77 files changed, 1849 insertions, 204 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 0948baba6a..e5ad0cfb5b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -555,7 +555,7 @@ Stefano Babic <sbabic@denx.de>
 
 Dirk Behme <dirk.behme@gmail.com>
 
-	omap3_beagle	ARM CORTEX-A8 (OMAP3530 SoC)
+	omap3_beagle	ARM ARMV7 (OMAP3530 SoC)
 
 Eric Benard <eric@eukrea.com>
 
@@ -621,11 +621,11 @@ Kshitij Gupta <kshitij@ti.com>
 
 Vaibhav Hiremath <hvaibhav@ti.com>
 
-	am3517_evm	ARM CORTEX-A8 (AM35x SoC)
+	am3517_evm	ARM ARMV7 (AM35x SoC)
 
 Grazvydas Ignotas <notasas@gmail.com>
 
-	omap3_pandora	ARM CORTEX-A8 (OMAP3xx SoC)
+	omap3_pandora	ARM ARMV7 (OMAP3xx SoC)
 
 Gary Jennejohn <garyj@denx.de>
 
@@ -655,12 +655,12 @@ Nishant Kamat <nskamat@ti.com>
 
 Minkyu Kang <mk7.kang@samsung.com>
 
-	s5p_goni	ARM CORTEX-A8 (S5PC110 SoC)
-	SMDKC100	ARM CORTEX-A8 (S5PC100 SoC)
+	s5p_goni	ARM ARMV7 (S5PC110 SoC)
+	SMDKC100	ARM ARMV7 (S5PC100 SoC)
 
 Frederik Kriewitz <frederik@kriewitz.eu>
 
-	devkit8000	ARM CORTEX-A8 (OMAP3530 SoC)
+	devkit8000	ARM ARMV7 (OMAP3530 SoC)
 
 Sergey Kubushyn <ksi@koi8.net>
 
@@ -685,8 +685,8 @@ Sergey Lapin <slapin@ossfans.org>
 
 Nishanth Menon <nm@ti.com>
 
-	omap3_sdp3430	ARM CORTEX-A8 (OMAP3xx SoC)
-	omap3_zoom1	ARM CORTEX-A8 (OMAP3xx SoC)
+	omap3_sdp3430	ARM ARMV7 (OMAP3xx SoC)
+	omap3_zoom1	ARM ARMV7 (OMAP3xx SoC)
 
 David Müller <d.mueller@elsoft.ch>
 
@@ -724,7 +724,7 @@ Dave Peverley <dpeverley@mpc-data.co.uk>
 
 Manikandan Pillai <mani.pillai@ti.com>
 
-	omap3_evm	ARM CORTEX-A8 (OMAP3xx SoC)
+	omap3_evm	ARM ARMV7 (OMAP3xx SoC)
 
 Stelian Pop <stelian.pop@leadtechdesign.com>
 
@@ -736,7 +736,7 @@ Stelian Pop <stelian.pop@leadtechdesign.com>
 
 Tom Rix <Tom.Rix@windriver.com>
 
-	omap3_zoom2	ARM CORTEX-A8 (OMAP3xx SoC)
+	omap3_zoom2	ARM ARMV7 (OMAP3xx SoC)
 
 John Rigby <jcrigby@gmail.com>
 
@@ -755,7 +755,9 @@ Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
 
 Steve Sakoman <sakoman@gmail.com>
 
-	omap3_overo	ARM CORTEX-A8 (OMAP3xx SoC)
+	omap3_overo	ARM ARMV7 (OMAP3xx SoC)
+	omap4_panda	ARM ARMV7 (OMAP4xx SoC)
+	omap4_sdp4430	ARM ARMV7 (OMAP4xx SoC)
 
 Jens Scharsig <esw@bus-elektronik.de>
 
diff --git a/MAKEALL b/MAKEALL
index 72fcecff1c..39b13e9c08 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -646,9 +646,9 @@ LIST_ARM11="			\
 "
 
 #########################################################################
-## ARM Cortex-A8 Systems
+## ARMV7 Systems
 #########################################################################
-LIST_ARM_CORTEX_A8="		\
+LIST_ARMV7="		\
 	am3517_evm		\
 	devkit8000		\
 	mx51evk			\
@@ -659,6 +659,8 @@ LIST_ARM_CORTEX_A8="		\
 	omap3_sdp3430		\
 	omap3_zoom1		\
 	omap3_zoom2		\
+	omap4_panda		\
+	omap4_sdp4430		\
 	s5p_goni		\
 	smdkc100		\
 "
@@ -741,7 +743,7 @@ LIST_arm="			\
 	${LIST_ARM9}		\
 	${LIST_ARM10}		\
 	${LIST_ARM11}		\
-	${LIST_ARM_CORTEX_A8}	\
+	${LIST_ARMV7}	\
 	${LIST_at91}		\
 	${LIST_pxa}		\
 	${LIST_ixp}		\
@@ -1005,7 +1007,7 @@ print_stats() {
 for arg in $@
 do
 	case "$arg" in
-	arm|SA|ARM7|ARM9|ARM10|ARM11|ARM_CORTEX_A8|at91|ixp|pxa \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|ARMV7|at91|ixp|pxa \
 	|avr32 \
 	|blackfin \
 	|coldfire \
diff --git a/Makefile b/Makefile
index 9c4e3a4480..bba41cb125 100644
--- a/Makefile
+++ b/Makefile
@@ -245,6 +245,13 @@ LIBS += lib/libfdt/libfdt.a
 LIBS += api/libapi.a
 LIBS += post/libpost.a
 
+ifeq ($(SOC),omap3)
+LIBS += $(CPUDIR)/omap-common/libomap-common.a
+endif
+ifeq ($(SOC),omap4)
+LIBS += $(CPUDIR)/omap-common/libomap-common.a
+endif
+
 LIBS := $(addprefix $(obj),$(LIBS))
 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 
diff --git a/arch/arm/cpu/arm_cortexa8/Makefile b/arch/arm/cpu/armv7/Makefile
index ae20299db7..ae20299db7 100644
--- a/arch/arm/cpu/arm_cortexa8/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
diff --git a/arch/arm/cpu/arm_cortexa8/config.mk b/arch/arm/cpu/armv7/config.mk
index 49ac9c74ae..49ac9c74ae 100644
--- a/arch/arm/cpu/arm_cortexa8/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
diff --git a/arch/arm/cpu/arm_cortexa8/cpu.c b/arch/arm/cpu/armv7/cpu.c
index a01e0d605f..a01e0d605f 100644
--- a/arch/arm/cpu/arm_cortexa8/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/Makefile b/arch/arm/cpu/armv7/mx51/Makefile
index 7cfaa2c130..7cfaa2c130 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/Makefile
+++ b/arch/arm/cpu/armv7/mx51/Makefile
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/clock.c b/arch/arm/cpu/armv7/mx51/clock.c
index a27227de31..a27227de31 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/clock.c
+++ b/arch/arm/cpu/armv7/mx51/clock.c
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/iomux.c b/arch/arm/cpu/armv7/mx51/iomux.c
index 62b2954be9..62b2954be9 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/iomux.c
+++ b/arch/arm/cpu/armv7/mx51/iomux.c
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S b/arch/arm/cpu/armv7/mx51/lowlevel_init.S
index 783c81f72a..783c81f72a 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx51/lowlevel_init.S
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/soc.c b/arch/arm/cpu/armv7/mx51/soc.c
index f22ebe96c8..f22ebe96c8 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/soc.c
+++ b/arch/arm/cpu/armv7/mx51/soc.c
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/speed.c b/arch/arm/cpu/armv7/mx51/speed.c
index a444def7eb..a444def7eb 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/speed.c
+++ b/arch/arm/cpu/armv7/mx51/speed.c
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/timer.c b/arch/arm/cpu/armv7/mx51/timer.c
index 81c4a06143..81c4a06143 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/timer.c
+++ b/arch/arm/cpu/armv7/mx51/timer.c
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds b/arch/arm/cpu/armv7/mx51/u-boot.lds
index 2953b93632..d66434c95d 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/u-boot.lds
+++ b/arch/arm/cpu/armv7/mx51/u-boot.lds
@@ -36,7 +36,7 @@ SECTIONS
 	. = ALIGN(4);
 	.text	   :
 	{
-	  arch/arm/cpu/arm_cortexa8/start.o
+	  arch/arm/cpu/armv7/start.o
 	  *(.text)
 	}
 
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
new file mode 100644
index 0000000000..3a4a304e45
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)libomap-common.a
+
+SOBJS	:= reset.o
+COBJS	:= timer.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap-common/config.mk b/arch/arm/cpu/armv7/omap-common/config.mk
new file mode 100644
index 0000000000..49ac9c74ae
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v7a.
+PLATFORM_CPPFLAGS += -march=armv5
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\
+		    $(call cc-option,-malignment-traps,))
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/reset.S b/arch/arm/cpu/armv7/omap-common/reset.S
index a53c408195..a53c408195 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/reset.S
+++ b/arch/arm/cpu/armv7/omap-common/reset.S
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 401bfe6d09..69e285ff1d 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -84,6 +84,11 @@ void set_timer(ulong t)
 /* delay x useconds */
 void __udelay(unsigned long usec)
 {
+#if defined(CONFIG_OMAP44XX)
+	/* TODO temporary hack until OMAP4 clock setup routines are present */
+	if (usec > 1000)
+		usec = usec/1000;
+#endif
 	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
 	unsigned long now, last = readl(&timer_base->tcrr);
 
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index 7d63c6beca..79ae26706e 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -27,7 +27,6 @@ LIB	=  $(obj)lib$(SOC).a
 
 SOBJS	:= lowlevel_init.o
 SOBJS	+= cache.o
-SOBJS	+= reset.o
 
 COBJS	+= board.o
 COBJS	+= clock.o
@@ -35,7 +34,6 @@ COBJS	+= gpio.o
 COBJS	+= mem.o
 COBJS	+= syslib.o
 COBJS	+= sys_info.o
-COBJS	+= timer.o
 
 COBJS-$(CONFIG_EMIF4)	+= emif4.o
 COBJS-$(CONFIG_SDRC)	+= sdrc.o
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 69e56f55c5..69e56f55c5 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S
index 4b65ac58a5..4b65ac58a5 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/cache.S
+++ b/arch/arm/cpu/armv7/omap3/cache.S
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 6330c9e5da..6330c9e5da 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c
index fae5b1161b..fae5b1161b 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/emif4.c
+++ b/arch/arm/cpu/armv7/omap3/emif4.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/gpio.c b/arch/arm/cpu/armv7/omap3/gpio.c
index aeb6066d89..aeb6066d89 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/gpio.c
+++ b/arch/arm/cpu/armv7/omap3/gpio.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 73063ec8e6..73063ec8e6 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
index bd914b0ee5..bd914b0ee5 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/mem.c
+++ b/arch/arm/cpu/armv7/omap3/mem.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
index 96fd990c71..96fd990c71 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/sdrc.c
+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index 1df4401d49..1df4401d49 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
diff --git a/arch/arm/cpu/arm_cortexa8/omap3/syslib.c b/arch/arm/cpu/armv7/omap3/syslib.c
index 9ced495c8d..9ced495c8d 100644
--- a/arch/arm/cpu/arm_cortexa8/omap3/syslib.c
+++ b/arch/arm/cpu/armv7/omap3/syslib.c
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
new file mode 100644
index 0000000000..ecf64f999b
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	=  $(obj)lib$(SOC).a
+
+SOBJS	+= lowlevel_init.o
+
+COBJS	+= board.o
+COBJS	+= sys_info.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all:	 $(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
new file mode 100644
index 0000000000..5bf717303d
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -0,0 +1,90 @@
+/*
+ *
+ * Common functions for OMAP4 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ *              - Called path is with SRAM stack.
+ */
+void s_init(void)
+{
+	watchdog_init();
+}
+
+/*
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ */
+void wait_for_command_complete(struct watchdog *wd_base)
+{
+	int pending = 1;
+	do {
+		pending = readl(&wd_base->wwps);
+	} while (pending);
+}
+
+/*
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ */
+void watchdog_init(void)
+{
+	struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
+
+	writel(WD_UNLOCK1, &wd2_base->wspr);
+	wait_for_command_complete(wd2_base);
+	writel(WD_UNLOCK2, &wd2_base->wspr);
+}
+
+/*
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = 0x80000000;
+	gd->bd->bi_dram[0].size = 512 << 20;
+	return 0;
+}
+
+/*
+ * Print board information
+ */
+int checkboard(void)
+{
+	puts(sysinfo.board_string);
+	return 0;
+}
+
diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
new file mode 100644
index 0000000000..9a181eba9c
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
@@ -0,0 +1,48 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/omap4.h>
+
+.globl lowlevel_init
+lowlevel_init:
+	/*
+	 * Setup a temporary stack
+	 */
+	ldr	sp, =LOW_LEVEL_SRAM_STACK
+
+	/*
+	 * Save the old lr(passed in ip) and the current lr to stack
+	 */
+	push	{ip, lr}
+
+	/*
+	 * go setup pll, mux, memory
+	 */
+	bl	s_init
+	pop	{ip, pc}
+
diff --git a/arch/arm/cpu/armv7/omap4/sys_info.c b/arch/arm/cpu/armv7/omap4/sys_info.c
new file mode 100644
index 0000000000..3b73191831
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/sys_info.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ *  get_device_type(): tell if GP/HS/EMU/TST
+ */
+u32 get_device_type(void)
+{
+	return 0;
+}
+
+/*
+ * get_board_rev() - get board revision
+ */
+u32 get_board_rev(void)
+{
+	return 0x20;
+}
+
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+
+	puts("CPU  : OMAP4430\n");
+
+	return 0;
+}
+
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile b/arch/arm/cpu/armv7/s5pc1xx/Makefile
index 3785593d25..3785593d25 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile
+++ b/arch/arm/cpu/armv7/s5pc1xx/Makefile
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S
index 906118d820..7734b328d7 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cache.S
+++ b/arch/arm/cpu/armv7/s5pc1xx/cache.S
@@ -2,7 +2,7 @@
  * Copyright (C) 2009 Samsung Electronics
  * Minkyu Kang <mk7.kang@samsung.com>
  *
- * based on arch/arm/cpu/arm_cortexa8/omap3/cache.S
+ * based on arch/arm/cpu/armv7/omap3/cache.S
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c b/arch/arm/cpu/armv7/s5pc1xx/clock.c
index 19619f92cd..19619f92cd 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/clock.c
+++ b/arch/arm/cpu/armv7/s5pc1xx/clock.c
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c b/arch/arm/cpu/armv7/s5pc1xx/cpu_info.c
index f16c0ff130..f16c0ff130 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/cpu_info.c
+++ b/arch/arm/cpu/armv7/s5pc1xx/cpu_info.c
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S b/arch/arm/cpu/armv7/s5pc1xx/reset.S
index 7f6ff9c35f..7f6ff9c35f 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/reset.S
+++ b/arch/arm/cpu/armv7/s5pc1xx/reset.S
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c b/arch/arm/cpu/armv7/s5pc1xx/sromc.c
index 380be81be5..380be81be5 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/sromc.c
+++ b/arch/arm/cpu/armv7/s5pc1xx/sromc.c
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c b/arch/arm/cpu/armv7/s5pc1xx/timer.c
index c5df5c5ab5..c5df5c5ab5 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/timer.c
+++ b/arch/arm/cpu/armv7/s5pc1xx/timer.c
diff --git a/arch/arm/cpu/arm_cortexa8/start.S b/arch/arm/cpu/armv7/start.S
index 1e0a1504bf..1e0a1504bf 100644
--- a/arch/arm/cpu/arm_cortexa8/start.S
+++ b/arch/arm/cpu/armv7/start.S
diff --git a/arch/arm/cpu/arm_cortexa8/u-boot.lds b/arch/arm/cpu/armv7/u-boot.lds
index 820e3a1043..9e5b5a97d7 100644
--- a/arch/arm/cpu/arm_cortexa8/u-boot.lds
+++ b/arch/arm/cpu/armv7/u-boot.lds
@@ -34,7 +34,7 @@ SECTIONS
 	. = ALIGN(4);
 	.text	:
 	{
-		arch/arm/cpu/arm_cortexa8/start.o	(.text)
+		arch/arm/cpu/armv7/start.o	(.text)
 		*(.text)
 	}
 
