diff options
| -rw-r--r-- | CHANGELOG | 9 | ||||
| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | board/tqm5200/config.mk | 5 | ||||
| -rw-r--r-- | include/configs/TQM5200.h | 6 |
4 files changed, 19 insertions, 5 deletions
@@ -2,11 +2,20 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add support for high-boot on TQM5200 and TQM5200S boards. + Hint: the CPLD on the TQM5200 must be programmed with a software + version supporting the high boot option! The new TQM5200S is + already supporting this option. On the TQM5200 this option will be + supported in configurations with MPC5200 rev B processors. + To actually "high boot", set jumper X30 on the STK52xx. + Patch by Martin Krause, 12 Jul 2006 + * Add support for new TQM5200 revisions - Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank) + Patch by Martin Krause, 07 Jul 2006 * Fix support for PS/2 keyboard on TQM85xx boards The PS/2 keyobard driver for the TQM85xx modules only supports the @@ -407,6 +407,7 @@ Total5200_Rev2_lowboot_config: unconfig TQM5200_config \ TQM5200_STK100_config \ TQM5200_B_config \ +TQM5200_B_HIGHBOOT_config \ MiniFAP_config: unconfig @ >include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ @@ -421,6 +422,9 @@ MiniFAP_config: unconfig { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \ echo "... with MPC5200B processor" ; \ } + @[ -z "$(findstring HIGHBOOT,$@)" ] || \ + { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \ + } @echo "#define CONFIG_CS_AUTOCONF">>include/config.h ; @echo "... with automatic CS configuration" ; @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 diff --git a/board/tqm5200/config.mk b/board/tqm5200/config.mk index 585a99a8c7..84ddee80d9 100644 --- a/board/tqm5200/config.mk +++ b/board/tqm5200/config.mk @@ -28,12 +28,17 @@ # # 0xFC000000 boot low (standard configuration with room for max 64 MByte # Flash ROM) +# 0xFFF00000 boot high (for a backup copy of U-Boot) # 0x00100000 boot from RAM (for testing only) # +sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp + ifndef TEXT_BASE ## Standard: boot low TEXT_BASE = 0xFC000000 +## For a backup copy of U-Boot at the end of flash: boot high +# TEXT_BASE = 0xFFF00000 ## For testing: boot from RAM # TEXT_BASE = 0x00100000 endif diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 032177e306..0ef0b9155e 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -308,7 +308,7 @@ /* * Flash configuration */ -#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ +#define CFG_FLASH_BASE 0xFC000000 /* use CFI flash driver */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ @@ -319,15 +319,11 @@ #define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ #define CFG_FLASH_USE_BUFFER_WRITE 1 -#if !defined(CFG_LOWBOOT) -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) -#else /* CFG_LOWBOOT */ #if defined(CONFIG_TQM5200_B) #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) #else #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) #endif /* CONFIG_TQM5200_B */ -#endif /* CFG_LOWBOOT */ #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ |