -595,7 +616,7 @@ skip_l2: #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE { - ccsr_usb_phy_t *usb_phy1 = + struct ccsr_usb_phy __iomem *usb_phy1 = (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; out_be32(&usb_phy1->usb_enable_override, CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); @@ -603,7 +624,7 @@ skip_l2: #endif #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE { - ccsr_usb_phy_t *usb_phy2 = + struct ccsr_usb_phy __iomem *usb_phy2 = (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR; out_be32(&usb_phy2->usb_enable_override, CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); @@ -625,7 +646,7 @@ skip_l2: #endif #if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) - ccsr_usb_phy_t *usb_phy = + struct ccsr_usb_phy __iomem *usb_phy = (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; setbits_be32(&usb_phy->pllprg[1], CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c index 8a86819fb5..4dd8c0b5bf 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index a705862522..542bc84acf 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -16,7 +16,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index c5b47200e0..1be51d3307 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -15,8 +15,18 @@ #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL #endif + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; @@ -54,6 +64,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } + if (step == 2) + goto step2; + if (regs->ddr_eor) out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 @@ -123,10 +136,17 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + if (regs->ddr_wrlvl_cntl_2) out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); if (regs->ddr_wrlvl_cntl_3) out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); @@ -150,6 +170,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[21], 0x24000000); #endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */ + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: /* Set, but do not enable the memory */ temp_sdram_cfg = regs->ddr_sdram_cfg; temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index cfaa2edced..533d47ab43 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob) get_sys_info(&sysinfo); #ifdef CONFIG_SYS_DPAA_FMAN ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, - sysinfo.freqFMan[0]); + sysinfo.freq_fman[0]); #if (CONFIG_SYS_NUM_FMAN == 2) ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, - sysinfo.freqFMan[1]); + sysinfo.freq_fman[1]); #endif #endif #ifdef CONFIG_SYS_DPAA_QBMAN do_fixup_by_compat_u32(blob, "fsl,qman", - "clock-frequency", sysinfo.freqQMAN, 1); + "clock-frequency", sysinfo.freq_qman, 1); #endif #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", - "clock-frequency", sysinfo.freqPME, 1); + "clock-frequency", sysinfo.freq_pme, 1); #endif } #else @@ -476,7 +476,7 @@ void fdt_fixup_fman_firmware(void *blob) if (!p) return; - fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0); + fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16); if (!fmanfw) return; @@ -604,15 +604,19 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_add_enet_stashing(blob); +#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV +#define CONFIG_FSL_TBCLK_EXTRA_DIV 1 +#endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", get_tbclk(), 1); + "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, + 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); get_sys_info(&sysinfo); off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); while (off != -FDT_ERR_NOTFOUND) { u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]); + val = cpu_to_fdt32(sysinfo.freq_processor[*reg]); fdt_setprop(blob, off, "clock-frequency", &val, 4); off = fdt_node_offset_by_prop_value(blob, off, "device_type", "cpu", 4); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index de6bd11a16..39d9409d64 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -13,8 +13,12 @@ #include <asm/errno.h> #include "fsl_corenet2_serdes.h" +#ifdef CONFIG_SYS_FSL_SRDS_1 static u64 serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 static u64 serdes2_prtcl_map; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 static u64 serdes3_prtcl_map; #endif @@ -78,8 +82,12 @@ int is_serdes_configured(enum srds_prtcl device) { u64 ret = 0; +#ifdef CONFIG_SYS_FSL_SRDS_1 ret |= (1ULL << device) & serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 ret |= (1ULL << device) & serdes2_prtcl_map; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 ret |= (1ULL << device) & serdes3_prtcl_map; #endif @@ -97,14 +105,18 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) int i; switch (sd) { +#ifdef CONFIG_SYS_FSL_SRDS_1 case FSL_SRDS_1: cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 case FSL_SRDS_2: cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; break; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 case FSL_SRDS_3: cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; @@ -163,14 +175,18 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) void fsl_serdes_init(void) { +#ifdef CONFIG_SYS_FSL_SRDS_1 serdes1_prtcl_map = serdes_init(FSL_SRDS_1, CONFIG_SYS_FSL_CORENET_SERDES_ADDR, FSL_CORENET2_RCWSR4_SRDS1_PRTCL, FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 serdes2_prtcl_map = serdes_init(FSL_SRDS_2, CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, FSL_CORENET2_RCWSR4_SRDS2_PRTCL, FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 serdes3_prtcl_map = serdes_init(FSL_SRDS_3, CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h index 6de572d594..d515b234a4 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -9,5 +9,4 @@ int is_serdes_prtcl_valid(int serdes, u32 prtcl); int serdes_lane_enabled(int lane); -enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 15bbbc15aa..c15e83b521 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -226,6 +226,21 @@ __secondary_start_page: 2: #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in + * write shadow mode. This code should run after other code setting + * DCWS. + */ + mfspr r3,L1CSR2 + andis. r3,r3,(L1CSR2_DCWS)@h + beq 1f + mfspr r3, SPRN_HDBCR0 + oris r3, r3, 0x8000 + mtspr SPRN_HDBCR0, r3 +1: +#endif + #ifdef CONFIG_BACKSIDE_L2_CACHE /* skip L2 setup on P2040/P2040E as they have no L2 */ mfspr r3,SPRN_SVR diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index f093960fe7..07690f97b1 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; /* --------------------------------------------------------------- */ -void get_sys_info (sys_info_t * sysInfo) +void get_sys_info(sys_info_t *sys_info) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #ifdef CONFIG_FSL_IFC @@ -46,7 +46,7 @@ void get_sys_info (sys_info_t * sysInfo) [14] = 3, /* CC4 PPL / 4 */ }; - const u8 core_cplx_PLL_div[16] = { + const u8 core_cplx_pll_div[16] = { [ 0] = 1, /* CC1 PPL / 1 */ [ 1] = 2, /* CC1 PPL / 2 */ [ 2] = 4, /* CC1 PPL / 4 */ @@ -60,26 +60,26 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint i, freqCC_PLL[6], rcw_tmp; + uint i, freq_cc_pll[6], rcw_tmp; uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; - sysInfo->freqSystemBus = sysclk; + sys_info->freq_systembus = sysclk; #ifdef CONFIG_DDR_CLK_FREQ - sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; #else - sysInfo->freqDDRBus = sysclk; + sys_info->freq_ddrbus = sysclk; #endif - sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; + sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) - sysInfo->freqDDRBus *= mem_pll_rat; + sys_info->freq_ddrbus *= mem_pll_rat; else - sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat; + sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat; ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f; ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; @@ -89,9 +89,9 @@ void get_sys_info (sys_info_t * sysInfo) ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; for (i = 0; i < 6; i++) { if (ratio[i] > 4) - freqCC_PLL[i] = sysclk * ratio[i]; + freq_cc_pll[i] = sysclk * ratio[i]; else - freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; + freq_cc_pll[i] = sys_info->freq_systembus * ratio[i]; } #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* @@ -110,8 +110,8 @@ void get_sys_info (sys_info_t * sysInfo) printf("Unsupported architecture configuration" " in function %s\n", __func__); cplx_pll += (cluster / 2) * 3; - sysInfo->freqProcessor[cpu] = - freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + sys_info->freq_processor[cpu] = + freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } #ifdef CONFIG_PPC_B4860 #define FM1_CLK_SEL 0xe0000000 @@ -127,63 +127,63 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { case 1: - sysInfo->freqPME = freqCC_PLL[0]; + sys_info->freq_pme = freq_cc_pll[0]; break; case 2: - sysInfo->freqPME = freqCC_PLL[0] / 2; + sys_info->freq_pme = freq_cc_pll[0] / 2; break; case 3: - sysInfo->freqPME = freqCC_PLL[0] / 3; + sys_info->freq_pme = freq_cc_pll[0] / 3; break; case 4: - sysInfo->freqPME = freqCC_PLL[0] / 4; + sys_info->freq_pme = freq_cc_pll[0] / 4; break; case 6: - sysInfo->freqPME = freqCC_PLL[1] / 2; + sys_info->freq_pme = freq_cc_pll[1] / 2; break; case 7: - sysInfo->freqPME = freqCC_PLL[1] / 3; + sys_info->freq_pme = freq_cc_pll[1] / 3; break; default: printf("Error: Unknown PME clock select!\n"); case 0: - sysInfo->freqPME = sysInfo->freqSystemBus / 2; + sys_info->freq_pme = sys_info->freq_systembus / 2; break; } #endif #ifdef CONFIG_SYS_DPAA_QBMAN - sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; + sys_info->freq_qman = sys_info->freq_systembus / 2; #endif #ifdef CONFIG_SYS_DPAA_FMAN switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { case 1: - sysInfo->freqFMan[0] = freqCC_PLL[3]; + sys_info->freq_fman[0] = freq_cc_pll[3]; break; case 2: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + sys_info->freq_fman[0] = freq_cc_pll[3] / 2; break; case 3: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + sys_info->freq_fman[0] = freq_cc_pll[3] / 3; break; case 4: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + sys_info->freq_fman[0] = freq_cc_pll[3] / 4; break; case 5: - sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + sys_info->freq_fman[0] = sys_info->freq_systembus; break; case 6: - sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + sys_info->freq_fman[0] = freq_cc_pll[4] / 2; break; case 7: - sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + sys_info->freq_fman[0] = freq_cc_pll[4] / 3; break; default: printf("Error: Unknown FMan1 clock select!\n"); case 0: - sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[0] = sys_info->freq_systembus / 2; break; } #if (CONFIG_SYS_NUM_FMAN) == 2 @@ -192,27 +192,27 @@ void get_sys_info (sys_info_t * sysInfo) rcw_tmp = in_be32(&gur->rcwsr[15]); switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { case 1: - sysInfo->freqFMan[1] = freqCC_PLL[4]; + sys_info->freq_fman[1] = freq_cc_pll[4]; break; case 2: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + sys_info->freq_fman[1] = freq_cc_pll[4] / 2; break; case 3: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + sys_info->freq_fman[1] = freq_cc_pll[4] / 3; break; case 4: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + sys_info->freq_fman[1] = freq_cc_pll[4] / 4; break; case 6: - sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + sys_info->freq_fman[1] = freq_cc_pll[3] / 2; break; case 7: - sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + sys_info->freq_fman[1] = freq_cc_pll[3] / 3; break; default: printf("Error: Unknown FMan2 clock select!\n"); case 0: - sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[1] = sys_info->freq_systembus / 2; break; } #endif /* CONFIG_SYS_NUM_FMAN == 2 */ @@ -225,8 +225,8 @@ void get_sys_info (sys_info_t * sysInfo) & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; - sysInfo->freqProcessor[cpu] = - freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + sys_info->freq_processor[cpu] = + freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 @@ -246,43 +246,43 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME if (rcw_tmp & PME_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqPME = sysInfo->freqSystemBus / 2; + sys_info->freq_pme = sys_info->freq_systembus / 2; } #endif #ifdef CONFIG_SYS_DPAA_FMAN if (rcw_tmp & FM1_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[0] = sys_info->freq_systembus / 2; } #if (CONFIG_SYS_NUM_FMAN) == 2 if (rcw_tmp & FM2_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[1] = sys_info->freq_systembus / 2; } #endif #endif #ifdef CONFIG_SYS_DPAA_QBMAN - sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; + sys_info->freq_qman = sys_info->freq_systembus / 2; #endif #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #else /* CONFIG_FSL_CORENET */ - uint plat_ratio, e500_ratio, half_freqSystemBus; + uint plat_ratio, e500_ratio, half_freq_systembus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -290,40 +290,40 @@ void get_sys_info (sys_info_t * sysInfo) plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ - half_freqSystemBus = sysInfo->freqSystemBus/2; + half_freq_systembus = sys_info->freq_systembus/2; for (i = 0; i < cpu_numcores(); i++) { e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f; - sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus; + sys_info->freq_processor[i] = e500_ratio * half_freq_systembus; } - /* Note: freqDDRBus is the MCLK frequency, not the data rate. */ - sysInfo->freqDDRBus = sysInfo->freqSystemBus; + /* Note: freq_ddrbus is the MCLK frequency, not the data rate. */ + sys_info->freq_ddrbus = sys_info->freq_systembus; #ifdef CONFIG_DDR_CLK_FREQ { u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; if (ddr_ratio != 0x7) - sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif #ifdef CONFIG_QE #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) - sysInfo->freqQE = sysInfo->freqSystemBus; + sys_info->freq_qe = sys_info->freq_systembus; #else qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; - sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif #endif #ifdef CONFIG_SYS_DPAA_FMAN - sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + sys_info->freq_fman[0] = sys_info->freq_systembus; #endif #endif /* CONFIG_FSL_CORENET */ @@ -350,10 +350,10 @@ void get_sys_info (sys_info_t * sysInfo) */ lcrr_div *= 2; #endif - sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div; } else { /* In case anyone cares what the unknown value is */ - sysInfo->freqLocalBus = lcrr_div; + sys_info->freq_localbus = lcrr_div; } #endif @@ -361,7 +361,7 @@ void get_sys_info (sys_info_t * sysInfo) ccr = in_be32(&ifc_regs->ifc_ccr); ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; - sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; + sys_info->freq_localbus = sys_info->freq_systembus / ccr; #endif } @@ -382,13 +382,13 @@ int get_clocks (void) dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; #endif get_sys_info (&sys_info); - gd->cpu_clk = sys_info.freqProcessor[0]; - gd->bus_clk = sys_info.freqSystemBus; - gd->mem_clk = sys_info.freqDDRBus; - gd->arch.lbc_clk = sys_info.freqLocalBus; + gd->cpu_clk = sys_info.freq_processor[0]; + gd->bus_clk = sys_info.freq_systembus; + gd->mem_clk = sys_info.freq_ddrbus; + gd->arch.lbc_clk = sys_info.freq_localbus; #ifdef CONFIG_QE - gd->arch.qe_clk = sys_info.freqQE; + gd->arch.qe_clk = sys_info.freq_qe; gd->arch.brg_clk = gd->arch.qe_clk / 2; #endif /* @@ -400,7 +400,7 @@ int get_clocks (void) */ #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) - gd->arch.i2c1_clk = sys_info.freqSystemBus; + gd->arch.i2c1_clk = sys_info.freq_systembus; #elif defined(CONFIG_MPC8544) /* * On the 8544, the I2C clock is the same as the SEC clock. This can be @@ -410,12 +410,12 @@ int get_clocks (void) * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544. */ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG) - gd->arch.i2c1_clk = sys_info.freqSystemBus / 3; + gd->arch.i2c1_clk = sys_info.freq_systembus / 3; else - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #else /* Most 85xx SOCs use CCB/2, so this is the default behavior. */ - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #endif gd->arch.i2c2_clk = gd->arch.i2c1_clk; @@ -429,7 +429,7 @@ int get_clocks (void) #endif /* defined(CONFIG_FSL_ESDHC) */ #if defined(CONFIG_CPM2) - gd->arch.vco_out = 2*sys_info.freqSystemBus; + gd->arch.vco_out = 2*sys_info.freq_systembus; gd->arch.cpm_clk = gd->arch.vco_out / 2; gd->arch.scc_clk = gd->arch.vco_out / 4; gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1))); diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index cfc3a60d2f..ad57a9cfa7 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -33,7 +33,8 @@ #define MINIMAL_SPL #endif -#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && \ + !defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define NOR_BOOT #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index e173cb5f95..54c1cfd2c1 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -65,8 +65,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #endif struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); @@ -159,10 +159,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index ed88602c31..ff55e3c357 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -106,25 +106,25 @@ static const struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, {38, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM2_MAC10, XFI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index da3c345d6f..8748ecd144 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -39,7 +39,8 @@ void init_tlbs(void) return ; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 08188d75e5..85ec74ba94 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -44,6 +44,11 @@ SECTIONS } _edata = .; + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + . = ALIGN(8); __init_begin = .; __init_end = .; diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index d6b28dd077..30518544dd 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -72,21 +72,21 @@ checkcpu(void) get_sys_info(&sysinfo); puts("Clock Configuration:\n"); - printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor)); - printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freq_processor)); + printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); printf(" DDR:%-4s MHz (%s MT/s data rate), ", - strmhz(buf1, sysinfo.freqSystemBus / 2), - strmhz(buf2, sysinfo.freqSystemBus)); + strmhz(buf1, sysinfo.freq_systembus / 2), + strmhz(buf2, sysinfo.freq_systembus)); - if (sysinfo.freqLocalBus > LCRR_CLKDIV) { - printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + if (sysinfo.freq_localbus > LCRR_CLKDIV) { + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", - sysinfo.freqLocalBus); + sysinfo.freq_localbus); } - puts("L1: D-cache 32 KB enabled\n"); - puts(" I-cache 32 KB enabled\n"); + puts("L1: D-cache 32 KiB enabled\n"); + puts(" I-cache 32 KiB enabled\n"); puts("L2: "); if (get_l2cr() & 0x80000000) { @@ -95,7 +95,7 @@ checkcpu(void) #elif defined(CONFIG_MPC8641) puts("512"); #endif - puts(" KB enabled\n"); + puts(" KiB enabled\n"); } else { puts("Disabled\n"); } @@ -131,7 +131,7 @@ get_tbclk(void) sys_info_t sys_info; get_sys_info(&sys_info); - return (sys_info.freqSystemBus + 3L) / 4L; + return (sys_info.freq_systembus + 3L) / 4L; } diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c index 92ba26dc8e..33a91f9f78 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr; diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index ea366ab9e4..854d02b5c4 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; /* used in some defintiions of CONFIG_SYS_CLK_FREQ */ extern unsigned long get_board_sys_clk(unsigned long dummy); -void get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -31,7 +31,7 @@ void get_sys_info(sys_info_t *sysInfo) switch (plat_ratio) { case 0x0: - sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ; break; case 0x02: case 0x03: @@ -43,10 +43,10 @@ void get_sys_info(sys_info_t *sysInfo) case 0x0a: case 0x0c: case 0x10: - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; break; default: - sysInfo->freqSystemBus = 0; + sys_info->freq_systembus = 0; break; } @@ -55,25 +55,26 @@ void get_sys_info(sys_info_t *sysInfo) switch (e600_ratio) { case 0x10: - sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus; + sys_info->freq_processor = 2 * sys_info->freq_systembus; break; case 0x19: - sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 5 * sys_info->freq_systembus / 2; break; case 0x20: - sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; + sys_info->freq_processor = 3 * sys_info->freq_systembus; break; case 0x39: - sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 7 * sys_info->freq_systembus / 2; break; case 0x28: - sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus; + sys_info->freq_processor = 4 * sys_info->freq_systembus; break; case 0x1d: - sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 9 * sys_info->freq_systembus / 2; break; default: - sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; + sys_info->freq_processor = e600_ratio + + sys_info->freq_systembus; break; } @@ -84,10 +85,11 @@ void get_sys_info(sys_info_t *sysInfo) lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { - sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + sys_info->freq_localbus = sys_info->freq_systembus + / (lcrr_div * 2); } else { /* In case anyone cares what the unknown value is */ - sysInfo->freqLocalBus = lcrr_div; + sys_info->freq_localbus = lcrr_div; } } @@ -102,9 +104,9 @@ int get_clocks(void) sys_info_t sys_info; get_sys_info(&sys_info); - gd->cpu_clk = sys_info.freqProcessor; - gd->bus_clk = sys_info.freqSystemBus; - gd->arch.lbc_clk = sys_info.freqLocalBus; + gd->cpu_clk = sys_info.freq_processor; + gd->bus_clk = sys_info.freq_systembus; + gd->arch.lbc_clk = sys_info.freq_localbus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, @@ -114,9 +116,9 @@ int get_clocks(void) * AN2919. */ #ifdef CONFIG_MPC8610 - gd->arch.i2c1_clk = sys_info.freqSystemBus; + gd->arch.i2c1_clk = sys_info.freq_systembus; #else - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #endif gd->arch.i2c2_clk = gd->arch.i2c1_clk; @@ -138,7 +140,7 @@ ulong get_bus_freq(ulong dummy) sys_info_t sys_info; get_sys_info(&sys_info); - val = sys_info.freqSystemBus; + val = sys_info.freq_systembus; return val; } diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c index 1550045e6c..5c96b5fe16 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu.c +++ b/arch/powerpc/cpu/mpc8xx/cpu.c @@ -136,10 +136,8 @@ static int check_CPU (long clock, uint pvr, uint immr) #else printf (" at %s MHz: ", strmhz (buf, clock)); #endif - printf ("%u kB I-Cache %u kB D-Cache", - checkicache () >> 10, - checkdcache () >> 10 - ); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* do we have a FEC (860T/P or 852/859/866/885)? */ @@ -204,10 +202,10 @@ static int check_CPU (long clock, uint pvr, uint immr) printf ("unknown MPC857 (0x%08x)", k); #endif - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 862T (or P?) */ @@ -265,10 +263,10 @@ static int check_CPU (long clock, uint pvr, uint immr) if (suf) printf ("PPC823ZTnn%s", suf); - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 860T (or P?) */ @@ -321,10 +319,10 @@ static int check_CPU (long clock, uint pvr, uint immr) default: printf ("unknown MPC850 (0x%08x)", k); } - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 850T (or P?) */ diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c index 02cd0debc2..fc351585be 100644 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ b/arch/powerpc/cpu/mpc8xx/video.c @@ -109,7 +109,6 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> #ifdef CONFIG_VIDEO_LOGO #include <video_logo.h> /* Get logo data, width and height */ @@ -1177,7 +1176,7 @@ static void *video_logo (void) #ifndef CONFIG_FADS /* all normal boards */ /* leave one blank line */ - sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash", + sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash", strmhz(temp, gd->cpu_clk), gd->ram_size >> 20, gd->bd->bi_flashsize >> 20 ); @@ -1188,7 +1187,7 @@ static void *video_logo (void) video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT, info); - sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM"); + sprintf(info, "2MiB FLASH - 8MiB DRAM - 4MiB SRAM"); video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2, info); #endif diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 7369582ef1..c67be4ef29 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -79,6 +79,9 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), CPU_TYPE_ENTRY(BSC9232, 9232, 2), + CPU_TYPE_ENTRY(C291, C291, 1), + CPU_TYPE_ENTRY(C292, C292, 1), + CPU_TYPE_ENTRY(C293, C293, 1), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index ff5812df55..242eb47ac3 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -364,7 +364,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ddr->timing_cfg_3 = (0 | ((ext_pretoact & 0x1) << 28) - | ((ext_acttopre & 0x2) << 24) + | ((ext_acttopre & 0x3) << 24) | ((ext_acttorw & 0x1) << 22) | ((ext_refrec & 0x1F) << 16) | ((ext_caslat & 0x3) << 12) @@ -681,6 +681,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ unsigned int slow = 0; /* DDR will be run less than 1250 */ + unsigned int x4_en = 0; /* x4 DRAM enable */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -725,6 +726,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, ap_en = 0; } + x4_en = popts->x4_en ? 1 : 0; + #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Use the DDR controller to auto initialize memory. */ d_init = popts->ECC_init_using_memctl; @@ -747,6 +750,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) | ((slow & 1) << 11) + | (x4_en << 10) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1585,8 +1589,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, | ((ea & 0xFFF) << 0) /* ending address MSB */ ); } else { - debug("FSLDDR: setting bnds to 0 for inactive CS\n"); - ddr->cs[i].bnds = 0; + /* setting bnds to 0xffffffff for inactive CS */ + ddr->cs[i].bnds = 0xffffffff; } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); @@ -1638,5 +1642,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_rcw(ddr, popts, common_dimm); +#ifdef CONFIG_SYS_FSL_DDR_EMU + /* disble DDR training for emulator */ + ddr->debug[2] = 0x00000400; + ddr->debug[4] = 0xff800000; +#endif return check_fsl_memctl_config_regs(ddr); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index 4dd55fc4c3..c173a5a74b 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -96,7 +96,7 @@ unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr); /* processor specific function */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); /* board specific function */ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 3e7c269e40..b67158c0ff 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -129,6 +129,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->ec_sdram_width = 0; pdimm->data_width = pdimm->primary_sdram_width + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); /* These are the types defined by the JEDEC DDR3 SPD spec */ pdimm->mirrored_dimm = 0; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index 1ed6c77150..260fce577f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -205,6 +205,7 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -263,6 +264,7 @@ static void print_dimm_parameters(const dimm_params_t *pdimm) DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -443,6 +445,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(twoT_en), CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), @@ -687,6 +690,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(registered_dimm_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index e958e138dd..56128a7b96 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -218,12 +218,16 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; +#ifndef CONFIG_SPL_BUILD printf("Detected RDIMM %s\n", dimm_params[i].mpart); +#endif } else { temp2 = 1; +#ifndef CONFIG_SPL_BUILD printf("Detected UDIMM %s\n", dimm_params[i].mpart); +#endif } } } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 7a8636de16..842bf1989e 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -25,10 +25,6 @@ void fsl_ddr_set_lawbar( unsigned int ctrl_num); void fsl_ddr_set_intl3r(const unsigned int granule_size); -/* processor specific function */ -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - #if defined(SPD_EEPROM_ADDRESS) || \ defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) @@ -365,9 +361,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, { unsigned int i, j; unsigned long long total_mem = 0; + int assert_reset; fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; common_timing_params_t *timing_params = pinfo->common_timing_params; + assert_reset = board_need_mem_reset(); /* data bus width capacity adjust shift amount */ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS]; @@ -462,7 +460,20 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, timing_params[i].all_DIMMs_registered, &pinfo->memctl_opts[i], pinfo->dimm_params[i], i); + /* + * For RDIMMs, JEDEC spec requires clocks to be stable + * before reset signal is deasserted. For the boards + * using fixed parameters, this function should be + * be called from board init file. + */ + if (timing_params[i].all_DIMMs_registered) + assert_reset = 1; } + if (assert_reset) { + debug("Asserting mem reset\n"); + board_assert_mem_reset(); + } + case STEP_ASSIGN_ADDRESSES: /* STEP 5: Assign addresses to chip selects */ check_interleaving_options(pinfo); @@ -504,7 +515,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; if (reg->cs[j].config & 0x80000000) { unsigned int end; - end = reg->cs[j].bnds & 0xFFF; + /* + * 0xfffffff is a special value we put + * for unused bnds + */ + if (reg->cs[j].bnds == 0xffffffff) + continue; + end = reg->cs[j].bnds & 0xffff; if (end > max_end) { max_end = end; } @@ -531,6 +548,7 @@ phys_size_t fsl_ddr_sdram(void) unsigned int law_memctl = LAW_TRGT_IF_DDR_1; unsigned long long total_memory; fsl_ddr_info_t info; + int deassert_reset; /* Reset info structure. */ memset(&info, 0, sizeof(fsl_ddr_info_t)); @@ -559,7 +577,21 @@ phys_size_t fsl_ddr_sdram(void) } } - /* Program configuration registers. */ + /* + * Program configuration registers. + * JEDEC specs requires clocks to be stable before deasserting reset + * for RDIMMs. Clocks start after chip select is enabled and clock + * control register is set. During step 1, all controllers have their + * registers set but not enabled. Step 2 proceeds after deasserting + * reset through board FPGA or GPIO. + * For non-registered DIMMs, initialization can go through but it is + * also OK to follow the same flow. + */ + deassert_reset = board_need_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (info.common_timing_params[i].all_DIMMs_registered) + deassert_reset = 1; + } for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); if (info.common_timing_params[i].ndimms_present == 0) { @@ -567,8 +599,22 @@ phys_size_t fsl_ddr_sdram(void) "skipping programming\n", i); continue; } - - fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i); + /* + * The following call with step = 1 returns before enabling + * the controller. It has to finish with step = 2 later. + */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i, + deassert_reset ? 1 : 0); + } + if (deassert_reset) { + /* Use board FPGA or GPIO to deassert reset signal */ + debug("Deasserting mem reset\n"); + board_deassert_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + /* Call with step = 2 to continue initialization */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), + i, 2); + } } /* program LAWs */ @@ -637,7 +683,8 @@ phys_size_t fsl_ddr_sdram(void) #if !defined(CONFIG_PHYS_64BIT) /* Check for 4G or more. Bad. */ if (total_memory >= (1ull << 32)) { - printf("Detected %lld MB of memory\n", total_memory >> 20); + puts("Detected "); + print_size(total_memory, " of memory\n"); printf(" This U-Boot only supports < 4G of DDR\n"); printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); printf(" "); /* re-align to match init_func_ram print */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 26369e0996..30cdca497e 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -700,6 +700,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } #endif + popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; + /* Choose burst length. */ #if defined(CONFIG_FSL_DDR3) #if defined(CONFIG_E500MC) diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 89966e0d2f..eb7cbbce7e 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -121,11 +121,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) { const char *modes[] = { "host", "peripheral", "otg" }; const char *phys[] = { "ulpi", "utmi" }; - const char *mode = NULL; - const char *phy_type = NULL; const char *dr_mode_type = NULL; const char *dr_phy_type = NULL; - char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; @@ -159,12 +156,6 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) dr_mode_type = modes[mode_idx]; dr_phy_type = phys[phy_idx]; - /* use usb_dr_mode and usb_phy_type if - usb1_defined = 0; these variables are to - be deprecated */ - if (!strcmp(str, "usb1")) - usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); return; @@ -183,19 +174,6 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) if (usb_phy_off < 0) return; } - - if (!usb1_defined) { - int usb_off = -1; - mode = getenv("usb_dr_mode"); - phy_type = getenv("usb_phy_type"); - if (mode || phy_type) { - printf("WARNING: usb_dr_mode and usb_phy_type " - "are to be deprecated soon. Use " - "hwconfig to set these values instead!!\n"); - fdt_fixup_usb_mode_phy_type(blob, mode, - phy_type, usb_off); - } - } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c index 89a561e0ac..a401083107 100644 --- a/arch/powerpc/cpu/mpc8xxx/law.c +++ b/arch/powerpc/cpu/mpc8xxx/law.c @@ -76,7 +76,8 @@ void disable_law(u8 idx) return; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) static int get_law_entry(u8 i, struct law_entry *e) { u32 lawar; @@ -106,7 +107,8 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) return idx; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c index 2ca355b134..5584e0f3e8 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c @@ -1,26 +1,5 @@ -/*-----------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public license version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs * * File Name: 405gp_pci.c * diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c index 1ad19abff6..50c28a0d39 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c @@ -5,30 +5,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ #include <common.h> @@ -40,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) @@ -91,7 +68,7 @@ DECLARE_GLOBAL_DATA_PTR; #define UDIV_SUBTRACT 0 #define UART0_SDR SDR0_UART0 #define UART1_SDR SDR0_UART1 -#else /* CONFIG_405GP || CONFIG_405CR */ +#else /* CONFIG_405GP */ #define CR0_MASK 0x00001fff #define CR0_EXTCLK_ENA 0x000000c0 #define CR0_UDIV_POS 1 @@ -196,7 +173,7 @@ int get_serial_clock(void) * Let's handle this in some #ifdef's for the SoC's. */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) +#if defined(CONFIG_405GP) reg = mfdcr(CPC0_CR0) & ~CR0_MASK; #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK clk = CONFIG_SYS_EXT_SERIAL_CLOCK; @@ -223,7 +200,7 @@ int get_serial_clock(void) #else clk = CONFIG_SYS_BASE_BAUD * 16; #endif -#endif /* CONFIG_405CR */ +#endif #if defined(CONFIG_405EP) { @@ -288,4 +265,4 @@ int get_serial_clock(void) return clk; } -#endif /* CONFIG_405GP || CONFIG_405CR */ +#endif /* CONFIG_405GP */ diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c index fe050985e5..d1fc7f3fc2 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu.c +++ b/arch/powerpc/cpu/ppc4xx/cpu.c @@ -320,25 +320,9 @@ int checkcpu (void) puts("405GP Rev. D"); break; -#ifdef CONFIG_405GP - case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */ + case PVR_405GP_RE: puts("405GP Rev. E"); break; -#endif - - case PVR_405CR_RA: - puts("405CR Rev. A"); - break; - - case PVR_405CR_RB: - puts("405CR Rev. B"); - break; - -#ifdef CONFIG_405CR - case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */ - puts("405CR Rev. C"); - break; -#endif case PVR_405GPR_RB: puts("405GPr Rev. B"); @@ -647,12 +631,12 @@ int checkcpu (void) #endif #if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) - printf (" 16 kB I-Cache 16 kB D-Cache"); + printf(" 16 KiB I-Cache 16 KiB D-Cache"); #elif defined(CONFIG_440) - printf (" 32 kB I-Cache 32 kB D-Cache"); + printf(" 32 KiB I-Cache 32 KiB D-Cache"); #else - printf (" 16 kB I-Cache %d kB D-Cache", - ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); + printf(" 16 KiB I-Cache %d KiB D-Cache", + ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); #endif #endif /* !defined(CONFIG_405) */ diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index d53d882511..d465dcda8b 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -326,7 +326,7 @@ cpu_init_f (void) * External Bus Controller (EBC) Setup */ #if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) -#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if (defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405)) /* diff --git a/arch/powerpc/cpu/ppc4xx/miiphy.c b/arch/powerpc/cpu/ppc4xx/miiphy.c index 297155fdaf..e4a9db6767 100644 --- a/arch/powerpc/cpu/ppc4xx/miiphy.c +++ b/arch/powerpc/cpu/ppc4xx/miiphy.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - | This source code is dual-licensed. You may use it under the terms of the - | GNU General Public License version 2, or under the license below. - | - | This source code has been made available to you by IBM on an AS-IS - | basis. Anyone receiving this source is licensed under IBM - | copyrights to use it in any way he or she deems fit, including - | copying it, modifying it, compiling it, and redistributing it either - | with or without modifications. No license under IBM patents or - | patent applications is to be implied by the copyright license. - | - | Any user of this software should understand that IBM cannot provide - | technical support for this software and will not be responsible for - | any consequences resulting from the use of this software. - | - | Any person who transfers this source code or any derivative work - | must include the IBM copyright notice, this paragraph, and the - | preceding two paragraphs in the transferred software. - | - | COPYRIGHT I B M CORPORATION 1995 - | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - +-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ | | File Name: miiphy.c diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c index 3345e73347..7e077d5a9f 100644 --- a/arch/powerpc/cpu/ppc4xx/speed.c +++ b/arch/powerpc/cpu/ppc4xx/speed.c @@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) +#if defined(CONFIG_405GP) void get_sys_info (PPC4xx_SYS_INFO * sysInfo) { @@ -1184,7 +1184,7 @@ ulong get_bus_freq (ulong dummy) { ulong val; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) || \ defined(CONFIG_440) diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 57ae1d3820..d9d8cbffaa 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -6,46 +6,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *------------------------------------------------------------------------------- + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ /* @@ -833,7 +794,7 @@ _start: #endif /* CONFIG_440 */ /*****************************************************************************/ -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) /*----------------------------------------------------------------------- */ @@ -1103,7 +1064,7 @@ _start: #endif /* CONFIG_NAND_SPL */ -#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ +#endif /* CONFIG_405GP || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7ed93acdcf..15e44de41e 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -67,6 +67,8 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x00 #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 @@ -131,7 +133,10 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549 +#define CONFIG_SYS_FSL_ERRATUM_SEC_A003571 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x10 /* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) @@ -249,6 +254,8 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 /* P1024 is lower end variant of P1020 */ #elif defined(CONFIG_P1024) @@ -303,6 +310,7 @@ #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -333,9 +341,12 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -366,9 +377,13 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_A005812 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -410,10 +425,14 @@ #define CONFIG_SYS_FSL_ERRATUM_A004849 #define CONFIG_SYS_FSL_ERRATUM_A004580 #define CONFIG_SYS_P4080_ERRATUM_PCIE_A003 +#define CONFIG_SYS_FSL_ERRATUM_A005812 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -440,10 +459,13 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P5040) #define CONFIG_SYS_PPC64 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -469,6 +491,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -492,12 +515,18 @@ #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000 +#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 +#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 +#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define CONFIG_E6500 @@ -523,6 +552,8 @@ #endif #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SRDS_3 #define CONFIG_SYS_FSL_SRDS_4 #define CONFIG_SYS_FSL_SEC_COMPAT 4 @@ -536,6 +567,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 @@ -552,6 +584,8 @@ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 @@ -576,6 +610,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #else #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2 @@ -612,6 +647,18 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_C29X) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_TSECV2_1 +#define CONFIG_SYS_FSL_SEC_COMPAT 6 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h index ffe4db8b8a..bd312ad5c5 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h @@ -26,6 +26,7 @@ typedef struct dimm_params_s { unsigned int primary_sdram_width; unsigned int ec_sdram_width; unsigned int registered_dimm; + unsigned int device_width; /* x4, x8, x16 components */ /* SDRAM device parameters */ unsigned int n_row_addr; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 640d3297d6..f4eec82d5d 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -277,6 +277,7 @@ typedef struct memctl_options_s { unsigned int mirrored_dimm; unsigned int quad_rank_present; unsigned int ap_en; /* address parity enable for RDIMM */ + unsigned int x4_en; /* enable x4 devices */ /* Global Timing Parameters */ unsigned int cas_latency_override; @@ -330,9 +331,31 @@ extern phys_size_t fsl_ddr_sdram(void); extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +static void __board_assert_mem_reset(void) +{ +} + +static void __board_deassert_mem_reset(void) +{ +} + +void board_assert_mem_reset(void) + __attribute__((weak, alias("__board_assert_mem_reset"))); + +void board_deassert_mem_reset(void) + __attribute__((weak, alias("__board_deassert_mem_reset"))); + +static int __board_need_mem_reset(void) +{ + return 0; +} + +int board_need_mem_reset(void) + __attribute__((weak, alias("__board_need_mem_reset"))); + /* * The 85xx boards have a common prototype for fixed_sdram so put the * declaration here. diff --git a/arch/powerpc/include/asm/fsl_i2c.h b/arch/powerpc/include/asm/fsl_i2c.h index 4f71341327..d6537fd633 100644 --- a/arch/powerpc/include/asm/fsl_i2c.h +++ b/arch/powerpc/include/asm/fsl_i2c.h @@ -54,6 +54,7 @@ typedef struct fsl_i2c { #define I2C_CR_MTX 0x10 #define I2C_CR_TXAK 0x08 #define I2C_CR_RSTA 0x04 +#define I2C_CR_BIT6 0x02 /* required for workaround A004447 */ #define I2C_CR_BCST 0x01 u8 sr; /* I2C status register */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index bea1636768..37d3a22461 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -82,7 +82,7 @@ enum law_trgt_if { #ifndef CONFIG_MPC8641 LAW_TRGT_IF_PCIE_1 = 0x02, #endif -#if defined(CONFIG_BSC9131) +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) LAW_TRGT_IF_OCN_DSP = 0x03, #else #if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020) @@ -92,9 +92,14 @@ enum law_trgt_if { LAW_TRGT_IF_LBC = 0x04, LAW_TRGT_IF_CCSR = 0x08, LAW_TRGT_IF_DSP_CCSR = 0x09, + LAW_TRGT_IF_PLATFORM_SRAM = 0x0a, LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, +#if defined(CONFIG_BSC9132) + LAW_TRGT_IF_CLASS_DSP = 0x0d, +#else LAW_TRGT_IF_RIO_2 = 0x0d, +#endif LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 3f543d9249..44bc88dcec 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -29,6 +29,13 @@ struct srio_liodn_id_table { + CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ } +#define SET_SRIO_LIODN_BASE(port, id_a) \ + { .id = { id_a }, .num_ids = 1, .portid = port, \ + .reg_offset[0] = offsetof(struct ccsr_rio, liodn) \ + + (port - 1) * 0x200 \ + + CONFIG_SYS_FSL_SRIO_ADDR, \ + } + struct liodn_id_table { const char * compat; u32 id[2]; diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index c740da37ce..749411c101 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2012 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -13,6 +13,34 @@ #define PEX_IP_BLK_REV_2_2 0x02080202 #define PEX_IP_BLK_REV_2_3 0x02080203 +#define PEX_IP_BLK_REV_3_0 0x02080300 + +/* Freescale-specific PCI config registers */ +#define FSL_PCI_PBFR 0x44 + +#ifdef CONFIG_SYS_FSL_PCI_VER_3_X +/* Currently only the PCIe capability is used, so hardcode the offset. + * if more capabilities need to be justified, the capability link method + * should be applied here + */ +#define FSL_PCIE_CAP_ID 0x70 +#define PCI_DCR 0x78 /* PCIe Device Control Register */ +#define PCI_DSR 0x7a /* PCIe Device Status Register */ +#define PCI_LSR 0x82 /* PCIe Link Status Register */ +#define PCI_LCR 0x80 /* PCIe Link Control Register */ +#else +#define FSL_PCIE_CAP_ID 0x4c +#define PCI_DCR 0x54 /* PCIe Device Control Register */ +#define PCI_DSR 0x56 /* PCIe Device Status Register */ +#define PCI_LSR 0x5e /* PCIe Link Status Register */ +#define PCI_LCR 0x5c /* PCIe Link Control Register */ +#endif + +#define FSL_PCIE_CFG_RDY 0x4b0 +#define FSL_PROG_IF_AGENT 0x1 + +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); @@ -149,7 +177,10 @@ typedef struct ccsr_pci { u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */ char res23[200]; u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ - char res24[252]; + char res24[16]; + u32 pex_csr0; /* 0xf14 - PEX Control/Status register 0*/ + u32 pex_csr1; /* 0xf18 - PEX Control/Status register 1*/ + char res25[228]; } ccsr_fsl_pci_t; #define PCIE_CONFIG_PC 0x00020000 #define PCIE_CONFIG_OB_CK 0x00002000 diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 59189adb39..1106d28058 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -90,6 +90,7 @@ void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #else int serdes_get_first_lane(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 81b3322fe6..3a10d778f1 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1544,6 +1544,18 @@ struct rio_pw { }; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN +struct rio_liodn { + u32 plbr; + u8 res0[28]; + u32 plaor; + u8 res1[12]; + u32 pludr; + u32 plldr; + u8 res2[456]; +}; +#endif + /* RapidIO Registers */ struct ccsr_rio { struct rio_arch arch; @@ -1566,6 +1578,10 @@ struct ccsr_rio { u8 res7[100]; struct rio_pw pw; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN + u8 res5[8192]; + struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +#endif }; #endif @@ -2131,6 +2147,11 @@ typedef struct ccsr_gur { #ifdef CONFIG_MPC8536 #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 +#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \ + & MPC85xx_PORDEVSR2_DDR_SPD_0) \ + >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT)) #else #if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 @@ -2178,6 +2199,9 @@ typedef struct ccsr_gur { #elif defined(CONFIG_BSC9132) #define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2193,6 +2217,10 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 u32 pordbgmsr; /* POR debug mode status */ u32 pordevsr2; /* POR I/O device status 2 */ +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008 +#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3 +#endif /* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 u8 res1[8]; @@ -2339,6 +2367,11 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 #define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 #endif +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PMUXCR_SPI_MASK 0x00000300 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2526,7 +2559,9 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SWRST 0x10000000 -#define SRDS_RSTCTL_SDPD 0x00000020 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 u32 pllcr0; /* PLL Control Register 0 */ #define SRDS_PLLCR0_POFF 0x80000000 #define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 @@ -2811,54 +2846,6 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; -#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -struct ccsr_usb_port_ctrl { - u32 ctrl; - u32 drvvbuscfg; - u32 pwrfltcfg; - u32 sts; - u8 res_14[0xc]; - u32 bistcfg; - u32 biststs; - u32 abistcfg; - u32 abiststs; - u8 res_30[0x10]; - u32 xcvrprg; - u32 anaprg; - u32 anadrv; - u32 anasts; -}; - -typedef struct ccsr_usb_phy { - u32 id; - struct ccsr_usb_port_ctrl port1; - u8 res_50[0xc]; - u32 tvr; - u32 pllprg[4]; - u8 res_70[0x4]; - u32 anaccfg; - u32 dbg; - u8 res_7c[0x4]; - struct ccsr_usb_port_ctrl port2; - u8 res_dc[0x334]; -} ccsr_usb_phy_t; - -#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) -#else -typedef struct ccsr_usb_phy { - u8 res0[0x18]; - u32 usb_enable_override; - u8 res[0xe4]; -} ccsr_usb_phy_t; -#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 -#endif - #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { u8 res0[0x543]; @@ -3008,12 +2995,18 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#elif defined(CONFIG_TSECV2_1) +#define CONFIG_SYS_TSEC1_OFFSET 0x10000 #else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#if defined(CONFIG_PPC_C29X) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000 +#else #define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 +#endif #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 @@ -3031,6 +3024,12 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 #define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 +#if defined(CONFIG_BSC9132) +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000 +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \ + (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET) +#endif + #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) #define CONFIG_SYS_FSL_QMAN_ADDR \ diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h index 892848aacf..8bb342b929 100644 --- a/arch/powerpc/include/asm/ppc405.h +++ b/arch/powerpc/include/asm/ppc405.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #ifndef __PPC405_H__ #define __PPC405_H__ diff --git a/arch/powerpc/include/asm/ppc405cr.h b/arch/powerpc/include/asm/ppc405cr.h deleted file mode 100644 index 0ea69bd096..0000000000 --- a/arch/powerpc/include/asm/ppc405cr.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PPC405CR_H_ -#define _PPC405CR_H_ - -#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */ - -/* Memory mapped register */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */ - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400) - -#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700) - -/* DCR's */ -#define DCP0_CFGADDR 0x0014 /* Decompression controller addr reg */ -#define DCP0_CFGDATA 0x0015 /* Decompression controller data reg */ -#define OCM0_ISCNTL 0x0019 /* OCM I-side control reg */ -#define OCM0_DSARC 0x001a /* OCM D-side address compare */ -#define OCM0_DSCNTL 0x001b /* OCM D-side control */ -#define CPC0_PLLMR 0x00b0 /* PLL mode register */ -#define CPC0_CR0 0x00b1 /* chip control register 0 */ -#define CPC0_CR1 0x00b2 /* chip control register 1 */ -#define CPC0_PSR 0x00b4 /* chip pin strapping reg */ -#define CPC0_EIRR 0x00b6 /* ext interrupt routing reg */ -#define CPC0_SR 0x00b8 /* Power management status */ -#define CPC0_ER 0x00b9 /* Power management enable */ -#define CPC0_FR 0x00ba /* Power management force */ -#define CPC0_ECR 0x00aa /* edge conditioner register */ - -#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ -#define PLLMR_FWD_DIV_BYPASS 0xE0000000 -#define PLLMR_FWD_DIV_3 0xA0000000 -#define PLLMR_FWD_DIV_4 0x80000000 -#define PLLMR_FWD_DIV_6 0x40000000 - -#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ -#define PLLMR_FB_DIV_1 0x02000000 -#define PLLMR_FB_DIV_2 0x04000000 -#define PLLMR_FB_DIV_3 0x06000000 -#define PLLMR_FB_DIV_4 0x08000000 - -#define PLLMR_TUNING_MASK 0x01F80000 - -#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ -#define PLLMR_CPU_PLB_DIV_1 0x00000000 -#define PLLMR_CPU_PLB_DIV_2 0x00020000 -#define PLLMR_CPU_PLB_DIV_3 0x00040000 -#define PLLMR_CPU_PLB_DIV_4 0x00060000 - -#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ -#define PLLMR_OPB_PLB_DIV_1 0x00000000 -#define PLLMR_OPB_PLB_DIV_2 0x00008000 -#define PLLMR_OPB_PLB_DIV_3 0x00010000 -#define PLLMR_OPB_PLB_DIV_4 0x00018000 - -#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ -#define PLLMR_PCI_PLB_DIV_1 0x00000000 -#define PLLMR_PCI_PLB_DIV_2 0x00002000 -#define PLLMR_PCI_PLB_DIV_3 0x00004000 -#define PLLMR_PCI_PLB_DIV_4 0x00006000 - -#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ -#define PLLMR_EXB_PLB_DIV_2 0x00000000 -#define PLLMR_EXB_PLB_DIV_3 0x00000800 -#define PLLMR_EXB_PLB_DIV_4 0x00001000 -#define PLLMR_EXB_PLB_DIV_5 0x00001800 - -/* definitions for PPC405GPr (new mode strapping) */ -#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ - -#define PSR_PLL_FWD_MASK 0xC0000000 -#define PSR_PLL_FDBACK_MASK 0x30000000 -#define PSR_PLL_TUNING_MASK 0x0E000000 -#define PSR_PLB_CPU_MASK 0x01800000 -#define PSR_OPB_PLB_MASK 0x00600000 -#define PSR_PCI_PLB_MASK 0x00180000 -#define PSR_EB_PLB_MASK 0x00060000 -#define PSR_ROM_WIDTH_MASK 0x00018000 -#define PSR_ROM_LOC 0x00004000 -#define PSR_PCI_ASYNC_EN 0x00001000 -#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ -#define PSR_PCI_ARBIT_EN 0x00000400 -#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ - -#endif /* _PPC405CR_H_ */ diff --git a/arch/powerpc/include/asm/ppc440.h b/arch/powerpc/include/asm/ppc440.h index 411d441a20..0f5bc8d1c7 100644 --- a/arch/powerpc/include/asm/ppc440.h +++ b/arch/powerpc/include/asm/ppc440.h @@ -1,26 +1,3 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ - /* * (C) Copyright 2006 * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com @@ -32,7 +9,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ #ifndef __PPC440_H__ diff --git a/arch/powerpc/include/asm/ppc4xx-ebc.h b/arch/powerpc/include/asm/ppc4xx-ebc.h index 9eb50ee84d..32062fd419 100644 --- a/arch/powerpc/include/asm/ppc4xx-ebc.h +++ b/arch/powerpc/include/asm/ppc4xx-ebc.h @@ -14,12 +14,12 @@ * Within this group there is a slight variation concerning the bit field * position of the EMPL and EMPH fields: */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define CONFIG_EBC_PPC4xx_IBM_VER1 -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) #define EBC_CFG_EMPH_POS 8 #define EBC_CFG_EMPL_POS 6 @@ -32,7 +32,7 @@ /* * Define the max number of EBC banks (chip selects) */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_440GP) || defined(CONFIG_440GX) #define EBC_NUM_BANKS 8 diff --git a/arch/powerpc/include/asm/ppc4xx-emac.h b/arch/powerpc/include/asm/ppc4xx-emac.h index a219fa97fa..e6eb332220 100644 --- a/arch/powerpc/include/asm/ppc4xx-emac.h +++ b/arch/powerpc/include/asm/ppc4xx-emac.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------+ | | File Name: enetemac.h diff --git a/arch/powerpc/include/asm/ppc4xx-mal.h b/arch/powerpc/include/asm/ppc4xx-mal.h index 71986856b1..d15290dc1a 100644 --- a/arch/powerpc/include/asm/ppc4xx-mal.h +++ b/arch/powerpc/include/asm/ppc4xx-mal.h @@ -1,26 +1,7 @@ /* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------+ | | File Name: mal.h diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h index 9f2a08b8b3..8d703c6634 100644 --- a/arch/powerpc/include/asm/ppc4xx.h +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of -| the GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #ifndef __PPC4XX_H__ #define __PPC4XX_H__ @@ -27,10 +8,6 @@ /* * Include SoC specific headers */ -#if defined(CONFIG_405CR) -#include <asm/ppc405cr.h> -#endif - #if defined(CONFIG_405EP) #include <asm/ppc405ep.h> #endif diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 56b22d840a..c0fb51993e 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -847,7 +847,7 @@ /* System-On-Chip Version Register (SVR) field extraction */ #define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ -#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ +#define SVR_REV(svr) (((svr) >> 0) & 0xFF) /* Revision field */ #define SVR_CID(svr) (((svr) >> 28) & 0x0F) /* Company or manufacturer ID */ #define SVR_SOCOP(svr) (((svr) >> 22) & 0x3F) /* SOC integration options */ @@ -894,9 +894,6 @@ #define PVR_405GP_RC 0x40110082 #define PVR_405GP_RD 0x401100C4 #define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */ -#define PVR_405CR_RA 0x40110041 -#define PVR_405CR_RB 0x401100C5 -#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */ #define PVR_405EP_RA 0x51210950 #define PVR_405GPR_RB 0x50910951 #define PVR_405EZ_RA 0x41511460 @@ -1043,9 +1040,6 @@ /* System Version Register (SVR) field extraction */ -#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ -#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */ - #define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */ #define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */ @@ -1119,6 +1113,9 @@ #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 #define SVR_T4160 0x824100 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index f17b146da3..5916f7ce99 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -67,7 +67,6 @@ typedef struct bd_info { unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ - defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || \ diff --git a/arch/x86/cpu/coreboot/config.mk b/arch/x86/cpu/coreboot/config.mk deleted file mode 100644 index 0bbd2ffb59..0000000000 --- a/arch/x86/cpu/coreboot/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# Copyright (c) 2012 The Chromium OS Authors. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_ARCH_DEVICE_TREE := coreboot diff --git a/arch/x86/cpu/coreboot/tables.c b/arch/x86/cpu/coreboot/tables.c index b116d59555..0d91adc5e4 100644 --- a/arch/x86/cpu/coreboot/tables.c +++ b/arch/x86/cpu/coreboot/tables.c @@ -4,28 +4,7 @@ * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2009 coresystems GmbH * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #include <common.h> diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h index 78d3a9d49e..8e4a61de7d 100644 --- a/arch/x86/include/asm/arch-coreboot/sysinfo.h +++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h @@ -3,28 +3,7 @@ * * Copyright (C) 2008 Advanced Micro Devices, Inc. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _COREBOOT_SYSINFO_H diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h index ad34a8b0f1..0d02fe0592 100644 --- a/arch/x86/include/asm/arch-coreboot/tables.h +++ b/arch/x86/include/asm/arch-coreboot/tables.h @@ -3,28 +3,7 @@ * * Copyright (C) 2008 Advanced Micro Devices, Inc. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _COREBOOT_TABLES_H diff --git a/board/AndesTech/adp-ag102/Makefile b/board/AndesTech/adp-ag102/Makefile index ec67dd04b0..6c187190b2 100644 --- a/board/AndesTech/adp-ag102/Makefile +++ b/board/AndesTech/adp-ag102/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := adp-ag102.o +COBJS-y := adp-ag102.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) diff --git a/board/a3m071/README b/board/a3m071/README index a0fe832fb2..112c47b60d 100644 --- a/board/a3m071/README +++ b/board/a3m071/README @@ -57,13 +57,13 @@ the following command: => fdt print 5. Save fdt to NOR flash: -=> erase fc060000 fc07ffff -=> cp.b 1800000 fc060000 10000 +=> erase fc180000 fc07ffff +=> cp.b 1800000 fc180000 10000 All this can be integrated into an environment command: -=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \ - fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc060000 fc07ffff; \ - cp.b 1800000 fc060000 10000' +=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip addtty; \ + fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc180000 fc07ffff; \ + cp.b 1800000 fc180000 10000' => saveenv After this, only "run upd_fdt" needs to get called to load, patch diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk deleted file mode 100644 index 9d3c5ae277..0000000000 --- a/board/atmel/at91sam9m10g45ek/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x73f00000 diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk deleted file mode 100644 index 6589a12a93..0000000000 --- a/board/atmel/at91sam9x5ek/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x26f00000 diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 4a309ad17f..97caf64d40 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -17,6 +17,7 @@ #include <lcd.h> #include <atmel_lcdc.h> #include <atmel_mci.h> +#include <micrel.h> #include <net.h> #include <netdev.h> @@ -178,6 +179,8 @@ int board_init(void) #ifdef CONFIG_MACB if (has_emac()) at91_macb_hw_init(); + if (has_gmac()) + at91_gmac_hw_init(); #endif #ifdef CONFIG_LCD if (has_lcdc()) @@ -193,6 +196,21 @@ int dram_init(void) return 0; } +int board_phy_config(struct phy_device *phydev) +{ + /* rx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x2222); + /* tx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x2222); + /* rx/tx clock delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf2f4); + + return 0; +} + int board_eth_init(bd_t *bis) { int rc = 0; @@ -200,6 +218,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_MACB if (has_emac()) rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); + if (has_gmac()) + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); #endif return rc; diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 79ab44904e..f664f6de6b 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -622,7 +622,6 @@ int board_video_skip(void) static void setup_display(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; int reg; @@ -633,10 +632,6 @@ static void setup_display(void) reg |= MXC_CCM_CCGR3_LDB_DI0_MASK; writel(reg, &mxc_ccm->CCGR3); - /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ - writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); - writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set); - /* set LDB0, LDB1 clk select to 011/011 */ reg = readl(&mxc_ccm->cs2cdr); reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK @@ -666,7 +661,8 @@ static void setup_display(void) writel(reg, &iomux->gpr[2]); reg = readl(&iomux->gpr[3]); - reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) + reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK + |IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); writel(reg, &iomux->gpr[3]); diff --git a/board/chromebook-x86/coreboot/config.mk b/board/chromebook-x86/coreboot/config.mk index f720851aac..0c05dd03db 100644 --- a/board/chromebook-x86/coreboot/config.mk +++ b/board/chromebook-x86/coreboot/config.mk @@ -1,37 +1,7 @@ # # Copyright (c) 2011 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. # -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# Alternatively, this software may be distributed under the terms of the -# GNU General Public License ("GPL") version 2 as published by the Free -# Software Foundation. +# SPDX-License-Identifier: GPL-2.0 BSD-3-Clause # HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts index d0738cbf46..c95ee8a108 100644 --- a/board/chromebook-x86/dts/link.dts +++ b/board/chromebook-x86/dts/link.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +/include/ "coreboot.dtsi" / { #address-cells = <1>; diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README index bbf0f75a4d..5e76d2ac5e 100644 --- a/board/congatec/cgtqmx6eval/README +++ b/board/congatec/cgtqmx6eval/README @@ -7,8 +7,7 @@ Conga-QEVAl Evaluation Carrier board with qmx6 quad module. 1. Boot source, boot from SD card --------------------------------- -This version of u-boot works only on the SD card. By default, the -Congatec board can boot only from the SPI-NOR. +By default, the Congatec board can boot only from the SPI-NOR. But, with the u-boot version provided with the board you can write boot registers to force the board to reboot and boot from the SD slot. If "bmode" command is not available from your pre-installed u-boot, these diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S index 1662141488..82f21b08b2 100644 --- a/board/cray/L1/init.S +++ b/board/cray/L1/init.S @@ -1,27 +1,6 @@ -/*------------------------------------------------------------------------------+ */ -/* */ -/* This source code is dual-licensed. You may use it under the terms */ -/* of the GNU General Public License version 2, or under the license */ -/* below. */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------------- */ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ diff --git a/board/csb272/init.S b/board/csb272/init.S index 82c6fdb965..b1283aa69a 100644 --- a/board/csb272/init.S +++ b/board/csb272/init.S @@ -1,26 +1,6 @@ -/****************************************************************************** - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - * - *****************************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/csb472/init.S b/board/csb472/init.S index e00b5f530c..f5805b7988 100644 --- a/board/csb472/init.S +++ b/board/csb472/init.S @@ -1,26 +1,6 @@ -/****************************************************************************** - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - * - *****************************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index c786997799..c4444c7c7f 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/arch/davinci_misc.h> #include <asm/gpio.h> -#include <asm/arch/da8xx-fb.h> +#include "../../../drivers/video/da8xx-fb.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +43,30 @@ static const struct da8xx_panel lcd_panel = { .invert_pxl_clk = 0, }; +static const struct display_panel disp_panel = { + QVGA, + 16, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 255, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + /* SPI0 pin muxer settings */ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 1 }, @@ -259,7 +283,7 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - da8xx_video_init(&lcd_panel, 16); + da8xx_video_init(&lcd_panel, &lcd_cfg, 16); return 0; } diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c deleted file mode 100644 index 5884975959..0000000000 --- a/board/esd/canbt/canbt.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2001 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include "canbt.h" -#include <asm/processor.h> -#include <asm/io.h> -#include <command.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -#if 0 -#define FPGA_DEBUG -#endif - -/* fpga configuration data */ -const unsigned char fpgadata[] = { -#include "fpgadata.c" -}; - -/* - * include common fpga code (for esd boards) - */ -#include "../common/fpga.c" - - -int board_early_init_f (void) -{ - unsigned long CPC0_CR0Reg; - int index, len, i; - int status; - - /* - * Setup GPIO pins - */ - CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff; - CPC0_CR0Reg |= 0x0070f000; - mtdcr (CPC0_CR0, CPC0_CR0Reg); - -#ifdef FPGA_DEBUG - /* set up serial port with default baudrate */ - (void) get_clocks (); - gd->baudrate = CONFIG_BAUDRATE; - serial_init (); - console_init_f (); -#endif - - /* - * Boot onboard FPGA - */ - status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata)); - if (status != 0) { - /* booting FPGA failed */ -#ifndef FPGA_DEBUG - /* set up serial port with default baudrate */ - (void) get_clocks (); - gd->baudrate = CONFIG_BAUDRATE; - serial_init (); - console_init_f (); -#endif - printf ("\nFPGA: Booting failed "); - switch (status) { - case ERROR_FPGA_PRG_INIT_LOW: - printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_INIT_HIGH: - printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_DONE: - printf ("(Timeout: DONE not high after programming FPGA)\n "); - break; - } - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf ("FPGA: %s\n", &(fpgadata[index + 1])); - index += len + 3; - } - putc ('\n'); - /* delayed reboot */ - for (i = 20; i > 0; i--) { - printf ("Rebooting in %2d seconds \r", i); - for (index = 0; index < 1000; index++) - udelay (1000); - } - putc ('\n'); - do_reset (NULL, 0, 0, NULL); - } - - /* - * Setup port pins for normal operation - */ - out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */ - out_be32 ((void *)GPIO0_TCR, 0x07038100); /* setup for output */ - out_be32 ((void *)GPIO0_OR, 0x07030100); /* set output pins to high (default) */ - - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive - * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive - * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive - * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr (UIC0ER, 0x00000000); /* disable all ints */ - mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ - mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */ - mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - return 0; -} - - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - int index; - int len; - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - - puts ("Board: "); - - if (!i || strncmp (str, "CANBT", 5)) { - puts ("### No HW ID - assuming CANBT\n"); - return (0); - } - - puts (str); - - puts ("\nFPGA: "); - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf ("%s ", &(fpgadata[index + 1])); - index += len + 3; - } - - putc ('\n'); - - return 0; -} diff --git a/board/esd/canbt/canbt.h b/board/esd/canbt/canbt.h deleted file mode 100644 index 75e7950bcd..0000000000 --- a/board/esd/canbt/canbt.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by TQ Monitor: - * - * Start Address Length - * +-----------------------+ 0x4000_0000 Start of Flash ----------------- - * | MON8xx code | 0x4000_0100 Reset Vector - * +-----------------------+ 0x400?_???? - * | (unused) | - * +-----------------------+ 0x4001_FF00 - * | Ethernet Addresses | 0x78 - * +-----------------------+ 0x4001_FF78 - * | (Reserved for MON8xx) | 0x44 - * +-----------------------+ 0x4001_FFBC - * | Lock Address | 0x04 - * +-----------------------+ 0x4001_FFC0 ^ - * | Hardware Information | 0x40 | MON8xx - * +=======================+ 0x4002_0000 (sector border) ----------------- - * | Autostart Header | | Applications - * | ... | v - * - *****************************************************************************/ diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c deleted file mode 100644 index 34bdc053fc..0000000000 --- a/board/esd/canbt/flash.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - uint pbcr; - unsigned long base_b0; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Setup offsets */ - flash_get_offsets (-size_b0, &flash_info[0]); - - /* Re-do sizing to get full correct info */ - mtdcr(EBC0_CFGADDR, PB0CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB0CR); - base_b0 = -size_b0; - pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(EBC0_CFGDATA, pbcr); - /* printf("PB1CR = %x\n", pbcr); */ - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -monitor_flash_len, - 0xffffffff, - &flash_info[0]); - - flash_info[0].size = size_b0; - - return (size_b0); -} diff --git a/board/esd/canbt/fpgadata.c b/board/esd/canbt/fpgadata.c deleted file mode 100644 index af401cdab1..0000000000 --- a/board/esd/canbt/fpgadata.c +++ /dev/null @@ -1,807 +0,0 @@ -0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, -0x0f, 0xf0, 0x00, 0x00, 0x01, 0x61, 0x00, 0x0c, -0x69, 0x6f, 0x5f, 0x63, 0x68, 0x69, 0x70, 0x2e, -0x6e, 0x63, 0x64, 0x00, 0x62, 0x00, 0x0b, 0x73, -0x30, 0x35, 0x78, 0x6c, 0x76, 0x71, 0x31, 0x30, -0x30, 0x00, 0x63, 0x00, 0x0b, 0x32, 0x30, 0x30, -0x31, 0x2f, 0x31, 0x31, 0x2f, 0x32, 0x33, 0x00, -0x64, 0x00, 0x09, 0x31, 0x33, 0x3a, 0x33, 0x34, -0x3a, 0x34, 0x33, 0x00, 0x65, 0xe2, 0x01, 0x00, -0x00, 0x18, 0xe6, 0xff, 0x30, 0xe8, 0x01, 0x01, -0x01, 0x01, 0xe7, 0xe6, 0x04, 0x01, 0x0d, 0x04, -0x07, 0x03, 0x05, 0x03, 0x05, 0x03, 0xe5, 0xe5, -0x05, 0x09, 0x04, 0x06, 0x01, 0x07, 0x09, 0x01, -0x07, 0x0b, 0x0f, 0x07, 0x03, 0x05, 0x03, 0x05, -0x03, 0x11, 0x03, 0x0f, 0x09, 0x03, 0x05, 0x10, -0xe5, 0xe6, 0x1a, 0x0a, 0x13, 0x29, 0x19, 0x05, -0x09, 0x04, 0x04, 0x09, 0x09, 0x09, 0x0b, 0x04, -0x04, 0x09, 0x09, 0x09, 0x0e, 0xe5, 0x01, 0x14, -0x09, 0x09, 0x09, 0x03, 0x05, 0x0b, 0x03, 0x05, -0x09, 0x09, 0x09, 0x09, 0x01, 0xe6, 0x7b, 0x01, -0x01, 0x02, 0x75, 0xe8, 0x3e, 0x3b, 0x02, 0x34, -0x0a, 0x09, 0x07, 0x09, 0x01, 0x11, 0x0a, 0xe5, -0xe6, 0x5c, 0x1e, 0xe6, 0xe5, 0x0a, 0xe5, 0x50, -0x1d, 0x0d, 0x31, 0x09, 0x14, 0x13, 0x07, 0x01, -0x01, 0x2a, 0x08, 0x0b, 0x1e, 0x1c, 0x01, 0xe5, -0x0f, 0x09, 0x09, 0xe5, 0x07, 0x09, 0xe6, 0x08, -0x05, 0x03, 0x01, 0x07, 0x09, 0x09, 0x0d, 0xe8, -0x0f, 0x09, 0xe5, 0x07, 0x09, 0x04, 0x05, 0x0a, -0x01, 0x07, 0x01, 0x07, 0x09, 0x09, 0x0d, 0xe5, -0xe6, 0x0c, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x03, 0x03, 0xe5, 0x06, 0xe5, 0xe6, 0x03, -0x03, 0xe5, 0x04, 0x02, 0xe5, 0x01, 0x05, 0xe5, -0x07, 0xe5, 0x01, 0x07, 0x05, 0xe7, 0x0f, 0x09, -0x09, 0x09, 0x10, 0x04, 0x05, 0x03, 0x03, 0x05, -0x09, 0x09, 0x08, 0x08, 0x04, 0x01, 0x06, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x02, 0xe5, 0x04, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x02, 0x04, 0xe5, 0x07, 0x02, 0x03, -0x02, 0xe5, 0x0e, 0x09, 0x09, 0x09, 0x15, 0x09, -0x09, 0x09, 0x09, 0x0e, 0xe6, 0xe5, 0x0c, 0x09, -0x09, 0x09, 0x09, 0x04, 0x04, 0x01, 0x09, 0x06, -0x02, 0x09, 0x09, 0x11, 0xe7, 0x0c, 0x02, 0x06, -0x02, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x02, -0x06, 0x02, 0x03, 0x02, 0x01, 0x02, 0x06, 0x02, -0x01, 0x04, 0x02, 0x06, 0x02, 0x03, 0x02, 0x02, -0x11, 0x03, 0x17, 0x03, 0x05, 0x12, 0x15, 0x02, -0x23, 0x08, 0x16, 0x06, 0x0c, 0x05, 0x15, 0x07, -0x01, 0x0a, 0x02, 0x0f, 0x01, 0x07, 0x02, 0xe5, -0xe5, 0x08, 0x07, 0x02, 0x07, 0x02, 0x10, 0x03, -0x11, 0x03, 0x2b, 0x05, 0xe6, 0x2b, 0x0a, 0x06, -0x01, 0x01, 0x11, 0x0b, 0x0e, 0xe5, 0x08, 0xe6, -0xe5, 0x0f, 0x09, 0x09, 0x09, 0x09, 0x0b, 0x09, -0x09, 0x01, 0x07, 0x09, 0x0e, 0x01, 0xe5, 0x0f, -0x0d, 0x22, 0xe5, 0xe5, 0x27, 0x0e, 0xe6, 0x47, -0x11, 0x17, 0x02, 0x04, 0x01, 0x01, 0x0d, 0x0d, -0x1f, 0x04, 0x01, 0x24, 0x10, 0x03, 0x01, 0x2a, -0x12, 0x0c, 0x06, 0xe5, 0x0a, 0x09, 0x11, 0xe5, -0x01, 0x1c, 0x09, 0x17, 0x0b, 0x09, 0x09, 0x04, -0x19, 0xe5, 0x0c, 0x01, 0x0d, 0x22, 0x0a, 0x01, -0x0d, 0xe5, 0x04, 0x18, 0x01, 0xe5, 0x01, 0x05, -0x04, 0x01, 0x02, 0xe5, 0x14, 0x10, 0x0b, 0x02, -0x01, 0x02, 0x02, 0xe5, 0x19, 0x0d, 0xe5, 0xe5, -0x0e, 0x09, 0x09, 0x02, 0x06, 0x09, 0x02, 0x03, -0x04, 0x03, 0x05, 0x09, 0x15, 0x0c, 0x02, 0xe5, -0x01, 0x0b, 0x04, 0x04, 0x09, 0x09, 0x02, 0x06, -0x09, 0xe5, 0x01, 0x06, 0x05, 0x03, 0x06, 0x1e, -0x02, 0x1c, 0x1d, 0x08, 0xe5, 0x05, 0x02, 0x06, -0x02, 0x03, 0xe5, 0x1b, 0x03, 0x17, 0xe5, 0x08, -0x02, 0x09, 0xe5, 0x09, 0x0f, 0xe5, 0x08, 0x07, -0x09, 0x06, 0x0b, 0x02, 0x17, 0xe5, 0x09, 0x01, -0x1f, 0x05, 0xe5, 0x02, 0x05, 0x03, 0x1f, 0xe5, -0xe6, 0x0e, 0x09, 0x03, 0x05, 0x03, 0x05, 0x09, -0x11, 0x01, 0x01, 0x04, 0x0c, 0x01, 0x0a, 0x0e, -0x01, 0xe5, 0x0c, 0xe6, 0x06, 0xe6, 0x06, 0xe6, -0x06, 0xe6, 0x02, 0x03, 0xe6, 0x03, 0x03, 0x02, -0x09, 0x06, 0xe5, 0xe5, 0x25, 0x14, 0x1a, 0x12, -0x05, 0x04, 0x02, 0x13, 0x16, 0xe7, 0xe5, 0x11, -0xe5, 0x11, 0xe5, 0x06, 0xe5, 0x14, 0xe5, 0x11, -0xe5, 0x03, 0xe5, 0x08, 0xe5, 0x06, 0x01, 0x02, -0x02, 0x02, 0x01, 0x2c, 0xe5, 0x08, 0x01, 0x1d, -0xe5, 0xe6, 0x01, 0x02, 0x01, 0x04, 0x09, 0x01, -0x02, 0xe6, 0x03, 0x04, 0xe5, 0x02, 0x01, 0x02, -0xe5, 0x02, 0x01, 0x07, 0x01, 0x07, 0x01, 0x07, -0x01, 0x02, 0xe5, 0x04, 0x01, 0x07, 0x05, 0xe5, -0x01, 0x01, 0x02, 0xe5, 0x07, 0xe5, 0x01, 0x01, -0xe5, 0x09, 0xe5, 0xe5, 0xe7, 0x01, 0x0e, 0x08, -0x03, 0xe5, 0x04, 0x02, 0x06, 0x02, 0xe5, 0x04, -0x0d, 0xe5, 0x07, 0xe5, 0x08, 0xe5, 0x07, 0x05, -0x07, 0x02, 0x01, 0x01, 0xe8, 0xe5, 0x10, 0x01, -0x05, 0x0c, 0x10, 0xe5, 0x01, 0x06, 0xe5, 0x08, -0x08, 0xe6, 0x01, 0x02, 0x05, 0xe5, 0x04, 0xe5, -0x01, 0x06, 0xe5, 0x01, 0xe5, 0x01, 0x10, 0x02, -0x05, 0xe5, 0x01, 0x06, 0x02, 0x06, 0x02, 0x05, -0x03, 0x07, 0xe5, 0x01, 0x05, 0xe5, 0x01, 0x05, -0x04, 0x03, 0x03, 0xe5, 0x04, 0x08, 0xe6, 0xe5, -0xe6, 0x01, 0x0b, 0x05, 0x03, 0x09, 0x09, 0x09, -0x06, 0x04, 0x05, 0x01, 0x01, 0x09, 0x05, 0x0a, -0x01, 0x01, 0x02, 0x08, 0x02, 0xe5, 0xe6, 0x01, -0x11, 0xe5, 0x31, 0x14, 0x10, 0x0a, 0x02, 0xe8, -0x0c, 0x03, 0xe6, 0x02, 0x03, 0x05, 0x03, 0x05, -0x03, 0x02, 0x02, 0x03, 0x02, 0x04, 0x03, 0x01, -0x03, 0x03, 0x05, 0x0d, 0xe5, 0x06, 0x0b, 0x01, -0x01, 0x11, 0x0c, 0x01, 0x04, 0x02, 0x01, 0x04, -0x02, 0x09, 0x0b, 0x01, 0x07, 0x01, 0x07, 0x09, -0x13, 0xe6, 0xe6, 0x0a, 0x02, 0x06, 0x02, 0x03, -0x02, 0x02, 0x04, 0xe6, 0x01, 0x05, 0xe5, 0x01, -0x03, 0x07, 0x03, 0x02, 0x02, 0x05, 0xe5, 0x01, -0x03, 0x02, 0x02, 0x03, 0xe5, 0xe5, 0x01, 0x06, -0x04, 0x01, 0x01, 0xe5, 0xe5, 0x01, 0x08, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x08, 0x08, 0xe5, 0x08, -0x0a, 0xe5, 0x05, 0x09, 0x02, 0x09, 0x05, 0xe5, -0x01, 0x07, 0xe5, 0xe6, 0x08, 0x05, 0x03, 0x05, -0x03, 0x05, 0x05, 0x03, 0x03, 0x05, 0x03, 0x07, -0x03, 0x05, 0x09, 0x03, 0x0a, 0x08, 0x0d, 0xe5, -0x5e, 0x06, 0x07, 0x0b, 0xe8, 0x10, 0x01, 0x07, -0x09, 0x01, 0x07, 0x01, 0x07, 0x0b, 0x09, 0x09, -0x08, 0x03, 0x06, 0x0c, 0xe8, 0x09, 0x54, 0x01, -0x0d, 0x02, 0x07, 0x01, 0x01, 0x15, 0xe5, 0x05, -0xe7, 0x05, 0xe7, 0x07, 0xe5, 0x06, 0xe6, 0x08, -0xe6, 0x05, 0xe7, 0x06, 0xe7, 0xe5, 0x02, 0xe7, -0x05, 0xe7, 0x0a, 0x10, 0xe5, 0x07, 0x09, 0x33, -0x06, 0x0b, 0x0f, 0xe7, 0x19, 0x05, 0x03, 0x02, -0x02, 0x13, 0x0b, 0x09, 0x03, 0x05, 0x06, 0x02, -0xe5, 0x07, 0x08, 0x02, 0xe5, 0x1b, 0xe6, 0x07, -0xe5, 0x11, 0xe5, 0x01, 0x07, 0xe5, 0x06, 0xe6, -0x07, 0xe5, 0xe5, 0xe5, 0x03, 0xe5, 0x02, 0x03, -0xe6, 0x0a, 0xe5, 0x02, 0x0e, 0x09, 0xe5, 0xe6, -0x04, 0xe8, 0x04, 0x09, 0xe5, 0xe6, 0x06, 0xe5, -0xe6, 0x04, 0xe5, 0xe6, 0x04, 0xe5, 0xe7, 0xe6, -0x01, 0x01, 0xe6, 0x03, 0xe8, 0x06, 0x01, 0x01, -0x0e, 0x01, 0x03, 0x03, 0x01, 0x07, 0x01, 0x07, -0x01, 0xe5, 0x05, 0x01, 0x09, 0x01, 0x07, 0x01, -0x07, 0x01, 0x01, 0x08, 0x08, 0x01, 0x0a, 0xe9, -0x10, 0x01, 0x01, 0x05, 0x01, 0xe5, 0x05, 0x01, -0xe6, 0x04, 0x01, 0xe6, 0x04, 0x01, 0x01, 0x02, -0x03, 0xe5, 0xe5, 0xe5, 0x03, 0xe5, 0xe5, 0x06, -0x01, 0x02, 0x04, 0x01, 0x07, 0x01, 0xe5, 0x08, -0x01, 0xe6, 0x0e, 0xe5, 0x02, 0x0e, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0xe5, 0x0d, 0x09, 0xe5, 0x06, -0x04, 0xe5, 0x05, 0x01, 0xe5, 0x0c, 0xe6, 0xe6, -0x1e, 0x07, 0x15, 0x07, 0x09, 0xe5, 0x0d, 0xe5, -0xe5, 0xe5, 0x01, 0x01, 0x09, 0x04, 0xe6, 0xe6, -0x04, 0x02, 0x04, 0x01, 0x02, 0x09, 0x04, 0x01, -0x02, 0x04, 0x01, 0x07, 0x01, 0x04, 0x02, 0x08, -0x0b, 0x06, 0x0e, 0x10, 0xe5, 0xe6, 0x0b, 0x01, -0x07, 0x01, 0x03, 0xe5, 0x01, 0x01, 0x07, 0x01, -0x07, 0x01, 0x02, 0x05, 0x09, 0x17, 0x04, 0x03, -0x03, 0x09, 0xe7, 0xe5, 0x0d, 0x01, 0x07, 0x01, -0x07, 0x01, 0x04, 0x02, 0x01, 0x07, 0x01, 0x04, -0x01, 0x0a, 0x07, 0x06, 0x01, 0x02, 0x0a, 0x13, -0xe6, 0x0d, 0x03, 0x05, 0x09, 0x03, 0x05, 0x09, -0x03, 0x03, 0x03, 0x02, 0x05, 0xe5, 0x02, 0x04, -0xe5, 0x07, 0xe5, 0x01, 0x03, 0x02, 0x0d, 0x01, -0x02, 0x0d, 0x02, 0x02, 0x03, 0x09, 0x02, 0x06, -0x04, 0x04, 0x02, 0xe5, 0x04, 0x01, 0x05, 0x03, -0x01, 0xe5, 0x05, 0x01, 0x07, 0x01, 0x08, 0x0c, -0x06, 0x06, 0x02, 0x05, 0xe6, 0x06, 0xe6, 0x06, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0xe5, 0x03, 0xe5, -0x01, 0xe5, 0xe5, 0xe5, 0x06, 0x09, 0x01, 0xe5, -0x17, 0x03, 0x01, 0xe6, 0x09, 0x02, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0x01, 0xe6, 0x07, 0x11, 0xe5, 0xe5, 0x09, 0x02, -0x0e, 0x0b, 0x04, 0x01, 0x03, 0x03, 0x09, 0x01, -0x07, 0x04, 0x04, 0x02, 0xe5, 0xe6, 0x03, 0x07, -0x18, 0xe5, 0x13, 0xe5, 0xe6, 0x0c, 0xe5, 0x03, -0x03, 0xe5, 0x07, 0xe5, 0x02, 0x04, 0xe5, 0x07, -0xe5, 0x0a, 0x03, 0xe5, 0x01, 0x01, 0x07, 0x01, -0xe5, 0x03, 0xe5, 0x09, 0x01, 0x0a, 0x02, 0x03, -0xe5, 0x0c, 0xe6, 0x06, 0xe6, 0x01, 0x04, 0xe6, -0x06, 0xe7, 0xe5, 0x03, 0xe6, 0x01, 0x05, 0x02, -0x09, 0x05, 0x03, 0x07, 0x01, 0x02, 0x06, 0x0a, -0x03, 0xe5, 0xe6, 0xe5, 0x06, 0x1c, 0x1a, 0xe5, -0x02, 0x05, 0x0a, 0x12, 0x02, 0x0c, 0xe5, 0x01, -0x01, 0x1b, 0xe5, 0x04, 0x03, 0x01, 0x06, 0xe5, -0x10, 0xe5, 0x01, 0xe5, 0x03, 0xe5, 0x12, 0xe5, -0x06, 0xe5, 0x07, 0x01, 0x03, 0xe9, 0xe5, 0x17, -0xe5, 0x08, 0xe5, 0x06, 0xe5, 0x08, 0xe5, 0x09, -0xe5, 0x17, 0x03, 0x01, 0x0e, 0x01, 0x01, 0x02, -0x02, 0x01, 0x04, 0xe5, 0x02, 0x04, 0xe5, 0x02, -0x09, 0x09, 0x09, 0x04, 0xe5, 0x04, 0x01, 0xe5, -0x05, 0x01, 0xe5, 0x05, 0x01, 0x08, 0xe5, 0x01, -0xe5, 0x05, 0xe5, 0x07, 0xe5, 0x01, 0x01, 0xe5, -0x01, 0x1b, 0x09, 0xe5, 0x07, 0x14, 0xe5, 0x05, -0x01, 0xe5, 0x04, 0x02, 0xe5, 0x01, 0x06, 0x0d, -0x02, 0x01, 0xe5, 0x02, 0xe5, 0xe5, 0x06, 0x01, -0x05, 0xe5, 0x01, 0x05, 0x02, 0x10, 0xe5, 0xe6, -0x04, 0x01, 0x01, 0x06, 0x01, 0x02, 0x0f, 0xe5, -0x01, 0xe5, 0x02, 0xe5, 0x01, 0x08, 0x01, 0x06, -0xe5, 0xe7, 0x01, 0x06, 0x02, 0x05, 0x01, 0x01, -0x05, 0x03, 0x07, 0x01, 0x05, 0x01, 0x01, 0x05, -0x0d, 0x01, 0x0f, 0x04, 0x04, 0x08, 0x01, 0x02, -0x04, 0xe6, 0x01, 0xe6, 0x01, 0x0b, 0x09, 0x06, -0x02, 0x09, 0x09, 0x0b, 0x05, 0x03, 0x09, 0x0a, -0x02, 0x06, 0x08, 0x02, 0x02, 0xe6, 0xe5, 0x12, -0xe5, 0x11, 0xe5, 0x1d, 0xe6, 0x14, 0x04, 0xe6, -0x01, 0x0f, 0x03, 0xe6, 0x07, 0x05, 0x03, 0x02, -0x02, 0x03, 0x05, 0x03, 0xe5, 0x03, 0x03, 0x02, -0x02, 0x03, 0x02, 0x04, 0x03, 0xe5, 0x03, 0x03, -0x05, 0x03, 0x08, 0xe5, 0x01, 0x12, 0xe5, 0xe5, -0xe5, 0x07, 0x01, 0x07, 0xe5, 0x07, 0x01, 0x04, -0x16, 0x08, 0x02, 0xe5, 0x04, 0x02, 0x01, 0x07, -0x01, 0x07, 0xe5, 0x07, 0x09, 0xe5, 0x01, 0xe5, -0x09, 0xe5, 0x01, 0x06, 0x02, 0x03, 0x02, 0x02, -0x06, 0x02, 0x06, 0x02, 0x03, 0x07, 0x06, 0x02, -0x03, 0x05, 0x03, 0xe5, 0xe5, 0x01, 0x04, 0x01, -0x02, 0x05, 0xe5, 0x05, 0x01, 0xe5, 0xe5, 0x0a, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0x09, 0xe5, -0x08, 0x0a, 0xe5, 0x08, 0x09, 0x05, 0x03, 0x06, -0x02, 0x07, 0xe8, 0x08, 0x05, 0x03, 0x05, 0x03, -0x05, 0x09, 0x03, 0x05, 0x05, 0x05, 0x03, 0x05, -0x03, 0x05, 0x04, 0x09, 0x0a, 0x08, 0xe5, 0xe6, -0x5b, 0x07, 0x17, 0xe6, 0x01, 0x0e, 0x09, 0x09, -0x01, 0x07, 0x09, 0x0b, 0x01, 0x07, 0x01, 0x07, -0x05, 0x03, 0x04, 0xe5, 0x01, 0x0e, 0xe5, 0xe6, -0x1c, 0x1c, 0xe5, 0x1e, 0x04, 0x09, 0x0e, 0x01, -0xe6, 0x08, 0x0b, 0xe5, 0x05, 0x01, 0xe5, 0x05, -0x01, 0xe5, 0x07, 0xe5, 0x05, 0x01, 0xe5, 0x07, -0xe7, 0x05, 0xe7, 0x05, 0x01, 0xe6, 0x04, 0x01, -0xe6, 0x04, 0xe7, 0x06, 0x02, 0xe5, 0xe5, 0x0d, -0xe5, 0x07, 0x29, 0x09, 0x09, 0x08, 0x09, 0x0e, -0x03, 0x20, 0x09, 0x13, 0x05, 0x05, 0x03, 0x05, -0x09, 0x09, 0xe5, 0x07, 0x09, 0xe6, 0x19, 0x02, -0x01, 0x07, 0x01, 0x11, 0x01, 0x02, 0x06, 0xe6, -0x06, 0xe6, 0x03, 0x02, 0x01, 0x07, 0x01, 0x03, -0x03, 0xe6, 0x07, 0xe5, 0xe6, 0x11, 0x09, 0xe8, -0x04, 0x01, 0xe6, 0x04, 0x09, 0xe8, 0x06, 0xe5, -0xe6, 0x04, 0xe5, 0xe6, 0x04, 0xe8, 0x04, 0xe9, -0x04, 0x01, 0xe5, 0x06, 0x03, 0xe5, 0x0b, 0xe5, -0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, -0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x07, 0xe5, 0xe5, -0x05, 0xe5, 0xe6, 0x04, 0x02, 0x06, 0x02, 0x01, -0x14, 0xe9, 0x05, 0x0a, 0x01, 0xe5, 0x05, 0x01, -0xe5, 0x05, 0x01, 0xe6, 0x04, 0x01, 0x01, 0x05, -0x01, 0xe6, 0x01, 0x04, 0x01, 0x01, 0x05, 0x01, -0xe6, 0x01, 0x02, 0x01, 0x01, 0x05, 0x01, 0x01, -0x05, 0x01, 0x02, 0x07, 0xe8, 0x02, 0x05, 0x04, -0x07, 0x01, 0xe5, 0x07, 0x03, 0x02, 0x02, 0x09, -0x04, 0x01, 0x04, 0x04, 0xe5, 0x02, 0xe6, 0x02, -0x02, 0x02, 0x03, 0x02, 0xe5, 0x01, 0x1a, 0xe5, -0x1a, 0x02, 0x06, 0x0a, 0x02, 0x16, 0x08, 0xe5, -0x06, 0x04, 0x02, 0x02, 0x0d, 0xe5, 0xe5, 0x01, -0xe6, 0x12, 0x04, 0x1b, 0x04, 0x05, 0x0a, 0x02, -0x02, 0x07, 0x0b, 0x15, 0xe5, 0x01, 0xe5, 0x0b, -0xe6, 0x03, 0x02, 0xe6, 0x03, 0x02, 0xe6, 0x03, -0x02, 0xe7, 0x05, 0xe6, 0x02, 0x08, 0x09, 0x06, -0xe6, 0x01, 0x02, 0x03, 0x09, 0xe5, 0x01, 0x09, -0x04, 0x09, 0x03, 0x09, 0x09, 0x09, 0x09, 0x03, -0x03, 0x01, 0xe5, 0x07, 0x0b, 0x19, 0x0c, 0xe7, -0x08, 0x08, 0x06, 0xe6, 0x0c, 0x01, 0xe6, 0x04, -0x0a, 0xe5, 0x05, 0xe5, 0x03, 0x02, 0x0a, 0x03, -0x05, 0x03, 0x05, 0x09, 0x04, 0x10, 0x13, 0x06, -0x02, 0x09, 0x02, 0x03, 0x04, 0x04, 0x04, 0x09, -0x0f, 0x12, 0x02, 0x01, 0x04, 0x15, 0x02, 0x08, -0x02, 0x04, 0x0e, 0x08, 0x05, 0x28, 0x04, 0x01, -0x03, 0x19, 0x20, 0xe6, 0x08, 0x06, 0x10, 0x19, -0x01, 0x06, 0x01, 0x1d, 0x15, 0x02, 0x0a, 0x08, -0x06, 0x01, 0xe6, 0x06, 0x07, 0x0b, 0x02, 0xe7, -0xe5, 0x05, 0x09, 0x01, 0x11, 0x04, 0xe5, 0x02, -0x04, 0xe5, 0x04, 0x01, 0x08, 0x07, 0x08, 0xe5, -0x05, 0x16, 0x01, 0x02, 0x19, 0x10, 0x01, 0x0a, -0x08, 0x0d, 0x0a, 0x0b, 0x0a, 0x09, 0x01, 0x01, -0x19, 0x0e, 0x07, 0x04, 0xe5, 0x1a, 0x28, 0x02, -0x01, 0x26, 0xe5, 0x04, 0x11, 0x02, 0xe5, 0x01, -0xe5, 0xe5, 0x08, 0x02, 0xe5, 0x07, 0xe5, 0x13, -0x01, 0xe5, 0xe9, 0xe5, 0x1b, 0xe5, 0x12, 0xe5, -0x03, 0x01, 0x02, 0x03, 0x01, 0xe5, 0x01, 0xe6, -0x03, 0x01, 0xe5, 0x0c, 0x11, 0x01, 0x01, 0xe5, -0xe5, 0xe5, 0x01, 0x01, 0x12, 0x01, 0x09, 0x02, -0x01, 0xe5, 0xe5, 0xe7, 0x01, 0xe5, 0x03, 0x08, -0x06, 0x01, 0xe5, 0x01, 0x01, 0x04, 0x03, 0x16, -0x01, 0x02, 0x01, 0xe5, 0xe6, 0x01, 0x02, 0x11, -0xe5, 0xe5, 0xe5, 0x06, 0x06, 0xe5, 0xe5, 0xe5, -0x02, 0xe5, 0x05, 0x07, 0x0b, 0x07, 0x19, 0xe5, -0x05, 0x02, 0xe6, 0xe6, 0xe5, 0x01, 0x03, 0x02, -0x16, 0x09, 0x01, 0x01, 0x02, 0x02, 0x09, 0x09, -0x01, 0x01, 0xe5, 0x03, 0x23, 0xe5, 0x01, 0xe5, -0x01, 0x06, 0x02, 0x0e, 0x05, 0x03, 0x0c, 0x01, -0x02, 0x01, 0x07, 0x03, 0x05, 0x01, 0x01, 0x05, -0x03, 0x1d, 0xe5, 0x02, 0x01, 0x02, 0x14, 0x01, -0x09, 0x07, 0x04, 0x01, 0x0e, 0x04, 0x04, 0x03, -0xe5, 0xe5, 0xe6, 0x03, 0x19, 0x02, 0x02, 0x03, -0x17, 0x01, 0x07, 0x09, 0x04, 0x01, 0xe5, 0x0c, -0x09, 0x01, 0x04, 0x01, 0xe5, 0x25, 0x01, 0xe5, -0x03, 0x03, 0x26, 0xe5, 0xe5, 0x05, 0x0c, 0x08, -0x0a, 0xe5, 0x1b, 0x02, 0xe6, 0x09, 0x01, 0x22, -0x02, 0x01, 0x13, 0x01, 0x04, 0x02, 0xe5, 0x11, -0xe5, 0x12, 0xe5, 0xe6, 0x07, 0x05, 0x09, 0x09, -0x09, 0x03, 0x05, 0x0b, 0x03, 0x05, 0x09, 0x09, -0x09, 0x06, 0x06, 0x03, 0xe5, 0x29, 0x05, 0x03, -0x05, 0x0f, 0x05, 0x20, 0x0b, 0xe5, 0x27, 0x09, -0x14, 0x07, 0x2b, 0xe7, 0x15, 0x02, 0x16, 0x10, -0x01, 0x04, 0x02, 0x09, 0x01, 0x07, 0x01, 0x18, -0x03, 0x19, 0xe5, 0x0c, 0x02, 0x01, 0x01, 0x01, -0x06, 0xe5, 0x03, 0x02, 0x01, 0xe5, 0x07, 0xe6, -0x04, 0x01, 0xe5, 0x04, 0xe5, 0xe6, 0x16, 0x03, -0xe5, 0x17, 0x22, 0x0b, 0x02, 0x2e, 0xe5, 0x01, -0x15, 0xe5, 0x01, 0x03, 0xe5, 0xe5, 0x05, 0x02, -0xe5, 0xe5, 0x04, 0xe5, 0x07, 0x0a, 0xe7, 0xe5, -0x04, 0xe5, 0x06, 0xe6, 0x07, 0xe5, 0x07, 0xe5, -0x06, 0x03, 0x04, 0x14, 0x03, 0x23, 0x01, 0x04, -0x0c, 0x01, 0xe6, 0x04, 0x01, 0x1b, 0xe5, 0x18, -0x06, 0x09, 0xe5, 0xe5, 0x0f, 0x02, 0x01, 0x06, -0x09, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x18, 0x02, -0x19, 0x04, 0xe6, 0x05, 0x01, 0xe5, 0x09, 0x0a, -0x09, 0x09, 0x07, 0x01, 0x1b, 0x01, 0x01, 0x19, -0x04, 0x08, 0xe5, 0x01, 0x04, 0x09, 0x01, 0x07, -0x0b, 0x01, 0x05, 0x21, 0x01, 0x01, 0xe5, 0x0f, -0x19, 0xe5, 0xe5, 0x11, 0x01, 0xe6, 0x04, 0x01, -0xe5, 0xe5, 0x03, 0xe5, 0xe5, 0xe5, 0x1d, 0x01, -0xe7, 0x05, 0x0a, 0x01, 0x02, 0x04, 0x01, 0x07, -0x01, 0xe5, 0x02, 0x01, 0xe5, 0xe6, 0xe5, 0x03, -0x01, 0x01, 0x02, 0x01, 0x02, 0x01, 0xe5, 0x01, -0x03, 0x01, 0x07, 0x01, 0x01, 0x05, 0x01, 0x07, -0x01, 0x0b, 0x01, 0xe5, 0x08, 0x20, 0x09, 0x02, -0xe6, 0xe6, 0x05, 0x03, 0x0e, 0x0a, 0xe5, 0x01, -0x16, 0xe7, 0x1d, 0x08, 0x07, 0x04, 0x01, 0x03, -0x02, 0x05, 0x02, 0x06, 0x05, 0x0b, 0x07, 0x07, -0x08, 0xe5, 0x01, 0xe5, 0x11, 0x16, 0x0f, 0xe5, -0x03, 0xe5, 0xe5, 0x01, 0x04, 0x03, 0x04, 0x05, -0x06, 0x19, 0xe6, 0xe7, 0x05, 0xe5, 0x05, 0x09, -0x03, 0x09, 0x04, 0x02, 0x01, 0x02, 0x01, 0x10, -0x02, 0x01, 0x04, 0x01, 0x03, 0x20, 0x02, 0xe6, -0x10, 0x18, 0xe5, 0x03, 0x04, 0x01, 0x05, 0x01, -0x09, 0x04, 0x14, 0x16, 0xe5, 0x01, 0xe5, 0x12, -0x0b, 0x04, 0x07, 0x0e, 0x02, 0xe5, 0x02, 0x06, -0x05, 0x26, 0xe6, 0xe7, 0x12, 0xe5, 0x04, 0x0f, -0x03, 0x0b, 0x04, 0x0e, 0x0f, 0x03, 0x18, 0x01, -0xe5, 0x1a, 0xe5, 0x10, 0x05, 0x0a, 0x11, 0x14, -0x14, 0xe5, 0xe5, 0x16, 0xe6, 0x02, 0x02, 0xe7, -0x02, 0x03, 0xe6, 0x06, 0xe6, 0xe6, 0x03, 0xe5, -0x08, 0xe7, 0xe5, 0x29, 0x03, 0x02, 0x10, 0x06, -0x03, 0x05, 0x03, 0x01, 0x02, 0x0a, 0x03, 0x02, -0x07, 0xe5, 0x04, 0x0a, 0x20, 0x01, 0x01, 0xe5, -0x14, 0x17, 0x02, 0xe5, 0x19, 0x01, 0xe5, 0xe5, -0xe5, 0x02, 0x03, 0x06, 0x0d, 0x07, 0xe6, 0x01, -0x2e, 0x03, 0x02, 0x01, 0x03, 0x02, 0x01, 0x0b, -0xe5, 0x09, 0x01, 0x1f, 0x01, 0xe6, 0x12, 0x0c, -0x0e, 0x17, 0x05, 0x0d, 0x09, 0x14, 0x02, 0xe5, -0xe5, 0x01, 0x0b, 0xe5, 0xe6, 0x05, 0x02, 0xe5, -0x10, 0xe5, 0x01, 0x0e, 0xe8, 0x05, 0xe5, 0xe6, -0xe5, 0x01, 0xe5, 0x1d, 0x02, 0x01, 0xe5, 0x01, -0x0e, 0x01, 0xe5, 0x04, 0x03, 0x01, 0x0c, 0x03, -0xe5, 0x01, 0x0b, 0xe5, 0x01, 0x01, 0xe5, 0x05, -0xe5, 0x03, 0x03, 0x1b, 0x01, 0x01, 0xe5, 0xe5, -0xe5, 0x03, 0x15, 0x12, 0x07, 0x0b, 0x01, 0x04, -0xe5, 0x03, 0x06, 0x1a, 0x01, 0x02, 0x01, 0xe5, -0xe6, 0xe7, 0xe5, 0x16, 0x10, 0x01, 0x07, 0x05, -0xe5, 0x03, 0x01, 0x04, 0xe5, 0xe5, 0x01, 0x06, -0x1a, 0xe5, 0x04, 0x02, 0x01, 0x01, 0xe5, 0xe5, -0x18, 0x09, 0x04, 0x04, 0x04, 0x04, 0x08, 0x0c, -0x04, 0x23, 0xe6, 0xe7, 0xe5, 0x01, 0x25, 0x04, -0x04, 0x03, 0x07, 0x03, 0x01, 0x02, 0x04, 0x04, -0xe5, 0x02, 0x1d, 0xe5, 0xe6, 0x01, 0x02, 0x18, -0x02, 0x06, 0x02, 0x02, 0x01, 0x04, 0x02, 0x06, -0x01, 0x02, 0x01, 0x03, 0xe5, 0x08, 0xe7, 0x20, -0x06, 0xe5, 0x1a, 0x01, 0xe5, 0x05, 0xe7, 0xe5, -0x03, 0x01, 0xe7, 0x02, 0xe7, 0x03, 0x01, 0x04, -0x02, 0x03, 0xe5, 0xe5, 0x01, 0x25, 0x01, 0xe5, -0x04, 0x14, 0x01, 0xe5, 0xe6, 0x02, 0x01, 0x09, -0x07, 0x01, 0x0c, 0x01, 0xe5, 0x02, 0x01, 0x02, -0x25, 0x01, 0x02, 0x01, 0x18, 0xe5, 0x07, 0xe5, -0x11, 0xe5, 0x13, 0xe5, 0x01, 0x27, 0x02, 0xe6, -0x0d, 0x09, 0xe6, 0x06, 0xe6, 0x06, 0x09, 0xe5, -0x04, 0x04, 0x09, 0xe5, 0x01, 0x05, 0x02, 0x01, -0x01, 0x02, 0x09, 0x0d, 0xe9, 0x01, 0x19, 0x09, -0x09, 0x09, 0xe5, 0x01, 0x11, 0x2a, 0x02, 0x39, -0x01, 0x13, 0x2b, 0x02, 0x17, 0x01, 0xe7, 0x06, -0x01, 0x09, 0x06, 0xe7, 0x02, 0x02, 0x01, 0x04, -0x05, 0xe6, 0xe5, 0xe6, 0xe5, 0x08, 0x18, 0xe8, -0x16, 0x01, 0xe6, 0x08, 0x09, 0x04, 0x02, 0xe6, -0x01, 0x04, 0x01, 0xe5, 0x04, 0x02, 0xe6, 0x04, -0x01, 0xe5, 0x05, 0x02, 0x17, 0xe8, 0x15, 0x04, -0x0c, 0x0e, 0x09, 0x01, 0x04, 0x04, 0x01, 0x05, -0x01, 0x06, 0x02, 0x18, 0xe6, 0xe5, 0x14, 0xe5, -0x05, 0xe6, 0x06, 0xe6, 0x08, 0xe5, 0x01, 0xe5, -0x02, 0xe5, 0x02, 0x01, 0x04, 0xe5, 0x02, 0x04, -0xe5, 0xe5, 0xe5, 0x03, 0xe5, 0xe5, 0x06, 0xe5, -0x07, 0xe5, 0x0a, 0x17, 0x01, 0xe5, 0x03, 0x09, -0x01, 0x01, 0x09, 0xe5, 0x07, 0x01, 0xe6, 0x06, -0xe5, 0x11, 0x18, 0xe5, 0x01, 0x17, 0x01, 0x03, -0x02, 0x06, 0x02, 0xe5, 0xe5, 0x08, 0x06, 0x02, -0x01, 0x06, 0x02, 0xe5, 0x04, 0x09, 0xe5, 0x19, -0xe8, 0x19, 0x03, 0xe5, 0x07, 0xe5, 0xe5, 0xe5, -0x08, 0xe5, 0x02, 0x03, 0x02, 0x04, 0x04, 0x04, -0x09, 0x04, 0x17, 0xe9, 0x1b, 0xe5, 0x07, 0xe5, -0x02, 0x01, 0x02, 0x06, 0x02, 0x06, 0x02, 0x03, -0x04, 0x02, 0x07, 0x03, 0x02, 0x1a, 0xe9, 0x09, -0x09, 0x09, 0x08, 0x05, 0xe5, 0x07, 0x0c, 0x05, -0x02, 0x06, 0x24, 0x03, 0x0b, 0x05, 0x01, 0x06, -0xe5, 0xe5, 0x06, 0xe6, 0xe5, 0x04, 0x01, 0xe5, -0x05, 0x01, 0x04, 0x04, 0xe7, 0x01, 0x03, 0x01, -0xe6, 0x04, 0x01, 0x07, 0x01, 0xe5, 0xe5, 0x03, -0x01, 0x0a, 0xe8, 0x0e, 0xe5, 0x09, 0x07, 0xe5, -0x05, 0x08, 0xe5, 0xe5, 0x02, 0x08, 0xe6, 0xe5, -0xe6, 0xe6, 0x01, 0x04, 0xe5, 0x0c, 0x0a, 0x06, -0x02, 0x01, 0xe7, 0x13, 0x07, 0xe5, 0x01, 0x01, -0x06, 0x0c, 0xe5, 0x03, 0x03, 0x03, 0x05, 0x12, -0x1a, 0x01, 0x02, 0x0d, 0x01, 0x03, 0x09, 0x02, -0x04, 0x01, 0xe5, 0xe5, 0x08, 0x09, 0xe5, 0x05, -0x03, 0x01, 0x07, 0x01, 0x0d, 0x0f, 0xe5, 0x03, -0x03, 0x03, 0xe5, 0x18, 0x0e, 0x12, 0xe7, 0x06, -0x01, 0x09, 0x03, 0x19, 0x05, 0x02, 0xe5, 0x06, -0x09, 0x09, 0xe5, 0x07, 0x02, 0x01, 0x05, 0x01, -0x0b, 0x01, 0x07, 0x03, 0x01, 0x03, 0x01, 0x0f, -0x10, 0x02, 0xe5, 0xe8, 0x08, 0x01, 0x06, 0x12, -0x06, 0x09, 0x03, 0xe5, 0x01, 0x03, 0x03, 0x03, -0xe6, 0x08, 0x06, 0x10, 0x01, 0x07, 0xe5, 0xe8, -0xe5, 0x0c, 0x0f, 0x0b, 0x02, 0xe5, 0x04, 0x04, -0x03, 0xe5, 0x02, 0x03, 0x02, 0x02, 0x01, 0x04, -0x06, 0x0b, 0x10, 0x01, 0xe5, 0xe5, 0x11, 0x01, -0x06, 0x14, 0x08, 0x02, 0x01, 0xe5, 0x03, 0xe5, -0xe5, 0x01, 0x02, 0x04, 0x02, 