diff --git a/arch/arm/include/asm/arch-mx51/asm-offsets.h b/arch/arm/include/asm/arch-mx51/asm-offsets.h
index fbba412aab..afd27283af 100644
--- a/arch/arm/include/asm/arch-mx51/asm-offsets.h
+++ b/arch/arm/include/asm/arch-mx51/asm-offsets.h
@@ -1,5 +1,5 @@
 /*
- * needed for arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S
+ * needed for arch/arm/cpu/armv7/mx51/lowlevel_init.S
  *
  * These should be auto-generated
  */
diff --git a/arch/arm/include/asm/arch-omap3/i2c.h b/arch/arm/include/asm/arch-omap3/i2c.h
index 490e03bb65..7a4a73aa91 100644
--- a/arch/arm/include/asm/arch-omap3/i2c.h
+++ b/arch/arm/include/asm/arch-omap3/i2c.h
@@ -20,9 +20,10 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-#ifndef _I2C_H_
-#define _I2C_H_
+#ifndef _OMAP3_I2C_H_
+#define _OMAP3_I2C_H_
 
+#define I2C_BUS_MAX	3
 #define I2C_DEFAULT_BASE	I2C_BASE1
 
 struct i2c {
@@ -58,146 +59,4 @@ struct i2c {
 	unsigned short res15;
 };
 
-#define I2C_BUS_MAX	3
-
-/* I2C masks */
-
-/* I2C Interrupt Enable Register (I2C_IE): */
-#define I2C_IE_GC_IE	(1 << 5)
-#define I2C_IE_XRDY_IE	(1 << 4) /* Transmit data ready interrupt enable */
-#define I2C_IE_RRDY_IE	(1 << 3) /* Receive data ready interrupt enable */
-#define I2C_IE_ARDY_IE	(1 << 2) /* Register access ready interrupt enable */
-#define I2C_IE_NACK_IE	(1 << 1) /* No acknowledgment interrupt enable */
-#define I2C_IE_AL_IE	(1 << 0) /* Arbitration lost interrupt enable */
-
-/* I2C Status Register (I2C_STAT): */
-
-#define I2C_STAT_SBD	(1 << 15) /* Single byte data */
-#define I2C_STAT_BB	(1 << 12) /* Bus busy */
-#define I2C_STAT_ROVR	(1 << 11) /* Receive overrun */
-#define I2C_STAT_XUDF	(1 << 10) /* Transmit underflow */
-#define I2C_STAT_AAS	(1 << 9)  /* Address as slave */
-#define I2C_STAT_GC	(1 << 5)
-#define I2C_STAT_XRDY	(1 << 4)  /* Transmit data ready */
-#define I2C_STAT_RRDY	(1 << 3)  /* Receive data ready */
-#define I2C_STAT_ARDY	(1 << 2)  /* Register access ready */
-#define I2C_STAT_NACK	(1 << 1)  /* No acknowledgment interrupt enable */
-#define I2C_STAT_AL	(1 << 0)  /* Arbitration lost interrupt enable */
-
-/* I2C Interrupt Code Register (I2C_INTCODE): */
-
-#define I2C_INTCODE_MASK	7
-#define I2C_INTCODE_NONE	0
-#define I2C_INTCODE_AL		1	/* Arbitration lost */
-#define I2C_INTCODE_NAK		2	/* No acknowledgement/general call */
-#define I2C_INTCODE_ARDY	3	/* Register access ready */
-#define I2C_INTCODE_RRDY	4	/* Rcv data ready */
-#define I2C_INTCODE_XRDY	5	/* Xmit data ready */
-
-/* I2C Buffer Configuration Register (I2C_BUF): */
-
-#define I2C_BUF_RDMA_EN		(1 << 15) /* Receive DMA channel enable */
-#define I2C_BUF_XDMA_EN		(1 << 7)  /* Transmit DMA channel enable */
-
-/* I2C Configuration Register (I2C_CON): */
-
-#define I2C_CON_EN	(1 << 15)  /* I2C module enable */
-#define I2C_CON_BE	(1 << 14)  /* Big endian mode */
-#define I2C_CON_STB	(1 << 11)  /* Start byte mode (master mode only) */
-#define I2C_CON_MST	(1 << 10)  /* Master/slave mode */
-#define I2C_CON_TRX	(1 << 9)   /* Transmitter/receiver mode */
-				   /* (master mode only) */
-#define I2C_CON_XA	(1 << 8)   /* Expand address */
-#define I2C_CON_STP	(1 << 1)   /* Stop condition (master mode only) */
-#define I2C_CON_STT	(1 << 0)   /* Start condition (master mode only) */
-
-/* I2C System Test Register (I2C_SYSTEST): */
-
-#define I2C_SYSTEST_ST_EN	(1 << 15) /* System test enable */
-#define I2C_SYSTEST_FREE	(1 << 14) /* Free running mode, on brkpoint) */
-#define I2C_SYSTEST_TMODE_MASK	(3 << 12) /* Test mode select */
-#define I2C_SYSTEST_TMODE_SHIFT	(12)	  /* Test mode select */
-#define I2C_SYSTEST_SCL_I	(1 << 3)  /* SCL line sense input value */
-#define I2C_SYSTEST_SCL_O	(1 << 2)  /* SCL line drive output value */
-#define I2C_SYSTEST_SDA_I	(1 << 1)  /* SDA line sense input value */
-#define I2C_SYSTEST_SDA_O	(1 << 0)  /* SDA line drive output value */
-
-#define I2C_SCLL_SCLL		0
-#define I2C_SCLL_SCLL_M		0xFF
-#define I2C_SCLL_HSSCLL		8
-#define I2C_SCLH_HSSCLL_M	0xFF
-#define I2C_SCLH_SCLH		0
-#define I2C_SCLH_SCLH_M		0xFF
-#define I2C_SCLH_HSSCLH		8
-#define I2C_SCLH_HSSCLH_M	0xFF
-
-#define OMAP_I2C_STANDARD	100000
-#define OMAP_I2C_FAST_MODE	400000
-#define OMAP_I2C_HIGH_SPEED	3400000
-
-#define SYSTEM_CLOCK_12		12000000
-#define SYSTEM_CLOCK_13		13000000
-#define SYSTEM_CLOCK_192	19200000
-#define SYSTEM_CLOCK_96		96000000
-
-/* Use the reference value of 96MHz if not explicitly set by the board */
-#ifndef I2C_IP_CLK
-#define I2C_IP_CLK		SYSTEM_CLOCK_96
-#endif
-
-/*
- * The reference minimum clock for high speed is 19.2MHz.
- * The linux 2.6.30 kernel uses this value.
- * The reference minimum clock for fast mode is 9.6MHz
- * The reference minimum clock for standard mode is 4MHz
- * In TRM, the value of 12MHz is used.
- */
-#ifndef I2C_INTERNAL_SAMPLING_CLK
-#define I2C_INTERNAL_SAMPLING_CLK	19200000
-#endif
-
-/*
- * The equation for the low and high time is
- * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed
- * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed
- *
- * If the duty cycle is 50%
- *
- * tlow = scll + scll_trim = sampling clock / (2 * speed)
- * thigh = sclh + sclh_trim = sampling clock / (2 * speed)
- *
- * In TRM
- * scll_trim = 7
- * sclh_trim = 5
- *
- * The linux 2.6.30 kernel uses
- * scll_trim = 6
- * sclh_trim = 6
- *
- * These are the trim values for standard and fast speed
- */
-#ifndef I2C_FASTSPEED_SCLL_TRIM
-#define I2C_FASTSPEED_SCLL_TRIM		6
-#endif
-#ifndef I2C_FASTSPEED_SCLH_TRIM
-#define I2C_FASTSPEED_SCLH_TRIM		6
-#endif
-
-/* These are the trim values for high speed */
-#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
-#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM	I2C_FASTSPEED_SCLL_TRIM
-#endif
-#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
-#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM	I2C_FASTSPEED_SCLH_TRIM
-#endif
-#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
-#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM	I2C_FASTSPEED_SCLL_TRIM
-#endif
-#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
-#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM	I2C_FASTSPEED_SCLH_TRIM
-#endif
-
-#define I2C_PSC_MAX		0x0f
-#define I2C_PSC_MIN		0x00
-
-#endif /* _I2C_H_ */
+#endif /* _OMAP3_I2C_H_ */
diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
index aa751c9a34..43dd705011 100644
--- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
@@ -29,13 +29,20 @@
 #define T2_BASE			0x48002000
 
