summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/bcm2835_sdhost.c265
-rw-r--r--include/configs/rpi.h61
2 files changed, 83 insertions, 243 deletions
diff --git a/drivers/mmc/bcm2835_sdhost.c b/drivers/mmc/bcm2835_sdhost.c
index 96428333b0..1ce019af57 100644
--- a/drivers/mmc/bcm2835_sdhost.c
+++ b/drivers/mmc/bcm2835_sdhost.c
@@ -163,7 +163,6 @@ struct bcm2835_host {
int clock; /* Current clock speed */
unsigned int max_clk; /* Max possible freq */
unsigned int blocks; /* remaining PIO blocks */
- int irq; /* Device IRQ */
u32 ns_per_fifo_word;
@@ -173,14 +172,7 @@ struct bcm2835_host {
struct mmc_cmd *cmd; /* Current command */
struct mmc_data *data; /* Current data request */
- bool data_complete:1;/* Data finished before cmd */
bool use_busy:1; /* Wait for busy interrupt */
- bool wait_data_complete:1; /* Wait for data */
-
- /* for threaded irq handler */
- bool irq_block;
- bool irq_busy;
- bool irq_data;
struct udevice *dev;
struct mmc *mmc;
@@ -240,17 +232,9 @@ static void bcm2835_reset_internal(struct bcm2835_host *host)
writel(host->cdiv, host->ioaddr + SDCDIV);
}
-static int bcm2835_finish_command(struct bcm2835_host *host);
-
-static void bcm2835_wait_transfer_complete(struct bcm2835_host *host)
+static int bcm2835_wait_transfer_complete(struct bcm2835_host *host)
{
- int timediff;
- u32 alternate_idle;
-
- alternate_idle = (host->data->flags & MMC_DATA_READ) ?
- SDEDM_FSM_READWAIT : SDEDM_FSM_WRITESTART1;
-
- timediff = 0;
+ int timediff = 0;
while (1) {
u32 edm, fsm;
@@ -261,7 +245,10 @@ static void bcm2835_wait_transfer_complete(struct bcm2835_host *host)
if ((fsm == SDEDM_FSM_IDENTMODE) ||
(fsm == SDEDM_FSM_DATAMODE))
break;
- if (fsm == alternate_idle) {
+
+ if ((fsm == SDEDM_FSM_READWAIT) ||
+ (fsm == SDEDM_FSM_WRITESTART1) ||
+ (fsm == SDEDM_FSM_READDATA)) {
writel(edm | SDEDM_FORCE_DATA_MODE,
host->ioaddr + SDEDM);
break;
@@ -273,9 +260,11 @@ static void bcm2835_wait_transfer_complete(struct bcm2835_host *host)
"wait_transfer_complete - still waiting after %d retries\n",
timediff);
bcm2835_dumpregs(host);
- return;
+ return -ETIMEDOUT;
}
}
+
+ return 0;
}
static int bcm2835_transfer_block_pio(struct bcm2835_host *host, bool is_read)
@@ -322,6 +311,9 @@ static int bcm2835_transfer_block_pio(struct bcm2835_host *host, bool is_read)
fsm_state != SDEDM_FSM_READCRC)) ||
(!is_read &&
(fsm_state != SDEDM_FSM_WRITEDATA &&
+ fsm_state != SDEDM_FSM_WRITEWAIT1 &&
+ fsm_state != SDEDM_FSM_WRITEWAIT2 &&
+ fsm_state != SDEDM_FSM_WRITECRC &&
fsm_state != SDEDM_FSM_WRITESTART1 &&
fsm_state != SDEDM_FSM_WRITESTART2))) {
hsts = readl(host->ioaddr + SDHSTS);
@@ -358,9 +350,8 @@ static int bcm2835_transfer_pio(struct bcm2835_host *host)
is_read = (host->data->flags & MMC_DATA_READ) != 0;
ret = bcm2835_transfer_block_pio(host, is_read);
-
- if (host->wait_data_complete)
- bcm2835_wait_transfer_complete(host);
+ if (ret)
+ return ret;
sdhsts = readl(host->ioaddr + SDHSTS);
