diff options
35 files changed, 1303 insertions, 367 deletions
@@ -472,6 +472,12 @@ The following options need to be configured: Board config to use DDR3. It can be enabled for SoCs with Freescale DDR3 controllers. + CONFIG_SYS_FSL_IFC_BE + Defines the IFC controller register space as Big Endian + + CONFIG_SYS_FSL_IFC_LE + Defines the IFC controller register space as Little Endian + CONFIG_SYS_FSL_PBL_PBI It enables addition of RCW (Power on reset configuration) in built image. Please refer doc/README.pblimage for more details diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 25db899e5f..70e09eaed5 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -75,6 +75,8 @@ static const char *serdes_prtcl_str[] = { [XFI_FM2_MAC9] = "XFI_FM2_MAC9", [XFI_FM2_MAC10] = "XFI_FM2_MAC10", [INTERLAKEN] = "INTERLAKEN", + [QSGMII_SW1_A] = "QSGMII_SW1_A", + [QSGMII_SW1_B] = "QSGMII_SW1_B", }; #endif diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c index 32075ce220..68160a9512 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c @@ -21,21 +21,6 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { SET_QP_INFO(8, 34, 1, 3), SET_QP_INFO(9, 35, 1, 0), SET_QP_INFO(10, 36, 1, 0), - SET_QP_INFO(11, 37, 1, 1), - SET_QP_INFO(12, 38, 1, 1), - SET_QP_INFO(13, 39, 1, 2), - SET_QP_INFO(14, 40, 1, 2), - SET_QP_INFO(15, 41, 1, 3), - SET_QP_INFO(16, 42, 1, 3), - SET_QP_INFO(17, 43, 1, 0), - SET_QP_INFO(18, 44, 1, 0), - SET_QP_INFO(19, 45, 1, 1), - SET_QP_INFO(20, 46, 1, 1), - SET_QP_INFO(21, 47, 1, 2), - SET_QP_INFO(22, 48, 1, 2), - SET_QP_INFO(23, 49, 1, 3), - SET_QP_INFO(24, 50, 1, 3), - SET_QP_INFO(25, 51, 1, 0), }; #endif @@ -60,11 +45,6 @@ struct liodn_id_table liodn_tbl[] = { SET_DMA_LIODN(1, 147), SET_DMA_LIODN(2, 227), - SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), - SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), - SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), - SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), - /* SET_NEXUS_LIODN(557), -- not yet implemented */ }; int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); @@ -77,8 +57,6 @@ struct liodn_id_table fman1_liodn_tbl[] = { SET_FMAN_RX_1G_LIODN(1, 3, 91), SET_FMAN_RX_1G_LIODN(1, 4, 92), SET_FMAN_RX_1G_LIODN(1, 5, 93), - SET_FMAN_RX_10G_LIODN(1, 0, 94), - SET_FMAN_RX_10G_LIODN(1, 1, 95), }; int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); #endif @@ -97,23 +75,9 @@ struct liodn_id_table sec_liodn_tbl[] = { }; int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); -#ifdef CONFIG_SYS_DPAA_RMAN -struct liodn_id_table rman_liodn_tbl[] = { - /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), -}; -int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); -#endif - struct liodn_id_table liodn_bases[] = { [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), #ifdef CONFIG_SYS_DPAA_FMAN [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), #endif -#ifdef CONFIG_SYS_DPAA_RMAN - [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), -#endif }; diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c index 94814ac13e..d86bb27372 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c @@ -8,68 +8,59 @@ #include <asm/fsl_serdes.h> #include <asm/processor.h> #include <asm/io.h> -#include "fsl_corenet2_serdes.h" -static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = { - { /* SerDes 1 */ - [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, - PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, PCIE4, SATA1}, + [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, SATA2, SATA1}, + [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE2, PCIE2, PCIE2}, [0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, PCIE2, PCIE3, PCIE4, SATA1}, [0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, - PCIE2, PCIE2, PCIE2, PCIE2}, - [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, - PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5}, - [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, - PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1}, + [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, [0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE3, PCIE4, SATA1}, + [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, [0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, - [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE2, PCIE2, PCIE2}, - [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE3, PCIE4, SATA1}, - [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE3, SATA2, SATA1}, + [0x89] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A, + PCIE2, PCIE3, QSGMII_SW1_B, SATA1}, + [0x8D] = {PCIE1, QSGMII_SW1_A, QSGMII_SW1_A, QSGMII_SW1_A, + PCIE2, QSGMII_SW1_B, QSGMII_SW1_B, QSGMII_SW1_B}, [0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, [0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, - [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, - PCIE2, PCIE2, PCIE2, PCIE2}, - }, - { - }, - { - }, - { - }, + [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, + [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, }; - enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) { - return serdes_cfg_tbl[serdes][cfg][lane]; + return serdes_cfg_tbl[cfg][lane]; } int is_serdes_prtcl_valid(int serdes, u32 prtcl) { int i; - if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl[serdes])) + if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; for (i = 0; i < SRDS_MAX_LANES; i++) { - if (serdes_cfg_tbl[serdes][prtcl][i] != NONE) + if (serdes_cfg_tbl[prtcl][i] != NONE) return 1; } diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index be1d9d2a67..56587aebc0 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -22,6 +22,9 @@ #define FSL_DDR_VER_4_7 47 #define FSL_DDR_VER_5_0 50 +/* IP endianness */ +#define CONFIG_SYS_FSL_IFC_BE + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -717,8 +720,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 404ded4580..f60cb0a6de 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -69,13 +69,7 @@ enum srds_prtcl { XFI_FM2_MAC9, XFI_FM2_MAC10, INTERLAKEN, - SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */ - SGMII_SW1_DTSEC2, - SGMII_SW1_DTSEC3, - SGMII_SW1_DTSEC4, - SGMII_SW1_DTSEC5, - SGMII_SW1_DTSEC6, - QSGMII_SW1_A, /* SW indicates on L2 swtich */ + QSGMII_SW1_A, /* Indicates ports on L2 Switch */ QSGMII_SW1_B, }; diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 68c3c82453..9d08321f5d 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1759,6 +1759,17 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#define FSL_CORENET_RCWSR13_EC1 0x30000000 /* bits 418..419 */ +#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM1_GPIO 0x10000000 +#define FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII 0x20000000 +#define FSL_CORENET_RCWSR13_EC2 0x0c000000 /* bits 420..421 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII 0x20000000 +#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL 0x00000080 +#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH 0x00000000 +#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT 0x80000000 #elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile index 93af9eb6a0..c7470d7cbb 100644 --- a/board/freescale/t1040qds/Makefile +++ b/board/freescale/t1040qds/Makefile @@ -9,3 +9,4 @@ obj-y += ddr.