diff options
-rw-r--r-- | board/inka4x0/Makefile | 4 | ||||
-rw-r--r-- | board/inka4x0/inka4x0.c | 20 | ||||
-rw-r--r-- | board/inka4x0/inkadiag.c | 514 | ||||
-rw-r--r-- | include/configs/inka4x0.h | 1 | ||||
-rw-r--r-- | include/ns16550.h | 11 |
5 files changed, 546 insertions, 4 deletions
diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile index 442e2d0df2..82aa950017 100644 --- a/board/inka4x0/Makefile +++ b/board/inka4x0/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2006 +# (C) Copyright 2003-2009 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o +COBJS := $(BOARD).o inkadiag.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c index 507196bb2f..bb5c25d3b6 100644 --- a/board/inka4x0/inka4x0.c +++ b/board/inka4x0/inka4x0.c @@ -1,6 +1,9 @@ /* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2008-2009 + * Andreas Pfefferle, DENX Software Engineering, ap@denx.de. + * + * (C) Copyright 2009 + * Detlev Zundel, DENX Software Engineering, dzu@denx.de. * * (C) Copyright 2004 * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. @@ -8,6 +11,9 @@ * (C) Copyright 2004 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de * + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * * See file CREDITS for list of people who contributed to this * project. * @@ -171,6 +177,16 @@ void flash_preinit(void) *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ } +int misc_init_r (void) { + extern int inkadiag_init_r (void); + + /* + * The command table used for the subcommands of inkadiag + * needs to be relocated manually. + */ + return inkadiag_init_r(); +} + int misc_init_f (void) { char tmp[10]; diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c new file mode 100644 index 0000000000..06c980713b --- /dev/null +++ b/board/inka4x0/inkadiag.c @@ -0,0 +1,514 @@ +/* + * (C) Copyright 2008, 2009 Andreas Pfefferle, + * DENX Software Engineering, ap@denx.de. + * (C) Copyright 2009 Detlev Zundel, + * DENX Software Engineering, dzu@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/io.h> +#include <common.h> +#include <config.h> +#include <mpc5xxx.h> +#include <pci.h> + +#include <command.h> + +/* This is needed for the includes in ns16550.h */ +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#include <ns16550.h> + +#define GPIO_BASE ((u_char *)CONFIG_SYS_CS3_START) + +#define DIGIN_TOUCHSCR_MASK 0x00003000 /* Inputs 12-13 */ +#define DIGIN_KEYB_MASK 0x00010000 /* Input 16 */ + +#define DIGIN_DRAWER_SW1 0x00400000 /* Input 22 */ +#define DIGIN_DRAWER_SW2 0x00800000 /* Input 23 */ + +#define DIGIO_LED0 0x00000001 /* Output 0 */ +#define DIGIO_LED1 0x00000002 /* Output 1 */ +#define DIGIO_LED2 0x00000004 /* Output 2 */ +#define DIGIO_LED3 0x00000008 /* Output 3 */ +#define DIGIO_LED4 0x00000010 /* Output 4 */ +#define DIGIO_LED5 0x00000020 /* Output 5 */ + +#define DIGIO_DRAWER1 0x00000100 /* Output 8 */ +#define DIGIO_DRAWER2 0x00000200 /* Output 9 */ + +#define SERIAL_PORT_BASE ((u_char *)CONFIG_SYS_CS2_START) + +#define PSC_OP1_RTS 0x01 +#define PSC_OP0_RTS 0x01 + +/* + * Table with supported baudrates (defined in inka4x0.h) + */ +static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; +#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0])) + +static unsigned int inka_digin_get_input(void) +{ + return in_8(GPIO_BASE + 0) << 0 | in_8(GPIO_BASE + 1) << 8 | + in_8(GPIO_BASE + 2) << 16 | in_8(GPIO_BASE + 3) << 24; +} + +#define LED_HIGH(NUM) \ + do { \ + setbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \ + } while (0) + +#define LED_LOW(NUM) \ + do { \ + clrbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \ + } while (0) + +#define CHECK_LED(NUM) \ + do { \ + if (state & (1 << NUM)) { \ + LED_HIGH(NUM); \ + } else { \ + LED_LOW(NUM); \ + } \ + } while (0) + +static void inka_digio_set_output(unsigned int state, int