if (sdhsts & (SDHSTS_CRC16_ERROR |
@@ -379,21 +370,8 @@ static int bcm2835_transfer_pio(struct bcm2835_host *host)
return ret;
}
-static void bcm2835_set_transfer_irqs(struct bcm2835_host *host)
-{
- u32 all_irqs = SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN |
- SDHCFG_BUSY_IRPT_EN;
-
- host->hcfg = (host->hcfg & ~all_irqs) |
- SDHCFG_DATA_IRPT_EN |
- SDHCFG_BUSY_IRPT_EN;
-
- writel(host->hcfg, host->ioaddr + SDHCFG);
-}
-
-static
-void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_cmd *cmd,
- struct mmc_data *data)
+static void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_cmd *cmd,
+ struct mmc_data *data)
{
WARN_ON(host->data);
@@ -401,14 +379,9 @@ void bcm2835_prepare_data(struct bcm2835_host *host, struct mmc_cmd *cmd,
if (!data)
return;
- host->wait_data_complete = cmd->cmdidx != MMC_CMD_READ_MULTIPLE_BLOCK;
- host->data_complete = false;
-
/* Use PIO */
host->blocks = data->blocks;
- bcm2835_set_transfer_irqs(host);
-
writel(data->blocksize, host->ioaddr + SDHBCT);
writel(data->blocks, host->ioaddr + SDHBLC);
}
@@ -483,36 +456,6 @@ static int bcm2835_send_command(struct bcm2835_host *host, struct mmc_cmd *cmd,
return 0;
}
-static int bcm2835_transfer_complete(struct bcm2835_host *host)
-{
- int ret = 0;
-
- WARN_ON(!host->data_complete);
-
- host->data = NULL;
-
- return ret;
-}
-
-static void bcm2835_finish_data(struct bcm2835_host *host)
-{
- host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
- writel(host->hcfg, host->ioaddr + SDHCFG);
-
- host->data_complete = true;
-
- if (host->cmd) {
- /* Data managed to finish before the
- * command completed. Make sure we do
- * things in the proper order.
- */
- dev_dbg(dev, "Finished early - HSTS %08x\n",
- readl(host->ioaddr + SDHSTS));
- } else {
- bcm2835_transfer_complete(host);
- }
-}
-
static int bcm2835_finish_command(struct bcm2835_host *host)
{
struct mmc_cmd *cmd = host->cmd;
@@ -562,8 +505,6 @@ static int bcm2835_finish_command(struct bcm2835_host *host)
/* Processed actual command. */
host->cmd = NULL;
- if (host->data && host->data_complete)
- ret = bcm2835_transfer_complete(host);
return ret;
}
@@ -608,159 +549,44 @@ static int bcm2835_check_data_error(struct bcm2835_host *host, u32 intmask)
return ret;
}
-static void bcm2835_busy_irq(struct bcm2835_host *host)
-{
- if (WARN_ON(!host->cmd)) {
- bcm2835_dumpregs(host);
- return;
- }
-
- if (WARN_ON(!host->use_busy)) {
- bcm2835_dumpregs(host);
- return;
- }
- host->use_busy = false;
-
- bcm2835_finish_command(host);
-}
-
-static void bcm2835_data_irq(struct bcm2835_host *host, u32 intmask)
+static int bcm2835_transmit(struct bcm2835_host *host)
{
+ u32 intmask = readl(host->ioaddr + SDHSTS);
int ret;
- /*
- * There are no dedicated data/space available interrupt
- * status bits, so it is necessary to use the single shared
- * data/space available FIFO status bits. It is therefore not
- * an error to get here when there is no data transfer in
- * progress.