0x02, 0x01, 0x1f, -0x03, 0xe5, 0x0a, 0x09, 0x09, 0xe7, 0x02, 0x0d, -0xe6, 0x06, 0xe6, 0x03, 0x05, 0x04, 0x27, 0xe7, -0xe5, 0xe5, 0x06, 0x1a, 0x03, 0x0e, 0x07, 0x01, -0x0a, 0x23, 0x0b, 0xe7, 0xe6, 0x11, 0x02, 0x0a, -0xe5, 0xe5, 0x01, 0x02, 0x01, 0x07, 0x03, 0xe5, -0x05, 0x0d, 0x02, 0x02, 0x05, 0x1b, 0x02, 0x01, -0x03, 0x0f, 0x09, 0xe5, 0x06, 0x05, 0xe5, 0xe7, -0x01, 0x01, 0xe6, 0xe5, 0x04, 0xe7, 0x05, 0x02, -0xe5, 0x06, 0xe5, 0x04, 0x1d, 0x02, 0x17, 0x0d, -0x06, 0x02, 0x06, 0x16, 0x09, 0x24, 0x01, 0x01, -0x11, 0xe5, 0x08, 0x01, 0x0d, 0xe5, 0x04, 0x02, -0xe5, 0x0b, 0x08, 0x05, 0x02, 0xe6, 0x06, 0xe5, -0x13, 0x01, 0xe6, 0xe5, 0x01, 0x01, 0x0e, 0xe5, -0x08, 0xe5, 0xe6, 0x03, 0xe5, 0x0f, 0x15, 0x06, -0xe6, 0x09, 0x11, 0x01, 0x01, 0x02, 0xe6, 0x03, -0x15, 0x08, 0xe5, 0x09, 0x05, 0x06, 0x01, 0x04, -0x11, 0x01, 0x02, 0x15, 0x01, 0x02, 0x01, 0xe5, -0xe6, 0x01, 0x02, 0x17, 0x06, 0x03, 0x01, 0xe5, -0x12, 0x1a, 0x18, 0xe5, 0x04, 0x03, 0xe5, 0xe6, -0xe5, 0x18, 0x06, 0x02, 0x03, 0xe5, 0x08, 0x01, -0x05, 0x03, 0x04, 0x01, 0x01, 0x06, 0x02, 0xe5, -0xe6, 0x02, 0x01, 0x1a, 0xe5, 0xe5, 0xe5, 0x01, -0x1e, 0x03, 0x02, 0xe6, 0x01, 0x01, 0x01, 0x02, -0xe5, 0xe5, 0xe5, 0x06, 0x04, 0x04, 0x08, 0xe5, -0xe6, 0x01, 0x02, 0x15, 0x02, 0xe5, 0x03, 0xe5, -0x01, 0x18, 0x07, 0x04, 0x01, 0x0a, 0x01, 0x09, -0x01, 0x02, 0x01, 0x01, 0x08, 0x01, 0x01, 0x0c, -0x12, 0x02, 0xe8, 0x1b, 0xe6, 0x01, 0x03, 0xe5, -0xe5, 0x0b, 0x01, 0x09, 0x04, 0x01, 0x01, 0xe5, -0x08, 0x01, 0xe5, 0x22, 0x01, 0xe5, 0x07, 0x10, -0x01, 0xe5, 0x01, 0x03, 0x01, 0x02, 0x07, 0x02, -0x06, 0xe5, 0x08, 0xe5, 0x01, 0x06, 0xe5, 0x07, -0x09, 0x02, 0x10, 0x04, 0x0a, 0x01, 0x0d, 0xe5, -0x01, 0x05, 0xe5, 0x15, 0x0b, 0xe5, 0x04, 0x02, -0xe5, 0x07, 0xe6, 0x1a, 0x01, 0xe8, 0x06, 0x05, -0x09, 0xe6, 0xe5, 0x04, 0xe5, 0x02, 0x01, 0x02, -0x02, 0x06, 0x02, 0xe5, 0x01, 0x04, 0x09, 0x09, -0xe5, 0x02, 0x01, 0x02, 0x09, 0x0d, 0x01, 0x02, -0x02, 0x19, 0x03, 0x04, 0xe5, 0x02, 0x09, 0x08, -0xe5, 0x06, 0x09, 0x03, 0x09, 0x1f, 0x1f, 0x05, -0x03, 0x09, 0x09, 0x13, 0x09, 0x1e, 0x01, 0x01, -0x17, 0x01, 0xe5, 0xe5, 0x05, 0xe7, 0x02, 0x02, -0x07, 0x01, 0x04, 0x09, 0x01, 0x01, 0xe5, 0x03, -0x04, 0x02, 0x08, 0x07, 0x01, 0x0e, 0xe5, 0xe6, -0x15, 0xe5, 0xe7, 0x01, 0x02, 0x02, 0xe5, 0x01, -0x02, 0x01, 0xe5, 0x05, 0x01, 0xe5, 0x09, 0x01, -0x05, 0x02, 0xe5, 0xe5, 0x01, 0xe5, 0xe6, 0x05, -0x02, 0x06, 0x01, 0xe5, 0x0c, 0x01, 0x01, 0x08, -0x0b, 0x02, 0x0b, 0xe5, 0x05, 0x01, 0x09, 0x04, -0x06, 0x07, 0x09, 0x09, 0x09, 0x01, 0x10, 0x01, -0x15, 0xe6, 0x04, 0xe8, 0x04, 0xe8, 0xe5, 0x04, -0xe6, 0xe5, 0x03, 0xe5, 0x0a, 0x01, 0x07, 0x01, -0x01, 0x05, 0x03, 0x05, 0xe6, 0xe5, 0x04, 0xe5, -0x06, 0xe5, 0x01, 0x1a, 0x08, 0x09, 0xe5, 0x05, -0x01, 0xe5, 0x09, 0x07, 0x01, 0x07, 0x0b, 0x1b, -0xe5, 0x19, 0x02, 0x02, 0xe5, 0x05, 0x01, 0xe5, -0xe5, 0x06, 0x01, 0xe5, 0x02, 0x01, 0x0b, 0xe5, -0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, 0x19, 0x01, -0x01, 0xe5, 0x15, 0x06, 0xe5, 0x02, 0x03, 0x01, -0x01, 0x01, 0xe5, 0x07, 0x08, 0x02, 0x07, 0x09, -0x09, 0x1b, 0xe7, 0x16, 0x04, 0xe5, 0xe7, 0x03, -0x01, 0xe7, 0xe6, 0x05, 0x01, 0xe5, 0x02, 0x09, -0x01, 0x02, 0x04, 0x04, 0x0b, 0x1a, 0x01, 0xe5, -0x34, 0x01, 0x03, 0x04, 0x01, 0xe6, 0x01, 0xe5, -0x03, 0xe5, 0x02, 0x01, 0x23, 0x01, 0x01, 0xe5, -0x10, 0x01, 0x07, 0x01, 0xe5, 0x05, 0x01, 0x06, -0xe5, 0xe6, 0x05, 0x01, 0x04, 0xe5, 0x02, 0x01, -0x07, 0x01, 0x02, 0xe5, 0x02, 0x01, 0xe5, 0xe5, -0x03, 0x01, 0xe6, 0x04, 0x01, 0x0a, 0x03, 0x16, -0x02, 0xe5, 0x07, 0x06, 0x02, 0xe5, 0x04, 0x02, -0xe5, 0x02, 0x08, 0x01, 0x03, 0x01, 0xe5, 0x08, -0x02, 0x05, 0xe5, 0x01, 0x0a, 0x09, 0x01, 0x01, -0xe5, 0x15, 0x01, 0x05, 0x0c, 0x09, 0xe5, 0xe5, -0x01, 0x03, 0x06, 0x02, 0xe5, 0xe5, 0x02, 0xe5, -0x01, 0x03, 0x01, 0x03, 0x08, 0x09, 0x06, 0xe5, -0xe7, 0x04, 0x1d, 0x01, 0x07, 0x0a, 0xe5, 0x03, -0xe5, 0x05, 0x03, 0x05, 0xe5, 0x01, 0x0c, 0x18, -0xe9, 0x17, 0x05, 0x0a, 0x05, 0x09, 0x06, 0x06, -0x04, 0x07, 0xe6, 0xe5, 0x0e, 0x0b, 0x05, 0xe5, -0xe5, 0x15, 0xe5, 0x07, 0x0e, 0x01, 0x01, 0x0b, -0x04, 0xe5, 0x02, 0x01, 0x05, 0xe6, 0xe5, 0x15, -0x09, 0x02, 0x03, 0xe7, 0x17, 0x12, 0x0d, 0x03, -0x0a, 0x09, 0x01, 0xe5, 0x02, 0x01, 0x1b, 0x01, -0xe5, 0xe5, 0x11, 0x0d, 0x0a, 0xe6, 0x05, 0xe5, -0x02, 0x05, 0xe5, 0x09, 0x01, 0x03, 0x06, 0x04, -0x1b, 0x01, 0xe5, 0xe5, 0x1a, 0x0a, 0x0b, 0x01, -0xe5, 0x05, 0x02, 0xe5, 0x04, 0xe6, 0x08, 0x09, -0x14, 0x08, 0xe5, 0x01, 0x06, 0x11, 0x0c, 0x01, -0x11, 0x04, 0xe5, 0x09, 0x05, 0x08, 0x1f, 0xe5, -0xe7, 0x0a, 0x06, 0x03, 0x02, 0x06, 0x1e, 0x09, -0x07, 0x0c, 0x04, 0x09, 0x0d, 0x02, 0xe5, 0x01, -0x06, 0x09, 0x05, 0x03, 0x04, 0x06, 0x02, 0x10, -0x06, 0x08, 0x03, 0x02, 0x01, 0x01, 0x07, 0x12, -0x04, 0x04, 0x03, 0x18, 0x0d, 0x02, 0x0d, 0x04, -0x05, 0x02, 0x03, 0x03, 0x05, 0x03, 0x05, 0x11, -0x09, 0xe5, 0xe5, 0x1e, 0x05, 0x03, 0x01, 0x17, -0x06, 0x09, 0x05, 0x02, 0xe5, 0x12, 0x07, 0x01, -0x03, 0x06, 0x23, 0x06, 0x04, 0x0b, 0x10, 0x01, -0x08, 0x11, 0x02, 0x02, 0xe5, 0xe6, 0x07, 0x07, -0x14, 0x08, 0x06, 0x18, 0x09, 0x09, 0x09, 0x0e, -0x02, 0xe6, 0x0a, 0x09, 0x09, 0x02, 0xe5, 0x1d, -0xe5, 0x01, 0x01, 0x04, 0xe5, 0x24, 0xe6, 0xe9, -0x01, 0x01, 0x08, 0x09, 0xe6, 0x06, 0xe6, 0xe5, -0x1e, 0x02, 0x01, 0xe5, 0x2a, 0x01, 0x01, 0xe5, -0xe5, 0x03, 0x08, 0x06, 0x01, 0x0a, 0x2c, 0xe5, -0x26, 0x02, 0xe5, 0xe6, 0x01, 0x0a, 0x06, 0xe5, -0x02, 0x04, 0x02, 0x01, 0x27, 0x06, 0xe5, 0x02, -0x1c, 0x02, 0x01, 0xe6, 0xe6, 0x0c, 0x09, 0x01, -0x02, 0x02, 0x01, 0x01, 0x03, 0x02, 0xe5, 0xe5, -0x06, 0x01, 0x15, 0x01, 0xe5, 0xe5, 0xe5, 0x05, -0x02, 0x19, 0xe6, 0xe7, 0x01, 0x0a, 0x03, 0x05, -0x01, 0x02, 0x01, 0x01, 0xe5, 0xe5, 0xe5, 0x03, -0xe5, 0xe5, 0xe5, 0x04, 0x01, 0x01, 0x16, 0x08, -0x02, 0x01, 0x15, 0x02, 0x01, 0xe5, 0x02, 0xe5, -0x03, 0xe5, 0x05, 0x0e, 0x04, 0x01, 0x03, 0xe6, -0xe5, 0xe5, 0x06, 0x01, 0x15, 0x02, 0x0b, 0x1a, -0x02, 0xe5, 0xe6, 0x05, 0x06, 0x0b, 0x07, 0x05, -0xe5, 0x01, 0x01, 0x07, 0x01, 0x18, 0xe6, 0x07, -0xe6, 0x18, 0x01, 0xe6, 0xe6, 0x12, 0x08, 0x0a, -0x02, 0x25, 0x14, 0xe5, 0x0c, 0x02, 0x03, 0x02, -0x0a, 0x09, 0x01, 0x11, 0xe5, 0x31, 0x09, 0xe5, -0x12, 0x02, 0xe5, 0x09, 0x03, 0x05, 0xe5, 0x01, -0x06, 0x02, 0x02, 0x06, 0x09, 0x0b, 0x09, 0x04, -0x01, 0x02, 0x03, 0x05, 0x09, 0x0d, 0xe9, 0x01, -0x12, 0x09, 0xe5, 0x2e, 0x03, 0x26, 0xe5, 0xe5, -0x1e, 0x31, 0x2b, 0xe5, 0xe5, 0x0a, 0x01, 0x09, -0x04, 0x02, 0x06, 0x1f, 0x07, 0x01, 0x0e, 0x1a, -0x01, 0x0d, 0x01, 0xe5, 0x04, 0xe5, 0x01, 0xe5, -0x07, 0x05, 0x03, 0x19, 0x06, 0x07, 0xe5, 0x04, -0x02, 0xe5, 0x17, 0x02, 0x0c, 0x0c, 0x06, 0x3e, -0x1a, 0x01, 0x01, 0x13, 0xe5, 0xe6, 0x04, 0xe6, -0x06, 0xe6, 0x06, 0xe6, 0x08, 0xe5, 0x09, 0xe5, -0x07, 0xe5, 0x07, 0xe6, 0x06, 0xe5, 0x07, 0xe5, -0x06, 0x01, 0xe6, 0x13, 0x05, 0x04, 0x04, 0xe5, -0x02, 0x01, 0x02, 0x03, 0xe5, 0x18, 0x0a, 0xe5, -0x04, 0x1a, 0xe5, 0xe6, 0x15, 0x07, 0x01, 0x09, -0xe5, 0x07, 0x18, 0x11, 0x1b, 0xe5, 0xe5, 0x12, -0x01, 0xe5, 0x02, 0x02, 0x01, 0x07, 0xe6, 0xe5, -0x01, 0x02, 0x01, 0x0c, 0x0c, 0x13, 0x18, 0x01, -0xe6, 0x12, 0x06, 0x01, 0xe6, 0x04, 0x03, 0x02, -0x02, 0x02, 0x1b, 0x02, 0x07, 0x08, 0x18, 0xe5, -0x01, 0x0d, 0xe5, 0xe5, 0x05, 0x01, 0xe5, 0x02, -0x02, 0x03, 0x0a, 0x02, 0x17, 0x02, 0x03, 0x05, -0x0e, 0x11, 0x02, 0x01, 0x0a, 0x06, 0x01, 0xe5, -0x01, 0x03, 0x01, 0x04, 0x02, 0x01, 0x07, 0x01, -0x01, 0x05, 0x01, 0x02, 0x01, 0x04, 0x01, 0x01, -0x05, 0x01, 0x07, 0x01, 0x02, 0x04, 0xe6, 0x06, -0x01, 0x0b, 0x02, 0x09, 0x04, 0x0a, 0x09, 0xe5, -0x01, 0x05, 0xe5, 0x13, 0xe5, 0x01, 0x03, 0xe5, -0x01, 0x05, 0x05, 0x1e, 0x01, 0x01, 0xe5, 0xe5, -0x01, 0x0b, 0x04, 0x05, 0x04, 0x01, 0x05, 0x03, -0x12, 0xe5, 0xe5, 0x0b, 0x01, 0x06, 0x01, 0x1d, -0x02, 0x01, 0x0b, 0x0d, 0x11, 0x0e, 0x04, 0x09, -0x30, 0x03, 0xe5, 0x03, 0x02, 0x04, 0x01, 0x02, -0x01, 0xe5, 0xe7, 0x04, 0x01, 0x01, 0x07, 0x01, -0x0a, 0x0b, 0x08, 0x09, 0xe5, 0x05, 0x01, 0xe5, -0x11, 0x05, 0x02, 0x02, 0x02, 0x09, 0x03, 0x04, -0x0a, 0x0a, 0x02, 0x01, 0x07, 0x03, 0x11, 0x01, -0x01, 0x05, 0x05, 0x0d, 0x06, 0x02, 0xe5, 0xe5, -0xe6, 0x0b, 0x08, 0x06, 0xe8, 0xe5, 0x03, 0xe5, -0xe5, 0xe5, 0x10, 0x04, 0x04, 0x01, 0x0a, 0xe5, -0x01, 0x04, 0xe6, 0x16, 0x02, 0x01, 0x05, 0x0a, -0x06, 0x02, 0x02, 0x04, 0x01, 0x15, 0x04, 0x05, -0x04, 0x0a, 0x01, 0x21, 0x03, 0xe5, 0x05, 0x12, -0x04, 0x07, 0x07, 0x10, 0x12, 0x27, 0xe8, 0x02, -0x08, 0x0f, 0x16, 0x08, 0x02, 0x0a, 0x05, 0x03, -0x07, 0x1c, 0xe6, 0xe6, 0xe5, 0x11, 0x1a, 0x01, -0x02, 0x08, 0x01, 0x06, 0x1c, 0x16, 0xe5, 0xe6, -0x08, 0xe5, 0x07, 0x0c, 0x02, 0xe5, 0x07, 0x09, -0x10, 0x08, 0x05, 0xe5, 0x03, 0x01, 0x01, 0x17, -0x01, 0xe7, 0x18, 0x08, 0xe5, 0x02, 0x05, 0x08, -0xe5, 0x07, 0x16, 0x05, 0xe5, 0x01, 0x01, 0x18, -0xe6, 0x18, 0x08, 0x08, 0xe5, 0x09, 0x17, 0x01, -0x03, 0xe5, 0x08, 0x16, 0x03, 0x02, 0x03, 0x09, -0x09, 0x13, 0x04, 0x20, 0xe5, 0x01, 0x02, 0x06, -0x17, 0xe5, 0x01, 0x01, 0xe6, 0x0b, 0x0b, 0x02, -0x0b, 0x01, 0xe7, 0x22, 0xe5, 0x02, 0x09, 0x14, -0x01, 0x01, 0x03, 0xe5, 0x0c, 0x05, 0xe5, 0x0e, -0x02, 0xe5, 0x04, 0x22, 0xe5, 0x03, 0x07, 0x0f, -0xe5, 0x03, 0x01, 0x04, 0x01, 0xe5, 0xe5, 0x01, -0x07, 0x19, 0xe5, 0x01, 0x01, 0xe5, 0x22, 0x04, -0x04, 0xe5, 0xe5, 0x0e, 0xe5, 0x05, 0x02, 0x01, -0x01, 0xe5, 0x0b, 0x12, 0xe5, 0x02, 0x05, 0x01, -0x02, 0xe5, 0x01, 0x1e, 0x01, 0x02, 0x1f, 0xeb, -0xe5, 0x09, 0x03, 0x09, 0x01, 0x01, 0xe6, 0x08, -0x01, 0x04, 0x01, 0x20, 0x02, 0x06, 0x01, 0x01, -0x01, 0x02, 0x0e, 0x05, 0xe6, 0x0b, 0x13, 0x09, -0x01, 0x27, 0x01, 0x04, 0x04, 0x15, 0x04, 0xe7, -0x0b, 0x13, 0x06, 0x01, 0xe5, 0xe5, 0xe5, 0x2b, -0xe5, 0x02, 0x1a, 0xe6, 0x1c, 0x02, 0x05, 0xe5, -0x07, 0xe5, 0x01, 0x06, 0x1c, 0x02, 0x01, 0xe5, -0x05, 0x02, 0x0b, 0x04, 0xe5, 0x02, 0x0a, 0x13, -0x06, 0x02, 0x01, 0x05, 0x01, 0x0b, 0x1d, 0x1d, -0x01, 0xe7, 0x09, 0x03, 0x02, 0x06, 0x02, 0x02, -0x03, 0x03, 0x05, 0xe5, 0xe5, 0xe7, 0x01, 0x0b, -0x09, 0x04, 0x01, 0x02, 0x02, 0x01, 0xe6, 0x01, -0x02, 0x06, 0x0d, 0x01, 0xe7, 0x15, 0x09, 0x05, -0x03, 0x09, 0x1f, 0x09, 0x1b, 0xe8, 0x14, 0x09, -0x08, 0x08, 0x20, 0x08, 0x1e, 0xe5, 0x01, 0x16, -0xe5, 0xe5, 0x06, 0x01, 0x06, 0xe5, 0x07, 0x20, -0x01, 0xe6, 0x04, 0x01, 0x19, 0x01, 0xe5, 0x01, -0x14, 0x01, 0xe5, 0x05, 0x01, 0x01, 0x01, 0x06, -0xe5, 0x07, 0x1c, 0x08, 0xe5, 0x01, 0x17, 0xe6, -0xe6, 0x15, 0x01, 0x04, 0x40, 0x01, 0x18, 0xe8, -0x14, 0xe5, 0x01, 0x05, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x09, 0xe5, 0x07, 0xe6, 0x01, -0x04, 0xe6, 0xe5, 0x04, 0xe5, 0x07, 0xe5, 0x06, -0x02, 0xe5, 0x16, 0x01, 0x07, 0x01, 0x57, 0xe7, -0x03, 0x12, 0x01, 0x07, 0x01, 0x13, 0x1f, 0x07, -0x1c, 0xe6, 0x16, 0x01, 0x26, 0x14, 0x01, 0x07, -0x1c, 0x01, 0x04, 0x12, 0x01, 0x07, 0x04, 0x09, -0x26, 0x07, 0x15, 0x01, 0x04, 0xe6, 0x0c, 0x01, -0xe5, 0x09, 0x05, 0xe5, 0xe5, 0x13, 0x1b, 0x06, -0x02, 0x10, 0x04, 0x03, 0xe6, 0xe6, 0x02, 0xe5, -0x06, 0x01, 0x02, 0x01, 0xe5, 0x05, 0x01, 0x04, -0x02, 0xe6, 0x06, 0x01, 0x01, 0x05, 0x01, 0x04, -0x04, 0x01, 0x02, 0x04, 0x01, 0x04, 0x02, 0x01, -0x01, 0x02, 0x02, 0x01, 0x07, 0x01, 0x01, 0x04, -0x05, 0xe6, 0x02, 0x12, 0x0e, 0x07, 0x03, 0x0c, -0x08, 0x0c, 0x06, 0x1e, 0x01, 0xe7, 0x1d, 0x08, -0x01, 0x0e, 0x24, 0x13, 0x06, 0xe5, 0xe5, 0xe5, -0x14, 0x09, 0xe5, 0x07, 0xe5, 0x01, 0x01, 0x0a, -0x02, 0x01, 0x05, 0x34, 0xe9, 0xe5, 0x01, 0x02, -0x0e, 0x01, 0x07, 0x01, 0xe5, 0x05, 0xe7, 0x01, -0xe5, 0x01, 0x0f, 0x0f, 0x09, 0x15, 0x07, 0xe5, -0x16, 0x01, 0x0a, 0x03, 0x03, 0x06, 0x03, 0x02, -0x04, 0x13, 0x03, 0x09, 0x03, 0x10, 0x02, 0x01, -0xe5, 0xe6, 0x18, 0x06, 0x0b, 0xe6, 0x07, 0x06, -0x06, 0x07, 0x0e, 0x1b, 0xe9, 0x0f, 0x05, 0x04, -0x08, 0x06, 0xe5, 0x04, 0x05, 0x02, 0x03, 0x14, -0x04, 0x03, 0x1b, 0x01, 0x02, 0x11, 0x0a, 0xe5, -0x07, 0x06, 0x11, 0xe5, 0x39, 0x02, 0x0d, 0xe5, -0x0b, 0x03, 0x0c, 0x10, 0x01, 0x39, 0x01, 0xe5, -0xe5, 0x0c, 0x02, 0x05, 0x04, 0x10, 0x05, 0xe5, -0x0a, 0x3a, 0xe5, 0xe6, 0x01, 0x16, 0x0d, 0x02, -0x06, 0x05, 0xe5, 0x06, 0xe5, 0xe5, 0x0e, 0x25, -0xe5, 0x01, 0xe5, 0x1b, 0x09, 0xe5, 0x04, 0x08, -0xe5, 0x07, 0x02, 0x19, 0x11, 0x0b, 0x02, 0x17, -0x15, 0x06, 0x02, 0x0a, 0x3a, 0xe7, 0x11, 0xe5, -0x04, 0x0f, 0x4b, 0xe5, 0x02, 0xe6, 0x01, 0x01, -0x0e, 0xe5, 0x05, 0x0f, 0xe6, 0x11, 0x34, 0x01, -0x01, 0x03, 0xe5, 0x03, 0x05, 0x01, 0xe5, 0xe5, -0x03, 0xe5, 0xe5, 0xe6, 0x0f, 0x01, 0x04, 0x01, -0xe5, 0x01, 0x03, 0xe5, 0x02, 0x04, 0x28, 0xe5, -0x03, 0x01, 0x03, 0x02, 0x02, 0x07, 0x02, 0x01, -0x04, 0xe5, 0xe5, 0xe6, 0x0c, 0xe5, 0xe5, 0xe5, -0x03, 0xe5, 0x02, 0x04, 0x32, 0xe5, 0x05, 0x02, -0x01, 0x01, 0x0b, 0x01, 0x01, 0x02, 0x04, 0x21, -0xe5, 0x01, 0xe5, 0xe5, 0x05, 0x02, 0x2d, 0xe7, -0xe6, 0x01, 0x0a, 0x01, 0x02, 0x04, 0x13, 0x01, -0x01, 0x01, 0x02, 0x05, 0x02, 0xe5, 0x05, 0x2e, -0x02, 0x03, 0x01, 0xe6, 0x17, 0x11, 0x01, 0x07, -0x07, 0x03, 0x35, 0x02, 0xe8, 0x11, 0x06, 0x11, -0x01, 0x09, 0x03, 0xe5, 0x3d, 0x01, 0xe5, 0x11, -0x09, 0x14, 0x02, 0x05, 0x3e, 0xe7, 0xe5, 0x1a, -0xe5, 0x1e, 0x3d, 0xe5, 0x01, 0xe5, 0x0a, 0x02, -0x09, 0x09, 0x09, 0x06, 0x02, 0x03, 0x02, 0x04, -0x09, 0x09, 0x09, 0x09, 0x0d, 0xe9, 0x01, 0x08, -0xe5, 0x04, 0x09, 0x14, 0x02, 0x05, 0x02, 0xe5, -0x3a, 0xe5, 0xe6, 0x0a, 0x26, 0x08, 0x40, 0xe6, -0x0c, 0x04, 0x04, 0x01, 0x02, 0x15, 0x0b, 0x04, -0x36, 0xe8, 0x0e, 0x01, 0x02, 0x02, 0x01, 0xe6, -0xe5, 0x0f, 0x0a, 0x09, 0xe5, 0x35, 0xe8, 0x08, -0x02, 0x09, 0x01, 0x10, 0x07, 0x08, 0x07, 0x2e, -0x08, 0xe7, 0x0e, 0x05, 0xe6, 0xe5, 0x04, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x09, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x09, 0xe5, 0x0c, 0x09, 0x01, 0x14, 0x14, 0x36, -0x02, 0xe5, 0x0e, 0x07, 0x16, 0x4d, 0x01, 0xe5, -0x0b, 0x09, 0x01, 0x11, 0x0b, 0x01, 0x06, 0x02, -0x36, 0xe5, 0xe6, 0x02, 0x0b, 0x02, 0x04, 0x04, -0x0e, 0x02, 0x11, 0x39, 0xe5, 0x01, 0x2b, 0x15, -0x01, 0xe5, 0x20, 0x12, 0xe5, 0xe7, 0x10, 0x01, -0x02, 0x03, 0xe5, 0xe5, 0x06, 0x01, 0x02, 0x04, -0x01, 0x07, 0x01, 0x05, 0x03, 0x01, 0x07, 0x01, -0x07, 0x01, 0x07, 0x01, 0x07, 0x01, 0x0b, 0xe5, -0xe5, 0x18, 0x12, 0x02, 0x09, 0x21, 0x01, 0x1c, -0xe6, 0xe6, 0x13, 0x1c, 0x0b, 0x01, 0x13, 0x24, -0xe5, 0x01, 0xe5, 0x18, 0x14, 0x10, 0x3b, 0x02, -0x17, 0x01, 0x0e, 0x02, 0x01, 0x07, 0xe5, 0x09, -0x01, 0x16, 0x1a, 0x05, 0x02, 0x17, 0x01, 0x13, -0x0d, 0x03, 0x04, 0x03, 0x10, 0x1c, 0x02, 0x02, -0xe6, 0x19, 0x09, 0x06, 0x05, 0x0f, 0x37, 0x01, -0xe7, 0x25, 0x04, 0x01, 0x11, 0x08, 0x10, 0x1f, -0x02, 0x01, 0x26, 0x08, 0x0f, 0x06, 0x33, 0x01, -0x01, 0x0a, 0x10, 0x0f, 0x13, 0x07, 0x31, 0x02, -0xe6, 0x11, 0x16, 0x01, 0x03, 0x0f, 0x3b, 0x02, -0x14, 0x01, 0x16, 0xe5, 0x0c, 0x28, 0x13, 0x04, -0xe5, 0x2b, 0x0a, 0x36, 0x0a, 0x01, 0x01, 0x2b, -0xe5, 0x0d, 0x3e, 0xe8, 0xe5, 0x75, 0xe5, 0x03, -0x02, 0x01, 0x28, 0x47, 0x01, 0x02, 0xe6, 0xe5, -0x03, 0x23, 0x01, 0x4a, 0x04, 0xe5, 0x01, 0x02, -0x74, 0x02, 0xe6, 0xe6, 0x04, 0x05, 0x21, 0x01, -0x01, 0x01, 0x45, 0x01, 0xe6, 0x01, 0x08, 0x25, -0x02, 0x3f, 0x02, 0x05, 0xe6, 0x72, 0x04, 0xe5, -0xe5, 0xe5, 0x01, 0x2c, 0x4a, 0x03, 0xe6, 0x2d, -0x43, 0x06, 0x01, 0xe5, 0x7a, 0xe8, 0x0d, 0x09, -0x09, 0x09, 0x09, 0x0b, 0x09, 0x09, 0x09, 0x09, -0x0d, 0x03, 0xe5, 0x01, 0x27, 0x4c, 0x06, 0x29, -0x52, 0x01, 0x2d, 0xe5, 0x48, 0x03, 0x01, 0x16, -0x03, 0x14, 0x4a, 0xe6, 0xe5, 0x2c, 0x03, 0x4a, -0xe6, 0x03, 0x10, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x09, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x06, 0x02, -0xe5, 0x16, 0x01, 0x13, 0x4c, 0x03, 0x17, 0x01, -0x63, 0xe6, 0x15, 0x01, 0x13, 0x12, 0x39, 0x03, -0x03, 0x13, 0x01, 0x16, 0x49, 0xe5, 0xe6, 0x2a, -0x01, 0xe5, 0x49, 0x02, 0xe6, 0x10, 0x01, 0x01, -0x05, 0x01, 0x02, 0x03, 0xe5, 0xe5, 0x02, 0x03, -0x01, 0x01, 0x05, 0x01, 0x01, 0x02, 0x03, 0xe5, -0xe5, 0x06, 0x01, 0x07, 0x01, 0x07, 0x01, 0x07, -0x01, 0x0a, 0xe5, 0x01, 0x5b, 0x22, 0xe5, 0x09, -0x34, 0x07, 0x09, 0x0b, 0x1a, 0x02, 0x01, 0x3f, -0x3a, 0xe6, 0xe5, 0x16, 0x10, 0x17, 0x07, 0x2b, -0x08, 0xe5, 0x19, 0x16, 0x09, 0x03, 0x3b, 0xe7, -0x23, 0x1a, 0x04, 0xe5, 0x33, 0x01, 0xe6, 0x1b, -0x22, 0x0a, 0x0d, 0x23, 0x01, 0x3f, 0x3c, 0xe6, -0x20, 0xe6, 0x15, 0x04, 0x2a, 0x09, 0x06, 0xe5, -0xe5, 0x23, 0x1a, 0xe5, 0x28, 0x0f, 0x02, 0xe5, -0x38, 0x41, 0xe5, 0xe6, 0xe5, 0x24, 0x04, 0x1a, -0x30, 0x01, 0xe5, 0xe5, 0x2c, 0x4c, 0xe5, 0x01, -0xe6, 0x75, 0xe8, 0xe5, 0x01, 0x01, 0x70, 0x01, -0x03, 0xe5, 0xe5, 0x03, 0x70, 0x04, 0xe5, 0x01, -0x02, 0x74, 0x02, 0x01, 0xe6, 0x01, 0x78, 0x02, -0x74, 0x02, 0x02, 0xe8, 0x13, 0x5f, 0x04, 0x03, -0xe5, 0x13, 0xe5, 0x63, 0x01, 0xe6, 0x08, 0x02, -0x08, 0x64, 0xe5, 0x01, 0x0a, 0xe5, 0x6e, 0xe5, -0xe6, 0x0d, 0x09, 0x09, 0x09, 0x09, 0x0b, 0x09, -0x09, 0x09, 0x09, 0x0d, 0xe9, 0x01, 0x74, 0x06, -0x7a, 0x03, 0x01, 0x2b, 0x4d, 0xe5, 0xe5, 0x23, -0x08, 0xe5, 0x47, 0x02, 0xe8, 0x2c, 0x4b, 0xe5, -0x01, 0xe5, 0x12, 0x01, 0x07, 0xe6, 0x07, 0xe5, -0x02, 0x03, 0x01, 0x09, 0xe5, 0x09, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x06, -0x01, 0xe6, 0x0f, 0xe5, 0x02, 0x09, 0x01, 0x01, -0xe5, 0x03, 0x03, 0x03, 0x01, 0x38, 0x0b, 0x01, -0x01, 0x01, 0x13, 0x02, 0x09, 0xe5, 0xe6, 0x02, -0x01, 0x02, 0x06, 0x37, 0x0d, 0x01, 0x01, 0x15, -0x07, 0xe6, 0xe5, 0xe5, 0x04, 0x03, 0x05, 0x47, -0xe5, 0xe5, 0x0f, 0x02, 0xe5, 0x07, 0xe5, 0x01, -0x01, 0xe5, 0x01, 0xe5, 0x03, 0x03, 0xe5, 0x38, -0x0e, 0x01, 0xe5, 0x2e, 0x33, 0x15, 0xe5, 0xe5, -0xe5, 0x10, 0x01, 0x07, 0x01, 0x07, 0x01, 0xe5, -0xe5, 0x03, 0x01, 0xe5, 0xe5, 0x02, 0xe5, 0xe6, -0x07, 0x01, 0xe5, 0x05, 0x01, 0xe6, 0x04, 0xe7, -0x05, 0x01, 0x07, 0x01, 0x0b, 0xe7, 0x3d, 0x15, -0x21, 0x03, 0x03, 0xe5, 0x3e, 0x38, 0xe5, 0xe5, -0xe5, 0x12, 0x02, 0x09, 0x1e, 0x07, 0x32, 0x03, -0xe5, 0x19, 0x05, 0x01, 0x0a, 0x09, 0x06, 0x3a, -0xe5, 0x01, 0x23, 0x03, 0x17, 0x3a, 0x03, 0xe5, -0x1f, 0x1d, 0x16, 0xe5, 0x24, 0xe5, 0x1e, 0x09, -0x12, 0x02, 0x15, 0x01, 0x23, 0xe7, 0x3e, 0x23, -0x17, 0x01, 0xe5, 0x3e, 0x3c, 0xe6, 0x24, 0x19, -0x3d, 0xe6, 0x1b, 0xe5, 0x04, 0x02, 0xe5, 0x08, -0x38, 0x12, 0x33, 0x36, 0xe6, 0x0b, 0x01, 0xe5, -0xe5, 0x6a, 0x10, 0xe6, 0x02, 0x0b, 0xe5, 0xe5, -0x05, 0xe5, 0x07, 0xe5, 0x07, 0xe6, 0x06, 0xe5, -0x07, 0xe7, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x0b, 0x03, 0xe5, 0x0f, 0x09, 0x09, -0x09, 0x09, 0x04, 0x04, 0x01, 0x09, 0x09, 0x09, -0x01, 0x07, 0x0d, 0xe5, 0xe6, 0x0e, 0x09, 0x03, -0x05, 0x09, 0x09, 0x04, 0x06, 0x04, 0x04, 0x04, -0x04, 0x04, 0x04, 0x09, 0x0e, 0x03, 0x26, 0x57, -0x0f, 0x09, 0x09, 0x09, 0x09, 0x0b, 0x01, 0x07, -0x09, 0x09, 0x02, 0x06, 0x0e, 0xe5, 0xe6, 0x0c, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x09, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x0e, 0x03, 0x03, 0x09, 0x09, -0x09, 0x09, 0x09, 0x0b, 0x09, 0x09, 0x09, 0x09, -0x12, 0xe6, 0x0d, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, -0x05, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, -0xe5, 0x07, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, -0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, -0x0b, 0x03, 0x0e, 0x09, 0x09, 0x09, 0x09, 0x03, -0x07, 0x09, 0x09, 0x09, 0x09, 0x0f, 0x02, 0xe5, -0x79, 0xe5, 0x01, 0x0e, 0x09, 0x09, 0x09, 0x09, -0x08, 0x02, 0x09, 0x09, 0x09, 0x09, 0x11, 0xe6, -0x3e, 0x3b, 0x02, 0x10, 0x09, 0x09, 0x09, 0x09, -0x0b, 0x09, 0x09, 0x09, 0x09, 0x10, 0xe5, 0x7d, -0x3f, 0x3a, 0xe5, 0x01, 0x3f, 0x36, 0x04, 0x02, -0x7a, 0x01, 0x01, 0x13, 0x3d, 0x28, 0x01, 0x01, -0x3f, 0x33, 0x0a, 0x3f, 0x34, 0x08, 0xe5, 0x79, -0x01, 0x01, 0x14, 0x09, 0x09, 0x09, 0x09, 0x0b, -0x09, 0x09, 0x09, 0x09, 0x09, 0xe5, 0x01, 0x0f, -0x09, 0x09, 0x09, 0x09, 0x07, 0x03, 0x09, 0x09, -0x09, 0x08, 0xe5, 0x0d, 0x03, 0x3a, 0x04, 0x3a, -0x02, 0xe5, 0x0c, 0x09, 0x03, 0x05, 0x09, 0x09, -0x03, 0x07, 0x09, 0x09, 0x07, 0x01, 0x1b, 0x01, -0xe5, 0x0a, 0x02, 0x07, 0x05, 0x03, 0x01, 0x03, -0x03, 0x01, 0x03, 0x03, 0x09, 0x06, 0xe5, 0x02, -0x04, 0x04, 0x04, 0x02, 0x06, 0xe5, 0x02, 0x02, -0x06, 0x02, 0xe5, 0x02, 0x03, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c index 91b4063ed1..cbdcfe33c5 100644 --- a/board/esd/cpci750/mv_eth.c +++ b/board/esd/cpci750/mv_eth.c @@ -5,7 +5,7 @@ * based on - Driver for MV64360X ethernet ports * Copyright (C) 2002 rabeeh@galileo.co.il * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 */ /* @@ -1025,21 +1025,6 @@ bool db64360_eth_start (struct eth_device *dev) * based on Linux code * arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports * Copyright (C) 2002 rabeeh@galileo.co.il - - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ /******************************************************************************** diff --git a/board/esd/pci405/writeibm.S b/board/esd/pci405/writeibm.S index 5925bc6ec0..38acca12bf 100644 --- a/board/esd/pci405/writeibm.S +++ b/board/esd/pci405/writeibm.S @@ -1,28 +1,6 @@ -/*------------------------------------------------------------------------------+ */ -/* */ -/* This source code is dual-licensed. You may use it under the terms */ -/* of the GNU General Public License version 2, or under the license */ -/* below. */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------------- */ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ /* Description: Initializes the External Bus Controller for the external */ diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 86e44eae0b..f74651c520 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -21,12 +21,14 @@ #include "../common/qixis.h" #include "../common/vsc3316_3308.h" +#include "../common/idt8t49n222a_serdes_clk.h" #include "b4860qds.h" #include "b4860qds_qixis.h" #include "b4860qds_crossbar_con.h" #define CLK_MUX_SEL_MASK 0x4 #define ETH_PHY_CLK_OUT 0x4 +#define PLL_NUM 2 DECLARE_GLOBAL_DATA_PTR; @@ -35,8 +37,6 @@ int checkboard(void) char buf[64]; u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - unsigned int i; static const char *const freq[] = {"100", "125", "156.25", "161.13", "122.88", "122.88", "122.88"}; int clock; @@ -61,19 +61,6 @@ int checkboard(void) /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could @@ -252,6 +239,106 @@ int configure_vsc3316_3308(void) return 0; } +int config_serdes1_refclks(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 serdes1_prtcl, lane; + unsigned int flag_sgmii_prtcl = 0; + int ret, i; + + serdes1_prtcl = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + if (!serdes1_prtcl) { + printf("SERDES1 is not enabled\n"); + return -1; + } + serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl); + + /* Clear SRDS_RSTCTL_RST bit for both PLLs before changing refclks + */ + for (i = 0; i < PLL_NUM; i++) + clrbits_be32(&srds_regs->bank[i].rstctl, SRDS_RSTCTL_RST); + /* Reconfigure IDT idt8t49n222a device for CPRI to work + * For this SerDes1's Refclk1 and refclk2 need to be set + * to 122.88MHz + */ + switch (serdes1_prtcl) { + case 0x2A: + case 0x2C: + case 0x2D: + case 0x2E: + debug("Configuring idt8t49n222a for CPRI SerDes clks:" + " for srds_prctl:%x\n", serdes1_prtcl); + ret = select_i2c_ch_pca(I2C_CH_IDT); + if (!ret) { + ret = set_serdes_refclk(IDT_SERDES1_ADDRESS, 1, + SERDES_REFCLK_122_88, + SERDES_REFCLK_122_88, 0); + if (ret) { + printf("IDT8T49N222A configuration failed.\n"); + return ret; + } else + printf("IDT8T49N222A configured.\n"); + } else { + return ret; + } + select_i2c_ch_pca(I2C_CH_DEFAULT); + + /* Change SerDes1's Refclk1 to 125MHz for on board + * SGMIIs to work + */ + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl + (0, serdes1_prtcl, lane); + switch (lane_prtcl) { + case SGMII_FM1_DTSEC1: + case SGMII_FM1_DTSEC2: + case SGMII_FM1_DTSEC3: + case SGMII_FM1_DTSEC4: + case SGMII_FM1_DTSEC5: + case SGMII_FM1_DTSEC6: + flag_sgmii_prtcl++; + break; + default: + break; + } + } + + if (flag_sgmii_prtcl) + QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); + + /* Steps For SerDes PLLs reset and reconfiguration after + * changing SerDes's refclks + */ + for (i = 0; i < PLL_NUM; i++) { + debug("For PLL%d reset and reconfiguration after" + " changing refclks\n", i+1); + clrbits_be32(&srds_regs->bank[i].rstctl, + SRDS_RSTCTL_SDRST_B); + udelay(10); + clrbits_be32(&srds_regs->bank[i].rstctl, + (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B)); + udelay(10); + setbits_be32(&srds_regs->bank[i].rstctl, + SRDS_RSTCTL_RST); + setbits_be32(&srds_regs->bank[i].rstctl, + (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B + | SRDS_RSTCTL_SDRST_B)); + } + break; + default: + printf("WARNING:IDT8T49N222A configuration not" + " supported for:%x SerDes1 Protocol.\n", + serdes1_prtcl); + return -1; + } + + return 0; +} + int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; @@ -277,6 +364,16 @@ int board_early_init_r(void) #ifdef CONFIG_SYS_DPAA_QBMAN setup_portals(); #endif + /* SerDes1 refclks need to be set again, as default clks + * are not suitable for CPRI and onboard SGMIIs to work + * simultaneously. + * This function will set SerDes1's Refclk1 and refclk2 + * as per SerDes1 protocols + */ + if (config_serdes1_refclks()) + printf("SerDes1 Refclks couldn't set properly.\n"); + else + printf("SerDes1 Refclks have been set.\n"); /* Configure VSC3316 and VSC3308 crossbar switches */ if (configure_vsc3316_3308()) diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h index 6e64745b0f..db0cf28fff 100644 --- a/board/freescale/b4860qds/b4860qds_crossbar_con.h +++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h @@ -13,10 +13,10 @@ static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10}, {5, 11}, {4, 5}, {2, 6}, {12, 9} }; -static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, +static int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; -static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1}, +static int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, {2, 14}, {12, 15}, {-1, -1}, {-1, -1} }; @@ -25,7 +25,7 @@ static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1}, {-1, -1}, {-1, -1} }; #ifdef CONFIG_PPC_B4420 -static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15}, +static int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; #endif @@ -35,10 +35,10 @@ static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1}, static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9}, {11, 11}, {5, 10}, {6, 3}, {9, 12} }; -static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, +static int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; -static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1}, +static int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, {14, 3}, {15, 12}, {-1, -1}, {-1, -1} }; @@ -47,7 +47,7 @@ static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1}, {-1, -1}, {-1, -1} }; #ifdef CONFIG_PPC_B4420 -static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10}, +static int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; #endif diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 19ca66e3d0..dc4ef80fc8 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -201,8 +201,6 @@ int board_eth_init(bd_t *bis) debug("Setting phy addresses for FM1_DTSEC5: %x and" "FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR); - /* Fixing Serdes clock by programming FPGA register */ - QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c index a4161ad649..c82fe0aab3 100644 --- a/board/freescale/bsc9131rdb/ddr.c +++ b/board/freescale/bsc9131rdb/ddr.c @@ -87,7 +87,7 @@ phys_size_t fixed_sdram(void) } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index 457489416a..a895e4e297 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -125,6 +125,27 @@ void board_config_serdes_mux(void) } } +/* Configure DSP DDR controller */ +void dsp_ddr_configure(void) +{ + /* + *There are separate DDR-controllers for DSP and PowerPC side DDR. + *copy the ddr controller settings from PowerPC side DDR controller + *to the DSP DDR controller as connected DDR memories are similar. + */ + ccsr_ddr_t __iomem *pa_ddr = + (ccsr_ddr_t __iomem *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ccsr_ddr_t temp_ddr; + ccsr_ddr_t __iomem *dsp_ddr = + (ccsr_ddr_t __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; + + memcpy(&temp_ddr, pa_ddr, sizeof(ccsr_ddr_t)); + temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS; + temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN; + memcpy(dsp_ddr, &temp_ddr, sizeof(ccsr_ddr_t)); + dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN; +} + int board_early_init_r(void) { #ifndef CONFIG_SYS_NO_FLASH @@ -153,6 +174,7 @@ int board_early_init_r(void) 0, flash_esel+1, BOOKE_PAGESZ_64M, 1); #endif board_config_serdes_mux(); + dsp_ddr_configure(); return 0; } diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c index 05bea8ad52..fdea193129 100644 --- a/board/freescale/bsc9132qds/ddr.c +++ b/board/freescale/bsc9132qds/ddr.c @@ -109,7 +109,7 @@ phys_size_t fixed_sdram(void) strmhz(buf, ddr_freq)); ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c index fed2edf44a..e10de9adcf 100644 --- a/board/freescale/bsc9132qds/law.c +++ b/board/freescale/bsc9132qds/law.c @@ -16,6 +16,14 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_FPGA_BASE_PHYS SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), #endif + SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M, + LAW_TRGT_IF_DSP_CCSR), + SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_32M, + LAW_TRGT_IF_OCN_DSP), + SET_LAW(CONFIG_SYS_FSL_DSP_M3_RAM_ADDR, LAW_SIZE_32K, + LAW_TRGT_IF_CLASS_DSP), + SET_LAW(CONFIG_SYS_FSL_DSP_DDR_ADDR, LAW_SIZE_1G, + LAW_TRGT_IF_CLASS_DSP) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c index 6d82353416..02655e9baf 100644 --- a/board/freescale/bsc9132qds/tlb.c +++ b/board/freescale/bsc9132qds/tlb.c @@ -41,6 +41,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), + /* CCSRBAR (DSP) */ + SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR, + CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR, + MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1), + #ifndef CONFIG_SPL_BUILD SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, diff --git a/board/esd/canbt/Makefile b/board/freescale/c29xpcie/Makefile index e5caf2331a..ab8eb8f729 100644 --- a/board/esd/canbt/Makefile +++ b/board/freescale/c29xpcie/Makefile @@ -1,24 +1,23 @@ # -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright 2013 Freescale Semiconductor, Inc. # # SPDX-License-Identifier: GPL-2.0+ -# include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS-y += $(BOARD).o +COBJS-y += cpld.o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README new file mode 100644 index 0000000000..430f08244a --- /dev/null +++ b/board/freescale/c29xpcie/README @@ -0,0 +1,100 @@ +Overview +========= +C29XPCIE board is a series of Freescale PCIe add-in cards to perform +as public key crypto accelerator or secure key management module. +It includes C293PCIE board, C293PCIE board and C291PCIE board. +The Freescale C29x family is a high performance crypto co-processor. +It combines a single e500v2 core with necessary SEC engines. +(maximum core frequency 1000/1200 MHz). + +The C29xPCIE board features are as follows: +Memory subsystem: + - 512Mbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus) + - 64 Mbyte NOR flash single-chip memory + - 4 Gbyte NAND flash memory + - 1 Mbit AT24C1024 I2C EEPROM + - 16 Mbyte SPI memory + +Interfaces: + - 10/100/1000 BaseT Ethernet ports: + - eTSEC1, RGMII: one 10/100/1000 port + - eTSEC2, RGMII: one 10/100/1000 port + - DUART interface: + - DUART interface: supports two UARTs up to 115200 bps for + console display + +Board connectors: + - Mini-ITX power supply connector + - JTAG/COP for debugging + +Physical Memory Map on C29xPCIE +=============================== +Address Start Address End Memory type +0x0_0000_0000 - 0x0_1fff_ffff 512MB DDR +0xc_0000_0000 - 0xc_8fff_ffff 256MB PCIE memory +0xf_ec00_0000 - 0xf_efff_ffff 64MB NOR flash +0xf_ffb0_0000 - 0xf_ffb7_ffff 512KB SRAM +0xf_ffc0_0000 - 0xf_ffc0_ffff 64KB PCIE IO +0xf_ffdf_0000 - 0xf_ffdf_0fff 4KB CPLD +0xf_ffe0_0000 - 0xf_ffef_ffff 1MB CCSR + +Serial Port Configuration on C29xPCIE +===================================== +Configure the serial port of the attached computer with the following values: + -Data rate: 115200 bps + -Number of data bits: 8 + -Parity: None + -Number of Stop bits: 1 + -Flow Control: Hardware/None + +Settings of DIP-switch +====================== + SW5[1:4]= 1111 and SW5[6]=0 for boot from 16bit NOR flash + SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash +Note: 1 stands for 'off', 0 stands for 'on' + +Build and program u-boot to NOR flash +================================== +1. Build u-boot.bin image example: + export ARCH=powerpc + export CROSS_COMPILE=/your_path/powerpc-linux-gnu- + make C293PCIE + +2. Program u-boot.bin into NOR flash + => tftp $loadaddr $uboot + => protect off eff80000 +$filesize + => erase eff80000 +$filesize + => cp.b $loadaddr eff80000 $filesize + +3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on. + +Alternate NOR bank +================== +There are four banks in C29XPCIE board, example to change bank booting: +1. Program u-boot.bin into alternate NOR bank + => tftp $loadaddr $uboot + => protect off e9f80000 +$filesize + => erase e9f80000 +$filesize + => cp.b $loadaddr e9f80000 $filesize + +2. Switch to alternate NOR bank + => cpld_cmd reset altbank [bank] + - [bank] bank value select 1-4 + - bank 1 on the flash 0x0000000~0x0ffffff + - bank 2 on the flash 0x1000000~0x1ffffff + - bank 3 on the flash 0x2000000~0x2ffffff + - bank 4 on the flash 0x3000000~0x3ffffff + or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again. + +Build and program u-boot to SPI flash +================================== +1. Build u-boot-spi.bin image + make C29xPCIE_SPIFLASH_config; make + Need the boot_format tool to generate u-boot-spi.bin from the u-boot.bin. + +2. Program u-boot-spi.bin into SPI flash + => tftp $loadaddr $uboot-spi + => sf erase 0 100000 + => sf write $loadaddr 0 $filesize + +3. Check SW5[1:4]= 0110 and SW5[6]=0, then power on. diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c new file mode 100644 index 0000000000..48c4b308be --- /dev/null +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -0,0 +1,148 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <mmc.h> +#include <netdev.h> +#include <pci.h> +#include <asm/fsl_ifc.h> +#include <asm/fsl_pci.h> + +#include "cpld.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("Board: %sPCIe, ", cpu->name); + printf("CPLD Ver: 0x%02x\n", in_8(&cpld_data->cpldver)); + + return 0; +} + +int board_early_init_f(void) +{ + struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR; + + /* Clock configuration to access CPLD using IFC(GPCM) */ + setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned long flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_64M, 1); + + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif /* ifdef CONFIG_PCI */ + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[2]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + /* Register 1G MDIO bus */ + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + + return pci_eth_init(bis); +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void fdt_del_sec(void *blob, int offset) +{ + int nodeoff = 0; + + while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0", + CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET + + offset * 0x20000)) >= 0) { + fdt_del_node(blob, nodeoff); + offset++; + } +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + struct cpu_type *cpu; + + cpu = gd->arch.cpu; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + +#if defined(CONFIG_PCI) + FT_FSL_PCI_SETUP; +#endif + + fdt_fixup_memory(blob, (u64)base, (u64)size); + if (cpu->soc_ver == SVR_C291) + fdt_del_sec(blob, 1); + else if (cpu->soc_ver == SVR_C292) + fdt_del_sec(blob, 2); +} +#endif diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c new file mode 100644 index 0000000000..5cbccff633 --- /dev/null +++ b/board/freescale/c29xpcie/cpld.c @@ -0,0 +1,131 @@ +/** + * Copyright 2013 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * Po Liu <Po.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the + * CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" +/** + * Set the boot bank to the alternate bank + */ +void cpld_set_altbank(u8 banksel) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + u8 reg11; + + reg11 = in_8(&cpld_data->flhcsr); + + switch (banksel) { + case 1: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK1); + break; + case 2: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK2); + break; + case 3: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK3); + break; + case 4: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK4); + break; + default: + printf("Invalid value! [1-4]\n"); + return; + } + + udelay(100); + do_reset(NULL, 0, 0, NULL); +} + +/** + * Set the boot bank to the default bank + */ +void cpld_set_defbank(void) +{ + cpld_set_altbank(4); +} + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("chipid1 = 0x%02x\n", in_8(&cpld_data->chipid1)); + printf("chipid2 = 0x%02x\n", in_8(&cpld_data->chipid2)); + printf("hwver = 0x%02x\n", in_8(&cpld_data->hwver)); + printf("cpldver = 0x%02x\n", in_8(&cpld_data->cpldver)); + printf("rstcon = 0x%02x\n", in_8(&cpld_data->rstcon)); + printf("flhcsr = 0x%02x\n", in_8(&cpld_data->flhcsr)); + printf("wdcsr = 0x%02x\n", in_8(&cpld_data->wdcsr)); + printf("wdkick = 0x%02x\n", in_8(&cpld_data->wdkick)); + printf("fancsr = 0x%02x\n", in_8(&cpld_data->fancsr)); + printf("ledcsr = 0x%02x\n", in_8(&cpld_data->ledcsr)); + printf("misc = 0x%02x\n", in_8(&cpld_data->misccsr)); + printf("bootor = 0x%02x\n", in_8(&cpld_data->bootor)); + printf("bootcfg1 = 0x%02x\n", in_8(&cpld_data->bootcfg1)); + printf("bootcfg2 = 0x%02x\n", in_8(&cpld_data->bootcfg2)); + printf("bootcfg3 = 0x%02x\n", in_8(&cpld_data->bootcfg3)); + printf("bootcfg4 = 0x%02x\n", in_8(&cpld_data->bootcfg4)); + putc('\n'); +} +#endif + +int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + unsigned char value; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (!strcmp(argv[2], "altbank") && argv[3]) { + value = (u8)simple_strtoul(argv[3], NULL, 16); + cpld_set_altbank(value); + } else if (!argv[2]) + cpld_set_defbank(); + else + cmd_usage(cmdtp); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, + "Reset the board using the CPLD sequencer", + "reset - hard reset to default bank 4\n" + "cpld_cmd reset altbank [bank]- reset to alternate bank\n" + " - [bank] bank value select 1-4\n" + " - bank 1 on the flash 0x0000000~0x0ffffff\n" + " - bank 2 on the flash 0x1000000~0x1ffffff\n" + " - bank 3 on the flash 0x2000000~0x2ffffff\n" + " - bank 4 on the flash 0x3000000~0x3ffffff\n" +#ifdef DEBUG + "cpld_cmd dump - display the CPLD registers\n" +#endif + ); diff --git a/board/freescale/c29xpcie/cpld.h b/board/freescale/c29xpcie/cpld.h new file mode 100644 index 0000000000..20862a3c03 --- /dev/null +++ b/board/freescale/c29xpcie/cpld.h @@ -0,0 +1,40 @@ +/** + * Copyright 2013 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.Hu@freescale.com> + * Po Liu <Po.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the ngPIXIS, a board-specific FPGA used on + * some Freescale reference boards. + */ + +/* + * CPLD register set. Feel free to add board-specific #ifdefs where necessary. + */ +struct cpld_data { + u8 chipid1; /* 0x0 - CPLD Chip ID1 Register */ + u8 chipid2; /* 0x1 - CPLD Chip ID2 Register */ + u8 hwver; /* 0x2 - Hardware Version Register */ + u8 cpldver; /* 0x3 - Software Version Register */ + u8 res[12]; + u8 rstcon; /* 0x10 - Reset control register */ + u8 flhcsr; /* 0x11 - Flash control and status Register */ + u8 wdcsr; /* 0x12 - Watchdog control and status Register */ + u8 wdkick; /* 0x13 - Watchdog kick Register */ + u8 fancsr; /* 0x14 - Fan control and status Register */ + u8 ledcsr; /* 0x15 - LED control and status Register */ + u8 misccsr; /* 0x16 - Misc control and status Register */ + u8 bootor; /* 0x17 - Boot configure override Register */ + u8 bootcfg1; /* 0x18 - Boot configure 1 Register */ + u8 bootcfg2; /* 0x19 - Boot configure 2 Register */ + u8 bootcfg3; /* 0x1a - Boot configure 3 Register */ + u8 bootcfg4; /* 0x1b - Boot configure 4 Register */ +}; + +#define CPLD_BANKSEL_EN 0x02 +#define CPLD_BANKSEL_MASK 0x3f +#define CPLD_SELECT_BANK1 0xc0 +#define CPLD_SELECT_BANK2 0x80 +#define CPLD_SELECT_BANK3 0x40 +#define CPLD_SELECT_BANK4 0x00 diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c new file mode 100644 index 0000000000..b017cfd961 --- /dev/null +++ b/board/freescale/c29xpcie/ddr.c @@ -0,0 +1,86 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +/* + * Micron MT41J128M16HA-15E + * */ +dimm_params_t ddr_raw_timing = { + .n_ranks = 1, + .rank_density = 536870912u, + .capacity = 536870912u, + .primary_sdram_width = 32, + .ec_sdram_width = 8, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 14, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 2, + .burst_lengths_bitmask = 0x0c, + + .tCKmin_X_ps = 1650, + .caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */ + .tAA_ps = 14050, + .tWR_ps = 15000, + .tRCD_ps = 13500, + .tRRD_ps = 75000, + .tRP_ps = 13500, + .tRAS_ps = 40000, + .tRC_ps = 49500, + .tRFC_ps = 160000, + .tWTR_ps = 75000, + .tRTP_ps = 75000, + .refresh_rate_ps = 7800000, + .tFAW_ps = 30000, +}; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "Fixed DDR on board"; + + if ((controller_number == 0) && (dimm_number == 0)) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + int i; + popts->clk_adjust = 2; + popts->cpo_override = 0x1f; + popts->write_data_delay = 4; + popts->half_strength_driver_enable = 1; + popts->bstopre = 0x3cf; + popts->quad_rank_present = 1; + popts->rtt_override = 1; + popts->rtt_override_value = 1; + popts->dynamic_power = 1; + /* Write leveling override */ + popts->wrlvl_en = 1; + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + popts->wrlvl_start = 0x4; + popts->trwt_override = 1; + popts->trwt = 0; + + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; + popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; + } +} diff --git a/board/freescale/c29xpcie/law.c b/board/freescale/c29xpcie/law.c new file mode 100644 index 0000000000..cd8fc2105d --- /dev/null +++ b/board/freescale/c29xpcie/law.c @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_16K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, LAW_SIZE_512K, + LAW_TRGT_IF_PLATFORM_SRAM), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c new file mode 100644 index 0000000000..ddd1ef80b2 --- /dev/null +++ b/board/freescale/c29xpcie/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 1, BOOKE_PAGESZ_64M, 1), + +#ifdef CONFIG_PCI + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256K, 1), +#endif + + SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_4K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_16K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE, + CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE + 0x40000, + CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_256K, 1), + +#ifdef CONFIG_SYS_RAMBOOT + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, + CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_256M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index d451f6ff01..f9550c48ce 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -45,15 +45,14 @@ COBJS-$(CONFIG_MPC8555CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o -ifndef CONFIG_SPL_BUILD COBJS-$(CONFIG_P1022DS) += ics307_clk.o -endif COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o COBJS-$(CONFIG_P5040DS) += ics307_clk.o COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o +COBJS-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.c b/board/freescale/common/idt8t49n222a_serdes_clk.c new file mode 100644 index 0000000000..d347162277 --- /dev/null +++ b/board/freescale/common/idt8t49n222a_serdes_clk.c @@ -0,0 +1,207 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Shaveta Leekha <shaveta@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "idt8t49n222a_serdes_clk.h" + +#define DEVICE_ID_REG 0x00 + +static int check_pll_status(u8 idt_addr) +{ + u8 val = 0; + int ret; + + ret = i2c_read(idt_addr, 0x17, 1, &val, 1); + if (ret < 0) { + printf("IDT:0x%x could not read status register from device.\n", + idt_addr); + return ret; + } + + if (val & 0x04) { + debug("idt8t49n222a PLL is LOCKED: %x\n", val); + } else { + printf("idt8t49n222a PLL is not LOCKED: %x\n", val); + return -1; + } + + return 0; +} + +int set_serdes_refclk(u8 idt_addr, u8 serdes_num, + enum serdes_refclk refclk1, + enum serdes_refclk refclk2, u8 feedback) +{ + u8 dev_id = 0; + int i, ret; + + debug("IDT:Configuring idt8t49n222a device at I2C address: 0x%2x\n", + idt_addr); + + ret = i2c_read(idt_addr, DEVICE_ID_REG, 1, &dev_id, 1); + if (ret < 0) { + debug("IDT:0x%x could not read DEV_ID from device.\n", + idt_addr); + return ret; + } + + if ((dev_id != 0x00) && (dev_id != 0x24) && (dev_id != 0x2a)) { + debug("IDT: device at address 0x%x is not idt8t49n222a.\n", + idt_addr); + } + + if (serdes_num != 1 && serdes_num != 2) { + debug("serdes_num should be 1 for SerDes1 and" + " 2 for SerDes2.\n"); + return -1; + } + + if ((refclk1 == SERDES_REFCLK_122_88 && refclk2 != SERDES_REFCLK_122_88) + || (refclk1 != SERDES_REFCLK_122_88 + && refclk2 == SERDES_REFCLK_122_88)) { + debug("Only one refclk at 122.88MHz is not supported." + " Please set both refclk1 & refclk2 to 122.88MHz" + " or both not to 122.88MHz.\n"); + return -1; + } + + if (refclk1 != SERDES_REFCLK_100 && refclk1 != SERDES_REFCLK_122_88 + && refclk1 != SERDES_REFCLK_125 + && refclk1 != SERDES_REFCLK_156_25) { + debug("refclk1 should be 100MHZ, 122.88MHz, 125MHz" + " or 156.25MHz.\n"); + return -1; + } + + if (refclk2 != SERDES_REFCLK_100 && refclk2 != SERDES_REFCLK_122_88 + && refclk2 != SERDES_REFCLK_125 + && refclk2 != SERDES_REFCLK_156_25) { + debug("refclk2 should be 100MHZ, 122.88MHz, 125MHz" + " or 156.25MHz.\n"); + return -1; + } + + if (feedback != 0 && feedback != 1) { + debug("valid values for feedback are 0(default) or 1.\n"); + return -1; + } + + /* Configuring IDT for output refclks as + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + */ + if (refclk1 == SERDES_REFCLK_122_88 && + refclk2 == SERDES_REFCLK_122_88) { + printf("Setting refclk1:122.88 and refclk2:122.88\n"); + for (i = 0; i < NUM_IDT_REGS; i++) + i2c_reg_write(idt_addr, idt_conf_122_88[i][0], + idt_conf_122_88[i][1]); + + if (feedback) { + for (i = 0; i < NUM_IDT_REGS_FEEDBACK; i++) + i2c_reg_write(idt_addr, + idt_conf_122_88_feedback[i][0], + idt_conf_122_88_feedback[i][1]); + } + } + + if (refclk1 != SERDES_REFCLK_122_88 && + refclk2 != SERDES_REFCLK_122_88) { + for (i = 0; i < NUM_IDT_REGS; i++) + i2c_reg_write(idt_addr, idt_conf_not_122_88[i][0], + idt_conf_not_122_88[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 100MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_100 && refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:100 and refclk2:125\n"); + i2c_reg_write(idt_addr, 0x11, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:125 and refclk2:125\n"); + i2c_reg_write(idt_addr, 0x10, 0x10); + i2c_reg_write(idt_addr, 0x11, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 100MHz + */ + if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_100) { + printf("Setting refclk1:125 and refclk2:100\n"); + i2c_reg_write(idt_addr, 0x10, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:156.25 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25[i][0], + idt_conf_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 100MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_100 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:100 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_100_156_25[i][0], + idt_conf_100_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_125 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:125 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_125_156_25[i][0], + idt_conf_125_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 100MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_100) { + printf("Setting refclk1:156.25 and refclk2:100\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25_100[i][0], + idt_conf_156_25_100[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:156.25 and refclk2:125\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25_125[i][0], + idt_conf_156_25_125[i][1]); + } + + /* waiting for maximum of 1 second if PLL doesn'r get locked + * initially. then check the status again. + */ + if (check_pll_status(idt_addr)) { + mdelay(1000); + if (check_pll_status(idt_addr)) + return -1; + } + + return 0; +} diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.h b/board/freescale/common/idt8t49n222a_serdes_clk.h new file mode 100644 index 0000000000..787bdd9ca4 --- /dev/null +++ b/board/freescale/common/idt8t49n222a_serdes_clk.h @@ -0,0 +1,107 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Shaveta Leekha <shaveta@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IDT8T49N222A_SERDES_CLK_H_ +#define __IDT8T49N222A_SERDES_CLK_H_ 1 + +#include <common.h> +#include <i2c.h> +#include "qixis.h" +#include "../b4860qds/b4860qds_qixis.h" +#include <errno.h> + +#define NUM_IDT_REGS 23 +#define NUM_IDT_REGS_FEEDBACK 12 +#define NUM_IDT_REGS_156_25 11 + +/* CLK */ +enum serdes_refclk { + SERDES_REFCLK_100, /* refclk 100Mhz */ + SERDES_REFCLK_122_88, /* refclk 122.88Mhz */ + SERDES_REFCLK_125, /* refclk 125Mhz */ + SERDES_REFCLK_156_25, /* refclk 156.25Mhz */ + SERDES_REFCLK_NONE = -1, +}; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + */ +static const u8 idt_conf_122_88[23][2] = { {0x00, 0x3C}, {0x01, 0x00}, + {0x02, 0x9F}, {0x03, 0x00}, {0x04, 0x0B}, {0x05, 0x00}, + {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, + {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, + {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x12}, {0x11, 0x12}, + {0x12, 0xB9}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, + {0x16, 0xA0} }; + + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 not equal to 122.88MHz Refclk2 not equal to 122.88MHz + */ +static const u8 idt_conf_not_122_88[23][2] = { {0x00, 0x00}, {0x01, 0x00}, + {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x0A}, {0x05, 0x00}, + {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, + {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, + {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x14}, {0x11, 0x14}, + {0x12, 0x35}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, + {0x16, 0xA0} }; + +/* Reconfiguration values for some of IDT registers for + * Output Refclks: + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + * and with feedback as 1 + */ +static const u8 idt_conf_122_88_feedback[12][2] = { {0x00, 0x50}, {0x02, 0xD7}, + {0x04, 0x89}, {0x06, 0xC3}, {0x08, 0xC0}, {0x0A, 0x07}, + {0x0C, 0x80}, {0x10, 0x10}, {0x11, 0x10}, {0x12, 0x1B}, + {0x14, 0x00}, {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 100MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_100_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x19}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 125MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_125_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x14}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 100MHz + */ +static const u8 idt_conf_156_25_100[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x19}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 125MHz + */ +static const u8 idt_conf_156_25_125[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x14}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +int set_serdes_refclk(u8 idt_addr, u8 serdes_num, + enum serdes_refclk refclk1, + enum serdes_refclk refclk2, u8 feedback); + +#endif /*__IDT8T49N222A_SERDES_CLK_H_ */ diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 40ce6b082d..a49e3006d9 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -107,6 +107,26 @@ const char *byte_to_binary_mask(u8 val, u8 mask, char *buf) return buf; } +#ifdef QIXIS_RST_FORCE_MEM +void board_assert_mem_reset(void) +{ + u8 rst; + + rst = QIXIS_READ(rst_frc[0]); + if (!(rst & QIXIS_RST_FORCE_MEM)) + QIXIS_WRITE(rst_frc[0], rst | QIXIS_RST_FORCE_MEM); +} + +void board_deassert_mem_reset(void) +{ + u8 rst; + + rst = QIXIS_READ(rst_frc[0]); + if (rst & QIXIS_RST_FORCE_MEM) + QIXIS_WRITE(rst_frc[0], rst & ~QIXIS_RST_FORCE_MEM); +} +#endif + void qixis_reset(void) { QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c index 8a3dc33b66..97a25e838e 100644 --- a/board/freescale/common/vsc3316_3308.c +++ b/board/freescale/common/vsc3316_3308.c @@ -31,7 +31,7 @@ int vsc_if_enable(unsigned int vsc_addr) return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1); } -int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], +int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2], unsigned int num_con) { unsigned int i; diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h index 4003fcdb23..2a49187779 100644 --- a/board/freescale/common/vsc3316_3308.h +++ b/board/freescale/common/vsc3316_3308.h @@ -12,7 +12,7 @@ #include <errno.h> int vsc_if_enable(unsigned int vsc_addr); -int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], +int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2], unsigned int num_con); int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], unsigned int num_con); diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index fffb0c817a..60e2100af3 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -27,8 +27,10 @@ int checkboard (void) { u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) || \ + defined(CONFIG_P5040DS) unsigned int i; +#endif static const char * const freq[] = {"100", "125", "156.25", "212.5" }; printf("Board: %sDS, ", cpu->name); @@ -47,19 +49,6 @@ int checkboard (void) else printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index da284cde95..517e87ff4c 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -56,14 +56,14 @@ phys_size_t fixed_sdram(void) ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); #if (CONFIG_NUM_DDR_CONTROLLERS == 2) memcpy(&ddr_cfg_regs, fixed_ddr_parm_1[i].ddr_settings, sizeof(ddr_cfg_regs)); ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1, 0); #endif /* diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 7a84cd295a..2fb4037428 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -68,7 +68,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 3d2dabd116..1e21a664c1 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -250,7 +250,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index d4e7abebd4..ee9269504c 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -248,7 +248,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index a45a5583c9..162636ef8c 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -273,7 +273,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index aa8badab48..681f052e41 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -139,7 +139,7 @@ phys_size_t fixed_sdram(void) } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index 73289f3656..d0e712eb30 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -26,7 +26,7 @@ void sdram_init(void) ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000; + ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000; /* mask off E bit */ u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR)); diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile index cfc05f7124..3bc4f4325f 100644 --- a/board/freescale/p1022ds/Makefile +++ b/board/freescale/p1022ds/Makefile @@ -21,6 +21,9 @@ ifdef MINIMAL COBJS-y += spl_minimal.o tlb.o law.o else +ifdef CONFIG_SPL_BUILD +COBJS-y += spl.o +endif COBJS-y += $(BOARD).o COBJS-y += ddr.o COBJS-y += law.o diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c new file mode 100644 index 0000000000..b9dbf81b3f --- /dev/null +++ b/board/freescale/p1022ds/spl.c @@ -0,0 +1,121 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> +#include "../common/ngpixis.h" +#include <fsl_esdhc.h> +#include <spi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const u32 sysclk_tbl[] = { + 66666000, 7499900, 83332500, 8999900, + 99999000, 11111000, 12499800, 13333200 +}; + +ulong get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + int px_spd; + u32 plat_ratio, sys_clk, bus_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + console_init_f(); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); + setbits_be32(&gur->pmuxcr, + in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); + +#ifdef CONFIG_SPL_SPI_BOOT + /* Enable the SPI */ + clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); +#endif + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + + /* initialize selected port with appropriate baud rate */ + px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); + sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + bus_clk = sys_clk * plat_ratio / 2; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); +#ifdef CONFIG_SPL_MMC_BOOT + puts("\nSD boot...\n"); +#elif defined(CONFIG_SPL_SPI_BOOT) + puts("\nSPI Flash boot...\n"); +#endif + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); +#ifndef CONFIG_SPL_NAND_BOOT + env_init(); +#endif +#ifdef CONFIG_SPL_MMC_BOOT + mmc_initialize(bd); +#endif + /* relocate environment function pointers etc. */ +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); + + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; +#else + env_relocate(); +#endif + + i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + gd->ram_size = initdram(0); +#ifdef CONFIG_SPL_NAND_BOOT + puts("Tertiary program loader running in sram..."); +#else + puts("Second program loader running in sram...\n"); +#endif + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_boot(); +#elif defined(CONFIG_SPL_SPI_BOOT) + spi_boot(); +#elif defined(CONFIG_SPL_NAND_BOOT) + nand_boot(); +#endif +} diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c index d150d95a2f..8b34396843 100644 --- a/board/freescale/p1022ds/spl_minimal.c +++ b/board/freescale/p1022ds/spl_minimal.c @@ -12,51 +12,6 @@ #include <asm/fsl_ddr_sdram.h> -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -void sdram_init(void) -{ - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; - - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); -#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 - __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds); - __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config); -#endif - __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2); - - __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2); - - __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl); - - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl); - - /* Set, but do not enable the memory */ - __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, - &ddr->sdram_cfg); - - in_be32(&ddr->sdram_cfg); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); - in_be32(&ddr->sdram_cfg); - - set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1); -} - const static u32 sysclk_tbl[] = { 66666000, 7499900, 83332500, 8999900, 99999000, 11111000, 12499800, 13333200 @@ -68,6 +23,10 @@ void board_init_f(ulong bootflag) u32 plat_ratio, sys_clk, bus_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); +#endif /* for FPGA */ set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); @@ -83,9 +42,6 @@ void board_init_f(ulong bootflag) puts("\nNAND boot... "); - /* Initialize the DDR3 */ - sdram_init(); - /* copy code to RAM and jump to it - this should not return */ /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. @@ -96,6 +52,7 @@ void board_init_f(ulong bootflag) void board_init_r(gd_t *gd, ulong dest_addr) { + puts("\nSecond program loader running in sram..."); nand_boot(); } diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c index 2eef6adbfa..e7ae2e25b2 100644 --- a/board/freescale/p1022ds/tlb.c +++ b/board/freescale/p1022ds/tlb.c @@ -71,25 +71,32 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_4K, 1), -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) /* **** - eSDHC/eSPI/NAND boot */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_1G, 1), + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_1G, 1), /* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_1G, 1), + CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_1G, 1), #endif #ifdef CONFIG_SYS_NAND_BASE /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_16K, 1), + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16K, 1), #endif +#ifdef CONFIG_SYS_INIT_L2_ADDR + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1) +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 0038077fcc..5bee22e638 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -220,7 +220,7 @@ phys_size_t fixed_sdram (void) ddr_cfg_regs.cs[0].bnds = 0x0000001F; } - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1); return ddr_size; diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README index 44377317dd..f4cc43fbfa 100644 --- a/board/freescale/p1_p2_rdb_pc/README +++ b/board/freescale/p1_p2_rdb_pc/README @@ -3,6 +3,7 @@ Overview P1_P2_RDB_PC represents a set of boards including P1020MSBG-PC P1020RDB-PC + P1020RDB-PD P1020UTM-PC P1021RDB-PC P1024RDB diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index 9355536b35..c0b72e035e 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -80,7 +80,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tFAW_ps = 30000, }; -#elif defined(CONFIG_P1020MBG) +#elif (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) /* Micron MT41J512M8_187E */ dimm_params_t ddr_raw_timing = { .n_ranks = 2, @@ -111,7 +111,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tFAW_ps = 37500, }; -#elif defined(CONFIG_P1020RDB) +#elif defined(CONFIG_P1020RDB_PC) /* * Samsung K4B2G0846C-HCF8 * The following timing are for "downshift" @@ -247,11 +247,11 @@ phys_size_t fixed_sdram(void) get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, sysinfo.freq_ddrbus)); ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index 93896dc719..d4561c7643 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -94,7 +94,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_1G, 1), -#ifdef CONFIG_P1020MBG +#if defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD) /* 2G DDR on P1020MBG, map the second 1G */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, diff --git a/board/freescale/p1_twr/Makefile b/board/freescale/p1_twr/Makefile new file mode 100644 index 0000000000..915b9bc895 --- /dev/null +++ b/board/freescale/p1_twr/Makefile @@ -0,0 +1,35 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c new file mode 100644 index 0000000000..67f69d79bd --- /dev/null +++ b/board/freescale/p1_twr/ddr.c @@ -0,0 +1,69 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/processor.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/io.h> +#include <asm/fsl_law.h> + +/* Fixed sdram init -- doesn't use serial presence detect. */ +phys_size_t fixed_sdram(void) +{ + sys_info_t sysinfo; + char buf[32]; + size_t ddr_size; + fsl_ddr_cfg_regs_t ddr_cfg_regs = { + .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, + .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, + .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, +#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 + .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, + .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, + .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2, +#endif + .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3, + .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0, + .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1, + .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2, + .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, + .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, + .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1, + .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2, + .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, + .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL, + .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT, + .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL, + .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, + .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, + .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, + .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, + .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, + .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, + .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, + .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, + .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 + }; + + get_sys_info(&sysinfo); + printf("Configuring DDR for %s MT/s data rate\n", + strmhz(buf, sysinfo.freq_ddrbus)); + + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); + + if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, + ddr_size, LAW_TRGT_IF_DDR_1) < 0) { + printf("ERROR setting Local Access Windows for DDR\n"); + return 0; + }; + + return ddr_size; +} diff --git a/board/freescale/p1_twr/law.c b/board/freescale/p1_twr/law.c new file mode 100644 index 0000000000..e79d8a4c13 --- /dev/null +++ b/board/freescale/p1_twr/law.c @@ -0,0 +1,16 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_SSD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC) +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c new file mode 100644 index 0000000000..ea8db6fc07 --- /dev/null +++ b/board/freescale/p1_twr/p1_twr.c @@ -0,0 +1,281 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <hwconfig.h> +#include <pci.h> +#include <i2c.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/io.h> +#include <asm/fsl_law.h> +#include <asm/fsl_lbc.h> +#include <asm/mp.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <ioports.h> +#include <asm/fsl_serdes.h> +#include <netdev.h> + +#define SYSCLK_64 64000000 +#define SYSCLK_66 66666666 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + par_io_t *par_io = (par_io_t *) &(gur->qe_par_io); + unsigned int cpdat_val = 0; + + /* Set-up up pin muxing based on board switch settings */ + cpdat_val = par_io[1].cpdat; + + /* Check switch setting for SYSCLK select (PB3) */ + if (cpdat_val & 0x10000000) + return SYSCLK_64; + else + return SYSCLK_66; + + return 0; +} + +#ifdef CONFIG_QE + +#define PCA_IOPORT_I2C_ADDR 0x23 +#define PCA_IOPORT_OUTPUT_CMD 0x2 +#define PCA_IOPORT_CFG_CMD 0x6 + +const qe_iop_conf_t qe_iop_conf_tab[] = { + +#ifdef CONFIG_TWR_P1025 + /* GPIO */ + {1, 0, 1, 0, 0}, + {1, 18, 1, 0, 0}, + + /* GPIO for switch options */ + {1, 2, 2, 0, 0}, /* PROFIBUS_MODE_SEL */ + {1, 3, 2, 0, 0}, /* SYS_CLK_SELECT */ + {1, 29, 2, 0, 0}, /* LOCALBUS_QE_MUXSEL */ + {1, 30, 2, 0, 0}, /* ETH_TDM_SEL */ + + /* QE_MUX_MDC */ + {1, 19, 1, 0, 1}, /* QE_MUX_MDC */ + + /* QE_MUX_MDIO */ + {1, 20, 3, 0, 1}, /* QE_MUX_MDIO */ + + /* UCC_1_MII */ + {0, 23, 2, 0, 2}, /* CLK12 */ + {0, 24, 2, 0, 1}, /* CLK9 */ + {0, 7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0 */ + {0, 9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1 */ + {0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2 */ + {0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ + {0, 6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0 */ + {0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1 */ + {0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ + {0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ + {0, 5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ + {0, 13, 1, 0, 2}, /* ENET1_TX_ER */ + {0, 4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B */ + {0, 8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B */ + {0, 17, 2, 0, 2}, /* ENET1_CRS */ + {0, 16, 2, 0, 2}, /* ENET1_COL */ + + /* UCC_5_RMII */ + {1, 11, 2, 0, 1}, /* CLK13 */ + {1, 7, 1, 0, 2}, /* ENET5_TXD0_SER5_TXD0 */ + {1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1 */ + {1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0 */ + {1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1 */ + {1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B */ + {1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B */ + {1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B */ + + /* TDMA - clock option is configured in OS based on board setting */ + {1, 23, 2, 0, 2}, /* TDMA_TXD */ + {1, 25, 2, 0, 2}, /* TDMA_RXD */ + {1, 26, 1, 0, 2}, /* TDMA_SYNC */ +#endif + + {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ +}; +#endif + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP)); + + /* SDHC_DAT[4:7] not exposed to pins (use as SPI) */ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); + + return 0; +} + +int checkboard(void) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u8 boot_status; + + printf("Board: %s\n", CONFIG_BOARDNAME); + + boot_status = ((gur->porbmsr) >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf; + puts("rom_loc: "); + if (boot_status == PORBMSR_ROMLOC_NOR) + puts("nor flash"); + else if (boot_status == PORBMSR_ROMLOC_SDHC) + puts("sd"); + else + puts("unknown"); + puts("\n"); + + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ + 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */ + return 0; +} + +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + ccsr_gur_t *gur __attribute__((unused)) = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (is_serdes_configured(SGMII_TSEC2)) { + printf("eTSEC2 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + +#if defined(CONFIG_UEC_ETH) + /* QE0 and QE3 need to be exposed for UCC1 + * and UCC5 Eth mode (in PMUXCR register). + * Currently QE/LBC muxed pins assumed to be + * LBC for U-Boot and PMUXCR updated by OS if required */ + + uec_standard_init(bis); +#endif + + return pci_eth_init(bis); +} + +#if defined(CONFIG_QE) +static void fdt_board_fixup_qe_pins(void *blob) +{ + int node; + + if (!hwconfig("qe")) { + /* For QE and eLBC pins multiplexing, + * When don't use QE function, remove + * qe node from dt blob. + */ + node = fdt_path_offset(blob, "/qe"); + if (node >= 0) + fdt_del_node(blob, node); + } else { + /* For TWR Peripheral Modules - TWR-SER2 + * board only can support Signal Port MII, + * so delete one UEC node when use MII port. + */ + if (hwconfig("mii")) + node = fdt_path_offset(blob, "/qe/ucc@2400"); + else + node = fdt_path_offset(blob, "/qe/ucc@2000"); + if (node >= 0) + fdt_del_node(blob, node); + } + + return; +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + FT_FSL_PCI_SETUP; + +#ifdef CONFIG_QE + do_fixup_by_compat(blob, "fsl,qe", "status", "okay", + sizeof("okay"), 0); +#endif +#if defined(CONFIG_TWR_P1025) + fdt_board_fixup_qe_pins(blob); +#endif + fdt_fixup_dr_usb(blob, bd); +} +#endif diff --git a/board/freescale/p1_twr/tlb.c b/board/freescale/p1_twr/tlb.c new file mode 100644 index 0000000000..308335c974 --- /dev/null +++ b/board/freescale/p1_twr/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + +#ifndef CONFIG_SPL_BUILD + /* W**G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_64M, 1), + + /* W**G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_SSD_BASE, CONFIG_SYS_SSD_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_1M, 1), + +#ifdef CONFIG_PCI + /* *I*G* - PCI memory 1.5G */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI I/O effective: 192K */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), +#endif + +#endif + +#ifdef CONFIG_SYS_RAMBOOT + /* *I*G - eSDHC boot */ + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_1G, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 08d10bc9c8..60694a6723 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -28,7 +28,6 @@ int checkboard(void) { u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; printf("Board: %sRDB, ", cpu->name); @@ -39,20 +38,6 @@ int checkboard(void) printf("vBank: %d\n", sw & 0x1); /* - * Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile index 85df066906..a2167b377b 100644 --- a/board/freescale/t4qds/Makefile +++ b/board/freescale/t4qds/Makefile @@ -8,7 +8,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS-y += $(BOARD).o +COBJS-$(CONFIG_T4240QDS) += t4240qds.o +COBJS-$(CONFIG_T4240EMU) += t4240emu.o COBJS-y += ddr.o COBJS-$(CONFIG_T4240QDS)+= eth.o COBJS-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 058d62511f..26ac2a54d2 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -13,81 +13,10 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include "ddr.h" DECLARE_GLOBAL_DATA_PTR; -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 rank_gb; - u32 clk_adjust; - u32 wrlvl_start; - u32 wrlvl_ctl_2; - u32 wrlvl_ctl_3; - u32 cpo; - u32 write_data_delay; - u32 force_2T; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {} -}; - -/* - * The three slots have slightly different timing. The center values are good - * for all slots. We use identical speed tables for them. In future use, if - * DIMMs require separated tables, make more entries as needed. - */ -static const struct board_specific_parameters *udimms[] = { - udimm0, -}; - -static const struct board_specific_parameters rdimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {} -}; - -/* - * The three slots have slightly different timing. See comments above. - */ -static const struct board_specific_parameters *rdimms[] = { - rdimm0, -}; - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h new file mode 100644 index 0000000000..d0a0951af9 --- /dev/null +++ b/board/freescale/t4qds/ddr.h @@ -0,0 +1,108 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +#ifdef CONFIG_T4240QDS +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {} +}; + +#else /* CONFIG_T4240EMU */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, + {2, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {} +}; +#endif /* CONFIG_T4240EMU */ + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index c771e17952..b5f488bcba 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -172,7 +172,10 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval) void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, enum fm_port port, int offset) { - if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + int interface = fm_info_get_enet_if(port); + + if (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_QSGMII) { switch (port) { case FM1_DTSEC1: if (qsgmiiphy_fix[port]) @@ -272,6 +275,7 @@ void fdt_fixup_board_enet(void *fdt) for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) { switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: switch (mdio_mux[i]) { case EMI1_SLOT1: fdt_status_okay_by_alias(fdt, "emi1_slot1"); @@ -393,7 +397,7 @@ static void initialize_qsgmiiphy_fix(void) int board_eth_init(bd_t *bis) { #if defined(CONFIG_FMAN_ENET) - int i, idx, lane, slot; + int i, idx, lane, slot, interface; struct memac_mdio_info dtsec_mdio_info; struct memac_mdio_info tgec_mdio_info; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -470,9 +474,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC9, - slot_qsgmii_phyaddr[1][3]); - fm_info_set_phy_address(FM1_DTSEC10, slot_qsgmii_phyaddr[1][2]); + fm_info_set_phy_address(FM1_DTSEC10, + slot_qsgmii_phyaddr[1][3]); } break; case 40: @@ -482,9 +486,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC10, - slot_qsgmii_phyaddr[1][3]); - fm_info_set_phy_address(FM1_DTSEC9, slot_qsgmii_phyaddr[1][2]); + fm_info_set_phy_address(FM1_DTSEC9, + slot_qsgmii_phyaddr[1][3]); } fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); @@ -498,15 +502,31 @@ int board_eth_init(bd_t *bis) for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { idx = i - FM1_DTSEC1; - switch (fm_info_get_enet_if(i)) { + interface = fm_info_get_enet_if(i); + switch (interface) { case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(FSL_SRDS_1, + case PHY_INTERFACE_MODE_QSGMII: + if (interface == PHY_INTERFACE_MODE_QSGMII) { + if (idx <= 3) + lane = serdes_get_first_lane(FSL_SRDS_1, + QSGMII_FM1_A); + else + lane = serdes_get_first_lane(FSL_SRDS_1, + QSGMII_FM1_B); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects QSGMII in slot %u\n", + idx + 1, slot); + } else { + lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot_fsm1[lane]; - debug("FM1@DTSEC%u expects SGMII in slot %u\n", - idx + 1, slot); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + } if (QIXIS_READ(present2) & (1 << (slot - 1))) fm_disable_port(i); switch (slot) { @@ -600,8 +620,8 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); - fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); - fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]); break; case 40: case 46: @@ -641,15 +661,31 @@ int board_eth_init(bd_t *bis) for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { idx = i - FM2_DTSEC1; - switch (fm_info_get_enet_if(i)) { + interface = fm_info_get_enet_if(i); + switch (interface) { case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(FSL_SRDS_2, + case PHY_INTERFACE_MODE_QSGMII: + if (interface == PHY_INTERFACE_MODE_QSGMII) { + if (idx <= 3) + lane = serdes_get_first_lane(FSL_SRDS_2, + QSGMII_FM2_A); + else + lane = serdes_get_first_lane(FSL_SRDS_2, + QSGMII_FM2_B); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects QSGMII in slot %u\n", + idx + 1, slot); + } else { + lane = serdes_get_first_lane(FSL_SRDS_2, SGMII_FM2_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot_fsm2[lane]; - debug("FM2@DTSEC%u expects SGMII in slot %u\n", - idx + 1, slot); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + } if (QIXIS_READ(present2) & (1 << (slot - 1))) fm_disable_port(i); switch (slot) { diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c index 63549df2aa..367783bfe4 100644 --- a/board/freescale/t4qds/law.c +++ b/board/freescale/t4qds/law.c @@ -19,7 +19,9 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_QMAN_MEM_PHYS SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif +#ifdef QIXIS_BASE_PHYS SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif #ifdef CONFIG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c new file mode 100644 index 0000000000..7a610367da --- /dev/null +++ b/board/freescale/t4qds/t4240emu.c @@ -0,0 +1,80 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + + printf("Board: %sEMU\n", cpu->name); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); +} diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4240qds.c index aa6a217f39..0c1a4fbd9f 100644 --- a/board/freescale/t4qds/t4qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -26,16 +26,16 @@ DECLARE_GLOBAL_DATA_PTR; -static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, +static int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, {8, 8}, {9, 9}, {14, 14}, {15, 15} }; -static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, +static int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, {10, 10}, {11, 11}, {12, 12}, {13, 13} }; -static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, +static int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, {10, 11}, {11, 10}, {12, 2}, {13, 3} }; -static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, +static int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, {8, 9}, {9, 8}, {14, 1}, {15, 0} }; int checkboard(void) @@ -43,12 +43,11 @@ int checkboard(void) char buf[64]; u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; printf("Board: %sQDS, ", cpu->name); printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", - QIXIS_READ(id), QIXIS_READ(arch)); + QIXIS_READ(id), QIXIS_READ(arch)); sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -63,24 +62,11 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); printf("FPGA: v%d (%s), build %d", - (int)QIXIS_READ(scver), qixis_read_tag(buf), - (int)qixis_read_minor()); + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could @@ -92,7 +78,7 @@ int checkboard(void) puts("SERDES Reference Clocks: "); sw = QIXIS_READ(brdcfg[2]); for (i = 0; i < MAX_SERDES; i++) { - static const char *freq[] = { + static const char * const freq[] = { "100", "125", "156.25", "161.1328125"}; unsigned int clock = (sw >> (6 - 2 * i)) & 3; @@ -367,25 +353,60 @@ int config_frontside_crossbar_vsc3316(void) srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - if (srds_prtcl_s1) { + switch (srds_prtcl_s1) { + case 38: + /* swap first lane and third lane on slot1 */ + vsc3316_fsm1_tx[0][1] = 14; + vsc3316_fsm1_tx[6][1] = 0; + vsc3316_fsm1_rx[1][1] = 2; + vsc3316_fsm1_rx[6][1] = 13; + case 40: + case 46: + case 48: + /* swap first lane and third lane on slot2 */ + vsc3316_fsm1_tx[2][1] = 8; + vsc3316_fsm1_tx[4][1] = 6; + vsc3316_fsm1_rx[2][1] = 10; + vsc3316_fsm1_rx[5][1] = 5; + default: ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8); if (ret) return ret; ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8); if (ret) return ret; + break; } srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; - if (srds_prtcl_s2) { + switch (srds_prtcl_s2) { + case 38: + /* swap first lane and third lane on slot3 */ + vsc3316_fsm2_tx[2][1] = 11; + vsc3316_fsm2_tx[5][1] = 4; + vsc3316_fsm2_rx[2][1] = 9; + vsc3316_fsm2_rx[4][1] = 7; + case 40: + case 46: + case 48: + case 50: + case 52: + case 54: + /* swap first lane and third lane on slot4 */ + vsc3316_fsm2_tx[6][1] = 3; + vsc3316_fsm2_tx[1][1] = 12; + vsc3316_fsm2_rx[0][1] = 1; + vsc3316_fsm2_rx[6][1] = 15; + default: ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8); if (ret) return ret; ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8); if (ret) return ret; + break; } return 0; @@ -430,7 +451,7 @@ int config_backside_crossbar_mux(void) break; default: printf("WARNING: unsupported for SerDes3 Protocol %d\n", - srds_prtcl_s3); + srds_prtcl_s3); return -1; } @@ -470,7 +491,7 @@ int config_backside_crossbar_mux(void) break; default: printf("WARNING: unsupported for SerDes4 Protocol %d\n", - srds_prtcl_s4); + srds_prtcl_s4); return -1; } @@ -495,8 +516,8 @@ int board_early_init_r(void) disable_tlb(flash_esel); set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); set_liodns(); #ifdef CONFIG_SYS_DPAA_QBMAN @@ -634,9 +655,8 @@ int misc_init_r(void) u32 pllcr0 = srds_regs->bank[i].pllcr0; u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; if (expected != actual[i]) { - printf("Warning: SERDES%u expects reference clock" - " %sMHz, but actual is %sMHz\n", i + 1, - serdes_clock_to_string(expected), + printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n", + i + 1, serdes_clock_to_string(expected), serdes_clock_to_string(actual[i])); } } @@ -795,42 +815,44 @@ void qixis_dump_switch(void) } sw[0] = dutcfg[0]; - sw[1] = (dutcfg[1] << 0x07) | \ - ((dutcfg[12] & 0xC0) >> 1) | \ - ((dutcfg[11] & 0xE0) >> 3) | \ - ((dutcfg[6] & 0x80) >> 6) | \ + sw[1] = (dutcfg[1] << 0x07) | + ((dutcfg[12] & 0xC0) >> 1) | + ((dutcfg[11] & 0xE0) >> 3) | + ((dutcfg[6] & 0x80) >> 6) | ((dutcfg[1] & 0x80) >> 7); - sw[2] = ((brdcfg[1] & 0x0f) << 4) | \ - ((brdcfg[1] & 0x30) >> 2) | \ - ((brdcfg[1] & 0x40) >> 5) | \ + sw[2] = ((brdcfg[1] & 0x0f) << 4) | + ((brdcfg[1] & 0x30) >> 2) | + ((brdcfg[1] & 0x40) >> 5) | ((brdcfg[1] & 0x80) >> 7); sw[3] = brdcfg[2]; - sw[4] = ((dutcfg[2] & 0x01) << 7) | \ - ((dutcfg[2] & 0x06) << 4) | \ - ((~QIXIS_READ(present)) & 0x10) | \ - ((brdcfg[3] & 0x80) >> 4) | \ - ((brdcfg[3] & 0x01) << 2) | \ - ((brdcfg[6] == 0x62) ? 3 : \ - ((brdcfg[6] == 0x5a) ? 2 : \ + sw[4] = ((dutcfg[2] & 0x01) << 7) | + ((dutcfg[2] & 0x06) << 4) | + ((~QIXIS_READ(present)) & 0x10) | + ((brdcfg[3] & 0x80) >> 4) | + ((brdcfg[3] & 0x01) << 2) | + ((brdcfg[6] == 0x62) ? 3 : + ((brdcfg[6] == 0x5a) ? 2 : ((brdcfg[6] == 0x5e) ? 1 : 0))); - sw[5] = ((brdcfg[0] & 0x0f) << 4) | \ - ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \ + sw[5] = ((brdcfg[0] & 0x0f) << 4) | + ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | ((brdcfg[0] & 0x40) >> 5); sw[6] = (brdcfg[11] & 0x20) | ((brdcfg[5] & 0x02) << 3); - sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \ + sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | ((brdcfg[5] & 0x10) << 2); - sw[8] = ((brdcfg[12] & 0x08) << 4) | \ + sw[8] = ((brdcfg[12] & 0x08) << 4) | ((brdcfg[12] & 0x03) << 5); puts("DIP switch (reverse-engineering)\n"); for (i = 0; i < 9; i++) { printf("SW%d = 0b%s (0x%02x)\n", - i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); + i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); } } -static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_vdd_adjust(cmd_tbl_t *cmdtp, + int flag, int argc, + char * const argv[]) { ulong override; diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c index b27356a5f7..b701e75209 100644 --- a/board/freescale/t4qds/tlb.c +++ b/board/freescale/t4qds/tlb.c @@ -120,9 +120,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif +#ifdef QIXIS_BASE_PHYS SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 17, BOOKE_PAGESZ_4K, 1), +#endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE /* * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index f0df2e39e6..426dc05c7d 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -18,6 +18,12 @@ #define REFLECTION_TESTPATTERN 0xdede #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) +#ifdef CONFIG_SYS_FPGA_NO_RFL_HI +#define REFLECTION_TESTREG reflection_low +#else +#define REFLECTION_TESTREG reflection_high +#endif + DECLARE_GLOBAL_DATA_PTR; int get_fpga_state(unsigned dev) @@ -90,23 +96,17 @@ int board_early_init_r(void) gd405ep_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - struct ihs_fpga *fpga = - (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); -#ifdef CONFIG_SYS_FPGA_NO_RFL_HI - u16 *reflection_target = &fpga->reflection_low; -#else - u16 *reflection_target = &fpga->reflection_high; -#endif /* * wait for fpga out of reset */ ctr = 0; while (1) { - out_le16(&fpga->reflection_low, - REFLECTION_TESTPATTERN); + u16 val; + + FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN); - if (in_le16(reflection_target) == - REFLECTION_TESTPATTERN_INV) + FPGA_GET_REG(k, REFLECTION_TESTREG, &val); + if (val == REFLECTION_TESTPATTERN_INV) break; udelay(100000); diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c index 48d878643b..35dfbbc577 100644 --- a/board/gdsys/405ep/dlvision-10g.c +++ b/board/gdsys/405ep/dlvision-10g.c @@ -55,6 +55,8 @@ enum { RAM_DDR2_64 = 2, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + int misc_init_r(void) { /* startup fans */ @@ -79,10 +81,9 @@ static unsigned int get_mc2_present(void) static void print_fpga_info(unsigned dev) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; unsigned unit_type; unsigned hardware_version; unsigned feature_rs232; @@ -96,6 +97,10 @@ static void print_fpga_info(unsigned dev) printf("FPGA%d: ", dev); + FPGA_GET_REG(dev, versions, &versions); + FPGA_GET_REG(dev, fpga_version, &fpga_version); + FPGA_GET_REG(dev, fpga_features, &fpga_features); + hardware_version = versions & 0x000f; if (fpga_state @@ -247,8 +252,9 @@ int checkboard(void) int last_stage_init(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); + u16 versions; + + FPGA_GET_REG(0, versions, &versions); print_fpga_info(0); if (get_mc2_present()) diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c index eee9ba0aaa..03d796cdb8 100644 --- a/board/gdsys/405ep/io.c +++ b/board/gdsys/405ep/io.c @@ -37,6 +37,8 @@ enum { HWVER_122 = 3, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + int misc_init_r(void) { /* startup fans */ @@ -101,15 +103,18 @@ int checkboard(void) static void print_fpga_info(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; unsigned unit_type; unsigned hardware_version; unsigned feature_channels; unsigned feature_expansion; + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + unit_type = (versions & 0xf000) >> 12; hardware_version = versions & 0x000f; feature_channels = fpga_features & 0x007f; @@ -163,7 +168,6 @@ static void print_fpga_info(void) */ int last_stage_init(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); unsigned int k; print_fpga_info(); @@ -175,7 +179,7 @@ int last_stage_init(void) configure_gbit_phy(k); /* take fpga serdes blocks out of reset */ - out_le16(&fpga->quad_serdes_reset, 0); + FPGA_SET_REG(0, quad_serdes_reset, 0); return 0; } diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index c728bc7b73..7a98e41d0a 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -7,6 +7,7 @@ #include <common.h> #include <command.h> +#include <errno.h> #include <asm/processor.h> #include <asm/io.h> #include <asm/ppc4xx-gpio.h> @@ -15,11 +16,22 @@ #include <gdsys_fpga.h> #include "../common/osd.h" +#include "../common/mclink.h" + +#include <i2c.h> +#include <pca953x.h> +#include <pca9698.h> + +#include <miiphy.h> + +DECLARE_GLOBAL_DATA_PTR; #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) +#define MAX_MUX_CHANNELS 2 + enum { UNITTYPE_MAIN_SERVER = 0, UNITTYPE_MAIN_USER = 1, @@ -31,11 +43,22 @@ enum { HWVER_100 = 0, HWVER_104 = 1, HWVER_110 = 2, + HWVER_120 = 3, + HWVER_200 = 4, + HWVER_210 = 5, + HWVER_220 = 6, + HWVER_230 = 7, +}; + +enum { + FPGA_HWVER_200 = 0, + FPGA_HWVER_210 = 1, }; enum { COMPRESSION_NONE = 0, - COMPRESSION_TYPE1_DELTA, + COMPRESSION_TYPE1_DELTA = 1, + COMPRESSION_TYPE1_TYPE2_DELTA = 3, }; enum { @@ -51,8 +74,75 @@ enum { enum { RAM_DDR2_32 = 0, + RAM_DDR3_32 = 1, }; +enum { + CARRIER_SPEED_1G = 0, + CARRIER_SPEED_2_5G = 1, +}; + +enum { + MCFPGA_DONE = 1 << 0, + MCFPGA_INIT_N = 1 << 1, + MCFPGA_PROGRAM_N = 1 << 2, + MCFPGA_UPDATE_ENABLE_N = 1 << 3, + MCFPGA_RESET_N = 1 << 4, +}; + +enum { + GPIO_MDC = 1 << 14, + GPIO_MDIO = 1 << 15, +}; + +unsigned int mclink_fpgacount; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + +static int setup_88e1518(const char *bus, unsigned char addr); + +int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) +{ + int res; + + switch (fpga) { + case 0: + out_le16(reg, data); + break; + default: + res = mclink_send(fpga - 1, regoff, data); + if (res < 0) { + printf("mclink_send reg %02lx data %04x returned %d\n", + regoff, data, res); + return res; + } + break; + } + + return 0; +} + +int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) +{ + int res; + + switch (fpga) { + case 0: + *data = in_le16(reg); + break; + default: + if (fpga > mclink_fpgacount) + return -EINVAL; + res = mclink_receive(fpga - 1, regoff, data); + if (res < 0) { + printf("mclink_receive reg %02lx returned %d\n", + regoff, res); + return res; + } + } + + return 0; +} + /* * Check Board Identity: */ @@ -74,12 +164,11 @@ int checkboard(void) return 0; } -static void print_fpga_info(void) +static void print_fpga_info(unsigned int fpga, bool rgmii2_present) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; unsigned unit_type; unsigned hardware_version; unsigned feature_compression; @@ -87,19 +176,29 @@ static void print_fpga_info(void) unsigned feature_audio; unsigned feature_sysclock; unsigned feature_ramconfig; + unsigned feature_carrier_speed; unsigned feature_carriers; unsigned feature_video_channels; + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + unit_type = (versions & 0xf000) >> 12; - hardware_version = versions & 0x000f; feature_compression = (fpga_features & 0xe000) >> 13; feature_osd = fpga_features & (1<<11); feature_audio = (fpga_features & 0x0600) >> 9; feature_sysclock = (fpga_features & 0x0180) >> 7; feature_ramconfig = (fpga_features & 0x0060) >> 5; + feature_carrier_speed = fpga_features & (1<<4); feature_carriers = (fpga_features & 0x000c) >> 2; feature_video_channels = fpga_features & 0x0003; + if (legacy) + printf("legacy "); + switch (unit_type) { case UNITTYPE_MAIN_USER: printf("Mainchannel"); @@ -114,27 +213,78 @@ static void print_fpga_info(void) break; } - switch (hardware_version) { - case HWVER_100: - printf(" HW-Ver 1.00\n"); - break; - - case HWVER_104: - printf(" HW-Ver 1.04\n"); - break; - - case HWVER_110: - printf(" HW-Ver 1.10\n"); - break; + if (unit_type == UNITTYPE_MAIN_USER) { + if (legacy) + hardware_version = + (in_le16((void *)LATCH2_BASE)>>8) & 0x0f; + else + hardware_version = + (!!pca9698_get_value(0x20, 24) << 0) + | (!!pca9698_get_value(0x20, 25) << 1) + | (!!pca9698_get_value(0x20, 26) << 2) + | (!!pca9698_get_value(0x20, 27) << 3); + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00,"); + break; + + case HWVER_104: + printf(" HW-Ver 1.04,"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10,"); + break; + + case HWVER_120: + printf(" HW-Ver 1.20-1.21,"); + break; + + case HWVER_200: + printf(" HW-Ver 2.00,"); + break; + + case HWVER_210: + printf(" HW-Ver 2.10,"); + break; + + case HWVER_220: + printf(" HW-Ver 2.20,"); + break; + + case HWVER_230: + printf(" HW-Ver 2.30,"); + break; + + default: + printf(" HW-Ver %d(not supported),", + hardware_version); + break; + } + if (rgmii2_present) + printf(" RGMII2,"); + } - default: - printf(" HW-Ver %d(not supported)\n", - hardware_version); - break; + if (unit_type == UNITTYPE_VIDEO_USER) { + hardware_version = versions & 0x000f; + switch (hardware_version) { + case FPGA_HWVER_200: + printf(" HW-Ver 2.00,"); + break; + + case FPGA_HWVER_210: + printf(" HW-Ver 2.10,"); + break; + + default: + printf(" HW-Ver %d(not supported),", + hardware_version); + break; + } } - printf(" FPGA V %d.%02d, features:", - fpga_version / 100, fpga_version % 100); + printf(" FPGA V %d.