 typedef struct t2 {
-	unsigned char res1[0x274];
+	unsigned char res1[0x274];	/* 0x000 */
 	unsigned int devconf0;		/* 0x274 */
-	unsigned char res2[0x2A8];
+	unsigned char res2[0x060];	/* 0x278 */
+	unsigned int devconf1;		/* 0x2D8 */
+	unsigned char res3[0x244];	/* 0x2DC */
 	unsigned int pbias_lite;	/* 0x520 */
 } t2_t;
 
 #define MMCSDIO1ADPCLKISEL		(1 << 24)
+#define MMCSDIO2ADPCLKISEL		(1 << 6)
+
+#define EN_MMC1				(1 << 24)
+#define EN_MMC2				(1 << 25)
+#define EN_MMC3				(1 << 30)
 
 #define PBIASLITEPWRDNZ0		(1 << 1)
 #define PBIASSPEEDCTRL0			(1 << 2)
@@ -44,7 +51,9 @@ typedef struct t2 {
 /*
  * OMAP HSMMC register definitions
  */
-#define OMAP_HSMMC_BASE		0x4809C000
+#define OMAP_HSMMC1_BASE	0x4809C000
+#define OMAP_HSMMC2_BASE	0x480B4000
+#define OMAP_HSMMC3_BASE	0x480AD000
 