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o +obj-y += eth.o diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README index 6d380ae86d..8160ca0bc0 100644 --- a/board/freescale/t1040qds/README +++ b/board/freescale/t1040qds/README @@ -121,14 +121,14 @@ NOR Flash memory Map on T1040QDS 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c new file mode 100644 index 0000000000..3077b4ae2c --- /dev/null +++ b/board/freescale/t1040qds/eth.c @@ -0,0 +1,492 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * The RGMII PHYs are provided by the two on-board PHY connected to + * dTSEC instances 4 and 5. The SGMII PHYs are provided by one on-board + * PHY or by the standard four-port SGMII riser card (VSC). + */ + +#include <common.h> +#include <netdev.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" +#include "../common/qixis.h" + +#include "t1040qds_qixis.h" + +#ifdef CONFIG_FMAN_ENET + /* - In T1040 there are only 8 SERDES lanes, spread across 2 SERDES banks. + * Bank 1 -> Lanes A, B, C, D + * Bank 2 -> Lanes E, F, G, H + */ + + /* Mapping of 8 SERDES lanes to T1040 QDS board slots. A value of '0' here + * means that the mapping must be determined dynamically, or that the lane + * maps to something other than a board slot. + */ +static u8 lane_to_slot[] = { + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs + * housed. + */ +static int riser_phy_addr[] = { + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, +}; + +/* Slot2 does not have EMI connections */ +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII0 0 +#define EMI1_RGMII1 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT6 6 +#define EMI1_SLOT7 7 +#define EMI2 8 + +static int mdio_mux[NUM_FM_PORTS]; + +static const char * const mdio_names[] = { + "T1040_QDS_MDIO0", + "T1040_QDS_MDIO1", + "T1040_QDS_MDIO2", + "T1040_QDS_MDIO3", + "T1040_QDS_MDIO4", + "T1040_QDS_MDIO5", + "T1040_QDS_MDIO6", + "T1040_QDS_MDIO7", +}; + +struct t1040_qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static const char *t1040_qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = t1040_qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +static void t1040_qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if (muxval <= 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int t1040_qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct t1040_qds_mdio *priv = bus->priv; + + t1040_qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int t1040_qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct t1040_qds_mdio *priv = bus->priv; + + t1040_qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int t1040_qds_mdio_reset(struct mii_dev *bus) +{ + struct t1040_qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int t1040_qds_mdio_init(char *realbusname, u8 muxval) +{ + struct t1040_qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate t1040_qds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate t1040_qds private data\n"); + free(bus); + return -1; + } + + bus->read = t1040_qds_mdio_read; + bus->write = t1040_qds_mdio_write; + bus->reset = t1040_qds_mdio_reset; + sprintf(bus->name, t1040_qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +/* + * Initialize the lane_to_slot[] array. + * + * On the T1040QDS board the mapping is controlled by ?? register. + */ +static void initialize_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + int serdes1_prtcl = (in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL) + >> FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + QIXIS_WRITE(cms[0], 0x07); + + switch (serdes1_prtcl) { + case 0x60: + case 0x66: + case 0x67: + case 0x69: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + break; + case 0x86: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + break; + case 0x87: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[7] = 7; + break; + case 0x89: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[7] = 7; + break; + case 0x8d: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0x8F: + case 0x85: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xA5: + lane_to_slot[1] = 7; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xA7: + lane_to_slot[1] = 7; + lane_to_slot[7] = 7; + break; + case 0xAA: + lane_to_slot[1] = 7; + lane_to_slot[6] = 7; + lane_to_slot[7] = 7; + break; + case 0x40: + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + break; + default: + printf("qds: Fman: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} + +/* + * Given the following ... + * + * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' + * compatible string and 'addr' physical address) + * + * 2) An Fman port + * + * ... update the phy-handle property of the Ethernet node to point to the + * right PHY. This assumes that we already know the PHY for each port. + * + * The offset of the Fman Ethernet node is also passed in for convenience, but + * it is not used, and we recalculate the offset anyway. + * + * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. + * Inside the Fman, "ports" are things that connect to MACs. We only call them + * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs + * and ports are the same thing. + * + */ +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + phy_interface_t intf = fm_info_get_enet_if(port); + char phy[16]; + + /* The RGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_RGMII) { + sprintf(phy, "rgmii_phy%u", port == FM1_DTSEC4 ? 1 : 2); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + + /* The SGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_SGMII) { + int lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1 + + port); + u8 slot; + if (lane < 0) + return; + slot = lane_to_slot[lane]; + if (slot) { + /* Slot housing a SGMII riser card */ + sprintf(phy, "phy_s%x_%02x", slot, + (fm_info_get_phy_address(port - FM1_DTSEC1)- + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + 1)); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + } +} + +void fdt_fixup_board_enet(void *fdt) +{ + int i, lane, idx; + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + idx = i - FM1_DTSEC1; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + + switch (mdio_mux[i]) { + case EMI1_SLOT3: + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case EMI1_SLOT5: + fdt_status_okay_by_alias(fdt, "emi1_slot5"); + break; + case EMI1_SLOT6: + fdt_status_okay_by_alias(fdt, "emi1_slot6"); + break; + case EMI1_SLOT7: + fdt_status_okay_by_alias(fdt, "emi1_slot7"); + break; + } + break; + case PHY_INTERFACE_MODE_RGMII: + if (i == FM1_DTSEC4) + fdt_status_okay_by_alias(fdt, "emi1_rgmii0"); + + if (i == FM1_DTSEC5) + fdt_status_okay_by_alias(fdt, "emi1_rgmii1"); + break; + default: + break; + } + } +} +#endif /* #ifdef CONFIG_FMAN_ENET */ + +static void set_brdcfg9_for_gtx_clk(void) +{ + u8 brdcfg9; + brdcfg9 = QIXIS_READ(brdcfg[9]); + brdcfg9 |= (1 << 5); + QIXIS_WRITE(brdcfg[9], brdcfg9); +} + +void