diff options
1971 files changed, 15626 insertions, 9387 deletions
diff --git a/.travis.yml b/.travis.yml index 7b9ec1eb5a..ea560b9360 100644 --- a/.travis.yml +++ b/.travis.yml @@ -264,6 +264,15 @@ matrix: BUILDMAN="^sandbox$" TOOLCHAIN="x86_64" - env: + - TEST_PY_BD="sandbox_spl" + TEST_PY_TEST_SPEC="test_ofplatdata" + BUILDMAN="^sandbox$" + TOOLCHAIN="x86_64" + - env: + - TEST_PY_BD="sandbox_flattree" + BUILDMAN="^sandbox_flattree$" + TOOLCHAIN="x86_64" + - env: - TEST_PY_BD="vexpress_ca15_tc2" TEST_PY_ID="--id qemu" QEMU_TARGET="arm-softmmu" @@ -96,7 +96,17 @@ config SYS_MALLOC_F_LEN initial serial device and any others that are needed. config SPL_SYS_MALLOC_F_LEN - hex "Size of malloc() pool in spl before relocation" + hex "Size of malloc() pool in SPL before relocation" + depends on SYS_MALLOC_F + default SYS_MALLOC_F_LEN + help + Before relocation, memory is very limited on many platforms. Still, + we can provide a small malloc() pool if needed. Driver model in + particular needs this to operate, so that it can allocate the + initial serial device and any others that are needed. + +config TPL_SYS_MALLOC_F_LEN + hex "Size of malloc() pool in TPL before relocation" depends on SYS_MALLOC_F default SYS_MALLOC_F_LEN help @@ -370,6 +380,8 @@ source "disk/Kconfig" source "dts/Kconfig" +source "env/Kconfig" + source "net/Kconfig" source "drivers/Kconfig" @@ -5,7 +5,7 @@ VERSION = 2017 PATCHLEVEL = 09 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = # *DOCUMENTATION* @@ -690,6 +690,7 @@ libs-y += drivers/usb/phy/ libs-y += drivers/usb/ulpi/ libs-y += cmd/ libs-y += common/ +libs-y += env/ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ libs-y += test/ @@ -1400,7 +1401,8 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE spl/u-boot-spl.bin: spl/u-boot-spl @: spl/u-boot-spl: tools prepare \ - $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) + $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \ + $(if $(CONFIG_OF_SEPARATE)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb) $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all spl/sunxi-spl.bin: spl/u-boot-spl @@ -1463,14 +1465,14 @@ checkarmreloc: u-boot false; \ fi -env: scripts_basic +environ: scripts_basic $(Q)$(MAKE) $(build)=tools/$@ tools-only: scripts_basic $(version_h) $(timestamp_h) $(Q)$(MAKE) $(build)=tools tools-all: export HOST_TOOLS_ALL=y -tools-all: env tools ; +tools-all: environ tools ; cross_tools: export CROSS_BUILD_TOOLS=y cross_tools: tools ; @@ -699,11 +699,6 @@ The following options need to be configured: when no character is read on the console interface within "Boot Delay" after reset. - CONFIG_BOOTARGS - This can be used to pass arguments to the bootm - command. The value of CONFIG_BOOTARGS goes into the - environment value "bootargs". - CONFIG_RAMBOOT and CONFIG_NFSBOOT The value of these goes into the environment as "ramboot" and "nfsboot" respectively, and can be used @@ -756,111 +751,6 @@ The following options need to be configured: Select one of the baudrates listed in CONFIG_SYS_BAUDRATE_TABLE, see below. -- Monitor Functions: - Monitor commands can be included or excluded - from the build by using the #include files - <config_cmd_all.h> and #undef'ing unwanted - commands, or adding #define's for wanted commands. - - The default command configuration includes all commands - except those marked below with a "*". - - CONFIG_CMD_AES AES 128 CBC encrypt/decrypt - CONFIG_CMD_ASKENV * ask for env variable - CONFIG_CMD_BDI bdinfo - CONFIG_CMD_BOOTD bootd - CONFIG_CMD_BOOTI * ARM64 Linux kernel Image support - CONFIG_CMD_CACHE * icache, dcache - CONFIG_CMD_CONSOLE coninfo - CONFIG_CMD_DHCP * DHCP support - CONFIG_CMD_DIAG * Diagnostics - CONFIG_CMD_ECHO echo arguments - CONFIG_CMD_EDITENV edit env variable - CONFIG_CMD_ELF * bootelf, bootvx - CONFIG_CMD_ENV_EXISTS * check existence of env variable - CONFIG_CMD_EXPORTENV * export the environment - CONFIG_CMD_EXT2 * ext2 command support - CONFIG_CMD_EXT4 * ext4 command support - CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls) - that work for multiple fs types - CONFIG_CMD_FS_UUID * Look up a filesystem UUID - CONFIG_CMD_SAVEENV saveenv - CONFIG_CMD_FLASH flinfo, erase, protect - CONFIG_CMD_FPGA FPGA device initialization support - CONFIG_CMD_GO * the 'go' command (exec code) - CONFIG_CMD_GREPENV * search environment - CONFIG_CMD_I2C * I2C serial bus support - CONFIG_CMD_IMI iminfo - CONFIG_CMD_IMLS List all images found in NOR flash - CONFIG_CMD_IMLS_NAND * List all images found in NAND flash - CONFIG_CMD_IMPORTENV * import an environment - CONFIG_CMD_INI * import data from an ini file into the env - CONFIG_CMD_ITEST Integer/string test of 2 values - CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader) - CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration - (169.254.*.*) - CONFIG_CMD_LOADB loadb - CONFIG_CMD_LOADS loads - CONFIG_CMD_MD5SUM * print md5 message digest - (requires CONFIG_CMD_MEMORY and CONFIG_MD5) - CONFIG_CMD_MEMINFO * Display detailed memory information - CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, loopw - CONFIG_CMD_MEMTEST * mtest - CONFIG_CMD_MISC Misc functions like sleep etc - CONFIG_CMD_MMC * MMC memory mapped support - CONFIG_CMD_MII * MII utility commands - CONFIG_CMD_NET bootp, tftpboot, rarpboot - CONFIG_CMD_NFS NFS support - CONFIG_CMD_PCA953X * PCA953x I2C gpio commands - CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command - CONFIG_CMD_PCI * pciinfo - CONFIG_CMD_PCMCIA * PCMCIA support - CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network - host - CONFIG_CMD_PORTIO * Port I/O - CONFIG_CMD_READ * Read raw data from partition - CONFIG_CMD_REGINFO * Register dump - CONFIG_CMD_RUN run command in env variable - CONFIG_CMD_SANDBOX * sb command to access sandbox features - CONFIG_CMD_SAVES * save S record dump - CONFIG_CMD_SDRAM * print SDRAM configuration information - (requires CONFIG_CMD_I2C) - CONFIG_CMD_SF * Read/write/erase SPI NOR flash - CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x - CONFIG_CMD_SOURCE "source" command Support - CONFIG_CMD_SPI * SPI serial bus support - CONFIG_CMD_TFTPSRV * TFTP transfer in server mode - CONFIG_CMD_TFTPPUT * TFTP put command (upload) - CONFIG_CMD_TIME * run command and report execution time (ARM specific) - CONFIG_CMD_TIMER * access to the system tick timer - CONFIG_CMD_USB * USB support - CONFIG_CMD_CDP * Cisco Discover Protocol support - CONFIG_CMD_MFSL * Microblaze FSL support - CONFIG_CMD_XIMG Load part of Multi Image - CONFIG_CMD_UUID * Generate random UUID or GUID string - - EXAMPLE: If you want all functions except of network - support you can write: - - #include "config_cmd_all.h" - #undef CONFIG_CMD_NET - - Other Commands: - fdt (flattened device tree) command: CONFIG_OF_LIBFDT - - Note: Don't enable the "icache" and "dcache" commands - (configuration option CONFIG_CMD_CACHE) unless you know - what you (and your U-Boot users) are doing. Data - cache cannot be enabled on systems like the - 8xx (where accesses to the IMMR region must be - uncached), and it cannot be disabled on all other - systems where we (mis-) use the data cache to hold an - initial stack and some data. - - - XXX - this list needs to get updated! - - Removal of commands If no commands are needed to boot, you can disable CONFIG_CMDLINE to remove them. In this case, the command line @@ -1062,10 +952,6 @@ The following options need to be configured: Allow generic access to the SPI bus on the Intel 8257x, for example with the "sspi" command. - CONFIG_CMD_E1000 - Management command for E1000 devices. When used on devices - with SPI support you can reprogram the EEPROM from U-Boot. - CONFIG_EEPRO100 Support for Intel 82557/82559/82559ER chips. Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM @@ -1200,11 +1086,6 @@ The following options need to be configured: to. Contemporary x86 systems usually map it at 0xfed40000. - CONFIG_CMD_TPM - Add tpm monitor functions. - Requires CONFIG_TPM. If CONFIG_TPM_AUTH_SESSIONS is set, also - provides monitor access to authorized functions. - CONFIG_TPM Define this to enable the TPM support library which provides functional interfaces to some TPM commands. @@ -1332,12 +1213,6 @@ The following options need to be configured: CONFIG_USB_FUNCTION_DFU This enables the USB portion of the DFU USB class - CONFIG_CMD_DFU - This enables the command "dfu" which is used to have - U-Boot create a DFU class device via USB. This command - requires that the "dfu_alt_info" environment variable be - set and define the alt settings to expose to the host. - CONFIG_DFU_MMC This enables support for exposing (e)MMC devices via DFU. @@ -1377,13 +1252,6 @@ The following options need to be configured: CONFIG_USB_FUNCTION_FASTBOOT This enables the USB part of the fastboot gadget - CONFIG_CMD_FASTBOOT - This enables the command "fastboot" which enables the Android - fastboot mode for the platform's USB device. Fastboot is a USB - protocol for downloading images, flashing and device control - used on Android devices. - See doc/README.android-fastboot for more information. - CONFIG_ANDROID_BOOT_IMAGE This enables support for booting images which use the Android image format header. @@ -2489,12 +2357,7 @@ The following options need to be configured: commands cp, md... - Serial Flash support - CONFIG_CMD_SF - - Defining this option enables SPI flash commands - 'sf probe/read/write/erase/update'. - - Usage requires an initial 'probe' to define the serial + Usage requires an initial 'sf probe' to define the serial flash parameters, followed by read/write/erase/update commands. @@ -2507,12 +2370,6 @@ The following options need to be configured: CONFIG_SF_DEFAULT_MODE (see include/spi.h) CONFIG_SF_DEFAULT_SPEED in Hz - CONFIG_CMD_SF_TEST - - Define this option to include a destructive SPI flash - test ('sf test'). - -- SystemACE Support: CONFIG_SYSTEMACE Adding this option adds support for Xilinx SystemACE @@ -3429,7 +3286,7 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface. Please note that the environment is read-only until the monitor has been relocated to RAM and a RAM copy of the environment has been -created; also, when using EEPROM you will have to use getenv_f() +created; also, when using EEPROM you will have to use env_get_f() until then to read environment variables. The environment is protected by a CRC32 checksum. Before the monitor @@ -3693,7 +3550,7 @@ Low Level (hardware related) configuration options: - CONFIG_LOOPW Add the "loopw" memory command. This only takes effect if - the memory commands are activated globally (CONFIG_CMD_MEM). + the memory commands are activated globally (CONFIG_CMD_MEMORY). - CONFIG_MX_CYCLIC Add the "mdc" and "mwc" memory commands. These are cyclic @@ -3707,7 +3564,7 @@ Low Level (hardware related) configuration options: This command will write 12345678 to address 100 all 10 ms. This only takes effect if the memory commands are activated - globally (CONFIG_CMD_MEM). + globally (CONFIG_CMD_MEMORY). - CONFIG_SKIP_LOWLEVEL_INIT [ARM, NDS32, MIPS only] If this variable is defined, then certain @@ -458,7 +458,7 @@ static int API_env_get(va_list ap) if ((value = (char **)va_arg(ap, uintptr_t)) == NULL) return API_EINVAL; - *value = getenv(name); + *value = env_get(name); return 0; } @@ -481,7 +481,7 @@ static int API_env_set(va_list ap) if ((value = (char *)va_arg(ap, uintptr_t)) == NULL) return API_EINVAL; - setenv(name, value); + env_set(name, value); return 0; } @@ -625,7 +625,7 @@ int syscall(int call, int *retval, ...) void api_init(void) { - struct api_signature *sig = NULL; + struct api_signature *sig; /* TODO put this into linker set one day... */ calls_table[API_RSVD] = NULL; @@ -663,7 +663,7 @@ void api_init(void) return; } - setenv_hex("api_address", (unsigned long)sig); + env_set_hex("api_address", (unsigned long)sig); debugf("API sig @ 0x%lX\n", (unsigned long)sig); memcpy(sig->magic, API_SIG_MAGIC, 8); sig->version = API_SIG_VERSION; diff --git a/arch/Kconfig b/arch/Kconfig index e063ee0d23..78532f56ca 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -78,6 +78,7 @@ config SANDBOX imply LZMA imply SCSI imply CMD_SATA + imply CMD_SF_TEST config SH bool "SuperH architecture" @@ -111,6 +112,8 @@ config X86 imply CMD_GETTIME imply CMD_IO imply CMD_IRQ + imply CMD_SF_TEST + imply CMD_ZBOOT config XTENSA bool "Xtensa architecture" diff --git a/arch/arc/lib/bootm.c b/arch/arc/lib/bootm.c index 5798149046..a498ce5b29 100644 --- a/arch/arc/lib/bootm.c +++ b/arch/arc/lib/bootm.c @@ -85,7 +85,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) r2 = (unsigned int)images->ft_addr; } else { r0 = 1; - r2 = (unsigned int)getenv("bootargs"); + r2 = (unsigned int)env_get("bootargs"); } smp_set_core_boot_addr((unsigned long)kernel_entry, -1); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9cfeedeebd..da9324b43c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -97,6 +97,9 @@ config ARM_ERRATA_833069 config ARM_ERRATA_833471 bool +config ARM_ERRATA_845369 + bool + config ARM_ERRATA_852421 bool @@ -308,6 +311,7 @@ config TARGET_GPLUGD config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS + imply CMD_SAVES help Support for TI's DaVinci platform. @@ -409,21 +413,25 @@ config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS select BOARD_EARLY_INIT_F + imply CMD_SAVES config TARGET_SPEAR310 bool "Support spear310" select CPU_ARM926EJS select BOARD_EARLY_INIT_F + imply CMD_SAVES config TARGET_SPEAR320 bool "Support spear320" select CPU_ARM926EJS select BOARD_EARLY_INIT_F + imply CMD_SAVES config TARGET_SPEAR600 bool "Support spear600" select CPU_ARM926EJS select BOARD_EARLY_INIT_F + imply CMD_SAVES config TARGET_STV0991 bool "Support stv0991" @@ -488,7 +496,6 @@ config ARCH_BCM283X select DM_GPIO select OF_CONTROL imply FAT_WRITE - imply ENV_IS_IN_FAT config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" @@ -575,6 +582,7 @@ config ARCH_KEYSTONE select CMD_POWEROFF imply CMD_MTDPARTS imply FIT + imply CMD_SAVES config ARCH_OMAP2PLUS bool "TI OMAP2+" @@ -612,6 +620,11 @@ config ARCH_MX6 select SYS_FSL_SEC_LE select SYS_THUMB_BUILD if SPL +if ARCH_MX6 +config SPL_LDSCRIPT + default "arch/arm/mach-omap2/u-boot-spl.lds" +endif + config ARCH_MX5 bool "Freescale MX5" select CPU_V7 @@ -700,6 +713,7 @@ config ARCH_VF610 select CPU_V7 select SYS_FSL_ERRATUM_ESDHC111 imply CMD_MTDPARTS + imply NAND config ARCH_ZYNQ bool "Xilinx Zynq Platform" @@ -726,6 +740,7 @@ config ARCH_ZYNQ select CLK_ZYNQ imply CMD_CLK imply FAT_WRITE + imply CMD_SPL config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" @@ -1026,7 +1041,6 @@ config ARCH_UNIPHIER select SPL_PINCTRL if SPL select SUPPORT_SPL imply FAT_WRITE - imply ENV_IS_IN_MMC help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) @@ -1225,3 +1239,10 @@ source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" endmenu + +config SPL_LDSCRIPT + default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 + default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 + default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 + + diff --git a/arch/arm/cpu/arm926ejs/spear/spl.c b/arch/arm/cpu/arm926ejs/spear/spl.c index a60f5838de..ba1e559157 100644 --- a/arch/arm/cpu/arm926ejs/spear/spl.c +++ b/arch/arm/cpu/arm926ejs/spear/spl.c @@ -222,7 +222,7 @@ static void snor_init(void) u32 spl_boot_device(void) { - u32 mode; + u32 mode = 0; /* Currently only SNOR is supported as the only */ if (snor_boot_selected()) { diff --git a/arch/arm/cpu/armv7/bcm235xx/clk-core.c b/arch/arm/cpu/armv7/bcm235xx/clk-core.c index 79fafa08ed..89e367be82 100644 --- a/arch/arm/cpu/armv7/bcm235xx/clk-core.c +++ b/arch/arm/cpu/armv7/bcm235xx/clk-core.c @@ -479,9 +479,9 @@ unsigned long clk_get_rate(struct clk *c) { unsigned long rate; - debug("%s: %s\n", __func__, c->name); if (!c || !c->ops || !c->ops->get_rate) return 0; + debug("%s: %s\n", __func__, c->name); rate = c->ops->get_rate(c); debug("%s: rate = %ld\n", __func__, rate); @@ -493,9 +493,9 @@ int clk_set_rate(struct clk *c, unsigned long rate) { int ret; - debug("%s: %s rate=%ld\n", __func__, c->name, rate); if (!c || !c->ops || !c->ops->set_rate) return -EINVAL; + debug("%s: %s rate=%ld\n", __func__, c->name, rate); if (c->use_cnt) return -EINVAL; diff --git a/arch/arm/cpu/armv7/bcm281xx/clk-core.c b/arch/arm/cpu/armv7/bcm281xx/clk-core.c index cdc1264d7c..b061c20648 100644 --- a/arch/arm/cpu/armv7/bcm281xx/clk-core.c +++ b/arch/arm/cpu/armv7/bcm281xx/clk-core.c @@ -479,9 +479,9 @@ unsigned long clk_get_rate(struct clk *c) { unsigned long rate; - debug("%s: %s\n", __func__, c->name); if (!c || !c->ops || !c->ops->get_rate) return 0; + debug("%s: %s\n", __func__, c->name); rate = c->ops->get_rate(c); debug("%s: rate = %ld\n", __func__, rate); @@ -493,9 +493,9 @@ int clk_set_rate(struct clk *c, unsigned long rate) { int ret; - debug("%s: %s rate=%ld\n", __func__, c->name, rate); if (!c || !c->ops || !c->ops->set_rate) return -EINVAL; + debug("%s: %s rate=%ld\n", __func__, c->name, rate); if (c->use_cnt) return -EINVAL; diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 6a013b2183..fadfce4f05 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -15,6 +15,7 @@ config ARCH_LS1021A select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE imply SCSI + imply CMD_PCI menu "LS102xA architecture" depends on ARCH_LS1021A diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index f06fd28940..7b84a7a0f1 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -187,6 +187,12 @@ ENTRY(cpu_init_cp15) mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_845369 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 22 @ set bit #22 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + mov r5, lr @ Store my Caller mrc p15, 0, r1, c0, c0, 0 @ r1 has Read Main ID Register (MIDR) mov r3, r1, lsr #20 @ get variant field diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c index ac2d8d1a3f..88f3f4dd16 100644 --- a/arch/arm/cpu/armv7/vf610/generic.c +++ b/arch/arm/cpu/armv7/vf610/generic.c @@ -329,7 +329,7 @@ int arch_misc_init(void) strcpy(soc, "vf"); strcat(soc, soc_type); - setenv("soc", soc); + env_set("soc", soc); return 0; } diff --git a/arch/arm/cpu/armv7m/mpu.c b/arch/arm/cpu/armv7m/mpu.c index 31a243b49a..4622aa4826 100644 --- a/arch/arm/cpu/armv7m/mpu.c +++ b/arch/arm/cpu/armv7m/mpu.c @@ -68,6 +68,7 @@ void mpu_config(struct mpu_region_config *reg_config) break; case DEVICE_NON_SHARED: attr = (2 << TEX_SHIFT) | BUFFERABLE; + break; default: attr = 0; /* strongly ordered */ break; diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index c447085fe4..1249547436 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -8,7 +8,9 @@ extra-y := start.o obj-y += cpu.o +ifndef CONFIG_$(SPL_TPL_)TIMER obj-y += generic_timer.o +endif obj-y += cache_v8.o obj-y += exceptions.o obj-y += cache.o diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S index 7cba308ee7..ea845d1809 100644 --- a/arch/arm/cpu/armv8/cache.S +++ b/arch/arm/cpu/armv8/cache.S @@ -22,6 +22,7 @@ * x1: 0 clean & invalidate, 1 invalidate only * x2~x9: clobbered */ +.pushsection .text.__asm_dcache_level, "ax" ENTRY(__asm_dcache_level) lsl x12, x0, #1 msr csselr_el1, x12 /* select cache level */ @@ -58,6 +59,7 @@ loop_way: ret ENDPROC(__asm_dcache_level) +.popsection /* * void __asm_flush_dcache_all(int invalidate_only) @@ -66,6 +68,7 @@ ENDPROC(__asm_dcache_level) * * flush or invalidate all data cache by SET/WAY. */ +.pushsection .text.__asm_dcache_all, "ax" ENTRY(__asm_dcache_all) mov x1, x0 dsb sy @@ -102,16 +105,21 @@ skip: finished: ret ENDPROC(__asm_dcache_all) +.popsection +.pushsection .text.__asm_flush_dcache_all, "ax" ENTRY(__asm_flush_dcache_all) mov x0, #0 b __asm_dcache_all ENDPROC(__asm_flush_dcache_all) +.popsection +.pushsection .text.__asm_invalidate_dcache_all, "ax" ENTRY(__asm_invalidate_dcache_all) mov x0, #0x1 b __asm_dcache_all ENDPROC(__asm_invalidate_dcache_all) +.popsection /* * void __asm_flush_dcache_range(start, end) @@ -121,6 +129,7 @@ ENDPROC(__asm_invalidate_dcache_all) * x0: start address * x1: end address */ +.pushsection .text.__asm_flush_dcache_range, "ax" ENTRY(__asm_flush_dcache_range) mrs x3, ctr_el0 lsr x3, x3, #16 @@ -138,6 +147,7 @@ ENTRY(__asm_flush_dcache_range) dsb sy ret ENDPROC(__asm_flush_dcache_range) +.popsection /* * void __asm_invalidate_dcache_range(start, end) * @@ -146,6 +156,7 @@ ENDPROC(__asm_flush_dcache_range) * x0: start address * x1: end address */ +.pushsection .text.__asm_invalidate_dcache_range, "ax" ENTRY(__asm_invalidate_dcache_range) mrs x3, ctr_el0 ubfm x3, x3, #16, #19 @@ -162,41 +173,51 @@ ENTRY(__asm_invalidate_dcache_range) dsb sy ret ENDPROC(__asm_invalidate_dcache_range) +.popsection /* * void __asm_invalidate_icache_all(void) * * invalidate all tlb entries. */ +.pushsection .text.__asm_invalidate_icache_all, "ax" ENTRY(__asm_invalidate_icache_all) ic ialluis isb sy ret ENDPROC(__asm_invalidate_icache_all) +.popsection +.pushsection .text.__asm_invalidate_l3_dcache, "ax" ENTRY(__asm_invalidate_l3_dcache) mov x0, #0 /* return status as success */ ret ENDPROC(__asm_invalidate_l3_dcache) .weak __asm_invalidate_l3_dcache +.popsection +.pushsection .text.__asm_flush_l3_dcache, "ax" ENTRY(__asm_flush_l3_dcache) mov x0, #0 /* return status as success */ ret ENDPROC(__asm_flush_l3_dcache) .weak __asm_flush_l3_dcache +.popsection +.pushsection .text.__asm_invalidate_l3_icache, "ax" ENTRY(__asm_invalidate_l3_icache) mov x0, #0 /* return status as success */ ret ENDPROC(__asm_invalidate_l3_icache) .weak __asm_invalidate_l3_icache +.popsection /* * void __asm_switch_ttbr(ulong new_ttbr) * * Safely switches to a new page table. */ +.pushsection .text.__asm_switch_ttbr, "ax" ENTRY(__asm_switch_ttbr) /* x2 = SCTLR (alive throghout the function) */ switch_el x4, 3f, 2f, 1f @@ -244,3 +265,4 @@ ENTRY(__asm_switch_ttbr) ret x3 ENDPROC(__asm_switch_ttbr) +.popsection diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 5825f9b726..cdeef26fe5 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -27,6 +27,7 @@ config ARCH_LS1043A select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F imply SCSI + imply CMD_PCI config ARCH_LS1046A bool @@ -307,7 +308,7 @@ config SYS_FSL_DSPI_CLK_DIV default 2 help This is the divider that is used to derive DSPI clock from Platform - PLL, in another word DSPI_clk = Platform_PLL_freq / this_divider. + clock, in another word DSPI_clk = Platform_clk / this_divider. config SYS_FSL_DUART_CLK_DIV int "DUART clock divider" @@ -392,3 +393,6 @@ config SYS_MC_RSV_MEM_ALIGN help Reserved memory needs to be aligned for MC to use. Default value is 512MB. + +config SPL_LDSCRIPT + default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index aee1ffa7d4..639e9d2ddc 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -95,7 +95,7 @@ static void erratum_a008514(void) static unsigned long get_internval_val_mhz(void) { - char *interval = getenv(PLATFORM_CYCLE_ENV_VAR); + char *interval = env_get(PLATFORM_CYCLE_ENV_VAR); /* * interval is the number of platform cycles(MHz) between * wake up events generated by EPU. diff --git a/arch/arm/cpu/armv8/tlb.S b/arch/arm/cpu/armv8/tlb.S index 945445bc37..6743111b6a 100644 --- a/arch/arm/cpu/armv8/tlb.S +++ b/arch/arm/cpu/armv8/tlb.S @@ -14,7 +14,8 @@ * void __asm_invalidate_tlb_all(void) * * invalidate all tlb entries. - */ +*/ +.pushsection .text.__asm_invalidate_tlb_all, "ax" ENTRY(__asm_invalidate_tlb_all) switch_el x9, 3f, 2f, 1f 3: tlbi alle3 @@ -31,3 +32,4 @@ ENTRY(__asm_invalidate_tlb_all) 0: ret ENDPROC(__asm_invalidate_tlb_all) +.popsection diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S index ca07465376..7aa6935318 100644 --- a/arch/arm/cpu/armv8/transition.S +++ b/arch/arm/cpu/armv8/transition.S @@ -10,6 +10,7 @@ #include <linux/linkage.h> #include <asm/macro.h> +.pushsection .text.armv8_switch_to_el2, "ax" ENTRY(armv8_switch_to_el2) switch_el x6, 1f, 0f, 0f 0: @@ -30,7 +31,9 @@ ENTRY(armv8_switch_to_el2) br x4 1: armv8_switch_to_el2_m x4, x5, x6 ENDPROC(armv8_switch_to_el2) +.popsection +.pushsection .text.armv8_switch_to_el1, "ax" ENTRY(armv8_switch_to_el1) switch_el x6, 0f, 1f, 0f 0: @@ -40,7 +43,10 @@ ENTRY(armv8_switch_to_el1) br x4 1: armv8_switch_to_el1_m x4, x5, x6 ENDPROC(armv8_switch_to_el1) +.popsection +.pushsection .text.armv8_el2_to_aarch32, "ax" WEAK(armv8_el2_to_aarch32) ret ENDPROC(armv8_el2_to_aarch32) +.popsection diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 21a8103aee..f94c2471b4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ rk3328-evb.dtb \ + rk3368-lion.dtb \ rk3368-sheep.dtb \ rk3368-geekbox.dtb \ rk3368-px5-evb.dtb \ diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts index 37137c2e52..64f1c2d7da 100644 --- a/arch/arm/dts/rk3229-evb.dts +++ b/arch/arm/dts/rk3229-evb.dts @@ -72,6 +72,17 @@ status = "okay"; }; +&sdmmc { + status = "okay"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + supports-sd; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi index 4f2a1f6a15..22324f97b3 100644 --- a/arch/arm/dts/rk322x.dtsi +++ b/arch/arm/dts/rk322x.dtsi @@ -21,6 +21,8 @@ serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; + mmc0 = &emmc; + mmc1 = &sdmmc; }; cpus { @@ -383,12 +385,38 @@ status = "disabled"; }; + sdmmc: dwmmc@30000000 { + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30000000 0x4000>; + max-frequency = <150000000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "disabled"; + }; + + sdio: dwmmc@30010000 { + compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30010000 0x4000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; + status = "disabled"; + }; + emmc: dwmmc@30020000 { compatible = "rockchip,rk3288-dw-mshc"; reg = <0x30020000 0x4000>; + max-frequency = <150000000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <37500000>; - max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -520,6 +548,40 @@ drive-strength = <12>; }; + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <1 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <1 20 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <1 21 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = <3 0 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = <3 1 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = <3 2 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <3 3 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <3 4 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <3 5 RK_FUNC_1 &pcfg_pull_none_drv_12ma>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; diff --git a/arch/arm/dts/rk3368-geekbox-u-boot.dtsi b/arch/arm/dts/rk3368-geekbox-u-boot.dtsi new file mode 100644 index 0000000000..764b3e4cb4 --- /dev/null +++ b/arch/arm/dts/rk3368-geekbox-u-boot.dtsi @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3368-lion-u-boot.dtsi b/arch/arm/dts/rk3368-lion-u-boot.dtsi new file mode 100644 index 0000000000..6052e8a8d3 --- /dev/null +++ b/arch/arm/dts/rk3368-lion-u-boot.dtsi @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/ { + config { + u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ + u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + u-boot,spl-boot-order = &emmc, &sdmmc; + }; + +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + + /* + * Validation of throughput using SPEC2000 shows the following + * relative performance for the different memory schedules: + * - CBDR: 30.1 + * - CBRD: 29.8 + * - CRBD: 29.9 + * Note that the best performance for any given application workload + * may vary from the default configured here (e.g. 164.gzip is fastest + * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD). + * + * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for + * details on the 'rockchip,memory-schedule' property and how it + * affects the physical-address to device-address mapping. + */ + rockchip,memory-schedule = <DMC_MSCH_CBDR>; + rockchip,ddr-frequency = <800000000>; + rockchip,ddr-speed-bin = <DDR3_1600K>; + + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&sgrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&emmc { + u-boot,dm-pre-reloc; +}; + +&sdmmc { + u-boot,dm-pre-reloc; +}; + +&spi1 { + u-boot,dm-pre-reloc; + + spiflash: w25q32dw@0 { + u-boot,dm-pre-reloc; + }; +}; + +&timer0 { + u-boot,dm-pre-reloc; + clock-frequency = <24000000>; +}; + + diff --git a/arch/arm/dts/rk3368-lion.dts b/arch/arm/dts/rk3368-lion.dts new file mode 100644 index 0000000000..850db500e4 --- /dev/null +++ b/arch/arm/dts/rk3368-lion.dts @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/dts-v1/; +#include "rk3368.dtsi" +#include "rk3368-lion-u-boot.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Theobroma Systems RK3368-uQ7 SoM"; + compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368"; + + aliases { + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ext_gmac: gmac-clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&emmc { + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <150000000>; + disable-wp; + keep-power-in-suspend; + non-removable; + num-slots = <1>; + vmmc-supply = <&vcc33_io>; + vqmmc-supply = <&vcc18_io>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; +}; + +&sdmmc { + status = "okay"; +}; + +&gmac { + status = "okay"; + phy-supply = <&vcc33_io>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <2 10000 50000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x10>; + rx_delay = <0x10>; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_sys>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu"; + }; + + vdd_log: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_log"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc33_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_io"; + }; + + vcc33_video: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_video"; + }; + + vdd10_pll: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_pll"; + }; + + vcc18_io: LDO_REG4 { + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_io"; + }; + + vdd10_video: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_video"; + }; + + vcc18_video: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_video"; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + spiflash: w25q32dw@0 { + compatible = "spi-flash"; + reg = <0>; + spi-max-frequency = <49500000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi b/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi new file mode 100644 index 0000000000..3a5e30ea55 --- /dev/null +++ b/arch/arm/dts/rk3368-px5-evb-u-boot.dtsi @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3368-sheep-u-boot.dtsi b/arch/arm/dts/rk3368-sheep-u-boot.dtsi new file mode 100644 index 0000000000..764b3e4cb4 --- /dev/null +++ b/arch/arm/dts/rk3368-sheep-u-boot.dtsi @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&service_msch { + u-boot,dm-pre-reloc; +}; + +&dmc { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&pmugrf { + u-boot,dm-pre-reloc; +}; + +&cru { + u-boot,dm-pre-reloc; +}; + +&grf { + u-boot,dm-pre-reloc; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi index 9daf765430..b4f4f6139d 100644 --- a/arch/arm/dts/rk3368.dtsi +++ b/arch/arm/dts/rk3368.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/memory/rk3368-dmc.h> / { compatible = "rockchip,rk3368"; @@ -227,6 +228,21 @@ #clock-cells = <0>; }; + dmc: dmc@ff610000 { + compatible = "rockchip,rk3368-dmc", "syscon"; + rockchip,cru = <&cru>; + rockchip,grf = <&grf>; + rockchip,msch = <&service_msch>; + reg = <0 0xff610000 0 0x400 + 0 0xff620000 0 0x400>; + }; + + service_msch: syscon@ffac0000 { + compatible = "rockchip,rk3368-msch", "syscon"; + reg = <0x0 0xffac0000 0x0 0x2000>; + status = "okay"; + }; + sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; @@ -546,12 +562,6 @@ status = "disabled"; }; - dmc: dmc@ff610000 { - u-boot,dm-pre-reloc; - compatible = "rockchip,rk3368-dmc", "syscon"; - reg = <0x0 0xff610000 0x0 0x1000>; - }; - i2c0: i2c@ff650000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; @@ -647,11 +657,15 @@ }; pmugrf: syscon@ff738000 { - u-boot,dm-pre-reloc; compatible = "rockchip,rk3368-pmugrf", "syscon"; reg = <0x0 0xff738000 0x0 0x1000>; }; + sgrf: syscon@ff740000 { + compatible = "rockchip,rk3368-sgrf", "syscon"; + reg = <0x0 0xff740000 0x0 0x1000>; + }; + cru: clock-controller@ff760000 { compatible = "rockchip,rk3368-cru"; reg = <0x0 0xff760000 0x0 0x1000>; @@ -673,7 +687,7 @@ status = "disabled"; }; - timer@ff810000 { + timer0: timer@ff810000 { compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; reg = <0x0 0xff810000 0x0 0x20>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 8ad199f60a..4afc338b8e 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -35,6 +35,7 @@ #define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000) #define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000) #define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000) +#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x07600000) #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000) diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index a8456a284a..41f7240a35 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -863,7 +863,7 @@ MX6_PAD_DECL(SD3_DAT4__SD3_DATA4, 0x069C, 0x02B4, 0, 0x0000, 0, 0) MX6_PAD_DECL(SD3_DAT4__UART2_TX_DATA, 0x069C, 0x02B4, 1, 0x0000, 0, 0) MX6_PAD_DECL(SD3_DAT4__UART2_RX_DATA, 0x069C, 0x02B4, 1, 0x0928, 5, 0) MX6_PAD_DECL(SD3_DAT4__GPIO7_IO01, 0x069C, 0x02B4, 5, 0x0000, 0, 0) -MX6_PAD_DECL(SD3_CMD__SD3_CMD, 0x06A0, 0x02B8, 16, 0x0000, 0, 0) +MX6_PAD_DECL(SD3_CMD__SD3_CMD, 0x06A0, 0x02B8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(SD3_CMD__UART2_CTS_B, 0x06A0, 0x02B8, 1, 0x0000, 0, 0) MX6_PAD_DECL(SD3_CMD__UART2_RTS_B, 0x06A0, 0x02B8, 1, 0x0924, 2, 0) MX6_PAD_DECL(SD3_CMD__FLEXCAN1_TX, 0x06A0, 0x02B8, 2, 0x0000, 0, 0) @@ -924,7 +924,7 @@ MX6_PAD_DECL(NANDF_CS3__ESAI_TX1, 0x06D8, 0x02F0, 2, 0x0878, 1, 0) MX6_PAD_DECL(NANDF_CS3__EIM_ADDR26, 0x06D8, 0x02F0, 3, 0x0000, 0, 0) MX6_PAD_DECL(NANDF_CS3__GPIO6_IO16, 0x06D8, 0x02F0, 5, 0x0000, 0, 0) MX6_PAD_DECL(NANDF_CS3__IPU2_SISG1, 0x06D8, 0x02F0, 6, 0x0000, 0, 0) -MX6_PAD_DECL(SD4_CMD__SD4_CMD, 0x06DC, 0x02F4, 16, 0x0000, 0, 0) +MX6_PAD_DECL(SD4_CMD__SD4_CMD, 0x06DC, 0x02F4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(SD4_CMD__NAND_RE_B, 0x06DC, 0x02F4, 1, 0x0000, 0, 0) MX6_PAD_DECL(SD4_CMD__UART3_TX_DATA, 0x06DC, 0x02F4, 2, 0x0000, 0, 0) MX6_PAD_DECL(SD4_CMD__UART3_RX_DATA, 0x06DC, 0x02F4, 2, 0x0930, 2, 0) @@ -1001,7 +1001,7 @@ MX6_PAD_DECL(SD1_DAT3__PWM1_OUT, 0x072C, 0x0344, 3, 0x0000, 0, 0) MX6_PAD_DECL(SD1_DAT3__WDOG2_B, 0x072C, 0x0344, 4, 0x0000, 0, 0) MX6_PAD_DECL(SD1_DAT3__GPIO1_IO21, 0x072C, 0x0344, 5, 0x0000, 0, 0) MX6_PAD_DECL(SD1_DAT3__WDOG2_RESET_B_DEB, 0x072C, 0x0344, 6, 0x0000, 0, 0) -MX6_PAD_DECL(SD1_CMD__SD1_CMD, 0x0730, 0x0348, 16, 0x0000, 0, 0) +MX6_PAD_DECL(SD1_CMD__SD1_CMD, 0x0730, 0x0348, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(SD1_CMD__ECSPI5_MOSI, 0x0730, 0x0348, 1, 0x0830, 0, 0) MX6_PAD_DECL(SD1_CMD__PWM4_OUT, 0x0730, 0x0348, 2, 0x0000, 0, 0) MX6_PAD_DECL(SD1_CMD__GPT_COMPARE1, 0x0730, 0x0348, 3, 0x0000, 0, 0) @@ -1022,7 +1022,7 @@ MX6_PAD_DECL(SD2_CLK__ECSPI5_SCLK, 0x073C, 0x0354, 1, 0x0828, 1, 0) MX6_PAD_DECL(SD2_CLK__KEY_COL5, 0x073C, 0x0354, 2, 0x08E8, 3, 0) MX6_PAD_DECL(SD2_CLK__AUD4_RXFS, 0x073C, 0x0354, 3, 0x07C0, 1, 0) MX6_PAD_DECL(SD2_CLK__GPIO1_IO10, 0x073C, 0x0354, 5, 0x0000, 0, 0) -MX6_PAD_DECL(SD2_CMD__SD2_CMD, 0x0740, 0x0358, 16, 0x0000, 0, 0) +MX6_PAD_DECL(SD2_CMD__SD2_CMD, 0x0740, 0x0358, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0) MX6_PAD_DECL(SD2_CMD__ECSPI5_MOSI, 0x0740, 0x0358, 1, 0x0830, 1, 0) MX6_PAD_DECL(SD2_CMD__KEY_ROW5, 0x0740, 0x0358, 2, 0x08F4, 2, 0) MX6_PAD_DECL(SD2_CMD__AUD4_RXC, 0x0740, 0x0358, 3, 0x07BC, 1, 0) diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 0c99bbdc93..dbe340d23e 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -236,8 +236,21 @@ #define VDD_MPU_ES2_HIGH 1250 #define VDD_MM_ES2_OD 1120 -#define VDD_MPU_ES2_LOW 880 -#define VDD_MM_ES2_LOW 880 +/* Efuse register offsets for OMAP5 platform */ +#define OMAP5_ES2_EFUSE_BASE 0x4A002000 +#define OMAP5_ES2_PROD_REGBITS 16 + +/* CONTROL_STD_FUSE_OPP_VDD_CORE_3 */ +#define OMAP5_ES2_PROD_CORE_OPNO_VMIN (OMAP5_ES2_EFUSE_BASE + 0x1D8) + +/* CONTROL_STD_FUSE_OPP_VDD_MM_4 */ +#define OMAP5_ES2_PROD_MM_OPNO_VMIN (OMAP5_ES2_EFUSE_BASE + 0x1A4) +/* CONTROL_STD_FUSE_OPP_VDD_MM_5 */ +#define OMAP5_ES2_PROD_MM_OPOD_VMIN (OMAP5_ES2_EFUSE_BASE + 0x1A8) +/* CONTROL_STD_FUSE_OPP_VDD_MPU_6 */ +#define OMAP5_ES2_PROD_MPU_OPNO_VMIN (OMAP5_ES2_EFUSE_BASE + 0x1C4) +/* CONTROL_STD_FUSE_OPP_VDD_MPU_7 */ +#define OMAP5_ES2_PROD_MPU_OPHI_VMIN (OMAP5_ES2_EFUSE_BASE + 0x1C8) /* DRA74x/75x/72x voltage settings in mv for OPP_NOM per DM */ #define VDD_MPU_DRA7_NOM 1150 diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 2f005dd3ad..b047f0d650 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -224,8 +224,8 @@ struct s32ktimer { #define OMAP_ABB_GPU_TXDONE_MASK (0x1 << 28) /* ABB efuse masks */ -#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24) -#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29) +#define OMAP5_PROD_ABB_FUSE_VSET_MASK (0x1F << 20) +#define OMAP5_PROD_ABB_FUSE_ENABLE_MASK (0x1 << 25) #define DRA7_ABB_FUSE_VSET_MASK (0x1F << 20) #define DRA7_ABB_FUSE_ENABLE_MASK (0x1 << 25) #define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h index cb0a935edc..c7e21bd605 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3288.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3288.h @@ -85,7 +85,7 @@ enum { EMMC_PLL_SELECT_24MHZ, EMMC_DIV_SHIFT = 8, - EMMC_DIV_MASK = 0x3f < EMMC_DIV_SHIFT, + EMMC_DIV_MASK = 0x3f << EMMC_DIV_SHIFT, SDIO0_PLL_SHIFT = 6, SDIO0_PLL_MASK = 3 << SDIO0_PLL_SHIFT, diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h index 24a9cc0525..2b1197fd46 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h @@ -89,19 +89,26 @@ enum { MCU_CLK_DIV_SHIFT = 0, MCU_CLK_DIV_MASK = GENMASK(4, 0), + /* CLKSEL43_CON */ + GMAC_MUX_SEL_EXTCLK = BIT(8), + /* CLKSEL51_CON */ MMC_PLL_SEL_SHIFT = 8, MMC_PLL_SEL_MASK = GENMASK(9, 8), - MMC_PLL_SEL_CPLL = 0, - MMC_PLL_SEL_GPLL, - MMC_PLL_SEL_USBPHY_480M, - MMC_PLL_SEL_24M, + MMC_PLL_SEL_CPLL = (0 << MMC_PLL_SEL_SHIFT), + MMC_PLL_SEL_GPLL = (1 << MMC_PLL_SEL_SHIFT), + MMC_PLL_SEL_USBPHY_480M = (2 << MMC_PLL_SEL_SHIFT), + MMC_PLL_SEL_24M = (3 << MMC_PLL_SEL_SHIFT), MMC_CLK_DIV_SHIFT = 0, MMC_CLK_DIV_MASK = GENMASK(6, 0), /* SOFTRST1_CON */ MCU_PO_SRST_MASK = BIT(13), MCU_SYS_SRST_MASK = BIT(12), + DMA1_SRST_REQ = BIT(2), + + /* SOFTRST4_CON */ + DMA2_SRST_REQ = BIT(0), /* GLB_RST_CON */ PMU_GLB_SRST_CTRL_SHIFT = 2, diff --git a/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h b/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h new file mode 100644 index 0000000000..4e2b2337f2 --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/ddr_rk3368.h @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_ARCH_DDR_RK3368_H__ +#define __ASM_ARCH_DDR_RK3368_H__ + +/* + * The RK3368 DDR PCTL differs from the incarnation in the RK3288 only + * in a few details. Most notably, it has an additional field to track + * tREFI in controller cycles (i.e. trefi_mem_ddr3). + */ +struct rk3368_ddr_pctl { + u32 scfg; + u32 sctl; + u32 stat; + u32 intrstat; + u32 reserved0[12]; + u32 mcmd; + u32 powctl; + u32 powstat; + u32 cmdtstat; + u32 cmdtstaten; + u32 reserved1[3]; + u32 mrrcfg0; + u32 mrrstat0; + u32 mrrstat1; + u32 reserved2[4]; + u32 mcfg1; + u32 mcfg; + u32 ppcfg; + u32 mstat; + u32 lpddr2zqcfg; + u32 reserved3; + u32 dtupdes; + u32 dtuna; + u32 dtune; + u32 dtuprd0; + u32 dtuprd1; + u32 dtuprd2; + u32 dtuprd3; + u32 dtuawdt; + u32 reserved4[3]; + u32 togcnt1u; + u32 tinit; + u32 trsth; + u32 togcnt100n; + u32 trefi; + u32 tmrd; + u32 trfc; + u32 trp; + u32 trtw; + u32 tal; + u32 tcl; + u32 tcwl; + u32 tras; + u32 trc; + u32 trcd; + u32 trrd; + u32 trtp; + u32 twr; + u32 twtr; + u32 texsr; + u32 txp; + u32 txpdll; + u32 tzqcs; + u32 tzqcsi; + u32 tdqs; + u32 tcksre; + u32 tcksrx; + u32 tcke; + u32 tmod; + u32 trstl; + u32 tzqcl; + u32 tmrr; + u32 tckesr; + u32 tdpd; + u32 trefi_mem_ddr3; + u32 reserved5[45]; + u32 dtuwactl; + u32 dturactl; + u32 dtucfg; + u32 dtuectl; + u32 dtuwd0; + u32 dtuwd1; + u32 dtuwd2; + u32 dtuwd3; + u32 dtuwdm; + u32 dturd0; + u32 dturd1; + u32 dturd2; + u32 dturd3; + u32 dtulfsrwd; + u32 dtulfsrrd; + u32 dtueaf; + u32 dfitctrldelay; + u32 dfiodtcfg; + u32 dfiodtcfg1; + u32 dfiodtrankmap; + u32 dfitphywrdata; + u32 dfitphywrlat; + u32 reserved7[2]; + u32 dfitrddataen; + u32 dfitphyrdlat; + u32 reserved8[2]; + u32 dfitphyupdtype0; + u32 dfitphyupdtype1; + u32 dfitphyupdtype2; + u32 dfitphyupdtype3; + u32 dfitctrlupdmin; + u32 dfitctrlupdmax; + u32 dfitctrlupddly; + u32 reserved9; + u32 dfiupdcfg; + u32 dfitrefmski; + u32 dfitctrlupdi; + u32 reserved10[4]; + u32 dfitrcfg0; + u32 dfitrstat0; + u32 dfitrwrlvlen; + u32 dfitrrdlvlen; + u32 dfitrrdlvlgateen; + u32 dfiststat0; + u32 dfistcfg0; + u32 dfistcfg1; + u32 reserved11; + u32 dfitdramclken; + u32 dfitdramclkdis; + u32 dfistcfg2; + u32 dfistparclr; + u32 dfistparlog; + u32 reserved12[3]; + u32 dfilpcfg0; + u32 reserved13[3]; + u32 dfitrwrlvlresp0; + u32 dfitrwrlvlresp1; + u32 dfitrwrlvlresp2; + u32 dfitrrdlvlresp0; + u32 dfitrrdlvlresp1; + u32 dfitrrdlvlresp2; + u32 dfitrwrlvldelay0; + u32 dfitrwrlvldelay1; + u32 dfitrwrlvldelay2; + u32 dfitrrdlvldelay0; + u32 dfitrrdlvldelay1; + u32 dfitrrdlvldelay2; + u32 dfitrrdlvlgatedelay0; + u32 dfitrrdlvlgatedelay1; + u32 dfitrrdlvlgatedelay2; + u32 dfitrcmd; + u32 reserved14[46]; + u32 ipvr; + u32 iptr; +}; +check_member(rk3368_ddr_pctl, iptr, 0x03fc); + +struct rk3368_ddrphy { + u32 reg[0x100]; +}; +check_member(rk3368_ddrphy, reg[0xff], 0x03fc); + +struct rk3368_msch { + u32 coreid; + u32 revisionid; + u32 ddrconf; + u32 ddrtiming; + u32 ddrmode; + u32 readlatency; + u32 reserved1[8]; + u32 activate; + u32 devtodev; +}; +check_member(rk3368_msch, devtodev, 0x003c); + +/* GRF_SOC_CON0 */ +enum { + NOC_RSP_ERR_STALL = BIT(9), + MOBILE_DDR_SEL = BIT(4), + DDR0_16BIT_EN = BIT(3), + MSCH0_MAINDDR3_DDR3 = BIT(2), + MSCH0_MAINPARTIALPOP = BIT(1), + UPCTL_C_ACTIVE = BIT(0), +}; + +#endif diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3368.h b/arch/arm/include/asm/arch-rockchip/grf_rk3368.h index 93c4e7d4e1..6b6651acab 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3368.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3368.h @@ -1,4 +1,6 @@ -/* (C) Copyright 2016 Rockchip Electronics Co., Ltd +/* + * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * * SPDX-License-Identifier: GPL-2.0+ */ @@ -74,8 +76,11 @@ struct rk3368_grf { u32 soc_con15; u32 soc_con16; u32 soc_con17; + u32 reserved5[0x6e]; + u32 ddrc0_con0; }; check_member(rk3368_grf, soc_con17, 0x444); +check_member(rk3368_grf, ddrc0_con0, 0x600); struct rk3368_pmu_grf { u32 gpio0a_iomux; @@ -92,323 +97,11 @@ struct rk3368_pmu_grf { u32 gpio0d_drv; u32 gpio0l_sr; u32 gpio0h_sr; - u32 reserved[(0x200 - 0x34) / 4 - 1]; + u32 reserved[0x72]; u32 os_reg[4]; }; -check_member(rk3368_pmu_grf, os_reg[3], 0x20c); - -/*GRF_GPIO0C_IOMUX*/ -enum { - GPIO0C7_SHIFT = 14, - GPIO0C7_MASK = 3 << GPIO0C7_SHIFT, - GPIO0C7_GPIO = 0, - GPIO0C7_LCDC_D19, - GPIO0C7_TRACE_D9, - GPIO0C7_UART1_RTSN, - - GPIO0C6_SHIFT = 12, - GPIO0C6_MASK = 3 << GPIO0C6_SHIFT, - GPIO0C6_GPIO = 0, - GPIO0C6_LCDC_D18, - GPIO0C6_TRACE_D8, - GPIO0C6_UART1_CTSN, - - GPIO0C5_SHIFT = 10, - GPIO0C5_MASK = 3 << GPIO0C5_SHIFT, - GPIO0C5_GPIO = 0, - GPIO0C5_LCDC_D17, - GPIO0C5_TRACE_D7, - GPIO0C5_UART1_SOUT, - - GPIO0C4_SHIFT = 8, - GPIO0C4_MASK = 3 << GPIO0C4_SHIFT, - GPIO0C4_GPIO = 0, - GPIO0C4_LCDC_D16, - GPIO0C4_TRACE_D6, - GPIO0C4_UART1_SIN, - - GPIO0C3_SHIFT = 6, - GPIO0C3_MASK = 3 << GPIO0C3_SHIFT, - GPIO0C3_GPIO = 0, - GPIO0C3_LCDC_D15, - GPIO0C3_TRACE_D5, - GPIO0C3_MCU_JTAG_TDO, - - GPIO0C2_SHIFT = 4, - GPIO0C2_MASK = 3 << GPIO0C2_SHIFT, - GPIO0C2_GPIO = 0, - GPIO0C2_LCDC_D14, - GPIO0C2_TRACE_D4, - GPIO0C2_MCU_JTAG_TDI, - - GPIO0C1_SHIFT = 2, - GPIO0C1_MASK = 3 << GPIO0C1_SHIFT, - GPIO0C1_GPIO = 0, - GPIO0C1_LCDC_D13, - GPIO0C1_TRACE_D3, - GPIO0C1_MCU_JTAG_TRTSN, - - GPIO0C0_SHIFT = 0, - GPIO0C0_MASK = 3 << GPIO0C0_SHIFT, - GPIO0C0_GPIO = 0, - GPIO0C0_LCDC_D12, - GPIO0C0_TRACE_D2, - GPIO0C0_MCU_JTAG_TDO, -}; - -/*GRF_GPIO0D_IOMUX*/ -enum { - GPIO0D7_SHIFT = 14, - GPIO0D7_MASK = 3 << GPIO0D7_SHIFT, - GPIO0D7_GPIO = 0, - GPIO0D7_LCDC_DCLK, - GPIO0D7_TRACE_CTL, - GPIO0D7_PMU_DEBUG5, - - GPIO0D6_SHIFT = 12, - GPIO0D6_MASK = 3 << GPIO0D6_SHIFT, - GPIO0D6_GPIO = 0, - GPIO0D6_LCDC_DEN, - GPIO0D6_TRACE_CLK, - GPIO0D6_PMU_DEBUG4, - - GPIO0D5_SHIFT = 10, - GPIO0D5_MASK = 3 << GPIO0D5_SHIFT, - GPIO0D5_GPIO = 0, - GPIO0D5_LCDC_VSYNC, - GPIO0D5_TRACE_D15, - GPIO0D5_PMU_DEBUG3, - - GPIO0D4_SHIFT = 8, - GPIO0D4_MASK = 3 << GPIO0D4_SHIFT, - GPIO0D4_GPIO = 0, - GPIO0D4_LCDC_HSYNC, - GPIO0D4_TRACE_D14, - GPIO0D4_PMU_DEBUG2, - - GPIO0D3_SHIFT = 6, - GPIO0D3_MASK = 3 << GPIO0D3_SHIFT, - GPIO0D3_GPIO = 0, - GPIO0D3_LCDC_D23, - GPIO0D3_TRACE_D13, - GPIO0D3_UART4_SIN, - - GPIO0D2_SHIFT = 4, - GPIO0D2_MASK = 3 << GPIO0D2_SHIFT, - GPIO0D2_GPIO = 0, - GPIO0D2_LCDC_D22, - GPIO0D2_TRACE_D12, - GPIO0D2_UART4_SOUT, - - GPIO0D1_SHIFT = 2, - GPIO0D1_MASK = 3 << GPIO0D1_SHIFT, - GPIO0D1_GPIO = 0, - GPIO0D1_LCDC_D21, - GPIO0D1_TRACE_D11, - GPIO0D1_UART4_RTSN, - - GPIO0D0_SHIFT = 0, - GPIO0D0_MASK = 3 << GPIO0D0_SHIFT, - GPIO0D0_GPIO = 0, - GPIO0D0_LCDC_D20, - GPIO0D0_TRACE_D10, - GPIO0D0_UART4_CTSN, -}; - -/*GRF_GPIO2A_IOMUX*/ -enum { - GPIO2A7_SHIFT = 14, - GPIO2A7_MASK = 3 << GPIO2A7_SHIFT, - GPIO2A7_GPIO = 0, - GPIO2A7_SDMMC0_D2, - GPIO2A7_JTAG_TCK, - - GPIO2A6_SHIFT = 12, - GPIO2A6_MASK = 3 << GPIO2A6_SHIFT, - GPIO2A6_GPIO = 0, - GPIO2A6_SDMMC0_D1, - GPIO2A6_UART2_SIN, - - GPIO2A5_SHIFT = 10, - GPIO2A5_MASK = 3 << GPIO2A5_SHIFT, - GPIO2A5_GPIO = 0, - GPIO2A5_SDMMC0_D0, - GPIO2A5_UART2_SOUT, - - GPIO2A4_SHIFT = 8, - GPIO2A4_MASK = 3 << GPIO2A4_SHIFT, - GPIO2A4_GPIO = 0, - GPIO2A4_FLASH_DQS, - GPIO2A4_EMMC_CLKO, - - GPIO2A3_SHIFT = 6, - GPIO2A3_MASK = 3 << GPIO2A3_SHIFT, - GPIO2A3_GPIO = 0, - GPIO2A3_FLASH_CSN3, - GPIO2A3_EMMC_RSTNO, - - GPIO2A2_SHIFT = 4, - GPIO2A2_MASK = 3 << GPIO2A2_SHIFT, - GPIO2A2_GPIO = 0, - GPIO2A2_FLASH_CSN2, - - GPIO2A1_SHIFT = 2, - GPIO2A1_MASK = 3 << GPIO2A1_SHIFT, - GPIO2A1_GPIO = 0, - GPIO2A1_FLASH_CSN1, - - GPIO2A0_SHIFT = 0, - GPIO2A0_MASK = 3 << GPIO2A0_SHIFT, - GPIO2A0_GPIO = 0, - GPIO2A0_FLASH_CSN0, -}; - -/*GRF_GPIO2D_IOMUX*/ -enum { - GPIO2D7_SHIFT = 14, - GPIO2D7_MASK = 3 << GPIO2D7_SHIFT, - GPIO2D7_GPIO = 0, - GPIO2D7_SDIO0_D3, - - GPIO2D6_SHIFT = 12, - GPIO2D6_MASK = 3 << GPIO2D6_SHIFT, - GPIO2D6_GPIO = 0, - GPIO2D6_SDIO0_D2, - - GPIO2D5_SHIFT = 10, - GPIO2D5_MASK = 3 << GPIO2D5_SHIFT, - GPIO2D5_GPIO = 0, - GPIO2D5_SDIO0_D1, - - GPIO2D4_SHIFT = 8, - GPIO2D4_MASK = 3 << GPIO2D4_SHIFT, - GPIO2D4_GPIO = 0, - GPIO2D4_SDIO0_D0, - - GPIO2D3_SHIFT = 6, - GPIO2D3_MASK = 3 << GPIO2D3_SHIFT, - GPIO2D3_GPIO = 0, - GPIO2D3_UART0_RTS0, - - GPIO2D2_SHIFT = 4, - GPIO2D2_MASK = 3 << GPIO2D2_SHIFT, - GPIO2D2_GPIO = 0, - GPIO2D2_UART0_CTS0, - - GPIO2D1_SHIFT = 2, - GPIO2D1_MASK = 3 << GPIO2D1_SHIFT, - GPIO2D1_GPIO = 0, - GPIO2D1_UART0_SOUT, - - GPIO2D0_SHIFT = 0, - GPIO2D0_MASK = 3 << GPIO2D0_SHIFT, - GPIO2D0_GPIO = 0, - GPIO2D0_UART0_SIN, -}; - -/*GRF_GPIO3C_IOMUX*/ -enum { - GPIO3C7_SHIFT = 14, - GPIO3C7_MASK = 3 << GPIO3C7_SHIFT, - GPIO3C7_GPIO = 0, - GPIO3C7_EDPHDMI_CECINOUT, - GPIO3C7_ISP_FLASHTRIGIN, - - GPIO3C6_SHIFT = 12, - GPIO3C6_MASK = 3 << GPIO3C6_SHIFT, - GPIO3C6_GPIO = 0, - GPIO3C6_MAC_CLK, - GPIO3C6_ISP_SHUTTERTRIG, - - GPIO3C5_SHIFT = 10, - GPIO3C5_MASK = 3 << GPIO3C5_SHIFT, - GPIO3C5_GPIO = 0, - GPIO3C5_MAC_RXER, - GPIO3C5_ISP_PRELIGHTTRIG, - - GPIO3C4_SHIFT = 8, - GPIO3C4_MASK = 3 << GPIO3C4_SHIFT, - GPIO3C4_GPIO = 0, - GPIO3C4_MAC_RXDV, - GPIO3C4_ISP_FLASHTRIGOUT, - - GPIO3C3_SHIFT = 6, - GPIO3C3_MASK = 3 << GPIO3C3_SHIFT, - GPIO3C3_GPIO = 0, - GPIO3C3_MAC_RXDV, - GPIO3C3_EMMC_RSTNO, - - GPIO3C2_SHIFT = 4, - GPIO3C2_MASK = 3 << GPIO3C2_SHIFT, - GPIO3C2_MAC_MDC = 0, - GPIO3C2_ISP_SHUTTEREN, - - GPIO3C1_SHIFT = 2, - GPIO3C1_MASK = 3 << GPIO3C1_SHIFT, - GPIO3C1_GPIO = 0, - GPIO3C1_MAC_RXD2, - GPIO3C1_UART3_RTSN, - - GPIO3C0_SHIFT = 0, - GPIO3C0_MASK = 3 << GPIO3C0_SHIFT, - GPIO3C0_GPIO = 0, - GPIO3C0_MAC_RXD1, - GPIO3C0_UART3_CTSN, - GPIO3C0_GPS_RFCLK, -}; - -/*GRF_GPIO3D_IOMUX*/ -enum { - GPIO3D7_SHIFT = 14, - GPIO3D7_MASK = 3 << GPIO3D7_SHIFT, - GPIO3D7_GPIO = 0, - GPIO3D7_SC_VCC18V, - GPIO3D7_I2C2_SDA, - GPIO3D7_GPUJTAG_TCK, - - GPIO3D6_SHIFT = 12, - GPIO3D6_MASK = 3 << GPIO3D6_SHIFT, - GPIO3D6_GPIO = 0, - GPIO3D6_IR_TX, - GPIO3D6_UART3_SOUT, - GPIO3D6_PWM3, - - GPIO3D5_SHIFT = 10, - GPIO3D5_MASK = 3 << GPIO3D5_SHIFT, - GPIO3D5_GPIO = 0, - GPIO3D5_IR_RX, - GPIO3D5_UART3_SIN, - - GPIO3D4_SHIFT = 8, - GPIO3D4_MASK = 3 << GPIO3D4_SHIFT, - GPIO3D4_GPIO = 0, - GPIO3D4_MAC_TXCLKOUT, - GPIO3D4_SPI1_CSN1, - - GPIO3D3_SHIFT = 6, - GPIO3D3_MASK = 3 << GPIO3D3_SHIFT, - GPIO3D3_GPIO = 0, - GPIO3D3_HDMII2C_SCL, - GPIO3D3_I2C5_SCL, - - GPIO3D2_SHIFT = 4, - GPIO3D2_MASK = 3 << GPIO3D2_SHIFT, - GPIO3D2_GPIO = 0, - GPIO3D2_HDMII2C_SDA, - GPIO3D2_I2C5_SDA, - - GPIO3D1_SHIFT = 2, - GPIO3D1_MASK = 3 << GPIO3D1_SHIFT, - GPIO3D1_GPIO = 0, - GPIO3D1_MAC_RXCLKIN, - GPIO3D1_I2C4_SCL, - - GPIO3D0_SHIFT = 0, - GPIO3D0_MASK = 3 << GPIO3D0_SHIFT, - GPIO3D0_GPIO = 0, - GPIO3D0_MAC_MDIO, - GPIO3D0_I2C4_SDA, -}; +check_member(rk3368_pmu_grf, gpio0h_sr, 0x34); +check_member(rk3368_pmu_grf, os_reg[0], 0x200); /*GRF_SOC_CON11/12/13*/ enum { @@ -439,4 +132,5 @@ enum { MCU_CODE_BASE_BIT31_BIT28_SHIFT = 0, MCU_CODE_BASE_BIT31_BIT28_MASK = GENMASK(3, 0), }; + #endif diff --git a/arch/arm/include/asm/arch-stm32f1/gpio.h b/arch/arm/include/asm/arch-stm32f1/gpio.h deleted file mode 100644 index 8e8712fecc..0000000000 --- a/arch/arm/include/asm/arch-stm32f1/gpio.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2011 - * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com - * - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _STM32_GPIO_H_ -#define _STM32_GPIO_H_ - -enum stm32_gpio_port { - STM32_GPIO_PORT_A = 0, - STM32_GPIO_PORT_B, - STM32_GPIO_PORT_C, - STM32_GPIO_PORT_D, - STM32_GPIO_PORT_E, - STM32_GPIO_PORT_F, - STM32_GPIO_PORT_G, -}; - -enum stm32_gpio_pin { - STM32_GPIO_PIN_0 = 0, - STM32_GPIO_PIN_1, - STM32_GPIO_PIN_2, - STM32_GPIO_PIN_3, - STM32_GPIO_PIN_4, - STM32_GPIO_PIN_5, - STM32_GPIO_PIN_6, - STM32_GPIO_PIN_7, - STM32_GPIO_PIN_8, - STM32_GPIO_PIN_9, - STM32_GPIO_PIN_10, - STM32_GPIO_PIN_11, - STM32_GPIO_PIN_12, - STM32_GPIO_PIN_13, - STM32_GPIO_PIN_14, - STM32_GPIO_PIN_15 -}; - -enum stm32_gpio_icnf { - STM32_GPIO_ICNF_AN = 0, - STM32_GPIO_ICNF_IN_FLT, - STM32_GPIO_ICNF_IN_PUD, - STM32_GPIO_ICNF_RSVD -}; - -enum stm32_gpio_ocnf { - STM32_GPIO_OCNF_GP_PP = 0, - STM32_GPIO_OCNF_GP_OD, - STM32_GPIO_OCNF_AF_PP, - STM32_GPIO_OCNF_AF_OD -}; - -enum stm32_gpio_pupd { - STM32_GPIO_PUPD_DOWN = 0, - STM32_GPIO_PUPD_UP, -}; - -enum stm32_gpio_mode { - STM32_GPIO_MODE_IN = 0, - STM32_GPIO_MODE_OUT_10M, - STM32_GPIO_MODE_OUT_2M, - STM32_GPIO_MODE_OUT_50M -}; - -enum stm32_gpio_af { - STM32_GPIO_AF0 = 0, - STM32_GPIO_AF1, - STM32_GPIO_AF2, - STM32_GPIO_AF3, - STM32_GPIO_AF4, - STM32_GPIO_AF5, - STM32_GPIO_AF6, - STM32_GPIO_AF7, - STM32_GPIO_AF8, - STM32_GPIO_AF9, - STM32_GPIO_AF10, - STM32_GPIO_AF11, - STM32_GPIO_AF12, - STM32_GPIO_AF13, - STM32_GPIO_AF14, - STM32_GPIO_AF15 -}; - -struct stm32_gpio_dsc { - enum stm32_gpio_port port; - enum stm32_gpio_pin pin; -}; - -struct stm32_gpio_ctl { - enum stm32_gpio_icnf icnf; - enum stm32_gpio_ocnf ocnf; - enum stm32_gpio_mode mode; - enum stm32_gpio_pupd pupd; - enum stm32_gpio_af af; -}; - -static inline unsigned stm32_gpio_to_port(unsigned gpio) -{ - return gpio / 16; -} - -static inline unsigned stm32_gpio_to_pin(unsigned gpio) -{ - return gpio % 16; -} - -int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc, - const struct stm32_gpio_ctl *gpio_ctl); -int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state); - -#endif /* _STM32_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h deleted file mode 100644 index 1af73c5428..0000000000 --- a/arch/arm/include/asm/arch-stm32f1/stm32.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2011 - * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com - * - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _MACH_STM32_H_ -#define _MACH_STM32_H_ - -/* - * Peripheral memory map - */ -#define STM32_PERIPH_BASE 0x40000000 -#define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000) -#define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000) -#define STM32_AHB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00018000) - -#define STM32_BUS_MASK 0xFFFF0000 - -#define STM32_GPIOA_BASE (STM32_APB2PERIPH_BASE + 0x0800) -#define STM32_GPIOB_BASE (STM32_APB2PERIPH_BASE + 0x0C00) -#define STM32_GPIOC_BASE (STM32_APB2PERIPH_BASE + 0x1000) -#define STM32_GPIOD_BASE (STM32_APB2PERIPH_BASE + 0x1400) -#define STM32_GPIOE_BASE (STM32_APB2PERIPH_BASE + 0x1800) -#define STM32_GPIOF_BASE (STM32_APB2PERIPH_BASE + 0x1C00) -#define STM32_GPIOG_BASE (STM32_APB2PERIPH_BASE + 0x2000) - -/* - * Register maps - */ -struct stm32_des_regs { - u16 flash_size; - u16 pad1; - u32 pad2; - u32 uid0; - u32 uid1; - u32 uid2; -}; - -struct stm32_rcc_regs { - u32 cr; /* RCC clock control */ - u32 cfgr; /* RCC clock configuration */ - u32 cir; /* RCC clock interrupt */ - u32 apb2rstr; /* RCC APB2 peripheral reset */ - u32 apb1rstr; /* RCC APB1 peripheral reset */ - u32 ahbenr; /* RCC AHB peripheral clock enable */ - u32 apb2enr; /* RCC APB2 peripheral clock enable */ - u32 apb1enr; /* RCC APB1 peripheral clock enable */ - u32 bdcr; /* RCC Backup domain control */ - u32 csr; /* RCC clock control & status */ -}; - -struct stm32_pwr_regs { - u32 cr; - u32 csr; -}; - -struct stm32_flash_regs { - u32 acr; - u32 keyr; - u32 optkeyr; - u32 sr; - u32 cr; - u32 ar; - u32 rsvd1; /* Reserved */ - u32 obr; - u32 wrpr; - u32 rsvd2[8]; /* Reserved */ - u32 keyr2; - u32 rsvd3; - u32 sr2; - u32 cr2; - u32 ar2; -}; - -/* Per bank register set for XL devices */ -struct stm32_flash_bank_regs { - u32 keyr; - u32 rsvd; /* Reserved */ - u32 sr; - u32 cr; - u32 ar; -}; - -/* - * Registers access macros - */ -#define STM32_DES_BASE (0x1ffff7e0) -#define STM32_DES ((struct stm32_des_regs *)STM32_DES_BASE) - -#define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x9000) -#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) - -#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000) -#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE) - -#define STM32_FLASH_BASE (STM32_AHB1PERIPH_BASE + 0xa000) -#define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_BASE) - -#define STM32_FLASH_SR_BSY (1 << 0) - -#define STM32_FLASH_CR_PG (1 << 0) -#define STM32_FLASH_CR_PER (1 << 1) -#define STM32_FLASH_CR_STRT (1 << 6) -#define STM32_FLASH_CR_LOCK (1 << 7) - -enum clock { - CLOCK_CORE, - CLOCK_AHB, - CLOCK_APB1, - CLOCK_APB2 -}; - -int configure_clocks(void); -unsigned long clock_get(enum clock clck); - -#endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index 0e674704ab..df45511699 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -30,6 +30,7 @@ enum { BOOT_DEVICE_BOARD, BOOT_DEVICE_DFU, BOOT_DEVICE_XIP, + BOOT_DEVICE_BOOTROM, BOOT_DEVICE_NONE }; #endif diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 704849bd0c..5c62d9c144 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -216,7 +216,7 @@ static void do_nonsec_virt_switch(void) /* Subcommand: PREP */ static void boot_prep_linux(bootm_headers_t *images) { - char *commandline = getenv("bootargs"); + char *commandline = env_get("bootargs"); if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { #ifdef CONFIG_OF_LIBFDT @@ -273,7 +273,7 @@ __weak bool armv7_boot_nonsec_default(void) #ifdef CONFIG_ARMV7_NONSEC bool armv7_boot_nonsec(void) { - char *s = getenv("bootm_boot_mode"); + char *s = env_get("bootm_boot_mode"); bool nonsec = armv7_boot_nonsec_default(); if (s && !strcmp(s, "sec")) @@ -361,7 +361,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) ulong addr = (ulong)kernel_entry | 1; kernel_entry = (void *)addr; #endif - s = getenv("machid"); + s = env_get("machid"); if (s) { if (strict_strtoul(s, 16, &machid) < 0) { debug("strict_strtoul failed!\n"); diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index 57e728f9f2..62fad452b2 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -69,7 +69,9 @@ ENTRY(_main) /* * Set up initial C runtime environment and call board_init_f(0). */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) + ldr x0, =(CONFIG_TPL_STACK) +#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr x0, =(CONFIG_SPL_STACK) #else ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) diff --git a/arch/arm/lib/semihosting.c b/arch/arm/lib/semihosting.c index 415ac89de9..bcd16ee591 100644 --- a/arch/arm/lib/semihosting.c +++ b/arch/arm/lib/semihosting.c @@ -200,7 +200,7 @@ static int do_smhload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* Optionally save returned end to the environment */ if (argc == 4) { sprintf(end_str, "0x%08lx", end_addr); - setenv(argv[3], end_str); + env_set(argv[3], end_str); } } else { return CMD_RET_USAGE; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 23ddc6296d..20f7eeaf09 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -199,4 +199,8 @@ source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" +config SPL_LDSCRIPT + default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS + default "arch/arm/mach-at91/armv7/u-boot-spl.lds" if CPU_V7 + endif diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 4757f2496d..35e4e9bcea 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -53,4 +53,8 @@ source "board/davinci/ea20/Kconfig" source "board/omicron/calimain/Kconfig" source "board/lego/ev3/Kconfig" +config SPL_LDSCRIPT + default "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" if TARGET_IPAM390 + default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" + endif diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c index ec331ba6bb..461ff778c2 100644 --- a/arch/arm/mach-davinci/misc.c +++ b/arch/arm/mach-davinci/misc.c @@ -90,7 +90,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) uint8_t env_enetaddr[6]; int ret; - ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr); + ret = eth_env_get_enetaddr_by_index("eth", 0, env_enetaddr); if (!ret) { /* * There is no MAC address in the environment, so we @@ -99,7 +99,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) debug("### Setting environment from EEPROM MAC address = " "\"%pM\"\n", env_enetaddr); - ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr); + ret = !eth_env_set_enetaddr("ethaddr", rom_enetaddr); } if (!ret) printf("Failed to set mac address from EEPROM: %d\n", ret); diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d1aa68db20..2fb84f9453 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -8,7 +8,6 @@ config ARCH_EXYNOS4 bool "Exynos4 SoC family" select CPU_V7 select BOARD_EARLY_INIT_F - imply ENV_IS_IN_MMC help Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There are multiple SoCs in this family including Exynos4210, Exynos4412, @@ -161,4 +160,7 @@ source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" source "board/samsung/espresso7420/Kconfig" +config SPL_LDSCRIPT + default "board/samsung/common/exynos-uboot-spl.lds" if ARCH_EXYNOS5 || ARCH_EXYNOS4 + endif diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index bb2ce33132..a1aa36bc22 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -1,24 +1,32 @@ if ARCH_MX6 +config MX6_SMP + select ARM_ERRATA_751472 + select ARM_ERRATA_761320 + select ARM_ERRATA_794072 + select ARM_ERRATA_845369 + bool + config MX6 + select ARM_ERRATA_743622 if !MX6UL bool default y - select ARM_ERRATA_743622 if !MX6UL - select ARM_ERRATA_751472 if !MX6UL - select ARM_ERRATA_761320 if !MX6UL - select ARM_ERRATA_794072 if !MX6UL imply CMD_FUSE config MX6D + select MX6_SMP bool config MX6DL + select MX6_SMP bool config MX6Q + select MX6_SMP bool config MX6QDL + select MX6_SMP bool config MX6S @@ -30,7 +38,6 @@ config MX6SL config MX6SX select ROM_UNIFIED_SECTIONS bool - imply ENV_IS_IN_MMC config MX6SLL select ROM_UNIFIED_SECTIONS @@ -145,6 +152,7 @@ config TARGET_GW_VENTANA bool "gw_ventana" select SUPPORT_SPL imply CMD_SATA + imply CMD_SPL config TARGET_KOSAGI_NOVENA bool "Kosagi Novena" @@ -331,6 +339,11 @@ config TARGET_PCM058 select BOARD_LATE_INIT select SUPPORT_SPL +config TARGET_PFLA02 + bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad" + select BOARD_LATE_INIT + select SUPPORT_SPL + config TARGET_SECOMX6 bool "secomx6 boards" @@ -428,6 +441,7 @@ source "board/freescale/mx6ul_14x14_evk/Kconfig" source "board/freescale/mx6ullevk/Kconfig" source "board/grinn/liteboard/Kconfig" source "board/phytec/pcm058/Kconfig" +source "board/phytec/pfla02/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" source "board/samtec/vining_2000/Kconfig" diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index 1f2739e864..0e019c4262 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -19,7 +19,7 @@ enum pll_clocks { PLL_USBOTG, /* OTG USB PLL */ PLL_ENET, /* ENET PLL */ PLL_AUDIO, /* AUDIO PLL */ - PLL_VIDEO, /* AUDIO PLL */ + PLL_VIDEO, /* VIDEO PLL */ }; struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c index 22b244079b..f8d7e8ee68 100644 --- a/arch/arm/mach-imx/mx6/opos6ul.c +++ b/arch/arm/mach-imx/mx6/opos6ul.c @@ -132,7 +132,7 @@ int board_late_init(void) /* In bootstrap don't use the env vars */ if (((reg & 0x3000000) >> 24) == 0x1) { set_default_env(NULL); - setenv("preboot", ""); + env_set("preboot", ""); } return opos6ul_board_late_init(); diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index af316735ee..9ede1f5435 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -114,6 +114,12 @@ u32 get_cpu_rev(void) #define OCOTP_CFG3_SPEED_528MHZ 1 #define OCOTP_CFG3_SPEED_696MHZ 2 +/* + * For i.MX6ULL + */ +#define OCOTP_CFG3_SPEED_792MHZ 2 +#define OCOTP_CFG3_SPEED_900MHZ 3 + u32 get_cpu_speed_grade_hz(void) { struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; @@ -126,11 +132,22 @@ u32 get_cpu_speed_grade_hz(void) val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if (is_mx6ul() || is_mx6ull()) { + if (is_mx6ul()) { if (val == OCOTP_CFG3_SPEED_528MHZ) return 528000000; else if (val == OCOTP_CFG3_SPEED_696MHZ) - return 69600000; + return 696000000; + else + return 0; + } + + if (is_mx6ull()) { + if (val == OCOTP_CFG3_SPEED_528MHZ) + return 528000000; + else if (val == OCOTP_CFG3_SPEED_792MHZ) + return 792000000; + else if (val == OCOTP_CFG3_SPEED_900MHZ) + return 900000000; else return 0; } @@ -234,6 +251,10 @@ static int set_ldo_voltage(enum ldo_reg ldo, u32 mv) u32 val, step, old, reg = readl(&anatop->reg_core); u8 shift; + /* No LDO_SOC/PU/ARM */ + if (is_mx6sll()) + return 0; + if (mv < 725) val = 0x00; /* Power gated off */ else if (mv > 1450) @@ -293,7 +314,7 @@ static void clear_mmdc_ch_mask(void) reg = readl(&mxc_ccm->ccdr); /* Clear MMDC channel mask */ - if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl()) + if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() || is_mx6sll()) reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK); else reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK); @@ -344,20 +365,10 @@ static void init_bandgap(void) } } -#ifdef CONFIG_MX6SL -static void set_preclk_from_osc(void) -{ - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; - u32 reg; - - reg = readl(&mxc_ccm->cscmr1); - reg |= MXC_CCM_CSCMR1_PER_CLK_SEL_MASK; - writel(reg, &mxc_ccm->cscmr1); -} -#endif - int arch_cpu_init(void) { + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + init_aips(); /* Need to clear MMDC_CHx_MASK to make warm reset work. */ @@ -421,12 +432,14 @@ int arch_cpu_init(void) } /* Set perclk to source from OSC 24MHz */ -#if defined(CONFIG_MX6SL) - set_preclk_from_osc(); -#endif + if (is_mx6sl()) + setbits_le32(&ccm->cscmr1, MXC_CCM_CSCMR1_PER_CLK_SEL_MASK); imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ + if (is_mx6sx()) + setbits_le32(&ccm->cscdr1, MXC_CCM_CSCDR1_UART_CLK_SEL); + init_src(); return 0; @@ -495,6 +508,10 @@ uint mmc_get_env_part(struct mmc *mmc) int board_postclk_init(void) { + /* NO LDO SOC on i.MX6SLL */ + if (is_mx6sll()) + return 0; + set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */ return 0; @@ -576,7 +593,7 @@ void s_init(void) u32 mask528; u32 reg, periph1, periph2; - if (is_mx6sx() || is_mx6ul() || is_mx6ull()) + if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sll()) return; /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig index 7053697f9b..aea85265ef 100644 --- a/arch/arm/mach-imx/mx7/Kconfig +++ b/arch/arm/mach-imx/mx7/Kconfig @@ -13,7 +13,6 @@ config MX7D select ROM_UNIFIED_SECTIONS imply CMD_FUSE bool - imply ENV_IS_IN_MMC choice prompt "MX7 board select" diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 4cf977e20a..87bf105f38 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -31,7 +31,7 @@ U_BOOT_DEVICE(imx7_thermal) = { }; #endif -#ifdef CONFIG_IMX_RDC +#if CONFIG_IS_ENABLED(IMX_RDC) /* * In current design, if any peripheral was assigned to both A7 and M4, * it will receive ipg_stop or ipg_wait when any of the 2 platforms enter @@ -245,8 +245,9 @@ int arch_cpu_init(void) mxs_dma_init(); #endif - if (IS_ENABLED(CONFIG_IMX_RDC)) - isolate_resource(); +#if CONFIG_IS_ENABLED(IMX_RDC) + isolate_resource(); +#endif return 0; } @@ -256,9 +257,9 @@ int arch_misc_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_mx7d()) - setenv("soc", "imx7d"); + env_set("soc", "imx7d"); else - setenv("soc", "imx7s"); + env_set("soc", "imx7s"); #endif return 0; diff --git a/arch/arm/mach-imx/video.c b/arch/arm/mach-imx/video.c index 55242f0eaa..c670c5dfc9 100644 --- a/arch/arm/mach-imx/video.c +++ b/arch/arm/mach-imx/video.c @@ -10,7 +10,7 @@ int board_video_skip(void) { int i; int ret; - char const *panel = getenv("panel"); + char const *panel = env_get("panel"); if (!panel) { for (i = 0; i < display_count; i++) { diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 5146e51f9c..d506ee5b39 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -11,13 +11,11 @@ config ARCH_INTEGRATOR_AP config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" select ARCH_CINTEGRATOR - imply ENV_IS_IN_FLASH endchoice config ARCH_CINTEGRATOR bool - imply ENV_IS_IN_FLASH choice prompt "Integrator core module select" diff --git a/arch/arm/mach-keystone/ddr3.c b/arch/arm/mach-keystone/ddr3.c index 4cad6a2d81..b2f5414a5c 100644 --- a/arch/arm/mach-keystone/ddr3.c +++ b/arch/arm/mach-keystone/ddr3.c @@ -331,7 +331,7 @@ void ddr3_check_ecc_int(u32 base) int ecc_test = 0; u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET); - env = getenv("ecc_test"); + env = env_get("ecc_test"); if (env) ecc_test = simple_strtol(env, NULL, 0); diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index beb8a767c4..fcabfbd5c3 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -46,7 +46,7 @@ int misc_init_r(void) char *env; long ks2_debug = 0; - env = getenv("ks2_debug"); + env = env_get("ks2_debug"); if (env) ks2_debug = simple_strtol(env, NULL, 0); diff --git a/arch/arm/mach-kirkwood/cpu.c b/arch/arm/mach-kirkwood/cpu.c index 4c9d3fde47..db2ff0311c 100644 --- a/arch/arm/mach-kirkwood/cpu.c +++ b/arch/arm/mach-kirkwood/cpu.c @@ -129,7 +129,7 @@ int kw_config_adr_windows(void) static void kw_sysrst_action(void) { int ret; - char *s = getenv("sysrstcmd"); + char *s = env_get("sysrstcmd"); if (!s) { debug("Error.. %s failed, check sysrstcmd\n", @@ -153,7 +153,7 @@ static void kw_sysrst_check(void) /* * no action if sysrstdelay environment variable is not defined */ - s = getenv("sysrstdelay"); + s = env_get("sysrstdelay"); if (s == NULL) return; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 1b12b33060..01d700bf2e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -32,7 +32,6 @@ config ARMADA_38X config ARMADA_XP bool select ARMADA_32BIT - imply ENV_IS_IN_SPI_FLASH # ARMv8 SoCs... config ARMADA_3700 diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index b0e193b78c..525576a4fc 100644 --- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c @@ -354,16 +354,16 @@ int serdes_phy_config(void) } info = board_serdes_cfg_get(PEX_MODE_GET(satr11)); - DEBUG_INIT_FULL_S("info->line0_7= 0x"); - DEBUG_INIT_FULL_D(info->line0_7, 8); - DEBUG_INIT_FULL_S(" info->line8_15= 0x"); - DEBUG_INIT_FULL_D(info->line8_15, 8); - DEBUG_INIT_FULL_S("\n"); if (info == NULL) { DEBUG_INIT_S("Hight speed PHY Error #1\n"); return MV_ERROR; } + DEBUG_INIT_FULL_S("info->line0_7= 0x"); + DEBUG_INIT_FULL_D(info->line0_7, 8); + DEBUG_INIT_FULL_S(" info->line8_15= 0x"); + DEBUG_INIT_FULL_D(info->line8_15, 8); + DEBUG_INIT_FULL_S("\n"); if (config_module & ETM_MODULE_DETECT) { /* step 0.9 ETM */ DEBUG_INIT_FULL_S("ETM module detect Step 0.9:\n"); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 89c91d1b77..72832ad099 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -170,4 +170,7 @@ source "board/ti/am335x/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" +config SPL_LDSCRIPT + default "arch/arm/mach-omap2/u-boot-spl.lds" + endif diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index d8abba992a..7260d27877 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -81,6 +81,7 @@ config TARGET_AM335X_SHC select DM select DM_SERIAL select DM_GPIO + imply CMD_SPL config TARGET_AM335X_SL50 bool "Support am335x_sl50" diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 700e6c2f79..26245aa169 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -10,6 +10,7 @@ #include <common.h> #include <ahci.h> +#include <environment.h> #include <spl.h> #include <asm/omap_common.h> #include <asm/arch/omap.h> @@ -240,8 +241,8 @@ void arch_preboot_os(void) int fb_set_reboot_flag(void) { printf("Setting reboot to fastboot flag ...\n"); - setenv("dofastboot", "1"); - saveenv(); + env_set("dofastboot", "1"); + env_save(); return 0; } #endif diff --git a/arch/arm/mach-omap2/omap3/emif4.c b/arch/arm/mach-omap2/omap3/emif4.c index d540cf08d2..8197e7b032 100644 --- a/arch/arm/mach-omap2/omap3/emif4.c +++ b/arch/arm/mach-omap2/omap3/emif4.c @@ -76,7 +76,7 @@ static void do_emif4_init(void) regval |= (1<<10); writel(regval, &emif4_base->sdram_iodft_tlgc); /*Wait till that bit clears*/ - while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1); + while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) != 0x0); /*Re-verify the DDR PHY status*/ while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0); diff --git a/arch/arm/mach-omap2/omap5/abb.c b/arch/arm/mach-omap2/omap5/abb.c index 3bf88979e5..1882c49e7d 100644 --- a/arch/arm/mach-omap2/omap5/abb.c +++ b/arch/arm/mach-omap2/omap5/abb.c @@ -28,8 +28,8 @@ s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) { u32 vset; - u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK; - u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK; + u32 fuse_enable_mask = OMAP5_PROD_ABB_FUSE_ENABLE_MASK; + u32 fuse_vset_mask = OMAP5_PROD_ABB_FUSE_VSET_MASK; if (!is_omap54xx()) { /* DRA7 */ diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c index a8a6b8a869..4ad6b530d2 100644 --- a/arch/arm/mach-omap2/omap5/hw_data.c +++ b/arch/arm/mach-omap2/omap5/hw_data.c @@ -329,6 +329,15 @@ struct vcores_data omap5430_volts_es2 = { .mm.addr = SMPS_REG_ADDR_45_IVA, .mm.pmic = &palmas, .mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK, + + .mpu.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MPU_OPNO_VMIN, + .mpu.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS, + + .core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN, + .core.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS, + + .mm.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MM_OPNO_VMIN, + .mm.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS, }; /* diff --git a/arch/arm/mach-omap2/sysinfo-common.c b/arch/arm/mach-omap2/sysinfo-common.c index 1dc7051ab3..4dab12a8d7 100644 --- a/arch/arm/mach-omap2/sysinfo-common.c +++ b/arch/arm/mach-omap2/sysinfo-common.c @@ -16,6 +16,15 @@ */ u32 get_device_type(void) { +#if defined(CONFIG_OMAP34XX) + /* + * On OMAP3 systems we call this early enough that we must just + * use the direct offset for safety. + */ + return (readl(OMAP34XX_CTRL_BASE + 0x2f0) & DEVICE_TYPE_MASK) >> + DEVICE_TYPE_SHIFT; +#else return (readl((*ctrl)->control_status) & DEVICE_TYPE_MASK) >> DEVICE_TYPE_SHIFT; +#endif } diff --git a/arch/arm/mach-omap2/utils.c b/arch/arm/mach-omap2/utils.c index 1946641eb9..0b0bf1837c 100644 --- a/arch/arm/mach-omap2/utils.c +++ b/arch/arm/mach-omap2/utils.c @@ -40,7 +40,7 @@ static void omap_set_fastboot_cpu(void) printf("Warning: fastboot.cpu: unknown CPU rev: %u\n", cpu_rev); } - setenv("fastboot.cpu", cpu); + env_set("fastboot.cpu", cpu); } static void omap_set_fastboot_secure(void) @@ -63,18 +63,18 @@ static void omap_set_fastboot_secure(void) printf("Warning: fastboot.secure: unknown CPU sec: %u\n", dev); } - setenv("fastboot.secure", secure); + env_set("fastboot.secure", secure); } static void omap_set_fastboot_board_rev(void) { const char *board_rev; - board_rev = getenv("board_rev"); + board_rev = env_get("board_rev"); if (board_rev == NULL) printf("Warning: fastboot.board_rev: unknown board revision\n"); - setenv("fastboot.board_rev", board_rev); + env_set("fastboot.board_rev", board_rev); } #ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV @@ -118,7 +118,7 @@ static void omap_set_fastboot_userdata_size(void) sprintf(buf, "%u", sz_kb); } - setenv("fastboot.userdata_size", buf); + env_set("fastboot.userdata_size", buf); } #else static inline void omap_set_fastboot_userdata_size(void) @@ -169,11 +169,11 @@ void omap_die_id_serial(void) omap_die_id((unsigned int *)&die_id); - if (!getenv("serial#")) { + if (!env_get("serial#")) { snprintf(serial_string, sizeof(serial_string), "%08x%08x", die_id[0], die_id[3]); - setenv("serial#", serial_string); + env_set("serial#", serial_string); } } @@ -182,7 +182,7 @@ void omap_die_id_get_board_serial(struct tag_serialnr *serialnr) char *serial_string; unsigned long long serial; - serial_string = getenv("serial#"); + serial_string = env_get("serial#"); if (serial_string) { serial = simple_strtoull(serial_string, NULL, 16); @@ -202,7 +202,7 @@ void omap_die_id_usbethaddr(void) omap_die_id((unsigned int *)&die_id); - if (!getenv("usbethaddr")) { + if (!env_get("usbethaddr")) { /* * Create a fake MAC address from the processor ID code. * First byte is 0x02 to signify locally administered. @@ -214,7 +214,7 @@ void omap_die_id_usbethaddr(void) mac[4] = die_id[0] & 0xff; mac[5] = (die_id[0] >> 8) & 0xff; - eth_setenv_enetaddr("usbethaddr", mac); + eth_env_set_enetaddr("usbethaddr", mac); } } diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 7644b8dc85..2984a3edda 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -15,4 +15,7 @@ config SYS_SOC source "board/LaCie/edminiv2/Kconfig" +config SPL_LDSCRIPT + default "$(CPUDIR)/orion5x/u-boot-spl.lds" if ORION5X + endif diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index c9246132e0..d9b25d5de4 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -67,14 +67,42 @@ config ROCKCHIP_RK3328 config ROCKCHIP_RK3368 bool "Support Rockchip RK3368" select ARM64 + select SUPPORT_SPL + select SUPPORT_TPL + select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL + select TPL_NEEDS_SEPARATE_STACK if TPL + imply SPL_SEPARATE_BSS + imply SPL_SERIAL_SUPPORT + imply TPL_SERIAL_SUPPORT + select ENABLE_ARM_SOC_BOOT0_HOOK + select DEBUG_UART_BOARD_INIT select SYS_NS16550 help - The Rockchip RK3328 is a ARM-based SoC with a octa-core Cortex-A53. - including NEON and GPU, 512KB L2 cache for big cluster and 256 KB - L2 cache for little cluser, PowerVR G6110 based graphics, one video - output processor supporting LVDS、HDMI、eDP, several DDR3 options - and video codec support. Peripherals include Gigabit Ethernet, - USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. + The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised + into a big and little cluster with 4 cores each) Cortex-A53 including + AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache + (for the little cluster), PowerVR G6110 based graphics, one video + output processor supporting LVDS/HDMI/eDP, several DDR3 options and + video codec support. + + On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, + I2S, UARTs, SPI, I2C and PWMs. + +if ROCKCHIP_RK3368 + +config TPL_LDSCRIPT + default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds" + +config TPL_TEXT_BASE + default 0xff8c1000 + +config TPL_MAX_SIZE + default 28672 + +config TPL_STACK + default 0xff8cffff + +endif config ROCKCHIP_RK3399 bool "Support Rockchip RK3399" @@ -101,10 +129,21 @@ config ROCKCHIP_RV1108 The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 and a DSP. -config ROCKCHIP_SPL_BACK_TO_BROM +config SPL_ROCKCHIP_BACK_TO_BROM bool "SPL returns to bootrom" default y if ROCKCHIP_RK3036 select ROCKCHIP_BROM_HELPER + depends on SPL + help + Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, + SPL will return to the boot rom, which will then load the U-Boot + binary to keep going on. + +config TPL_ROCKCHIP_BACK_TO_BROM + bool "TPL returns to bootrom" + default y if ROCKCHIP_RK3368 + select ROCKCHIP_BROM_HELPER + depends on TPL help Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, SPL will return to the boot rom, which will then load the U-Boot @@ -122,7 +161,7 @@ config ROCKCHIP_BROM_HELPER bool config SPL_MMC_SUPPORT - default y if !ROCKCHIP_SPL_BACK_TO_BROM + default y if !SPL_ROCKCHIP_BACK_TO_BROM source "arch/arm/mach-rockchip/rk3036/Kconfig" source "arch/arm/mach-rockchip/rk3188/Kconfig" diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index cb8d3efe4b..79e9704a2c 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -4,39 +4,50 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o - -ifdef CONFIG_TPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o -else ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o -obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o -obj-$(CONFIG_ROCKCHIP_BROM_HELPER) += save_boot_param.o -else +# We don't want the bootrom-helper present in a full U-Boot build, as +# this may have entered from ATF with the stack-pointer pointing to +# inaccessible/protected memory (and the bootrom-helper assumes that +# the stack-pointer is valid before switching to the U-Boot stack). +obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o +obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o save_boot_param.o + +obj-tpl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-tpl.o +obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o + +obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o +obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o +obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o + +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o -ifdef CONFIG_RAM -obj-y += sdram_common.o -endif endif + +obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o + ifndef CONFIG_ARM64 obj-y += rk_timer.o endif -obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ +obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ ifndef CONFIG_TPL_BUILD obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/ endif - obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/ obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/ obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/ obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/ obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/ obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/ + +# Clear out SPL objects, in case this is a TPL build +obj-spl-$(CONFIG_TPL_BUILD) = + +# Now add SPL/TPL objects back into the main build +obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y) +obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y) diff --git a/arch/arm/mach-rockchip/bootrom.c b/arch/arm/mach-rockchip/bootrom.c index 4ca9962310..8380e4e006 100644 --- a/arch/arm/mach-rockchip/bootrom.c +++ b/arch/arm/mach-rockchip/bootrom.c @@ -9,8 +9,8 @@ void back_to_bootrom(void) { -#if defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && !defined(CONFIG_TPL_BUILD) - puts("Returning to boot ROM..."); +#if CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) + puts("Returning to boot ROM...\n"); #endif _back_to_bootrom_s(); } diff --git a/arch/arm/mach-rockchip/rk3036-board.c b/arch/arm/mach-rockchip/rk3036-board.c index 26ea23b014..a3457f3914 100644 --- a/arch/arm/mach-rockchip/rk3036-board.c +++ b/arch/arm/mach-rockchip/rk3036-board.c @@ -34,11 +34,11 @@ static void setup_boot_mode(void) switch (boot_mode) { case BOOT_FASTBOOT: printf("enter fastboot!\n"); - setenv("preboot", "setenv preboot; fastboot usb0"); + env_set("preboot", "setenv preboot; fastboot usb0"); break; case BOOT_UMS: printf("enter UMS!\n"); - setenv("preboot", "setenv preboot; ums mmc 0"); + env_set("preboot", "setenv preboot; ums mmc 0"); break; } } diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c b/arch/arm/mach-rockchip/rk3188-board-spl.c index c3e174db9e..d3866bf029 100644 --- a/arch/arm/mach-rockchip/rk3188-board-spl.c +++ b/arch/arm/mach-rockchip/rk3188-board-spl.c @@ -167,8 +167,7 @@ void board_init_f(ulong dummy) } setup_arm_clock(); - -#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif } @@ -229,7 +228,7 @@ void spl_board_init(void) } preloader_console_init(); -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(); #endif return; diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c index 3e76100ad1..622e046dc0 100644 --- a/arch/arm/mach-rockchip/rk3188-board.c +++ b/arch/arm/mach-rockchip/rk3188-board.c @@ -39,7 +39,7 @@ int board_late_init(void) int board_init(void) { -#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) struct udevice *pinctrl; int ret; diff --git a/arch/arm/mach-rockchip/rk3188/Kconfig b/arch/arm/mach-rockchip/rk3188/Kconfig index d129fcda99..2bb35662d1 100644 --- a/arch/arm/mach-rockchip/rk3188/Kconfig +++ b/arch/arm/mach-rockchip/rk3188/Kconfig @@ -30,9 +30,6 @@ config TPL_LIBCOMMON_SUPPORT config TPL_LIBGENERIC_SUPPORT default y -config TPL_SERIAL_SUPPORT - default y - source "board/radxa/rock/Kconfig" endif diff --git a/arch/arm/mach-rockchip/rk322x-board-spl.c b/arch/arm/mach-rockchip/rk322x-board-spl.c index 15216c74b0..4ddb8ba065 100644 --- a/arch/arm/mach-rockchip/rk322x-board-spl.c +++ b/arch/arm/mach-rockchip/rk322x-board-spl.c @@ -41,6 +41,8 @@ static struct rk322x_grf * const grf = (void *)GRF_BASE; CON_IOMUX_UART2SEL_MASK, CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT); } + +#define SGRF_DDR_CON0 0x10150000 void board_init_f(ulong dummy) { struct udevice *dev; @@ -71,6 +73,8 @@ void board_init_f(ulong dummy) return; } + /* Disable the ddr secure region setting to make it non-secure */ + rk_clrreg(SGRF_DDR_CON0, 0x4000); #if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif diff --git a/arch/arm/mach-rockchip/rk322x-board.c b/arch/arm/mach-rockchip/rk322x-board.c index b6543a5108..1e79c19309 100644 --- a/arch/arm/mach-rockchip/rk322x-board.c +++ b/arch/arm/mach-rockchip/rk322x-board.c @@ -30,11 +30,11 @@ static void setup_boot_mode(void) switch (boot_mode) { case BOOT_FASTBOOT: printf("enter fastboot!\n"); - setenv("preboot", "setenv preboot; fastboot usb0"); + env_set("preboot", "setenv preboot; fastboot usb0"); break; case BOOT_UMS: printf("enter UMS!\n"); - setenv("preboot", "setenv preboot; ums mmc 0"); + env_set("preboot", "setenv preboot; ums mmc 0"); break; } } diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index 5668fd28a0..6b7bf85d8d 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -249,7 +249,7 @@ void board_init_f(ulong dummy) debug("DRAM init failed: %d\n", ret); return; } -#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif } @@ -316,7 +316,7 @@ void spl_board_init(void) } preloader_console_init(); -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(); #endif return; diff --git a/arch/arm/mach-rockchip/rk3288-board.c b/arch/arm/mach-rockchip/rk3288-board.c index 613967c307..74c6cc14a1 100644 --- a/arch/arm/mach-rockchip/rk3288-board.c +++ b/arch/arm/mach-rockchip/rk3288-board.c @@ -37,11 +37,11 @@ static void setup_boot_mode(void) switch (boot_mode) { case BOOT_FASTBOOT: printf("enter fastboot!\n"); - setenv("preboot", "setenv preboot; fastboot usb0"); + env_set("preboot", "setenv preboot; fastboot usb0"); break; case BOOT_UMS: printf("enter UMS!\n"); - setenv("preboot", "setenv preboot; if mmc dev 0;" + env_set("preboot", "setenv preboot; if mmc dev 0;" "then ums mmc 0; else ums mmc 1;fi"); break; } @@ -78,7 +78,7 @@ int board_late_init(void) return rk_board_late_init(); } -#ifndef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if !CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) static int veyron_init(void) { struct udevice *dev; @@ -115,7 +115,7 @@ static int veyron_init(void) int board_init(void) { -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) struct udevice *pinctrl; int ret; diff --git a/arch/arm/mach-rockchip/rk3368-board-spl.c b/arch/arm/mach-rockchip/rk3368-board-spl.c new file mode 100644 index 0000000000..cabf344486 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3368-board-spl.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <debug_uart.h> +#include <dm.h> +#include <dm/pinctrl.h> +#include <ram.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cru_rk3368.h> +#include <asm/arch/grf_rk3368.h> +#include <asm/arch/hardware.h> +#include <asm/arch/periph.h> +#include <asm/arch/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +void board_debug_uart_init(void) +{ +} + +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + /* Set up our preloader console */ + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + error("%s: pinctrl init failed: %d\n", __func__, ret); + hang(); + } + + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART0); + if (ret) { + error("%s: failed to set up console UART\n", __func__); + hang(); + } + + preloader_console_init(); + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +u32 spl_boot_mode(const u32 boot_device) +{ + return MMCSD_MODE_RAW; +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif diff --git a/arch/arm/mach-rockchip/rk3368-board-tpl.c b/arch/arm/mach-rockchip/rk3368-board-tpl.c new file mode 100644 index 0000000000..b3e6ffa781 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3368-board-tpl.c @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <debug_uart.h> +#include <dm.h> +#include <ram.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/bootrom.h> +#include <asm/arch/cru_rk3368.h> +#include <asm/arch/grf_rk3368.h> +#include <asm/arch/hardware.h> +#include <asm/arch/timer.h> +#include <syscon.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * The SPL (and also the full U-Boot stage on the RK3368) will run in + * secure mode (i.e. EL3) and an ATF will eventually be booted before + * starting up the operating system... so we can initialize the SGRF + * here and rely on the ATF installing the final (secure) policy + * later. + */ +static inline uintptr_t sgrf_soc_con_addr(unsigned no) +{ + const uintptr_t SGRF_BASE = + (uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); + + return SGRF_BASE + sizeof(u32) * no; +} + +static inline uintptr_t sgrf_busdmac_addr(unsigned no) +{ + const uintptr_t SGRF_BASE = + (uintptr_t)syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); + const uintptr_t SGRF_BUSDMAC_OFFSET = 0x100; + const uintptr_t SGRF_BUSDMAC_BASE = SGRF_BASE + SGRF_BUSDMAC_OFFSET; + + return SGRF_BUSDMAC_BASE + sizeof(u32) * no; +} + +static void sgrf_init(void) +{ + struct rk3368_cru * const cru = + (struct rk3368_cru * const)rockchip_get_cru(); + const u16 SGRF_SOC_CON_SEC = GENMASK(15, 0); + const u16 SGRF_BUSDMAC_CON0_SEC = BIT(2); + const u16 SGRF_BUSDMAC_CON1_SEC = GENMASK(15, 12); + + /* Set all configurable IP to 'non secure'-mode */ + rk_setreg(sgrf_soc_con_addr(5), SGRF_SOC_CON_SEC); + rk_setreg(sgrf_soc_con_addr(6), SGRF_SOC_CON_SEC); + rk_setreg(sgrf_soc_con_addr(7), SGRF_SOC_CON_SEC); + + /* + * From rockchip-uboot/arch/arm/cpu/armv8/rk33xx/cpu.c + * Original comment: "ddr space set no secure mode" + */ + rk_clrreg(sgrf_soc_con_addr(8), SGRF_SOC_CON_SEC); + rk_clrreg(sgrf_soc_con_addr(9), SGRF_SOC_CON_SEC); + rk_clrreg(sgrf_soc_con_addr(10), SGRF_SOC_CON_SEC); + + /* Set 'secure dma' to 'non secure'-mode */ + rk_setreg(sgrf_busdmac_addr(0), SGRF_BUSDMAC_CON0_SEC); + rk_setreg(sgrf_busdmac_addr(1), SGRF_BUSDMAC_CON1_SEC); + + dsb(); /* barrier */ + + rk_setreg(&cru->softrst_con[1], DMA1_SRST_REQ); + rk_setreg(&cru->softrst_con[4], DMA2_SRST_REQ); + + dsb(); /* barrier */ + udelay(10); + + rk_clrreg(&cru->softrst_con[1], DMA1_SRST_REQ); + rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ); +} + +void board_debug_uart_init(void) +{ + /* + * N.B.: This is called before the device-model has been + * initialised. For this reason, we can not access + * the GRF address range using the syscon API. + */ + struct rk3368_grf * const grf = + (struct rk3368_grf * const)0xff770000; + + enum { + GPIO2D1_MASK = GENMASK(3, 2), + GPIO2D1_GPIO = 0, + GPIO2D1_UART0_SOUT = (1 << 2), + + GPIO2D0_MASK = GENMASK(1, 0), + GPIO2D0_GPIO = 0, + GPIO2D0_UART0_SIN = (1 << 0), + }; + +#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) + /* Enable early UART0 on the RK3368 */ + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D0_MASK, GPIO2D0_UART0_SIN); + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D1_MASK, GPIO2D1_UART0_SOUT); +#endif +} + +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + +#define EARLY_UART +#ifdef EARLY_UART + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); + printascii("U-Boot TPL board init\n"); +#endif + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + /* Reset security, so we can use DMA in the MMC drivers */ + sgrf_init(); + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +void board_return_to_bootrom(void) +{ + back_to_bootrom(); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_BOOTROM; +} diff --git a/arch/arm/mach-rockchip/rk3368/Kconfig b/arch/arm/mach-rockchip/rk3368/Kconfig index 6d32068920..7c9b722b00 100644 --- a/arch/arm/mach-rockchip/rk3368/Kconfig +++ b/arch/arm/mach-rockchip/rk3368/Kconfig @@ -3,6 +3,26 @@ if ROCKCHIP_RK3368 choice prompt "RK3368 board" +config TARGET_LION_RK3368 + bool "Theobroma Systems RK3368-uQ7 (Lion) module" + help + The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm, + MXM-230 connector) system-on-module designed by Theobroma + Systems for industrial applications. + + It provides the following features: + - 8x Cortex-A53 (in 2 clusters of 4 cores each) + - (on-module) up to 4GB of DDR3 memory + - (on-module) SPI-NOR flash + - (on-module) eMMC + - Gigabit Ethernet (with an on-module KSZ9031 PHY) + - USB + - HDMI + - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) + - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...) + - on-module STM32 providing CAN, RTC and fan-control + - (optional on-module) EAL4+-certified security module + config TARGET_SHEEP bool "Sheep board" help @@ -25,8 +45,12 @@ endchoice config SYS_SOC default "rockchip" +source "board/theobroma-systems/lion_rk3368/Kconfig" source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig" +config SPL_LDSCRIPT + default "arch/arm/cpu/armv8/u-boot-spl.lds" + endif diff --git a/arch/arm/mach-rockchip/rk3368/Makefile b/arch/arm/mach-rockchip/rk3368/Makefile index 0390716410..46798c2e93 100644 --- a/arch/arm/mach-rockchip/rk3368/Makefile +++ b/arch/arm/mach-rockchip/rk3368/Makefile @@ -5,5 +5,4 @@ # obj-y += clk_rk3368.o obj-y += rk3368.o -obj-y += sdram_rk3368.o obj-y += syscon_rk3368.o diff --git a/arch/arm/mach-rockchip/rk3368/sdram_rk3368.c b/arch/arm/mach-rockchip/rk3368/sdram_rk3368.c deleted file mode 100644 index d0d090087b..0000000000 --- a/arch/arm/mach-rockchip/rk3368/sdram_rk3368.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd. - * - * SPDX-License-Identifier: GPL-2.0 - */ - -#include <common.h> -#include <dm.h> -#include <ram.h> -#include <syscon.h> -#include <asm/arch/clock.h> -#include <asm/arch/grf_rk3368.h> -#include <asm/arch/sdram_common.h> - -DECLARE_GLOBAL_DATA_PTR; -struct dram_info { - struct ram_info info; - struct rk3368_pmu_grf *pmugrf; -}; - -static int rk3368_dmc_probe(struct udevice *dev) -{ - struct dram_info *priv = dev_get_priv(dev); - - priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); - debug("%s: grf=%p\n", __func__, priv->pmugrf); - priv->info.base = CONFIG_SYS_SDRAM_BASE; - priv->info.size = rockchip_sdram_size( - (phys_addr_t)&priv->pmugrf->os_reg[2]); - - return 0; -} - -static int rk3368_dmc_get_info(struct udevice *dev, struct ram_info *info) -{ - struct dram_info *priv = dev_get_priv(dev); - - *info = priv->info; - - return 0; -} - -static struct ram_ops rk3368_dmc_ops = { - .get_info = rk3368_dmc_get_info, -}; - - -static const struct udevice_id rk3368_dmc_ids[] = { - { .compatible = "rockchip,rk3368-dmc" }, - { } -}; - -U_BOOT_DRIVER(dmc_rk3368) = { - .name = "rockchip_rk3368_dmc", - .id = UCLASS_RAM, - .of_match = rk3368_dmc_ids, - .ops = &rk3368_dmc_ops, - .probe = rk3368_dmc_probe, - .priv_auto_alloc_size = sizeof(struct dram_info), -}; diff --git a/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c b/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c index 03e97eb629..99d51f0edc 100644 --- a/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/syscon_rk3368.c @@ -1,6 +1,8 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan <andy.yan@rock-chips.com> + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * * SPDX-License-Identifier: GPL-2.0+ */ @@ -14,6 +16,10 @@ static const struct udevice_id rk3368_syscon_ids[] = { .data = ROCKCHIP_SYSCON_GRF }, { .compatible = "rockchip,rk3368-pmugrf", .data = ROCKCHIP_SYSCON_PMUGRF }, + { .compatible = "rockchip,rk3368-msch", + .data = ROCKCHIP_SYSCON_MSCH }, + { .compatible = "rockchip,rk3368-sgrf", + .data = ROCKCHIP_SYSCON_SGRF }, { } }; @@ -22,3 +28,41 @@ U_BOOT_DRIVER(syscon_rk3368) = { .id = UCLASS_SYSCON, .of_match = rk3368_syscon_ids, }; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +static int rk3368_syscon_bind_of_platdata(struct udevice *dev) +{ + dev->driver_data = dev->driver->of_match->data; + debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data); + + return 0; +} + +U_BOOT_DRIVER(rockchip_rk3368_grf) = { + .name = "rockchip_rk3368_grf", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids, + .bind = rk3368_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_rk3368_pmugrf) = { + .name = "rockchip_rk3368_pmugrf", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids + 1, + .bind = rk3368_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_rk3368_msch) = { + .name = "rockchip_rk3368_msch", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids + 2, + .bind = rk3368_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_rk3368_sgrf) = { + .name = "rockchip_rk3368_sgrf", + .id = UCLASS_SYSCON, + .of_match = rk3368_syscon_ids + 3, + .bind = rk3368_syscon_bind_of_platdata, +}; +#endif diff --git a/arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds b/arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds new file mode 100644 index 0000000000..cc59844735 --- /dev/null +++ b/arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds @@ -0,0 +1,13 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#undef CONFIG_SPL_TEXT_BASE +#define CONFIG_SPL_TEXT_BASE CONFIG_TPL_TEXT_BASE + +#undef CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_MAX_SIZE CONFIG_TPL_MAX_SIZE + +#include "../../cpu/armv8/u-boot-spl.lds" diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index e050affac0..a13b717bbd 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -8,9 +8,6 @@ #include <debug_uart.h> #include <dm.h> #include <fdtdec.h> -#include <led.h> -#include <malloc.h> -#include <mmc.h> #include <ram.h> #include <spl.h> #include <asm/gpio.h> @@ -21,111 +18,10 @@ #include <asm/arch/sdram.h> #include <asm/arch/timer.h> #include <dm/pinctrl.h> -#include <dm/root.h> -#include <dm/test.h> -#include <dm/util.h> #include <power/regulator.h> DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OF_CONTROL) -static int spl_node_to_boot_device(int node) -{ - struct udevice *parent; - - /* - * This should eventually move into the SPL code, once SPL becomes - * aware of the block-device layer. Until then (and to avoid unneeded - * delays in getting this feature out, it lives at the board-level). - */ - if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { - struct udevice *dev; - struct blk_desc *desc = NULL; - - for (device_find_first_child(parent, &dev); - dev; - device_find_next_child(&dev)) { - if (device_get_uclass_id(dev) == UCLASS_BLK) { - desc = dev_get_uclass_platdata(dev); - break; - } - } - - if (!desc) - return -ENOENT; - - switch (desc->devnum) { - case 0: - return BOOT_DEVICE_MMC1; - case 1: - return BOOT_DEVICE_MMC2; - default: - return -ENOSYS; - } - } - - /* - * SPL doesn't differentiate SPI flashes, so we keep the detection - * brief and inaccurate... hopefully, the common SPL layer can be - * extended with awareness of the BLK layer (and matching OF_CONTROL) - * soon. - */ - if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent)) - return BOOT_DEVICE_SPI; - - return -1; -} - -void board_boot_order(u32 *spl_boot_list) -{ - const void *blob = gd->fdt_blob; - int chosen_node = fdt_path_offset(blob, "/chosen"); - int idx = 0; - int elem; - int boot_device; - int node; - const char *conf; - - if (chosen_node < 0) { - debug("%s: /chosen not found, using spl_boot_device()\n", - __func__); - spl_boot_list[0] = spl_boot_device(); - return; - } - - for (elem = 0; - (conf = fdt_stringlist_get(blob, chosen_node, - "u-boot,spl-boot-order", elem, NULL)); - elem++) { - /* First check if the list element is an alias */ - const char *alias = fdt_get_alias(blob, conf); - if (alias) - conf = alias; - - /* Try to resolve the config item (or alias) as a path */ - node = fdt_path_offset(blob, conf); - if (node < 0) { - debug("%s: could not find %s in FDT", __func__, conf); - continue; - } - - /* Try to map this back onto SPL boot devices */ - boot_device = spl_node_to_boot_device(node); - if (boot_device < 0) { - debug("%s: could not map node @%x to a boot-device\n", - __func__, node); - continue; - } - - spl_boot_list[idx++] = boot_device; - } - - /* If we had no matches, fall back to spl_boot_device */ - if (idx == 0) - spl_boot_list[0] = spl_boot_device(); -} -#endif - u32 spl_boot_device(void) { return BOOT_DEVICE_MMC1; @@ -263,7 +159,7 @@ void spl_board_init(void) } preloader_console_init(); -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) back_to_bootrom(); #endif diff --git a/arch/arm/mach-rockchip/save_boot_param.S b/arch/arm/mach-rockchip/save_boot_param.S index 5e6c8dba13..50fce207a5 100644 --- a/arch/arm/mach-rockchip/save_boot_param.S +++ b/arch/arm/mach-rockchip/save_boot_param.S @@ -1,11 +1,47 @@ /* * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * * SPDX-License-Identifier: GPL-2.0+ */ #include <linux/linkage.h> +#if defined(CONFIG_ARM64) +.globl SAVE_SP_ADDR +SAVE_SP_ADDR: + .quad 0 + +ENTRY(save_boot_params) + sub sp, sp, #0x60 + stp x29, x30, [sp, #0x50] + stp x27, x28, [sp, #0x40] + stp x25, x26, [sp, #0x30] + stp x23, x24, [sp, #0x20] + stp x21, x22, [sp, #0x10] + stp x19, x20, [sp, #0] + ldr x8, =SAVE_SP_ADDR + mov x9, sp + str x9, [x8] + b save_boot_params_ret /* back to my caller */ +ENDPROC(save_boot_params) + +.globl _back_to_bootrom_s +ENTRY(_back_to_bootrom_s) + ldr x0, =SAVE_SP_ADDR + ldr x0, [x0] + mov sp, x0 + ldp x29, x30, [sp, #0x50] + ldp x27, x28, [sp, #0x40] + ldp x25, x26, [sp, #0x30] + ldp x23, x24, [sp, #0x20] + ldp x21, x22, [sp, #0x10] + ldp x19, x20, [sp] + add sp, sp, #0x60 + mov x0, xzr + ret +ENDPROC(_back_to_bootrom_s) +#else .globl SAVE_SP_ADDR SAVE_SP_ADDR: .word 0 @@ -30,3 +66,4 @@ ENTRY(_back_to_bootrom_s) mov r0, #0 pop {r1-r12, pc} ENDPROC(_back_to_bootrom_s) +#endif diff --git a/arch/arm/mach-rockchip/spl-boot-order.c b/arch/arm/mach-rockchip/spl-boot-order.c new file mode 100644 index 0000000000..4f78c72720 --- /dev/null +++ b/arch/arm/mach-rockchip/spl-boot-order.c @@ -0,0 +1,108 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <mmc.h> +#include <spl.h> + +#if CONFIG_IS_ENABLED(OF_CONTROL) +static int spl_node_to_boot_device(int node) +{ + struct udevice *parent; + + /* + * This should eventually move into the SPL code, once SPL becomes + * aware of the block-device layer. Until then (and to avoid unneeded + * delays in getting this feature out, it lives at the board-level). + */ + if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { + struct udevice *dev; + struct blk_desc *desc = NULL; + + for (device_find_first_child(parent, &dev); + dev; + device_find_next_child(&dev)) { + if (device_get_uclass_id(dev) == UCLASS_BLK) { + desc = dev_get_uclass_platdata(dev); + break; + } + } + + if (!desc) + return -ENOENT; + + switch (desc->devnum) { + case 0: + return BOOT_DEVICE_MMC1; + case 1: + return BOOT_DEVICE_MMC2; + default: + return -ENOSYS; + } + } + + /* + * SPL doesn't differentiate SPI flashes, so we keep the detection + * brief and inaccurate... hopefully, the common SPL layer can be + * extended with awareness of the BLK layer (and matching OF_CONTROL) + * soon. + */ + if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent)) + return BOOT_DEVICE_SPI; + + return -1; +} + +void board_boot_order(u32 *spl_boot_list) +{ + const void *blob = gd->fdt_blob; + int chosen_node = fdt_path_offset(blob, "/chosen"); + int idx = 0; + int elem; + int boot_device; + int node; + const char *conf; + + if (chosen_node < 0) { + debug("%s: /chosen not found, using spl_boot_device()\n", + __func__); + spl_boot_list[0] = spl_boot_device(); + return; + } + + for (elem = 0; + (conf = fdt_stringlist_get(blob, chosen_node, + "u-boot,spl-boot-order", elem, NULL)); + elem++) { + /* First check if the list element is an alias */ + const char *alias = fdt_get_alias(blob, conf); + if (alias) + conf = alias; + + /* Try to resolve the config item (or alias) as a path */ + node = fdt_path_offset(blob, conf); + if (node < 0) { + debug("%s: could not find %s in FDT", __func__, conf); + continue; + } + + /* Try to map this back onto SPL boot devices */ + boot_device = spl_node_to_boot_device(node); + if (boot_device < 0) { + debug("%s: could not map node @%x to a boot-device\n", + __func__, node); + continue; + } + + spl_boot_list[idx++] = boot_device; + } + + /* If we had no matches, fall back to spl_boot_device */ + if (idx == 0) + spl_boot_list[0] = spl_boot_device(); +} +#endif diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c index 49b26b3570..2f1da740fb 100644 --- a/arch/arm/mach-socfpga/misc_gen5.c +++ b/arch/arm/mach-socfpga/misc_gen5.c @@ -219,9 +219,9 @@ int arch_misc_init(void) { const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7; const int fpga_id = socfpga_fpga_id(0); - setenv("bootmode", bsel_str[bsel].mode); + env_set("bootmode", bsel_str[bsel].mode); if (fpga_id >= 0) - setenv("fpgatype", socfpga_fpga_model[fpga_id].var); + env_set("fpgatype", socfpga_fpga_model[fpga_id].var); return socfpga_eth_reset(); } #endif diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig index 8f4371429f..f70f5ec965 100644 --- a/arch/arm/mach-stm32/Kconfig +++ b/arch/arm/mach-stm32/Kconfig @@ -3,9 +3,6 @@ if STM32 config STM32F4 bool "stm32f4 family" -config STM32F1 - bool "stm32f1 family" - config STM32F7 bool "stm32f7 family" select SUPPORT_SPL @@ -29,7 +26,6 @@ config STM32F7 select SPL_XIP_SUPPORT source "arch/arm/mach-stm32/stm32f4/Kconfig" -source "arch/arm/mach-stm32/stm32f1/Kconfig" source "arch/arm/mach-stm32/stm32f7/Kconfig" endif diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile index ffc537f35b..6b7694471f 100644 --- a/arch/arm/mach-stm32/Makefile +++ b/arch/arm/mach-stm32/Makefile @@ -5,6 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_STM32F1) += stm32f1/ obj-$(CONFIG_STM32F4) += stm32f4/ obj-$(CONFIG_STM32F7) += stm32f7/ diff --git a/arch/arm/mach-stm32/stm32f1/Kconfig b/arch/arm/mach-stm32/stm32f1/Kconfig deleted file mode 100644 index f627fd2541..0000000000 --- a/arch/arm/mach-stm32/stm32f1/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -if STM32F1 - -endif diff --git a/arch/arm/mach-stm32/stm32f1/Makefile b/arch/arm/mach-stm32/stm32f1/Makefile deleted file mode 100644 index e2081dbf9e..0000000000 --- a/arch/arm/mach-stm32/stm32f1/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2015 -# Kamil Lulko, <kamil.lulko@gmail.com> -# -# Copyright 2015 ATS Advanced Telematics Systems GmbH -# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += soc.o clock.o timer.o flash.o diff --git a/arch/arm/mach-stm32/stm32f1/clock.c b/arch/arm/mach-stm32/stm32f1/clock.c deleted file mode 100644 index 28208485d4..0000000000 --- a/arch/arm/mach-stm32/stm32f1/clock.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * (C) Copyright 2014 - * STMicroelectronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/stm32.h> - -#define RCC_CR_HSION (1 << 0) -#define RCC_CR_HSEON (1 << 16) -#define RCC_CR_HSERDY (1 << 17) -#define RCC_CR_HSEBYP (1 << 18) -#define RCC_CR_CSSON (1 << 19) -#define RCC_CR_PLLON (1 << 24) -#define RCC_CR_PLLRDY (1 << 25) - -#define RCC_CFGR_PLLMUL_MASK 0x3C0000 -#define RCC_CFGR_PLLMUL_SHIFT 18 -#define RCC_CFGR_PLLSRC_HSE (1 << 16) - -#define RCC_CFGR_AHB_PSC_MASK 0xF0 -#define RCC_CFGR_APB1_PSC_MASK 0x700 -#define RCC_CFGR_APB2_PSC_MASK 0x3800 -#define RCC_CFGR_SW0 (1 << 0) -#define RCC_CFGR_SW1 (1 << 1) -#define RCC_CFGR_SW_MASK 0x3 -#define RCC_CFGR_SW_HSI 0 -#define RCC_CFGR_SW_HSE RCC_CFGR_SW0 -#define RCC_CFGR_SW_PLL RCC_CFGR_SW1 -#define RCC_CFGR_SWS0 (1 << 2) -#define RCC_CFGR_SWS1 (1 << 3) -#define RCC_CFGR_SWS_MASK 0xC -#define RCC_CFGR_SWS_HSI 0 -#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 -#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 -#define RCC_CFGR_HPRE_SHIFT 4 -#define RCC_CFGR_PPRE1_SHIFT 8 -#define RCC_CFGR_PPRE2_SHIFT 11 - -#define RCC_APB1ENR_PWREN (1 << 28) - -#define PWR_CR_VOS0 (1 << 14) -#define PWR_CR_VOS1 (1 << 15) -#define PWR_CR_VOS_MASK 0xC000 -#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1) -#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1) -#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0) - -#define FLASH_ACR_WS(n) n -#define FLASH_ACR_PRFTEN (1 << 8) -#define FLASH_ACR_ICEN (1 << 9) -#define FLASH_ACR_DCEN (1 << 10) - -struct psc { - u8 ahb_psc; - u8 apb1_psc; - u8 apb2_psc; -}; - -#define AHB_PSC_1 0 -#define AHB_PSC_2 0x8 -#define AHB_PSC_4 0x9 -#define AHB_PSC_8 0xA -#define AHB_PSC_16 0xB -#define AHB_PSC_64 0xC -#define AHB_PSC_128 0xD -#define AHB_PSC_256 0xE -#define AHB_PSC_512 0xF - -#define APB_PSC_1 0 -#define APB_PSC_2 0x4 -#define APB_PSC_4 0x5 -#define APB_PSC_8 0x6 -#define APB_PSC_16 0x7 - -#if !defined(CONFIG_STM32_HSE_HZ) -#error "CONFIG_STM32_HSE_HZ not defined!" -#else -#if (CONFIG_STM32_HSE_HZ == 8000000) -#define RCC_CFGR_PLLMUL_CFG 0x7 -struct psc psc_hse = { - .ahb_psc = AHB_PSC_1, - .apb1_psc = APB_PSC_2, - .apb2_psc = APB_PSC_1 -}; -#else -#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" -#endif -#endif - -int configure_clocks(void) -{ - /* Reset RCC configuration */ - setbits_le32(&STM32_RCC->cr, RCC_CR_HSION); - writel(0, &STM32_RCC->cfgr); /* Reset CFGR */ - clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON - | RCC_CR_PLLON)); - clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP); - writel(0, &STM32_RCC->cir); /* Disable all interrupts */ - - /* Configure for HSE+PLL operation */ - setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON); - while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) - ; - - /* Enable high performance mode, System frequency up to 168 MHz */ - setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); - writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); - - setbits_le32(&STM32_RCC->cfgr, - RCC_CFGR_PLLMUL_CFG << RCC_CFGR_PLLMUL_SHIFT); - setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_PLLSRC_HSE); - setbits_le32(&STM32_RCC->cfgr, (( - psc_hse.ahb_psc << RCC_CFGR_HPRE_SHIFT) - | (psc_hse.apb1_psc << RCC_CFGR_PPRE1_SHIFT) - | (psc_hse.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); - - setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON); - - while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY)) - ; - - /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ - writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN - | FLASH_ACR_DCEN, &STM32_FLASH->acr); - - clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); - setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL); - - while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) != - RCC_CFGR_SWS_PLL) - ; - - return 0; -} - -unsigned long clock_get(enum clock clck) -{ - u32 sysclk = 0; - u32 shift = 0; - /* PLL table lookups for clock computation */ - u8 pll_mul_table[16] = { - 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16 - }; - /* Prescaler table lookups for clock computation */ - u8 ahb_psc_table[16] = { - 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 - }; - u8 apb_psc_table[8] = { - 0, 0, 0, 0, 1, 2, 3, 4 - }; - - if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) == - RCC_CFGR_SWS_PLL) { - u16 pll; - pll = ((readl(&STM32_RCC->cfgr) & RCC_CFGR_PLLMUL_MASK) - >> RCC_CFGR_PLLMUL_SHIFT); - sysclk = CONFIG_STM32_HSE_HZ * pll_mul_table[pll]; - } - - switch (clck) { - case CLOCK_CORE: - return sysclk; - break; - case CLOCK_AHB: - shift = ahb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK) - >> RCC_CFGR_HPRE_SHIFT)]; - return sysclk >>= shift; - break; - case CLOCK_APB1: - shift = apb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK) - >> RCC_CFGR_PPRE1_SHIFT)]; - return sysclk >>= shift; - break; - case CLOCK_APB2: - shift = apb_psc_table[( - (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK) - >> RCC_CFGR_PPRE2_SHIFT)]; - return sysclk >>= shift; - break; - default: - return 0; - break; - } -} diff --git a/arch/arm/mach-stm32/stm32f1/flash.c b/arch/arm/mach-stm32/stm32f1/flash.c deleted file mode 100644 index 7d41f63733..0000000000 --- a/arch/arm/mach-stm32/stm32f1/flash.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/stm32.h> - -#define STM32_FLASH_KEY1 0x45670123 -#define STM32_FLASH_KEY2 0xcdef89ab - -#define STM32_NUM_BANKS 2 -#define STM32_MAX_BANK 0x200 - -flash_info_t flash_info[STM32_NUM_BANKS]; -static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS]; - -static void stm32f1_flash_lock(u8 bank, u8 lock) -{ - if (lock) { - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK); - } else { - writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr); - writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr); - } -} - -/* Only XL devices are supported (2 KiB sector size) */ -unsigned long flash_init(void) -{ - u8 i, banks; - u16 j, size; - - /* Set up accessors for XL devices with wonky register layout */ - flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr; - flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2; - - /* - * Get total flash size (in KiB) and configure number of banks - * present and sector count per bank. - */ - size = readw(&STM32_DES->flash_size); - if (size <= STM32_MAX_BANK) { - banks = 1; - flash_info[0].sector_count = size >> 1; - } else if (size > STM32_MAX_BANK) { - banks = 2; - flash_info[0].sector_count = STM32_MAX_BANK >> 1; - flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1; - } - - /* Configure start/size for all sectors */ - for (i = 0; i < banks; i++) { - flash_info[i].flash_id = FLASH_STM32F1; - flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19); - flash_info[i].size = 2048; - for (j = 1; (j < flash_info[i].sector_count); j++) { - flash_info[i].start[j] = flash_info[i].start[j - 1] - + 2048; - flash_info[i].size += 2048; - } - } - - return size << 10; -} - -void flash_print_info(flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Missing or unknown FLASH type\n"); - return; - } else if (info->flash_id == FLASH_STM32F1) { - printf("STM32F1 Embedded Flash\n"); - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf("\n"); - return; -} - -int flash_erase(flash_info_t *info, int first, int last) -{ - u8 bank = 0xff; - int i; - - for (i = 0; i < STM32_NUM_BANKS; i++) { - if (info == &flash_info[i]) { - bank = i; - break; - } - } - if (bank == 0xff) - return -1; - - stm32f1_flash_lock(bank, 0); - - for (i = first; i <= last; i++) { - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); - - writel(info->start[i], &flash_bank[bank]->ar); - - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT); - - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - } - - clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER); - - stm32f1_flash_lock(bank, 1); - - return 0; -} - -int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong i; - u8 bank = 0xff; - - if (addr & 1) { - printf("Flash address must be half word aligned\n"); - return -1; - } - - if (cnt & 1) { - printf("Flash length must be half word aligned\n"); - return -1; - } - - for (i = 0; i < 2; i++) { - if (info == &flash_info[i]) { - bank = i; - break; - } - } - - if (bank == 0xff) - return -1; - - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - - stm32f1_flash_lock(bank, 0); - - setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); - - /* STM32F1 requires half word writes */ - for (i = 0; i < cnt >> 1; i++) { - *(u16 *)(addr + i * 2) = ((u16 *)src)[i]; - while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY) - ; - } - - clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG); - - stm32f1_flash_lock(bank, 1); - - return 0; -} diff --git a/arch/arm/mach-stm32/stm32f1/soc.c b/arch/arm/mach-stm32/stm32f1/soc.c deleted file mode 100644 index 4438621b9a..0000000000 --- a/arch/arm/mach-stm32/stm32f1/soc.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/armv7m.h> -#include <asm/arch/stm32.h> - -u32 get_cpu_rev(void) -{ - return 0; -} - -int arch_cpu_init(void) -{ - configure_clocks(); - - /* - * Configure the memory protection unit (MPU) to allow full access to - * the whole 4GB address space. - */ - writel(0, &V7M_MPU->rnr); - writel(0, &V7M_MPU->rbar); - writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB - | V7M_MPU_RASR_EN), &V7M_MPU->rasr); - writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl); - - return 0; -} diff --git a/arch/arm/mach-stm32/stm32f1/timer.c b/arch/arm/mach-stm32/stm32f1/timer.c deleted file mode 100644 index 6a261986e9..0000000000 --- a/arch/arm/mach-stm32/stm32f1/timer.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2015 - * Kamil Lulko, <kamil.lulko@gmail.com> - * - * Copyright 2015 ATS Advanced Telematics Systems GmbH - * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/armv7m.h> -#include <asm/arch/stm32.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define STM32_TIM2_BASE (STM32_APB1PERIPH_BASE + 0x0000) - -#define RCC_APB1ENR_TIM2EN (1 << 0) - -struct stm32_tim2_5 { - u32 cr1; - u32 cr2; - u32 smcr; - u32 dier; - u32 sr; - u32 egr; - u32 ccmr1; - u32 ccmr2; - u32 ccer; - u32 cnt; - u32 psc; - u32 arr; - u32 reserved1; - u32 ccr1; - u32 ccr2; - u32 ccr3; - u32 ccr4; - u32 reserved2; - u32 dcr; - u32 dmar; - u32 or; -}; - -#define TIM_CR1_CEN (1 << 0) - -#define TIM_EGR_UG (1 << 0) - -int timer_init(void) -{ - struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; - - setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN); - - if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1)) - writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1, - &tim->psc); - else - writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1, - &tim->psc); - - writel(0xFFFFFFFF, &tim->arr); - writel(TIM_CR1_CEN, &tim->cr1); - setbits_le32(&tim->egr, TIM_EGR_UG); - - gd->arch.tbl = 0; - gd->arch.tbu = 0; - gd->arch.lastinc = 0; - - return 0; -} - -ulong get_timer(ulong base) -{ - return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base; -} - -unsigned long long get_ticks(void) -{ - struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; - u32 now; - - now = readl(&tim->cnt); - - if (now >= gd->arch.lastinc) - gd->arch.tbl += (now - gd->arch.lastinc); - else - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; - - gd->arch.lastinc = now; - - return gd->arch.tbl; -} - -void reset_timer(void) -{ - struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; - - gd->arch.lastinc = readl(&tim->cnt); - gd->arch.tbl = 0; -} - -/* delay x useconds */ -void __udelay(ulong usec) -{ - unsigned long long start; - - start = get_ticks(); /* get current timestamp */ - while ((get_ticks() - start) < usec) - ; /* loop till time has passed */ -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return CONFIG_SYS_HZ_CLOCK; -} diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 94412bac0c..2cd7bae078 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,8 @@ if ARCH_SUNXI +config SPL_LDSCRIPT + default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64 + config IDENT_STRING default " Allwinner Technology" @@ -59,7 +62,6 @@ config MACH_SUNXI_H3_H5 select SUNXI_DRAM_DW_32BIT select SUNXI_GEN_SUN6I select SUPPORT_SPL - imply ENV_IS_IN_MMC choice prompt "Sunxi SoC Variant" @@ -71,7 +73,6 @@ config MACH_SUN4I select ARM_CORTEX_CPU_IS_UP select SUNXI_GEN_SUN4I select SUPPORT_SPL - imply ENV_IS_IN_MMC config MACH_SUN5I bool "sun5i (Allwinner A13)" @@ -89,7 +90,6 @@ config MACH_SUN6I select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT - imply ENV_IS_IN_MMC config MACH_SUN7I bool "sun7i (Allwinner A20)" @@ -100,7 +100,6 @@ config MACH_SUN7I select SUNXI_GEN_SUN4I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT - imply ENV_IS_IN_MMC config MACH_SUN8I_A23 bool "sun8i (Allwinner A23)" @@ -111,7 +110,6 @@ config MACH_SUN8I_A23 select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT - imply ENV_IS_IN_MMC config MACH_SUN8I_A33 bool "sun8i (Allwinner A33)" @@ -137,7 +135,6 @@ config MACH_SUN8I_H3 select ARCH_SUPPORT_PSCI select MACH_SUNXI_H3_H5 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT - imply ENV_IS_IN_MMC config MACH_SUN8I_R40 bool "sun8i (Allwinner R40)" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 58085dc0a3..51e50907d2 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -60,7 +60,6 @@ config TEGRA_ARMV8_COMMON bool "Tegra 64-bit common options" select ARM64 select TEGRA_COMMON - imply ENV_IS_IN_MMC choice prompt "Tegra SoC select" @@ -78,7 +77,6 @@ config TEGRA30 select ARM_ERRATA_743622 select ARM_ERRATA_751472 select TEGRA_ARMV7_COMMON - imply ENV_IS_IN_MMC config TEGRA114 bool "Tegra114 family" @@ -87,7 +85,6 @@ config TEGRA114 config TEGRA124 bool "Tegra124 family" select TEGRA_ARMV7_COMMON - imply ENV_IS_IN_MMC imply REGMAP imply SYSCON diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index bd137969f0..0426b7a95a 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -214,9 +214,9 @@ int board_late_init(void) #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) if (tegra_cpu_is_non_secure()) { printf("CPU is in NS mode\n"); - setenv("cpu_ns_mode", "1"); + env_set("cpu_ns_mode", "1"); } else { - setenv("cpu_ns_mode", ""); + env_set("cpu_ns_mode", ""); } #endif start_cpu_fan(); diff --git a/arch/arm/mach-tegra/tegra186/nvtboot_board.c b/arch/arm/mach-tegra/tegra186/nvtboot_board.c index feb935f0d9..b94eb424aa 100644 --- a/arch/arm/mach-tegra/tegra186/nvtboot_board.c +++ b/arch/arm/mach-tegra/tegra186/nvtboot_board.c @@ -15,7 +15,7 @@ static int set_fdt_addr(void) { int ret; - ret = setenv_hex("fdt_addr", nvtboot_boot_x0); + ret = env_set_hex("fdt_addr", nvtboot_boot_x0); if (ret) { printf("Failed to set fdt_addr to point at DTB: %d\n", ret); return ret; @@ -35,7 +35,7 @@ static int set_ethaddr_from_nvtboot(void) const u32 *prop; /* Already a valid address in the environment? If so, keep it */ - if (getenv("ethaddr")) + if (env_get("ethaddr")) return 0; node = fdt_path_offset(nvtboot_blob, "/chosen"); @@ -49,7 +49,7 @@ static int set_ethaddr_from_nvtboot(void) return -ENOENT; } - ret = setenv("ethaddr", (void *)prop); + ret = env_set("ethaddr", (void *)prop); if (ret) { printf("Failed to set ethaddr from nvtboot DTB: %d\n", ret); return ret; diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 1aed55a539..3147db76cb 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -9,6 +9,7 @@ config ARCH_UNIPHIER_32BIT select CPU_V7_HAS_NONSEC select ARMV7_NONSEC select ARCH_SUPPORT_PSCI + imply NAND choice prompt "UniPhier SoC select" diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c index 4bfa10b374..b9a2cbe148 100644 --- a/arch/arm/mach-uniphier/board_late_init.c +++ b/arch/arm/mach-uniphier/board_late_init.c @@ -37,7 +37,7 @@ static int uniphier_set_fdt_file(void) char dtb_name[256]; int buf_len = sizeof(dtb_name); - if (getenv("fdt_file")) + if (env_get("fdt_file")) return 0; /* do nothing if it is already set */ compat = fdt_stringlist_get(gd->fdt_blob, 0, "compatible", 0, NULL); @@ -55,7 +55,7 @@ static int uniphier_set_fdt_file(void) strncat(dtb_name, ".dtb", buf_len); - return setenv("fdt_file", dtb_name); + return env_set("fdt_file", dtb_name); } int board_late_init(void) @@ -65,20 +65,20 @@ int board_late_init(void) switch (uniphier_boot_device_raw()) { case BOOT_DEVICE_MMC1: printf("eMMC Boot"); - setenv("bootmode", "emmcboot"); + env_set("bootmode", "emmcboot"); break; case BOOT_DEVICE_NAND: printf("NAND Boot"); - setenv("bootmode", "nandboot"); + env_set("bootmode", "nandboot"); nand_denali_wp_disable(); break; case BOOT_DEVICE_NOR: printf("NOR Boot"); - setenv("bootmode", "norboot"); + env_set("bootmode", "norboot"); break; case BOOT_DEVICE_USB: printf("USB Boot"); - setenv("bootmode", "usbboot"); + env_set("bootmode", "usbboot"); break; default: printf("Unknown"); diff --git a/arch/arm/mach-uniphier/mmc-first-dev.c b/arch/arm/mach-uniphier/mmc-first-dev.c index 8c45229a89..acc859a6c3 100644 --- a/arch/arm/mach-uniphier/mmc-first-dev.c +++ b/arch/arm/mach-uniphier/mmc-first-dev.c @@ -35,7 +35,7 @@ static int do_mmcsetn(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (dev < 0) return CMD_RET_FAILURE; - setenv_ulong("mmc_first_dev", dev); + env_set_ulong("mmc_first_dev", dev); return CMD_RET_SUCCESS; } diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index c428ce5cc7..b9cd45ba09 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,5 +1,8 @@ if ARCH_ZYNQ +config SPL_LDSCRIPT + default "arch/arm/mach-zynq/u-boot-spl.lds" + config SPL_FAT_SUPPORT default y diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 88e7d6a7b6..26509b73c6 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -10,7 +10,6 @@ config MCF520x config MCF52x2 bool - imply ENV_IS_IN_FLASH config MCF523x bool @@ -23,7 +22,6 @@ config MCF5301x config MCF532x bool - imply ENV_IS_IN_FLASH config MCF537x bool @@ -39,7 +37,6 @@ config MCF5227x config MCF547x_8x bool - imply ENV_IS_IN_FLASH # processor type config M5208 @@ -73,7 +70,6 @@ config M5275 config M5282 bool select MCF52x2 - imply ENV_IS_IN_FLASH config M5307 bool @@ -111,12 +107,10 @@ config M52277 config M547x bool select MCF547x_8x - imply ENV_IS_IN_FLASH config M548x bool select MCF547x_8x - imply ENV_IS_IN_FLASH choice prompt "Target select" @@ -197,12 +191,10 @@ config TARGET_M54455EVB config TARGET_M5475EVB bool "Support M5475EVB" select M547x - imply ENV_IS_IN_FLASH config TARGET_M5485EVB bool "Support M5485EVB" select M548x - imply ENV_IS_IN_FLASH config TARGET_AMCORE bool "Support AMCORE" diff --git a/arch/m68k/lib/bootm.c b/arch/m68k/lib/bootm.c index fa9c493081..c976904fa9 100644 --- a/arch/m68k/lib/bootm.c +++ b/arch/m68k/lib/bootm.c @@ -113,7 +113,8 @@ static void set_clocks_in_mhz (bd_t *kbd) { char *s; - if ((s = getenv("clocks_in_mhz")) != NULL) { + s = env_get("clocks_in_mhz"); + if (s) { /* convert all clock information to MHz */ kbd->bi_intfreq /= 1000000L; kbd->bi_busfreq /= 1000000L; diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 20fa25b5cc..f791c0081e 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -21,4 +21,7 @@ endchoice source "board/xilinx/microblaze-generic/Kconfig" +config SPL_LDSCRIPT + default "arch/microblaze/cpu/u-boot-spl.lds" + endmenu diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 2732203b93..0a286e82c2 100644 --- a/arch/microblaze/lib/bootm.c +++ b/arch/microblaze/lib/bootm.c @@ -27,7 +27,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], { /* First parameter is mapped to $r5 for kernel boot args */ void (*thekernel) (char *, ulong, ulong); - char *commandline = getenv("bootargs"); + char *commandline = env_get("bootargs"); ulong rd_data_start, rd_data_end; /* diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b53206bf8e..d07b92d1b4 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -21,7 +21,6 @@ config TARGET_QEMU_MIPS select SUPPORTS_CPU_MIPS64_R1 select SUPPORTS_CPU_MIPS64_R2 select ROM_EXCEPTION_VECTORS - imply ENV_IS_IN_FLASH config TARGET_MALTA bool "Support malta" @@ -43,7 +42,6 @@ config TARGET_MALTA select SWAP_IO_SPACE select MIPS_L1_CACHE_SHIFT_6 select ROM_EXCEPTION_VECTORS - imply ENV_IS_IN_FLASH config TARGET_VCT bool "Support vct" @@ -85,7 +83,6 @@ config ARCH_BMIPS select CPU select RAM select SYSRESET - imply ENV_IS_NOWHERE config MACH_PIC32 bool "Support Microchip PIC32" @@ -110,7 +107,6 @@ config TARGET_BOSTON select SUPPORTS_CPU_MIPS64_R2 select SUPPORTS_CPU_MIPS64_R6 select ROM_EXCEPTION_VECTORS - imply ENV_IS_IN_FLASH config TARGET_XILFPGA bool "Support Imagination Xilfpga" @@ -200,7 +196,6 @@ config CPU_MIPS64_R2 bool "MIPS64 Release 2" depends on SUPPORTS_CPU_MIPS64_R2 select 64BIT - imply ENV_IS_IN_FLASH help Choose this option to build a kernel for release 2 through 5 of the MIPS64 architecture. diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 2b6790524c..5a9a2811ff 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -80,7 +80,7 @@ static void linux_cmdline_legacy(bootm_headers_t *images) linux_cmdline_init(); - bootargs = getenv("bootargs"); + bootargs = env_get("bootargs"); if (!bootargs) return; @@ -202,11 +202,11 @@ static void linux_env_legacy(bootm_headers_t *images) sprintf(env_buf, "0x%X", (uint) (gd->bd->bi_flashsize)); linux_env_set("flash_size", env_buf); - cp = getenv("ethaddr"); + cp = env_get("ethaddr"); if (cp) linux_env_set("ethaddr", cp); - cp = getenv("eth1addr"); + cp = env_get("eth1addr"); if (cp) linux_env_set("eth1addr", cp); diff --git a/arch/nds32/lib/bootm.c b/arch/nds32/lib/bootm.c index 21aadf284f..e834329e0b 100644 --- a/arch/nds32/lib/bootm.c +++ b/arch/nds32/lib/bootm.c @@ -50,7 +50,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) void (*theKernel)(int zero, int arch, uint params); #ifdef CONFIG_CMDLINE_TAG - char *commandline = getenv("bootargs"); + char *commandline = env_get("bootargs"); #endif /* @@ -64,7 +64,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) theKernel = (void (*)(int, int, uint))images->ep; - s = getenv("machid"); + s = env_get("machid"); if (s) { machid = simple_strtoul(s, NULL, 16); printf("Using machid 0x%x from environment\n", machid); diff --git a/arch/nios2/lib/bootm.c b/arch/nios2/lib/bootm.c index 4e5c269193..00ade2c573 100644 --- a/arch/nios2/lib/bootm.c +++ b/arch/nios2/lib/bootm.c @@ -12,7 +12,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { void (*kernel)(int, int, int, char *) = (void *)images->ep; - char *commandline = getenv("bootargs"); + char *commandline = env_get("bootargs"); ulong initrd_start = images->rd_start; ulong initrd_end = images->rd_end; char *of_flat_tree = NULL; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 8094416e4a..e4b3043fa2 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -28,10 +28,11 @@ config MPC86xx bool "MPC86xx" select SYS_FSL_DDR select SYS_FSL_DDR_BE - imply ENV_IS_IN_FLASH + imply CMD_REGINFO config 8xx bool "MPC8xx" + imply CMD_REGINFO endchoice diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index b5b26f9b3a..a3779734c1 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -13,7 +13,6 @@ config TARGET_MPC8308_P1M config TARGET_SBC8349 bool "Support sbc8349" - imply ENV_IS_IN_FLASH config TARGET_VE8313 bool "Support ve8313" @@ -40,7 +39,6 @@ config TARGET_MPC8323ERDB config TARGET_MPC832XEMDS bool "Support MPC832XEMDS" select BOARD_EARLY_INIT_F - imply ENV_IS_IN_FLASH config TARGET_MPC8349EMDS bool "Support MPC8349EMDS" @@ -52,7 +50,6 @@ config TARGET_MPC8349EMDS config TARGET_MPC8349ITX bool "Support MPC8349ITX" imply CMD_IRQ - imply ENV_IS_IN_FLASH config TARGET_MPC837XEMDS bool "Support MPC837XEMDS" @@ -77,13 +74,11 @@ config TARGET_SUVD3 bool "Support suvd3" imply CMD_CRAMFS imply FS_CRAMFS - imply ENV_IS_IN_FLASH config TARGET_TUXX1 bool "Support tuxx1" imply CMD_CRAMFS imply FS_CRAMFS - imply ENV_IS_IN_FLASH config TARGET_TQM834X bool "Support TQM834x" @@ -95,7 +90,7 @@ config TARGET_HRCON config TARGET_STRIDER bool "Support strider" select SYS_FSL_ERRATUM_ESDHC111 - imply ENV_IS_IN_FLASH + imply CMD_PCA953X endchoice diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 93a454cf1f..92187d371b 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -19,7 +19,6 @@ choice config TARGET_SBC8548 bool "Support sbc8548" select ARCH_MPC8548 - imply ENV_IS_IN_FLASH config TARGET_SOCRATES bool "Support socrates" @@ -105,7 +104,6 @@ config TARGET_MPC8544DS config TARGET_MPC8548CDS bool "Support MPC8548CDS" select ARCH_MPC8548 - imply ENV_IS_IN_FLASH config TARGET_MPC8555CDS bool "Support MPC8555CDS" @@ -427,6 +425,7 @@ config ARCH_B4420 select FSL_IFC imply CMD_EEPROM imply CMD_NAND + imply CMD_REGINFO config ARCH_B4860 bool @@ -454,6 +453,7 @@ config ARCH_B4860 select FSL_IFC imply CMD_EEPROM imply CMD_NAND + imply CMD_REGINFO config ARCH_BSC9131 bool @@ -469,6 +469,7 @@ config ARCH_BSC9131 select FSL_IFC imply CMD_EEPROM imply CMD_NAND + imply CMD_REGINFO config ARCH_BSC9132 bool @@ -489,6 +490,8 @@ config ARCH_BSC9132 imply CMD_EEPROM imply CMD_MTDPARTS imply CMD_NAND + imply CMD_PCI + imply CMD_REGINFO config ARCH_C29X bool @@ -503,6 +506,8 @@ config ARCH_C29X select SYS_PPC_E500_USE_DEBUG_TLB select FSL_IFC imply CMD_NAND + imply CMD_PCI + imply CMD_REGINFO config ARCH_MPC8536 bool @@ -518,6 +523,7 @@ config ARCH_MPC8536 select FSL_ELBC imply CMD_NAND imply CMD_SATA + imply CMD_REGINFO config ARCH_MPC8540 bool @@ -557,7 +563,7 @@ config ARCH_MPC8548 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_2 select SYS_PPC_E500_USE_DEBUG_TLB - imply ENV_IS_IN_FLASH + imply CMD_REGINFO config ARCH_MPC8555 bool @@ -607,7 +613,6 @@ config ARCH_MPC8572 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_ELBC imply CMD_NAND - imply ENV_IS_IN_FLASH config ARCH_P1010 bool @@ -633,6 +638,8 @@ config ARCH_P1010 imply CMD_MTDPARTS imply CMD_NAND imply CMD_SATA + imply CMD_PCI + imply CMD_REGINFO config ARCH_P1011 bool @@ -663,6 +670,8 @@ config ARCH_P1020 select FSL_ELBC imply CMD_NAND imply CMD_SATA + imply CMD_PCI + imply CMD_REGINFO config ARCH_P1021 bool @@ -677,8 +686,10 @@ config ARCH_P1021 select SYS_FSL_SEC_COMPAT_2 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_ELBC + imply CMD_REGINFO imply CMD_NAND imply CMD_SATA + imply CMD_REGINFO config ARCH_P1022 bool @@ -724,6 +735,8 @@ config ARCH_P1024 imply CMD_EEPROM imply CMD_NAND imply CMD_SATA + imply CMD_PCI + imply CMD_REGINFO config ARCH_P1025 bool @@ -739,6 +752,7 @@ config ARCH_P1025 select SYS_PPC_E500_USE_DEBUG_TLB select FSL_ELBC imply CMD_SATA + imply CMD_REGINFO config ARCH_P2020 bool @@ -756,6 +770,7 @@ config ARCH_P2020 select FSL_ELBC imply CMD_EEPROM imply CMD_NAND + imply CMD_REGINFO config ARCH_P2041 bool @@ -805,6 +820,7 @@ config ARCH_P3041 select FSL_ELBC imply CMD_NAND imply CMD_SATA + imply CMD_REGINFO config ARCH_P4080 bool @@ -841,6 +857,7 @@ config ARCH_P4080 select SYS_FSL_SEC_COMPAT_4 select FSL_ELBC imply CMD_SATA + imply CMD_REGINFO config ARCH_P5020 bool @@ -863,6 +880,7 @@ config ARCH_P5020 select SYS_PPC64 select FSL_ELBC imply CMD_SATA + imply CMD_REGINFO config ARCH_P5040 bool @@ -885,6 +903,7 @@ config ARCH_P5040 select SYS_PPC64 select FSL_ELBC imply CMD_SATA + imply CMD_REGINFO config ARCH_QEMU_E500 bool @@ -907,6 +926,7 @@ config ARCH_T1023 select FSL_IFC imply CMD_EEPROM imply CMD_NAND + imply CMD_REGINFO config ARCH_T1024 bool @@ -927,6 +947,7 @@ config ARCH_T1024 imply CMD_EEPROM imply CMD_NAND imply CMD_MTDPARTS + imply CMD_REGINFO config ARCH_T1040 bool @@ -948,6 +969,7 @@ config ARCH_T1040 imply CMD_MTDPARTS imply CMD_NAND imply CMD_SATA + imply CMD_REGINFO config ARCH_T1042 bool @@ -969,6 +991,7 @@ config ARCH_T1042 imply CMD_MTDPARTS imply CMD_NAND imply CMD_SATA + imply CMD_REGINFO config ARCH_T2080 bool @@ -993,6 +1016,7 @@ config ARCH_T2080 select FSL_IFC imply CMD_SATA imply CMD_NAND + imply CMD_REGINFO config ARCH_T2081 bool @@ -1014,6 +1038,7 @@ config ARCH_T2081 select SYS_PPC64 select FSL_IFC imply CMD_NAND + imply CMD_REGINFO config ARCH_T4160 bool @@ -1037,6 +1062,7 @@ config ARCH_T4160 select FSL_IFC imply CMD_SATA imply CMD_NAND + imply CMD_REGINFO config ARCH_T4240 bool @@ -1063,6 +1089,7 @@ config ARCH_T4240 select FSL_IFC imply CMD_SATA imply CMD_NAND + imply CMD_REGINFO config BOOKE bool @@ -1076,6 +1103,7 @@ config E500 config E500MC bool + imply CMD_PCI help Enble PowerPC E500MC core diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index a3076d8d71..ea46e49853 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -256,7 +256,7 @@ static void enable_tdm_law(void) * is not setup properly yet. Search for tdm entry in * hwconfig. */ - ret = getenv_f("hwconfig", buffer, sizeof(buffer)); + ret = env_get_f("hwconfig", buffer, sizeof(buffer)); if (ret > 0) { tdm_hwconfig_enabled = hwconfig_f("tdm", buffer); /* If tdm is defined in hwconfig, set law for tdm workaround */ @@ -280,7 +280,7 @@ void enable_cpc(void) cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; /* Extract hwconfig from environment */ - ret = getenv_f("hwconfig", buffer, sizeof(buffer)); + ret = env_get_f("hwconfig", buffer, sizeof(buffer)); if (ret > 0) { /* * If "en_cpc" is not defined in hwconfig then by default all @@ -754,7 +754,7 @@ int cpu_init_r(void) char *buf = NULL; int n, res; - n = getenv_f("hwconfig", buffer, sizeof(buffer)); + n = env_get_f("hwconfig", buffer, sizeof(buffer)); if (n > 0) buf = buffer; @@ -794,7 +794,7 @@ int cpu_init_r(void) #endif #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) - spin = getenv("spin_table_compat"); + spin = env_get("spin_table_compat"); if (spin && (*spin == 'n')) spin_table_compat = 0; else @@ -845,7 +845,7 @@ int cpu_init_r(void) #ifdef CONFIG_SYS_SRIO srio_init(); #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER - char *s = getenv("bootmaster"); + char *s = env_get("bootmaster"); if (s) { if (!strcmp(s, "SRIO1")) { srio_boot_master(1); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index caa0bf9bdc..297dc4af48 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -92,7 +92,7 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) * Extract hwconfig from environment. * Search for tdm entry in hwconfig. */ - ret = getenv_f("hwconfig", buffer, sizeof(buffer)); + ret = env_get_f("hwconfig", buffer, sizeof(buffer)); if (ret > 0) tdm_hwconfig_enabled = hwconfig_f("tdm", buffer); @@ -580,7 +580,7 @@ static void fdt_fixup_l2_switch(void *blob) return; /* Get MAC address for the l2switch from "l2switchaddr"*/ - if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) { + if (!eth_env_get_enetaddr("l2switchaddr", l2swaddr)) { printf("Warning: MAC address for l2switch not found\n"); memset(l2swaddr, 0, sizeof(l2swaddr)); } diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 1bc0c64cfc..79d6544a09 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -514,7 +514,7 @@ void fsl_serdes_init(void) * Extract hwconfig from environment since we have not properly setup * the environment but need it for ddr config params */ - if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) + if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; #endif if (serdes_prtcl_map & (1 << NONE)) diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index 0addf8493c..2ea9f5c7be 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -31,7 +31,7 @@ u32 get_my_id() int hold_cores_in_reset(int verbose) { /* Default to no, overridden by 'y', 'yes', 'Y', 'Yes', or '1' */ - if (getenv_yesno("mp_holdoff") == 1) { + if (env_get_yesno("mp_holdoff") == 1) { if (verbose) { puts("Secondary cores are being held in reset.\n"); puts("See 'mp_holdoff' environment variable\n"); diff --git a/arch/powerpc/cpu/mpc86xx/Kconfig b/arch/powerpc/cpu/mpc86xx/Kconfig index fe56efdf55..2cc180da38 100644 --- a/arch/powerpc/cpu/mpc86xx/Kconfig +++ b/arch/powerpc/cpu/mpc86xx/Kconfig @@ -40,7 +40,6 @@ config ARCH_MPC8641 select FSL_LAW select SYS_FSL_HAS_DDR1 select SYS_FSL_HAS_DDR2 - imply ENV_IS_IN_FLASH config FSL_LAW bool diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 0e204027af..b9ae24dc98 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -86,7 +86,7 @@ static void boot_jump_linux(bootm_headers_t *images) debug (" Booting using OF flat tree...\n"); WATCHDOG_RESET (); (*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC, - getenv_bootm_mapsize(), 0, 0); + env_get_bootm_mapsize(), 0, 0); /* does not return */ } else #endif @@ -121,8 +121,8 @@ void arch_lmb_reserve(struct lmb *lmb) phys_size_t bootm_size; ulong size, sp, bootmap_base; - bootmap_base = getenv_bootm_low(); - bootm_size = getenv_bootm_size(); + bootmap_base = env_get_bootm_low(); + bootm_size = env_get_bootm_size(); #ifdef DEBUG if (((u64)bootmap_base + bootm_size) > @@ -275,7 +275,8 @@ static void set_clocks_in_mhz (bd_t *kbd) { char *s; - if ((s = getenv ("clocks_in_mhz")) != NULL) { + s = env_get("clocks_in_mhz"); + if (s) { /* convert all clock information to MHz */ kbd->bi_intfreq /= 1000000L; kbd->bi_busfreq /= 1000000L; @@ -339,6 +340,6 @@ void boot_jump_vxworks(bootm_headers_t *images) ((void (*)(void *, ulong, ulong, ulong, ulong, ulong, ulong))images->ep)(images->ft_addr, - 0, 0, EPAPR_MAGIC, getenv_bootm_mapsize(), 0, 0); + 0, 0, EPAPR_MAGIC, env_get_bootm_mapsize(), 0, 0); } #endif diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1d40fe6845..d20761e66c 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -3,16 +3,13 @@ menu "SuperH architecture" config CPU_SH2 bool - imply ENV_IS_IN_FLASH config CPU_SH2A bool select CPU_SH2 - imply ENV_IS_IN_FLASH config CPU_SH3 bool - imply ENV_IS_IN_FLASH config CPU_SH4 bool @@ -128,6 +125,8 @@ config SYS_CPU default "sh3" if CPU_SH3 default "sh4" if CPU_SH4 +source "arch/sh/lib/Kconfig" + source "board/alphaproject/ap_sh4a_4a/Kconfig" source "board/espt/Kconfig" source "board/mpr2/Kconfig" diff --git a/arch/sh/cpu/u-boot.lds b/arch/sh/cpu/u-boot.lds index bbf9ff485f..7fc91bc4aa 100644 --- a/arch/sh/cpu/u-boot.lds +++ b/arch/sh/cpu/u-boot.lds @@ -33,9 +33,9 @@ SECTIONS KEEP(CONFIG_BOARDDIR/lowlevel_init.o (.text .spiboot1.text)) KEEP(*(.spiboot2.text)) . = ALIGN(8192); - common/env_embedded.o (.ppcenv) + env/embedded.o (.ppcenv) . = ALIGN(8192); - common/env_embedded.o (.ppcenvr) + env/embedded.o (.ppcenvr) . = ALIGN(8192); *(.text) . = ALIGN(4); diff --git a/arch/sh/lib/Kconfig b/arch/sh/lib/Kconfig new file mode 100644 index 0000000000..cec8d09cc3 --- /dev/null +++ b/arch/sh/lib/Kconfig @@ -0,0 +1,6 @@ +config CMD_SH_ZIMAGEBOOT + bool "zimageboot - Boot a zImage on SH" + default y + help + This is special SH-specific command to boot a zImage (compressed + Linux image) on SH-architecture boards. diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index 8a0010be23..09fbd5e5df 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -61,7 +61,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima char *cmdline = (char *)param + COMMAND_LINE; /* PAGE_SIZE */ unsigned long size = images->ep - (unsigned long)param; - char *bootargs = getenv("bootargs"); + char *bootargs = env_get("bootargs"); /* * allow the PREP bootm subcommand, it is required for bootm to work diff --git a/arch/sh/lib/zimageboot.c b/arch/sh/lib/zimageboot.c index 3fea5f5b53..cd4abba10a 100644 --- a/arch/sh/lib/zimageboot.c +++ b/arch/sh/lib/zimageboot.c @@ -42,7 +42,7 @@ int do_sh_zimageboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* Linux kernel command line */ cmdline = (char *)param + COMMAND_LINE; - bootargs = getenv("bootargs"); + bootargs = env_get("bootargs"); /* Clear zero page */ /* cppcheck-suppress nullPointer */ diff --git a/arch/x86/cpu/baytrail/Kconfig b/arch/x86/cpu/baytrail/Kconfig index 9374c121f9..75dbbc27f1 100644 --- a/arch/x86/cpu/baytrail/Kconfig +++ b/arch/x86/cpu/baytrail/Kconfig @@ -10,7 +10,6 @@ config INTEL_BAYTRAIL select ARCH_MISC_INIT if !EFI imply HAVE_INTEL_ME if !EFI imply ENABLE_MRC_CACHE - imply ENV_IS_IN_SPI_FLASH imply AHCI_PCI imply ICH_SPI imply INTEL_ICH6_GPIO diff --git a/arch/x86/cpu/broadwell/Kconfig b/arch/x86/cpu/broadwell/Kconfig index b421f18202..bc2dba2bd7 100644 --- a/arch/x86/cpu/broadwell/Kconfig +++ b/arch/x86/cpu/broadwell/Kconfig @@ -9,7 +9,6 @@ config INTEL_BROADWELL select ARCH_EARLY_INIT_R imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE - imply ENV_IS_IN_SPI_FLASH imply AHCI_PCI imply ICH_SPI imply INTEL_BROADWELL_GPIO diff --git a/arch/x86/cpu/coreboot/Kconfig b/arch/x86/cpu/coreboot/Kconfig index d4e0587fc5..60eb45f9d0 100644 --- a/arch/x86/cpu/coreboot/Kconfig +++ b/arch/x86/cpu/coreboot/Kconfig @@ -3,7 +3,6 @@ if TARGET_COREBOOT config SYS_COREBOOT bool default y - imply ENV_IS_NOWHERE imply AHCI_PCI imply E1000 imply ICH_SPI diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig index 00f99d6b11..c214ea0efe 100644 --- a/arch/x86/cpu/ivybridge/Kconfig +++ b/arch/x86/cpu/ivybridge/Kconfig @@ -10,7 +10,6 @@ config NORTHBRIDGE_INTEL_IVYBRIDGE select CACHE_MRC_BIN if HAVE_MRC imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE - imply ENV_IS_IN_SPI_FLASH imply AHCI_PCI imply ICH_SPI imply INTEL_ICH6_GPIO diff --git a/arch/x86/cpu/qemu/Kconfig b/arch/x86/cpu/qemu/Kconfig index fdf5ae338e..da378128fe 100644 --- a/arch/x86/cpu/qemu/Kconfig +++ b/arch/x86/cpu/qemu/Kconfig @@ -7,7 +7,6 @@ config QEMU bool select ARCH_EARLY_INIT_R - imply ENV_IS_NOWHERE imply AHCI_PCI imply E1000 imply SYS_NS16550 diff --git a/arch/x86/cpu/quark/Kconfig b/arch/x86/cpu/quark/Kconfig index 7ec46e95ef..0ed724813d 100644 --- a/arch/x86/cpu/quark/Kconfig +++ b/arch/x86/cpu/quark/Kconfig @@ -10,7 +10,6 @@ config INTEL_QUARK select ARCH_EARLY_INIT_R select ARCH_MISC_INIT imply ENABLE_MRC_CACHE - imply ENV_IS_IN_SPI_FLASH imply ETH_DESIGNWARE imply ICH_SPI imply INTEL_ICH6_GPIO diff --git a/arch/x86/cpu/queensbay/Kconfig b/arch/x86/cpu/queensbay/Kconfig index d1b04c952a..835de85268 100644 --- a/arch/x86/cpu/queensbay/Kconfig +++ b/arch/x86/cpu/queensbay/Kconfig @@ -9,7 +9,6 @@ config INTEL_QUEENSBAY select HAVE_FSP select HAVE_CMC select ARCH_EARLY_INIT_R - imply ENV_IS_IN_SPI_FLASH imply AHCI_PCI imply ICH_SPI imply INTEL_ICH6_GPIO diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index aafbeb01f9..00172dc7c1 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -48,15 +48,15 @@ static void build_command_line(char *command_line, int auto_boot) command_line[0] = '\0'; - env_command_line = getenv("bootargs"); + env_command_line = env_get("bootargs"); /* set console= argument if we use a serial console */ if (!strstr(env_command_line, "console=")) { - if (!strcmp(getenv("stdout"), "serial")) { + if (!strcmp(env_get("stdout"), "serial")) { /* We seem to use serial console */ sprintf(command_line, "console=ttyS0,%s ", - getenv("baudrate")); + env_get("baudrate")); } } @@ -285,7 +285,7 @@ int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) /* argv[1] holds the address of the bzImage */ s = argv[1]; } else { - s = getenv("fileaddr"); + s = env_get("fileaddr"); } if (s) diff --git a/arch/xtensa/lib/bootm.c b/arch/xtensa/lib/bootm.c index 1604bb9536..16961acba5 100644 --- a/arch/xtensa/lib/bootm.c +++ b/arch/xtensa/lib/bootm.c @@ -136,7 +136,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) { struct bp_tag *params, *params_start; ulong initrd_start, initrd_end; - char *commandline = getenv("bootargs"); + char *commandline = env_get("bootargs"); if (!(flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO))) return 0; diff --git a/board/Arcturus/ucp1020/cmd_arc.c b/board/Arcturus/ucp1020/cmd_arc.c index fa6b4853f9..0d3ac88fff 100644 --- a/board/Arcturus/ucp1020/cmd_arc.c +++ b/board/Arcturus/ucp1020/cmd_arc.c @@ -138,7 +138,7 @@ int get_arc_info(void) printf("\t<not found>\n"); } else { printf("\t%s\n", smac[3]); - setenv("SERIAL", smac[3]); + env_set("SERIAL", smac[3]); } } @@ -149,10 +149,10 @@ int get_arc_info(void) if (smac[2][0] == 0xFF) { printf("\t<not found>\n"); } else { - char *ret = getenv("ethaddr"); + char *ret = env_get("ethaddr"); if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) { - setenv("ethaddr", smac[2]); + env_set("ethaddr", smac[2]); printf("\t%s (factory)\n", smac[2]); } else { printf("\t%s\n", ret); @@ -160,8 +160,8 @@ int get_arc_info(void) } if (strcmp(smac[1], "00:00:00:00:00:00") == 0) { - setenv("eth1addr", smac[2]); - setenv("eth2addr", smac[2]); + env_set("eth1addr", smac[2]); + env_set("eth2addr", smac[2]); return 0; } @@ -169,10 +169,10 @@ int get_arc_info(void) if (smac[1][0] == 0xFF) { printf("\t<not found>\n"); } else { - char *ret = getenv("eth1addr"); + char *ret = env_get("eth1addr"); if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) { - setenv("eth1addr", smac[1]); + env_set("eth1addr", smac[1]); printf("\t%s (factory)\n", smac[1]); } else { printf("\t%s\n", ret); @@ -180,7 +180,7 @@ int get_arc_info(void) } if (strcmp(smac[0], "00:00:00:00:00:00") == 0) { - setenv("eth2addr", smac[1]); + env_set("eth2addr", smac[1]); return 0; } @@ -188,10 +188,10 @@ int get_arc_info(void) if (smac[0][0] == 0xFF) { printf("\t<not found>\n"); } else { - char *ret = getenv("eth2addr"); + char *ret = env_get("eth2addr"); if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) { - setenv("eth2addr", smac[0]); + env_set("eth2addr", smac[0]); printf("\t%s (factory)\n", smac[0]); } else { printf("\t%s\n", ret); diff --git a/board/Arcturus/ucp1020/spl.c b/board/Arcturus/ucp1020/spl.c index cd484fc44b..b5e7a5db06 100644 --- a/board/Arcturus/ucp1020/spl.c +++ b/board/Arcturus/ucp1020/spl.c @@ -10,6 +10,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <ns16550.h> #include <malloc.h> #include <mmc.h> @@ -99,7 +100,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; #else env_relocate(); #endif diff --git a/board/Arcturus/ucp1020/ucp1020.c b/board/Arcturus/ucp1020/ucp1020.c index 0d086e87fa..3f786a2014 100644 --- a/board/Arcturus/ucp1020/ucp1020.c +++ b/board/Arcturus/ucp1020/ucp1020.c @@ -64,7 +64,7 @@ void board_gpio_init(void) for (i = 0; i < GPIO_MAX_NUM; i++) { sprintf(envname, "GPIO%d", i); - val = getenv(envname); + val = env_get(envname); if (val) { char direction = toupper(val[0]); char level = toupper(val[1]); @@ -82,7 +82,7 @@ void board_gpio_init(void) } } - val = getenv("PCIE_OFF"); + val = env_get("PCIE_OFF"); if (val) { gpio_direction_input(GPIO_PCIE1_EN); gpio_direction_input(GPIO_PCIE2_EN); @@ -91,7 +91,7 @@ void board_gpio_init(void) gpio_direction_output(GPIO_PCIE2_EN, 1); } - val = getenv("SDHC_CDWP_OFF"); + val = env_get("SDHC_CDWP_OFF"); if (!val) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -214,7 +214,7 @@ int last_stage_init(void) else printf("NCT72(0x%x): ready\n", id2); - kval = getenv("kernelargs"); + kval = env_get("kernelargs"); mmc = find_mmc_device(0); if (mmc) @@ -230,21 +230,21 @@ int last_stage_init(void) strcat(newkernelargs, mmckargs); strcat(newkernelargs, " "); strcat(newkernelargs, &tmp[n]); - setenv("kernelargs", newkernelargs); + env_set("kernelargs", newkernelargs); } else { - setenv("kernelargs", mmckargs); + env_set("kernelargs", mmckargs); } } get_arc_info(); if (kval) { - sval = getenv("SERIAL"); + sval = env_get("SERIAL"); if (sval) { strcpy(newkernelargs, "SN="); strcat(newkernelargs, sval); strcat(newkernelargs, " "); strcat(newkernelargs, kval); - setenv("kernelargs", newkernelargs); + env_set("kernelargs", newkernelargs); } } else { printf("Error reading kernelargs env variable!\n"); @@ -307,8 +307,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c index 3a584021ac..d203429738 100644 --- a/board/Barix/ipam390/ipam390.c +++ b/board/Barix/ipam390/ipam390.c @@ -157,7 +157,7 @@ u32 get_board_rev(void) u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK; u32 rev = 0; - s = getenv("maxcpuclk"); + s = env_get("maxcpuclk"); if (s) maxcpuclk = simple_strtoul(s, NULL, 10); diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c index a22722122b..6083479f2b 100644 --- a/board/BuR/brppt1/board.c +++ b/board/BuR/brppt1/board.c @@ -167,7 +167,7 @@ int board_late_init(void) lcd_position_cursor(1, 8); lcd_puts( "switching to network-console ... "); - setenv("bootcmd", "run netconsole"); + env_set("bootcmd", "run netconsole"); } return 0; } diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c index f4bfa410cc..ca08f3cd90 100644 --- a/board/BuR/brxre1/board.c +++ b/board/BuR/brxre1/board.c @@ -203,7 +203,7 @@ int board_late_init(void) lcd_position_cursor(1, 8); lcd_puts( "switching to network-console ... "); - setenv("bootcmd", "run netconsole"); + env_set("bootcmd", "run netconsole"); cnt = 4; break; } else if (!gpio_get_value(ESC_KEY) && @@ -211,7 +211,7 @@ int board_late_init(void) lcd_position_cursor(1, 8); lcd_puts( "starting u-boot script from USB ... "); - setenv("bootcmd", "run usbscript"); + env_set("bootcmd", "run usbscript"); cnt = 4; break; } else if ((!gpio_get_value(ESC_KEY) && @@ -221,7 +221,7 @@ int board_late_init(void) lcd_position_cursor(1, 8); lcd_puts( "starting script from network ... "); - setenv("bootcmd", "run netscript"); + env_set("bootcmd", "run netscript"); cnt = 4; break; } else if (!gpio_get_value(ESC_KEY)) { @@ -232,19 +232,19 @@ int board_late_init(void) lcd_position_cursor(1, 8); lcd_puts( "starting vxworks from network ... "); - setenv("bootcmd", "run netboot"); + env_set("bootcmd", "run netboot"); cnt = 4; } else if (scratchreg == 0xCD) { lcd_position_cursor(1, 8); lcd_puts( "starting script from network ... "); - setenv("bootcmd", "run netscript"); + env_set("bootcmd", "run netscript"); cnt = 4; } else if (scratchreg == 0xCE) { lcd_position_cursor(1, 8); lcd_puts( "starting AR from eMMC ... "); - setenv("bootcmd", "run mmcboot"); + env_set("bootcmd", "run mmcboot"); cnt = 4; } @@ -252,7 +252,7 @@ int board_late_init(void) switch (cnt) { case 0: lcd_puts("entering BOOT-mode. "); - setenv("bootcmd", "run defaultAR"); + env_set("bootcmd", "run defaultAR"); buf = 0x0000; break; case 1: @@ -282,10 +282,10 @@ int board_late_init(void) snprintf(othbootargs, sizeof(othbootargs), "u=vxWorksFTP pw=vxWorks o=0x%08x;0x%08x;0x%08x;0x%08x", (unsigned int) gd->fb_base-0x20, - (u32)getenv_ulong("vx_memtop", 16, gd->fb_base-0x20), - (u32)getenv_ulong("vx_romfsbase", 16, 0), - (u32)getenv_ulong("vx_romfssize", 16, 0)); - setenv("othbootargs", othbootargs); + (u32)env_get_ulong("vx_memtop", 16, gd->fb_base-0x20), + (u32)env_get_ulong("vx_romfsbase", 16, 0), + (u32)env_get_ulong("vx_romfssize", 16, 0)); + env_set("othbootargs", othbootargs); /* * reset VBAR registers to its reset location, VxWorks 6.9.3.2 does * expect that vectors are there, original u-boot moves them to _start diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index c3a56db76a..c1cd010023 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -58,9 +58,9 @@ void lcdbacklight(int on) unsigned int bright = FDTPROP(PATHINF, "brightdef"); unsigned int pwmfrq = FDTPROP(PATHINF, "brightfdim"); #else - unsigned int driver = getenv_ulong("ds1_bright_drv", 16, 0UL); - unsigned int bright = getenv_ulong("ds1_bright_def", 10, 50); - unsigned int pwmfrq = getenv_ulong("ds1_pwmfreq", 10, ~0UL); + unsigned int driver = env_get_ulong("ds1_bright_drv", 16, 0UL); + unsigned int bright = env_get_ulong("ds1_bright_def", 10, 50); + unsigned int pwmfrq = env_get_ulong("ds1_pwmfreq", 10, ~0UL); #endif unsigned int tmp; struct gptimer *timerhw; @@ -184,22 +184,22 @@ int load_lcdtiming(struct am335x_lcdpanel *panel) puts("no 'factory-settings / rotation' in dtb!\n"); } snprintf(buf, sizeof(buf), "fbcon=rotate:%d", panel_info.vl_rot); - setenv("optargs_rot", buf); + env_set("optargs_rot", buf); #else - pnltmp.hactive = getenv_ulong("ds1_hactive", 10, ~0UL); - pnltmp.vactive = getenv_ulong("ds1_vactive", 10, ~0UL); - pnltmp.bpp = getenv_ulong("ds1_bpp", 10, ~0UL); - pnltmp.hfp = getenv_ulong("ds1_hfp", 10, ~0UL); - pnltmp.hbp = getenv_ulong("ds1_hbp", 10, ~0UL); - pnltmp.hsw = getenv_ulong("ds1_hsw", 10, ~0UL); - pnltmp.vfp = getenv_ulong("ds1_vfp", 10, ~0UL); - pnltmp.vbp = getenv_ulong("ds1_vbp", 10, ~0UL); - pnltmp.vsw = getenv_ulong("ds1_vsw", 10, ~0UL); - pnltmp.pxl_clk_div = getenv_ulong("ds1_pxlclkdiv", 10, ~0UL); - pnltmp.pol = getenv_ulong("ds1_pol", 16, ~0UL); - pnltmp.pup_delay = getenv_ulong("ds1_pupdelay", 10, ~0UL); - pnltmp.pon_delay = getenv_ulong("ds1_tondelay", 10, ~0UL); - panel_info.vl_rot = getenv_ulong("ds1_rotation", 10, 0); + pnltmp.hactive = env_get_ulong("ds1_hactive", 10, ~0UL); + pnltmp.vactive = env_get_ulong("ds1_vactive", 10, ~0UL); + pnltmp.bpp = env_get_ulong("ds1_bpp", 10, ~0UL); + pnltmp.hfp = env_get_ulong("ds1_hfp", 10, ~0UL); + pnltmp.hbp = env_get_ulong("ds1_hbp", 10, ~0UL); + pnltmp.hsw = env_get_ulong("ds1_hsw", 10, ~0UL); + pnltmp.vfp = env_get_ulong("ds1_vfp", 10, ~0UL); + pnltmp.vbp = env_get_ulong("ds1_vbp", 10, ~0UL); + pnltmp.vsw = env_get_ulong("ds1_vsw", 10, ~0UL); + pnltmp.pxl_clk_div = env_get_ulong("ds1_pxlclkdiv", 10, ~0UL); + pnltmp.pol = env_get_ulong("ds1_pol", 16, ~0UL); + pnltmp.pup_delay = env_get_ulong("ds1_pupdelay", 10, ~0UL); + pnltmp.pon_delay = env_get_ulong("ds1_tondelay", 10, ~0UL); + panel_info.vl_rot = env_get_ulong("ds1_rotation", 10, 0); #endif if ( ~0UL == (pnltmp.hactive) || @@ -251,7 +251,7 @@ static int load_devicetree(void) { int rc; loff_t dtbsize; - u32 dtbaddr = getenv_ulong("dtbaddr", 16, 0UL); + u32 dtbaddr = env_get_ulong("dtbaddr", 16, 0UL); if (dtbaddr == 0) { printf("%s: don't have a valid <dtbaddr> in env!\n", __func__); @@ -263,9 +263,9 @@ static int load_devicetree(void) (size_t *)&dtbsize, NULL, 0x20000, (u_char *)dtbaddr); #else - char *dtbname = getenv("dtb"); - char *dtbdev = getenv("dtbdev"); - char *dtbpart = getenv("dtbpart"); + char *dtbname = env_get("dtb"); + char *dtbdev = env_get("dtbdev"); + char *dtbpart = env_get("dtbpart"); if (!dtbdev || !dtbpart || !dtbname) { printf("%s: <dtbdev>/<dtbpart>/<dtb> missing.\n", __func__); return -1; @@ -375,7 +375,7 @@ int ft_board_setup(void *blob, bd_t *bd) * if no simplefb is requested through environment, we don't set up * one, instead we turn off backlight. */ - if (getenv_ulong("simplefb", 10, 0) == 0) { + if (env_get_ulong("simplefb", 10, 0) == 0) { lcdbacklight(0); return 0; } @@ -405,11 +405,11 @@ static void br_summaryscreen_printenv(char *prefix, char *name, char *altname, char *suffix) { - char *envval = getenv(name); + char *envval = env_get(name); if (0 != envval) { lcd_printf("%s %s %s", prefix, envval, suffix); } else if (0 != altname) { - envval = getenv(altname); + envval = env_get(altname); if (0 != envval) lcd_printf("%s %s %s", prefix, envval, suffix); } else { @@ -447,7 +447,7 @@ void lcdpower(int on) } pin = FDTPROP(PATHINF, "pwrpin"); #else - pin = getenv_ulong("ds1_pwr", 16, ~0UL); + pin = env_get_ulong("ds1_pwr", 16, ~0UL); #endif if (pin == ~0UL) { puts("no pwrpin in dtb/env, cannot powerup display!\n"); @@ -657,7 +657,7 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_FDT) printf("<ethaddr> not set. trying DTB ... "); mac = dtbmacaddr(0); @@ -670,7 +670,7 @@ int board_eth_init(bd_t *bis) if (mac) { printf("using: %pM on ", mac); - eth_setenv_enetaddr("ethaddr", (const u8 *)mac); + eth_env_set_enetaddr("ethaddr", (const u8 *)mac); } } writel(MII_MODE_ENABLE, &cdev->miisel); diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c index a00a83a4a5..d23b9f3a4f 100644 --- a/board/BuS/eb_cpu5282/eb_cpu5282.c +++ b/board/BuS/eb_cpu5282/eb_cpu5282.c @@ -139,7 +139,7 @@ void hw_watchdog_init(void) int enable; enable = 1; - s = getenv("watchdog"); + s = env_get("watchdog"); if (s != NULL) if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0)) enable = 0; @@ -191,13 +191,13 @@ int drv_video_init(void) unsigned long splash; #endif printf("Init Video as "); - s = getenv("displaywidth"); + s = env_get("displaywidth"); if (s != NULL) display_width = simple_strtoul(s, NULL, 10); else display_width = 256; - s = getenv("displayheight"); + s = env_get("displayheight"); if (s != NULL) display_height = simple_strtoul(s, NULL, 10); else @@ -211,7 +211,7 @@ int drv_video_init(void) vcxk_init(display_width, display_height); #ifdef CONFIG_SPLASH_SCREEN - s = getenv("splashimage"); + s = env_get("splashimage"); if (s != NULL) { splash = simple_strtoul(s, NULL, 16); vcxk_acknowledge_wait(); diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index a4275091d2..af66837909 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -285,7 +285,7 @@ static int set_regdomain(void) puts("EEPROM regdomain read failed.\n"); printf("Regdomain set to %s\n", rd); - return setenv("regdomain", rd); + return env_set("regdomain", rd); } #endif @@ -515,17 +515,17 @@ int misc_init_r(void) mac[5] = mac1[3]; if (is_valid_ethaddr(mac)) - eth_setenv_enetaddr("ethaddr", mac); + eth_env_set_enetaddr("ethaddr", mac); increment_mac(mac); if (is_valid_ethaddr(mac)) - eth_setenv_enetaddr("eth1addr", mac); + eth_env_set_enetaddr("eth1addr", mac); increment_mac(mac); if (is_valid_ethaddr(mac)) - eth_setenv_enetaddr("eth2addr", mac); + eth_env_set_enetaddr("eth2addr", mac); out: #endif diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c index 3cd4dc95fe..5e75eb0b64 100644 --- a/board/CarMediaLab/flea3/flea3.c +++ b/board/CarMediaLab/flea3/flea3.c @@ -211,7 +211,7 @@ int ft_board_setup(void *blob, bd_t *bd) { "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */ }; - if (getenv("fdt_noauto")) { + if (env_get("fdt_noauto")) { puts(" Skiping ft_board_setup (fdt_noauto defined)\n"); return 0; } diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c index 2e6e9ef916..f639a37d4d 100644 --- a/board/LaCie/net2big_v2/net2big_v2.c +++ b/board/LaCie/net2big_v2/net2big_v2.c @@ -221,10 +221,10 @@ int misc_init_r(void) { init_fan(); #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { uchar mac[6]; if (lacie_read_mac_address(mac) == 0) - eth_setenv_enetaddr("ethaddr", mac); + eth_env_set_enetaddr("ethaddr", mac); } #endif init_leds(); diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 16d694716f..52f36644a3 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -83,10 +83,10 @@ int board_init(void) int misc_init_r(void) { #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { uchar mac[6]; if (lacie_read_mac_address(mac) == 0) - eth_setenv_enetaddr("ethaddr", mac); + eth_env_set_enetaddr("ethaddr", mac); } #endif return 0; diff --git a/board/Synology/ds414/cmd_syno.c b/board/Synology/ds414/cmd_syno.c index 20544e29c4..6313882a52 100644 --- a/board/Synology/ds414/cmd_syno.c +++ b/board/Synology/ds414/cmd_syno.c @@ -81,7 +81,7 @@ static int do_syno_populate(int argc, char * const argv[]) ethaddr[0], ethaddr[1], ethaddr[2], ethaddr[3], ethaddr[4], ethaddr[5]); printf("parsed %s = %s\n", var, val); - setenv(var, val); + env_set(var, val); } if (!strncmp(buf + 32, SYNO_SN_TAG, strlen(SYNO_SN_TAG))) { char *snp, *csump; @@ -111,7 +111,7 @@ static int do_syno_populate(int argc, char * const argv[]) goto out_unmap; } printf("parsed SN = %s\n", snp); - setenv("SN", snp); + env_set("SN", snp); } else { /* old style format */ unsigned char csum = 0; @@ -125,7 +125,7 @@ static int do_syno_populate(int argc, char * const argv[]) } bufp[n] = '\0'; printf("parsed SN = %s\n", buf + 32); - setenv("SN", buf + 32); + env_set("SN", buf + 32); } out_unmap: unmap_physmem(buf, len); diff --git a/board/amazon/kc1/kc1.c b/board/amazon/kc1/kc1.c index 13a9c6a0fe..eead98b24e 100644 --- a/board/amazon/kc1/kc1.c +++ b/board/amazon/kc1/kc1.c @@ -118,8 +118,8 @@ int misc_init_r(void) } if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) { - if (!getenv("reboot-mode")) - setenv("reboot-mode", (char *)reboot_mode); + if (!env_get("reboot-mode")) + env_set("reboot-mode", (char *)reboot_mode); } omap_reboot_mode_clear(); diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index b29f56d5eb..eac04d8178 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -44,18 +44,18 @@ int misc_init_r(void) mdelay(10); setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE); if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } - if (!getenv("serial#")) { + if (!env_get("serial#")) { len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, EFUSE_SN_SIZE); if (len == EFUSE_SN_SIZE) - setenv("serial#", serial); + env_set("serial#", serial); } return 0; diff --git a/board/aries/ma5d4evk/ma5d4evk.c b/board/aries/ma5d4evk/ma5d4evk.c index b9294fc881..956c297e72 100644 --- a/board/aries/ma5d4evk/ma5d4evk.c +++ b/board/aries/ma5d4evk/ma5d4evk.c @@ -325,7 +325,7 @@ int board_init(void) int board_late_init(void) { - setenv("bootmode", boot_mode_sf ? "sf" : "emmc"); + env_set("bootmode", boot_mode_sf ? "sf" : "emmc"); return 0; } diff --git a/board/aristainetos/aristainetos-v2.c b/board/aristainetos/aristainetos-v2.c index 6abc2159bb..698715ca20 100644 --- a/board/aristainetos/aristainetos-v2.c +++ b/board/aristainetos/aristainetos-v2.c @@ -651,7 +651,7 @@ int board_late_init(void) { char *my_bootdelay; char bootmode = 0; - char const *panel = getenv("panel"); + char const *panel = env_get("panel"); /* * Check the boot-source. If booting from NOR Flash, @@ -668,11 +668,11 @@ int board_late_init(void) bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 1)) ? 1 : 0) << 2; if (bootmode == 7) { - my_bootdelay = getenv("nor_bootdelay"); + my_bootdelay = env_get("nor_bootdelay"); if (my_bootdelay != NULL) - setenv("bootdelay", my_bootdelay); + env_set("bootdelay", my_bootdelay); else - setenv("bootdelay", "-2"); + env_set("bootdelay", "-2"); } /* if we have the lg panel, we can initialze it now */ diff --git a/board/armadeus/apf27/Kconfig b/board/armadeus/apf27/Kconfig index 65544a8448..a342d2e05e 100644 --- a/board/armadeus/apf27/Kconfig +++ b/board/armadeus/apf27/Kconfig @@ -1,5 +1,8 @@ if TARGET_APF27 +config SPL_LDSCRIPT + default "arch/$(ARCH)/cpu/u-boot-spl.lds" + config SYS_BOARD default "apf27" diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index c3bafd453e..858f74e5cf 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -116,7 +116,7 @@ extern void cm_remap(void); int misc_init_r (void) { - setenv("verify", "n"); + env_set("verify", "n"); return (0); } diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index 48f45b35ce..3f0860c555 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -169,7 +169,7 @@ static int set_ethaddr_from_eeprom(void) const char *ETHADDR_NAME = "ethaddr"; struct udevice *bus, *dev; - if (getenv(ETHADDR_NAME)) + if (env_get(ETHADDR_NAME)) return 0; if (uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)) { @@ -192,7 +192,7 @@ static int set_ethaddr_from_eeprom(void) return -1; } - return eth_setenv_enetaddr(ETHADDR_NAME, ethaddr); + return eth_env_set_enetaddr(ETHADDR_NAME, ethaddr); } #else static int set_ethaddr_from_eeprom(void) diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index c1f2769f1c..88bcd876c9 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -267,7 +267,7 @@ int board_late_init(void) *p = tolower(*p); strcat(name, "ek.dtb"); - setenv("dtb_name", name); + env_set("dtb_name", name); #endif return 0; } diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c index 1ad4ef93cf..df10d6a0d0 100644 --- a/board/bachmann/ot1200/ot1200.c +++ b/board/bachmann/ot1200/ot1200.c @@ -312,9 +312,9 @@ int board_eth_init(bd_t *bis) /* depending on the phy address we can detect our board version */ if (phydev->addr == 0) - setenv("boardver", ""); + env_set("boardver", ""); else - setenv("boardver", "mr"); + env_set("boardver", "mr"); printf("using phy at %d\n", phydev->addr); ret = fec_probe(bis, -1, base, bus, phydev); diff --git a/board/birdland/bav335x/board.c b/board/birdland/bav335x/board.c index 67aca3cc43..f284568ec9 100644 --- a/board/birdland/bav335x/board.c +++ b/board/birdland/bav335x/board.c @@ -162,8 +162,8 @@ int spl_start_uboot(void) #ifdef CONFIG_SPL_ENV_SUPPORT env_init(); - env_relocate_spec(); - if (getenv_yesno("boot_os") != 1) + env_load(); + if (env_get_yesno("boot_os") != 1) return 1; #endif @@ -301,8 +301,8 @@ int board_init(void) int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", "BAV335xB"); - setenv("board_rev", "B"); /* Fix me, but why bother.. */ + env_set("board_name", "BAV335xB"); + env_set("board_rev", "B"); /* Fix me, but why bother.. */ #endif return 0; } @@ -392,11 +392,11 @@ int board_eth_init(bd_t *bis) #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } #ifdef CONFIG_DRIVER_TI_CPSW diff --git a/board/bluegiga/apx4devkit/apx4devkit.c b/board/bluegiga/apx4devkit/apx4devkit.c index 2215c29c9c..25e5c3d80c 100644 --- a/board/bluegiga/apx4devkit/apx4devkit.c +++ b/board/bluegiga/apx4devkit/apx4devkit.c @@ -133,8 +133,8 @@ void get_board_serial(struct tag_serialnr *serialnr) #ifdef CONFIG_REVISION_TAG u32 get_board_rev(void) { - if (getenv("revision#") != NULL) - return simple_strtoul(getenv("revision#"), NULL, 10); + if (env_get("revision#") != NULL) + return simple_strtoul(env_get("revision#"), NULL, 10); return 0; } #endif diff --git a/board/bluewater/gurnard/gurnard.c b/board/bluewater/gurnard/gurnard.c index e82c691841..8733a9af16 100644 --- a/board/bluewater/gurnard/gurnard.c +++ b/board/bluewater/gurnard/gurnard.c @@ -341,7 +341,7 @@ int board_init(void) at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */ /* Select the second timing index for board rev 2 */ - rev_str = getenv("board_rev"); + rev_str = env_get("board_rev"); if (rev_str && !strncmp(rev_str, "2", 1)) { struct udevice *dev; @@ -368,7 +368,7 @@ int board_late_init(void) * Set MAC address so we do not need to init Ethernet before Linux * boot */ - env_str = getenv("ethaddr"); + env_str = env_get("ethaddr"); if (env_str) { struct at91_emac *emac = (struct at91_emac *)ATMEL_BASE_EMAC; /* Parse MAC address */ @@ -385,7 +385,7 @@ int board_late_init(void) &emac->sa2l); writel((env_enetaddr[4] | env_enetaddr[5] << 8), &emac->sa2h); - printf("MAC: %s\n", getenv("ethaddr")); + printf("MAC: %s\n", env_get("ethaddr")); } else { /* Not set in environment */ printf("MAC: not set\n"); diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c index 38577f30f1..999ed95c31 100644 --- a/board/bosch/shc/board.c +++ b/board/bosch/shc/board.c @@ -251,7 +251,7 @@ static void check_button_status(void) if (value == 0) { printf("front button activated !\n"); - setenv("harakiri", "1"); + env_set("harakiri", "1"); } } @@ -460,7 +460,7 @@ int board_late_init(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (shc_eeprom_valid) if (is_valid_ethaddr(header.mac_addr)) - eth_setenv_enetaddr("ethaddr", header.mac_addr); + eth_env_set_enetaddr("ethaddr", header.mac_addr); #endif return 0; @@ -545,11 +545,11 @@ int board_eth_init(bd_t *bis) #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } writel(MII_MODE_ENABLE, &cdev->miisel); @@ -565,7 +565,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_USB_ETHER) && \ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + eth_env_set_enetaddr("usbnet_devaddr", mac_addr); rv = usb_eth_initialize(bis); if (rv < 0) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 17fd6f56ea..3b92b64f6a 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -749,7 +749,7 @@ size_t display_count = ARRAY_SIZE(displays); int board_cfb_skip(void) { - return NULL != getenv("novideo"); + return NULL != env_get("novideo"); } static void setup_display(void) @@ -954,7 +954,7 @@ static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char envvalue[ARRAY_SIZE(buttons)+1]; int numpressed = read_keys(envvalue); - setenv("keybd", envvalue); + env_set("keybd", envvalue); return numpressed == 0; } @@ -974,7 +974,7 @@ static void preboot_keys(void) char keypress[ARRAY_SIZE(buttons)+1]; numpressed = read_keys(keypress); if (numpressed) { - char *kbd_magic_keys = getenv("magic_keys"); + char *kbd_magic_keys = env_get("magic_keys"); char *suffix; /* * loop over all magic keys @@ -983,7 +983,7 @@ static void preboot_keys(void) char *keys; char magic[sizeof(kbd_magic_prefix) + 1]; sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); - keys = getenv(magic); + keys = env_get(magic); if (keys) { if (!strcmp(keys, keypress)) break; @@ -993,9 +993,9 @@ static void preboot_keys(void) char cmd_name[sizeof(kbd_command_prefix) + 1]; char *cmd; sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); - cmd = getenv(cmd_name); + cmd = env_get(cmd_name); if (cmd) { - setenv("preboot", cmd); + env_set("preboot", cmd); return; } } @@ -1021,6 +1021,6 @@ int misc_init_r(void) #ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes); #endif - setenv_hex("reset_cause", get_imx_reset_cause()); + env_set_hex("reset_cause", get_imx_reset_cause()); return 0; } diff --git a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c index 5f4c634362..0267582186 100644 --- a/board/broadcom/bcm23550_w1d/bcm23550_w1d.c +++ b/board/broadcom/bcm23550_w1d/bcm23550_w1d.c @@ -103,7 +103,7 @@ int board_usb_init(int index, enum usb_init_type init) int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { debug("%s\n", __func__); - if (!getenv("serial#")) + if (!env_get("serial#")) g_dnl_set_serialnumber(CONFIG_USB_SERIALNO); return 0; } diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c index f5b94f6430..8f48ccbf1c 100644 --- a/board/broadcom/bcm28155_ap/bcm28155_ap.c +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c @@ -110,7 +110,7 @@ int board_usb_init(int index, enum usb_init_type init) int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { debug("%s\n", __func__); - if (!getenv("serial#")) + if (!env_get("serial#")) g_dnl_set_serialnumber(CONFIG_USB_SERIALNO); return 0; } diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index 0f3734587a..2d01ac25d8 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -203,7 +203,7 @@ void check_enetaddr(void) { uchar enetaddr[6]; - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) { /* signal unset/invalid ethaddr to user */ set_led(LED_INFO_BLINKING); } @@ -228,7 +228,7 @@ static void erase_environment(void) static void rescue_mode(void) { printf("Entering rescue mode..\n"); - setenv("bootsource", "rescue"); + env_set("bootsource", "rescue"); } static void check_push_button(void) diff --git a/board/cadence/xtfpga/xtfpga.c b/board/cadence/xtfpga/xtfpga.c index 0265e9bb36..f81fa95c18 100644 --- a/board/cadence/xtfpga/xtfpga.c +++ b/board/cadence/xtfpga/xtfpga.c @@ -86,14 +86,14 @@ int misc_init_r(void) * Default MAC address comes from CONFIG_ETHADDR + DIP switches 1-6. */ - char *s = getenv("ethaddr"); + char *s = env_get("ethaddr"); if (s == 0) { unsigned int x; char s[] = __stringify(CONFIG_ETHBASE); x = (*(volatile u32 *)CONFIG_SYS_FPGAREG_DIPSW) & FPGAREG_MAC_MASK; sprintf(&s[15], "%02x", x); - setenv("ethaddr", s); + env_set("ethaddr", s); } #endif /* CONFIG_CMD_NET */ diff --git a/board/ccv/xpress/xpress.c b/board/ccv/xpress/xpress.c index 542e534270..b65646588a 100644 --- a/board/ccv/xpress/xpress.c +++ b/board/ccv/xpress/xpress.c @@ -318,7 +318,7 @@ static const struct boot_mode board_boot_modes[] = { int board_late_init(void) { add_board_boot_modes(board_boot_modes); - setenv("board_name", "xpress"); + env_set("board_name", "xpress"); return 0; } diff --git a/board/compulab/cl-som-am57x/eth.c b/board/compulab/cl-som-am57x/eth.c index 0c4bf91c13..b615fb9e7e 100644 --- a/board/compulab/cl-som-am57x/eth.c +++ b/board/compulab/cl-som-am57x/eth.c @@ -95,7 +95,7 @@ static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num) int ret; uint8_t enetaddr[6]; - ret = eth_getenv_enetaddr(env_name, enetaddr); + ret = eth_env_get_enetaddr(env_name, enetaddr); if (ret) return 0; @@ -107,7 +107,7 @@ static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num) if (!is_valid_ethaddr(enetaddr)) return -1; - ret = eth_setenv_enetaddr(env_name, enetaddr); + ret = eth_env_set_enetaddr(env_name, enetaddr); if (ret) printf("cl-som-am57x: Failed to set Eth port %d MAC address\n", port_num); @@ -181,7 +181,7 @@ int board_eth_init(bd_t *bis) gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1); mdelay(20); - cpsw_phy_envval = getenv("cpsw_phy"); + cpsw_phy_envval = env_get("cpsw_phy"); if (cpsw_phy_envval != NULL) cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0); diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index c59884a8c3..a1da2780aa 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -114,10 +114,10 @@ int board_video_skip(void) { int ret; struct display_info_t *preset; - char const *panel = getenv("displaytype"); + char const *panel = env_get("displaytype"); if (!panel) /* Also accept panel for backward compatibility */ - panel = getenv("panel"); + panel = env_get("panel"); if (!panel) return -ENOENT; @@ -470,7 +470,7 @@ static int handle_mac_address(char *env_var, uint eeprom_bus) unsigned char enetaddr[6]; int rc; - rc = eth_getenv_enetaddr(env_var, enetaddr); + rc = eth_env_get_enetaddr(env_var, enetaddr); if (rc) return 0; @@ -481,7 +481,7 @@ static int handle_mac_address(char *env_var, uint eeprom_bus) if (!is_valid_ethaddr(enetaddr)) return -1; - return eth_setenv_enetaddr(env_var, enetaddr); + return eth_env_set_enetaddr(env_var, enetaddr); } #define SB_FX6_I2C_EEPROM_BUS 0 @@ -605,13 +605,13 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_shrink_to_minimum(blob, 0); /* Make room for new properties */ /* MAC addr */ - if (eth_getenv_enetaddr("ethaddr", enetaddr)) { + if (eth_env_get_enetaddr("ethaddr", enetaddr)) { fdt_find_and_setprop(blob, "/soc/aips-bus@02100000/ethernet@02188000", "local-mac-address", enetaddr, 6, 1); } - if (eth_getenv_enetaddr("eth1addr", enetaddr)) { + if (eth_env_get_enetaddr("eth1addr", enetaddr)) { fdt_find_and_setprop(blob, "/eth@pcie", "local-mac-address", enetaddr, 6, 1); } diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c index c4506b910e..6f6ba49af5 100644 --- a/board/compulab/cm_t335/cm_t335.c +++ b/board/compulab/cm_t335/cm_t335.c @@ -106,7 +106,7 @@ static int handle_mac_address(void) uchar enetaddr[6]; int rv; - rv = eth_getenv_enetaddr("ethaddr", enetaddr); + rv = eth_env_get_enetaddr("ethaddr", enetaddr); if (rv) return 0; @@ -117,7 +117,7 @@ static int handle_mac_address(void) if (!is_valid_ethaddr(enetaddr)) return -1; - return eth_setenv_enetaddr("ethaddr", enetaddr); + return eth_env_set_enetaddr("ethaddr", enetaddr); } #define AR8051_PHY_DEBUG_ADDR_REG 0x1d diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index da6709889a..be938eb2cf 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -434,7 +434,7 @@ static int handle_mac_address(void) unsigned char enetaddr[6]; int rc; - rc = eth_getenv_enetaddr("ethaddr", enetaddr); + rc = eth_env_get_enetaddr("ethaddr", enetaddr); if (rc) return 0; @@ -445,7 +445,7 @@ static int handle_mac_address(void) if (!is_valid_ethaddr(enetaddr)) return -1; - return eth_setenv_enetaddr("ethaddr", enetaddr); + return eth_env_set_enetaddr("ethaddr", enetaddr); } /* diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c index 38eb641bc4..0ff49dcdcc 100644 --- a/board/compulab/cm_t3517/cm_t3517.c +++ b/board/compulab/cm_t3517/cm_t3517.c @@ -168,7 +168,7 @@ static int cm_t3517_handle_mac_address(void) unsigned char enetaddr[6]; int ret; - ret = eth_getenv_enetaddr("ethaddr", enetaddr); + ret = eth_env_get_enetaddr("ethaddr", enetaddr); if (ret) return 0; @@ -182,7 +182,7 @@ static int cm_t3517_handle_mac_address(void) if (!is_valid_ethaddr(enetaddr)) return -1; - return eth_setenv_enetaddr("ethaddr", enetaddr); + return eth_env_set_enetaddr("ethaddr", enetaddr); } #define SB_T35_ETH_RST_GPIO 164 diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index 6437718415..31730a4d1c 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -126,7 +126,7 @@ int ft_board_setup(void *blob, bd_t *bd) uint8_t enetaddr[6]; /* MAC addr */ - if (eth_getenv_enetaddr("usbethaddr", enetaddr)) { + if (eth_env_get_enetaddr("usbethaddr", enetaddr)) { fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address", enetaddr, 6, 1); } @@ -161,7 +161,7 @@ static int handle_mac_address(void) uint8_t enetaddr[6]; int ret; - ret = eth_getenv_enetaddr("usbethaddr", enetaddr); + ret = eth_env_get_enetaddr("usbethaddr", enetaddr); if (ret) return 0; @@ -172,7 +172,7 @@ static int handle_mac_address(void) if (!is_valid_ethaddr(enetaddr)) return -1; - return eth_setenv_enetaddr("usbethaddr", enetaddr); + return eth_env_set_enetaddr("usbethaddr", enetaddr); } int board_eth_init(bd_t *bis) diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c index 61707f5b90..ed2077e361 100644 --- a/board/compulab/common/omap3_display.c +++ b/board/compulab/common/omap3_display.c @@ -400,7 +400,7 @@ void lcd_ctrl_init(void *lcdbase) { struct prcm *prcm = (struct prcm *)PRCM_BASE; char *custom_lcd; - char *displaytype = getenv("displaytype"); + char *displaytype = env_get("displaytype"); if (displaytype == NULL) return; @@ -408,7 +408,7 @@ void lcd_ctrl_init(void *lcdbase) lcd_def = env_parse_displaytype(displaytype); /* If we did not recognize the preset, check if it's an env variable */ if (lcd_def == NONE) { - custom_lcd = getenv(displaytype); + custom_lcd = env_get(displaytype); if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0) return; } diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 5cb97b4778..8cd0090887 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -235,7 +235,7 @@ int power_init_board(void) return 0; /* set level of MIPI if specified */ - lv_mipi = getenv("lv_mipi"); + lv_mipi = env_get("lv_mipi"); if (lv_mipi) return 0; @@ -583,7 +583,7 @@ int board_video_skip(void) { int i; int ret; - char const *panel = getenv("panel"); + char const *panel = env_get("panel"); if (!panel) { for (i = 0; i < ARRAY_SIZE(displays); i++) { struct display_info_t const *dev = displays + i; @@ -755,9 +755,9 @@ int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_mx6dq()) - setenv("board_rev", "MX6Q"); + env_set("board_rev", "MX6Q"); else - setenv("board_rev", "MX6DL"); + env_set("board_rev", "MX6DL"); #endif return 0; diff --git a/board/cssi/MCR3000/MCR3000.c b/board/cssi/MCR3000/MCR3000.c index 43c4cb77bb..c928881804 100644 --- a/board/cssi/MCR3000/MCR3000.c +++ b/board/cssi/MCR3000/MCR3000.c @@ -123,7 +123,7 @@ int misc_init_r(void) /* if BTN_ACQ_AL is pressed then bootdelay is changed to 60 second */ if ((in_be16(&iop->iop_pcdat) & 0x0004) == 0) - setenv("bootdelay", "60"); + env_set("bootdelay", "60"); return 0; } diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 11ea52f240..c2d2e8e882 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -131,7 +131,7 @@ int misc_init_r(void) uchar env_enetaddr[6]; int enetaddr_found; - enetaddr_found = eth_getenv_enetaddr("ethaddr", env_enetaddr); + enetaddr_found = eth_env_get_enetaddr("ethaddr", env_enetaddr); #ifdef CONFIG_MAC_ADDR_IN_SPIFLASH int spi_mac_read; @@ -147,7 +147,7 @@ int misc_init_r(void) if (!enetaddr_found) { if (!spi_mac_read) { if (is_valid_ethaddr(buff)) { - if (eth_setenv_enetaddr("ethaddr", buff)) { + if (eth_env_set_enetaddr("ethaddr", buff)) { printf("Warning: Failed to " "set MAC address from SPI flash\n"); } @@ -292,7 +292,7 @@ u32 get_board_rev(void) u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK; u32 rev = 0; - s = getenv("maxcpuclk"); + s = env_get("maxcpuclk"); if (s) maxcpuclk = simple_strtoul(s, NULL, 10); diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index 52bb7363a7..565020760d 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -293,7 +293,7 @@ static void dspwake(void) if ((REG(CHIP_REV_ID_REG) & 0x3f) == 0x10) return; - if (!strcmp(getenv("dspwake"), "no")) + if (!strcmp(env_get("dspwake"), "no")) return; *resetvect++ = 0x1E000; /* DSP Idle */ @@ -323,7 +323,7 @@ int misc_init_r(void) uint8_t tmp[20], addr[10]; - if (getenv("ethaddr") == NULL) { + if (env_get("ethaddr") == NULL) { /* Read Ethernet MAC address from EEPROM */ if (dvevm_read_mac_address(addr)) { /* Set Ethernet MAC address from EEPROM */ @@ -337,7 +337,7 @@ int misc_init_r(void) addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); - setenv("ethaddr", (char *)tmp); + env_set("ethaddr", (char *)tmp); } else { printf("Invalid MAC address read.\n"); } diff --git a/board/el/el6x/el6x.c b/board/el/el6x/el6x.c index cbe355a600..6b98b5c3eb 100644 --- a/board/el/el6x/el6x.c +++ b/board/el/el6x/el6x.c @@ -466,7 +466,7 @@ int board_late_init(void) add_board_boot_modes(board_boot_modes); #endif - setenv("board_name", BOARD_NAME); + env_set("board_name", BOARD_NAME); return 0; } diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c index e3bb5698f6..c7ec55ff82 100644 --- a/board/engicam/common/board.c +++ b/board/engicam/common/board.c @@ -21,11 +21,11 @@ static void mmc_late_init(void) char mmcblk[32]; u32 dev_no = mmc_get_env_dev(); - setenv_ulong("mmcdev", dev_no); + env_set_ulong("mmcdev", dev_no); /* Set mmcblk env */ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no); - setenv("mmcroot", mmcblk); + env_set("mmcroot", mmcblk); sprintf(cmd, "mmc dev %d", dev_no); run_command(cmd, 0); @@ -43,20 +43,20 @@ int board_late_init(void) #ifdef CONFIG_ENV_IS_IN_MMC mmc_late_init(); #endif - setenv("modeboot", "mmcboot"); + env_set("modeboot", "mmcboot"); break; case IMX6_BMODE_NAND: - setenv("modeboot", "nandboot"); + env_set("modeboot", "nandboot"); break; default: - setenv("modeboot", ""); + env_set("modeboot", ""); break; } if (is_mx6ul()) - setenv("console", "ttymxc0"); + env_set("console", "ttymxc0"); else - setenv("console", "ttymxc3"); + env_set("console", "ttymxc3"); setenv_fdt_file(); diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c index bc36fc77ee..ffd383a0ee 100644 --- a/board/engicam/geam6ul/geam6ul.c +++ b/board/engicam/geam6ul/geam6ul.c @@ -93,7 +93,7 @@ void setup_gpmi_nand(void) void setenv_fdt_file(void) { if (is_mx6ul()) - setenv("fdt_file", "imx6ul-geam-kit.dtb"); + env_set("fdt_file", "imx6ul-geam-kit.dtb"); } #ifdef CONFIG_SPL_BUILD diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c index 5b2ed066b4..3d4f713c3e 100644 --- a/board/engicam/icorem6/icorem6.c +++ b/board/engicam/icorem6/icorem6.c @@ -195,9 +195,9 @@ void setup_display(void) void setenv_fdt_file(void) { if (is_mx6dq()) - setenv("fdt_file", "imx6q-icore.dtb"); + env_set("fdt_file", "imx6q-icore.dtb"); else if(is_mx6dl() || is_mx6solo()) - setenv("fdt_file", "imx6dl-icore.dtb"); + env_set("fdt_file", "imx6dl-icore.dtb"); } #ifdef CONFIG_SPL_BUILD diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c index 10a9471730..2a321dca50 100644 --- a/board/engicam/icorem6_rqs/icorem6_rqs.c +++ b/board/engicam/icorem6_rqs/icorem6_rqs.c @@ -35,9 +35,9 @@ int board_mmc_get_env_dev(int devno) void setenv_fdt_file(void) { if (is_mx6dq()) - setenv("fdt_file", "imx6q-icore-rqs.dtb"); + env_set("fdt_file", "imx6q-icore-rqs.dtb"); else if(is_mx6dl() || is_mx6solo()) - setenv("fdt_file", "imx6dl-icore-rqs.dtb"); + env_set("fdt_file", "imx6dl-icore-rqs.dtb"); } #ifdef CONFIG_SPL_BUILD diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c index 4dcc9ea11b..fbf17242f8 100644 --- a/board/engicam/isiotmx6ul/isiotmx6ul.c +++ b/board/engicam/isiotmx6ul/isiotmx6ul.c @@ -102,9 +102,9 @@ void setenv_fdt_file(void) { if (is_mx6ul()) { #ifdef CONFIG_ENV_IS_IN_MMC - setenv("fdt_file", "imx6ul-isiot-emmc.dtb"); + env_set("fdt_file", "imx6ul-isiot-emmc.dtb"); #else - setenv("fdt_file", "imx6ul-isiot-nand.dtb"); + env_set("fdt_file", "imx6ul-isiot-nand.dtb"); #endif } } diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c index 93a02ab0ee..0c5900a15a 100644 --- a/board/esd/meesc/meesc.c +++ b/board/esd/meesc/meesc.c @@ -181,7 +181,7 @@ int checkboard(void) puts("Board: EtherCAN/2 Gateway"); break; } - if (getenv_f("serial#", str, sizeof(str)) > 0) { + if (env_get_f("serial#", str, sizeof(str)) > 0) { puts(", serial# "); puts(str); } @@ -198,7 +198,7 @@ void get_board_serial(struct tag_serialnr *serialnr) { char *str; - char *serial = getenv("serial#"); + char *serial = env_get("serial#"); if (serial) { str = strchr(serial, '_'); if (str && (strlen(str) >= 4)) { @@ -231,7 +231,8 @@ int misc_init_r(void) * In some cases this this needs to be set to 4. * Check the user has set environment mdiv to 4 to change the divisor. */ - if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) { + str = env_get("mdiv"); + if (str && (strcmp(str, "4") == 0)) { writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) | AT91SAM9_PMC_MDIV_4, &pmc->mckr); at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 83a70153e8..5d872fdfd9 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -195,7 +195,7 @@ static int adjust_vdd(ulong vdd_override) vid, vdd_target/10); /* check override variable for overriding VDD */ - vdd_string = getenv("b4qds_vdd_mv"); + vdd_string = env_get("b4qds_vdd_mv"); if (vdd_override == 0 && vdd_string && !strict_strtoul(vdd_string, 10, &vdd_string_override)) vdd_override = vdd_string_override; @@ -542,7 +542,7 @@ int configure_vsc3316_3308(void) * Extract hwconfig from environment since environment * is not setup properly yet */ - getenv_f("hwconfig", buffer, sizeof(buffer)); + env_get_f("hwconfig", buffer, sizeof(buffer)); buf = buffer; if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2", @@ -1197,8 +1197,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/b4860qds/spl.c b/board/freescale/b4860qds/spl.c index 60d7f0d48a..b1824b07a2 100644 --- a/board/freescale/b4860qds/spl.c +++ b/board/freescale/b4860qds/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <asm/spl.h> #include <malloc.h> #include <ns16550.h> @@ -101,7 +102,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; #endif i2c_init_all(); diff --git a/board/freescale/bsc9131rdb/bsc9131rdb.c b/board/freescale/bsc9131rdb/bsc9131rdb.c index fb8bb39d87..c642e88a09 100644 --- a/board/freescale/bsc9131rdb/bsc9131rdb.c +++ b/board/freescale/bsc9131rdb/bsc9131rdb.c @@ -65,8 +65,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); #ifdef CONFIG_FDT_FIXUP_PARTITIONS diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index a7772c4bf4..ed0b453e54 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -370,8 +370,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); #if defined(CONFIG_PCI) FT_FSL_PCI_SETUP; diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c index 45f463f01f..23901a4f96 100644 --- a/board/freescale/c29xpcie/c29xpcie.c +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -138,8 +138,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); #if defined(CONFIG_PCI) FT_FSL_PCI_SETUP; diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c index 94093f11a8..28541a72cb 100644 --- a/board/freescale/c29xpcie/spl.c +++ b/board/freescale/c29xpcie/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <ns16550.h> #include <malloc.h> #include <mmc.h> @@ -63,7 +64,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/common/cmd_esbc_validate.c b/board/freescale/common/cmd_esbc_validate.c index cefe3cc531..b3e5f019b8 100644 --- a/board/freescale/common/cmd_esbc_validate.c +++ b/board/freescale/common/cmd_esbc_validate.c @@ -52,7 +52,7 @@ static int do_esbc_validate(cmd_tbl_t *cmdtp, int flag, int argc, * to continue U-Boot */ sprintf(buf, "%lx", img_addr); - setenv("img_addr", buf); + env_set("img_addr", buf); if (ret) return 1; diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c index dfe5d204d4..6e750b08bc 100644 --- a/board/freescale/common/fsl_chain_of_trust.c +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -80,12 +80,12 @@ int fsl_setenv_chain_of_trust(void) * bootdelay = 0 (To disable Boot Prompt) * bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) */ - setenv("bootdelay", "0"); + env_set("bootdelay", "0"); #ifdef CONFIG_ARM - setenv("secureboot", "y"); + env_set("secureboot", "y"); #else - setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD); + env_set("bootcmd", CONFIG_CHAIN_BOOT_CMD); #endif return 0; diff --git a/board/freescale/common/ns_access.c b/board/freescale/common/ns_access.c index 1c2287d22a..0c3a54cae5 100644 --- a/board/freescale/common/ns_access.c +++ b/board/freescale/common/ns_access.c @@ -10,15 +10,15 @@ #include <asm/arch/ns_access.h> #include <asm/arch/fsl_serdes.h> -void set_devices_ns_access(struct csu_ns_dev *ns_dev, u16 val) +void set_devices_ns_access(unsigned long index, u16 val) { u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR; u32 *reg; uint32_t tmp; - reg = base + ns_dev->ind / 2; + reg = base + index / 2; tmp = in_be32(reg); - if (ns_dev->ind % 2 == 0) { + if (index % 2 == 0) { tmp &= 0x0000ffff; tmp |= val << 16; } else { @@ -34,7 +34,7 @@ static void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num) int i; for (i = 0; i < num; i++) - set_devices_ns_access(ns_dev + i, ns_dev[i].val); + set_devices_ns_access(ns_dev[i].ind, ns_dev[i].val); } void enable_layerscape_ns_access(void) @@ -50,20 +50,20 @@ void set_pcie_ns_access(int pcie, u16 val) switch (pcie) { #ifdef CONFIG_PCIE1 case PCIE1: - set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE1], val); - set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE1_IO], val); + set_devices_ns_access(CSU_CSLX_PCIE1, val); + set_devices_ns_access(CSU_CSLX_PCIE1_IO, val); return; #endif #ifdef CONFIG_PCIE2 case PCIE2: - set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE2], val); - set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE2_IO], val); + set_devices_ns_access(CSU_CSLX_PCIE2, val); + set_devices_ns_access(CSU_CSLX_PCIE2_IO, val); return; #endif #ifdef CONFIG_PCIE3 case PCIE3: - set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE3], val); - set_devices_ns_access(&ns_dev[CSU_CSLX_PCIE3_IO], val); + set_devices_ns_access(CSU_CSLX_PCIE3, val); + set_devices_ns_access(CSU_CSLX_PCIE3_IO, val); return; #endif default: diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 29aa778dbe..152ad84672 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -478,8 +478,8 @@ int mac_read_from_eeprom(void) /* Only initialize environment variables that are blank * (i.e. have not yet been set) */ - if (!getenv(enetvar)) - setenv(enetvar, ethaddr); + if (!env_get(enetvar)) + env_set(enetvar, ethaddr); } } diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index 9b65c13b1a..d6d1bfc861 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -376,7 +376,7 @@ int adjust_vdd(ulong vdd_override) vdd_target = vdd[vid]; /* check override variable for overriding VDD */ - vdd_string = getenv(CONFIG_VID_FLS_ENV); + vdd_string = env_get(CONFIG_VID_FLS_ENV); if (vdd_override == 0 && vdd_string && !strict_strtoul(vdd_string, 10, &vdd_string_override)) vdd_override = vdd_string_override; @@ -560,7 +560,7 @@ int adjust_vdd(ulong vdd_override) vdd_target = vdd[vid]; /* check override variable for overriding VDD */ - vdd_string = getenv(CONFIG_VID_FLS_ENV); + vdd_string = env_get(CONFIG_VID_FLS_ENV); if (vdd_override == 0 && vdd_string && !strict_strtoul(vdd_string, 10, &vdd_string_override)) vdd_override = vdd_string_override; diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index 93e1258295..132650c938 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -191,8 +191,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/ls1021aiot/ls1021aiot.c b/board/freescale/ls1021aiot/ls1021aiot.c index 3340e4db80..5854e2dbba 100644 --- a/board/freescale/ls1021aiot/ls1021aiot.c +++ b/board/freescale/ls1021aiot/ls1021aiot.c @@ -201,10 +201,6 @@ int board_init(void) ls102xa_smmu_stream_id_init(); -#ifdef CONFIG_LAYERSCAPE_NS_ACCESS - enable_layerscape_ns_access(); -#endif - return 0; } diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index ff32d5cb28..2da06773c4 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -435,7 +435,6 @@ void board_init_f(ulong dummy) /* Allow OCRAM access permission as R/W */ #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); - enable_layerscape_ns_access(); #endif /* diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 057a11daa8..883abf7358 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -261,10 +261,6 @@ int board_init(void) config_serdes_mux(); #endif -#ifdef CONFIG_LAYERSCAPE_NS_ACCESS - enable_layerscape_ns_access(); -#endif - if (adjust_vdd(0)) printf("Warning: Adjusting core voltage failed.\n"); diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 1dd5e69882..33f1afdc73 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -69,10 +69,6 @@ int board_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; -#ifdef CONFIG_LAYERSCAPE_NS_ACCESS - enable_layerscape_ns_access(); -#endif - #ifdef CONFIG_SECURE_BOOT /* * In case of Secure Boot, the IBR configures the SMMU diff --git a/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg b/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg index 6a5076e099..ccedf87e84 100644 --- a/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg +++ b/board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 01ee0100 # RCW -0c150010 0e000000 00000000 00000000 +0c150012 0e000000 00000000 00000000 11335559 40000012 60040000 c1000000 00000000 00000000 00000000 00238800 20124000 00003000 00000096 00000001 diff --git a/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg b/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg index d5265b846f..d3b152282f 100644 --- a/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg +++ b/board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 01ee0100 # RCW -0c150010 0e000000 00000000 00000000 +0c150012 0e000000 00000000 00000000 11335559 40005012 60040000 c1000000 00000000 00000000 00000000 00238800 20124000 00003101 00000096 00000001 diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index defcac5263..aca29bc361 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -449,7 +449,7 @@ static void initialize_dpmac_to_slot(void) >> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT; char *env_hwconfig; - env_hwconfig = getenv("hwconfig"); + env_hwconfig = env_get("hwconfig"); switch (serdes1_prtcl) { case 0x07: @@ -603,7 +603,7 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id) >> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT; int *riser_phy_addr; - char *env_hwconfig = getenv("hwconfig"); + char *env_hwconfig = env_get("hwconfig"); if (hwconfig_f("xqsgmii", env_hwconfig)) riser_phy_addr = &xqsgii_riser_phy_addr[0]; @@ -849,7 +849,7 @@ int board_eth_init(bd_t *bis) unsigned int i; char *env_hwconfig; - env_hwconfig = getenv("hwconfig"); + env_hwconfig = env_get("hwconfig"); initialize_dpmac_to_slot(); diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index f36fb9810b..83773d0af5 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -204,7 +204,7 @@ int board_init(void) val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); - env_hwconfig = getenv("hwconfig"); + env_hwconfig = env_get("hwconfig"); if (hwconfig_f("dspi", env_hwconfig) && DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index df2d768718..07ba0266d5 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -204,25 +204,12 @@ int config_board_mux(int ctrl_type) int board_init(void) { - char *env_hwconfig; - u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; #ifdef CONFIG_FSL_MC_ENET u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE; #endif - u32 val; init_final_memctl_regs(); - val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); - - env_hwconfig = getenv("hwconfig"); - - if (hwconfig_f("dspi", env_hwconfig) && - DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) - config_board_mux(MUX_TYPE_DSPI); - else - config_board_mux(MUX_TYPE_SDHC); - #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif @@ -257,31 +244,31 @@ int board_early_init_f(void) int misc_init_r(void) { -#ifdef CONFIG_FSL_QIXIS - /* - * LS2081ARDB has smart voltage translator which needs - * to be programmed as below - */ -#ifndef CONFIG_TARGET_LS2081ARDB - u8 sw; + char *env_hwconfig; + u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE; + u32 val; + + val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4); + + env_hwconfig = env_get("hwconfig"); + + if (hwconfig_f("dspi", env_hwconfig) && + DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8))) + config_board_mux(MUX_TYPE_DSPI); + else + config_board_mux(MUX_TYPE_SDHC); - sw = QIXIS_READ(arch); /* - * LS2080ARDB/LS2088ARDB RevF board has smart voltage translator + * LS2081ARDB RevF board has smart voltage translator * which needs to be programmed to enable high speed SD interface * by setting GPIO4_10 output to zero */ - if ((sw & 0xf) == 0x5) { -#endif +#ifdef CONFIG_TARGET_LS2081ARDB out_le32(GPIO4_GPDIR_ADDR, (1 << 21 | in_le32(GPIO4_GPDIR_ADDR))); out_le32(GPIO4_GPDAT_ADDR, (~(1 << 21) & in_le32(GPIO4_GPDAT_ADDR))); -#ifndef CONFIG_TARGET_LS2081ARDB - } #endif -#endif - if (hwconfig("sdhc")) config_board_mux(MUX_TYPE_SDHC); @@ -341,6 +328,32 @@ void board_quiesce_devices(void) #endif #ifdef CONFIG_OF_BOARD_SETUP +void fsl_fdt_fixup_flash(void *fdt) +{ + int offset; + +/* + * IFC and QSPI are muxed on board. + * So disable IFC node in dts if QSPI is enabled or + * disable QSPI node in dts in case QSPI is not enabled. + */ +#ifdef CONFIG_FSL_QSPI + offset = fdt_path_offset(fdt, "/soc/ifc"); + + if (offset < 0) + offset = fdt_path_offset(fdt, "/ifc"); +#else + offset = fdt_path_offset(fdt, "/soc/quadspi"); + + if (offset < 0) + offset = fdt_path_offset(fdt, "/quadspi"); +#endif + if (offset < 0) + return; + + fdt_status_disabled(fdt, offset); +} + int ft_board_setup(void *blob, bd_t *bd) { u64 base[CONFIG_NR_DRAM_BANKS]; @@ -368,6 +381,8 @@ int ft_board_setup(void *blob, bd_t *bd) fsl_fdt_fixup_dr_usb(blob, bd); + fsl_fdt_fixup_flash(blob); + #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); #endif diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index f30a1510ee..b715d8363e 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -216,7 +216,7 @@ int mac_read_from_eeprom(void) buf[i * 6 + 4], buf[i * 6 + 5]); sprintf((char *)enetvar, i ? "eth%daddr" : "ethaddr", i); - setenv((char *)enetvar, str); + env_set((char *)enetvar, str); } } } diff --git a/board/freescale/mpc837xemds/pci.c b/board/freescale/mpc837xemds/pci.c index 39c40e5cc9..e5d3dfd454 100644 --- a/board/freescale/mpc837xemds/pci.c +++ b/board/freescale/mpc837xemds/pci.c @@ -67,7 +67,7 @@ static struct pci_region pcie_regions_1[] = { static int is_pex_x2(void) { - const char *pex_x2 = getenv("pex_x2"); + const char *pex_x2 = env_get("pex_x2"); if (pex_x2 && !strcmp(pex_x2, "yes")) return 1; diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 319f0479e2..9a0ab7f2ad 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -173,7 +173,7 @@ int board_mmc_init(bd_t *bd) char buffer[HWCONFIG_BUFFER_SIZE] = {0}; int esdhc_hwconfig_enabled = 0; - if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) + if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0) esdhc_hwconfig_enabled = hwconfig_f("esdhc", buffer); if (esdhc_hwconfig_enabled == 0) diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index ed6836a930..93d54f5c4a 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -239,8 +239,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 8a4a8a2f07..71a63f188e 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -30,7 +30,7 @@ SECTIONS drivers/mtd/built-in.o (.text*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o(.text*) + env/embedded.o(.text*) *(.text*) } diff --git a/board/freescale/mx31pdk/Kconfig b/board/freescale/mx31pdk/Kconfig index 055545c930..b9fc2d5177 100644 --- a/board/freescale/mx31pdk/Kconfig +++ b/board/freescale/mx31pdk/Kconfig @@ -1,5 +1,8 @@ if TARGET_MX31PDK +config SPL_LDSCRIPT + default "arch/$(ARCH)/cpu/u-boot-spl.lds" + config SYS_BOARD default "mx31pdk" diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c index 86ec7508db..cc2c855b88 100644 --- a/board/freescale/mx51evk/mx51evk_video.c +++ b/board/freescale/mx51evk/mx51evk_video.c @@ -76,7 +76,7 @@ void setup_iomux_lcd(void) int board_video_skip(void) { int ret; - char const *e = getenv("panel"); + char const *e = env_get("panel"); if (e) { if (strcmp(e, "claa") == 0) { diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 27d606f310..ea36603686 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -246,7 +246,7 @@ static int power_init(void) if (!p) return -ENODEV; - setenv("fdt_file", "imx53-qsb.dtb"); + env_set("fdt_file", "imx53-qsb.dtb"); /* Set VDDA to 1.25V */ val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; @@ -289,7 +289,7 @@ static int power_init(void) if (!p) return -ENODEV; - setenv("fdt_file", "imx53-qsrb.dtb"); + env_set("fdt_file", "imx53-qsrb.dtb"); /* Set VDDGP to 1.25V for 1GHz on SW1 */ pmic_reg_read(p, REG_SW_0, &val); diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c index bc5e8a9d3e..5fb0f04387 100644 --- a/board/freescale/mx53loco/mx53loco_video.c +++ b/board/freescale/mx53loco/mx53loco_video.c @@ -92,7 +92,7 @@ void setup_iomux_lcd(void) int board_video_skip(void) { int ret; - char const *e = getenv("panel"); + char const *e = env_get("panel"); if (e) { if (strcmp(e, "seiko") == 0) { diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c index a5703a35b1..f8f77f616c 100644 --- a/board/freescale/mx6sabreauto/mx6sabreauto.c +++ b/board/freescale/mx6sabreauto/mx6sabreauto.c @@ -687,14 +687,14 @@ int board_late_init(void) #endif #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", "SABREAUTO"); + env_set("board_name", "SABREAUTO"); if (is_mx6dqp()) - setenv("board_rev", "MX6QP"); + env_set("board_rev", "MX6QP"); else if (is_mx6dq()) - setenv("board_rev", "MX6Q"); + env_set("board_rev", "MX6Q"); else if (is_mx6sdl()) - setenv("board_rev", "MX6DL"); + env_set("board_rev", "MX6DL"); #endif return 0; @@ -806,8 +806,8 @@ static void gpr_init(void) writel(0xF00000CF, &iomux->gpr[4]); if (is_mx6dqp()) { /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ - writel(0x007F007F, &iomux->gpr[6]); - writel(0x007F007F, &iomux->gpr[7]); + writel(0x77177717, &iomux->gpr[6]); + writel(0x77177717, &iomux->gpr[7]); } else { /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ writel(0x007F007F, &iomux->gpr[6]); diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index e4160420fa..9a562b3424 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -700,14 +700,14 @@ int board_late_init(void) #endif #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", "SABRESD"); + env_set("board_name", "SABRESD"); if (is_mx6dqp()) - setenv("board_rev", "MX6QP"); + env_set("board_rev", "MX6QP"); else if (is_mx6dq()) - setenv("board_rev", "MX6Q"); + env_set("board_rev", "MX6Q"); else if (is_mx6sdl()) - setenv("board_rev", "MX6DL"); + env_set("board_rev", "MX6DL"); #endif return 0; @@ -755,8 +755,8 @@ static void gpr_init(void) writel(0xF00000CF, &iomux->gpr[4]); if (is_mx6dqp()) { /* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ - writel(0x007F007F, &iomux->gpr[6]); - writel(0x007F007F, &iomux->gpr[7]); + writel(0x77177717, &iomux->gpr[6]); + writel(0x77177717, &iomux->gpr[7]); } else { /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ writel(0x007F007F, &iomux->gpr[6]); diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index a30c379e4d..cf7a069c56 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -674,12 +674,12 @@ int board_late_init(void) #endif #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", "EVK"); + env_set("board_name", "EVK"); if (is_mx6ul_9x9_evk()) - setenv("board_rev", "9X9"); + env_set("board_rev", "9X9"); else - setenv("board_rev", "14X14"); + env_set("board_rev", "14X14"); #endif return 0; diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c index 66b08f823e..cebcec738f 100644 --- a/board/freescale/mx6ullevk/mx6ullevk.c +++ b/board/freescale/mx6ullevk/mx6ullevk.c @@ -84,8 +84,8 @@ int board_late_init(void) #endif #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", "EVK"); - setenv("board_rev", "14X14"); + env_set("board_name", "EVK"); + env_set("board_rev", "14X14"); #endif return 0; diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 65bb575a96..aa04e993c4 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -453,8 +453,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); #if defined(CONFIG_PCI) FT_FSL_PCI_SETUP; diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 2cebc2c002..001308874e 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <ns16550.h> #include <malloc.h> #include <mmc.h> @@ -87,7 +88,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; #else env_relocate(); #endif diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 345feac0b2..bf493262d0 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -339,8 +339,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c index a117dc3a2c..94b357d446 100644 --- a/board/freescale/p1022ds/spl.c +++ b/board/freescale/p1022ds/spl.c @@ -6,6 +6,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <ns16550.h> #include <malloc.h> #include <mmc.h> @@ -100,7 +101,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; #else env_relocate(); #endif diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c index 0451722603..ccda824125 100644 --- a/board/freescale/p1023rdb/p1023rdb.c +++ b/board/freescale/p1023rdb/p1023rdb.c @@ -137,8 +137,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 51217c58e5..31c8ed9ae1 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -350,7 +350,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_VSC7385_ENET /* If a VSC7385 microcode image is present, then upload it. */ - if ((tmp = getenv("vscfw_addr")) != NULL) { + tmp = env_get("vscfw_addr"); + if (tmp) { vscfw_addr = simple_strtoul(tmp, NULL, 16); printf("uploading VSC7385 microcode from %x\n", vscfw_addr); if (vsc7385_upload_firmware((void *) vscfw_addr, @@ -438,8 +439,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index ca7ba5754e..c1d4c36b06 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -6,6 +6,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <ns16550.h> #include <malloc.h> #include <mmc.h> @@ -92,7 +93,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; #else env_relocate(); #endif diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c index f54a6ff8dc..02c89998cb 100644 --- a/board/freescale/p1_twr/p1_twr.c +++ b/board/freescale/p1_twr/p1_twr.c @@ -268,8 +268,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 21fb66f184..78ee74770c 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -219,8 +219,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c b/board/freescale/qemu-ppce500/qemu-ppce500.c index 0c65ec72d2..cf5023c505 100644 --- a/board/freescale/qemu-ppce500/qemu-ppce500.c +++ b/board/freescale/qemu-ppce500/qemu-ppce500.c @@ -211,10 +211,10 @@ int last_stage_init(void) /* -kernel boot */ prop = fdt_getprop(fdt, chosen, "qemu,boot-kernel", &len); if (prop && (len >= 8)) - setenv_hex("qemu_kernel_addr", *prop); + env_set_hex("qemu_kernel_addr", *prop); /* Give the user a variable for the host fdt */ - setenv_hex("fdt_addr_r", (ulong)fdt); + env_set_hex("fdt_addr_r", (ulong)fdt); return 0; } diff --git a/board/freescale/t102xqds/spl.c b/board/freescale/t102xqds/spl.c index b987ecea1d..3aa19e6715 100644 --- a/board/freescale/t102xqds/spl.c +++ b/board/freescale/t102xqds/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <malloc.h> #include <ns16550.h> #include <nand.h> @@ -138,7 +139,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) #endif gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c index 1b2f6b2487..20374baf48 100644 --- a/board/freescale/t102xqds/t102xqds.c +++ b/board/freescale/t102xqds/t102xqds.c @@ -363,8 +363,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c index dc6d9eeef6..ca1e49ffa7 100644 --- a/board/freescale/t102xrdb/spl.c +++ b/board/freescale/t102xrdb/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <malloc.h> #include <ns16550.h> #include <nand.h> @@ -125,7 +126,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) #endif gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index f370f72baa..8885a546fa 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -186,8 +186,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 5466fbf5f6..a36997b48c 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -245,8 +245,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c index 2e43307b2d..4fb9323873 100644 --- a/board/freescale/t104xrdb/spl.c +++ b/board/freescale/t104xrdb/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <malloc.h> #include <ns16550.h> #include <nand.h> @@ -119,7 +120,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) (uchar *)CONFIG_ENV_ADDR); #endif gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index d4c3d4dcb4..2818cdf274 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -132,8 +132,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t208xqds/spl.c b/board/freescale/t208xqds/spl.c index d7d716b690..36961dc9b0 100644 --- a/board/freescale/t208xqds/spl.c +++ b/board/freescale/t208xqds/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <malloc.h> #include <ns16550.h> #include <nand.h> @@ -124,7 +125,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) #endif gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index 26093ea9d2..ed3d3f4b71 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -451,8 +451,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t208xrdb/spl.c b/board/freescale/t208xrdb/spl.c index b43140148b..f0cc34d788 100644 --- a/board/freescale/t208xrdb/spl.c +++ b/board/freescale/t208xrdb/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <malloc.h> #include <ns16550.h> #include <nand.h> @@ -94,7 +95,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) #endif gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index 1ab05ec9fd..619495e6ab 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -118,8 +118,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t4qds/spl.c b/board/freescale/t4qds/spl.c index 9ecdaedda3..750f155493 100644 --- a/board/freescale/t4qds/spl.c +++ b/board/freescale/t4qds/spl.c @@ -5,6 +5,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <asm/spl.h> #include <malloc.h> #include <ns16550.h> @@ -129,7 +130,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) #endif gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c index 35ad19e045..7136acafea 100644 --- a/board/freescale/t4qds/t4240emu.c +++ b/board/freescale/t4qds/t4240emu.c @@ -70,8 +70,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c index 8f9e7e8255..7b71b541fd 100644 --- a/board/freescale/t4qds/t4240qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -265,7 +265,7 @@ static int adjust_vdd(ulong vdd_override) vdd_target = vdd[vid]; /* check override variable for overriding VDD */ - vdd_string = getenv("t4240qds_vdd_mv"); + vdd_string = env_get("t4240qds_vdd_mv"); if (vdd_override == 0 && vdd_string && !strict_strtoul(vdd_string, 10, &vdd_string_override)) vdd_override = vdd_string_override; @@ -684,8 +684,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/freescale/t4rdb/spl.c b/board/freescale/t4rdb/spl.c index 5feab1cfcd..932954e93d 100644 --- a/board/freescale/t4rdb/spl.c +++ b/board/freescale/t4rdb/spl.c @@ -8,6 +8,7 @@ #include <common.h> #include <console.h> +#include <environment.h> #include <asm/spl.h> #include <malloc.h> #include <ns16550.h> @@ -87,7 +88,7 @@ void board_init_r(gd_t *gd, ulong dest_addr) (uchar *)CONFIG_ENV_ADDR); gd->env_addr = (ulong)(CONFIG_ENV_ADDR); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; i2c_init_all(); diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index bdd6f4ef49..f511706b9f 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -97,8 +97,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 46404b4d59..e9865b4adb 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -1160,7 +1160,7 @@ void setup_board_gpio(int board, struct ventana_board_info *info) char arg[10]; size_t len; int i; - int quiet = simple_strtol(getenv("quiet"), NULL, 10); + int quiet = simple_strtol(env_get("quiet"), NULL, 10); if (board >= GW_UNKNOWN) return; diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 89848c8f07..4ddc7e1fa2 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -298,11 +298,11 @@ int board_eth_init(bd_t *bis) #endif /* default to the first detected enet dev */ - if (!getenv("ethprime")) { + if (!env_get("ethprime")) { struct eth_device *dev = eth_get_dev_by_index(0); if (dev) { - setenv("ethprime", dev->name); - printf("set ethprime to %s\n", getenv("ethprime")); + env_set("ethprime", dev->name); + printf("set ethprime to %s\n", env_get("ethprime")); } } @@ -579,7 +579,7 @@ void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, */ void get_board_serial(struct tag_serialnr *serialnr) { - char *serial = getenv("serial#"); + char *serial = env_get("serial#"); if (serial) { serialnr->high = 0; @@ -658,11 +658,11 @@ int checkboard(void) int quiet; /* Quiet or minimal output mode */ quiet = 0; - p = getenv("quiet"); + p = env_get("quiet"); if (p) quiet = simple_strtol(p, NULL, 10); else - setenv("quiet", "0"); + env_set("quiet", "0"); puts("\nGateworks Corporation Copyright 2014\n"); if (info->model[0]) { @@ -737,26 +737,26 @@ int misc_init_r(void) else if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO)) cputype = "imx6dl"; - setenv("soctype", cputype); + env_set("soctype", cputype); if (8 << (ventana_info.nand_flash_size-1) >= 2048) - setenv("flash_layout", "large"); + env_set("flash_layout", "large"); else - setenv("flash_layout", "normal"); + env_set("flash_layout", "normal"); memset(str, 0, sizeof(str)); for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++) str[i] = tolower(info->model[i]); - setenv("model", str); - if (!getenv("fdt_file")) { + env_set("model", str); + if (!env_get("fdt_file")) { sprintf(fdt, "%s-%s.dtb", cputype, str); - setenv("fdt_file", fdt); + env_set("fdt_file", fdt); } p = strchr(str, '-'); if (p) { *p++ = 0; - setenv("model_base", str); + env_set("model_base", str); sprintf(fdt, "%s-%s.dtb", cputype, str); - setenv("fdt_file1", fdt); + env_set("fdt_file1", fdt); if (board_type != GW551x && board_type != GW552x && board_type != GW553x && @@ -765,30 +765,30 @@ int misc_init_r(void) str[5] = 'x'; str[6] = 0; sprintf(fdt, "%s-%s.dtb", cputype, str); - setenv("fdt_file2", fdt); + env_set("fdt_file2", fdt); } /* initialize env from EEPROM */ if (test_bit(EECONFIG_ETH0, info->config) && - !getenv("ethaddr")) { - eth_setenv_enetaddr("ethaddr", info->mac0); + !env_get("ethaddr")) { + eth_env_set_enetaddr("ethaddr", info->mac0); } if (test_bit(EECONFIG_ETH1, info->config) && - !getenv("eth1addr")) { - eth_setenv_enetaddr("eth1addr", info->mac1); + !env_get("eth1addr")) { + eth_env_set_enetaddr("eth1addr", info->mac1); } /* board serial-number */ sprintf(str, "%6d", info->serial); - setenv("serial#", str); + env_set("serial#", str); /* memory MB */ sprintf(str, "%d", (int) (gd->ram_size >> 20)); - setenv("mem_mb", str); + env_set("mem_mb", str); } /* Set a non-initialized hwconfig based on board configuration */ - if (!strcmp(getenv("hwconfig"), "_UNKNOWN_")) { + if (!strcmp(env_get("hwconfig"), "_UNKNOWN_")) { buf[0] = 0; if (gpio_cfg[board_type].rs232_en) strcat(buf, "rs232;"); @@ -798,7 +798,7 @@ int misc_init_r(void) if (strlen(buf) + strlen(buf1) < sizeof(buf)) strcat(buf, buf1); } - setenv("hwconfig", buf); + env_set("hwconfig", buf); } /* setup baseboard specific GPIO based on board and env */ @@ -1035,7 +1035,7 @@ int fdt_fixup_sky2(void *blob, int np, struct pci_dev *dev) int j; sprintf(mac, "eth1addr"); - tmp = getenv(mac); + tmp = env_get(mac); if (tmp) { for (j = 0; j < 6; j++) { mac_addr[j] = tmp ? @@ -1118,8 +1118,8 @@ int ft_board_setup(void *blob, bd_t *bd) { "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */ { "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */ }; - const char *model = getenv("model"); - const char *display = getenv("display"); + const char *model = env_get("model"); + const char *display = env_get("display"); int i; char rev = 0; @@ -1131,7 +1131,7 @@ int ft_board_setup(void *blob, bd_t *bd) } } - if (getenv("fdt_noauto")) { + if (env_get("fdt_noauto")) { puts(" Skiping ft_board_setup (fdt_noauto defined)\n"); return 0; } @@ -1152,15 +1152,15 @@ int ft_board_setup(void *blob, bd_t *bd) printf(" Adjusting FDT per EEPROM for %s...\n", model); /* board serial number */ - fdt_setprop(blob, 0, "system-serial", getenv("serial#"), - strlen(getenv("serial#")) + 1); + fdt_setprop(blob, 0, "system-serial", env_get("serial#"), + strlen(env_get("serial#")) + 1); /* board (model contains model from device-tree) */ fdt_setprop(blob, 0, "board", info->model, strlen((const char *)info->model) + 1); /* set desired digital video capture format */ - ft_sethdmiinfmt(blob, getenv("hdmiinfmt")); + ft_sethdmiinfmt(blob, env_get("hdmiinfmt")); /* * Board model specific fixups @@ -1315,7 +1315,7 @@ int ft_board_setup(void *blob, bd_t *bd) } #if defined(CONFIG_CMD_PCI) - if (!getenv("nopcifixup")) + if (!env_get("nopcifixup")) ft_board_pci_fixup(blob, bd); #endif @@ -1324,7 +1324,7 @@ int ft_board_setup(void *blob, bd_t *bd) * remove nodes by alias path if EEPROM config tells us the * peripheral is not loaded on the board. */ - if (getenv("fdt_noconfig")) { + if (env_get("fdt_noconfig")) { puts(" Skiping periperhal config (fdt_noconfig defined)\n"); return 0; } diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 69a638d71d..9524da7daf 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -690,9 +690,9 @@ int spl_start_uboot(void) debug("%s\n", __func__); #ifdef CONFIG_SPL_ENV_SUPPORT env_init(); - env_relocate_spec(); - debug("boot_os=%s\n", getenv("boot_os")); - if (getenv_yesno("boot_os") == 1) + env_load(); + debug("boot_os=%s\n", env_get("boot_os")); + if (env_get_yesno("boot_os") == 1) ret = 0; #else /* use i2c-0:0x50:0x00 for falcon boot mode (0=linux, else uboot) */ diff --git a/board/gdsys/a38x/keyprogram.c b/board/gdsys/a38x/keyprogram.c index a4a6f1cca5..d75e08b39f 100644 --- a/board/gdsys/a38x/keyprogram.c +++ b/board/gdsys/a38x/keyprogram.c @@ -129,12 +129,12 @@ int load_and_run_keyprog(void) char *hexprog; struct key_program *prog; - cmd = getenv("loadkeyprogram"); + cmd = env_get("loadkeyprogram"); if (!cmd || run_command(cmd, 0)) return 1; - hexprog = getenv("keyprogram"); + hexprog = env_get("keyprogram"); if (decode_hexstr(hexprog, &binprog)) return 1; diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c index c6566e9196..7e485074ce 100644 --- a/board/gdsys/mpc8308/hrcon.c +++ b/board/gdsys/mpc8308/hrcon.c @@ -103,7 +103,7 @@ int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) int checkboard(void) { - char *s = getenv("serial#"); + char *s = env_get("serial#"); bool hw_type_cat = pca9698_get_value(0x20, 20); puts("Board: "); diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c index 34e9d1956e..fec691515d 100644 --- a/board/gdsys/mpc8308/strider.c +++ b/board/gdsys/mpc8308/strider.c @@ -106,7 +106,7 @@ int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) int checkboard(void) { - char *s = getenv("serial#"); + char *s = env_get("serial#"); bool hw_type_cat = pca9698_get_value(0x20, 18); puts("Board: "); diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c index 95f11fb69f..1813a58e60 100644 --- a/board/gdsys/p1022/controlcenterd-id.c +++ b/board/gdsys/p1022/controlcenterd-id.c @@ -217,7 +217,7 @@ static u8 *get_2nd_stage_bl_location(ulong target_addr) { ulong addr; #ifdef CCDM_SECOND_STAGE - addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR); + addr = env_get_ulong("loadaddr", 16, CONFIG_LOADADDR); #else addr = target_addr; #endif @@ -235,7 +235,7 @@ static u8 *get_image_location(void) { ulong addr; /* TODO use other area? */ - addr = getenv_ulong("loadaddr", 16, CONFIG_LOADADDR); + addr = env_get_ulong("loadaddr", 16, CONFIG_LOADADDR); return (u8 *)(addr); } #endif @@ -1043,13 +1043,13 @@ static int second_stage_init(void) goto failure; /* run "prepboot" from env to get "mmcdev" set */ - cptr = getenv("prepboot"); + cptr = env_get("prepboot"); if (cptr && !run_command(cptr, 0)) - mmcdev = getenv("mmcdev"); + mmcdev = env_get("mmcdev"); if (!mmcdev) goto failure; - cptr = getenv("ramdiskimage"); + cptr = env_get("ramdiskimage"); if (cptr) image_path = cptr; diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c index 01064dcfde..9fb814d8c7 100644 --- a/board/gdsys/p1022/controlcenterd.c +++ b/board/gdsys/p1022/controlcenterd.c @@ -223,7 +223,7 @@ void hw_watchdog_reset(void) #ifdef CONFIG_TRAILBLAZER int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return run_command(getenv("bootcmd"), flag); + return run_command(env_get("bootcmd"), flag); } int board_early_init_r(void) @@ -335,8 +335,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c index e3f82b0a80..2f5974a246 100644 --- a/board/grinn/chiliboard/board.c +++ b/board/grinn/chiliboard/board.c @@ -126,11 +126,11 @@ int board_late_init(void) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } mac_lo = readl(&cdev->macid1l); @@ -142,9 +142,9 @@ int board_late_init(void) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("eth1addr")) { + if (!env_get("eth1addr")) { if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("eth1addr", mac_addr); + eth_env_set_enetaddr("eth1addr", mac_addr); } #endif diff --git a/board/grinn/liteboard/board.c b/board/grinn/liteboard/board.c index 817e22fd45..941e7ea2c8 100644 --- a/board/grinn/liteboard/board.c +++ b/board/grinn/liteboard/board.c @@ -149,7 +149,7 @@ int board_mmc_init(bd_t *bis) static int check_mmc_autodetect(void) { - char *autodetect_str = getenv("mmcautodetect"); + char *autodetect_str = env_get("mmcautodetect"); if ((autodetect_str != NULL) && (strcmp(autodetect_str, "yes") == 0)) { @@ -168,12 +168,12 @@ void board_late_mmc_init(void) if (!check_mmc_autodetect()) return; - setenv_ulong("mmcdev", dev_no); + env_set_ulong("mmcdev", dev_no); /* Set mmcblk env */ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no); - setenv("mmcroot", mmcblk); + env_set("mmcroot", mmcblk); sprintf(cmd, "mmc dev %d", dev_no); run_command(cmd, 0); diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c index d76c28bd3c..bfc5fd1c46 100644 --- a/board/gumstix/pepper/board.c +++ b/board/gumstix/pepper/board.c @@ -239,7 +239,7 @@ int board_eth_init(bd_t *bis) uint32_t mac_hi, mac_lo; const char *devname; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); mac_hi = readl(&cdev->macid0h); @@ -250,7 +250,7 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel); diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index 1af2207867..f7c05ab08f 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -80,11 +80,11 @@ int misc_init_r(void) boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff; sprintf(envbuffer, "bootcmd%d", boot_choice); - if (getenv(envbuffer)) { + if (env_get(envbuffer)) { sprintf(envbuffer, "run bootcmd%d", boot_choice); - setenv("bootcmd", envbuffer); + env_set("bootcmd", envbuffer); } else - setenv("bootcmd", ""); + env_set("bootcmd", ""); return 0; } diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c index 47bce4daa6..c513d0af10 100644 --- a/board/hisilicon/hikey/hikey.c +++ b/board/hisilicon/hikey/hikey.c @@ -345,7 +345,7 @@ int board_init(void) static int init_dwmmc(void) { - int ret; + int ret = 0; #ifdef CONFIG_MMC_DW diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 1deb2bdd8b..0a02e44046 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -83,7 +83,7 @@ int board_late_init(void) if (gpio_get_value(HOT_WATER_BUTTON)) return 0; - setenv("bootcmd", "run swupdate"); + env_set("bootcmd", "run swupdate"); return 0; } diff --git a/board/intel/edison/edison.c b/board/intel/edison/edison.c index a1a7d4d7c8..4b1e6d0f47 100644 --- a/board/intel/edison/edison.c +++ b/board/intel/edison/edison.c @@ -5,6 +5,7 @@ */ #include <common.h> #include <dwc3-uboot.h> +#include <environment.h> #include <mmc.h> #include <u-boot/md5.h> #include <usb.h> @@ -63,14 +64,14 @@ static void assign_serial(void) snprintf(usb0addr, sizeof(usb0addr), "02:00:86:%02x:%02x:%02x", ssn[13], ssn[14], ssn[15]); - setenv("usb0addr", usb0addr); + env_set("usb0addr", usb0addr); for (i = 0; i < 16; i++) snprintf(&serial[2 * i], 3, "%02x", ssn[i]); - setenv("serial#", serial); + env_set("serial#", serial); #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) - saveenv(); + env_save(); #endif } @@ -85,19 +86,19 @@ static void assign_hardware_id(void) printf("Can't retrieve hardware revision\n"); snprintf(hardware_id, sizeof(hardware_id), "%02X", v.hardware_id); - setenv("hardware_id", hardware_id); + env_set("hardware_id", hardware_id); #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) - saveenv(); + env_save(); #endif } int board_late_init(void) { - if (!getenv("serial#")) + if (!env_get("serial#")) assign_serial(); - if (!getenv("hardware_id")) + if (!env_get("hardware_id")) assign_hardware_id(); return 0; diff --git a/board/isee/igep003x/board.c b/board/isee/igep003x/board.c index e33170d65f..d33dc960a5 100644 --- a/board/isee/igep003x/board.c +++ b/board/isee/igep003x/board.c @@ -194,13 +194,13 @@ int board_late_init(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG switch (get_board_revision()) { case 0: - setenv("board_name", "igep0034-lite"); + env_set("board_name", "igep0034-lite"); break; case 1: - setenv("board_name", "igep0034"); + env_set("board_name", "igep0034"); break; default: - setenv("board_name", "igep0033"); + env_set("board_name", "igep0033"); break; } #endif @@ -264,7 +264,7 @@ int board_eth_init(bd_t *bis) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); mac_hi = readl(&cdev->macid0h); @@ -275,7 +275,7 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN), diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 843d35eb2d..a7a75601dd 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -251,10 +251,10 @@ void set_fdt(void) { switch (gd->bd->bi_arch_number) { case MACH_TYPE_IGEP0020: - setenv("fdtfile", "omap3-igep0020.dtb"); + env_set("fdtfile", "omap3-igep0020.dtb"); break; case MACH_TYPE_IGEP0030: - setenv("fdtfile", "omap3-igep0030.dtb"); + env_set("fdtfile", "omap3-igep0030.dtb"); break; } } diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 408079c9a1..6cd281218e 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -51,24 +51,24 @@ int set_km_env(void) pnvramaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM - CONFIG_KM_PNVRAM; sprintf((char *)buf, "0x%x", pnvramaddr); - setenv("pnvramaddr", (char *)buf); + env_set("pnvramaddr", (char *)buf); /* try to read rootfssize (ram image) from environment */ - p = getenv("rootfssize"); + p = env_get("rootfssize"); if (p != NULL) strict_strtoul(p, 16, &rootfssize); pram = (rootfssize + CONFIG_KM_RESERVED_PRAM + CONFIG_KM_PHRAM + CONFIG_KM_PNVRAM) / 0x400; sprintf((char *)buf, "0x%x", pram); - setenv("pram", (char *)buf); + env_set("pram", (char *)buf); varaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM; sprintf((char *)buf, "0x%x", varaddr); - setenv("varaddr", (char *)buf); + env_set("varaddr", (char *)buf); kernelmem = gd->ram_size - 0x400 * pram; sprintf((char *)buf, "0x%x", kernelmem); - setenv("kernelmem", (char *)buf); + env_set("kernelmem", (char *)buf); return 0; } @@ -169,7 +169,7 @@ static int do_setboardid(cmd_tbl_t *cmdtp, int flag, int argc, return 1; } strcpy((char *)buf, p); - setenv("boardid", (char *)buf); + env_set("boardid", (char *)buf); printf("set boardid=%s\n", buf); p = get_local_var("IVM_HWKey"); @@ -178,7 +178,7 @@ static int do_setboardid(cmd_tbl_t *cmdtp, int flag, int argc, return 1; } strcpy((char *)buf, p); - setenv("hwkey", (char *)buf); + env_set("hwkey", (char *)buf); printf("set hwkey=%s\n", buf); printf("Execute manually saveenv for persistent storage.\n"); @@ -236,10 +236,10 @@ static int do_checkboardidhwk(cmd_tbl_t *cmdtp, int flag, int argc, } /* now try to read values from environment if available */ - p = getenv("boardid"); + p = env_get("boardid"); if (p != NULL) rc = strict_strtoul(p, 16, &envbid); - p = getenv("hwkey"); + p = env_get("hwkey"); if (p != NULL) rc = strict_strtoul(p, 16, &envhwkey); @@ -253,7 +253,7 @@ static int do_checkboardidhwk(cmd_tbl_t *cmdtp, int flag, int argc, * BoardId/HWkey not available in the environment, so try the * environment variable for BoardId/HWkey list */ - char *bidhwklist = getenv("boardIdListHex"); + char *bidhwklist = env_get("boardIdListHex"); if (bidhwklist) { int found = 0; @@ -311,9 +311,9 @@ static int do_checkboardidhwk(cmd_tbl_t *cmdtp, int flag, int argc, envbid = bid; envhwkey = hwkey; sprintf(buf, "%lx", bid); - setenv("boardid", buf); + env_set("boardid", buf); sprintf(buf, "%lx", hwkey); - setenv("hwkey", buf); + env_set("hwkey", buf); } } /* end while( ! found ) */ } @@ -355,7 +355,7 @@ static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, int argc, #if defined(CONFIG_POST) testpin = post_hotkeys_pressed(); #endif - s = getenv("test_bank"); + s = env_get("test_bank"); /* when test_bank is not set, act as if testpin is not asserted */ testboot = (testpin != 0) && (s); if (verbose) { diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index e9e518cf72..f1321d9899 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -261,7 +261,7 @@ int ivm_analyze_eeprom(unsigned char *buf, int len) GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8) GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64) - tmp = (unsigned char *) getenv("IVM_DeviceName"); + tmp = (unsigned char *)env_get("IVM_DeviceName"); if (tmp) { int len = strlen((char *)tmp); int i = 0; @@ -310,11 +310,11 @@ static int ivm_populate_env(unsigned char *buf, int len) #ifndef CONFIG_KMTEGR1 /* if an offset is defined, add it */ process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true); - setenv((char *)"ethaddr", (char *)valbuf); + env_set((char *)"ethaddr", (char *)valbuf); #ifdef CONFIG_KMVECT1 /* KMVECT1 has two ethernet interfaces */ process_mac(valbuf, page2, 1, true); - setenv((char *)"eth1addr", (char *)valbuf); + env_set((char *)"eth1addr", (char *)valbuf); #endif #else /* KMTEGR1 has a special setup. eth0 has no connection to the outside and @@ -322,9 +322,9 @@ static int ivm_populate_env(unsigned char *buf, int len) * gets the official MAC address from the IVM */ process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, false); - setenv((char *)"ethaddr", (char *)valbuf); + env_set((char *)"ethaddr", (char *)valbuf); process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true); - setenv((char *)"eth1addr", (char *)valbuf); + env_set((char *)"eth1addr", (char *)valbuf); #endif return 0; diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 8020c379fd..5e07faa818 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -263,11 +263,11 @@ int last_stage_init(void) mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR); if (piggy_present()) { - setenv("ethact", "UEC2"); - setenv("netdev", "eth1"); + env_set("ethact", "UEC2"); + env_set("netdev", "eth1"); puts("using PIGGY for network boot\n"); } else { - setenv("netdev", "eth0"); + env_set("netdev", "eth0"); puts("using frontport for network boot\n"); } #endif @@ -280,7 +280,7 @@ int last_stage_init(void) if (dip_switch != 0) { /* start bootloader */ puts("DIP: Enabled\n"); - setenv("actual_bank", "0"); + env_set("actual_bank", "0"); } #endif set_km_env(); diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 85785ffc02..af1ebc4101 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -193,7 +193,7 @@ static void set_bootcount_addr(void) unsigned int bootcountaddr; bootcountaddr = gd->ram_size - BOOTCOUNT_ADDR; sprintf((char *)buf, "0x%x", bootcountaddr); - setenv("bootcountaddr", (char *)buf); + env_set("bootcountaddr", (char *)buf); } int misc_init_r(void) @@ -201,7 +201,7 @@ int misc_init_r(void) #if defined(CONFIG_KM_MGCOGE3UN) char *wait_for_ne; u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE); - wait_for_ne = getenv("waitforne"); + wait_for_ne = env_get("waitforne"); if ((wait_for_ne != NULL) && (dip_switch == 0)) { if (strcmp(wait_for_ne, "true") == 0) { @@ -299,7 +299,7 @@ int board_late_init(void) if (dip_switch != 0) { /* start bootloader */ puts("DIP: Enabled\n"); - setenv("actual_bank", "0"); + env_set("actual_bank", "0"); } #endif diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index abb20196c5..8c9d6b167d 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -222,7 +222,7 @@ int last_stage_init(void) if (dip_switch != 0) { /* start bootloader */ puts("DIP: Enabled\n"); - setenv("actual_bank", "0"); + env_set("actual_bank", "0"); } #endif set_km_env(); @@ -239,7 +239,7 @@ void fdt_fixup_fman_mac_addresses(void *blob) unsigned char mac_addr[6]; /* get the mac addr from env */ - tmp = getenv("ethaddr"); + tmp = env_get("ethaddr"); if (!tmp) { printf("ethaddr env variable not defined\n"); return; @@ -271,8 +271,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c index 980cd6288c..f0ace03009 100644 --- a/board/kosagi/novena/novena.c +++ b/board/kosagi/novena/novena.c @@ -240,7 +240,7 @@ int misc_init_r(void) int ret; /* If 'ethaddr' is already set, do nothing. */ - if (getenv("ethaddr")) + if (env_get("ethaddr")) return 0; /* EEPROM is at bus 2. */ @@ -264,7 +264,7 @@ int misc_init_r(void) } /* Set ethernet address from EEPROM. */ - eth_setenv_enetaddr("ethaddr", data.mac); + eth_env_set_enetaddr("ethaddr", data.mac); return ret; } diff --git a/board/lg/sniper/sniper.c b/board/lg/sniper/sniper.c index f924645dc0..a299f761f9 100644 --- a/board/lg/sniper/sniper.c +++ b/board/lg/sniper/sniper.c @@ -133,8 +133,8 @@ int misc_init_r(void) } if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) { - if (!getenv("reboot-mode")) - setenv("reboot-mode", (char *)reboot_mode); + if (!env_get("reboot-mode")) + env_set("reboot-mode", (char *)reboot_mode); } omap_reboot_mode_clear(); diff --git a/board/liebherr/mccmon6/mccmon6.c b/board/liebherr/mccmon6/mccmon6.c index e265e2a732..4f7e018dea 100644 --- a/board/liebherr/mccmon6/mccmon6.c +++ b/board/liebherr/mccmon6/mccmon6.c @@ -367,7 +367,7 @@ int board_init(void) int board_late_init(void) { - setenv("board_name", "mccmon6"); + env_set("board_name", "mccmon6"); return 0; } @@ -467,7 +467,7 @@ int spl_start_uboot(void) return 1; env_init(); - ret = getenv_f("boot_os", s, sizeof(s)); + ret = env_get_f("boot_os", s, sizeof(s)); if ((ret != -1) && (strcmp(s, "no") == 0)) return 1; @@ -481,7 +481,7 @@ int spl_start_uboot(void) * recovery_status = <any value> -> start SWUpdate * */ - ret = getenv_f("recovery_status", s, sizeof(s)); + ret = env_get_f("recovery_status", s, sizeof(s)); if (ret != -1) return 1; diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index 0a7d4124a6..78fc5466b6 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -173,11 +173,11 @@ int board_init(void) int board_late_init(void) { - setenv("board_name", "imx6logic"); + env_set("board_name", "imx6logic"); if (is_mx6dq()) { - setenv("board_rev", "MX6DQ"); - setenv("fdt_file", "imx6q-logicpd.dtb"); + env_set("board_rev", "MX6DQ"); + env_set("fdt_file", "imx6q-logicpd.dtb"); } return 0; diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index 7990dd2513..fe3f9e664f 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -219,8 +219,8 @@ int board_late_init(void) gd->bd->bi_arch_number = board->machine_id; /* If the user has not set fdtimage, set the default */ - if (!getenv("fdtimage")) - setenv("fdtimage", board->fdtfile); + if (!env_get("fdtimage")) + env_set("fdtimage", board->fdtfile); } /* restore hsusb0_data5 pin as hsusb0_data5 */ @@ -320,7 +320,7 @@ void set_muxconf_regs(void) MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)); /*SDRC_DQS2*/ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)); /*SDRC_DQS3*/ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); /*SDRC_CKE0*/ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)); /*SDRC_CKE1*/ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | DIS | M0)); /*SDRC_CKE1*/ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); /*GPMC_A1*/ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); /*GPMC_A2*/ diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index e91f874a2b..e6c2526ea1 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -130,10 +130,10 @@ int board_eth_init(bd_t *bis) uchar eth_addr[6]; rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + if (!eth_env_get_enetaddr(STR_ENV_ETHADDR, eth_addr)) { dev = eth_get_dev_by_index(0); if (dev) { - eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + eth_env_set_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); } else { printf("zoom1: Couldn't get eth device\n"); rc = -1; diff --git a/board/micronas/vct/vct.c b/board/micronas/vct/vct.c index 8bf8d5f4e8..510746d35c 100644 --- a/board/micronas/vct/vct.c +++ b/board/micronas/vct/vct.c @@ -72,7 +72,7 @@ int dram_init(void) int checkboard(void) { char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); + int i = env_get_f("serial#", buf, sizeof(buf)); u32 config0 = read_c0_prid(); if ((config0 & 0xff0000) == PRID_COMP_LEGACY diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index 6a4427a42e..7764288811 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -234,18 +234,18 @@ void setup_board_tags(struct tag **in_params) params->u.core.rootdev = 0x0; /* append omap atag only if env setup_omap_atag is set to 1 */ - str = getenv("setup_omap_atag"); + str = env_get("setup_omap_atag"); if (!str || str[0] != '1') return; - str = getenv("setup_console_atag"); + str = env_get("setup_console_atag"); if (str && str[0] == '1') setup_console_atag = 1; else setup_console_atag = 0; - setup_boot_reason_atag = getenv("setup_boot_reason_atag"); - setup_boot_mode_atag = getenv("setup_boot_mode_atag"); + setup_boot_reason_atag = env_get("setup_boot_reason_atag"); + setup_boot_mode_atag = env_get("setup_boot_mode_atag"); params = *in_params; t = (struct tag_omap *)¶ms->u; @@ -413,7 +413,7 @@ int misc_init_r(void) /* set env variable attkernaddr for relocated kernel */ sprintf(buf, "%#x", KERNEL_ADDRESS); - setenv("attkernaddr", buf); + env_set("attkernaddr", buf); /* initialize omap tags */ init_omap_tags(); diff --git a/board/overo/overo.c b/board/overo/overo.c index adf33cfd37..140e34d4dd 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -172,47 +172,47 @@ int misc_init_r(void) expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("defaultdisplay", "dvi"); - setenv("expansionname", "summit"); + env_set("defaultdisplay", "dvi"); + env_set("expansionname", "summit"); break; case GUMSTIX_TOBI: printf("Recognized Tobi expansion board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("defaultdisplay", "dvi"); - setenv("expansionname", "tobi"); + env_set("defaultdisplay", "dvi"); + env_set("expansionname", "tobi"); break; case GUMSTIX_TOBI_DUO: printf("Recognized Tobi Duo expansion board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("expansionname", "tobiduo"); + env_set("expansionname", "tobiduo"); break; case GUMSTIX_PALO35: printf("Recognized Palo35 expansion board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("defaultdisplay", "lcd35"); - setenv("expansionname", "palo35"); + env_set("defaultdisplay", "lcd35"); + env_set("expansionname", "palo35"); break; case GUMSTIX_PALO43: printf("Recognized Palo43 expansion board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("defaultdisplay", "lcd43"); - setenv("expansionname", "palo43"); + env_set("defaultdisplay", "lcd43"); + env_set("expansionname", "palo43"); break; case GUMSTIX_CHESTNUT43: printf("Recognized Chestnut43 expansion board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("defaultdisplay", "lcd43"); - setenv("expansionname", "chestnut43"); + env_set("defaultdisplay", "lcd43"); + env_set("expansionname", "chestnut43"); break; case GUMSTIX_PINTO: printf("Recognized Pinto expansion board (rev %d %s)\n", @@ -225,8 +225,8 @@ int misc_init_r(void) expansion_config.revision, expansion_config.fab_revision); MUX_GUMSTIX(); - setenv("defaultdisplay", "lcd43"); - setenv("expansionname", "gallop43"); + env_set("defaultdisplay", "lcd43"); + env_set("expansionname", "gallop43"); break; case GUMSTIX_ALTO35: printf("Recognized Alto35 expansion board (rev %d %s)\n", @@ -234,8 +234,8 @@ int misc_init_r(void) expansion_config.fab_revision); MUX_GUMSTIX(); MUX_ALTO35(); - setenv("defaultdisplay", "lcd35"); - setenv("expansionname", "alto35"); + env_set("defaultdisplay", "lcd35"); + env_set("expansionname", "alto35"); break; case GUMSTIX_STAGECOACH: printf("Recognized Stagecoach expansion board (rev %d %s)\n", @@ -261,8 +261,8 @@ int misc_init_r(void) expansion_config.fab_revision); MUX_GUMSTIX(); MUX_ARBOR43C(); - setenv("defaultdisplay", "lcd43"); - setenv("expansionname", "arbor43c"); + env_set("defaultdisplay", "lcd43"); + env_set("expansionname", "arbor43c"); break; case ETTUS_USRP_E: printf("Recognized Ettus Research USRP-E (rev %d %s)\n", @@ -270,13 +270,13 @@ int misc_init_r(void) expansion_config.fab_revision); MUX_GUMSTIX(); MUX_USRP_E(); - setenv("defaultdisplay", "dvi"); + env_set("defaultdisplay", "dvi"); break; case GUMSTIX_NO_EEPROM: case GUMSTIX_EMPTY_EEPROM: puts("No or empty EEPROM on expansion board\n"); MUX_GUMSTIX(); - setenv("expansionname", "tobi"); + env_set("expansionname", "tobi"); break; default: printf("Unrecognized expansion board 0x%08x\n", expansion_id); @@ -284,14 +284,14 @@ int misc_init_r(void) } if (expansion_config.content == 1) - setenv(expansion_config.env_var, expansion_config.env_setting); + env_set(expansion_config.env_var, expansion_config.env_setting); omap_die_id_display(); if (get_cpu_family() == CPU_OMAP34XX) - setenv("boardname", "overo"); + env_set("boardname", "overo"); else - setenv("boardname", "overo-storm"); + env_set("boardname", "overo-storm"); return 0; } diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 4f3853ac42..52ad5b64de 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -216,7 +216,7 @@ int board_eth_init(bd_t *bis) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { printf("<ethaddr> not set. Reading from E-fuse\n"); /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); @@ -229,7 +229,7 @@ int board_eth_init(bd_t *bis) mac_addr[5] = (mac_lo & 0xFF00) >> 8; if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); else goto try_usbether; } diff --git a/board/phytec/pfla02/Kconfig b/board/phytec/pfla02/Kconfig new file mode 100644 index 0000000000..142a1222fc --- /dev/null +++ b/board/phytec/pfla02/Kconfig @@ -0,0 +1,12 @@ +if TARGET_PFLA02 + +config SYS_BOARD + default "pfla02" + +config SYS_VENDOR + default "phytec" + +config SYS_CONFIG_NAME + default "pfla02" + +endif diff --git a/board/phytec/pfla02/MAINTAINERS b/board/phytec/pfla02/MAINTAINERS new file mode 100644 index 0000000000..4b069a90cd --- /dev/null +++ b/board/phytec/pfla02/MAINTAINERS @@ -0,0 +1,6 @@ +PHYTEC PHYFLEX +M: Stefano Babic <sbabic@denx.de> +S: Maintained +F: board/phytec/pfla02/ +F: include/configs/pfla02.h +F: configs/pfla02_defconfig diff --git a/board/phytec/pfla02/Makefile b/board/phytec/pfla02/Makefile new file mode 100644 index 0000000000..25af9a01e1 --- /dev/null +++ b/board/phytec/pfla02/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2011 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := pfla02.o diff --git a/board/phytec/pfla02/README b/board/phytec/pfla02/README new file mode 100644 index 0000000000..0f46ab8623 --- /dev/null +++ b/board/phytec/pfla02/README @@ -0,0 +1,24 @@ +Board information +----------------- + +The evaluation board "pbab01" is thought to be used +together with the SOM. + +More information on the board can be found on manufacturer's +website: + +http://www.phytec.de/produkt/system-on-modules/phyflex-imx-6/ + +Building U-Boot +------------------------------- + +$ make pfla02_defconfig +$ make + +This generates the artifacts SPL and u-boot.img. +The SOM can boot from NAND or from SD-Card, having the SPI-NOR +as second option. +The dip switch "SW3" on the board let choose the boot device. + +SW3_1(on), SW3_2(on), SW3_3(off): Boot first from SD, then try SPI +SW3_1(off), SW3_2(on), SW3_3(off): Boot from SPI diff --git a/board/phytec/pfla02/pfla02.c b/board/phytec/pfla02/pfla02.c new file mode 100644 index 0000000000..8d2ce63e06 --- /dev/null +++ b/board/phytec/pfla02/pfla02.c @@ -0,0 +1,698 @@ +/* + * Copyright (C) 2017 Stefano Babic <sbabic@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/mach-imx/spi.h> +#include <linux/errno.h> +#include <asm/gpio.h> +#include <mmc.h> +#include <i2c.h> +#include <fsl_esdhc.h> +#include <nand.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/sys_proto.h> +#include <asm/sections.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) + +#define ASRC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define NAND_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 14) +#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) +#define GREEN_LED IMX_GPIO_NR(2, 31) +#define RED_LED IMX_GPIO_NR(1, 30) +#define IMX6Q_DRIVE_STRENGTH 0x30 + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + return 0; +} + +static iomux_v3_cfg_t const uart4_pads[] = { + IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + +static iomux_v3_cfg_t const enet_pads[] = { + IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | + MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | + MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | + MUX_PAD_CTRL(ENET_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; + +static iomux_v3_cfg_t const ecspi3_pads[] = { + IOMUX_PADS(PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), + IOMUX_PADS(PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)), + IOMUX_PADS(PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)), + IOMUX_PADS(PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; + +static iomux_v3_cfg_t const gpios_pads[] = { + IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT4__GPIO2_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT6__GPIO2_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_EB3__GPIO2_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; + +#ifdef CONFIG_CMD_NAND +/* NAND */ +static iomux_v3_cfg_t const nfc_pads[] = { + IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_CS1__NAND_CE1_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_CS2__NAND_CE2_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_CS3__NAND_CE3_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL)), + IOMUX_PADS(PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NAND_PAD_CTRL)), +}; +#endif + +static struct i2c_pads_info i2c_pad_info = { + .scl = { + .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | I2C_PAD, + .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | I2C_PAD, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | I2C_PAD, + .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | I2C_PAD, + .gp = IMX_GPIO_NR(3, 28) + } +}; + +static struct fsl_esdhc_cfg usdhc_cfg[] = { + {USDHC3_BASE_ADDR, + .max_bus_width = 4}, + {.esdhc_base = USDHC2_BASE_ADDR, + .max_bus_width = 4}, +}; + +#if !defined(CONFIG_SPL_BUILD) +static iomux_v3_cfg_t const usdhc2_pads[] = { + IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), + IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; +#endif + +static iomux_v3_cfg_t const usdhc3_pads[] = { + IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), + IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), +}; + +int board_mmc_get_env_dev(int devno) +{ + return devno - 1; +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + ret = 1; + break; + case USDHC3_BASE_ADDR: + ret = 1; + break; + } + + return ret; +} + +#ifndef CONFIG_SPL_BUILD +int board_mmc_init(bd_t *bis) +{ + int ret; + int i; + + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + SETUP_IOMUX_PADS(usdhc3_pads); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + case 1: + SETUP_IOMUX_PADS(usdhc2_pads); + gpio_direction_input(USDHC2_CD_GPIO); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + i + 1, CONFIG_SYS_FSL_USDHC_NUM); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) + return ret; + } + + return 0; +} +#endif + +static void setup_iomux_uart(void) +{ + SETUP_IOMUX_PADS(uart4_pads); +} + +static void setup_iomux_enet(void) +{ + SETUP_IOMUX_PADS(enet_pads); + + gpio_direction_output(ENET_PHY_RESET_GPIO, 0); + mdelay(10); + gpio_set_value(ENET_PHY_RESET_GPIO, 1); + mdelay(30); +} + +static void setup_spi(void) +{ + gpio_request(IMX_GPIO_NR(4, 24), "spi_cs0"); + gpio_direction_output(IMX_GPIO_NR(4, 24), 1); + + SETUP_IOMUX_PADS(ecspi3_pads); + + enable_spi_clk(true, 2); +} + +static void setup_gpios(void) +{ + SETUP_IOMUX_PADS(gpios_pads); +} + +#ifdef CONFIG_CMD_NAND +static void setup_gpmi_nand(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* config gpmi nand iomux */ + SETUP_IOMUX_PADS(nfc_pads); + + /* gate ENFC_CLK_ROOT clock first,before clk source switch */ + clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); + + /* config gpmi and bch clock to 100 MHz */ + clrsetbits_le32(&mxc_ccm->cs2cdr, + MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, + MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | + MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) | + MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)); + + /* enable ENFC_CLK_ROOT clock */ + setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK); + + /* enable gpmi and bch clock gating */ + setbits_le32(&mxc_ccm->CCGR4, + MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET); + + /* enable apbh clock gating */ + setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); +} +#endif + +/* + * Board revision is coded in 4 GPIOs + */ +u32 get_board_rev(void) +{ + u32 rev; + int i; + + for (i = 0, rev = 0; i < 4; i++) + rev |= (gpio_get_value(IMX_GPIO_NR(2, 12 + i)) << i); + + return 16 - rev; +} + +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + if (bus != 2 || (cs != 0)) + return -EINVAL; + + return IMX_GPIO_NR(4, 24); +} + +int board_eth_init(bd_t *bis) +{ + setup_iomux_enet(); + + return cpu_eth_init(bis); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_SYS_I2C_MXC + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info); +#endif + +#ifdef CONFIG_MXC_SPI + setup_spi(); +#endif + + setup_gpios(); + +#ifdef CONFIG_CMD_NAND + setup_gpmi_nand(); +#endif + return 0; +} + + +#ifdef CONFIG_CMD_BMODE +/* + * BOOT_CFG1, BOOT_CFG2, BOOT_CFG3, BOOT_CFG4 + * see Table 8-11 and Table 5-9 + * BOOT_CFG1[7] = 1 (boot from NAND) + * BOOT_CFG1[5] = 0 - raw NAND + * BOOT_CFG1[4] = 0 - default pad settings + * BOOT_CFG1[3:2] = 00 - devices = 1 + * BOOT_CFG1[1:0] = 00 - Row Address Cycles = 3 + * BOOT_CFG2[4:3] = 00 - Boot Search Count = 2 + * BOOT_CFG2[2:1] = 01 - Pages In Block = 64 + * BOOT_CFG2[0] = 0 - Reset time 12ms + */ +static const struct boot_mode board_boot_modes[] = { + /* NAND: 64pages per block, 3 row addr cycles, 2 copies of FCB/DBBT */ + {"nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00)}, + {"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int board_late_init(void) +{ + char buf[10]; +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + + snprintf(buf, sizeof(buf), "%d", get_board_rev()); + env_set("board_rev", buf); + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +#include <asm/arch/mx6-ddr.h> +#include <spl.h> +#include <libfdt.h> + +#define MX6_PHYFLEX_ERR006282 IMX_GPIO_NR(2, 11) +static void phyflex_err006282_workaround(void) +{ + /* + * Boards beginning with 1362.2 have the SD4_DAT3 pin connected + * to the CMIC. If this pin isn't toggled within 10s the boards + * reset. The pin is unconnected on older boards, so we do not + * need a check for older boards before applying this fixup. + */ + + gpio_direction_output(MX6_PHYFLEX_ERR006282, 0); + mdelay(2); + gpio_direction_output(MX6_PHYFLEX_ERR006282, 1); + mdelay(2); + gpio_set_value(MX6_PHYFLEX_ERR006282, 0); + + gpio_direction_input(MX6_PHYFLEX_ERR006282); +} + +static const struct mx6dq_iomux_ddr_regs mx6_ddr_ioregs = { + .dram_sdclk_0 = 0x00000030, + .dram_sdclk_1 = 0x00000030, + .dram_cas = 0x00000030, + .dram_ras = 0x00000030, + .dram_reset = 0x00000030, + .dram_sdcke0 = 0x00003000, + .dram_sdcke1 = 0x00003000, + .dram_sdba2 = 0x00000030, + .dram_sdodt0 = 0x00000030, + .dram_sdodt1 = 0x00000030, + + .dram_sdqs0 = 0x00000028, + .dram_sdqs1 = 0x00000028, + .dram_sdqs2 = 0x00000028, + .dram_sdqs3 = 0x00000028, + .dram_sdqs4 = 0x00000028, + .dram_sdqs5 = 0x00000028, + .dram_sdqs6 = 0x00000028, + .dram_sdqs7 = 0x00000028, + .dram_dqm0 = 0x00000028, + .dram_dqm1 = 0x00000028, + .dram_dqm2 = 0x00000028, + .dram_dqm3 = 0x00000028, + .dram_dqm4 = 0x00000028, + .dram_dqm5 = 0x00000028, + .dram_dqm6 = 0x00000028, + .dram_dqm7 = 0x00000028, +}; + +static const struct mx6dq_iomux_grp_regs mx6_grp_ioregs = { + .grp_ddr_type = 0x000C0000, + .grp_ddrmode_ctl = 0x00020000, + .grp_ddrpke = 0x00000000, + .grp_addds = IMX6Q_DRIVE_STRENGTH, + .grp_ctlds = IMX6Q_DRIVE_STRENGTH, + .grp_ddrmode = 0x00020000, + .grp_b0ds = 0x00000028, + .grp_b1ds = 0x00000028, + .grp_b2ds = 0x00000028, + .grp_b3ds = 0x00000028, + .grp_b4ds = 0x00000028, + .grp_b5ds = 0x00000028, + .grp_b6ds = 0x00000028, + .grp_b7ds = 0x00000028, +}; + +static const struct mx6_mmdc_calibration mx6_mmcd_calib = { + .p0_mpwldectrl0 = 0x00110011, + .p0_mpwldectrl1 = 0x00240024, + .p1_mpwldectrl0 = 0x00260038, + .p1_mpwldectrl1 = 0x002C0038, + .p0_mpdgctrl0 = 0x03400350, + .p0_mpdgctrl1 = 0x03440340, + .p1_mpdgctrl0 = 0x034C0354, + .p1_mpdgctrl1 = 0x035C033C, + .p0_mprddlctl = 0x322A2A2A, + .p1_mprddlctl = 0x302C2834, + .p0_mpwrdlctl = 0x34303834, + .p1_mpwrdlctl = 0x422A3E36, +}; + +/* Index in RAM Chip array */ +enum { + RAM_1GB, + RAM_2GB, + RAM_4GB +}; + +static struct mx6_ddr3_cfg mt41k_xx[] = { +/* MT41K64M16JT-125 (1Gb density) */ + { + .mem_speed = 1600, + .density = 1, + .width = 16, + .banks = 8, + .rowaddr = 13, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, + .SRT = 1, + }, + +/* MT41K256M16JT-125 (2Gb density) */ + { + .mem_speed = 1600, + .density = 2, + .width = 16, + .banks = 8, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, + .SRT = 1, + }, + +/* MT41K256M16JT-125 (4Gb density) */ + { + .mem_speed = 1600, + .density = 4, + .width = 16, + .banks = 8, + .rowaddr = 15, + .coladdr = 10, + .pagesz = 2, + .trcd = 1375, + .trcmin = 4875, + .trasmin = 3500, + .SRT = 1, + } +}; + +static void ccgr_init(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + writel(0x00C03F3F, &ccm->CCGR0); + writel(0x0030FC03, &ccm->CCGR1); + writel(0x0FFFC000, &ccm->CCGR2); + writel(0x3FF00000, &ccm->CCGR3); + writel(0x00FFF300, &ccm->CCGR4); + writel(0x0F0000C3, &ccm->CCGR5); + writel(0x000003FF, &ccm->CCGR6); +} + +static void gpr_init(void) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + /* enable AXI cache for VDOA/VPU/IPU */ + writel(0xF00000CF, &iomux->gpr[4]); + /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ + writel(0x007F007F, &iomux->gpr[6]); + writel(0x007F007F, &iomux->gpr[7]); +} + +static void spl_dram_init(struct mx6_ddr3_cfg *mem_ddr) +{ + struct mx6_ddr_sysinfo sysinfo = { + /* width of data bus:0=16,1=32,2=64 */ + .dsize = 2, + /* config for full 4GB range so that get_mem_size() works */ + .cs_density = 32, /* 32Gb per CS */ + /* single chip select */ + .ncs = 2, + .cs1_mirror = 0, + .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */ + .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */ + .walat = 1, /* Write additional latency */ + .ralat = 5, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ + .ddr_type = DDR_TYPE_DDR3, + .refsel = 1, /* Refresh cycles at 32KHz */ + .refr = 7, /* 8 refresh commands per refresh cycle */ + }; + + mx6dq_dram_iocfg(64, &mx6_ddr_ioregs, &mx6_grp_ioregs); + mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, mem_ddr); +} + +int board_mmc_init(bd_t *bis) +{ + if (spl_boot_device() == BOOT_DEVICE_SPI) + printf("MMC SEtup, Boot SPI"); + + SETUP_IOMUX_PADS(usdhc3_pads); + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + + +void board_boot_order(u32 *spl_boot_list) +{ + spl_boot_list[0] = spl_boot_device(); + printf("Boot device %x\n", spl_boot_list[0]); + switch (spl_boot_list[0]) { + case BOOT_DEVICE_SPI: + spl_boot_list[1] = BOOT_DEVICE_UART; + break; + case BOOT_DEVICE_MMC1: + spl_boot_list[1] = BOOT_DEVICE_SPI; + spl_boot_list[2] = BOOT_DEVICE_UART; + break; + default: + printf("Boot device %x\n", spl_boot_list[0]); + } +} + +/* + * This is used because get_ram_size() does not + * take care of cache, resulting a wrong size + * pfla02 has just 1, 2 or 4 GB option + * Function checks for mirrors in the first CS + */ +#define RAM_TEST_PATTERN 0xaa5555aa +static unsigned int pfla02_detect_ramsize(void) +{ + u32 *p, *p1; + unsigned int offset = 512 * 1024 * 1024; + int i; + + for (i = 0; i < 2; i++) { + p = (u32 *)PHYS_SDRAM; + p1 = (u32 *)(PHYS_SDRAM + (i + 1) * offset); + + *p1 = 0; + *p = RAM_TEST_PATTERN; + + /* + * This is required to detect mirroring + * else we read back values from cache + */ + flush_dcache_all(); + + if (*p == *p1) + return i; + } + return RAM_4GB; +} + +void board_init_f(ulong dummy) +{ + unsigned int ramchip; +#ifdef CONFIG_CMD_NAND + /* Enable NAND */ + setup_gpmi_nand(); +#endif + + /* setup clock gating */ + ccgr_init(); + + /* setup AIPS and disable watchdog */ + arch_cpu_init(); + + /* setup AXI */ + gpr_init(); + + board_early_init_f(); + + /* setup GP timer */ + timer_init(); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + setup_spi(); + + setup_gpios(); + + /* DDR initialization */ + spl_dram_init(&mt41k_xx[RAM_4GB]); + ramchip = pfla02_detect_ramsize(); + if (ramchip != RAM_4GB) + spl_dram_init(&mt41k_xx[ramchip]); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + phyflex_err006282_workaround(); + + /* load/boot image from boot device */ + board_init_r(NULL, 0); +} +#endif diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c b/board/qualcomm/dragonboard410c/dragonboard410c.c index 37d0b85e0e..848e27848b 100644 --- a/board/qualcomm/dragonboard410c/dragonboard410c.c +++ b/board/qualcomm/dragonboard410c/dragonboard410c.c @@ -128,7 +128,7 @@ int misc_init_r(void) } if (dm_gpio_get_value(&resin)) { - setenv("bootdelay", "-1"); + env_set("bootdelay", "-1"); printf("Power button pressed - dropping to console.