 typedef struct hsmmc {
 	unsigned char res1[0x10];
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
new file mode 100644
index 0000000000..7d8aa2092d
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2006-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct gptimer {
+	u32 tidr;		/* 0x00 r */
+	u8 res[0xc];
+	u32 tiocp_cfg;		/* 0x10 rw */
+	u32 tistat;		/* 0x14 r */
+	u32 tisr;		/* 0x18 rw */
+	u32 tier;		/* 0x1c rw */
+	u32 twer;		/* 0x20 rw */
+	u32 tclr;		/* 0x24 rw */
+	u32 tcrr;		/* 0x28 rw */
+	u32 tldr;		/* 0x2c rw */
+	u32 ttgr;		/* 0x30 rw */
+	u32 twpc;		/* 0x34 r */
+	u32 tmar;		/* 0x38 rw */
+	u32 tcar1;		/* 0x3c r */
+	u32 tcicr;		/* 0x40 rw */
+	u32 tcar2;		/* 0x44 r */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN			((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
+
+/* Watchdog */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct watchdog {
+	u8 res1[0x34];
+	u32 wwps;		/* 0x34 r */
+	u8 res2[0x10];
+	u32 wspr;		/* 0x48 rw */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+#define SYSCLKDIV_1		(0x1 << 6)
+#define SYSCLKDIV_2		(0x1 << 7)
+
+#define CLKSEL_GPT1		(0x1 << 0)
+
+#define EN_GPT1			(0x1 << 0)
+#define EN_32KSYNC		(0x1 << 2)
+
+#define ST_WDT2			(0x1 << 5)
+
+#define RESETDONE		(0x1 << 0)
+
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/* I2C base */
+#define I2C_BASE1		(OMAP44XX_L4_PER_BASE + 0x70000)
+#define I2C_BASE2		(OMAP44XX_L4_PER_BASE + 0x72000)
+#define I2C_BASE3		(OMAP44XX_L4_PER_BASE + 0x60000)
+
+#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap4/i2c.h b/arch/arm/include/asm/arch-omap4/i2c.h
new file mode 100644
index 0000000000..a91b4c2f31
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/i2c.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2004-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP4_I2C_H_
+#define _OMAP4_I2C_H_
+
+#define I2C_BUS_MAX	3
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+struct i2c {
+	unsigned short revnb_lo;	/* 0x00 */
+	unsigned short res1;
+	unsigned short revnb_hi;	/* 0x04 */
+	unsigned short res2[13];
+	unsigned short sysc;		/* 0x20 */
+	unsigned short res3;
+	unsigned short irqstatus_raw;	/* 0x24 */
+	unsigned short res4;
+	unsigned short stat;		/* 0x28 */
+	unsigned short res5;
+	unsigned short ie;		/* 0x2C */
+	unsigned short res6;
+	unsigned short irqenable_clr;	/* 0x30 */
+	unsigned short res7;
+	unsigned short iv;		/* 0x34 */
+	unsigned short res8[45];
+	unsigned short syss;		/* 0x90 */
+	unsigned short res9;
+	unsigned short buf;		/* 0x94 */
+	unsigned short res10;
+	unsigned short cnt;		/* 0x98 */
+	unsigned short res11;
+	unsigned short data;		/* 0x9C */
+	unsigned short res13;
+	unsigned short res14;		/* 0xA0 */
+	unsigned short res15;
+	unsigned short con;		/* 0xA4 */
+	unsigned short res16;
+	unsigned short oa;		/* 0xA8 */
+	unsigned short res17;
+	unsigned short sa;		/* 0xAC */
+	unsigned short res18;
+	unsigned short psc;		/* 0xB0 */
+	unsigned short res19;
+	unsigned short scll;		/* 0xB4 */
+	unsigned short res20;
+	unsigned short sclh;		/* 0xB8 */
+	unsigned short res21;
+	unsigned short systest;		/* 0xBC */
+	unsigned short res22;
+	unsigned short bufstat;		/* 0xC0 */
+	unsigned short res23;
+};
+
+#endif /* _OMAP4_I2C_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
new file mode 100644
index 0000000000..e5d8b53b7e
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+/*
+ * OMAP HSMMC register definitions
+ */
+
+#define OMAP_HSMMC1_BASE	0x4809C100
+#define OMAP_HSMMC2_BASE	0x480B4100
+#define OMAP_HSMMC3_BASE	0x480AD100
+
+typedef struct hsmmc {
+	unsigned char res1[0x10];
+	unsigned int sysconfig;		/* 0x10 */
+	unsigned int sysstatus;		/* 0x14 */
+	unsigned char res2[0x14];
+	unsigned int con;		/* 0x2C */
+	unsigned char res3[0xD4];
+	unsigned int blk;		/* 0x104 */
+	unsigned int arg;		/* 0x108 */
+	unsigned int cmd;		/* 0x10C */
+	unsigned int rsp10;		/* 0x110 */
+	unsigned int rsp32;		/* 0x114 */
+	unsigned int rsp54;		/* 0x118 */
+	unsigned int rsp76;		/* 0x11C */
+	unsigned int data;		/* 0x120 */
+	unsigned int pstate;		/* 0x124 */
+	unsigned int hctl;		/* 0x128 */
+	unsigned int sysctl;		/* 0x12C */
+	unsigned int stat;		/* 0x130 */
+	unsigned int ie;		/* 0x134 */
+	unsigned char res4[0x8];
+	unsigned int capa;		/* 0x140 */
+} hsmmc_t;
+
+/*
+ * OMAP HS MMC Bit definitions
+ */
+#define MMC_SOFTRESET			(0x1 << 1)
+#define RESETDONE			(0x1 << 0)
+#define NOOPENDRAIN			(0x0 << 0)
+#define OPENDRAIN			(0x1 << 0)
+#define OD				(0x1 << 0)
+#define INIT_NOINIT			(0x0 << 1)
+#define INIT_INITSTREAM			(0x1 << 1)
+#define HR_NOHOSTRESP			(0x0 << 2)
+#define STR_BLOCK			(0x0 << 3)
+#define MODE_FUNC			(0x0 << 4)
+#define DW8_1_4BITMODE			(0x0 << 5)
+#define MIT_CTO				(0x0 << 6)
+#define CDP_ACTIVEHIGH			(0x0 << 7)
+#define WPP_ACTIVEHIGH			(0x0 << 8)
+#define RESERVED_MASK			(0x3 << 9)
+#define CTPL_MMC_SD			(0x0 << 11)
+#define BLEN_512BYTESLEN		(0x200 << 0)
+#define NBLK_STPCNT			(0x0 << 16)
+#define DE_DISABLE			(0x0 << 0)
+#define BCE_DISABLE			(0x0 << 1)
+#define ACEN_DISABLE			(0x0 << 2)
+#define DDIR_OFFSET			(4)
+#define DDIR_MASK			(0x1 << 4)
+#define DDIR_WRITE			(0x0 << 4)
+#define DDIR_READ			(0x1 << 4)
+#define MSBS_SGLEBLK			(0x0 << 5)
+#define RSP_TYPE_OFFSET			(16)
+#define RSP_TYPE_MASK			(0x3 << 16)
+#define RSP_TYPE_NORSP			(0x0 << 16)
+#define RSP_TYPE_LGHT136		(0x1 << 16)
+#define RSP_TYPE_LGHT48			(0x2 << 16)
+#define RSP_TYPE_LGHT48B		(0x3 << 16)
+#define CCCE_NOCHECK			(0x0 << 19)
+#define CCCE_CHECK			(0x1 << 19)
+#define CICE_NOCHECK			(0x0 << 20)
+#define CICE_CHECK			(0x1 << 20)
+#define DP_OFFSET			(21)
+#define DP_MASK				(0x1 << 21)
+#define DP_NO_DATA			(0x0 << 21)
+#define DP_DATA				(0x1 << 21)
+#define CMD_TYPE_NORMAL			(0x0 << 22)
+#define INDEX_OFFSET			(24)
+#define INDEX_MASK			(0x3f << 24)
+#define INDEX(i)			(i << 24)
+#define DATI_MASK			(0x1 << 1)
+#define DATI_CMDDIS			(0x1 << 1)
+#define DTW_1_BITMODE			(0x0 << 1)
+#define DTW_4_BITMODE			(0x1 << 1)
+#define SDBP_PWROFF			(0x0 << 8)
+#define SDBP_PWRON			(0x1 << 8)
+#define SDVS_1V8			(0x5 << 9)
+#define SDVS_3V0			(0x6 << 9)
+#define ICE_MASK			(0x1 << 0)
+#define ICE_STOP			(0x0 << 0)
+#define ICS_MASK			(0x1 << 1)
+#define ICS_NOTREADY			(0x0 << 1)
+#define ICE_OSCILLATE			(0x1 << 0)
+#define CEN_MASK			(0x1 << 2)
+#define CEN_DISABLE			(0x0 << 2)
+#define CEN_ENABLE			(0x1 << 2)
+#define CLKD_OFFSET			(6)
+#define CLKD_MASK			(0x3FF << 6)
+#define DTO_MASK			(0xF << 16)
+#define DTO_15THDTO			(0xE << 16)
+#define SOFTRESETALL			(0x1 << 24)
+#define CC_MASK				(0x1 << 0)
+#define TC_MASK				(0x1 << 1)
+#define BWR_MASK			(0x1 << 4)
+#define BRR_MASK			(0x1 << 5)
+#define ERRI_MASK			(0x1 << 15)
+#define IE_CC				(0x01 << 0)
+#define IE_TC				(0x01 << 1)
+#define IE_BWR				(0x01 << 4)
+#define IE_BRR				(0x01 << 5)
+#define IE_CTO				(0x01 << 16)
+#define IE_CCRC				(0x01 << 17)
+#define IE_CEB				(0x01 << 18)
+#define IE_CIE				(0x01 << 19)
+#define IE_DTO				(0x01 << 20)
+#define IE_DCRC				(0x01 << 21)
+#define IE_DEB				(0x01 << 22)
+#define IE_CERR				(0x01 << 28)
+#define IE_BADA				(0x01 << 29)
+
+#define VS30_3V0SUP			(1 << 25)
+#define VS18_1V8SUP			(1 << 26)
+
+/* Driver definitions */
+#define MMCSD_SECTOR_SIZE		512
+#define MMC_CARD			0
+#define SD_CARD				1
+#define BYTE_MODE			0
+#define SECTOR_MODE			1
+#define CLK_INITSEQ			0
+#define CLK_400KHZ			1
+#define CLK_MISC			2
+
+typedef struct {
+	unsigned int card_type;
+	unsigned int version;
+	unsigned int mode;
+	unsigned int size;
+	unsigned int RCA;
+} mmc_card_data;
+
+#define mmc_reg_out(addr, mask, val)\
+	writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
new file mode 100644
index 0000000000..d123d6a0d4
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -0,0 +1,118 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Authors:
