diff options
51 files changed, 2817 insertions, 738 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 00e06b7c2c..5cbc845639 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -194,6 +194,10 @@ Niklaus Giger <niklaus.giger@netstal.com> MCU25 PPC405GPr HCU5 PPC440EPx +Siddarth Gore <gores@marvell.com> + + guruplug ARM926EJS (Kirkwood SoC) + Frank Gottschling <fgottschling@eltec.de> MHPC MPC8xx @@ -739,6 +743,10 @@ Jens Scharsig <esw@bus-elektronik.de> eb_cpux9k2 ARM920T (AT91RM9200 SoC) +Heiko Schocher <hs@denx.de> + + magnesium i.MX27 + Robert Schwebel <r.schwebel@pengutronix.de> csb226 xscale @@ -569,8 +569,10 @@ LIST_ARM9=" \ edb9312 \ edb9315 \ edb9315a \ + guruplug \ imx27lite \ lpd7a400 \ + magnesium \ mv88f6281gtw_ge \ mx1ads \ mx1fs2 \ @@ -2943,6 +2943,10 @@ davinci_dm365evm_config : unconfig davinci_dm6467evm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci +guruplug_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + +magnesium_config \ imx27lite_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index 694841dd10..b80a389ed9 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -111,7 +111,7 @@ int print_cpuinfo (void) char buf[32]; printf ("CPU: Freescale i.MX25 at %s MHz\n\n", - strmhz (buf, imx_get_mpllclk ())); + strmhz (buf, imx_get_armclk ())); return 0; } #endif diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c index 30cf544712..ae2ce5841c 100644 --- a/arch/arm/cpu/arm926ejs/mx27/generic.c +++ b/arch/arm/cpu/arm926ejs/mx27/generic.c @@ -316,6 +316,23 @@ void mx27_fec_init_pins(void) #endif /* CONFIG_FEC_MXC */ #ifdef CONFIG_MXC_MMC +void mx27_sd1_init_pins(void) +{ + int i; + unsigned int mode[] = { + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + }; + + for (i = 0; i < ARRAY_SIZE(mode); i++) + imx_gpio_mode(mode[i]); + +} + void mx27_sd2_init_pins(void) { int i; diff --git a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S b/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S index 31af9e2b58..783c81f72a 100644 --- a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S +++ b/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S @@ -158,6 +158,7 @@ /* Switch peripheral to PLL 3 */ ldr r0, =CCM_BASE_ADDR ldr r1, =0x000010C0 + orr r1,r1,#CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] ldr r1, =0x13239145 str r1, [r0, #CLKCTL_CBCDR] @@ -171,6 +172,7 @@ ldr r1, =0x19239145 str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x000020C0 + orr r1,r1,#CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] mov r3, #DP_OP_216 @@ -201,9 +203,10 @@ /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ ldr r1, =0x000020C2 + orr r1,r1,#CONFIG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ - ldr r1, =0x59E35100 + ldr r1, =CONFIG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] /* Restore the default values in the Gate registers */ diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile b/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile index 01c93feda8..3785593d25 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile +++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile @@ -33,7 +33,6 @@ SOBJS += reset.o COBJS += clock.o COBJS += cpu_info.o -COBJS += gpio.o COBJS += sromc.o COBJS += timer.o diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h b/arch/arm/include/asm/arch-at91/at91_matrix.h index 981ec2029c..f99b1d4cbf 100644 --- a/arch/arm/include/asm/arch-at91/at91_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91_matrix.h @@ -113,4 +113,142 @@ typedef struct at91_matrix { #define AT91_MATRIX_CSA_EBI1_CS2A 0x00000008 +#if defined CONFIG_AT91SAM9261 +/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_MCFG_RCB0 (1 << 0) +/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_MCFG_RCB1 (1 << 1) +#endif + +/* Undefined Length Burst Type */ +#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) || \ + defined(CONFIG_AT91SAM9G45) +#define AT91_MATRIX_MCFG_ULBT_INFINITE 0x00000000 +#define AT91_MATRIX_MCFG_ULBT_SINGLE 0x00000001 +#define AT91_MATRIX_MCFG_ULBT_FOUR 0x00000002 +#define AT91_MATRIX_MCFG_ULBT_EIGHT 0x00000003 +#define AT91_MATRIX_MCFG_ULBT_SIXTEEN 0x00000004 +#endif +#if defined(CONFIG_AT91SAM9G45) +#define AT91_MATRIX_MCFG_ULBT_THIRTYTWO 0x00000005 +#define AT91_MATRIX_MCFG_ULBT_SIXTYFOUR 0x00000006 +#define AT91_MATRIX_MCFG_ULBT_128 0x00000007 +#endif + +/* Default Master Type */ +#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_NONE 0x00000000 +#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_LAST 0x00010000 +#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED 0x00020000 + +/* Fixed Index of Default Master */ +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9263) +#define AT91_MATRIX_SCFG_FIXED_DEFMSTR(x) ((x & 0xf) << 18) +#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9260) +#define AT91_MATRIX_SCFG_FIXED_DEFMSTR(x) ((x & 7) << 18) +#endif + +/* Maximum Number of Allowed Cycles for a Burst */ +#if defined(CONFIG_AT91SAM9G45) +#define AT91_MATRIX_SCFG_SLOT_CYCLE(x) ((x & 0x1ff) << 0) +#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \ + defined(CONFIG_AT91SAM9263) +#define AT91_MATRIX_SCFG_SLOT_CYCLE(x) ((x & 0xff) << 0) +#endif + +/* Arbitration Type */ +#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) +#define AT91_MATRIX_SCFG_ARBT_ROUND_ROBIN 0x00000000 +#define AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY 0x01000000 +#endif + +/* Master Remap Control Register */ +#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) || \ + defined(CONFIG_AT91SAM9G45) +/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_MRCR_RCB0 (1 << 0) +/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_MRCR_RCB1 (1 << 1) +#endif +#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G45) +#define AT91_MATRIX_MRCR_RCB2 0x00000004 +#define AT91_MATRIX_MRCR_RCB3 0x00000008 +#define AT91_MATRIX_MRCR_RCB4 0x00000010 +#define AT91_MATRIX_MRCR_RCB5 0x00000020 +#define AT91_MATRIX_MRCR_RCB6 0x00000040 +#define AT91_MATRIX_MRCR_RCB7 0x00000080 +#define AT91_MATRIX_MRCR_RCB8 0x00000100 +#endif +#if defined(CONFIG_AT91SAM9G45) +#define AT91_MATRIX_MRCR_RCB9 0x00000200 +#define AT91_MATRIX_MRCR_RCB10 0x00000400 +#define AT91_MATRIX_MRCR_RCB11 0x00000800 +#endif + +/* TCM Configuration Register */ +#if defined(CONFIG_AT91SAM9G45) +/* Size of ITCM enabled memory block */ +#define AT91_MATRIX_TCMR_ITCM_0 0x00000000 +#define AT91_MATRIX_TCMR_ITCM_32 0x00000040 +/* Size of DTCM enabled memory block */ +#define AT91_MATRIX_TCMR_DTCM_0 0x00000000 +#define AT91_MATRIX_TCMR_DTCM_32 0x00000060 +#define AT91_MATRIX_TCMR_DTCM_64 0x00000070 +/* Wait state TCM register */ +#define AT91_MATRIX_TCMR_TCM_NO_WS 0x00000000 +#define AT91_MATRIX_TCMR_TCM_ONE_WS 0x00000800 +#endif +#if defined(CONFIG_AT91SAM9263) +/* Size of ITCM enabled memory block */ +#define AT91_MATRIX_TCMR_ITCM_0 0x00000000 +#define AT91_MATRIX_TCMR_ITCM_16 0x00000005 +#define AT91_MATRIX_TCMR_ITCM_32 0x00000006 +/* Size of DTCM enabled memory block */ +#define AT91_MATRIX_TCMR_DTCM_0 0x00000000 +#define AT91_MATRIX_TCMR_DTCM_16 0x00000050 +#define AT91_MATRIX_TCMR_DTCM_32 0x00000060 +#endif +#if defined(CONFIG_AT91SAM9261) +/* Size of ITCM enabled memory block */ +#define AT91_MATRIX_TCMR_ITCM_0 0x00000000 +#define AT91_MATRIX_TCMR_ITCM_16 0x00000005 +#define AT91_MATRIX_TCMR_ITCM_32 0x00000006 +#define AT91_MATRIX_TCMR_ITCM_64 0x00000007 +/* Size of DTCM enabled memory block */ +#define AT91_MATRIX_TCMR_DTCM_0 0x00000000 +#define AT91_MATRIX_TCMR_DTCM_16 0x00000050 +#define AT91_MATRIX_TCMR_DTCM_32 0x00000060 +#define AT91_MATRIX_TCMR_DTCM_64 0x00000070 +#endif + +#if defined(CONFIG_AT91SAM9G45) +/* Video Mode Configuration Register */ +#define AT91C_MATRIX_VDEC_SEL_OFF 0x00000000 +#define AT91C_MATRIX_VDEC_SEL_ON 0x00000001 +/* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WP_WPDIS 0x00000000 +#define AT91_MATRIX_WPMR_WP_WPEN 0x00000001 +#define AT91_MATRIX_WPMR_WPKEY 0xFFFFFF00 /* Write Protect KEY */ +/* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_NO_WPV 0x00000000 +#define AT91_MATRIX_WPSR_WPV 0x00000001 +#define AT91_MATRIX_WPSR_WPVSRC 0x00FFFF00 /* Write Protect Violation Source */ +#endif + +/* USB Pad Pull-Up Control Register */ +#if defined(CONFIG_AT91SAM9261) +#define AT91_MATRIX_USBPUCR_PUON 0x40000000 +#endif + +#define AT91_MATRIX_PRA_M0(x) ((x & 3) << 0) /* Master 0 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M1(x) ((x & 3) << 4) /* Master 1 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M2(x) ((x & 3) << 8) /* Master 2 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M3(x) ((x & 3) << 12) /* Master 3 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M4(x) ((x & 3) << 16) /* Master 4 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M5(x) ((x & 3) << 20) /* Master 5 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M6(x) ((x & 3) << 24) /* Master 6 Priority Reg. A*/ +#define AT91_MATRIX_PRA_M7(x) ((x & 3) << 28) /* Master 7 Priority Reg. A*/ +#define AT91_MATRIX_PRB_M8(x) ((x & 3) << 0) /* Master 8 Priority Reg. B) */ +#define AT91_MATRIX_PRB_M9(x) ((x & 3) << 4) /* Master 9 Priority Reg. B) */ +#define AT91_MATRIX_PRB_M10(x) ((x & 3) << 8) /* Master 10 Priority Reg. B) */ + #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h index a60a0811c0..ec04318036 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9260.h +++ b/arch/arm/include/asm/arch-at91/at91sam9260.h @@ -56,8 +56,10 @@ #define AT91_PIO_BASE 0xfffff400 #define AT91_PMC_BASE 0xfffffc00 #define AT91_RSTC_BASE 0xfffffd00 +#define AT91_RTT_BASE 0xfffffd20 #define AT91_PIT_BASE 0xfffffd30 #define AT91_WDT_BASE 0xfffffd40 +#define AT91_GPR_BASE 0xfffffd50 #ifdef CONFIG_AT91_LEGACY diff --git a/arch/arm/include/asm/arch-at91/at91sam9261.h b/arch/arm/include/asm/arch-at91/at91sam9261.h index 2952292c5d..7ca0283135 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9261.h +++ b/arch/arm/include/asm/arch-at91/at91sam9261.h @@ -49,8 +49,10 @@ #define AT91_PIO_BASE 0xfffff400 #define AT91_PMC_BASE 0xfffffc00 #define AT91_RSTC_BASE 0xfffffd00 +#define AT91_RTT_BASE 0xfffffd20 #define AT91_PIT_BASE 0xfffffd30 #define AT91_WDT_BASE 0xfffffd40 +#define AT91_GPBR_BASE 0xfffffd50 #ifdef CONFIG_AT91_LEGACY diff --git a/arch/arm/include/asm/arch-at91/at91sam9263.h b/arch/arm/include/asm/arch-at91/at91sam9263.h index c177bd059e..4ada1ceaf8 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9263.h +++ b/arch/arm/include/asm/arch-at91/at91sam9263.h @@ -61,8 +61,11 @@ #define AT91_PIO_BASE 0xfffff200 #define AT91_PMC_BASE 0xfffffc00 #define AT91_RSTC_BASE 0xfffffd00 +#define AT91_RTT0_BASE 0xfffffd20 #define AT91_PIT_BASE 0xfffffd30 #define AT91_WDT_BASE 0xfffffd40 +#define AT91_RTT1_BASE 0xfffffd50 +#define AT91_GPBR_BASE 0xfffffd60 #ifdef CONFIG_AT91_LEGACY diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index d36a6da96d..6ecddaae85 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -37,6 +37,7 @@ extern void mx27_fec_init_pins(void); #endif /* CONFIG_FEC_MXC */ #ifdef CONFIG_MXC_MMC +extern void mx27_sd1_init_pins(void); extern void mx27_sd2_init_pins(void); #endif /* CONFIG_MXC_MMC */ diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/mx31-regs.h index 6f6e9a4048..d72585c8a0 100644 --- a/arch/arm/include/asm/arch-mx31/mx31-regs.h +++ b/arch/arm/include/asm/arch-mx31/mx31-regs.h @@ -207,6 +207,15 @@ struct clock_control_regs { #define MUX_CTL_CSPI1_SS0 0x8e #define MUX_CTL_CSPI1_SS1 0x8f +#define MUX_CTL_NFC_WP 0xD0 +#define MUX_CTL_NFC_CE 0xD1 +#define MUX_CTL_NFC_RB 0xD2 +#define MUX_CTL_NFC_WE 0xD4 +#define MUX_CTL_NFC_RE 0xD5 +#define MUX_CTL_NFC_ALE 0xD6 +#define MUX_CTL_NFC_CLE 0xD7 + + /* * Helper macros for the MUX_[contact name]__[pin function] macros */ @@ -294,4 +303,10 @@ struct clock_control_regs { */ #define NFC_BASE_ADDR 0xB8000000 +/* + * Internal RAM (16KB) + */ +#define IRAM_BASE_ADDR 0x1FFFC000 +#define IRAM_SIZE (16 * 1024) + #endif /* __ASM_ARCH_MX31_REGS_H */ diff --git a/arch/arm/include/asm/arch-mx31/mx31.h b/arch/arm/include/asm/arch-mx31/mx31.h index 3cc4b350b6..f702d260f1 100644 --- a/arch/arm/include/asm/arch-mx31/mx31.h +++ b/arch/arm/include/asm/arch-mx31/mx31.h @@ -37,12 +37,17 @@ enum mx31_gpio_direction { extern int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction); extern void mx31_gpio_set(unsigned int gpio, unsigned int value); +extern int mx31_gpio_get(unsigned int gpio); #else static inline int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction) { return 1; } +static inline int mx31_gpio_get(unsigned int gpio) +{ + return 1; +} static inline void