summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/include/asm/arch-omap3/mem.h26
-rw-r--r--board/ti/evm/config.mk33
-rw-r--r--board/ti/evm/evm.c41
-rw-r--r--include/configs/omap3_evm.h35
-rw-r--r--include/configs/omap3_evm_common.h30
-rw-r--r--include/configs/omap3_evm_quick_mmc.h10
-rw-r--r--include/configs/omap3_evm_quick_nand.h22
7 files changed, 159 insertions, 38 deletions
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 4ea5f74f48..5fd02d4dfc 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -123,6 +123,32 @@ enum {
V_MCFG_BANKALLOCATION_RBC | \
V_MCFG_B32NOT16_32 | V_MCFG_DEEPPD_EN | V_MCFG_RAMTYPE_DDR
+/* Hynix part of AM/DM37xEVM (200MHz optimized) */
+#define HYNIX_TDAL_200 6
+#define HYNIX_TDPL_200 3
+#define HYNIX_TRRD_200 2
+#define HYNIX_TRCD_200 4
+#define HYNIX_TRP_200 3
+#define HYNIX_TRAS_200 8
+#define HYNIX_TRC_200 11
+#define HYNIX_TRFC_200 18
+#define HYNIX_V_ACTIMA_200 \
+ ACTIM_CTRLA(HYNIX_TRFC_200, HYNIX_TRC_200, \
+ HYNIX_TRAS_200, HYNIX_TRP_200, \
+ HYNIX_TRCD_200, HYNIX_TRRD_200, \
+ HYNIX_TDPL_200, HYNIX_TDAL_200)
+
+#define HYNIX_TWTR_200 2
+#define HYNIX_TCKE_200 1
+#define HYNIX_TXP_200 1
+#define HYNIX_XSR_200 28
+#define HYNIX_V_ACTIMB_200 \
+ ACTIM_CTRLB(HYNIX_TWTR_200, HYNIX_TCKE_200, \
+ HYNIX_TXP_200, HYNIX_XSR_200)
+
+#define HYNIX_RASWIDTH_200 0x3
+#define HYNIX_V_MCFG_200(size) MCFG((size), HYNIX_RASWIDTH_200)
+
/* Infineon part of 3430SDP (165MHz optimized) 6.06ns */
#define INFINEON_TDAL_165 6 /* Twr/Tck + Trp/tck */
/* 15/6 + 18/6 = 5.5 -> 6 */
diff --git a/board/ti/evm/config.mk b/board/ti/evm/config.mk
deleted file mode 100644
index d173eef094..0000000000
--- a/board/ti/evm/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2006 - 2008
-# Texas Instruments, <www.ti.com>
-#
-# EVM uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 8c434633dd..8497aee6de 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2004-2008
+ * (C) Copyright 2004-2011
* Texas Instruments, <www.ti.com>
*
* Author :
@@ -37,6 +37,7 @@
#include <asm/gpio.h>
#include <i2c.h>
#include <asm/mach-types.h>
+#include <linux/mtd/nand.h>
#include "evm.h"
#define OMAP3EVM_GPIO_ETH_RST_GEN1 64
@@ -119,6 +120,42 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank. This
+ * provides the timing values back to the function that configures
+ * the memory.
+ */
+void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
+ u32 *mr)
+{
+ int pop_mfr, pop_id;
+
+ /*
+ * We need to identify what PoP memory is on the board so that
+ * we know what timings to use. To map the ID values please see
+ * nand_ids.c
+ */
+ identify_nand_chip(&pop_mfr, &pop_id);
+
+ if (pop_mfr == NAND_MFR_HYNIX && pop_id == 0xbc) {
+ /* 256MB DDR */
+ *mcfg = HYNIX_V_MCFG_200(256 << 20);
+ *ctrla = HYNIX_V_ACTIMA_200;
+ *ctrlb = HYNIX_V_ACTIMB_200;
+ } else {
+ /* 128MB DDR */
+ *mcfg = MICRON_V_MCFG_165(128 << 20);
+ *ctrla = MICRON_V_ACTIMA_165;
+ *ctrlb = MICRON_V_ACTIMB_165;
+ }
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+ *mr = MICRON_V_MR_165;
+}
+#endif
+
/*
* Routine: misc_init_r
* Description: Init ethernet (done here so udelay works)
@@ -238,7 +275,7 @@ int board_eth_init(bd_t *bis)
}
#endif /* CONFIG_CMD_NET */
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0);
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 9228ef1402..2ce3959fda 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -83,8 +83,21 @@
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
+
+/* SPL */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+/* Partition tables */
+/* Only need DOS partition support for SPL, currently */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_EFI_PARTITION
+#endif
+#define CONFIG_DOS_PARTITION
/* USB
*
@@ -95,6 +108,26 @@
#define CONFIG_MUSB_HCD
/* #define CONFIG_MUSB_UDC */
+/* NAND SPL */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
+ 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
+ CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
+ CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+
/* -----------------------------------------------------------------------------
* Include common board configuration
* -----------------------------------------------------------------------------
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index d62d2abe37..b256317905 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -26,7 +26,6 @@
#define CONFIG_SDRC /* The chip has SDRC controller */
#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */
-#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */
#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */
#undef CONFIG_USE_IRQ /* no support for IRQs */
@@ -65,7 +64,6 @@
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE (32 << 20)
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/* Limits for memtest */
@@ -282,4 +280,32 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0x40200800
+#define CONFIG_SPL_MAX_SIZE (45 * 1024) /* 45 KB */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+
#endif /* __OMAP3_EVM_COMMON_H */
diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h
index 691e4c2984..912da7d074 100644
--- a/include/configs/omap3_evm_quick_mmc.h
+++ b/include/configs/omap3_evm_quick_mmc.h
@@ -88,4 +88,14 @@
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait"
+/*
+ * SPL
+ */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
#endif /* __OMAP3_EVM_QUICK_MMC_H */
diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h
index 2d183140d7..2f879c0bf1 100644
--- a/include/configs/omap3_evm_quick_nand.h
+++ b/include/configs/omap3_evm_quick_nand.h
@@ -76,4 +76,26 @@
"root=/dev/mtdblock4 rw " \
"rootfstype=jffs2 "
+/*
+ * SPL
+ */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
+ 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
+ CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
+ CONFIG_SYS_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+
#endif /* __OMAP3_EVM_QUICK_NAND_H */