summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS2
-rw-r--r--board/davinci/da8xxevm/MAINTAINERS2
-rw-r--r--drivers/mtd/spi/spi-nor-core.c6
-rw-r--r--drivers/mtd/spi/spi-nor-ids.c5
-rw-r--r--drivers/net/bcm-sf2-eth.c2
-rw-r--r--drivers/net/dwc_eth_qos.c2
-rw-r--r--drivers/phy/ti-pipe3-phy.c281
-rw-r--r--drivers/spi/rk_spi.c10
-rw-r--r--drivers/usb/cdns3/ep0.c1
-rw-r--r--drivers/usb/dwc3/core.c12
-rw-r--r--drivers/usb/dwc3/core.h20
-rw-r--r--include/configs/omap3_beagle.h2
-rw-r--r--tools/env/fw_env.c20
13 files changed, 310 insertions, 55 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 8d588b7d64..438fb225ab 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -883,6 +883,8 @@ M: Marek Vasut <marex@denx.de>
S: Maintained
T: git https://gitlab.denx.de/u-boot/custodians/u-boot-usb.git
F: drivers/usb/
+F: common/usb.c
+F: common/usb_kbd.c
USB xHCI
M: Bin Meng <bmeng.cn@gmail.com>
diff --git a/board/davinci/da8xxevm/MAINTAINERS b/board/davinci/da8xxevm/MAINTAINERS
index 42324a3f73..16f1032661 100644
--- a/board/davinci/da8xxevm/MAINTAINERS
+++ b/board/davinci/da8xxevm/MAINTAINERS
@@ -8,7 +8,7 @@ F: configs/da850evm_nand_defconfig
F: configs/da850evm_direct_nor_defconfig
OMAPL138_LCDK BOARD
-M: Peter Howard <phoward@gme.net.au>
+M: Lokesh Vutla <lokeshvutla@ti.com>
S: Maintained
F: include/configs/omap1l38_lcdk.h
F: configs/omapl138_lcdk_defconfig
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 5a8c084255..eb49a6c11c 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -546,6 +546,9 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
(long long)instr->len);
+ if (!instr->len)
+ return 0;
+
div_u64_rem(instr->len, mtd->erasesize, &rem);
if (rem)
return -EINVAL;
@@ -1226,6 +1229,9 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+ if (!len)
+ return 0;
+
for (i = 0; i < len; ) {
ssize_t written;
loff_t addr = to + i;
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index d3b84574ac..973b6f86c9 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -108,6 +108,11 @@ const struct flash_info spi_nor_ids[] = {
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
{
+ INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ {
INFO("gd25lq128", 0xc86018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
diff --git a/drivers/net/bcm-sf2-eth.c b/drivers/net/bcm-sf2-eth.c
index 615037f1a3..11f937032f 100644
--- a/drivers/net/bcm-sf2-eth.c
+++ b/drivers/net/bcm-sf2-eth.c
@@ -50,7 +50,7 @@ static int bcm_sf2_eth_init(struct eth_device *dev)
eth->port_num = 0;
debug("Connecting PHY 0...\n");
phydev = phy_connect(miiphy_get_dev_by_name(dev->name),
- 0, dev, eth->phy_interface);
+ -1, dev, eth->phy_interface);
if (phydev != NULL) {
eth->port[0] = phydev;
eth->port_num += 1;
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index da5b696c9d..4632111635 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -1045,7 +1045,7 @@ static int eqos_start(struct udevice *dev)
* don't need to reconnect/reconfigure again
*/
if (!eqos->phy) {
- eqos->phy = phy_connect(eqos->mii, 0, dev,
+ eqos->phy = phy_connect(eqos->mii, -1, dev,
eqos->config->interface(dev));
if (!eqos->phy) {
pr_err("phy_connect() failed");
diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c
index e7e78e3c56..0c59552bb8 100644
--- a/drivers/phy/ti-pipe3-phy.c
+++ b/drivers/phy/ti-pipe3-phy.c
@@ -41,27 +41,110 @@
#define SATA_PLL_SOFT_RESET (1<<18)
/* PHY POWER CONTROL Register */
-#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
-#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
-
-#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
-#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
-
-#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
-#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
-
+#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14)
+#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
+
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22)
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
+
+#define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
+#define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
+
+/* PHY RX Registers */
+#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C
+#define INTERFACE_MASK GENMASK(31, 27)
+#define INTERFACE_SHIFT 27
+#define INTERFACE_MODE_USBSS BIT(4)
+#define INTERFACE_MODE_SATA_1P5 BIT(3)
+#define INTERFACE_MODE_SATA_3P0 BIT(2)
+#define INTERFACE_MODE_PCIE BIT(0)
+
+#define LOSD_MASK GENMASK(17, 14)
+#define LOSD_SHIFT 14
+#define MEM_PLLDIV GENMASK(6, 5)
+
+#define PIPE3_PHY_RX_TRIM 0x0000001C
+#define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30)
+#define MEM_DLL_TRIM_SHIFT 30
+
+#define PIPE3_PHY_RX_DLL 0x00000024
+#define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30)
+#define MEM_DLL_PHINT_RATE_SHIFT 30
+
+#define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028
+#define MEM_HS_RATE_MASK GENMASK(28, 27)
+#define MEM_HS_RATE_SHIFT 27
+#define MEM_OVRD_HS_RATE BIT(26)
+#define MEM_OVRD_HS_RATE_SHIFT 26
+#define MEM_CDR_FASTLOCK BIT(23)
+#define MEM_CDR_FASTLOCK_SHIFT 23
+#define MEM_CDR_LBW_MASK GENMASK(22, 21)
+#define MEM_CDR_LBW_SHIFT 21
+#define MEM_CDR_STEPCNT_MASK GENMASK(20, 19)
+#define MEM_CDR_STEPCNT_SHIFT 19
+#define MEM_CDR_STL_MASK GENMASK(18, 16)
+#define MEM_CDR_STL_SHIFT 16
+#define MEM_CDR_THR_MASK GENMASK(15, 13)
+#define MEM_CDR_THR_SHIFT 13
+#define MEM_CDR_THR_MODE BIT(12)
+#define MEM_CDR_THR_MODE_SHIFT 12
+#define MEM_CDR_2NDO_SDM_MODE BIT(11)
+#define MEM_CDR_2NDO_SDM_MODE_SHIFT 11
+
+#define PIPE3_PHY_RX_EQUALIZER 0x00000038
+#define MEM_EQLEV_MASK GENMASK(31, 16)
+#define MEM_EQLEV_SHIFT 16
+#define MEM_EQFTC_MASK GENMASK(15, 11)
+#define MEM_EQFTC_SHIFT 11
+#define MEM_EQCTL_MASK GENMASK(10, 7)
+#define MEM_EQCTL_SHIFT 7
+#define MEM_OVRD_EQLEV BIT(2)
+#define MEM_OVRD_EQLEV_SHIFT 2
+#define MEM_OVRD_EQFTC BIT(1)
+#define MEM_OVRD_EQFTC_SHIFT 1
+
+#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44
+#define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9)
+#define MEM_CDR_LOS_SOURCE_SHIFT 9
#define PLL_IDLE_TIME 100 /* in milliseconds */
#define PLL_LOCK_TIME 100 /* in milliseconds */
+enum pipe3_mode { PIPE3_MODE_PCIE = 1,
+ PIPE3_MODE_SATA,
+ PIPE3_MODE_USBSS };
+
+struct pipe3_settings {
+ u8 ana_interface;
+ u8 ana_losd;
+ u8 dig_fastlock;
+ u8 dig_lbw;
+ u8 dig_stepcnt;
+ u8 dig_stl;
+ u8 dig_thr;
+ u8 dig_thr_mode;
+ u8 dig_2ndo_sdm_mode;
+ u8 dig_hs_rate;
+ u8 dig_ovrd_hs_rate;
+ u8 dll_trim_sel;
+ u8 dll_phint_rate;
+ u8 eq_lev;
+ u8 eq_ftc;
+ u8 eq_ctl;
+ u8 eq_ovrd_lev;
+ u8 eq_ovrd_ftc;
+};
+
struct omap_pipe3 {
void __iomem *pll_ctrl_base;
+ void __iomem *phy_rx;
void __iomem *power_reg;
void __iomem *pll_reset_reg;
struct pipe3_dpll_map *dpll_map;
+ enum pipe3_mode mode;
+ struct pipe3_settings settings;
};
-
struct pipe3_dpll_params {
u16 m;
u8 n;
@@ -75,6 +158,12 @@ struct pipe3_dpll_map {
struct pipe3_dpll_params params;
};
+struct pipe3_data {
+ enum pipe3_mode mode;
+ struct pipe3_dpll_map *dpll_map;
+ struct pipe3_settings settings;
+};
+
static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
{
return readl(addr + offset);
@@ -175,19 +264,75 @@ static void omap_control_pipe3_power(struct omap_pipe3 *pipe3, int on)
rate = rate/1000000;
if (on) {
- val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
- OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
- val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
- OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
- val |= rate <<
- OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ val &= ~(PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+ val |= rate << PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ writel(val, pipe3->power_reg);
+
+ /* Power up TX before RX for SATA & USB */
+ val |= PIPE3_PHY_TX_POWERON;
+ writel(val, pipe3->power_reg);
+
+ val |= PIPE3_PHY_RX_POWERON;
+ writel(val, pipe3->power_reg);
} else {
- val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
- val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
- OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val &= ~PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ writel(val, pipe3->power_reg);
}
+}
- writel(val, pipe3->power_reg);
+static void ti_pipe3_calibrate(struct omap_pipe3 *phy)
+{
+ u32 val;
+ struct pipe3_settings *s = &phy->settings;
+
+ val = omap_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
+ val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
+ val = (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
+ omap_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
+
+ val = omap_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
+ val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
+ MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
+ MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
+ val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
+ s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
+ s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
+ s->dig_lbw << MEM_CDR_LBW_SHIFT |
+ s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
+ s->dig_stl << MEM_CDR_STL_SHIFT |
+ s->dig_thr << MEM_CDR_THR_SHIFT |
+ s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
+ s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
+ omap_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
+
+ val = omap_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
+ val &= ~MEM_DLL_TRIM_SEL_MASK;
+ val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
+ omap_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
+
+ val = omap_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
+ val &= ~MEM_DLL_PHINT_RATE_MASK;
+ val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
+ omap_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
+
+ val = omap_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
+ val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
+ MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
+ val |= s->eq_lev << MEM_EQLEV_SHIFT |
+ s->eq_ftc << MEM_EQFTC_SHIFT |
+ s->eq_ctl << MEM_EQCTL_SHIFT |
+ s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
+ s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
+ omap_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
+
+ if (phy->mode == PIPE3_MODE_SATA) {
+ val = omap_pipe3_readl(phy->phy_rx,
+ SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
+ val &= ~MEM_CDR_LOS_SOURCE_MASK;
+ omap_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
+ val);
+ }
}
static int pipe3_init(struct phy *phy)
@@ -202,6 +347,8 @@ static int pipe3_init(struct phy *phy)
ret = omap_pipe3_dpll_program(pipe3);
if (ret)
return ret;
+
+ ti_pipe3_calibrate(pipe3);
} else {
/* else just bring it out of IDLE mode */
val = omap_pipe3_readl(pipe3->pll_ctrl_base,
@@ -317,7 +464,22 @@ static int pipe3_phy_probe(struct udevice *dev)
fdt_addr_t addr;
fdt_size_t sz;
struct omap_pipe3 *pipe3 = dev_get_priv(dev);
+ struct pipe3_data *data;
+ /* PHY_RX */
+ addr = devfdt_get_addr_size_index(dev, 0, &sz);
+ if (addr == FDT_ADDR_T_NONE) {
+ pr_err("missing phy_rx address\n");
+ return -EINVAL;
+ }
+
+ pipe3->phy_rx = map_physmem(addr, sz, MAP_NOCACHE);
+ if (!pipe3->phy_rx) {
+ pr_err("unable to remap phy_rx\n");
+ return -EINVAL;
+ }
+
+ /* PLLCTRL */
addr = devfdt_get_addr_size_index(dev, 2, &sz);