%02d\n features:", + fpga_version / 100, fpga_version % 100); switch (feature_compression) { @@ -146,6 +296,10 @@ static void print_fpga_info(void) printf(" type1-deltacompression"); break; + case COMPRESSION_TYPE1_TYPE2_DELTA: + printf(" type1-deltacompression, type2-inlinecompression"); + break; + default: printf(" compression %d(not supported)", feature_compression); break; @@ -192,53 +346,145 @@ static void print_fpga_info(void) printf(", RAM 32 bit DDR2"); break; + case RAM_DDR3_32: + printf(", RAM 32 bit DDR3"); + break; + default: printf(", RAM %d(not supported)", feature_ramconfig); break; } - printf(", %d carrier(s)", feature_carriers); + printf(", %d carrier(s) %s", feature_carriers, + feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s"); printf(", %d video channel(s)\n", feature_video_channels); } int last_stage_init(void) { - print_fpga_info(); + int slaves; + unsigned int k; + unsigned int mux_ch; + unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 }; + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + u16 fpga_features; + int feature_carrier_speed = fpga_features & (1<<4); + bool ch0_rgmii2_present = false; + + FPGA_GET_REG(0, fpga_features, &fpga_features); + + if (!legacy) + ch0_rgmii2_present = !pca9698_get_value(0x20, 30); + + print_fpga_info(0, ch0_rgmii2_present); + osd_probe(0); + + /* wait for FPGA done */ + for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) { + unsigned int ctr = 0; + + if (i2c_probe(mclink_controllers[k])) + continue; + + while (!(pca953x_get_val(mclink_controllers[k]) + & MCFPGA_DONE)) { + udelay(100000); + if (ctr++ > 5) { + printf("no done for mclink_controller %d\n", k); + break; + } + } + } + + if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) { + miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read, + bb_miiphy_write); + for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) { + if ((mux_ch == 1) && !ch0_rgmii2_present) + continue; + + setup_88e1518(bb_miiphy_buses[0].name, mux_ch); + } + } + + /* wait for slave-PLLs to be up and running */ + udelay(500000); + + mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; + slaves = mclink_probe(); + mclink_fpgacount = 0; + + if (slaves <= 0) + return 0; + + mclink_fpgacount = slaves; + + for (k = 1; k <= slaves; ++k) { + FPGA_GET_REG(k, fpga_features, &fpga_features); + feature_carrier_speed = fpga_features & (1<<4); + + print_fpga_info(k, false); + osd_probe(k); + if (feature_carrier_speed == CARRIER_SPEED_1G) { + miiphy_register(bb_miiphy_buses[k].name, + bb_miiphy_read, bb_miiphy_write); + setup_88e1518(bb_miiphy_buses[k].name, 0); + } + } - return osd_probe(0); + return 0; } /* * provide access to fpga gpios (for I2C bitbang) + * (these may look all too simple but make iocon.h much more readable) */ -void fpga_gpio_set(int pin) +void fpga_gpio_set(unsigned int bus, int pin) { - out_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x18), pin); + FPGA_SET_REG(bus, gpio.set, pin); } -void fpga_gpio_clear(int pin) +void fpga_gpio_clear(unsigned int bus, int pin) { - out_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x16), pin); + FPGA_SET_REG(bus, gpio.clear, pin); } -int fpga_gpio_get(int pin) +int fpga_gpio_get(unsigned int bus, int pin) { - return in_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x14)) & pin; + u16 val; + + FPGA_GET_REG(bus, gpio.read, &val); + + return val & pin; } void gd405ep_init(void) { + unsigned int k; + + if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */ + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) + gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM; + } else { + pca9698_direction_output(0x20, 4, 1); + } } void gd405ep_set_fpga_reset(unsigned state) { - if (state) { - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + if (legacy) { + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } } else { - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + pca9698_set_value(0x20, 4, state ? 0 : 1); } } @@ -253,5 +499,333 @@ void gd405ep_setup_hw(void) int gd405ep_get_fpga_done(unsigned fpga) { - return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga); + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + if (legacy) + return in_le16((void *)LATCH2_BASE) + & CONFIG_SYS_FPGA_DONE(fpga); + else + return pca9698_get_value(0x20, 20); +} + +/* + * FPGA MII bitbang implementation + */ + +struct fpga_mii { + unsigned fpga; + int mdio; +} fpga_mii[] = { + { 0, 1}, + { 1, 1}, + { 2, 1}, + { 3, 1}, +}; + +static int mii_dummy_init(struct bb_miiphy_bus *bus) +{ + return 0; +} + +static int mii_mdio_active(struct bb_miiphy_bus *bus) +{ + struct fpga_mii *fpga_mii = bus->priv; + + if (fpga_mii->mdio) + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); + else + FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); + + return 0; +} + +static int mii_mdio_tristate(struct bb_miiphy_bus *bus) +{ + struct fpga_mii *fpga_mii = bus->priv; + + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); + + return 0; +} + +static int mii_set_mdio(struct bb_miiphy_bus *bus, int v) +{ + struct fpga_mii *fpga_mii = bus->priv; + + if (v) + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); + else + FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); + + fpga_mii->mdio = v; + + return 0; +} + +static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v) +{ + u16 gpio; + struct fpga_mii *fpga_mii = bus->priv; + + FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio); + + *v = ((gpio & GPIO_MDIO) != 0); + + return 0; +} + +static int mii_set_mdc(struct bb_miiphy_bus *bus, int v) +{ + struct fpga_mii *fpga_mii = bus->priv; + + if (v) + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC); + else + FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC); + + return 0; +} + +static int mii_delay(struct bb_miiphy_bus *bus) +{ + udelay(1); + + return 0; +} + +struct bb_miiphy_bus bb_miiphy_buses[] = { + { + .name = "board0", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[0], + }, + { + .name = "board1", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[1], + }, + { + .name = "board2", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[2], + }, + { + .name = "board3", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[3], + }, +}; + +int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / + sizeof(bb_miiphy_buses[0]); + +enum { + MIICMD_SET, + MIICMD_MODIFY, + MIICMD_VERIFY_VALUE, + MIICMD_WAIT_FOR_VALUE, +}; + +struct mii_setupcmd { + u8 token; + u8 reg; + u16 data; + u16 mask; + u32 timeout; +}; + +/* + * verify we are talking to a 88e1518 + */ +struct mii_setupcmd verify_88e1518[] = { + { MIICMD_SET, 22, 0x0000 }, + { MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff }, + { MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 }, +}; + +/* + * workaround for erratum mentioned in 88E1518 release notes + */ +struct mii_setupcmd fixup_88e1518[] = { + { MIICMD_SET, 22, 0x00ff }, + { MIICMD_SET, 17, 0x214b }, + { MIICMD_SET, 16, 0x2144 }, + { MIICMD_SET, 17, 0x0c28 }, + { MIICMD_SET, 16, 0x2146 }, + { MIICMD_SET, 17, 0xb233 }, + { MIICMD_SET, 16, 0x214d }, + { MIICMD_SET, 17, 0xcc0c }, + { MIICMD_SET, 16, 0x2159 }, + { MIICMD_SET, 22, 0x00fb }, + { MIICMD_SET, 7, 0xc00d }, + { MIICMD_SET, 22, 0x0000 }, +}; + +/* + * default initialization: + * - set RGMII receive timing to "receive clock transition when data stable" + * - set RGMII transmit timing to "transmit clock internally delayed" + * - set RGMII output impedance target to 78,8 Ohm + * - run output impedance calibration + * - set autonegotiation advertise to 1000FD only + */ +struct mii_setupcmd default_88e1518[] = { + { MIICMD_SET, 22, 0x0002 }, + { MIICMD_MODIFY, 21, 0x0030, 0x0030 }, + { MIICMD_MODIFY, 25, 0x0000, 0x0003 }, + { MIICMD_MODIFY, 24, 0x8000, 0x8000 }, + { MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 }, + { MIICMD_SET, 22, 0x0000 }, + { MIICMD_MODIFY, 4, 0x0000, 0x01e0 }, + { MIICMD_MODIFY, 9, 0x0200, 0x0300 }, +}; + +/* + * turn off CLK125 for PHY daughterboard + */ +struct mii_setupcmd ch1fix_88e1518[] = { + { MIICMD_SET, 22, 0x0002 }, + { MIICMD_MODIFY, 16, 0x0006, 0x0006 }, + { MIICMD_SET, 22, 0x0000 }, +}; + +/* + * perform copper software reset + */ +struct mii_setupcmd swreset_88e1518[] = { + { MIICMD_SET, 22, 0x0000 }, + { MIICMD_MODIFY, 0, 0x8000, 0x8000 }, + { MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 }, +}; + +static int process_setupcmd(const char *bus, unsigned char addr, + struct mii_setupcmd *setupcmd) +{ + int res; + u8 reg = setupcmd->reg; + u16 data = setupcmd->data; + u16 mask = setupcmd->mask; + u32 timeout = setupcmd->timeout; + u16 orig_data; + unsigned long start; + + debug("mii %s:%u reg %2u ", bus, addr, reg); + + switch (setupcmd->token) { + case MIICMD_MODIFY: + res = miiphy_read(bus, addr, reg, &orig_data); + if (res) + break; + debug("is %04x. (value %04x mask %04x) ", orig_data, data, + mask); + data = (orig_data & ~mask) | (data & mask); + case MIICMD_SET: + debug("=> %04x\n", data); + res = miiphy_write(bus, addr, reg, data); + break; + case MIICMD_VERIFY_VALUE: + res = miiphy_read(bus, addr, reg, &orig_data); + if (res) + break; + if ((orig_data & mask) != (data & mask)) + res = -1; + debug("(value %04x mask %04x) == %04x? %s\n", data, mask, + orig_data, res ? "FAIL" : "PASS"); + break; + case MIICMD_WAIT_FOR_VALUE: + res = -1; + start = get_timer(0); + while ((res != 0) && (get_timer(start) < timeout)) { + res = miiphy_read(bus, addr, reg, &orig_data); + if (res) + continue; + if ((orig_data & mask) != (data & mask)) + res = -1; + } + debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data, + mask, orig_data, res ? "FAIL" : "PASS", + get_timer(start)); + break; + default: + res = -1; + break; + } + + return res; +} + +static int process_setup(const char *bus, unsigned char addr, + struct mii_setupcmd *setupcmd, unsigned int count) +{ + int res = 0; + unsigned int k; + + for (k = 0; k < count; ++k) { + res = process_setupcmd(bus, addr, &setupcmd[k]); + if (res) { + printf("mii cmd %u on bus %s addr %u failed, aborting setup", + setupcmd[k].token, bus, addr); + break; + } + } + + return res; +} + +static int setup_88e1518(const char *bus, unsigned char addr) +{ + int res; + + res = process_setup(bus, addr, + verify_88e1518, ARRAY_SIZE(verify_88e1518)); + if (res) + return res; + + res = process_setup(bus, addr, + fixup_88e1518, ARRAY_SIZE(fixup_88e1518)); + if (res) + return res; + + res = process_setup(bus, addr, + default_88e1518, ARRAY_SIZE(default_88e1518)); + if (res) + return res; + + if (addr) { + res = process_setup(bus, addr, + ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518)); + if (res) + return res; + } + + res = process_setup(bus, addr, + swreset_88e1518, ARRAY_SIZE(swreset_88e1518)); + if (res) + return res; + + return 0; } diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c index bca78032f8..ff0edb2547 100644 --- a/board/gdsys/405ep/neo.c +++ b/board/gdsys/405ep/neo.c @@ -28,6 +28,8 @@ enum { HWVER_300 = 3, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + int misc_init_r(void) { /* startup fans */ @@ -54,10 +56,9 @@ int checkboard(void) static void print_fpga_info(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; int fpga_state = get_fpga_state(0); unsigned unit_type; unsigned hardware_version; @@ -74,6 +75,10 @@ static void print_fpga_info(void) return; } + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + unit_type = (versions & 0xf000) >> 12; hardware_version = versions & 0x000f; feature_channels = fpga_features & 0x007f; diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c index 32e24c08cb..c1a583ffbe 100644 --- a/board/gdsys/405ex/405ex.c +++ b/board/gdsys/405ex/405ex.c @@ -11,6 +11,12 @@ #define REFLECTION_TESTPATTERN 0xdede #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) +#ifdef CONFIG_SYS_FPGA_NO_RFL_HI +#define REFLECTION_TESTREG reflection_low +#else +#define REFLECTION_TESTREG reflection_high +#endif + DECLARE_GLOBAL_DATA_PTR; int get_fpga_state(unsigned dev) @@ -220,23 +226,17 @@ int board_early_init_r(void) gd405ex_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - struct ihs_fpga *fpga = - (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); -#ifdef CONFIG_SYS_FPGA_NO_RFL_HI - u16 *reflection_target = &fpga->reflection_low; -#else - u16 *reflection_target = &fpga->reflection_high; -#endif /* * wait for fpga out of reset */ ctr = 0; while (1) { - out_le16(&fpga->reflection_low, - REFLECTION_TESTPATTERN); + u16 val; + + FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN); - if (in_le16(reflection_target) == - REFLECTION_TESTPATTERN_INV) + FPGA_GET_REG(k, REFLECTION_TESTREG, &val); + if (val == REFLECTION_TESTPATTERN_INV) break; udelay(100000); diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c index fa8961a351..2f8e306261 100644 --- a/board/gdsys/405ex/io64.c +++ b/board/gdsys/405ex/io64.c @@ -51,6 +51,8 @@ enum { HWVER_110 = 1, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + static inline void blank_string(int size) { int i; @@ -84,10 +86,9 @@ int misc_init_r(void) static void print_fpga_info(unsigned dev) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; int fpga_state = get_fpga_state(dev); unsigned unit_type; @@ -95,6 +96,10 @@ static void print_fpga_info(unsigned dev) unsigned feature_channels; unsigned feature_expansion; + FPGA_GET_REG(dev, versions, &versions); + FPGA_GET_REG(dev, fpga_version, &fpga_version); + FPGA_GET_REG(dev, fpga_features, &fpga_features); + printf("FPGA%d: ", dev); if (fpga_state & FPGA_STATE_PLATFORM) printf("(legacy) "); @@ -226,8 +231,6 @@ int last_stage_init(void) { unsigned int k; unsigned int fpga; - struct ihs_fpga *fpga0 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - struct ihs_fpga *fpga1 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(1); int failed = 0; char str_phys[] = "Setup PHYs -"; char str_serdes[] = "Start SERDES blocks"; @@ -265,17 +268,16 @@ int last_stage_init(void) /* take fpga serdes blocks out of reset */ puts(str_serdes); udelay(500000); - out_le16(&fpga0->quad_serdes_reset, 0); - out_le16(&fpga1->quad_serdes_reset, 0); + FPGA_SET_REG(0, quad_serdes_reset, 0); + FPGA_SET_REG(1, quad_serdes_reset, 0); blank_string(strlen(str_serdes)); /* take channels out of reset */ puts(str_channels); udelay(500000); for (fpga = 0; fpga < 2; ++fpga) { - u16 *ch0_config_int = &(fpga ? fpga1 : fpga0)->ch0_config_int; for (k = 0; k < 32; ++k) - out_le16(ch0_config_int + 4 * k, 0); + FPGA_SET_REG(fpga, ch[k].config_int, 0); } blank_string(strlen(str_channels)); @@ -283,16 +285,16 @@ int last_stage_init(void) puts(str_locks); udelay(500000); for (fpga = 0; fpga < 2; ++fpga) { - u16 *ch0_status_int = &(fpga ? fpga1 : fpga0)->ch0_status_int; for (k = 0; k < 32; ++k) { - u16 status = in_le16(ch0_status_int + 4*k); + u16 status; + FPGA_GET_REG(k, ch[k].status_int, &status); if (!(status & (1 << 4))) { failed = 1; printf("fpga %d channel %d: no serdes lock\n", fpga, k); } /* reset events */ - out_le16(ch0_status_int + 4*k, status); + FPGA_SET_REG(fpga, ch[k].status_int, 0); } } blank_string(strlen(str_locks)); @@ -300,14 +302,14 @@ int last_stage_init(void) /* verify hicb_status */ puts(str_hicb); for (fpga = 0; fpga < 2; ++fpga) { - u16 *ch0_hicb_status_int = &(fpga ? fpga1 : fpga0)->ch0_hicb_status_int; for (k = 0; k < 32; ++k) { - u16 status = in_le16(ch0_hicb_status_int + 4*k); + u16 status; + FPGA_GET_REG(k, hicb_ch[k].status_int, &status); if (status) printf("fpga %d hicb %d: hicb status %04x\n", fpga, k, status); /* reset events */ - out_le16(ch0_hicb_status_int + 4*k, status); + FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0); } } blank_string(strlen(str_hicb)); diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 43e6a4cdef..216ad964af 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -13,9 +13,11 @@ endif LIB = $(obj)lib$(VENDOR).o +COBJS-$(CONFIG_SYS_FPGA_COMMON) += fpga.o + COBJS-$(CONFIG_IO) += miiphybb.o COBJS-$(CONFIG_IO64) += miiphybb.o -COBJS-$(CONFIG_IOCON) += osd.o +COBJS-$(CONFIG_IOCON) += osd.o mclink.o COBJS-$(CONFIG_DLVISION_10G) += osd.o COBJS-$(CONFIG_CONTROLCENTERD) += dp501.o diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c index 9aa4e3f4bd..52f3ea167f 100644 --- a/board/gdsys/common/dp501.c +++ b/board/gdsys/common/dp501.c @@ -2,23 +2,7 @@ * (C) Copyright 2012 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */ diff --git a/board/gdsys/common/fpga.c b/board/gdsys/common/fpga.c new file mode 100644 index 0000000000..e10c105feb --- /dev/null +++ b/board/gdsys/common/fpga.c @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <gdsys_fpga.h> + +#include <asm/io.h> + +int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) +{ + out_le16(reg, data); + + return 0; +} + +int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) +{ + *data = in_le16(reg); + + return 0; +} diff --git a/board/gdsys/common/mclink.c b/board/gdsys/common/mclink.c new file mode 100644 index 0000000000..9f230c9a97 --- /dev/null +++ b/board/gdsys/common/mclink.c @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> + +#include <gdsys_fpga.h> + +enum { + MCINT_SLAVE_LINK_CHANGED_EV = 1 << 7, + MCINT_TX_ERROR_EV = 1 << 9, + MCINT_TX_BUFFER_FREE = 1 << 10, + MCINT_TX_PACKET_TRANSMITTED_EV = 1 << 11, + MCINT_RX_ERROR_EV = 1 << 13, + MCINT_RX_CONTENT_AVAILABLE = 1 << 14, + MCINT_RX_PACKET_RECEIVED_EV = 1 << 15, +}; + +int mclink_probe(void) +{ + unsigned int k; + int slaves = 0; + + for (k = 0; k < CONFIG_SYS_MCLINK_MAX; ++k) { + int timeout = 0; + unsigned int ctr = 0; + u16 mc_status; + + FPGA_GET_REG(k, mc_status, &mc_status); + + if (!(mc_status & (1 << 15))) + break; + + FPGA_SET_REG(k, mc_control, 0x8000); + + FPGA_GET_REG(k, mc_status, &mc_status); + while (!(mc_status & (1 << 14))) { + udelay(100); + if (ctr++ > 500) { + timeout = 1; + break; + } + FPGA_GET_REG(k, mc_status, &mc_status); + } + if (timeout) + break; + + printf("waited %d us for mclink %d to come up\n", ctr * 100, k); + + slaves++; + } + + return slaves; +} + +int mclink_send(u8 slave, u16 addr, u16 data) +{ + unsigned int ctr = 0; + u16 int_status; + u16 rx_cmd_status; + u16 rx_cmd; + + /* reset interrupt status */ + FPGA_GET_REG(0, mc_int, &int_status); + FPGA_SET_REG(0, mc_int, int_status); + + /* send */ + FPGA_SET_REG(0, mc_tx_address, addr); + FPGA_SET_REG(0, mc_tx_data, data); + FPGA_SET_REG(0, mc_tx_cmd, (slave & 0x03) << 14); + FPGA_SET_REG(0, mc_control, 0x8001); + + /* wait for reply */ + FPGA_GET_REG(0, mc_int, &int_status); + while (!(int_status & MCINT_RX_PACKET_RECEIVED_EV)) { + udelay(100); + if (ctr++ > 3) + return -ETIMEDOUT; + FPGA_GET_REG(0, mc_int, &int_status); + } + + FPGA_GET_REG(0, mc_rx_cmd_status, &rx_cmd_status); + rx_cmd = (rx_cmd_status >> 12) & 0x03; + if (rx_cmd != 0) + printf("mclink_send: received cmd %d, expected %d\n", rx_cmd, + 0); + + return 0; +} + +int mclink_receive(u8 slave, u16 addr, u16 *data) +{ + u16 rx_cmd_status; + u16 rx_cmd; + u16 int_status; + unsigned int ctr = 0; + + /* send read request */ + FPGA_SET_REG(0, mc_tx_address, addr); + FPGA_SET_REG(0, mc_tx_cmd, + ((slave & 0x03) << 14) | (1 << 12) | (1 << 0)); + FPGA_SET_REG(0, mc_control, 0x8001); + + + /* wait for reply */ + FPGA_GET_REG(0, mc_int, &int_status); + while (!(int_status & MCINT_RX_CONTENT_AVAILABLE)) { + udelay(100); + if (ctr++ > 3) + return -ETIMEDOUT; + FPGA_GET_REG(0, mc_int, &int_status); + } + + /* check reply */ + FPGA_GET_REG(0, mc_rx_cmd_status, &rx_cmd_status); + if ((rx_cmd_status >> 14) != slave) { + printf("mclink_receive: reply from slave %d, expected %d\n", + rx_cmd_status >> 14, slave); + return -EINVAL; + } + + rx_cmd = (rx_cmd_status >> 12) & 0x03; + if (rx_cmd != 1) { + printf("mclink_send: received cmd %d, expected %d\n", + rx_cmd, 1); + return -EIO; + } + + FPGA_GET_REG(0, mc_rx_data, data); + + return 0; +} diff --git a/board/gdsys/common/mclink.h b/board/gdsys/common/mclink.h new file mode 100644 index 0000000000..febd46a70e --- /dev/null +++ b/board/gdsys/common/mclink.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MCLINK_H_ +#define _MCLINK_H_ + +int mclink_probe(void); +int mclink_send(u8 slave, u16 addr, u16 data); +int mclink_receive(u8 slave, u16 addr, u16 *data); + +#endif diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 45cea5eaaf..c49cd9a619 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -7,7 +7,7 @@ #include <common.h> #include <i2c.h> -#include <asm/io.h> +#include <malloc.h> #include <gdsys_fpga.h> @@ -26,10 +26,6 @@ #define PIXCLK_640_480_60 25180000 -#define BASE_WIDTH 32 -#define BASE_HEIGHT 16 -#define BUFSIZE (BASE_WIDTH * BASE_HEIGHT) - enum { CH7301_CM = 0x1c, /* Clock Mode Register */ CH7301_IC = 0x1d, /* Input Clock Register */ @@ -51,37 +47,55 @@ enum { CH7301_DSP = 0x56, /* DVI Sync polarity Register */ }; +unsigned int base_width; +unsigned int base_height; +size_t bufsize; +u16 *buf; + +unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1; + +#ifdef CONFIG_SYS_CH7301 +int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; +#endif + #if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178) static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); - struct ihs_i2c *i2c = &fpga->i2c; + u16 val; - while (in_le16(&fpga->extended_interrupt) & (1 << 12)) - ; - out_le16(&i2c->write_mailbox_ext, reg | (data << 8)); - out_le16(&i2c->write_mailbox, 0xc400 | (slave << 1)); + do { + FPGA_GET_REG(screen, extended_interrupt, &val); + } while (val & (1 << 12)); + + FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg | (data << 8)); + FPGA_SET_REG(screen, i2c.write_mailbox, 0xc400 | (slave << 1)); } static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); - struct ihs_i2c *i2c = &fpga->i2c; unsigned int ctr = 0; + u16 val; + + do { + FPGA_GET_REG(screen, extended_interrupt, &val); + } while (val & (1 << 12)); - while (in_le16(&fpga->extended_interrupt) & (1 << 12)) - ; - out_le16(&fpga->extended_interrupt, 1 << 14); - out_le16(&i2c->write_mailbox_ext, reg); - out_le16(&i2c->write_mailbox, 0xc000 | (slave << 1)); - while (!(in_le16(&fpga->extended_interrupt) & (1 << 14))) { + FPGA_SET_REG(screen, extended_interrupt, 1 << 14); + FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg); + FPGA_SET_REG(screen, i2c.write_mailbox, 0xc000 | (slave << 1)); + + FPGA_GET_REG(screen, extended_interrupt, &val); + while (!(val & (1 << 14))) { udelay(100000); if (ctr++ > 5) { printf("iic receive timeout\n"); break; } + FPGA_GET_REG(screen, extended_interrupt, &val); } - return in_le16(&i2c->read_mailbox_ext) >> 8; + + FPGA_GET_REG(screen, i2c.read_mailbox_ext, &val); + return val >> 8; } #endif @@ -113,7 +127,6 @@ static void mpc92469ac_calc_parameters(unsigned int fout, static void mpc92469ac_set(unsigned screen, unsigned int fout) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); unsigned int n; unsigned int m; unsigned int bitval = 0; @@ -134,7 +147,7 @@ static void mpc92469ac_set(unsigned screen, unsigned int fout) break; } - out_le16(&fpga->mpc3w_control, (bitval << 9) | m); + FPGA_SET_REG(screen, mpc3w_control, (bitval << 9) | m); } #endif @@ -249,14 +262,12 @@ static void ics8n3qv01_set(unsigned screen, unsigned int fout) static int osd_write_videomem(unsigned screen, unsigned offset, u16 *data, size_t charcount) { - struct ihs_fpga *fpga = - (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(screen); unsigned int k; for (k = 0; k < charcount; ++k) { - if (offset + k >= BUFSIZE) + if (offset + k >= bufsize) return -1; - out_le16(&fpga->videomem + offset + k, data[k]); + FPGA_SET_REG(screen, videomem[offset + k], data[k]); } return charcount; @@ -266,14 +277,13 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned screen; - for (screen = 0; screen < CONFIG_SYS_OSD_SCREENS; ++screen) { + for (screen = 0; screen <= max_osd_screen; ++screen) { unsigned x; unsigned y; unsigned charcount; unsigned len; u8 color; unsigned int k; - u16 buf[BUFSIZE]; char *text; int res; @@ -287,12 +297,12 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) color = simple_strtoul(argv[3], NULL, 16); text = argv[4]; charcount = strlen(text); - len = (charcount > BUFSIZE) ? BUFSIZE : charcount; + len = (charcount > bufsize) ? bufsize : charcount; for (k = 0; k < len; ++k) buf[k] = (text[k] << 8) | color; - res = osd_write_videomem(screen, y * BASE_WIDTH + x, buf, len); + res = osd_write_videomem(screen, y * base_width + x, buf, len); if (res < 0) return res; } @@ -302,24 +312,32 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int osd_probe(unsigned screen) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); - struct ihs_osd *osd = &fpga->osd; - u16 version = in_le16(&osd->version); - u16 features = in_le16(&osd->features); - unsigned width; - unsigned height; + u16 version; + u16 features; u8 value; +#ifdef CONFIG_SYS_CH7301 + int old_bus = i2c_get_bus_num(); +#endif - width = ((features & 0x3f00) >> 8) + 1; - height = (features & 0x001f) + 1; + FPGA_GET_REG(0, osd.version, &version); + FPGA_GET_REG(0, osd.features, &features); + + base_width = ((features & 0x3f00) >> 8) + 1; + base_height = (features & 0x001f) + 1; + bufsize = base_width * base_height; + buf = malloc(sizeof(u16) * bufsize); + if (!buf) + return -1; printf("OSD%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n", - screen, version/100, version%100, width, height); + screen, version/100, version%100, base_width, base_height); #ifdef CONFIG_SYS_CH7301 + i2c_set_bus_num(ch7301_i2c[screen]); value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); if (value != 0x17) { printf(" Probing CH7301 failed, DID %02x\n", value); + i2c_set_bus_num(old_bus); return -1; } i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); @@ -327,6 +345,7 @@ int osd_probe(unsigned screen) i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); + i2c_set_bus_num(old_bus); #endif #ifdef CONFIG_SYS_MPC92469AC @@ -356,12 +375,15 @@ int osd_probe(unsigned screen) fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); #endif - out_le16(&fpga->videocontrol, 0x0002); - out_le16(&osd->control, 0x0049); + FPGA_SET_REG(screen, videocontrol, 0x0002); + FPGA_SET_REG(screen, osd.control, 0x0049); + + FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1)); + FPGA_SET_REG(screen, osd.x_pos, 0x007f); + FPGA_SET_REG(screen, osd.y_pos, 0x005f); - out_le16(&osd->xy_size, ((32 - 1) << 8) | (16 - 1)); - out_le16(&osd->x_pos, 0x007f); - out_le16(&osd->y_pos, 0x005f); + if (screen > max_osd_screen) + max_osd_screen = screen; return 0; } @@ -370,11 +392,11 @@ int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned screen; - for (screen = 0; screen < CONFIG_SYS_OSD_SCREENS; ++screen) { + for (screen = 0; screen <= max_osd_screen; ++screen) { unsigned x; unsigned y; unsigned k; - u16 buffer[BASE_WIDTH]; + u16 buffer[base_width]; char *rp; u16 *wp = buffer; unsigned count = (argc > 4) ? @@ -399,13 +421,13 @@ int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) rp += 4; wp++; - if (wp - buffer > BASE_WIDTH) + if (wp - buffer > base_width) break; } for (k = 0; k < count; ++k) { unsigned offset = - y * BASE_WIDTH + x + k * (wp - buffer); + y * base_width + x + k * (wp - buffer); osd_write_videomem(screen, offset, buffer, wp - buffer); } diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c index a24c22b1ad..9e91f68eb0 100644 --- a/board/isee/igep0033/board.c +++ b/board/isee/igep0033/board.c @@ -27,9 +27,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* MII mode defines */ -#define RMII_MODE_ENABLE 0x4D - static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; #ifdef CONFIG_SPL_BUILD @@ -158,7 +155,8 @@ int board_eth_init(bd_t *bis) eth_setenv_enetaddr("ethaddr", mac_addr); } - writel(RMII_MODE_ENABLE, &cdev->miisel); + writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN), + &cdev->miisel); rv = cpsw_register(&cpsw_data); if (rv < 0) diff --git a/board/jse/init.S b/board/jse/init.S index bccc7e0992..7b918b558d 100644 --- a/board/jse/init.S +++ b/board/jse/init.S @@ -1,28 +1,6 @@ -/*------------------------------------------------------------------------+ */ -/* */ -/* This source code is dual-licensed. You may use it under the terms */ -/* of the GNU General Public License version 2, or under the license */ -/* below. */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------- */ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ /* Description: Initializes the External Bus Controller for the external */ diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c index f9bb6ab2bc..6ab263a4d9 100644 --- a/board/mpl/common/pci.c +++ b/board/mpl/common/pci.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of -| the GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1995 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /* * Adapted for PIP405 03.07.01 * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index 39a1d6829a..bf886c05c0 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -1,26 +1,6 @@ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-------------------------------------------------------------------------------*/ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init * Description: Initializes the External Bus Controller for the external diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S index b77517fd5a..9ed27990a1 100644 --- a/board/mpl/pip405/init.S +++ b/board/mpl/pip405/init.S @@ -1,26 +1,6 @@ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-------------------------------------------------------------------------------*/ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init * Description: Initializes the External Bus Controller for the external diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index f53c5bbd4b..e40b0bd44d 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -31,8 +31,6 @@ DECLARE_GLOBAL_DATA_PTR; /* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0xA #define RMII_RGMII2_MODE_ENABLE 0x49 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; diff --git a/board/samsung/common/multi_i2c.c b/board/samsung/common/multi_i2c.c index 4fce987540..084858defa 100644 --- a/board/samsung/common/multi_i2c.c +++ b/board/samsung/common/multi_i2c.c @@ -11,13 +11,12 @@ /* Handle multiple I2C buses instances */ int get_multi_scl_pin(void) { - unsigned int bus = I2C_GET_BUS(); + unsigned int bus = i2c_get_bus_num(); switch (bus) { - case I2C_0: /* I2C_0 definition - compatibility layer */ - case I2C_5: + case I2C_0: return CONFIG_SOFT_I2C_I2C5_SCL; - case I2C_9: + case I2C_1: return CONFIG_SOFT_I2C_I2C9_SCL; default: printf("I2C_%d not supported!\n", bus); @@ -28,13 +27,12 @@ int get_multi_scl_pin(void) int get_multi_sda_pin(void) { - unsigned int bus = I2C_GET_BUS(); + unsigned int bus = i2c_get_bus_num(); switch (bus) { - case I2C_0: /* I2C_0 definition - compatibility layer */ - case I2C_5: + case I2C_0: return CONFIG_SOFT_I2C_I2C5_SDA; - case I2C_9: + case I2C_1: return CONFIG_SOFT_I2C_I2C9_SDA; default: printf("I2C_%d not supported!\n", bus); diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index 80ffe3047a..1e94c7f82c 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ ARCH_CPU_DTS +/include/ "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts index dca3386cf2..7832e4edda 100644 --- a/board/samsung/dts/exynos5250-snow.dts +++ b/board/samsung/dts/exynos5250-snow.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ ARCH_CPU_DTS +/include/ "exynos5250.dtsi" / { model = "Google Snow"; diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 4ddff04f41..366f648d32 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -32,7 +32,11 @@ int power_init_board(void) { int ret; - ret = pmic_init(I2C_5); + /* + * For PMIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + */ + ret = pmic_init(I2C_0); if (ret) return ret; diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index c8698f30df..7f61d17abb 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -61,10 +61,10 @@ void i2c_init_board(void) struct exynos4_gpio_part2 *gpio2 = (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); - /* I2C_5 -> PMIC */ + /* I2C_5 -> PMIC -> Adapter 0 */ s5p_gpio_direction_output(&gpio1->b, 7, 1); s5p_gpio_direction_output(&gpio1->b, 6, 1); - /* I2C_9 -> FG */ + /* I2C_9 -> FG -> Adapter 1 */ s5p_gpio_direction_output(&gpio2->y4, 0, 1); s5p_gpio_direction_output(&gpio2->y4, 1, 1); } @@ -282,10 +282,17 @@ int power_init_board(void) struct power_battery *pb; struct pmic *p_fg, *p_chrg, *p_muic, *p_bat; - ret = pmic_init(I2C_5); + /* + * For PMIC/MUIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + * + * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected + * to logical I2C adapter 1 + */ + ret = pmic_init(I2C_0); ret |= pmic_init_max8997(); - ret |= power_fg_init(I2C_9); - ret |= power_muic_init(I2C_5); + ret |= power_fg_init(I2C_1); + ret |= power_muic_init(I2C_0); ret |= power_bat_init(0); if (ret) return ret; diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 2e1dba6a48..54d0e1e0e3 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -45,6 +45,10 @@ int power_init_board(void) { int ret; + /* + * For PMIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + */ ret = pmic_init(I2C_5); if (ret) return ret; diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index dee8710316..837851838d 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -65,8 +65,8 @@ local_bus_init(void) get_sys_info(&sysinfo); - lbc_mhz = sysinfo.freqLocalBus / 1000000; - clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus; + lbc_mhz = sysinfo.freq_localbus / 1000000; + clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus; debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz); diff --git a/board/sc3/init.S b/board/sc3/init.S index 635236835a..9921f8fc4f 100644 --- a/board/sc3/init.S +++ b/board/sc3/init.S @@ -1,31 +1,6 @@ -/*------------------------------------------------------------------------------+ - * - * This souce code has been made available to you by EuroDesign - * (www.eurodsn.de). It's based on the original IBM source code, so - * this follows: - * - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *------------------------------------------------------------------------------- */ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h index 77498b6e1d..5596d27133 100644 --- a/board/scb9328/intel.h +++ b/board/scb9328/intel.h @@ -2,28 +2,7 @@ * Copyright (C) 2002 ETC s.r.o. * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the ETC s.r.o. nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause * * Written by Marcel Telka <marcel@telka.sk>, 2002. * diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c new file mode 100644 index 0000000000..6279c3281c --- /dev/null +++ b/board/siemens/common/board.c @@ -0,0 +1,171 @@ +/* + * Common board functions for siemens AM335X based boards + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/board/ti/am335x/board.c + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <watchdog.h> +#include "../common/factoryset.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(); +} + +void sdram_init(void) +{ + spl_siemens_board_init(); + board_init_ddr(); + + return; +} +#endif /* #ifdef CONFIG_SPL_BUILD */ + +#ifndef CONFIG_SPL_BUILD +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ +#if defined(CONFIG_HW_WATCHDOG) + hw_watchdog_init(); +#endif /* defined(CONFIG_HW_WATCHDOG) */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_FACTORYSET + factoryset_read_eeprom(CONFIG_SYS_I2C_EEPROM_ADDR); +#endif + gpmc_init(); + +#ifdef CONFIG_VIDEO + board_video_init(); +#endif + + return 0; +} +#endif /* #ifndef CONFIG_SPL_BUILD */ + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + omap_nand_switch_ecc(1, 8); + + return 0; +} +#endif + +#ifndef CONFIG_SPL_BUILD +#if defined(BOARD_DFU_BUTTON_GPIO) +/* + * This command returns the status of the user button on + * Input - none + * Returns - 1 if button is held down + * 0 if button is not held down + */ +static int +do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int button = 0; + int gpio; + + gpio = BOARD_DFU_BUTTON_GPIO; + gpio_request(gpio, "DFU"); + gpio_direction_input(gpio); + if (gpio_get_value(gpio)) + button = 1; + else + button = 0; + + gpio_free(gpio); + if (!button) { + /* LED0 - RED=1: GPIO2_0 2*32 = 64 */ + gpio_request(BOARD_DFU_BUTTON_LED, ""); + gpio_direction_output(BOARD_DFU_BUTTON_LED, 1); + gpio_set_value(BOARD_DFU_BUTTON_LED, 1); + } + + return button; +} + +U_BOOT_CMD( + dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton, + "Return the status of the DFU button", + "" +); +#endif + +static int +do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + printf("\n\n\n Go into infinite loop\n\n\n"); + while (1) + ; + return 0; +}; + +U_BOOT_CMD( + testwdt, CONFIG_SYS_MAXARGS, 1, do_usertestwdt, + "Sends U-Boot into infinite loop", + "" +); + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + printf("Enable d-cache\n"); + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif /* CONFIG_SYS_DCACHE_OFF */ +#endif /* !CONFIG_SPL_BUILD */ diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c new file mode 100644 index 0000000000..eda9141c54 --- /dev/null +++ b/board/siemens/common/factoryset.c @@ -0,0 +1,284 @@ +/* + * + * Read FactorySet information from EEPROM into global structure. + * (C) Copyright 2013 Siemens Schweiz AG + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#if !defined(CONFIG_SPL_BUILD) + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/unaligned.h> +#include <net.h> +#include <usbdescriptors.h> +#include "factoryset.h" + +#define EEPR_PG_SZ 0x80 +#define EEPROM_FATORYSET_OFFSET 0x400 +#define OFF_PG EEPROM_FATORYSET_OFFSET/EEPR_PG_SZ + +/* Global variable that contains necessary information from FactorySet */ +struct factorysetcontainer factory_dat; + +#define fact_get_char(i) *((char *)&eeprom_buf[i]) + +static int fact_match(unsigned char *eeprom_buf, uchar *s1, int i2) +{ + if (s1 == NULL) + return -1; + + while (*s1 == fact_get_char(i2++)) + if (*s1++ == '=') + return i2; + + if (*s1 == '\0' && fact_get_char(i2-1) == '=') + return i2; + + return -1; +} + +static int get_factory_val(unsigned char *eeprom_buf, int size, uchar *name, + uchar *buf, int len) +{ + int i, nxt = 0; + + for (i = 0; fact_get_char(i) != '\0'; i = nxt + 1) { + int val, n; + + for (nxt = i; fact_get_char(nxt) != '\0'; ++nxt) { + if (nxt >= size) + return -1; + } + + val = fact_match(eeprom_buf, (uchar *)name, i); + if (val < 0) + continue; + + /* found; copy out */ + for (n = 0; n < len; ++n, ++buf) { + *buf = fact_get_char(val++); + if (*buf == '\0') + return n; + } + + if (n) + *--buf = '\0'; + + printf("env_buf [%d bytes] too small for value of \"%s\"\n", + len, name); + + return n; + } + return -1; +} + +static +int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record, + uchar *name, uchar *buf, int len) +{ + int ret = -1; + int i, nxt = 0; + int c; + unsigned char end = 0xff; + + for (i = 0; fact_get_char(i) != end; i = nxt) { + nxt = i + 1; + if (fact_get_char(i) == '>') { + int pos; + int endpos; + int z; + + c = strncmp((char *)&eeprom_buf[i + 1], (char *)record, + strlen((char *)record)); + if (c == 0) { + /* record found */ + pos = i + strlen((char *)record) + 2; + nxt = pos; + /* search for "<" */ + c = -1; + for (z = pos; fact_get_char(z) != end; z++) { + if ((fact_get_char(z) == '<') || + (fact_get_char(z) == '>')) { + endpos = z; + nxt = endpos; + c = 0; + break; + } + } + } + if (c == 0) { + /* end found -> call get_factory_val */ + eeprom_buf[endpos] = end; + ret = get_factory_val(&eeprom_buf[pos], + size - pos, name, buf, len); + /* fix buffer */ + eeprom_buf[endpos] = '<'; + debug("%s: %s.%s = %s\n", + __func__, record, name, buf); + return ret; + } + } + } + return ret; +} + +int factoryset_read_eeprom(int i2c_addr) +{ + int i, pages = 0, size = 0; + unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH]; + unsigned char *cp, *cp1; + +#if defined(CONFIG_DFU_FUNCTION) + factory_dat.usb_vendor_id = CONFIG_G_DNL_VENDOR_NUM; + factory_dat.usb_product_id = CONFIG_G_DNL_PRODUCT_NUM; +#endif + if (i2c_probe(i2c_addr)) + goto err; + + if (i2c_read(i2c_addr, EEPROM_FATORYSET_OFFSET, 2, hdr, sizeof(hdr))) + goto err; + + if ((hdr[0] != 0x99) || (hdr[1] != 0x80)) { + printf("FactorySet is not right in eeprom.\n"); + return 1; + } + + /* get FactorySet size */ + size = (hdr[2] << 8) + hdr[3] + sizeof(hdr); + if (size > 0x3bfa) + size = 0x3bfa; + + pages = size / EEPR_PG_SZ; + + /* + * read the eeprom using i2c + * I can not read entire eeprom in once, so separate into several + * times. Furthermore, fetch eeprom take longer time, so we fetch + * data after every time we got a record from eeprom + */ + debug("Read eeprom page :\n"); + for (i = 0; i < pages; i++) + if (i2c_read(i2c_addr, (OFF_PG + i) * EEPR_PG_SZ, 2, + eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ)) + goto err; + + if (size % EEPR_PG_SZ) + if (i2c_read(i2c_addr, (OFF_PG + pages) * EEPR_PG_SZ, 2, + eeprom_buf + (pages * EEPR_PG_SZ), + (size % EEPR_PG_SZ))) + goto err; + + /* we do below just for eeprom align */ + for (i = 0; i < size; i++) + if (eeprom_buf[i] == '\n') + eeprom_buf[i] = 0; + + /* skip header */ + size -= sizeof(hdr); + cp = (uchar *)eeprom_buf + sizeof(hdr); + + /* get mac address */ + get_factory_record_val(cp, size, (uchar *)"ETH1", (uchar *)"mac", + buf, MAX_STRING_LENGTH); + cp1 = buf; + for (i = 0; i < 6; i++) { + factory_dat.mac[i] = simple_strtoul((char *)cp1, NULL, 16); + cp1 += 3; + } + +#if defined(CONFIG_DFU_FUNCTION) + /* read vid and pid for dfu mode */ + if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1", + (uchar *)"vid", buf, + MAX_STRING_LENGTH)) { + factory_dat.usb_vendor_id = simple_strtoul((char *)buf, + NULL, 16); + } + + if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1", + (uchar *)"pid", buf, + MAX_STRING_LENGTH)) { + factory_dat.usb_product_id = simple_strtoul((char *)buf, + NULL, 16); + } + printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id, + factory_dat.usb_product_id); +#endif + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"id", buf, + MAX_STRING_LENGTH)) { + if (strncmp((const char *)buf, "PXM50", 5) == 0) + factory_dat.pxm50 = 1; + else + factory_dat.pxm50 = 0; + } + debug("PXM50: %d\n", factory_dat.pxm50); +#if defined(CONFIG_VIDEO) + if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1", + (uchar *)"name", factory_dat.disp_name, + MAX_STRING_LENGTH)) { + debug("display name: %s\n", factory_dat.disp_name); + } + +#endif + return 0; + +err: + printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n"); + return 1; +} + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static int factoryset_mac_setenv(void) +{ + uint8_t mac_addr[6]; + + debug("FactorySet: Set mac address\n"); + if (is_valid_ether_addr(factory_dat.mac)) { + memcpy(mac_addr, factory_dat.mac, 6); + } else { + uint32_t mac_hi, mac_lo; + + debug("Warning: FactorySet: <ethaddr> not set. Fallback to E-fuse\n"); + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + if (!is_valid_ether_addr(mac_addr)) { + printf("Warning: ethaddr not set by FactorySet or E-fuse. Set <ethaddr> variable to overcome this.\n"); + return -1; + } + } + + eth_setenv_enetaddr("ethaddr", mac_addr); + return 0; +} + +int factoryset_setenv(void) +{ + int ret = 0; + + if (factoryset_mac_setenv() < 0) + ret = -1; + + return ret; +} + +int g_dnl_bind_fixup(struct usb_device_descriptor *dev) +{ + put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor); + put_unaligned(factory_dat.usb_product_id, &dev->idProduct); + return 0; +} +#endif /* defined(CONFIG_SPL_BUILD) */ diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h new file mode 100644 index 0000000000..445f3842da --- /dev/null +++ b/board/siemens/common/factoryset.h @@ -0,0 +1,27 @@ +/* + * Common board functions for siemens AM335X based boards + * (C) Copyright 2013 Siemens Schweiz AG + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FACTORYSET_H +#define __FACTORYSET_H + +#define MAX_STRING_LENGTH 32 + +struct factorysetcontainer { + uchar mac[6]; + int usb_vendor_id; + int usb_product_id; + int pxm50; +#if defined(CONFIG_VIDEO) + unsigned char disp_name[MAX_STRING_LENGTH]; +#endif +}; + +int factoryset_read_eeprom(int i2c_addr); +int factoryset_setenv(void); +extern struct factorysetcontainer factory_dat; + +#endif /* __FACTORYSET_H */ diff --git a/board/siemens/dxr2/Makefile b/board/siemens/dxr2/Makefile new file mode 100644 index 0000000000..a09b467d5a --- /dev/null +++ b/board/siemens/dxr2/Makefile @@ -0,0 +1,49 @@ +# +# Makefile +# +# (C) Copyright 2013 Siemens Schweiz AG +# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# Based on: +# u-boot:/board/ti/am335x/Makefile +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +ifndef CONFIG_SPL_BUILD +COBJS += ../common/factoryset.o +endif +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c new file mode 100644 index 0000000000..af9d84f128 --- /dev/null +++ b/board/siemens/dxr2/board.c @@ -0,0 +1,241 @@ +/* + * Board functions for TI AM335X based dxr2 board + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * + * Board functions for TI AM335X based boards + * u-boot:/board/ti/am335x/board.c + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <watchdog.h> +#include "board.h" +#include "../common/factoryset.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; + +const struct ddr3_data ddr3_default = { + 0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B, + 0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2, + 0x00000618, +}; + +static void set_default_ddr3_timings(void) +{ + printf("Set default DDR3 settings\n"); + settings.ddr3 = ddr3_default; +} + +static void print_ddr3_timings(void) +{ + printf("\n\nDDR3 Timing parameters:\n"); + printf("Diff Eeprom Default\n"); + PRINTARGS(magic); + PRINTARGS(version); + PRINTARGS(ddr3_sratio); + PRINTARGS(iclkout); + + PRINTARGS(dt0rdsratio0); + PRINTARGS(dt0wdsratio0); + PRINTARGS(dt0fwsratio0); + PRINTARGS(dt0wrsratio0); + + PRINTARGS(sdram_tim1); + PRINTARGS(sdram_tim2); + PRINTARGS(sdram_tim3); + + PRINTARGS(emif_ddr_phy_ctlr_1); + + PRINTARGS(sdram_config); + PRINTARGS(ref_ctrl); +} + +static void print_chip_data(void) +{ + printf("\n"); + printf("Device: '%s'\n", settings.chip.sdevname); + printf("HW version: '%s'\n", settings.chip.shwver); +} +#endif /* CONFIG_SPL_BUILD */ + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n"); + return 1; + } + +#ifdef CONFIG_SPL_BUILD + /* Read Siemens eeprom data (DDR3) */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2, + (uchar *)&settings.ddr3, sizeof(struct ddr3_data))) { + printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n"); + set_default_ddr3_timings(); + } + /* Read Siemens eeprom data (CHIP) */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2, + (uchar *)&settings.chip, sizeof(settings.chip))) + printf("Could not read chip settings\n"); + + if (ddr3_default.magic == settings.ddr3.magic && + ddr3_default.version == settings.ddr3.version) { + printf("Using DDR3 settings from EEPROM\n"); + } else { + if (ddr3_default.magic != settings.ddr3.magic) + printf("Error: No valid DDR3 data in eeprom.\n"); + if (ddr3_default.version != settings.ddr3.version) + printf("Error: DDR3 data version does not match.\n"); + + printf("Using default settings\n"); + set_default_ddr3_timings(); + } + + if (MAGIC_CHIP == settings.chip.magic) { + printf("Valid chip data in eeprom\n"); + print_chip_data(); + } else { + printf("Error: No chip data in eeprom\n"); + } + + print_ddr3_timings(); +#endif + return 0; +} + +#ifdef CONFIG_SPL_BUILD +static void board_init_ddr(void) +{ +struct emif_regs dxr2_ddr3_emif_reg_data = { + .zq_config = 0x50074BE4, +}; + +struct ddr_data dxr2_ddr3_data = { + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +struct cmd_control dxr2_ddr3_cmd_ctrl_data = { + .cmd0dldiff = 0, + .cmd1dldiff = 0, + .cmd2dldiff = 0, +}; + /* pass values from eeprom */ + dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; + dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; + dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; + dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = + settings.ddr3.emif_ddr_phy_ctlr_1; + dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; + dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; + + dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; + dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; + dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; + dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; + + dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; + dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; + dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; + dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; + dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; + dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; + + config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data, + &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); +} + +static void spl_siemens_board_init(void) +{ + return; +} +#endif /* if def CONFIG_SPL_BUILD */ + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_MII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 4, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + int n = 0; + int rv; + + factoryset_setenv(); + + /* Set rgmii mode and enable rmii clock to be sourced from chip */ + writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + return n; +} +#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ + +#include "../common/board.c" diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h new file mode 100644 index 0000000000..2be78fbab2 --- /dev/null +++ b/board/siemens/dxr2/board.h @@ -0,0 +1,69 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \ + settings.ddr3.x, ddr3_default.x +#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y)) +#define MAGIC_CHIP 0x50494843 + +/* Automatic generated definition */ +/* Wed, 19 Jun 2013 10:57:48 +0200 */ +/* From file: draco/ddr3-data-micron.txt */ +struct ddr3_data { + unsigned int magic; /* 0x33524444 */ + unsigned int version; /* 0x56312e33 */ + unsigned short int ddr3_sratio; /* 0x0100 */ + unsigned short int iclkout; /* 0x0001 */ + unsigned short int dt0rdsratio0; /* 0x003A */ + unsigned short int dt0wdsratio0; /* 0x008A */ + unsigned short int dt0fwsratio0; /* 0x010B */ + unsigned short int dt0wrsratio0; /* 0x00C4 */ + unsigned int sdram_tim1; /* 0x0888A39B */ + unsigned int sdram_tim2; /* 0x26247FDA */ + unsigned int sdram_tim3; /* 0x501F821F */ + unsigned short int emif_ddr_phy_ctlr_1; /* 0x0006 */ + unsigned int sdram_config; /* 0x61C04AB2 */ + unsigned int ref_ctrl; /* 0x00000618 */ +}; + +struct chip_data { + unsigned int magic; + char sdevname[16]; + char shwver[7]; +}; + +struct dxr2_baseboard_id { + struct ddr3_data ddr3; + struct chip_data chip; +}; + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c new file mode 100644 index 0000000000..bc80b79d7e --- /dev/null +++ b/board/siemens/dxr2/mux.c @@ -0,0 +1,112 @@ +/* + * pinmux setup for siemens dxr2 board + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/mux.c + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + +static struct module_pin_mux gpios_pin_mux[] = { + /* DFU button GPIO0_27*/ + {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)}, + {OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */ + {OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */ + {-1}, +}; + +static struct module_pin_mux ethernet_pin_mux[] = { + {OFFSET(mii1_col), (MODE(3) | RXACTIVE)}, + {OFFSET(mii1_crs), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxerr), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_txen), (MODE(1))}, + {OFFSET(mii1_rxdv), (MODE(3) | RXACTIVE)}, + {OFFSET(mii1_txd3), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd2), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd1), (MODE(1))}, + {OFFSET(mii1_txd0), (MODE(1))}, + {OFFSET(mii1_txclk), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxclk), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd3), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd2), (MODE(1))}, + {OFFSET(mii1_rxd1), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd0), (MODE(1) | RXACTIVE)}, + {OFFSET(rmii1_refclk), (MODE(0) | RXACTIVE)}, + {OFFSET(mdio_data), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_uart3_pin_mux(void) +{ + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + enable_uart3_pin_mux(); + configure_module_pin_mux(nand_pin_mux); + configure_module_pin_mux(ethernet_pin_mux); + configure_module_pin_mux(gpios_pin_mux); +} diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile new file mode 100644 index 0000000000..a09b467d5a --- /dev/null +++ b/board/siemens/pxm2/Makefile @@ -0,0 +1,49 @@ +# +# Makefile +# +# (C) Copyright 2013 Siemens Schweiz AG +# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# Based on: +# u-boot:/board/ti/am335x/Makefile +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +ifndef CONFIG_SPL_BUILD +COBJS += ../common/factoryset.o +endif +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c new file mode 100644 index 0000000000..2c1841f8ae --- /dev/null +++ b/board/siemens/pxm2/board.c @@ -0,0 +1,429 @@ +/* + * Board functions for TI AM335X based pxm2 board + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/board.c + * + * Board functions for TI AM335X based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include "../../../drivers/video/da8xx-fb.h" +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <watchdog.h> +#include "board.h" +#include "../common/factoryset.h" +#include "pmic.h" +#include <nand.h> +#include <bmp_layout.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +static void board_init_ddr(void) +{ +struct emif_regs pxm2_ddr3_emif_reg_data = { + .sdram_config = 0x41805332, + .sdram_tim1 = 0x666b3c9, + .sdram_tim2 = 0x243631ca, + .sdram_tim3 = 0x33f, + .emif_ddr_phy_ctlr_1 = 0x100005, + .zq_config = 0, + .ref_ctrl = 0x81a, +}; + +struct ddr_data pxm2_ddr3_data = { + .datardsratio0 = 0x81204812, + .datawdsratio0 = 0, + .datafwsratio0 = 0x8020080, + .datawrsratio0 = 0x4010040, + .datauserank0delay = 1, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +struct cmd_control pxm2_ddr3_cmd_ctrl_data = { + .cmd0csratio = 0x80, + .cmd0dldiff = 0, + .cmd0iclkout = 0, + .cmd1csratio = 0x80, + .cmd1dldiff = 0, + .cmd1iclkout = 0, + .cmd2csratio = 0x80, + .cmd2dldiff = 0, + .cmd2iclkout = 0, +}; + + config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &pxm2_ddr3_data, + &pxm2_ddr3_cmd_ctrl_data, &pxm2_ddr3_emif_reg_data, 0); +} + +/* + * voltage switching for MPU frequency switching. + * @module = mpu - 0, core - 1 + * @vddx_op_vol_sel = vdd voltage to set + */ + +#define MPU 0 +#define CORE 1 + +int voltage_update(unsigned int module, unsigned char vddx_op_vol_sel) +{ + uchar buf[4]; + unsigned int reg_offset; + + if (module == MPU) + reg_offset = PMIC_VDD1_OP_REG; + else + reg_offset = PMIC_VDD2_OP_REG; + + /* Select VDDx OP */ + if (i2c_read(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + buf[0] &= ~PMIC_OP_REG_CMD_MASK; + + if (i2c_write(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + /* Configure VDDx OP Voltage */ + if (i2c_read(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + buf[0] &= ~PMIC_OP_REG_SEL_MASK; + buf[0] |= vddx_op_vol_sel; + + if (i2c_write(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + if (i2c_read(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + if ((buf[0] & PMIC_OP_REG_SEL_MASK) != vddx_op_vol_sel) + return 1; + + return 0; +} + +#define OSC (V_OSCK/1000000) + +const struct dpll_params dpll_mpu_pxm2 = { + 720, OSC-1, 1, -1, -1, -1, -1}; + +void spl_siemens_board_init(void) +{ + uchar buf[4]; + /* + * pxm2 PMIC code. All boards currently want an MPU voltage + * of 1.2625V and CORE voltage of 1.1375V to operate at + * 720MHz. + */ + if (i2c_probe(PMIC_CTRL_I2C_ADDR)) + return; + + /* VDD1/2 voltage selection register access by control i/f */ + if (i2c_read(PMIC_CTRL_I2C_ADDR, PMIC_DEVCTRL_REG, 1, buf, 1)) + return; + + buf[0] |= PMIC_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C; + + if (i2c_write(PMIC_CTRL_I2C_ADDR, PMIC_DEVCTRL_REG, 1, buf, 1)) + return; + + /* Frequency switching for OPP 120 */ + if (voltage_update(MPU, PMIC_OP_REG_SEL_1_2_6) || + voltage_update(CORE, PMIC_OP_REG_SEL_1_1_3)) { + printf("voltage update failed\n"); + } +} +#endif /* if def CONFIG_SPL_BUILD */ + +int read_eeprom(void) +{ + /* nothing ToDo here for this board */ + + return 0; +} + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 4, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + int n = 0; +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; +#ifdef CONFIG_FACTORYSET + int rv; + if (!is_valid_ether_addr(factory_dat.mac)) + printf("Error: no valid mac address\n"); + else + eth_setenv_enetaddr("ethaddr", factory_dat.mac); +#endif /* #ifdef CONFIG_FACTORYSET */ + + /* Set rgmii mode and enable rmii clock to be sourced from chip */ + writel(RGMII_MODE_ENABLE , &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; +#endif + return n; +} +#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +static struct da8xx_panel lcd_panels[] = { + /* AUO G156XW01 V1 */ + [0] = { + .name = "AUO_G156XW01_V1", + .width = 1376, + .height = 768, + .hfp = 14, + .hbp = 64, + .hsw = 56, + .vfp = 1, + .vbp = 28, + .vsw = 3, + .pxl_clk = 60000000, + .invert_pxl_clk = 0, + }, + /* AUO B101EVN06 V0 */ + [1] = { + .name = "AUO_B101EVN06_V0", + .width = 1280, + .height = 800, + .hfp = 52, + .hbp = 84, + .hsw = 36, + .vfp = 3, + .vbp = 14, + .vsw = 6, + .pxl_clk = 60000000, + .invert_pxl_clk = 0, + }, + /* + * Settings from factoryset + * stored in EEPROM + */ + [2] = { + .name = "factoryset", + .width = 0, + .height = 0, + .hfp = 0, + .hbp = 0, + .hsw = 0, + .vfp = 0, + .vbp = 0, + .vsw = 0, + .pxl_clk = 60000000, + .invert_pxl_clk = 0, + }, +}; + +static const struct display_panel disp_panel = { + WVGA, + 32, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 32, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + +static int set_gpio(int gpio, int state) +{ + gpio_request(gpio, "temp"); + gpio_direction_output(gpio, state); + gpio_set_value(gpio, state); + gpio_free(gpio); + return 0; +} + +static int enable_backlight(void) +{ + set_gpio(BOARD_LCD_POWER, 1); + set_gpio(BOARD_BACK_LIGHT, 1); + set_gpio(BOARD_TOUCH_POWER, 1); + return 0; +} + +static int enable_pwm(void) +{ + struct pwmss_regs *pwmss = (struct pwmss_regs *)PWMSS0_BASE; + struct pwmss_ecap_regs *ecap; + int ticks = PWM_TICKS; + int duty = PWM_DUTY; + + ecap = (struct pwmss_ecap_regs *)AM33XX_ECAP0_BASE; + /* enable clock */ + setbits_le32(&pwmss->clkconfig, ECAP_CLK_EN); + /* TimeStam Counter register */ + writel(0xdb9, &ecap->tsctr); + /* config period */ + writel(ticks - 1, &ecap->cap3); + writel(ticks - 1, &ecap->cap1); + setbits_le16(&ecap->ecctl2, + (ECTRL2_MDSL_ECAP | ECTRL2_SYNCOSEL_MASK | 0xd0)); + /* config duty */ + writel(duty, &ecap->cap2); + writel(duty, &ecap->cap4); + /* start */ + setbits_le16(&ecap->ecctl2, ECTRL2_CTRSTP_FREERUN); + return 0; +} + +static struct dpll_regs dpll_lcd_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x98, + .cm_idlest_dpll = CM_WKUP + 0x48, + .cm_clksel_dpll = CM_WKUP + 0x54, +}; + +/* no console on this board */ +int board_cfb_skip(void) +{ + return 1; +} + +#define PLL_GET_M(v) ((v >> 8) & 0x7ff) +#define PLL_GET_N(v) (v & 0x7f) + +static int get_clk(struct dpll_regs *dpll_regs) +{ + unsigned int val; + unsigned int m, n; + int f = 0; + + val = readl(dpll_regs->cm_clksel_dpll); + m = PLL_GET_M(val); + n = PLL_GET_N(val); + f = (m * V_OSCK) / n; + + return f; +}; + +int clk_get(int clk) +{ + return get_clk(&dpll_lcd_regs); +}; + +static int conf_disp_pll(int m, int n) +{ + struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; + struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; + struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1}; + + u32 *const clk_domains[] = { + &cmper->lcdclkctrl, + 0 + }; + u32 *const clk_modules_explicit_en[] = { + &cmper->lcdclkctrl, + &cmper->lcdcclkstctrl, + &cmper->epwmss0clkctrl, + 0 + }; + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); + writel(0x0, &cmdpll->clklcdcpixelclk); + + do_setup_dpll(&dpll_lcd_regs, &dpll_lcd); + + return 0; +} + +static int board_video_init(void) +{ + /* set 300 MHz */ + conf_disp_pll(25, 2); + if (factory_dat.pxm50) + da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp); + else + da8xx_video_init(&lcd_panels[1], &lcd_cfg, lcd_cfg.bpp); + + enable_pwm(); + enable_backlight(); + + return 0; +} +#endif +#include "../common/board.c" diff --git a/board/siemens/pxm2/board.h b/board/siemens/pxm2/board.h new file mode 100644 index 0000000000..03626129de --- /dev/null +++ b/board/siemens/pxm2/board.h @@ -0,0 +1,22 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/siemens/pxm2/mux.c b/board/siemens/pxm2/mux.c new file mode 100644 index 0000000000..c64b0d23d5 --- /dev/null +++ b/board/siemens/pxm2/mux.c @@ -0,0 +1,186 @@ +/* + * pinmux setup for siemens pxm2 board + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {OFFSET(nnmi), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_TXD */ + {-1}, +}; + +#ifdef CONFIG_NAND +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUP_EN}, /* RGMII2_RD0 */ + {OFFSET(mcasp0_ahclkx), MODE(7) | PULLUDEN}, /* MCASP0_AHCLKX */ + {-1}, +}; +#endif + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +#ifndef CONFIG_NO_ETH +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux rgmii2_pin_mux[] = { + {OFFSET(gpmc_a0), MODE(2)}, /* RGMII2_TCTL */ + {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII2_RCTL */ + {OFFSET(gpmc_a2), MODE(2)}, /* RGMII2_TD3 */ + {OFFSET(gpmc_a3), MODE(2)}, /* RGMII2_TD2 */ + {OFFSET(gpmc_a4), MODE(2)}, /* RGMII2_TD1 */ + {OFFSET(gpmc_a5), MODE(2)}, /* RGMII2_TD0 */ + {OFFSET(gpmc_a6), MODE(7)}, /* RGMII2_TCLK */ + {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII2_RCLK */ + {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII2_RD3 */ + {OFFSET(gpmc_a9), MODE(7)}, /* RGMII2_RD2 */ + {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII2_RD1 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; +#endif + +#ifdef CONFIG_MMC +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUDEN)}, /* MMC0_CD */ + {-1}, +}; +#endif + +static struct module_pin_mux lcdc_pin_mux[] = { + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD_DAT0 */ + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD_DAT1 */ + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD_DAT2 */ + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD_DAT3 */ + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD_DAT4 */ + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD_DAT5 */ + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD_DAT6 */ + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD_DAT7 */ + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD_DAT8 */ + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD_DAT9 */ + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD_DAT10 */ + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD_DAT11 */ + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD_DAT12 */ + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD_DAT13 */ + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD_DAT14 */ + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD_DAT15 */ + {OFFSET(gpmc_ad8), (MODE(1))}, /* LCD_DAT16 */ + {OFFSET(gpmc_ad9), (MODE(1))}, /* LCD_DAT17 */ + {OFFSET(gpmc_ad10), (MODE(1))}, /* LCD_DAT18 */ + {OFFSET(gpmc_ad11), (MODE(1))}, /* LCD_DAT19 */ + {OFFSET(gpmc_ad12), (MODE(1))}, /* LCD_DAT20 */ + {OFFSET(gpmc_ad13), (MODE(1))}, /* LCD_DAT21 */ + {OFFSET(gpmc_ad14), (MODE(1))}, /* LCD_DAT22 */ + {OFFSET(gpmc_ad15), (MODE(1))}, /* LCD_DAT23 */ + {OFFSET(lcd_vsync), (MODE(0))}, /* LCD_VSYNC */ + {OFFSET(lcd_hsync), (MODE(0))}, /* LCD_HSYNC */ + {OFFSET(lcd_pclk), (MODE(0))}, /* LCD_PCLK */ + {OFFSET(lcd_ac_bias_en), (MODE(0))}, /* LCD_AC_BIAS_EN */ + {-1}, +}; + +static struct module_pin_mux ecap0_pin_mux[] = { + {OFFSET(ecap0_in_pwm0_out), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux gpio_pin_mux[] = { + {OFFSET(mcasp0_fsx), MODE(7)}, /* GPIO3_15 LCD power*/ + {OFFSET(mcasp0_axr0), MODE(7)}, /* GPIO3_16 Backlight */ + {OFFSET(gpmc_a9), MODE(7)}, /* GPIO1_25 Touch power */ + {-1}, +}; +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); + configure_module_pin_mux(i2c1_pin_mux); +#ifdef CONFIG_NAND + configure_module_pin_mux(nand_pin_mux); +#endif +#ifndef CONFIG_NO_ETH + configure_module_pin_mux(rgmii1_pin_mux); + configure_module_pin_mux(rgmii2_pin_mux); +#endif +#ifdef CONFIG_MMC + configure_module_pin_mux(mmc0_pin_mux); +#endif + configure_module_pin_mux(lcdc_pin_mux); + configure_module_pin_mux(gpio_pin_mux); + configure_module_pin_mux(ecap0_pin_mux); +} diff --git a/board/siemens/pxm2/pmic.h b/board/siemens/pxm2/pmic.h new file mode 100644 index 0000000000..c6347e5129 --- /dev/null +++ b/board/siemens/pxm2/pmic.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef PMIC_H +#define PMIC_H + +/* + * The PMIC on this board is a TPS65910. + */ + +#define PMIC_SR_I2C_ADDR 0x12 +#define PMIC_CTRL_I2C_ADDR 0x2D +/* PMIC Register offsets */ +#define PMIC_VDD1_REG 0x21 +#define PMIC_VDD1_OP_REG 0x22 +#define PMIC_VDD2_REG 0x24 +#define PMIC_VDD2_OP_REG 0x25 +#define PMIC_DEVCTRL_REG 0x3f + +/* VDD2 & VDD1 control register (VDD2_REG & VDD1_REG) */ +#define PMIC_VGAIN_SEL_MASK (0x3 << 6) +#define PMIC_ILMAX_MASK (0x1 << 5) +#define PMIC_TSTEP_MASK (0x7 << 2) +#define PMIC_ST_MASK (0x3) + +#define PMIC_REG_VGAIN_SEL_X1 (0x0 << 6) +#define PMIC_REG_VGAIN_SEL_X1_0 (0x1 << 6) +#define PMIC_REG_VGAIN_SEL_X3 (0x2 << 6) +#define PMIC_REG_VGAIN_SEL_X4 (0x3 << 6) + +#define PMIC_REG_ILMAX_1_0_A (0x0 << 5) +#define PMIC_REG_ILMAX_1_5_A (0x1 << 5) + +#define PMIC_REG_TSTEP_ (0x0 << 2) +#define PMIC_REG_TSTEP_12_5 (0x1 << 2) +#define PMIC_REG_TSTEP_9_4 (0x2 << 2) +#define PMIC_REG_TSTEP_7_5 (0x3 << 2) +#define PMIC_REG_TSTEP_6_25 (0x4 << 2) +#define PMIC_REG_TSTEP_4_7 (0x5 << 2) +#define PMIC_REG_TSTEP_3_12 (0x6 << 2) +#define PMIC_REG_TSTEP_2_5 (0x7 << 2) + +#define PMIC_REG_ST_OFF (0x0) +#define PMIC_REG_ST_ON_HI_POW (0x1) +#define PMIC_REG_ST_OFF_1 (0x2) +#define PMIC_REG_ST_ON_LOW_POW (0x3) + + +/* VDD2 & VDD1 voltage selection register. (VDD2_OP_REG & VDD1_OP_REG) */ +#define PMIC_OP_REG_SEL (0x7F) + +#define PMIC_OP_REG_CMD_MASK (0x1 << 7) +#define PMIC_OP_REG_CMD_OP (0x0 << 7) +#define PMIC_OP_REG_CMD_SR (0x1 << 7) + +#define PMIC_OP_REG_SEL_MASK (0x7F) +#define PMIC_OP_REG_SEL_1_1_3 (0x2E) /* 1.1375 V */ +#define PMIC_OP_REG_SEL_1_2_6 (0x38) /* 1.2625 V */ + +/* Device control register . (DEVCTRL_REG) */ +#define PMIC_DEVCTRL_REG_SR_CTL_I2C_MASK (0x1 << 4) +#define PMIC_DEVCTRL_REG_SR_CTL_I2C_SEL_SR_I2C (0x0 << 4) +#define PMIC_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C (0x1 << 4) + +#endif diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile new file mode 100644 index 0000000000..a09b467d5a --- /dev/null +++ b/board/siemens/rut/Makefile @@ -0,0 +1,49 @@ +# +# Makefile +# +# (C) Copyright 2013 Siemens Schweiz AG +# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# Based on: +# u-boot:/board/ti/am335x/Makefile +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +ifndef CONFIG_SPL_BUILD +COBJS += ../common/factoryset.o +endif +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c new file mode 100644 index 0000000000..f2b0476817 --- /dev/null +++ b/board/siemens/rut/board.c @@ -0,0 +1,432 @@ +/* + * Board functions for TI AM335X based rut board + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/board.c + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spi.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <video.h> +#include <watchdog.h> +#include "board.h" +#include "../common/factoryset.h" +#include "../../../drivers/video/da8xx-fb.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + return 0; +} + +#ifdef CONFIG_SPL_BUILD +static void board_init_ddr(void) +{ +struct emif_regs rut_ddr3_emif_reg_data = { + .sdram_config = 0x61C04AB2, + .sdram_tim1 = 0x0888A39B, + .sdram_tim2 = 0x26337FDA, + .sdram_tim3 = 0x501F830F, + .emif_ddr_phy_ctlr_1 = 0x6, + .zq_config = 0x50074BE4, + .ref_ctrl = 0x93B, +}; + +struct ddr_data rut_ddr3_data = { + .datardsratio0 = 0x3b, + .datawdsratio0 = 0x85, + .datafwsratio0 = 0x100, + .datawrsratio0 = 0xc1, + .datauserank0delay = 1, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +struct cmd_control rut_ddr3_cmd_ctrl_data = { + .cmd0csratio = 0x40, + .cmd0dldiff = 0, + .cmd0iclkout = 1, + .cmd1csratio = 0x40, + .cmd1dldiff = 0, + .cmd1iclkout = 1, + .cmd2csratio = 0x40, + .cmd2dldiff = 0, + .cmd2iclkout = 1, +}; + + config_ddr(DDR_PLL_FREQ, RUT_IOCTRL_VAL, &rut_ddr3_data, + &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0); +} + +static void spl_siemens_board_init(void) +{ + return; +} +#endif /* if def CONFIG_SPL_BUILD */ + +#if defined(CONFIG_DRIVER_TI_CPSW) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 1, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + int n = 0; + int rv; + +#ifndef CONFIG_SPL_BUILD + factoryset_setenv(); +#endif + + /* Set rgmii mode and enable rmii clock to be sourced from chip */ + writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + return n; +} +#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ + +#if defined(CONFIG_HW_WATCHDOG) +static bool hw_watchdog_init_done; +static int hw_watchdog_trigger_level; + +void hw_watchdog_reset(void) +{ + if (!hw_watchdog_init_done) + return; + + hw_watchdog_trigger_level = hw_watchdog_trigger_level ? 0 : 1; + gpio_set_value(WATCHDOG_TRIGGER_GPIO, hw_watchdog_trigger_level); +} + +void hw_watchdog_init(void) +{ + gpio_request(WATCHDOG_TRIGGER_GPIO, "watchdog_trigger"); + gpio_direction_output(WATCHDOG_TRIGGER_GPIO, hw_watchdog_trigger_level); + + hw_watchdog_reset(); + + hw_watchdog_init_done = 1; +} +#endif /* defined(CONFIG_HW_WATCHDOG) */ + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +static struct da8xx_panel lcd_panels[] = { + /* FORMIKE, 4.3", 480x800, KWH043MC17-F01 */ + [0] = { + .name = "KWH043MC17-F01", + .width = 480, + .height = 800, + .hfp = 50, /* no spec, "don't care" values */ + .hbp = 50, + .hsw = 50, + .vfp = 50, + .vbp = 50, + .vsw = 50, + .pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */ + .invert_pxl_clk = 1, + }, + /* FORMIKE, 4.3", 480x800, KWH043ST20-F01 */ + [1] = { + .name = "KWH043ST20-F01", + .width = 480, + .height = 800, + .hfp = 50, /* no spec, "don't care" values */ + .hbp = 50, + .hsw = 50, + .vfp = 50, + .vbp = 50, + .vsw = 50, + .pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */ + .invert_pxl_clk = 1, + }, + /* Multi-Inno, 4.3", 480x800, MI0430VT-1 */ + [2] = { + .name = "MI0430VT-1", + .width = 480, + .height = 800, + .hfp = 50, /* no spec, "don't care" values */ + .hbp = 50, + .hsw = 50, + .vfp = 50, + .vbp = 50, + .vsw = 50, + .pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */ + .invert_pxl_clk = 1, + }, +}; + +static const struct display_panel disp_panels[] = { + [0] = { + WVGA, + 16, /* RGB 888 */ + 16, + COLOR_ACTIVE, + }, + [1] = { + WVGA, + 16, /* RGB 888 */ + 16, + COLOR_ACTIVE, + }, + [2] = { + WVGA, + 24, /* RGB 888 */ + 16, + COLOR_ACTIVE, + }, +}; + +static const struct lcd_ctrl_config lcd_cfgs[] = { + [0] = { + &disp_panels[0], + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, + }, + [1] = { + &disp_panels[1], + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, + }, + [2] = { + &disp_panels[2], + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 24, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, + }, + +}; + +/* no console on this board */ +int board_cfb_skip(void) +{ + return 1; +} + +#define PLL_GET_M(v) ((v >> 8) & 0x7ff) +#define PLL_GET_N(v) (v & 0x7f) + +static struct dpll_regs dpll_lcd_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x98, + .cm_idlest_dpll = CM_WKUP + 0x48, + .cm_clksel_dpll = CM_WKUP + 0x54, +}; + +static int get_clk(struct dpll_regs *dpll_regs) +{ + unsigned int val; + unsigned int m, n; + int f = 0; + + val = readl(dpll_regs->cm_clksel_dpll); + m = PLL_GET_M(val); + n = PLL_GET_N(val); + f = (m * V_OSCK) / n; + + return f; +}; + + + +int clk_get(int clk) +{ + return get_clk(&dpll_lcd_regs); +}; + +static int conf_disp_pll(int m, int n) +{ + struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; + struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; + struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1}; +#if defined(DISPL_PLL_SPREAD_SPECTRUM) + struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; +#endif + + u32 *const clk_domains[] = { + &cmper->lcdclkctrl, + 0 + }; + u32 *const clk_modules_explicit_en[] = { + &cmper->lcdclkctrl, + &cmper->lcdcclkstctrl, + &cmper->spi1clkctrl, + 0 + }; + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); + /* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */ + writel(0x0, &cmdpll->clklcdcpixelclk); + + do_setup_dpll(&dpll_lcd_regs, &dpll_lcd); + +#if defined(DISPL_PLL_SPREAD_SPECTRUM) + writel(0x64, &cmwkup->resv6[3]); /* 0x50 */ + writel(0x800, &cmwkup->resv6[2]); /* 0x4c */ + writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12), + &cmwkup->clkmoddplldisp); /* 0x98 */ +#endif + return 0; +} + +static int set_gpio(int gpio, int state) +{ + gpio_request(gpio, "temp"); + gpio_direction_output(gpio, state); + gpio_set_value(gpio, state); + gpio_free(gpio); + return 0; +} + +static int enable_lcd(void) +{ + unsigned char buf[1]; + + set_gpio(BOARD_LCD_RESET, 1); + + /* spi lcd init */ + kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3); + + /* backlight on */ + buf[0] = 0xf; + i2c_write(0x24, 0x7, 1, buf, 1); + buf[0] = 0x3f; + i2c_write(0x24, 0x8, 1, buf, 1); + return 0; +} + +int arch_early_init_r(void) +{ + enable_lcd(); + return 0; +} + +static int board_video_init(void) +{ + int i; + int anzdisp = ARRAY_SIZE(lcd_panels); + int display = 1; + + for (i = 0; i < anzdisp; i++) { + if (strncmp((const char *)factory_dat.disp_name, + lcd_panels[i].name, + strlen((const char *)factory_dat.disp_name)) == 0) { + printf("DISPLAY: %s\n", factory_dat.disp_name); + break; + } + } + if (i == anzdisp) { + i = 1; + printf("%s: %s not found, using default %s\n", __func__, + factory_dat.disp_name, lcd_panels[i].name); + } + conf_disp_pll(25, 2); + da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display], + lcd_cfgs[display].bpp); + + return 0; +} + + +#endif /* ifdef CONFIG_VIDEO */ +#include "../common/board.c" diff --git a/board/siemens/rut/board.h b/board/siemens/rut/board.h new file mode 100644 index 0000000000..03626129de --- /dev/null +++ b/board/siemens/rut/board.h @@ -0,0 +1,22 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/siemens/rut/mux.c b/board/siemens/rut/mux.c new file mode 100644 index 0000000000..1eced013c7 --- /dev/null +++ b/board/siemens/rut/mux.c @@ -0,0 +1,347 @@ +/* + * pinmux setup for siemens rut board + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux ddr_pin_mux[] = { + {OFFSET(ddr_resetn), (MODE(0))}, + {OFFSET(ddr_csn0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ck), (MODE(0))}, + {OFFSET(ddr_nck), (MODE(0))}, + {OFFSET(ddr_casn), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_rasn), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_wen), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ba0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ba1), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ba2), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a1), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a2), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a3), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a4), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a5), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a6), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a7), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a8), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a9), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a10), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a11), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a12), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a13), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a14), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a15), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_odt), (MODE(0))}, + {OFFSET(ddr_d0), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d1), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d2), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d3), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d4), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d5), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d6), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d7), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d8), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d9), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d10), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d11), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d12), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d13), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d14), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d15), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_dqm0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_dqm1), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_dqs0), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_dqsn0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(ddr_dqs1), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_dqsn1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(ddr_vref), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ddr_vtp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux lcd_pin_mux[] = { + {OFFSET(gpmc_ad8), (MODE(1))}, + {OFFSET(gpmc_ad9), (MODE(1))}, + {OFFSET(gpmc_ad10), (MODE(1))}, + {OFFSET(gpmc_ad11), (MODE(1))}, + {OFFSET(gpmc_ad12), (MODE(1))}, + {OFFSET(gpmc_ad13), (MODE(1))}, + {OFFSET(gpmc_ad14), (MODE(1))}, + {OFFSET(gpmc_ad15), (MODE(1))}, + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_vsync), (MODE(0))}, + {OFFSET(lcd_hsync), (MODE(0))}, + {OFFSET(lcd_pclk), (MODE(0))}, + {OFFSET(lcd_ac_bias_en), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux mii_pin_mux[] = { + {OFFSET(mii1_crs), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxerr), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_txen), (MODE(1))}, + {OFFSET(mii1_txd1), (MODE(1))}, + {OFFSET(mii1_txd0), (MODE(1))}, + {OFFSET(mii1_rxd1), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd0), (MODE(1) | RXACTIVE)}, + {OFFSET(rmii1_refclk), (MODE(0) | RXACTIVE)}, + {OFFSET(mdio_data), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux gpio_pin_mux[] = { + {OFFSET(mii1_col), (MODE(7) | RXACTIVE)}, + {OFFSET(uart1_ctsn), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart1_rtsn), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart1_rxd), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart1_txd), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(mii1_rxdv), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd3), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd2), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txclk), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_rxclk), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_rxd3), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_rxd2), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a0), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a1), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a4), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a5), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a6), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a7), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a8), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a9), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a10), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a11), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_wpn), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_be1n), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_csn1), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_csn2), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_csn3), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_aclkr), (MODE(7) | RXACTIVE)}, + {OFFSET(mcasp0_fsr), (MODE(7))}, + {OFFSET(mcasp0_axr1), (MODE(7) | RXACTIVE)}, + {OFFSET(mcasp0_ahclkx), (MODE(7) | RXACTIVE)}, + {OFFSET(xdma_event_intr0), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(xdma_event_intr1), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux usb0_pin_mux[] = { + {OFFSET(usb0_dm), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_dp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_ce), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_id), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_vbus), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_drvvbus), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux usb1_pin_mux[] = { + {OFFSET(usb1_dm), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_dp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_ce), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_id), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_vbus), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_drvvbus), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux spi0_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_cs1), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux spi1_pin_mux[] = { + {OFFSET(mcasp0_aclkx), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_fsx), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_axr0), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_ahclkr), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux jtag_pin_mux[] = { + {OFFSET(tms), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(tdi), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(tdo), (MODE(0) | PULLUP_EN)}, + {OFFSET(tck), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(ntrst), (MODE(0) | RXACTIVE)}, + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad1), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad2), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad3), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad4), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad5), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad6), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad7), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_wen), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux ainx_pin_mux[] = { + {OFFSET(ain7), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain6), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain5), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain4), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain3), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain2), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain1), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain0), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux rtc_pin_mux[] = { + {OFFSET(osc1_in), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(osc1_out), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(rtc_porz), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(enz_kaldo_1p8v), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux gpmc_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_clk), (MODE(0) | RXACTIVE)}, + {-1}, +}; + +static struct module_pin_mux pmic_pin_mux[] = { + {OFFSET(pmic_power_en), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux osc_pin_mux[] = { + {OFFSET(osc0_in), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(osc0_out), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux pwm_pin_mux[] = { + {OFFSET(ecap0_in_pwm0_out), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(gpmc_a2), (MODE(6))}, + {OFFSET(gpmc_a3), (MODE(6))}, + {-1}, +}; + +static struct module_pin_mux emu_pin_mux[] = { + {OFFSET(emu0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(emu1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux vref_pin_mux[] = { + {OFFSET(vrefp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(vrefn), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux misc_pin_mux[] = { + {OFFSET(porz), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(nnmi), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ext_wakeup), (MODE(0) | RXACTIVE)}, + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(ddr_pin_mux); + configure_module_pin_mux(lcd_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mii_pin_mux); + configure_module_pin_mux(gpio_pin_mux); + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(usb0_pin_mux); + configure_module_pin_mux(usb1_pin_mux); + configure_module_pin_mux(spi0_pin_mux); + configure_module_pin_mux(spi1_pin_mux); + configure_module_pin_mux(jtag_pin_mux); + configure_module_pin_mux(nand_pin_mux); + configure_module_pin_mux(ainx_pin_mux); + configure_module_pin_mux(rtc_pin_mux); + configure_module_pin_mux(gpmc_pin_mux); + configure_module_pin_mux(pmic_pin_mux); + configure_module_pin_mux(osc_pin_mux); + configure_module_pin_mux(pwm_pin_mux); + configure_module_pin_mux(emu_pin_mux); + configure_module_pin_mux(vref_pin_mux); + configure_module_pin_mux(misc_pin_mux); +} diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 97fd0e4bd1..2caefbbe58 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -143,7 +143,7 @@ void local_bus_init (void) get_sys_info (&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv; /* Disable PLL bypass for Local Bus Clock >= 66 MHz */ if (lbc_mhz >= 66) diff --git a/board/ti/am335x/README b/board/ti/am335x/README index 67b524673a..2a30ab8981 100644 --- a/board/ti/am335x/README +++ b/board/ti/am335x/README @@ -13,7 +13,33 @@ documented in TI's reference designs: - AM335x EVM SK - Beaglebone White - Beaglebone Black -' + +Customization +============= + +Given that all of the above boards are reference platforms (and the +Beaglebone platforms are OSHA), it is likely that this platform code and +configuration will be used as the basis of a custom platform. It is +worth noting that aside from things such as NAND or MMC only being +required if a custom platform makes use of these blocks, the following +are required, depending on design: + +- GPIO is only required if DDR3 power is controlled in a way similar to + EVM SK +- SPI is only required for SPI flash, or exposing the SPI bus. + +The following blocks are required: +- I2C, to talk with the PMIC and ensure that we do not run afoul of + errata 1.0.24. + +When removing options as part of customization, +CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your +needs and to remove no longer relevant options as in some cases we +define additional text blocks (such as for NAND or DFU strings). Also +note that all of the SPL options are grouped together, rather than with +the IP blocks, so both areas will need their choices updated to reflect +the custom design. + NAND ==== diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 04c37e2db6..cc0442612f 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -30,10 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0x3A - /* GPIO that controls power to DDR on EVM-SK */ #define GPIO_DDR_VTT_EN 7 @@ -460,7 +456,7 @@ int board_eth_init(bd_t *bis) cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; } else { - writel(RGMII_MODE_ENABLE, &cdev->miisel); + writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII; } diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 2c00648470..47063309e5 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -14,10 +14,22 @@ #include "mux_data.h" +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> + +#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) +#define DIE_ID_REG_OFFSET 0x200 + +#endif + DECLARE_GLOBAL_DATA_PTR; const struct omap_sysinfo sysinfo = { - "Board: OMAP5430 EVM\n" + "Board: OMAP5432 uEVM\n" }; /** @@ -109,3 +121,85 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +#ifdef CONFIG_USB_EHCI +static struct omap_usbhs_board_data usbhs_bdata = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC, + .