\n"); } diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index d3c6ba580f..530f149617 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -247,11 +247,11 @@ static void set_fdtfile(void) { const char *fdtfile; - if (getenv("fdtfile")) + if (env_get("fdtfile")) return; fdtfile = model->fdtfile; - setenv("fdtfile", fdtfile); + env_set("fdtfile", fdtfile); } /* @@ -260,13 +260,13 @@ static void set_fdtfile(void) */ static void set_fdt_addr(void) { - if (getenv("fdt_addr")) + if (env_get("fdt_addr")) return; if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC) return; - setenv_hex("fdt_addr", fw_dtb_pointer); + env_set_hex("fdt_addr", fw_dtb_pointer); } /* @@ -287,7 +287,7 @@ static void set_usbethaddr(void) if (!model->has_onboard_eth) return; - if (getenv("usbethaddr")) + if (env_get("usbethaddr")) return; BCM2835_MBOX_INIT_HDR(msg); @@ -300,10 +300,10 @@ static void set_usbethaddr(void) return; } - eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac); + eth_env_set_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac); - if (!getenv("ethaddr")) - setenv("ethaddr", getenv("usbethaddr")); + if (!env_get("ethaddr")) + env_set("ethaddr", env_get("usbethaddr")); return; } @@ -314,13 +314,13 @@ static void set_board_info(void) char s[11]; snprintf(s, sizeof(s), "0x%X", revision); - setenv("board_revision", s); + env_set("board_revision", s); snprintf(s, sizeof(s), "%d", rev_scheme); - setenv("board_rev_scheme", s); + env_set("board_rev_scheme", s); /* Can't rename this to board_rev_type since it's an ABI for scripts */ snprintf(s, sizeof(s), "0x%X", rev_type); - setenv("board_rev", s); - setenv("board_name", model->name); + env_set("board_rev", s); + env_set("board_name", model->name); } #endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */ @@ -330,7 +330,7 @@ static void set_serial_number(void) int ret; char serial_string[17] = { 0 }; - if (getenv("serial#")) + if (env_get("serial#")) return; BCM2835_MBOX_INIT_HDR(msg); @@ -345,7 +345,7 @@ static void set_serial_number(void) snprintf(serial_string, sizeof(serial_string), "%016" PRIx64, msg->get_board_serial.body.resp.serial); - setenv("serial#", serial_string); + env_set("serial#", serial_string); } int misc_init_r(void) diff --git a/board/renesas/alt/alt.c b/board/renesas/alt/alt.c index b35b6a3ad1..0bf8160f1f 100644 --- a/board/renesas/alt/alt.c +++ b/board/renesas/alt/alt.c @@ -143,7 +143,7 @@ int board_eth_init(bd_t *bis) unsigned char enetaddr[6]; ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/renesas/blanche/blanche.c b/board/renesas/blanche/blanche.c index 5156eafeb4..574dcda01b 100644 --- a/board/renesas/blanche/blanche.c +++ b/board/renesas/blanche/blanche.c @@ -418,10 +418,10 @@ int board_eth_init(bd_t *bis) rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + if (!eth_env_get_enetaddr(STR_ENV_ETHADDR, eth_addr)) { dev = eth_get_dev_by_index(0); if (dev) { - eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + eth_env_set_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); } else { printf("blanche: Couldn't get eth device\n"); rc = -1; diff --git a/board/renesas/ecovec/ecovec.c b/board/renesas/ecovec/ecovec.c index 28b557a5b0..e4bb440d24 100644 --- a/board/renesas/ecovec/ecovec.c +++ b/board/renesas/ecovec/ecovec.c @@ -55,7 +55,7 @@ int board_late_init(void) /* Set MAC address */ sprintf(env_mac, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); - setenv("ethaddr", env_mac); + env_set("ethaddr", env_mac); debug_led(0x0F); diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c index 359f95e264..54e126985b 100644 --- a/board/renesas/gose/gose.c +++ b/board/renesas/gose/gose.c @@ -126,7 +126,7 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_SH_ETHER ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c index dd62145ac9..8fa648e40a 100644 --- a/board/renesas/koelsch/koelsch.c +++ b/board/renesas/koelsch/koelsch.c @@ -131,7 +131,7 @@ int board_eth_init(bd_t *bis) unsigned char enetaddr[6]; ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index 2ada816006..562be04760 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -136,7 +136,7 @@ int board_eth_init(bd_t *bis) unsigned char enetaddr[6]; ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/renesas/porter/porter.c b/board/renesas/porter/porter.c index 926a657511..5b1a167906 100644 --- a/board/renesas/porter/porter.c +++ b/board/renesas/porter/porter.c @@ -126,7 +126,7 @@ int board_eth_init(bd_t *bis) unsigned char enetaddr[6]; ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/renesas/sh7752evb/sh7752evb.c b/board/renesas/sh7752evb/sh7752evb.c index 525d979724..4a76fb73ee 100644 --- a/board/renesas/sh7752evb/sh7752evb.c +++ b/board/renesas/sh7752evb/sh7752evb.c @@ -221,10 +221,10 @@ static void init_ethernet_mac(void) for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) { get_sh_eth_mac(i, mac_string, buf); if (i == 0) - setenv("ethaddr", mac_string); + env_set("ethaddr", mac_string); else { sprintf(env_string, "eth%daddr", i); - setenv(env_string, mac_string); + env_set(env_string, mac_string); } set_mac_to_sh_giga_eth_register(i, mac_string); } diff --git a/board/renesas/sh7753evb/sh7753evb.c b/board/renesas/sh7753evb/sh7753evb.c index 3d1eedaa5f..ca9e144743 100644 --- a/board/renesas/sh7753evb/sh7753evb.c +++ b/board/renesas/sh7753evb/sh7753evb.c @@ -237,10 +237,10 @@ static void init_ethernet_mac(void) for (i = 0; i < SH7753EVB_ETHERNET_NUM_CH; i++) { get_sh_eth_mac(i, mac_string, buf); if (i == 0) - setenv("ethaddr", mac_string); + env_set("ethaddr", mac_string); else { sprintf(env_string, "eth%daddr", i); - setenv(env_string, mac_string); + env_set(env_string, mac_string); } set_mac_to_sh_giga_eth_register(i, mac_string); } diff --git a/board/renesas/sh7757lcr/sh7757lcr.c b/board/renesas/sh7757lcr/sh7757lcr.c index 0a04a9d39d..3f970fc401 100644 --- a/board/renesas/sh7757lcr/sh7757lcr.c +++ b/board/renesas/sh7757lcr/sh7757lcr.c @@ -278,10 +278,10 @@ static void init_ethernet_mac(void) for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) { get_sh_eth_mac(i, mac_string, buf); if (i == 0) - setenv("ethaddr", mac_string); + env_set("ethaddr", mac_string); else { sprintf(env_string, "eth%daddr", i); - setenv(env_string, mac_string); + env_set(env_string, mac_string); } set_mac_to_sh_eth_register(i, mac_string); @@ -291,7 +291,7 @@ static void init_ethernet_mac(void) for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) { get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf); sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH); - setenv(env_string, mac_string); + env_set(env_string, mac_string); set_mac_to_sh_giga_eth_register(i, mac_string); } diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c index e13a38f5ea..a8de402d20 100644 --- a/board/renesas/silk/silk.c +++ b/board/renesas/silk/silk.c @@ -135,7 +135,7 @@ int board_eth_init(bd_t *bis) unsigned char enetaddr[6]; ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/renesas/stout/stout.c b/board/renesas/stout/stout.c index fe8dd3d952..d681148273 100644 --- a/board/renesas/stout/stout.c +++ b/board/renesas/stout/stout.c @@ -137,7 +137,7 @@ int board_eth_init(bd_t *bis) unsigned char enetaddr[6]; ret = sh_eth_initialize(bis); - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return ret; /* Set Mac address */ diff --git a/board/rockchip/evb_px5/evb-px5.c b/board/rockchip/evb_px5/evb-px5.c index 6dca1fc74b..6a47642b57 100644 --- a/board/rockchip/evb_px5/evb-px5.c +++ b/board/rockchip/evb_px5/evb-px5.c @@ -4,30 +4,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <asm/io.h> -#include <fdtdec.h> -#include <asm/arch/clock.h> -#include <asm/arch/grf_rk3368.h> - -DECLARE_GLOBAL_DATA_PTR; - -int mach_cpu_init(void) -{ - struct rk3368_pmu_grf *pmugrf; - int node; - - node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "rockchip,rk3368-pmugrf"); - pmugrf = (struct rk3368_pmu_grf *)fdtdec_get_addr(gd->fdt_blob, node, "reg"); - - rk_clrsetreg(&pmugrf->gpio0d_iomux, - GPIO0D0_MASK | GPIO0D1_MASK | - GPIO0D2_MASK | GPIO0D3_MASK, - GPIO0D0_GPIO << GPIO0D0_SHIFT | - GPIO0D1_GPIO << GPIO0D1_SHIFT | - GPIO0D2_UART4_SOUT << GPIO0D2_SHIFT | - GPIO0D3_UART4_SIN << GPIO0D3_SHIFT); - return 0; -} int board_init(void) { diff --git a/board/rockchip/kylin_rk3036/kylin_rk3036.c b/board/rockchip/kylin_rk3036/kylin_rk3036.c index 7e2edf4a56..9134994874 100644 --- a/board/rockchip/kylin_rk3036/kylin_rk3036.c +++ b/board/rockchip/kylin_rk3036/kylin_rk3036.c @@ -44,7 +44,7 @@ int rk_board_late_init(void) { if (fastboot_key_pressed()) { printf("enter fastboot!\n"); - setenv("preboot", "setenv preboot; fastboot usb0"); + env_set("preboot", "setenv preboot; fastboot usb0"); } return 0; diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c index c2872e7330..790a921515 100644 --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c @@ -29,7 +29,7 @@ int rk_board_late_init(void) return 0; if (is_valid_ethaddr(ethaddr)) - eth_setenv_enetaddr("ethaddr", ethaddr); + eth_env_set_enetaddr("ethaddr", ethaddr); return 0; } diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c index 44f412db5d..ae2a6e6bfa 100644 --- a/board/samsung/common/exynos5-dt.c +++ b/board/samsung/common/exynos5-dt.c @@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char *devstr) if (board_is_odroidxu4()) return info; - return getenv("dfu_alt_system"); + return env_get("dfu_alt_system"); } char *get_dfu_alt_boot(char *interface, char *devstr) diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index b18eed2fac..4157349d02 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -51,7 +51,7 @@ void set_dfu_alt_info(char *interface, char *devstr) alt_setting = get_dfu_alt_boot(interface, devstr); if (alt_setting) { - setenv("dfu_alt_boot", alt_setting); + env_set("dfu_alt_boot", alt_setting); offset = snprintf(buf, buf_size, "%s", alt_setting); } @@ -71,7 +71,7 @@ void set_dfu_alt_info(char *interface, char *devstr) status = "done\n"; } - setenv("dfu_alt_info", alt_info); + env_set("dfu_alt_info", alt_info); puts(status); } #endif @@ -83,14 +83,14 @@ void set_board_info(void) snprintf(info, ARRAY_SIZE(info), "%u.%u", (s5p_cpu_rev & 0xf0) >> 4, s5p_cpu_rev & 0xf); - setenv("soc_rev", info); + env_set("soc_rev", info); snprintf(info, ARRAY_SIZE(info), "%x", s5p_cpu_id); - setenv("soc_id", info); + env_set("soc_id", info); #ifdef CONFIG_REVISION_TAG snprintf(info, ARRAY_SIZE(info), "%x", get_board_rev()); - setenv("board_rev", info); + env_set("board_rev", info); #endif #ifdef CONFIG_OF_LIBFDT const char *bdtype = ""; @@ -102,11 +102,11 @@ void set_board_info(void) bdtype = ""; sprintf(info, "%s%s", bdname, bdtype); - setenv("boardname", info); + env_set("boardname", info); #endif snprintf(info, ARRAY_SIZE(info), "%s%x-%s%s.dtb", CONFIG_SYS_SOC, s5p_cpu_id, bdname, bdtype); - setenv("fdtfile", info); + env_set("fdtfile", info); #endif } #endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */ diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index b4cb33240e..e40a2f6e3a 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -66,7 +66,7 @@ const char *get_board_type(void) #ifdef CONFIG_SET_DFU_ALT_INFO char *get_dfu_alt_system(char *interface, char *devstr) { - return getenv("dfu_alt_system"); + return env_get("dfu_alt_system"); } char *get_dfu_alt_boot(char *interface, char *devstr) diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 00059a1317..f0913383b9 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -469,7 +469,7 @@ void exynos_lcd_misc_init(vidinfo_t *vid) #endif #ifdef CONFIG_S6E8AX0 s6e8ax0_init(); - setenv("lcdinfo", "lcd=s6e8ax0"); + env_set("lcdinfo", "lcd=s6e8ax0"); #endif } #endif diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index cc6eaf7ad0..549ac8b48a 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -397,6 +397,6 @@ void exynos_lcd_misc_init(vidinfo_t *vid) vid->pclk_name = 1; /* MPLL */ vid->sclk_div = 1; - setenv("lcdinfo", "lcd=ld9040"); + env_set("lcdinfo", "lcd=ld9040"); } #endif diff --git a/board/samtec/vining_2000/vining_2000.c b/board/samtec/vining_2000/vining_2000.c index 5c8b436776..af1a3e75cb 100644 --- a/board/samtec/vining_2000/vining_2000.c +++ b/board/samtec/vining_2000/vining_2000.c @@ -131,8 +131,8 @@ int board_eth_init(bd_t *bis) /* just to get secound mac address */ imx_get_mac_from_fuse(1, eth1addr); - if (!getenv("eth1addr") && is_valid_ethaddr(eth1addr)) - eth_setenv_enetaddr("eth1addr", eth1addr); + if (!env_get("eth1addr") && is_valid_ethaddr(eth1addr)) + eth_env_set_enetaddr("eth1addr", eth1addr); imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); @@ -413,11 +413,11 @@ static int set_pin_state(void) return ret; if (val >= VAL_UPPER) - setenv("pin_state", "connected"); + env_set("pin_state", "connected"); else if (val < VAL_UPPER && val > VAL_LOWER) - setenv("pin_state", "open"); + env_set("pin_state", "open"); else - setenv("pin_state", "button"); + env_set("pin_state", "button"); return ret; } diff --git a/board/samtec/vining_fpga/socfpga.c b/board/samtec/vining_fpga/socfpga.c index f888ecbbc1..229b12f308 100644 --- a/board/samtec/vining_fpga/socfpga.c +++ b/board/samtec/vining_fpga/socfpga.c @@ -69,31 +69,31 @@ int misc_init_r(void) /* Check EEPROM signature. */ if (!(data[0] == 0xa5 && data[1] == 0x5a)) { puts("Invalid I2C EEPROM signature.\n"); - setenv("unit_serial", "invalid"); - setenv("unit_ident", "VINing-xxxx-STD"); - setenv("hostname", "vining-invalid"); + env_set("unit_serial", "invalid"); + env_set("unit_ident", "VINing-xxxx-STD"); + env_set("hostname", "vining-invalid"); return 0; } /* If 'unit_serial' is already set, do nothing. */ - if (!getenv("unit_serial")) { + if (!env_get("unit_serial")) { /* This field is Big Endian ! */ serial = (data[0x54] << 24) | (data[0x55] << 16) | (data[0x56] << 8) | (data[0x57] << 0); memset(str, 0, sizeof(str)); sprintf(str, "%07i", serial); - setenv("unit_serial", str); + env_set("unit_serial", str); } - if (!getenv("unit_ident")) { + if (!env_get("unit_ident")) { memset(str, 0, sizeof(str)); memcpy(str, &data[0x2e], 18); - setenv("unit_ident", str); + env_set("unit_ident", str); } /* Set ethernet address from EEPROM. */ - if (!getenv("ethaddr") && is_valid_ethaddr(&data[0x62])) - eth_setenv_enetaddr("ethaddr", &data[0x62]); + if (!env_get("ethaddr") && is_valid_ethaddr(&data[0x62])) + eth_env_set_enetaddr("ethaddr", &data[0x62]); return 0; } diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index b967227411..65fa6af2d4 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -121,7 +121,7 @@ unsigned char get_button_state(char * const envname, unsigned char def) char *ptr_env; /* If button is not found we take default */ - ptr_env = getenv(envname); + ptr_env = env_get(envname); if (NULL == ptr_env) { gpio = def; } else { @@ -199,7 +199,7 @@ void set_env_gpios(unsigned char state) strcat(str_tmp, num); /* If env var is not found we stop */ - ptr_env = getenv(str_tmp); + ptr_env = env_get(str_tmp); if (NULL == ptr_env) break; diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c index 6c869ed2b0..b4f027af28 100644 --- a/board/siemens/common/factoryset.c +++ b/board/siemens/common/factoryset.c @@ -266,7 +266,7 @@ err: static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; -static int factoryset_mac_setenv(void) +static int factoryset_mac_env_set(void) { uint8_t mac_addr[6]; @@ -292,15 +292,15 @@ static int factoryset_mac_setenv(void) } } - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); return 0; } -int factoryset_setenv(void) +int factoryset_env_set(void) { int ret = 0; - if (factoryset_mac_setenv() < 0) + if (factoryset_mac_env_set() < 0) ret = -1; return ret; diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h index 3f23d5ebf4..8602627d2e 100644 --- a/board/siemens/common/factoryset.h +++ b/board/siemens/common/factoryset.h @@ -25,7 +25,7 @@ struct factorysetcontainer { }; int factoryset_read_eeprom(int i2c_addr); -int factoryset_setenv(void); +int factoryset_env_set(void); extern struct factorysetcontainer factory_dat; #endif /* __FACTORYSET_H */ diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index d8869a09dd..c705b5ab0f 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -272,13 +272,13 @@ int board_late_init(void) #ifdef CONFIG_FACTORYSET /* Set ASN in environment*/ if (factory_dat.asn[0] != 0) { - setenv("dtb_name", (char *)factory_dat.asn); + env_set("dtb_name", (char *)factory_dat.asn); } else { /* dtb suffix gets added in load script */ - setenv("dtb_name", "am335x-draco"); + env_set("dtb_name", "am335x-draco"); } #else - setenv("dtb_name", "am335x-draco"); + env_set("dtb_name", "am335x-draco"); #endif return 0; @@ -330,7 +330,7 @@ int board_eth_init(bd_t *bis) int n = 0; int rv; - factoryset_setenv(); + factoryset_env_set(); /* Set rgmii mode and enable rmii clock to be sourced from chip */ writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel); diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 750f338897..8bbb03561b 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -225,7 +225,7 @@ int board_eth_init(bd_t *bis) if (!is_valid_ethaddr(factory_dat.mac)) printf("Error: no valid mac address\n"); else - eth_setenv_enetaddr("ethaddr", factory_dat.mac); + eth_env_set_enetaddr("ethaddr", factory_dat.mac); #endif /* #ifdef CONFIG_FACTORYSET */ /* Set rgmii mode and enable rmii clock to be sourced from chip */ @@ -446,12 +446,12 @@ int board_late_init(void) factory_dat.pxm50 = 0; sprintf(tmp, "%s_%s", factory_dat.asn, factory_dat.comp_version); - ret = setenv("boardid", tmp); + ret = env_set("boardid", tmp); if (ret) printf("error setting board id\n"); } else { factory_dat.pxm50 = 1; - ret = setenv("boardid", "PXM50_1.0"); + ret = env_set("boardid", "PXM50_1.0"); if (ret) printf("error setting board id\n"); } diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index b3c666c054..2a97414baf 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -182,7 +182,7 @@ int board_eth_init(bd_t *bis) int rv; #ifndef CONFIG_SPL_BUILD - factoryset_setenv(); + factoryset_env_set(); #endif /* Set rgmii mode and enable rmii clock to be sourced from chip */ @@ -482,7 +482,7 @@ int board_late_init(void) else strcpy(tmp, "QMX7.E38_4.0"); - ret = setenv("boardid", tmp); + ret = env_set("boardid", tmp); if (ret) printf("error setting board id\n"); diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 4aa8d64869..8390bdd5f8 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -15,6 +15,7 @@ #include <command.h> #include <common.h> #include <dm.h> +#include <environment.h> #include <asm/io.h> #include <asm/arch/at91sam9260_matrix.h> #include <asm/arch/at91sam9_smc.h> @@ -376,36 +377,36 @@ static int upgrade_failure_fallback(void) char *kern_size; char *kern_size_fb; - partitionset_active = getenv("partitionset_active"); + partitionset_active = env_get("partitionset_active"); if (partitionset_active) { if (partitionset_active[0] == 'A') - setenv("partitionset_active", "B"); + env_set("partitionset_active", "B"); else - setenv("partitionset_active", "A"); + env_set("partitionset_active", "A"); } else { printf("partitionset_active missing.\n"); return -ENOENT; } - rootfs = getenv("rootfs"); - rootfs_fallback = getenv("rootfs_fallback"); - setenv("rootfs", rootfs_fallback); - setenv("rootfs_fallback", rootfs); + rootfs = env_get("rootfs"); + rootfs_fallback = env_get("rootfs_fallback"); + env_set("rootfs", rootfs_fallback); + env_set("rootfs_fallback", rootfs); - kern_size = getenv("kernel_size"); - kern_size_fb = getenv("kernel_size_fallback"); - setenv("kernel_size", kern_size_fb); - setenv("kernel_size_fallback", kern_size); + kern_size = env_get("kernel_size"); + kern_size_fb = env_get("kernel_size_fallback"); + env_set("kernel_size", kern_size_fb); + env_set("kernel_size_fallback", kern_size); - kern_off = getenv("kernel_Off"); - kern_off_fb = getenv("kernel_Off_fallback"); - setenv("kernel_Off", kern_off_fb); - setenv("kernel_Off_fallback", kern_off); + kern_off = env_get("kernel_Off"); + kern_off_fb = env_get("kernel_Off_fallback"); + env_set("kernel_Off", kern_off_fb); + env_set("kernel_Off_fallback", kern_off); - setenv("bootargs", '\0'); - setenv("upgrade_available", '\0'); - setenv("boot_retries", '\0'); - saveenv(); + env_set("bootargs", '\0'); + env_set("upgrade_available", '\0'); + env_set("boot_retries", '\0'); + env_save(); return 0; } @@ -417,14 +418,14 @@ static int do_upgrade_available(cmd_tbl_t *cmdtp, int flag, int argc, unsigned long boot_retry = 0; char boot_buf[10]; - upgrade_available = simple_strtoul(getenv("upgrade_available"), NULL, + upgrade_available = simple_strtoul(env_get("upgrade_available"), NULL, 10); if (upgrade_available) { - boot_retry = simple_strtoul(getenv("boot_retries"), NULL, 10); + boot_retry = simple_strtoul(env_get("boot_retries"), NULL, 10); boot_retry++; sprintf(boot_buf, "%lx", boot_retry); - setenv("boot_retries", boot_buf); - saveenv(); + env_set("boot_retries", boot_buf); + env_save(); /* * Here the boot_retries count is checked, and if the diff --git a/board/silica/pengwyn/board.c b/board/silica/pengwyn/board.c index 1f5a5868cb..0429e6f0c7 100644 --- a/board/silica/pengwyn/board.c +++ b/board/silica/pengwyn/board.c @@ -171,7 +171,7 @@ int board_eth_init(bd_t *bis) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { printf("<ethaddr> not set. Reading from E-fuse\n"); /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); @@ -184,7 +184,7 @@ int board_eth_init(bd_t *bis) mac_addr[5] = (mac_lo & 0xFF00) >> 8; if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); else return n; } diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index fb691c22d9..004f37009a 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -38,7 +38,7 @@ int checkboard (void) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); char buf[64]; int f; - int i = getenv_f("serial#", buf, sizeof(buf)); + int i = env_get_f("serial#", buf, sizeof(buf)); #ifdef CONFIG_PCI char *src; #endif @@ -409,7 +409,7 @@ void board_backlight_switch (int flag) printf ("hwmon IC init failed\n"); if (flag) { - param = getenv("brightness"); + param = env_get("brightness"); rc = param ? simple_strtol(param, NULL, 10) : -1; if (rc < 0) rc = DEFAULT_BRIGHTNESS; diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index 1ccdfa8e05..7e59fb259e 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -376,14 +376,14 @@ int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_hummingboard()) - setenv("board_name", "HUMMINGBOARD"); + env_set("board_name", "HUMMINGBOARD"); else - setenv("board_name", "CUBOXI"); + env_set("board_name", "CUBOXI"); if (is_mx6dq()) - setenv("board_rev", "MX6Q"); + env_set("board_rev", "MX6Q"); else - setenv("board_rev", "MX6DL"); + env_set("board_rev", "MX6DL"); #endif return 0; diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c index d6a84dba60..a02304f49e 100644 --- a/board/spear/common/spr_misc.c +++ b/board/spear/common/spr_misc.c @@ -53,15 +53,15 @@ int misc_init_r(void) #if defined(CONFIG_CMD_NET) uchar mac_id[6]; - if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id)) - eth_setenv_enetaddr("ethaddr", mac_id); + if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id)) + eth_env_set_enetaddr("ethaddr", mac_id); #endif - setenv("verify", "n"); + env_set("verify", "n"); #if defined(CONFIG_SPEAR_USBTTY) - setenv("stdin", "usbtty"); - setenv("stdout", "usbtty"); - setenv("stderr", "usbtty"); + env_set("stdin", "usbtty"); + env_set("stdout", "usbtty"); + env_set("stderr", "usbtty"); #ifndef CONFIG_SYS_NO_DCACHE dcache_enable(); diff --git a/board/spear/x600/Kconfig b/board/spear/x600/Kconfig index 6a1c5c7b40..59f2b1ef56 100644 --- a/board/spear/x600/Kconfig +++ b/board/spear/x600/Kconfig @@ -1,5 +1,8 @@ if TARGET_X600 +config SPL_LDSCRIPT + default "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" + config SYS_BOARD default "x600" diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c index 8c8abf6a06..d6763c306f 100644 --- a/board/st/stm32f429-discovery/stm32f429-discovery.c +++ b/board/st/stm32f429-discovery/stm32f429-discovery.c @@ -314,13 +314,13 @@ int misc_init_r(void) char serialno[25]; uint32_t u_id_low, u_id_mid, u_id_high; - if (!getenv("serial#")) { + if (!env_get("serial#")) { u_id_low = readl(&STM32_U_ID->u_id_low); u_id_mid = readl(&STM32_U_ID->u_id_mid); u_id_high = readl(&STM32_U_ID->u_id_high); sprintf(serialno, "%08x%08x%08x", u_id_high, u_id_mid, u_id_low); - setenv("serial#", serialno); + env_set("serial#", serialno); } return 0; diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 800f412b38..70e01437c4 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -602,7 +602,7 @@ void get_board_serial(struct tag_serialnr *serialnr) char *serial_string; unsigned long long serial; - serial_string = getenv("serial#"); + serial_string = env_get("serial#"); if (serial_string) { serial = simple_strtoull(serial_string, NULL, 16); @@ -646,7 +646,7 @@ static void parse_spl_header(const uint32_t spl_addr) return; } /* otherwise assume .scr format (mkimage-type script) */ - setenv_hex("fel_scriptaddr", spl->fel_script_address); + env_set_hex("fel_scriptaddr", spl->fel_script_address); } /* @@ -694,7 +694,7 @@ static void setup_environment(const void *fdt) else sprintf(ethaddr, "eth%daddr", i); - if (getenv(ethaddr)) + if (env_get(ethaddr)) continue; /* Non OUI / registered MAC address */ @@ -705,14 +705,14 @@ static void setup_environment(const void *fdt) mac_addr[4] = (sid[3] >> 8) & 0xff; mac_addr[5] = (sid[3] >> 0) & 0xff; - eth_setenv_enetaddr(ethaddr, mac_addr); + eth_env_set_enetaddr(ethaddr, mac_addr); } - if (!getenv("serial#")) { + if (!env_get("serial#")) { snprintf(serial_string, sizeof(serial_string), "%08x%08x", sid[0], sid[3]); - setenv("serial#", serial_string); + env_set("serial#", serial_string); } } } @@ -721,11 +721,11 @@ int misc_init_r(void) { __maybe_unused int ret; - setenv("fel_booted", NULL); - setenv("fel_scriptaddr", NULL); + env_set("fel_booted", NULL); + env_set("fel_scriptaddr", NULL); /* determine if we are running in FEL mode */ if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */ - setenv("fel_booted", "1"); + env_set("fel_booted", "1"); parse_spl_header(SPL_ADDR); } diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index bdbf02a067..85fda13188 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -146,7 +146,7 @@ int board_late_init(void) udelay(5000); #endif - e = getenv("gs_base_board"); + e = env_get("gs_base_board"); if (e != NULL) { if (strcmp(e, "G283") == 0) { int key = gpio_get_value(IMX_GPIO_NR(2, 29)); @@ -156,9 +156,9 @@ int board_late_init(void) gpio_set_value(IMX_GPIO_NR(1, 29), 0); gpio_set_value(IMX_GPIO_NR(4, 21), 0); - setenv("preboot", "run gs_slow_boot"); + env_set("preboot", "run gs_slow_boot"); } else - setenv("preboot", "run gs_fast_boot"); + env_set("preboot", "run gs_fast_boot"); } } diff --git a/board/tcl/sl50/board.c b/board/tcl/sl50/board.c index e89ee35d30..f79bb9dcdd 100644 --- a/board/tcl/sl50/board.c +++ b/board/tcl/sl50/board.c @@ -76,8 +76,8 @@ int spl_start_uboot(void) #ifdef CONFIG_SPL_ENV_SUPPORT env_init(); - env_relocate_spec(); - if (getenv_yesno("boot_os") != 1) + env_load(); + if (env_get_yesno("boot_os") != 1) return 1; #endif @@ -322,11 +322,11 @@ int board_eth_init(bd_t *bis) #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } #ifdef CONFIG_DRIVER_TI_CPSW @@ -340,9 +340,9 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("eth1addr")) { + if (!env_get("eth1addr")) { if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("eth1addr", mac_addr); + eth_env_set_enetaddr("eth1addr", mac_addr); } @@ -373,7 +373,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_USB_ETHER) && \ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) if (is_valid_ether_addr(mac_addr)) - eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + eth_env_set_enetaddr("usbnet_devaddr", mac_addr); rv = usb_eth_initialize(bis); if (rv < 0) diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index 25aeebc8d0..8c38f14cde 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -94,7 +94,7 @@ int misc_init_r(void) omap_die_id_display(); - eth_addr = getenv("ethaddr"); + eth_addr = env_get("ethaddr"); if (eth_addr) return 0; diff --git a/board/technologic/ts4800/ts4800.c b/board/technologic/ts4800/ts4800.c index 94251c6d91..8fe26a75e8 100644 --- a/board/technologic/ts4800/ts4800.c +++ b/board/technologic/ts4800/ts4800.c @@ -178,7 +178,7 @@ static int fec_get_mac_from_register(uint32_t base_addr) ethaddr[i] = (reg_mac[i / 4] >> ((i % 4) * 8)) & 0xFF; if (is_valid_ethaddr(ethaddr)) { - eth_setenv_enetaddr("ethaddr", ethaddr); + eth_env_set_enetaddr("ethaddr", ethaddr); return 0; } diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index 6e73ae114a..9eaae50f27 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -261,7 +261,7 @@ int misc_init_r(void) if (ret) return 0; - eth_addr = getenv("ethaddr"); + eth_addr = env_get("ethaddr"); if (!eth_addr) TAM3517_READ_MAC_FROM_EEPROM(&info); @@ -311,7 +311,7 @@ int board_video_init(void) fb = (void *)0x88000000; - s = getenv("panel"); + s = env_get("panel"); if (s) { index = simple_strtoul(s, NULL, 10); if (index < ARRAY_SIZE(lcd_cfg)) diff --git a/board/theobroma-systems/lion_rk3368/Kconfig b/board/theobroma-systems/lion_rk3368/Kconfig new file mode 100644 index 0000000000..d7aa487abd --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LION_RK3368 + +config SYS_BOARD + default "lion_rk3368" + +config SYS_VENDOR + default "theobroma-systems" + +config SYS_CONFIG_NAME + default "lion_rk3368" + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + +endif diff --git a/board/theobroma-systems/lion_rk3368/MAINTAINERS b/board/theobroma-systems/lion_rk3368/MAINTAINERS new file mode 100644 index 0000000000..857f784d21 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/MAINTAINERS @@ -0,0 +1,10 @@ +LION-RK3368 (RK3368-uQ7 system-on-module) +M: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> +M: Klaus Goger <klaus.goger@theobroma-systems.com> +S: Maintained +F: board/theobroma-systems/lion_rk3368 +F: include/configs/lion_rk3368.h +F: arch/arm/dts/rk3368-lion.dts +F: configs/lion-rk3368_defconfig +W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs +T: git git://git.theobroma-systems.com/lion-u-boot.git diff --git a/board/theobroma-systems/lion_rk3368/Makefile b/board/theobroma-systems/lion_rk3368/Makefile new file mode 100644 index 0000000000..f13a20b21e --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += lion_rk3368.o diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README new file mode 100644 index 0000000000..47304fcba6 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/README @@ -0,0 +1,60 @@ +Here is the step-by-step to boot to U-Boot on RK3368-uQ7 + +Get the Source and build ATF +============================ + + > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git + > cd arm-trusted-firmware + > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31 + > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin + +Configure U-Boot +================ + + > cd ../u-boot + > make lion-rk3368_defconfig + +Build the TPL/SPL stage +======================= + + > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm + > tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img + > cat spl/u-boot-spl-dtb.bin >> spl-3368.img + +Build the full U-Boot and a FIT image including the ATF +======================================================= + + > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb + +Write to a SD-card +================== + + > dd if=spl-3368.img of=/dev/sdb seek=64 + > dd if=u-boot.itb of=/dev/sdb seek=512 + + +If everything went according to plan, you should see the following +output on UART0: + +<debug_uart> U-Boot TPL board init +Trying to boot from BOOTROM +Returning to boot ROM... +Trying to boot from MMC1 +NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443 +NOTICE: BL31: Built : 18:04:47, Jul 5 2017 + + +U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200) + +Model: Theobroma Systems RK3368-uQ7 SoM +DRAM: 2 GiB +MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 +Using default environment + +In: serial@ff180000 +Out: serial@ff180000 +Err: serial@ff180000 +Net: +Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e +eth0: ethernet@ff290000 +Hit any key to stop autoboot: 2 diff --git a/board/theobroma-systems/lion_rk3368/fit_spl_atf.its b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its new file mode 100644 index 0000000000..405750f351 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/fit_spl_atf.its @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH + * + * Minimal dts for a SPL FIT image payload. + * + * SPDX-License-Identifier: GPL-2.0+ X11 + */ + +/dts-v1/; + +/ { + description = "FIT image with U-Boot proper, ATF bl31, DTB"; + #address-cells = <1>; + + images { + uboot { + description = "U-Boot (64-bit)"; + data = /incbin/("../../../u-boot-nodtb.bin"); + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x00200000>; + }; + atf { + description = "ARM Trusted Firmware"; + data = /incbin/("../../../bl31-rk3368.bin"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x00010000>; + entry = <0x00010000>; + }; + + fdt { + description = "RK3368-uQ7 (Lion) flat device-tree"; + data = /incbin/("../../../u-boot.dtb"); + type = "flat_dt"; + compression = "none"; + }; + }; + + configurations { + default = "conf"; + conf { + description = "Theobroma Systems RK3368-uQ7 (Puma) SoM"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; + }; + }; +}; diff --git a/board/theobroma-systems/lion_rk3368/lion_rk3368.c b/board/theobroma-systems/lion_rk3368/lion_rk3368.c new file mode 100644 index 0000000000..73b14883c3 --- /dev/null +++ b/board/theobroma-systems/lion_rk3368/lion_rk3368.c @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <dm.h> +#include <ram.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/grf_rk3368.h> +#include <asm/arch/timer.h> +#include <syscon.h> + +DECLARE_GLOBAL_DATA_PTR; + +int mach_cpu_init(void) +{ + return 0; +} + +int board_init(void) +{ + return 0; +} diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README index 250e3459a3..214281a329 100644 --- a/board/theobroma-systems/puma_rk3399/README +++ b/board/theobroma-systems/puma_rk3399/README @@ -37,7 +37,7 @@ Compile the ATF > cd arm-trusted-firmware > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 - > cp build/rk3399/release/bl31.bin ../u-boot + > cp build/rk3399/release/bl31.bin ../u-boot/bl31-rk3399.bin Compile the M0 firmware ======================= diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its index f93c251927..520f846d66 100644 --- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its +++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its @@ -13,7 +13,7 @@ #address-cells = <1>; images { - uboot@1 { + uboot { description = "U-Boot (64-bit)"; data = /incbin/("../../../u-boot-nodtb.bin"); type = "standalone"; @@ -21,23 +21,23 @@ compression = "none"; load = <0x00200000>; }; - atf@1 { + atf { description = "ARM Trusted Firmware"; - data = /incbin/("../../../bl31.bin"); + data = /incbin/("../../../bl31-rk3399.bin"); type = "firmware"; arch = "arm64"; compression = "none"; load = <0x00001000>; entry = <0x00001000>; }; - pmu@1 { + pmu { description = "Cortex-M0 firmware"; data = /incbin/("../../../rk3399m0.bin"); type = "pmu-firmware"; compression = "none"; load = <0xff8c0000>; }; - fdt@1 { + fdt { description = "RK3399-Q7 (Puma) flat device-tree"; data = /incbin/("../../../u-boot.dtb"); type = "flat_dt"; @@ -46,12 +46,12 @@ }; configurations { - default = "conf@1"; - conf@1 { + default = "conf"; + conf { description = "Theobroma Systems RK3399-Q7 (Puma) SoM"; - firmware = "uboot@1"; - loadables = "atf@1"; - fdt = "fdt@1"; + firmware = "uboot"; + loadables = "atf"; + fdt = "fdt"; }; }; }; diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 9347329eac..c6f8eed0c9 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -63,13 +63,13 @@ static void setup_macaddr(void) { #if CONFIG_IS_ENABLED(CMD_NET) int ret; - const char *cpuid = getenv("cpuid#"); + const char *cpuid = env_get("cpuid#"); u8 hash[SHA256_SUM_LEN]; int size = sizeof(hash); u8 mac_addr[6]; /* Only generate a MAC address, if none is set in the environment */ - if (getenv("ethaddr")) + if (env_get("ethaddr")) return; if (!cpuid) { @@ -89,7 +89,7 @@ static void setup_macaddr(void) /* Make this a valid MAC address and set it */ mac_addr[0] &= 0xfe; /* clear multicast bit */ mac_addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); #endif return; @@ -144,8 +144,8 @@ static void setup_serial(void) serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32; snprintf(serialno_str, sizeof(serialno_str), "%llx", serialno); - setenv("cpuid#", cpuid_str); - setenv("serial#", serialno_str); + env_set("cpuid#", cpuid_str); + env_set("serial#", serialno_str); #endif return; @@ -165,7 +165,7 @@ void get_board_serial(struct tag_serialnr *serialnr) char *serial_string; u64 serial = 0; - serial_string = getenv("serial#"); + serial_string = env_get("serial#"); if (serial_string) serial = simple_strtoull(serial_string, NULL, 16); diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 0a16529b5f..1a52bffc00 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -249,8 +249,8 @@ int spl_start_uboot(void) #ifdef CONFIG_SPL_ENV_SUPPORT env_init(); - env_relocate_spec(); - if (getenv_yesno("boot_os") != 1) + env_load(); + if (env_get_yesno("boot_os") != 1) return 1; #endif @@ -731,7 +731,7 @@ int board_late_init(void) * on HS devices. */ if (get_device_type() == HS_DEVICE) - setenv("boot_fit", "1"); + env_set("boot_fit", "1"); #endif #if !defined(CONFIG_SPL_BUILD) @@ -745,11 +745,11 @@ int board_late_init(void) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } mac_lo = readl(&cdev->macid1l); @@ -761,9 +761,9 @@ int board_late_init(void) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("eth1addr")) { + if (!env_get("eth1addr")) { if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("eth1addr", mac_addr); + eth_env_set_enetaddr("eth1addr", mac_addr); } #endif @@ -908,7 +908,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_USB_ETHER) && \ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + eth_env_set_enetaddr("usbnet_devaddr", mac_addr); rv = usb_eth_initialize(bis); if (rv < 0) diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 933596d59c..2c417e7545 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -626,7 +626,7 @@ int board_late_init(void) * on HS devices. */ if (get_device_type() == HS_DEVICE) - setenv("boot_fit", "1"); + env_set("boot_fit", "1"); #endif return 0; } @@ -791,10 +791,10 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { puts("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } mac_lo = readl(&cdev->macid1l); @@ -806,9 +806,9 @@ int board_eth_init(bd_t *bis) mac_addr[4] = mac_lo & 0xFF; mac_addr[5] = (mac_lo & 0xFF00) >> 8; - if (!getenv("eth1addr")) { + if (!env_get("eth1addr")) { if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("eth1addr", mac_addr); + eth_env_set_enetaddr("eth1addr", mac_addr); } if (board_is_eposevm()) { diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 00a31a97fd..7e7056cf71 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -592,7 +592,7 @@ void am57x_idk_lcd_detect(void) /* we will let default be "no lcd" */ } out: - setenv("idk_lcd", idk_lcd); + env_set("idk_lcd", idk_lcd); return; } @@ -612,7 +612,7 @@ int board_late_init(void) * on HS devices. */ if (get_device_type() == HS_DEVICE) - setenv("boot_fit", "1"); + env_set("boot_fit", "1"); /* * Set the GPIO7 Pad to POWERHOLD. This has higher priority @@ -742,8 +742,8 @@ int spl_start_uboot(void) #ifdef CONFIG_SPL_ENV_SUPPORT env_init(); - env_relocate_spec(); - if (getenv_yesno("boot_os") != 1) + env_load(); + if (env_get_yesno("boot_os") != 1) return 1; #endif @@ -933,11 +933,11 @@ int board_eth_init(bd_t *bis) mac_addr[4] = (mac_lo & 0xFF00) >> 8; mac_addr[5] = mac_lo & 0xFF; - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); @@ -949,9 +949,9 @@ int board_eth_init(bd_t *bis) mac_addr[4] = (mac_lo & 0xFF00) >> 8; mac_addr[5] = mac_lo & 0xFF; - if (!getenv("eth1addr")) { + if (!env_get("eth1addr")) { if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("eth1addr", mac_addr); + eth_env_set_enetaddr("eth1addr", mac_addr); } ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); @@ -986,9 +986,9 @@ int board_eth_init(bd_t *bis) for (i = 0; i < num_macs; i++) { u64_to_mac(mac1 + i, mac_addr); if (is_valid_ethaddr(mac_addr)) { - eth_setenv_enetaddr_by_index("eth", - i + 2, - mac_addr); + eth_env_set_enetaddr_by_index("eth", + i + 2, + mac_addr); } } } diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 887b577b6a..2f62fbec69 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -341,16 +341,16 @@ int misc_init_r(void) switch (get_board_revision()) { case REVISION_AXBX: printf("Beagle Rev Ax/Bx\n"); - setenv("beaglerev", "AxBx"); + env_set("beaglerev", "AxBx"); break; case REVISION_CX: printf("Beagle Rev C1/C2/C3\n"); - setenv("beaglerev", "Cx"); + env_set("beaglerev", "Cx"); MUX_BEAGLE_C(); break; case REVISION_C4: printf("Beagle Rev C4\n"); - setenv("beaglerev", "C4"); + env_set("beaglerev", "C4"); MUX_BEAGLE_C(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -360,7 +360,7 @@ int misc_init_r(void) break; case REVISION_XM_AB: printf("Beagle xM Rev A/B\n"); - setenv("beaglerev", "xMAB"); + env_set("beaglerev", "xMAB"); MUX_BEAGLE_XM(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -371,7 +371,7 @@ int misc_init_r(void) break; case REVISION_XM_C: printf("Beagle xM Rev C\n"); - setenv("beaglerev", "xMC"); + env_set("beaglerev", "xMC"); MUX_BEAGLE_XM(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -397,14 +397,14 @@ int misc_init_r(void) expansion_config.revision, expansion_config.fab_revision); MUX_TINCANTOOLS_ZIPPY(); - setenv("buddy", "zippy"); + env_set("buddy", "zippy"); break; case TINCANTOOLS_ZIPPY2: printf("Recognized Tincantools Zippy2 board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); MUX_TINCANTOOLS_ZIPPY(); - setenv("buddy", "zippy2"); + env_set("buddy", "zippy2"); break; case TINCANTOOLS_TRAINER: printf("Recognized Tincantools Trainer board (rev %d %s)\n", @@ -412,37 +412,37 @@ int misc_init_r(void) expansion_config.fab_revision); MUX_TINCANTOOLS_ZIPPY(); MUX_TINCANTOOLS_TRAINER(); - setenv("buddy", "trainer"); + env_set("buddy", "trainer"); break; case TINCANTOOLS_SHOWDOG: printf("Recognized Tincantools Showdow board (rev %d %s)\n", expansion_config.revision, expansion_config.fab_revision); /* Place holder for DSS2 definition for showdog lcd */ - setenv("defaultdisplay", "showdoglcd"); - setenv("buddy", "showdog"); + env_set("defaultdisplay", "showdoglcd"); + env_set("buddy", "showdog"); break; case KBADC_BEAGLEFPGA: printf("Recognized KBADC Beagle FPGA board\n"); MUX_KBADC_BEAGLEFPGA(); - setenv("buddy", "beaglefpga"); + env_set("buddy", "beaglefpga"); break; case LW_BEAGLETOUCH: printf("Recognized Liquidware BeagleTouch board\n"); - setenv("buddy", "beagletouch"); + env_set("buddy", "beagletouch"); break; case BRAINMUX_LCDOG: printf("Recognized Brainmux LCDog board\n"); - setenv("buddy", "lcdog"); + env_set("buddy", "lcdog"); break; case BRAINMUX_LCDOGTOUCH: printf("Recognized Brainmux LCDog Touch board\n"); - setenv("buddy", "lcdogtouch"); + env_set("buddy", "lcdogtouch"); break; case BBTOYS_WIFI: printf("Recognized BeagleBoardToys WiFi board\n"); MUX_BBTOYS_WIFI() - setenv("buddy", "bbtoys-wifi"); + env_set("buddy", "bbtoys-wifi"); break; case BBTOYS_VGA: printf("Recognized BeagleBoardToys VGA board\n"); @@ -459,20 +459,20 @@ int misc_init_r(void) case LSR_COM6L_ADPT: printf("Recognized LSR COM6L Adapter Board\n"); MUX_BBTOYS_WIFI() - setenv("buddy", "lsr-com6l-adpt"); + env_set("buddy", "lsr-com6l-adpt"); break; case BEAGLE_NO_EEPROM: printf("No EEPROM on expansion board\n"); - setenv("buddy", "none"); + env_set("buddy", "none"); break; default: printf("Unrecognized expansion board: %x\n", expansion_config.device_vendor); - setenv("buddy", "unknown"); + env_set("buddy", "unknown"); } if (expansion_config.content == 1) - setenv(expansion_config.env_var, expansion_config.env_setting); + env_set(expansion_config.env_var, expansion_config.env_setting); twl4030_power_init(); switch (get_board_revision()) { diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index c81baa12be..c21eb8c2d2 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -42,4 +42,3 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB - imply ENV_IS_IN_FAT if MMC_OMAP_HS diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c index 1da5ace923..6f07ec331a 100644 --- a/board/ti/common/board_detect.c +++ b/board/ti/common/board_detect.c @@ -379,21 +379,21 @@ void __maybe_unused set_board_info_env(char *name) struct ti_common_eeprom *ep = TI_EEPROM_DATA; if (name) - setenv("board_name", name); + env_set("board_name", name); else if (ep->name) - setenv("board_name", ep->name); + env_set("board_name", ep->name); else - setenv("board_name", unknown); + env_set("board_name", unknown); if (ep->version) - setenv("board_rev", ep->version); + env_set("board_rev", ep->version); else - setenv("board_rev", unknown); + env_set("board_rev", unknown); if (ep->serial) - setenv("board_serial", ep->serial); + env_set("board_serial", ep->serial); else - setenv("board_serial", unknown); + env_set("board_serial", unknown); } static u64 mac_to_u64(u8 mac[6]) @@ -451,8 +451,8 @@ void board_ti_set_ethaddr(int index) for (i = 0; i < num_macs; i++) { u64_to_mac(mac1 + i, mac_addr); if (is_valid_ethaddr(mac_addr)) { - eth_setenv_enetaddr_by_index("eth", i + index, - mac_addr); + eth_env_set_enetaddr_by_index("eth", i + index, + mac_addr); } } } diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 7d36f03fa1..93d3d0b54e 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -558,7 +558,7 @@ int board_late_init(void) * on HS devices. */ if (get_device_type() == HS_DEVICE) - setenv("boot_fit", "1"); + env_set("boot_fit", "1"); omap_die_id_serial(); omap_set_fastboot_vars(); @@ -825,8 +825,8 @@ int spl_start_uboot(void) #ifdef CONFIG_SPL_ENV_SUPPORT env_init(); - env_relocate_spec(); - if (getenv_yesno("boot_os") != 1) + env_load(); + if (env_get_yesno("boot_os") != 1) return 1; #endif @@ -893,11 +893,11 @@ int board_eth_init(bd_t *bis) mac_addr[4] = (mac_lo & 0xFF00) >> 8; mac_addr[5] = mac_lo & 0xFF; - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); @@ -909,9 +909,9 @@ int board_eth_init(bd_t *bis) mac_addr[4] = (mac_lo & 0xFF00) >> 8; mac_addr[5] = mac_lo & 0xFF; - if (!getenv("eth1addr")) { + if (!env_get("eth1addr")) { if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("eth1addr", mac_addr); + eth_env_set_enetaddr("eth1addr", mac_addr); } ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); diff --git a/board/ti/evm/MAINTAINERS b/board/ti/evm/MAINTAINERS index 612a08ace0..cd315c1635 100644 --- a/board/ti/evm/MAINTAINERS +++ b/board/ti/evm/MAINTAINERS @@ -1,5 +1,5 @@ EVM BOARD -M: Tom Rini <trini@konsulko.com> +M: Derald D. Woods <woods.technical@gmail.com> S: Maintained F: board/ti/evm/ F: include/configs/omap3_evm.h diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index a6c5a3d8e1..6bf57f9269 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -12,6 +12,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <dm.h> +#include <ns16550.h> #include <netdev.h> #include <asm/io.h> #include <asm/arch/mem.h> @@ -22,14 +24,35 @@ #include <i2c.h> #include <twl4030.h> #include <asm/mach-types.h> +#include <asm/omap_musb.h> #include <linux/mtd/nand.