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * Derived from OMAP3 work by
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP4_H_
+#define _OMAP4_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP44XX_L4_CORE_BASE	0x4A000000
+#define OMAP44XX_L4_WKUP_BASE	0x4A300000
+#define OMAP44XX_L4_PER_BASE	0x48000000
+
+/* CONTROL */
+#define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
+
+/* UART */
+#define UART1_BASE		(OMAP44XX_L4_PER_BASE + 0x6a000)
+#define UART2_BASE		(OMAP44XX_L4_PER_BASE + 0x6c000)
+#define UART3_BASE		(OMAP44XX_L4_PER_BASE + 0x20000)
+
+/* General Purpose Timers */
+#define GPT1_BASE		(OMAP44XX_L4_WKUP_BASE + 0x18000)
+#define GPT2_BASE		(OMAP44XX_L4_PER_BASE  + 0x32000)
+#define GPT3_BASE		(OMAP44XX_L4_PER_BASE  + 0x34000)
+
+/* Watchdog Timer2 - MPU watchdog */
+#define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
+
+/* 32KTIMER */
+#define SYNC_32KTIMER_BASE	(OMAP44XX_L4_WKUP_BASE + 0x4000)
+
+/* GPMC */
+#define GPMC_BASE	0x50000000
+
+/*
+ * Hardware Register Details
+ */
+
+/* Watchdog Timer */
+#define WD_UNLOCK1		0xAAAA
+#define WD_UNLOCK2		0x5555
+
+/* GP Timer */
+#define TCLR_ST			(0x1 << 0)
+#define TCLR_AR			(0x1 << 1)
+#define TCLR_PRE		(0x1 << 5)
+
+/*
+ * PRCM
+ */
+
+/* PRM */
+#define PRM_BASE		0x4A306000
+#define PRM_DEVICE_BASE		(PRM_BASE + 0x1B00)
+
+#define PRM_RSTCTRL		PRM_DEVICE_BASE
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+	unsigned char res[0x10];
+	unsigned int s32k_cr;	/* 0x10 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Non-secure SRAM Addresses
+ * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
+ * at 0x40304000(EMU base) so that our code works for both EMU and GP
+ */
+#define NON_SECURE_SRAM_START	0x40304000
+#define NON_SECURE_SRAM_END	0x4030E000	/* Not inclusive */
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_ROM_VECT_BASE	0x4030D000
+/* Temporary SRAM stack used while low level init is done */
+#define LOW_LEVEL_SRAM_STACK	NON_SECURE_SRAM_END
+
+/*
+ * OMAP4 real hardware:
+ * TODO: Change this to the IDCODE in the hw regsiter
+ */
+#define CPU_OMAP4430_ES10	1
+#define CPU_OMAP4430_ES20	2
+
+#endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
new file mode 100644
index 0000000000..6f4d3d504b
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/arch/omap4.h>
+#include <asm/io.h>
+
+struct omap_sysinfo {
+	char *board_string;
+};
+
+void watchdog_init(void);
+u32 get_device_type(void);
+void invalidate_dcache(u32);
+
+extern const struct omap_sysinfo sysinfo;
+
+#endif
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index 6455d1dc3c..e9f6625ce0 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -46,7 +46,7 @@
 /*
  * This the the zoom2, board specific, gpmc configuration for the
  * quad uart on the debug board.   The more general gpmc configurations
- * are setup at the cpu level in arch/arm/cpu/arm_cortexa8/omap3/mem.c
+ * are setup at the cpu level in arch/arm/cpu/armv7/omap3/mem.c
  *
  * The details of the setting of the serial gpmc setup are not available.
  * The values were provided by another party.
diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
new file mode 100644
index 0000000000..81e54692bb
--- /dev/null
+++ b/board/ti/panda/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= panda.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/panda/config.mk b/board/ti/panda/config.mk
new file mode 100644
index 0000000000..7382263765
--- /dev/null
+++ b/board/ti/panda/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2006-2009
+# Texas Instruments Incorporated, <www.ti.com>
+#
+# OMAP 4430 SDP
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# SDRAM Address Space:
+# 8000'0000 - 9fff'ffff (512 MB)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# Let's place u-boot 1MB before the end of SDRAM.
+TEXT_BASE = 0x9ff00000
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
new file mode 100644
index 0000000000..46a5d1dcbf
--- /dev/null
+++ b/board/ti/panda/panda.c
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+	"Board: OMAP4 Panda\n"
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
+	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return 0;
+}
+
+/**
+ * @brief misc_init_r - Configure Panda board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+	return 0;
+}
diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile
new file mode 100644
index 0000000000..2554c7b081
--- /dev/null
+++ b/board/ti/sdp4430/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= sdp.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/sdp4430/config.mk b/board/ti/sdp4430/config.mk
new file mode 100644
index 0000000000..7382263765
--- /dev/null
+++ b/board/ti/sdp4430/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2006-2009
+# Texas Instruments Incorporated, <www.ti.com>
+#
+# OMAP 4430 SDP
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# SDRAM Address Space:
+# 8000'0000 - 9fff'ffff (512 MB)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# Let's place u-boot 1MB before the end of SDRAM.
+TEXT_BASE = 0x9ff00000
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
new file mode 100644
index 0000000000..6ae016c6b8
--- /dev/null
+++ b/board/ti/sdp4430/sdp.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Aneesh V       <aneesh@ti.com>
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+	"Board: OMAP4430 SDP\n"
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP_4430SDP;
+	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return 0;
+}
+
+/**
+ * @brief misc_init_r - Configure SDP board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+	return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 17a6f93148..a9be4390ae 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -45,7 +45,7 @@ pm9261		arm	arm926ejs	-		ronetix		at91
 pm9263		arm	arm926ejs	-		ronetix		at91
 suen3		arm	arm926ejs	km_arm		keymile		kirkwood
 rd6281a		arm	arm926ejs	-		Marvell		kirkwood
-mx51evk		arm	arm_cortexa8	mx51evk		freescale	mx51
+mx51evk		arm	armv7		mx51evk		freescale	mx51
 actux1		arm	ixp
 actux2		arm	ixp
 actux3		arm	ixp
@@ -253,17 +253,19 @@ imx27lite	arm	arm926ejs	imx27lite	logicpd		mx27
 magnesium	arm	arm926ejs	imx27lite	logicpd		mx27
 omap5912osk	arm	arm926ejs	-		ti		omap
 edminiv2	arm	arm926ejs	-		LaCie		orion5x
-omap3_overo	arm	arm_cortexa8	overo		-		omap3
-omap3_pandora	arm	arm_cortexa8	pandora		-		omap3
-omap3_zoom1	arm	arm_cortexa8	zoom1		logicpd		omap3
-omap3_zoom2	arm	arm_cortexa8	zoom2		logicpd		omap3
-omap3_beagle	arm	arm_cortexa8	beagle		ti		omap3
-omap3_evm	arm	arm_cortexa8	evm		ti		omap3
-omap3_sdp3430	arm	arm_cortexa8	sdp3430		ti		omap3
-am3517_evm	arm	arm_cortexa8	am3517evm	logicpd		omap3
-devkit8000	arm	arm_cortexa8	devkit8000	timll		omap3
-s5p_goni	arm	arm_cortexa8	goni		samsung		s5pc1xx
-smdkc100	arm	arm_cortexa8	smdkc100	samsung		s5pc1xx
+omap3_overo	arm	armv7		overo		-		omap3
+omap3_pandora	arm	armv7		pandora		-		omap3
+omap3_zoom1	arm	armv7		zoom1		logicpd		omap3
+omap3_zoom2	arm	armv7		zoom2		logicpd		omap3
+omap3_beagle	arm	armv7		beagle		ti		omap3
+omap3_evm	arm	armv7		evm		ti		omap3
+omap3_sdp3430	arm	armv7		sdp3430		ti		omap3
+omap4_panda	arm	armv7		panda		ti		omap4
+omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
+am3517_evm	arm	armv7		am3517evm	logicpd		omap3
+devkit8000	arm	armv7		devkit8000	timll		omap3
+s5p_goni	arm	armv7		goni		samsung		s5pc1xx
+smdkc100	arm	armv7		smdkc100	samsung		s5pc1xx
 ixdpg425	arm	ixp
 lpd7a400	arm	lh7a40x		lpd7a40x
 lpd7a404	arm	lh7a40x		lpd7a40x
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ff18991f0e..3256133dc2 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -25,6 +25,8 @@
 #include <asm/arch/i2c.h>
 #include <asm/io.h>
 
