diff options
-rw-r--r-- | arch/arm/cpu/armv7/omap5/hw_data.c | 97 | ||||
-rw-r--r-- | arch/arm/include/asm/omap_common.h | 4 |
2 files changed, 101 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index e0ee23f3d1..bec6539ef5 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -622,6 +622,103 @@ void disable_edma3_clocks(void) } #endif +#ifdef CONFIG_USB_DWC3 +void enable_usb_clocks(int index) +{ + u32 cm_l3init_usb_otg_ss_clkctrl = 0; + + if (index == 0) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; + /* Enable 960 MHz clock for dwc3 */ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Enable 32 KHz clock for dwc3 */ + setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + } else if (index == 1) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; + /* Enable 960 MHz clock for dwc3 */ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Enable 32 KHz clock for dwc3 */ + setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + + /* Enable 60 MHz clock for USB2PHY2 */ + setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, + L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); + } + + u32 const clk_domains_usb[] = { + 0 + }; + + u32 const clk_modules_hw_auto_usb[] = { + (*prcm)->cm_l3init_ocp2scp1_clkctrl, + cm_l3init_usb_otg_ss_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_usb[] = { + 0 + }; + + do_enable_clocks(clk_domains_usb, + clk_modules_hw_auto_usb, + clk_modules_explicit_en_usb, + 1); +} + +void disable_usb_clocks(int index) +{ + u32 cm_l3init_usb_otg_ss_clkctrl = 0; + + if (index == 0) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; + /* Disable 960 MHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Disable 32 KHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + } else if (index == 1) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; + /* Disable 960 MHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Disable 32 KHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + + /* Disable 60 MHz clock for USB2PHY2 */ + clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, + L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); + } + + u32 const clk_domains_usb[] = { + 0 + }; + + u32 const clk_modules_disable[] = { + (*prcm)->cm_l3init_ocp2scp1_clkctrl, + cm_l3init_usb_otg_ss_clkctrl, + 0 + }; + + do_disable_clocks(clk_domains_usb, + clk_modules_disable, + 1); +} +#endif + const struct ctrl_ioregs ioregs_omap5430 = { .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 37117e2827..81f1616ec0 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -592,6 +592,10 @@ u32 omap_ddr_clk(void); u32 get_sys_clk_index(void); void enable_basic_clocks(void); void enable_basic_uboot_clocks(void); + +void enable_usb_clocks(int index); +void disable_usb_clocks(int index); + void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); |