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, +}; + +static void enable_host_clocks(void) +{ + int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK | + OPTFCLKEN_HSIC480M_P3_CLK | + OPTFCLKEN_HSIC60M_P2_CLK | + OPTFCLKEN_HSIC480M_P2_CLK | + OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK); + + /* Enable port 2 and 3 clocks*/ + setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val); + + /* Enable port 2 and 3 usb host ports tll clocks*/ + setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, + (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE)); +} + +int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + int ret; + int auxclk; + int reg; + uint8_t device_mac[6]; + + enable_host_clocks(); + + if (!getenv("usbethaddr")) { + reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; + + /* + * create a fake MAC address from the processor ID code. + * first byte is 0x02 to signify locally administered. + */ + device_mac[0] = 0x02; + device_mac[1] = readl(reg + 0x10) & 0xff; + device_mac[2] = readl(reg + 0xC) & 0xff; + device_mac[3] = readl(reg + 0x8) & 0xff; + device_mac[4] = readl(reg) & 0xff; + device_mac[5] = (readl(reg) >> 8) & 0xff; + + eth_setenv_enetaddr("usbethaddr", device_mac); + } + + auxclk = readl((*prcm)->scrm_auxclk1); + /* Request auxilary clock */ + auxclk |= AUXCLK_ENABLE_MASK; + writel(auxclk, (*prcm)->scrm_auxclk1); + + ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + if (ret < 0) { + puts("Failed to initialize ehci\n"); + return ret; + } + + return 0; +} + +int ehci_hcd_stop(void) +{ + int ret; + + ret = omap_ehci_hcd_stop(); + return ret; +} + +void usb_hub_reset_devices(int port) +{ + /* The LAN9730 needs to be reset after the port power has been set. */ + if (port == 3) { + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0); + udelay(10); + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1); + } +} +#endif diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h index 612c13e479..31ce363b63 100644 --- a/board/ti/omap5_uevm/mux_data.h +++ b/board/ti/omap5_uevm/mux_data.h @@ -42,7 +42,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ - + {HSI2_ACWAKE, (PTU | M6)}, /* HSI2_ACWAKE */ + {HSI2_CAFLAG, (PTU | M6)}, /* HSI2_CAFLAG */ }; const struct pad_conf_entry wkup_padconf_array_essential[] = { @@ -50,6 +51,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = { {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ {SYS_32K, (IEN | M0)}, /* SYS_32K */ + {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */ }; diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 25daaa9ffb..79270a9e94 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -28,7 +28,6 @@ int board_init(void) { gpmc_init(); - gd->bd->bi_arch_number = MACH_TYPE_OMAP_4430SDP; gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ return 0; @@ -66,7 +65,8 @@ void set_muxconf_regs_essential(void) sizeof(wkup_padconf_array_essential) / sizeof(struct pad_conf_entry)); - if (omap_revision() >= OMAP4460_ES1_0) + if ((omap_revision() >= OMAP4460_ES1_0) && + (omap_revision() < OMAP4470_ES1_0)) do_set_mux((*ctrl)->control_padconf_wkup_base, wkup_padconf_array_essential_4460, sizeof(wkup_padconf_array_essential_4460) / diff --git a/board/w7o/init.S b/board/w7o/init.S index b3aadcace3..490411e6ee 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -1,26 +1,6 @@ -/****************************************************************************** - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - * - *****************************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c index 0daa189103..c128fcb53d 100644 --- a/board/xes/xpedite537x/ddr.c +++ b/board/xes/xpedite537x/ddr.c @@ -210,7 +210,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int datarate; get_sys_info(&sysinfo); - datarate = sysinfo.freqDDRBus / 1000 / 1000; + datarate = sysinfo.freq_ddrbus / 1000 / 1000; for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { if ((bopts[i].datarate_mhz_low <= datarate) && diff --git a/board/xilinx/microblaze-generic/dts/microblaze.dts b/board/xilinx/dts/microblaze-generic.dts index 203330987b..203330987b 100644 --- a/board/xilinx/microblaze-generic/dts/microblaze.dts +++ b/board/xilinx/dts/microblaze-generic.dts diff --git a/board/xilinx/dts/microblaze.dts b/board/xilinx/dts/microblaze.dts deleted file mode 100644 index bf984b0cfd..0000000000 --- a/board/xilinx/dts/microblaze.dts +++ /dev/null @@ -1 +0,0 @@ -/include/ BOARD_DTS diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 4bb140e29e..f7f1c59ac5 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -20,6 +20,7 @@ Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); +Xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100); #endif int board_init(void) @@ -42,6 +43,9 @@ int board_init(void) case XILINX_ZYNQ_7045: fpga = fpga045; break; + case XILINX_ZYNQ_7100: + fpga = fpga100; + break; } #endif @@ -61,6 +65,23 @@ int board_eth_init(bd_t *bis) { u32 ret = 0; +#ifdef CONFIG_XILINX_AXIEMAC + ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, + XILINX_AXIDMA_BASEADDR); +#endif +#ifdef CONFIG_XILINX_EMACLITE + u32 txpp = 0; + u32 rxpp = 0; +# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG + txpp = 1; +# endif +# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG + rxpp = 1; +# endif + ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, + txpp, rxpp); +#endif + #if defined(CONFIG_ZYNQ_GEM) # if defined(CONFIG_ZYNQ_GEM0) ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0, @@ -96,5 +117,7 @@ int dram_init(void) { gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + zynq_ddrc_init(); + return 0; } diff --git a/boards.cfg b/boards.cfg index 598561be29..b4297e568d 100644 --- a/boards.cfg +++ b/boards.cfg @@ -204,6 +204,7 @@ mx23evk arm arm926ejs mx23evk freesca m28evk arm arm926ejs m28evk denx mxs m28evk mx28evk arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_MMC mx28evk_nand arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_NAND +mx28evk_auart_console arm arm926ejs mx28evk freescale mxs mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC sc_sps_1 arm arm926ejs sc_sps_1 schulercontrol mxs nhk8815 arm arm926ejs nhk8815 st nomadik nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND @@ -254,6 +255,9 @@ am335x_evm_uart5 arm armv7 am335x ti am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT am335x_boneblack arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT am43xx_evm arm armv7 am43xx ti am33xx am43xx_evm:SERIAL1,CONS_INDEX=1 +dxr2 arm armv7 dxr2 siemens am33xx +pxm2 arm armv7 pxm2 siemens am33xx +rut arm armv7 rut siemens am33xx ti814x_evm arm armv7 ti814x ti am33xx ti816x_evm arm armv7 ti816x ti am33xx pcm051 arm armv7 pcm051 phytec am33xx pcm051 @@ -782,6 +786,8 @@ MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freesca MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND +C29XPCIE powerpc mpc85xx c29xpcie freescale - C29XPCIE:C29XPCIE,36BIT +C29XPCIE_SPIFLASH powerpc mpc85xx c29xpcie freescale - C29XPCIE:C29XPCIE,36BIT,SPIFLASH P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT P1010RDB_36BIT_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT @@ -812,16 +818,20 @@ P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freesca P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND -P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB -P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT -P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,NAND -P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SDCARD -P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SPIFLASH -P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND -P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD -P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH +P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC +P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT +P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,NAND +P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,SDCARD +P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,SPIFLASH +P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,NAND +P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,SDCARD +P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,SPIFLASH P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH +P1020RDB-PD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD +P1020RDB-PD_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,NAND +P1020RDB-PD_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,SDCARD +P1020RDB-PD_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,SPIFLASH P1020UTM-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM P1020UTM-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT P1020UTM-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT,SDCARD @@ -855,6 +865,7 @@ P1025RDB_36BIT powerpc mpc85xx p1_p2_rdb_pc freesca P1025RDB_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,NAND P1025RDB_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SDCARD P1025RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SPIFLASH +TWR-P1025 powerpc mpc85xx p1_twr freescale - p1_twr:TWR_P1025 P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB P2010RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT P2010RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SDCARD @@ -931,6 +942,7 @@ stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240 +T4240EMU powerpc mpc85xx t4qds freescale - T4240EMU:PPC_T4240 T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 T4240QDS_SRIO_PCIE_BOOT powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 @@ -1115,7 +1127,6 @@ PPChameleonEVB_ME_33 powerpc ppc4xx PPChameleonEVB dave APC405 powerpc ppc4xx apc405 esd AR405 powerpc ppc4xx ar405 esd ASH405 powerpc ppc4xx ash405 esd -CANBT powerpc ppc4xx canbt esd CMS700 powerpc ppc4xx cms700 esd CPCI2DP powerpc ppc4xx cpci2dp esd CPCI405 powerpc ppc4xx cpci405 esd diff --git a/common/Makefile b/common/Makefile index 87ba82e204..288690bca5 100644 --- a/common/Makefile +++ b/common/Makefile @@ -92,6 +92,7 @@ COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif +COBJS-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o COBJS-$(CONFIG_CMD_FUSE) += cmd_fuse.o COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index af884b8a6a..713de1464c 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -92,7 +92,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("immr_base", bd->bi_immr_base); #endif print_num("bootflags", bd->bi_bootflags); -#if defined(CONFIG_405CR) || defined(CONFIG_405EP) || \ +#if defined(CONFIG_405EP) || \ defined(CONFIG_405GP) || \ defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ @@ -106,7 +106,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) defined(CONFIG_440SPE) || defined(CONFIG_XILINX_405) print_mhz("pci_busfreq", bd->bi_pci_busfreq); #endif -#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ +#else /* ! CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ #if defined(CONFIG_CPM2) print_mhz("vco", bd->bi_vco); print_mhz("sccfreq", bd->bi_sccfreq); @@ -117,7 +117,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("cpmfreq", bd->bi_cpmfreq); #endif print_mhz("busfreq", bd->bi_busfreq); -#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ +#endif /* CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ #ifdef CONFIG_ENABLE_36BIT_PHYS #ifdef CONFIG_PHYS_64BIT diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 046e22ff48..1685c14a52 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -636,7 +636,7 @@ static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, goto err; else if (ret == BOOTM_ERR_OVERLAP) ret = 0; -#ifdef CONFIG_SILENT_CONSOLE +#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) if (images->os.os == IH_OS_LINUX) fixup_silent_linux(); #endif @@ -1384,9 +1384,19 @@ static void fixup_silent_linux(void) char *buf; const char *env_val; char *cmdline = getenv("bootargs"); + int want_silent; - /* Only fix cmdline when requested */ - if (!(gd->flags & GD_FLG_SILENT)) + /* + * Only fix cmdline when requested. The environment variable can be: + * + * no - we never fixup + * yes - we always fixup + * unset - we rely on the console silent flag + */ + want_silent = getenv_yesno("silent_linux"); + if (want_silent == 0) + return; + else if (want_silent == -1 && !(gd->flags & GD_FLG_SILENT)) return; debug("before silent fix-up: %s\n", cmdline); diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index db066acc36..793c422123 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -19,8 +19,8 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { const char *str_env; char *s = "dfu"; + int ret, i = 0; char *env_bkp; - int ret; if (argc < 3) return CMD_RET_USAGE; @@ -49,6 +49,15 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) g_dnl_register(s); while (1) { + if (dfu_reset()) + /* + * This extra number of usb_gadget_handle_interrupts() + * calls is necessary to assure correct transmission + * completion with dfu-util + */ + if (++i == 10) + goto exit; + if (ctrlc()) goto exit; @@ -60,6 +69,9 @@ done: dfu_free_entities(); free(env_bkp); + if (dfu_reset()) + run_command("reset", 0); + return CMD_RET_SUCCESS; } diff --git a/common/cmd_fpgad.c b/common/cmd_fpgad.c new file mode 100644 index 0000000000..1b25ed8747 --- /dev/null +++ b/common/cmd_fpgad.c @@ -0,0 +1,84 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * based on cmd_mem.c + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> + +#include <gdsys_fpga.h> + +static uint dp_last_fpga; +static uint dp_last_addr; +static uint dp_last_length = 0x40; + +/* + * FPGA Memory Display + * + * Syntax: + * fpgad {fpga} {addr} {len} + */ +#define DISP_LINE_LEN 16 +int do_fpga_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned int k; + unsigned int fpga; + ulong addr, length; + int rc = 0; + u16 linebuf[DISP_LINE_LEN/sizeof(u16)]; + + /* + * We use the last specified parameters, unless new ones are + * entered. + */ + fpga = dp_last_fpga; + addr = dp_last_addr; + length = dp_last_length; + + if (argc < 3) + return CMD_RET_USAGE; + + if ((flag & CMD_FLAG_REPEAT) == 0) { + /* + * FPGA is specified since argc > 2 + */ + fpga = simple_strtoul(argv[1], NULL, 16); + + /* + * Address is specified since argc > 2 + */ + addr = simple_strtoul(argv[2], NULL, 16); + + /* + * If another parameter, it is the length to display. + * Length is the number of objects, not number of bytes. + */ + if (argc > 3) + length = simple_strtoul(argv[3], NULL, 16); + } + + /* Print the lines. */ + for (k = 0; k < DISP_LINE_LEN / sizeof(u16); ++k) + fpga_get_reg(fpga, (u16 *)fpga_ptr[fpga] + k, k * sizeof(u16), + &linebuf[k]); + print_buffer(addr, (void *)linebuf, sizeof(u16), + length, DISP_LINE_LEN / sizeof(u16)); + addr += sizeof(u16)*length; + + dp_last_fpga = fpga; + dp_last_addr = addr; + dp_last_length = length; + return rc; +} + +U_BOOT_CMD( + fpgad, 4, 1, do_fpga_md, + "fpga register display", + "fpga address [# of objects]" +); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 29f5181baf..ebce7d4c3c 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1438,10 +1438,12 @@ int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("Current bus is %d\n", i2c_get_bus_num()); else { bus_no = simple_strtoul(argv[1], NULL, 10); +#if defined(CONFIG_SYS_I2C) if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) { printf("Invalid bus %d\n", bus_no); return -1; } +#endif printf("Setting bus to %d\n", bus_no); ret = i2c_set_bus_num(bus_no); if (ret) diff --git a/common/cmd_ini.c b/common/cmd_ini.c index 74481cbf6f..727fd1c664 100644 --- a/common/cmd_ini.c +++ b/common/cmd_ini.c @@ -6,30 +6,7 @@ * Joe Hershberger, National Instruments, joe.hershberger@ni.com * All rights reserved. * - * The "inih" library is distributed under the following license, which is - * derived from and very similar to the 3-clause BSD license: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Brush Technology nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY BRUSH TECHNOLOGY ''AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL BRUSH TECHNOLOGY BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause * * Go to the project home page for more info: * http://code.google.com/p/inih/ diff --git a/common/cmd_load.c b/common/cmd_load.c index 0ce949683e..f6e522cbb3 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_CMD_LOADB) -static ulong load_serial_ymodem(ulong offset); +static ulong load_serial_ymodem(ulong offset, int mode); #endif #if defined(CONFIG_CMD_LOADS) @@ -462,7 +462,15 @@ static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc, offset, load_baudrate); - addr = load_serial_ymodem(offset); + addr = load_serial_ymodem(offset, xyzModem_ymodem); + + } else if (strcmp(argv[0],"loadx")==0) { + printf("## Ready for binary (xmodem) download " + "to 0x%08lX at %d bps...\n", + offset, + load_baudrate); + + addr = load_serial_ymodem(offset, xyzModem_xmodem); } else { @@ -942,7 +950,7 @@ static int getcxmodem(void) { return (getc()); return -1; } -static ulong load_serial_ymodem(ulong offset) +static ulong load_serial_ymodem(ulong offset, int mode) { int size; int err; @@ -953,7 +961,7 @@ static ulong load_serial_ymodem(ulong offset) ulong addr = 0; size = 0; - info.mode = xyzModem_ymodem; + info.mode = mode; res = xyzModem_stream_open(&info, &err); if (!res) { @@ -1056,6 +1064,14 @@ U_BOOT_CMD( ); U_BOOT_CMD( + loadx, 3, 0, do_load_serial_bin, + "load binary file over serial line (xmodem mode)", + "[ off ] [ baud ]\n" + " - load binary file over serial line" + " with offset 'off' and baudrate 'baud'" +); + +U_BOOT_CMD( loady, 3, 0, do_load_serial_bin, "load binary file over serial line (ymodem mode)", "[ off ] [ baud ]\n" diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 886212aa07..04ab0f19be 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -42,6 +42,7 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) int i; u_char *datbuf, *oobbuf, *p; static loff_t last; + int ret = 0; if (repeat) off = last + nand->writesize; @@ -49,11 +50,17 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) last = off; datbuf = memalign(ARCH_DMA_MINALIGN, nand->writesize); - oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize); - if (!datbuf || !oobbuf) { + if (!datbuf) { puts("No memory for page buffer\n"); return 1; } + + oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize); + if (!oobbuf) { + puts("No memory for page buffer\n"); + ret = 1; + goto free_dat; + } off &= ~(nand->writesize - 1); loff_t addr = (loff_t) off; struct mtd_oob_ops ops; @@ -66,23 +73,25 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) i = mtd_read_oob(nand, addr, &ops); if (i < 0) { printf("Error (%d) reading page %08lx\n", i, off); - free(datbuf); - free(oobbuf); - return 1; + ret = 1; + goto free_all; } printf("Page %08lx dump:\n", off); - i = nand->writesize >> 4; - p = datbuf; - while (i--) { - if (!only_oob) + if (!only_oob) { + i = nand->writesize >> 4; + p = datbuf; + + while (i--) { printf("\t%02x %02x %02x %02x %02x %02x %02x %02x" " %02x %02x %02x %02x %02x %02x %02x %02x\n", p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]); - p += 16; + p += 16; + } } + puts("OOB:\n"); i = nand->oobsize >> 3; p = oobbuf; @@ -91,10 +100,13 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); p += 8; } - free(datbuf); + +free_all: free(oobbuf); +free_dat: + free(datbuf); - return 0; + return ret; } /* ------------------------------------------------------------------------- */ @@ -604,11 +616,11 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) opts.scrub = 1; else { puts("scrub aborted\n"); - return -1; + return 1; } } else { puts("scrub aborted\n"); - return -1; + return 1; } } ret = nand_erase_opts(nand, &opts); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 19b0dc9f43..4af0f0af26 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -151,16 +151,17 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, size_t len, const char *buf, char *cmp_buf, size_t *skipped) { debug("offset=%#x, sector_size=%#x, len=%#zx\n", - offset, flash->sector_size, len); + offset, flash->sector_size, len); if (spi_flash_read(flash, offset, len, cmp_buf)) return "read"; if (memcmp(cmp_buf, buf, len) == 0) { debug("Skip region %x size %zx: no change\n", - offset, len); + offset, len); *skipped += len; return NULL; } - if (spi_flash_erase(flash, offset, len)) + /* Erase the entire sector */ + if (spi_flash_erase(flash, offset, flash->sector_size)) return "erase"; if (spi_flash_write(flash, offset, len, buf)) return "write"; @@ -200,7 +201,7 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset, todo = min(end - buf, flash->sector_size); if (get_timer(last_update) > 100) { printf(" \rUpdating, %zu%% %lu B/s", - 100 - (end - buf) / scale, + 100 - (end - buf) / scale, bytes_per_second(buf - start_buf, start_time)); last_update = get_timer(0); @@ -220,9 +221,9 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset, delta = get_timer(start_time); printf("%zu bytes written, %zu bytes skipped", len - skipped, - skipped); + skipped); printf(" in %ld.%lds, speed %ld B/s\n", - delta / 1000, delta % 1000, bytes_per_second(len, start_time)); + delta / 1000, delta % 1000, bytes_per_second(len, start_time)); return 0; } @@ -252,7 +253,7 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) /* Consistency checking */ if (offset + len > flash->size) { printf("ERROR: attempting %s past flash size (%#x)\n", - argv[0], flash->size); + argv[0], flash->size); return 1; } @@ -262,9 +263,9 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) return 1; } - if (strcmp(argv[0], "update") == 0) + if (strcmp(argv[0], "update") == 0) { ret = spi_flash_update(flash, offset, len, buf); - else if (strncmp(argv[0], "read", 4) == 0 || + } else if (strncmp(argv[0], "read", 4) == 0 || strncmp(argv[0], "write", 5) == 0) { int read; @@ -275,7 +276,7 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) ret = spi_flash_write(flash, offset, len, buf); printf("SF: %zu bytes @ %#x %s: %s\n", (size_t)len, (u32)offset, - read ? "Read" : "Written", ret ? "ERROR" : "OK"); + read ? "Read" : "Written", ret ? "ERROR" : "OK"); } unmap_physmem(buf, len); @@ -304,13 +305,13 @@ static int do_spi_flash_erase(int argc, char * const argv[]) /* Consistency checking */ if (offset + len > flash->size) { printf("ERROR: attempting %s past flash size (%#x)\n", - argv[0], flash->size); + argv[0], flash->size); return 1; } ret = spi_flash_erase(flash, offset, len); printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)len, (u32)offset, - ret ? "ERROR" : "OK"); + ret ? "ERROR" : "OK"); return ret == 0 ? 0 : 1; } @@ -470,7 +471,8 @@ static int do_spi_flash_test(int argc, char * const argv[]) } #endif /* CONFIG_CMD_SF_TEST */ -static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { const char *cmd; int ret; @@ -526,7 +528,7 @@ U_BOOT_CMD( "SPI flash sub-system", "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n" " and chip select\n" - "sf read addr offset len - read `len' bytes starting at\n" + "sf read addr offset len - read `len' bytes starting at\n" " `offset' to memory at `addr'\n" "sf write addr offset len - write `len' bytes from memory\n" " at `addr' to flash at `offset'\n" diff --git a/common/env_common.c b/common/env_common.c index f387f9ab91..1ac337730c 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -140,7 +140,6 @@ int set_default_vars(int nvars, char * const vars[]) H_NOCLEAR | H_INTERACTIVE, nvars, vars); } -#ifndef CONFIG_SPL_BUILD /* * Check if CRC is valid and (if yes) import the environment. * Note that "buf" may or may not be aligned. @@ -172,7 +171,6 @@ int env_import(const char *buf, int check) return 0; } -#endif void env_relocate(void) { diff --git a/common/env_nand.c b/common/env_nand.c index 9a6b8a6fb2..75309621b0 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -152,72 +152,57 @@ int writeenv(size_t offset, u_char *buf) return 0; } -#ifdef CONFIG_ENV_OFFSET_REDUND -static unsigned char env_flags; +struct env_location { + const char *name; + const nand_erase_options_t erase_opts; +}; -int saveenv(void) +static int erase_and_write_env(const struct env_location *location, + u_char *env_new) { - env_t env_new; - ssize_t len; - char *res; - int ret = 0; - nand_erase_options_t nand_erase_options; + int ret = 0; - memset(&nand_erase_options, 0, sizeof(nand_erase_options)); - nand_erase_options.length = CONFIG_ENV_RANGE; - - if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE) - return 1; - - res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); - if (len < 0) { - error("Cannot export environment: errno = %d\n", errno); - return 1; - } - env_new.crc = crc32(0, env_new.data, ENV_SIZE); - env_new.flags = ++env_flags; /* increase the serial */ - - if (gd->env_valid == 1) { - puts("Erasing redundant NAND...\n"); - nand_erase_options.offset = CONFIG_ENV_OFFSET_REDUND; - if (nand_erase_opts(&nand_info[0], &nand_erase_options)) - return 1; - - puts("Writing to redundant NAND... "); - ret = writeenv(CONFIG_ENV_OFFSET_REDUND, (u_char *)&env_new); - } else { - puts("Erasing NAND...\n"); - nand_erase_options.offset = CONFIG_ENV_OFFSET; - if (nand_erase_opts(&nand_info[0], &nand_erase_options)) - return 1; - - puts("Writing to NAND... "); - ret = writeenv(CONFIG_ENV_OFFSET, (u_char *)&env_new); - } - if (ret) { - puts("FAILED!\n"); + printf("Erasing %s...\n", location->name); + if (nand_erase_opts(&nand_info[0], &location->erase_opts)) return 1; - } - - puts("done\n"); - gd->env_valid = gd->env_valid == 2 ? 1 : 2; + printf("Writing to %s... ", location->name); + ret = writeenv(location->erase_opts.offset, env_new); + puts(ret ? "FAILED!\n" : "OK\n"); return ret; } -#else /* ! CONFIG_ENV_OFFSET_REDUND */ + +#ifdef CONFIG_ENV_OFFSET_REDUND +static unsigned char env_flags; +#endif + int saveenv(void) { int ret = 0; ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); ssize_t len; char *res; - nand_erase_options_t nand_erase_options; + int env_idx = 0; + static const struct env_location location[] = { + { + .name = "NAND", + .erase_opts = { + .length = CONFIG_ENV_RANGE, + .offset = CONFIG_ENV_OFFSET, + }, + }, +#ifdef CONFIG_ENV_OFFSET_REDUND + { + .name = "redundant NAND", + .erase_opts = { + .length = CONFIG_ENV_RANGE, + .offset = CONFIG_ENV_OFFSET_REDUND, + }, + }, +#endif + }; - memset(&nand_erase_options, 0, sizeof(nand_erase_options)); - nand_erase_options.length = CONFIG_ENV_RANGE; - nand_erase_options.offset = CONFIG_ENV_OFFSET; if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE) return 1; @@ -228,22 +213,29 @@ int saveenv(void) error("Cannot export environment: errno = %d\n", errno); return 1; } - env_new->crc = crc32(0, env_new->data, ENV_SIZE); - - puts("Erasing Nand...\n"); - if (nand_erase_opts(&nand_info[0], &nand_erase_options)) - return 1; + env_new->crc = crc32(0, env_new->data, ENV_SIZE); +#ifdef CONFIG_ENV_OFFSET_REDUND + env_new->flags = ++env_flags; /* increase the serial */ + env_idx = (gd->env_valid == 1); +#endif - puts("Writing to Nand... "); - if (writeenv(CONFIG_ENV_OFFSET, (u_char *)env_new)) { - puts("FAILED!\n"); - return 1; + ret = erase_and_write_env(&location[env_idx], (u_char *)env_new); +#ifdef CONFIG_ENV_OFFSET_REDUND + if (!ret) { + /* preset other copy for next write */ + gd->env_valid = gd->env_valid == 2 ? 1 : 2; + return ret; } - puts("done\n"); + env_idx = (env_idx + 1) & 1; + ret = erase_and_write_env(&location[env_idx], (u_char *)env_new); + if (!ret) + printf("Warning: primary env write failed," + " redundancy is lost!\n"); +#endif + return ret; } -#endif /* CONFIG_ENV_OFFSET_REDUND */ #endif /* CMD_SAVEENV */ int readenv(size_t offset, u_char *buf) diff --git a/common/env_sf.c b/common/env_sf.c index e3e1897ccb..9f806fb090 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -7,7 +7,7 @@ * * (C) Copyright 2008 Atmel Corporation * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <environment.h> diff --git a/common/image-fit.c b/common/image-fit.c index 683c1a511d..199b4ed16a 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -343,6 +343,17 @@ void fit_image_print(const void *fit, int image_noffset, const char *p) else printf("%s\n", desc); + if (IMAGE_ENABLE_TIMESTAMP) { + time_t timestamp; + + ret = fit_get_timestamp(fit, 0, ×tamp); + printf("%s Created: ", p); + if (ret) + printf("unavailable\n"); + else + genimg_print_time(timestamp); + } + fit_image_get_type(fit, image_noffset, &type); printf("%s Type: %s\n", p, genimg_get_type_name(type)); diff --git a/common/image.c b/common/image.c index 56a5a626e6..2c88091e6d 100644 --- a/common/image.c +++ b/common/image.c @@ -135,6 +135,7 @@ static const table_entry_t uimage_type[] = { { IH_TYPE_SCRIPT, "script", "Script", }, { IH_TYPE_STANDALONE, "standalone", "Standalone Program", }, { IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",}, + { IH_TYPE_MXSIMAGE, "mxsimage", "Freescale MXS Boot Image",}, { -1, "", "", }, }; diff --git a/common/lcd.c b/common/lcd.c index 8d5c63c29e..990650c7ef 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -51,7 +51,6 @@ /* ** FONT DATA */ /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> /************************************************************************/ /* ** LOGO DATA */ diff --git a/common/spl/spl.c b/common/spl/spl.c index d6b0e01075..da31457d5f 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -85,8 +85,9 @@ void spl_parse_image_header(const struct image_header *header) } spl_image.os = image_get_os(header); spl_image.name = image_get_name(header); - debug("spl: payload image: %s load addr: 0x%x size: %d\n", - spl_image.name, spl_image.load_addr, spl_image.size); + debug("spl: payload image: %.*s load addr: 0x%x size: %d\n", + sizeof(spl_image.name), spl_image.name, + spl_image.load_addr, spl_image.size); } else { /* Signature not found - assume u-boot.bin */ debug("mkimage signature not found - ih_magic = %x\n", diff --git a/common/stdio.c b/common/stdio.c index 721e9a1444..844f98c184 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -196,9 +196,6 @@ int stdio_init (void) /* Initialize the list */ INIT_LIST_HEAD(&(devs.list)); -#ifdef CONFIG_ARM_DCC - drv_arm_dcc_init (); -#endif #ifdef CONFIG_SYS_I2C i2c_init_all(); #else diff --git a/common/usb.c b/common/usb.c index f740e5ec21..c97f522bed 100644 --- a/common/usb.c +++ b/common/usb.c @@ -323,6 +323,7 @@ static int usb_set_maxpacket(struct usb_device *dev) /******************************************************************************* * Parse the config, located in buffer, and fills the dev->config structure. * Note that all little/big endian swapping are done automatically. + * (wTotalLength has already been swapped and sanitized when it was read.) */ static int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno) @@ -343,24 +344,43 @@ static int usb_parse_config(struct usb_device *dev, head->bDescriptorType); return -1; } - memcpy(&dev->config, buffer, buffer[0]); - le16_to_cpus(&(dev->config.desc.wTotalLength)); + if (head->bLength != USB_DT_CONFIG_SIZE) { + printf("ERROR: Invalid USB CFG length (%d)\n", head->bLength); + return -1; + } + memcpy(&dev->config, head, USB_DT_CONFIG_SIZE); dev->config.no_of_if = 0; index = dev->config.desc.bLength; /* Ok the first entry must be a configuration entry, * now process the others */ head = (struct usb_descriptor_header *) &buffer[index]; - while (index + 1 < dev->config.desc.wTotalLength) { + while (index + 1 < dev->config.desc.wTotalLength && head->bLength) { switch (head->bDescriptorType) { case USB_DT_INTERFACE: + if (head->bLength != USB_DT_INTERFACE_SIZE) { + printf("ERROR: Invalid USB IF length (%d)\n", + head->bLength); + break; + } + if (index + USB_DT_INTERFACE_SIZE > + dev->config.desc.wTotalLength) { + puts("USB IF descriptor overflowed buffer!\n"); + break; + } if (((struct usb_interface_descriptor *) \ - &buffer[index])->bInterfaceNumber != curr_if_num) { + head)->bInterfaceNumber != curr_if_num) { /* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if (ifno >= USB_MAXINTERFACES) { + puts("Too many USB interfaces!\n"); + /* try to go on with what we have */ + return 1; + } if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; - memcpy(if_desc, &buffer[index], buffer[index]); + memcpy(if_desc, head, + USB_DT_INTERFACE_SIZE); if_desc->no_of_ep = 0; if_desc->num_altsetting = 1; curr_if_num = @@ -374,12 +394,31 @@ static int usb_parse_config(struct usb_device *dev, } break; case USB_DT_ENDPOINT: + if (head->bLength != USB_DT_ENDPOINT_SIZE) { + printf("ERROR: Invalid USB EP length (%d)\n", + head->bLength); + break; + } + if (index + USB_DT_ENDPOINT_SIZE > + dev->config.desc.wTotalLength) { + puts("USB EP descriptor overflowed buffer!\n"); + break; + } + if (ifno < 0) { + puts("Endpoint descriptor out of order!\n"); + break; + } epno = dev->config.if_desc[ifno].no_of_ep; if_desc = &dev->config.if_desc[ifno]; + if (epno > USB_MAXENDPOINTS) { + printf("Interface %d has too many endpoints!\n", + if_desc->desc.bInterfaceNumber); + return 1; + } /* found an endpoint */ if_desc->no_of_ep++; - memcpy(&if_desc->ep_desc[epno], - &buffer[index], buffer[index]); + memcpy(&if_desc->ep_desc[epno], head, + USB_DT_ENDPOINT_SIZE); ep_wMaxPacketSize = get_unaligned(&dev->config.\ if_desc[ifno].\ ep_desc[epno].\ @@ -392,9 +431,23 @@ static int usb_parse_config(struct usb_device *dev, debug("if %d, ep %d\n", ifno, epno); break; case USB_DT_SS_ENDPOINT_COMP: + if (head->bLength != USB_DT_SS_EP_COMP_SIZE) { + printf("ERROR: Invalid USB EPC length (%d)\n", + head->bLength); + break; + } + if (index + USB_DT_SS_EP_COMP_SIZE > + dev->config.desc.wTotalLength) { + puts("USB EPC descriptor overflowed buffer!\n"); + break; + } + if (ifno < 0 || epno < 0) { + puts("EPC descriptor out of order!\n"); + break; + } if_desc = &dev->config.if_desc[ifno]; - memcpy(&if_desc->ss_ep_comp_desc[epno], - &buffer[index], buffer[index]); + memcpy(&if_desc->ss_ep_comp_desc[epno], head, + USB_DT_SS_EP_COMP_SIZE); break; default: if (head->bLength == 0) @@ -473,7 +526,7 @@ int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer, int cfgno) { int result; - unsigned int tmp; + unsigned int length; struct usb_config_descriptor *config; config = (struct usb_config_descriptor *)&buffer[0]; @@ -487,16 +540,18 @@ int usb_get_configuration_no(struct usb_device *dev, "(expected %i, got %i)\n", 9, result); return -1; } - tmp = le16_to_cpu(config->wTotalLength); + length = le16_to_cpu(config->wTotalLength); - if (tmp > USB_BUFSIZ) { - printf("usb_get_configuration_no: failed to get " \ - "descriptor - too long: %d\n", tmp); + if (length > USB_BUFSIZ) { + printf("%s: failed to get descriptor - too long: %d\n", + __func__, length); return -1; } - result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp); - debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, tmp); + result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, length); + debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, length); + config->wTotalLength = length; /* validated, with CPU byte order */ + return result; } diff --git a/common/usb_hub.c b/common/usb_hub.c index 754d436ad4..ffac0e743c 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -44,6 +44,10 @@ static struct usb_hub_device hub_dev[USB_MAX_HUB]; static int usb_hub_index; +__weak void usb_hub_reset_devices(int port) +{ + return; +} static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size) { @@ -110,7 +114,7 @@ static void usb_hub_power_on(struct usb_hub_device *hub) ret = usb_get_port_status(dev, i + 1, portsts); if (ret < 0) { debug("port %d: get_port_status failed\n", i + 1); - return; + continue; } /* @@ -125,7 +129,7 @@ static void usb_hub_power_on(struct usb_hub_device *hub) portstatus = le16_to_cpu(portsts->wPortStatus); if (portstatus & (USB_PORT_STAT_POWER << 1)) { debug("port %d: Port power change failed\n", i + 1); - return; + continue; } } @@ -302,7 +306,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) static int usb_hub_configure(struct usb_device *dev) { - int i; + int i, length; ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ); unsigned char *bitmap; short hubCharacteristics; @@ -323,20 +327,14 @@ static int usb_hub_configure(struct usb_device *dev) } descriptor = (struct usb_hub_descriptor *)buffer; - /* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */ - i = descriptor->bLength; - if (i > USB_BUFSIZ) { - debug("usb_hub_configure: failed to get hub " \ - "descriptor - too long: %d\n", descriptor->bLength); - return -1; - } + length = min(descriptor->bLength, sizeof(struct usb_hub_descriptor)); - if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) { + if (usb_get_hub_descriptor(dev, buffer, length) < 0) { debug("usb_hub_configure: failed to get hub " \ "descriptor 2nd giving up %lX\n", dev->status); return -1; } - memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength); + memcpy((unsigned char *)&hub->desc, buffer, length); /* adjust 16bit values */ put_unaligned(le16_to_cpu(get_unaligned( &descriptor->wHubCharacteristics)), @@ -426,6 +424,14 @@ static int usb_hub_configure(struct usb_device *dev) "" : "no "); usb_hub_power_on(hub); + /* + * Reset any devices that may be in a bad state when applying + * the power. This is a __weak function. Resetting of the devices + * should occur in the board file of the device. + */ + for (i = 0; i < dev->maxchild; i++) + usb_hub_reset_devices(i + 1); + for (i = 0; i < dev->maxchild; i++) { ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); unsigned short portstatus, portchange; diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 2ca3767ecf..1ad67caf13 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -104,6 +104,11 @@ struct usb_kbd_pdata { uint8_t flags; }; +extern int __maybe_unused net_busy_flag; + +/* The period of time between two calls of usb_kbd_testc(). */ +static unsigned long __maybe_unused kbd_testc_tms; + /* Generic keyboard event polling. */ void usb_kbd_generic_poll(void) { @@ -349,6 +354,16 @@ static int usb_kbd_testc(void) struct usb_device *usb_kbd_dev; struct usb_kbd_pdata *data; +#ifdef CONFIG_CMD_NET + /* + * If net_busy_flag is 1, NET transfer is running, + * then we check key-pressed every second (first check may be + * less than 1 second) to improve TFTP booting performance. + */ + if (net_busy_flag && (get_timer(kbd_testc_tms) < CONFIG_SYS_HZ)) + return 0; + kbd_testc_tms = get_timer(0); +#endif dev = stdio_get_by_name(DEVNAME); usb_kbd_dev = (struct usb_device *)dev->priv; data = usb_kbd_dev->privptr; @@ -13,6 +13,12 @@ SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ export SHELL +ifeq ($(CONFIG_TPL_BUILD),y) +SPL_BIN := u-boot-tpl +else +SPL_BIN := u-boot-spl +endif + ifeq ($(CURDIR),$(SRCTREE)) dir := else @@ -22,7 +28,11 @@ endif ifneq ($(OBJTREE),$(SRCTREE)) # Create object files for SPL in a separate directory ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_TPL_BUILD),y) +obj := $(if $(dir),$(TPLTREE)/$(dir)/,$(TPLTREE)/) +else obj := $(if $(dir),$(SPLTREE)/$(dir)/,$(SPLTREE)/) +endif else obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/) endif @@ -32,8 +42,12 @@ $(shell mkdir -p $(obj)) else # Create object files for SPL in a separate directory ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_TPL_BUILD),y) +obj := $(if $(dir),$(TPLTREE)/$(dir)/,$(TPLTREE)/) +else obj := $(if $(dir),$(SPLTREE)/$(dir)/,$(SPLTREE)/) +endif $(shell mkdir -p $(obj)) else obj := @@ -119,6 +133,7 @@ endif # Usage gcc-ver := $(call cc-version) cc-version = $(shell $(SHELL) $(SRCTREE)/tools/gcc-version.sh $(CC)) binutils-version = $(shell $(SHELL) $(SRCTREE)/tools/binutils-version.sh $(AS)) +dtc-version = $(shell $(SHELL) $(SRCTREE)/tools/dtc-version.sh $(DTC)) # # Include the make variables (CC, etc...) @@ -144,7 +159,18 @@ CHECK = sparse ######################################################################### # Load generated board configuration +ifeq ($(CONFIG_TPL_BUILD),y) +# Include TPL autoconf +sinclude $(OBJTREE)/include/tpl-autoconf.mk +else +ifeq ($(CONFIG_SPL_BUILD),y) +# Include SPL autoconf +sinclude $(OBJTREE)/include/spl-autoconf.mk +else +# Include normal autoconf sinclude $(OBJTREE)/include/autoconf.mk +endif +endif sinclude $(OBJTREE)/include/config.mk # Some architecture config.mk files need to know what CPUDIR is set to, @@ -194,6 +220,15 @@ LDFLAGS_FINAL += --gc-sections endif # TODO(sjg@chromium.org): Is this correct on Mac OS? + +# MXSImage needs LibSSL +ifneq ($(CONFIG_MX23)$(CONFIG_MX28),) +HOSTLIBS += -lssl -lcrypto +# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register +# the mxsimage support within tools/mxsimage.c . +HOSTCFLAGS += -DCONFIG_MXS +endif + ifdef CONFIG_FIT_SIGNATURE HOSTLIBS += -lssl -lcrypto @@ -214,12 +249,19 @@ ifneq ($(CONFIG_SPL_PAD_TO),) CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO) endif +ifneq ($(CONFIG_TPL_PAD_TO),) +CPPFLAGS += -DCONFIG_TPL_PAD_TO=$(CONFIG_TPL_PAD_TO) +endif + ifneq ($(CONFIG_UBOOT_PAD_TO),) CPPFLAGS += -DCONFIG_UBOOT_PAD_TO=$(CONFIG_UBOOT_PAD_TO) endif ifeq ($(CONFIG_SPL_BUILD),y) CPPFLAGS += -DCONFIG_SPL_BUILD +ifeq ($(CONFIG_TPL_BUILD),y) +CPPFLAGS += -DCONFIG_TPL_BUILD +endif endif # Does this architecture support generic board init? @@ -291,9 +333,9 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),) LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) endif -LDFLAGS_u-boot-spl += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL) +LDFLAGS_$(SPL_BIN) += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL) ifneq ($(CONFIG_SPL_TEXT_BASE),) -LDFLAGS_u-boot-spl += -Ttext $(CONFIG_SPL_TEXT_BASE) +LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) endif # Linus' kernel sanity checking tool diff --git a/doc/README.SPL b/doc/README.SPL index ac9a2137c8..312a6a612e 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -67,7 +67,7 @@ CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o) CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o) CONFIG_SPL_SPI_LOAD (drivers/mtd/spi/spi_spl_load.o) CONFIG_SPL_RAM_DEVICE (common/spl/spl.c) - +CONFIG_SPL_WATCHDOG_SUPPORT (drivers/watchdog/libwatchdog.o) Normally CPU is assumed to be the same between the SPL and normal u-boot build. However it is possible to specify a different CPU for diff --git a/doc/README.TPL b/doc/README.TPL new file mode 100644 index 0000000000..1df03b958e --- /dev/null +++ b/doc/README.TPL @@ -0,0 +1,45 @@ +Generic TPL framework +===================== + +Overview +-------- + +TPL---Third Program Loader. + +Due to the SPL on some boards(powerpc mpc85xx) has a size limit and cannot +be compatible with all the external device(e.g. DDR). So add a tertiary +program loader (TPL) to enable a loader stub loaded by the code from the +SPL. It loads the final uboot image into DDR, then jump to it to begin +execution. Now, only the powerpc mpc85xx has this requirement and will +implemente it. + +Keep consistent with SPL, with this framework almost all source files for a +board can be reused. No code duplication or symlinking is necessary anymore. + +How it works +------------ + +There has been a directory TOPDIR/spl which contains only a Makefile. The +Makefile is shared by SPL and TPL. + +The object files are built separately for SPL/TPL and placed in the +directory spl/tpl. The final binaries which are generated are +u-boot-{spl|tpl}, u-boot-{spl|tpl}.bin and u-boot-{spl|tpl}.map. + +During the TPL build a variable named CONFIG_TPL_BUILD is exported in the +make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. + +The SPL options are shared by SPL and TPL, the board config file should +determine which SPL options to choose based on whether CONFIG_TPL_BUILD +is set. Source files can be compiled for TPL with options choosed in the +board config file. + +For example: + +spl/Makefile: +LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o + +CONFIG_SPL_LIBCOMMON_SUPPORT is defined in board config file: +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#endif diff --git a/doc/README.atmel_pmecc b/doc/README.atmel_pmecc index b483744ea5..41f3bd7860 100644 --- a/doc/README.atmel_pmecc +++ b/doc/README.atmel_pmecc @@ -19,17 +19,6 @@ To use PMECC in this driver, the user needs to set: It can be 2, 4, 8, 12 or 24. 2. The PMECC sector size: CONFIG_PMECC_SECTOR_SIZE. It only can be 512 or 1024. - 3. The PMECC index lookup table's offsets in ROM code: CONFIG_PMECC_INDEX_TABLE_OFFSET. - In the chip datasheet section "Boot Stragegies", you can find - two Galois Field Table in the ROM code. One table is for 512-bytes - sector. Another is for 1024-byte sector. Each Galois Field includes - two sub-table: indext table & alpha table. - In the beginning of each Galois Field Table is the index table, - Alpha table is in the following. - So the index table's offset is same as the Galois Field Table. - - Please set CONFIG_PMECC_INDEX_TABLE_OFFSET correctly according the - Galois Field Table's offset base on the sector size you used. Take AT91SAM9X5EK as an example, the board definition file likes: @@ -38,7 +27,4 @@ Take AT91SAM9X5EK as an example, the board definition file likes: #define CONFIG_ATMEL_NAND_HW_PMECC 1 #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 -NOTE: If you use 1024 as the sector size, then need set 0x10000 as the - CONFIG_PMECC_INDEX_TABLE_OFFSET diff --git a/doc/README.fdt-control b/doc/README.fdt-control index 4b290609fc..86bae6816d 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -119,8 +119,7 @@ file into board/<vendor>/dts/<name>.dts This should include your CPU or SOC's device tree file, placed in -arch/<arch>/dts, and then make any adjustments required. The name of this -is CONFIG_ARCH_DEVICE_TREE.dts. +arch/<arch>/dts, and then make any adjustments required. If CONFIG_OF_EMBED is defined, then it will be picked up and built into the U-Boot image (including u-boot.bin). diff --git a/doc/README.imximage b/doc/README.imximage index 802eb90f1d..dcda2005af 100644 --- a/doc/README.imximage +++ b/doc/README.imximage @@ -15,9 +15,6 @@ Booting from NOR flash does not require to use this image type. For more details refer Chapter 2 - System Boot and section 2.14 (flash header description) of the processor's manual. -This implementation does not use at the moment the secure boot feature -of the processor. The image is generated disabling all security fields. - Command syntax: -------------- ./tools/mkimage -l <mx u-boot_file> @@ -86,6 +83,33 @@ Configuration command line syntax: Example: BOOT_FROM spi + CSF value + + Total size of CSF (Command Sequence File) + used for Secure Boot/ High Assurance Boot + (HAB). + + Using this command will populate the IVT + (Initial Vector Table) CSF pointer and adjust + the length fields only. The CSF itself needs + to be generated with Freescale tools and + 'manually' appended to the u-boot.imx file. + + The CSF is then simply concatenated + to the u-boot image, making a signed bootloader, + that the processor can verify + if the fuses for the keys are burned. + + Further infos how to configure the SOC to verify + the bootloader can be found in the "High + Assurance Boot Version Application Programming + Interface Reference Manual" as part of the + Freescale Code Signing Tool, available on the + manufacturer's website. + + Example: + CSF 0x2000 + DATA type address value type: word=4, halfword=2, byte=1 diff --git a/doc/README.mpc85xx-sd-spi-boot b/doc/README.mpc85xx-sd-spi-boot new file mode 100644 index 0000000000..d5043ccb66 --- /dev/null +++ b/doc/README.mpc85xx-sd-spi-boot @@ -0,0 +1,81 @@ +---------------------------------------- +Booting from On-Chip ROM (eSDHC or eSPI) +---------------------------------------- + +boot_format is a tool to write SD bootable images to a filesystem and build +SD/SPI images to a binary file for writing later. + +When booting from an SD card/MMC, boot_format puts the configuration file and +the RAM-based U-Boot image on the card. +When booting from an EEPROM, boot_format generates a binary image that is used +to boot from this EEPROM. + +Where to get boot_format: +======================== + +you can browse it online at: +http://git.freescale.com/git/cgit.cgi/ppc/sdk/boot-format.git/ + +Building +======== + +Run the following to build this project + + $ make + +Execution +========= + +boot_format runs under a regular Linux machine and requires a super user mode +to run. Execute boot_format as follows. + +For building SD images by writing directly to a file system on SD media: + + $ boot_format $config u-boot.bin -sd $device + +Where $config is the included config.dat file for your platform and $device +is the target block device for the SD media on your computer. + +For build binary images directly a local file: + + $ boot_format $config u-boot.bin -spi $file + +Where $file is the target file. Also keep in mind the u-boot.bin file needs +to be the u-boot built for your particular platform and target media. + +Example: To generate a u-boot.bin for a P1022DS booting from SD, run the +following in the u-boot repository: + + $ make P1022DS_SDCARD + +Configuration Files +=================== + +Below are the configuration files to be used with a particular platform. Keep +in mind that some of these config files are tied to the platforms DDR speed. +Please see the SoC reference manual for more documentation. + +P1022DS config_sram_p1022ds.dat +P2020DS config_sram_p2020ds.dat +P2010DS config_sram_p2020ds.dat +P1020RDB config_ddr2_1g_p1020rdb_533M.dat +P1020RDB config_ddr2_1g_p1020rdb_667M.dat +P2020RDB config_ddr2_1g_p2020rdb_800M.dat +P2020RDB config_ddr2_1g_p2020rdb_667M.dat +P2020RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat +P2010RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat +P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1010RDB config_ddr3_1gb_p1010rdb_800M.dat +P1014RDB config_ddr3_1gb_p1014rdb_800M.dat +P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1012RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1022DS config_ddr3_2gb_p1022ds.dat +P1013DS config_ddr3_2gb_p1022ds.dat +P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1013RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1025RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1016RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1020UTM config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1020MBG config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +MPC8536DS config_ddr2_512m_mpc8536ds_667M.dat diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab new file mode 100644 index 0000000000..97f8b7d743 --- /dev/null +++ b/doc/README.mxc_hab @@ -0,0 +1,48 @@ +High Assurance Boot (HAB) for i.MX6 CPUs + +To authenticate U-Boot only by the CPU there is no code required in +U-Boot itself. However, the U-Boot image to be programmed into the +boot media needs to be properly constructed, i.e. it must contain a +proper Command Sequence File (CSF). + +The Initial Vector Table contains a pointer to the CSF. Please see +doc/README.imximage for how to prepare u-boot.imx. + +The CSF itself is being generated by Freescale HAB tools. + +mkimage will output additional information about "HAB Blocks" +which can be used in the Freescale tooling to authenticate U-Boot +(entries in the CSF file). + +Image Type: Freescale IMX Boot Image +Image Ver: 2 (i.MX53/6 compatible) +Data Size: 327680 Bytes = 320.00 kB = 0.31 MB +Load Address: 177ff420 +Entry Point: 17800000 +HAB Blocks: 177ff400 00000000 0004dc00 + ^^^^^^^^ ^^^^^^^^ ^^^^^^^^ + | | | + | | -------- (1) + | | + | ------------------- (2) + | + --------------------------- (3) + +(1) Size of area in file u-boot.imx to sign + This area should include the IVT, the Boot Data the DCD + and U-Boot itself. +(2) Start of area in u-boot.imx to sign +(3) Start of area in RAM to authenticate + +CONFIG_SECURE_BOOT currently enables only an additional command +'hab_status' in U-Boot to retrieve the HAB status and events. This +can be useful while developing and testing HAB. + +Commands to generate a signed U-Boot using Freescale HAB tools: +cst --o U-Boot_CSF.bin < U-Boot.CSF +objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \ + U-Boot_CSF.bin U-Boot_CSF_pad.bin +cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx + +NOTE: U-Boot_CSF.bin needs to be padded to the value specified in +the imximage.cfg file. diff --git a/doc/README.mxsimage b/doc/README.mxsimage new file mode 100644 index 0000000000..88a2caf3e6 --- /dev/null +++ b/doc/README.mxsimage @@ -0,0 +1,165 @@ +Freescale i.MX233/i.MX28 SB image generator via mkimage +======================================================= + +This tool allows user to produce SB BootStream encrypted with a zero key. +Such a BootStream is then bootable on i.MX23/i.MX28. + +Usage -- producing image: +========================= +The mxsimage tool is targeted to be a simple replacement for the elftosb2 . +To generate an image, write an image configuration file and run: + + mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \ + <output bootstream file> + +The output bootstream file is usually using the .sb file extension. Note +that the example configuration files for producing bootable BootStream with +the U-Boot bootloader can be found under arch/arm/boot/cpu/arm926ejs/mxs/ +directory. See the following files: + + mxsimage.mx23.cfg -- This is an example configuration for i.MX23 + mxsimage.mx28.cfg -- This is an example configuration for i.MX28 + +Each configuration file uses very simple instruction semantics and a few +additional rules have to be followed so that a useful image can be produced. +These semantics and rules will be outlined now. + +- Each line of the configuration file contains exactly one instruction. +- Every numeric value must be encoded in hexadecimal and in format 0xabcdef12 . +- The configuration file is a concatenation of blocks called "sections" and + optionally "DCD blocks" (see below). + - Each "section" is started by the "SECTION" instruction. + - The "SECTION" instruction has the following semantics: + + SECTION u32_section_number [BOOTABLE] + - u32_section_number :: User-selected ID of the section + - BOOTABLE :: Sets the section as bootable + + - A bootable section is one from which the BootROM starts executing + subsequent instructions or code. Exactly one section must be selected + as bootable, usually the one containing the instructions and data to + load the bootloader. + + - A "SECTION" must be immediatelly followed by a "TAG" instruction. + - The "TAG" instruction has the following semantics: + + TAG [LAST] + - LAST :: Flag denoting the last section in the file + + - After a "TAG" unstruction, any of the following instructions may follow + in any order and any quantity: + + NOOP + - This instruction does nothing + + LOAD u32_address string_filename + - Instructs the BootROM to load file pointed by "string_filename" onto + address "u32_address". + + LOAD IVT u32_address u32_IVT_entry_point + - Crafts and loads IVT onto address "u32_address" with the entry point + of u32_IVT_entry_point. + - i.MX28-specific instruction! + + LOAD DCD u32_address u32_DCD_block_ID + - Loads the DCD block with ID "u32_DCD_block_ID" onto address + "u32_address" and executes the contents of this DCD block + - i.MX28-specific instruction! + + FILL u32_address u32_pattern u32_length + - Starts to write memory from addres "u32_address" with a pattern + specified by "u32_pattern". Writes exactly "u32_length" bytes of the + pattern. + + JUMP [HAB] u32_address [u32_r0_arg] + - Jumps onto memory address specified by "u32_address" by setting this + address in PT. The BootROM will pass the "u32_r0_arg" value in ARM + register "r0" to the executed code if this option is specified. + Otherwise, ARM register "r0" will default to value 0x00000000. The + optional "HAB" flag is i.MX28-specific flag turning on the HAB boot. + + CALL [HAB] u32_address [u32_r0_arg] + - See JUMP instruction above, as the operation is exactly the same with + one difference. The CALL instruction does allow returning into the + BootROM from the executed code. U-Boot makes use of this in it's SPL + code. + + MODE string_mode + - Restart the CPU and start booting from device specified by the + "string_mode" argument. The "string_mode" differs for each CPU + and can be: + i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH + JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1 + i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH + JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1 + + - An optional "DCD" blocks can be added at the begining of the configuration + file. Note that the DCD is only supported on i.MX28. + - The DCD blocks must be inserted before the first "section" in the + configuration file. + - The DCD block has the following semantics: + + DCD u32_DCD_block_ID + - u32_DCD_block_ID :: The ID number of the DCD block, must match + the ID number used by "LOAD DCD" instruction. + + - The DCD block must be followed by one of the following instructions. All + of the instructions operate either on 1, 2 or 4 bytes. This is selected by + the 'n' suffix of the instruction: + + WRITE.n u32_address u32_value + - Write the "u32_value" to the "u32_address" address. + + ORR.n u32_address u32_value + - Read the "u32_address", perform a bitwise-OR with the "u32_value" and + write the result back to "u32_address". + + ANDC.n u32_address u32_value + - Read the "u32_address", perform a bitwise-AND with the complement of + "u32_value" and write the result back to "u32_address". + + EQZ.n u32_address u32_count + - Read the "u32_address" at most "u32_count" times and test if the value + read is zero. If it is, break the loop earlier. + + NEZ.n u32_address u32_count + - Read the "u32_address" at most "u32_count" times and test if the value + read is non-zero. If it is, break the loop earlier. + + EQ.n u32_address u32_mask + - Read the "u32_address" in a loop and test if the result masked with + "u32_mask" equals the "u32_mask". If the values are equal, break the + reading loop. + + NEQ.n u32_address u32_mask + - Read the "u32_address" in a loop and test if the result masked with + "u32_mask" does not equal the "u32_mask". If the values are not equal, + break the reading loop. + + NOOP + - This instruction does nothing. + +- If the verbose output from the BootROM is enabled, the BootROM will produce a + letter on the Debug UART for each instruction it started processing. Here is a + mapping between the above instructions and the BootROM verbose output: + + H -- SB Image header loaded + T -- TAG instruction + N -- NOOP instruction + L -- LOAD instruction + F -- FILL instruction + J -- JUMP instruction + C -- CALL instruction + M -- MODE instruction + +Usage -- verifying image: +========================= + +The mxsimage can also verify and dump contents of an image. Use the following +syntax to verify and dump contents of an image: + + mkimage -l <input bootstream file> + +This will output all the information from the SB image header and all the +instructions contained in the SB image. It will also check if the various +checksums in the SB image are correct. diff --git a/doc/README.scrapyard b/doc/README.scrapyard index a0f1fa30f8..87b1dfecd1 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,9 +11,10 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -Alaska8220 powerpc mpc8220 - - -Yukon8220 powerpc mpc8220 - - -sorcery powerpc mpc8220 - - +CANBT powerpc 405CR - - Matthias Fuchs <matthias.fuchs@esd.eu> +Alaska8220 powerpc mpc8220 d6ed322 2013-05-11 +Yukon8220 powerpc mpc8220 d6ed322 2013-05-11 +sorcery powerpc mpc8220 d6ed322 2013-05-11 smdk6400 arm arm1176 52587f1 2013-04-12 Zhong Hongbo <bocui107@gmail.com> ns9750dev arm arm926ejs 4cfc611 2013-02-28 Markus Pietrek <mpietrek@fsforth.de> AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index b8870ecf73..d73d510391 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -16,9 +16,20 @@ #include <linux/list.h> #include <linux/compiler.h> +static bool dfu_reset_request; static LIST_HEAD(dfu_list); static int dfu_alt_num; +bool dfu_reset(void) +{ + return dfu_reset_request; +} + +void dfu_trigger_reset() +{ + dfu_reset_request = true; +} + static int dfu_find_alt_num(const char *s) { int i = 0; diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index 2a01cc11b8..0ec12cff26 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -136,11 +136,43 @@ static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf, return ret; } +static int dfu_flush_medium_nand(struct dfu_entity *dfu) +{ + int ret = 0; + + /* in case of ubi partition, erase rest of the partition */ + if (dfu->data.nand.ubi) { + nand_info_t *nand; + nand_erase_options_t opts; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || + !nand_info[nand_curr_device].name) { + printf("%s: invalid nand device\n", __func__); + return -1; + } + + nand = &nand_info[nand_curr_device]; + + memset(&opts, 0, sizeof(opts)); + opts.offset = dfu->data.nand.start + dfu->offset + + dfu->bad_skip; + opts.length = dfu->data.nand.start + + dfu->data.nand.size - opts.offset; + ret = nand_erase_opts(nand, &opts); + if (ret != 0) + printf("Failure erase: %d\n", ret); + } + + return ret; +} + int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) { char *st; int ret, dev, part; + dfu->data.nand.ubi = 0; dfu->dev_type = DFU_DEV_NAND; st = strsep(&s, " "); if (!strcmp(st, "raw")) { @@ -148,7 +180,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->data.nand.start = simple_strtoul(s, &s, 16); s++; dfu->data.nand.size = simple_strtoul(s, &s, 16); - } else if (!strcmp(st, "part")) { + } else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) { char mtd_id[32]; struct mtd_device *mtd_dev; u8 part_num; @@ -173,7 +205,8 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->data.nand.start = pi->offset; dfu->data.nand.size = pi->size; - + if (!strcmp(st, "partubi")) + dfu->data.nand.ubi = 1; } else { printf("%s: Memory layout (%s) not supported!\n", __func__, st); return -1; @@ -181,6 +214,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->read_medium = dfu_read_medium_nand; dfu->write_medium = dfu_write_medium_nand; + dfu->flush_medium = dfu_flush_medium_nand; /* initial state */ dfu->inited = 0; diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index 96d4c9bb19..22defcd7d9 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -545,6 +545,28 @@ int mxs_dma_go(int chan) } /* + * Execute a continuously running circular DMA descriptor. + * NOTE: This is not intended for general use, but rather + * for the LCD driver in Smart-LCD mode. It allows + * continuous triggering of the RUN bit there. + */ +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc) +{ + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; + + mxs_dma_flush_desc(pdesc); + + mxs_dma_enable_irq(chan, 1); + + writel(mxs_dma_cmd_address(pdesc), + &apbh_regs->ch[chan].hw_apbh_ch_nxtcmdar); + writel(1, &apbh_regs->ch[chan].hw_apbh_ch_sema); + writel(1 << (chan + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_ctrl0_clr); +} + +/* * Initialize the DMA hardware */ void mxs_dma_init(void) diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 8cc16fd2c2..14363c9a5b 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -23,6 +23,7 @@ #define DEVCFG_STATUS_DMA_CMD_Q_E 0x40000000 #define DEVCFG_STATUS_DMA_DONE_CNT_MASK 0x30000000 #define DEVCFG_STATUS_PCFG_INIT 0x00000010 +#define DEVCFG_MCTRL_PCAP_LPBK 0x00000010 #define DEVCFG_MCTRL_RFIFO_FLUSH 0x00000002 #define DEVCFG_MCTRL_WFIFO_FLUSH 0x00000001 @@ -31,7 +32,7 @@ #endif #ifndef CONFIG_SYS_FPGA_PROG_TIME -#define CONFIG_SYS_FPGA_PROG_TIME CONFIG_SYS_HZ /* 1 s */ +#define CONFIG_SYS_FPGA_PROG_TIME (CONFIG_SYS_HZ * 4) /* 4 s */ #endif int zynq_info(Xilinx_desc *desc) @@ -200,6 +201,9 @@ int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) swap = SWAP_DONE; } + /* Clear loopback bit */ + clrbits_le32(&devcfg_base->mctrl, DEVCFG_MCTRL_PCAP_LPBK); + if (!partialbit) { zynq_slcr_devcfg_disable(); diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c index 7a034eba12..051073cee3 100644 --- a/drivers/gpio/adi_gpio2.c +++ b/drivers/gpio/adi_gpio2.c @@ -352,8 +352,8 @@ void special_gpio_free(unsigned gpio) return; } - reserve(special_gpio, gpio); - reserve(peri, gpio); + unreserve(special_gpio, gpio); + unreserve(peri, gpio); set_label(gpio, "free"); } #endif diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 23229148d9..af0978675e 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -1,5 +1,5 @@ /* - * Memory Setup stuff - taken from blob memsetup.S + * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> * * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de) * @@ -8,16 +8,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* - * WARNING: - * - * As the code is right now, it expects all PIO ports A,B,C,... - * to be evenly spaced in the memory map: - * ATMEL_BASE_PIOA + port * sizeof at91pio_t - * This might not necessaryly be true in future Atmel SoCs. - * This code should be fixed to use a pointer array to the ports. - */ - #include <config.h> #include <common.h> #include <asm/io.h> @@ -25,19 +15,42 @@ #include <asm/arch/hardware.h> #include <asm/arch/at91_pio.h> +static struct at91_port *at91_pio_get_port(unsigned port) +{ + switch (port) { + case AT91_PIO_PORTA: + return (struct at91_port *)ATMEL_BASE_PIOA; + case AT91_PIO_PORTB: + return (struct at91_port *)ATMEL_BASE_PIOB; + case AT91_PIO_PORTC: + return (struct at91_port *)ATMEL_BASE_PIOC; +#if (ATMEL_PIO_PORTS > 3) + case AT91_PIO_PORTD: + return (struct at91_port *)ATMEL_BASE_PIOD; +#if (ATMEL_PIO_PORTS > 4) + case AT91_PIO_PORTE: + return (struct at91_port *)ATMEL_BASE_PIOE; +#endif +#endif + default: + return NULL; + } +} + int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (use_pullup) - writel(1 << pin, &pio->port[port].puer); + writel(1 << pin, &at91_port->puer); else - writel(1 << pin, &pio->port[port].pudr); - writel(mask, &pio->port[port].per); + writel(1 << pin, &at91_port->pudr); + writel(mask, &at91_port->per); } + return 0; } @@ -46,15 +59,16 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) */ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(mask, &pio->port[port].per); + writel(mask, &at91_port->per); } + return 0; } @@ -63,23 +77,24 @@ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); #if defined(CPU_HAS_PIO3) - writel(readl(&pio->port[port].abcdsr1) & ~mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) & ~mask, - &pio->port[port].abcdsr2); + writel(readl(&at91_port->abcdsr1) & ~mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) & ~mask, + &at91_port->abcdsr2); #else - writel(mask, &pio->port[port].asr); + writel(mask, &at91_port->asr); #endif - writel(mask, &pio->port[port].pdr); + writel(mask, &at91_port->pdr); } + return 0; } @@ -88,23 +103,24 @@ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); #if defined(CPU_HAS_PIO3) - writel(readl(&pio->port[port].abcdsr1) | mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) & ~mask, - &pio->port[port].abcdsr2); + writel(readl(&at91_port->abcdsr1) | mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) & ~mask, + &at91_port->abcdsr2); #else - writel(mask, &pio->port[port].bsr); + writel(mask, &at91_port->bsr); #endif - writel(mask, &pio->port[port].pdr); + writel(mask, &at91_port->pdr); } + return 0; } @@ -114,19 +130,20 @@ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(readl(&pio->port[port].abcdsr1) & ~mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) | mask, - &pio->port[port].abcdsr2); - writel(mask, &pio->port[port].pdr); + writel(readl(&at91_port->abcdsr1) & ~mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) | mask, + &at91_port->abcdsr2); + writel(mask, &at91_port->pdr); } + return 0; } @@ -135,19 +152,20 @@ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(readl(&pio->port[port].abcdsr1) | mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) | mask, - &pio->port[port].abcdsr2); - writel(mask, &pio->port[port].pdr); + writel(readl(&at91_port->abcdsr1) | mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) | mask, + &at91_port->abcdsr2); + writel(mask, &at91_port->pdr); } + return 0; } #endif @@ -158,16 +176,17 @@ int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_pio_input(unsigned port, u32 pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(mask, &pio->port[port].odr); - writel(mask, &pio->port[port].per); + writel(mask, &at91_port->odr); + writel(mask, &at91_port->per); } + return 0; } @@ -177,20 +196,21 @@ int at91_set_pio_input(unsigned port, u32 pin, int use_pullup) */ int at91_set_pio_output(unsigned port, u32 pin, int value) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); - writel(mask, &pio->port[port].pudr); + writel(mask, &at91_port->idr); + writel(mask, &at91_port->pudr); if (value) - writel(mask, &pio->port[port].sodr); + writel(mask, &at91_port->sodr); else - writel(mask, &pio->port[port].codr); - writel(mask, &pio->port[port].oer); - writel(mask, &pio->port[port].per); + writel(mask, &at91_port->codr); + writel(mask, &at91_port->oer); + writel(mask, &at91_port->per); } + return 0; } @@ -199,20 +219,21 @@ int at91_set_pio_output(unsigned port, u32 pin, int value) */ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (is_on) { #if defined(CPU_HAS_PIO3) - writel(mask, &pio->port[port].ifscdr); + writel(mask, &at91_port->ifscdr); #endif - writel(mask, &pio->port[port].ifer); + writel(mask, &at91_port->ifer); } else { - writel(mask, &pio->port[port].ifdr); + writel(mask, &at91_port->ifdr); } } + return 0; } @@ -222,19 +243,20 @@ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) */ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (is_on) { - writel(mask, &pio->port[port].ifscer); - writel(div & PIO_SCDR_DIV, &pio->port[port].scdr); - writel(mask, &pio->port[port].ifer); + writel(mask, &at91_port->ifscer); + writel(div & PIO_SCDR_DIV, &at91_port->scdr); + writel(mask, &at91_port->ifer); } else { - writel(mask, &pio->port[port].ifdr); + writel(mask, &at91_port->ifdr); } } + return 0; } @@ -244,17 +266,18 @@ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) */ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].pudr); + writel(mask, &at91_port->pudr); if (is_on) - writel(mask, &pio->port[port].ppder); + writel(mask, &at91_port->ppder); else - writel(mask, &pio->port[port].ppddr); + writel(mask, &at91_port->ppddr); } + return 0; } @@ -263,14 +286,15 @@ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) */ int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(readl(&pio->port[port].schmitt) | mask, - &pio->port[port].schmitt); + writel(readl(&at91_port->schmitt) | mask, + &at91_port->schmitt); } + return 0; } #endif @@ -281,16 +305,17 @@ int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) */ int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (is_on) - writel(mask, &pio->port[port].mder); + writel(mask, &at91_port->mder); else - writel(mask, &pio->port[port].mddr); + writel(mask, &at91_port->mddr); } + return 0; } @@ -299,16 +324,17 @@ int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on) */ int at91_set_pio_value(unsigned port, unsigned pin, int value) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (value) - writel(mask, &pio->port[port].sodr); + writel(mask, &at91_port->sodr); else - writel(mask, &pio->port[port].codr); + writel(mask, &at91_port->codr); } + return 0; } @@ -317,13 +343,56 @@ int at91_set_pio_value(unsigned port, unsigned pin, int value) */ int at91_get_pio_value(unsigned port, unsigned pin) { - u32 pdsr = 0; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 pdsr = 0, mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - pdsr = readl(&pio->port[port].pdsr) & mask; + pdsr = readl(&at91_port->pdsr) & mask; } + return pdsr != 0; } + +/* Common GPIO API */ + +#define at91_gpio_to_port(gpio) (gpio / 32) +#define at91_gpio_to_pin(gpio) (gpio % 32) + +int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +int gpio_free(unsigned gpio) +{ + return 0; +} + +int gpio_direction_input(unsigned gpio) +{ + at91_set_pio_input(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio), 0); + return 0; +} + +int gpio_direction_output(unsigned gpio, int value) +{ + at91_set_pio_output(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio), value); + return 0; +} + +int gpio_get_value(unsigned gpio) +{ + return at91_get_pio_value(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio)); +} + +int gpio_set_value(unsigned gpio, int value) +{ + at91_set_pio_value(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio), value); + + return 0; +} diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index f16e9ae4d2..13dcf79873 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <common.h> #include <asm/gpio.h> diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index be13745921..7371cd4a87 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -47,9 +47,6 @@ struct pca953x_chip_ngpio { static struct pca953x_chip_ngpio pca953x_chip_ngpios[] = CONFIG_SYS_I2C_PCA953X_WIDTH; -#define NUM_CHIP_GPIOS (sizeof(pca953x_chip_ngpios) / \ - sizeof(struct pca953x_chip_ngpio)) - /* * Determine the number of GPIO pins supported. If we don't know we assume * 8 pins. @@ -58,7 +55,7 @@ static int pca953x_ngpio(uint8_t chip) { int i; - for (i = 0; i < NUM_CHIP_GPIOS; i++) + for (i = 0; i < ARRAY_SIZE(pca953x_chip_ngpios); i++) if (pca953x_chip_ngpios[i].chip == chip) return pca953x_chip_ngpios[i].ngpio; diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 38455e1c66..291ad946db 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -206,9 +206,58 @@ static unsigned int get_i2c_clock(int bus) return gd->arch.i2c1_clk; /* I2C1 clock */ } +static int fsl_i2c_fixup(const struct fsl_i2c *dev) +{ + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); + unsigned long long timeval = 0; + int ret = -1; + unsigned int flags = 0; + +#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 + unsigned int svr = get_svr(); + if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || + (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) + flags = I2C_CR_BIT6; +#endif + + writeb(I2C_CR_MEN | I2C_CR_MSTA, &dev->cr); + + timeval = get_ticks(); + while (!(readb(&dev->sr) & I2C_SR_MBB)) { + if ((get_ticks() - timeval) > timeout) + goto err; + } + + if (readb(&dev->sr) & I2C_SR_MAL) { + /* SDA is stuck low */ + writeb(0, &dev->cr); + udelay(100); + writeb(I2C_CR_MSTA | flags, &dev->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | flags, &dev->cr); + } + + readb(&dev->dr); + + timeval = get_ticks(); + while (!(readb(&dev->sr) & I2C_SR_MIF)) { + if ((get_ticks() - timeval) > timeout) + goto err; + } + ret = 0; + +err: + writeb(I2C_CR_MEN | flags, &dev->cr); + writeb(0, &dev->sr); + udelay(100); + + return ret; +} + static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { const struct fsl_i2c *dev; + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); + unsigned long long timeval; #ifdef CONFIG_SYS_I2C_INIT_BOARD /* Call board specific i2c bus reset routine before accessing the @@ -226,6 +275,18 @@ static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ + timeval = get_ticks(); + while (readb(&dev->sr) & I2C_SR_MBB) { + if ((get_ticks() - timeval) < timeout) + continue; + + if (fsl_i2c_fixup(dev)) + debug("i2c_init: BUS#%d failed to init\n", + adap->hwadapnr); + + break; + } + #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT /* Call board specific i2c bus reset routine AFTER the bus has been * initialized. Use either this callpoint or i2c_init_board; @@ -394,8 +455,10 @@ fsl_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen, int i = -1; /* signal error */ u8 *a = (u8*)&addr; - if (i2c_wait4bus(adap) >= 0 && - i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 && + if (i2c_wait4bus(adap) < 0) + return -1; + + if (i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 && __i2c_write(adap, &a[4 - alen], alen) == alen) { i = __i2c_write(adap, data, length); } diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index a2baec0ace..396fea89af 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -105,11 +105,11 @@ DECLARE_GLOBAL_DATA_PTR; # endif #endif -#if !defined(CONFIG_SYS_SOFT_I2C_SPEED) -#define CONFIG_SYS_SOFT_I2C_SPEED CONFIG_SYS_I2C_SPEED +#if !defined(CONFIG_SYS_I2C_SOFT_SPEED) +#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED #endif -#if !defined(CONFIG_SYS_SOFT_I2C_SLAVE) -#define CONFIG_SYS_SOFT_I2C_SLAVE CONFIG_SYS_I2C_SLAVE +#if !defined(CONFIG_SYS_I2C_SOFT_SLAVE) +#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE #endif /*----------------------------------------------------------------------- diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index 9ac3969a07..9847cf126b 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -453,6 +453,10 @@ void i2c_init_board(void) static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) { + /* No i2c support prior to relocation */ + if (!(gd->flags & GD_FLG_RELOC)) + return; + /* This will override the speed selected in the fdt for that port */ debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr); i2c_set_bus_speed(speed); diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 49e5cb9c2a..bedf833f70 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -32,6 +32,9 @@ COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o +ifdef CONFIG_SPL_BUILD +COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o +endif COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c new file mode 100644 index 0000000000..65c52a22db --- /dev/null +++ b/drivers/mmc/fsl_esdhc_spl.c @@ -0,0 +1,115 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <mmc.h> +#include <malloc.h> + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 +#define MBRDBR_BOOT_SIG_55 0x1fe +#define MBRDBR_BOOT_SIG_AA 0x1ff +#define CONFIG_CFG_DATA_SECTOR 0 + +/* + * The main entry for mmc booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from mmc into SDRAM and starts it from there. + */ + +void __noreturn mmc_boot(void) +{ + __attribute__((noreturn)) void (*uboot)(void); + uint blk_start, blk_cnt, err; + u32 blklen; + uchar *tmp_buf; + uchar val; + uint i, byte_num; + u32 offset, code_len; + struct mmc *mmc; + + mmc = find_mmc_device(0); + if (!mmc) { + puts("spl: mmc device not found!!\n"); + hang(); + } + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) { + puts("spl: malloc memory failed!!\n"); + hang(); + } + memset(tmp_buf, 0, blklen); + + /* + * Read source addr from sd card + */ + err = mmc->block_dev.block_read(0, CONFIG_CFG_DATA_SECTOR, 1, tmp_buf); + if (err != 1) { + puts("spl: mmc read failed!!\n"); + free(tmp_buf); + hang(); + } + + val = *(tmp_buf + MBRDBR_BOOT_SIG_55); + if (0x55 != val) { + puts("spl: mmc signature is not valid!!\n"); + free(tmp_buf); + hang(); + } + val = *(tmp_buf + MBRDBR_BOOT_SIG_AA); + if (0xAA != val) { + puts("spl: mmc signature is not valid!!\n"); + free(tmp_buf); + hang(); + } + + byte_num = 4; + offset = 0; + for (i = 0; i < byte_num; i++) { + val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i); + offset = (offset << 8) + val; + } + offset += CONFIG_SYS_MMC_U_BOOT_OFFS; + /* Get the code size from offset 0x48 */ + byte_num = 4; + code_len = 0; + for (i = 0; i < byte_num; i++) { + val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i); + code_len = (code_len << 8) + val; + } + code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS; + /* + * Load U-Boot image from mmc into RAM + */ + blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; + blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len; + err = mmc->block_dev.block_read(0, blk_start, blk_cnt, + (uchar *)CONFIG_SYS_MMC_U_BOOT_DST); + if (err != blk_cnt) { + puts("spl: mmc read failed!!\n"); + free(tmp_buf); + hang(); + } + + /* + * Clean d-cache and invalidate i-cache, to + * make sure that no stale data is executed. + */ + flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE); + + /* + * Jump to U-Boot image + */ + uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START; + (*uboot)(); +} diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 4da8db9bed..55026759ed 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1483,7 +1483,9 @@ int mmc_initialize(bd_t *bis) if (board_mmc_init(bis) < 0) cpu_mmc_init(bis); +#ifndef CONFIG_SPL_BUILD print_mmc_devices(','); +#endif do_preinit(); return 0; diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index e5a5d7532c..245f9d0c67 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -410,7 +410,8 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | - MMC_MODE_HS_52MHz | MMC_MODE_HS; + MMC_MODE_HS_52MHz | MMC_MODE_HS | + MMC_MODE_HC; /* * SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index a37663eeb4..a389cd101c 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1803,7 +1803,7 @@ static int flash_detect_legacy(phys_addr_t base, int banknum) break; else unmap_physmem((void *)info->start[0], - MAP_NOCACHE); + info->portwidth); } } diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index e27e0b7050..366dee6670 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -23,6 +23,7 @@ COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o +COBJS-$(CONFIG_SPL_NAND_INIT) += nand.o else # not spl diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index f844990e38..da83f06e47 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -16,6 +16,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91_pio.h> +#include <malloc.h> #include <nand.h> #include <watchdog.h> @@ -50,13 +51,13 @@ struct atmel_nand_host { void __iomem *pmecc_index_of; /* data for pmecc computation */ - int16_t pmecc_smu[(CONFIG_PMECC_CAP + 2) * (2 * CONFIG_PMECC_CAP + 1)]; - int16_t pmecc_partial_syn[2 * CONFIG_PMECC_CAP + 1]; - int16_t pmecc_si[2 * CONFIG_PMECC_CAP + 1]; - int16_t pmecc_lmu[CONFIG_PMECC_CAP + 1]; /* polynomal order */ - int pmecc_mu[CONFIG_PMECC_CAP + 1]; - int pmecc_dmu[CONFIG_PMECC_CAP + 1]; - int pmecc_delta[CONFIG_PMECC_CAP + 1]; + int16_t *pmecc_smu; + int16_t *pmecc_partial_syn; + int16_t *pmecc_si; + int16_t *pmecc_lmu; /* polynomal order */ + int *pmecc_mu; + int *pmecc_dmu; + int *pmecc_delta; }; static struct atmel_nand_host pmecc_host; @@ -109,6 +110,48 @@ static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) table_size * sizeof(int16_t); } +static void pmecc_data_free(struct atmel_nand_host *host) +{ + free(host->pmecc_partial_syn); + free(host->pmecc_si); + free(host->pmecc_lmu); + free(host->pmecc_smu); + free(host->pmecc_mu); + free(host->pmecc_dmu); + free(host->pmecc_delta); +} + +static int pmecc_data_alloc(struct atmel_nand_host *host) +{ + const int cap = host->pmecc_corr_cap; + int size; + + size = (2 * cap + 1) * sizeof(int16_t); + host->pmecc_partial_syn = malloc(size); + host->pmecc_si = malloc(size); + host->pmecc_lmu = malloc((cap + 1) * sizeof(int16_t)); + host->pmecc_smu = malloc((cap + 2) * size); + + size = (cap + 1) * sizeof(int); + host->pmecc_mu = malloc(size); + host->pmecc_dmu = malloc(size); + host->pmecc_delta = malloc(size); + + if (host->pmecc_partial_syn && + host->pmecc_si && + host->pmecc_lmu && + host->pmecc_smu && + host->pmecc_mu && + host->pmecc_dmu && + host->pmecc_delta) + return 0; + + /* error happened */ + pmecc_data_free(host); + return -ENOMEM; + +} + static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector) { struct nand_chip *nand_chip = mtd->priv; @@ -622,6 +665,99 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE); } +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION +/* + * get_onfi_ecc_param - Get ECC requirement from ONFI parameters + * @ecc_bits: store the ONFI ECC correct bits capbility + * @sector_size: in how many bytes that ONFI require to correct @ecc_bits + * + * Returns -1 if ONFI parameters is not supported. In this case @ecc_bits, + * @sector_size are initialize to 0. + * Return 0 if success to get the ECC requirement. + */ +static int get_onfi_ecc_param(struct nand_chip *chip, + int *ecc_bits, int *sector_size) +{ + *ecc_bits = *sector_size = 0; + + if (chip->onfi_params.ecc_bits == 0xff) + /* TODO: the sector_size and ecc_bits need to be find in + * extended ecc parameter, currently we don't support it. + */ + return -1; + + *ecc_bits = chip->onfi_params.ecc_bits; + + /* The default sector size (ecc codeword size) is 512 */ + *sector_size = 512; + + return 0; +} + +/* + * pmecc_choose_ecc - Get ecc requirement from ONFI parameters. If + * pmecc_corr_cap or pmecc_sector_size is 0, then set it as + * ONFI ECC parameters. + * @host: point to an atmel_nand_host structure. + * if host->pmecc_corr_cap is 0 then set it as the ONFI ecc_bits. + * if host->pmecc_sector_size is 0 then set it as the ONFI sector_size. + * @chip: point to an nand_chip structure. + * @cap: store the ONFI ECC correct bits capbility + * @sector_size: in how many bytes that ONFI require to correct @ecc_bits + * + * Return 0 if success. otherwise return the error code. + */ +static int pmecc_choose_ecc(struct atmel_nand_host *host, + struct nand_chip *chip, + int *cap, int *sector_size) +{ + /* Get ECC requirement from ONFI parameters */ + *cap = *sector_size = 0; + if (chip->onfi_version) { + if (!get_onfi_ecc_param(chip, cap, sector_size)) { + MTDDEBUG(MTD_DEBUG_LEVEL1, "ONFI params, minimum required ECC: %d bits in %d bytes\n", + *cap, *sector_size); + } else { + dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n"); + } + } else { + dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes"); + } + if (*cap == 0 && *sector_size == 0) { + /* Non-ONFI compliant or use extended ONFI parameters */ + *cap = 2; + *sector_size = 512; + } + + /* If head file doesn't specify then use the one in ONFI parameters */ + if (host->pmecc_corr_cap == 0) { + /* use the most fitable ecc bits (the near bigger one ) */ + if (*cap <= 2) + host->pmecc_corr_cap = 2; + else if (*cap <= 4) + host->pmecc_corr_cap = 4; + else if (*cap <= 8) + host->pmecc_corr_cap = 8; + else if (*cap <= 12) + host->pmecc_corr_cap = 12; + else if (*cap <= 24) + host->pmecc_corr_cap = 24; + else + return -EINVAL; + } + if (host->pmecc_sector_size == 0) { + /* use the most fitable sector size (the near smaller one ) */ + if (*sector_size >= 1024) + host->pmecc_sector_size = 1024; + else if (*sector_size >= 512) + host->pmecc_sector_size = 512; + else + return -EINVAL; + } + return 0; +} +#endif + static int atmel_pmecc_nand_init_params(struct nand_chip *nand, struct mtd_info *mtd) { @@ -635,9 +771,45 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, nand->ecc.correct = NULL; nand->ecc.hwctl = NULL; - cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP; - sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; - host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET; +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION + host->pmecc_corr_cap = host->pmecc_sector_size = 0; + +#ifdef CONFIG_PMECC_CAP + host->pmecc_corr_cap = CONFIG_PMECC_CAP; +#endif +#ifdef CONFIG_PMECC_SECTOR_SIZE + host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; +#endif + /* Get ECC requirement of ONFI parameters. And if CONFIG_PMECC_CAP or + * CONFIG_PMECC_SECTOR_SIZE not defined, then use ecc_bits, sector_size + * from ONFI. + */ + if (pmecc_choose_ecc(host, nand, &cap, §or_size)) { + dev_err(host->dev, "The NAND flash's ECC requirement(ecc_bits: %d, sector_size: %d) are not support!", + cap, sector_size); + return -EINVAL; + } + + if (cap > host->pmecc_corr_cap) + dev_info(host->dev, "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n", + host->pmecc_corr_cap, cap); + if (sector_size < host->pmecc_sector_size) + dev_info(host->dev, "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n", + host->pmecc_sector_size, sector_size); +#else /* CONFIG_SYS_NAND_ONFI_DETECTION */ + host->pmecc_corr_cap = CONFIG_PMECC_CAP; + host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; +#endif + + cap = host->pmecc_corr_cap; + sector_size = host->pmecc_sector_size; + + /* TODO: need check whether cap & sector_size is validate */ + + if (host->pmecc_sector_size == 512) + host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512; + else + host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024; MTDDEBUG(MTD_DEBUG_LEVEL1, "Initialize PMECC params, cap: %d, sector: %d\n", @@ -655,7 +827,8 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, switch (mtd->writesize) { case 2048: case 4096: - host->pmecc_degree = PMECC_GF_DIMENSION_13; + host->pmecc_degree = (sector_size == 512) ? + PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14; host->pmecc_cw_len = (1 << host->pmecc_degree) - 1; host->pmecc_sector_number = mtd->writesize / sector_size; host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes( @@ -691,6 +864,12 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, return 0; } + /* Allocate data for PMECC computation */ + if (pmecc_data_alloc(host)) { + dev_err(host->dev, "Cannot allocate memory for PMECC computation!