summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/sun8i_emac.c55
1 files changed, 27 insertions, 28 deletions
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index c9798445c7..a7fb7ac405 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -285,10 +285,18 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
int ret;
u32 reg;
- reg = readl(priv->sysctl_reg + 0x30);
+ if (priv->variant == R40_GMAC) {
+ /* Select RGMII for R40 */
+ reg = readl(priv->sysctl_reg + 0x164);
+ reg |= CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
+ CCM_GMAC_CTRL_GPIT_RGMII |
+ CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY);
- if (priv->variant == R40_GMAC)
+ writel(reg, priv->sysctl_reg + 0x164);
return 0;
+ }
+
+ reg = readl(priv->sysctl_reg + 0x30);
if (priv->variant == H3_EMAC) {
ret = sun8i_emac_set_syscon_ephy(priv, &reg);
@@ -662,13 +670,6 @@ static void sun8i_emac_board_setup(struct emac_eth_dev *priv)
/* De-assert EMAC */
setbits_le32(&ccm->ahb_gate1, BIT(AHB_GATE_OFFSET_GMAC));
-
- /* Select RGMII for R40 */
- setbits_le32(&ccm->gmac_clk_cfg,
- CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
- CCM_GMAC_CTRL_GPIT_RGMII);
- setbits_le32(&ccm->gmac_clk_cfg,
- CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
} else {
/* Set clock gating for emac */
setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC));
@@ -850,25 +851,23 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
return -EINVAL;
}
- if (priv->variant != R40_GMAC) {
- offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
- if (offset < 0) {
- debug("%s: cannot find syscon node\n", __func__);
- return -EINVAL;
- }
- reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
- if (!reg) {
- debug("%s: cannot find reg property in syscon node\n",
- __func__);
- return -EINVAL;
- }
- priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
- offset, reg);
- if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
- debug("%s: Cannot find syscon base address\n",
- __func__);
- return -EINVAL;
- }
+ offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon");
+ if (offset < 0) {
+ debug("%s: cannot find syscon node\n", __func__);
+ return -EINVAL;
+ }
+
+ reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL);
+ if (!reg) {
+ debug("%s: cannot find reg property in syscon node\n",
+ __func__);
+ return -EINVAL;
+ }
+ priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob,
+ offset, reg);
+ if (priv->sysctl_reg == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot find syscon base address\n", __func__);
+ return -EINVAL;
}
pdata->phy_interface = -1;