+#include "omap24xx_i2c.h"
+
 static void wait_for_bb (void);
 static u16 wait_for_pin (void);
 static void flush_fifo(void);
@@ -176,7 +178,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
 
 		status = wait_for_pin ();
 		if (status & I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+    defined(CONFIG_OMAP44XX)
 			*value = readb (&i2c_base->data);
 #else
 			*value = readw (&i2c_base->data);
@@ -221,7 +224,8 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
 	status = wait_for_pin ();
 
 	if (status & I2C_STAT_XRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+    defined(CONFIG_OMAP44XX)
 		/* send out 1 byte */
 		writeb (regoffset, &i2c_base->data);
 		writew (I2C_STAT_XRDY, &i2c_base->stat);
@@ -274,7 +278,8 @@ static void flush_fifo(void)
 	while(1){
 		stat = readw(&i2c_base->stat);
 		if(stat == I2C_STAT_RRDY){
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+    defined(CONFIG_OMAP44XX)
 			readb(&i2c_base->data);
 #else
 			readw(&i2c_base->data);
@@ -435,3 +440,9 @@ int i2c_set_bus_num(unsigned int bus)
 
 	return 0;
 }
+
+int i2c_get_bus_num(void)
+{
+	return (int) current_bus;
+}
+
diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h
new file mode 100644
index 0000000000..92a3416e0e
--- /dev/null
+++ b/drivers/i2c/omap24xx_i2c.h
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2004-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP24XX_I2C_H_
+#define _OMAP24XX_I2C_H_
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_GC_IE	(1 << 5)
+#define I2C_IE_XRDY_IE	(1 << 4) /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE	(1 << 3) /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE	(1 << 2) /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE	(1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE	(1 << 0) /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_SBD	(1 << 15) /* Single byte data */
+#define I2C_STAT_BB	(1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR	(1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF	(1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS	(1 << 9)  /* Address as slave */
+#define I2C_STAT_GC	(1 << 5)
+#define I2C_STAT_XRDY	(1 << 4)  /* Transmit data ready */
+#define I2C_STAT_RRDY	(1 << 3)  /* Receive data ready */
+#define I2C_STAT_ARDY	(1 << 2)  /* Register access ready */
+#define I2C_STAT_NACK	(1 << 1)  /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL	(1 << 0)  /* Arbitration lost interrupt enable */
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK	7
+#define I2C_INTCODE_NONE	0
+#define I2C_INTCODE_AL		1	/* Arbitration lost */
+#define I2C_INTCODE_NAK		2	/* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY	3	/* Register access ready */
+#define I2C_INTCODE_RRDY	4	/* Rcv data ready */
+#define I2C_INTCODE_XRDY	5	/* Xmit data ready */
+
+/* I2C Buffer Configuration Register (I2C_BUF): */
+
+#define I2C_BUF_RDMA_EN		(1 << 15) /* Receive DMA channel enable */
+#define I2C_BUF_XDMA_EN		(1 << 7)  /* Transmit DMA channel enable */
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN	(1 << 15)  /* I2C module enable */
+#define I2C_CON_BE	(1 << 14)  /* Big endian mode */
+#define I2C_CON_STB	(1 << 11)  /* Start byte mode (master mode only) */
+#define I2C_CON_MST	(1 << 10)  /* Master/slave mode */
+#define I2C_CON_TRX	(1 << 9)   /* Transmitter/receiver mode */
+				   /* (master mode only) */
+#define I2C_CON_XA	(1 << 8)   /* Expand address */
+#define I2C_CON_STP	(1 << 1)   /* Stop condition (master mode only) */
+#define I2C_CON_STT	(1 << 0)   /* Start condition (master mode only) */
+
+/* I2C System Test Register (I2C_SYSTEST): */
+
+#define I2C_SYSTEST_ST_EN	(1 << 15) /* System test enable */
+#define I2C_SYSTEST_FREE	(1 << 14) /* Free running mode, on brkpoint) */
+#define I2C_SYSTEST_TMODE_MASK	(3 << 12) /* Test mode select */
+#define I2C_SYSTEST_TMODE_SHIFT	(12)	  /* Test mode select */
+#define I2C_SYSTEST_SCL_I	(1 << 3)  /* SCL line sense input value */
+#define I2C_SYSTEST_SCL_O	(1 << 2)  /* SCL line drive output value */
+#define I2C_SYSTEST_SDA_I	(1 << 1)  /* SDA line sense input value */
+#define I2C_SYSTEST_SDA_O	(1 << 0)  /* SDA line drive output value */
+
+#define I2C_SCLL_SCLL		0
+#define I2C_SCLL_SCLL_M		0xFF
+#define I2C_SCLL_HSSCLL		8
+#define I2C_SCLH_HSSCLL_M	0xFF
+#define I2C_SCLH_SCLH		0
+#define I2C_SCLH_SCLH_M		0xFF
+#define I2C_SCLH_HSSCLH		8
+#define I2C_SCLH_HSSCLH_M	0xFF
+
+#define OMAP_I2C_STANDARD	100000
+#define OMAP_I2C_FAST_MODE	400000
+#define OMAP_I2C_HIGH_SPEED	3400000
+
+#define SYSTEM_CLOCK_12		12000000
+#define SYSTEM_CLOCK_13		13000000
+#define SYSTEM_CLOCK_192	19200000
+#define SYSTEM_CLOCK_96		96000000
+
+/* Use the reference value of 96MHz if not explicitly set by the board */
+#ifndef I2C_IP_CLK
+#define I2C_IP_CLK		SYSTEM_CLOCK_96
+#endif
+
+/*
+ * The reference minimum clock for high speed is 19.2MHz.
+ * The linux 2.6.30 kernel uses this value.
+ * The reference minimum clock for fast mode is 9.6MHz
+ * The reference minimum clock for standard mode is 4MHz
+ * In TRM, the value of 12MHz is used.
+ */
+#ifndef I2C_INTERNAL_SAMPLING_CLK
+#define I2C_INTERNAL_SAMPLING_CLK	19200000
+#endif
+
+/*
+ * The equation for the low and high time is
+ * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed
+ * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed
+ *
+ * If the duty cycle is 50%
+ *
+ * tlow = scll + scll_trim = sampling clock / (2 * speed)
+ * thigh = sclh + sclh_trim = sampling clock / (2 * speed)
+ *
+ * In TRM
+ * scll_trim = 7
+ * sclh_trim = 5
+ *
+ * The linux 2.6.30 kernel uses
+ * scll_trim = 6
+ * sclh_trim = 6
+ *
+ * These are the trim values for standard and fast speed
+ */
+#ifndef I2C_FASTSPEED_SCLL_TRIM
+#define I2C_FASTSPEED_SCLL_TRIM		6
+#endif
+#ifndef I2C_FASTSPEED_SCLH_TRIM
+#define I2C_FASTSPEED_SCLH_TRIM		6
+#endif
+
+/* These are the trim values for high speed */
+#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
+#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM	I2C_FASTSPEED_SCLL_TRIM
+#endif
+#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
+#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM	I2C_FASTSPEED_SCLH_TRIM
+#endif
+#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
+#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM	I2C_FASTSPEED_SCLL_TRIM
+#endif
+#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
+#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM	I2C_FASTSPEED_SCLH_TRIM
+#endif
+
+#define I2C_PSC_MAX		0x0f
+#define I2C_PSC_MIN		0x00
+
+#endif /* _OMAP24XX_I2C_H_ */
diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
index 96c0e653ba..9506cca218 100644
--- a/drivers/mmc/omap3_mmc.c
+++ b/drivers/mmc/omap3_mmc.c
@@ -30,7 +30,8 @@
 #include <i2c.h>
 #include <twl4030.h>
 #include <asm/io.h>
-#include <asm/arch/mmc.h>
+
+#include "omap3_mmc.h"
 
 const unsigned short mmc_transspeed_val[15][4] = {
 	{CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)},
@@ -52,7 +53,27 @@ const unsigned short mmc_transspeed_val[15][4] = {
 
 mmc_card_data cur_card_data;
 static block_dev_desc_t mmc_blk_dev;
-static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE;
+static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
+
+int mmc_set_dev(int dev_num)
+{
+	switch (dev_num) {
+	case 1:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
+		break;
+	case 2:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC2_BASE;
+		break;
+	case 3:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC3_BASE;
+		break;
+	default:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
+		return 1;
+	}
+
+	return 0;
+}
 
 block_dev_desc_t *mmc_get_dev(int dev)
 {
@@ -61,12 +82,14 @@ block_dev_desc_t *mmc_get_dev(int dev)
 
 unsigned char mmc_board_init(void)
 {
-	t2_t *t2_base = (t2_t *)T2_BASE;
-
 #if defined(CONFIG_TWL4030_POWER)
 	twl4030_power_mmc_init();
 #endif
 
+#if defined(CONFIG_OMAP34XX)
+	t2_t *t2_base = (t2_t *)T2_BASE;
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
 	writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
 		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
 		&t2_base->pbias_lite);
@@ -74,6 +97,20 @@ unsigned char mmc_board_init(void)
 	writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
 		&t2_base->devconf0);
 
+	writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
+		&t2_base->devconf1);
+
+	writel(readl(&prcm_base->fclken1_core) |
+		EN_MMC1 | EN_MMC2 | EN_MMC3,
+		&prcm_base->fclken1_core);
+
+	writel(readl(&prcm_base->iclken1_core) |
+		EN_MMC1 | EN_MMC2 | EN_MMC3,
+		&prcm_base->iclken1_core);
+#endif
+
+/* TODO add appropriate OMAP4 init */
+
 	return 1;
 }
 
@@ -512,8 +549,11 @@ unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt,
 	return 1;
 }
 
-int mmc_legacy_init(int verbose)
+int mmc_legacy_init(int dev)
 {
+	if (mmc_set_dev(dev) != 0)
+		return 1;
+
 	if (configure_mmc(&cur_card_data) != 1)
 		return 1;
 
diff --git a/arch/arm/include/asm/arch-omap3/mmc.h b/drivers/mmc/omap3_mmc.h
index 196ffdcff6..cbb3dc3a3a 100644
--- a/arch/arm/include/asm/arch-omap3/mmc.h
+++ b/drivers/mmc/omap3_mmc.h
@@ -25,7 +25,7 @@
 #ifndef MMC_H
 #define MMC_H
 
-#include "mmc_host_def.h"
+#include <asm/arch/mmc_host_def.h>
 
 /* Responses */
 #define RSP_TYPE_NONE	(RSP_TYPE_NORSP   | CCCE_NOCHECK | CICE_NOCHECK)
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index 4518ecbbc8..13aca52c7e 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -173,7 +173,7 @@ static int davinci_spi_read(struct spi_slave *slave, unsigned int len,
 }
 
 static int davinci_spi_write(struct spi_slave *slave, unsigned int len,
-		const u8 *txp, unsigned long flags)
+			     const u8 *txp, unsigned long flags)
 {
 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 	unsigned int data1_reg_val;
@@ -237,7 +237,7 @@ static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len,
 #endif
 
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-		const void *dout, void *din, unsigned long flags)
+	     const void *dout, void *din, unsigned long flags)
 {
 	unsigned int len;
 
@@ -266,6 +266,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 #ifndef CONFIG_SPI_HALF_DUPLEX
 	else
 		return davinci_spi_read_write(slave, len, din, dout, flags);
+#else
+	printf("SPI full duplex transaction requested with "
+	       "CONFIG_SPI_HALF_DUPLEX defined.\n");
+	flags |= SPI_XFER_END;
 #endif
 
 out:
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 513d005ee4..10af21b1b8 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -28,7 +28,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3_AM3517EVM	1	/* working with AM3517EVM */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 1076de6fcd..281577153f 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -32,7 +32,7 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e018b217cf..ae5a7919d8 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -31,7 +31,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index af7c65ad30..c4aa220f78 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -36,7 +36,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index b4418319f1..3a3b389614 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -23,7 +23,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 9eba003c21..3308aceb49 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -26,7 +26,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index d4482d3ae6..5439aa3dd9 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -36,7 +36,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 1e88dc02e0..f612e0fd19 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -32,7 +32,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index be9daf4fcd..aaf929e08e 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -33,7 +33,7 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX		1	/* which is a 34XX */
 #define CONFIG_OMAP3430		1	/* which is in a 3430 */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
new file mode 100644
index 0000000000..b1e40a38f6
--- /dev/null
+++ b/include/configs/omap4_panda.h
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated.
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * Configuration settings for the TI OMAP4 Panda board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP44XX		1	/* which is a 44XX */
+#define CONFIG_OMAP4430		1	/* which is in a 4430 */
+#define CONFIG_PANDA		1	/* working with Panda */
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap4.h>
+
+/* Display CPU and Board Info */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+
+/* Clock Defines */
+#define V_OSCK			38400000	/* Clock output from T2 */
+#define V_SCLK                   V_OSCK
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 256k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE			(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+/* Vector Base */
+#define CONFIG_SYS_CA9_VECTOR_BASE	SRAM_ROM_VECT_BASE
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK			48000000
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		UART3_BASE
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+
+/* I2C  */
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_I2C_MULTI_BUS		1
+
+/* MMC */
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_SYS_MMC_SET_DEV		1
+#define CONFIG_DOS_PARTITION		1
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH	1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_EXT2		/* EXT2 Support                 */
+#define CONFIG_CMD_FAT		/* FAT support                  */
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support                  */
+
+/* Disabled commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
+#undef CONFIG_CMD_IMLS		/* List all found images        */
+
+/*
+ * Enabling relocation of u-boot by default
+ * Relocation can be skipped if u-boot is copied to the TEXT_BASE
+ */
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Environment setup
+ */
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyS2,115200n8\0" \
+	"mmcdev=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmc init ${mmcdev}; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run nandboot; " \
+			"fi; " \
+		"fi; " \
+	"fi"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"Panda # "
+#define CONFIG_SYS_CBSIZE		256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+/*
+ * memtest setup
+ */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (32 << 20))
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x80000000
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE		GPT1_BASE
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* Regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack */
+#endif
+
+/*
+ * SDRAM Memory Map
+ * Even though we use two CS all the memory
+ * is mapped to one contiguous block
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
new file mode 100644
index 0000000000..8121554448
--- /dev/null
+++ b/include/configs/omap4_sdp4430.h
@@ -0,0 +1,221 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated.
+ * Aneesh V       <aneesh@ti.com>
+ * Steve Sakoman  <steve@sakoman.com>
+ *
+ * Configuration settings for the TI SDP4430 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP44XX		1	/* which is a 44XX */
+#define CONFIG_OMAP4430		1	/* which is in a 4430 */
+#define CONFIG_4430SDP		1	/* working with SDP */
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap4.h>
+
+/* Display CPU and Board Info */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF			1
+
+/* Clock Defines */
+#define V_OSCK			38400000	/* Clock output from T2 */
+#define V_SCLK                   V_OSCK
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 256k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE			(256 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
+						/* initial data */
+/* Vector Base */
+#define CONFIG_SYS_CA9_VECTOR_BASE	SRAM_ROM_VECT_BASE
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK			48000000
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		UART3_BASE
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}
+
+/* I2C  */
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_I2C_MULTI_BUS		1
+
+/* MMC */
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_SYS_MMC_SET_DEV		1
+#define CONFIG_DOS_PARTITION		1
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH	1
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_EXT2		/* EXT2 Support                 */
+#define CONFIG_CMD_FAT		/* FAT support                  */
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support                  */
+
+/* Disabled commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
+#undef CONFIG_CMD_IMLS		/* List all found images        */
+
+/*
+ * Enabling relocation of u-boot by default
+ * Relocation can be skipped if u-boot is copied to the TEXT_BASE
+ */
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Environment setup
+ */
+
+/* allow overwriting serial config and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x82000000\0" \
+	"console=ttyS2,115200n8\0" \
+	"mmcdev=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext3 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
+		"run mmcargs; " \
+		"bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"if mmc init ${mmcdev}; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else run nandboot; " \
+			"fi; " \
+		"fi; " \
+	"fi"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER	/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"OMAP4430 SDP # "
+#define CONFIG_SYS_CBSIZE		256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+/*
+ * memtest setup
+ */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (32 << 20))
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x80000000
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE		GPT1_BASE
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* Regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack */
+#endif
+
+/*
+ * SDRAM Memory Map
+ * Even though we use two CS all the memory
+ * is mapped to one contiguous block
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 171ec94e76..ff0dbd3c21 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -28,7 +28,7 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
 #define CONFIG_S5PC1XX		1	/* which is in a S5PC1XX Family */
 #define CONFIG_S5PC110		1	/* which is in a S5PC110 */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 09bce6d0fa..76a47c4456 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -32,7 +32,7 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
 #define CONFIG_SAMSUNG		1	/* in a SAMSUNG core */
 #define CONFIG_S5PC1XX		1	/* which is in a S5PC1XX Family */
 #define CONFIG_S5PC100		1	/* which is in a S5PC100 */
diff --git a/include/mmc.h b/include/mmc.h
index 8973bc7658..fcb237e81e 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -271,6 +271,7 @@ int mmc_initialize(bd_t *bis);
 int mmc_init(struct mmc *mmc);
 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
 struct mmc *find_mmc_device(int dev_num);
+int mmc_set_dev(int dev_num);
 void print_mmc_devices(char separator);
 int board_mmc_getcd(u8 *cd, struct mmc *mmc);