\n"); + return -ENOMEM; + } + nand->ecc.read_page = atmel_nand_pmecc_read_page; nand->ecc.write_page = atmel_nand_pmecc_write_page; nand->ecc.strength = cap; diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c index 7e5599ac63..a7476b49bb 100644 --- a/drivers/mtd/nand/fsl_elbc_spl.c +++ b/drivers/mtd/nand/fsl_elbc_spl.c @@ -34,7 +34,11 @@ static void nand_wait(void) } } +#ifdef CONFIG_TPL_BUILD +int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) +#else static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) +#endif { fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; @@ -114,6 +118,15 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) } /* + * Defines a static function nand_load_image() here, because non-static makes + * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) + */ +#ifndef CONFIG_TPL_BUILD +#define nand_spl_load_image(offs, uboot_size, vdst) \ + nand_load_image(offs, uboot_size, vdst) +#endif + +/* * The main entry for NAND booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image * from NAND into SDRAM and starts it from there. @@ -124,17 +137,17 @@ void nand_boot(void) /* * Load U-Boot image from NAND into RAM */ - nand_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, - CONFIG_SYS_NAND_U_BOOT_SIZE, - (void *)CONFIG_SYS_NAND_U_BOOT_DST); + nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (void *)CONFIG_SYS_NAND_U_BOOT_DST); #ifdef CONFIG_NAND_ENV_DST - nand_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST); + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST); #ifdef CONFIG_ENV_OFFSET_REDUND - nand_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); + nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); #endif #endif diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 1e0210a9a4..d149a6dae6 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -51,7 +51,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) struct jffs2_unknown_node cleanmarker; erase_info_t erase; unsigned long erase_length, erased_length; /* in blocks */ - int bbtest = 1; int result; int percent_complete = -1; const char *mtd_device = meminfo->name; @@ -102,7 +101,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) puts("Size of erase exceeds limit\n"); return -EFBIG; } - if (!opts->scrub && bbtest) { + if (!opts->scrub) { int ret = mtd_block_isbad(meminfo, erase.addr); if (ret > 0) { if (!opts->quiet) diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index e537fcf54c..191138ad18 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -11,6 +11,7 @@ LIB := $(obj)libspi_flash.o ifdef CONFIG_SPL_BUILD COBJS-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o +COBJS-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index 6a92c4b774..f34df43f58 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -252,7 +252,7 @@ static int dataflash_write_p2(struct spi_flash *flash, } debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -325,7 +325,7 @@ static int dataflash_write_at45(struct spi_flash *flash, } debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -387,7 +387,7 @@ static int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len) } debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -450,7 +450,7 @@ static int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) } debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -476,7 +476,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) if (i == ARRAY_SIZE(atmel_spi_flash_table)) { debug("SF: Unsupported DataFlash ID %02x\n", - idcode[1]); + idcode[1]); return NULL; } diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c index b16e7ab098..25cfc1252c 100644 --- a/drivers/mtd/spi/eon.c +++ b/drivers/mtd/spi/eon.c @@ -54,8 +54,7 @@ struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) flash->page_size = 256; flash->sector_size = 256 * 16 * 16; - flash->size = 256 * 16 - * params->nr_sectors; + flash->size = 256 * 16 * params->nr_sectors; return flash; } diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c new file mode 100644 index 0000000000..6263d8c221 --- /dev/null +++ b/drivers/mtd/spi/fsl_espi_spl.c @@ -0,0 +1,62 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi_flash.h> +#include <malloc.h> + +#define ESPI_BOOT_IMAGE_SIZE 0x48 +#define ESPI_BOOT_IMAGE_ADDR 0x50 +#define CONFIG_CFG_DATA_SECTOR 0 + +/* + * The main entry for SPI booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from SPI into SDRAM and starts it from there. + */ +void spi_boot(void) +{ + void (*uboot)(void) __noreturn; + u32 offset, code_len; + unsigned char *buf = NULL; + struct spi_flash *flash; + + flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (flash == NULL) { + puts("\nspi_flash_probe failed"); + hang(); + } + + /* + * Load U-Boot image from SPI flash into RAM + */ + buf = malloc(flash->page_size); + if (buf == NULL) { + puts("\nmalloc failed"); + hang(); + } + memset(buf, 0, flash->page_size); + + spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR, + flash->page_size, (void *)buf); + offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR); + /* Skip spl code */ + offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE); + /* Skip spl code */ + code_len = code_len - CONFIG_SPL_MAX_SIZE; + /* copy code to DDR */ + spi_flash_read(flash, offset, code_len, + (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST); + /* + * Jump to U-Boot image + */ + flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len); + uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START; + (*uboot)(); +} diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c index 950c7770a9..b42581a70f 100644 --- a/drivers/mtd/spi/gigadevice.c +++ b/drivers/mtd/spi/gigadevice.c @@ -45,7 +45,7 @@ struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode) if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) { debug("SF: Unsupported Gigadevice ID %02x%02x\n", - idcode[1], idcode[2]); + idcode[1], idcode[2]); return NULL; } diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c index f67ddd696b..38f9d69169 100644 --- a/drivers/mtd/spi/ramtron.c +++ b/drivers/mtd/spi/ramtron.c @@ -230,7 +230,8 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) /* JEDEC conformant RAMTRON id */ for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) { params = &ramtron_spi_fram_table[i]; - if (idcode[1] == params->id1 && idcode[2] == params->id2) + if (idcode[1] == params->id1 && + idcode[2] == params->id2) goto found; } break; @@ -251,7 +252,8 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) /* now find the device */ for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) { params = &ramtron_spi_fram_table[i]; - if (!strcmp(params->name, CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC)) + if (!strcmp(params->name, + CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC)) goto found; } debug("SF: Unsupported non-JEDEC RAMTRON device " @@ -264,7 +266,7 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) /* arriving here means no method has found a device we can handle */ debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n", - idcode[0], idcode[1], idcode[2]); + idcode[0], idcode[1], idcode[2]); return NULL; found: diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index 47a48976b9..fa7ac8c932 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -6,7 +6,7 @@ * TsiChung Liew (Tsi-Chung.Liew@freescale.com), * and Jason McMullan (mcmullan@netapp.com) * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -122,7 +122,8 @@ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) } if (i == ARRAY_SIZE(spansion_spi_flash_table)) { - debug("SF: Unsupported SPANSION ID %04x %04x\n", jedec, ext_jedec); + debug("SF: Unsupported SPANSION ID %04x %04x\n", + jedec, ext_jedec); return NULL; } diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 6a6fe37e0e..5d5055ff38 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -40,12 +40,13 @@ static int spi_flash_read_write(struct spi_slave *spi, ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); if (ret) { debug("SF: Failed to send command (%zu bytes): %d\n", - cmd_len, ret); + cmd_len, ret); } else if (data_len != 0) { - ret = spi_xfer(spi, data_len * 8, data_out, data_in, SPI_XFER_END); + ret = spi_xfer(spi, data_len * 8, data_out, data_in, + SPI_XFER_END); if (ret) debug("SF: Failed to transfer %zu bytes of data: %d\n", - data_len, ret); + data_len, ret); } return ret; @@ -86,7 +87,7 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); if (ret) { debug("SF: fail to read %s status register\n", - cmd == CMD_READ_STATUS ? "read" : "flag"); + cmd == CMD_READ_STATUS ? "read" : "flag"); return ret; } @@ -144,7 +145,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, ret = spi_flash_cmd_wait_ready(flash, timeout); if (ret < 0) { debug("SF: write %s timed out\n", - timeout == SPI_FLASH_PROG_TIMEOUT ? + timeout == SPI_FLASH_PROG_TIMEOUT ? "program" : "page erase"); return ret; } @@ -554,12 +555,14 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, goto err_manufacturer_probe; } #endif +#ifndef CONFIG_SPL_BUILD printf("SF: Detected %s with page size ", flash->name); print_size(flash->sector_size, ", total "); print_size(flash->size, ""); if (flash->memory_map) printf(", mapped at %p", flash->memory_map); puts("\n"); +#endif #ifndef CONFIG_SPI_FLASH_BAR if (flash->size > SPI_FLASH_16MB_BOUN) { puts("SF: Warning - Only lower 16MiB accessible,"); diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 7c799ca482..29355307f3 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -39,7 +39,7 @@ void spl_spi_load_image(void) /* Load u-boot, mkimage header is 64 bytes. */ spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, - (void *) header); + (void *)header); spl_parse_image_header(header); spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, spl_image.size, (void *)spl_image.load_addr); diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c index 95f5490c35..256867c844 100644 --- a/drivers/mtd/spi/sst.c +++ b/drivers/mtd/spi/sst.c @@ -19,7 +19,7 @@ #include "spi_flash_internal.h" #define CMD_SST_BP 0x02 /* Byte Program */ -#define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */ +#define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ #define SST_SR_WIP (1 << 0) /* Write-in-Progress */ #define SST_SR_WEL (1 << 1) /* Write enable */ @@ -50,47 +50,61 @@ static const struct sst_spi_flash_params sst_spi_flash_table[] = { .flags = SST_FEAT_WP, .nr_sectors = 128, .name = "SST25VF040B", - },{ + }, + { .idcode1 = 0x8e, .flags = SST_FEAT_WP, .nr_sectors = 256, .name = "SST25VF080B", - },{ + }, + { .idcode1 = 0x41, .flags = SST_FEAT_WP, .nr_sectors = 512, .name = "SST25VF016B", - },{ + }, + { .idcode1 = 0x4a, .flags = SST_FEAT_WP, .nr_sectors = 1024, .name = "SST25VF032B", - },{ + }, + { .idcode1 = 0x4b, .flags = SST_FEAT_MBP, .nr_sectors = 2048, .name = "SST25VF064C", - },{ + }, + { .idcode1 = 0x01, .flags = SST_FEAT_WP, .nr_sectors = 16, .name = "SST25WF512", - },{ + }, + { .idcode1 = 0x02, .flags = SST_FEAT_WP, .nr_sectors = 32, .name = "SST25WF010", - },{ + }, + { .idcode1 = 0x03, .flags = SST_FEAT_WP, .nr_sectors = 64, .name = "SST25WF020", - },{ + }, + { .idcode1 = 0x04, .flags = SST_FEAT_WP, .nr_sectors = 128, .name = "SST25WF040", }, + { + .idcode1 = 0x05, + .flags = SST_FEAT_WP, + .nr_sectors = 256, + .name = "SST25WF080", + }, }; static int @@ -105,7 +119,7 @@ sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) }; debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", - spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); + spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); ret = spi_flash_cmd_write_enable(flash); if (ret) @@ -152,11 +166,11 @@ sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf) for (; actual < len - 1; actual += 2) { debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", - spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, cmd[0], - offset); + spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, + cmd[0], offset); ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, - buf + actual, 2); + buf + actual, 2); if (ret) { debug("SF: sst word program failed\n"); break; diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c index 0ca00f158c..c5fa64e376 100644 --- a/drivers/mtd/spi/stmicro.c +++ b/drivers/mtd/spi/stmicro.c @@ -8,7 +8,7 @@ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -18,7 +18,7 @@ #include "spi_flash_internal.h" /* M25Pxx-specific commands */ -#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */ +#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */ struct stmicro_spi_flash_params { u16 id; @@ -150,7 +150,7 @@ static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = { }, }; -struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) +struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode) { const struct stmicro_spi_flash_params *params; struct spi_flash *flash; @@ -166,17 +166,17 @@ struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) idcode[0] = 0x20; idcode[1] = 0x20; idcode[2] = idcode[3] + 1; - } else + } else { return NULL; + } } id = ((idcode[1] << 8) | idcode[2]); for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) { params = &stmicro_spi_flash_table[i]; - if (params->id == id) { + if (params->id == id) break; - } } if (i == ARRAY_SIZE(stmicro_spi_flash_table)) { diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index c399bf14d1..b31911a405 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -123,7 +123,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) if (i == ARRAY_SIZE(winbond_spi_flash_table)) { debug("SF: Unsupported Winbond ID %02x%02x\n", - idcode[1], idcode[2]); + idcode[1], idcode[2]); return NULL; } diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index 7c6e362f0e..c98867dc4a 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ * * File Name: enetemac.c diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c index f5017682d4..7f0cfe5940 100644 --- a/drivers/net/ax88180.c +++ b/drivers/net/ax88180.c @@ -157,7 +157,7 @@ static void ax88180_mac_reset (struct eth_device *dev) OUTW (dev, MISC_RESET_MAC, MISC); tmpval = INW (dev, MISC); - for (i = 0; i < (sizeof (program_seq) / sizeof (program_seq[0])); i++) + for (i = 0; i < ARRAY_SIZE(program_seq); i++) OUTW (dev, program_seq[i].value, program_seq[i].offset); } diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index e14a3598ca..690e5724b4 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -980,6 +980,8 @@ static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, if (fec_get_hwaddr(edev, dev_id, ethaddr) == 0) { debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr); memcpy(edev->enetaddr, ethaddr, 6); + if (!getenv("ethaddr")) + eth_setenv_enetaddr("ethaddr", ethaddr); } return ret; err3: diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 422c2c691e..cb099cd849 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -341,7 +341,9 @@ static int fm_eth_startup(struct fm_eth *fm_eth) mac->init_mac(mac); /* For some reason we need to set SPEED_100 */ - if ((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) && mac->set_if_mode) + if (((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) || + (fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII)) && + mac->set_if_mode) mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100); /* init bmi rx port, IM mode and disable */ diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 4bc8f35a1c..bca20b3330 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -396,6 +396,8 @@ int fm_init_common(int index, struct ccsr_fman *reg) } #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE) void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; +#else + void *addr = NULL; #endif /* Upload the Fman microcode if it's present */ diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c index 144e109fd0..592a67f2a5 100644 --- a/drivers/net/fm/memac.c +++ b/drivers/net/fm/memac.c @@ -90,6 +90,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if_mode |= (IF_MODE_GMII | IF_MODE_RM); break; case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: if_mode &= ~IF_MODE_MASK; if_mode |= (IF_MODE_GMII); break; diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c index 10c141fa26..6253f22f75 100644 --- a/drivers/net/fm/t4240.c +++ b/drivers/net/fm/t4240.c @@ -114,7 +114,45 @@ phy_interface_t fman_port_enet_if(enum fm_port port) return PHY_INTERFACE_MODE_SGMII; break; default: - return PHY_INTERFACE_MODE_NONE; + break; + } + + /* handle QSGMII */ + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + /* check lane G on SerDes1 */ + if (is_serdes_configured(QSGMII_FM1_A)) + return PHY_INTERFACE_MODE_QSGMII; + break; + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + /* check lane C on SerDes1 */ + if (is_serdes_configured(QSGMII_FM1_B)) + return PHY_INTERFACE_MODE_QSGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + /* check lane G on SerDes2 */ + if (is_serdes_configured(QSGMII_FM2_A)) + return PHY_INTERFACE_MODE_QSGMII; + break; + case FM2_DTSEC5: + case FM2_DTSEC6: + case FM2_DTSEC9: + case FM2_DTSEC10: + /* check lane C on SerDes2 */ + if (is_serdes_configured(QSGMII_FM2_B)) + return PHY_INTERFACE_MODE_QSGMII; + break; + default: + break; } return PHY_INTERFACE_MODE_NONE; diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c index 1ad952d3a9..6391f9b32f 100644 --- a/drivers/net/fsl_mcdmafec.c +++ b/drivers/net/fsl_mcdmafec.c @@ -504,7 +504,7 @@ int mcdmafec_initialize(bd_t * bis) u32 tmp = CONFIG_SYS_INTSRAM + 0x2000; #endif - for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fec_info); i++) { dev = (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE, diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c index e911dd31ec..8eee272cf1 100644 --- a/drivers/net/ftmac110.c +++ b/drivers/net/ftmac110.c @@ -1,7 +1,7 @@ /* * Faraday 10/100Mbps Ethernet Controller * - * (C) Copyright 2010 Faraday Technology + * (C) Copyright 2013 Faraday Technology * Dante Su <dantesu@faraday-tech.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -54,11 +54,11 @@ struct ftmac110_chip { uint32_t lnkup; uint32_t phy_addr; - struct ftmac110_rxd *rxd; + struct ftmac110_desc *rxd; ulong rxd_dma; uint32_t rxd_idx; - struct ftmac110_txd *txd; + struct ftmac110_desc *txd; ulong txd_dma; uint32_t txd_idx; }; @@ -69,7 +69,7 @@ static uint16_t mdio_read(struct eth_device *dev, uint8_t phyaddr, uint8_t phyreg) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; uint32_t tmp, ts; uint16_t ret = 0xffff; @@ -98,7 +98,7 @@ static void mdio_write(struct eth_device *dev, uint8_t phyaddr, uint8_t phyreg, uint16_t phydata) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; uint32_t tmp, ts; tmp = PHYCR_WRITE @@ -195,7 +195,7 @@ static int ftmac110_reset(struct eth_device *dev) uint8_t *a; uint32_t i, maccr; struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; /* 1. MAC reset */ writel(MACCR_RESET, ®s->maccr); @@ -212,14 +212,15 @@ static int ftmac110_reset(struct eth_device *dev) /* 1-1. Init tx ring */ for (i = 0; i < CFG_TXDES_NUM; ++i) { /* owned by SW */ - chip->txd[i].ct[0] = 0; + chip->txd[i].ctrl &= cpu_to_le64(FTMAC110_TXD_CLRMASK); } chip->txd_idx = 0; /* 1-2. Init rx ring */ for (i = 0; i < CFG_RXDES_NUM; ++i) { /* owned by HW */ - chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER); + chip->rxd[i].ctrl &= cpu_to_le64(FTMAC110_RXD_CLRMASK); + chip->rxd[i].ctrl |= cpu_to_le64(FTMAC110_RXD_OWNER); } chip->rxd_idx = 0; @@ -268,7 +269,7 @@ static int ftmac110_probe(struct eth_device *dev, bd_t *bis) static void ftmac110_halt(struct eth_device *dev) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; writel(0, ®s->imr); writel(0, ®s->maccr); @@ -279,8 +280,9 @@ static void ftmac110_halt(struct eth_device *dev) static int ftmac110_send(struct eth_device *dev, void *pkt, int len) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; - struct ftmac110_txd *des; + struct ftmac110_regs *regs = chip->regs; + struct ftmac110_desc *txd; + uint64_t ctrl; if (!chip->lnkup) return 0; @@ -292,24 +294,26 @@ static int ftmac110_send(struct eth_device *dev, void *pkt, int len) len = max(60, len); - des = &chip->txd[chip->txd_idx]; - if (le32_to_cpu(des->ct[0]) & FTMAC110_TXCT0_OWNER) { + txd = &chip->txd[chip->txd_idx]; + ctrl = le64_to_cpu(txd->ctrl); + if (ctrl & FTMAC110_TXD_OWNER) { /* kick-off Tx DMA */ writel(0xffffffff, ®s->txpd); printf("ftmac110: out of txd\n"); return 0; } - memcpy(des->vbuf, (void *)pkt, len); - dma_map_single(des->vbuf, len, DMA_TO_DEVICE); + memcpy(txd->vbuf, (void *)pkt, len); + dma_map_single(txd->vbuf, len, DMA_TO_DEVICE); - /* update len, fts and lts */ - des->ct[1] &= cpu_to_le32(FTMAC110_TXCT1_END); - des->ct[1] |= cpu_to_le32(FTMAC110_TXCT1_LEN(len) - | FTMAC110_TXCT1_FTS | FTMAC110_TXCT1_LTS); - - /* set owner bit and clear others */ - des->ct[0] = cpu_to_le32(FTMAC110_TXCT0_OWNER); + /* clear control bits */ + ctrl &= FTMAC110_TXD_CLRMASK; + /* set len, fts and lts */ + ctrl |= FTMAC110_TXD_LEN(len) | FTMAC110_TXD_FTS | FTMAC110_TXD_LTS; + /* set owner bit */ + ctrl |= FTMAC110_TXD_OWNER; + /* write back to descriptor */ + txd->ctrl = cpu_to_le64(ctrl); /* kick-off Tx DMA */ writel(0xffffffff, ®s->txpd); @@ -322,23 +326,24 @@ static int ftmac110_send(struct eth_device *dev, void *pkt, int len) static int ftmac110_recv(struct eth_device *dev) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_rxd *des; - uint32_t ct0, len, rlen = 0; + struct ftmac110_desc *rxd; + uint32_t len, rlen = 0; + uint64_t ctrl; uint8_t *buf; if (!chip->lnkup) return 0; do { - des = &chip->rxd[chip->rxd_idx]; - ct0 = le32_to_cpu(des->ct[0]); - if (ct0 & FTMAC110_RXCT0_OWNER) + rxd = &chip->rxd[chip->rxd_idx]; + ctrl = le64_to_cpu(rxd->ctrl); + if (ctrl & FTMAC110_RXD_OWNER) break; - len = FTMAC110_RXCT0_LEN(ct0); - buf = des->vbuf; + len = (uint32_t)FTMAC110_RXD_LEN(ctrl); + buf = rxd->vbuf; - if (ct0 & FTMAC110_RXCT0_ERRMASK) { + if (ctrl & FTMAC110_RXD_ERRMASK) { printf("ftmac110: rx error\n"); } else { dma_map_single(buf, len, DMA_FROM_DEVICE); @@ -347,7 +352,9 @@ static int ftmac110_recv(struct eth_device *dev) } /* owned by hardware */ - des->ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER); + ctrl &= FTMAC110_RXD_CLRMASK; + ctrl |= FTMAC110_RXD_OWNER; + rxd->ctrl |= cpu_to_le64(ctrl); chip->rxd_idx = (chip->rxd_idx + 1) % CFG_RXDES_NUM; } while (0); @@ -422,42 +429,43 @@ int ftmac110_initialize(bd_t *bis) /* allocate tx descriptors (it must be 16 bytes aligned) */ chip->txd = dma_alloc_coherent( - sizeof(struct ftmac110_txd) * CFG_TXDES_NUM, &chip->txd_dma); + sizeof(struct ftmac110_desc) * CFG_TXDES_NUM, &chip->txd_dma); if (!chip->txd) panic("ftmac110: out of memory 3\n"); memset(chip->txd, 0, - sizeof(struct ftmac110_txd) * CFG_TXDES_NUM); + sizeof(struct ftmac110_desc) * CFG_TXDES_NUM); for (i = 0; i < CFG_TXDES_NUM; ++i) { void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE); + if (!va) panic("ftmac110: out of memory 4\n"); - chip->txd[i].vbuf = va; - chip->txd[i].buf = cpu_to_le32(virt_to_phys(va)); - chip->txd[i].ct[1] = 0; - chip->txd[i].ct[0] = 0; /* owned by SW */ + chip->txd[i].vbuf = va; + chip->txd[i].pbuf = cpu_to_le32(virt_to_phys(va)); + chip->txd[i].ctrl = 0; /* owned by SW */ } - chip->txd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_TXCT1_END); + chip->txd[i - 1].ctrl |= cpu_to_le64(FTMAC110_TXD_END); chip->txd_idx = 0; /* allocate rx descriptors (it must be 16 bytes aligned) */ chip->rxd = dma_alloc_coherent( - sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM, &chip->rxd_dma); + sizeof(struct ftmac110_desc) * CFG_RXDES_NUM, &chip->rxd_dma); if (!chip->rxd) panic("ftmac110: out of memory 4\n"); memset((void *)chip->rxd, 0, - sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM); + sizeof(struct ftmac110_desc) * CFG_RXDES_NUM); for (i = 0; i < CFG_RXDES_NUM; ++i) { void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE + 2); + if (!va) panic("ftmac110: out of memory 5\n"); /* it needs to be exactly 2 bytes aligned */ va = ((uint8_t *)va + 2); - chip->rxd[i].vbuf = va; - chip->rxd[i].buf = cpu_to_le32(virt_to_phys(va)); - chip->rxd[i].ct[1] = cpu_to_le32(CFG_XBUF_SIZE); - chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER); + chip->rxd[i].vbuf = va; + chip->rxd[i].pbuf = cpu_to_le32(virt_to_phys(va)); + chip->rxd[i].ctrl = cpu_to_le64(FTMAC110_RXD_OWNER + | FTMAC110_RXD_BUFSZ(CFG_XBUF_SIZE)); } - chip->rxd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_RXCT1_END); + chip->rxd[i - 1].ctrl |= cpu_to_le64(FTMAC110_RXD_END); chip->rxd_idx = 0; eth_register(dev); diff --git a/drivers/net/ftmac110.h b/drivers/net/ftmac110.h index 19e4248bd3..2772ae7b70 100644 --- a/drivers/net/ftmac110.h +++ b/drivers/net/ftmac110.h @@ -1,7 +1,7 @@ /* * Faraday 10/100Mbps Ethernet Controller * - * (C) Copyright 2010 Faraday Technology + * (C) Copyright 2013 Faraday Technology * Dante Su <dantesu@faraday-tech.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -135,42 +135,42 @@ struct ftmac110_regs { /* * descriptor structure */ -struct ftmac110_rxd { - uint32_t ct[2]; - uint32_t buf; - void *vbuf; /* reserved */ +struct ftmac110_desc { + uint64_t ctrl; + uint32_t pbuf; + void *vbuf; }; -#define FTMAC110_RXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */ -#define FTMAC110_RXCT0_FRS BIT_MASK(29) /* first pkt desc */ -#define FTMAC110_RXCT0_LRS BIT_MASK(28) /* last pkt desc */ -#define FTMAC110_RXCT0_ODDNB BIT_MASK(22) /* odd nibble */ -#define FTMAC110_RXCT0_RUNT BIT_MASK(21) /* runt pkt */ -#define FTMAC110_RXCT0_FTL BIT_MASK(20) /* frame too long */ -#define FTMAC110_RXCT0_CRC BIT_MASK(19) /* pkt crc error */ -#define FTMAC110_RXCT0_ERR BIT_MASK(18) /* bus error */ -#define FTMAC110_RXCT0_ERRMASK (0x1f << 18) /* all errors */ -#define FTMAC110_RXCT0_BCST BIT_MASK(17) /* Bcst pkt */ -#define FTMAC110_RXCT0_MCST BIT_MASK(16) /* Mcst pkt */ -#define FTMAC110_RXCT0_LEN(x) ((x) & 0x7ff) - -#define FTMAC110_RXCT1_END BIT_MASK(31) -#define FTMAC110_RXCT1_BUFSZ(x) ((x) & 0x7ff) - -struct ftmac110_txd { - uint32_t ct[2]; - uint32_t buf; - void *vbuf; /* reserved */ -}; - -#define FTMAC110_TXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */ -#define FTMAC110_TXCT0_COL 0x00000003 /* collision */ - -#define FTMAC110_TXCT1_END BIT_MASK(31) /* end of ring */ -#define FTMAC110_TXCT1_TXIC BIT_MASK(30) /* tx done interrupt */ -#define FTMAC110_TXCT1_TX2FIC BIT_MASK(29) /* tx fifo interrupt */ -#define FTMAC110_TXCT1_FTS BIT_MASK(28) /* first pkt desc */ -#define FTMAC110_TXCT1_LTS BIT_MASK(27) /* last pkt desc */ -#define FTMAC110_TXCT1_LEN(x) ((x) & 0x7ff) +#define FTMAC110_RXD_END ((uint64_t)1 << 63) +#define FTMAC110_RXD_BUFSZ(x) (((uint64_t)(x) & 0x7ff) << 32) + +#define FTMAC110_RXD_OWNER ((uint64_t)1 << 31) /* owner: 1=HW, 0=SW */ +#define FTMAC110_RXD_FRS ((uint64_t)1 << 29) /* first pkt desc */ +#define FTMAC110_RXD_LRS ((uint64_t)1 << 28) /* last pkt desc */ +#define FTMAC110_RXD_ODDNB ((uint64_t)1 << 22) /* odd nibble */ +#define FTMAC110_RXD_RUNT ((uint64_t)1 << 21) /* runt pkt */ +#define FTMAC110_RXD_FTL ((uint64_t)1 << 20) /* frame too long */ +#define FTMAC110_RXD_CRC ((uint64_t)1 << 19) /* pkt crc error */ +#define FTMAC110_RXD_ERR ((uint64_t)1 << 18) /* bus error */ +#define FTMAC110_RXD_ERRMASK ((uint64_t)0x1f << 18) +#define FTMAC110_RXD_BCST ((uint64_t)1 << 17) /* Bcst pkt */ +#define FTMAC110_RXD_MCST ((uint64_t)1 << 16) /* Mcst pkt */ +#define FTMAC110_RXD_LEN(x) ((uint64_t)((x) & 0x7ff)) + +#define FTMAC110_RXD_CLRMASK \ + (FTMAC110_RXD_END | FTMAC110_RXD_BUFSZ(0x7ff)) + +#define FTMAC110_TXD_END ((uint64_t)1 << 63) /* end of ring */ +#define FTMAC110_TXD_TXIC ((uint64_t)1 << 62) /* tx done interrupt */ +#define FTMAC110_TXD_TX2FIC ((uint64_t)1 << 61) /* tx fifo interrupt */ +#define FTMAC110_TXD_FTS ((uint64_t)1 << 60) /* first pkt desc */ +#define FTMAC110_TXD_LTS ((uint64_t)1 << 59) /* last pkt desc */ +#define FTMAC110_TXD_LEN(x) ((uint64_t)((x) & 0x7ff) << 32) + +#define FTMAC110_TXD_OWNER ((uint64_t)1 << 31) /* owner: 1=HW, 0=SW */ +#define FTMAC110_TXD_COL ((uint64_t)3) /* collision */ + +#define FTMAC110_TXD_CLRMASK \ + (FTMAC110_TXD_END) #endif /* FTMAC110_H */ diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c index 2bf0068533..229658abc8 100644 --- a/drivers/net/lan91c96.c +++ b/drivers/net/lan91c96.c @@ -766,7 +766,7 @@ static int lan91c96_detect_chip(struct eth_device *dev) SMC_SELECT_BANK(dev, 3); chip_id = (SMC_inw(dev, 0xA) & LAN91C96_REV_CHIPID) >> 4; SMC_SELECT_BANK(dev, 0); - for (r = 0; r < sizeof(supported_chips) / sizeof(struct id_type); r++) + for (r = 0; r < ARRAY_SIZE(supported_chips); r++) if (chip_id == supported_chips[r].id) return r; return 0; diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 1f7cc322e0..bf3983a00c 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -36,6 +36,7 @@ #include <asm/io.h> #include <asm/dma-mapping.h> #include <asm/arch/clk.h> +#include <asm-generic/errno.h> #include "macb.h" @@ -397,9 +398,14 @@ static int macb_phy_init(struct macb_device *macb) } #ifdef CONFIG_PHYLIB - phydev->bus = macb->bus; - phydev->dev = netdev; - phydev->addr = macb->phy_addr; + /* need to consider other phy interface mode */ + phydev = phy_connect(macb->bus, macb->phy_addr, netdev, + PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + printf("phy_connect failed\n"); + return -ENODEV; + } + phy_config(phydev); #endif diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 6b537d505e..7c4b210b00 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -543,7 +543,7 @@ int mcffec_initialize(bd_t * bis) u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; #endif - for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fec_info); i++) { dev = (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE, diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c index 2f2269d531..17a780c854 100644 --- a/drivers/net/mcfmii.c +++ b/drivers/net/mcfmii.c @@ -170,7 +170,7 @@ int mii_discover_phy(struct eth_device *dev) printf("PHY @ 0x%x pass %d\n", phyno, pass); #endif - for (i = 0; (i < (sizeof(phyinfo) / sizeof(phy_info_t))) + for (i = 0; (i < ARRAY_SIZE(phyinfo)) && (phyinfo[i].phyid != 0); i++) { if (phyinfo[i].phyid == phytype) { #ifdef ET_DEBUG diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c index 39391580fe..e6cd3e9ba0 100644 --- a/drivers/net/ne2000.c +++ b/drivers/net/ne2000.c @@ -228,7 +228,7 @@ int get_prom(u8* mac_addr, u8* base_addr) mdelay (10); - for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++) + for (i = 0; i < ARRAY_SIZE(program_seq); i++) n2k_outb (program_seq[i].value, program_seq[i].offset); PRINTK ("PROM:"); diff --git a/drivers/net/npe/IxEthAcc.c b/drivers/net/npe/IxEthAcc.c index 7185558955..05a9e053ff 100644 --- a/drivers/net/npe/IxEthAcc.c +++ b/drivers/net/npe/IxEthAcc.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c index b93a8c8a31..8249737b0c 100644 --- a/drivers/net/npe/IxEthAccCommon.c +++ b/drivers/net/npe/IxEthAccCommon.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccControlInterface.c b/drivers/net/npe/IxEthAccControlInterface.c index 44328473e6..dbe32e133c 100644 --- a/drivers/net/npe/IxEthAccControlInterface.c +++ b/drivers/net/npe/IxEthAccControlInterface.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccDataPlane.c b/drivers/net/npe/IxEthAccDataPlane.c index 6df3307e5d..c0b82d99b7 100644 --- a/drivers/net/npe/IxEthAccDataPlane.c +++ b/drivers/net/npe/IxEthAccDataPlane.c @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccMac.c b/drivers/net/npe/IxEthAccMac.c index 5540b33ae8..65113448d2 100644 --- a/drivers/net/npe/IxEthAccMac.c +++ b/drivers/net/npe/IxEthAccMac.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccMii.c b/drivers/net/npe/IxEthAccMii.c index d282aa6725..bfe606f507 100644 --- a/drivers/net/npe/IxEthAccMii.c +++ b/drivers/net/npe/IxEthAccMii.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBAPI.c b/drivers/net/npe/IxEthDBAPI.c index d46c47c2ef..023cf50248 100644 --- a/drivers/net/npe/IxEthDBAPI.c +++ b/drivers/net/npe/IxEthDBAPI.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBAPISupport.c b/drivers/net/npe/IxEthDBAPISupport.c index 1facb89fd8..c265d942e0 100644 --- a/drivers/net/npe/IxEthDBAPISupport.c +++ b/drivers/net/npe/IxEthDBAPISupport.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBCore.c b/drivers/net/npe/IxEthDBCore.c index 8b3c1d9a80..3d3050d5ce 100644 --- a/drivers/net/npe/IxEthDBCore.c +++ b/drivers/net/npe/IxEthDBCore.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBEvents.c b/drivers/net/npe/IxEthDBEvents.c index 529063d1ff..5b3be0b6c1 100644 --- a/drivers/net/npe/IxEthDBEvents.c +++ b/drivers/net/npe/IxEthDBEvents.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBFeatures.c b/drivers/net/npe/IxEthDBFeatures.c index c5b680a742..1f7624016a 100644 --- a/drivers/net/npe/IxEthDBFeatures.c +++ b/drivers/net/npe/IxEthDBFeatures.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -144,7 +120,7 @@ void ixEthDBFeatureCapabilityScan(void) /* find the traffic class definition index compatible with the current NPE A functionality ID */ for (trafficClassDefinitionIndex = 0 ; - trafficClassDefinitionIndex < sizeof (ixEthDBTrafficClassDefinitions) / sizeof (ixEthDBTrafficClassDefinitions[0]); + trafficClassDefinitionIndex < ARRAY_SIZE(ixEthDBTrafficClassDefinitions); trafficClassDefinitionIndex++) { if (ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX] == npeAImageId.functionalityId) @@ -155,7 +131,7 @@ void ixEthDBFeatureCapabilityScan(void) } /* select the default case if we went over the array boundary */ - if (trafficClassDefinitionIndex == sizeof (ixEthDBTrafficClassDefinitions) / sizeof (ixEthDBTrafficClassDefinitions[0])) + if (trafficClassDefinitionIndex == ARRAY_SIZE(ixEthDBTrafficClassDefinitions)) { trafficClassDefinitionIndex = 0; /* the first record is the default case */ } diff --git a/drivers/net/npe/IxEthDBFirewall.c b/drivers/net/npe/IxEthDBFirewall.c index 6fb5ab6acd..c0ae5624ff 100644 --- a/drivers/net/npe/IxEthDBFirewall.c +++ b/drivers/net/npe/IxEthDBFirewall.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBHashtable.c b/drivers/net/npe/IxEthDBHashtable.c index f1b18e6b48..9493a5b48b 100644 --- a/drivers/net/npe/IxEthDBHashtable.c +++ b/drivers/net/npe/IxEthDBHashtable.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBLearning.c b/drivers/net/npe/IxEthDBLearning.c index 840674152f..1080d112de 100644 --- a/drivers/net/npe/IxEthDBLearning.c +++ b/drivers/net/npe/IxEthDBLearning.c @@ -11,31 +11,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBMem.c b/drivers/net/npe/IxEthDBMem.c index 133cbef8d6..78fce4bd92 100644 --- a/drivers/net/npe/IxEthDBMem.c +++ b/drivers/net/npe/IxEthDBMem.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBNPEAdaptor.c b/drivers/net/npe/IxEthDBNPEAdaptor.c index d47ffec8b5..30e1f61ab9 100644 --- a/drivers/net/npe/IxEthDBNPEAdaptor.c +++ b/drivers/net/npe/IxEthDBNPEAdaptor.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBPortUpdate.c b/drivers/net/npe/IxEthDBPortUpdate.c index 813e4ee6b5..92af331a54 100644 --- a/drivers/net/npe/IxEthDBPortUpdate.c +++ b/drivers/net/npe/IxEthDBPortUpdate.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBReports.c b/drivers/net/npe/IxEthDBReports.c index 912e608613..d74f1215fd 100644 --- a/drivers/net/npe/IxEthDBReports.c +++ b/drivers/net/npe/IxEthDBReports.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBSearch.c b/drivers/net/npe/IxEthDBSearch.c index 75fdebe483..4fd28da080 100644 --- a/drivers/net/npe/IxEthDBSearch.c +++ b/drivers/net/npe/IxEthDBSearch.c @@ -11,31 +11,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBSpanningTree.c b/drivers/net/npe/IxEthDBSpanningTree.c index 029f7ac93c..e12be0d884 100644 --- a/drivers/net/npe/IxEthDBSpanningTree.c +++ b/drivers/net/npe/IxEthDBSpanningTree.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBUtil.c b/drivers/net/npe/IxEthDBUtil.c index 24acc246b7..40d4470bef 100644 --- a/drivers/net/npe/IxEthDBUtil.c +++ b/drivers/net/npe/IxEthDBUtil.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c index 522a30b1dd..483e348934 100644 --- a/drivers/net/npe/IxEthDBVlan.c +++ b/drivers/net/npe/IxEthDBVlan.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBWiFi.c b/drivers/net/npe/IxEthDBWiFi.c index 0a6043f364..44edd47f2f 100644 --- a/drivers/net/npe/IxEthDBWiFi.c +++ b/drivers/net/npe/IxEthDBWiFi.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c index f8b439d9da..27f3548ce0 100644 --- a/drivers/net/npe/IxEthMii.c +++ b/drivers/net/npe/IxEthMii.c @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxFeatureCtrl.c b/drivers/net/npe/IxFeatureCtrl.c index b6728e4a44..0b6807d9d7 100644 --- a/drivers/net/npe/IxFeatureCtrl.c +++ b/drivers/net/npe/IxFeatureCtrl.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDl.c b/drivers/net/npe/IxNpeDl.c index bfeac87790..0e5c428323 100644 --- a/drivers/net/npe/IxNpeDl.c +++ b/drivers/net/npe/IxNpeDl.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDlImageMgr.c b/drivers/net/npe/IxNpeDlImageMgr.c index 0484483882..52f73d7ad8 100644 --- a/drivers/net/npe/IxNpeDlImageMgr.c +++ b/drivers/net/npe/IxNpeDlImageMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDlNpeMgr.c b/drivers/net/npe/IxNpeDlNpeMgr.c index aaffeeb0cc..8d94dfac3d 100644 --- a/drivers/net/npe/IxNpeDlNpeMgr.c +++ b/drivers/net/npe/IxNpeDlNpeMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDlNpeMgrUtils.c b/drivers/net/npe/IxNpeDlNpeMgrUtils.c index 18cac50208..db50d22d1b 100644 --- a/drivers/net/npe/IxNpeDlNpeMgrUtils.c +++ b/drivers/net/npe/IxNpeDlNpeMgrUtils.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMh.c b/drivers/net/npe/IxNpeMh.c index 2870ff7da5..5adabd82fc 100644 --- a/drivers/net/npe/IxNpeMh.c +++ b/drivers/net/npe/IxNpeMh.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c index 092d480c65..eaa9a21ad7 100644 --- a/drivers/net/npe/IxNpeMhConfig.c +++ b/drivers/net/npe/IxNpeMhConfig.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhReceive.c b/drivers/net/npe/IxNpeMhReceive.c index 57c8be30e5..273c3733f3 100644 --- a/drivers/net/npe/IxNpeMhReceive.c +++ b/drivers/net/npe/IxNpeMhReceive.c @@ -16,33 +16,9 @@ * @par * Copyright 2001-2005, Intel Corporation. * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * + * * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhSend.c b/drivers/net/npe/IxNpeMhSend.c index 27bc9b730c..8b7038870a 100644 --- a/drivers/net/npe/IxNpeMhSend.c +++ b/drivers/net/npe/IxNpeMhSend.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c index 8e083a63bf..c539d09071 100644 --- a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c +++ b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c index d37f9f9306..082f677e62 100644 --- a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c +++ b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalBufferMgt.c b/drivers/net/npe/IxOsalBufferMgt.c index fa8db477af..f70ba05d9e 100644 --- a/drivers/net/npe/IxOsalBufferMgt.c +++ b/drivers/net/npe/IxOsalBufferMgt.c @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalIoMem.c b/drivers/net/npe/IxOsalIoMem.c index 34df92bf79..bf3acdc10c 100644 --- a/drivers/net/npe/IxOsalIoMem.c +++ b/drivers/net/npe/IxOsalIoMem.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -66,8 +42,7 @@ ixOsalMemMapFind (UINT32 requestedAddress, { UINT32 mapIndex; - UINT32 numMapElements = - sizeof (ixOsalGlobalMemoryMap) / sizeof (IxOsalMemoryMap); + UINT32 numMapElements = ARRAY_SIZE(ixOsalGlobalMemoryMap); for (mapIndex = 0; mapIndex < numMapElements; mapIndex++) { diff --git a/drivers/net/npe/IxOsalOsCacheMMU.c b/drivers/net/npe/IxOsalOsCacheMMU.c index 3db1a70da9..72d22e5882 100644 --- a/drivers/net/npe/IxOsalOsCacheMMU.c +++ b/drivers/net/npe/IxOsalOsCacheMMU.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsMsgQ.c b/drivers/net/npe/IxOsalOsMsgQ.c index 45a5c68b16..5fe368bdaf 100644 --- a/drivers/net/npe/IxOsalOsMsgQ.c +++ b/drivers/net/npe/IxOsalOsMsgQ.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsSemaphore.c b/drivers/net/npe/IxOsalOsSemaphore.c index 672bec1189..33de7f6e42 100644 --- a/drivers/net/npe/IxOsalOsSemaphore.c +++ b/drivers/net/npe/IxOsalOsSemaphore.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsServices.c b/drivers/net/npe/IxOsalOsServices.c index e18c6c4c1e..a9aa36804b 100644 --- a/drivers/net/npe/IxOsalOsServices.c +++ b/drivers/net/npe/IxOsalOsServices.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsThread.c b/drivers/net/npe/IxOsalOsThread.c index e6a4967fcd..b3caae19b1 100644 --- a/drivers/net/npe/IxOsalOsThread.c +++ b/drivers/net/npe/IxOsalOsThread.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrAqmIf.c b/drivers/net/npe/IxQMgrAqmIf.c index 738651322c..69138ccded 100644 --- a/drivers/net/npe/IxQMgrAqmIf.c +++ b/drivers/net/npe/IxQMgrAqmIf.c @@ -20,33 +20,9 @@ * @par * Copyright 2001-2005, Intel Corporation. * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * + * * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrDispatcher.c b/drivers/net/npe/IxQMgrDispatcher.c index 25a3e8539e..2baeaafeb1 100644 --- a/drivers/net/npe/IxQMgrDispatcher.c +++ b/drivers/net/npe/IxQMgrDispatcher.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrInit.c b/drivers/net/npe/IxQMgrInit.c index 61ca96c977..14687e61af 100644 --- a/drivers/net/npe/IxQMgrInit.c +++ b/drivers/net/npe/IxQMgrInit.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrQAccess.c b/drivers/net/npe/IxQMgrQAccess.c index 8885736246..13ee0f4f11 100644 --- a/drivers/net/npe/IxQMgrQAccess.c +++ b/drivers/net/npe/IxQMgrQAccess.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrQCfg.c b/drivers/net/npe/IxQMgrQCfg.c index 26ec327a8e..b64bb2dd90 100644 --- a/drivers/net/npe/IxQMgrQCfg.c +++ b/drivers/net/npe/IxQMgrQCfg.c @@ -20,31 +20,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAssert.h b/drivers/net/npe/include/IxAssert.h index eae8b3f273..8be0cafc44 100644 --- a/drivers/net/npe/include/IxAssert.h +++ b/drivers/net/npe/include/IxAssert.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmSch.h b/drivers/net/npe/include/IxAtmSch.h index 73c3be29ab..7d74771c28 100644 --- a/drivers/net/npe/include/IxAtmSch.h +++ b/drivers/net/npe/include/IxAtmSch.h @@ -25,31 +25,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxAtmTypes.h b/drivers/net/npe/include/IxAtmTypes.h index 8624c3328e..6c8d12f394 100644 --- a/drivers/net/npe/include/IxAtmTypes.h +++ b/drivers/net/npe/include/IxAtmTypes.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmdAcc.h b/drivers/net/npe/include/IxAtmdAcc.h index ae7b2434c3..291b662151 100644 --- a/drivers/net/npe/include/IxAtmdAcc.h +++ b/drivers/net/npe/include/IxAtmdAcc.h @@ -20,31 +20,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h index 7b8734563a..1a696b0e66 100644 --- a/drivers/net/npe/include/IxAtmdAccCtrl.h +++ b/drivers/net/npe/include/IxAtmdAccCtrl.h @@ -20,31 +20,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmm.h b/drivers/net/npe/include/IxAtmm.h index fcf523fca4..805b8c9bd6 100644 --- a/drivers/net/npe/include/IxAtmm.h +++ b/drivers/net/npe/include/IxAtmm.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxDmaAcc.h b/drivers/net/npe/include/IxDmaAcc.h index 45c7527de9..a62e72cc1b 100644 --- a/drivers/net/npe/include/IxDmaAcc.h +++ b/drivers/net/npe/include/IxDmaAcc.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAcc.h b/drivers/net/npe/include/IxEthAcc.h index ff706c451d..cc7e010667 100644 --- a/drivers/net/npe/include/IxEthAcc.h +++ b/drivers/net/npe/include/IxEthAcc.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxEthAccDataPlane_p.h b/drivers/net/npe/include/IxEthAccDataPlane_p.h index 8b8e6b256c..dce43d9a19 100644 --- a/drivers/net/npe/include/IxEthAccDataPlane_p.h +++ b/drivers/net/npe/include/IxEthAccDataPlane_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAccMac_p.h b/drivers/net/npe/include/IxEthAccMac_p.h index 93e9d98e76..4eafab2585 100644 --- a/drivers/net/npe/include/IxEthAccMac_p.h +++ b/drivers/net/npe/include/IxEthAccMac_p.h @@ -10,31 +10,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAccMii_p.h b/drivers/net/npe/include/IxEthAccMii_p.h index 568d4a0fa4..aff30f00af 100644 --- a/drivers/net/npe/include/IxEthAccMii_p.h +++ b/drivers/net/npe/include/IxEthAccMii_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAccQueueAssign_p.h b/drivers/net/npe/include/IxEthAccQueueAssign_p.h index e5fd16e2fb..65661a0dd5 100644 --- a/drivers/net/npe/include/IxEthAccQueueAssign_p.h +++ b/drivers/net/npe/include/IxEthAccQueueAssign_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAcc_p.h b/drivers/net/npe/include/IxEthAcc_p.h index eda3e303be..1348f4e3c8 100644 --- a/drivers/net/npe/include/IxEthAcc_p.h +++ b/drivers/net/npe/include/IxEthAcc_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDB.h b/drivers/net/npe/include/IxEthDB.h index dfdfe1ae57..9c4a6a4ec4 100644 --- a/drivers/net/npe/include/IxEthDB.h +++ b/drivers/net/npe/include/IxEthDB.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxEthDBLocks_p.h b/drivers/net/npe/include/IxEthDBLocks_p.h index 1d8b24fdf6..91ab441b26 100644 --- a/drivers/net/npe/include/IxEthDBLocks_p.h +++ b/drivers/net/npe/include/IxEthDBLocks_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDBLog_p.h b/drivers/net/npe/include/IxEthDBLog_p.h index 1d6b0bb20d..b3576236ff 100644 --- a/drivers/net/npe/include/IxEthDBLog_p.h +++ b/drivers/net/npe/include/IxEthDBLog_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDBMessages_p.h b/drivers/net/npe/include/IxEthDBMessages_p.h index ff18160c1f..5907fd59e2 100644 --- a/drivers/net/npe/include/IxEthDBMessages_p.h +++ b/drivers/net/npe/include/IxEthDBMessages_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDBPortDefs.h b/drivers/net/npe/include/IxEthDBPortDefs.h index c3acbdddef..9f5e467832 100644 --- a/drivers/net/npe/include/IxEthDBPortDefs.h +++ b/drivers/net/npe/include/IxEthDBPortDefs.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -106,7 +82,7 @@ static const IxEthDBPortDefinition ixEthDBPortDefinitions[] = * @def IX_ETH_DB_NUMBER_OF_PORTS * @brief number of supported ports */ -#define IX_ETH_DB_NUMBER_OF_PORTS (sizeof (ixEthDBPortDefinitions) / sizeof (ixEthDBPortDefinitions[0])) +#define IX_ETH_DB_NUMBER_OF_PORTS ARRAY_SIZE(ixEthDBPortDefinitions) /** * @def IX_ETH_DB_UNKNOWN_PORT diff --git a/drivers/net/npe/include/IxEthDBQoS.h b/drivers/net/npe/include/IxEthDBQoS.h index 6d34889452..6276930dc7 100644 --- a/drivers/net/npe/include/IxEthDBQoS.h +++ b/drivers/net/npe/include/IxEthDBQoS.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDB_p.h b/drivers/net/npe/include/IxEthDB_p.h index d173d12082..ddc10a5789 100644 --- a/drivers/net/npe/include/IxEthDB_p.h +++ b/drivers/net/npe/include/IxEthDB_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h index 93d3b790b2..8d7de3d4ce 100644 --- a/drivers/net/npe/include/IxEthMii.h +++ b/drivers/net/npe/include/IxEthMii.h @@ -33,31 +33,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthMii_p.h b/drivers/net/npe/include/IxEthMii_p.h index 104b65c1f0..0c48a6971a 100644 --- a/drivers/net/npe/include/IxEthMii_p.h +++ b/drivers/net/npe/include/IxEthMii_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthNpe.h b/drivers/net/npe/include/IxEthNpe.h index 21bdedc5a7..20bfa76c36 100644 --- a/drivers/net/npe/include/IxEthNpe.h +++ b/drivers/net/npe/include/IxEthNpe.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h index 1662a00139..987b00b562 100644 --- a/drivers/net/npe/include/IxFeatureCtrl.h +++ b/drivers/net/npe/include/IxFeatureCtrl.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxHssAcc.h b/drivers/net/npe/include/IxHssAcc.h index 52d5716f72..da71c42023 100644 --- a/drivers/net/npe/include/IxHssAcc.h +++ b/drivers/net/npe/include/IxHssAcc.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxI2cDrv.h b/drivers/net/npe/include/IxI2cDrv.h index 92c6b24b46..033154046f 100644 --- a/drivers/net/npe/include/IxI2cDrv.h +++ b/drivers/net/npe/include/IxI2cDrv.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeA.h b/drivers/net/npe/include/IxNpeA.h index 90669c27e7..e145b4365f 100644 --- a/drivers/net/npe/include/IxNpeA.h +++ b/drivers/net/npe/include/IxNpeA.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDl.h b/drivers/net/npe/include/IxNpeDl.h index f514c2e7d9..f87ee4b840 100644 --- a/drivers/net/npe/include/IxNpeDl.h +++ b/drivers/net/npe/include/IxNpeDl.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlImageMgr_p.h b/drivers/net/npe/include/IxNpeDlImageMgr_p.h index 622f879a41..34dd3a441c 100644 --- a/drivers/net/npe/include/IxNpeDlImageMgr_p.h +++ b/drivers/net/npe/include/IxNpeDlImageMgr_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlMacros_p.h b/drivers/net/npe/include/IxNpeDlMacros_p.h index e32906a63a..771fe74203 100644 --- a/drivers/net/npe/include/IxNpeDlMacros_p.h +++ b/drivers/net/npe/include/IxNpeDlMacros_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h index f682126677..f6c2e46de3 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h index 876a438cec..bb1f4abdf9 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h index e25e532b16..989db2c57e 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMh.h b/drivers/net/npe/include/IxNpeMh.h index 20ee38b062..3a2bf9fa48 100644 --- a/drivers/net/npe/include/IxNpeMh.h +++ b/drivers/net/npe/include/IxNpeMh.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhConfig_p.h b/drivers/net/npe/include/IxNpeMhConfig_p.h index 8c8b9ab7f0..ca47f7f108 100644 --- a/drivers/net/npe/include/IxNpeMhConfig_p.h +++ b/drivers/net/npe/include/IxNpeMhConfig_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhMacros_p.h b/drivers/net/npe/include/IxNpeMhMacros_p.h index 68f34ef357..51ee9e289b 100644 --- a/drivers/net/npe/include/IxNpeMhMacros_p.h +++ b/drivers/net/npe/include/IxNpeMhMacros_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhReceive_p.h b/drivers/net/npe/include/IxNpeMhReceive_p.h index 6416bedcbc..7b2afa0a3c 100644 --- a/drivers/net/npe/include/IxNpeMhReceive_p.h +++ b/drivers/net/npe/include/IxNpeMhReceive_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhSend_p.h b/drivers/net/npe/include/IxNpeMhSend_p.h index 977cc94a7f..0f060cc604 100644 --- a/drivers/net/npe/include/IxNpeMhSend_p.h +++ b/drivers/net/npe/include/IxNpeMhSend_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h index 40cd496c94..b094fd99cb 100644 --- a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h +++ b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h index dea8cafa25..faf6638380 100644 --- a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h +++ b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMicrocode.h b/drivers/net/npe/include/IxNpeMicrocode.h index 893d8030a1..01dcd7ad4f 100644 --- a/drivers/net/npe/include/IxNpeMicrocode.h +++ b/drivers/net/npe/include/IxNpeMicrocode.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsBufLib.h b/drivers/net/npe/include/IxOsBufLib.h index a297a97d8b..68341dca2f 100644 --- a/drivers/net/npe/include/IxOsBufLib.h +++ b/drivers/net/npe/include/IxOsBufLib.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxOsBuffMgt.h b/drivers/net/npe/include/IxOsBuffMgt.h index b7de712bc5..8b2ee964a2 100644 --- a/drivers/net/npe/include/IxOsBuffMgt.h +++ b/drivers/net/npe/include/IxOsBuffMgt.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsBuffPoolMgt.h b/drivers/net/npe/include/IxOsBuffPoolMgt.h index 4a983c7911..1e39be2782 100644 --- a/drivers/net/npe/include/IxOsBuffPoolMgt.h +++ b/drivers/net/npe/include/IxOsBuffPoolMgt.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * This module contains the implementation of the OS Services buffer pool diff --git a/drivers/net/npe/include/IxOsCacheMMU.h b/drivers/net/npe/include/IxOsCacheMMU.h index 2c8592fe80..2632cef751 100644 --- a/drivers/net/npe/include/IxOsCacheMMU.h +++ b/drivers/net/npe/include/IxOsCacheMMU.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsPrintf.h b/drivers/net/npe/include/IxOsPrintf.h index 218e140934..7b573a4555 100644 --- a/drivers/net/npe/include/IxOsPrintf.h +++ b/drivers/net/npe/include/IxOsPrintf.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServices.h b/drivers/net/npe/include/IxOsServices.h index 62e8a790b9..d3b88500e4 100644 --- a/drivers/net/npe/include/IxOsServices.h +++ b/drivers/net/npe/include/IxOsServices.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesComponents.h b/drivers/net/npe/include/IxOsServicesComponents.h index d662cd3eee..c5a6f68550 100644 --- a/drivers/net/npe/include/IxOsServicesComponents.h +++ b/drivers/net/npe/include/IxOsServicesComponents.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesEndianess.h b/drivers/net/npe/include/IxOsServicesEndianess.h index 0d6cd8ccef..383e30af56 100644 --- a/drivers/net/npe/include/IxOsServicesEndianess.h +++ b/drivers/net/npe/include/IxOsServicesEndianess.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesMemAccess.h b/drivers/net/npe/include/IxOsServicesMemAccess.h index 58e9941065..896db14ac6 100644 --- a/drivers/net/npe/include/IxOsServicesMemAccess.h +++ b/drivers/net/npe/include/IxOsServicesMemAccess.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesMemMap.h b/drivers/net/npe/include/IxOsServicesMemMap.h index 4ce37c3f67..8af108126b 100644 --- a/drivers/net/npe/include/IxOsServicesMemMap.h +++ b/drivers/net/npe/include/IxOsServicesMemMap.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsal.h b/drivers/net/npe/include/IxOsal.h index 28c44af327..ac2631c9da 100644 --- a/drivers/net/npe/include/IxOsal.h +++ b/drivers/net/npe/include/IxOsal.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalAssert.h b/drivers/net/npe/include/IxOsalAssert.h index 04a4f515aa..ac26bb6bf5 100644 --- a/drivers/net/npe/include/IxOsalAssert.h +++ b/drivers/net/npe/include/IxOsalAssert.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackward.h b/drivers/net/npe/include/IxOsalBackward.h index ea9f30731a..8e4a6fb511 100644 --- a/drivers/net/npe/include/IxOsalBackward.h +++ b/drivers/net/npe/include/IxOsalBackward.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardAssert.h b/drivers/net/npe/include/IxOsalBackwardAssert.h index be1e27255d..cf50a7a64b 100644 --- a/drivers/net/npe/include/IxOsalBackwardAssert.h +++ b/drivers/net/npe/include/IxOsalBackwardAssert.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h index 4cf80d31eb..46df29d3d2 100644 --- a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h +++ b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h index fe570e6417..d9e20c0a55 100644 --- a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h +++ b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardMemMap.h b/drivers/net/npe/include/IxOsalBackwardMemMap.h index 3881a3b6da..9b6cc72d9f 100644 --- a/drivers/net/npe/include/IxOsalBackwardMemMap.h +++ b/drivers/net/npe/include/IxOsalBackwardMemMap.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardOsServices.h b/drivers/net/npe/include/IxOsalBackwardOsServices.h index 0ccff84aee..761779d885 100644 --- a/drivers/net/npe/include/IxOsalBackwardOsServices.h +++ b/drivers/net/npe/include/IxOsalBackwardOsServices.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardOssl.h b/drivers/net/npe/include/IxOsalBackwardOssl.h index 634b494aec..c9deb544ce 100644 --- a/drivers/net/npe/include/IxOsalBackwardOssl.h +++ b/drivers/net/npe/include/IxOsalBackwardOssl.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBufferMgt.h b/drivers/net/npe/include/IxOsalBufferMgt.h index 497ed04710..1f9e373cc7 100644 --- a/drivers/net/npe/include/IxOsalBufferMgt.h +++ b/drivers/net/npe/include/IxOsalBufferMgt.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -49,33 +25,6 @@ * @par * Copyright 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBufferMgtDefault.h b/drivers/net/npe/include/IxOsalBufferMgtDefault.h index 684b52edb4..376c4980cf 100644 --- a/drivers/net/npe/include/IxOsalBufferMgtDefault.h +++ b/drivers/net/npe/include/IxOsalBufferMgtDefault.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalConfig.h b/drivers/net/npe/include/IxOsalConfig.h index d56e796393..81449f19b3 100644 --- a/drivers/net/npe/include/IxOsalConfig.h +++ b/drivers/net/npe/include/IxOsalConfig.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalEndianess.h b/drivers/net/npe/include/IxOsalEndianess.h index 3b1c739474..01de2c5e52 100644 --- a/drivers/net/npe/include/IxOsalEndianess.h +++ b/drivers/net/npe/include/IxOsalEndianess.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalIoMem.h b/drivers/net/npe/include/IxOsalIoMem.h index ea6d64d000..7cb9c18c99 100644 --- a/drivers/net/npe/include/IxOsalIoMem.h +++ b/drivers/net/npe/include/IxOsalIoMem.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalMemAccess.h b/drivers/net/npe/include/IxOsalMemAccess.h index 9e7fb87be5..be7472a2ea 100644 --- a/drivers/net/npe/include/IxOsalMemAccess.h +++ b/drivers/net/npe/include/IxOsalMemAccess.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOem.h b/drivers/net/npe/include/IxOsalOem.h index f89402620c..a1f4d21c1b 100644 --- a/drivers/net/npe/include/IxOsalOem.h +++ b/drivers/net/npe/include/IxOsalOem.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOsBufferMgt.h b/drivers/net/npe/include/IxOsalOsBufferMgt.h index 8e46586ea0..53b961673f 100644 --- a/drivers/net/npe/include/IxOsalOsBufferMgt.h +++ b/drivers/net/npe/include/IxOsalOsBufferMgt.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOsIxp400.h b/drivers/net/npe/include/IxOsalOsIxp400.h index 44a94fb30f..104c733e3b 100644 --- a/drivers/net/npe/include/IxOsalOsIxp400.h +++ b/drivers/net/npe/include/IxOsalOsIxp400.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h index 47ce3a2d80..e037823102 100644 --- a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h +++ b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h @@ -22,31 +22,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalTypes.h b/drivers/net/npe/include/IxOsalTypes.h index 06e71debfb..aefa70f0b7 100644 --- a/drivers/net/npe/include/IxOsalTypes.h +++ b/drivers/net/npe/include/IxOsalTypes.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -91,12 +67,6 @@ typedef volatile UINT32 VUINT32; */ typedef volatile INT32 VINT32; - -#ifndef NUMELEMS -#define NUMELEMS(x) (sizeof(x) / sizeof((x)[0])) -#endif - - /** * @ingroup IxOsalTypes * diff --git a/drivers/net/npe/include/IxOsalUtilitySymbols.h b/drivers/net/npe/include/IxOsalUtilitySymbols.h index f2a73db8b9..ec34df6f71 100644 --- a/drivers/net/npe/include/IxOsalUtilitySymbols.h +++ b/drivers/net/npe/include/IxOsalUtilitySymbols.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxParityENAcc.h b/drivers/net/npe/include/IxParityENAcc.h index 62fe1714f1..4d44838cb1 100644 --- a/drivers/net/npe/include/IxParityENAcc.h +++ b/drivers/net/npe/include/IxParityENAcc.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxPerfProfAcc.h b/drivers/net/npe/include/IxPerfProfAcc.h index 7e4527a055..2781ec851c 100644 --- a/drivers/net/npe/include/IxPerfProfAcc.h +++ b/drivers/net/npe/include/IxPerfProfAcc.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgr.h b/drivers/net/npe/include/IxQMgr.h index 03d7e07092..23a45413bc 100644 --- a/drivers/net/npe/include/IxQMgr.h +++ b/drivers/net/npe/include/IxQMgr.h @@ -31,31 +31,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrAqmIf_p.h b/drivers/net/npe/include/IxQMgrAqmIf_p.h index b63c4a9ef8..1b9cfd2e38 100644 --- a/drivers/net/npe/include/IxQMgrAqmIf_p.h +++ b/drivers/net/npe/include/IxQMgrAqmIf_p.h @@ -32,31 +32,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrDefines_p.h b/drivers/net/npe/include/IxQMgrDefines_p.h index 0183596af5..1c5d674ffa 100644 --- a/drivers/net/npe/include/IxQMgrDefines_p.h +++ b/drivers/net/npe/include/IxQMgrDefines_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrDispatcher_p.h b/drivers/net/npe/include/IxQMgrDispatcher_p.h index 71a3f8588e..b68a3f1327 100644 --- a/drivers/net/npe/include/IxQMgrDispatcher_p.h +++ b/drivers/net/npe/include/IxQMgrDispatcher_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrLog_p.h b/drivers/net/npe/include/IxQMgrLog_p.h index 6b685b8a28..941236a38e 100644 --- a/drivers/net/npe/include/IxQMgrLog_p.h +++ b/drivers/net/npe/include/IxQMgrLog_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrQAccess_p.h b/drivers/net/npe/include/IxQMgrQAccess_p.h index 8612670a17..363622fba6 100644 --- a/drivers/net/npe/include/IxQMgrQAccess_p.h +++ b/drivers/net/npe/include/IxQMgrQAccess_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrQCfg_p.h b/drivers/net/npe/include/IxQMgrQCfg_p.h index c9dae1ef04..5480214e9f 100644 --- a/drivers/net/npe/include/IxQMgrQCfg_p.h +++ b/drivers/net/npe/include/IxQMgrQCfg_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQueueAssignments.h b/drivers/net/npe/include/IxQueueAssignments.h index b65d621e3b..28b924723f 100644 --- a/drivers/net/npe/include/IxQueueAssignments.h +++ b/drivers/net/npe/include/IxQueueAssignments.h @@ -23,31 +23,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxSspAcc.h b/drivers/net/npe/include/IxSspAcc.h index 61d911b9ad..b4a9def274 100644 --- a/drivers/net/npe/include/IxSspAcc.h +++ b/drivers/net/npe/include/IxSspAcc.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxTimeSyncAcc.h b/drivers/net/npe/include/IxTimeSyncAcc.h index 52c4c1cfa3..f8bcffe8bd 100644 --- a/drivers/net/npe/include/IxTimeSyncAcc.h +++ b/drivers/net/npe/include/IxTimeSyncAcc.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxTimerCtrl.h b/drivers/net/npe/include/IxTimerCtrl.h index 669dd3ef28..a865b933a3 100644 --- a/drivers/net/npe/include/IxTimerCtrl.h +++ b/drivers/net/npe/include/IxTimerCtrl.h @@ -22,31 +22,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxTypes.h b/drivers/net/npe/include/IxTypes.h index c4c5a2d267..f936a50bb3 100644 --- a/drivers/net/npe/include/IxTypes.h +++ b/drivers/net/npe/include/IxTypes.h @@ -21,31 +21,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxUART.h b/drivers/net/npe/include/IxUART.h index 03a44441c5..ff23b22fe7 100644 --- a/drivers/net/npe/include/IxUART.h +++ b/drivers/net/npe/include/IxUART.h @@ -30,31 +30,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxVersionId.h b/drivers/net/npe/include/IxVersionId.h index 27796ede84..1769dcda45 100644 --- a/drivers/net/npe/include/IxVersionId.h +++ b/drivers/net/npe/include/IxVersionId.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/ix_error.h b/drivers/net/npe/include/ix_error.h index d32ace20b5..4c599996cf 100644 --- a/drivers/net/npe/include/ix_error.h +++ b/drivers/net/npe/include/ix_error.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_macros.h b/drivers/net/npe/include/ix_macros.h index 53f5942f97..b4cf7602ae 100644 --- a/drivers/net/npe/include/ix_macros.h +++ b/drivers/net/npe/include/ix_macros.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_os_type.h b/drivers/net/npe/include/ix_os_type.h index 8575096722..e14d561c28 100644 --- a/drivers/net/npe/include/ix_os_type.h +++ b/drivers/net/npe/include/ix_os_type.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_ossl.h b/drivers/net/npe/include/ix_ossl.h index b59f7d0873..eaa2629b8d 100644 --- a/drivers/net/npe/include/ix_ossl.h +++ b/drivers/net/npe/include/ix_ossl.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_symbols.h b/drivers/net/npe/include/ix_symbols.h index f7bb029d66..0006b227c6 100644 --- a/drivers/net/npe/include/ix_symbols.h +++ b/drivers/net/npe/include/ix_symbols.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_types.h b/drivers/net/npe/include/ix_types.h index fc7b1e993a..6945506049 100644 --- a/drivers/net/npe/include/ix_types.h +++ b/drivers/net/npe/include/ix_types.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/os_datatypes.h b/drivers/net/npe/include/os_datatypes.h index 4387b2a052..def891b862 100644 --- a/drivers/net/npe/include/os_datatypes.h +++ b/drivers/net/npe/include/os_datatypes.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/miiphy.c b/drivers/net/npe/miiphy.c index a04779ab46..07fcb60e9d 100644 --- a/drivers/net/npe/miiphy.c +++ b/drivers/net/npe/miiphy.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - | This source code is dual-licensed. You may use it under the terms of the - | GNU General Public License version 2, or under the license below. - | - | This source code has been made available to you by IBM on an AS-IS - | basis. Anyone receiving this source is licensed under IBM - | copyrights to use it in any way he or she deems fit, including - | copying it, modifying it, compiling it, and redistributing it either - | with or without modifications. No license under IBM patents or - | patent applications is to be implied by the copyright license. - | - | Any user of this software should understand that IBM cannot provide - | technical support for this software and will not be responsible for - | any consequences resulting from the use of this software. - | - | Any person who transfers this source code or any derivative work - | must include the IBM copyright notice, this paragraph, and the - | preceding two paragraphs in the transferred software. - | - | COPYRIGHT I B M CORPORATION 1995 - | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - +-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ | | File Name: miiphy.c diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 606a103ce6..ddbbc35e27 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -12,18 +12,18 @@ #define PHY_AUTONEGOTIATE_TIMEOUT 5000 -/* RTL8211B PHY Status Register */ -#define MIIM_RTL8211B_PHY_STATUS 0x11 -#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000 -#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000 -#define MIIM_RTL8211B_PHYSTAT_100 0x4000 -#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000 -#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800 -#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400 - - -/* RealTek RTL8211B */ -static int rtl8211b_config(struct phy_device *phydev) +/* RTL8211x PHY Status Register */ +#define MIIM_RTL8211x_PHY_STATUS 0x11 +#define MIIM_RTL8211x_PHYSTAT_SPEED 0xc000 +#define MIIM_RTL8211x_PHYSTAT_GBIT 0x8000 +#define MIIM_RTL8211x_PHYSTAT_100 0x4000 +#define MIIM_RTL8211x_PHYSTAT_DUPLEX 0x2000 +#define MIIM_RTL8211x_PHYSTAT_SPDDONE 0x0800 +#define MIIM_RTL8211x_PHYSTAT_LINK 0x0400 + + +/* RealTek RTL8211x */ +static int rtl8211x_config(struct phy_device *phydev) { phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); @@ -32,20 +32,20 @@ static int rtl8211b_config(struct phy_device *phydev) return 0; } -static int rtl8211b_parse_status(struct phy_device *phydev) +static int rtl8211x_parse_status(struct phy_device *phydev) { unsigned int speed; unsigned int mii_reg; - mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211B_PHY_STATUS); + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_STATUS); - if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + if (!(mii_reg & MIIM_RTL8211x_PHYSTAT_SPDDONE)) { int i = 0; /* in case of timeout ->link is cleared */ phydev->link = 1; puts("Waiting for PHY realtime link"); - while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + while (!(mii_reg & MIIM_RTL8211x_PHYSTAT_SPDDONE)) { /* Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts(" TIMEOUT !\n"); @@ -57,29 +57,29 @@ static int rtl8211b_parse_status(struct phy_device *phydev) putc('.'); udelay(1000); /* 1 ms */ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, - MIIM_RTL8211B_PHY_STATUS); + MIIM_RTL8211x_PHY_STATUS); } puts(" done\n"); udelay(500000); /* another 500 ms (results in faster booting) */ } else { - if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) + if (mii_reg & MIIM_RTL8211x_PHYSTAT_LINK) phydev->link = 1; else phydev->link = 0; } - if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX) + if (mii_reg & MIIM_RTL8211x_PHYSTAT_DUPLEX) phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; - speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED); + speed = (mii_reg & MIIM_RTL8211x_PHYSTAT_SPEED); switch (speed) { - case MIIM_RTL8211B_PHYSTAT_GBIT: + case MIIM_RTL8211x_PHYSTAT_GBIT: phydev->speed = SPEED_1000; break; - case MIIM_RTL8211B_PHYSTAT_100: + case MIIM_RTL8211x_PHYSTAT_100: phydev->speed = SPEED_100; break; default: @@ -89,28 +89,53 @@ static int rtl8211b_parse_status(struct phy_device *phydev) return 0; } -static int rtl8211b_startup(struct phy_device *phydev) +static int rtl8211x_startup(struct phy_device *phydev) { /* Read the Status (2x to make sure link is right) */ genphy_update_link(phydev); - rtl8211b_parse_status(phydev); + rtl8211x_parse_status(phydev); return 0; } +/* Support for RTL8211B PHY */ static struct phy_driver RTL8211B_driver = { .name = "RealTek RTL8211B", .uid = 0x1cc910, .mask = 0xfffff0, .features = PHY_GBIT_FEATURES, - .config = &rtl8211b_config, - .startup = &rtl8211b_startup, + .config = &rtl8211x_config, + .startup = &rtl8211x_startup, + .shutdown = &genphy_shutdown, +}; + +/* Support for RTL8211E-VB-CG, RTL8211E-VL-CG and RTL8211EG-VB-CG PHYs */ +static struct phy_driver RTL8211E_driver = { + .name = "RealTek RTL8211E", + .uid = 0x1cc915, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211x_config, + .startup = &rtl8211x_startup, + .shutdown = &genphy_shutdown, +}; + +/* Support for RTL8211DN PHY */ +static struct phy_driver RTL8211DN_driver = { + .name = "RealTek RTL8211DN", + .uid = 0x1cc914, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211x_config, + .startup = &rtl8211x_startup, .shutdown = &genphy_shutdown, }; int phy_realtek_init(void) { phy_register(&RTL8211B_driver); + phy_register(&RTL8211E_driver); + phy_register(&RTL8211DN_driver); return 0; } diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index f64eb8fe04..5936f9bd7f 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -62,7 +62,7 @@ static struct phy_driver lan8710_driver = { .name = "SMSC LAN8710/LAN8720", .uid = 0x0007c0f0, .mask = 0xffff0, - .features = PHY_GBIT_FEATURES, + .features = PHY_BASIC_FEATURES, .config = &genphy_config_aneg, .startup = &smsc_startup, .shutdown = &genphy_shutdown, diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 17ca961abf..d55db1a0b6 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -28,12 +28,6 @@ DECLARE_GLOBAL_DATA_PTR; #include <asm/io.h> #include <asm/fsl_pci.h> -/* Freescale-specific PCI config registers */ -#define FSL_PCI_PBFR 0x44 -#define FSL_PCIE_CAP_ID 0x4c -#define FSL_PCIE_CFG_RDY 0x4b0 -#define FSL_PROG_IF_AGENT 0x1 - #ifndef CONFIG_SYS_PCI_MEMORY_BUS #define CONFIG_SYS_PCI_MEMORY_BUS 0 #endif @@ -424,6 +418,15 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) udelay(1); #endif if (pcie_cap == PCI_CAP_ID_EXP) { + if (block_rev >= PEX_IP_BLK_REV_3_0) { +#define PEX_CSR0_LTSSM_MASK 0xFC +#define PEX_CSR0_LTSSM_SHIFT 2 + ltssm = (in_be32(&pci->pex_csr0) + & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT; + enabled = (ltssm == 0x11) ? 1 : 0; + } else { + /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */ + /* enabled = ltssm >= PCI_LTSSM_L0; */ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); enabled = ltssm >= PCI_LTSSM_L0; @@ -456,6 +459,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) PCI_BASE_ADDRESS_0, pcicsrbar); } #endif + } #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 if (enabled == 0) { @@ -564,6 +568,10 @@ int fsl_is_pci_agent(struct pci_controller *hose) u8 prog_if; pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + /* Programming Interface (PCI_CLASS_PROG) + * 0 == pci host or pcie root-complex, + * 1 == pci agent or pcie end-point + */ return (prog_if == FSL_PROG_IF_AGENT); } } diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index 66b3bab462..ac768708ea 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -98,7 +98,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) int pmic_probe(struct pmic *p) { - I2C_SET_BUS(p->bus); + i2c_set_bus_num(p->bus); debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name); if (i2c_probe(pmic_i2c_addr)) { printf("Can't find PMIC:%s\n", p->name); diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 697f2bb4e8..4c45bfa363 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -38,6 +38,7 @@ COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o COBJS-$(CONFIG_FSL_LPUART) += serial_lpuart.o +COBJS-$(CONFIG_MXS_AUART) += mxs_auart.o ifndef CONFIG_SPL_BUILD COBJS-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c index c217c88e59..5dfb02f470 100644 --- a/drivers/serial/arm_dcc.c +++ b/drivers/serial/arm_dcc.c @@ -27,7 +27,7 @@ */ #include <common.h> -#include <stdio_dev.h> +#include <serial.h> #if defined(CONFIG_CPU_V6) /* @@ -89,12 +89,12 @@ #define TIMEOUT_COUNT 0x4000000 -int arm_dcc_init(void) +static int arm_dcc_init(void) { return 0; } -int arm_dcc_getc(void) +static int arm_dcc_getc(void) { int ch; register unsigned int reg; @@ -107,7 +107,7 @@ int arm_dcc_getc(void) return ch; } -void arm_dcc_putc(char ch) +static void arm_dcc_putc(char ch) { register unsigned int reg; unsigned int timeout_count = TIMEOUT_COUNT; @@ -123,13 +123,7 @@ void arm_dcc_putc(char ch) write_dcc(ch); } -void arm_dcc_puts(const char *s) -{ - while (*s) - arm_dcc_putc(*s++); -} - -int arm_dcc_tstc(void) +static int arm_dcc_tstc(void) { register unsigned int reg; @@ -138,22 +132,27 @@ int arm_dcc_tstc(void) return reg; } -static struct stdio_dev arm_dcc_dev; +static void arm_dcc_setbrg(void) +{ +} -int drv_arm_dcc_init(void) +static struct serial_device arm_dcc_drv = { + .name = "arm_dcc", + .start = arm_dcc_init, + .stop = NULL, + .setbrg = arm_dcc_setbrg, + .putc = arm_dcc_putc, + .puts = default_serial_puts, + .getc = arm_dcc_getc, + .tstc = arm_dcc_tstc, +}; + +void arm_dcc_initialize(void) { - strcpy(arm_dcc_dev.name, "dcc"); - arm_dcc_dev.ext = 0; /* No extensions */ - arm_dcc_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_OUTPUT; - arm_dcc_dev.tstc = arm_dcc_tstc; /* 'tstc' function */ - arm_dcc_dev.getc = arm_dcc_getc; /* 'getc' function */ - arm_dcc_dev.putc = arm_dcc_putc; /* 'putc' function */ - arm_dcc_dev.puts = arm_dcc_puts; /* 'puts' function */ - - return stdio_register(&arm_dcc_dev); + serial_register(&arm_dcc_drv); } __weak struct serial_device *default_serial_console(void) { - return NULL; + return &arm_dcc_drv; } diff --git a/drivers/serial/mxs_auart.c b/drivers/serial/mxs_auart.c new file mode 100644 index 0000000000..7cfe5bccf7 --- /dev/null +++ b/drivers/serial/mxs_auart.c @@ -0,0 +1,151 @@ +/* + * Freescale i.MX23/i.MX28 AUART driver + * + * Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com> + * + * Based on the MXC serial driver: + * + * (c) 2007 Sascha Hauer <s.hauer@pengutronix.de> + * + * Further based on the Linux mxs-auart.c driver: + * + * Freescale STMP37XX/STMP38X Application UART drkiver + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/io.h> +#include <serial.h> +#include <linux/compiler.h> +#include <asm/arch/regs-base.h> +#include <asm/arch/regs-uartapp.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_MXS_AUART_BASE +#error "CONFIG_MXS_AUART_BASE must be set to the base UART to use" +#endif + +/* AUART clock always supplied by XTAL and always 24MHz */ +#define MXS_AUART_CLK 24000000 + +static struct mxs_uartapp_regs *get_uartapp_registers(void) +{ + return (struct mxs_uartapp_regs *)CONFIG_MXS_AUART_BASE; +} + +/** + * Sets the baud rate and settings. + * The settings are: 8 data bits, no parit and 1 stop bit. + */ +void mxs_auart_setbrg(void) +{ + u32 div; + u32 linectrl = 0; + struct mxs_uartapp_regs *regs = get_uartapp_registers(); + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + /* + * From i.MX28 datasheet: + * div is calculated by calculating UARTCLK*32/baudrate, rounded to int + * div must be between 0xEC and 0x003FFFC0 inclusive + * Lowest 6 bits of div goes in BAUD_DIVFRAC part of LINECTRL register + * Next 16 bits goes in BAUD_DIVINT part of LINECTRL register + */ + div = (MXS_AUART_CLK * 32) / gd->baudrate; + if (div < 0xEC || div > 0x003FFFC0) + return; + + linectrl |= ((div & UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK) << + UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET) & + UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK; + linectrl |= ((div >> UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET) << + UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET) & + UARTAPP_LINECTRL_BAUD_DIVINT_MASK; + + /* Word length: 8 bits */ + linectrl |= UARTAPP_LINECTRL_WLEN_8BITS; + + /* Enable FIFOs. */ + linectrl |= UARTAPP_LINECTRL_FEN_MASK; + + /* Write above settings, no parity, 1 stop bit */ + writel(linectrl, ®s->hw_uartapp_linectrl); +} + +int mxs_auart_init(void) +{ + struct mxs_uartapp_regs *regs = get_uartapp_registers(); + /* Reset everything */ + mxs_reset_block(®s->hw_uartapp_ctrl0_reg); + /* Disable interrupts */ + writel(0, ®s->hw_uartapp_intr); + /* Set baud rate and settings */ + serial_setbrg(); + /* Disable RTS and CTS, ignore LINECTRL2 register */ + writel(UARTAPP_CTRL2_RTSEN_MASK | + UARTAPP_CTRL2_CTSEN_MASK | + UARTAPP_CTRL2_USE_LCR2_MASK, + ®s->hw_uartapp_ctrl2_clr); + /* Enable receiver, transmitter and UART */ + writel(UARTAPP_CTRL2_RXE_MASK | + UARTAPP_CTRL2_TXE_MASK | + UARTAPP_CTRL2_UARTEN_MASK, + ®s->hw_uartapp_ctrl2_set); + return 0; +} + +void mxs_auart_putc(const char c) +{ + struct mxs_uartapp_regs *regs = get_uartapp_registers(); + /* Wait in loop while the transmit FIFO is full */ + while (readl(®s->hw_uartapp_stat) & UARTAPP_STAT_TXFF_MASK) + ; + + writel(c, ®s->hw_uartapp_data); + + if (c == '\n') + mxs_auart_putc('\r'); +} + +int mxs_auart_tstc(void) +{ + struct mxs_uartapp_regs *regs = get_uartapp_registers(); + /* Checks if receive FIFO is empty */ + return !(readl(®s->hw_uartapp_stat) & UARTAPP_STAT_RXFE_MASK); +} + +int mxs_auart_getc(void) +{ + struct mxs_uartapp_regs *regs = get_uartapp_registers(); + /* Wait until a character is available to read */ + while (!mxs_auart_tstc()) + ; + /* Read the character from the data register */ + return readl(®s->hw_uartapp_data) & 0xFF; +} + +static struct serial_device mxs_auart_drv = { + .name = "mxs_auart_serial", + .start = mxs_auart_init, + .stop = NULL, + .setbrg = mxs_auart_setbrg, + .putc = mxs_auart_putc, + .puts = default_serial_puts, + .getc = mxs_auart_getc, + .tstc = mxs_auart_tstc, +}; + +void mxs_auart_initialize(void) +{ + serial_register(&mxs_auart_drv); +} + +__weak struct serial_device *default_serial_console(void) +{ + return &mxs_auart_drv; +} diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 67301355d7..35dc61e020 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -159,6 +159,8 @@ serial_initfunc(pl01x_serial_initialize); serial_initfunc(s3c44b0_serial_initialize); serial_initfunc(sa1100_serial_initialize); serial_initfunc(sh_serial_initialize); +serial_initfunc(arm_dcc_initialize); +serial_initfunc(mxs_auart_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -251,6 +253,8 @@ void serial_initialize(void) s3c44b0_serial_initialize(); sa1100_serial_initialize(); sh_serial_initialize(); + arm_dcc_initialize(); + mxs_auart_initialize(); serial_assign(default_serial_console()->name); } diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h index bbabb325f8..e243a8e3b2 100644 --- a/drivers/serial/usbtty.h +++ b/drivers/serial/usbtty.h @@ -22,6 +22,8 @@ #include <usb/pxa27x_udc.h> #elif defined(CONFIG_DW_UDC) #include <usb/designware_udc.h> +#elif defined(CONFIG_MV_UDC) +#include <usb/mv_udc.h> #endif #include <version.h> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 019132e853..91d24cea58 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -39,6 +39,7 @@ COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o +COBJS-$(CONFIG_ZYNQ_SPI) += zynq_spi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index a9a4d92c3e..f7192c2340 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -144,10 +144,8 @@ void spi_set_speed(struct spi_slave *slave, uint hz) u32 baud; sclk = get_sclk(); - baud = sclk / (2 * hz); /* baud should be rounded up */ - if (sclk % (2 * hz)) - baud += 1; + baud = DIV_ROUND_UP(sclk, 2 * hz); if (baud < 2) baud = 2; else if (baud > (u16)-1) diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index fc0a58be29..7c84582762 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, /* Set eSPI BRG clock source */ get_sys_info(&sysinfo); - spibrg = sysinfo.freqSystemBus / 2; + spibrg = sysinfo.freq_systembus / 2; fsl->div16 = 0; if ((spibrg / max_hz) > 32) { fsl->div16 = ESPI_CSMODE_DIV16; @@ -221,15 +221,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, slave->bus, slave->cs, *(uint *) dout, dout, *(uint *) din, din, len); - num_chunks = data_len / max_tran_len + - (data_len % max_tran_len ? 1 : 0); + num_chunks = DIV_ROUND_UP(data_len, max_tran_len); while (num_chunks--) { if (data_in) din = buffer + rx_offset; dout = buffer; tran_len = min(data_len , max_tran_len); - num_blks = (tran_len + cmd_len) / 4 + - ((tran_len + cmd_len) % 4 ? 1 : 0); + num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4); num_bytes = (tran_len + cmd_len) % 4; fsl->data_len = tran_len + cmd_len; spi_cs_activate(slave); diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index bbfc259e47..348361a7fd 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -77,7 +77,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, { volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi; unsigned int tmpdout, tmpdin, event; - int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0); + int numBlks = DIV_ROUND_UP(bitlen, 32); int tm, isRead = 0; unsigned char charSize = 32; diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c new file mode 100644 index 0000000000..5da87591ce --- /dev/null +++ b/drivers/spi/zynq_spi.c @@ -0,0 +1,280 @@ +/* + * (C) Copyright 2013 Inc. + * + * Xilinx Zynq PS SPI controller driver (master mode only) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> + +/* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */ +#define ZYNQ_SPI_CR_MSA_MASK (1 << 15) /* Manual start enb */ +#define ZYNQ_SPI_CR_MCS_MASK (1 << 14) /* Manual chip select */ +#define ZYNQ_SPI_CR_CS_MASK (0xF << 10) /* Chip select */ +#define ZYNQ_SPI_CR_BRD_MASK (0x7 << 3) /* Baud rate div */ +#define ZYNQ_SPI_CR_CPHA_MASK (1 << 2) /* Clock phase */ +#define ZYNQ_SPI_CR_CPOL_MASK (1 << 1) /* Clock polarity */ +#define ZYNQ_SPI_CR_MSTREN_MASK (1 << 0) /* Mode select */ +#define ZYNQ_SPI_IXR_RXNEMPTY_MASK (1 << 4) /* RX_FIFO_not_empty */ +#define ZYNQ_SPI_IXR_TXOW_MASK (1 << 2) /* TX_FIFO_not_full */ +#define ZYNQ_SPI_IXR_ALL_MASK 0x7F /* All IXR bits */ +#define ZYNQ_SPI_ENR_SPI_EN_MASK (1 << 0) /* SPI Enable */ + +#define ZYNQ_SPI_FIFO_DEPTH 128 +#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT +#define CONFIG_SYS_ZYNQ_SPI_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */ +#endif + +/* zynq spi register set */ +struct zynq_spi_regs { + u32 cr; /* 0x00 */ + u32 isr; /* 0x04 */ + u32 ier; /* 0x08 */ + u32 idr; /* 0x0C */ + u32 imr; /* 0x10 */ + u32 enr; /* 0x14 */ + u32 dr; /* 0x18 */ + u32 txdr; /* 0x1C */ + u32 rxdr; /* 0x20 */ +}; + +/* zynq spi slave */ +struct zynq_spi_slave { + struct spi_slave slave; + struct zynq_spi_regs *base; + u8 mode; + u8 fifo_depth; + u32 speed_hz; + u32 input_hz; + u32 req_hz; +}; + +static inline struct zynq_spi_slave *to_zynq_spi_slave(struct spi_slave *slave) +{ + return container_of(slave, struct zynq_spi_slave, slave); +} + +static inline struct zynq_spi_regs *get_zynq_spi_base(int dev) +{ + if (dev) + return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1; + else + return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0; +} + +static void zynq_spi_init_hw(struct zynq_spi_slave *zslave) +{ + u32 confr; + + /* Disable SPI */ + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + + /* Disable Interrupts */ + writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->idr); + + /* Clear RX FIFO */ + while (readl(&zslave->base->isr) & + ZYNQ_SPI_IXR_RXNEMPTY_MASK) + readl(&zslave->base->rxdr); + + /* Clear Interrupts */ + writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->isr); + + /* Manual slave select and Auto start */ + confr = ZYNQ_SPI_CR_MCS_MASK | ZYNQ_SPI_CR_CS_MASK | + ZYNQ_SPI_CR_MSTREN_MASK; + confr &= ~ZYNQ_SPI_CR_MSA_MASK; + writel(confr, &zslave->base->cr); + + /* Enable SPI */ + writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + /* 2 bus with 3 chipselect */ + return bus < 2 && cs < 3; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + u32 cr; + + debug("spi_cs_activate: 0x%08x\n", (u32)slave); + + clrbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK); + cr = readl(&zslave->base->cr); + /* + * CS cal logic: CS[13:10] + * xxx0 - cs0 + * xx01 - cs1 + * x011 - cs2 + */ + cr |= (~(0x1 << slave->cs) << 10) & ZYNQ_SPI_CR_CS_MASK; + writel(cr, &zslave->base->cr); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + + debug("spi_cs_deactivate: 0x%08x\n", (u32)slave); + + setbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK); +} + +void spi_init() +{ + /* nothing to do */ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct zynq_spi_slave *zslave; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + zslave = spi_alloc_slave(struct zynq_spi_slave, bus, cs); + if (!zslave) { + printf("SPI_error: Fail to allocate zynq_spi_slave\n"); + return NULL; + } + + zslave->base = get_zynq_spi_base(bus); + zslave->mode = mode; + zslave->fifo_depth = ZYNQ_SPI_FIFO_DEPTH; + zslave->input_hz = 166666700; + zslave->speed_hz = zslave->input_hz / 2; + zslave->req_hz = max_hz; + + /* init the zynq spi hw */ + zynq_spi_init_hw(zslave); + + return &zslave->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + + debug("spi_free_slave: 0x%08x\n", (u32)slave); + free(zslave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + u32 confr = 0; + u8 baud_rate_val = 0; + + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + + /* Set the SPI Clock phase and polarities */ + confr = readl(&zslave->base->cr); + confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK); + if (zslave->mode & SPI_CPHA) + confr |= ZYNQ_SPI_CR_CPHA_MASK; + if (zslave->mode & SPI_CPOL) + confr |= ZYNQ_SPI_CR_CPOL_MASK; + + /* Set the clock frequency */ + if (zslave->req_hz == 0) { + /* Set baudrate x8, if the req_hz is 0 */ + baud_rate_val = 0x2; + } else if (zslave->speed_hz != zslave->req_hz) { + while ((baud_rate_val < 8) && + ((zslave->input_hz / + (2 << baud_rate_val)) > zslave->req_hz)) + baud_rate_val++; + zslave->speed_hz = zslave->req_hz / (2 << baud_rate_val); + } + confr &= ~ZYNQ_SPI_CR_BRD_MASK; + confr |= (baud_rate_val << 3); + writel(confr, &zslave->base->cr); + + writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + + debug("spi_release_bus: 0x%08x\n", (u32)slave); + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + u32 len = bitlen / 8; + u32 tx_len = len, rx_len = len, tx_tvl; + const u8 *tx_buf = dout; + u8 *rx_buf = din, buf; + u32 ts, status; + + debug("spi_xfer: bus:%i cs:%i bitlen:%i len:%i flags:%lx\n", + slave->bus, slave->cs, bitlen, len, flags); + + if (bitlen == 0) + return -1; + + if (bitlen % 8) { + debug("spi_xfer: Non byte aligned SPI transfer\n"); + return -1; + } + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + while (rx_len > 0) { + /* Write the data into TX FIFO - tx threshold is fifo_depth */ + tx_tvl = 0; + while ((tx_tvl < zslave->fifo_depth) && tx_len) { + if (tx_buf) + buf = *tx_buf++; + else + buf = 0; + writel(buf, &zslave->base->txdr); + tx_len--; + tx_tvl++; + } + + /* Check TX FIFO completion */ + ts = get_timer(0); + status = readl(&zslave->base->isr); + while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) { + if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) { + printf("spi_xfer: Timeout! TX FIFO not full\n"); + return -1; + } + status = readl(&zslave->base->isr); + } + + /* Read the data from RX FIFO */ + status = readl(&zslave->base->isr); + while (status & ZYNQ_SPI_IXR_RXNEMPTY_MASK) { + buf = readl(&zslave->base->rxdr); + if (rx_buf) + *rx_buf++ = buf; + status = readl(&zslave->base->isr); + rx_len--; + } + } + + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return 0; +} diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c index b04e91cfcb..15fd9a9f78 100644 --- a/drivers/usb/eth/smsc95xx.c +++ b/drivers/usb/eth/smsc95xx.c @@ -784,6 +784,7 @@ static const struct smsc95xx_dongle smsc95xx_dongles[] = { { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */ { 0x0424, 0x9500 }, /* LAN9500 Ethernet */ { 0x0424, 0x9730 }, /* LAN9730 Ethernet (HSIC) */ + { 0x0424, 0x9900 }, /* SMSC9500 USB Ethernet Device (SAL10) */ { 0x0000, 0x0000 } /* END - Do not remove */ }; diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index 5321a689d4..37d04a1928 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -312,6 +312,8 @@ static int state_dfu_idle(struct f_dfu *f_dfu, DFU_STATE_dfuMANIFEST_WAIT_RST; to_runtime_mode(f_dfu); f_dfu->dfu_state = DFU_STATE_appIDLE; + + dfu_trigger_reset(); break; default: f_dfu->dfu_state = DFU_STATE_dfuERROR; diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 5b348d7a6e..b34068a0bb 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -6,35 +6,7 @@ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com> * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause */ diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index cbfcb2d074..a3e05a872a 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -31,8 +31,10 @@ #define STRING_MANUFACTURER 25 #define STRING_PRODUCT 2 +/* Index of String Descriptor describing this configuration */ #define STRING_USBDOWN 2 -#define CONFIG_USBDOWNLOADER 2 +/* Number of supported configurations */ +#define CONFIGURATION_NUMBER 1 #define DRIVER_VERSION "usb_dnl 2.0" @@ -54,11 +56,14 @@ static struct usb_device_descriptor device_desc = { .bNumConfigurations = 1, }; -/* static strings, in UTF-8 */ +/* + * static strings, in UTF-8 + * IDs for those strings are assigned dynamically at g_dnl_bind() + */ static struct usb_string g_dnl_string_defs[] = { - { 0, manufacturer, }, - { 1, product, }, - { } /* end of list */ + {.s = manufacturer}, + {.s = product}, + { } /* end of list */ }; static struct usb_gadget_strings g_dnl_string_tab = { @@ -104,7 +109,7 @@ static int g_dnl_config_register(struct usb_composite_dev *cdev) static struct usb_configuration config = { .label = "usb_dnload", .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bConfigurationValue = CONFIG_USBDOWNLOADER, + .bConfigurationValue = CONFIGURATION_NUMBER, .iConfiguration = STRING_USBDOWN, .bind = g_dnl_do_config, diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f038747e63..aa54b8547e 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -144,7 +144,7 @@ #define gadget_is_m66592(g) 0 #endif -#ifdef CONFIG_USB_GADGET_MV +#ifdef CONFIG_MV_UDC #define gadget_is_mv(g) (!strcmp("mv_udc", (g)->name)) #else #define gadget_is_mv(g) 0 diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/mv_udc.c index 7fa5288803..7574e31a8f 100644 --- a/drivers/usb/gadget/mv_udc.c +++ b/drivers/usb/gadget/mv_udc.c @@ -17,6 +17,20 @@ #include <linux/types.h> #include <usb/mv_udc.h> +#if CONFIG_USB_MAX_CONTROLLER_COUNT > 1 +#error This driver only supports one single controller. +#endif + +/* + * Check if the system has too long cachelines. If the cachelines are + * longer then 128b, the driver will not be able flush/invalidate data + * cache over separate QH entries. We use 128b because one QH entry is + * 64b long and there are always two QH list entries for each endpoint. + */ +#if ARCH_DMA_MINALIGN > 128 +#error This driver can not work on systems with caches longer than 128b +#endif + #ifndef DEBUG #define DBG(x...) do {} while (0) #else @@ -39,8 +53,6 @@ static const char *reqname(unsigned r) } #endif -#define PAGE_SIZE 4096 -#define QH_MAXNUM 32 static struct usb_endpoint_descriptor ep0_out_desc = { .bLength = sizeof(struct usb_endpoint_descriptor), .bDescriptorType = USB_DT_ENDPOINT, @@ -55,8 +67,6 @@ static struct usb_endpoint_descriptor ep0_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_CONTROL, }; -struct ept_queue_head *epts; -struct ept_queue_item *items[2 * NUM_ENDPOINTS]; static int mv_pullup(struct usb_gadget *gadget, int is_on); static int mv_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc); @@ -79,14 +89,115 @@ static struct usb_ep_ops mv_ep_ops = { .free_request = mv_ep_free_request, }; -static struct mv_ep ep[2 * NUM_ENDPOINTS]; +/* Init values for USB endpoints. */ +static const struct usb_ep mv_ep_init[2] = { + [0] = { /* EP 0 */ + .maxpacket = 64, + .name = "ep0", + .ops = &mv_ep_ops, + }, + [1] = { /* EP 1..n */ + .maxpacket = 512, + .name = "ep-", + .ops = &mv_ep_ops, + }, +}; + static struct mv_drv controller = { - .gadget = { - .ep0 = &ep[0].ep, - .name = "mv_udc", + .gadget = { + .name = "mv_udc", + .ops = &mv_udc_ops, }, }; +/** + * mv_get_qh() - return queue head for endpoint + * @ep_num: Endpoint number + * @dir_in: Direction of the endpoint (IN = 1, OUT = 0) + * + * This function returns the QH associated with particular endpoint + * and it's direction. + */ +static struct ept_queue_head *mv_get_qh(int ep_num, int dir_in) +{ + return &controller.epts[(ep_num * 2) + dir_in]; +} + +/** + * mv_get_qtd() - return queue item for endpoint + * @ep_num: Endpoint number + * @dir_in: Direction of the endpoint (IN = 1, OUT = 0) + * + * This function returns the QH associated with particular endpoint + * and it's direction. + */ +static struct ept_queue_item *mv_get_qtd(int ep_num, int dir_in) +{ + return controller.items[(ep_num * 2) + dir_in]; +} + +/** + * mv_flush_qh - flush cache over queue head + * @ep_num: Endpoint number + * + * This function flushes cache over QH for particular endpoint. + */ +static void mv_flush_qh(int ep_num) +{ + struct ept_queue_head *head = mv_get_qh(ep_num, 0); + const uint32_t start = (uint32_t)head; + const uint32_t end = start + 2 * sizeof(*head); + + flush_dcache_range(start, end); +} + +/** + * mv_invalidate_qh - invalidate cache over queue head + * @ep_num: Endpoint number + * + * This function invalidates cache over QH for particular endpoint. + */ +static void mv_invalidate_qh(int ep_num) +{ + struct ept_queue_head *head = mv_get_qh(ep_num, 0); + uint32_t start = (uint32_t)head; + uint32_t end = start + 2 * sizeof(*head); + + invalidate_dcache_range(start, end); +} + +/** + * mv_flush_qtd - flush cache over queue item + * @ep_num: Endpoint number + * + * This function flushes cache over qTD pair for particular endpoint. + */ +static void mv_flush_qtd(int ep_num) +{ + struct ept_queue_item *item = mv_get_qtd(ep_num, 0); + const uint32_t start = (uint32_t)item; + const uint32_t end_raw = start + 2 * sizeof(*item); + const uint32_t end = roundup(end_raw, ARCH_DMA_MINALIGN); + + flush_dcache_range(start, end); +} + +/** + * mv_invalidate_qtd - invalidate cache over queue item + * @ep_num: Endpoint number + * + * This function invalidates cache over qTD pair for particular endpoint. + */ +static void mv_invalidate_qtd(int ep_num) +{ + struct ept_queue_item *item = mv_get_qtd(ep_num, 0); + const uint32_t start = (uint32_t)item; + const uint32_t end_raw = start + 2 * sizeof(*item); + const uint32_t end = roundup(end_raw, ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + static struct usb_request * mv_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags) { @@ -102,9 +213,9 @@ static void mv_ep_free_request(struct usb_ep *ep, struct usb_request *_req) static void ep_enable(int num, int in) { struct ept_queue_head *head; - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; unsigned n; - head = epts + 2*num + in; + head = mv_get_qh(num, in); n = readl(&udc->epctrl[num]); if (in) @@ -112,8 +223,10 @@ static void ep_enable(int num, int in) else n |= (CTRL_RXE | CTRL_RXR | CTRL_RXT_BULK); - if (num != 0) + if (num != 0) { head->config = CONFIG_MAX_PKT(EP_MAX_PACKET_SIZE) | CONFIG_ZLT; + mv_flush_qh(num); + } writel(n, &udc->epctrl[num]); } @@ -134,40 +247,108 @@ static int mv_ep_disable(struct usb_ep *ep) return 0; } +static int mv_bounce(struct mv_ep *ep) +{ + uint32_t addr = (uint32_t)ep->req.buf; + uint32_t ba; + + /* Input buffer address is not aligned. */ + if (addr & (ARCH_DMA_MINALIGN - 1)) + goto align; + + /* Input buffer length is not aligned. */ + if (ep->req.length & (ARCH_DMA_MINALIGN - 1)) + goto align; + + /* The buffer is well aligned, only flush cache. */ + ep->b_len = ep->req.length; + ep->b_buf = ep->req.buf; + goto flush; + +align: + /* Use internal buffer for small payloads. */ + if (ep->req.length <= 64) { + ep->b_len = 64; + ep->b_buf = ep->b_fast; + } else { + ep->b_len = roundup(ep->req.length, ARCH_DMA_MINALIGN); + ep->b_buf = memalign(ARCH_DMA_MINALIGN, ep->b_len); + if (!ep->b_buf) + return -ENOMEM; + } + + memcpy(ep->b_buf, ep->req.buf, ep->req.length); + +flush: + ba = (uint32_t)ep->b_buf; + flush_dcache_range(ba, ba + ep->b_len); + + return 0; +} + +static void mv_debounce(struct mv_ep *ep) +{ + uint32_t addr = (uint32_t)ep->req.buf; + uint32_t ba = (uint32_t)ep->b_buf; + + invalidate_dcache_range(ba, ba + ep->b_len); + + /* Input buffer address is not aligned. */ + if (addr & (ARCH_DMA_MINALIGN - 1)) + goto copy; + + /* Input buffer length is not aligned. */ + if (ep->req.length & (ARCH_DMA_MINALIGN - 1)) + goto copy; + + /* The buffer is well aligned, only invalidate cache. */ + return; + +copy: + memcpy(ep->req.buf, ep->b_buf, ep->req.length); + + /* Large payloads use allocated buffer, free it. */ + if (ep->req.length > 64) + free(ep->b_buf); +} + static int mv_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { struct mv_ep *mv_ep = container_of(ep, struct mv_ep, ep); - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; struct ept_queue_item *item; struct ept_queue_head *head; - unsigned phys; - int bit, num, len, in; + int bit, num, len, in, ret; num = mv_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; in = (mv_ep->desc->bEndpointAddress & USB_DIR_IN) != 0; - item = items[2 * num + in]; - head = epts + 2 * num + in; - phys = (unsigned)req->buf; + item = mv_get_qtd(num, in); + head = mv_get_qh(num, in); len = req->length; + ret = mv_bounce(mv_ep); + if (ret) + return ret; + item->next = TERMINATE; item->info = INFO_BYTES(len) | INFO_IOC | INFO_ACTIVE; - item->page0 = phys; - item->page1 = (phys & 0xfffff000) + 0x1000; + item->page0 = (uint32_t)mv_ep->b_buf; + item->page1 = ((uint32_t)mv_ep->b_buf & 0xfffff000) + 0x1000; head->next = (unsigned) item; head->info = 0; - DBG("ept%d %s queue len %x, buffer %x\n", - num, in ? "in" : "out", len, phys); + DBG("ept%d %s queue len %x, buffer %p\n", + num, in ? "in" : "out", len, mv_ep->b_buf); if (in) bit = EPT_TX(num); else bit = EPT_RX(num); - flush_cache(phys, len); - flush_cache((unsigned long)item, sizeof(struct ept_queue_item)); + mv_flush_qh(num); + mv_flush_qtd(num); + writel(bit, &udc->epprime); return 0; @@ -181,13 +362,17 @@ static void handle_ep_complete(struct mv_ep *ep) in = (ep->desc->bEndpointAddress & USB_DIR_IN) != 0; if (num == 0) ep->desc = &ep0_out_desc; - item = items[2 * num + in]; - + item = mv_get_qtd(num, in); + mv_invalidate_qtd(num); + if (item->info & 0xff) printf("EP%d/%s FAIL nfo=%x pg0=%x\n", num, in ? "in" : "out", item->info, item->page0); len = (item->info >> 16) & 0x7fff; + + mv_debounce(ep); + ep->req.length -= len; DBG("ept%d %s complete %x\n", num, in ? "in" : "out", len); @@ -203,16 +388,16 @@ static void handle_ep_complete(struct mv_ep *ep) static void handle_setup(void) { - struct usb_request *req = &ep[0].req; - struct mv_udc *udc = controller.udc; + struct usb_request *req = &controller.ep[0].req; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; struct ept_queue_head *head; struct usb_ctrlrequest r; int status = 0; int num, in, _num, _in, i; char *buf; - head = epts; + head = mv_get_qh(0, 0); /* EP0 OUT */ - flush_cache((unsigned long)head, sizeof(struct ept_queue_head)); + mv_invalidate_qh(0); memcpy(&r, head->setup_data, sizeof(struct usb_ctrlrequest)); writel(EPT_RX(0), &udc->epstat); DBG("handle setup %s, %x, %x index %x value %x\n", reqname(r.bRequest), @@ -226,11 +411,11 @@ static void handle_setup(void) if ((r.wValue == 0) && (r.wLength == 0)) { req->length = 0; for (i = 0; i < NUM_ENDPOINTS; i++) { - if (!ep[i].desc) + if (!controller.ep[i].desc) continue; - num = ep[i].desc->bEndpointAddress - & USB_ENDPOINT_NUMBER_MASK; - in = (ep[i].desc->bEndpointAddress + num = controller.ep[i].desc->bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK; + in = (controller.ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; if ((num == _num) && (in == _in)) { ep_enable(num, in); @@ -277,7 +462,7 @@ static void stop_activity(void) { int i, num, in; struct ept_queue_head *head; - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; writel(readl(&udc->epcomp), &udc->epcomp); writel(readl(&udc->epstat), &udc->epstat); writel(0xffffffff, &udc->epflush); @@ -286,19 +471,21 @@ static void stop_activity(void) for (i = 0; i < NUM_ENDPOINTS; i++) { if (i != 0) writel(0, &udc->epctrl[i]); - if (ep[i].desc) { - num = ep[i].desc->bEndpointAddress + if (controller.ep[i].desc) { + num = controller.ep[i].desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - in = (ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; - head = epts + (num * 2) + (in); + in = (controller.ep[i].desc->bEndpointAddress + & USB_DIR_IN) != 0; + head = mv_get_qh(num, in); head->info = INFO_ACTIVE; + mv_flush_qh(num); } } } void udc_irq(void) { - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; unsigned n = readl(&udc->usbsts); writel(n, &udc->usbsts); int bit, i, num, in; @@ -320,8 +507,8 @@ void udc_irq(void) if (bit == 2) { controller.gadget.speed = USB_SPEED_HIGH; for (i = 1; i < NUM_ENDPOINTS && n; i++) - if (ep[i].desc) - ep[i].ep.maxpacket = 512; + if (controller.ep[i].desc) + controller.ep[i].ep.maxpacket = 512; } else { controller.gadget.speed = USB_SPEED_FULL; } @@ -340,14 +527,14 @@ void udc_irq(void) writel(n, &udc->epcomp); for (i = 0; i < NUM_ENDPOINTS && n; i++) { - if (ep[i].desc) { - num = ep[i].desc->bEndpointAddress + if (controller.ep[i].desc) { + num = controller.ep[i].desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - in = (ep[i].desc->bEndpointAddress + in = (controller.ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; bit = (in) ? EPT_TX(num) : EPT_RX(num); if (n & bit) - handle_ep_complete(&ep[i]); + handle_ep_complete(&controller.ep[i]); } } } @@ -356,7 +543,7 @@ void udc_irq(void) int usb_gadget_handle_interrupts(void) { u32 value; - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; value = readl(&udc->usbsts); if (value) @@ -367,13 +554,13 @@ int usb_gadget_handle_interrupts(void) static int mv_pullup(struct usb_gadget *gadget, int is_on) { - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; if (is_on) { /* RESET */ writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd); udelay(200); - writel((unsigned) epts, &udc->epinitaddr); + writel((unsigned)controller.epts, &udc->epinitaddr); /* select DEVICE mode */ writel(USBMODE_DEVICE, &udc->usbmode); @@ -395,7 +582,7 @@ static int mv_pullup(struct usb_gadget *gadget, int is_on) void udc_disconnect(void) { - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; /* disable pullup */ stop_activity(); writel(USBCMD_FS2, &udc->usbcmd); @@ -407,18 +594,48 @@ void udc_disconnect(void) static int mvudc_probe(void) { struct ept_queue_head *head; + uint8_t *imem; int i; - controller.gadget.ops = &mv_udc_ops; - controller.udc = (struct mv_udc *)CONFIG_USB_REG_BASE; - epts = memalign(PAGE_SIZE, QH_MAXNUM * sizeof(struct ept_queue_head)); - memset(epts, 0, QH_MAXNUM * sizeof(struct ept_queue_head)); + const int num = 2 * NUM_ENDPOINTS; + + const int eplist_min_align = 4096; + const int eplist_align = roundup(eplist_min_align, ARCH_DMA_MINALIGN); + const int eplist_raw_sz = num * sizeof(struct ept_queue_head); + const int eplist_sz = roundup(eplist_raw_sz, ARCH_DMA_MINALIGN); + + const int ilist_align = roundup(ARCH_DMA_MINALIGN, 32); + const int ilist_ent_raw_sz = 2 * sizeof(struct ept_queue_item); + const int ilist_ent_sz = roundup(ilist_ent_raw_sz, ARCH_DMA_MINALIGN); + const int ilist_sz = NUM_ENDPOINTS * ilist_ent_sz; + + /* The QH list must be aligned to 4096 bytes. */ + controller.epts = memalign(eplist_align, eplist_sz); + if (!controller.epts) + return -ENOMEM; + memset(controller.epts, 0, eplist_sz); + + /* + * Each qTD item must be 32-byte aligned, each qTD touple must be + * cacheline aligned. There are two qTD items for each endpoint and + * only one of them is used for the endpoint at time, so we can group + * them together. + */ + controller.items_mem = memalign(ilist_align, ilist_sz); + if (!controller.items_mem) { + free(controller.epts); + return -ENOMEM; + } + for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { /* - * For item0 and item1, they are served as ep0 - * out&in seperately + * Configure QH for each endpoint. The structure of the QH list + * is such that each two subsequent fields, N and N+1 where N is + * even, in the QH list represent QH for one endpoint. The Nth + * entry represents OUT configuration and the N+1th entry does + * represent IN configuration of the endpoint. */ - head = epts + i; + head = controller.epts + i; if (i < 2) head->config = CONFIG_MAX_PKT(EP0_MAX_PACKET_SIZE) | CONFIG_ZLT | CONFIG_IOS; @@ -428,49 +645,65 @@ static int mvudc_probe(void) head->next = TERMINATE; head->info = 0; - items[i] = memalign(PAGE_SIZE, sizeof(struct ept_queue_item)); + imem = controller.items_mem + ((i >> 1) * ilist_ent_sz); + if (i & 1) + imem += sizeof(struct ept_queue_item); + + controller.items[i] = (struct ept_queue_item *)imem; + + if (i & 1) { + mv_flush_qh(i - 1); + mv_flush_qtd(i - 1); + } } INIT_LIST_HEAD(&controller.gadget.ep_list); - ep[0].ep.maxpacket = 64; - ep[0].ep.name = "ep0"; - ep[0].desc = &ep0_in_desc; + + /* Init EP 0 */ + memcpy(&controller.ep[0].ep, &mv_ep_init[0], sizeof(*mv_ep_init)); + controller.ep[0].desc = &ep0_in_desc; + controller.gadget.ep0 = &controller.ep[0].ep; INIT_LIST_HEAD(&controller.gadget.ep0->ep_list); - for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { - if (i != 0) { - ep[i].ep.maxpacket = 512; - ep[i].ep.name = "ep-"; - list_add_tail(&ep[i].ep.ep_list, - &controller.gadget.ep_list); - ep[i].desc = NULL; - } - ep[i].ep.ops = &mv_ep_ops; + + /* Init EP 1..n */ + for (i = 1; i < NUM_ENDPOINTS; i++) { + memcpy(&controller.ep[i].ep, &mv_ep_init[1], + sizeof(*mv_ep_init)); + list_add_tail(&controller.ep[i].ep.ep_list, + &controller.gadget.ep_list); } + return 0; } int usb_gadget_register_driver(struct usb_gadget_driver *driver) { - struct mv_udc *udc = controller.udc; - int retval; - - if (!driver - || driver->speed < USB_SPEED_FULL - || !driver->bind - || !driver->setup) { - DBG("bad parameter.\n"); + struct mv_udc *udc; + int ret; + + if (!driver) return -EINVAL; - } + if (!driver->bind || !driver->setup || !driver->disconnect) + return -EINVAL; + if (driver->speed != USB_SPEED_FULL && driver->speed != USB_SPEED_HIGH) + return -EINVAL; + + ret = usb_lowlevel_init(0, (void **)&controller.ctrl); + if (ret) + return ret; + + ret = mvudc_probe(); + if (!ret) { + udc = (struct mv_udc *)controller.ctrl->hcor; - if (!mvudc_probe()) { - usb_lowlevel_init(); /* select ULPI phy */ writel(PTS(PTS_ENABLE) | PFSC, &udc->portsc); } - retval = driver->bind(&controller.gadget); - if (retval) { - DBG("driver->bind() returned %d\n", retval); - return retval; + + ret = driver->bind(&controller.gadget); + if (ret) { + DBG("driver->bind() returned %d\n", ret); + return ret; } controller.driver = driver; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 706cf0cb7d..fdad739724 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -36,16 +36,7 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif -static struct ehci_ctrl { - struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ - struct ehci_hcor *hcor; - int rootdev; - uint16_t portreset; - struct QH qh_list __aligned(USB_DMA_MINALIGN); - struct QH periodic_queue __aligned(USB_DMA_MINALIGN); - uint32_t *periodic_list; - int ntds; -} ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; +static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; #define ALIGN_END_ADDR(type, ptr, size) \ ((uint32_t)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN)) @@ -954,7 +945,9 @@ int usb_lowlevel_init(int index, void **controller) * Split Transactions will be spread across microframes using * S-mask and C-mask. */ - ehcic[index].periodic_list = memalign(4096, 1024*4); + if (ehcic[index].periodic_list == NULL) + ehcic[index].periodic_list = memalign(4096, 1024 * 4); + if (!ehcic[index].periodic_list) return -ENOMEM; for (i = 0; i < 1024; i++) { diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c index 3548620eca..dd11f535ad 100644 --- a/drivers/usb/host/ehci-mx5.c +++ b/drivers/usb/host/ehci-mx5.c @@ -221,21 +221,12 @@ void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { struct usb_ehci *ehci; -#ifdef CONFIG_MX53 - struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR; - u32 reg; - - reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26); - /* derive USB PHY clock multiplexer from PLL3 */ - reg |= 1 << 26; - __raw_writel(reg, &sc_regs->cscmr1); -#endif set_usboh3_clk(); - enable_usboh3_clk(1); + enable_usboh3_clk(true); set_usb_phy_clk(); - enable_usb_phy1_clk(1); - enable_usb_phy2_clk(1); + enable_usb_phy1_clk(true); + enable_usb_phy2_clk(true); mdelay(1); /* Do board specific initialization */ diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index a47e078f62..3c58f9e656 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -28,18 +28,21 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE; static int omap_uhh_reset(void) { - unsigned long init = get_timer(0); - - /* perform UHH soft reset, and wait until reset is complete */ - writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc); - - /* Wait for UHH reset to complete */ - while (!(readl(&uhh->syss) & OMAP_UHH_SYSSTATUS_EHCI_RESETDONE)) - if (get_timer(init) > CONFIG_SYS_HZ) { - debug("OMAP UHH error: timeout resetting ehci\n"); - return -EL3RST; - } - +/* + * Soft resetting the UHH module causes instability issues on + * all OMAPs so we just avoid it. + * + * See OMAP36xx Errata + * i571: USB host EHCI may stall when entering smart-standby mode + * i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * + * On OMAP4/5, soft-resetting the UHH module will put it into + * Smart-Idle mode and lead to a deadlock. + * + * On OMAP3, this doesn't seem to be the case but still instabilities + * are observed on beagle (3530 ES1.0) if soft-reset is used. + * e.g. NFS root failures with Linux kernel. + */ return 0; } @@ -76,6 +79,7 @@ static void omap_usbhs_hsic_init(int port) writel(reg, &usbtll->channel_conf + port); } +#ifdef CONFIG_USB_ULPI static void omap_ehci_soft_phy_reset(int port) { struct ulpi_viewport ulpi_vp; @@ -85,6 +89,12 @@ static void omap_ehci_soft_phy_reset(int port) ulpi_reset(&ulpi_vp); } +#else +static void omap_ehci_soft_phy_reset(int port) +{ + return; +} +#endif inline int __board_usb_init(void) { @@ -93,7 +103,8 @@ inline int __board_usb_init(void) int board_usb_init(void) __attribute__((weak, alias("__board_usb_init"))); #if defined(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO) || \ - defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO) + defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO) || \ + defined(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO) /* controls PHY(s) reset signal(s) */ static inline void omap_ehci_phy_reset(int on, int delay) { @@ -112,6 +123,10 @@ static inline void omap_ehci_phy_reset(int on, int delay) gpio_request(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, "USB PHY2 reset"); gpio_direction_output(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, !on); #endif +#ifdef CONFIG_OMAP_EHCI_PHY3_RESET_GPIO + gpio_request(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, "USB PHY3 reset"); + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, !on); +#endif /* Hold the PHY in RESET for enough time till DIR is high */ /* Refer: ISSUE1 */ @@ -195,10 +210,27 @@ int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata, else setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); } else if (rev == OMAP_USBHS_REV2) { + clrsetbits_le32(®, (OMAP_P1_MODE_CLEAR | OMAP_P2_MODE_CLEAR), OMAP4_UHH_HOSTCONFIG_APP_START_CLK); - /* Clear port mode fields for PHY mode*/ + /* Clear port mode fields for PHY mode */ + + if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0])) + setbits_le32(®, OMAP_P1_MODE_HSIC); + + if (is_ehci_hsic_mode(usbhs_pdata->port_mode[1])) + setbits_le32(®, OMAP_P2_MODE_HSIC); + + } else if (rev == OMAP_USBHS_REV2_1) { + + clrsetbits_le32(®, + (OMAP_P1_MODE_CLEAR | + OMAP_P2_MODE_CLEAR | + OMAP_P3_MODE_CLEAR), + OMAP4_UHH_HOSTCONFIG_APP_START_CLK); + + /* Clear port mode fields for PHY mode */ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0])) setbits_le32(®, OMAP_P1_MODE_HSIC); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index d090f0a53e..bd52afe262 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -22,6 +22,8 @@ #ifndef USB_EHCI_H #define USB_EHCI_H +#include <usb.h> + #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #endif @@ -252,6 +254,17 @@ struct QH { }; }; +struct ehci_ctrl { + struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ + struct ehci_hcor *hcor; + int rootdev; + uint16_t portreset; + struct QH qh_list __aligned(USB_DMA_MINALIGN); + struct QH periodic_queue __aligned(USB_DMA_MINALIGN); + uint32_t *periodic_list; + int ntds; +}; + /* Low level init functions */ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor); int ehci_hcd_stop(int index); diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h index 72c8c2bad1..d7a5663deb 100644 --- a/drivers/usb/musb-new/linux-compat.h +++ b/drivers/usb/musb-new/linux-compat.h @@ -39,15 +39,6 @@ typedef unsigned long dmaaddr_t; #define cpu_relax() do {} while (0) #define pr_debug(fmt, args...) debug(fmt, ##args) -#define dev_dbg(dev, fmt, args...) \ - debug(fmt, ##args) -#define dev_vdbg(dev, fmt, args...) \ - debug(fmt, ##args) -#define dev_info(dev, fmt, args...) \ - printf(fmt, ##args) -#define dev_err(dev, fmt, args...) \ - printf(fmt, ##args) -#define printk printf #define WARN(condition, fmt, args...) ({ \ int ret_warn = !!condition; \ @@ -55,13 +46,6 @@ typedef unsigned long dmaaddr_t; printf(fmt, ##args); \ ret_warn; }) -#define KERN_DEBUG -#define KERN_NOTICE -#define KERN_WARNING -#define KERN_ERR - -#define kfree(ptr) free(ptr) - #define pm_runtime_get_sync(dev) do {} while (0) #define pm_runtime_put(dev) do {} while (0) #define pm_runtime_put_sync(dev) do {} while (0) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index f1fb26c180..6c208c596e 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -19,6 +19,7 @@ COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o +COBJS-$(CONFIG_L5F31188) += l5f31188.o COBJS-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o COBJS-$(CONFIG_PXA_LCD) += pxa_lcd.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o @@ -40,6 +41,7 @@ COBJS-$(CONFIG_VIDEO_SM501) += sm501.o COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o COBJS-$(CONFIG_VIDEO_TEGRA) += tegra.o COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o +COBJS-$(CONFIG_FORMIKE) += formike.o COBJS := $(sort $(COBJS-y)) SRCS := $(COBJS:.o=.c) diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 96ef8f9c26..fd2885573c 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -197,7 +197,6 @@ #include <linux/types.h> #include <stdio_dev.h> #include <video_font.h> -#include <video_font_data.h> #if defined(CONFIG_CMD_DATE) #include <rtc.h> @@ -431,6 +430,16 @@ static const int video_font_draw_table32[16][4] = { {0x00ffffff, 0x00ffffff, 0x00ffffff, 0x00ffffff} }; +/* + * Implement a weak default function for boards that optionally + * need to skip the cfb initialization. + */ +__weak int board_cfb_skip(void) +{ + /* As default, don't skip cfb init */ + return 0; +} + static void video_drawchars(int xx, int yy, unsigned char *s, int count) { u8 *cdat, *dest, *dest0; @@ -452,6 +461,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[0] = (video_font_draw_table8[bits >> 4] & eorx) ^ bgx; + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[1] = (video_font_draw_table8[bits & 15] & eorx) ^ bgx; @@ -477,6 +490,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) SHORTSWAP32((video_font_draw_table15 [bits >> 4 & 3] & eorx) ^ bgx); + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[2] = SHORTSWAP32((video_font_draw_table15 [bits >> 2 & 3] & eorx) ^ @@ -507,6 +524,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) SHORTSWAP32((video_font_draw_table16 [bits >> 4 & 3] & eorx) ^ bgx); + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[2] = SHORTSWAP32((video_font_draw_table16 [bits >> 2 & 3] & eorx) ^ @@ -541,6 +562,11 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[3] = SWAP32((video_font_draw_table32 [bits >> 4][3] & eorx) ^ bgx); + + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[4] = SWAP32((video_font_draw_table32 [bits & 15][0] & eorx) ^ bgx); @@ -576,6 +602,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[2] = (video_font_draw_table24[bits >> 4][2] & eorx) ^ bgx; + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[3] = (video_font_draw_table24[bits & 15][0] & eorx) ^ bgx; @@ -1996,6 +2026,8 @@ static void *video_logo(void) return video_fb_address + video_logo_height * VIDEO_LINE_LEN; } #endif + if (board_cfb_skip()) + return 0; sprintf(info, " %s", version_string); @@ -2205,6 +2237,9 @@ int drv_video_init(void) /* Init video chip - returns with framebuffer cleared */ skip_dev_init = (video_init() == -1); + if (board_cfb_skip()) + return 0; + #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE) debug("KBD: Keyboard init ...\n"); skip_dev_init |= (VIDEO_KBD_INIT_FCT == -1); diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 373991ddee..3a5f325cd3 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -24,10 +24,17 @@ #include <asm/arch/hardware.h> #include "videomodes.h" -#include <asm/arch/da8xx-fb.h> +#include "da8xx-fb.h" + +#if !defined(DA8XX_LCD_CNTL_BASE) +#define DA8XX_LCD_CNTL_BASE DAVINCI_LCD_CNTL_BASE +#endif #define DRIVER_NAME "da8xx_lcdc" +#define LCD_VERSION_1 1 +#define LCD_VERSION_2 2 + /* LCD Status Register */ #define LCD_END_OF_FRAME1 (1 << 9) #define LCD_END_OF_FRAME0 (1 << 8) @@ -42,9 +49,14 @@ #define LCD_DMA_BURST_4 0x2 #define LCD_DMA_BURST_8 0x3 #define LCD_DMA_BURST_16 0x4 -#define LCD_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_V1_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_V2_END_OF_FRAME0_INT_ENA (1 << 8) +#define LCD_V2_END_OF_FRAME1_INT_ENA (1 << 9) #define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0) +#define LCD_V2_TFT_24BPP_MODE (1 << 25) +#define LCD_V2_TFT_24BPP_UNPACK (1 << 26) + /* LCD Control Register */ #define LCD_CLK_DIVISOR(x) ((x) << 8) #define LCD_RASTER_MODE 0x01 @@ -58,12 +70,20 @@ #define LCD_MONO_8BIT_MODE (1 << 9) #define LCD_RASTER_ORDER (1 << 8) #define LCD_TFT_MODE (1 << 7) -#define LCD_UNDERFLOW_INT_ENA (1 << 6) -#define LCD_PL_ENABLE (1 << 4) +#define LCD_V1_UNDERFLOW_INT_ENA (1 << 6) +#define LCD_V2_UNDERFLOW_INT_ENA (1 << 5) +#define LCD_V1_PL_INT_ENA (1 << 4) +#define LCD_V2_PL_INT_ENA (1 << 6) #define LCD_MONOCHROME_MODE (1 << 1) #define LCD_RASTER_ENABLE (1 << 0) #define LCD_TFT_ALT_ENABLE (1 << 23) #define LCD_STN_565_ENABLE (1 << 24) +#define LCD_V2_DMA_CLK_EN (1 << 2) +#define LCD_V2_LIDD_CLK_EN (1 << 1) +#define LCD_V2_CORE_CLK_EN (1 << 0) +#define LCD_V2_LPP_B10 26 +#define LCD_V2_TFT_24BPP_MODE (1 << 25) +#define LCD_V2_TFT_24BPP_UNPACK (1 << 26) /* LCD Raster Timing 2 Register */ #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) @@ -74,6 +94,8 @@ #define LCD_INVERT_LINE_CLOCK (1 << 21) #define LCD_INVERT_FRAME_CLOCK (1 << 20) +/* Clock registers available only on Version 2 */ +#define LCD_CLK_MAIN_RESET (1 << 3) /* LCD Block */ struct da8xx_lcd_regs { u32 revid; @@ -97,6 +119,15 @@ struct da8xx_lcd_regs { u32 dma_frm_buf_ceiling_addr_0; u32 dma_frm_buf_base_addr_1; u32 dma_frm_buf_ceiling_addr_1; + u32 resv1; + u32 raw_stat; + u32 masked_stat; + u32 int_ena_set; + u32 int_ena_clr; + u32 end_of_int_ind; + /* Clock registers available only on Version 2 */ + u32 clk_ena; + u32 clk_reset; }; #define LCD_NUM_BUFFERS 1 @@ -107,6 +138,8 @@ struct da8xx_lcd_regs { #define RIGHT_MARGIN 64 #define UPPER_MARGIN 32 #define LOWER_MARGIN 32 +#define WAIT_FOR_FRAME_DONE true +#define NO_WAIT_FOR_FRAME_DONE false #define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP) @@ -119,6 +152,8 @@ static GraphicDevice gpanel; static const struct da8xx_panel *lcd_panel; static struct fb_info *da8xx_fb_info; static int bits_x_pixel; +static unsigned int lcd_revision; +const struct lcd_ctrl_config *da8xx_lcd_cfg; static inline unsigned int lcdc_read(u32 *addr) { @@ -179,35 +214,24 @@ static struct fb_fix_screeninfo da8xx_fb_fix = { .accel = FB_ACCEL_NONE }; -static const struct display_panel disp_panel = { - QVGA, - 16, - 16, - COLOR_ACTIVE, -}; - -static const struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias = 255, - .ac_bias_intrpt = 0, - .dma_burst_sz = 16, - .bpp = 16, - .fdd = 255, - .tft_alt_mode = 0, - .stn_565_mode = 0, - .mono_8bit_mode = 0, - .invert_line_clock = 1, - .invert_frm_clock = 1, - .sync_edge = 0, - .sync_ctrl = 1, - .raster_order = 0, -}; - /* Enable the Raster Engine of the LCD Controller */ static inline void lcd_enable_raster(void) { u32 reg; + /* Put LCDC in reset for several cycles */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_CLK_MAIN_RESET, + &da8xx_fb_reg_base->clk_reset); + + udelay(1000); + /* Bring LCDC out of reset */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(0, + &da8xx_fb_reg_base->clk_reset); + + udelay(1000); + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); if (!(reg & LCD_RASTER_ENABLE)) lcdc_write(reg | LCD_RASTER_ENABLE, @@ -215,14 +239,40 @@ static inline void lcd_enable_raster(void) } /* Disable the Raster Engine of the LCD Controller */ -static inline void lcd_disable_raster(void) +static inline void lcd_disable_raster(bool wait_for_frame_done) { u32 reg; + u32 loop_cnt = 0; + u32 stat; + u32 i = 0; + + if (wait_for_frame_done) + loop_cnt = 5000; reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); if (reg & LCD_RASTER_ENABLE) lcdc_write(reg & ~LCD_RASTER_ENABLE, &da8xx_fb_reg_base->raster_ctrl); + + /* Wait for the current frame to complete */ + do { + if (lcd_revision == LCD_VERSION_1) + stat = lcdc_read(&da8xx_fb_reg_base->stat); + else + stat = lcdc_read(&da8xx_fb_reg_base->raw_stat); + + mdelay(1); + } while (!(stat & 0x01) && (i++ < loop_cnt)); + + if (lcd_revision == LCD_VERSION_1) + lcdc_write(stat, &da8xx_fb_reg_base->stat); + else + lcdc_write(stat, &da8xx_fb_reg_base->raw_stat); + + if ((loop_cnt != 0) && (i >= loop_cnt)) { + printf("LCD Controller timed out\n"); + return; + } } static void lcd_blit(int load_mode, struct da8xx_fb_par *par) @@ -231,6 +281,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) u32 end; u32 reg_ras; u32 reg_dma; + u32 reg_int; /* init reg to clear PLM (loading mode) fields */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); @@ -243,7 +294,15 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) end = par->dma_end; reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); - reg_dma |= LCD_END_OF_FRAME_INT_ENA; + if (lcd_revision == LCD_VERSION_1) { + reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_END_OF_FRAME0_INT_ENA | + LCD_V2_END_OF_FRAME1_INT_ENA | + LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } #if (LCD_NUM_BUFFERS == 2) reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; @@ -264,7 +323,13 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) end = start + par->palette_sz - 1; reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); - reg_ras |= LCD_PL_ENABLE; + if (lcd_revision == LCD_VERSION_1) { + reg_ras |= LCD_V1_PL_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_PL_INT_ENA; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); @@ -348,6 +413,7 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) { u32 reg; + u32 reg_int; reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE | LCD_MONO_8BIT_MODE | @@ -375,7 +441,13 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) } /* enable additional interrupts here */ - reg |= LCD_UNDERFLOW_INT_ENA; + if (lcd_revision == LCD_VERSION_1) { + reg |= LCD_V1_UNDERFLOW_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_UNDERFLOW_INT_ENA; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); @@ -413,22 +485,53 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, /* Set the Panel Width */ /* Pixels per line = (PPL + 1)*16 */ - /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ - width &= 0x3f0; + if (lcd_revision == LCD_VERSION_1) { + /* + * 0x3F in bits 4..9 gives max horisontal resolution = 1024 + * pixels + */ + width &= 0x3f0; + } else { + /* + * 0x7F in bits 4..10 gives max horizontal resolution = 2048 + * pixels. + */ + width &= 0x7f0; + } reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0); reg &= 0xfffffc00; - reg |= ((width >> 4) - 1) << 4; + if (lcd_revision == LCD_VERSION_1) { + reg |= ((width >> 4) - 1) << 4; + } else { + width = (width >> 4) - 1; + reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3); + } lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); /* Set the Panel Height */ + /* Set bits 9:0 of Lines Per Pixel */ reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1); reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); + /* Set bit 10 of Lines Per Pixel */ + if (lcd_revision == LCD_VERSION_2) { + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); + reg |= ((height - 1) & 0x400) << 16; + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); + } + /* Set the Raster Order of the Frame Buffer */ reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8); if (raster_order) reg |= LCD_RASTER_ORDER; + + if (bpp == 24) + reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE); + else if (bpp == 32) + reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE + | LCD_V2_TFT_24BPP_UNPACK); + lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); switch (bpp) { @@ -436,6 +539,8 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, case 2: case 4: case 16: + case 24: + case 32: par->palette_sz = 16 * 2; break; @@ -494,6 +599,23 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, update_hw = 1; palette[0] = 0x4000; } + } else if (((info->var.bits_per_pixel == 32) && regno < 32) || + ((info->var.bits_per_pixel == 24) && regno < 24)) { + red >>= (24 - info->var.red.length); + red <<= info->var.red.offset; + + green >>= (24 - info->var.green.length); + green <<= info->var.green.offset; + + blue >>= (24 - info->var.blue.length); + blue <<= info->var.blue.offset; + + par->pseudo_palette[regno] = red | green | blue; + + if (palette[0] != 0x4000) { + update_hw = 1; + palette[0] = 0x4000; + } } /* Update the palette in the h/w as needed. */ @@ -506,11 +628,18 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, static void lcd_reset(struct da8xx_fb_par *par) { /* Disable the Raster if previously Enabled */ - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); /* DMA has to be disabled */ lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl); lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl); + + if (lcd_revision == LCD_VERSION_2) { + lcdc_write(0, &da8xx_fb_reg_base->int_ena_set); + /* Write 1 to reset */ + lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset); + lcdc_write(0, &da8xx_fb_reg_base->clk_reset); + } } static void lcd_calc_clk_divider(struct da8xx_fb_par *par) @@ -521,12 +650,17 @@ static void lcd_calc_clk_divider(struct da8xx_fb_par *par) lcd_clk = clk_get(2); div = lcd_clk / par->pxl_clk; - debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n", - lcd_clk, div, par->pxl_clk); + debug("LCD Clock: %d Divider: %d PixClk: %d\n", + lcd_clk, div, par->pxl_clk); /* Configure the LCD clock divisor. */ lcdc_write(LCD_CLK_DIVISOR(div) | (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl); + + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | + LCD_V2_CORE_CLK_EN, + &da8xx_fb_reg_base->clk_ena); } static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, @@ -566,7 +700,8 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, if (ret < 0) return ret; - if (QVGA != cfg->p_disp_panel->panel_type) + if ((QVGA != cfg->p_disp_panel->panel_type) && + (WVGA != cfg->p_disp_panel->panel_type)) return -EINVAL; if (cfg->bpp <= cfg->p_disp_panel->max_bpp && @@ -602,7 +737,7 @@ static void lcdc_dma_start(void) &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); } -static u32 lcdc_irq_handler(void) +static u32 lcdc_irq_handler_rev01(void) { struct da8xx_fb_par *par = da8xx_fb_info->par; u32 stat = lcdc_read(&da8xx_fb_reg_base->stat); @@ -610,7 +745,7 @@ static u32 lcdc_irq_handler(void) if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { debug("LCD_SYNC_LOST\n"); - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); lcdc_write(stat, &da8xx_fb_reg_base->stat); lcd_enable_raster(); return LCD_SYNC_LOST; @@ -622,13 +757,13 @@ static u32 lcdc_irq_handler(void) * interrupt via the following write to the status register. If * this is done after then one gets multiple PL done interrupts. */ - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); lcdc_write(stat, &da8xx_fb_reg_base->stat); /* Disable PL completion inerrupt */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); - reg_ras &= ~LCD_PL_ENABLE; + reg_ras &= ~LCD_V1_PL_INT_ENA; lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); /* Setup and start data loading mode */ @@ -650,6 +785,66 @@ static u32 lcdc_irq_handler(void) return stat; } +static u32 lcdc_irq_handler_rev02(void) +{ + struct da8xx_fb_par *par = da8xx_fb_info->par; + u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat); + u32 reg_int; + + if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { + debug("LCD_SYNC_LOST\n"); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + lcd_enable_raster(); + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_SYNC_LOST; + } else if (stat & LCD_PL_LOAD_DONE) { + debug("LCD_PL_LOAD_DONE\n"); + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + + /* Disable PL completion inerrupt */ + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) | + (LCD_V2_PL_INT_ENA); + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_PL_LOAD_DONE; + } else { + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + + if (stat & LCD_END_OF_FRAME0) + debug("LCD_END_OF_FRAME0\n"); + + lcdc_write(par->dma_start, + &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(par->dma_end, + &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + par->vsync_flag = 1; + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_END_OF_FRAME0; + } + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return stat; +} + +static u32 lcdc_irq_handler(void) +{ + if (lcd_revision == LCD_VERSION_1) + return lcdc_irq_handler_rev01(); + else + return lcdc_irq_handler_rev02(); +} + static u32 wait_for_event(u32 event) { u32 timeout = 50000; @@ -673,6 +868,7 @@ void *video_hw_init(void) { struct da8xx_fb_par *par; u32 size; + u32 rev; char *p; if (!lcd_panel) { @@ -685,6 +881,10 @@ void *video_hw_init(void) gpanel.plnSizeY = lcd_panel->height; switch (bits_x_pixel) { + case 32: + gpanel.gdfBytesPP = 4; + gpanel.gdfIndex = GDF_32BIT_X888RGB; + break; case 24: gpanel.gdfBytesPP = 4; gpanel.gdfIndex = GDF_32BIT_X888RGB; @@ -699,12 +899,29 @@ void *video_hw_init(void) break; } - da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE; + da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE; + + /* Determine LCD IP Version */ + rev = lcdc_read(&da8xx_fb_reg_base->revid); + switch (rev) { + case 0x4C100102: + lcd_revision = LCD_VERSION_1; + break; + case 0x4F200800: + case 0x4F201000: + lcd_revision = LCD_VERSION_2; + break; + default: + printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n", + rev); + lcd_revision = LCD_VERSION_1; + break; + } - debug("Resolution: %dx%d %x\n", - gpanel.winSizeX, - gpanel.winSizeY, - lcd_cfg.bpp); + debug("rev: 0x%x Resolution: %dx%d %d\n", rev, + gpanel.winSizeX, + gpanel.winSizeY, + da8xx_lcd_cfg->bpp); size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par); da8xx_fb_info = malloc(size); @@ -722,13 +939,14 @@ void *video_hw_init(void) par = da8xx_fb_info->par; par->pxl_clk = lcd_panel->pxl_clk; - if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) { + if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) { printf("lcd_init failed\n"); goto err_release_fb; } /* allocate frame buffer */ - par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp; + par->vram_size = lcd_panel->width * lcd_panel->height * + da8xx_lcd_cfg->bpp; par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8; par->vram_virt = malloc(par->vram_size); @@ -741,12 +959,13 @@ void *video_hw_init(void) printf("GLCD: malloc for frame buffer failed\n"); goto err_release_fb; } + gd->fb_base = (int)par->vram_virt; gpanel.frameAdrs = (unsigned int)par->vram_virt; da8xx_fb_info->screen_base = (char *) par->vram_virt; da8xx_fb_fix.smem_start = gpanel.frameAdrs; da8xx_fb_fix.smem_len = par->vram_size; - da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8; + da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8; par->dma_start = par->vram_phys; par->dma_end = par->dma_start + lcd_panel->height * @@ -762,7 +981,7 @@ void *video_hw_init(void) par->p_palette_base = (unsigned int)par->v_palette_base; /* Initialize par */ - da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp; + da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp; da8xx_fb_var.xres = lcd_panel->width; da8xx_fb_var.xres_virtual = lcd_panel->width; @@ -771,8 +990,8 @@ void *video_hw_init(void) da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS; da8xx_fb_var.grayscale = - lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; - da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp; + da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; + da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp; da8xx_fb_var.hsync_len = lcd_panel->hsw; da8xx_fb_var.vsync_len = lcd_panel->vsw; @@ -787,8 +1006,11 @@ void *video_hw_init(void) /* Clear interrupt */ memset((void *)par->vram_virt, 0, par->vram_size); - lcd_disable_raster(); - lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + if (lcd_revision == LCD_VERSION_1) + lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + else + lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat); debug("Palette at 0x%x size %d\n", par->p_palette_base, par->palette_sz); lcdc_dma_start(); @@ -823,8 +1045,10 @@ void video_set_lut(unsigned int index, /* color number */ return; } -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel) +void da8xx_video_init(const struct da8xx_panel *panel, + const struct lcd_ctrl_config *lcd_cfg, int bits_pixel) { lcd_panel = panel; + da8xx_lcd_cfg = lcd_cfg; bits_x_pixel = bits_pixel; } diff --git a/arch/arm/include/asm/arch-davinci/da8xx-fb.h b/drivers/video/da8xx-fb.h index c115034f06..6447a4047d 100644 --- a/arch/arm/include/asm/arch-davinci/da8xx-fb.h +++ b/drivers/video/da8xx-fb.h @@ -17,7 +17,8 @@ #define DA8XX_FB_H enum panel_type { - QVGA = 0 + QVGA = 0, + WVGA }; enum panel_shade { @@ -108,6 +109,8 @@ struct lcd_sync_arg { int pulse_width; }; -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel); +void da8xx_video_init(const struct da8xx_panel *panel, + const struct lcd_ctrl_config *lcd_cfg, + int bits_pixel); #endif /* ifndef DA8XX_FB_H */ diff --git a/drivers/video/exynos_mipi_dsi_common.c b/drivers/video/exynos_mipi_dsi_common.c index 2cc847f6e1..97e12484fd 100644 --- a/drivers/video/exynos_mipi_dsi_common.c +++ b/drivers/video/exynos_mipi_dsi_common.c @@ -50,7 +50,7 @@ static unsigned int dpll_table[15] = { }; static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, - unsigned int data0, unsigned int data1) + const unsigned char *data0, unsigned int data1) { unsigned int data_cnt = 0, payload = 0; @@ -62,42 +62,40 @@ static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, */ if ((data1 - data_cnt) < 4) { if ((data1 - data_cnt) == 3) { - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8 | - (*(u8 *)(data0 + (data_cnt + 2))) << 16; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8 | + data0[data_cnt + 2] << 16; debug("count = 3 payload = %x, %x %x %x\n", - payload, *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2))); + payload, data0[data_cnt], + data0[data_cnt + 1], + data0[data_cnt + 2]); } else if ((data1 - data_cnt) == 2) { - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8; debug("count = 2 payload = %x, %x %x\n", payload, - *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1))); + data0[data_cnt], data0[data_cnt + 1]); } else if ((data1 - data_cnt) == 1) { - payload = *(u8 *)(data0 + data_cnt); + payload = data0[data_cnt]; } } else { /* send 4bytes per one time. */ - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8 | - (*(u8 *)(data0 + (data_cnt + 2))) << 16 | - (*(u8 *)(data0 + (data_cnt + 3))) << 24; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8 | + data0[data_cnt + 2] << 16 | + data0[data_cnt + 3] << 24; debug("count = 4 payload = %x, %x %x %x %x\n", payload, *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2)), - *(u8 *)(data0 + (data_cnt + 3))); - + data0[data_cnt + 1], + data0[data_cnt + 2], + data0[data_cnt + 3]); } exynos_mipi_dsi_wr_tx_data(dsim, payload); } } int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1) + const unsigned char *data0, unsigned int data1) { unsigned int timeout = TRY_GET_FIFO_TIMEOUT; unsigned long delay_val, delay; @@ -136,8 +134,8 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_DCS_SHORT_WRITE_PARAM: case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: debug("data0 = %x data1 = %x\n", - data0, data1); - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + data0[0], data0[1]); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); if (check_rx_ack) { /* process response func should be implemented */ return 0; @@ -150,7 +148,7 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_COLOR_MODE_ON: case MIPI_DSI_SHUTDOWN_PERIPHERAL: case MIPI_DSI_TURN_ON_PERIPHERAL: - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); if (check_rx_ack) { /* process response func should be implemented. */ return 0; @@ -172,7 +170,7 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: case MIPI_DSI_DCS_READ: exynos_mipi_dsi_clear_all_interrupt(dsim); - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); /* process response func should be implemented. */ return 0; @@ -183,21 +181,19 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_GENERIC_LONG_WRITE: case MIPI_DSI_DCS_LONG_WRITE: { - unsigned int data_cnt = 0, payload = 0; + unsigned int payload = 0; /* if data count is less then 4, then send 3bytes data. */ if (data1 < 4) { - payload = *(u8 *)(data0) | - *(u8 *)(data0 + 1) << 8 | - *(u8 *)(data0 + 2) << 16; + payload = data0[0] | + data0[1] << 8 | + data0[2] << 16; exynos_mipi_dsi_wr_tx_data(dsim, payload); debug("count = %d payload = %x,%x %x %x\n", - data1, payload, - *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2))); + data1, payload, data0[0], + data0[1], data0[2]); } else { /* in case that data count is more then 4 */ exynos_mipi_dsi_long_data_wr(dsim, data0, data1); diff --git a/drivers/video/exynos_mipi_dsi_common.h b/drivers/video/exynos_mipi_dsi_common.h index 318c7ecec3..ef6510abdd 100644 --- a/drivers/video/exynos_mipi_dsi_common.h +++ b/drivers/video/exynos_mipi_dsi_common.h @@ -13,7 +13,7 @@ #define _EXYNOS_MIPI_DSI_COMMON_H int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, unsigned int enable); unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, unsigned int pre_divider, unsigned int main_divider, diff --git a/drivers/video/exynos_mipi_dsi_lowlevel.c b/drivers/video/exynos_mipi_dsi_lowlevel.c index b47eee45de..1313bcea4c 100644 --- a/drivers/video/exynos_mipi_dsi_lowlevel.c +++ b/drivers/video/exynos_mipi_dsi_lowlevel.c @@ -600,7 +600,7 @@ unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim) } void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1) + unsigned int di, const unsigned char data0, const unsigned char data1) { struct exynos_mipi_dsim *mipi_dsim = (struct exynos_mipi_dsim *)samsung_get_base_mipi_dsim(); diff --git a/drivers/video/exynos_mipi_dsi_lowlevel.h b/drivers/video/exynos_mipi_dsi_lowlevel.h index 8a45954e9e..59f6ce09e4 100644 --- a/drivers/video/exynos_mipi_dsi_lowlevel.h +++ b/drivers/video/exynos_mipi_dsi_lowlevel.h @@ -91,7 +91,7 @@ unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim); void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim); void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1); + unsigned int di, const unsigned char data0, const unsigned char data1); void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim, unsigned int tx_data); diff --git a/drivers/video/formike.c b/drivers/video/formike.c new file mode 100644 index 0000000000..b9b6822138 --- /dev/null +++ b/drivers/video/formike.c @@ -0,0 +1,511 @@ +/* + * LCD: Formike, TFT 4.3", 480x800, RGB24, KWH043ST20-F01, DriverIC NT35510-16 + * LCD initialization via SPI + * + * SPDX-License-Identifier: GPL-2.0 + * Based on: + * + */ +#include <common.h> +#include <errno.h> +#include <spi.h> + +#define TAG_READ 0x80 +#define TAG_WRITE 0x00 + +#define TAG_DATA 0x40 +#define TAG_COMMAND 0x00 + +#define TAG_ADDR_H 0x20 +#define TAG_ADDR_L 0x00 + +static int spi_write_tag_val(struct spi_slave *spi, unsigned char tag, + unsigned char val) +{ + unsigned long flags = SPI_XFER_BEGIN; + u8 buf[2]; + int ret; + + buf[0] = tag; + buf[1] = val; + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, 16, buf, NULL, flags); +#ifdef KWH043ST20_F01_SPI_DEBUG + printf("spi_write_tag_val: tag=%02X, val=%02X ret: %d\n", + tag, val, ret); +#endif /* KWH043ST20_F01_SPI_DEBUG */ + if (ret) + debug("%s: Failed to send: %d\n", __func__, ret); + + return ret; +} + +static void spi_write_dat(struct spi_slave *spi, unsigned int val) +{ + spi_write_tag_val(spi, TAG_WRITE|TAG_DATA, val); +} + +static void spi_write_com(struct spi_slave *spi, unsigned int addr) +{ + spi_write_tag_val(spi, TAG_WRITE|TAG_COMMAND|TAG_ADDR_H, + (addr & 0xff00) >> 8); + spi_write_tag_val(spi, TAG_WRITE|TAG_COMMAND|TAG_ADDR_L, + (addr & 0x00ff) >> 0); +} + +int kwh043st20_f01_spi_startup(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + int ret; + + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + if (!spi) { + debug("%s: Failed to set up slave\n", __func__); + return -1; + } + + ret = spi_claim_bus(spi); + if (ret) { + debug("%s: Failed to claim SPI bus: %d\n", __func__, ret); + goto err_claim_bus; + } + + + /* LV2 Page 1 enable */ + spi_write_com(spi, 0xF000); spi_write_dat(spi, 0x55); + spi_write_com(spi, 0xF001); spi_write_dat(spi, 0xAA); + spi_write_com(spi, 0xF002); spi_write_dat(spi, 0x52); + spi_write_com(spi, 0xF003); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xF004); spi_write_dat(spi, 0x01); + + /* AVDD Set AVDD 5.2V */ + spi_write_com(spi, 0xB000); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB001); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB002); spi_write_dat(spi, 0x0D); + + /* AVDD ratio */ + spi_write_com(spi, 0xB600); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB601); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB602); spi_write_dat(spi, 0x34); + + /* AVEE -5.2V */ + spi_write_com(spi, 0xB100); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB101); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB102); spi_write_dat(spi, 0x0D); + + /* AVEE ratio */ + spi_write_com(spi, 0xB700); spi_write_dat(spi, 0x35); + spi_write_com(spi, 0xB701); spi_write_dat(spi, 0x35); + spi_write_com(spi, 0xB702); spi_write_dat(spi, 0x35); + + /* VCL -2.5V */ + spi_write_com(spi, 0xB200); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xB201); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xB202); spi_write_dat(spi, 0x00); + + /* VCL ratio */ + spi_write_com(spi, 0xB800); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xB801); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xB802); spi_write_dat(spi, 0x24); + + /* VGH 15V */ + spi_write_com(spi, 0xBF00); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xB300); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xB301); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xB302); spi_write_dat(spi, 0x08); + + /* VGH ratio */ + spi_write_com(spi, 0xB900); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB901); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB902); spi_write_dat(spi, 0x34); + + /* VGLX ratio */ + spi_write_com(spi, 0xBA00); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xBA01); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xBA02); spi_write_dat(spi, 0x24); + + /* VGMP/VGSP 4.7V/0V */ + spi_write_com(spi, 0xBC00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBC01); spi_write_dat(spi, 0x88); + spi_write_com(spi, 0xBC02); spi_write_dat(spi, 0x00); + + /* VGMN/VGSN -4.7V/0V */ + spi_write_com(spi, 0xBD00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBD01); spi_write_dat(spi, 0x88); + spi_write_com(spi, 0xBD02); spi_write_dat(spi, 0x00); + + /* VCOM 1.525V */ + spi_write_com(spi, 0xBE00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBE01); spi_write_dat(spi, 0x7A); + + /* Gamma Setting */ + spi_write_com(spi, 0xD100); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD101); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD102); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD103); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD104); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD105); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD106); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD107); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD108); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD109); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD10A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD10B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD10C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD10D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD10E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD10F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD110); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD111); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD112); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD113); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD114); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD115); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD116); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD117); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD118); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD119); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD11A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD11B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD11C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD11D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD11E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD11F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD120); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD121); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD122); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD123); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD124); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD125); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD126); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD127); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD128); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD129); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD12A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD12B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD12C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD12D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD12E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD12F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD130); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD131); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD132); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD133); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD200); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD201); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD202); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD203); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD204); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD205); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD206); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD207); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD208); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD209); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD20A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD20B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD20C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD20D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD20E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD20F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD210); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD211); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD212); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD213); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD214); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD215); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD216); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD217); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD218); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD219); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD21A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD21B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD21C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD21D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD21E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD21F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD220); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD221); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD222); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD223); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD224); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD225); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD226); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD227); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD228); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD229); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD22A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD22B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD22C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD22D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD22E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD22F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD230); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD231); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD232); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD233); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD300); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD301); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD302); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD303); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD304); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD305); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD306); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD307); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD308); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD309); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD30A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD30B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD30C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD30D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD30E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD30F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD310); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD311); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD312); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD313); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD314); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD315); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD316); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD317); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD318); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD319); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD31A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD31B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD31C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD31D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD31E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD31F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD320); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD321); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD322); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD323); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD324); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD325); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD326); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD327); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD328); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD329); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD32A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD32B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD32C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD32D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD32E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD32F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD330); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD331); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD332); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD333); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD400); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD401); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD402); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD403); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD404); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD405); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD406); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD407); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD408); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD409); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD40A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD40B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD40C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD40D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD40E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD40F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD410); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD411); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD412); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD413); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD414); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD415); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD416); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD417); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD418); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD419); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD41A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD41B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD41C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD41D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD41E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD41F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD420); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD421); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD422); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD423); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD424); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD425); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD426); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD427); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD428); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD429); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD42A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD42B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD42C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD42D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD42E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD42F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD430); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD431); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD432); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD433); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD500); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD501); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD502); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD503); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD504); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD505); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD506); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD507); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD508); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD509); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD50A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD50B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD50C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD50D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD50E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD50F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD510); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD511); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD512); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD513); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD514); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD515); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD516); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD517); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD518); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD519); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD51A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD51B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD51C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD51D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD51E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD51F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD520); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD521); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD522); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD523); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD524); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD525); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD526); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD527); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD528); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD529); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD52A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD52B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD52C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD52D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD52E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD52F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD530); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD531); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD532); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD533); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD600); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD601); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD602); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD603); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD604); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD605); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD606); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD607); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD608); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD609); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD60A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD60B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD60C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD60D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD60E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD60F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD610); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD611); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD612); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD613); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD614); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD615); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD616); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD617); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD618); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD619); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD61A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD61B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD61C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD61D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD61E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD61F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD620); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD621); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD622); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD623); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD624); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD625); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD626); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD627); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD628); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD629); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD62A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD62B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD62C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD62D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD62E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD62F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD630); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD631); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD632); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD633); spi_write_dat(spi, 0xFF); + + /* LV2 Page 0 enable */ + spi_write_com(spi, 0xF000); spi_write_dat(spi, 0x55); + spi_write_com(spi, 0xF001); spi_write_dat(spi, 0xAA); + spi_write_com(spi, 0xF002); spi_write_dat(spi, 0x52); + spi_write_com(spi, 0xF003); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xF004); spi_write_dat(spi, 0x00); + + /* Display control */ + spi_write_com(spi, 0xB100); spi_write_dat(spi, 0xFC); + spi_write_com(spi, 0xB101); spi_write_dat(spi, 0x00); + + /* Source hold time */ + spi_write_com(spi, 0xB600); spi_write_dat(spi, 0x05); + + /* Gate EQ control */ + spi_write_com(spi, 0xB700); spi_write_dat(spi, 0x70); + spi_write_com(spi, 0xB701); spi_write_dat(spi, 0x70); + + /* Source EQ control (Mode 2) */ + spi_write_com(spi, 0xB800); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xB801); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xB802); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xB803); spi_write_dat(spi, 0x05); + + /* Inversion mode (Column) */ + spi_write_com(spi, 0xBC00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBC01); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBC02); spi_write_dat(spi, 0x00); + + /* Timing control 8phase dual side/4H/4delay/RST_EN */ + spi_write_com(spi, 0xC900); spi_write_dat(spi, 0xD0); + spi_write_com(spi, 0xC901); spi_write_dat(spi, 0x82); + spi_write_com(spi, 0xC902); spi_write_dat(spi, 0x50); + spi_write_com(spi, 0xC903); spi_write_dat(spi, 0x50); + spi_write_com(spi, 0xC904); spi_write_dat(spi, 0x50); + + spi_write_com(spi, 0x3A00); spi_write_dat(spi, 0x55); + mdelay(120); + spi_write_com(spi, 0x1100); + mdelay(120); + spi_write_com(spi, 0x2900); + mdelay(120); + /* spi_write_com(spi, 0x2100); spi_write_dat(spi, 0x00); */ + spi_write_com(spi, 0x2C00); + + return 0; +err_claim_bus: + spi_free_slave(spi); + return -1; +} diff --git a/drivers/video/l5f31188.c b/drivers/video/l5f31188.c new file mode 100644 index 0000000000..3312dcfb31 --- /dev/null +++ b/drivers/video/l5f31188.c @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. All rights reserved. + * Hyungwon Hwang <human.hwang@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/mipi_dsim.h> + +#define SCAN_FROM_LEFT_TO_RIGHT 0 +#define SCAN_FROM_RIGHT_TO_LEFT 1 +#define SCAN_FROM_TOP_TO_BOTTOM 0 +#define SCAN_FROM_BOTTOM_TO_TOP 1 + +static void l5f31188_sleep_in(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x10, 0x00); +} + +static void l5f31188_sleep_out(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x11, 0x00); +} + +static void l5f31188_set_gamma(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x26, 0x00); +} + +static void l5f31188_display_off(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x28, 0x00); +} + +static void l5f31188_display_on(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x29, 0x00); +} + +static void l5f31188_ctl_memory_access(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, + int h_direction, int v_direction) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x36, + (((h_direction & 0x1) << 1) | (v_direction & 0x1))); +} + +static void l5f31188_set_pixel_format(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x3A, 0x70); +} + +static void l5f31188_write_disbv(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, unsigned int brightness) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x51, brightness); +} + +static void l5f31188_write_ctrld(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x53, 0x2C); +} + +static void l5f31188_write_cabc(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, + unsigned int wm_mode) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x55, wm_mode); +} + +static void l5f31188_write_cabcmb(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, unsigned int min_brightness) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x5E, + min_brightness); +} + +static void l5f31188_set_extension(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xB9, 0xFF, 0x83, 0x94 + }; + + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_dgc_lut(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xC1, 0x01, 0x00, 0x04, 0x0E, 0x18, 0x1E, 0x26, + 0x2F, 0x36, 0x3E, 0x47, 0x4E, 0x56, 0x5D, 0x65, + 0x6D, 0x75, 0x7D, 0x84, 0x8C, 0x94, 0x9C, 0xA4, + 0xAD, 0xB5, 0xBD, 0xC5, 0xCC, 0xD4, 0xDE, 0xE5, + 0xEE, 0xF7, 0xFF, 0x3F, 0x9A, 0xCE, 0xD4, 0x21, + 0xA1, 0x26, 0x54, 0x00, 0x00, 0x04, 0x0E, 0x19, + 0x1F, 0x27, 0x30, 0x37, 0x40, 0x48, 0x50, 0x58, + 0x60, 0x67, 0x6F, 0x77, 0x7F, 0x87, 0x8F, 0x97, + 0x9F, 0xA7, 0xB0, 0xB8, 0xC0, 0xC8, 0xCE, 0xD8, + 0xE0, 0xE7, 0xF0, 0xF7, 0xFF, 0x3C, 0xEB, 0xFD, + 0x2F, 0x66, 0xA8, 0x2C, 0x46, 0x00, 0x00, 0x04, + 0x0E, 0x18, 0x1E, 0x26, 0x30, 0x38, 0x41, 0x4A, + 0x52, 0x5A, 0x62, 0x6B, 0x73, 0x7B, 0x83, 0x8C, + 0x94, 0x9C, 0xA5, 0xAD, 0xB6, 0xBD, 0xC5, 0xCC, + 0xD4, 0xDD, 0xE3, 0xEB, 0xF2, 0xF9, 0xFF, 0x3F, + 0xA4, 0x8A, 0x8F, 0xC7, 0x33, 0xF5, 0xE9, 0x00 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_tcon(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xC7, 0x00, 0x20 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_ptba(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xBF, 0x06, 0x10 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_eco(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xC6, 0x0C); +} + +static int l5f31188_panel_init(struct mipi_dsim_device *dev) +{ + struct mipi_dsim_master_ops *ops = dev->master_ops; + + l5f31188_set_extension(dev, ops); + l5f31188_set_dgc_lut(dev, ops); + + l5f31188_set_eco(dev, ops); + l5f31188_set_tcon(dev, ops); + l5f31188_set_ptba(dev, ops); + l5f31188_set_gamma(dev, ops); + l5f31188_ctl_memory_access(dev, ops, + SCAN_FROM_LEFT_TO_RIGHT, SCAN_FROM_TOP_TO_BOTTOM); + l5f31188_set_pixel_format(dev, ops); + l5f31188_write_disbv(dev, ops, 0xFF); + l5f31188_write_ctrld(dev, ops); + l5f31188_write_cabc(dev, ops, 0x0); + l5f31188_write_cabcmb(dev, ops, 0x0); + + l5f31188_sleep_out(dev, ops); + + /* 120 msec */ + udelay(120 * 1000); + + return 0; +} + +static void l5f31188_display_enable(struct mipi_dsim_device *dev) +{ + struct mipi_dsim_master_ops *ops = dev->master_ops; + l5f31188_display_on(dev, ops); +} + +static struct mipi_dsim_lcd_driver l5f31188_dsim_ddi_driver = { + .name = "l5f31188", + .id = -1, + + .mipi_panel_init = l5f31188_panel_init, + .mipi_display_on = l5f31188_display_enable, +}; + +void l5f31188_init(void) +{ + exynos_mipi_dsi_register_lcd_driver(&l5f31188_dsim_ddi_driver); +} diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 6bf9fc5036..03b0f88acf 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -15,11 +15,25 @@ #include <asm/errno.h> #include <asm/io.h> +#include <asm/imx-common/dma.h> + #include "videomodes.h" #define PS2KHZ(ps) (1000000000UL / (ps)) static GraphicDevice panel; +struct mxs_dma_desc desc; + +/** + * mxsfb_system_setup() - Fine-tune LCDIF configuration + * + * This function is used to adjust the LCDIF configuration. This is usually + * needed when driving the controller in System-Mode to operate an 8080 or + * 6800 connected SmartLCD. + */ +__weak void mxsfb_system_setup(void) +{ +} /* * DENX M28EVK: @@ -75,6 +89,9 @@ static void mxs_lcd_init(GraphicDevice *panel, writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET, ®s->hw_lcdif_ctrl1); + + mxsfb_system_setup(); + writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, ®s->hw_lcdif_transfer_count); @@ -102,8 +119,10 @@ static void mxs_lcd_init(GraphicDevice *panel, /* Flush FIFO first */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set); +#ifndef CONFIG_VIDEO_MXS_MODE_SYSTEM /* Sync signals ON */ setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON); +#endif /* FIFO cleared */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr); @@ -161,7 +180,8 @@ void *video_hw_init(void) panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; /* Allocate framebuffer */ - fb = malloc(panel.memSize); + fb = memalign(ARCH_DMA_MINALIGN, + roundup(panel.memSize, ARCH_DMA_MINALIGN)); if (!fb) { printf("MXSFB: Error allocating framebuffer!\n"); return NULL; @@ -177,5 +197,28 @@ void *video_hw_init(void) /* Start framebuffer */ mxs_lcd_init(&panel, &mode, bpp); +#ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM + /* + * If the LCD runs in system mode, the LCD refresh has to be triggered + * manually by setting the RUN bit in HW_LCDIF_CTRL register. To avoid + * having to set this bit manually after every single change in the + * framebuffer memory, we set up specially crafted circular DMA, which + * sets the RUN bit, then waits until it gets cleared and repeats this + * infinitelly. This way, we get smooth continuous updates of the LCD. + */ + struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; + + memset(&desc, 0, sizeof(struct mxs_dma_desc)); + desc.address = (dma_addr_t)&desc; + desc.cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN | + MXS_DMA_DESC_WAIT4END | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + desc.cmd.pio_words[0] = readl(®s->hw_lcdif_ctrl) | LCDIF_CTRL_RUN; + desc.cmd.next = (uint32_t)&desc.cmd; + + /* Execute the DMA chain. */ + mxs_dma_circ_start(MXS_DMA_CHANNEL_AHB_APBH_LCDIF, &desc); +#endif + return (void *)&panel; } diff --git a/drivers/video/s6e8ax0.c b/drivers/video/s6e8ax0.c index fc092522b2..0e97f511fd 100644 --- a/drivers/video/s6e8ax0.c +++ b/drivers/video/s6e8ax0.c @@ -34,11 +34,11 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev) if (reverse) { ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send_reverse, + data_to_send_reverse, ARRAY_SIZE(data_to_send_reverse)); } else { ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } } @@ -50,8 +50,7 @@ static void s6e8ax0_display_cond(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev) @@ -65,15 +64,18 @@ static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_gamma_update(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0xf7, 0x03 + }; - ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xf7, 0x3); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev) @@ -84,8 +86,7 @@ static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev) @@ -97,8 +98,7 @@ static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev) @@ -109,8 +109,7 @@ static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev) @@ -121,8 +120,7 @@ static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev) @@ -133,14 +131,18 @@ static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control3(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0xe3, 0x40 + }; - ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xe3, 0x40); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev) @@ -151,7 +153,7 @@ static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev) @@ -162,24 +164,29 @@ static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_display_on(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0x29, 0x00 + }; - ops->cmd_write(dsim_dev, - MIPI_DSI_DCS_SHORT_WRITE, 0x29, 0x00); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_sleep_out(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0x11, 0x00 + }; - ops->cmd_write(dsim_dev, - MIPI_DSI_DCS_SHORT_WRITE, 0x11, 0x00); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev) @@ -190,7 +197,7 @@ static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev) @@ -201,7 +208,7 @@ static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_panel_init(struct mipi_dsim_device *dsim_dev) diff --git a/drivers/video/sed156x.c b/drivers/video/sed156x.c index d8b0d7f5d6..f324354c39 100644 --- a/drivers/video/sed156x.c +++ b/drivers/video/sed156x.c @@ -25,7 +25,6 @@ /* include the font data */ #include <video_font.h> -#include <video_font_data.h> #if VIDEO_FONT_WIDTH != 8 || VIDEO_FONT_HEIGHT != 16 #error Expecting VIDEO_FONT_WIDTH == 8 && VIDEO_FONT_HEIGHT == 16 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7e255ce8ae..3ade624702 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -18,6 +18,7 @@ COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS-$(CONFIG_S5P) += s5p_wdt.o COBJS-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o COBJS-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o +COBJS-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c new file mode 100644 index 0000000000..7ea4b604cd --- /dev/null +++ b/drivers/watchdog/omap_wdt.c @@ -0,0 +1,121 @@ +/* + * omap_wdt.c + * + * (C) Copyright 2013 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * SPDX-License-Identifier: GPL-2.0 + * + * Based on: + * + * Watchdog driver for the TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog + * + * commit 2d991a164a61858012651e13c59521975504e260 + * Author: Bill Pemberton <wfp5p@virginia.edu> + * Date: Mon Nov 19 13:21:41 2012 -0500 + * + * watchdog: remove use of __devinit + * + * CONFIG_HOTPLUG is going away as an option so __devinit is no longer + * needed. + * + * Author: MontaVista Software, Inc. + * <gdavis@mvista.com> or <source@mvista.com> + * + * History: + * + * 20030527: George G. Davis <gdavis@mvista.com> + * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c + * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Copyright (c) 2004 Texas Instruments. + * 1. Modified to support OMAP1610 32-KHz watchdog timer + * 2. Ported to 2.6 kernel + * + * Copyright (c) 2005 David Brownell + * Use the driver model and standard identifiers; handle bigger timeouts. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/cpu.h> + +/* Hardware timeout in seconds */ +#define WDT_HW_TIMEOUT 60 + +static unsigned int wdt_trgr_pattern = 0x1234; + +void hw_watchdog_reset(void) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + + /* wait for posted write to complete */ + while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WTGR) + ; + + wdt_trgr_pattern = ~wdt_trgr_pattern; + writel(wdt_trgr_pattern, &wdt->wdtwtgr); + + /* wait for posted write to complete */ + while ((readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WTGR)) + ; +} + +static int omap_wdt_set_timeout(unsigned int timeout) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + u32 pre_margin = GET_WLDR_VAL(timeout); + + /* just count up at 32 KHz */ + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR) + ; + + writel(pre_margin, &wdt->wdtwldr); + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR) + ; + + return 0; +} + +void hw_watchdog_init(void) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + + /* initialize prescaler */ + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR) + ; + + writel(WDT_WCLR_PRE | (PTV << WDT_WCLR_PTV_OFF), &wdt->wdtwclr); + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR) + ; + + omap_wdt_set_timeout(WDT_HW_TIMEOUT); + + /* Sequence to enable the watchdog */ + writel(0xBBBB, &wdt->wdtwspr); + while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR) + ; + + writel(0x4444, &wdt->wdtwspr); + while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR) + ; +} + +void hw_watchdog_disable(void) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + + /* + * Disable watchdog + */ + writel(0xAAAA, &wdt->wdtwspr); + while (readl(&wdt->wdtwwps) != 0x0) + ; + writel(0x5555, &wdt->wdtwspr); + while (readl(&wdt->wdtwwps) != 0x0) + ; +} diff --git a/dts/Makefile b/dts/Makefile index 35303f7c5a..3cf991eaf2 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -17,15 +17,15 @@ $(error Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file)) DEVICE_TREE = $(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE)) endif -$(if $(CONFIG_ARCH_DEVICE_TREE),,\ -$(error Your architecture does not have device tree support enabled. \ -Please define CONFIG_ARCH_DEVICE_TREE)) +DTS_INCDIRS = $(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts +DTS_INCDIRS += $(SRCTREE)/board/$(VENDOR)/dts +DTS_INCDIRS += $(SRCTREE)/arch/$(ARCH)/dts -# We preprocess the device tree file provide a useful define -DTS_CPPFLAGS := -x assembler-with-cpp \ - -DARCH_CPU_DTS=\"$(SRCTREE)/arch/$(ARCH)/dts/$(CONFIG_ARCH_DEVICE_TREE).dtsi\" \ - -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" \ - -I$(SRCTREE)/board/$(VENDOR)/dts -I$(SRCTREE)/arch/$(ARCH)/dts +DTS_CPPFLAGS := -x assembler-with-cpp -undef -D__DTS__ \ + -nostdinc $(addprefix -I,$(DTS_INCDIRS)) + +DTC_FLAGS := -R 4 -p 0x1000 \ + $(addprefix -i ,$(DTS_INCDIRS)) all: $(obj).depend $(LIB) @@ -35,13 +35,8 @@ all: $(obj).depend $(LIB) DT_BIN := $(obj)dt.dtb $(DT_BIN): $(TOPDIR)/board/$(VENDOR)/dts/$(DEVICE_TREE).dts - rc=$$( \ - cat $< | $(CPP) -P $(DTS_CPPFLAGS) - | \ - { { $(DTC) -R 4 -p 0x1000 -O dtb -o ${DT_BIN} - 2>&1 ; \ - echo $$? >&3 ; } | \ - grep -v '^DTC: dts->dtb on file' ; \ - } 3>&1 1>&2 ) ; \ - exit $$rc + $(CPP) $(DTS_CPPFLAGS) $< -o $(DT_BIN).dts.tmp + $(DTC) $(DTC_FLAGS) -O dtb -o ${DT_BIN} $(DT_BIN).dts.tmp process_lds = \ $(1) | sed -r -n 's/^OUTPUT_$(2)[ ("]*([^")]*).*/\1/p' diff --git a/fs/yaffs2/yaffs_qsort.c b/fs/yaffs2/yaffs_qsort.c index afd1ffa799..1ca5895740 100644 --- a/fs/yaffs2/yaffs_qsort.c +++ b/fs/yaffs2/yaffs_qsort.c @@ -2,29 +2,7 @@ * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #include "yportenv.h" diff --git a/include/api_public.h b/include/api_public.h index 4420c990b4..f5c89f3f13 100644 --- a/include/api_public.h +++ b/include/api_public.h @@ -3,50 +3,7 @@ * * Written by: Rafal Jaworowski <raj@semihalf.com> * - * This file is dual licensed; you can use it under the terms of - * either the GPL, or the BSD license, at your option. - * - * I. GPL: - * - * This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Alternatively, - * - * II. BSD license: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #ifndef _API_PUBLIC_H_ diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 29e0438ba4..43872010c7 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -69,7 +69,6 @@ typedef struct bd_info { unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ - defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || \ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 09043435b4..2f0bc6b062 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -33,7 +33,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE @@ -75,6 +74,13 @@ #define VSC3308_TX_ADDRESS 0x02 #define VSC3308_RX_ADDRESS 0x03 +/* IDT clock synthesizers */ +#define CONFIG_IDT8T49N222A +#define I2C_CH_IDT 0x9 + +#define IDT_SERDES1_ADDRESS 0x6E +#define IDT_SERDES2_ADDRESS 0x6C + #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH @@ -578,6 +584,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_RMAN + /* Default address of microcode for the Linux Fman driver */ #if defined(CONFIG_SPIFLASH) /* diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 1ab6891585..03f3a4f803 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -224,6 +224,10 @@ combinations. this should be removed later #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR +/* DSP CCSRBAR */ +#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT +#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT + /* * IFC Definitions */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h new file mode 100644 index 0000000000..83779eff86 --- /dev/null +++ b/include/configs/C29XPCIE.h @@ -0,0 +1,456 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * C29XPCIE board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_PHYS_64BIT + +#ifdef CONFIG_C29XPCIE +#define CONFIG_PPC_C29X +#endif + +#ifdef CONFIG_SPIFLASH +#define CONFIG_RAMBOOT_SPIFLASH +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ + +#define CONFIG_PCI /* Enable PCI/PCIE */ +#ifdef CONFIG_PCI +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI + +#define CONFIG_E1000 + +/* + * PCI Windows + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +/* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 1" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_TSEC_ENET +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_DDR_CLK_FREQ 100000000 +#define CONFIG_SYS_CLK_FREQ 66666666 + +#define CONFIG_HWCONFIG + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_PANIC_HANG + +/* DDR Setup */ +#define CONFIG_FSL_DDR3 +#define CONFIG_DDR_SPD +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x50 +#define CONFIG_SYS_DDR_RAW_TIMING + +/* DDR ECC Setup*/ +#define CONFIG_DDR_ECC +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER + +#define CONFIG_SYS_SDRAM_SIZE 512 +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR + +/* Platform SRAM setting */ +#define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 +#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ + (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) +#define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) + +/* + * IFC Definitions + */ +/* NOR Flash on IFC */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ + +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ + +/* 16Bit NOR Flash - S29GL512S10TFI01 */ +#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1e) | \ + FTIM1_NOR_TRAD_NOR(0x0f) | \ + FTIM1_NOR_TSEQRAD_NOR(0x0f)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +/* CFI for NOR Flash */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* 8Bit NAND Flash - K9F1G08U0B */ +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_NAND \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2k */ \ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ + FTIM0_NAND_TWP(0x0c) | \ + FTIM0_NAND_TWCHT(0x08) | \ + FTIM0_NAND_TWH(0x06)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ + FTIM1_NAND_TWBE(0x1d) | \ + FTIM1_NAND_TRR(0x08) | \ + FTIM1_NAND_TRP(0x0c)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x18)) +#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +/* Set up IFC registers for boot location NOR/NAND */ +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + +/* CPLD on IFC, selected by CS2 */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ + | CONFIG_SYS_CPLD_BASE) + +#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR2 0x0 +/* CPLD Timing parameters for IFC CS2 */ +#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS2_FTIM3 0x0 + +#if defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#endif + +#define CONFIG_BOARD_EARLY_INIT_R + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 +#define CONFIG_SYS_INIT_RAM_END 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ + - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SERIAL_MULTI /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 + +/* I2C EEPROM */ +/* enable read and write access to EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +#define CONFIG_CMD_I2C + +/* eSPI - Enhanced SPI */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_EON +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_NET_MULTI +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +/* Default mode is RGMII mode */ +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 2 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#if defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#endif +#else +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif + +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#endif + +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=name/of/device-tree.dtb\0" \ + "othbootargs=ramdisk_size=600000\0" \ + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs; " \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h deleted file mode 100644 index 40471b78a1..0000000000 --- a/include/configs/CANBT.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * (C) Copyright 2001 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405CR 1 /* This is a PPC405CR CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_CANBT 1 /* ...on a CANBT board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ - -#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw console=ttyS0,115200; " \ - "bootm ffe00000 ffe80000" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#undef CONFIG_PCI_PNP /* no pci plug-and-play */ - -#define CONFIG_PHY_ADDR 0 /* PHY address */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_EEPROM - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */ - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#if 0 /* Use FLASH for environment variables */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00010000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ - -#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ - -#else /* Use EEPROM for environment variables */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars */ - /* total size of a CAT24WC08 is 1024 bytes */ -#endif - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC08) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (CAN/USB) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x010053C0 /* enable Ready, BEM=1 */ -#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (Misc-IO/LEDs) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x000004c0 /* no Ready, BEM=1 */ -#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (CAN Features) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x80000040 /* no Ready, BEM=1 */ -#define CONFIG_SYS_EBC_PB3CR 0xF021C000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=32bit */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in RAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x00ef0000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 6c6ce58fb8..ddcbfa6a26 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -24,7 +24,6 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index d1ce9fdc8d..edece1f9b5 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -16,42 +16,105 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_MMC_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x18000 +#define CONFIG_SPL_MAX_SIZE (96 * 1024) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_MMC_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_FLASH_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x18000 +#define CONFIG_SPL_MAX_SIZE (96 * 1024) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_SPI_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #define CONFIG_NAND_FSL_ELBC #ifdef CONFIG_NAND #define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SYS_TEXT_BASE 0x00201000 -#define CONFIG_SPL_TEXT_BASE 0xfffff000 -#define CONFIG_SPL_MAX_SIZE 4096 -#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 -#define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SPL_MAX_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 4096 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif /* High Level Configuration Options */ @@ -225,11 +288,11 @@ #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) +#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE /* NAND flash config */ @@ -292,6 +355,43 @@ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) /* + * Config the L2 Cache as L2 SRAM +*/ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) +#else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif +#endif +#endif + +/* * Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -299,7 +399,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -521,7 +621,7 @@ /* * Environment */ -#ifdef CONFIG_RAMBOOT_SPIFLASH +#ifdef CONFIG_SPIFLASH #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 @@ -530,14 +630,20 @@ #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_RAMBOOT_SDCARD) +#elif defined(CONFIG_SDCARD) #define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SYS_MMC_ENV_DEV 0 #elif defined(CONFIG_NAND) -#define CONFIG_ENV_IS_IN_NAND +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#else #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#endif +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1024 * 1024) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 9814ca2012..905bacfa96 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -37,7 +37,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h new file mode 100644 index 0000000000..9fa6b77ab1 --- /dev/null +++ b/include/configs/T4240EMU.h @@ -0,0 +1,170 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T4240 EMU board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_T4240EMU +#define CONFIG_PHYS_64BIT + +#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_FSL_DDR_EMU 1 +#define CONFIG_SYS_FSL_NO_QIXIS 1 +#define CONFIG_SYS_FSL_NO_SERDES 1 + +#include "t4qds.h" + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CACHE_FLUSH + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 133333333 +#define CONFIG_FSL_TBCLK_EXTRA_DIV 100 + + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_32 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(0) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x1) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x1)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \ + FTIM2_NOR_TCH(0x0) | \ + FTIM2_NOR_TWP(0x1)) +#define CONFIG_SYS_NOR_FTIM3 0x04000000 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ +#define CONFIG_SYS_FSL_I2C2_SPEED 4000000 + +/* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + + + +#define CONFIG_BOOTDELAY 0 + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240emu/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240emu/t4240emu.