which) +{ + volatile struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + + if (which == 0) { + /* other */ + CHECK_LED(0); + CHECK_LED(1); + CHECK_LED(2); + CHECK_LED(3); + CHECK_LED(4); + CHECK_LED(5); + } else { + if (which == 1) { + /* drawer1 */ + if (state) { + clrbits_be32(&gpio->simple_dvo, 0x1000); + udelay(1); + setbits_be32(&gpio->simple_dvo, 0x1000); + } else { + setbits_be32(&gpio->simple_dvo, 0x1000); + udelay(1); + clrbits_be32(&gpio->simple_dvo, 0x1000); + } + } + if (which == 2) { + /* drawer 2 */ + if (state) { + clrbits_be32(&gpio->simple_dvo, 0x2000); + udelay(1); + setbits_be32(&gpio->simple_dvo, 0x2000); + } else { + setbits_be32(&gpio->simple_dvo, 0x2000); + udelay(1); + clrbits_be32(&gpio->simple_dvo, 0x2000); + } + } + } + udelay(1); +} + +static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc, + char *argv[]) { + unsigned int state, val; + + switch (argc) { + case 3: + /* Write a value */ + val = simple_strtol(argv[2], NULL, 16); + + if (strcmp(argv[1], "drawer1") == 0) { + inka_digio_set_output(val, 1); + } else if (strcmp(argv[1], "drawer2") == 0) { + inka_digio_set_output(val, 2); + } else if (strcmp(argv[1], "other") == 0) + inka_digio_set_output(val, 0); + else { + printf("Invalid argument: %s\n", argv[1]); + return -1; + } + /* fall through */ + case 2: + /* Read a value */ + state = inka_digin_get_input(); + + if (strcmp(argv[1], "drawer1") == 0) { + val = (state & DIGIN_DRAWER_SW1) >> (ffs(DIGIN_DRAWER_SW1) - 1); + } else if (strcmp(argv[1], "drawer2") == 0) { + val = (state & DIGIN_DRAWER_SW2) >> (ffs(DIGIN_DRAWER_SW2) - 1); + } else if (strcmp(argv[1], "other") == 0) { + val = ((state & DIGIN_KEYB_MASK) >> (ffs(DIGIN_KEYB_MASK) - 1)) + | (state & DIGIN_TOUCHSCR_MASK) >> (ffs(DIGIN_TOUCHSCR_MASK) - 2); + } else { + printf("Invalid argument: %s\n", argv[1]); + return -1; + } + printf("exit code: 0x%X\n", val); + return 0; + default: + cmd_usage(cmdtp); + break; + } + + return -1; +} + +DECLARE_GLOBAL_DATA_PTR; + +static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate) +{ + unsigned long baseclk; + int div; + + /* reset PSC */ + out_8(&psc->command, PSC_SEL_MODE_REG_1); + + /* select clock sources */ + + out_be16(&psc->psc_clock_select, 0); + baseclk = (gd->ipb_clk + 16) / 32; + + /* switch to UART mode */ + out_be32(&psc->sicr, 0); + + /* configure parity, bit length and so on */ + + out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE); + out_8(&psc->mode, PSC_MODE_ONE_STOP); + + /* set up UART divisor */ + div = (baseclk + (baudrate / 2)) / baudrate; + out_8(&psc->ctur, (div >> 8) & 0xff); + out_8(&psc->ctlr, div & 0xff); + + /* disable all interrupts */ + out_be16(&psc->psc_imr, 0); + + /* reset and enable Rx/Tx */ + out_8(&psc->command, PSC_RST_RX); + out_8(&psc->command, PSC_RST_TX); + out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE); + + return 0; +} + +static void ser_putc(volatile struct mpc5xxx_psc *psc, const char c) +{ + /* Wait 1 second for last character to go. */ + int i = 0; + + while (!(psc->psc_status & PSC_SR_TXEMP) && (i++ < 1000000/10)) + udelay(10); + psc->psc_buffer_8 = c; + +} + +static int ser_getc(volatile struct mpc5xxx_psc *psc) +{ + /* Wait for a character to arrive. */ + int i = 0; + + while (!(in_be16(&psc->psc_status) & PSC_SR_RXRDY) && (i++ < 1000000/10)) + udelay(10); + + return in_8(&psc->psc_buffer_8); +} + +static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc, + char *argv[]) { + volatile struct NS16550 *uart; + volatile struct mpc5xxx_psc *psc; + unsigned int num, mode; + int combrd, baudrate, i, j, len; + int address; + + if (argc < 5) { + cmd_usage(cmdtp); + return 1; + } + + argc--; + argv++; + + num = simple_strtol(argv[0], NULL, 0); + if (num < 0 || num > 11) { + printf("invalid argument for num: %d\n", num); + return -1; + } + + mode = simple_strtol(argv[1], NULL, 0); + + combrd = 0; + baudrate = simple_strtoul(argv[2], NULL, 10); + for (i=0; i<N_BAUDRATES; ++i) { + if (baudrate == baudrate_table[i]) + break; + } + if (i == N_BAUDRATES) { + printf("## Baudrate %d bps not supported\n", + baudrate); + return 1; + } + combrd = 115200 / baudrate; + + uart = (struct NS16550 *)(SERIAL_PORT_BASE + (num << 3)); + + printf("Testing uart %d.