if (addr == FDT_ADDR_T_NONE) {
pr_err("missing pll ctrl address\n");
@@ -334,25 +496,28 @@ static int pipe3_phy_probe(struct udevice *dev)
if (!pipe3->power_reg)
return -EINVAL;
- if (device_is_compatible(dev, "ti,phy-pipe3-sata")) {
+ data = (struct pipe3_data *)dev_get_driver_data(dev);
+ pipe3->mode = data->mode;
+ pipe3->dpll_map = data->dpll_map;
+ pipe3->settings = data->settings;
+
+ if (pipe3->mode == PIPE3_MODE_SATA) {
pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
if (!pipe3->pll_reset_reg)
return -EINVAL;
}
- pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev);
-
return 0;
}
static struct pipe3_dpll_map dpll_map_sata[] = {
- {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
- {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
- {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
- {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
- {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
- {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
- { }, /* Terminator */
+ {12000000, {625, 4, 4, 6, 0} }, /* 12 MHz */
+ {16800000, {625, 6, 4, 7, 0} }, /* 16.8 MHz */
+ {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
+ {20000000, {750, 9, 4, 6, 0} }, /* 20 MHz */
+ {26000000, {750, 12, 4, 6, 0} }, /* 26 MHz */
+ {38400000, {625, 15, 4, 6, 0} }, /* 38.4 MHz */
+ { }, /* Terminator */
};
static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -365,9 +530,61 @@ static struct pipe3_dpll_map dpll_map_usb[] = {
{ }, /* Terminator */
};
+static struct pipe3_data data_usb = {
+ .mode = PIPE3_MODE_USBSS,
+ .dpll_map = dpll_map_usb,
+ .settings = {
+ /* DRA75x TRM Table 26-17. Preferred USB3_PHY_RX SCP Register Settings */
+ .ana_interface = INTERFACE_MODE_USBSS,
+ .ana_losd = 0xa,
+ .dig_fastlock = 1,
+ .dig_lbw = 3,
+ .dig_stepcnt = 0,
+ .dig_stl = 0x3,
+ .dig_thr = 1,
+ .dig_thr_mode = 1,
+ .dig_2ndo_sdm_mode = 0,
+ .dig_hs_rate = 0,
+ .dig_ovrd_hs_rate = 1,
+ .dll_trim_sel = 0x2,
+ .dll_phint_rate = 0x3,
+ .eq_lev = 0,
+ .eq_ftc = 0,
+ .eq_ctl = 0x9,
+ .eq_ovrd_lev = 0,
+ .eq_ovrd_ftc = 0,
+ },
+};
+
+static struct pipe3_data data_sata = {
+ .mode = PIPE3_MODE_SATA,
+ .dpll_map = dpll_map_sata,
+ .settings = {
+ /* DRA75x TRM Table 26-9. Preferred SATA_PHY_RX SCP Register Settings */
+ .ana_interface = INTERFACE_MODE_SATA_3P0,
+ .ana_losd = 0x5,
+ .dig_fastlock = 1,
+ .dig_lbw = 3,
+ .dig_stepcnt = 0,
+ .dig_stl = 0x3,
+ .dig_thr = 1,
+ .dig_thr_mode = 1,
+ .dig_2ndo_sdm_mode = 0,
+ .dig_hs_rate = 0, /* Not in TRM preferred settings */
+ .dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */
+ .dll_trim_sel = 0x1,
+ .dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */
+ .eq_lev = 0,
+ .eq_ftc = 0x1f,
+ .eq_ctl = 0,
+ .eq_ovrd_lev = 1,
+ .eq_ovrd_ftc = 1,
+ },
+};
+
static const struct udevice_id pipe3_phy_ids[] = {
- { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata },
- { .compatible = "ti,omap-usb3", .data = (ulong)&dpll_map_usb},
+ { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&data_sata },
+ { .compatible = "ti,omap-usb3", .data = (ulong)&data_usb},
{ }
};
diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c
index c04535ac44..95eeb8307a 100644
--- a/drivers/spi/rk_spi.c
+++ b/drivers/spi/rk_spi.c
@@ -27,6 +27,12 @@
/* Change to 1 to output registers at the start of each transaction */
#define DEBUG_RK_SPI 0
+/*
+ * ctrlr1 is 16-bits, so we should support lengths of 0xffff + 1. However,
+ * the controller seems to hang when given 0x10000, so stick with this for now.
+ */
+#define ROCKCHIP_SPI_MAX_TRANLEN 0xffff
+
struct rockchip_spi_params {
/* RXFIFO overruns and TXFIFO underruns stop the master clock */
bool master_manages_fifo;
@@ -367,7 +373,7 @@ static inline int rockchip_spi_16bit_reader(struct udevice *dev,
* represented in CTRLR1.