- */
- if (!host->data)
- return;
-
+ /* Check for errors */
ret = bcm2835_check_data_error(host, intmask);
if (ret)
- goto finished;
-
- if (host->data->flags & MMC_DATA_WRITE) {
- /* Use the block interrupt for writes after the first block */
- host->hcfg &= ~(SDHCFG_DATA_IRPT_EN);
- host->hcfg |= SDHCFG_BLOCK_IRPT_EN;
- writel(host->hcfg, host->ioaddr + SDHCFG);
- bcm2835_transfer_pio(host);
- } else {
- bcm2835_transfer_pio(host);
- host->blocks--;
- if ((host->blocks == 0))
- goto finished;
- }
- return;
+ return ret;
-finished:
- host->hcfg &= ~(SDHCFG_DATA_IRPT_EN | SDHCFG_BLOCK_IRPT_EN);
- writel(host->hcfg, host->ioaddr + SDHCFG);
-}
-
-static void bcm2835_data_threaded_irq(struct bcm2835_host *host)
-{
- if (!host->data)
- return;
- if ((host->blocks == 0))
- bcm2835_finish_data(host);
-}
-
-static void bcm2835_block_irq(struct bcm2835_host *host)
-{
- if (WARN_ON(!host->data)) {
- bcm2835_dumpregs(host);
- return;
- }
-
- WARN_ON(!host->blocks);
- if ((--host->blocks == 0))
- bcm2835_finish_data(host);
- else
- bcm2835_transfer_pio(host);
-}
+ ret = bcm2835_check_cmd_error(host, intmask);
+ if (ret)
+ return ret;
-static irqreturn_t bcm2835_irq(int irq, void *dev_id)
-{
- irqreturn_t result = IRQ_NONE;
- struct bcm2835_host *host = dev_id;
- u32 intmask;
-
- intmask = readl(host->ioaddr + SDHSTS);
-
- writel(SDHSTS_BUSY_IRPT |
- SDHSTS_BLOCK_IRPT |
- SDHSTS_SDIO_IRPT |
- SDHSTS_DATA_FLAG,
- host->ioaddr + SDHSTS);
-
- if (intmask & SDHSTS_BLOCK_IRPT) {
- bcm2835_check_data_error(host, intmask);
- host->irq_block = true;
- result = IRQ_WAKE_THREAD;
+ /* Handle wait for busy end */
+ if (host->use_busy && (intmask & SDHSTS_BUSY_IRPT)) {
+ writel(SDHSTS_BUSY_IRPT, host->ioaddr + SDHSTS);
+ host->use_busy = false;
+ bcm2835_finish_command(host);
}
- if (intmask & SDHSTS_BUSY_IRPT) {
- if (!bcm2835_check_cmd_error(host, intmask)) {
- host->irq_busy = true;
- result = IRQ_WAKE_THREAD;
- } else {
- result = IRQ_HANDLED;
+ /* Handle PIO data transfer */
+ if (host->data) {
+ ret = bcm2835_transfer_pio(host);
+ if (ret)
+ return ret;
+ host->blocks--;
+ if (host->blocks == 0) {
+ /* Wait for command to complete for real */
+ ret = bcm2835_wait_transfer_complete(host);
+ if (ret)
+ return ret;
+ /* Transfer complete */
+ host->data = NULL;
}
}
- /* There is no true data interrupt status bit, so it is
- * necessary to qualify the data flag with the interrupt
- * enable bit.
- */
- if ((intmask & SDHSTS_DATA_FLAG) &&
- (host->hcfg & SDHCFG_DATA_IRPT_EN)) {
- bcm2835_data_irq(host, intmask);
- host->irq_data = true;
- result = IRQ_WAKE_THREAD;
- }
-
- return result;
-}
-
-static irqreturn_t bcm2835_threaded_irq(int irq, void *dev_id)
-{
- struct bcm2835_host *host = dev_id;
-
- if (host->irq_block) {
- host->irq_block = false;
- bcm2835_block_irq(host);
- }
-
- if (host->irq_busy) {
- host->irq_busy = false;
- bcm2835_busy_irq(host);
- }
-
- if (host->irq_data) {
- host->irq_data = false;
- bcm2835_data_threaded_irq(host);
- }
-
- return IRQ_HANDLED;
-}
-
-static void bcm2835_irq_poll(struct bcm2835_host *host)
-{
- u32 intmask;
-
- while (1) {
- intmask = readl(host->ioaddr + SDHSTS);
- if (intmask & (SDHSTS_BUSY_IRPT | SDHSTS_BLOCK_IRPT |
- SDHSTS_SDIO_IRPT | SDHSTS_DATA_FLAG)) {
- bcm2835_irq(0, host);
- bcm2835_threaded_irq(0, host);
- return;
- }
- }
+ return 0;
}
static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock)
@@ -864,8 +690,11 @@ static int bcm2835_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
}
/* Wait for completion of busy signal or data transfer */
- while (host->use_busy || host->data)
- bcm2835_irq_poll(host);
+ while (host->use_busy || host->data) {
+ ret = bcm2835_transmit(host);
+ if (ret)
+ break;
+ }
return ret;
}
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 69a22e1700..649a425bcd 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -95,39 +95,50 @@
*
* I suspect address 0 is used as the SMP pen on the RPi2, so avoid this.
