diff options
| -rw-r--r-- | arch/arm/dts/fsl-ls1088a-qds.dts | 37 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls1088a.dtsi | 5 | ||||
| -rw-r--r-- | board/freescale/ls1088a/MAINTAINERS | 2 | ||||
| -rw-r--r-- | board/freescale/ls1088a/ls1088a.c | 5 | ||||
| -rw-r--r-- | configs/ls1088aqds_defconfig | 43 | ||||
| -rw-r--r-- | configs/ls1088aqds_sdcard_ifc_defconfig | 54 | ||||
| -rw-r--r-- | include/configs/ls1088aqds.h | 28 | ||||
| -rw-r--r-- | include/configs/ls2080ardb.h | 14 |
8 files changed, 167 insertions, 21 deletions
diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts index 225c7c53c7..02000fcba8 100644 --- a/arch/arm/dts/fsl-ls1088a-qds.dts +++ b/arch/arm/dts/fsl-ls1088a-qds.dts @@ -19,6 +19,43 @@ }; }; +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus", "fsl,ls1088aqds-fpga", + "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + bank-width = <1>; + device-width = <1>; + ranges = <0 2 0 0x100>; + }; +}; + &dspi { bus-num = <0>; status = "okay"; diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index f8f8654e15..b4a42cf5d0 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -75,6 +75,11 @@ reg-names = "QuadSPI", "QuadSPI-memory"; num-cs = <4>; }; + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + }; usb0: usb3@3100000 { compatible = "fsl,layerscape-dwc3"; diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS index 371e5db9ad..4d804d9447 100644 --- a/board/freescale/ls1088a/MAINTAINERS +++ b/board/freescale/ls1088a/MAINTAINERS @@ -15,6 +15,8 @@ F: board/freescale/ls1088a/ F: include/configs/ls1088aqds.h F: configs/ls1088aqds_qspi_defconfig F: configs/ls1088aqds_sdcard_qspi_defconfig +F: configs/ls1088aqds_defconfig +F: configs/ls1088aqds_sdcard_ifc_defconfig LS1088AQDS_QSPI_SECURE_BOOT BOARD M: Udit Agarwal <udit.agarwal@nxp.com> diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index 56e454ff20..a5fa050991 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -31,6 +31,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { +#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_TARGET_LS1088AQDS) + i2c_early_init_f(); +#endif fsl_lsch3_early_init_f(); return 0; } @@ -168,6 +171,7 @@ int checkboard(void) return 0; } +#endif bool if_board_diff_clk(void) { @@ -221,7 +225,6 @@ unsigned long get_board_ddr_clk(void) return 66666666; } -#endif int select_i2c_ch_pca9547(u8 ch) { diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig new file mode 100644 index 0000000000..acb9d7b8d2 --- /dev/null +++ b/configs/ls1088aqds_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088AQDS=y +CONFIG_SYS_TEXT_BASE=0x30100000 +# CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_FSL_IFC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_FSL_LS_PPA=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_CMD_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_USE_BOOTCOMMAND is not set diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig new file mode 100644 index 0000000000..d4150264f4 --- /dev/null +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -0,0 +1,54 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088AQDS=y +CONFIG_SYS_TEXT_BASE=0x80400000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_FSL_LS_PPA=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_OF_BOARD_SETUP=y +CONFIG_PARTITIONS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" +CONFIG_SD_BOOT=y +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_SPL=y +CONFIG_SPL_BUILD=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FSL_IFC=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 897a0497bb..34f991caa5 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -27,7 +27,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #else -#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 @@ -41,6 +40,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 #else +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #endif @@ -89,13 +90,14 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TAVDS(0x6) | \ FTIM0_NOR_TEAHC(0x5)) #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1a) |\ + FTIM1_NOR_TRAD_NOR(0x1a) | \ FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x8) | \ + FTIM2_NOR_TCH(0x8) | \ + FTIM2_NOR_TWPH(0xe) | \ FTIM2_NOR_TWP(0x1c)) #define CONFIG_SYS_NOR_FTIM3 0x04000000 #define CONFIG_SYS_IFC_CCR 0x01000000 @@ -197,7 +199,7 @@ unsigned long get_board_ddr_clk(void); | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024) +#define SYS_FPGA_AMASK IFC_AMASK(64 * 1024) #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) #else @@ -226,7 +228,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT #define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR #define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL -#define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_AMASK2 SYS_FPGA_AMASK #define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR #define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 #define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 @@ -262,13 +264,13 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_CSPR3_FINAL CONFIG_SYS_FPGA_CSPR_FINAL -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK +#define CONFIG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL +#define CONFIG_SYS_AMASK3 SYS_FPGA_AMASK #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_CS_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_CS_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_CS_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_CS_FTIM3 +#define CONFIG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 +#define CONFIG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 +#define CONFIG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 +#define CONFIG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 #endif #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 692f64275a..5033008ca7 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -369,7 +369,7 @@ unsigned long get_board_sys_clk(void); "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ "fdt_addr=0x64f00000\0" \ - "kernel_addr=0x65000000\0" \ + "kernel_addr=0x581000000\0" \ "kernel_start=0x1000000\0" \ "kernelheader_start=0x800000\0" \ "scriptaddr=0x80000000\0" \ @@ -439,8 +439,8 @@ unsigned long get_board_sys_clk(void); "&& esbc_validate 0x20780000; " \ "env exists mcinitcmd && " \ "fsl_mc lazyapply dpl 0x20d00000; " \ - "run distro_bootcmd;env exists secureboot " \ - " && esbc_halt;run qspi_bootcmd; " + "run distro_bootcmd;run qspi_bootcmd; " \ + "env exists secureboot && esbc_halt;" #elif defined(CONFIG_SD_BOOT) /* Try to boot an on-SD kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ @@ -450,16 +450,16 @@ unsigned long get_board_sys_clk(void); "env exists mcinitcmd && run mcinitcmd " \ "&& mmc read 0x88000000 0x6800 0x800 " \ "&& fsl_mc lazyapply dpl 0x88000000; " \ - "run distro_bootcmd;env exists secureboot " \ - "&& esbc_halt;run sd_bootcmd;" + "run distro_bootcmd;run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;" #else /* Try to boot an on-NOR kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& esbc_validate 0x580780000; env exists mcinitcmd "\ "&& fsl_mc lazyapply dpl 0x580d00000;" \ - "run distro_bootcmd; env exists secureboot " \ - "&& esbc_halt; run nor_bootcmd;" + "run distro_bootcmd;run nor_bootcmd; " \ + "env exists secureboot && esbc_halt;" #endif /* MAC/PHY configuration */ |