diff options
| -rw-r--r-- | board/atum8548/Makefile | 9 | ||||
| -rw-r--r-- | board/atum8548/atum8548.c | 8 | ||||
| -rw-r--r-- | board/atum8548/ddr.c | 80 | ||||
| -rw-r--r-- | include/configs/ATUM8548.h | 62 |
4 files changed, 122 insertions, 37 deletions
diff --git a/board/atum8548/Makefile b/board/atum8548/Makefile index d2e689f1fa..b991308191 100644 --- a/board/atum8548/Makefile +++ b/board/atum8548/Makefile @@ -29,10 +29,13 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o law.o tlb.o +COBJS-y += $(BOARD).o +COBJS-y += law.o +COBJS-y += tlb.o +COBJS-$(CONFIG_FSL_DDR2) += ddr.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 34f4599048..337cf31ad5 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -29,7 +29,9 @@ #include <asm/processor.h> #include <asm/immap_85xx.h> #include <asm/immap_fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> #include <asm/io.h> +#include <asm/mmu.h> #include <spd_sdram.h> #include <miiphy.h> #include <libfdt.h> @@ -106,8 +108,10 @@ initdram(int board_type) puts("Initializing\n"); #if defined(CONFIG_SPD_EEPROM) - puts("spd_sdram\n"); - dram_size = spd_sdram (); + puts("fsl_ddr_sdram\n"); + dram_size = fsl_ddr_sdram(); + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; #else puts("fixed_sdram\n"); dram_size = fixed_sdram (); diff --git a/board/atum8548/ddr.c b/board/atum8548/ddr.c new file mode 100644 index 0000000000..f07d746c20 --- /dev/null +++ b/board/atum8548/ddr.c @@ -0,0 +1,80 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> + +static void +get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + + if (ctrl_num) { + printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); + return; + } + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); + } +} + +void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) +{ + /* + * Factors to consider for clock adjust: + * - number of chips on bus + * - position of slot + * - DDR1 vs. DDR2? + * - ??? + * + * This needs to be determined on a board-by-board basis. + * 0110 3/4 cycle late + * 0111 7/8 cycle late + */ + popts->clk_adjust = 7; + + /* + * Factors to consider for CPO: + * - frequency + * - ddr1 vs. ddr2 + */ + popts->cpo_override = 10; + + /* + * Factors to consider for write data delay: + * - number of DIMMs + * + * 1 = 1/4 clock delay + * 2 = 1/2 clock delay + * 3 = 3/4 clock delay + * 4 = 1 clock delay + * 5 = 5/4 clock delay + * 6 = 3/2 clock delay + */ + popts->write_data_delay = 3; + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; +} diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 6aa881caca..5bc28f18f9 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -55,18 +55,11 @@ #define CONFIG_TSEC_ENET 1 /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/ -#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ -#define CONFIG_DDR_ECC /* only for ECC DDR module */ -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ - #define CONFIG_SYS_CLK_FREQ 33000000 /* @@ -104,33 +97,38 @@ #define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) -/* - * DDR Setup - */ -#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +/* DDR Setup */ +#define CONFIG_FSL_DDR2 +#undef CONFIG_FSL_DDR_INTERACTIVE +#define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_DDR_SPD -#if defined(CONFIG_SPD_EEPROM) - /* - * Determine DDR configuration from I2C interface. - */ - #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#else - /* - * Manually set up DDR parameters - */ - #define CFG_SDRAM_SIZE 1024 /* DDR is 1024MB */ - #define CFG_DDR_CS0_BNDS 0x0000000f /* 0-1024 */ - #define CFG_DDR_CS0_CONFIG 0x80000102 - #define CFG_DDR_TIMING_0 0x00260802 - #define CFG_DDR_TIMING_1 0x38355322 - #define CFG_DDR_TIMING_2 0x039048c7 - #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ - #define CFG_DDR_MODE 0x00000432 - #define CFG_DDR_INTERVAL 0x05150100 - #define DDR_SDRAM_CFG 0x43000000 -#endif +#define CFG_DDR_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 2 + +/* I2C addresses of SPD EEPROMs */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ + +/* Manually set up DDR parameters */ +#define CFG_SDRAM_SIZE 1024 /* DDR is 1024MB */ +#define CFG_DDR_CS0_BNDS 0x0000000f /* 0-1024 */ +#define CFG_DDR_CS0_CONFIG 0x80000102 +#define CFG_DDR_TIMING_0 0x00260802 +#define CFG_DDR_TIMING_1 0x38355322 +#define CFG_DDR_TIMING_2 0x039048c7 +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ +#define CFG_DDR_MODE 0x00000432 +#define CFG_DDR_INTERVAL 0x05150100 +#define DDR_SDRAM_CFG 0x43000000 #undef CONFIG_CLOCKS_IN_MHZ |