*
- * fdt_addr_r simply shouldn't overlap anything else. However, the RPi's
- * binary firmware loads a DT to address 0x100, so we choose this address to
- * match it. This allows custom boot scripts to pass this DT on to Linux
- * simply by not over-writing the data at this address. When using U-Boot,
- * U-Boot (and scripts it executes) typicaly ignore the DT loaded by the FW
- * and loads its own DT from disk (triggered by boot.scr or extlinux.conf).
+ * Older versions of the boot firmware place the firmware-loaded DTB at 0x100,
+ * newer versions place it in high memory. So prevent U-Boot from doing its own
+ * DTB + initrd relocation so that we won't accidentally relocate the initrd
+ * over the firmware-loaded DTB and generally try to lay out things starting
+ * from the bottom of RAM.
*
- * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
- * something else. Put it low in memory to avoid conflicts.
+ * kernel_addr_r has different constraints on ARM and Aarch64. For 32-bit ARM,
+ * it must be within the first 128M of RAM in order for the kernel's
+ * CONFIG_AUTO_ZRELADDR option to work. The kernel itself will be decompressed
+ * to 0x8000 but the decompressor clobbers 0x4000-0x8000 as well. The
+ * decompressor also likes to relocate itself to right past the end of the
+ * decompressed kernel, so in total the sum of the compressed and and
+ * decompressed kernel needs to be reserved.
*
- * kernel_addr_r must be within the first 128M of RAM in order for the
- * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
- * decompress itself to 0x8000 after the start of RAM, kernel_addr_r
- * should not overlap that area, or the kernel will have to copy itself
- * somewhere else before decompression. Similarly, the address of any other
- * data passed to the kernel shouldn't overlap the start of RAM. Pushing
- * this up to 16M allows for a sizable kernel to be decompressed below the
- * compressed load address.
+ * For Aarch64, the kernel image is uncompressed and must be loaded at
+ * text_offset bytes (specified in the header of the Image) into a 2MB
+ * boundary. The 'booti' command relocates the image if necessary. Linux uses
+ * a default text_offset of 0x80000. In summary, loading at 0x80000
+ * satisfies all these constraints and reserving memory up to 0x02400000
+ * permits fairly large (roughly 36M) kernels.
*
- * scriptaddr can be pretty much anywhere that doesn't conflict with something
- * else. Choosing 32M allows for the compressed kernel to be up to 16M.
+ * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
+ * conflict with something else. Reserving 1M for each of them at
+ * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
*
- * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
- * for any boot script to be up to 1M, which is hopefully plenty.
+ * On ARM, both the DTB and any possible initrd must be loaded such that they
+ * fit inside the lowmem mapping in Linux. In practice, this usually means not
+ * more than ~700M away from the start of the kernel image but this number can
+ * be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
+ * parameter given to the kernel. So reserving memory from low to high
+ * satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
+ * the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
+ * Even with the smallest possible CPU-GPU memory split of the CPU getting
+ * only 64M, the remaining 25M starting at 0x02700000 should allow quite
+ * large initrds before they start colliding with U-Boot.
*/
#define ENV_MEM_LAYOUT_SETTINGS \
"fdt_high=ffffffff\0" \
"initrd_high=ffffffff\0" \
- "fdt_addr_r=0x00000100\0" \
- "pxefile_addr_r=0x00100000\0" \
- "kernel_addr_r=0x01000000\0" \
- "scriptaddr=0x02000000\0" \
- "ramdisk_addr_r=0x02100000\0" \
+ "kernel_addr_r=0x00080000\0" \
+ "scriptaddr=0x02400000\0" \
+ "pxefile_addr_r=0x02500000\0" \
+ "fdt_addr_r=0x02600000\0" \
+ "ramdisk_addr_r=0x02700000\0"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \