diff options
-rw-r--r-- | Makefile | 2 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/ls102xa/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/ls102xa/soc.c | 44 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h | 2 | ||||
-rw-r--r-- | board/freescale/ls1021aiot/ls1021aiot.c | 2 | ||||
-rw-r--r-- | board/freescale/ls1021aqds/ddr.c | 2 | ||||
-rw-r--r-- | board/freescale/ls1021aqds/ddr.h | 3 | ||||
-rw-r--r-- | board/freescale/ls1021aqds/ls1021aqds.c | 30 | ||||
-rw-r--r-- | board/freescale/ls1021atwr/ls1021atwr.c | 2 | ||||
-rw-r--r-- | board/freescale/lx2160a/eth_lx2160aqds.c | 38 | ||||
-rw-r--r-- | cmd/fastboot.c | 2 | ||||
-rw-r--r-- | drivers/fastboot/fb_common.c | 2 | ||||
-rw-r--r-- | drivers/net/fsl-mc/mc.c | 26 | ||||
-rw-r--r-- | drivers/net/ldpaa_eth/ls1088a.c | 4 | ||||
-rw-r--r-- | drivers/net/ldpaa_eth/lx2160a.c | 4 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/udc-uclass.c | 7 | ||||
-rw-r--r-- | include/configs/ls1021aiot.h | 2 | ||||
-rw-r--r-- | include/configs/ls1021atwr.h | 2 | ||||
-rw-r--r-- | include/configs/ls1088a_common.h | 2 | ||||
-rw-r--r-- | include/configs/ls2080a_common.h | 2 | ||||
-rw-r--r-- | include/configs/lx2160a_common.h | 2 | ||||
-rw-r--r-- | lib/efi_selftest/efi_freestanding.c | 11 | ||||
-rw-r--r-- | scripts/Makefile.lib | 2 |
23 files changed, 138 insertions, 61 deletions
@@ -3,7 +3,7 @@ VERSION = 2019 PATCHLEVEL = 04 SUBLEVEL = -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = # *DOCUMENTATION* diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 5d6a711c14..94fa68250d 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -4,6 +4,7 @@ config ARCH_LS1021A select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR select SYS_FSL_ERRATUM_A008378 select SYS_FSL_ERRATUM_A008407 + select SYS_FSL_ERRATUM_A008850 select SYS_FSL_ERRATUM_A008997 select SYS_FSL_ERRATUM_A009007 select SYS_FSL_ERRATUM_A009008 @@ -63,6 +64,11 @@ config SYS_CCI400_OFFSET Offset for CCI400 base. CCI400 base addr = CCSRBAR + CCI400_OFFSET +config SYS_FSL_ERRATUM_A008850 + bool + help + Workaround for DDR erratum A008850 + config SYS_FSL_ERRATUM_A008997 bool help diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c index 448d951c36..a779d33739 100644 --- a/arch/arm/cpu/armv7/ls102xa/soc.c +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -11,6 +11,7 @@ #include <asm/arch/ls102xa_soc.h> #include <asm/arch/ls102xa_stream_id.h> #include <fsl_csu.h> +#include <fsl_ddr_sdram.h> struct liodn_id_table sec_liodn_tbl[] = { SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10), @@ -103,6 +104,41 @@ static void erratum_a009007(void) #endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */ } +static void erratum_a008850_early(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A008850 + /* part 1 of 2 */ + struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); + struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + + /* disables propagation of barrier transactions to DDRC from CCI400 */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); + + /* disable the re-ordering in DDRC */ + out_be32(&ddr->eor, DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); +#endif +} + +void erratum_a008850_post(void) +{ +#ifdef CONFIG_SYS_FSL_ERRATUM_A008850 + /* part 2 of 2 */ + struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + + CONFIG_SYS_CCI400_OFFSET); + struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + u32 tmp; + + /* enable propagation of barrier transactions to DDRC from CCI400 */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + + /* enable the re-ordering in DDRC */ + tmp = in_be32(&ddr->eor); + tmp &= ~(DDR_EOR_RD_REOD_DIS | DDR_EOR_WD_REOD_DIS); + out_be32(&ddr->eor, tmp); +#endif +} + void s_init(void) { } @@ -163,13 +199,6 @@ int arch_soc_init(void) */ out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - - /* Workaround for the issue that DDR could not respond to - * barrier transaction which is generated by executing DSB/ISB - * instruction. Set CCI-400 control override register to - * terminate the barrier transaction. After DDR is initialized, - * allow barrier transaction to DDR again */ - out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); } /* Enable all the snoop signal for various masters */ @@ -191,6 +220,7 @@ int arch_soc_init(void) out_be32(&scfg->eddrtqcfg, 0x63b20042); /* Erratum */ + erratum_a008850_early(); erratum_a009008(); erratum_a009798(); erratum_a008997(); diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h index 05e8b49c2d..1fde8bce5d 100644 --- a/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h +++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h @@ -10,6 +10,8 @@ unsigned int get_soc_major_rev(void); int arch_soc_init(void); int ls102xa_smmu_stream_id_init(void); +void erratum_a008850_post(void); + #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 void erratum_a010315(void); #endif diff --git a/board/freescale/ls1021aiot/ls1021aiot.c b/board/freescale/ls1021aiot/ls1021aiot.c index fb05b55b5c..70992a5ce4 100644 --- a/board/freescale/ls1021aiot/ls1021aiot.c +++ b/board/freescale/ls1021aiot/ls1021aiot.c @@ -97,6 +97,8 @@ int dram_init(void) ddrmc_init(); #endif + erratum_a008850_post(); + gd->ram_size = DDR_SIZE; return 0; } diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c index 98faf9389e..d3e2e53321 100644 --- a/board/freescale/ls1021aqds/ddr.c +++ b/board/freescale/ls1021aqds/ddr.c @@ -179,6 +179,8 @@ int fsl_initdram(void) fsl_dp_resume(); #endif + erratum_a008850_post(); + gd->ram_size = dram_size; return 0; diff --git a/board/freescale/ls1021aqds/ddr.h b/board/freescale/ls1021aqds/ddr.h index ff1fe8e2ec..58a8838436 100644 --- a/board/freescale/ls1021aqds/ddr.h +++ b/board/freescale/ls1021aqds/ddr.h @@ -5,6 +5,9 @@ #ifndef __DDR_H__ #define __DDR_H__ + +void erratum_a008850_post(void); + struct board_specific_parameters { u32 n_ranks; u32 datarate_mhz_high; diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index c08be1ee46..2ca2bd9909 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -200,10 +200,6 @@ int board_early_init_f(void) #ifdef CONFIG_SPL_BUILD void board_init_f(ulong dummy) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + - CONFIG_SYS_CCI400_OFFSET); - unsigned int major; - #ifdef CONFIG_NAND_BOOT struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; u32 porsr1, pinctl; @@ -240,10 +236,6 @@ void board_init_f(ulong dummy) i2c_init_all(); #endif - major = get_soc_major_rev(); - if (major == SOC_MAJOR_VER_1_0) - out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); - timer_init(); dram_init(); @@ -420,22 +412,12 @@ int misc_init_r(void) int board_init(void) { - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR + - CONFIG_SYS_CCI400_OFFSET); - unsigned int major; - #ifdef CONFIG_SYS_FSL_ERRATUM_A010315 erratum_a010315(); #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A009942 erratum_a009942_check_cpo(); #endif - major = get_soc_major_rev(); - if (major == SOC_MAJOR_VER_1_0) { - /* Set CCI-400 control override register to - * enable barrier transaction */ - out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); - } select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); @@ -456,18 +438,6 @@ int board_init(void) #if defined(CONFIG_DEEP_SLEEP) void board_sleep_prepare(void) { - struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR + - CONFIG_SYS_CCI400_OFFSET); - unsigned int major; - - major = get_soc_major_rev(); - if (major == SOC_MAJOR_VER_1_0) { - /* Set CCI-400 control override register to - * enable barrier transaction */ - out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); - } - - #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); #endif diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index beb82cebb6..01ba1bc962 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -222,6 +222,8 @@ int dram_init(void) ddrmc_init(); #endif + erratum_a008850_post(); + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) diff --git a/board/freescale/lx2160a/eth_lx2160aqds.c b/board/freescale/lx2160a/eth_lx2160aqds.c index 1e98d0c1f9..f6e22d7337 100644 --- a/board/freescale/lx2160a/eth_lx2160aqds.c +++ b/board/freescale/lx2160a/eth_lx2160aqds.c @@ -628,8 +628,9 @@ int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle) int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset) { char mdio_ioslot_str[] = "mdio@00"; - char mdio_mux_str[] = "mdio-mux-0"; struct lx2160a_qds_mdio *priv; + u64 reg; + u32 phandle; int offset, mux_val; /*Test if the MDIO bus is real mdio bus or muxing front end ?*/ @@ -643,15 +644,32 @@ int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset) debug("real_bus_num = %d, ioslot = %d\n", priv->realbusnum, priv->ioslot); - sprintf(mdio_mux_str, "mdio-mux-%1d", priv->realbusnum); - offset = fdt_subnode_offset(fdt, fpga_offset, mdio_mux_str); + if (priv->realbusnum == EMI1) + reg = CONFIG_SYS_FSL_WRIOP1_MDIO1; + else + reg = CONFIG_SYS_FSL_WRIOP1_MDIO2; + + offset = fdt_node_offset_by_compat_reg(fdt, "fsl,fman-memac-mdio", reg); + if (offset < 0) { + printf("mdio@%llx node not found in device tree\n", reg); + return offset; + } + + phandle = fdt_get_phandle(fdt, offset); + phandle = cpu_to_fdt32(phandle); + offset = fdt_node_offset_by_prop_value(fdt, -1, "mdio-parent-bus", + &phandle, 4); if (offset < 0) { - printf("%s node not found under node %s in device tree\n", - mdio_mux_str, fdt_get_name(fdt, fpga_offset, NULL)); + printf("mdio-mux-%d node not found in device tree\n", + priv->realbusnum == EMI1 ? 1 : 2); return offset; } mux_val = lx2160a_qds_get_mdio_mux_val(priv->realbusnum, priv->ioslot); + if (priv->realbusnum == EMI1) + mux_val >>= BRDCFG4_EMI1SEL_SHIFT; + else + mux_val >>= BRDCFG4_EMI2SEL_SHIFT; sprintf(mdio_ioslot_str, "mdio@%x", (u8)mux_val); offset = fdt_subnode_offset(fdt, offset, mdio_ioslot_str); @@ -675,7 +693,9 @@ int fdt_create_phy_node(void *fdt, int offset, u8 phyaddr, int *subnodeoffset, *subnodeoffset = fdt_add_subnode(fdt, offset, phy_node_name); if (*subnodeoffset <= 0) { - printf("Could not add subnode %s\n", phy_node_name); + printf("Could not add subnode %s inside node %s err = %s\n", + phy_node_name, fdt_get_name(fdt, offset, NULL), + fdt_strerror(*subnodeoffset)); return *subnodeoffset; } @@ -779,7 +799,6 @@ int fdt_fixup_board_phy(void *fdt) } if (dpmac_id == NUM_WRIOP_PORTS) continue; - ret = fdt_create_phy_node(fdt, offset, i, &subnodeoffset, phy_dev, phandle); @@ -792,6 +811,11 @@ int fdt_fixup_board_phy(void *fdt) fdt_del_node(fdt, subnodeoffset); break; } + /* calculate offset again as new node addition may have + * changed offset; + */ + offset = fdt_get_ioslot_offset(fdt, mii_dev, + fpga_offset); phandle++; } diff --git a/cmd/fastboot.c b/cmd/fastboot.c index 0be83b78ac..1b4215114d 100644 --- a/cmd/fastboot.c +++ b/cmd/fastboot.c @@ -13,6 +13,7 @@ #include <fastboot.h> #include <net.h> #include <usb.h> +#include <watchdog.h> static int do_fastboot_udp(int argc, char *const argv[], uintptr_t buf_addr, size_t buf_size) @@ -74,6 +75,7 @@ static int do_fastboot_usb(int argc, char *const argv[], break; if (ctrlc()) break; + WATCHDOG_RESET(); usb_gadget_handle_interrupts(controller_index); } diff --git a/drivers/fastboot/fb_common.c b/drivers/fastboot/fb_common.c index c6e06aab7a..17eca73be0 100644 --- a/drivers/fastboot/fb_common.c +++ b/drivers/fastboot/fb_common.c @@ -119,7 +119,7 @@ void fastboot_boot(void) if (s) { run_command(s, CMD_FLAG_ENV); } else { - static char boot_addr_start[12]; + static char boot_addr_start[20]; static char *const bootm_args[] = { "bootm", boot_addr_start, NULL }; diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index a51b8a4625..cc59b21f9f 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -28,6 +28,7 @@ #define MC_MEM_SIZE_ENV_VAR "mcmemsize" #define MC_BOOT_TIMEOUT_ENV_VAR "mcboottimeout" #define MC_BOOT_ENV_VAR "mcinitcmd" +#define MC_DRAM_BLOCK_DEFAULT_SIZE (512UL * 1024 * 1024) DECLARE_GLOBAL_DATA_PTR; static int mc_memset_resv_ram; @@ -421,9 +422,11 @@ static int mc_fixup_dpc(u64 dpc_addr) /* fixup MAC addresses for dpmac ports */ nodeoffset = fdt_path_offset(blob, "/board_info/ports"); if (nodeoffset < 0) - return 0; + goto out; err = mc_fixup_mac_addrs(blob, MC_FIXUP_DPC); + +out: flush_dcache_range(dpc_addr, dpc_addr + fdt_totalsize(blob)); return err; @@ -680,7 +683,8 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr) size_t mc_ram_size = mc_get_dram_block_size(); mc_ram_num_256mb_blocks = mc_ram_size / MC_RAM_SIZE_ALIGNMENT; - if (mc_ram_num_256mb_blocks < 1 || mc_ram_num_256mb_blocks > 0xff) { + + if (mc_ram_num_256mb_blocks >= 0xff) { error = -EINVAL; printf("fsl-mc: ERROR: invalid MC private RAM size (%lu)\n", mc_ram_size); @@ -688,6 +692,12 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr) } /* + * To support 128 MB DDR Size for MC + */ + if (mc_ram_num_256mb_blocks == 0) + mc_ram_num_256mb_blocks = 0xFF; + + /* * Management Complex cores should be held at reset out of POR. * U-Boot should be the first software to touch MC. To be safe, * we reset all cores again by setting GCR1 to 0. It doesn't do @@ -727,8 +737,14 @@ int mc_init(u64 mc_fw_addr, u64 mc_dpc_addr) /* * Tell MC what is the address range of the DRAM block assigned to it: */ - reg_mcfbalr = (u32)mc_ram_addr | - (mc_ram_num_256mb_blocks - 1); + if (mc_ram_num_256mb_blocks < 0xFF) { + reg_mcfbalr = (u32)mc_ram_addr | + (mc_ram_num_256mb_blocks - 1); + } else { + reg_mcfbalr = (u32)mc_ram_addr | + (mc_ram_num_256mb_blocks); + } + out_le32(&mc_ccsr_regs->reg_mcfbalr, reg_mcfbalr); out_le32(&mc_ccsr_regs->reg_mcfbahr, (u32)(mc_ram_addr >> 32)); @@ -878,7 +894,7 @@ unsigned long mc_get_dram_block_size(void) "\' environment variable: %lu\n", dram_block_size); - dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + dram_block_size = MC_DRAM_BLOCK_DEFAULT_SIZE; } } diff --git a/drivers/net/ldpaa_eth/ls1088a.c b/drivers/net/ldpaa_eth/ls1088a.c index 43210532ba..c3260d318c 100644 --- a/drivers/net/ldpaa_eth/ls1088a.c +++ b/drivers/net/ldpaa_eth/ls1088a.c @@ -93,7 +93,7 @@ void fsl_rgmii_init(void) u32 ec; #ifdef CONFIG_SYS_FSL_EC1 - ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC1_REGSR - 1]) + ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC1_REGSR]) & FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK; ec >>= FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT; @@ -102,7 +102,7 @@ void fsl_rgmii_init(void) #endif #ifdef CONFIG_SYS_FSL_EC2 - ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC2_REGSR - 1]) + ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC2_REGSR]) & FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK; ec >>= FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT; diff --git a/drivers/net/ldpaa_eth/lx2160a.c b/drivers/net/ldpaa_eth/lx2160a.c index 7dd46c04f6..1fbeb0d14b 100644 --- a/drivers/net/ldpaa_eth/lx2160a.c +++ b/drivers/net/ldpaa_eth/lx2160a.c @@ -91,7 +91,7 @@ void fsl_rgmii_init(void) & FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK; ec >>= FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT; - if (!ec) + if (!ec && (wriop_is_enabled_dpmac(17) == -ENODEV)) wriop_init_dpmac_enet_if(17, PHY_INTERFACE_MODE_RGMII_ID); #endif @@ -100,7 +100,7 @@ void fsl_rgmii_init(void) & FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK; ec >>= FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT; - if (!ec) + if (!ec && (wriop_is_enabled_dpmac(18) == -ENODEV)) wriop_init_dpmac_enet_if(18, PHY_INTERFACE_MODE_RGMII_ID); #endif } diff --git a/drivers/usb/gadget/udc/udc-uclass.c b/drivers/usb/gadget/udc/udc-uclass.c index 8d7864797a..3053ccf7d9 100644 --- a/drivers/usb/gadget/udc/udc-uclass.c +++ b/drivers/usb/gadget/udc/udc-uclass.c @@ -23,8 +23,11 @@ int usb_gadget_initialize(int index) return 0; ret = uclass_get_device_by_seq(UCLASS_USB_GADGET_GENERIC, index, &dev); if (!dev || ret) { - pr_err("No USB device found\n"); - return -ENODEV; + ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, index, &dev); + if (!dev || ret) { + pr_err("No USB device found\n"); + return -ENODEV; + } } dev_array[index] = dev; return 0; diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 6be8df109b..4af3988886 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -85,6 +85,8 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + /* * Serial Port */ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 4b6760b600..da55bf2f43 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -104,6 +104,8 @@ #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ !defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FMAN_FW_IN_NOR diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index a80ce92881..50c18f1542 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -147,7 +147,7 @@ unsigned long long get_qixis_addr(void); */ #if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Command line configuration */ #define CONFIG_CMD_CACHE diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 60a0b42503..454c9e94b6 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -152,7 +152,7 @@ unsigned long long get_qixis_addr(void); * 512MB aligned, so the min size to hide is 512MB. */ #ifdef CONFIG_FSL_MC_ENET -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Command line configuration */ diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 4b5608b5a3..637619cb55 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -100,7 +100,7 @@ * 512MB aligned, so the min size to hide is 512MB. */ #ifdef CONFIG_FSL_MC_ENET -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) #endif /* I2C bus multiplexer */ diff --git a/lib/efi_selftest/efi_freestanding.c b/lib/efi_selftest/efi_freestanding.c new file mode 100644 index 0000000000..4b6c27e99f --- /dev/null +++ b/lib/efi_selftest/efi_freestanding.c @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Library for freestanding binary + * + * Copyright 2019, Heinrich Schuchardt <xypron.glpk@gmx.de> + * + * GCC requires that freestanding programs provide memcpy(), memmove(), + * memset(), and memcmp(). + */ + +#include "../efi_loader/efi_freestanding.c" diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index ec5c41ec56..70de9bb13a 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -390,7 +390,7 @@ $(obj)/efi_reloc.o: $(srctree)/arch/$(ARCH)/lib/$(EFI_RELOC:.o=.c) $(recordmcoun $(call cmd,force_checksrc) $(call if_changed_rule,cc_o_c) -$(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/../efi_loader/efi_freestanding.o +$(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_freestanding.o $(call cmd,efi_ld) # ACPI |