*/
if (data && data->master_manages_fifo)
- max_chunk_size = 0x10000;
+ max_chunk_size = ROCKCHIP_SPI_MAX_TRANLEN;
// rockchip_spi_configure(dev, mode, size)
rkspi_enable_chip(regs, false);
@@ -451,7 +457,7 @@ static int rockchip_spi_xfer(struct udevice *dev, unsigned int bitlen,
/* This is the original 8bit reader/writer code */
while (len > 0) {
- int todo = min(len, 0x10000);
+ int todo = min(len, ROCKCHIP_SPI_MAX_TRANLEN);
rkspi_enable_chip(regs, false);
writel(todo - 1, &regs->ctrlr1);
diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
index 1903f61103..0b6d9cf727 100644
--- a/drivers/usb/cdns3/ep0.c
+++ b/drivers/usb/cdns3/ep0.c
@@ -10,6 +10,7 @@
* Peter Chen <peter.chen@nxp.com>
*/
+#include <cpu_func.h>
#include <linux/usb/composite.h>
#include <linux/iopoll.h>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 0f9a632816..77c555e769 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -622,15 +622,19 @@ static void dwc3_uboot_hsphy_mode(struct dwc3_device *dwc3_dev,
/* Set dwc3 usb2 phy config */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_PHYIF;
- reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
switch (hsphy_mode) {
case USBPHY_INTERFACE_MODE_UTMI:
- reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT;
+ reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+ DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+ reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
+ DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
break;
case USBPHY_INTERFACE_MODE_UTMIW:
- reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
+ reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+ DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+ reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
+ DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
break;
default:
break;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index bff53e072b..1c08a2c5b6 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -162,18 +162,14 @@
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
-#define DWC3_GUSB2PHYCFG_PHYIF BIT(3)
-
-/* Global USB2 PHY Configuration Mask */
-#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK (0xf << 10)
-
-/* Global USB2 PHY Configuration Offset */
-#define DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET 10
-
-#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \
- DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET)
-#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \
- DWC3_GUSB2PHYCFG_USBTRDTIM_OFFSET)
+#define DWC3_GUSB2PHYCFG_PHYIF(n) ((n) << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) ((n) << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define USBTRDTIM_UTMI_8_BIT 9
+#define USBTRDTIM_UTMI_16_BIT 5
+#define UTMI_PHYIF_16_BIT 1
+#define UTMI_PHYIF_8_BIT 0
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 4157d7614f..bc8aa7adf5 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -37,7 +37,7 @@
10, 11, 12, 13}
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 3
-#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K
#define CONFIG_ENV_OVERWRITE
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 30b5a190ab..381739d28d 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -112,6 +112,7 @@ struct environment {
unsigned char *flags;
char *data;
enum flag_scheme flag_scheme;
+ int dirty;
};
static struct environment environment = {
@@ -506,6 +507,9 @@ int fw_env_flush(struct env_opts *opts)
if (!opts)
opts = &default_opts;
+ if (!environment.dirty)
+ return 0;
+
/*
* Update CRC
*/
@@ -551,7 +555,8 @@ int fw_env_write(char *name, char *value)
deleting = (oldval && !(value && strlen(value)));
creating = (!oldval && (value && strlen(value)));
- overwriting = (oldval && (value && strlen(value)));
+ overwriting = (oldval && (value && strlen(value) &&
+ strcmp(oldval, value)));
/* check for permission */
if (deleting) {
@@ -591,6 +596,7 @@ int fw_env_write(char *name, char *value)
/* Nothing to do */
return 0;
+ environment.dirty = 1;
if (deleting || overwriting) {
if (*++nxt == '\0') {
*env = '\0';
@@ -1440,6 +1446,7 @@ int fw_env_open(struct env_opts *opts)
"Warning: Bad CRC, using default environment\n");
memcpy(environment.data, default_environment,
sizeof(default_environment));
+ environment.dirty = 1;
}
} else {
flag0 = *environment.flags;
@@ -1493,6 +1500,16 @@ int fw_env_open(struct env_opts *opts)
crc1_ok = (crc1 == redundant->crc);
flag1 = redundant->flags;
+ /*
+ * environment.data still points to ((struct
+ * env_image_redundant *)addr0)->data. If the two
+ * environments differ, or one has bad crc, force a
+ * write-out by marking the environment dirty.
+ */
+ if (memcmp(environment.data, redundant->data, ENV_SIZE) ||
+ !crc0_ok || !crc1_ok)
+ environment.dirty = 1;
+
if (crc0_ok && !crc1_ok) {
dev_current = 0;
} else if (!crc0_ok && crc1_ok) {
@@ -1502,6 +1519,7 @@ int fw_env_open(struct env_opts *opts)
"Warning: Bad CRC, using default environment\n");
memcpy(environment.data, default_environment,
sizeof(default_environment));
+ environment.dirty = 1;
dev_current = 0;
} else {
switch (environment.flag_scheme) {
generated by cgit (git 2.34.1) at 2024-12-28 03:43:11 +0000