\n\n", num); + + if ((num >= 0) && (num <= 7)) { + if (mode & 1) { + /* turn on 'loopback' mode */ + out_8(&uart->mcr, MCR_LOOP); + } else { + /* + * establish the UART's operational parameters + * set DLAB=1, so rbr accesses DLL + */ + out_8(&uart->lcr, LCR_DLAB); + /* set baudrate */ + out_8(&uart->rbr, combrd); + /* set data-format: 8-N-1 */ + out_8(&uart->lcr, LCR_WLS_8); + } + + if (mode & 2) { + /* set request to send */ + out_8(&uart->mcr, MCR_RTS); + udelay(10); + /* check clear to send */ + if ((in_8(&uart->msr) & MSR_CTS) == 0x00) + return -1; + } + if (mode & 4) { + /* set data terminal ready */ + out_8(&uart->mcr, MCR_DTR); + udelay(10); + /* check data set ready and carrier detect */ + if ((in_8(&uart->msr) & (MSR_DSR | MSR_DCD)) + != (MSR_DSR | MSR_DCD)) + return -1; + } + + /* write each message-character, read it back, and display it */ + for (i = 0, len = strlen(argv[3]); i < len; ++i) { + j = 0; + while ((in_8(&uart->lsr) & LSR_THRE) == 0x00) { + if (j++ > CONFIG_SYS_HZ) + break; + udelay(10); + } + out_8(&uart->rbr, argv[3][i]); + j = 0; + while ((in_8(&uart->lsr) & LSR_DR) == 0x00) { + if (j++ > CONFIG_SYS_HZ) + break; + udelay(10); + } + printf("%c", in_8(&uart->rbr)); + } + printf("\n\n"); + out_8(&uart->mcr, 0x00); + } else { + address = 0; + + switch (num) { + case 8: + address = MPC5XXX_PSC6; + break; + case 9: + address = MPC5XXX_PSC3; + break; + case 10: + address = MPC5XXX_PSC2; + break; + case 11: + address = MPC5XXX_PSC1; + break; + } + psc = (struct mpc5xxx_psc *)address; + ser_init(psc, simple_strtol(argv[2], NULL, 0)); + if (mode & 2) { + /* set request to send */ + out_8(&psc->op0, PSC_OP0_RTS); + udelay(10); + /* check clear to send */ + if ((in_8(&psc->ip) & PSC_IPCR_CTS) == 0) + return -1; + } + len = strlen(argv[3]); + for (i = 0; i < len; ++i) { + ser_putc(psc, argv[3][i]); + printf("%c", ser_getc(psc)); + } + printf("\n\n"); + } + return 0; +} + +#define BUZZER_GPT (MPC5XXX_GPT + 0x60) /* GPT6 */ +static void buzzer_turn_on(unsigned int freq) +{ + volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT); + + const u32 prescale = gd->ipb_clk / freq / 128; + const u32 count = 128; + const u32 width = 64; + + gpt->cir = (prescale << 16) | count; + gpt->pwmcr = width << 16; + gpt->emsr = 3; /* Timer enabled for PWM */ +} + +static void buzzer_turn_off(void) +{ + volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT); + + gpt->emsr = 0; +} + +static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc, + char *argv[]) { + + unsigned int period, freq; + int prev, i; + + if (argc != 3) { + cmd_usage(cmdtp); + return 1; + } + + argc--; + argv++; + + period = simple_strtol(argv[0], NULL, 0); + if (!period) + printf("Zero period is senseless\n"); + argc--; + argv++; + + freq = simple_strtol(argv[0], NULL, 0); + /* avoid zero prescale in buzzer_turn_on() */ + if (freq > gd->ipb_clk / 128) { + printf("%dHz exceeds maximum (%ldHz)\n", freq, + gd->ipb_clk / 128); + } else if (!freq) + printf("Zero frequency is senseless\n"); + else + buzzer_turn_on(freq); + + clear_ctrlc(); + prev = disable_ctrlc(0); + + printf("Buzzing for %d ms. Type ^C to abort!