mx31_gpio_set(unsigned int gpio, unsigned int value) { } diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index 8e4bb863f9..9a7faed319 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -22,7 +22,7 @@ #define __ASM_ARCH_GPIO_H #ifndef __ASSEMBLY__ -struct s5pc1xx_gpio_bank { +struct s5p_gpio_bank { unsigned int con; unsigned int dat; unsigned int pull; @@ -33,107 +33,107 @@ struct s5pc1xx_gpio_bank { }; struct s5pc100_gpio { - struct s5pc1xx_gpio_bank gpio_a0; - struct s5pc1xx_gpio_bank gpio_a1; - struct s5pc1xx_gpio_bank gpio_b; - struct s5pc1xx_gpio_bank gpio_c; - struct s5pc1xx_gpio_bank gpio_d; - struct s5pc1xx_gpio_bank gpio_e0; - struct s5pc1xx_gpio_bank gpio_e1; - struct s5pc1xx_gpio_bank gpio_f0; - struct s5pc1xx_gpio_bank gpio_f1; - struct s5pc1xx_gpio_bank gpio_f2; - struct s5pc1xx_gpio_bank gpio_f3; - struct s5pc1xx_gpio_bank gpio_g0; - struct s5pc1xx_gpio_bank gpio_g1; - struct s5pc1xx_gpio_bank gpio_g2; - struct s5pc1xx_gpio_bank gpio_g3; - struct s5pc1xx_gpio_bank gpio_i; - struct s5pc1xx_gpio_bank gpio_j0; - struct s5pc1xx_gpio_bank gpio_j1; - struct s5pc1xx_gpio_bank gpio_j2; - struct s5pc1xx_gpio_bank gpio_j3; - struct s5pc1xx_gpio_bank gpio_j4; - struct s5pc1xx_gpio_bank gpio_k0; - struct s5pc1xx_gpio_bank gpio_k1; - struct s5pc1xx_gpio_bank gpio_k2; - struct s5pc1xx_gpio_bank gpio_k3; - struct s5pc1xx_gpio_bank gpio_l0; - struct s5pc1xx_gpio_bank gpio_l1; - struct s5pc1xx_gpio_bank gpio_l2; - struct s5pc1xx_gpio_bank gpio_l3; - struct s5pc1xx_gpio_bank gpio_l4; - struct s5pc1xx_gpio_bank gpio_h0; - struct s5pc1xx_gpio_bank gpio_h1; - struct s5pc1xx_gpio_bank gpio_h2; - struct s5pc1xx_gpio_bank gpio_h3; + struct s5p_gpio_bank gpio_a0; + struct s5p_gpio_bank gpio_a1; + struct s5p_gpio_bank gpio_b; + struct s5p_gpio_bank gpio_c; + struct s5p_gpio_bank gpio_d; + struct s5p_gpio_bank gpio_e0; + struct s5p_gpio_bank gpio_e1; + struct s5p_gpio_bank gpio_f0; + struct s5p_gpio_bank gpio_f1; + struct s5p_gpio_bank gpio_f2; + struct s5p_gpio_bank gpio_f3; + struct s5p_gpio_bank gpio_g0; + struct s5p_gpio_bank gpio_g1; + struct s5p_gpio_bank gpio_g2; + struct s5p_gpio_bank gpio_g3; + struct s5p_gpio_bank gpio_i; + struct s5p_gpio_bank gpio_j0; + struct s5p_gpio_bank gpio_j1; + struct s5p_gpio_bank gpio_j2; + struct s5p_gpio_bank gpio_j3; + struct s5p_gpio_bank gpio_j4; + struct s5p_gpio_bank gpio_k0; + struct s5p_gpio_bank gpio_k1; + struct s5p_gpio_bank gpio_k2; + struct s5p_gpio_bank gpio_k3; + struct s5p_gpio_bank gpio_l0; + struct s5p_gpio_bank gpio_l1; + struct s5p_gpio_bank gpio_l2; + struct s5p_gpio_bank gpio_l3; + struct s5p_gpio_bank gpio_l4; + struct s5p_gpio_bank gpio_h0; + struct s5p_gpio_bank gpio_h1; + struct s5p_gpio_bank gpio_h2; + struct s5p_gpio_bank gpio_h3; }; struct s5pc110_gpio { - struct s5pc1xx_gpio_bank gpio_a0; - struct s5pc1xx_gpio_bank gpio_a1; - struct s5pc1xx_gpio_bank gpio_b; - struct s5pc1xx_gpio_bank gpio_c0; - struct s5pc1xx_gpio_bank gpio_c1; - struct s5pc1xx_gpio_bank gpio_d0; - struct s5pc1xx_gpio_bank gpio_d1; - struct s5pc1xx_gpio_bank gpio_e0; - struct s5pc1xx_gpio_bank gpio_e1; - struct s5pc1xx_gpio_bank gpio_f0; - struct s5pc1xx_gpio_bank gpio_f1; - struct s5pc1xx_gpio_bank gpio_f2; - struct s5pc1xx_gpio_bank gpio_f3; - struct s5pc1xx_gpio_bank gpio_g0; - struct s5pc1xx_gpio_bank gpio_g1; - struct s5pc1xx_gpio_bank gpio_g2; - struct s5pc1xx_gpio_bank gpio_g3; - struct s5pc1xx_gpio_bank gpio_i; - struct s5pc1xx_gpio_bank gpio_j0; - struct s5pc1xx_gpio_bank gpio_j1; - struct s5pc1xx_gpio_bank gpio_j2; - struct s5pc1xx_gpio_bank gpio_j3; - struct s5pc1xx_gpio_bank gpio_j4; - struct s5pc1xx_gpio_bank gpio_mp0_1; - struct s5pc1xx_gpio_bank gpio_mp0_2; - struct s5pc1xx_gpio_bank gpio_mp0_3; - struct s5pc1xx_gpio_bank gpio_mp0_4; - struct s5pc1xx_gpio_bank gpio_mp0_5; - struct s5pc1xx_gpio_bank gpio_mp0_6; - struct s5pc1xx_gpio_bank gpio_mp0_7; - struct s5pc1xx_gpio_bank gpio_mp1_0; - struct s5pc1xx_gpio_bank gpio_mp1_1; - struct s5pc1xx_gpio_bank gpio_mp1_2; - struct s5pc1xx_gpio_bank gpio_mp1_3; - struct s5pc1xx_gpio_bank gpio_mp1_4; - struct s5pc1xx_gpio_bank gpio_mp1_5; - struct s5pc1xx_gpio_bank gpio_mp1_6; - struct s5pc1xx_gpio_bank gpio_mp1_7; - struct s5pc1xx_gpio_bank gpio_mp1_8; - struct s5pc1xx_gpio_bank gpio_mp2_0; - struct s5pc1xx_gpio_bank gpio_mp2_1; - struct s5pc1xx_gpio_bank gpio_mp2_2; - struct s5pc1xx_gpio_bank gpio_mp2_3; - struct s5pc1xx_gpio_bank gpio_mp2_4; - struct s5pc1xx_gpio_bank gpio_mp2_5; - struct s5pc1xx_gpio_bank gpio_mp2_6; - struct s5pc1xx_gpio_bank gpio_mp2_7; - struct s5pc1xx_gpio_bank gpio_mp2_8; - struct s5pc1xx_gpio_bank res1[48]; - struct s5pc1xx_gpio_bank gpio_h0; - struct s5pc1xx_gpio_bank gpio_h1; - struct s5pc1xx_gpio_bank gpio_h2; - struct s5pc1xx_gpio_bank gpio_h3; + struct s5p_gpio_bank gpio_a0; + struct s5p_gpio_bank gpio_a1; + struct s5p_gpio_bank gpio_b; + struct s5p_gpio_bank gpio_c0; + struct s5p_gpio_bank gpio_c1; + struct s5p_gpio_bank gpio_d0; + struct s5p_gpio_bank gpio_d1; + struct s5p_gpio_bank gpio_e0; + struct s5p_gpio_bank gpio_e1; + struct s5p_gpio_bank gpio_f0; + struct s5p_gpio_bank gpio_f1; + struct s5p_gpio_bank gpio_f2; + struct s5p_gpio_bank gpio_f3; + struct s5p_gpio_bank gpio_g0; + struct s5p_gpio_bank gpio_g1; + struct s5p_gpio_bank gpio_g2; + struct s5p_gpio_bank gpio_g3; + struct s5p_gpio_bank gpio_i; + struct s5p_gpio_bank gpio_j0; + struct s5p_gpio_bank gpio_j1; + struct s5p_gpio_bank gpio_j2; + struct s5p_gpio_bank gpio_j3; + struct s5p_gpio_bank gpio_j4; + struct s5p_gpio_bank gpio_mp0_1; + struct s5p_gpio_bank gpio_mp0_2; + struct s5p_gpio_bank gpio_mp0_3; + struct s5p_gpio_bank gpio_mp0_4; + struct s5p_gpio_bank gpio_mp0_5; + struct s5p_gpio_bank gpio_mp0_6; + struct s5p_gpio_bank gpio_mp0_7; + struct s5p_gpio_bank gpio_mp1_0; + struct s5p_gpio_bank gpio_mp1_1; + struct s5p_gpio_bank gpio_mp1_2; + struct s5p_gpio_bank gpio_mp1_3; + struct s5p_gpio_bank gpio_mp1_4; + struct s5p_gpio_bank gpio_mp1_5; + struct s5p_gpio_bank gpio_mp1_6; + struct s5p_gpio_bank gpio_mp1_7; + struct s5p_gpio_bank gpio_mp1_8; + struct s5p_gpio_bank gpio_mp2_0; + struct s5p_gpio_bank gpio_mp2_1; + struct s5p_gpio_bank gpio_mp2_2; + struct s5p_gpio_bank gpio_mp2_3; + struct s5p_gpio_bank gpio_mp2_4; + struct s5p_gpio_bank gpio_mp2_5; + struct s5p_gpio_bank gpio_mp2_6; + struct s5p_gpio_bank gpio_mp2_7; + struct s5p_gpio_bank gpio_mp2_8; + struct s5p_gpio_bank res1[48]; + struct s5p_gpio_bank gpio_h0; + struct s5p_gpio_bank gpio_h1; + struct s5p_gpio_bank gpio_h2; + struct s5p_gpio_bank gpio_h3; }; /* functions */ -void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg); -void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en); -void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio); -void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en); -unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio); -void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode); -void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode); -void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode); +void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg); +void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en); +void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio); +void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en); +unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio); +void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode); +void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode); +void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h index 140dbdc45f..2d7ad7ec98 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/uart.h +++ b/arch/arm/include/asm/arch-s5pc1xx/uart.h @@ -24,7 +24,7 @@ #define __ASM_ARCH_UART_H_ #ifndef __ASSEMBLY__ -struct s5pc1xx_uart { +struct s5p_uart { unsigned int ulcon; unsigned int ucon; unsigned int ufcon; diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 4622557b57..b33e97b5fa 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -2659,7 +2659,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_AQUILA 2676 #define MACH_TYPE_SPARK_SLS_HW2 2677 #define MACH_TYPE_ESATA_SHEEVAPLUG 2678 -#define MACH_TYPE_SURF7X30 2679 +#define MACH_TYPE_MSM7X30_SURF 2679 #define MACH_TYPE_MICRO2440 2680 #define MACH_TYPE_AM2440 2681 #define MACH_TYPE_TQ2440 2682 @@ -2693,12 +2693,86 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_QSD8X50_FFA 2710 #define MACH_TYPE_QSD8X50A_SURF 2711 #define MACH_TYPE_QSD8X50A_FFA 2712 -#define MACH_TYPE_XGCP10 2713 +#define MACH_TYPE_ADX_XGCP10 2713 #define MACH_TYPE_MCGWUMTS2A 2714 #define MACH_TYPE_MOBIKT 2715 #define MACH_TYPE_MX53_EVK 2716 #define MACH_TYPE_IGEP0030 2717 #define MACH_TYPE_AXELL_H40_H50_CTRL 2718 +#define MACH_TYPE_DTCOMMOD 2719 +#define MACH_TYPE_GOULD 2720 +#define MACH_TYPE_SIBERIA 2721 +#define MACH_TYPE_SBC3530 2722 +#define MACH_TYPE_QARM 2723 +#define MACH_TYPE_MIPS 2724 +#define MACH_TYPE_MX27GRB 2725 +#define MACH_TYPE_SBC8100 2726 +#define MACH_TYPE_SAARB 2727 +#define MACH_TYPE_OMAP3MINI 2728 +#define MACH_TYPE_CNMBOOK7SE 2729 +#define MACH_TYPE_CATAN 2730 +#define MACH_TYPE_HARMONY 2731 +#define MACH_TYPE_TONGA 2732 +#define MACH_TYPE_CYBOOK_ORIZON 2733 +#define MACH_TYPE_HTCRHODIUMCDMA 2734 +#define MACH_TYPE_EPC_G45 2735 +#define MACH_TYPE_EPC_LPC3250 2736 +#define MACH_TYPE_MXC91341EVB 2737 +#define MACH_TYPE_RTW1000 2738 +#define MACH_TYPE_BOBCAT 2739 +#define MACH_TYPE_TRIZEPS6 2740 +#define MACH_TYPE_MSM7X30_FLUID 2741 +#define MACH_TYPE_NEDAP9263 2742 +#define MACH_TYPE_NETGEAR_MS2110 2743 +#define MACH_TYPE_BMX 2744 +#define MACH_TYPE_NETSTREAM 2745 +#define MACH_TYPE_VPNEXT_RCU 2746 +#define MACH_TYPE_VPNEXT_MPU 2747 +#define MACH_TYPE_BCMRING_TABLET_V1 2748 +#define MACH_TYPE_SGARM10 2749 +#define MACH_TYPE_CM_T3517 2750 +#define MACH_TYPE_OMAP3_CPS 2751 +#define MACH_TYPE_AXAR1500_RECEIVER 2752 +#define MACH_TYPE_WBD222 2753 +#define MACH_TYPE_MT65XX 2754 +#define MACH_TYPE_MSM8X60_SURF 2755 +#define MACH_TYPE_MSM8X60_SIM 2756 +#define MACH_TYPE_VMC300 2757 +#define MACH_TYPE_TCC8000_SDK 2758 +#define MACH_TYPE_NANOS 2759 +#define MACH_TYPE_STAMP9G10 2760 +#define MACH_TYPE_STAMP9G45 2761 +#define MACH_TYPE_H6053 2762 +#define MACH_TYPE_SMINT01 2763 +#define MACH_TYPE_PRTLVT2 2764 +#define MACH_TYPE_AP420 2765 +#define MACH_TYPE_HTCSHIFT 2766 +#define MACH_TYPE_DAVINCI_DM365_FC 2767 +#define MACH_TYPE_MSM8X55_SURF 2768 +#define MACH_TYPE_MSM8X55_FFA 2769 +#define MACH_TYPE_ESL_VAMANA 2770 +#define MACH_TYPE_SBC35 2771 +#define MACH_TYPE_MPX6446 2772 +#define MACH_TYPE_OREO_CONTROLLER 2773 +#define MACH_TYPE_KOPIN_MODELS 2774 +#define MACH_TYPE_TTC_VISION2 2775 +#define MACH_TYPE_CNS3420VB 2776 +#define MACH_TYPE_LPC2 2777 +#define MACH_TYPE_OLYMPUS 2778 +#define MACH_TYPE_VORTEX 2779 +#define MACH_TYPE_S5PC200 2780 +#define MACH_TYPE_ECUCORE_9263 2781 +#define MACH_TYPE_SMDKC200 2782 +#define MACH_TYPE_EMSISO_SX27 2783 +#define MACH_TYPE_APX_SOM9G45_EK 2784 +#define MACH_TYPE_SONGSHAN 2785 +#define MACH_TYPE_TIANSHAN 2786 +#define MACH_TYPE_VPX500 2787 +#define MACH_TYPE_AM3517SAM 2788 +#define MACH_TYPE_SKAT91_SIM508 2789 +#define MACH_TYPE_SKAT91_S3E 2790 +#define MACH_TYPE_OMAP4_PANDA 2791 +#define MACH_TYPE_DF7220 2792 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -18343,9 +18417,9 @@ extern unsigned int __machine_arch_type; # else # define machine_arch_type MACH_TYPE_HYNET_INE # endif -# define machine_is_hynet_ine() (machine_arch_type == MACH_TYPE_HYNET_INE) +# define machine_is_argonst_foundation() (machine_arch_type == MACH_TYPE_HYNET_INE) #else -# define machine_is_hynet_ine() (0) +# define machine_is_argonst_foundation() (0) #endif #ifdef CONFIG_MACH_HYNET_APP @@ -30211,9 +30285,9 @@ extern unsigned int __machine_arch_type; # else # define machine_arch_type MACH_TYPE_OREO # endif -# define machine_is_oreo() (machine_arch_type == MACH_TYPE_OREO) +# define machine_is_oreo_camera() (machine_arch_type == MACH_TYPE_OREO) #else -# define machine_is_oreo() (0) +# define machine_is_oreo_camera() (0) #endif #ifdef CONFIG_MACH_SMDK6442 @@ -34464,14 +34538,14 @@ extern unsigned int __machine_arch_type; # define machine_is_sheeva_esata() (0) #endif -#ifdef CONFIG_MACH_SURF7X30 +#ifdef CONFIG_MACH_MSM7X30_SURF # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_SURF7X30 +# define machine_arch_type MACH_TYPE_MSM7X30_SURF # endif -# define machine_is_msm7x30_surf() (machine_arch_type == MACH_TYPE_SURF7X30) +# define machine_is_msm7x30_surf() (machine_arch_type == MACH_TYPE_MSM7X30_SURF) #else # define machine_is_msm7x30_surf() (0) #endif @@ -34872,14 +34946,14 @@ extern unsigned int __machine_arch_type; # define machine_is_qsd8x50a_ffa() (0) #endif -#ifdef CONFIG_MACH_XGCP10 +#ifdef CONFIG_MACH_ADX_XGCP10 # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_XGCP10 +# define machine_arch_type MACH_TYPE_ADX_XGCP10 # endif -# define machine_is_adx_xgcp10() (machine_arch_type == MACH_TYPE_XGCP10) +# define machine_is_adx_xgcp10() (machine_arch_type == MACH_TYPE_ADX_XGCP10) #else # define machine_is_adx_xgcp10() (0) #endif @@ -34944,6 +35018,894 @@ extern unsigned int __machine_arch_type; # define machine_is_axell_h40_h50_ctrl() (0) #endif +#ifdef CONFIG_MACH_DTCOMMOD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DTCOMMOD +# endif +# define machine_is_dtcommod() (machine_arch_type == MACH_TYPE_DTCOMMOD) +#else +# define machine_is_dtcommod() (0) +#endif + +#ifdef CONFIG_MACH_GOULD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GOULD +# endif +# define machine_is_gould() (machine_arch_type == MACH_TYPE_GOULD) +#else +# define machine_is_gould() (0) +#endif + +#ifdef CONFIG_MACH_SIBERIA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SIBERIA +# endif +# define machine_is_siberia() (machine_arch_type == MACH_TYPE_SIBERIA) +#else +# define machine_is_siberia() (0) +#endif + +#ifdef CONFIG_MACH_SBC3530 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SBC3530 +# endif +# define machine_is_sbc3530() (machine_arch_type == MACH_TYPE_SBC3530) +#else +# define machine_is_sbc3530() (0) +#endif + +#ifdef CONFIG_MACH_QARM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_QARM +# endif +# define machine_is_qarm() (machine_arch_type == MACH_TYPE_QARM) +#else +# define machine_is_qarm() (0) +#endif + +#ifdef CONFIG_MACH_MIPS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MIPS +# endif +# define machine_is_mips() (machine_arch_type == MACH_TYPE_MIPS) +#else +# define machine_is_mips() (0) +#endif + +#ifdef CONFIG_MACH_MX27GRB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX27GRB +# endif +# define machine_is_mx27grb() (machine_arch_type == MACH_TYPE_MX27GRB) +#else +# define machine_is_mx27grb() (0) +#endif + +#ifdef CONFIG_MACH_SBC8100 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SBC8100 +# endif +# define machine_is_sbc8100() (machine_arch_type == MACH_TYPE_SBC8100) +#else +# define machine_is_sbc8100() (0) +#endif + +#ifdef CONFIG_MACH_SAARB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SAARB +# endif +# define machine_is_saarb() (machine_arch_type == MACH_TYPE_SAARB) +#else +# define machine_is_saarb() (0) +#endif + +#ifdef CONFIG_MACH_OMAP3MINI +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP3MINI +# endif +# define machine_is_omap3mini() (machine_arch_type == MACH_TYPE_OMAP3MINI) +#else +# define machine_is_omap3mini() (0) +#endif + +#ifdef CONFIG_MACH_CNMBOOK7SE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CNMBOOK7SE +# endif +# define machine_is_cnmbook7se() (machine_arch_type == MACH_TYPE_CNMBOOK7SE) +#else +# define machine_is_cnmbook7se() (0) +#endif + +#ifdef CONFIG_MACH_CATAN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CATAN +# endif +# define machine_is_catan() (machine_arch_type == MACH_TYPE_CATAN) +#else +# define machine_is_catan() (0) +#endif + +#ifdef CONFIG_MACH_HARMONY +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HARMONY +# endif +# define machine_is_harmony() (machine_arch_type == MACH_TYPE_HARMONY) +#else +# define machine_is_harmony() (0) +#endif + +#ifdef CONFIG_MACH_TONGA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TONGA +# endif +# define machine_is_tonga() (machine_arch_type == MACH_TYPE_TONGA) +#else +# define machine_is_tonga() (0) +#endif + +#ifdef CONFIG_MACH_CYBOOK_ORIZON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CYBOOK_ORIZON +# endif +# define machine_is_cybook_orizon() (machine_arch_type == MACH_TYPE_CYBOOK_ORIZON) +#else +# define machine_is_cybook_orizon() (0) +#endif + +#ifdef CONFIG_MACH_HTCRHODIUMCDMA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HTCRHODIUMCDMA +# endif +# define machine_is_htcrhodiumcdma() (machine_arch_type == MACH_TYPE_HTCRHODIUMCDMA) +#else +# define machine_is_htcrhodiumcdma() (0) +#endif + +#ifdef CONFIG_MACH_EPC_G45 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EPC_G45 +# endif +# define machine_is_epc_g45() (machine_arch_type == MACH_TYPE_EPC_G45) +#else +# define machine_is_epc_g45() (0) +#endif + +#ifdef CONFIG_MACH_EPC_LPC3250 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EPC_LPC3250 +# endif +# define machine_is_epc_lpc3250() (machine_arch_type == MACH_TYPE_EPC_LPC3250) +#else +# define machine_is_epc_lpc3250() (0) +#endif + +#ifdef CONFIG_MACH_MXC91341EVB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MXC91341EVB +# endif +# define machine_is_mxc91341evb() (machine_arch_type == MACH_TYPE_MXC91341EVB) +#else +# define machine_is_mxc91341evb() (0) +#endif + +#ifdef CONFIG_MACH_RTW1000 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_RTW1000 +# endif +# define machine_is_rtw1000() (machine_arch_type == MACH_TYPE_RTW1000) +#else +# define machine_is_rtw1000() (0) +#endif + +#ifdef CONFIG_MACH_BOBCAT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BOBCAT +# endif +# define machine_is_bobcat() (machine_arch_type == MACH_TYPE_BOBCAT) +#else +# define machine_is_bobcat() (0) +#endif + +#ifdef CONFIG_MACH_TRIZEPS6 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TRIZEPS6 +# endif +# define machine_is_trizeps6() (machine_arch_type == MACH_TYPE_TRIZEPS6) +#else +# define machine_is_trizeps6() (0) +#endif + +#ifdef CONFIG_MACH_MSM7X30_FLUID +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM7X30_FLUID +# endif +# define machine_is_msm7x30_fluid() (machine_arch_type == MACH_TYPE_MSM7X30_FLUID) +#else +# define machine_is_msm7x30_fluid() (0) +#endif + +#ifdef CONFIG_MACH_NEDAP9263 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NEDAP9263 +# endif +# define machine_is_nedap9263() (machine_arch_type == MACH_TYPE_NEDAP9263) +#else +# define machine_is_nedap9263() (0) +#endif + +#ifdef CONFIG_MACH_NETGEAR_MS2110 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NETGEAR_MS2110 +# endif +# define machine_is_netgear_ms2110() (machine_arch_type == MACH_TYPE_NETGEAR_MS2110) +#else +# define machine_is_netgear_ms2110() (0) +#endif + +#ifdef CONFIG_MACH_BMX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BMX +# endif +# define machine_is_bmx() (machine_arch_type == MACH_TYPE_BMX) +#else +# define machine_is_bmx() (0) +#endif + +#ifdef CONFIG_MACH_NETSTREAM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NETSTREAM +# endif +# define machine_is_netstream() (machine_arch_type == MACH_TYPE_NETSTREAM) +#else +# define machine_is_netstream() (0) +#endif + +#ifdef CONFIG_MACH_VPNEXT_RCU +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VPNEXT_RCU +# endif +# define machine_is_vpnext_rcu() (machine_arch_type == MACH_TYPE_VPNEXT_RCU) +#else +# define machine_is_vpnext_rcu() (0) +#endif + +#ifdef CONFIG_MACH_VPNEXT_MPU +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VPNEXT_MPU +# endif +# define machine_is_vpnext_mpu() (machine_arch_type == MACH_TYPE_VPNEXT_MPU) +#else +# define machine_is_vpnext_mpu() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_TABLET_V1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_TABLET_V1 +# endif +# define machine_is_bcmring_tablet_v1() (machine_arch_type == MACH_TYPE_BCMRING_TABLET_V1) +#else +# define machine_is_bcmring_tablet_v1() (0) +#endif + +#ifdef CONFIG_MACH_SGARM10 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SGARM10 +# endif +# define machine_is_sgarm10() (machine_arch_type == MACH_TYPE_SGARM10) +#else +# define machine_is_sgarm10() (0) +#endif + +#ifdef CONFIG_MACH_CM_T3517 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CM_T3517 +# endif +# define machine_is_cm_t3517() (machine_arch_type == MACH_TYPE_CM_T3517) +#else +# define machine_is_cm_t3517() (0) +#endif + +#ifdef CONFIG_MACH_OMAP3_CPS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP3_CPS +# endif +# define machine_is_omap3_cps() (machine_arch_type == MACH_TYPE_OMAP3_CPS) +#else +# define machine_is_omap3_cps() (0) +#endif + +#ifdef CONFIG_MACH_AXAR1500_RECEIVER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AXAR1500_RECEIVER +# endif +# define machine_is_axar1500_receiver() (machine_arch_type == MACH_TYPE_AXAR1500_RECEIVER) +#else +# define machine_is_axar1500_receiver() (0) +#endif + +#ifdef CONFIG_MACH_WBD222 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_WBD222 +# endif +# define machine_is_wbd222() (machine_arch_type == MACH_TYPE_WBD222) +#else +# define machine_is_wbd222() (0) +#endif + +#ifdef CONFIG_MACH_MT65XX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MT65XX +# endif +# define machine_is_mt65xx() (machine_arch_type == MACH_TYPE_MT65XX) +#else +# define machine_is_mt65xx() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X60_SURF +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X60_SURF +# endif +# define machine_is_msm8x60_surf() (machine_arch_type == MACH_TYPE_MSM8X60_SURF) +#else +# define machine_is_msm8x60_surf() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X60_SIM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X60_SIM +# endif +# define machine_is_msm8x60_sim() (machine_arch_type == MACH_TYPE_MSM8X60_SIM) +#else +# define machine_is_msm8x60_sim() (0) +#endif + +#ifdef CONFIG_MACH_VMC300 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VMC300 +# endif +# define machine_is_vmc300() (machine_arch_type == MACH_TYPE_VMC300) +#else +# define machine_is_vmc300() (0) +#endif + +#ifdef CONFIG_MACH_TCC8000_SDK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TCC8000_SDK +# endif +# define machine_is_tcc8000_sdk() (machine_arch_type == MACH_TYPE_TCC8000_SDK) +#else +# define machine_is_tcc8000_sdk() (0) +#endif + +#ifdef CONFIG_MACH_NANOS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NANOS +# endif +# define machine_is_nanos() (machine_arch_type == MACH_TYPE_NANOS) +#else +# define machine_is_nanos() (0) +#endif + +#ifdef CONFIG_MACH_STAMP9G10 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_STAMP9G10 +# endif +# define machine_is_stamp9g10() (machine_arch_type == MACH_TYPE_STAMP9G10) +#else +# define machine_is_stamp9g10() (0) +#endif + +#ifdef CONFIG_MACH_STAMP9G45 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_STAMP9G45 +# endif +# define machine_is_stamp9g45() (machine_arch_type == MACH_TYPE_STAMP9G45) +#else +# define machine_is_stamp9g45() (0) +#endif + +#ifdef CONFIG_MACH_H6053 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_H6053 +# endif +# define machine_is_h6053() (machine_arch_type == MACH_TYPE_H6053) +#else +# define machine_is_h6053() (0) +#endif + +#ifdef CONFIG_MACH_SMINT01 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMINT01 +# endif +# define machine_is_smint01() (machine_arch_type == MACH_TYPE_SMINT01) +#else +# define machine_is_smint01() (0) +#endif + +#ifdef CONFIG_MACH_PRTLVT2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PRTLVT2 +# endif +# define machine_is_prtlvt2() (machine_arch_type == MACH_TYPE_PRTLVT2) +#else +# define machine_is_prtlvt2() (0) +#endif + +#ifdef CONFIG_MACH_AP420 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AP420 +# endif +# define machine_is_ap420() (machine_arch_type == MACH_TYPE_AP420) +#else +# define machine_is_ap420() (0) +#endif + +#ifdef CONFIG_MACH_HTCSHIFT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HTCSHIFT +# endif +# define machine_is_htcclio() (machine_arch_type == MACH_TYPE_HTCSHIFT) +#else +# define machine_is_htcclio() (0) +#endif + +#ifdef CONFIG_MACH_DAVINCI_DM365_FC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DAVINCI_DM365_FC +# endif +# define machine_is_davinci_dm365_fc() (machine_arch_type == MACH_TYPE_DAVINCI_DM365_FC) +#else +# define machine_is_davinci_dm365_fc() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X55_SURF +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X55_SURF +# endif +# define machine_is_msm8x55_surf() (machine_arch_type == MACH_TYPE_MSM8X55_SURF) +#else +# define machine_is_msm8x55_surf() (0) +#endif + +#ifdef CONFIG_MACH_MSM8X55_FFA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MSM8X55_FFA +# endif +# define machine_is_msm8x55_ffa() (machine_arch_type == MACH_TYPE_MSM8X55_FFA) +#else +# define machine_is_msm8x55_ffa() (0) +#endif + +#ifdef CONFIG_MACH_ESL_VAMANA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ESL_VAMANA +# endif +# define machine_is_esl_vamana() (machine_arch_type == MACH_TYPE_ESL_VAMANA) +#else +# define machine_is_esl_vamana() (0) +#endif + +#ifdef CONFIG_MACH_SBC35 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SBC35 +# endif +# define machine_is_sbc35() (machine_arch_type == MACH_TYPE_SBC35) +#else +# define machine_is_sbc35() (0) +#endif + +#ifdef CONFIG_MACH_MPX6446 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MPX6446 +# endif +# define machine_is_mpx6446() (machine_arch_type == MACH_TYPE_MPX6446) +#else +# define machine_is_mpx6446() (0) +#endif + +#ifdef CONFIG_MACH_OREO_CONTROLLER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OREO_CONTROLLER +# endif +# define machine_is_oreo_controller() (machine_arch_type == MACH_TYPE_OREO_CONTROLLER) +#else +# define machine_is_oreo_controller() (0) +#endif + +#ifdef CONFIG_MACH_KOPIN_MODELS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KOPIN_MODELS +# endif +# define machine_is_kopin_models() (machine_arch_type == MACH_TYPE_KOPIN_MODELS) +#else +# define machine_is_kopin_models() (0) +#endif + +#ifdef CONFIG_MACH_TTC_VISION2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TTC_VISION2 +# endif +# define machine_is_ttc_vision2() (machine_arch_type == MACH_TYPE_TTC_VISION2) +#else +# define machine_is_ttc_vision2() (0) +#endif + +#ifdef CONFIG_MACH_CNS3420VB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CNS3420VB +# endif +# define machine_is_cns3420vb() (machine_arch_type == MACH_TYPE_CNS3420VB) +#else +# define machine_is_cns3420vb() (0) +#endif + +#ifdef CONFIG_MACH_LPC2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LPC2 +# endif +# define machine_is_lpc2() (machine_arch_type == MACH_TYPE_LPC2) +#else +# define machine_is_lpc2() (0) +#endif + +#ifdef CONFIG_MACH_OLYMPUS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OLYMPUS +# endif +# define machine_is_olympus() (machine_arch_type == MACH_TYPE_OLYMPUS) +#else +# define machine_is_olympus() (0) +#endif + +#ifdef CONFIG_MACH_VORTEX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VORTEX +# endif +# define machine_is_vortex() (machine_arch_type == MACH_TYPE_VORTEX) +#else +# define machine_is_vortex() (0) +#endif + +#ifdef CONFIG_MACH_S5PC200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_S5PC200 +# endif +# define machine_is_s5pc200() (machine_arch_type == MACH_TYPE_S5PC200) +#else +# define machine_is_s5pc200() (0) +#endif + +#ifdef CONFIG_MACH_ECUCORE_9263 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ECUCORE_9263 +# endif +# define machine_is_ecucore_9263() (machine_arch_type == MACH_TYPE_ECUCORE_9263) +#else +# define machine_is_ecucore_9263() (0) +#endif + +#ifdef CONFIG_MACH_SMDKC200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMDKC200 +# endif +# define machine_is_smdkc200() (machine_arch_type == MACH_TYPE_SMDKC200) +#else +# define machine_is_smdkc200() (0) +#endif + +#ifdef CONFIG_MACH_EMSISO_SX27 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EMSISO_SX27 +# endif +# define machine_is_emsiso_sx27() (machine_arch_type == MACH_TYPE_EMSISO_SX27) +#else +# define machine_is_emsiso_sx27() (0) +#endif + +#ifdef CONFIG_MACH_APX_SOM9G45_EK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_APX_SOM9G45_EK +# endif +# define machine_is_apx_som9g45_ek() (machine_arch_type == MACH_TYPE_APX_SOM9G45_EK) +#else +# define machine_is_apx_som9g45_ek() (0) +#endif + +#ifdef CONFIG_MACH_SONGSHAN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SONGSHAN +# endif +# define machine_is_songshan() (machine_arch_type == MACH_TYPE_SONGSHAN) +#else +# define machine_is_songshan() (0) +#endif + +#ifdef CONFIG_MACH_TIANSHAN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TIANSHAN +# endif +# define machine_is_tianshan() (machine_arch_type == MACH_TYPE_TIANSHAN) +#else +# define machine_is_tianshan() (0) +#endif + +#ifdef CONFIG_MACH_VPX500 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VPX500 +# endif +# define machine_is_vpx500() (machine_arch_type == MACH_TYPE_VPX500) +#else +# define machine_is_vpx500() (0) +#endif + +#ifdef CONFIG_MACH_AM3517SAM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AM3517SAM +# endif +# define machine_is_am3517sam() (machine_arch_type == MACH_TYPE_AM3517SAM) +#else +# define machine_is_am3517sam() (0) +#endif + +#ifdef CONFIG_MACH_SKAT91_SIM508 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SKAT91_SIM508 +# endif +# define machine_is_skat91_sim508() (machine_arch_type == MACH_TYPE_SKAT91_SIM508) +#else +# define machine_is_skat91_sim508() (0) +#endif + +#ifdef CONFIG_MACH_SKAT91_S3E +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SKAT91_S3E +# endif +# define machine_is_skat91_s3e() (machine_arch_type == MACH_TYPE_SKAT91_S3E) +#else +# define machine_is_skat91_s3e() (0) +#endif + +#ifdef CONFIG_MACH_OMAP4_PANDA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP4_PANDA +# endif +# define machine_is_omap4_panda() (machine_arch_type == MACH_TYPE_OMAP4_PANDA) +#else +# define machine_is_omap4_panda() (0) +#endif + +#ifdef CONFIG_MACH_DF7220 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DF7220 +# endif +# define machine_is_df7220() (machine_arch_type == MACH_TYPE_DF7220) +#else +# define machine_is_df7220() (0) +#endif + /* * These have not yet been registered */ diff --git a/board/Marvell/guruplug/Makefile b/board/Marvell/guruplug/Makefile new file mode 100644 index 0000000000..99748a7ea5 --- /dev/null +++ b/board/Marvell/guruplug/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Siddarth Gore <gores@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := guruplug.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/Marvell/guruplug/config.mk b/board/Marvell/guruplug/config.mk new file mode 100644 index 0000000000..caa26b6cfb --- /dev/null +++ b/board/Marvell/guruplug/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Siddarth Gore <gores@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +TEXT_BASE = 0x00600000 + +KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c new file mode 100644 index 0000000000..ba47ca179f --- /dev/null +++ b/board/Marvell/guruplug/guruplug.c @@ -0,0 +1,167 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include "guruplug.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + kw_config_gpio(GURUPLUG_OE_VAL_LOW, + GURUPLUG_OE_VAL_HIGH, + GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* GPIO_RST */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GE1_8, + MPP29_GE1_9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GE1_14, + MPP35_GE1_15, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_TDM_SPI_SCK, + MPP41_TDM_SPI_MISO, + MPP42_TDM_SPI_MOSI, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, /* M_RLED */ + MPP47_GPIO, /* M_GLED */ + MPP48_GPIO, /* B_RLED */ + MPP49_GPIO, /* B_GLED */ + 0 + }; + kirkwood_mpp_conf(kwmpp_config); + + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_GURUPLUG; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +int dram_init(void) +{ + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + gd->bd->bi_dram[i].start = kw_sdram_bar(i); + gd->bd->bi_dram[i].size = kw_sdram_bs(i); + } + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void mv_phy_88e1121_init(char *name) +{ + u16 reg; + u16 devadr; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..%s could not read PHY dev address\n", + __FUNCTION__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1121_MAC_CTRL2_REG, ®); + reg |= (MV88E1121_RGMII_RXTM_CTRL | MV88E1121_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1121_MAC_CTRL2_REG, reg); + miiphy_write(name, devadr, MV88E1121_PGADR_REG, 0); + + /* reset the phy */ + if (miiphy_read (name, devadr, PHY_BMCR, ®) != 0) { + printf("Err..(%s) PHY status read failed\n", __FUNCTION__); + return; + } + if (miiphy_write (name, devadr, PHY_BMCR, reg | 0x8000) != 0) { + printf("Err..(%s) PHY reset failed\n", __FUNCTION__); + return; + } + + printf("88E1121 Initialized on %s\n", name); +} + +void reset_phy(void) +{ + /* configure and initialize both PHY's */ + mv_phy_88e1121_init("egiga0"); + mv_phy_88e1121_init("egiga1"); +} +#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/Marvell/guruplug/guruplug.h b/board/Marvell/guruplug/guruplug.h new file mode 100644 index 0000000000..5bc16b4c8f --- /dev/null +++ b/board/Marvell/guruplug/guruplug.h @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __GURUPLUG_H +#define __GURUPLUG_H + +#define GURUPLUG_OE_LOW (~(0)) +#define GURUPLUG_OE_HIGH (~(0)) +#define GURUPLUG_OE_VAL_LOW 0 +#define GURUPLUG_OE_VAL_HIGH (0xf << 16) /* 4 LED Pins high */ + +/* PHY related */ +#define MV88E1121_MAC_CTRL2_REG 21 +#define MV88E1121_PGADR_REG 22 +#define MV88E1121_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1121_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __GURUPLUG_H */ diff --git a/board/Marvell/guruplug/kwbimage.cfg b/board/Marvell/guruplug/kwbimage.cfg new file mode 100644 index 0000000000..2afd927463 --- /dev/null +++ b/board/Marvell/guruplug/kwbimage.cfg @@ -0,0 +1,162 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Siddarth Gore <gores@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0/1 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b9b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000c30 # DDR Configuration register +# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x37543000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x000000cc # DDR Address Control +# bit1-0: 01, Cs0width=x8 +# bit3-2: 10, Cs0size=1Gb +# bit5-4: 01, Cs1width=x8 +# bit7-6: 10, Cs1size=1Gb +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000C52 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F17F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x0F, Size (i.e. 256MB) + +DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb +DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 + +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E803 # CPU ODT Control +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/board/davedenx/qong/lowlevel_init.S b/board/davedenx/qong/lowlevel_init.S index 198dd76b8a..80bed92329 100644 --- a/board/davedenx/qong/lowlevel_init.S +++ b/board/davedenx/qong/lowlevel_init.S @@ -42,6 +42,27 @@ bcs 1b .endm +.macro SETUP_RAM cfg, ctl + /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ + REG 0xB8001010, 0x00000004 + ldr r3, =\cfg + ldr r2, =WEIM_ESDCFG0 + str r3, [r2] + REG 0xB8001000, 0x92100000 + REG 0x80000f00, 0x12344321 + REG 0xB8001000, 0xa2100000 + REG 0x80000000, 0x12344321 + REG 0x80000000, 0x12344321 + REG 0xB8001000, 0xb2100000 + REG8 0x80000033, 0xda + REG8 0x81000000, 0xff + ldr r3, =\ctl + ldr r2, =WEIM_ESDCTL0 + str r3, [r2] + REG 0x80000000, 0xDEADBEEF + REG 0xB8001010, 0x0000000c + +.endm /* RedBoot: To support 133MHz DDR */ .macro init_drive_strength /* @@ -130,43 +151,86 @@ lowlevel_init: /* Default: 1, 4, 12, 1 */ REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) - /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */ - REG 0xB8001010, 0x00000004 - REG 0xB8001004, ((3 << 21) | /* tXP */ \ - (0 << 20) | /* tWTR */ \ - (2 << 18) | /* tRP */ \ - (1 << 16) | /* tMRD */ \ - (0 << 15) | /* tWR */ \ - (5 << 12) | /* tRAS */ \ - (1 << 10) | /* tRRD */ \ - (3 << 8) | /* tCAS */ \ - (2 << 4) | /* tRCD */ \ - (7 << 0) /* tRC */ ) - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - REG 0xB8001000, ((1 << 31) | \ - (0 << 28) | \ - (0 << 27) | \ - (3 << 24) | /* 14 rows */ \ - (2 << 20) | /* 10 cols */ \ - (2 << 16) | \ - (4 << 13) | /* 3.91us (64ms/16384) */ \ - (0 << 10) | \ - (0 << 8) | \ - (1 << 7) | \ - (0 << 0)) - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c +check_ddr_module: +/* Set stackpointer in internal RAM to call get_ram_size */ + ldr sp, =(IRAM_BASE_ADDR + IRAM_SIZE - 16) + stmfd sp!, {r0-r11, ip, lr} + mov ip, lr /* save link reg across call */ + + ldr r0,=0x08000000 + SETUP_RAM ESDCFG0_256MB, ESDCTL0_256MB + ldr r0,=0x80000000 + ldr r1,=0x10000000 + bl get_ram_size + ldr r1,=0x10000000 + cmp r0,r1 + beq restore_regs + SETUP_RAM ESDCFG0_128MB, ESDCTL0_128MB + ldr r0,=0x80000000 + ldr r1,=0x08000000 + bl get_ram_size + ldr r1,=0x08000000 + cmp r0,r1 + beq restore_regs + +restore_regs: + ldmfd sp!, {r0-r11, ip, lr} + mov lr, ip /* restore link reg */ mov pc, lr + MPCTL_PARAM_399: .word (((1 - 1) << 26) + ((52 - 1) << 16) + (7 << 10) + (35 << 0)) UPCTL_PARAM_240: .word (((2 - 1) << 26) + ((13 - 1) << 16) + (9 << 10) + (3 << 0)) + + .equ ESDCFG0_128MB, \ + (0 << 21) + /* tXP */ \ + (1 << 20) + /* tWTR */ \ + (2 << 18) + /* tRP */ \ + (1 << 16) + /* tMRD */ \ + (0 << 15) + /* tWR */ \ + (5 << 12) + /* tRAS */ \ + (1 << 10) + /* tRRD */ \ + (3 << 8) + /* tCAS */ \ + (2 << 4) + /* tRCD */ \ + (0x0F << 0) /* tRC */ + + .equ ESDCTL0_128MB, \ + (1 << 31) + /* enable */ \ + (0 << 28) + /* mode */ \ + (0 << 27) + /* supervisor protect */ \ + (2 << 24) + /* 13 rows */ \ + (2 << 20) + /* 10 cols */ \ + (2 << 16) + /* 32 bit */ \ + (3 << 13) + /* 7.81us (64ms/8192) */ \ + (0 << 10) + /* power down timer */ \ + (0 << 8) + /* full page */ \ + (1 << 7) + /* burst length */ \ + (0 << 0) /* precharge timer */ + + .equ ESDCFG0_256MB, \ + (3 << 21) + /* tXP */ \ + (0 << 20) + /* tWTR */ \ + (2 << 18) + /* tRP */ \ + (1 << 16) + /* tMRD */ \ + (0 << 15) + /* tWR */ \ + (5 << 12) + /* tRAS */ \ + (1 << 10) + /* tRRD */ \ + (3 << 8) + /* tCAS */ \ + (2 << 4) + /* tRCD */ \ + (7 << 0) /* tRC */ + + .equ ESDCTL0_256MB, \ + (1 << 31) + \ + (0 << 28) + \ + (0 << 27) + \ + (3 << 24) + /* 14 rows */ \ + (2 << 20) + /* 10 cols */ \ + (2 << 16) + \ + (4 << 13) + /* 3.91us (64ms/16384) */ \ + (0 << 10) + \ + (0 << 8) + \ + (1 << 7) + \ + (0 << 0) diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index b801150036..eb9218ec50 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -25,6 +25,7 @@ #include <netdev.h> #include <asm/arch/mx31.h> #include <asm/arch/mx31-regs.h> +#include <nand.h> #include "qong_fpga.h" DECLARE_GLOBAL_DATA_PTR; @@ -38,6 +39,15 @@ int dram_init (void) return 0; } +static void qong_fpga_reset(void) +{ + mx31_gpio_set(QONG_FPGA_RST_PIN, 0); + udelay(30); + mx31_gpio_set(QONG_FPGA_RST_PIN, 1); + + udelay(300); +} + int board_init (void) { /* Chip selects */ @@ -101,6 +111,15 @@ int board_init (void) mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO)); mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO)); mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO)); + + /* FPGA reset Pin */ + /* rstn = 0 */ + mx31_gpio_set(QONG_FPGA_RST_PIN, 0); + mx31_gpio_direction(QONG_FPGA_RST_PIN, MX31_GPIO_DIRECTION_OUT); + + /* set interrupt pin as input */ + mx31_gpio_direction(QONG_FPGA_IRQ_PIN, MX31_GPIO_DIRECTION_IN); + #endif /* setup pins for UART1 */ @@ -118,7 +137,7 @@ int board_init (void) int checkboard (void) { - printf("Board: DAVE/DENX QongEVB-LITE\n"); + printf("Board: DAVE/DENX Qong\n"); return 0; } @@ -127,32 +146,11 @@ int misc_init_r (void) #ifdef CONFIG_QONG_FPGA u32 tmp; - /* FPGA reset */ - /* rstn = 0 */ - tmp = __REG(GPIO2_BASE + GPIO_DR); - tmp &= (~(1 << QONG_FPGA_RST_PIN)); - __REG(GPIO2_BASE + GPIO_DR) = tmp; - /* set the GPIO as output */ - tmp = __REG(GPIO2_BASE + GPIO_GDIR); - tmp |= (1 << QONG_FPGA_RST_PIN); - __REG(GPIO2_BASE + GPIO_GDIR) = tmp; - /* wait */ - udelay(30); - /* rstn = 1 */ - tmp = __REG(GPIO2_BASE + GPIO_DR); - tmp |= (1 << QONG_FPGA_RST_PIN); - __REG(GPIO2_BASE + GPIO_DR) = tmp; - /* set interrupt pin as input */ - __REG(GPIO2_BASE + GPIO_GDIR) = tmp | (1 << QONG_FPGA_IRQ_PIN); - /* wait while the FPGA starts */ - udelay(300); - tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION; printf("FPGA: "); printf("version register = %u.%u.%u\n", (tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF); #endif - return 0; } @@ -164,3 +162,56 @@ int board_eth_init(bd_t *bis) return 0; #endif } + +#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT) +static void board_nand_setup(void) +{ + + /* CS3: NAND 8-bit */ + __REG(CSCR_U(3)) = 0x00004f00; + __REG(CSCR_L(3)) = 0x20013b31; + __REG(CSCR_A(3)) = 0x00020800; + __REG(IOMUXC_GPR) |= 1 << 13; + + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_RB, MUX_CTL_IN_GPIO)); + + /* Make sure to reset the fpga else you cannot access NAND */ + qong_fpga_reset(); + + /* Enable NAND flash */ + mx31_gpio_set(15, 1); + mx31_gpio_set(14, 1); + mx31_gpio_direction(15, MX31_GPIO_DIRECTION_OUT); + mx31_gpio_direction(16, MX31_GPIO_DIRECTION_IN); + mx31_gpio_direction(14, MX31_GPIO_DIRECTION_IN); + mx31_gpio_set(15, 0); + +} + +int qong_nand_rdy(void *chip) +{ + udelay(1); + return mx31_gpio_get(16); +} + +void qong_nand_select_chip(struct mtd_info *mtd, int chip) +{ + if (chip >= 0) + mx31_gpio_set(15, 0); + else + mx31_gpio_set(15, 1); + +} + +void qong_nand_plat_init(void *chip) +{ + struct nand_chip *nand = (struct nand_chip *)chip; + nand->chip_delay = 20; + nand->select_chip = qong_nand_select_chip; + nand->options &= ~NAND_BUSWIDTH_16; + board_nand_setup(); +} + +#endif diff --git a/board/davedenx/qong/qong_fpga.h b/board/davedenx/qong/qong_fpga.h index e8042b131e..4e11f5a1cf 100644 --- a/board/davedenx/qong/qong_fpga.h +++ b/board/davedenx/qong/qong_fpga.h @@ -33,8 +33,8 @@ #define QONG_FPGA_TMS_PIN 25 #define QONG_FPGA_TDI_PIN 8 #define QONG_FPGA_TDO_PIN 7 -#define QONG_FPGA_RST_PIN 16 -#define QONG_FPGA_IRQ_PIN 8 +#define QONG_FPGA_RST_PIN 48 +#define QONG_FPGA_IRQ_PIN 40 #endif #endif /* QONG_FPGA_H */ diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg index db09913f49..a875e8ff55 100644 --- a/board/freescale/mx51evk/imximage.cfg +++ b/board/freescale/mx51evk/imximage.cfg @@ -26,7 +26,7 @@ # The syntax is taken as close as possible with the kwbimage # Boot Device : one of -# spi_flash, nand, onenand, sd_card +# spi, sd (the board has no nand neither onenand) BOOT_FROM spi diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 8754563802..f0b7abcf52 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -72,72 +72,6 @@ static void setup_iomux_uart(void) mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); } -static void setup_expio(void) -{ - u32 reg; - struct weim *pweim = (struct weim *)WEIM_BASE_ADDR; - struct clkctl *pclkctl = (struct clkctl *)CCM_BASE_ADDR; - - /* CS5 setup */ - mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0); - writel(0x00410089, &pweim[5].csgcr1); - writel(0x00000002, &pweim[5].csgcr2); - - /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ - writel(0x32260000, &pweim[5].csrcr1); - - /* APR = 0 */ - writel(0x00000000, &pweim[5].csrcr2); - - /* - * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0, - * WCSA=0, WCSN=0 - */ - writel(0x72080F00, &pweim[5].cswcr1); - - mx51_io_board = (struct io_board_ctrl *)(CS5_BASE_ADDR + - IO_BOARD_OFFSET); - if ((readw(&mx51_io_board->id1) == 0xAAAA) && - (readw(&mx51_io_board->id2) == 0x5555)) { - if (is_soc_rev(CHIP_REV_2_0) < 0) { - reg = readl(&pclkctl->cbcdr); - reg = (reg & (~0x70000)) | 0x30000; - writel(reg, &pclkctl->cbcdr); - /* make sure divider effective */ - while (readl(&pclkctl->cdhipr) != 0) - ; - writel(0x0, &pclkctl->ccdr); - } - } else { - /* CS1 */ - writel(0x00410089, &pweim[1].csgcr1); - writel(0x00000002, &pweim[1].csgcr2); - /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */ - writel(0x32260000, &pweim[1].csrcr1); - /* APR=0 */ - writel(0x00000000, &pweim[1].csrcr2); - /* - * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, - * WEN=0, WCSA=0, WCSN=0 - */ - writel(0x72080F00, &pweim[1].cswcr1); - mx51_io_board = (struct io_board_ctrl *)(CS1_BASE_ADDR + - IO_BOARD_OFFSET); - } - - /* Reset interrupt status reg */ - writew(0x1F, &(mx51_io_board->int_rest)); - writew(0x00, &(mx51_io_board->int_rest)); - writew(0xFFFF, &(mx51_io_board->int_mask)); - - /* Reset the XUART and Ethernet controllers */ - reg = readw(&(mx51_io_board->sw_reset)); - reg |= 0x9; - writew(reg, &(mx51_io_board->sw_reset)); - reg &= ~0x9; - writew(reg, &(mx51_io_board->sw_reset)); -} - static void setup_iomux_fec(void) { /*FEC_MDIO*/ @@ -349,7 +283,6 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; setup_iomux_uart(); - setup_expio(); setup_iomux_fec(); return 0; } diff --git a/board/freescale/mx51evk/mx51evk.h b/board/freescale/mx51evk/mx51evk.h index 524cdcced4..2854e71e8d 100644 --- a/board/freescale/mx51evk/mx51evk.h +++ b/board/freescale/mx51evk/mx51evk.h @@ -47,5 +47,4 @@ struct io_board_ctrl { }; #endif -#define IO_BOARD_OFFSET (0x20000) #endif diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c index 63375d5da0..442741547b 100644 --- a/board/logicpd/imx27lite/imx27lite.c +++ b/board/logicpd/imx27lite/imx27lite.c @@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE; +#if defined(CONFIG_SYS_NAND_LARGEPAGE) + struct system_control_regs *sc_regs = + (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; +#endif gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -43,9 +47,20 @@ int board_init (void) ®s->port[PORTC].dr); #endif #ifdef CONFIG_MXC_MMC +#if defined(CONFIG_MAGNESIUM) + mx27_sd1_init_pins(); +#else mx27_sd2_init_pins(); #endif +#endif +#if defined(CONFIG_SYS_NAND_LARGEPAGE) + /* + * set in FMCR NF_FMS Bit(5) to 1 + * (NAND Flash with 2 Kbyte page size) + */ + writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr); +#endif return 0; } @@ -68,6 +83,7 @@ int dram_init (void) int checkboard(void) { - printf("LogicPD imx27lite\n"); + puts ("Board: "); + puts(CONFIG_BOARDNAME); return 0; } diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c index 396c3e7340..ff21ce667b 100644 --- a/board/ronetix/pm9261/led.c +++ b/board/ronetix/pm9261/led.c @@ -26,19 +26,21 @@ #include <common.h> #include <asm/arch/at91sam9261.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/io.h> void coloured_LED_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); + writel(1 << AT91SAM9261_ID_PIOC, &pmc->pcer); - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); + at91_set_pio_output(CONFIG_RED_LED, 1); + at91_set_pio_output(CONFIG_GREEN_LED, 1); + at91_set_pio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(CONFIG_RED_LED, 0); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 0); + at91_set_pio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_YELLOW_LED, 1); } diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index 8662339581..53d8c48281 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -27,13 +27,14 @@ #include <common.h> #include <asm/sizes.h> #include <asm/arch/at91sam9261.h> -#include <asm/arch/at91sam9261_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> #include <lcd.h> @@ -55,39 +56,48 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9261_nand_hw_init(void) { unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->csa); /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(2)); + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); + + writel(1 << AT91SAM9261_ID_PIOA | + 1 << AT91SAM9261_ID_PIOC, + &pmc->pcer); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PA16, 1); + at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); - at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* NANDOE */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* NANDWE */ } #endif @@ -95,23 +105,30 @@ static void pm9261_nand_hw_init(void) #ifdef CONFIG_DRIVER_DM9000 static void pm9261_dm9000_hw_init(void) { + at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Configure SMC CS2 for DM9000 */ - at91_sys_write(AT91_SMC_SETUP(2), - AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(2), - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | - AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); - at91_sys_write(AT91_SMC_CYCLE(2), - AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); - at91_sys_write(AT91_SMC_MODE(2), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | - AT91_SMC_TDF_(1)); + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[2].setup); + + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8), + &smc->cs[2].pulse); + + writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16), + &smc->cs[2].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 | + AT91_SMC_MODE_TDF_CYCLE(1), + &smc->cs[2].mode); /* Configure Interrupt pin as input, no pull-up */ - at91_set_gpio_input(AT91_PIN_PA24, 0); + writel(1 << AT91SAM9261_ID_PIOA, &pmc->pcer); + at91_set_pio_input(AT91_PIO_PORTA, 24, 0); } #endif @@ -135,40 +152,42 @@ vidinfo_t panel_info = { void lcd_enable(void) { - at91_set_gpio_value(AT91_PIN_PA22, 0); /* power up */ + at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power up */ } void lcd_disable(void) { - at91_set_gpio_value(AT91_PIN_PA22, 1); /* power down */ + at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power down */ } static void pm9261_lcd_hw_init(void) { - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ - at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ - at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ - at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ - at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ - - at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* LCDDEN */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* LCDCC */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTB, 19, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTB, 20, 0); /* LCDD15 */ + at91_set_b_periph(AT91_PIO_PORTB, 23, 0); /* LCDD18 */ + at91_set_b_periph(AT91_PIO_PORTB, 24, 0); /* LCDD19 */ + at91_set_b_periph(AT91_PIO_PORTB, 25, 0); /* LCDD20 */ + at91_set_b_periph(AT91_PIO_PORTB, 26, 0); /* LCDD21 */ + at91_set_b_periph(AT91_PIO_PORTB, 27, 0); /* LCDD22 */ + at91_set_b_periph(AT91_PIO_PORTB, 28, 0); /* LCDD23 */ + + writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */ gd->fb_base = AT91SAM9261_SRAM_BASE; } @@ -222,11 +241,14 @@ void lcd_show_board_info(void) int board_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable Ctrlc */ console_init_f(); - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); + writel(1 << AT91SAM9261_ID_PIOA | + 1 << AT91SAM9261_ID_PIOC, + &pmc->pcer); /* arch number of PM9261-Board */ gd->bd->bi_arch_number = MACH_TYPE_PM9261; diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c index fe1a1d2001..4e585a4751 100644 --- a/board/ronetix/pm9263/led.c +++ b/board/ronetix/pm9263/led.c @@ -26,18 +26,19 @@ #include <common.h> #include <asm/arch/at91sam9263.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/io.h> void coloured_LED_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | - 1 << AT91SAM9263_ID_PIOCDE); + writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer); - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_pio_output(CONFIG_RED_LED, 1); + at91_set_pio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_RED_LED, 0); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 0); + at91_set_pio_value(CONFIG_GREEN_LED, 1); } diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 23ea154b43..c7835de3d0 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -27,13 +27,13 @@ #include <common.h> #include <asm/sizes.h> #include <asm/arch/at91sam9263.h> -#include <asm/arch/at91sam9263_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/gpio.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> #include <lcd.h> @@ -55,52 +55,59 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9263_nand_hw_init(void) { unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, - csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->csa[0]); /* Configure SMC CS3 for NAND/SmartMedia */ - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), + &smc->cs[3].setup); + + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_DBW_16 | + AT91_SMC_MODE_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_DBW_8 | + AT91_SMC_MODE_DBW_8 | #endif - AT91_SMC_TDF_(2)); + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif #ifdef CONFIG_MACB static void pm9263_macb_hw_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE; + /* * PB27 enables the 50MHz oscillator for Ethernet PHY * 1 - enable * 0 - disable */ - at91_set_gpio_output(AT91_PIN_PB27, 1); - at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */ + at91_set_pio_output(AT91_PIO_PORTB, 27, 1); + at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); /* * Disable pull-up on: @@ -110,19 +117,15 @@ static void pm9263_macb_hw_init(void) * * PHY has internal pull-down */ - writel(pin_to_mask(AT91_PIN_PC25), - pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); - writel(pin_to_mask(AT91_PIN_PE25) | - pin_to_mask(AT91_PIN_PE26), - pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0); + at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0); + at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0); /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PC25), - pin_to_controller(AT91_PIN_PC0) + PIO_PUER); - writel(pin_to_mask(AT91_PIN_PE25) | - pin_to_mask(AT91_PIN_PE26), - pin_to_controller(AT91_PIN_PE0) + PIO_PUER); + at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1); + at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1); + at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1); at91_macb_hw_init(); } @@ -148,17 +151,17 @@ vidinfo_t panel_info = { void lcd_enable(void) { - at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */ + at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power up */ } void lcd_disable(void) { - at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ + at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ } #ifdef CONFIG_LCD_IN_PSRAM -#define PSRAM_CRE_PIN AT91_PIN_PB29 +#define PSRAM_CRE_PIN AT91_PIO_PORTB, 29 #define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2) /* Initialize the PSRAM memory */ @@ -166,31 +169,34 @@ static int pm9263_lcd_hw_psram_init(void) { volatile uint16_t x; unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; /* Enable CS3 3.3v, no pull-ups */ - csa = at91_sys_read(AT91_MATRIX_EBI1CSA); - at91_sys_write(AT91_MATRIX_EBI1CSA, - csa | AT91_MATRIX_EBI1_DBPUC | - AT91_MATRIX_EBI1_VDDIOMSEL_3_3V); + csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC | + AT91_MATRIX_CSA_VDDIOMSEL_3_3V; + + writel(csa, &matrix->csa[1]); /* Configure SMC1 CS0 for PSRAM - 16-bit */ - at91_sys_write(AT91_SMC1_SETUP(0), - AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC1_PULSE(0), - AT91_SMC_NWEPULSE_(7) | AT91_SMC_NCS_WRPULSE_(7) | - AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(7)); - at91_sys_write(AT91_SMC1_CYCLE(0), - AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); - at91_sys_write(AT91_SMC1_MODE(0), - AT91_SMC_DBW_16 | - AT91_SMC_PMEN | - AT91_SMC_PS_32); + writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[0].setup); + + writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) | + AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(7), + &smc->cs[0].pulse); + + writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8), + &smc->cs[0].cycle); + + writel(AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_PMEN | AT91_SMC_MODE_PS_32, + &smc->cs[0].mode); /* setup PB29 as output */ - at91_set_gpio_output(PSRAM_CRE_PIN, 1); + at91_set_pio_output(PSRAM_CRE_PIN, 1); - at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ + at91_set_pio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ /* PSRAM: write BCR */ x = readw(PSRAM_CTRL_REG); @@ -216,7 +222,7 @@ static int pm9263_lcd_hw_psram_init(void) /* test if the chip is MT45W2M16B */ if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) { /* try with CRE=1 (MT45W2M16A) */ - at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ + at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ /* write RCR of the PSRAM */ x = readw(PSRAM_CTRL_REG); @@ -229,17 +235,14 @@ static int pm9263_lcd_hw_psram_init(void) writew(0x1234, PHYS_PSRAM); writew(0x5678, PHYS_PSRAM+2); if ((readw(PHYS_PSRAM) != 0x1234) - || (readw(PHYS_PSRAM + 2) != 0x5678)) + || (readw(PHYS_PSRAM + 2) != 0x5678)) return 1; } /* Bus matrix */ - at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR ); - at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY | - (AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) | - AT91_MATRIX_DEFMSTR_TYPE_FIXED | - (AT91_MATRIX_SLOT_CYCLE & (0xFF << 0))); + writel(AT91_MATRIX_PRA_M5(3), &matrix->pr[5].a); + writel(CONFIG_PSRAM_SCFG, &matrix->scfg[5]); return 0; } @@ -247,35 +250,37 @@ static int pm9263_lcd_hw_psram_init(void) static void pm9263_lcd_hw_init(void) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ + at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ + at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ + at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ + + writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer); /* Power Control */ - at91_set_gpio_output(AT91_PIN_PA22, 1); - at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */ + at91_set_pio_output(AT91_PIO_PORTA, 22, 1); + at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ #ifdef CONFIG_LCD_IN_PSRAM /* initialize te PSRAM */ @@ -337,13 +342,15 @@ void lcd_show_board_info(void) int board_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable Ctrlc */ console_init_f(); - at91_sys_write(AT91_PMC_PCER, - (1 << AT91SAM9263_ID_PIOA) | - (1 << AT91SAM9263_ID_PIOCDE) | - (1 << AT91SAM9263_ID_PIOB)); + writel((1 << AT91SAM9263_ID_PIOA) | + (1 << AT91SAM9263_ID_PIOCDE) | + (1 << AT91SAM9263_ID_PIOB), + &pmc->pcer); /* arch number of AT91SAM9263EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_PM9263; @@ -394,7 +401,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01); + rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); #endif return rc; } diff --git a/common/serial.c b/common/serial.c index 754e329922..0682faa9d1 100644 --- a/common/serial.c +++ b/common/serial.c @@ -79,13 +79,13 @@ struct serial_device *__default_serial_console (void) #endif #elif defined(CONFIG_S5PC1XX) #if defined(CONFIG_SERIAL0) - return &s5pc1xx_serial0_device; + return &s5p_serial0_device; #elif defined(CONFIG_SERIAL1) - return &s5pc1xx_serial1_device; + return &s5p_serial1_device; #elif defined(CONFIG_SERIAL2) - return &s5pc1xx_serial2_device; + return &s5p_serial2_device; #elif defined(CONFIG_SERIAL3) - return &s5pc1xx_serial3_device; + return &s5p_serial3_device; #else #error "CONFIG_SERIAL? missing." #endif @@ -162,10 +162,10 @@ void serial_initialize (void) serial_register(&s3c24xx_serial2_device); #endif #if defined(CONFIG_S5PC1XX) - serial_register(&s5pc1xx_serial0_device); - serial_register(&s5pc1xx_serial1_device); - serial_register(&s5pc1xx_serial2_device); - serial_register(&s5pc1xx_serial3_device); + serial_register(&s5p_serial0_device); + serial_register(&s5p_serial1_device); + serial_register(&s5p_serial2_device); + serial_register(&s5p_serial3_device); #endif #if defined(CONFIG_MPC512X) #if defined(CONFIG_SYS_PSC1) diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index d9660820bd..528ca2e99a 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -29,6 +29,7 @@ COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o COBJS-$(CONFIG_PCA953X) += pca953x.o +COBJS-$(CONFIG_S5PC1XX) += s5p_gpio.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mx31_gpio.c index 737aafa822..b07f038156 100644 --- a/drivers/gpio/mx31_gpio.c +++ b/drivers/gpio/mx31_gpio.c @@ -71,3 +71,18 @@ void mx31_gpio_set(unsigned int gpio, unsigned int value) l &= ~(1 << gpio); __REG(gpio_ports[port] + GPIO_DR) = l; } + +int mx31_gpio_get(unsigned int gpio) +{ + unsigned int port = gpio >> 5; + u32 l; + + if (port >= ARRAY_SIZE(gpio_ports)) + return -1; + + gpio &= 0x1f; + + l = (__REG(gpio_ports[port] + GPIO_DR) >> gpio) & 0x01; + + return l; +} diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c b/drivers/gpio/s5p_gpio.c index a97244bf30..0439477e46 100644 --- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -36,7 +36,7 @@ #define RATE_MASK(x) (0x1 << (x + 16)) #define RATE_SET(x) (0x1 << (x + 16)) -void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg) +void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) { unsigned int value; @@ -46,7 +46,7 @@ void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg) writel(value, &bank->con); } -void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en) +void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en) { unsigned int value; @@ -59,12 +59,12 @@ void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); } -void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio) +void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio) { gpio_cfg_pin(bank, gpio, GPIO_INPUT); } -void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en) +void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) { unsigned int value; @@ -75,7 +75,7 @@ void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); } -unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio) +unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio) { unsigned int value; @@ -83,7 +83,7 @@ unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio) return !!(value & DAT_MASK(gpio)); } -void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; @@ -102,7 +102,7 @@ void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) writel(value, &bank->pull); } -void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; @@ -123,7 +123,7 @@ void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) writel(value, &bank->drv); } -void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode) +void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index d2b4820b6f..c731bfb594 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -36,7 +36,7 @@ COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o -COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o +COBJS-$(CONFIG_S5PC1XX) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5p.c index 8da0c8606d..9747db3721 100644 --- a/drivers/serial/serial_s5pc1xx.c +++ b/drivers/serial/serial_s5p.c @@ -27,18 +27,18 @@ #include <asm/arch/clk.h> #include <serial.h> -static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index) +static inline struct s5p_uart *s5p_get_base_uart(int dev_index) { - u32 offset = dev_index * sizeof(struct s5pc1xx_uart); + u32 offset = dev_index * sizeof(struct s5p_uart); if (cpu_is_s5pc100()) - return (struct s5pc1xx_uart *)(S5PC100_UART_BASE + offset); + return (struct s5p_uart *)(S5PC100_UART_BASE + offset); else - return (struct s5pc1xx_uart *)(S5PC110_UART_BASE + offset); + return (struct s5p_uart *)(S5PC110_UART_BASE + offset); } /* - * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is + * The coefficient, used to calculate the baudrate on S5P UARTs is * calculated as * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1, @@ -66,7 +66,7 @@ static const int udivslot[] = { void serial_setbrg_dev(const int dev_index) { DECLARE_GLOBAL_DATA_PTR; - struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + struct s5p_uart *const uart = s5p_get_base_uart(dev_index); u32 pclk = get_pclk(); u32 baudrate = gd->baudrate; u32 val; @@ -83,7 +83,7 @@ void serial_setbrg_dev(const int dev_index) */ int serial_init_dev(const int dev_index) { - struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* reset and enable FIFOs, set triggers to the maximum */ writel(0, &uart->ufcon); @@ -100,7 +100,7 @@ int serial_init_dev(const int dev_index) static int serial_err_check(const int dev_index, int op) { - struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + struct s5p_uart *const uart = s5p_get_base_uart(dev_index); unsigned int mask; /* @@ -125,7 +125,7 @@ static int serial_err_check(const int dev_index, int op) */ int serial_getc_dev(const int dev_index) { - struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* wait for character to arrive */ while (!(readl(&uart->utrstat) & 0x1)) { @@ -141,7 +141,7 @@ int serial_getc_dev(const int dev_index) */ void serial_putc_dev(const char c, const int dev_index) { - struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* wait for room in the tx FIFO */ while (!(readl(&uart->utrstat) & 0x2)) { @@ -161,7 +161,7 @@ void serial_putc_dev(const char c, const int dev_index) */ int serial_tstc_dev(const int dev_index) { - struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + struct s5p_uart *const uart = s5p_get_base_uart(dev_index); return (int)(readl(&uart->utrstat) & 0x1); } @@ -193,14 +193,14 @@ void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); } s5p_serial##port##_puts, } DECLARE_S5P_SERIAL_FUNCTIONS(0); -struct serial_device s5pc1xx_serial0_device = +struct serial_device s5p_serial0_device = INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0"); DECLARE_S5P_SERIAL_FUNCTIONS(1); -struct serial_device s5pc1xx_serial1_device = +struct serial_device s5p_serial1_device = INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1"); DECLARE_S5P_SERIAL_FUNCTIONS(2); -struct serial_device s5pc1xx_serial2_device = +struct serial_device s5p_serial2_device = INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2"); DECLARE_S5P_SERIAL_FUNCTIONS(3); -struct serial_device s5pc1xx_serial3_device = +struct serial_device s5p_serial3_device = INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3"); diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h new file mode 100644 index 0000000000..2fbc6ad7f8 --- /dev/null +++ b/include/configs/guruplug.h @@ -0,0 +1,198 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_GURUPLUG_H +#define _CONFIG_GURUPLUG_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nMarvell-GuruPlug" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL 1 +#define CONFIG_ARM926EJS 1 /* Basic Architecture */ +#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_GURUPLUG /* Machine type */ + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ + +/* + * CLKs configurations + */ +#define CONFIG_SYS_HZ 1000 + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ + 115200,230400, 460800, 921600 } +/* auto boot */ +#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FAT +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB + +/* + * NAND configuration + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_KIRKWOOD +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ +#define NAND_ALLOW_ERASE_ALL 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0x40000 +#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ + "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ + "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ + "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ + "bootm 0x6400000;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "x_bootcmd_ethernet=ping 192.168.2.1\0" \ + "x_bootcmd_usb=usb start\0" \ + "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ + "x_bootargs=console=ttyS0,115200\0" \ + "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Other required configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ +#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ +#define CONFIG_SYS_MEMTEST_END 0x1fffffff /*(_512M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_CMD_MII +#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */ +#define CONFIG_PHY_BASE_ADR 0 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv88e1121 PHY */ +#endif /* CONFIG_CMD_NET */ + +/* + * USB/EHCI + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_SUPPORT_VFAT +#endif /* CONFIG_CMD_USB */ + +#define CONFIG_SYS_ALT_MEMTEST + +#endif /* _CONFIG_GURUPLUG_H */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h new file mode 100644 index 0000000000..1da860261a --- /dev/null +++ b/include/configs/imx27lite-common.h @@ -0,0 +1,237 @@ +/* + * Copyright (C) 2010 Heiko Schocher <hs@denx.de> + * + * based on: + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMX27LITE_COMMON_CONFIG_H +#define __IMX27LITE_COMMON_CONFIG_H + +/* + * SoC Configuration + */ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_MX27 +#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Lowlevel configuration + */ +#define SDRAM_ESDCFG_REGISTER_VAL(cas) \ + (ESDCFG_TRC(10) | \ + ESDCFG_TRCD(3) | \ + ESDCFG_TCAS(cas) | \ + ESDCFG_TRRD(1) | \ + ESDCFG_TRAS(5) | \ + ESDCFG_TWR | \ + ESDCFG_TMRD(2) | \ + ESDCFG_TRP(2) | \ + ESDCFG_TXP(3)) + +#define SDRAM_ESDCTL_REGISTER_VAL \ + (ESDCTL_PRCT(0) | \ + ESDCTL_BL | \ + ESDCTL_PWDT(0) | \ + ESDCTL_SREFR(3) | \ + ESDCTL_DSIZ_32 | \ + ESDCTL_COL10 | \ + ESDCTL_ROW13 | \ + ESDCTL_SDE) + +#define SDRAM_ALL_VAL 0xf00 + +#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ +#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 + +#define MPCTL0_VAL 0x1ef15d5 + +#define SPCTL0_VAL 0x043a1c09 + +#define CSCR_VAL 0x33f08107 + +#define PCDR0_VAL 0x120470c3 +#define PCDR1_VAL 0x03030303 +#define PCCR0_VAL 0xffffffff +#define PCCR1_VAL 0xfffffffc + +#define AIPI1_PSR0_VAL 0x20040304 +#define AIPI1_PSR1_VAL 0xdffbfcfb +#define AIPI2_PSR0_VAL 0x07ffc200 +#define AIPI2_PSR1_VAL 0xffffffff + +/* + * Memory Info + */ +/* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) +/* reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +/* memtest start address */ +#define CONFIG_SYS_MEMTEST_START 0xA0000000 +#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ +#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ + +/* + * Serial Driver info + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX27_UART1 +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Flash & Environment + */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +/* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +/* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +/* CS2 Base address */ +#define PHYS_FLASH_1 0xc0000000 +/* Flash Base for U-Boot */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ + CONFIG_SYS_FLASH_SECT_SZ) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* + * Ethernet + */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0x1f +#define CONFIG_MII +#define CONFIG_NET_MULTI + +/* + * MTD + */ +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_DEVICE + +/* + * NAND + */ +#define CONFIG_NAND_MXC +#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0xd8000000 +#define CONFIG_JFFS2_NAND +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +/* + * SD/MMC + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MXC_MMC +#define CONFIG_DOS_PARTITION + +/* + * MTD partitions + */ +#define CONFIG_CMD_MTDPARTS + +/* + * U-Boot general configuration + */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print buffer sz */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "kernel_addr_r=a0800000\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "rootpath=/opt/eldk-4.2-arm/arm\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm\0" \ + "bootcmd=run net_nfs\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};cp.b ${fileaddr} " \ + xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + +#endif /* __IMX27LITE_COMMON_CONFIG_H */ diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h index ee749ecd2f..72f6e80ede 100644 --- a/include/configs/imx27lite.h +++ b/include/configs/imx27lite.h @@ -20,158 +20,31 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* include common defines/options for all imx27lite related boards */ +#include "imx27lite-common.h" /* * SoC Configuration */ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_MX27 #define CONFIG_IMX27LITE -#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Lowlevel configuration - */ -#define SDRAM_ESDCFG_REGISTER_VAL(cas) \ - (ESDCFG_TRC(10) | \ - ESDCFG_TRCD(3) | \ - ESDCFG_TCAS(cas) | \ - ESDCFG_TRRD(1) | \ - ESDCFG_TRAS(5) | \ - ESDCFG_TWR | \ - ESDCFG_TMRD(2) | \ - ESDCFG_TRP(2) | \ - ESDCFG_TXP(3)) - -#define SDRAM_ESDCTL_REGISTER_VAL \ - (ESDCTL_PRCT(0) | \ - ESDCTL_BL | \ - ESDCTL_PWDT(0) | \ - ESDCTL_SREFR(3) | \ - ESDCTL_DSIZ_32 | \ - ESDCTL_COL10 | \ - ESDCTL_ROW13 | \ - ESDCTL_SDE) - -#define SDRAM_ALL_VAL 0xf00 - -#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ -#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 - -#define MPCTL0_VAL 0x1ef15d5 - -#define SPCTL0_VAL 0x043a1c09 - -#define CSCR_VAL 0x33f08107 - -#define PCDR0_VAL 0x120470c3 -#define PCDR1_VAL 0x03030303 -#define PCCR0_VAL 0xffffffff -#define PCCR1_VAL 0xfffffffc - -#define AIPI1_PSR0_VAL 0x20040304 -#define AIPI1_PSR1_VAL 0xdffbfcfb -#define AIPI2_PSR0_VAL 0x07ffc200 -#define AIPI2_PSR1_VAL 0xffffffff - -/* - * Memory Info - */ -/* malloc() len */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) -/* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 -/* memtest start address */ -#define CONFIG_SYS_MEMTEST_START 0xA0000000 -#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ -#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ - -/* - * Serial Driver info - */ -#define CONFIG_MXC_UART -#define CONFIG_SYS_MX27_UART1 -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_HOSTNAME imx27 +#define CONFIG_BOARDNAME "LogicPD imx27lite\n" /* * Flash & Environment */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -/* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -/* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ #define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */ -/* end of flash */ #define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000) -/* CS2 Base address */ -#define PHYS_FLASH_1 0xc0000000 -/* Flash Base for U-Boot */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -/* Flash size 2MB */ #define PHYS_FLASH_SIZE 0x200000 -#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ - CONFIG_SYS_FLASH_SECT_SZ) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ #define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */ -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Ethernet - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x1f -#define CONFIG_MII -#define CONFIG_NET_MULTI - -/* - * MTD - */ -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_MTD_DEVICE - -/* - * NAND - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0xd8000000 -#define CONFIG_JFFS2_NAND -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* * SD/MMC */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MXC_MMC #define CONFIG_MXC_MCI_REGS_BASE 0x10014000 -#define CONFIG_DOS_PARTITION /* * MTD partitions */ -#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" #define MTDPARTS_DEFAULT \ "mtdparts=" \ @@ -186,69 +59,4 @@ "22m(rootfs)," \ "-(userfs)" -/* - * U-Boot general configuration - */ -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* Print buffer sz */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define xstr(s) str(s) -#define str(s) #s - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addmisc=setenv bootargs ${bootargs}\0" \ - "u-boot=imx27/u-boot.bin\0" \ - "kernel_addr_r=a0800000\0" \ - "hostname=imx27\0" \ - "bootfile=imx27/uImage\0" \ - "rootpath=/opt/eldk-4.2-arm/arm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm\0" \ - "bootcmd=run net_nfs\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ - " +${filesize};cp.b ${fileaddr} " \ - xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ - "upd=run load update\0" \ - #endif /* __CONFIG_H */ diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h new file mode 100644 index 0000000000..4fb7744bae --- /dev/null +++ b/include/configs/magnesium.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2010 Heiko Schocher <hs@denx.de> + * + * based on: + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* include common defines/options for all imx27lite related boards */ +#include "imx27lite-common.h" + +/* + * SoC Configuration + */ +#define CONFIG_MAGNESIUM +#define CONFIG_HOSTNAME magnesium +#define CONFIG_BOARDNAME "Projectiondesign magnesium\n" + +/* + * Flash & Environment + */ +#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */ +#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000) +#define PHYS_FLASH_SIZE 0x800000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */ + +/* + * NAND + */ +#define CONFIG_SYS_NAND_LARGEPAGE + +/* + * SD/MMC + */ +#define CONFIG_MXC_MCI_REGS_BASE 0x10013000 + +/* + * MTD partitions + */ +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=" \ + "physmap-flash.0:" \ + "256k(U-Boot)," \ + "7680k(user)," \ + "128k(env1)," \ + "128k(env2);" \ + "mxc_nand.0:" \ + "128k(IPL-SPL)," \ + "4m(kernel)," \ + "22m(rootfs)," \ + "-(userfs)" + +#endif /* __CONFIG_H */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 903fe6da7e..3626df73df 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -160,6 +160,9 @@ #define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define CONFIG_SYS_DDR_CLKSEL 0 +#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 + /*----------------------------------------------------------------------- * FLASH and environment organization */ diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h index 88f27baafd..d2f45028ae 100644 --- a/include/configs/openrd_base.h +++ b/include/configs/openrd_base.h @@ -99,9 +99,8 @@ #define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NAND #define CONFIG_CMD_MII +#define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB @@ -208,6 +207,7 @@ /* * File system */ +#define CONFIG_CMD_FAT #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 47bb8c09aa..a0b00e9706 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" @@ -51,26 +49,26 @@ /* clocks */ /* CKGR_MOR - enable main osc. */ #define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ + (AT91_PMC_MOR_MOSCEN | \ (255 << 8)) /* Main Oscillator Start-up Time */ #define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ + (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_PLLXR_OUT(3) | \ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_SLOW | \ + AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2 | \ + AT91_PMC_MCKR_PLLADIV_1) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_PLLA | \ + AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2 | \ + AT91_PMC_MCKR_PLLADIV_1) /* define PDC[31:16] as DATA[31:16] */ #define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 @@ -79,7 +77,7 @@ /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ #define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC) + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ @@ -122,32 +120,32 @@ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ #define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) + (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ + AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) + (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ + AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) + (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) + AT91_RSTC_CR_PROCRST | \ + AT91_RSTC_MR_ERSTL(1) | \ + AT91_RSTC_MR_ERSTL(2)) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -180,9 +178,9 @@ /* LED */ #define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PC12 -#define CONFIG_GREEN_LED AT91_PIN_PC13 -#define CONFIG_YELLOW_LED AT91_PIN_PC15 +#define CONFIG_RED_LED AT91_PIO_PORTC, 12 +#define CONFIG_GREEN_LED AT91_PIO_PORTC, 13 +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 15 #define CONFIG_BOOTDELAY 3 @@ -200,7 +198,6 @@ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI #undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS @@ -236,8 +233,8 @@ #define CONFIG_SYS_NAND_MASK_ALE (1 << 22) /* our CLE is AD21 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 21) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 16 /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 807dba8f42..9735e6a079 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -28,8 +28,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - /* ARM asynchronous clock */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -49,41 +47,37 @@ /* clocks */ #define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOSCEN | \ + (AT91_PMC_MOR_MOSCEN | \ (255 << 8)) /* Main Oscillator Start-up Time */ #define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ - AT91_PMC_OUT | \ - AT91_PMC_PLLCOUNT | /* PLL Counter */ \ + (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_PLLXR_OUT(3) | \ + AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\ (2 << 28) | /* PLL Clock Frequency Range */ \ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) #if (MAIN_PLL_DIV == 2) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_SLOW | \ + AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2) /* PCK/2 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91SAM9_PMC_MDIV_2 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_PLLA | \ + AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_2) #else /* PCK/4 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_CSS_SLOW | \ - AT91_PMC_PRES_1 | \ - AT91RM9200_PMC_MDIV_3 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_SLOW | \ + AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_4) /* PCK/4 = MCK Master Clock from PLLA */ #define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_CSS_PLLA | \ - AT91_PMC_PRES_1 | \ - AT91RM9200_PMC_MDIV_3 | \ - AT91_PMC_PDIV_1) + (AT91_PMC_MCKR_CSS_PLLA | \ + AT91_PMC_MCKR_PRES_1 | \ + AT91_PMC_MCKR_MDIV_4) #endif /* define PDC[31:16] as DATA[31:16] */ #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 @@ -91,8 +85,8 @@ #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ #define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | \ - AT91_MATRIX_EBI0_CS1A_SDRAMC) + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ + AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ @@ -135,32 +129,32 @@ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ #define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ - AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) + (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ + AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ - AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) + (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ + AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) + (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(6)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) + AT91_RSTC_CR_PROCRST | \ + AT91_RSTC_MR_ERSTL(1) | \ + AT91_RSTC_MR_ERSTL(2)) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -196,8 +190,8 @@ /* LED */ #define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */ -#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ +#define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* this is the power led */ +#define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* this is the user1 led */ #define CONFIG_BOOTDELAY 3 @@ -215,7 +209,6 @@ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI #undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS @@ -259,8 +252,8 @@ #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 30 #endif @@ -274,6 +267,11 @@ /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ +/* Slave EBI1, PSRAM connected */ +#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \ + AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \ + AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \ + AT91_MATRIX_SCFG_SLOT_CYCLE(255)) /* Ethernet */ #define CONFIG_MACB 1 diff --git a/include/configs/qong.h b/include/configs/qong.h index 61acb04f30..1d63b33b9b 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -41,7 +41,7 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 @@ -52,6 +52,8 @@ #define CONFIG_MXC_UART 1 #define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MX31_GPIO + /* FPGA */ #define CONFIG_QONG_FPGA 1 #define CONFIG_FPGA_BASE (CS1_BASE) @@ -95,7 +97,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_NET #define CONFIG_CMD_MII -#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_NAND /* * You can compile in a MAC address and your custom net settings by using @@ -192,6 +194,30 @@ #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ +/* + * NAND driver + */ + +#ifndef __ASSEMBLY__ +extern void qong_nand_plat_init(void *chip); +extern int qong_nand_rdy(void *chip); +#endif +#define CONFIG_NAND_PLAT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE CS3_BASE +#define NAND_PLAT_INIT() qong_nand_plat_init(nand) + +#define QONG_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 24)) +#define QONG_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 23)) +#define QONG_NAND_WRITE(addr, cmd) \ + do { \ + __REG8(addr) = cmd; \ + } while (0) + +#define NAND_PLAT_WRITE_CMD(chip, cmd) QONG_NAND_WRITE(QONG_NAND_CLE(chip), cmd) +#define NAND_PLAT_WRITE_ADR(chip, cmd) QONG_NAND_WRITE(QONG_NAND_ALE(chip), cmd) +#define NAND_PLAT_DEV_READY(chip) (qong_nand_rdy(chip)) + /*----------------------------------------------------------------------- * FLASH and environment organization */ @@ -206,7 +232,7 @@ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) /* Address and size of Redundant Environment Sector */ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) @@ -225,9 +251,15 @@ #define CONFIG_SYS_FLASH_PROTECTION 1 /* - * JFFS2 partitions + * Filesystem */ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=physmap-flash.0" diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index fc401a8f88..e9edc44950 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -85,6 +85,7 @@ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ + /* * Commands configuration */ @@ -93,7 +94,7 @@ #define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT +#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB @@ -123,8 +124,8 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */ +#define CONFIG_ENV_ADDR 0x60000 +#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ /* * Default environment variables @@ -145,14 +146,16 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */ /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Other required minimal configurations */ -#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ @@ -192,4 +195,18 @@ #define CONFIG_SUPPORT_VFAT #endif /* CONFIG_CMD_USB */ +/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO + #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/serial.h b/include/serial.h index 6423fbaea1..111edbec8f 100644 --- a/include/serial.h +++ b/include/serial.h @@ -52,10 +52,10 @@ extern struct serial_device s3c24xx_serial2_device; #endif #if defined(CONFIG_S5PC1XX) -extern struct serial_device s5pc1xx_serial0_device; -extern struct serial_device s5pc1xx_serial1_device; -extern struct serial_device s5pc1xx_serial2_device; -extern struct serial_device s5pc1xx_serial3_device; +extern struct serial_device s5p_serial0_device; +extern struct serial_device s5p_serial1_device; +extern struct serial_device s5p_serial2_device; +extern struct serial_device s5p_serial3_device; #endif #if defined(CONFIG_OMAP3_ZOOM2) diff --git a/tools/imximage.c b/tools/imximage.c index df2d8c4d7b..39f89c2b93 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -36,7 +36,7 @@ * Supported commands for configuration file */ static table_entry_t imximage_cmds[] = { - {CMD_BOOT_FROM, "BOOT_FROM", "boot comand", }, + {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, {CMD_DATA, "DATA", "Reg Write Data", }, {-1, "", "", }, }; |