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* + * For emulation this causes u-boot to jump to the start of the proof point + * app code automatically + */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_LINUX \ + "errata;" \ + "setenv othbootargs ignore_loglevel;" \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#endif /* __CONFIG_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 9ac7f69922..92a30ab09f 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -7,6 +7,9 @@ /* * T4240 QDS board configuration file */ +#ifndef __CONFIG_H +#define __CONFIG_H + #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT @@ -15,4 +18,543 @@ #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg +#endif + +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + +#define CONFIG_SRIO_PCIE_BOOT_MASTER +#define CONFIG_DDR_ECC + #include "t4qds.h" + +#ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RST_FORCE_MEM 0x1 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR +#define VSC3316_FSM_TX_ADDR 0x70 +#define VSC3316_FSM_RX_ADDR 0x71 + +/* + * RapidIO + */ + +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 +#endif + + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define __USB_PHY_TYPE utmi + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240qds/t4240qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index b18a3fa643..43d3d99bcb 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -31,6 +31,8 @@ #define CONFIG_HOSTNAME a3m071 #endif +#define CONFIG_BOOTCOUNT_LIMIT + /* * Serial console configuration */ @@ -65,7 +67,8 @@ #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=fc000000.flash" #define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ - "256k(env)," \ + "128k(env1)," \ + "128k(env2)," \ "128k(hwinfo)," \ "1M(nvramsim)," \ "128k(dtb)," \ @@ -73,7 +76,9 @@ "128k(sysinfo)," \ "7552k(root)," \ "4M(app)," \ - "13568k(data)" + "5376k(data)," \ + "8M(install)" + #define CONFIG_LZO /* needed for UBI */ #define CONFIG_RBTREE /* needed for UBI */ #define CONFIG_CMD_MTDPARTS @@ -367,7 +372,7 @@ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock7 " \ + "mtdargs=setenv bootargs root=/dev/mtdblock8 " \ "rootfstype=squashfs,jffs2\0" \ "addhost=setenv bootargs ${bootargs} " \ "hostname=${hostname}\0" \ @@ -376,22 +381,32 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} " \ "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty addhost;" \ + "flash_nfs=run nfsargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_mtd=run mtdargs addip addtty addhost;" \ + "flash_mtd=run mtdargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty addhost;" \ + "flash_self=run ramargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty addhost;" \ + "run nfsargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ "/u-boot-img.bin\0" \ - "update=protect off fc000000 fc07ffff; " \ + "update=protect off fc000000 fc07ffff;" \ "era fc000000 fc07ffff;" \ "cp.b ${loadaddr} fc000000 ${filesize}\0" \ "upd=run load;run update\0" \ + "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;" \ + "run mtdargs addip addtty addmtd addhost;" \ + "fdt addr 1800000;fdt boardsetup;fdt chosen;" \ + "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000" \ + "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;" \ + "erase fc200000 fc6fffff;" \ + "cp.b 1000000 fc200000 ${filesize}" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_mtd" diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index e0a87f8bc4..eae5a19f2a 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -171,44 +171,6 @@ "run mmcboot;" \ "run nandboot;" -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET - -/* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" - -/* USB Device Firmware Update support */ -#define CONFIG_DFU_FUNCTION -#define CONFIG_DFU_MMC -#define CONFIG_CMD_DFU -#define DFU_ALT_INFO_MMC \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "MLO fat 0 1;" \ - "MLO.raw mmc 100 100;" \ - "u-boot.img.raw mmc 300 400;" \ - "spl-os-args.raw mmc 80 80;" \ - "spl-os-image.raw mmc 900 2000;" \ - "spl-os-args fat 0 1;" \ - "spl-os-image fat 0 1;" \ - "u-boot.img fat 0 1;" \ - "uEnv.txt fat 0 1" -#ifdef CONFIG_NAND -#define CONFIG_DFU_NAND -#define DFU_ALT_INFO_NAND \ - "SPL part 0 1;" \ - "SPL.backup1 part 0 2;" \ - "SPL.backup2 part 0 3;" \ - "SPL.backup3 part 0 4;" \ - "u-boot part 0 5;" \ - "u-boot-spl-os part 0 6;" \ - "kernel part 0 8;" \ - "rootfs part 0 9" -#endif - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ @@ -228,17 +190,26 @@ /* SPL */ #ifndef CONFIG_NOR_BOOT #define CONFIG_SPL_YMODEM_SUPPORT + +/* CPSW support */ +#define CONFIG_SPL_ETH_SUPPORT + +/* USB gadget RNDIS */ +#define CONFIG_SPL_MUSB_NEW_SUPPORT + +/* General network SPL, both CPSW and USB gadget RNDIS */ #define CONFIG_SPL_NET_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -#define CONFIG_SPL_ETH_SUPPORT + +/* SPI flash. */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SPL_MUSB_NEW_SUPPORT + #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #ifdef CONFIG_NAND @@ -274,13 +245,19 @@ #endif /* - * USB configuration + * USB configuration. We enable MUSB support, both for host and for + * gadget. We set USB0 as peripheral and USB1 as host, based on the + * board schematic and physical port wired to each. Then for host we + * add mass storage support and for gadget we add both RNDIS ethernet + * and DFU. */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT #define CONFIG_MUSB_GADGET #define CONFIG_MUSB_PIO_ONLY #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_MUSB_HOST @@ -298,6 +275,11 @@ #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" + +/* USB TI's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_MUSB_GADGET */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) @@ -309,6 +291,35 @@ #undef CONFIG_SPL_ETH_SUPPORT #endif +/* USB Device Firmware Update support */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_CMD_DFU +#define DFU_ALT_INFO_MMC \ + "boot part 0 1;" \ + "rootfs part 0 2;" \ + "MLO fat 0 1;" \ + "MLO.raw mmc 100 100;" \ + "u-boot.img.raw mmc 300 400;" \ + "spl-os-args.raw mmc 80 80;" \ + "spl-os-image.raw mmc 900 2000;" \ + "spl-os-args fat 0 1;" \ + "spl-os-image fat 0 1;" \ + "u-boot.img fat 0 1;" \ + "uEnv.txt fat 0 1" +#ifdef CONFIG_NAND +#define CONFIG_DFU_NAND +#define DFU_ALT_INFO_NAND \ + "SPL part 0 1;" \ + "SPL.backup1 part 0 2;" \ + "SPL.backup2 part 0 3;" \ + "SPL.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "u-boot-spl-os part 0 6;" \ + "kernel part 0 8;" \ + "rootfs part 0 9" +#endif + /* * Default to using SPI for environment, etc. * 0x000000 - 0x020000 : SPL (128KiB) diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 2aea55567d..fc4ecec7ad 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -13,6 +13,8 @@ #include <asm/hardware.h> +#define CONFIG_SYS_TEXT_BASE 0x73f00000 + #define CONFIG_AT91_LEGACY #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index be8a28c327..28a79258df 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -122,6 +122,9 @@ #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 #define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 + +#define CONFIG_CMD_NAND_TRIMFFS + #endif #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 2b1533c85a..4a2ac9aabd 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -11,6 +11,8 @@ #include <asm/hardware.h> +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ @@ -121,7 +123,8 @@ #define CONFIG_ATMEL_NAND_HW_PMECC 1 #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 + +#define CONFIG_CMD_NAND_TRIMFFS #define CONFIG_MTD_DEVICE #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 7d8227503a..5b3aac7954 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -206,8 +206,8 @@ #ifdef CONFIG_SYS_I2C_SOFT #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8 -#define CONFIG_SYS_SOFT_I2C_SPEED 50000 -#define CONFIG_SYS_SOFT_I2C_SLAVE 0xFE +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE #endif /* diff --git a/include/configs/calimain.h b/include/configs/calimain.h index c76bc2cbe6..d20074c731 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -185,7 +185,6 @@ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_EMAC_MDIO_PHY_NUM 1 #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 0f3f61a0d5..ac7ed812d6 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -49,7 +49,6 @@ #define CONFIG_EMAC_MDIO_PHY_NUM 0 #define CONFIG_SYS_EMAC_TI_CLKDIV 0xa9 /* 1MHz */ #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c0591c5277..c3fb80c8d0 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -42,7 +42,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 9407eaf74b..3e71ae5a3e 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -74,7 +74,6 @@ */ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 3c0aacdd56..e63d7c4ab6 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -227,7 +227,6 @@ */ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 145e7ac926..bdf012b2b8 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -21,9 +21,6 @@ #include "tegra114-common.h" -/* Must be off for Dalmore to boot !?!? FIXME */ -#define CONFIG_SYS_DCACHE_OFF - /* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ #define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore #define CONFIG_OF_CONTROL diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index e3084d3754..82dc1a2579 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -44,7 +44,6 @@ /* Network Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 3c430ae0e0..7f57877752 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -69,7 +69,6 @@ extern unsigned int davinci_arm_clk_get(void); /* Network & Ethernet Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 6526478a96..a49a9891d4 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -87,7 +87,6 @@ /*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 29b10dd167..1595bc7f63 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -56,7 +56,6 @@ /*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 34a64b301a..6ebbe818a5 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -50,7 +50,6 @@ /* Network & Ethernet Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index d35aea7ee5..3eaa7c0840 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -88,7 +88,6 @@ /*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 17391cddc9..68e5246b6d 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.03" +#define CONFIG_IDENT_STRING " dlvision-10g 0.05" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -123,9 +123,15 @@ #define CONFIG_SYS_FPGA_COUNT 2 +#define CONFIG_SYS_FPGA_PTR { \ + (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \ + (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE } + +#define CONFIG_SYS_FPGA_COMMON + #define CONFIG_SYS_LATCH0_RESET 0xffff #define CONFIG_SYS_LATCH0_BOOT 0xffff -#define CONFIG_SYS_LATCH1_RESET 0xffcf +#define CONFIG_SYS_LATCH1_RESET 0xffbf #define CONFIG_SYS_LATCH1_BOOT 0xffff #define CONFIG_SYS_FPGA_NO_RFL_HI @@ -145,7 +151,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 27471284ac..2f8d6b4c90 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvision -#define CONFIG_IDENT_STRING " dlvision 0.01" +#define CONFIG_IDENT_STRING " dlvision 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ @@ -109,7 +109,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 58786ffa91..4fbe768cbc 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -26,21 +26,19 @@ #include <configs/omap5_common.h> /* CPSW Ethernet */ -#define CONFIG_CMD_NET +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ #define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI -#define CONFIG_PHY_GIGE +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ +#define CONFIG_PHY_GIGE /* per-board part of CPSW */ #define CONFIG_PHYLIB #define CONFIG_PHY_ADDR 2 diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h new file mode 100644 index 0000000000..cd553ec55b --- /dev/null +++ b/include/configs/dxr2.h @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_DXR2_H +#define __CONFIG_DXR2_H + +#define CONFIG_SIEMENS_DXR2 +#define MACH_TYPE_DXR2 4315 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DXR2 + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 275 +#define DXR2_IOCTRL_VAL 0x18b +#define DDR_PLL_FREQ 266 +#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K + +#define BOARD_DFU_BUTTON_GPIO 27 +#define BOARD_DFU_BUTTON_LED 64 + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=dxr2\0" \ + "nand_img_size=0x300000\0" \ + "optargs=\0" \ + CONFIG_COMMON_ENV_SETTINGS + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"if ping ${serverip}; then " \ + "run net_nfs; " \ +"fi;" \ +"run nand_boot;" + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_DXR2_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 14a8db3bb8..e08423a097 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -89,7 +89,6 @@ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_EMAC_MDIO_PHY_NUM 0 #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 247e37b6dd..ccc7bd0a8a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x21f00000 #endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ +#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000 #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 @@ -123,41 +124,40 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING -#define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE #define CONFIG_CMD_USB #define CONFIG_CMD_FAT - +#define CONFIG_CMD_UBI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_UBIFS #define CONFIG_SYS_LONGHELP /* - * Filesystems + * MTD defines */ -#define CONFIG_JFFS2_NAND 1 +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_LZO -#ifndef CONFIG_JFFS2_CMDLINE -#define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_OFFSET 0 -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#else -#define MTDIDS_DEFAULT "nor0=0,nand0=1" +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" #define MTDPARTS_DEFAULT "mtdparts=" \ - "0:" \ - "384k(U-Boot)," \ - "128k(Env)," \ - "128k(Splash)," \ - "4M(Kernel)," \ - "-(FS)" \ + "physmap-flash.0:" \ + "512k(U-Boot)," \ + "128k(Env)," \ + "128k(Splash)," \ + "4M(Kernel)," \ + "384k(MiniFS)," \ + "-(FS)" \ ";" \ - "1:" \ - "-(jffs2)" -#endif /* CONFIG_JFFS2_CMDLINE */ - + "atmel_nand:" \ + "1M(emergency)," \ + "-(data)" /* * Hardware drivers */ @@ -328,7 +328,7 @@ #define CONFIG_BOOTDELAY 5 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000) #define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */ #define CONFIG_BAUDRATE 115200 @@ -347,12 +347,14 @@ "displayheight=512\0" \ "displaybsteps=1023\0" \ "ubootaddr=10000000\0" \ - "splashimage=10080000\0" \ - "kerneladdr=100A0000\0" \ + "splashimage=100A0000\0" \ + "kerneladdr=100C0000\0" \ "kernelsize=00400000\0" \ - "rootfsaddr=104A0000\0" \ + "rootfsaddr=10520000\0" \ "copy_addr=21200000\0" \ - "rootfssize=00B60000\0" \ + "rootfssize=00AE0000\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ "bootargsdefaults=set bootargs " \ "console=ttyS0,115200 " \ "video=vcxk_fb:xres:${displaywidth}," \ @@ -373,15 +375,15 @@ "erase $(rootfsaddr) +$(rootfssize);" \ "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ "\0" \ - "update_uboot=protect off 10000000 1005FFFF;" \ + "update_uboot=protect off 10000000 1007FFFF;" \ "dhcp $(copy_addr) u-boot_eb_cpux9k2;" \ - "erase 10000000 1005FFFF;" \ + "erase 10000000 1007FFFF;" \ "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ - "protect on 10000000 1005FFFF;reset\0" \ + "protect on 10000000 1007FFFF;reset\0" \ "update_splash=protect off $(splashimage) +20000;" \ "dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \ "erase $(splashimage) +20000;" \ - "cp.b $(fileaddr) 10080000 $(filesize);" \ + "cp.b $(fileaddr) $(splashimage) $(filesize);" \ "protect on $(splashimage) +20000;reset\0" \ "emergency=run bootargsdefaults;" \ "set bootargs $(bootargs) root=initramfs boot=emergency " \ diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 43cf6bc441..90033fa10f 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -135,7 +135,6 @@ */ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 2b93a458cb..8c21909d63 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -23,7 +23,6 @@ #define CONFIG_DISPLAY_BOARDINFO /* Enable fdt support for Exynos5250 */ -#define CONFIG_ARCH_DEVICE_TREE exynos5250 #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 984f274512..47e65d8b72 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -360,10 +360,9 @@ #define CONFIG_CRC32_VERIFY 1 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_VERSION_VARIABLE 1 diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 2e478cc63c..b8197ac189 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -97,7 +97,6 @@ */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h index e08fc14b3a..3e18a657fa 100644 --- a/include/configs/igep0033.h +++ b/include/configs/igep0033.h @@ -174,7 +174,6 @@ /* Ethernet support */ #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 722c56652f..9982cf6e90 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -45,6 +45,7 @@ #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* * NS16550 Configuration diff --git a/include/configs/io.h b/include/configs/io.h index 33743e61ac..79ada68ac7 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME io -#define CONFIG_IDENT_STRING " io 0.05" +#define CONFIG_IDENT_STRING " io 0.06" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -123,7 +123,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ @@ -230,6 +229,11 @@ #define CONFIG_SYS_FPGA_COUNT 1 +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE } + +#define CONFIG_SYS_FPGA_COMMON + /* Memory Bank 3 (Latches) initialization */ #define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0xa2015480 diff --git a/include/configs/io64.h b/include/configs/io64.h index dcd1b82e25..f110b70602 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -498,6 +498,12 @@ #define CONFIG_SYS_FPGA_COUNT 2 +#define CONFIG_SYS_FPGA_PTR { \ + (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \ + (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE } + +#define CONFIG_SYS_FPGA_COMMON + #define CONFIG_SYS_LATCH0_RESET 0xffff #define CONFIG_SYS_LATCH0_BOOT 0xffff #define CONFIG_SYS_LATCH1_RESET 0xffbf diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 32d9050adb..ec9016a6d1 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME iocon -#define CONFIG_IDENT_STRING " iocon 0.04" +#define CONFIG_IDENT_STRING " iocon 0.05" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -63,6 +63,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_FPGAD #undef CONFIG_CMD_EEPROM /* @@ -100,23 +101,53 @@ #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 + +#define CONFIG_PCA953X /* NXP PCA9554 */ +#define CONFIG_PCA9698 /* NXP PCA9698 */ + /* * Software (bit-bang) I2C driver configuration */ +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F +#define I2C_SOFT_DECLARATIONS2 +#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F +#define I2C_SOFT_DECLARATIONS3 +#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F +#define I2C_SOFT_DECLARATIONS4 +#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F + +#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} #ifndef __ASSEMBLY__ -void fpga_gpio_set(int pin); -void fpga_gpio_clear(int pin); -int fpga_gpio_get(int pin); +void fpga_gpio_set(unsigned int bus, int pin); +void fpga_gpio_clear(unsigned int bus, int pin); +int fpga_gpio_get(unsigned int bus, int pin); #endif #define I2C_ACTIVE { } #define I2C_TRISTATE { } -#define I2C_READ fpga_gpio_get(0x0040) ? 1 : 0 -#define I2C_SDA(bit) if (bit) fpga_gpio_set(0x0040); \ - else fpga_gpio_clear(0x0040) -#define I2C_SCL(bit) if (bit) fpga_gpio_set(0x0020); \ - else fpga_gpio_clear(0x0020) +#define I2C_READ \ + (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0) +#define I2C_SDA(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \ + } while (0) +#define I2C_SCL(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ + } while (0) #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ /* @@ -141,7 +172,6 @@ int fpga_gpio_get(int pin); #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ @@ -236,6 +266,11 @@ int fpga_gpio_get(int pin); #define CONFIG_SYS_FPGA_COUNT 1 +#define CONFIG_SYS_MCLINK_MAX 3 + +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL } + /* Memory Bank 3 (Latches) initialization */ #define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0x02025080 @@ -251,6 +286,9 @@ int fpga_gpio_get(int pin); */ #define CONFIG_SYS_MPC92469AC #define CONFIG_SYS_CH7301 -#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT +#define CONFIG_SYS_OSD_SCREENS 1 + +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI #endif /* __CONFIG_H */ diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 2ec776174c..932dac36ad 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -95,7 +95,17 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_EXT2 -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET #define CONFIG_OF_LIBFDT 1 diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 85ae016e0c..5e27ab2e4c 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -409,7 +409,6 @@ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 87f3d132a8..0e3de777b2 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -18,7 +18,7 @@ /* Open Firmware DTS */ #define CONFIG_OF_CONTROL 1 #define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze +#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic /* linear and spi flash memory */ #ifdef XILINX_FLASH_START diff --git a/include/configs/mxs.h b/include/configs/mxs.h index a684166502..124dc1e6cb 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -119,11 +119,16 @@ /* GPIO */ #define CONFIG_MXS_GPIO -/* DUART Serial Driver */ +/* + * DUART Serial Driver. + * Conflicts with AUART driver which can be set by board. + */ +#ifndef CONFIG_MXS_AUART #define CONFIG_PL011_SERIAL #define CONFIG_PL011_CLOCK 24000000 #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } #define CONFIG_CONS_INDEX 0 +#endif /* Default baudrate can be overriden by board! */ #ifndef CONFIG_BAUDRATE #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/neo.h b/include/configs/neo.h index 5abb8b1a75..ccbb1fa9b1 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -19,7 +19,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME neo -#define CONFIG_IDENT_STRING " neo 0.01" +#define CONFIG_IDENT_STRING " neo 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -130,7 +130,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ @@ -222,6 +221,11 @@ #define CONFIG_SYS_FPGA_COUNT 1 +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE } + +#define CONFIG_SYS_FPGA_COMMON + /* Memory Bank 3 (Latches) initialization */ #define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0x92015480 diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index 3da78b6575..f40e0b718f 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -17,6 +17,7 @@ * High Level Configuration Options */ #define CONFIG_4430SDP 1 /* working with SDP */ +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP #include <configs/omap4_common.h> diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index 8e82fed234..98ba559c86 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -28,9 +28,12 @@ /* Use General purpose timer 1 */ #define CONFIG_SYS_TIMERBASE GPT2_BASE +/* + * For the DDR timing information we can either dynamically determine + * the timings to use or use pre-determined timings (based on using the + * dynamic method. Default to the static timing infomation. + */ #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS @@ -127,9 +130,15 @@ "fi" -/* Defines for SPL */ -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ +/* + * SPL related defines. The Public RAM memory map the ROM defines the + * area between 0x40300000 and 0x4031E000 as a download area for OMAP5 + * (dra7xx is larger, but we do not need to be larger at this time). We + * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and + * print some information. + */ +#define CONFIG_SPL_TEXT_BASE 0x40300000 +#define CONFIG_SPL_MAX_SIZE (0x4031E000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index d10c2b56f9..0d1c43c2eb 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -17,6 +17,8 @@ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" +#include <configs/omap5_common.h> + #define CONFIG_CONS_INDEX 3 #define CONFIG_SYS_NS16550_COM3 UART3_BASE #define CONFIG_BAUDRATE 115200 @@ -35,14 +37,36 @@ #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART +/* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X #define CONFIG_CMD_TCA642X #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 +/* USB UHH support options */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 +#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 + +/* Enabled commands */ +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ + +/* USB Networking options */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX + #define CONSOLEDEV "ttyO2" -#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 -#include <configs/omap5_common.h> +/* Max time to hold reset on this board, see doc/README.omap-reset-time */ +#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 #endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 1b0be23dd3..5f0c4fb254 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -34,7 +34,7 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif -#if defined(CONFIG_P1020RDB) +#if defined(CONFIG_P1020RDB_PC) #define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 @@ -50,6 +50,35 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif +/* + * P1020RDB-PD board has user selectable switches for evaluating different + * frequency and boot options for the P1020 device. The table that + * follow describe the available options. The front six binary number was in + * accordance with SW3[1:6]. + * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off + * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off + * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off + * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off + * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off + * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off + * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off + */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_BOARDNAME "P1020RDB-PD" +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_P1020 +#define CONFIG_SPI_FLASH +#define CONFIG_VSC7385_ENET +#define CONFIG_SLIC +#define __SW_BOOT_MASK 0x03 +#define __SW_BOOT_NOR 0x64 +#define __SW_BOOT_SPI 0x34 +#define __SW_BOOT_SD 0x24 +#define __SW_BOOT_NAND 0x44 +#define __SW_BOOT_PCIE 0x74 +#define CONFIG_SYS_L2_SIZE (256 << 10) +#endif + #if defined(CONFIG_P1021RDB) #define CONFIG_BOARDNAME "P1021RDB-PC" #define CONFIG_NAND_FSL_ELBC @@ -143,7 +172,6 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -259,7 +287,7 @@ #define SPD_EEPROM_ADDRESS 0x52 #undef CONFIG_FSL_DDR_INTERACTIVE -#ifdef CONFIG_P1020MBG +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G #define CONFIG_CHIP_SELECTS_PER_CTRL 2 #else @@ -330,7 +358,7 @@ /* * Local Bus Definitions */ -#if defined(CONFIG_P1020MBG) +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ #define CONFIG_SYS_FLASH_BASE 0xec000000 #elif defined(CONFIG_P1020UTM) @@ -381,13 +409,27 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#else #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) +#endif #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) +#else #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -395,6 +437,7 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) +#endif #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h new file mode 100644 index 0000000000..4aa706422e --- /dev/null +++ b/include/configs/p1_twr.h @@ -0,0 +1,619 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * QorIQ P1 Tower boards configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#if defined(CONFIG_TWR_P1025) +#define CONFIG_BOARDNAME "TWR-P1025" +#define CONFIG_P1025 +#define CONFIG_PHY_ATHEROS +#define CONFIG_QE +#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Conversion of LBC addr */ +#define CONFIG_SYS_LBC_LCRR 0x80000002 /* LB clock ratio reg */ +#endif + +#ifdef CONFIG_SDCARD +#define CONFIG_RAMBOOT_SDCARD +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 +#define CONFIG_MPC85xx + +#define CONFIG_MP + +#define CONFIG_FSL_ELBC +#define CONFIG_PCI +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_CMD_SATA +#define CONFIG_SATA_SIL3114 +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_LIBATA +#define CONFIG_LBA48 + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for TWR-P1025 */ + +#define CONFIG_DDR_CLK_FREQ 66666666 + +#define CONFIG_HWCONFIG +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x1fffffff +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR + +/* DDR Setup */ +#define CONFIG_FSL_DDR3 + +#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +/* Default settings for DDR3 */ +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f +#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 +#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 +#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 +#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 + +#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef +#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 +#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 +#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 + +#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 +#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655a608 +#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 +#define CONFIG_SYS_DDR_RCW_1 0x00000000 +#define CONFIG_SYS_DDR_RCW_2 0x00000000 +#define CONFIG_SYS_DDR_CONTROL 0xc70c0000 /* Type = DDR3 */ +#define CONFIG_SYS_DDR_CONTROL_2 0x04401050 +#define CONFIG_SYS_DDR_TIMING_4 0x00220001 +#define CONFIG_SYS_DDR_TIMING_5 0x03402400 + +#define CONFIG_SYS_DDR_TIMING_3 0x00020000 +#define CONFIG_SYS_DDR_TIMING_0 0x00220004 +#define CONFIG_SYS_DDR_TIMING_1 0x5c5b6544 +#define CONFIG_SYS_DDR_TIMING_2 0x0fa880de +#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 +#define CONFIG_SYS_DDR_MODE_1 0x80461320 +#define CONFIG_SYS_DDR_MODE_2 0x00008000 +#define CONFIG_SYS_DDR_INTERVAL 0x09480000 + +/* + * Memory map + * + * 0x0000_0000 0x1fff_ffff DDR Up to 512MB cacheable + * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) + * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable + * + * Localbus + * 0xe000_0000 0xe002_0000 SSD1289 128K non-cacheable + * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable + * + * 0xff90_0000 0xff97_ffff L2 SRAM Up to 512K cacheable + * 0xffd0_0000 0xffd0_3fff init ram 16K Cacheable + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 + +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \ + | BR_PS_16 | BR_V) + +#define CONFIG_FLASH_OR_PRELIM 0xfc0000b1 + +#define CONFIG_SYS_SSD_BASE 0xe0000000 +#define CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SSD_BASE +#define CONFIG_SSD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_SSD_BASE_PHYS) | \ + BR_PS_16 | BR_V) +#define CONFIG_SSD_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ + OR_GPCM_ACS_DIV2 | OR_GPCM_SCY | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CONFIG_SYS_BR2_PRELIM CONFIG_SSD_BR_PRELIM +#define CONFIG_SYS_OR2_PRELIM CONFIG_SSD_OR_PRELIM + +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 +/* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +/* Size of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024)/* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ + +/* Serial Port + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +#define CONFIG_SYS_64BIT_VSPRINTF +#define CONFIG_SYS_64BIT_STRTOUL + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C spd and slave address */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 + +/* + * I2C2 EEPROM + */ +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C spd and slave address */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 + +#define CONFIG_SYS_I2C_PCA9555_ADDR 0x23 + +/* enable read and write access to EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#if defined(CONFIG_PCI) +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "TWR-ELEV PCIe SLOT" +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#undef CONFIG_TSEC2 +#undef CONFIG_TSEC2_NAME +#define CONFIG_TSEC3 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#undef CONFIG_HAS_ETH2 +#endif /* CONFIG_TSEC_ENET */ + +#ifdef CONFIG_QE +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#endif /* CONFIG_QE */ + +#ifdef CONFIG_TWR_P1025 +/* + * QE UEC ethernet configuration + */ +#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) + +#undef CONFIG_UEC_ETH +#define CONFIG_PHY_MODE_NEED_CHANGE + +#define CONFIG_UEC_ETH1 /* ETH1 */ +#define CONFIG_HAS_ETH0 + +#ifdef CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 0x18 /* 0x18 for MII */ +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 +#endif /* CONFIG_UEC_ETH1 */ + +#define CONFIG_UEC_ETH5 /* ETH5 */ +#define CONFIG_HAS_ETH1 + +#ifdef CONFIG_UEC_ETH5 +#define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ +#define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ +#define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC5_PHY_ADDR 0x19 /* 0x19 for RMII */ +#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 +#endif /* CONFIG_UEC_ETH5 */ +#endif /* CONFIG_TWR-P1025 */ + +/* + * Environment + */ +#ifdef CONFIG_SYS_RAMBOOT +#ifdef CONFIG_RAMBOOT_SDCARD +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#endif +#else +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB + +#if defined(CONFIG_HAS_FSL_DR_USB) +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_STORAGE +#endif +#endif + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ + || defined(CONFIG_FSL_SATA) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ +"netdev=eth0\0" \ +"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ +"loadaddr=1000000\0" \ +"bootfile=uImage\0" \ +"dtbfile=twr-p1025twr.dtb\0" \ +"ramdiskfile=rootfs.ext2.gz.uboot\0" \ +"qefirmwarefile=fsl_qe_ucode_1021_10_A.bin\0" \ +"tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ + "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ +"kernelflash=tftpboot $loadaddr $bootfile; " \ + "protect off 0xefa80000 +$filesize; " \ + "erase 0xefa80000 +$filesize; " \ + "cp.b $loadaddr 0xefa80000 $filesize; " \ + "protect on 0xefa80000 +$filesize; " \ + "cmp.b $loadaddr 0xefa80000 $filesize\0" \ +"dtbflash=tftpboot $loadaddr $dtbfile; " \ + "protect off 0xefe80000 +$filesize; " \ + "erase 0xefe80000 +$filesize; " \ + "cp.b $loadaddr 0xefe80000 $filesize; " \ + "protect on 0xefe80000 +$filesize; " \ + "cmp.b $loadaddr 0xefe80000 $filesize\0" \ +"ramdiskflash=tftpboot $loadaddr $ramdiskfile; " \ + "protect off 0xeeb80000 +$filesize; " \ + "erase 0xeeb80000 +$filesize; " \ + "cp.b $loadaddr 0xeeb80000 $filesize; " \ + "protect on 0xeeb80000 +$filesize; " \ + "cmp.b $loadaddr 0xeeb80000 $filesize\0" \ +"qefirmwareflash=tftpboot $loadaddr $qefirmwarefile; " \ + "protect off 0xefec0000 +$filesize; " \ + "erase 0xefec0000 +$filesize; " \ + "cp.b $loadaddr 0xefec0000 $filesize; " \ + "protect on 0xefec0000 +$filesize; " \ + "cmp.b $loadaddr 0xefec0000 $filesize\0" \ +"consoledev=ttyS0\0" \ +"ramdiskaddr=2000000\0" \ +"ramdiskfile=rootfs.ext2.gz.uboot\0" \ +"fdtaddr=c00000\0" \ +"bdev=sda1\0" \ +"norbootaddr=ef080000\0" \ +"norfdtaddr=ef040000\0" \ +"ramdisk_size=120000\0" \ +"usbboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 " \ +"console=$consoledev,$baudrate $othbootargs ; bootm 0xefa80000 - 0xefe80000" + +#define CONFIG_NFSBOOTCOMMAND \ +"setenv bootargs root=/dev/nfs rw " \ +"nfsroot=$serverip:$rootpath " \ +"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"tftp $loadaddr $bootfile&&" \ +"tftp $fdtaddr $fdtfile&&" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_HDBOOT \ +"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"usb start;" \ +"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ +"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_USB_FAT_BOOT \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"usb start;" \ +"fatload usb 0:2 $loadaddr $bootfile;" \ +"fatload usb 0:2 $fdtaddr $fdtfile;" \ +"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_USB_EXT2_BOOT \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"usb start;" \ +"ext2load usb 0:4 $loadaddr $bootfile;" \ +"ext2load usb 0:4 $fdtaddr $fdtfile;" \ +"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_NORBOOT \ +"setenv bootargs root=/dev/mtdblock3 rw " \ +"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ +"bootm $norbootaddr - $norfdtaddr" + +#define CONFIG_RAMBOOTCOMMAND_TFTP \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"tftp $ramdiskaddr $ramdiskfile;" \ +"tftp $loadaddr $bootfile;" \ +"tftp $fdtaddr $fdtfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"bootm 0xefa80000 0xeeb80000 0xefe80000" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index d4d4d791cf..e2b4de7414 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -289,7 +289,6 @@ #define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h new file mode 100644 index 0000000000..20b0f9ab4d --- /dev/null +++ b/include/configs/pxm2.h @@ -0,0 +1,153 @@ +/* + * siemens pxm2 + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PXM2_H +#define __CONFIG_PXM2_H + +#define CONFIG_SIEMENS_PXM2 +#define MACH_TYPE_PXM2 4309 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2 + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 720 +#define DXR2_IOCTRL_VAL 0x18b +#define DDR_PLL_FREQ 266 + +#define BOARD_DFU_BUTTON_GPIO 59 +#define BOARD_DFU_BUTTON_LED 117 +#define BOARD_LCD_POWER 111 +#define BOARD_BACK_LIGHT 112 +#define BOARD_TOUCH_POWER 57 + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 + + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_ATHEROS + +#define CONFIG_FACTORYSET + +/* UBI Support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=pxm2\0" \ + "nand_img_size=0x500000\0" \ + "optargs=\0" \ + CONFIG_COMMON_ENV_SETTINGS \ + "mmc_dev=0\0" \ + "mmc_root=/dev/mmcblk0p2 rw\0" \ + "mmc_root_fs_type=ext4 rootwait\0" \ + "mmc_load_uimage=" \ + "mmc rescan; " \ + "setenv bootfile uImage;" \ + "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ + "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "mmc_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootargs ${bootargs} " \ + "root=${mmc_root} ${mtdparts}" \ + "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ + "eth=${ethaddr} " \ + "\0" \ + "mmc_boot=run mmc_args; " \ + "run mmc_load_uimage; " \ + "bootm ${kloadaddr}\0" \ + "" + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ + "if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ + "fi; " \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmc_dev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmc_load_uimage; then " \ + "run mmc_args;" \ + "bootm ${kloadaddr};" \ + "fi;" \ + "fi;" \ + "run nand_boot;" \ + "if ping ${serverip}; then " \ + "run net_nfs; " \ + "fi; " + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ + +#define CONFIG_VIDEO +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CMD_BMP +#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE +#define PWM_TICKS 0x1388 +#define PWM_DUTY 0x200 +#endif + +#endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/rut.h b/include/configs/rut.h new file mode 100644 index 0000000000..7c94644de8 --- /dev/null +++ b/include/configs/rut.h @@ -0,0 +1,156 @@ +/* + * siemens rut + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_RUT_H +#define __CONFIG_RUT_H + +#define CONFIG_SIEMENS_RUT +#define MACH_TYPE_RUT 4316 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_RUT + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 600 +#define RUT_IOCTRL_VAL 0x18b +#define DDR_PLL_FREQ 303 + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#define CONFIG_PHY_ADDR 1 +#define CONFIG_PHY_NATSEMI + +#define CONFIG_FACTORYSET + +/* UBI Support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Watchdog */ +#define WATCHDOG_TRIGGER_GPIO 14 + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=rut\0" \ + "splashpos=488,352\0" \ + "optargs=fixrtc --no-log consoleblank=0 \0" \ + CONFIG_COMMON_ENV_SETTINGS \ + "mmc_dev=0\0" \ + "mmc_root=/dev/mmcblk0p2 rw\0" \ + "mmc_root_fs_type=ext4 rootwait\0" \ + "mmc_load_uimage=" \ + "mmc rescan; " \ + "setenv bootfile uImage;" \ + "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ + "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "mmc_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootargs ${bootargs} " \ + "root=${mmc_root} ${mtdparts}" \ + "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ + "eth=${ethaddr} " \ + "\0" \ + "mmc_boot=run mmc_args; " \ + "run mmc_load_uimage; " \ + "bootm ${kloadaddr}\0" \ + "" + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmc_dev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmc_load_uimage; then " \ + "run mmc_args;" \ + "bootm ${kloadaddr};" \ + "fi;" \ + "fi;" \ + "run nand_boot;" \ + "if ping ${serverip}; then " \ + "run net_nfs; " \ + "fi; " + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif + +#endif /* CONFIG_SPL_BUILD */ + +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_HW_WATCHDOG +#endif + +#define CONFIG_VIDEO +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CMD_BMP +#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE + +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI + +#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ +#define CONFIG_ARCH_EARLY_INIT_R +#define CONFIG_FORMIKE +#endif + +#endif /* ! __CONFIG_RUT_H */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 10697d627a..76fa500edd 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -56,7 +56,6 @@ #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 24 #define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO #define CONFIG_SYS_WHITE_ON_BLACK @@ -112,7 +111,6 @@ #define CONFIG_CMD_NAND #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_MAX_CHIPS 1 #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 @@ -126,16 +124,19 @@ #define CONFIG_ATMEL_NAND_HW_PMECC #define CONFIG_PMECC_CAP 4 #define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512 #define CONFIG_CMD_NAND_TRIMFFS #endif /* Ethernet Hardware */ #define CONFIG_MACB #define CONFIG_RMII -#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY +#define CONFIG_RGMII +#define CONFIG_CMD_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 /* MMC */ #define CONFIG_CMD_MMC @@ -195,7 +196,7 @@ "bootm 0x22000000 - 0x21000000" #define CONFIG_SYS_MMC_ENV_DEV 0 #else -#define CONIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h new file mode 100644 index 0000000000..5426ee8720 --- /dev/null +++ b/include/configs/siemens-am33x-common.h @@ -0,0 +1,461 @@ +/* + * siemens am33x common board options + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_SIEMENS_AM33X_COMMON_H +#define __CONFIG_SIEMENS_AM33X_COMMON_H + +#define CONFIG_AM33XX +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +#include <asm/arch/omap.h> + +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (0x2000) +#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_SYS_NO_FLASH +#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CACHE + +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#ifndef CONFIG_SPL_BUILD +#define CONFIG_ROOTPATH "/opt/eldk" +#endif + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_AUTOLOAD "yes" + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 32 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * memtest works on 8 MB in DRAM after skipping 32MB from + * start addr of ram disk + */ +#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + + (8 * 1024 * 1024)) + +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI +#define CONFIG_MTD_DEVICE +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED (75000000) + + /* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + /* Platform/Board specific defs */ +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SERIAL_MULTI +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x44e09000 +#define CONFIG_SYS_NS16550_COM4 0x481a6000 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SERIAL1 1 +#define CONFIG_CONS_INDEX 1 + +/* I2C Configuration */ +#define CONFIG_I2C +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_DRIVER_OMAP24XX_I2C + + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_FS_FAT +#define CONFIG_SPL_I2C_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT + +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_ECCSTEPS 4 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* + * Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#ifndef CONFIG_SPL_BUILD +/* + * USB configuration + */ +#define CONFIG_USB_MUSB_DSPS +#define CONFIG_ARCH_MISC_INIT +#define CONFIG_MUSB_GADGET +#define CONFIG_MUSB_PIO_ONLY +#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_MUSB_HOST + +#define CONFIG_AM335X_USB0 +#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST +#ifdef CONFIG_MUSB_HOST +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#endif + +#ifdef CONFIG_MUSB_GADGET +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" +#endif /* CONFIG_MUSB_GADGET */ + +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET + +/* USB TI's IDs */ +#define CONFIG_USBD_HS +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0x4a47 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" + +/* USB Device Firmware Update support */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_NAND +#define CONFIG_CMD_DFU +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) + +#endif /* CONFIG_SPL_BUILD */ + +/* + * Default to using SPI for environment, etc. We have multiple copies + * of SPL as the ROM will check these locations. + * 0x0 - 0x20000 : First copy of SPL + * 0x20000 - 0x40000 : Second copy of SPL + * 0x40000 - 0x60000 : Third copy of SPL + * 0x60000 - 0x80000 : Fourth copy of SPL + * 0x80000 - 0xDF000 : U-Boot + * 0xDF000 - 0xE0000 : U-Boot Environment + * 0xE0000 - 0x442000 : Linux Kernel + * 0x442000 - 0x800000 : Userland + */ +#if defined(CONFIG_SPI_BOOT) +# undef CONFIG_ENV_IS_NOWHERE +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ +# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ +#endif /* SPI support */ + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_CMD_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI + +#define CONFIG_NAND +/* NAND support */ +#ifdef CONFIG_NAND +#define CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS + +#define MTDIDS_NAME_STR "omap2-nand.0" +#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR +#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \ + "128k(spl)," \ + "128k(spl.backup1)," \ + "128k(spl.backup2)," \ + "128k(spl.backup3)," \ + "1920k(u-boot)," \ + "128k(uboot.env)," \ + "5120k(kernel_a)," \ + "5120k(kernel_b)," \ + "8192k(mtdoops)," \ + "-(rootfs)" +/* + * chip-size = 256MiB + *| name | size | address area | + *------------------------------------------------------- + *| spl | 128.000 KiB | 0x 0..0x 1ffff | + *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | + *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | + *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | + *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | + *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | + *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | + *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | + *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | + *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | + *------------------------------------------------------- + */ + +#define DFU_ALT_INFO_NAND \ + "spl part 0 1;" \ + "spl.backup1 part 0 2;" \ + "spl.backup2 part 0 3;" \ + "spl.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "u-boot.env part 0 6;" \ + "kernel_a part 0 7;" \ + "kernel_b part 0 8;" \ + "rootfs partubi 0 10" + +#define CONFIG_COMMON_ENV_SETTINGS \ + "verify=no \0" \ + "project_dir=systemone\0" \ + "loadaddr=0x82000000\0" \ + "kloadaddr=0x81000000\0" \ + "script_addr=0x81900000\0" \ + "console=console=ttyMTD,mtdoops console=ttyO0,115200n8\0" \ + "active_set=a\0" \ + "nand_active_ubi_vol=rootfs_a\0" \ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "nand_src_addr=0x280000\0" \ + "nand_src_addr_a=0x280000\0" \ + "nand_src_addr_b=0x780000\0" \ + "nfsopts=nolock rw mem=128M\0" \ + "ip_method=none\0" \ + "bootenv=uEnv.txt\0" \ + "bootargs_defaults=setenv bootargs " \ + "console=${console} " \ + "${optargs}\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv nand_active_ubi_vol rootfs_${active_set};" \ + "setenv ${active_set} true;" \ + "if test -n ${a}; then " \ + "setenv nand_src_addr ${nand_src_addr_a};" \ + "fi;" \ + "if test -n ${b}; then " \ + "setenv nand_src_addr ${nand_src_addr_b};" \ + "fi;" \ + "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ + "ubi.mtd=9,2048;" \ + "setenv bootargs ${bootargs} " \ + "root=${nand_root} noinitrd ${mtdparts} " \ + "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ + "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ + "=mtdoops\0" \ + "dfu_args=run bootargs_defaults;" \ + "setenv bootargs ${bootargs} ;" \ + "mtdparts default; " \ + "dfu nand 0; \0" \ + "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \ + "net_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootfile ${project_dir}/kernel/uImage;" \ + "setenv rootpath /home/projects/${project_dir}/rootfs;" \ + "setenv bootargs ${bootargs} " \ + "root=/dev/nfs ${mtdparts} " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ + "nand_boot=echo Booting from nand, active set ${active_set} ...; " \ + "run nand_args; " \ + "nand read.i ${kloadaddr} ${nand_src_addr} " \ + "${nand_img_size}; bootm ${kloadaddr}\0" \ + "net_nfs=echo Booting from network ...; " \ + "run net_args; " \ + "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ + "bootm ${kloadaddr}\0" \ + "flash_self=run nand_boot\0" \ + "flash_self_test=setenv bootargs_defaults ${bootargs_defaults} test; " \ + "run nand_boot\0" \ + "dfu_start=echo Preparing for dfu mode ...; " \ + "run dfu_args; \0" \ + "preboot=echo; "\ + "echo Type 'run flash_self' to use kernel and root " \ + "filesystem on memory; echo Type 'run flash_self_test' to " \ + "use kernel and root filesystem on memory, boot in test " \ + "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ + "from memory and root filesystem over NFS; echo Type " \ + "'run net_nfs' to get Kernel over TFTP and mount root " \ + "filesystem over NFS; echo Set active_set variable to 'a' " \ + "or 'b' to select kernel and rootfs partition; " \ + "echo" \ + "\0" + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND + devices */ +#if !defined(CONFIG_SPI_BOOT) +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#endif +#endif + +#define CONFIG_OMAP_GPIO + +/* Watchdog */ +#define CONFIG_HW_WATCHDOG + +/* Stop autoboot with ESC ESC key detected */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b" +#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ + "press \"<Esc><Esc>\" to stop\n", bootdelay + +#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index b5a7a9addc..06aeba61dd 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -11,6 +11,8 @@ /* * High level configuration */ +/* Virtual target or real hardware */ +#define CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_ARMV7 #define CONFIG_L2_OFF @@ -21,11 +23,12 @@ #define CONFIG_SINGLE_BOOTLOADER #define CONFIG_SOCFPGA +/* base address for .text section */ +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_SYS_TEXT_BASE 0x08000040 -#define V_NS16550_CLK 1000000 -#define CONFIG_BAUDRATE 57600 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_TIMER_CLOCK_KHZ 2400 +#else +#define CONFIG_SYS_TEXT_BASE 0x01000040 +#endif #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* Console I/O Buffer Size */ @@ -154,7 +157,7 @@ /* SDRAM Bank #1 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* SDRAM memory size */ -#define PHYS_SDRAM_1_SIZE 0x80000000 +#define PHYS_SDRAM_1_SIZE 0x40000000 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_START 0x00000000 @@ -170,8 +173,13 @@ #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_COM1 UART0_BASE - #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET +#define V_NS16550_CLK 1000000 +#else +#define V_NS16550_CLK 100000000 +#endif +#define CONFIG_BAUDRATE 115200 /* * FLASH @@ -184,9 +192,15 @@ /* This timer use eosc1 where the clock frequency is fixed * throughout any condition */ #define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS - /* reload value when timer count to zero */ #define TIMER_LOAD_VAL 0xFFFFFFFF +/* Timer info */ +#define CONFIG_SYS_HZ 1000 +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET +#define CONFIG_TIMER_CLOCK_KHZ 2400 +#else +#define CONFIG_TIMER_CLOCK_KHZ 25000 +#endif #define CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 1ed53dbbb1..3e82fc2558 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -7,24 +7,8 @@ /* * Corenet DS style board configuration file */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg -#endif - -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -/* Set 1M boot space */ -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_NO_FLASH -#endif +#ifndef __T4QDS_H +#define __T4QDS_H #define CONFIG_CMD_REGINFO @@ -34,7 +18,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE @@ -58,70 +41,16 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ -#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_SYS_NO_FLASH -#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_ENV_IS_NOWHERE -#endif -#else -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#endif - -#if defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_SDCARD) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) -#elif defined(CONFIG_NAND) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -#define CONFIG_ENV_IS_IN_REMOTE -#define CONFIG_ENV_ADDR 0xffe20000 -#define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_ENV_IS_NOWHERE) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -unsigned long get_board_ddr_clk(void); -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC #ifdef CONFIG_DDR_ECC #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xdeadbeef @@ -129,14 +58,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENABLE_36BIT_PHYS -#ifdef CONFIG_PHYS_64BIT #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ -#endif -#if 0 -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#endif #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST @@ -147,17 +71,8 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull -#endif - -/* EEPROM */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* * DDR Setup @@ -174,199 +89,16 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define CONFIG_FSL_DDR3 -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS1 0x51 -#define SPD_EEPROM_ADDRESS2 0x52 -#define SPD_EEPROM_ADDRESS3 0x53 -#define SPD_EEPROM_ADDRESS4 0x54 -#define SPD_EEPROM_ADDRESS5 0x55 -#define SPD_EEPROM_ADDRESS6 0x56 -#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ /* * IFC Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) -/* NOR Flash Timing Params */ -#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 - -#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ - FTIM0_NOR_TEADC(0x5) | \ - FTIM0_NOR_TEAHC(0x5)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1A) |\ - FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ - FTIM2_NOR_TWP(0x1c)) -#define CONFIG_SYS_NOR_FTIM3 0x0 - -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} - -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ -#define QIXIS_BASE 0xffdf0000 -#define QIXIS_LBMAP_SWITCH 6 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 0 -#define QIXIS_LBMAP_DFLTBANK 0x00 -#define QIXIS_LBMAP_ALTBANK 0x04 -#define QIXIS_RST_CTL_RESET 0x83 -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#ifdef CONFIG_PHYS_64BIT -#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) -#else -#define QIXIS_BASE_PHYS QIXIS_BASE -#endif - -#define CONFIG_SYS_CSPR3_EXT (0xf) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_GPCM \ - | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024) -#define CONFIG_SYS_CSOR3 0x0 -/* QIXIS Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ - FTIM0_GPCM_TEADC(0x0e) | \ - FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ - FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ - FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS3_FTIM3 0x0 - -/* NAND Flash on IFC */ -#define CONFIG_NAND_FSL_IFC -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#define CONFIG_SYS_NAND_CSPR_EXT (0xf) -#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ - | CSPR_MSEL_NAND /* MSEL = NAND */ \ - | CSPR_V) -#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) - -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ - | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ - | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ - -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* ONFI NAND Flash mode0 Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ - FTIM0_NAND_TWP(0x18) | \ - FTIM0_NAND_TWCHT(0x07) | \ - FTIM0_NAND_TWH(0x0a)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ - FTIM1_NAND_TWBE(0x39) | \ - FTIM1_NAND_TRR(0x0e) | \ - FTIM1_NAND_TRP(0x18)) -#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ - FTIM2_NAND_TREH(0x0a) | \ - FTIM2_NAND_TWHRE(0x1e)) -#define CONFIG_SYS_NAND_FTIM3 0x0 - -#define CONFIG_SYS_NAND_DDR_LAW 11 - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND - -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -#if defined(CONFIG_NAND) -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 -#else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 -#endif -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_SYS_RAMBOOT -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ #define CONFIG_MISC_INIT_R @@ -376,18 +108,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 /* The assembler doesn't like typecast */ #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ @@ -431,149 +157,55 @@ unsigned long get_board_ddr_clk(void); /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 100000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ -#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ - -#define I2C_MUX_CH_DEFAULT 0x8 -#define I2C_MUX_CH_VOL_MONITOR 0xa -#define I2C_MUX_CH_VSC3316_FS 0xc -#define I2C_MUX_CH_VSC3316_BS 0xd - -/* Voltage monitor on channel 2*/ -#define I2C_VOL_MONITOR_ADDR 0x40 -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 - -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR -#define VSC3316_FSM_TX_ADDR 0x70 -#define VSC3316_FSM_RX_ADDR 0x71 - /* * RapidIO */ #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 -#endif #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull -#else -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 -#endif #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* - * for slave u-boot IMAGE instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull -/* - * for slave UCODE and ENV instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ - -/* slave core release by master*/ -#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 -#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ - -/* - * SRIO_PCIE_BOOT - SLAVE - */ -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) -#endif -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SST -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE 0 - -/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 -#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 -#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, Slot 2, tgtid 2, Base address 201000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 -#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 1, Base address 202000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 -#endif #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull -#else -#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 -#endif #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ /* controller 4, Base address 203000 */ @@ -584,84 +216,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ -/* Qman/Bman */ -#ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 50 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_NUM_PORTALS 50 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 - -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_DPAA_PME -#define CONFIG_SYS_PMAN -#define CONFIG_SYS_DPAA_DCE -#define CONFIG_SYS_INTERLAKEN - -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. - */ -#define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) -#elif defined(CONFIG_NAND) -#define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) -#endif /* CONFIG_NOBQFMAN */ - -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET -#define CONFIG_PHYLIB_10G -#define CONFIG_PHY_VITESSE -#define CONFIG_PHY_TERANETICS -#define SGMII_CARD_PORT1_PHY_ADDR 0x1C -#define SGMII_CARD_PORT2_PHY_ADDR 0x1D -#define SGMII_CARD_PORT3_PHY_ADDR 0x1E -#define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define FM1_10GEC1_PHY_ADDR 0x0 -#define FM1_10GEC2_PHY_ADDR 0x1 -#define FM2_10GEC1_PHY_ADDR 0x2 -#define FM2_10GEC2_PHY_ADDR 0x3 -#endif - #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_NET_MULTI @@ -724,30 +278,6 @@ unsigned long get_board_ddr_clk(void); #endif /* -* USB -*/ -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 -#define CONFIG_HAS_FSL_DR_USB - -#define CONFIG_MMC - -#ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -788,112 +318,11 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 -#define __USB_PHY_TYPE utmi - -/* - * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be - * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to - * cacheline interleaving. It can be cacheline, page, bank, superbank. - * See doc/README.fsl-ddr for details. - */ -#ifdef CONFIG_PPC_T4240 -#define CTRL_INTLV_PREFERED 3way_4KB -#else -#define CTRL_INTLV_PREFERED cacheline -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:" \ - "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ - "bank_intlv=auto;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot && " \ - "protect off $ubootaddr +$filesize && " \ - "erase $ubootaddr +$filesize && " \ - "cp.b $loadaddr $ubootaddr $filesize && " \ - "protect on $ubootaddr +$filesize && " \ - "cmp.b $loadaddr $ubootaddr $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=t4240qds/ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=t4240qds/t4240qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" - -/* For emulation this causes u-boot to jump to the start of the proof point - app code automatically */ -#define CONFIG_PROOF_POINTS \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x29000000 - - -;" \ - "cpu 2 release 0x29000000 - - -;" \ - "cpu 3 release 0x29000000 - - -;" \ - "cpu 4 release 0x29000000 - - -;" \ - "cpu 5 release 0x29000000 - - -;" \ - "cpu 6 release 0x29000000 - - -;" \ - "cpu 7 release 0x29000000 - - -;" \ - "go 0x29000000" - #define CONFIG_HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_ALU \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x01000000 - - -;" \ - "cpu 2 release 0x01000000 - - -;" \ - "cpu 3 release 0x01000000 - - -;" \ - "cpu 4 release 0x01000000 - - -;" \ - "cpu 5 release 0x01000000 - - -;" \ - "cpu 6 release 0x01000000 - - -;" \ - "cpu 7 release 0x01000000 - - -;" \ - "go 0x01000000" - -#define CONFIG_LINUX \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_LINUX - -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index c215f0b925..60dd8ff11a 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -215,7 +215,6 @@ #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII #define CONFIG_EMAC_MDIO_PHY_NUM 0 -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index ccd68a19fd..ba6c6bb9f5 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -17,8 +17,6 @@ #define CONFIG_TEGRA /* which is a Tegra generic machine */ #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - #include <asm/arch/tegra.h> /* get chip and board defs */ /* @@ -135,6 +133,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_ENTERRCM #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* Defines for SPL */ #define CONFIG_SPL diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 44e98e5019..c3de9a999e 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -18,6 +18,9 @@ #define _TEGRA114_COMMON_H_ #include "tegra-common.h" +/* Cortex-A15 uses a cache line size of 64 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* * NS16550 Configuration */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index d5e9ee4062..b009a316b1 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -9,6 +9,9 @@ #define _TEGRA20_COMMON_H_ #include "tegra-common.h" +/* Cortex-A9 uses a cache line size of 32 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 32 + /* * Errata configuration */ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 5ac8816504..99acbfd28b 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -9,6 +9,9 @@ #define _TEGRA30_COMMON_H_ #include "tegra-common.h" +/* Cortex-A9 uses a cache line size of 32 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 32 + /* * Errata configuration */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index dfc4c756db..2fc2c10676 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -226,7 +226,6 @@ #define CONFIG_CMD_MII #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index fd3ffab015..d2e34aeed4 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -28,23 +28,27 @@ #define CONFIG_SYS_NS16550_CLK 48000000 /* Network defines. */ -#define CONFIG_CMD_NET +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ #define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ -/* SPL defines. */ +/* + * SPL related defines. The Public RAM memory map the ROM defines the + * area between 0x402F0400 and 0x4030B800 as a download area and + * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also + * supports X-MODEM loading via UART, and we leverage this and then use + * Y-MODEM to load u-boot.img, when booted over UART. + */ #define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) /* * Since SPL did pll and ddr initialization for us, diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index e0ab6912ba..e89e8744df 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -60,12 +60,12 @@ /* I2C IP block */ #define CONFIG_I2C -#define CONFIG_CMD_I2C #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 #define CONFIG_I2C_MULTI_BUS #define CONFIG_DRIVER_OMAP24XX_I2C +#define CONFIG_CMD_I2C /* MMC/SD IP block */ #define CONFIG_MMC @@ -87,10 +87,10 @@ * access CS0 at is 0x8000000. */ #ifdef CONFIG_NAND -#define CONFIG_CMD_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_NAND_BASE 0x8000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_CMD_NAND #endif /* @@ -103,14 +103,18 @@ * console baudrate of 115200 and use the default baud rate table. */ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_BAUDRATE 115200 +#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ +#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ + +/* As stated above, the following choices are optional. */ +#define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_PROMPT "U-Boot# " #define CONFIG_VERSION_VARIABLE -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_BAUDRATE 115200 /* We set the max number of command args high to avoid HUSH bugs. */ #define CONFIG_SYS_MAXARGS 64 @@ -123,9 +127,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_CONSOLE_INFO_QUIET - /* * When we have SPI, NOR or NAND flash we expect to be making use of * mtdparts, both for ease of use in U-Boot and for passing information @@ -141,7 +142,8 @@ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH * prior to this include, in order to skip a few commands. When we do * have flash, if we expect these commands they must be enabled in that - * config. + * config. If desired, a specific list of desired commands can be used + * instead. */ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV @@ -223,14 +225,14 @@ #endif #ifdef CONFIG_MMC +#define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_FAT_SUPPORT #endif -/* General parts of the framework. */ +/* General parts of the framework, required. */ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT diff --git a/include/configs/trats.h b/include/configs/trats.h index 9b6aac96e6..24ea06b927 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -263,6 +263,9 @@ #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ #define CONFIG_SYS_I2C_SOFT_SPEED 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE +#define I2C_SOFT_DECLARATIONS2 +#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F #define CONFIG_SOFT_I2C_READ_REPEATED_START #define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_I2C_MULTI_BUS diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 79fa5bb53f..b9f381f645 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -72,6 +72,15 @@ # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #endif +#define CONFIG_ZYNQ_SPI + +/* SPI */ +#ifdef CONFIG_ZYNQ_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_SST +# define CONFIG_CMD_SF +#endif + /* Enable the PL to be downloaded */ #define CONFIG_FPGA #define CONFIG_FPGA_XILINX diff --git a/include/dfu.h b/include/dfu.h index 6c7d227137..47b90559d5 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -47,6 +47,8 @@ struct nand_internal_data { unsigned int dev; unsigned int part; + /* for nand/ubi use */ + unsigned int ubi; }; static inline unsigned int get_mmc_blk_size(int dev) @@ -109,6 +111,8 @@ const char *dfu_get_dev_type(enum dfu_device_type t); const char *dfu_get_layout(enum dfu_layout l); struct dfu_entity *dfu_get_entity(int alt); char *dfu_extract_token(char** e, int *n); +void dfu_trigger_reset(void); +bool dfu_reset(void); int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num); diff --git a/include/e500.h b/include/e500.h index 0ff8e89a1e..0c2432657b 100644 --- a/include/e500.h +++ b/include/e500.h @@ -10,19 +10,19 @@ typedef struct { - unsigned long freqProcessor[CONFIG_MAX_CPUS]; - unsigned long freqSystemBus; - unsigned long freqDDRBus; - unsigned long freqLocalBus; - unsigned long freqQE; + unsigned long freq_processor[CONFIG_MAX_CPUS]; + unsigned long freq_systembus; + unsigned long freq_ddrbus; + unsigned long freq_localbus; + unsigned long freq_qe; #ifdef CONFIG_SYS_DPAA_FMAN - unsigned long freqFMan[CONFIG_SYS_NUM_FMAN]; + unsigned long freq_fman[CONFIG_SYS_NUM_FMAN]; #endif #ifdef CONFIG_SYS_DPAA_QBMAN - unsigned long freqQMAN; + unsigned long freq_qman; #endif #ifdef CONFIG_SYS_DPAA_PME - unsigned long freqPME; + unsigned long freq_pme; #endif } MPC85xx_SYS_INFO; diff --git a/include/edid.h b/include/edid.h index f153091f64..480a773d0f 100644 --- a/include/edid.h +++ b/include/edid.h @@ -54,7 +54,7 @@ struct edid_detailed_timing { (_x).vertical_blanking) unsigned char hsync_offset; unsigned char hsync_pulse_width; - unsigned char sync_offset_pulse_width; + unsigned char vsync_offset_pulse_width; unsigned char hsync_vsync_offset_pulse_width_hi; #define EDID_DETAILED_TIMING_HSYNC_OFFSET(_x) \ ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 7, 6) << 8) + \ diff --git a/include/elf.h b/include/elf.h index 29f276d3f0..b8ecc41063 100644 --- a/include/elf.h +++ b/include/elf.h @@ -2,27 +2,7 @@ * Copyright (c) 1995, 1996, 2001, 2002 * Erik Theisen. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ /* diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 2c97398f4e..89bcbd1700 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -182,5 +182,6 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd); static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; } static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {} #endif /* CONFIG_FSL_ESDHC */ +void __noreturn mmc_boot(void); #endif /* __FSL_ESDHC_H__ */ diff --git a/include/fsl_usb.h b/include/fsl_usb.h new file mode 100644 index 0000000000..915774cba8 --- /dev/null +++ b/include/fsl_usb.h @@ -0,0 +1,64 @@ +/* + * Freescale USB Controller + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_FSL_USB_H_ +#define _ASM_FSL_USB_H_ + +#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +struct ccsr_usb_port_ctrl { + u32 ctrl; + u32 drvvbuscfg; + u32 pwrfltcfg; + u32 sts; + u8 res_14[0xc]; + u32 bistcfg; + u32 biststs; + u32 abistcfg; + u32 abiststs; + u8 res_30[0x10]; + u32 xcvrprg; + u32 anaprg; + u32 anadrv; + u32 anasts; +}; + +struct ccsr_usb_phy { + u32 id; + struct ccsr_usb_port_ctrl port1; + u8 res_50[0xc]; + u32 tvr; + u32 pllprg[4]; + u8 res_70[0x4]; + u32 anaccfg; + u32 dbg; + u8 res_7c[0x4]; + struct ccsr_usb_port_ctrl port2; + u8 res_dc[0x334]; +}; + +#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG1_PHY_DIV (1 << 0) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN (1 << 13) +#define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV (1 << 4) +#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) +#define CONFIG_SYS_FSL_USB_SYS_CLK_VALID (1 << 0) +#else +struct ccsr_usb_phy { + u8 res0[0x18]; + u32 usb_enable_override; + u8 res[0xe4]; +}; +#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 +#endif + +#endif /*_ASM_FSL_USB_H_ */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 0a8268cbb5..f50e0e2733 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -19,6 +19,23 @@ enum { int get_fpga_state(unsigned dev); void print_fpga_state(unsigned dev); +int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data); +int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data); + +extern struct ihs_fpga *fpga_ptr[]; + +#define FPGA_SET_REG(ix, fld, val) \ + fpga_set_reg((ix), \ + &fpga_ptr[ix]->fld, \ + offsetof(struct ihs_fpga, fld), \ + val) + +#define FPGA_GET_REG(ix, fld, val) \ + fpga_get_reg((ix), \ + &fpga_ptr[ix]->fld, \ + offsetof(struct ihs_fpga, fld), \ + val) + struct ihs_gpio { u16 read; u16 clear; @@ -67,6 +84,19 @@ struct ihs_fpga { #endif #ifdef CONFIG_IO64 + +struct ihs_fpga_channel { + u16 status_int; + u16 config_int; + u16 switch_connect_config; + u16 tx_destination; +}; + +struct ihs_fpga_hicb { + u16 status_int; + u16 config_int; +}; + struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ @@ -75,12 +105,9 @@ struct ihs_fpga { u16 reserved_0[5]; /* 0x0008 */ u16 quad_serdes_reset; /* 0x0012 */ u16 reserved_1[502]; /* 0x0014 */ - u16 ch0_status_int; /* 0x0400 */ - u16 ch0_config_int; /* 0x0402 */ - u16 reserved_2[126]; /* 0x0404 */ - u16 ch0_hicb_status_int;/* 0x0500 */ - u16 ch0_hicb_config_int;/* 0x0502 */ - u16 reserved_3[7549]; /* 0x0504 */ + struct ihs_fpga_channel ch[32]; /* 0x0400 */ + struct ihs_fpga_channel hicb_ch[32]; /* 0x0500 */ + u16 reserved_2[7487]; /* 0x0580 */ u16 reflection_high; /* 0x3ffe */ }; #endif @@ -96,11 +123,22 @@ struct ihs_fpga { u16 mpc3w_control; /* 0x001a */ u16 reserved_1[19]; /* 0x001c */ u16 videocontrol; /* 0x0042 */ - u16 reserved_2[93]; /* 0x0044 */ + u16 reserved_2[14]; /* 0x0044 */ + u16 mc_int; /* 0x0060 */ + u16 mc_int_en; /* 0x0062 */ + u16 mc_status; /* 0x0064 */ + u16 mc_control; /* 0x0066 */ + u16 mc_tx_data; /* 0x0068 */ + u16 mc_tx_address; /* 0x006a */ + u16 mc_tx_cmd; /* 0x006c */ + u16 mc_res; /* 0x006e */ + u16 mc_rx_cmd_status; /* 0x0070 */ + u16 mc_rx_data; /* 0x0072 */ + u16 reserved_3[69]; /* 0x0074 */ u16 reflection_high; /* 0x00fe */ struct ihs_osd osd; /* 0x0100 */ - u16 reserved_3[889]; /* 0x010e */ - u16 videomem; /* 0x0800 */ + u16 reserved_4[889]; /* 0x010e */ + u16 videomem[31736]; /* 0x0800 */ }; #endif @@ -121,7 +159,7 @@ struct ihs_fpga { u16 reserved_4[176]; /* 0x00a0 */ struct ihs_osd osd; /* 0x0200 */ u16 reserved_5[761]; /* 0x020e */ - u16 videomem; /* 0x0800 */ + u16 videomem[31736]; /* 0x0800 */ }; #endif diff --git a/include/i2c.h b/include/i2c.h index d8674efe58..8fd17d190a 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -390,7 +390,7 @@ unsigned int i2c_get_bus_speed(void); # if !defined(CONFIG_SYS_MAX_I2C_BUS) # define CONFIG_SYS_MAX_I2C_BUS 2 # endif -# define I2C_MULTI_BUS 0 +# define I2C_MULTI_BUS 1 #else # define CONFIG_SYS_MAX_I2C_BUS 1 # define I2C_MULTI_BUS 0 diff --git a/include/image.h b/include/image.h index f93a39389a..ee6eb8d246 100644 --- a/include/image.h +++ b/include/image.h @@ -212,6 +212,7 @@ struct lmb; #define IH_TYPE_AISIMAGE 13 /* TI Davinci AIS Image */ #define IH_TYPE_KERNEL_NOLOAD 14 /* OS Kernel Image, can run from any load address */ #define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ +#define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ /* * Compression Types diff --git a/include/linux/compat.h b/include/linux/compat.h index e1338bf489..3fdfb399b5 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -3,6 +3,14 @@ #define ndelay(x) udelay(1) +#define dev_dbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define dev_vdbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define dev_info(dev, fmt, args...) \ + printf(fmt, ##args) +#define dev_err(dev, fmt, args...) \ + printf(fmt, ##args) #define printk printf #define KERN_EMERG diff --git a/include/miiphy.h b/include/miiphy.h index ca5040ed8d..657b49624a 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -1,27 +1,8 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -| -| Additions (C) Copyright 2009 Industrie Dial Face S.p.A. -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * + * Additions (C) Copyright 2009 Industrie Dial Face S.p.A. + */ /*----------------------------------------------------------------------------+ | | File Name: miiphy.h diff --git a/include/mpc86xx.h b/include/mpc86xx.h index 31e83f2cc9..9fe4748032 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -41,9 +41,9 @@ #ifndef __ASSEMBLY__ typedef struct { - unsigned long freqProcessor; - unsigned long freqSystemBus; - unsigned long freqLocalBus; + unsigned long freq_processor; + unsigned long freq_systembus; + unsigned long freq_localbus; } MPC86xx_SYS_INFO; #define l1icache_enable icache_enable diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 5198ecd404..048b4773fc 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -167,5 +167,19 @@ extern int cfi_flash_num_flash_banks; void flash_write_cmd(flash_info_t * info, flash_sect_t sect, uint offset, u32 cmd); +phys_addr_t cfi_flash_bank_addr(int i); +unsigned long cfi_flash_bank_size(int i); +void flash_cmd_reset(flash_info_t *info); + +#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +void flash_write8(u8 value, void *addr); +void flash_write16(u16 value, void *addr); +void flash_write32(u32 value, void *addr); +void flash_write64(u64 value, void *addr); +u8 flash_read8(void *addr); +u16 flash_read16(void *addr); +u32 flash_read32(void *addr); +u64 flash_read64(void *addr); +#endif #endif /* __CFI_FLASH_H__ */ diff --git a/include/net.h b/include/net.h index 7673470046..5aedc17aa6 100644 --- a/include/net.h +++ b/include/net.h @@ -357,7 +357,7 @@ struct icmp_hdr { } echo; ulong gateway; struct { - ushort __unused; + ushort unused; ushort mtu; } frag; uchar data[0]; diff --git a/include/pci.h b/include/pci.h index 01002a430c..911ba89ac3 100644 --- a/include/pci.h +++ b/include/pci.h @@ -410,13 +410,6 @@ #define PCI_MAX_PCI_DEVICES 32 #define PCI_MAX_PCI_FUNCTIONS 8 -#define PCI_DCR 0x54 /* PCIe Device Control Register */ -#define PCI_DSR 0x56 /* PCIe Device Status Register */ -#define PCI_LSR 0x5e /* PCIe Link Status Register */ -#define PCI_LCR 0x5c /* PCIe Link Control Register */ -#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ -#define PCI_LTSSM_L0 0x16 /* L0 state */ - /* Include the ID list */ #include <pci_ids.h> diff --git a/include/serial.h b/include/serial.h index f6bb2b90a1..d232d470a3 100644 --- a/include/serial.h +++ b/include/serial.h @@ -26,7 +26,7 @@ extern struct serial_device serial_smc_device; extern struct serial_device serial_scc_device; extern struct serial_device *default_serial_console(void); -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) || \ defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ diff --git a/include/stdio_dev.h b/include/stdio_dev.h index d0b5593e5b..e6dc12ac39 100644 --- a/include/stdio_dev.h +++ b/include/stdio_dev.h @@ -83,9 +83,6 @@ struct list_head* stdio_get_list(void); struct stdio_dev* stdio_get_by_name(const char* name); struct stdio_dev* stdio_clone(struct stdio_dev *dev); -#ifdef CONFIG_ARM_DCC -int drv_arm_dcc_init(void); -#endif #ifdef CONFIG_LCD int drv_lcd_init (void); #endif diff --git a/include/usb/mv_udc.h b/include/usb/mv_udc.h index c7696e6a3e..c71516cf6d 100644 --- a/include/usb/mv_udc.h +++ b/include/usb/mv_udc.h @@ -14,39 +14,19 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -/* Endpoint 0 states */ -#define EP0_IDLE 0 -#define EP0_IN_DATA 1 -#define EP0_OUT_DATA 2 -#define EP0_XFER_COMPLETE 3 +#include "../../drivers/usb/host/ehci.h" +#define NUM_ENDPOINTS 6 /* Endpoint parameters */ #define MAX_ENDPOINTS 4 -#define EP_MAX_PACKET_SIZE 0x200 +#define EP_MAX_PACKET_SIZE 0x200 #define EP0_MAX_PACKET_SIZE 64 -#define UDC_OUT_ENDPOINT 0x02 -#define UDC_OUT_PACKET_SIZE EP_MAX_PACKET_SIZE -#define UDC_IN_ENDPOINT 0x01 -#define UDC_IN_PACKET_SIZE EP_MAX_PACKET_SIZE -#define UDC_INT_ENDPOINT 0x05 -#define UDC_INT_PACKET_SIZE EP_MAX_PACKET_SIZE -#define UDC_BULK_PACKET_SIZE EP_MAX_PACKET_SIZE - -#define NUM_ENDPOINTS 6 -#define REQ_COUNT 12 -struct mv_ep { - struct usb_ep ep; - struct usb_request req; - struct list_head queue; - const struct usb_endpoint_descriptor *desc; -}; struct mv_udc { - u32 pad0[80]; #define MICRO_8FRAME 0x8 -#define USBCMD_ITC(x) (((x > 0xff) ? 0xff : x) << 16) +#define USBCMD_ITC(x) ((((x) > 0xff) ? 0xff : x) << 16) #define USBCMD_FS2 (1 << 15) #define USBCMD_RST (1 << 1) #define USBCMD_RUN (1) @@ -62,37 +42,52 @@ struct mv_udc { u32 epinitaddr; /* 0x158 */ u32 pad2[10]; #define PTS_ENABLE 2 -#define PTS(x) ((x & 0x3) << 30) +#define PTS(x) (((x) & 0x3) << 30) #define PFSC (1 << 24) u32 portsc; /* 0x184 */ u32 pad3[8]; #define USBMODE_DEVICE 2 u32 usbmode; /* 0x1a8 */ u32 epstat; /* 0x1ac */ -#define EPT_TX(x) (1 << ((x & 0xffff) + 16)) -#define EPT_RX(x) (1 << (x & 0xffff)) +#define EPT_TX(x) (1 << (((x) & 0xffff) + 16)) +#define EPT_RX(x) (1 << ((x) & 0xffff)) u32 epprime; /* 0x1b0 */ u32 epflush; /* 0x1b4 */ u32 pad4; u32 epcomp; /* 0x1bc */ -#define CTRL_TXE (1 << 23) -#define CTRL_TXR (1 << 22) -#define CTRL_RXE (1 << 7) -#define CTRL_RXR (1 << 6) -#define CTRL_TXT_BULK (2 << 18) -#define CTRL_RXT_BULK (2 << 2) +#define CTRL_TXE (1 << 23) +#define CTRL_TXR (1 << 22) +#define CTRL_RXE (1 << 7) +#define CTRL_RXR (1 << 6) +#define CTRL_TXT_BULK (2 << 18) +#define CTRL_RXT_BULK (2 << 2) u32 epctrl[16]; /* 0x1c0 */ }; +struct mv_ep { + struct usb_ep ep; + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + + struct usb_request req; + uint8_t *b_buf; + uint32_t b_len; + uint8_t b_fast[64] __aligned(ARCH_DMA_MINALIGN); +}; + struct mv_drv { struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct mv_udc *udc; + struct usb_gadget_driver *driver; + struct ehci_ctrl *ctrl; + struct ept_queue_head *epts; + struct ept_queue_item *items[2 * NUM_ENDPOINTS]; + uint8_t *items_mem; + struct mv_ep ep[NUM_ENDPOINTS]; }; struct ept_queue_head { unsigned config; - unsigned current; /* read-only */ + unsigned current; /* read-only */ unsigned next; unsigned info; @@ -111,9 +106,9 @@ struct ept_queue_head { unsigned reserved_4; }; -#define CONFIG_MAX_PKT(n) ((n) << 16) -#define CONFIG_ZLT (1 << 29) /* stop on zero-len xfer */ -#define CONFIG_IOS (1 << 15) /* IRQ on setup */ +#define CONFIG_MAX_PKT(n) ((n) << 16) +#define CONFIG_ZLT (1 << 29) /* stop on zero-len xfer */ +#define CONFIG_IOS (1 << 15) /* IRQ on setup */ struct ept_queue_item { unsigned next; @@ -127,12 +122,11 @@ struct ept_queue_item { }; #define TERMINATE 1 -#define INFO_BYTES(n) ((n) << 16) -#define INFO_IOC (1 << 15) -#define INFO_ACTIVE (1 << 7) -#define INFO_HALTED (1 << 6) -#define INFO_BUFFER_ERROR (1 << 5) -#define INFO_TX_ERROR (1 << 3) - -extern int usb_lowlevel_init(int index, void **controller); +#define INFO_BYTES(n) ((n) << 16) +#define INFO_IOC (1 << 15) +#define INFO_ACTIVE (1 << 7) +#define INFO_HALTED (1 << 6) +#define INFO_BUFFER_ERROR (1 << 5) +#define INFO_TX_ERROR (1 << 3) + #endif /* __MV_UDC_H__ */ diff --git a/include/video.h b/include/video.h index f7e27f8477..0ff857bc9f 100644 --- a/include/video.h +++ b/include/video.h @@ -63,4 +63,8 @@ void video_position_cursor(unsigned col, unsigned row); /* Clear the display */ void video_clear(void); +#if defined(CONFIG_FORMIKE) +int kwh043st20_f01_spi_startup(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode); +#endif #endif diff --git a/include/video_font.h b/include/video_font.h index 7ef9519997..96b9edb0da 100644 --- a/include/video_font.h +++ b/include/video_font.h @@ -8,9 +8,10 @@ #ifndef _VIDEO_FONT_ #define _VIDEO_FONT_ -#define VIDEO_FONT_CHARS 256 -#define VIDEO_FONT_WIDTH 8 -#define VIDEO_FONT_HEIGHT 16 -#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) +#ifdef CONFIG_VIDEO_FONT_4X6 +#include <video_font_4x6.h> +#else +#include <video_font_data.h> +#endif #endif /* _VIDEO_FONT_ */ diff --git a/include/video_font_4x6.h b/include/video_font_4x6.h new file mode 100644 index 0000000000..d1778d5b5b --- /dev/null +++ b/include/video_font_4x6.h @@ -0,0 +1,2154 @@ + +/* Hand composed "Minuscule" 4x6 font, with binary data generated using + * Perl stub. + * + * Use 'perl -x mini_4x6.c < mini_4x6.c > new_version.c' to regenerate + * binary data. + * + * Created by Kenneth Albanowski. + * No rights reserved, released to the public domain. + * + * Version 1.0 + */ + +/* + +#!/usr/bin/perl -pn + +s{((0x)?[0-9a-fA-F]+)(.*\[([\*\ ]{4})\])}{ + + ($num,$pat,$bits) = ($1,$3,$4); + + $bits =~ s/([^\s0])|(.)/ defined($1) + 0 /ge; + + $num = ord(pack("B8", $bits)); + $num |= $num >> 4; + $num = sprintf("0x%.2x", $num); + + #print "$num,$pat,$bits\n"; + + $num . $pat; +}ge; + +__END__; +*/ + +/* Note: binary data consists of one byte for each row of each character top + to bottom, character 0 to character 255, six bytes per character. Each + byte contains the same four character bits in both nybbles. + MSBit to LSBit = left to right. + */ + +#ifndef _VIDEO_FONT_DATA_ +#define _VIDEO_FONT_DATA_ + +#define VIDEO_FONT_CHARS 256 +#define VIDEO_FONT_WIDTH 4 +#define VIDEO_FONT_HEIGHT 6 +#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) + +static unsigned char video_fontdata[VIDEO_FONT_SIZE] = { + + /*{*/ + /* Char 0: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 1: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 2: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 3: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 4: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 5: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 6: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 7: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 8: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 9: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 10: '' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 11: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 12: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 13: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 14: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 15: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 16: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 17: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 18: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 19: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 20: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 21: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 22: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 23: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 24: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 25: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 26: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 27: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 28: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 29: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 30: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 31: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 32: ' ' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 33: '!' */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 34: '"' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 35: '#' */ + 0xaa, /*= [* * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 36: '$' */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 37: '%' */ + 0xaa, /*= [* * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 38: '&' */ + 0x66, /*= [ ** ] */ + 0x99, /*= [* *] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0xdd, /*= [** *] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 39: ''' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 40: '(' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 41: ')' */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 42: '*' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 43: '+' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 44: ',' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 45: '-' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 46: '.' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 47: '/' */ + 0x00, /*= [ ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 48: '0' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 49: '1' */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 50: '2' */ + 0xcc, /*= [** ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 51: '3' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 52: '4' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 53: '5' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 54: '6' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 55: '7' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 56: '8' */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 57: '9' */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 58: ':' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 59: ';' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + /*}*/ + /*{*/ /* Char 60: '<' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 61: '=' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 62: '>' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 63: '?' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 64: '@' */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 65: 'A' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 66: 'B' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 67: 'C' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 68: 'D' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 69: 'E' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 70: 'F' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 71: 'G' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 72: 'H' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 73: 'I' */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 74: 'J' */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 75: 'K' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 76: 'L' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 77: 'M' */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 78: 'N' */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 79: 'O' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 80: 'P' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 81: 'Q' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 82: 'R' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 83: 'S' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 84: 'T' */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 85: 'U' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 86: 'V' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 87: 'W' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 88: 'X' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 89: 'Y' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 90: 'Z' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 91: '[' */ + 0x66, /*= [ ** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 92: '\' */ + 0x00, /*= [ ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 93: ']' */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 94: '^' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 95: '_' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 96: '`' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 97: 'a' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 98: 'b' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 99: 'c' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 100: 'd' */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 101: 'e' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 102: 'f' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 103: 'g' */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 104: 'h' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 105: 'i' */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 106: 'j' */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 107: 'k' */ + 0x00, /*= [ ] */ + 0x88, /*= [* ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 108: 'l' */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 109: 'm' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 110: 'n' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 111: 'o' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 112: 'p' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x88, /*= [* ] */ + /*}*/ + /*{*/ /* Char 113: 'q' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 114: 'r' */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 115: 's' */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 116: 't' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 117: 'u' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 118: 'v' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 119: 'w' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 120: 'x' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 121: 'y' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + /*}*/ + /*{*/ /* Char 122: 'z' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 123: '{' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 124: '|' */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 125: '}' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 126: '~' */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 127: '' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 128: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 129: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 130: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 131: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 132: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 133: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 134: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 135: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 136: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 137: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 138: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 139: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 140: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 141: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 142: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 143: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 144: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 145: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 146: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 147: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 148: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 149: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 150: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 151: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 152: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 153: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 154: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 155: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 156: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 157: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 158: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 159: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 160: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 161: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 162: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 163: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 164: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 165: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 166: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 167: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 168: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 169: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 170: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 171: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 172: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 173: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 174: */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 175: */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 176: */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 177: */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + /*}*/ + /*{*/ /* Char 178: */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + /*}*/ + /*{*/ /* Char 179: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 180: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 181: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 182: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 183: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 184: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 185: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 186: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 187: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 188: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 189: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 190: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 191: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 192: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 193: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 194: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 195: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 196: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 197: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 198: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 199: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 200: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 201: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 202: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 203: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 204: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 205: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 206: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 207: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 208: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 209: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 210: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 211: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 212: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 213: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 214: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 215: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 216: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 217: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 218: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 219: */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 220: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 221: */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + /*}*/ + /*{*/ /* Char 222: */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + /*}*/ + /*{*/ /* Char 223: */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 224: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 225: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 226: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 227: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 228: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 229: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 230: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 231: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 232: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 233: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 234: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 235: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 236: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 237: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 238: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 239: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 240: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 241: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 242: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 243: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 244: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 245: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 246: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 247: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 248: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 249: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 250: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 251: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 252: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 253: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 254: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 255: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ +}; + +#endif diff --git a/include/video_font_data.h b/include/video_font_data.h index 4e544f0d7f..346a162f56 100644 --- a/include/video_font_data.h +++ b/include/video_font_data.h @@ -8,7 +8,12 @@ #ifndef _VIDEO_FONT_DATA_ #define _VIDEO_FONT_DATA_ -static unsigned char video_fontdata[VIDEO_FONT_SIZE] = { +#define VIDEO_FONT_CHARS 256 +#define VIDEO_FONT_WIDTH 8 +#define VIDEO_FONT_HEIGHT 16 +#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) + +static unsigned char __maybe_unused video_fontdata[VIDEO_FONT_SIZE] = { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/include/zynqpl.h b/include/zynqpl.h index f8211cdba2..6107cbf3a5 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -20,12 +20,14 @@ extern int zynq_info(Xilinx_desc *desc); #define XILINX_ZYNQ_7020 0x7 #define XILINX_ZYNQ_7030 0xc #define XILINX_ZYNQ_7045 0x11 +#define XILINX_ZYNQ_7100 0x16 /* Device Image Sizes */ #define XILINX_XC7Z010_SIZE 16669920/8 #define XILINX_XC7Z020_SIZE 32364512/8 #define XILINX_XC7Z030_SIZE 47839328/8 #define XILINX_XC7Z045_SIZE 106571232/8 +#define XILINX_XC7Z100_SIZE 139330784/8 /* Descriptor Macros */ #define XILINX_XC7Z010_DESC(cookie) \ @@ -40,4 +42,7 @@ extern int zynq_info(Xilinx_desc *desc); #define XILINX_XC7Z045_DESC(cookie) \ { xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" } +#define XILINX_XC7Z100_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, "7z100" } + #endif /* _ZYNQPL_H_ */ diff --git a/lib/libfdt/fdt.c b/lib/libfdt/fdt.c index 154e9a4461..e146aba6eb 100644 --- a/lib/libfdt/fdt.c +++ b/lib/libfdt/fdt.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_empty_tree.c b/lib/libfdt/fdt_empty_tree.c index f72d13b1d1..ac6c1fb04f 100644 --- a/lib/libfdt/fdt_empty_tree.c +++ b/lib/libfdt/fdt_empty_tree.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2012 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_ro.c b/lib/libfdt/fdt_ro.c index b65f4e23ad..f2154e8370 100644 --- a/lib/libfdt/fdt_ro.c +++ b/lib/libfdt/fdt_ro.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c index aba6094841..6fa4f13073 100644 --- a/lib/libfdt/fdt_rw.c +++ b/lib/libfdt/fdt_rw.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_strerror.c b/lib/libfdt/fdt_strerror.c index 9b00c3a6e8..2f3cc243db 100644 --- a/lib/libfdt/fdt_strerror.c +++ b/lib/libfdt/fdt_strerror.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_sw.c b/lib/libfdt/fdt_sw.c index f422754de9..580b57024f 100644 --- a/lib/libfdt/fdt_sw.c +++ b/lib/libfdt/fdt_sw.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_wip.c b/lib/libfdt/fdt_wip.c index b9e3c4a742..3f2dfa573b 100644 --- a/lib/libfdt/fdt_wip.c +++ b/lib/libfdt/fdt_wip.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/libfdt_internal.h b/lib/libfdt/libfdt_internal.h index 381133ba81..13cbc9af2a 100644 --- a/lib/libfdt/libfdt_internal.h +++ b/lib/libfdt/libfdt_internal.h @@ -3,52 +3,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include <fdt.h> @@ -207,6 +207,8 @@ static int net_check_prereq(enum proto_t protocol); static int NetTryCount; +int __maybe_unused net_busy_flag; + /**********************************************************************/ static int on_bootfile(const char *name, const char *value, enum env_op op, @@ -342,6 +344,9 @@ int NetLoop(enum proto_t protocol) eth_init_state_only(bd); restart: +#ifdef CONFIG_USB_KEYBOARD + net_busy_flag = 0; +#endif net_set_state(NETLOOP_CONTINUE); /* @@ -454,6 +459,9 @@ restart: status_led_set(STATUS_LED_RED, STATUS_LED_ON); #endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */ #endif /* CONFIG_MII, ... */ +#ifdef CONFIG_USB_KEYBOARD + net_busy_flag = 1; +#endif /* * Main packet reception loop. Loop receiving packets until @@ -559,6 +567,9 @@ restart: } done: +#ifdef CONFIG_USB_KEYBOARD + net_busy_flag = 0; +#endif #ifdef CONFIG_CMD_TFTPPUT /* Clear out the handlers */ net_set_udp_handler(NULL); diff --git a/spl/Makefile b/spl/Makefile index 28ebc96060..174d0a7fc4 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -17,10 +17,22 @@ CONFIG_SPL_BUILD := y export CONFIG_SPL_BUILD +ifeq ($(CONFIG_TPL_BUILD),y) +export CONFIG_TPL_BUILD +SPL_BIN := u-boot-tpl +else +SPL_BIN := u-boot-spl +endif + include $(TOPDIR)/config.mk # We want the final binaries in this directory +ifeq ($(CONFIG_TPL_BUILD),y) +obj := $(OBJTREE)/tpl/ +SPLTREE := $(TPLTREE) +else obj := $(OBJTREE)/spl/ +endif HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(SRCTREE)/board/$(VENDOR)/common/Makefile),y,n) @@ -50,6 +62,9 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o endif ifeq ($(CPU),mpc85xx) LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o +ifdef CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o +endif endif ifeq ($(CPU),mpc86xx) LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o @@ -80,8 +95,10 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/libphy.o LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o +LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/libwatchdog.o ifneq ($(CONFIG_OMAP_COMMON),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o @@ -157,7 +174,7 @@ $(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin $(OBJTREE)/SPL : $(obj)u-boot-spl.bin depend $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@ -ALL-y += $(obj)u-boot-spl.bin +ALL-y += $(obj)$(SPL_BIN).bin ifdef CONFIG_SAMSUNG ALL-y += $(obj)$(BOARD)-spl.bin @@ -171,15 +188,15 @@ $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin endif -$(obj)u-boot-spl.bin: $(obj)u-boot-spl +$(obj)$(SPL_BIN).bin: $(obj)$(SPL_BIN) $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@ GEN_UBOOT = \ cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ - -Map u-boot-spl.map -o u-boot-spl + -Map $(SPL_BIN).map -o $(SPL_BIN) -$(obj)u-boot-spl: depend $(START) $(LIBS) $(obj)u-boot-spl.lds +$(obj)$(SPL_BIN): depend $(START) $(LIBS) $(obj)u-boot-spl.lds $(GEN_UBOOT) $(START): depend diff --git a/tools/Makefile b/tools/Makefile index b94119202c..c36cde2007 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -70,31 +70,33 @@ EXT_OBJ_FILES-y += lib/md5.o EXT_OBJ_FILES-y += lib/sha1.o # Source files located in the tools directory -OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o -OBJ_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo.o +NOPED_OBJ_FILES-y += aisimage.o NOPED_OBJ_FILES-y += default_image.o -NOPED_OBJ_FILES-y += proftool.o -OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o NOPED_OBJ_FILES-y += fit_image.o -OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o -OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o -OBJ_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes.o -NOPED_OBJ_FILES-y += aisimage.o -NOPED_OBJ_FILES-y += kwbimage.o -NOPED_OBJ_FILES-y += pblimage.o -NOPED_OBJ_FILES-y += imximage.o NOPED_OBJ_FILES-y += image-host.o -NOPED_OBJ_FILES-y += omapimage.o +NOPED_OBJ_FILES-y += imximage.o +NOPED_OBJ_FILES-y += kwbimage.o NOPED_OBJ_FILES-y += mkenvimage.o NOPED_OBJ_FILES-y += mkimage.o +NOPED_OBJ_FILES-y += mxsimage.o +NOPED_OBJ_FILES-y += omapimage.o +NOPED_OBJ_FILES-y += os_support.o +NOPED_OBJ_FILES-y += pblimage.o +NOPED_OBJ_FILES-y += proftool.o +NOPED_OBJ_FILES-y += ublimage.o +OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o +OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o +OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o +OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o +OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o OBJ_FILES-$(CONFIG_MX23) += mxsboot.o OBJ_FILES-$(CONFIG_MX28) += mxsboot.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o -NOPED_OBJ_FILES-y += os_support.o OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o -NOPED_OBJ_FILES-y += ublimage.o -OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o +OBJ_FILES-$(CONFIG_SMDK5250) += mkexynosspl.o +OBJ_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo.o +OBJ_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes.o # Don't build by default #ifeq ($(ARCH),ppc) @@ -154,6 +156,7 @@ NOPEDOBJS := $(addprefix $(obj),$(NOPED_OBJ_FILES-y)) # # Use native tools and options # Define __KERNEL_STRICT_NAMES to prevent typedef overlaps +# Define _GNU_SOURCE to obtain the getline prototype from stdio.h # HOSTCPPFLAGS = -include $(SRCTREE)/include/libfdt_env.h \ -idirafter $(SRCTREE)/include \ @@ -163,7 +166,8 @@ HOSTCPPFLAGS = -include $(SRCTREE)/include/libfdt_env.h \ -I $(SRCTREE)/tools \ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ -DUSE_HOSTCC \ - -D__KERNEL_STRICT_NAMES + -D__KERNEL_STRICT_NAMES \ + -D_GNU_SOURCE all: $(obj).depend $(BINS) $(LOGO-y) subdirs @@ -201,20 +205,21 @@ $(obj)mkenvimage$(SFX): $(obj)crc32.o $(obj)mkenvimage.o \ $(HOSTSTRIP) $@ $(obj)mkimage$(SFX): $(obj)aisimage.o \ + $(FIT_SIG_OBJS) \ $(obj)crc32.o \ $(obj)default_image.o \ $(obj)fit_image.o \ $(obj)image-fit.o \ - $(obj)image.o \ $(obj)image-host.o \ - $(FIT_SIG_OBJS) \ + $(obj)image.o \ $(obj)imximage.o \ $(obj)kwbimage.o \ - $(obj)pblimage.o \ $(obj)md5.o \ $(obj)mkimage.o \ - $(obj)os_support.o \ + $(obj)mxsimage.o \ $(obj)omapimage.o \ + $(obj)os_support.o \ + $(obj)pblimage.o \ $(obj)sha1.o \ $(obj)ublimage.o \ $(LIBFDT_OBJS) \ diff --git a/tools/aisimage.c b/tools/aisimage.c index cd89145867..980bf2e1a7 100644 --- a/tools/aisimage.c +++ b/tools/aisimage.c @@ -5,9 +5,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include "aisimage.h" #include <image.h> diff --git a/tools/bmp_logo.c b/tools/bmp_logo.c index b2ad3d5927..2247adcc82 100644 --- a/tools/bmp_logo.c +++ b/tools/bmp_logo.c @@ -179,7 +179,7 @@ int main (int argc, char *argv[]) printf("unsigned char bmp_logo_bitmap[] = {\n"); for (i=(b->height-1)*b->width; i>=0; i-=b->width) { for (x = 0; x < b->width; x++) { - b->data[(uint16_t) i + x] = (uint8_t) fgetc (fp) \ + b->data[i + x] = (uint8_t) fgetc(fp) + DEFAULT_CMAP_SIZE; } } diff --git a/tools/dtc-version.sh b/tools/dtc-version.sh new file mode 100755 index 0000000000..e8c94d390b --- /dev/null +++ b/tools/dtc-version.sh @@ -0,0 +1,20 @@ +#!/bin/sh +# +# dtc-version dtc-command +# +# Prints the dtc version of `dtc-command' in a canonical 4-digit form +# such as `0222' for binutils 2.22 +# + +dtc="$*" + +if [ ${#dtc} -eq 0 ]; then + echo "Error: No dtc command specified." + printf "Usage:\n\t$0 <dtc-command>\n" + exit 1 +fi + +MAJOR=$($dtc -v | head -1 | awk '{print $NF}' | cut -d . -f 1) +MINOR=$($dtc -v | head -1 | awk '{print $NF}' | cut -d . -f 2) + +printf "%02d%02d\\n" $MAJOR $MINOR diff --git a/tools/imximage.c b/tools/imximage.c index c8a9ad578b..c87669b985 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -9,13 +9,12 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "imximage.h" +#define UNDEFINED 0xFFFFFFFF + /* * Supported commands for configuration file */ @@ -23,6 +22,7 @@ static table_entry_t imximage_cmds[] = { {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, {CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", }, {CMD_DATA, "DATA", "Reg Write Data", }, + {CMD_CSF, "CSF", "Command Sequence File", }, {CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", }, {-1, "", "", }, }; @@ -31,7 +31,7 @@ static table_entry_t imximage_cmds[] = { * Supported Boot options for configuration file * this is needed to set the correct flash offset */ -static table_entry_t imximage_bootops[] = { +static table_entry_t imximage_boot_offset[] = { {FLASH_OFFSET_ONENAND, "onenand", "OneNAND Flash",}, {FLASH_OFFSET_NAND, "nand", "NAND Flash", }, {FLASH_OFFSET_NOR, "nor", "NOR Flash", }, @@ -42,6 +42,20 @@ static table_entry_t imximage_bootops[] = { }; /* + * Supported Boot options for configuration file + * this is needed to determine the initial load size + */ +static table_entry_t imximage_boot_loadsize[] = { + {FLASH_LOADSIZE_ONENAND, "onenand", "OneNAND Flash",}, + {FLASH_LOADSIZE_NAND, "nand", "NAND Flash", }, + {FLASH_LOADSIZE_NOR, "nor", "NOR Flash", }, + {FLASH_LOADSIZE_SATA, "sata", "SATA Disk", }, + {FLASH_LOADSIZE_SD, "sd", "SD Card", }, + {FLASH_LOADSIZE_SPI, "spi", "SPI Flash", }, + {-1, "", "Invalid", }, +}; + +/* * IMXIMAGE version definition for i.MX chips */ static table_entry_t imximage_versions[] = { @@ -52,12 +66,22 @@ static table_entry_t imximage_versions[] = { static struct imx_header imximage_header; static uint32_t imximage_version; +/* + * Image Vector Table Offset + * Initialized to a wrong not 4-bytes aligned address to + * check if it is was set by the cfg file. + */ +static uint32_t imximage_ivt_offset = UNDEFINED; +static uint32_t imximage_csf_size = UNDEFINED; +/* Initial Load Region Size */ +static uint32_t imximage_init_loadsize; static set_dcd_val_t set_dcd_val; static set_dcd_rst_t set_dcd_rst; static set_imx_hdr_t set_imx_hdr; static uint32_t max_dcd_entries; static uint32_t *header_size_ptr; +static uint32_t *csf_ptr; static uint32_t get_cfg_value(char *token, char *name, int linenr) { @@ -193,7 +217,8 @@ static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, /* Set magic number */ fhdr_v1->app_code_barker = APP_CODE_BARKER; - hdr_base = entry_point - sizeof(struct imx_header); + /* TODO: check i.MX image V1 handling, for now use 'old' style */ + hdr_base = entry_point - 4096; fhdr_v1->app_dest_ptr = hdr_base - flash_offset; fhdr_v1->app_code_jump_vector = entry_point; @@ -220,16 +245,18 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, fhdr_v2->entry = entry_point; fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0; - fhdr_v2->self = hdr_base = entry_point - sizeof(struct imx_header); - + hdr_base = entry_point - imximage_init_loadsize + + flash_offset; + fhdr_v2->self = hdr_base; fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table); fhdr_v2->boot_data_ptr = hdr_base + offsetof(imx_header_v2_t, boot_data); - hdr_v2->boot_data.start = hdr_base - flash_offset; + hdr_v2->boot_data.start = entry_point - imximage_init_loadsize; - /* Security feature are not supported */ fhdr_v2->csf = 0; + header_size_ptr = &hdr_v2->boot_data.size; + csf_ptr = &fhdr_v2->csf; } static void set_hdr_func(struct imx_header *imxhdr) @@ -306,6 +333,13 @@ static void print_hdr_v2(struct imx_header *imx_hdr) genimg_print_size(hdr_v2->boot_data.size); printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr); printf("Entry Point: %08x\n", (uint32_t)fhdr_v2->entry); + if (fhdr_v2->csf && (imximage_ivt_offset != UNDEFINED) && + (imximage_csf_size != UNDEFINED)) { + printf("HAB Blocks: %08x %08x %08x\n", + (uint32_t)fhdr_v2->self, 0, + hdr_v2->boot_data.size - imximage_ivt_offset - + imximage_csf_size); + } } static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, @@ -327,18 +361,36 @@ static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, set_hdr_func(imxhdr); break; case CMD_BOOT_FROM: - imxhdr->flash_offset = get_table_entry_id(imximage_bootops, + imximage_ivt_offset = get_table_entry_id(imximage_boot_offset, "imximage boot option", token); - if (imxhdr->flash_offset == -1) { + if (imximage_ivt_offset == -1) { fprintf(stderr, "Error: %s[%d] -Invalid boot device" "(%s)\n", name, lineno, token); exit(EXIT_FAILURE); } + + imximage_init_loadsize = + get_table_entry_id(imximage_boot_loadsize, + "imximage boot option", token); + + if (imximage_init_loadsize == -1) { + fprintf(stderr, + "Error: %s[%d] -Invalid boot device(%s)\n", + name, lineno, token); + exit(EXIT_FAILURE); + } + + /* + * The SOC loads from the storage starting at address 0 + * then ensures that the load size contains the offset + */ + if (imximage_init_loadsize < imximage_ivt_offset) + imximage_init_loadsize = imximage_ivt_offset; if (unlikely(cmd_ver_first != 1)) cmd_ver_first = 0; break; case CMD_BOOT_OFFSET: - imxhdr->flash_offset = get_cfg_value(token, name, lineno); + imximage_ivt_offset = get_cfg_value(token, name, lineno); if (unlikely(cmd_ver_first != 1)) cmd_ver_first = 0; break; @@ -348,6 +400,17 @@ static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, if (unlikely(cmd_ver_first != 1)) cmd_ver_first = 0; break; + case CMD_CSF: + if (imximage_version != 2) { + fprintf(stderr, + "Error: %s[%d] - CSF only supported for VERSION 2(%s)\n", + name, lineno, token); + exit(EXIT_FAILURE); + } + imximage_csf_size = get_cfg_value(token, name, lineno); + if (unlikely(cmd_ver_first != 1)) + cmd_ver_first = 0; + break; } } @@ -408,7 +471,8 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name) exit(EXIT_FAILURE); } - /* Very simple parsing, line starting with # are comments + /* + * Very simple parsing, line starting with # are comments * and are dropped */ while ((getline(&line, &len, fd)) > 0) { @@ -439,7 +503,7 @@ static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name) fclose(fd); /* Exit if there is no BOOT_FROM field specifying the flash_offset */ - if (imxhdr->flash_offset == FLASH_OFFSET_UNDEFINED) { + if (imximage_ivt_offset == FLASH_OFFSET_UNDEFINED) { fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name); exit(EXIT_FAILURE); } @@ -497,14 +561,15 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, */ imximage_version = IMXIMAGE_V1; /* Be able to detect if the cfg file has no BOOT_FROM tag */ - imxhdr->flash_offset = FLASH_OFFSET_UNDEFINED; + imximage_ivt_offset = FLASH_OFFSET_UNDEFINED; + imximage_csf_size = 0; set_hdr_func(imxhdr); /* Parse dcd configuration file */ dcd_len = parse_cfg_file(imxhdr, params->imagename); /* Set the imx header */ - (*set_imx_hdr)(imxhdr, dcd_len, params->ep, imxhdr->flash_offset); + (*set_imx_hdr)(imxhdr, dcd_len, params->ep, imximage_ivt_offset); /* * ROM bug alert @@ -515,7 +580,13 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, * * The remaining fraction of a block bytes would not be loaded! */ - *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 4096); + *header_size_ptr = ROUND(sbuf->st_size, 4096); + + if (csf_ptr && imximage_csf_size) { + *csf_ptr = params->ep - imximage_init_loadsize + + *header_size_ptr; + *header_size_ptr += imximage_csf_size; + } } int imximage_check_params(struct mkimage_params *params) @@ -540,18 +611,92 @@ int imximage_check_params(struct mkimage_params *params) (params->xflag) || !(strlen(params->imagename)); } +static int imximage_generate(struct mkimage_params *params, + struct image_type_params *tparams) +{ + struct imx_header *imxhdr; + size_t alloc_len; + struct stat sbuf; + char *datafile = params->datafile; + uint32_t pad_len; + + memset(&imximage_header, 0, sizeof(imximage_header)); + + /* + * In order to not change the old imx cfg file + * by adding VERSION command into it, here need + * set up function ptr group to V1 by default. + */ + imximage_version = IMXIMAGE_V1; + /* Be able to detect if the cfg file has no BOOT_FROM tag */ + imximage_ivt_offset = FLASH_OFFSET_UNDEFINED; + imximage_csf_size = 0; + set_hdr_func(imxhdr); + + /* Parse dcd configuration file */ + parse_cfg_file(&imximage_header, params->imagename); + + /* TODO: check i.MX image V1 handling, for now use 'old' style */ + if (imximage_version == IMXIMAGE_V1) { + alloc_len = 4096; + } else { + if (imximage_init_loadsize < imximage_ivt_offset + + sizeof(imx_header_v2_t)) + imximage_init_loadsize = imximage_ivt_offset + + sizeof(imx_header_v2_t); + alloc_len = imximage_init_loadsize - imximage_ivt_offset; + } + + if (alloc_len < sizeof(struct imx_header)) { + fprintf(stderr, "%s: header error\n", + params->cmdname); + exit(EXIT_FAILURE); + } + + imxhdr = malloc(alloc_len); + + if (!imxhdr) { + fprintf(stderr, "%s: malloc return failure: %s\n", + params->cmdname, strerror(errno)); + exit(EXIT_FAILURE); + } + + memset(imxhdr, 0, alloc_len); + + tparams->header_size = alloc_len; + tparams->hdr = imxhdr; + + /* determine data image file length */ + + if (stat(datafile, &sbuf) < 0) { + fprintf(stderr, "%s: Can't stat %s: %s\n", + params->cmdname, datafile, strerror(errno)); + exit(EXIT_FAILURE); + } + + pad_len = ROUND(sbuf.st_size, 4096) - sbuf.st_size; + + /* TODO: check i.MX image V1 handling, for now use 'old' style */ + if (imximage_version == IMXIMAGE_V1) + return 0; + else + return pad_len; +} + + /* * imximage parameters */ static struct image_type_params imximage_params = { .name = "Freescale i.MX Boot Image support", - .header_size = sizeof(struct imx_header), - .hdr = (void *)&imximage_header, + .header_size = 0, + .hdr = NULL, .check_image_type = imximage_check_image_types, .verify_header = imximage_verify_header, .print_header = imximage_print_header, .set_header = imximage_set_header, .check_params = imximage_check_params, + .vrec_header = imximage_generate, }; void init_imx_image_type(void) diff --git a/tools/imximage.h b/tools/imximage.h index 214187bb8c..efe6a88d9e 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -13,14 +13,14 @@ #define APP_CODE_BARKER 0xB1 #define DCD_BARKER 0xB17219E9 -#define HEADER_OFFSET 0x400 - /* * NOTE: This file must be kept in sync with arch/arm/include/asm/\ * imx-common/imximage.cfg because tools/imximage.c can not * cross-include headers from arch/arm/ and vice-versa. */ #define CMD_DATA_STR "DATA" + +/* Initial Vector Table Offset */ #define FLASH_OFFSET_UNDEFINED 0xFFFFFFFF #define FLASH_OFFSET_STANDARD 0x400 #define FLASH_OFFSET_NAND FLASH_OFFSET_STANDARD @@ -30,6 +30,16 @@ #define FLASH_OFFSET_NOR 0x1000 #define FLASH_OFFSET_SATA FLASH_OFFSET_STANDARD +/* Initial Load Region Size */ +#define FLASH_LOADSIZE_UNDEFINED 0xFFFFFFFF +#define FLASH_LOADSIZE_STANDARD 0x1000 +#define FLASH_LOADSIZE_NAND FLASH_LOADSIZE_STANDARD +#define FLASH_LOADSIZE_SD FLASH_LOADSIZE_STANDARD +#define FLASH_LOADSIZE_SPI FLASH_LOADSIZE_STANDARD +#define FLASH_LOADSIZE_ONENAND 0x400 +#define FLASH_LOADSIZE_NOR 0x0 /* entire image */ +#define FLASH_LOADSIZE_SATA FLASH_LOADSIZE_STANDARD + #define IVT_HEADER_TAG 0xD1 #define IVT_VERSION 0x40 #define DCD_HEADER_TAG 0xD2 @@ -42,7 +52,8 @@ enum imximage_cmd { CMD_IMAGE_VERSION, CMD_BOOT_FROM, CMD_BOOT_OFFSET, - CMD_DATA + CMD_DATA, + CMD_CSF, }; enum imximage_fld_types { @@ -147,8 +158,7 @@ struct imx_header { imx_header_v1_t hdr_v1; imx_header_v2_t hdr_v2; } header; - uint32_t flash_offset; -} __attribute__((aligned(4096))); +}; typedef void (*set_dcd_val_t)(struct imx_header *imxhdr, char *name, int lineno, diff --git a/tools/kwbimage.c b/tools/kwbimage.c index d08e49892d..1df6b2051e 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -6,9 +6,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "kwbimage.h" diff --git a/tools/logos/siemens.bmp b/tools/logos/siemens.bmp Binary files differnew file mode 100644 index 0000000000..bff2b190e0 --- /dev/null +++ b/tools/logos/siemens.bmp diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c index f685ff2e30..bbd3041e36 100644 --- a/tools/mkenvimage.c +++ b/tools/mkenvimage.c @@ -9,9 +9,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* We want the GNU version of basename() */ -#define _GNU_SOURCE - #include <errno.h> #include <fcntl.h> #include <stdio.h> diff --git a/tools/mkimage.c b/tools/mkimage.c index b700b9e8c0..7f221013e3 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -137,6 +137,7 @@ main (int argc, char **argv) char *ptr; int retval = 0; struct image_type_params *tparams = NULL; + int pad_len = 0; /* Init Freescale PBL Boot image generation/list support */ init_pbl_image_type(); @@ -144,6 +145,8 @@ main (int argc, char **argv) init_kwb_image_type (); /* Init Freescale imx Boot image generation/list support */ init_imx_image_type (); + /* Init Freescale mxs Boot image generation/list support */ + init_mxs_image_type(); /* Init FIT image generation/list support */ init_fit_image_type (); /* Init TI OMAP Boot image generation/list support */ @@ -391,7 +394,7 @@ NXTARG: ; * allocate memory for the header itself. */ if (tparams->vrec_header) - tparams->vrec_header(¶ms, tparams); + pad_len = tparams->vrec_header(¶ms, tparams); else memset(tparams->hdr, 0, tparams->header_size); @@ -463,7 +466,7 @@ NXTARG: ; /* PBL has special Image format, implements its' own */ pbl_load_uboot(ifd, ¶ms); } else { - copy_file (ifd, params.datafile, 0); + copy_file(ifd, params.datafile, pad_len); } } @@ -537,10 +540,19 @@ copy_file (int ifd, const char *datafile, int pad) unsigned char *ptr; int tail; int zero = 0; + uint8_t zeros[4096]; int offset = 0; int size; struct image_type_params *tparams = mkimage_get_type (params.type); + if (pad >= sizeof(zeros)) { + fprintf(stderr, "%s: Can't pad to %d\n", + params.cmdname, pad); + exit(EXIT_FAILURE); + } + + memset(zeros, 0, sizeof(zeros)); + if (params.vflag) { fprintf (stderr, "Adding Image %s\n", datafile); } @@ -598,7 +610,8 @@ copy_file (int ifd, const char *datafile, int pad) exit (EXIT_FAILURE); } - if (pad && ((tail = size % 4) != 0)) { + tail = size % 4; + if ((pad == 1) && (tail != 0)) { if (write(ifd, (char *)&zero, 4-tail) != 4-tail) { fprintf (stderr, "%s: Write error on %s: %s\n", @@ -606,6 +619,13 @@ copy_file (int ifd, const char *datafile, int pad) strerror(errno)); exit (EXIT_FAILURE); } + } else if (pad > 1) { + if (write(ifd, (char *)&zeros, pad) != pad) { + fprintf(stderr, "%s: Write error on %s: %s\n", + params.cmdname, params.imagefile, + strerror(errno)); + exit(EXIT_FAILURE); + } } (void) munmap((void *)ptr, sbuf.st_size); diff --git a/tools/mkimage.h b/tools/mkimage.h index 950e19067f..af491544e4 100644 --- a/tools/mkimage.h +++ b/tools/mkimage.h @@ -132,7 +132,10 @@ struct image_type_params { /* * This callback function will be executed for variable size record * It is expected to build this header in memory and return its length - * and a pointer to it + * and a pointer to it by using image_type_params.header_size and + * image_type_params.hdr. The return value shall indicate if an + * additional padding should be used when copying the data image + * by returning the padding length. */ int (*vrec_header) (struct mkimage_params *, struct image_type_params *); @@ -158,6 +161,7 @@ void init_pbl_image_type(void); void init_ais_image_type(void); void init_kwb_image_type (void); void init_imx_image_type (void); +void init_mxs_image_type(void); void init_default_image_type (void); void init_fit_image_type (void); void init_ubl_image_type(void); diff --git a/tools/mxsboot.c b/tools/mxsboot.c index 3d9cc10f0f..1060cbf605 100644 --- a/tools/mxsboot.c +++ b/tools/mxsboot.c @@ -28,14 +28,14 @@ * * TWEAK this if you have different kind of NAND chip. */ -uint32_t nand_writesize = 2048; -uint32_t nand_oobsize = 64; -uint32_t nand_erasesize = 128 * 1024; +static uint32_t nand_writesize = 2048; +static uint32_t nand_oobsize = 64; +static uint32_t nand_erasesize = 128 * 1024; /* * Sector on which the SigmaTel boot partition (0x53) starts. */ -uint32_t sd_sector = 2048; +static uint32_t sd_sector = 2048; /* * Each of the U-Boot bootstreams is at maximum 1MB big. @@ -434,7 +434,7 @@ static int mx28_nand_write_firmware(struct mx28_nand_fcb *fcb, int infd, return 0; } -void usage(void) +static void usage(void) { printf( "Usage: mxsboot [ops] <type> <infile> <outfile>\n" @@ -575,7 +575,7 @@ err0: return ret; } -int parse_ops(int argc, char **argv) +static int parse_ops(int argc, char **argv) { int i; int tmp; diff --git a/tools/mxsimage.c b/tools/mxsimage.c new file mode 100644 index 0000000000..5db19b216f --- /dev/null +++ b/tools/mxsimage.c @@ -0,0 +1,2347 @@ +/* + * Freescale i.MX23/i.MX28 SB image generator + * + * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifdef CONFIG_MXS + +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> +#include <limits.h> + +#include <openssl/evp.h> + +#include "mkimage.h" +#include "mxsimage.h" +#include <image.h> + + +/* + * DCD block + * |-Write to address command block + * | 0xf00 == 0xf33d + * | 0xba2 == 0xb33f + * |-ORR address with mask command block + * | 0xf00 |= 0x1337 + * |-Write to address command block + * | 0xba2 == 0xd00d + * : + */ +#define SB_HAB_DCD_WRITE 0xccUL +#define SB_HAB_DCD_CHECK 0xcfUL +#define SB_HAB_DCD_NOOP 0xc0UL +#define SB_HAB_DCD_MASK_BIT (1 << 3) +#define SB_HAB_DCD_SET_BIT (1 << 4) + +/* Addr.n = Value.n */ +#define SB_DCD_WRITE \ + (SB_HAB_DCD_WRITE << 24) +/* Addr.n &= ~Value.n */ +#define SB_DCD_ANDC \ + ((SB_HAB_DCD_WRITE << 24) | SB_HAB_DCD_SET_BIT) +/* Addr.n |= Value.n */ +#define SB_DCD_ORR \ + ((SB_HAB_DCD_WRITE << 24) | SB_HAB_DCD_SET_BIT | SB_HAB_DCD_MASK_BIT) +/* (Addr.n & Value.n) == 0 */ +#define SB_DCD_CHK_EQZ \ + (SB_HAB_DCD_CHECK << 24) +/* (Addr.n & Value.n) == Value.n */ +#define SB_DCD_CHK_EQ \ + ((SB_HAB_DCD_CHECK << 24) | SB_HAB_DCD_SET_BIT) +/* (Addr.n & Value.n) != Value.n */ +#define SB_DCD_CHK_NEQ \ + ((SB_HAB_DCD_CHECK << 24) | SB_HAB_DCD_MASK_BIT) +/* (Addr.n & Value.n) != 0 */ +#define SB_DCD_CHK_NEZ \ + ((SB_HAB_DCD_CHECK << 24) | SB_HAB_DCD_SET_BIT | SB_HAB_DCD_MASK_BIT) +/* NOP */ +#define SB_DCD_NOOP \ + (SB_HAB_DCD_NOOP << 24) + +struct sb_dcd_ctx { + struct sb_dcd_ctx *dcd; + + uint32_t id; + + /* The DCD block. */ + uint32_t *payload; + /* Size of the whole DCD block. */ + uint32_t size; + + /* Pointer to previous DCD command block. */ + uint32_t *prev_dcd_head; +}; + +/* + * IMAGE + * |-SECTION + * | |-CMD + * | |-CMD + * | `-CMD + * |-SECTION + * | |-CMD + * : : + */ +struct sb_cmd_list { + char *cmd; + size_t len; + unsigned int lineno; +}; + +struct sb_cmd_ctx { + uint32_t size; + + struct sb_cmd_ctx *cmd; + + uint8_t *data; + uint32_t length; + + struct sb_command payload; + struct sb_command c_payload; +}; + +struct sb_section_ctx { + uint32_t size; + + /* Section flags */ + unsigned int boot:1; + + struct sb_section_ctx *sect; + + struct sb_cmd_ctx *cmd_head; + struct sb_cmd_ctx *cmd_tail; + + struct sb_sections_header payload; +}; + +struct sb_image_ctx { + unsigned int in_section:1; + unsigned int in_dcd:1; + /* Image configuration */ + unsigned int verbose_boot:1; + unsigned int silent_dump:1; + char *input_filename; + char *output_filename; + char *cfg_filename; + uint8_t image_key[16]; + + /* Number of section in the image */ + unsigned int sect_count; + /* Bootable section */ + unsigned int sect_boot; + unsigned int sect_boot_found:1; + + struct sb_section_ctx *sect_head; + struct sb_section_ctx *sect_tail; + + struct sb_dcd_ctx *dcd_head; + struct sb_dcd_ctx *dcd_tail; + + EVP_CIPHER_CTX cipher_ctx; + EVP_MD_CTX md_ctx; + uint8_t digest[32]; + struct sb_key_dictionary_key sb_dict_key; + + struct sb_boot_image_header payload; +}; + +/* + * Instruction semantics: + * NOOP + * TAG [LAST] + * LOAD address file + * LOAD IVT address IVT_entry_point + * FILL address pattern length + * JUMP [HAB] address [r0_arg] + * CALL [HAB] address [r0_arg] + * MODE mode + * For i.MX23, mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH + * JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1 + * For i.MX28, mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH + * JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1 + */ + +/* + * AES libcrypto + */ +static int sb_aes_init(struct sb_image_ctx *ictx, uint8_t *iv, int enc) +{ + EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx; + int ret; + + /* If there is no init vector, init vector is all zeroes. */ + if (!iv) + iv = ictx->image_key; + + EVP_CIPHER_CTX_init(ctx); + ret = EVP_CipherInit(ctx, EVP_aes_128_cbc(), ictx->image_key, iv, enc); + if (ret == 1) + EVP_CIPHER_CTX_set_padding(ctx, 0); + return ret; +} + +static int sb_aes_crypt(struct sb_image_ctx *ictx, uint8_t *in_data, + uint8_t *out_data, int in_len) +{ + EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx; + int ret, outlen; + uint8_t *outbuf; + + outbuf = malloc(in_len); + if (!outbuf) + return -ENOMEM; + memset(outbuf, 0, sizeof(in_len)); + + ret = EVP_CipherUpdate(ctx, outbuf, &outlen, in_data, in_len); + if (!ret) { + ret = -EINVAL; + goto err; + } + + if (out_data) + memcpy(out_data, outbuf, outlen); + +err: + free(outbuf); + return ret; +} + +static int sb_aes_deinit(EVP_CIPHER_CTX *ctx) +{ + return EVP_CIPHER_CTX_cleanup(ctx); +} + +static int sb_aes_reinit(struct sb_image_ctx *ictx, int enc) +{ + int ret; + EVP_CIPHER_CTX *ctx = &ictx->cipher_ctx; + struct sb_boot_image_header *sb_header = &ictx->payload; + uint8_t *iv = sb_header->iv; + + ret = sb_aes_deinit(ctx); + if (!ret) + return ret; + return sb_aes_init(ictx, iv, enc); +} + +/* + * CRC32 + */ +static uint32_t crc32(uint8_t *data, uint32_t len) +{ + const uint32_t poly = 0x04c11db7; + uint32_t crc32 = 0xffffffff; + unsigned int byte, bit; + + for (byte = 0; byte < len; byte++) { + crc32 ^= data[byte] << 24; + + for (bit = 8; bit > 0; bit--) { + if (crc32 & (1UL << 31)) + crc32 = (crc32 << 1) ^ poly; + else + crc32 = (crc32 << 1); + } + } + + return crc32; +} + +/* + * Debug + */ +static void soprintf(struct sb_image_ctx *ictx, const char *fmt, ...) +{ + va_list ap; + + if (ictx->silent_dump) + return; + + va_start(ap, fmt); + vfprintf(stdout, fmt, ap); + va_end(ap); +} + +/* + * Code + */ +static time_t sb_get_timestamp(void) +{ + struct tm time_2000 = { + .tm_yday = 1, /* Jan. 1st */ + .tm_year = 100, /* 2000 */ + }; + time_t seconds_to_2000 = mktime(&time_2000); + time_t seconds_to_now = time(NULL); + + return seconds_to_now - seconds_to_2000; +} + +static int sb_get_time(time_t time, struct tm *tm) +{ + struct tm time_2000 = { + .tm_yday = 1, /* Jan. 1st */ + .tm_year = 0, /* 1900 */ + }; + const time_t seconds_to_2000 = mktime(&time_2000); + const time_t seconds_to_now = seconds_to_2000 + time; + struct tm *ret; + ret = gmtime_r(&seconds_to_now, tm); + return ret ? 0 : -EINVAL; +} + +static void sb_encrypt_sb_header(struct sb_image_ctx *ictx) +{ + EVP_MD_CTX *md_ctx = &ictx->md_ctx; + struct sb_boot_image_header *sb_header = &ictx->payload; + uint8_t *sb_header_ptr = (uint8_t *)sb_header; + + /* Encrypt the header, compute the digest. */ + sb_aes_crypt(ictx, sb_header_ptr, NULL, sizeof(*sb_header)); + EVP_DigestUpdate(md_ctx, sb_header_ptr, sizeof(*sb_header)); +} + +static void sb_encrypt_sb_sections_header(struct sb_image_ctx *ictx) +{ + EVP_MD_CTX *md_ctx = &ictx->md_ctx; + struct sb_section_ctx *sctx = ictx->sect_head; + struct sb_sections_header *shdr; + uint8_t *sb_sections_header_ptr; + const int size = sizeof(*shdr); + + while (sctx) { + shdr = &sctx->payload; + sb_sections_header_ptr = (uint8_t *)shdr; + + sb_aes_crypt(ictx, sb_sections_header_ptr, + ictx->sb_dict_key.cbc_mac, size); + EVP_DigestUpdate(md_ctx, sb_sections_header_ptr, size); + + sctx = sctx->sect; + }; +} + +static void sb_encrypt_key_dictionary_key(struct sb_image_ctx *ictx) +{ + EVP_MD_CTX *md_ctx = &ictx->md_ctx; + + sb_aes_crypt(ictx, ictx->image_key, ictx->sb_dict_key.key, + sizeof(ictx->sb_dict_key.key)); + EVP_DigestUpdate(md_ctx, &ictx->sb_dict_key, sizeof(ictx->sb_dict_key)); +} + +static void sb_decrypt_key_dictionary_key(struct sb_image_ctx *ictx) +{ + EVP_MD_CTX *md_ctx = &ictx->md_ctx; + + EVP_DigestUpdate(md_ctx, &ictx->sb_dict_key, sizeof(ictx->sb_dict_key)); + sb_aes_crypt(ictx, ictx->sb_dict_key.key, ictx->image_key, + sizeof(ictx->sb_dict_key.key)); +} + +static void sb_encrypt_tag(struct sb_image_ctx *ictx, + struct sb_cmd_ctx *cctx) +{ + EVP_MD_CTX *md_ctx = &ictx->md_ctx; + struct sb_command *cmd = &cctx->payload; + + sb_aes_crypt(ictx, (uint8_t *)cmd, + (uint8_t *)&cctx->c_payload, sizeof(*cmd)); + EVP_DigestUpdate(md_ctx, &cctx->c_payload, sizeof(*cmd)); +} + +static int sb_encrypt_image(struct sb_image_ctx *ictx) +{ + /* Start image-wide crypto. */ + EVP_MD_CTX_init(&ictx->md_ctx); + EVP_DigestInit(&ictx->md_ctx, EVP_sha1()); + + /* + * SB image header. + */ + sb_aes_init(ictx, NULL, 1); + sb_encrypt_sb_header(ictx); + + /* + * SB sections header. + */ + sb_encrypt_sb_sections_header(ictx); + + /* + * Key dictionary. + */ + sb_aes_reinit(ictx, 1); + sb_encrypt_key_dictionary_key(ictx); + + /* + * Section tags. + */ + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + struct sb_section_ctx *sctx = ictx->sect_head; + + while (sctx) { + cctx = sctx->cmd_head; + + sb_aes_reinit(ictx, 1); + + while (cctx) { + ccmd = &cctx->payload; + + sb_encrypt_tag(ictx, cctx); + + if (ccmd->header.tag == ROM_TAG_CMD) { + sb_aes_reinit(ictx, 1); + } else if (ccmd->header.tag == ROM_LOAD_CMD) { + sb_aes_crypt(ictx, cctx->data, cctx->data, + cctx->length); + EVP_DigestUpdate(&ictx->md_ctx, cctx->data, + cctx->length); + } + + cctx = cctx->cmd; + } + + sctx = sctx->sect; + }; + + /* + * Dump the SHA1 of the whole image. + */ + sb_aes_reinit(ictx, 1); + + EVP_DigestFinal(&ictx->md_ctx, ictx->digest, NULL); + sb_aes_crypt(ictx, ictx->digest, ictx->digest, sizeof(ictx->digest)); + + /* Stop the encryption session. */ + sb_aes_deinit(&ictx->cipher_ctx); + + return 0; +} + +static int sb_load_file(struct sb_cmd_ctx *cctx, char *filename) +{ + long real_size, roundup_size; + uint8_t *data; + long ret; + unsigned long size; + FILE *fp; + + if (!filename) { + fprintf(stderr, "ERR: Missing filename!\n"); + return -EINVAL; + } + + fp = fopen(filename, "r"); + if (!fp) + goto err_open; + + ret = fseek(fp, 0, SEEK_END); + if (ret < 0) + goto err_file; + + real_size = ftell(fp); + if (real_size < 0) + goto err_file; + + ret = fseek(fp, 0, SEEK_SET); + if (ret < 0) + goto err_file; + + roundup_size = roundup(real_size, SB_BLOCK_SIZE); + data = calloc(1, roundup_size); + if (!data) + goto err_file; + + size = fread(data, 1, real_size, fp); + if (size != (unsigned long)real_size) + goto err_alloc; + + cctx->data = data; + cctx->length = roundup_size; + + fclose(fp); + return 0; + +err_alloc: + free(data); +err_file: + fclose(fp); +err_open: + fprintf(stderr, "ERR: Failed to load file \"%s\"\n", filename); + return -EINVAL; +} + +static uint8_t sb_command_checksum(struct sb_command *inst) +{ + uint8_t *inst_ptr = (uint8_t *)inst; + uint8_t csum = 0; + unsigned int i; + + for (i = 0; i < sizeof(struct sb_command); i++) + csum += inst_ptr[i]; + + return csum; +} + +static int sb_token_to_long(char *tok, uint32_t *rid) +{ + char *endptr; + unsigned long id; + + if (tok[0] != '0' || tok[1] != 'x') { + fprintf(stderr, "ERR: Invalid hexadecimal number!\n"); + return -EINVAL; + } + + tok += 2; + + id = strtoul(tok, &endptr, 16); + if ((errno == ERANGE && id == ULONG_MAX) || (errno != 0 && id == 0)) { + fprintf(stderr, "ERR: Value can't be decoded!\n"); + return -EINVAL; + } + + /* Check for 32-bit overflow. */ + if (id > 0xffffffff) { + fprintf(stderr, "ERR: Value too big!\n"); + return -EINVAL; + } + + if (endptr == tok) { + fprintf(stderr, "ERR: Deformed value!\n"); + return -EINVAL; + } + + *rid = (uint32_t)id; + return 0; +} + +static int sb_grow_dcd(struct sb_dcd_ctx *dctx, unsigned int inc_size) +{ + uint32_t *tmp; + + if (!inc_size) + return 0; + + dctx->size += inc_size; + tmp = realloc(dctx->payload, dctx->size); + if (!tmp) + return -ENOMEM; + + dctx->payload = tmp; + + /* Assemble and update the HAB DCD header. */ + dctx->payload[0] = htonl((SB_HAB_DCD_TAG << 24) | + (dctx->size << 8) | + SB_HAB_VERSION); + + return 0; +} + +static int sb_build_dcd(struct sb_image_ctx *ictx, struct sb_cmd_list *cmd) +{ + struct sb_dcd_ctx *dctx; + + char *tok; + uint32_t id; + int ret; + + dctx = calloc(1, sizeof(*dctx)); + if (!dctx) + return -ENOMEM; + + ret = sb_grow_dcd(dctx, 4); + if (ret) + goto err_dcd; + + /* Read DCD block number. */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: DCD block without number!\n", + cmd->lineno); + ret = -EINVAL; + goto err_dcd; + } + + /* Parse the DCD block number. */ + ret = sb_token_to_long(tok, &id); + if (ret) { + fprintf(stderr, "#%i ERR: Malformed DCD block number!\n", + cmd->lineno); + goto err_dcd; + } + + dctx->id = id; + + /* + * The DCD block is now constructed. Append it to the list. + * WARNING: The DCD size is still not computed and will be + * updated while parsing it's commands. + */ + if (!ictx->dcd_head) { + ictx->dcd_head = dctx; + ictx->dcd_tail = dctx; + } else { + ictx->dcd_tail->dcd = dctx; + ictx->dcd_tail = dctx; + } + + return 0; + +err_dcd: + free(dctx->payload); + free(dctx); + return ret; +} + +static int sb_build_dcd_block(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd, + uint32_t type) +{ + char *tok; + uint32_t address, value, length; + int ret; + + struct sb_dcd_ctx *dctx = ictx->dcd_tail; + uint32_t *dcd; + + if (dctx->prev_dcd_head && (type != SB_DCD_NOOP) && + ((dctx->prev_dcd_head[0] & 0xff0000ff) == type)) { + /* Same instruction as before, just append it. */ + ret = sb_grow_dcd(dctx, 8); + if (ret) + return ret; + } else if (type == SB_DCD_NOOP) { + ret = sb_grow_dcd(dctx, 4); + if (ret) + return ret; + + /* Update DCD command block pointer. */ + dctx->prev_dcd_head = dctx->payload + + dctx->size / sizeof(*dctx->payload) - 1; + + /* NOOP has only 4 bytes and no payload. */ + goto noop; + } else { + /* + * Either a different instruction block started now + * or this is the first instruction block. + */ + ret = sb_grow_dcd(dctx, 12); + if (ret) + return ret; + + /* Update DCD command block pointer. */ + dctx->prev_dcd_head = dctx->payload + + dctx->size / sizeof(*dctx->payload) - 3; + } + + dcd = dctx->payload + dctx->size / sizeof(*dctx->payload) - 2; + + /* + * Prepare the command. + */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing DCD address!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* Read DCD destination address. */ + ret = sb_token_to_long(tok, &address); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect DCD address!\n", + cmd->lineno); + goto err; + } + + tok = strtok(NULL, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing DCD value!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* Read DCD operation value. */ + ret = sb_token_to_long(tok, &value); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect DCD value!\n", + cmd->lineno); + goto err; + } + + /* Fill in the new DCD entry. */ + dcd[0] = htonl(address); + dcd[1] = htonl(value); + +noop: + /* Update the DCD command block. */ + length = dctx->size - + ((dctx->prev_dcd_head - dctx->payload) * + sizeof(*dctx->payload)); + dctx->prev_dcd_head[0] = htonl(type | (length << 8)); + +err: + return ret; +} + +static int sb_build_section(struct sb_image_ctx *ictx, struct sb_cmd_list *cmd) +{ + struct sb_section_ctx *sctx; + struct sb_sections_header *shdr; + char *tok; + uint32_t bootable = 0; + uint32_t id; + int ret; + + sctx = calloc(1, sizeof(*sctx)); + if (!sctx) + return -ENOMEM; + + /* Read section number. */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Section without number!\n", + cmd->lineno); + ret = -EINVAL; + goto err_sect; + } + + /* Parse the section number. */ + ret = sb_token_to_long(tok, &id); + if (ret) { + fprintf(stderr, "#%i ERR: Malformed section number!\n", + cmd->lineno); + goto err_sect; + } + + /* Read section's BOOTABLE flag. */ + tok = strtok(NULL, " "); + if (tok && (strlen(tok) == 8) && !strncmp(tok, "BOOTABLE", 8)) + bootable = SB_SECTION_FLAG_BOOTABLE; + + sctx->boot = bootable; + + shdr = &sctx->payload; + shdr->section_number = id; + shdr->section_flags = bootable; + + /* + * The section is now constructed. Append it to the list. + * WARNING: The section size is still not computed and will + * be updated while parsing it's commands. + */ + ictx->sect_count++; + + /* Mark that this section is bootable one. */ + if (bootable) { + if (ictx->sect_boot_found) { + fprintf(stderr, + "#%i WARN: Multiple bootable section!\n", + cmd->lineno); + } else { + ictx->sect_boot = id; + ictx->sect_boot_found = 1; + } + } + + if (!ictx->sect_head) { + ictx->sect_head = sctx; + ictx->sect_tail = sctx; + } else { + ictx->sect_tail->sect = sctx; + ictx->sect_tail = sctx; + } + + return 0; + +err_sect: + free(sctx); + return ret; +} + +static int sb_build_command_nop(struct sb_image_ctx *ictx) +{ + struct sb_section_ctx *sctx = ictx->sect_tail; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + + ccmd = &cctx->payload; + + /* + * Construct the command. + */ + ccmd->header.checksum = 0x5a; + ccmd->header.tag = ROM_NOP_CMD; + + cctx->size = sizeof(*ccmd); + + /* + * Append the command to the last section. + */ + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + return 0; +} + +static int sb_build_command_tag(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd) +{ + struct sb_section_ctx *sctx = ictx->sect_tail; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + char *tok; + + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + + ccmd = &cctx->payload; + + /* + * Prepare the command. + */ + /* Check for the LAST keyword. */ + tok = strtok(cmd->cmd, " "); + if (tok && !strcmp(tok, "LAST")) + ccmd->header.flags = ROM_TAG_CMD_FLAG_ROM_LAST_TAG; + + /* + * Construct the command. + */ + ccmd->header.checksum = 0x5a; + ccmd->header.tag = ROM_TAG_CMD; + + cctx->size = sizeof(*ccmd); + + /* + * Append the command to the last section. + */ + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + return 0; +} + +static int sb_build_command_load(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd) +{ + struct sb_section_ctx *sctx = ictx->sect_tail; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + char *tok; + int ret, is_ivt = 0, is_dcd = 0; + uint32_t dest, dcd = 0; + + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + + ccmd = &cctx->payload; + + /* + * Prepare the command. + */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing LOAD address or 'IVT'!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* Check for "IVT" flag. */ + if (!strcmp(tok, "IVT")) + is_ivt = 1; + if (!strcmp(tok, "DCD")) + is_dcd = 1; + if (is_ivt || is_dcd) { + tok = strtok(NULL, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing LOAD address!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + } + + /* Read load destination address. */ + ret = sb_token_to_long(tok, &dest); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect LOAD address!\n", + cmd->lineno); + goto err; + } + + /* Read filename or IVT entrypoint or DCD block ID. */ + tok = strtok(NULL, " "); + if (!tok) { + fprintf(stderr, + "#%i ERR: Missing LOAD filename or IVT ep or DCD block ID!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + if (is_ivt) { + /* Handle IVT. */ + struct sb_ivt_header *ivt; + uint32_t ivtep; + ret = sb_token_to_long(tok, &ivtep); + + if (ret) { + fprintf(stderr, + "#%i ERR: Incorrect IVT entry point!\n", + cmd->lineno); + goto err; + } + + ivt = calloc(1, sizeof(*ivt)); + if (!ivt) { + ret = -ENOMEM; + goto err; + } + + ivt->header = sb_hab_ivt_header(); + ivt->entry = ivtep; + ivt->self = dest; + + cctx->data = (uint8_t *)ivt; + cctx->length = sizeof(*ivt); + } else if (is_dcd) { + struct sb_dcd_ctx *dctx = ictx->dcd_head; + uint32_t dcdid; + uint8_t *payload; + uint32_t asize; + ret = sb_token_to_long(tok, &dcdid); + + if (ret) { + fprintf(stderr, + "#%i ERR: Incorrect DCD block ID!\n", + cmd->lineno); + goto err; + } + + while (dctx) { + if (dctx->id == dcdid) + break; + dctx = dctx->dcd; + } + + if (!dctx) { + fprintf(stderr, "#%i ERR: DCD block %08x not found!\n", + cmd->lineno, dcdid); + goto err; + } + + asize = roundup(dctx->size, SB_BLOCK_SIZE); + payload = calloc(1, asize); + if (!payload) { + ret = -ENOMEM; + goto err; + } + + memcpy(payload, dctx->payload, dctx->size); + + cctx->data = payload; + cctx->length = asize; + + /* Set the Load DCD flag. */ + dcd = ROM_LOAD_CMD_FLAG_DCD_LOAD; + } else { + /* Regular LOAD of a file. */ + ret = sb_load_file(cctx, tok); + if (ret) { + fprintf(stderr, "#%i ERR: Cannot load '%s'!\n", + cmd->lineno, tok); + goto err; + } + } + + if (cctx->length & (SB_BLOCK_SIZE - 1)) { + fprintf(stderr, "#%i ERR: Unaligned payload!\n", + cmd->lineno); + } + + /* + * Construct the command. + */ + ccmd->header.checksum = 0x5a; + ccmd->header.tag = ROM_LOAD_CMD; + ccmd->header.flags = dcd; + + ccmd->load.address = dest; + ccmd->load.count = cctx->length; + ccmd->load.crc32 = crc32(cctx->data, cctx->length); + + cctx->size = sizeof(*ccmd) + cctx->length; + + /* + * Append the command to the last section. + */ + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + return 0; + +err: + free(cctx); + return ret; +} + +static int sb_build_command_fill(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd) +{ + struct sb_section_ctx *sctx = ictx->sect_tail; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + char *tok; + uint32_t address, pattern, length; + int ret; + + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + + ccmd = &cctx->payload; + + /* + * Prepare the command. + */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing FILL address!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* Read fill destination address. */ + ret = sb_token_to_long(tok, &address); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect FILL address!\n", + cmd->lineno); + goto err; + } + + tok = strtok(NULL, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing FILL pattern!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* Read fill pattern address. */ + ret = sb_token_to_long(tok, &pattern); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect FILL pattern!\n", + cmd->lineno); + goto err; + } + + tok = strtok(NULL, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing FILL length!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* Read fill pattern address. */ + ret = sb_token_to_long(tok, &length); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect FILL length!\n", + cmd->lineno); + goto err; + } + + /* + * Construct the command. + */ + ccmd->header.checksum = 0x5a; + ccmd->header.tag = ROM_FILL_CMD; + + ccmd->fill.address = address; + ccmd->fill.count = length; + ccmd->fill.pattern = pattern; + + cctx->size = sizeof(*ccmd); + + /* + * Append the command to the last section. + */ + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + return 0; + +err: + free(cctx); + return ret; +} + +static int sb_build_command_jump_call(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd, + unsigned int is_call) +{ + struct sb_section_ctx *sctx = ictx->sect_tail; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + char *tok; + uint32_t dest, arg = 0x0; + uint32_t hab = 0; + int ret; + const char *cmdname = is_call ? "CALL" : "JUMP"; + + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + + ccmd = &cctx->payload; + + /* + * Prepare the command. + */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, + "#%i ERR: Missing %s address or 'HAB'!\n", + cmd->lineno, cmdname); + ret = -EINVAL; + goto err; + } + + /* Check for "HAB" flag. */ + if (!strcmp(tok, "HAB")) { + hab = is_call ? ROM_CALL_CMD_FLAG_HAB : ROM_JUMP_CMD_FLAG_HAB; + tok = strtok(NULL, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing %s address!\n", + cmd->lineno, cmdname); + ret = -EINVAL; + goto err; + } + } + /* Read load destination address. */ + ret = sb_token_to_long(tok, &dest); + if (ret) { + fprintf(stderr, "#%i ERR: Incorrect %s address!\n", + cmd->lineno, cmdname); + goto err; + } + + tok = strtok(NULL, " "); + if (tok) { + ret = sb_token_to_long(tok, &arg); + if (ret) { + fprintf(stderr, + "#%i ERR: Incorrect %s argument!\n", + cmd->lineno, cmdname); + goto err; + } + } + + /* + * Construct the command. + */ + ccmd->header.checksum = 0x5a; + ccmd->header.tag = is_call ? ROM_CALL_CMD : ROM_JUMP_CMD; + ccmd->header.flags = hab; + + ccmd->call.address = dest; + ccmd->call.argument = arg; + + cctx->size = sizeof(*ccmd); + + /* + * Append the command to the last section. + */ + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + return 0; + +err: + free(cctx); + return ret; +} + +static int sb_build_command_jump(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd) +{ + return sb_build_command_jump_call(ictx, cmd, 0); +} + +static int sb_build_command_call(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd) +{ + return sb_build_command_jump_call(ictx, cmd, 1); +} + +static int sb_build_command_mode(struct sb_image_ctx *ictx, + struct sb_cmd_list *cmd) +{ + struct sb_section_ctx *sctx = ictx->sect_tail; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + char *tok; + int ret; + unsigned int i; + uint32_t mode = 0xffffffff; + + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + + ccmd = &cctx->payload; + + /* + * Prepare the command. + */ + tok = strtok(cmd->cmd, " "); + if (!tok) { + fprintf(stderr, "#%i ERR: Missing MODE boot mode argument!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + for (i = 0; i < ARRAY_SIZE(modetable); i++) { + if (!strcmp(tok, modetable[i].name)) { + mode = modetable[i].mode; + break; + } + + if (!modetable[i].altname) + continue; + + if (!strcmp(tok, modetable[i].altname)) { + mode = modetable[i].mode; + break; + } + } + + if (mode == 0xffffffff) { + fprintf(stderr, "#%i ERR: Invalid MODE boot mode argument!\n", + cmd->lineno); + ret = -EINVAL; + goto err; + } + + /* + * Construct the command. + */ + ccmd->header.checksum = 0x5a; + ccmd->header.tag = ROM_MODE_CMD; + + ccmd->mode.mode = mode; + + cctx->size = sizeof(*ccmd); + + /* + * Append the command to the last section. + */ + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + return 0; + +err: + free(cctx); + return ret; +} + +static int sb_prefill_image_header(struct sb_image_ctx *ictx) +{ + struct sb_boot_image_header *hdr = &ictx->payload; + + /* Fill signatures */ + memcpy(hdr->signature1, "STMP", 4); + memcpy(hdr->signature2, "sgtl", 4); + + /* SB Image version 1.1 */ + hdr->major_version = SB_VERSION_MAJOR; + hdr->minor_version = SB_VERSION_MINOR; + + /* Boot image major version */ + hdr->product_version.major = htons(0x999); + hdr->product_version.minor = htons(0x999); + hdr->product_version.revision = htons(0x999); + /* Boot image major version */ + hdr->component_version.major = htons(0x999); + hdr->component_version.minor = htons(0x999); + hdr->component_version.revision = htons(0x999); + + /* Drive tag must be 0x0 for i.MX23 */ + hdr->drive_tag = 0; + + hdr->header_blocks = + sizeof(struct sb_boot_image_header) / SB_BLOCK_SIZE; + hdr->section_header_size = + sizeof(struct sb_sections_header) / SB_BLOCK_SIZE; + hdr->timestamp_us = sb_get_timestamp() * 1000000; + + /* FIXME -- add proper config option */ + hdr->flags = ictx->verbose_boot ? SB_IMAGE_FLAG_VERBOSE : 0, + + /* FIXME -- We support only default key */ + hdr->key_count = 1; + + return 0; +} + +static int sb_postfill_image_header(struct sb_image_ctx *ictx) +{ + struct sb_boot_image_header *hdr = &ictx->payload; + struct sb_section_ctx *sctx = ictx->sect_head; + uint32_t kd_size, sections_blocks; + EVP_MD_CTX md_ctx; + + /* The main SB header size in blocks. */ + hdr->image_blocks = hdr->header_blocks; + + /* Size of the key dictionary, which has single zero entry. */ + kd_size = hdr->key_count * sizeof(struct sb_key_dictionary_key); + hdr->image_blocks += kd_size / SB_BLOCK_SIZE; + + /* Now count the payloads. */ + hdr->section_count = ictx->sect_count; + while (sctx) { + hdr->image_blocks += sctx->size / SB_BLOCK_SIZE; + sctx = sctx->sect; + } + + if (!ictx->sect_boot_found) { + fprintf(stderr, "ERR: No bootable section selected!\n"); + return -EINVAL; + } + hdr->first_boot_section_id = ictx->sect_boot; + + /* The n * SB section size in blocks. */ + sections_blocks = hdr->section_count * hdr->section_header_size; + hdr->image_blocks += sections_blocks; + + /* Key dictionary offset. */ + hdr->key_dictionary_block = hdr->header_blocks + sections_blocks; + + /* Digest of the whole image. */ + hdr->image_blocks += 2; + + /* Pointer past the dictionary. */ + hdr->first_boot_tag_block = + hdr->key_dictionary_block + kd_size / SB_BLOCK_SIZE; + + /* Compute header digest. */ + EVP_MD_CTX_init(&md_ctx); + + EVP_DigestInit(&md_ctx, EVP_sha1()); + EVP_DigestUpdate(&md_ctx, hdr->signature1, + sizeof(struct sb_boot_image_header) - + sizeof(hdr->digest)); + EVP_DigestFinal(&md_ctx, hdr->digest, NULL); + + return 0; +} + +static int sb_fixup_sections_and_tags(struct sb_image_ctx *ictx) +{ + /* Fixup the placement of sections. */ + struct sb_boot_image_header *ihdr = &ictx->payload; + struct sb_section_ctx *sctx = ictx->sect_head; + struct sb_sections_header *shdr; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + uint32_t offset = ihdr->first_boot_tag_block; + + while (sctx) { + shdr = &sctx->payload; + + /* Fill in the section TAG offset. */ + shdr->section_offset = offset + 1; + offset += shdr->section_size; + + /* Section length is measured from the TAG block. */ + shdr->section_size--; + + /* Fixup the TAG command. */ + cctx = sctx->cmd_head; + while (cctx) { + ccmd = &cctx->payload; + if (ccmd->header.tag == ROM_TAG_CMD) { + ccmd->tag.section_number = shdr->section_number; + ccmd->tag.section_length = shdr->section_size; + ccmd->tag.section_flags = shdr->section_flags; + } + + /* Update the command checksum. */ + ccmd->header.checksum = sb_command_checksum(ccmd); + + cctx = cctx->cmd; + } + + sctx = sctx->sect; + } + + return 0; +} + +static int sb_parse_line(struct sb_image_ctx *ictx, struct sb_cmd_list *cmd) +{ + char *tok; + char *line = cmd->cmd; + char *rptr; + int ret; + + /* Analyze the identifier on this line first. */ + tok = strtok_r(line, " ", &rptr); + if (!tok || (strlen(tok) == 0)) { + fprintf(stderr, "#%i ERR: Invalid line!\n", cmd->lineno); + return -EINVAL; + } + + cmd->cmd = rptr; + + /* DCD */ + if (!strcmp(tok, "DCD")) { + ictx->in_section = 0; + ictx->in_dcd = 1; + sb_build_dcd(ictx, cmd); + return 0; + } + + /* Section */ + if (!strcmp(tok, "SECTION")) { + ictx->in_section = 1; + ictx->in_dcd = 0; + sb_build_section(ictx, cmd); + return 0; + } + + if (!ictx->in_section && !ictx->in_dcd) { + fprintf(stderr, "#%i ERR: Data outside of a section!\n", + cmd->lineno); + return -EINVAL; + } + + if (ictx->in_section) { + /* Section commands */ + if (!strcmp(tok, "NOP")) { + ret = sb_build_command_nop(ictx); + } else if (!strcmp(tok, "TAG")) { + ret = sb_build_command_tag(ictx, cmd); + } else if (!strcmp(tok, "LOAD")) { + ret = sb_build_command_load(ictx, cmd); + } else if (!strcmp(tok, "FILL")) { + ret = sb_build_command_fill(ictx, cmd); + } else if (!strcmp(tok, "JUMP")) { + ret = sb_build_command_jump(ictx, cmd); + } else if (!strcmp(tok, "CALL")) { + ret = sb_build_command_call(ictx, cmd); + } else if (!strcmp(tok, "MODE")) { + ret = sb_build_command_mode(ictx, cmd); + } else { + fprintf(stderr, + "#%i ERR: Unsupported instruction '%s'!\n", + cmd->lineno, tok); + return -ENOTSUP; + } + } else if (ictx->in_dcd) { + char *lptr; + uint32_t ilen = '1'; + + tok = strtok_r(tok, ".", &lptr); + if (!tok || (strlen(tok) == 0) || (lptr && strlen(lptr) != 1)) { + fprintf(stderr, "#%i ERR: Invalid line!\n", + cmd->lineno); + return -EINVAL; + } + + if (lptr && + (lptr[0] != '1' && lptr[0] != '2' && lptr[0] != '4')) { + fprintf(stderr, "#%i ERR: Invalid instruction width!\n", + cmd->lineno); + return -EINVAL; + } + + if (lptr) + ilen = lptr[0] - '1'; + + /* DCD commands */ + if (!strcmp(tok, "WRITE")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_WRITE | ilen); + } else if (!strcmp(tok, "ANDC")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_ANDC | ilen); + } else if (!strcmp(tok, "ORR")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_ORR | ilen); + } else if (!strcmp(tok, "EQZ")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_CHK_EQZ | ilen); + } else if (!strcmp(tok, "EQ")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_CHK_EQ | ilen); + } else if (!strcmp(tok, "NEQ")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_CHK_NEQ | ilen); + } else if (!strcmp(tok, "NEZ")) { + ret = sb_build_dcd_block(ictx, cmd, + SB_DCD_CHK_NEZ | ilen); + } else if (!strcmp(tok, "NOOP")) { + ret = sb_build_dcd_block(ictx, cmd, SB_DCD_NOOP); + } else { + fprintf(stderr, + "#%i ERR: Unsupported instruction '%s'!\n", + cmd->lineno, tok); + return -ENOTSUP; + } + } else { + fprintf(stderr, "#%i ERR: Unsupported instruction '%s'!\n", + cmd->lineno, tok); + return -ENOTSUP; + } + + /* + * Here we have at least one section with one command, otherwise we + * would have failed already higher above. + * + * FIXME -- should the updating happen here ? + */ + if (ictx->in_section && !ret) { + ictx->sect_tail->size += ictx->sect_tail->cmd_tail->size; + ictx->sect_tail->payload.section_size = + ictx->sect_tail->size / SB_BLOCK_SIZE; + } + + return ret; +} + +static int sb_load_cmdfile(struct sb_image_ctx *ictx) +{ + struct sb_cmd_list cmd; + int lineno = 1; + FILE *fp; + char *line = NULL; + ssize_t rlen; + size_t len; + + fp = fopen(ictx->cfg_filename, "r"); + if (!fp) + goto err_file; + + while ((rlen = getline(&line, &len, fp)) > 0) { + memset(&cmd, 0, sizeof(cmd)); + + /* Strip the trailing newline. */ + line[rlen - 1] = '\0'; + + cmd.cmd = line; + cmd.len = rlen; + cmd.lineno = lineno++; + + sb_parse_line(ictx, &cmd); + } + + free(line); + + fclose(fp); + + return 0; + +err_file: + fclose(fp); + fprintf(stderr, "ERR: Failed to load file \"%s\"\n", + ictx->cfg_filename); + return -EINVAL; +} + +static int sb_build_tree_from_cfg(struct sb_image_ctx *ictx) +{ + int ret; + + ret = sb_load_cmdfile(ictx); + if (ret) + return ret; + + ret = sb_prefill_image_header(ictx); + if (ret) + return ret; + + ret = sb_postfill_image_header(ictx); + if (ret) + return ret; + + ret = sb_fixup_sections_and_tags(ictx); + if (ret) + return ret; + + return 0; +} + +static int sb_verify_image_header(struct sb_image_ctx *ictx, + FILE *fp, long fsize) +{ + /* Verify static fields in the image header. */ + struct sb_boot_image_header *hdr = &ictx->payload; + const char *stat[2] = { "[PASS]", "[FAIL]" }; + struct tm tm; + int sz, ret = 0; + unsigned char digest[20]; + EVP_MD_CTX md_ctx; + unsigned long size; + + /* Start image-wide crypto. */ + EVP_MD_CTX_init(&ictx->md_ctx); + EVP_DigestInit(&ictx->md_ctx, EVP_sha1()); + + soprintf(ictx, "---------- Verifying SB Image Header ----------\n"); + + size = fread(&ictx->payload, 1, sizeof(ictx->payload), fp); + if (size != sizeof(ictx->payload)) { + fprintf(stderr, "ERR: SB image header too short!\n"); + return -EINVAL; + } + + /* Compute header digest. */ + EVP_MD_CTX_init(&md_ctx); + EVP_DigestInit(&md_ctx, EVP_sha1()); + EVP_DigestUpdate(&md_ctx, hdr->signature1, + sizeof(struct sb_boot_image_header) - + sizeof(hdr->digest)); + EVP_DigestFinal(&md_ctx, digest, NULL); + + sb_aes_init(ictx, NULL, 1); + sb_encrypt_sb_header(ictx); + + if (memcmp(digest, hdr->digest, 20)) + ret = -EINVAL; + soprintf(ictx, "%s Image header checksum: %s\n", stat[!!ret], + ret ? "BAD" : "OK"); + if (ret) + return ret; + + if (memcmp(hdr->signature1, "STMP", 4) || + memcmp(hdr->signature2, "sgtl", 4)) + ret = -EINVAL; + soprintf(ictx, "%s Signatures: '%.4s' '%.4s'\n", + stat[!!ret], hdr->signature1, hdr->signature2); + if (ret) + return ret; + + if ((hdr->major_version != SB_VERSION_MAJOR) || + ((hdr->minor_version != 1) && (hdr->minor_version != 2))) + ret = -EINVAL; + soprintf(ictx, "%s Image version: v%i.%i\n", stat[!!ret], + hdr->major_version, hdr->minor_version); + if (ret) + return ret; + + ret = sb_get_time(hdr->timestamp_us / 1000000, &tm); + soprintf(ictx, + "%s Creation time: %02i:%02i:%02i %02i/%02i/%04i\n", + stat[!!ret], tm.tm_hour, tm.tm_min, tm.tm_sec, + tm.tm_mday, tm.tm_mon, tm.tm_year + 2000); + if (ret) + return ret; + + soprintf(ictx, "%s Product version: %x.%x.%x\n", stat[0], + ntohs(hdr->product_version.major), + ntohs(hdr->product_version.minor), + ntohs(hdr->product_version.revision)); + soprintf(ictx, "%s Component version: %x.%x.%x\n", stat[0], + ntohs(hdr->component_version.major), + ntohs(hdr->component_version.minor), + ntohs(hdr->component_version.revision)); + + if (hdr->flags & ~SB_IMAGE_FLAG_VERBOSE) + ret = -EINVAL; + soprintf(ictx, "%s Image flags: %s\n", stat[!!ret], + hdr->flags & SB_IMAGE_FLAG_VERBOSE ? "Verbose_boot" : ""); + if (ret) + return ret; + + if (hdr->drive_tag != 0) + ret = -EINVAL; + soprintf(ictx, "%s Drive tag: %i\n", stat[!!ret], + hdr->drive_tag); + if (ret) + return ret; + + sz = sizeof(struct sb_boot_image_header) / SB_BLOCK_SIZE; + if (hdr->header_blocks != sz) + ret = -EINVAL; + soprintf(ictx, "%s Image header size (blocks): %i\n", stat[!!ret], + hdr->header_blocks); + if (ret) + return ret; + + sz = sizeof(struct sb_sections_header) / SB_BLOCK_SIZE; + if (hdr->section_header_size != sz) + ret = -EINVAL; + soprintf(ictx, "%s Section header size (blocks): %i\n", stat[!!ret], + hdr->section_header_size); + if (ret) + return ret; + + soprintf(ictx, "%s Sections count: %i\n", stat[!!ret], + hdr->section_count); + soprintf(ictx, "%s First bootable section %i\n", stat[!!ret], + hdr->first_boot_section_id); + + if (hdr->image_blocks != fsize / SB_BLOCK_SIZE) + ret = -EINVAL; + soprintf(ictx, "%s Image size (blocks): %i\n", stat[!!ret], + hdr->image_blocks); + if (ret) + return ret; + + sz = hdr->header_blocks + hdr->section_header_size * hdr->section_count; + if (hdr->key_dictionary_block != sz) + ret = -EINVAL; + soprintf(ictx, "%s Key dict offset (blocks): %i\n", stat[!!ret], + hdr->key_dictionary_block); + if (ret) + return ret; + + if (hdr->key_count != 1) + ret = -EINVAL; + soprintf(ictx, "%s Number of encryption keys: %i\n", stat[!!ret], + hdr->key_count); + if (ret) + return ret; + + sz = hdr->header_blocks + hdr->section_header_size * hdr->section_count; + sz += hdr->key_count * + sizeof(struct sb_key_dictionary_key) / SB_BLOCK_SIZE; + if (hdr->first_boot_tag_block != (unsigned)sz) + ret = -EINVAL; + soprintf(ictx, "%s First TAG block (blocks): %i\n", stat[!!ret], + hdr->first_boot_tag_block); + if (ret) + return ret; + + return 0; +} + +static void sb_decrypt_tag(struct sb_image_ctx *ictx, + struct sb_cmd_ctx *cctx) +{ + EVP_MD_CTX *md_ctx = &ictx->md_ctx; + struct sb_command *cmd = &cctx->payload; + + sb_aes_crypt(ictx, (uint8_t *)&cctx->c_payload, + (uint8_t *)&cctx->payload, sizeof(*cmd)); + EVP_DigestUpdate(md_ctx, &cctx->c_payload, sizeof(*cmd)); +} + +static int sb_verify_command(struct sb_image_ctx *ictx, + struct sb_cmd_ctx *cctx, FILE *fp, + unsigned long *tsize) +{ + struct sb_command *ccmd = &cctx->payload; + unsigned long size, asize; + char *csum, *flag = ""; + int ret; + unsigned int i; + uint8_t csn, csc = ccmd->header.checksum; + ccmd->header.checksum = 0x5a; + csn = sb_command_checksum(ccmd); + ccmd->header.checksum = csc; + + if (csc == csn) + ret = 0; + else + ret = -EINVAL; + csum = ret ? "checksum BAD" : "checksum OK"; + + switch (ccmd->header.tag) { + case ROM_NOP_CMD: + soprintf(ictx, " NOOP # %s\n", csum); + return ret; + case ROM_TAG_CMD: + if (ccmd->header.flags & ROM_TAG_CMD_FLAG_ROM_LAST_TAG) + flag = "LAST"; + soprintf(ictx, " TAG %s # %s\n", flag, csum); + sb_aes_reinit(ictx, 0); + return ret; + case ROM_LOAD_CMD: + soprintf(ictx, " LOAD addr=0x%08x length=0x%08x # %s\n", + ccmd->load.address, ccmd->load.count, csum); + + cctx->length = ccmd->load.count; + asize = roundup(cctx->length, SB_BLOCK_SIZE); + cctx->data = malloc(asize); + if (!cctx->data) + return -ENOMEM; + + size = fread(cctx->data, 1, asize, fp); + if (size != asize) { + fprintf(stderr, + "ERR: SB LOAD command payload too short!\n"); + return -EINVAL; + } + + *tsize += size; + + EVP_DigestUpdate(&ictx->md_ctx, cctx->data, asize); + sb_aes_crypt(ictx, cctx->data, cctx->data, asize); + + if (ccmd->load.crc32 != crc32(cctx->data, asize)) { + fprintf(stderr, + "ERR: SB LOAD command payload CRC32 invalid!\n"); + return -EINVAL; + } + return 0; + case ROM_FILL_CMD: + soprintf(ictx, + " FILL addr=0x%08x length=0x%08x pattern=0x%08x # %s\n", + ccmd->fill.address, ccmd->fill.count, + ccmd->fill.pattern, csum); + return 0; + case ROM_JUMP_CMD: + if (ccmd->header.flags & ROM_JUMP_CMD_FLAG_HAB) + flag = " HAB"; + soprintf(ictx, + " JUMP%s addr=0x%08x r0_arg=0x%08x # %s\n", + flag, ccmd->fill.address, ccmd->jump.argument, csum); + return 0; + case ROM_CALL_CMD: + if (ccmd->header.flags & ROM_CALL_CMD_FLAG_HAB) + flag = " HAB"; + soprintf(ictx, + " CALL%s addr=0x%08x r0_arg=0x%08x # %s\n", + flag, ccmd->fill.address, ccmd->jump.argument, csum); + return 0; + case ROM_MODE_CMD: + for (i = 0; i < ARRAY_SIZE(modetable); i++) { + if (ccmd->mode.mode == modetable[i].mode) { + soprintf(ictx, " MODE %s # %s\n", + modetable[i].name, csum); + break; + } + } + fprintf(stderr, " MODE !INVALID! # %s\n", csum); + return 0; + } + + return ret; +} + +static int sb_verify_commands(struct sb_image_ctx *ictx, + struct sb_section_ctx *sctx, FILE *fp) +{ + unsigned long size, tsize = 0; + struct sb_cmd_ctx *cctx; + int ret; + + sb_aes_reinit(ictx, 0); + + while (tsize < sctx->size) { + cctx = calloc(1, sizeof(*cctx)); + if (!cctx) + return -ENOMEM; + if (!sctx->cmd_head) { + sctx->cmd_head = cctx; + sctx->cmd_tail = cctx; + } else { + sctx->cmd_tail->cmd = cctx; + sctx->cmd_tail = cctx; + } + + size = fread(&cctx->c_payload, 1, sizeof(cctx->c_payload), fp); + if (size != sizeof(cctx->c_payload)) { + fprintf(stderr, "ERR: SB command header too short!\n"); + return -EINVAL; + } + + tsize += size; + + sb_decrypt_tag(ictx, cctx); + + ret = sb_verify_command(ictx, cctx, fp, &tsize); + if (ret) + return -EINVAL; + } + + return 0; +} + +static int sb_verify_sections_cmds(struct sb_image_ctx *ictx, FILE *fp) +{ + struct sb_boot_image_header *hdr = &ictx->payload; + struct sb_sections_header *shdr; + unsigned int i; + int ret; + struct sb_section_ctx *sctx; + unsigned long size; + char *bootable = ""; + + soprintf(ictx, "----- Verifying SB Sections and Commands -----\n"); + + for (i = 0; i < hdr->section_count; i++) { + sctx = calloc(1, sizeof(*sctx)); + if (!sctx) + return -ENOMEM; + if (!ictx->sect_head) { + ictx->sect_head = sctx; + ictx->sect_tail = sctx; + } else { + ictx->sect_tail->sect = sctx; + ictx->sect_tail = sctx; + } + + size = fread(&sctx->payload, 1, sizeof(sctx->payload), fp); + if (size != sizeof(sctx->payload)) { + fprintf(stderr, "ERR: SB section header too short!\n"); + return -EINVAL; + } + } + + size = fread(&ictx->sb_dict_key, 1, sizeof(ictx->sb_dict_key), fp); + if (size != sizeof(ictx->sb_dict_key)) { + fprintf(stderr, "ERR: SB key dictionary too short!\n"); + return -EINVAL; + } + + sb_encrypt_sb_sections_header(ictx); + sb_aes_reinit(ictx, 0); + sb_decrypt_key_dictionary_key(ictx); + + sb_aes_reinit(ictx, 0); + + sctx = ictx->sect_head; + while (sctx) { + shdr = &sctx->payload; + + if (shdr->section_flags & SB_SECTION_FLAG_BOOTABLE) { + sctx->boot = 1; + bootable = " BOOTABLE"; + } + + sctx->size = (shdr->section_size * SB_BLOCK_SIZE) + + sizeof(struct sb_command); + soprintf(ictx, "SECTION 0x%x%s # size = %i bytes\n", + shdr->section_number, bootable, sctx->size); + + if (shdr->section_flags & ~SB_SECTION_FLAG_BOOTABLE) + fprintf(stderr, " WARN: Unknown section flag(s) %08x\n", + shdr->section_flags); + + if ((shdr->section_flags & SB_SECTION_FLAG_BOOTABLE) && + (hdr->first_boot_section_id != shdr->section_number)) { + fprintf(stderr, + " WARN: Bootable section does ID not match image header ID!\n"); + } + + ret = sb_verify_commands(ictx, sctx, fp); + if (ret) + return ret; + + sctx = sctx->sect; + } + + /* + * FIXME IDEA: + * check if the first TAG command is at sctx->section_offset + */ + return 0; +} + +static int sb_verify_image_end(struct sb_image_ctx *ictx, + FILE *fp, off_t filesz) +{ + uint8_t digest[32]; + unsigned long size; + off_t pos; + int ret; + + soprintf(ictx, "------------- Verifying image end -------------\n"); + + size = fread(digest, 1, sizeof(digest), fp); + if (size != sizeof(digest)) { + fprintf(stderr, "ERR: SB key dictionary too short!\n"); + return -EINVAL; + } + + pos = ftell(fp); + if (pos != filesz) { + fprintf(stderr, "ERR: Trailing data past the image!\n"); + return -EINVAL; + } + + /* Check the image digest. */ + EVP_DigestFinal(&ictx->md_ctx, ictx->digest, NULL); + + /* Decrypt the image digest from the input image. */ + sb_aes_reinit(ictx, 0); + sb_aes_crypt(ictx, digest, digest, sizeof(digest)); + + /* Check all of 20 bytes of the SHA1 hash. */ + ret = memcmp(digest, ictx->digest, 20) ? -EINVAL : 0; + + if (ret) + soprintf(ictx, "[FAIL] Full-image checksum: BAD\n"); + else + soprintf(ictx, "[PASS] Full-image checksum: OK\n"); + + return ret; +} + + +static int sb_build_tree_from_img(struct sb_image_ctx *ictx) +{ + long filesize; + int ret; + FILE *fp; + + if (!ictx->input_filename) { + fprintf(stderr, "ERR: Missing filename!\n"); + return -EINVAL; + } + + fp = fopen(ictx->input_filename, "r"); + if (!fp) + goto err_open; + + ret = fseek(fp, 0, SEEK_END); + if (ret < 0) + goto err_file; + + filesize = ftell(fp); + if (filesize < 0) + goto err_file; + + ret = fseek(fp, 0, SEEK_SET); + if (ret < 0) + goto err_file; + + if (filesize < (signed)sizeof(ictx->payload)) { + fprintf(stderr, "ERR: File too short!\n"); + goto err_file; + } + + if (filesize & (SB_BLOCK_SIZE - 1)) { + fprintf(stderr, "ERR: The file is not aligned!\n"); + goto err_file; + } + + /* Load and verify image header */ + ret = sb_verify_image_header(ictx, fp, filesize); + if (ret) + goto err_verify; + + /* Load and verify sections and commands */ + ret = sb_verify_sections_cmds(ictx, fp); + if (ret) + goto err_verify; + + ret = sb_verify_image_end(ictx, fp, filesize); + if (ret) + goto err_verify; + + ret = 0; + +err_verify: + soprintf(ictx, "-------------------- Result -------------------\n"); + soprintf(ictx, "Verification %s\n", ret ? "FAILED" : "PASSED"); + + /* Stop the encryption session. */ + sb_aes_deinit(&ictx->cipher_ctx); + + fclose(fp); + return ret; + +err_file: + fclose(fp); +err_open: + fprintf(stderr, "ERR: Failed to load file \"%s\"\n", + ictx->input_filename); + return -EINVAL; +} + +static void sb_free_image(struct sb_image_ctx *ictx) +{ + struct sb_section_ctx *sctx = ictx->sect_head, *s_head; + struct sb_dcd_ctx *dctx = ictx->dcd_head, *d_head; + struct sb_cmd_ctx *cctx, *c_head; + + while (sctx) { + s_head = sctx; + c_head = sctx->cmd_head; + + while (c_head) { + cctx = c_head; + c_head = c_head->cmd; + if (cctx->data) + free(cctx->data); + free(cctx); + } + + sctx = sctx->sect; + free(s_head); + } + + while (dctx) { + d_head = dctx; + dctx = dctx->dcd; + free(d_head->payload); + free(d_head); + } +} + +/* + * MXSSB-MKIMAGE glue code. + */ +static int mxsimage_check_image_types(uint8_t type) +{ + if (type == IH_TYPE_MXSIMAGE) + return EXIT_SUCCESS; + else + return EXIT_FAILURE; +} + +static void mxsimage_set_header(void *ptr, struct stat *sbuf, int ifd, + struct mkimage_params *params) +{ +} + +int mxsimage_check_params(struct mkimage_params *params) +{ + if (!params) + return -1; + if (!strlen(params->imagename)) { + fprintf(stderr, + "Error: %s - Configuration file not specified, it is needed for mxsimage generation\n", + params->cmdname); + return -1; + } + + /* + * Check parameters: + * XIP is not allowed and verify that incompatible + * parameters are not sent at the same time + * For example, if list is required a data image must not be provided + */ + return (params->dflag && (params->fflag || params->lflag)) || + (params->fflag && (params->dflag || params->lflag)) || + (params->lflag && (params->dflag || params->fflag)) || + (params->xflag) || !(strlen(params->imagename)); +} + +static int mxsimage_verify_print_header(char *file, int silent) +{ + int ret; + struct sb_image_ctx ctx; + + memset(&ctx, 0, sizeof(ctx)); + + ctx.input_filename = file; + ctx.silent_dump = silent; + + ret = sb_build_tree_from_img(&ctx); + sb_free_image(&ctx); + + return ret; +} + +char *imagefile; +static int mxsimage_verify_header(unsigned char *ptr, int image_size, + struct mkimage_params *params) +{ + struct sb_boot_image_header *hdr; + + if (!ptr) + return -EINVAL; + + hdr = (struct sb_boot_image_header *)ptr; + + /* + * Check if the header contains the MXS image signatures, + * if so, do a full-image verification. + */ + if (memcmp(hdr->signature1, "STMP", 4) || + memcmp(hdr->signature2, "sgtl", 4)) + return -EINVAL; + + imagefile = params->imagefile; + + return mxsimage_verify_print_header(params->imagefile, 1); +} + +static void mxsimage_print_header(const void *hdr) +{ + if (imagefile) + mxsimage_verify_print_header(imagefile, 0); +} + +static int sb_build_image(struct sb_image_ctx *ictx, + struct image_type_params *tparams) +{ + struct sb_boot_image_header *sb_header = &ictx->payload; + struct sb_section_ctx *sctx; + struct sb_cmd_ctx *cctx; + struct sb_command *ccmd; + struct sb_key_dictionary_key *sb_dict_key = &ictx->sb_dict_key; + + uint8_t *image, *iptr; + + /* Calculate image size. */ + uint32_t size = sizeof(*sb_header) + + ictx->sect_count * sizeof(struct sb_sections_header) + + sizeof(*sb_dict_key) + sizeof(ictx->digest); + + sctx = ictx->sect_head; + while (sctx) { + size += sctx->size; + sctx = sctx->sect; + }; + + image = malloc(size); + if (!image) + return -ENOMEM; + iptr = image; + + memcpy(iptr, sb_header, sizeof(*sb_header)); + iptr += sizeof(*sb_header); + + sctx = ictx->sect_head; + while (sctx) { + memcpy(iptr, &sctx->payload, sizeof(struct sb_sections_header)); + iptr += sizeof(struct sb_sections_header); + sctx = sctx->sect; + }; + + memcpy(iptr, sb_dict_key, sizeof(*sb_dict_key)); + iptr += sizeof(*sb_dict_key); + + sctx = ictx->sect_head; + while (sctx) { + cctx = sctx->cmd_head; + while (cctx) { + ccmd = &cctx->payload; + + memcpy(iptr, &cctx->c_payload, sizeof(cctx->payload)); + iptr += sizeof(cctx->payload); + + if (ccmd->header.tag == ROM_LOAD_CMD) { + memcpy(iptr, cctx->data, cctx->length); + iptr += cctx->length; + } + + cctx = cctx->cmd; + } + + sctx = sctx->sect; + }; + + memcpy(iptr, ictx->digest, sizeof(ictx->digest)); + iptr += sizeof(ictx->digest); + + /* Configure the mkimage */ + tparams->hdr = image; + tparams->header_size = size; + + return 0; +} + +static int mxsimage_generate(struct mkimage_params *params, + struct image_type_params *tparams) +{ + int ret; + struct sb_image_ctx ctx; + + /* Do not copy the U-Boot image! */ + params->skipcpy = 1; + + memset(&ctx, 0, sizeof(ctx)); + + ctx.cfg_filename = params->imagename; + ctx.output_filename = params->imagefile; + ctx.verbose_boot = 1; + + ret = sb_build_tree_from_cfg(&ctx); + if (ret) + goto fail; + + ret = sb_encrypt_image(&ctx); + if (!ret) + ret = sb_build_image(&ctx, tparams); + +fail: + sb_free_image(&ctx); + + return ret; +} + +/* + * mxsimage parameters + */ +static struct image_type_params mxsimage_params = { + .name = "Freescale MXS Boot Image support", + .header_size = 0, + .hdr = NULL, + .check_image_type = mxsimage_check_image_types, + .verify_header = mxsimage_verify_header, + .print_header = mxsimage_print_header, + .set_header = mxsimage_set_header, + .check_params = mxsimage_check_params, + .vrec_header = mxsimage_generate, +}; + +void init_mxs_image_type(void) +{ + mkimage_register(&mxsimage_params); +} + +#else +void init_mxs_image_type(void) +{ +} +#endif diff --git a/tools/mxsimage.h b/tools/mxsimage.h new file mode 100644 index 0000000000..6cd59d2dbb --- /dev/null +++ b/tools/mxsimage.h @@ -0,0 +1,230 @@ +/* + * Freescale i.MX28 SB image generator + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MXSSB_H__ +#define __MXSSB_H__ + +#include <stdint.h> +#include <arpa/inet.h> + +#define SB_BLOCK_SIZE 16 + +#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +struct sb_boot_image_version { + uint16_t major; + uint16_t pad0; + uint16_t minor; + uint16_t pad1; + uint16_t revision; + uint16_t pad2; +}; + +struct sb_boot_image_header { + union { + /* SHA1 of the header. */ + uint8_t digest[20]; + struct { + /* CBC-MAC initialization vector. */ + uint8_t iv[16]; + uint8_t extra[4]; + }; + }; + /* 'STMP' */ + uint8_t signature1[4]; + /* Major version of the image format. */ + uint8_t major_version; + /* Minor version of the image format. */ + uint8_t minor_version; + /* Flags associated with the image. */ + uint16_t flags; + /* Size of the image in 16b blocks. */ + uint32_t image_blocks; + /* Offset of the first tag in 16b blocks. */ + uint32_t first_boot_tag_block; + /* ID of the section to boot from. */ + uint32_t first_boot_section_id; + /* Amount of crypto keys. */ + uint16_t key_count; + /* Offset to the key dictionary in 16b blocks. */ + uint16_t key_dictionary_block; + /* Size of this header in 16b blocks. */ + uint16_t header_blocks; + /* Amount of section headers. */ + uint16_t section_count; + /* Section header size in 16b blocks. */ + uint16_t section_header_size; + /* Padding to align timestamp to uint64_t. */ + uint8_t padding0[2]; + /* 'sgtl' (since v1.1) */ + uint8_t signature2[4]; + /* Image generation date, in microseconds since 1.1.2000 . */ + uint64_t timestamp_us; + /* Product version. */ + struct sb_boot_image_version + product_version; + /* Component version. */ + struct sb_boot_image_version + component_version; + /* Drive tag for the system drive. (since v1.1) */ + uint16_t drive_tag; + /* Padding. */ + uint8_t padding1[6]; +}; + +#define SB_VERSION_MAJOR 1 +#define SB_VERSION_MINOR 1 + +/* Enable to HTLLC verbose boot report. */ +#define SB_IMAGE_FLAG_VERBOSE (1 << 0) + +struct sb_key_dictionary_key { + /* The CBC-MAC of image and sections header. */ + uint8_t cbc_mac[SB_BLOCK_SIZE]; + /* The AES key encrypted by image key (zero). */ + uint8_t key[SB_BLOCK_SIZE]; +}; + +struct sb_ivt_header { + uint32_t header; + uint32_t entry; + uint32_t reserved1; + uint32_t dcd; + uint32_t boot_data; + uint32_t self; + uint32_t csf; + uint32_t reserved2; +}; + +#define SB_HAB_IVT_TAG 0xd1UL +#define SB_HAB_DCD_TAG 0xd2UL + +#define SB_HAB_VERSION 0x40UL + +/* + * The "size" field in the IVT header is not naturally aligned, + * use this macro to fill first 4 bytes of the IVT header without + * causing issues on some systems (esp. M68k, PPC, MIPS-BE, ARM-BE). + */ +static inline uint32_t sb_hab_ivt_header(void) +{ + uint32_t ret = 0; + ret |= SB_HAB_IVT_TAG << 24; + ret |= sizeof(struct sb_ivt_header) << 16; + ret |= SB_HAB_VERSION; + return htonl(ret); +} + +struct sb_sections_header { + /* Section number. */ + uint32_t section_number; + /* Offset of this sections first instruction after "TAG". */ + uint32_t section_offset; + /* Size of the section in 16b blocks. */ + uint32_t section_size; + /* Section flags. */ + uint32_t section_flags; +}; + +#define SB_SECTION_FLAG_BOOTABLE (1 << 0) + +struct sb_command { + struct { + uint8_t checksum; + uint8_t tag; + uint16_t flags; +#define ROM_TAG_CMD_FLAG_ROM_LAST_TAG 0x1 +#define ROM_LOAD_CMD_FLAG_DCD_LOAD 0x1 /* MX28 only */ +#define ROM_JUMP_CMD_FLAG_HAB 0x1 /* MX28 only */ +#define ROM_CALL_CMD_FLAG_HAB 0x1 /* MX28 only */ + } header; + + union { + struct { + uint32_t reserved[3]; + } nop; + struct { + uint32_t section_number; + uint32_t section_length; + uint32_t section_flags; + } tag; + struct { + uint32_t address; + uint32_t count; + uint32_t crc32; + } load; + struct { + uint32_t address; + uint32_t count; + uint32_t pattern; + } fill; + struct { + uint32_t address; + uint32_t reserved; + /* Passed in register r0 before JUMP */ + uint32_t argument; + } jump; + struct { + uint32_t address; + uint32_t reserved; + /* Passed in register r0 before CALL */ + uint32_t argument; + } call; + struct { + uint32_t reserved1; + uint32_t reserved2; + uint32_t mode; + } mode; + + }; +}; + +/* + * Most of the mode names are same or at least similar + * on i.MX23 and i.MX28, but some of the mode names + * differ. The "name" field represents the mode name + * on i.MX28 as seen in Table 12-2 of the datasheet. + * The "altname" field represents the differently named + * fields on i.MX23 as seen in Table 35-3 of the + * datasheet. + */ +static const struct { + const char *name; + const char *altname; + const uint8_t mode; +} modetable[] = { + { "USB", NULL, 0x00 }, + { "I2C", NULL, 0x01 }, + { "SPI2_FLASH", "SPI1_FLASH", 0x02 }, + { "SPI3_FLASH", "SPI2_FLASH", 0x03 }, + { "NAND_BCH", NULL, 0x04 }, + { "JTAG", NULL, 0x06 }, + { "SPI3_EEPROM", "SPI2_EEPROM", 0x08 }, + { "SD_SSP0", NULL, 0x09 }, + { "SD_SSP1", NULL, 0x0A } +}; + +enum sb_tag { + ROM_NOP_CMD = 0x00, + ROM_TAG_CMD = 0x01, + ROM_LOAD_CMD = 0x02, + ROM_FILL_CMD = 0x03, + ROM_JUMP_CMD = 0x04, + ROM_CALL_CMD = 0x05, + ROM_MODE_CMD = 0x06 +}; + +struct sb_source_entry { + uint8_t tag; + uint32_t address; + uint32_t flags; + char *filename; +}; + +#endif /* __MXSSB_H__ */ diff --git a/tools/omapimage.c b/tools/omapimage.c index d4d77d8858..00853dd741 100644 --- a/tools/omapimage.c +++ b/tools/omapimage.c @@ -14,9 +14,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "omapimage.h" diff --git a/tools/pblimage.c b/tools/pblimage.c index 4542a9c10f..bac5faff98 100644 --- a/tools/pblimage.c +++ b/tools/pblimage.c @@ -3,8 +3,6 @@ * * SPDX-License-Identifier: GPL-2.0+ */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "pblimage.h" diff --git a/tools/ublimage.c b/tools/ublimage.c index 6495db6d6a..b4ef7f080e 100644 --- a/tools/ublimage.c +++ b/tools/ublimage.c @@ -13,9 +13,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "ublimage.h" |