\n\n", period); + + i = 0; + while (!ctrlc() && (i++ < CONFIG_SYS_HZ)) + udelay(period); + + clear_ctrlc(); + disable_ctrlc(prev); + + buzzer_turn_off(); + + return 0; +} + +static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +cmd_tbl_t cmd_inkadiag_sub[] = { + U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input", + "<drawer1|drawer2|other> [value] - get or set specified signal\n"), + U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port", + "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n" + "and baudrate with msg\n"), + U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer", + "<period> <freq> - turn buzzer on for period ms with freq hz\n"), + U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help", + "[command] - get help for command\n"), +}; + +static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, + int argc, char *argv[]) { + extern int _do_help (cmd_tbl_t *cmd_start, int cmd_items, + cmd_tbl_t *cmdtp, int flag, + int argc, char *argv[]); + /* do_help prints command name - we prepend inkadiag to our subcommands! */ +#ifdef CONFIG_SYS_LONGHELP + puts ("inkadiag "); +#endif + return _do_help(&cmd_inkadiag_sub[0], + ARRAY_SIZE(cmd_inkadiag_sub), cmdtp, flag, argc, argv); +} + +static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc, + char *argv[]) { + cmd_tbl_t *c; + + c = find_cmd_tbl(argv[1], &cmd_inkadiag_sub[0], ARRAY_SIZE(cmd_inkadiag_sub)); + + if (c) { + argc--; + argv++; + return c->cmd(c, flag, argc, argv); + } else { + /* Unrecognized command */ + cmd_usage(cmdtp); + return 1; + } +} + +U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag, + "inkadiag - inka diagnosis\n", + "[inkadiag what ...]\n" + " - perform a diagnosis on inka hardware\n" + "'inkadiag' performs hardware tests.\n\n"); + +/* Relocate the command table function pointers when running in RAM */ +int inkadiag_init_r (void) { + cmd_tbl_t *cmdtp; + + for (cmdtp = &cmd_inkadiag_sub[0]; cmdtp != + &cmd_inkadiag_sub[ARRAY_SIZE(cmd_inkadiag_sub)]; cmdtp++) { + ulong addr; + + addr = (ulong) (cmdtp->cmd) + gd->reloc_off; + cmdtp->cmd = (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr; + + addr = (ulong)(cmdtp->name) + gd->reloc_off; + cmdtp->name = (char *)addr; + + if (cmdtp->usage) { + addr = (ulong)(cmdtp->usage) + gd->reloc_off; + cmdtp->usage = (char *)addr; + } +#ifdef CONFIG_SYS_LONGHELP + if (cmdtp->help) { + addr = (ulong)(cmdtp->help) + gd->reloc_off; + cmdtp->help = (char *)addr; + } +#endif + } + return 0; +} diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index e42fa6dcc8..b80796d023 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -39,6 +39,7 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* Use misc_init_r() */ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ diff --git a/include/ns16550.h b/include/ns16550.h index e6ade61a22..edfbc53a52 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -123,6 +123,7 @@ typedef volatile struct NS16550 *NS16550_t; #define MCR_RTS 0x02 #define MCR_DMA_EN 0x04 #define MCR_TX_DFR 0x08 +#define MCR_LOOP 0x10 /* Enable loopback test mode */ #define LCR_WLS_MSK 0x03 /* character length select mask */ #define LCR_WLS_5 0x00 /* 5 bit character length */ @@ -135,6 +136,7 @@ typedef volatile struct NS16550 *NS16550_t; #define LCR_STKP 0x20 /* Stick Parity */ #define LCR_SBRK 0x40 /* Set Break */ #define LCR_BKSE 0x80 /* Bank select enable */ +#define LCR_DLAB 0x80 /* Divisor latch access bit */ #define LSR_DR 0x01 /* Data ready */ #define LSR_OE 0x02 /* Overrun */ @@ -145,6 +147,15 @@ typedef volatile struct NS16550 *NS16550_t; #define LSR_TEMT 0x40 /* Xmitter empty */ #define LSR_ERR 0x80 /* Error */ +#define MSR_DCD 0x80 /* Data Carrier Detect */ +#define MSR_RI 0x40 /* Ring Indicator */ +#define MSR_DSR 0x20 /* Data Set Ready */ +#define MSR_CTS 0x10 /* Clear to Send */ +#define MSR_DDCD 0x08 /* Delta DCD */ +#define MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define MSR_DDSR 0x02 /* Delta DSR */ +#define MSR_DCTS 0x01 /* Delta CTS */ + #ifdef CONFIG_OMAP1510 #define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */ #endif |