t1040_handle_phy_interface_sgmii(int i) +{ + int lane, idx, slot; + idx = i - FM1_DTSEC1; + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + + if (lane < 0) + return; + slot = lane_to_slot[lane]; + + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 3: + if (FM1_DTSEC4 == i) + fm_info_set_phy_address(i, riser_phy_addr[0]); + if (FM1_DTSEC5 == i) + fm_info_set_phy_address(i, riser_phy_addr[1]); + + mdio_mux[i] = EMI1_SLOT3; + + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 5: + /* Slot housing a SGMII riser card? */ + fm_info_set_phy_address(i, riser_phy_addr[0]); + mdio_mux[i] = EMI1_SLOT5; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 6: + /* Slot housing a SGMII riser card? */ + fm_info_set_phy_address(i, riser_phy_addr[0]); + mdio_mux[i] = EMI1_SLOT6; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 7: + if (FM1_DTSEC1 == i) + fm_info_set_phy_address(i, riser_phy_addr[0]); + if (FM1_DTSEC2 == i) + fm_info_set_phy_address(i, riser_phy_addr[1]); + if (FM1_DTSEC3 == i) + fm_info_set_phy_address(i, riser_phy_addr[2]); + + mdio_mux[i] = EMI1_SLOT7; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); +} +void t1040_handle_phy_interface_rgmii(int i) +{ + fm_info_set_phy_address(i, i == FM1_DTSEC5 ? + CONFIG_SYS_FM1_DTSEC5_PHY_ADDR : + CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + mdio_mux[i] = (i == FM1_DTSEC5) ? EMI1_RGMII1 : + EMI1_RGMII0; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); +} + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + + printf("Initializing Fman\n"); + set_brdcfg9_for_gtx_clk(); + + initialize_lane_to_slot(); + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII0); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); + + /* + * Program on board RGMII PHY addresses. If the SGMII Riser + * card used, we'll override the PHY address later. For any DTSEC that + * is RGMII, we'll also override its PHY address later. We assume that + * DTSEC4 and DTSEC5 are used for RGMII. + */ + fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR); + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_QSGMII: + break; + case PHY_INTERFACE_MODE_SGMII: + t1040_handle_phy_interface_sgmii(i); + break; + + case PHY_INTERFACE_MODE_RGMII: + /* Only DTSEC4 and DTSEC5 can be routed to RGMII */ + t1040_handle_phy_interface_rgmii(i); + break; + default: + break; + } + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index de3ea5c2aa..3dec4473e5 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -223,6 +223,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); #endif } diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index 76c0c94b0e..e51fb7a7f4 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -7,6 +7,7 @@ obj-y += t104xrdb.o obj-y += ddr.o +obj-y += eth.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index 11e03bd300..1da52bb0b0 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -164,14 +164,14 @@ NOR Flash memory Map 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c new file mode 100644 index 0000000000..0188fd4090 --- /dev/null +++ b/board/freescale/t104xrdb/eth.c @@ -0,0 +1,72 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + int phy_addr = 0; + printf("Initializing Fman\n"); + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* + * Program on board RGMII, SGMII PHY addresses. + */ + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { +#ifdef CONFIG_T1040RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1040RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); +#endif + case PHY_INTERFACE_MODE_RGMII: + if (FM1_DTSEC4 == i) + phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; + if (FM1_DTSEC5 == i) + phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; + fm_info_set_phy_address(i, phy_addr); + break; + case PHY_INTERFACE_MODE_QSGMII: + fm_info_set_phy_address(i, 0); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile index 3e69ee2f15..c57ca08e14 100644 --- a/board/keymile/kmp204x/Makefile +++ b/board/keymile/kmp204x/Makefile @@ -8,5 +8,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o \ +obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o qrio.o \ ../common/common.o ../common/ivm.o diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index f02642aece..95a19cdb2c 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -33,12 +33,51 @@ int checkboard(void) return 0; } -/* TODO: implement the I2C deblocking function */ -int i2c_make_abort(void) +/* I2C deblocking uses the algorithm defined in board/keymile/common/common.c + * 2 dedicated QRIO GPIOs externally pull the SCL and SDA lines + * For I2C only the low state is activly driven and high state is pulled-up + * by a resistor. Therefore the deblock GPIOs are used + * -> as an active output to drive a low state + * -> as an open-drain input to have a pulled-up high state + */ + +/* QRIO GPIOs used for deblocking */ +#define DEBLOCK_PORT1 GPIO_A +#define DEBLOCK_SCL1 20 +#define DEBLOCK_SDA1 21 + +/* By default deblock GPIOs are floating */ +static void i2c_deblock_gpio_cfg(void) +{ + /* set I2C bus 1 deblocking GPIOs input, but 0 value for open drain */ + qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SCL1); + qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SDA1); + + qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, 0); + qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, 0); +} + +void set_sda(int state) +{ + qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, state); +} + +void set_scl(int state) +{ + qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, state); +} + +int get_sda(void) +{ + return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1); +} + +int get_scl(void) { - return 1; + return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1); } + #define ZL30158_RST 8 #define ZL30343_RST 9 @@ -62,6 +101,7 @@ int board_early_init_f(void) int board_early_init_r(void) { + int ret = 0; /* Flush d-cache and invalidate i-cache of any FLASH data */ flush_dcache(); invalidate_icache(); @@ -69,7 +109,11 @@ int board_early_init_r(void) set_liodns(); setup_portals(); - return 0; + ret = trigger_fpga_config(); + if (ret) + printf("error triggering PCIe FPGA config\n"); + + return ret; } unsigned long get_board_sys_clk(unsigned long dummy) @@ -77,80 +121,12 @@ unsigned long get_board_sys_clk(unsigned long dummy) return 66666666; } -#define WDMASK_OFF 0x16 - -static void qrio_wdmask(u8 bit, bool wden) -{ - u16 wdmask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - wdmask = in_be16(qrio_base + WDMASK_OFF); - - if (wden) - wdmask |= (1 << bit); - else - wdmask &= ~(1 << bit); - - out_be16(qrio_base + WDMASK_OFF, wdmask); -} - -#define PRST_OFF 0x1a - -void qrio_prst(u8 bit, bool en, bool wden) -{ - u16 prst; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - qrio_wdmask(bit, wden); - - prst = in_be16(qrio_base + PRST_OFF); - - if (en) - prst &= ~(1 << bit); - else - prst |= (1 << bit); - - out_be16(qrio_base + PRST_OFF, prst); -} - -#define PRSTCFG_OFF 0x1c - -void qrio_prstcfg(u8 bit, u8 mode) -{ - u32 prstcfg; - u8 i; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - prstcfg = in_be32(qrio_base + PRSTCFG_OFF); - - for (i = 0; i < 2; i++) { - if (mode & (1<<i)) - set_bit(2*bit+i, &prstcfg); - else - clear_bit(2*bit+i, &prstcfg); - } - - out_be32(qrio_base + PRSTCFG_OFF, prstcfg); -} - - -#define BOOTCOUNT_OFF 0x12 - -void bootcount_store(ulong counter) +int misc_init_f(void) { - u8 val; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - val = (counter <= 255) ? (u8)counter : 255; - out_8(qrio_base + BOOTCOUNT_OFF, val); -} + /* configure QRIO pis for i2c deblocking */ + i2c_deblock_gpio_cfg(); -ulong bootcount_load(void) -{ - u8 val; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - val = in_8(qrio_base + BOOTCOUNT_OFF); - return val; + return 0; } #define NUM_SRDS_BANKS 2 diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h index b6ba672413..0267596e4e 100644 --- a/board/keymile/kmp204x/kmp204x.h +++ b/board/keymile/kmp204x/kmp204x.h @@ -5,6 +5,16 @@ * SPDX-License-Identifier: GPL-2.0+ */ +/* QRIO GPIO ports */ +#define GPIO_A 0x40 +#define GPIO_B 0x60 + +int qrio_get_gpio(u8 port_off, u8 gpio_nr); +void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val); +void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value); +void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value); +void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr); + #define PRSTCFG_POWUP_UNIT_CORE_RST 0x0 #define PRSTCFG_POWUP_UNIT_RST 0x1 #define PRSTCFG_POWUP_RST 0x3 diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg index f38dcf9c8c..9af8bd5b57 100644 --- a/board/keymile/kmp204x/pbi.cfg +++ b/board/keymile/kmp204x/pbi.cfg @@ -8,6 +8,16 @@ # #PBI commands +#Workaround for A-006559 needed for rev 2.0 of P2041 silicon +#Freescale's errarta sheet suggests it may be done with PBI +09000010 00000000 +09000014 00000000 +09000018 81d00000 +09021008 0000f000 +09021028 0000f000 +09021048 0000f000 +09021068 0000f000 +09000018 00000000 #Initialize CPC1 as 1MB SRAM 09010000 00200400 09138000 00000000 diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c index ec20c8afb4..a484eb5749 100644 --- a/board/keymile/kmp204x/pci.c +++ b/board/keymile/kmp204x/pci.c @@ -14,18 +14,103 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/fsl_serdes.h> +#include <asm/errno.h> #include "kmp204x.h" +#define PROM_SEL_L 11 +/* control the PROM_SEL_L signal*/ +static void toggle_fpga_eeprom_bus(bool cpu_own) +{ + qrio_gpio_direction_output(GPIO_A, PROM_SEL_L, !cpu_own); +} + +#define CONF_SEL_L 10 +#define FPGA_PROG_L 19 +#define FPGA_DONE 18 +#define FPGA_INIT_L 17 + +int trigger_fpga_config(void) +{ + int ret = 0, init_l; + /* approx 10ms */ + u32 timeout = 10000; + + /* make sure the FPGA_can access the EEPROM */ + toggle_fpga_eeprom_bus(false); + + /* assert CONF_SEL_L to be able to drive FPGA_PROG_L */ + qrio_gpio_direction_output(GPIO_A, CONF_SEL_L, 0); + + /* trigger the config start */ + qrio_gpio_direction_output(GPIO_A, FPGA_PROG_L, 0); + + /* small delay for INIT_L line */ + udelay(10); + + /* wait for FPGA_INIT to be asserted */ + do { + init_l = qrio_get_gpio(GPIO_A, FPGA_INIT_L); + if (timeout-- == 0) { + printf("FPGA_INIT timeout\n"); + ret = -EFAULT; + break; + } + udelay(10); + } while (init_l); + + /* deassert FPGA_PROG, config should start */ + qrio_set_gpio(GPIO_A, FPGA_PROG_L, 1); + + return ret; +} + +/* poll the FPGA_DONE signal and give the EEPROM back to the QorIQ */ +static int wait_for_fpga_config(void) +{ + int ret = 0, done; + /* approx 5 s */ + u32 timeout = 500000; + + printf("PCIe FPGA config:"); + do { + done = qrio_get_gpio(GPIO_A, FPGA_DONE); + if (timeout-- == 0) { + printf(" FPGA_DONE timeout\n"); + ret = -EFAULT; + goto err_out; + } + udelay(10); + } while (!done); + + printf(" done\n"); + +err_out: + /* deactive CONF_SEL and give the CPU conf EEPROM access */ + qrio_set_gpio(GPIO_A, CONF_SEL_L, 1); + toggle_fpga_eeprom_bus(true); + + return ret; +} + #define PCIE_SW_RST 14 +#define PEXHC_SW_RST 13 #define HOOPER_SW_RST 12 void pci_init_board(void) { + /* first wait for the PCIe FPGA to be configured + * it has been triggered earlier in board_early_init_r */ + int ret = wait_for_fpga_config(); + if (ret) + printf("error finishing PCIe FPGA config\n"); + qrio_prst(PCIE_SW_RST, false, false); + qrio_prst(PEXHC_SW_RST, false, false); qrio_prst(HOOPER_SW_RST, false, false); /* Hooper is not direcly PCIe capable */ mdelay(50); + fsl_pcie_init_board(0); } diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c new file mode 100644 index 0000000000..49f9aa2546 --- /dev/null +++ b/board/keymile/kmp204x/qrio.c @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2013 Keymile AG + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include "../common/common.h" +#include "kmp204x.h" + +/* QRIO GPIO register offsets */ +#define DIRECT_OFF 0x18 +#define GPRT_OFF 0x1c + +int qrio_get_gpio(u8 port_off, u8 gpio_nr) +{ + u32 gprt; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + gprt = in_be32(qrio_base + port_off + GPRT_OFF); + + return (gprt >> gpio_nr) & 1U; +} + +void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value) +{ + u32 gprt, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + gprt = in_be32(qrio_base + port_off + GPRT_OFF); + if (value) + gprt |= mask; + else + gprt &= ~mask; + + out_be32(qrio_base + port_off + GPRT_OFF, gprt); +} + +void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + direct |= mask; + out_be32(qrio_base + port_off + DIRECT_OFF, direct); + + qrio_set_gpio(port_off, gpio_nr, value); +} + +void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + direct &= ~mask; + out_be32(qrio_base + port_off + DIRECT_OFF, direct); +} + +void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + if (val == 0) + /* set to output -> GPIO drives low */ + direct |= mask; + else + /* set to input -> GPIO floating */ + direct &= ~mask; + + out_be32(qrio_base + port_off + DIRECT_OFF, direct); +} + +#define WDMASK_OFF 0x16 + +static void qrio_wdmask(u8 bit, bool wden) +{ + u16 wdmask; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + wdmask = in_be16(qrio_base + WDMASK_OFF); + + if (wden) + wdmask |= (1 << bit); + else + wdmask &= ~(1 << bit); + + out_be16(qrio_base + WDMASK_OFF, wdmask); +} + +#define PRST_OFF 0x1a + +void qrio_prst(u8 bit, bool en, bool wden) +{ + u16 prst; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + qrio_wdmask(bit, wden); + + prst = in_be16(qrio_base + PRST_OFF); + + if (en) + prst &= ~(1 << bit); + else + prst |= (1 << bit); + + out_be16(qrio_base + PRST_OFF, prst); +} + +#define PRSTCFG_OFF 0x1c + +void qrio_prstcfg(u8 bit, u8 mode) +{ + u32 prstcfg; + u8 i; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + prstcfg = in_be32(qrio_base + PRSTCFG_OFF); + + for (i = 0; i < 2; i++) { + if (mode & (1<<i)) + set_bit(2*bit+i, &prstcfg); + else + clear_bit(2*bit+i, &prstcfg); + } + + out_be32(qrio_base + PRSTCFG_OFF, prstcfg); +} diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg index f2b7fe3d42..2d4c48cb9c 100644 --- a/board/keymile/kmp204x/rcw_kmp204x.cfg +++ b/board/keymile/kmp204x/rcw_kmp204x.cfg @@ -7,5 +7,5 @@ aa55aa55 010e0100 #64 bytes RCW data 14600000 00000000 28200000 00000000 148E70CF CFC02000 58000000 41000000 -00000000 00000000 00000000 F4428002 +00000000 00000000 00000000 F0428002 00000000 00000000 00000000 00000000 diff --git a/boards.cfg b/boards.cfg index 2dfd2b479c..706ec96585 100644 --- a/boards.cfg +++ b/boards.cfg @@ -990,6 +990,7 @@ Active powerpc mpc85xx - gdsys p1022 Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER_DEVELOP controlcenterd:TRAILBLAZER,SPIFLASH,DEVELOP Dirk Eibach <eibach@gdsys.de> +Active powerpc mpc85xx - keymile kmp204x kmcoge4 kmp204x:KMCOGE4 Valentin Longchamp <valentin.longchamp@keymile.com> Active powerpc mpc85xx - keymile kmp204x kmlion1 kmp204x:KMLION1 Valentin Longchamp <valentin.longchamp@keymile.com> Active powerpc mpc85xx - stx stxgp3 stxgp3 - Dan Malek <dan@embeddedalley.com> Active powerpc mpc85xx - stx stxssa stxssa stxssa Dan Malek <dan@embeddedalley.com> diff --git a/common/cmd_pxe.c b/common/cmd_pxe.c index c27ec354cc..2bd572d646 100644 --- a/common/cmd_pxe.c +++ b/common/cmd_pxe.c @@ -445,6 +445,7 @@ struct pxe_label { char *append; char *initrd; char *fdt; + char *fdtdir; int ipappend; int attempted; int localboot; @@ -517,6 +518,9 @@ static void label_destroy(struct pxe_label *label) if (label->fdt) free(label->fdt); + if (label->fdtdir) + free(label->fdtdir); + free(label); } @@ -675,13 +679,67 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) bootm_argv[3] = getenv("fdt_addr_r"); /* if fdt label is defined then get fdt from server */ - if (bootm_argv[3] && label->fdt) { - if (get_relfile_envaddr(cmdtp, label->fdt, "fdt_addr_r") < 0) { - printf("Skipping %s for failure retrieving fdt\n", - label->name); - return 1; + if (bootm_argv[3]) { + char *fdtfile = NULL; + char *fdtfilefree = NULL; + + if (label->fdt) { + fdtfile = label->fdt; + } else if (label->fdtdir) { + fdtfile = getenv("fdtfile"); + /* + * For complex cases, it might be worth calling a + * board- or SoC-provided function here to provide a + * better default: + * + * if (!fdtfile) + * fdtfile = gen_fdtfile(); + * + * If this is added, be sure to keep the default below, + * or move it to the default weak implementation of + * gen_fdtfile(). + */ + if (!fdtfile) { + char *soc = getenv("soc"); + char *board = getenv("board"); + char *slash; + + len = strlen(label->fdtdir); + if (!len) + slash = "./"; + else if (label->fdtdir[len - 1] != '/') + slash = "/"; + else + slash = ""; + + len = strlen(label->fdtdir) + strlen(slash) + + strlen(soc) + 1 + strlen(board) + 5; + fdtfilefree = malloc(len); + if (!fdtfilefree) { + printf("malloc fail (FDT filename)\n"); + return 1; + } + + snprintf(fdtfilefree, len, "%s%s%s-%s.dtb", + label->fdtdir, slash, soc, board); + fdtfile = fdtfilefree; + } } - } else + + if (fdtfile) { + int err = get_relfile_envaddr(cmdtp, fdtfile, "fdt_addr_r"); + free(fdtfilefree); + if (err < 0) { + printf("Skipping %s for failure retrieving fdt\n", + label->name); + return 1; + } + } else { + bootm_argv[3] = NULL; + } + } + + if (!bootm_argv[3]) bootm_argv[3] = getenv("fdt_addr"); if (bootm_argv[3]) @@ -716,6 +774,7 @@ enum token_type { T_PROMPT, T_INCLUDE, T_FDT, + T_FDTDIR, T_ONTIMEOUT, T_IPAPPEND, T_INVALID @@ -745,7 +804,10 @@ static const struct token keywords[] = { {"append", T_APPEND}, {"initrd", T_INITRD}, {"include", T_INCLUDE}, + {"devicetree", T_FDT}, {"fdt", T_FDT}, + {"devicetreedir", T_FDTDIR}, + {"fdtdir", T_FDTDIR}, {"ontimeout", T_ONTIMEOUT,}, {"ipappend", T_IPAPPEND,}, {NULL, T_INVALID} @@ -1134,6 +1196,11 @@ static int parse_label(char **c, struct pxe_menu *cfg) err = parse_sliteral(c, &label->fdt); break; + case T_FDTDIR: + if (!label->fdtdir) + err = parse_sliteral(c, &label->fdtdir); + break; + case T_LOCALBOOT: label->localboot = 1; err = parse_integer(c, &label->localboot_val); diff --git a/doc/README.b4860qds b/doc/README.b4860qds index f8a79dbb25..3da77d9f0f 100644 --- a/doc/README.b4860qds +++ b/doc/README.b4860qds @@ -230,14 +230,14 @@ NOR Flash memory Map on B4860 and B4420QDS 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xEF300000 0xEFF3FFFF rootfs (alternate bank) 12MB + 256KB +0xEF300000 0xEFEFFFFF rootfs (alternate bank) 12MB 0xEE800000 0xEE8FFFFF device tree (alternate bank) 1MB 0xEE020000 0xEE6FFFFF Linux.uImage (alternate bank) 6MB+896KB 0xEE000000 0xEE01FFFF RCW (alternate bank) 128KB 0xEDF40000 0xEDFFFFFF u-boot (alternate bank) 768KB 0xEDF20000 0xEDF3FFFF u-boot env (alternate bank) 128KB 0xEDF00000 0xEDF1FFFF FMAN ucode (alternate bank) 128KB -0xED300000 0xEDF3FFFF rootfs (current bank) 12MB+256MB +0xED300000 0xEDEFFFFF rootfs (current bank) 12MB 0xEC800000 0xEC8FFFFF device tree (current bank) 1MB 0xEC020000 0xEC6FFFFF Linux.uImage (current bank) 6MB+896KB 0xEC000000 0xEC01FFFF RCW (current bank) 128KB diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 1808a7ffba..be5a16a1ba 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -230,8 +230,8 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) ctrl->page = page_addr; /* Program ROW0/COL0 */ - out_be32(&ifc->ifc_nand.row0, page_addr); - out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column); + ifc_out32(&ifc->ifc_nand.row0, page_addr); + ifc_out32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column); buf_num = page_addr & priv->bufnum_mask; @@ -294,23 +294,23 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) int i; /* set the chip select for NAND Transaction */ - out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); + ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); /* start read/write seq */ - out_be32(&ifc->ifc_nand.nandseq_strt, - IFC_NAND_SEQ_STRT_FIR_STRT); + ifc_out32(&ifc->ifc_nand.nandseq_strt, + IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for NAND Machine complete flag or timeout */ end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); while (end_tick > get_ticks()) { - ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat); + ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); if (ctrl->status & IFC_NAND_EVTER_STAT_OPC) break; } - out_be32(&ifc->ifc_nand.nand_evter_stat, ctrl->status); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, ctrl->status); if (ctrl->status & IFC_NAND_EVTER_STAT_FTOER) printf("%s: Flash Time Out Error\n", __func__); @@ -324,7 +324,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) int sector_end = sector + chip->ecc.steps - 1; for (i = sector / 4; i <= sector_end / 4; i++) - eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]); + eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]); for (i = sector; i <= sector_end; i++) { errors = check_read_ecc(mtd, ctrl, eccstat, i); @@ -364,30 +364,30 @@ static void fsl_ifc_do_read(struct nand_chip *chip, /* Program FIR/IFC_NAND_FCR0 for Small/Large page */ if (mtd->writesize > 512) { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); + + ifc_out32(&ifc->ifc_nand.nand_fcr0, + (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); } else { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT)); if (oob) - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT); else - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); } } @@ -408,7 +408,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, switch (command) { /* READ0 read the entire buffer to use hardware ECC. */ case NAND_CMD_READ0: { - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); set_addr(mtd, 0, page_addr, 0); ctrl->read_bytes = mtd->writesize + mtd->oobsize; @@ -424,7 +424,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* READOOB reads only the OOB because no ECC is performed. */ case NAND_CMD_READOOB: - out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column); + ifc_out32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column); set_addr(mtd, column, page_addr, 1); ctrl->read_bytes = mtd->writesize + mtd->oobsize; @@ -441,19 +441,19 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (command == NAND_CMD_PARAM) timing = IFC_FIR_OP_RBCD; - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (timing << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - command << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.row3, column); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (timing << IFC_NAND_FIR0_OP2_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + command << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.row3, column); /* * although currently it's 8 bytes for READID, we always read * the maximum 256 bytes(for PARAM) */ - out_be32(&ifc->ifc_nand.nand_fbcr, 256); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 256); ctrl->read_bytes = 256; set_addr(mtd, 0, 0, 0); @@ -468,16 +468,16 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* ERASE2 uses the block and page address from ERASE1 */ case NAND_CMD_ERASE2: - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); ctrl->read_bytes = 0; fsl_ifc_run_command(mtd); return; @@ -494,17 +494,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT); - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | - (IFC_FIR_OP_RDSTAT << + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_WBCD << + IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, + (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP6_SHIFT) | - (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT)); + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT)); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | @@ -513,18 +514,18 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD3_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | - (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | - (IFC_FIR_OP_RDSTAT << + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP7_SHIFT) | - (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT)); + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT)); if (column >= mtd->writesize) nand_fcr0 |= @@ -539,7 +540,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, column -= mtd->writesize; ctrl->oob = 1; } - out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0); + ifc_out32(&ifc->ifc_nand.nand_fcr0, nand_fcr0); set_addr(mtd, column, page_addr, ctrl->oob); return; } @@ -547,21 +548,21 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, /* PAGEPROG reuses all of the setup from SEQIN and adds the length */ case NAND_CMD_PAGEPROG: if (ctrl->oob) - out_be32(&ifc->ifc_nand.nand_fbcr, - ctrl->index - ctrl->column); + ifc_out32(&ifc->ifc_nand.nand_fbcr, + ctrl->index - ctrl->column); else - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); fsl_ifc_run_command(mtd); return; case NAND_CMD_STATUS: - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fbcr, 1); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 1); set_addr(mtd, 0, 0, 0); ctrl->read_bytes = 1; @@ -572,10 +573,10 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, return; case NAND_CMD_RESET: - out_be32(&ifc->ifc_nand.nand_fir0, - IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fir0, + IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT); fsl_ifc_run_command(mtd); return; @@ -647,8 +648,8 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd) * next byte. */ if (ctrl->index < ctrl->read_bytes) { - data = in_be16((uint16_t *)&ctrl-> - addr[ctrl->index]); + data = ifc_in16((uint16_t *)&ctrl-> + addr[ctrl->index]); ctrl->index += 2; return (uint8_t)data; } @@ -727,12 +728,12 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) return NAND_STATUS_FAIL; /* Use READ_STATUS command, but wait for the device to be ready */ - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS << - IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.nand_fbcr, 1); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS << + IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 1); set_addr(mtd, 0, 0, 0); ctrl->read_bytes = 1; @@ -741,7 +742,7 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) if (ctrl->status != IFC_NAND_EVTER_STAT_OPC) return NAND_STATUS_FAIL; - nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr); + nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr); /* Chip sometimes reporting write protect even when it's not */ nand_fsr = nand_fsr | NAND_STATUS_WP; @@ -784,17 +785,17 @@ static void fsl_ifc_ctrl_init(void) ifc_ctrl->regs = IFC_BASE_ADDR; /* clear event registers */ - out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U); - out_be32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U); + ifc_out32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U); + ifc_out32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U); /* Enable error and event for any detected errors */ - out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_en, - IFC_NAND_EVTER_EN_OPC_EN | - IFC_NAND_EVTER_EN_PGRDCMPL_EN | - IFC_NAND_EVTER_EN_FTOER_EN | - IFC_NAND_EVTER_EN_WPER_EN); + ifc_out32(&ifc_ctrl->regs->ifc_nand.nand_evter_en, + IFC_NAND_EVTER_EN_OPC_EN | + IFC_NAND_EVTER_EN_PGRDCMPL_EN | + IFC_NAND_EVTER_EN_FTOER_EN | + IFC_NAND_EVTER_EN_WPER_EN); - out_be32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0); + ifc_out32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0); } static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip) @@ -810,50 +811,50 @@ static void fsl_ifc_sram_init(void) cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT; /* Save CSOR and CSOR_ext */ - csor = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor); - csor_ext = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext); + csor = ifc_in32(&ifc_ctrl->regs->csor_cs[cs].csor); + csor_ext = ifc_in32(&ifc_ctrl->regs->csor_cs[cs].csor_ext); /* chage PageSize 8K and SpareSize 1K*/ csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000; - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k); - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400); /* READID */ - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); - out_be32(&ifc->ifc_nand.row3, 0x0); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.row3, 0x0); - out_be32(&ifc->ifc_nand.nand_fbcr, 0x0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0x0); /* Program ROW0/COL0 */ - out_be32(&ifc->ifc_nand.row0, 0x0); - out_be32(&ifc->ifc_nand.col0, 0x0); + ifc_out32(&ifc->ifc_nand.row0, 0x0); + ifc_out32(&ifc->ifc_nand.col0, 0x0); /* set the chip select for NAND Transaction */ - out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); + ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); /* start read seq */ - out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); + ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for NAND Machine complete flag or timeout */ end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); while (end_tick > get_ticks()) { - ifc_ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat); + ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC) break; } - out_be32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status); /* Restore CSOR and CSOR_ext */ - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor); - out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor); + ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext); } static int fsl_ifc_chip_init(int devnum, u8 *addr) @@ -883,8 +884,8 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) { phys_addr_t phys_addr = virt_to_phys(addr); - cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr); - csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor); + cspr = ifc_in32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr); + csor = ifc_in32(&ifc_ctrl->regs->csor_cs[priv->bank].csor); if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND && (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) { @@ -1004,7 +1005,7 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) nand->ecc.mode = NAND_ECC_SOFT; } - ver = in_be32(&ifc_ctrl->regs->ifc_rev); + ver = ifc_in32(&ifc_ctrl->regs->ifc_rev); if (ver == FSL_IFC_V1_1_0) fsl_ifc_sram_init(); diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index 6b43496f0e..2f82f7c5c6 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -60,7 +60,7 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size) bufnum_end = bufnum + bufperpage - 1; do { - status = in_be32(&ifc->ifc_nand.nand_evter_stat); + status = ifc_in32(&ifc->ifc_nand.nand_evter_stat); } while (!(status & IFC_NAND_EVTER_STAT_OPC)); if (status & IFC_NAND_EVTER_STAT_FTOER) { @@ -70,14 +70,14 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size) } for (i = bufnum / 4; i <= bufnum_end / 4; i++) - eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]); + eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]); for (i = bufnum; i <= bufnum_end; i++) { if (check_read_ecc(buf, eccstat, i, page_size)) break; } - out_be32(&ifc->ifc_nand.nand_evter_stat, status); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, status); } static inline int bad_block(uchar *marker, int port_size) @@ -140,38 +140,38 @@ static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst) blk_size = pages_per_blk * page_size; /* Open Full SRAM mapping for spare are access */ - out_be32(&ifc->ifc_nand.ncfgr, 0x0); + ifc_out32(&ifc->ifc_nand.ncfgr, 0x0); /* Clear Boot events */ - out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff); + ifc_out32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff); /* Program FIR/FCR for Large/Small page */ if (page_size > 512) { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) | + (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); + + ifc_out32(&ifc->ifc_nand.nand_fcr0, + (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) | + (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT)); } else { - out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | - (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | - (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | - (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0x0); - - out_be32(&ifc->ifc_nand.nand_fcr0, - NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); + ifc_out32(&ifc->ifc_nand.nand_fir0, + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | + (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | + (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT)); + ifc_out32(&ifc->ifc_nand.nand_fir1, 0x0); + + ifc_out32(&ifc->ifc_nand.nand_fcr0, + NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT); } /* Program FBCR = 0 for full page read */ - out_be32(&ifc->ifc_nand.nand_fbcr, 0); + ifc_out32(&ifc->ifc_nand.nand_fbcr, 0); /* Read and copy u-boot on SDRAM from NAND device, In parallel * check for Bad block if found skip it and read continue to @@ -184,11 +184,11 @@ static int nand_load(uint32_t offs, unsigned int uboot_size, void *vdst) bufnum = pg_no & bufnum_mask; sram_addr = bufnum * page_size * 2; - out_be32(&ifc->ifc_nand.row0, pg_no); - out_be32(&ifc->ifc_nand.col0, 0); + ifc_out32(&ifc->ifc_nand.row0, pg_no); + ifc_out32(&ifc->ifc_nand.col0, 0); /* start read */ - out_be32(&ifc->ifc_nand.nandseq_strt, - IFC_NAND_SEQ_STRT_FIR_STRT); + ifc_out32(&ifc->ifc_nand.nandseq_strt, + IFC_NAND_SEQ_STRT_FIR_STRT); /* wait for read to complete */ nand_wait(&buf[sram_addr], bufnum, page_size); diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c index 83cf081f3d..bcc871d842 100644 --- a/drivers/net/fm/t1040.c +++ b/drivers/net/fm/t1040.c @@ -12,5 +12,61 @@ phy_interface_t fman_port_enet_if(enum fm_port port) { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + /* handle RGMII first */ + if ((port == FM1_DTSEC2) && + ((rcwsr13 & FSL_CORENET_RCWSR13_MAC2_GMII_SEL) == + FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT)) { + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII) + return PHY_INTERFACE_MODE_RGMII; + else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII) + return PHY_INTERFACE_MODE_MII; + else + return PHY_INTERFACE_MODE_NONE; + } + + if ((port == FM1_DTSEC4) && + ((rcwsr13 & FSL_CORENET_RCWSR13_MAC2_GMII_SEL) == + FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH)) { + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_RGMII) + return PHY_INTERFACE_MODE_RGMII; + else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII) + return PHY_INTERFACE_MODE_MII; + else + return PHY_INTERFACE_MODE_NONE; + } + + if (port == FM1_DTSEC5) { + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII) + return PHY_INTERFACE_MODE_RGMII; + else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII) + return PHY_INTERFACE_MODE_MII; + else + return PHY_INTERFACE_MODE_NONE; + } + + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + if (is_serdes_configured(QSGMII_SW1_A + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_QSGMII; + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + return PHY_INTERFACE_MODE_NONE; } diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 2085cd6b9b..6317fb1324 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -510,8 +510,8 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* Print the negotiated PCIe link width */ pci_hose_read_config_word(hose, dev, pci_lsr, &temp16); - printf("x%d, regs @ 0x%lx\n", (temp16 & 0x3f0 ) >> 4, - pci_info->regs); + printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, + (temp16 & 0xf), pci_info->regs); hose->current_busno++; /* Start scan with secondary */ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 8234a828dd..75ea125f53 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -611,9 +611,8 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 -#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 +#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 5e988c254c..7cfda50c8c 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -79,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -202,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -386,6 +383,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -543,13 +544,12 @@ #endif #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -627,9 +627,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index aafa8139b1..ed9ca8a3e1 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -79,10 +79,6 @@ #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_EXTRA_ENV_RELOC #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 @@ -202,6 +198,7 @@ /* CPLD on IFC */ #define CONFIG_SYS_CPLD_BASE 0xffdf0000 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2_EXT (0xf) #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ @@ -394,6 +391,10 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 /* * General PCI @@ -551,8 +552,11 @@ #endif #ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 +#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 + #define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif @@ -631,9 +635,9 @@ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ - "bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 2a15ad469b..a4e0f7cf68 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -99,11 +99,16 @@ #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */ +#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS +#define CONFIG_KM_UBI_PART_BOOT_OPTS "" +#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */ + #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP /* one flash chip only called boot */ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0" #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */ @@ -111,7 +116,8 @@ /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */ /* app: CONFIG_KM_UBI_PARTITION_NAME_APP */ # define CONFIG_KM_UBI_LINUX_MTD \ - "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " " \ + "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT \ + CONFIG_KM_UBI_PART_BOOT_OPTS " " \ "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI \ "ubiattach=if test ${boot_bank} -eq 0; then; " \ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 2466649b15..b9e1bacfa7 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -15,6 +15,10 @@ #define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" +/* an additionnal option is required for UBI as subpage access is + * supported in u-boot */ +#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" + #define CONFIG_NAND_ECC_BCH /* common KM defines */ @@ -148,8 +152,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ #define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ -#define CONFIG_BOOTCOUNT_LIMIT - /* * Local Bus Definitions */ @@ -206,8 +208,13 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ +/* bootcounter in QRIO */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20) + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT @@ -263,7 +270,10 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ /* I2C */ + #define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ #define CONFIG_SYS_NUM_I2C_BUSES 3 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ @@ -276,6 +286,12 @@ unsigned long get_board_sys_clk(unsigned long dummy); {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ } +#ifndef __ASSEMBLY__ +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#endif #define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ @@ -286,6 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index 4158c8dd0f..8bb3571691 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -13,6 +13,11 @@ #define CONFIG_HOSTNAME kmlion1 #define CONFIG_KM_BOARD_NAME "kmlion1" +/* KMCOGE4 */ +#elif defined(CONFIG_KMCOGE4) +#define CONFIG_HOSTNAME kmcoge4 +#define CONFIG_KM_BOARD_NAME "kmcoge4" + #else #error ("Board not supported") #endif @@ -42,6 +47,7 @@ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM /* Local bus app1 Options */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM +#endif /* App2 Local bus */ #define CONFIG_SYS_LBAPP2_BASE 0xE0000000 @@ -63,6 +69,5 @@ #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM /* Local bus app2 Options */ #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM -#endif #endif /* __CONFIG_H */ diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index be6c10715b..58a6efdfe0 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -12,6 +12,20 @@ #include <config.h> #include <common.h> + +#ifdef CONFIG_SYS_FSL_IFC_LE +#define ifc_in32(a) in_le32(a) +#define ifc_out32(a, v) out_le32(a, v) +#define ifc_in16(a) in_le16(a) +#elif defined(CONFIG_SYS_FSL_IFC_BE) +#define ifc_in32(a) in_be32(a) +#define ifc_out32(a, v) out_be32(a, v) +#define ifc_in16(a) in_be16(a) +#else +#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined +#endif + + /* * CSPR - Chip Select Property Register */ @@ -773,20 +787,22 @@ extern void init_early_memctl_regs(void); #define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR) -#define get_ifc_cspr_ext(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) -#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) -#define get_ifc_csor_ext(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) -#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) -#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) -#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) - -#define set_ifc_cspr_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) -#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) -#define set_ifc_csor_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) -#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) -#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) +#define get_ifc_cspr_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext)) +#define get_ifc_cspr(i) (ifc_in32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) +#define get_ifc_csor_ext(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext)) +#define get_ifc_csor(i) (ifc_in32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) +#define get_ifc_amask(i) (ifc_in32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) +#define get_ifc_ftim(i, j) (ifc_in32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) + +#define set_ifc_cspr_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v)) +#define set_ifc_cspr(i, v) (ifc_out32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) +#define set_ifc_csor_ext(i, v) \ + (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v)) +#define set_ifc_csor(i, v) (ifc_out32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) +#define set_ifc_amask(i, v) (ifc_out32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) #define set_ifc_ftim(i, j, v) \ - (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) + (ifc_out32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) enum ifc_chip_sel { IFC_CS0, |