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/musb.h> #include "evm.h" -#define OMAP3EVM_GPIO_ETH_RST_GEN1 64 -#define OMAP3EVM_GPIO_ETH_RST_GEN2 7 +#ifdef CONFIG_USB_EHCI_HCD +#include <usb.h> +#include <asm/ehci-omap.h> +#endif + +#define OMAP3EVM_GPIO_ETH_RST_GEN1 64 +#define OMAP3EVM_GPIO_ETH_RST_GEN2 7 DECLARE_GLOBAL_DATA_PTR; +static const struct ns16550_platdata omap3_evm_serial = { + .base = OMAP34XX_UART1, + .reg_shift = 2, + .clock = V_NS16550_CLK, + .fcr = UART_FCR_DEFVAL, +}; + +U_BOOT_DEVICE(omap3_evm_uart) = { + "ns16550_serial", + &omap3_evm_serial +}; + static u32 omap3_evm_version; u32 get_omap3_evm_rev(void) @@ -60,25 +83,19 @@ static void omap3_evm_get_revision(void) default: omap3_evm_version = OMAP3EVM_BOARD_GEN_2; } -#else +#else /* !CONFIG_CMD_NET */ #if defined(CONFIG_STATIC_BOARD_REV) - /* - * Look for static defintion of the board revision - */ + /* Look for static defintion of the board revision */ omap3_evm_version = CONFIG_STATIC_BOARD_REV; #else - /* - * Fallback to the default above. - */ + /* Fallback to the default above */ omap3_evm_version = OMAP3EVM_BOARD_GEN_2; -#endif -#endif /* CONFIG_CMD_NET */ +#endif /* CONFIG_STATIC_BOARD_REV */ +#endif /* CONFIG_CMD_NET */ } -#ifdef CONFIG_USB_OMAP3 -/* - * MUSB port on OMAP3EVM Rev >= E requires extvbus programming. - */ +#if defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST) +/* MUSB port on OMAP3EVM Rev >= E requires extvbus programming. */ u8 omap3_evm_need_extvbus(void) { u8 retval = 0; @@ -88,7 +105,7 @@ u8 omap3_evm_need_extvbus(void) return retval; } -#endif +#endif /* CONFIG_USB_MUSB_{GADGET,HOST} */ /* * Routine: board_init @@ -105,7 +122,7 @@ int board_init(void) return 0; } -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) /* * Routine: get_board_mem_timings * Description: If we use SPL then there is no x-loader nor config header @@ -138,7 +155,34 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; timings->mr = MICRON_V_MR_165; } -#endif +#endif /* CONFIG_SPL_BUILD */ + +#if defined(CONFIG_USB_MUSB_OMAP2PLUS) +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_HOST) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_MUSB_GADGET) + .mode = MUSB_PERIPHERAL, +#else +#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET" +#endif /* CONFIG_USB_MUSB_{GADGET,HOST} */ + .config = &musb_config, + .power = 100, + .platform_ops = &omap2430_ops, + .board_data = &musb_board_data, +}; +#endif /* CONFIG_USB_MUSB_OMAP2PLUS */ /* * Routine: misc_init_r @@ -146,6 +190,7 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) */ int misc_init_r(void) { + twl4030_power_init(); #ifdef CONFIG_SYS_I2C_OMAP24XX i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); @@ -161,6 +206,13 @@ int misc_init_r(void) #endif omap_die_id_display(); +#if defined(CONFIG_USB_MUSB_OMAP2PLUS) + musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE); +#endif + +#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) + omap_die_id_usbethaddr(); +#endif return 0; } @@ -175,7 +227,7 @@ void set_muxconf_regs(void) MUX_EVM(); } -#ifdef CONFIG_CMD_NET +#if defined(CONFIG_CMD_NET) /* * Routine: setup_net_chip * Description: Setting up the configuration GPMC registers specific to the @@ -237,7 +289,7 @@ static void reset_net_chip(void) int board_eth_init(bd_t *bis) { int rc = 0; -#ifdef CONFIG_SMC911X +#if defined(CONFIG_SMC911X) #define STR_ENV_ETHADDR "ethaddr" struct eth_device *dev; @@ -245,16 +297,16 @@ int board_eth_init(bd_t *bis) rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + if (!eth_env_get_enetaddr(STR_ENV_ETHADDR, eth_addr)) { dev = eth_get_dev_by_index(0); if (dev) { - eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + eth_env_set_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); } else { printf("omap3evm: Couldn't get eth device\n"); rc = -1; } } -#endif +#endif /* CONFIG_SMC911X */ return rc; } #endif /* CONFIG_CMD_NET */ @@ -264,11 +316,35 @@ int board_mmc_init(bd_t *bis) { return omap_mmc_init(0, 0, 0, -1, -1); } -#endif -#if defined(CONFIG_MMC) void board_mmc_power_init(void) { twl4030_power_mmc_init(0); } -#endif +#endif /* CONFIG_MMC */ + +#if defined(CONFIG_USB_EHCI_HCD) +static struct omap_usbhs_board_data usbhs_bdata = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED +}; + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); +} + +int ehci_hcd_stop(int index) +{ + return omap_ehci_hcd_stop(); +} +#endif /* CONFIG_USB_EHCI_HCD */ + +#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) && !defined(CONFIG_CMD_NET) +int board_eth_init(bd_t *bis) +{ + return usb_eth_initialize(bis); +} +#endif /* CONFIG_USB_ETHER */ diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h index 91e9b88c54..0f8268b33e 100644 --- a/board/ti/evm/evm.h +++ b/board/ti/evm/evm.h @@ -278,12 +278,19 @@ static void reset_net_chip(void); /* TS_PEN_IRQ */\ MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ /* - LAN_INTR*/\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) /*McSPI1_CS3*/\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*McSPI2_CLK*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*McSPI2_SIMO*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*McSPI2_SOMI*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*McSPI2_CS0*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*McSPI2_CS1*/\ + /* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)) /*HSUSB2_DATA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)) /*HSUSB2_DATA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)) /*HSUSB2_DATA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)) /*HSUSB2_DATA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)) /*HSUSB2_DATA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)) /*HSUSB2_DATA3*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DATA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DATA1*/\ /*Control and debug */\ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ @@ -318,12 +325,6 @@ static void reset_net_chip(void); MUX_VAL(CP(ETK_D7_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D7*/\ MUX_VAL(CP(ETK_D8_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D8*/\ MUX_VAL(CP(ETK_D9_ES2 ), (IEN | PTD | DIS | M0)) /*ETK_D9*/\ - MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) /*ETK_D10*/\ - MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) /*ETK_D11*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) /*ETK_D12*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) /*ETK_D13*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) /*ETK_D14*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) /*ETK_D15*/\ /*Die to Die */\ MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index 5430c7daf2..a26b7f8131 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -61,7 +61,7 @@ configs/k2g_evm_defconfig Supported boot modes: - SPI NOR boot - - AEMIF NAND boot + - AEMIF NAND boot (K2E, K2L and K2HK) - UART boot - MMC boot (Only on K2G) @@ -69,7 +69,7 @@ Supported image formats: - u-boot.bin: for loading and running u-boot.bin through Texas Instruments code composure studio (CCS) and for UART boot. - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot - - MLO: gpimage for programming AEMIF NAND flash for NAND boot, MMC boot. + - MLO: gpimage for programming NAND flash for NAND boot, MMC boot. Build instructions: =================== diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index c61baeeb8c..ae86dfbe0a 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -74,7 +74,7 @@ int get_eth_env_param(char *env_name) char *env; int res = -1; - env = getenv(env_name); + env = env_get(env_name); if (env) res = simple_strtol(env, NULL, 0); @@ -151,9 +151,9 @@ int ft_board_setup(void *blob, bd_t *bd) u32 ddr3a_size; int unitrd_fixup = 0; - env = getenv("mem_lpae"); + env = env_get("mem_lpae"); lpae = env && simple_strtol(env, NULL, 0); - env = getenv("uinitrd_fixup"); + env = env_get("uinitrd_fixup"); unitrd_fixup = env && simple_strtol(env, NULL, 0); ddr3a_size = 0; @@ -180,13 +180,13 @@ int ft_board_setup(void *blob, bd_t *bd) } /* reserve memory at start of bank */ - env = getenv("mem_reserve_head"); + env = env_get("mem_reserve_head"); if (env) { start[0] += ustrtoul(env, &endp, 0); size[0] -= ustrtoul(env, &endp, 0); } - env = getenv("mem_reserve"); + env = env_get("mem_reserve"); if (env) size[0] -= ustrtoul(env, &endp, 0); @@ -251,7 +251,7 @@ void ft_board_setup_ex(void *blob, bd_t *bd) char *env; u64 *reserve_start; - env = getenv("mem_lpae"); + env = env_get("mem_lpae"); lpae = env && simple_strtol(env, NULL, 0); if (lpae) { diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c index 21605762ef..15f0f54af6 100644 --- a/board/ti/ks2_evm/board_k2g.c +++ b/board/ti/ks2_evm/board_k2g.c @@ -310,9 +310,9 @@ int board_late_init(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (board_is_k2g_gp()) - setenv("board_name", "66AK2GGP\0"); + env_set("board_name", "66AK2GGP\0"); else if (board_is_k2g_ice()) - setenv("board_name", "66AK2GIC\0"); + env_set("board_name", "66AK2GIC\0"); #endif return 0; } diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 6ffb53c4c6..c59e58a82a 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -103,7 +103,7 @@ int get_board_revision(void) board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO); #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", "panda-es"); + env_set("board_name", "panda-es"); #endif board_id = ((board_id4 << 4) | (board_id3 << 3) | (board_id2 << 2) | (board_id1 << 1) | (board_id0)); @@ -117,7 +117,7 @@ int get_board_revision(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3)) - setenv("board_name", "panda-a4"); + env_set("board_name", "panda-a4"); #endif } diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index 055a29d9c6..cdde6a8ca3 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -166,7 +166,7 @@ int board_eth_init(bd_t *bis) uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { printf("<ethaddr> not set. Reading from E-fuse\n"); /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); @@ -179,7 +179,7 @@ int board_eth_init(bd_t *bis) mac_addr[5] = (mac_lo & 0xFF00) >> 8; if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); else printf("Unable to read MAC address. Set <ethaddr>\n"); } diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c index 9d6c3d6b5d..cb40cc5f47 100644 --- a/board/ti/ti816x/evm.c +++ b/board/ti/ti816x/evm.c @@ -38,7 +38,7 @@ int board_eth_init(bd_t *bis) uint32_t mac_hi, mac_lo; struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { printf("<ethaddr> not set. Reading from E-fuse\n"); /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); @@ -51,7 +51,7 @@ int board_eth_init(bd_t *bis) mac_addr[5] = (mac_lo & 0xFF00) >> 8; if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); else printf("Unable to read MAC address. Set <ethaddr>\n"); } diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index d31eeb878a..741b3acce2 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -102,7 +102,7 @@ int misc_init_r(void) CONFIG_DM9000_BASE, GPMC_SIZE_16M); /* Use OMAP DIE_ID as MAC address */ - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) { printf("ethaddr not set, using Die ID\n"); die_id_0 = readl(&id_base->die_id_0); enetaddr[0] = 0x02; /* locally administered */ @@ -111,7 +111,7 @@ int misc_init_r(void) enetaddr[3] = (die_id_0 & 0x00ff0000) >> 16; enetaddr[4] = (die_id_0 & 0x0000ff00) >> 8; enetaddr[5] = (die_id_0 & 0x000000ff); - eth_setenv_enetaddr("ethaddr", enetaddr); + eth_env_set_enetaddr("ethaddr", enetaddr); } #endif diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index 8e5613cb12..7a3e493faf 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -9,6 +9,7 @@ #include <common.h> #include <dm.h> +#include <environment.h> #include <asm/arch/clock.h> #include <asm/arch/crm_regs.h> #include <asm/arch/mxc_hdmi.h> @@ -803,7 +804,7 @@ int board_late_init(void) rev = get_board_rev(); snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev); - setenv("board_rev", env_str); + env_set("board_rev", env_str); #ifndef CONFIG_TDX_APALIS_IMX6_V1_0 if ((rev & 0xfff0) == 0x0100) { @@ -813,12 +814,12 @@ int board_late_init(void) setup_iomux_dce_uart(); /* if using the default device tree, use version for V1.0 HW */ - fdt_env = getenv("fdt_file"); + fdt_env = env_get("fdt_file"); if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) { - setenv("fdt_file", FDT_FILE_V1_0); + env_set("fdt_file", FDT_FILE_V1_0); printf("patching fdt_file to " FDT_FILE_V1_0 "\n"); #ifndef CONFIG_ENV_IS_NOWHERE - saveenv(); + env_save(); #endif } } diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index cbf7aa952a..dbcd233782 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -676,7 +676,7 @@ int board_late_init(void) rev = get_board_rev(); snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev); - setenv("board_rev", env_str); + env_set("board_rev", env_str); #endif return 0; diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index 46dd15bac8..3858af9c40 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -535,7 +535,7 @@ int board_late_init(void) if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT) == SRC_SBMR2_BMOD_SERIAL) { printf("Serial Downloader recovery mode, disable autoboot\n"); - setenv("bootdelay", "-1"); + env_set("bootdelay", "-1"); } return 0; diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c index 1bf8ca8f76..328c4c0200 100644 --- a/board/toradex/common/tdx-cfg-block.c +++ b/board/toradex/common/tdx-cfg-block.c @@ -278,7 +278,7 @@ static int get_cfgblock_interactive(void) len = cli_readline(message); it = console_buffer[0]; - soc = getenv("soc"); + soc = env_get("soc"); if (!strcmp("mx6", soc)) { #ifdef CONFIG_MACH_TYPE if (it == 'y' || it == 'Y') diff --git a/board/toradex/common/tdx-common.c b/board/toradex/common/tdx-common.c index 0d267877fa..b4e4727e63 100644 --- a/board/toradex/common/tdx-common.c +++ b/board/toradex/common/tdx-common.c @@ -80,24 +80,24 @@ int show_board_info(void) tdx_hw_tag.ver_minor, (char)tdx_hw_tag.ver_assembly + 'A'); - setenv("serial#", tdx_serial_str); + env_set("serial#", tdx_serial_str); /* * Check if environment contains a valid MAC address, * set the one from config block if not */ - if (!eth_getenv_enetaddr("ethaddr", ethaddr)) - eth_setenv_enetaddr("ethaddr", (u8 *)&tdx_eth_addr); + if (!eth_env_get_enetaddr("ethaddr", ethaddr)) + eth_env_set_enetaddr("ethaddr", (u8 *)&tdx_eth_addr); #ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR - if (!eth_getenv_enetaddr("eth1addr", ethaddr)) { + if (!eth_env_get_enetaddr("eth1addr", ethaddr)) { /* * Secondary MAC address is allocated from block * 0x100000 higher then the first MAC address */ memcpy(ethaddr, &tdx_eth_addr, 6); ethaddr[3] += 0x10; - eth_setenv_enetaddr("eth1addr", ethaddr); + eth_env_set_enetaddr("eth1addr", ethaddr); } #endif diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index fcdea34f05..14991fdb00 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -251,7 +251,7 @@ int power_init_board(void) int board_late_init(void) { - setenv("board_name", tqma6_get_boardname()); + env_set("board_name", tqma6_get_boardname()); tqma6_bb_board_late_init(); diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c index 276c625cfd..7fa1289de0 100644 --- a/board/udoo/neo/neo.c +++ b/board/udoo/neo/neo.c @@ -437,7 +437,7 @@ int checkboard(void) int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - setenv("board_name", board_string()); + env_set("board_name", board_string()); #endif return 0; diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c index 7534935dde..a359626b81 100644 --- a/board/udoo/udoo.c +++ b/board/udoo/udoo.c @@ -255,9 +255,9 @@ int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_cpu_type(MXC_CPU_MX6Q)) - setenv("board_rev", "MX6Q"); + env_set("board_rev", "MX6Q"); else - setenv("board_rev", "MX6DL"); + env_set("board_rev", "MX6DL"); #endif return 0; } diff --git a/board/varisys/common/sys_eeprom.c b/board/varisys/common/sys_eeprom.c index b55ab818e6..69f596a4cc 100644 --- a/board/varisys/common/sys_eeprom.c +++ b/board/varisys/common/sys_eeprom.c @@ -401,7 +401,7 @@ int mac_read_from_generic_eeprom(const char *envvar, int chip, mac[5]); printf("MAC: %s\n", ethaddr); - setenv(envvar, ethaddr); + env_set(envvar, ethaddr); } return ret; @@ -486,8 +486,8 @@ int mac_read_from_eeprom_common(void) /* Only initialize environment variables that are blank * (i.e. have not yet been set) */ - if (!getenv(enetvar)) - setenv(enetvar, ethaddr); + if (!env_get(enetvar)) + env_set(enetvar, ethaddr); } } diff --git a/board/varisys/cyrus/cyrus.c b/board/varisys/cyrus/cyrus.c index 74f4473877..30f518abe8 100644 --- a/board/varisys/cyrus/cyrus.c +++ b/board/varisys/cyrus/cyrus.c @@ -87,8 +87,8 @@ int ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - base = getenv_bootm_low(); - size = getenv_bootm_size(); + base = env_get_bootm_low(); + size = env_get_bootm_size(); fdt_fixup_memory(blob, (u64)base, (u64)size); diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c index d3b1f1564f..cb39190c28 100644 --- a/board/vscom/baltos/board.c +++ b/board/vscom/baltos/board.c @@ -68,7 +68,7 @@ static int baltos_set_console(void) printf("DIPs: 0x%1x\n", (~dips) & 0xf); if ((dips & 0xf) == 0xe) - setenv("console", "ttyUSB0,115200n8"); + env_set("console", "ttyUSB0,115200n8"); return 0; } @@ -373,7 +373,7 @@ int board_late_init(void) return -ENODEV; } - setenv("board_name", model); + env_set("board_name", model); #endif return 0; @@ -453,11 +453,11 @@ int board_eth_init(bd_t *bis) #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) - if (!getenv("ethaddr")) { + if (!env_get("ethaddr")) { printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ethaddr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_env_set_enetaddr("ethaddr", mac_addr); } #ifdef CONFIG_DRIVER_TI_CPSW diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 1dbc966b6e..adfcf48562 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -425,14 +425,14 @@ int board_late_init(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG if (is_mx6dq()) - setenv("board_rev", "MX6Q"); + env_set("board_rev", "MX6Q"); else - setenv("board_rev", "MX6DL"); + env_set("board_rev", "MX6DL"); if (is_revc1()) - setenv("board_name", "C1"); + env_set("board_name", "C1"); else - setenv("board_name", "B1"); + env_set("board_name", "B1"); #endif return 0; } diff --git a/board/work-microwave/work_92105/Kconfig b/board/work-microwave/work_92105/Kconfig index 1fde4b29aa..4bc34ed01f 100644 --- a/board/work-microwave/work_92105/Kconfig +++ b/board/work-microwave/work_92105/Kconfig @@ -17,4 +17,11 @@ config CMD_HD44760 help This controls the LCD driver. +config CMD_MAX6957 + bool "Enable 'max6957aax' PMIC command" + help + DEPRECATED: Needs conversion to driver model. + + This allows PMIC registers to be read and written. + endif diff --git a/board/work-microwave/work_92105/work_92105_display.c b/board/work-microwave/work_92105/work_92105_display.c index 37a736351c..c997cea6f0 100644 --- a/board/work-microwave/work_92105/work_92105_display.c +++ b/board/work-microwave/work_92105/work_92105_display.c @@ -228,7 +228,7 @@ void work_92105_display_init(void) i2c_write(0x2c, 0x01, 1, &enable_backlight, 1); /* set display contrast */ - display_contrast_str = getenv("fwopt_dispcontrast"); + display_contrast_str = env_get("fwopt_dispcontrast"); if (display_contrast_str) display_contrast = simple_strtoul(display_contrast_str, NULL, 10); diff --git a/board/xes/common/board.c b/board/xes/common/board.c index 4ed6f50e5c..b76eb948d5 100644 --- a/board/xes/common/board.c +++ b/board/xes/common/board.c @@ -51,13 +51,13 @@ int checkboard(void) /* Display board specific information */ puts(" "); - i = getenv_f("board_rev", buf, sizeof(buf)); + i = env_get_f("board_rev", buf, sizeof(buf)); if (i > 0) printf("Rev %s, ", buf); - i = getenv_f("serial#", buf, sizeof(buf)); + i = env_get_f("serial#", buf, sizeof(buf)); if (i > 0) printf("Serial# %s, ", buf); - i = getenv_f("board_cfg", buf, sizeof(buf)); + i = env_get_f("board_cfg", buf, sizeof(buf)); if (i > 0) printf("Cfg %s", buf); puts("\n"); diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index b2fbecf6de..90ef542458 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -86,22 +86,22 @@ int board_late_init(void) { switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { case ZYNQ_BM_QSPI: - setenv("modeboot", "qspiboot"); + env_set("modeboot", "qspiboot"); break; case ZYNQ_BM_NAND: - setenv("modeboot", "nandboot"); + env_set("modeboot", "nandboot"); break; case ZYNQ_BM_NOR: - setenv("modeboot", "norboot"); + env_set("modeboot", "norboot"); break; case ZYNQ_BM_SD: - setenv("modeboot", "sdboot"); + env_set("modeboot", "sdboot"); break; case ZYNQ_BM_JTAG: - setenv("modeboot", "jtagboot"); + env_set("modeboot", "jtagboot"); break; default: - setenv("modeboot", ""); + env_set("modeboot", ""); break; } diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index aebd3df8a9..d17868b0c2 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -318,10 +318,10 @@ int board_late_init(void) * and default boot_targets */ new_targets = calloc(1, strlen(mode) + - strlen(getenv("boot_targets")) + 2); + strlen(env_get("boot_targets")) + 2); - sprintf(new_targets, "%s %s", mode, getenv("boot_targets")); - setenv("boot_targets", new_targets); + sprintf(new_targets, "%s %s", mode, env_get("boot_targets")); + env_set("boot_targets", new_targets); return 0; } diff --git a/cmd/Kconfig b/cmd/Kconfig index cd72ea8e56..42d955c96a 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -158,6 +158,12 @@ config CMD_LICENSE help Print GPL license text +config CMD_REGINFO + bool "reginfo" + depends on PPC + help + Register dump + endmenu menu "Boot commands" @@ -270,6 +276,54 @@ config CMD_POWEROFF help Poweroff/Shutdown the system +config CMD_SPL + bool "spl export - Export boot information for Falcon boot" + depends on SPL + help + Falcon mode allows booting directly from SPL into an Operating + System such as Linux, thus skipping U-Boot proper. See + doc/README.falcon for full information about how to use this + command. + +config CMD_SPL_NAND_OFS + hex "Offset of OS command line args for Falcon-mode NAND boot" + depends on CMD_SPL + default 0 + help + This provides the offset of the command line arguments for Linux + when booting from NAND in Falcon mode. See doc/README.falcon + for full information about how to use this option (and also see + board/gateworks/gw_ventana/README for an example). + +config CMD_SPL_WRITE_SIZE + hex "Size of argument area" + depends on CMD_SPL + default 0x2000 + help + This provides the size of the command-line argument area in NAND + flash used by Falcon-mode boot. See the documentation until CMD_SPL + for detail. + +config CMD_THOR_DOWNLOAD + bool "thor - TIZEN 'thor' download" + help + Implements the 'thor' download protocol. This is a way of + downloading a software update over USB from an attached host. + There is no documentation about this within the U-Boot source code + but you should be able to find something on the interwebs. + +config CMD_ZBOOT + bool "zboot - x86 boot command" + help + With x86 machines it is common to boot a bzImage file which + contains both a kernel and a setup.bin file. The latter includes + configuration information from the dark ages which x86 boards still + need to pick things out of. + + Consider using FIT in preference to this since it supports directly + booting both 32- and 64-bit kernels, as well as secure boot. + Documentation is available in doc/uImage.FIT/x86-fit-boot.txt + endmenu menu "Environment commands" @@ -336,20 +390,6 @@ endmenu menu "Memory commands" -config CMD_MEMORY - bool "md, mm, nm, mw, cp, cmp, base, loop" - default y - help - Memory commands. - md - memory display - mm - memory modify (auto-incrementing address) - nm - memory modify (constant address) - mw - memory write (fill) - cp - memory copy - cmp - memory compare - base - print or set address offset - loop - initialize loop on address range - config CMD_CRC32 bool "crc32" select HASH @@ -411,6 +451,11 @@ config EEPROM_LAYOUT_HELP_STRING Help printed with the LAYOUT VERSIONS part of the 'eeprom' command's help. +config LOOPW + bool "loopw" + help + Infinite write loop on address range + config CMD_MD5SUM bool "md5sum" default n @@ -425,22 +470,24 @@ config MD5SUM_VERIFY help Add -v option to verify data against an MD5 checksum. -config CMD_SHA1SUM - bool "sha1sum" - select SHA1 - help - Compute SHA1 checksum. - -config SHA1SUM_VERIFY - bool "sha1sum -v" - depends on CMD_SHA1SUM +config CMD_MEMINFO + bool "meminfo" help - Add -v option to verify data against a SHA1 checksum. + Display memory information. -config LOOPW - bool "loopw" +config CMD_MEMORY + bool "md, mm, nm, mw, cp, cmp, base, loop" + default y help - Infinite write loop on address range + Memory commands. + md - memory display + mm - memory modify (auto-incrementing address) + nm - memory modify (constant address) + mw - memory write (fill) + cp - memory copy + cmp - memory compare + base - print or set address offset + loop - initialize loop on address range config CMD_MEMTEST bool "memtest" @@ -453,10 +500,25 @@ config CMD_MX_CYCLIC mdc - memory display cyclic mwc - memory write cyclic -config CMD_MEMINFO - bool "meminfo" +config CMD_SHA1SUM + bool "sha1sum" + select SHA1 help - Display memory information. + Compute SHA1 checksum. + +config SHA1SUM_VERIFY + bool "sha1sum -v" + depends on CMD_SHA1SUM + help + Add -v option to verify data against a SHA1 checksum. + +config CMD_STRINGS + bool "strings - display strings in memory" + help + This works similarly to the Unix 'strings' command except that it + works with a memory range. String of printable characters found + within the range are displayed. The minimum number of characters + for a sequence to be considered a string can be provided. endmenu @@ -483,6 +545,12 @@ endmenu menu "Device access commands" +config CMD_ARMFLASH + #depends on FLASH_CFI_DRIVER + bool "armflash" + help + ARM Ltd reference designs flash partition access + config CMD_CLK bool "clk - Show clock frequencies" help @@ -492,6 +560,27 @@ config CMD_CLK clock values from associated drivers. However currently no command exists for this. +config CMD_DEMO + bool "demo - Demonstration commands for driver model" + depends on DM + help + Provides a 'demo' command which can be used to play around with + driver model. To use this properly you will need to enable one or + both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). + Otherwise you will always get an empty list of devices. The demo + devices are defined in the sandbox device tree, so the easiest + option is to use sandbox and pass the -d point to sandbox's + u-boot.dtb file. + +config CMD_DFU + bool "dfu" + select USB_FUNCTION_DFU + help + Enables the command "dfu" which is used to have U-Boot create a DFU + class device via USB. This command requires that the "dfu_alt_info" + environment variable be set and define the alt settings to expose to + the host. + config CMD_DM bool "dm - Access to driver model information" depends on DM @@ -503,17 +592,88 @@ config CMD_DM can be useful to see the state of driver model for debugging or interest. -config CMD_DEMO - bool "demo - Demonstration commands for driver model" - depends on DM +config CMD_FDC + bool "fdcboot - Boot from floppy device" help - Provides a 'demo' command which can be used to play around with - driver model. To use this properly you will need to enable one or - both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). - Otherwise you will always get an empty list of devices. The demo - devices are defined in the sandbox device tree, so the easiest - option is to use sandbox and pass the -d point to sandbox's - u-boot.dtb file. + The 'fdtboot' command allows booting an image from a floppy disk. + +config CMD_FLASH + bool "flinfo, erase, protect" + default y + help + NOR flash support. + flinfo - print FLASH memory information + erase - FLASH memory + protect - enable or disable FLASH write protection + +config CMD_FPGA + bool "fpga" + default y + help + FPGA support. + +config CMD_FPGA_LOADBP + bool "fpga loadbp - load partial bitstream (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGA_LOADFS + bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" + depends on CMD_FPGA + help + Supports loading an FPGA device from a FAT filesystem. + +config CMD_FPGA_LOADMK + bool "fpga loadmk - load bitstream from image" + depends on CMD_FPGA + help + Supports loading an FPGA device from a image generated by mkimage. + +config CMD_FPGA_LOADP + bool "fpga loadp - load partial bitstream" + depends on CMD_FPGA + help + Supports loading an FPGA device from a bitstream buffer containing + a partial bitstream. + +config CMD_FPGAD + bool "fpgad - dump FPGA registers" + help + (legacy, needs conversion to driver model) + Provides a way to dump FPGA registers by calling the board-specific + fpga_get_reg() function. This functions similarly to the 'md' + command. + +config CMD_FUSE + bool "fuse - support for the fuse subssystem" + help + (deprecated - needs conversion to driver model) + This allows reading, sensing, programming or overriding fuses + which control the behaviour of the device. The command uses the + fuse_...() API. + +config CMD_GPIO + bool "gpio" + help + GPIO support. + +config CMD_GPT + bool "GPT (GUID Partition Table) command" + select PARTITION_UUIDS + select EFI_PARTITION + help + Enable the 'gpt' command to ready and write GPT style partition + tables. + +config CMD_GPT_RENAME + bool "GPT partition renaming commands" + depends on CMD_GPT + help + Enables the 'gpt' command to interchange names on two GPT + partitions via the 'gpt swap' command or to rename single + partitions via the 'rename' command. config CMD_IDE bool "ide - Support for IDE drivers" @@ -566,6 +726,11 @@ config CMD_IOTRACE might be useful to enhance tracing to only checksum the accesses and not the data read/written. +config CMD_I2C + bool "i2c" + help + I2C support. + config CMD_LOADB bool "loadb" default y @@ -578,37 +743,6 @@ config CMD_LOADS help Load an S-Record file over serial line -config CMD_FLASH - bool "flinfo, erase, protect" - default y - help - NOR flash support. - flinfo - print FLASH memory information - erase - FLASH memory - protect - enable or disable FLASH write protection - -config CMD_GPT - bool "GPT (GUID Partition Table) command" - select PARTITION_UUIDS - select EFI_PARTITION - help - Enable the 'gpt' command to ready and write GPT style partition - tables. - -config CMD_GPT_RENAME - bool "GPT partition renaming commands" - depends on CMD_GPT - help - Enables the 'gpt' command to interchange names on two GPT - partitions via the 'gpt swap' command or to rename single - partitions via the 'rename' command. - -config CMD_ARMFLASH - #depends on FLASH_CFI_DRIVER - bool "armflash" - help - ARM Ltd reference designs flash partition access - config CMD_MMC bool "mmc" help @@ -639,121 +773,132 @@ config CMD_NAND_TORTURE endif # CMD_NAND -config CMD_PART - bool "part" - select PARTITION_UUIDS +config CMD_NVME + bool "nvme" + depends on NVME + default y if NVME help - Read and display information about the partition table on - various media. + NVM Express device support -config CMD_SF - bool "sf" +config CMD_MMC_SPI + bool "mmc_spi - Set up MMC SPI device" help - SPI Flash support + Provides a way to set up an MMC (Multimedia Card) SPI (Serial + Peripheral Interface) device. The device provides a means of + accessing an MMC device via SPI using a single data line, limited + to 20MHz. It is useful since it reduces the amount of protocol code + required. -config CMD_SPI - bool "sspi" +config CMD_ONENAND + bool "onenand - access to onenand device" help - SPI utility command. + OneNAND is a brand of NAND ('Not AND' gate) flash which provides + various useful features. This command allows reading, writing, + and erasing blocks. It allso provides a way to show and change + bad blocks, and test the device. -config CMD_I2C - bool "i2c" +config CMD_PART + bool "part" + select PARTITION_UUIDS help - I2C support. + Read and display information about the partition table on + various media. -config CMD_USB - bool "usb" +config CMD_PCI + bool "pci - Access PCI devices" help - USB support. + Provide access to PCI (Peripheral Interconnect Bus), a type of bus + used on some devices to allow the CPU to communicate with its + peripherals. Sub-commands allow bus enumeration, displaying and + changing configuration space and a few other features. -config CMD_DFU - bool "dfu" - select USB_FUNCTION_DFU +config CMD_PCMCIA + bool "pinit - Set up PCMCIA device" help - Enables the command "dfu" which is used to have U-Boot create a DFU - class device via USB. + Provides a means to initialise a PCMCIA (Personal Computer Memory + Card International Association) device. This is an old standard from + about 1990. These devices are typically removable memory or network + cards using a standard 68-pin connector. -config CMD_USB_MASS_STORAGE - bool "UMS usb mass storage" +config CMD_READ + bool "read - Read binary data from a partition" help - USB mass storage support + Provides low-level access to the data in a partition. -config CMD_FPGA - bool "fpga" - default y +config CMD_REMOTEPROC + bool "remoteproc" + depends on REMOTEPROC help - FPGA support. + Support for Remote Processor control -config CMD_FPGA_LOADBP - bool "fpga loadbp - load partial bitstream (Xilinx only)" - depends on CMD_FPGA +config CMD_SATA + bool "sata - Access SATA subsystem" + select SATA help - Supports loading an FPGA device from a bitstream buffer containing - a partial bitstream. + SATA (Serial Advanced Technology Attachment) is a serial bus + standard for connecting to hard drives and other storage devices. + This command provides information about attached devices and allows + reading, writing and other operations. -config CMD_FPGA_LOADFS - bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" - depends on CMD_FPGA - help - Supports loading an FPGA device from a FAT filesystem. + SATA replaces PATA (originally just ATA), which stands for Parallel AT + Attachment, where AT refers to an IBM AT (Advanced Technology) + computer released in 1984. -config CMD_FPGA_LOADMK - bool "fpga loadmk - load bitstream from image" - depends on CMD_FPGA +config CMD_SAVES + bool "saves - Save a file over serial in S-Record format" help - Supports loading an FPGA device from a image generated by mkimage. + Provides a way to save a binary file using the Motorola S-Record + format over the serial line. -config CMD_FPGA_LOADP - bool "fpga loadp - load partial bitstream" - depends on CMD_FPGA +config CMD_SDRAM + bool "sdram - Print SDRAM configuration information" help - Supports loading an FPGA device from a bitstream buffer containing - a partial bitstream. + Provides information about attached SDRAM. This assumed that the + SDRAM has an EEPROM with information that can be read using the + I2C bus. This is only available on some boards. -config CMD_FPGAD - bool "fpgad - dump FPGA registers" +config CMD_SF + bool "sf" help - (legacy, needs conversion to driver model) - Provides a way to dump FPGA registers by calling the board-specific - fpga_get_reg() function. This functions similarly to the 'md' - command. + SPI Flash support -config CMD_FUSE - bool "fuse - support for the fuse subssystem" +config CMD_SF_TEST + bool "sf test - Allow testing of SPI flash" help - (deprecated - needs conversion to driver model) - This allows reading, sensing, programming or overriding fuses - which control the behaviour of the device. The command uses the - fuse_...() API. + Provides a way to test that SPI flash is working correctly. The + test is destructive, in that an area of SPI flash must be provided + for the test to use. Performance information is also provided, + measuring the performance of reading, writing and erasing in + Mbps (Million Bits Per Second). This value should approximately + equal the SPI bus speed for a single-bit-wide SPI bus, assuming + everything is working properly. -config CMD_REMOTEPROC - bool "remoteproc" - depends on REMOTEPROC +config CMD_SPI + bool "sspi" help - Support for Remote Processor control + SPI utility command. -config CMD_GPIO - bool "gpio" +config CMD_TSI148 + bool "tsi148 - Command to access tsi148 device" help - GPIO support. + This provides various sub-commands to initialise and configure the + Turndra tsi148 device. See the command help for full details. -config CMD_FDC - bool "fdcboot - Boot from floppy device" +config CMD_UNIVERSE + bool "universe - Command to set up the Turndra Universe controller" help - The 'fdtboot' command allows booting an image from a floppy disk. + This allows setting up the VMEbus provided by this controller. + See the command help for full details. -config CMD_SATA - bool "sata - Access SATA subsystem" - select SATA +config CMD_USB + bool "usb" help - SATA (Serial Advanced Technology Attachment) is a serial bus - standard for connecting to hard drives and other storage devices. - This command provides information about attached devices and allows - reading, writing and other operations. + USB support. - SATA replaces PATA (originally just ATA), which stands for Parallel AT - Attachment, where AT refers to an IBM AT (Advanced Technology) - computer released in 1984. +config CMD_USB_MASS_STORAGE + bool "UMS usb mass storage" + help + USB mass storage support endmenu @@ -990,6 +1135,25 @@ config CMD_QFW source "cmd/mvebu/Kconfig" +config CMD_TERMINAL + bool "terminal - provides a way to attach a serial terminal" + help + Provides a 'cu'-like serial terminal command. This can be used to + access other serial ports from the system console. The terminal + is very simple with no special processing of characters. As with + cu, you can press ~. (tilde followed by period) to exit. + +config CMD_UUID + bool "uuid, guid - generation of unique IDs" + help + This enables two commands: + + uuid - generate random Universally Unique Identifier + guid - generate Globally Unique Identifier based on random UUID + + The two commands are very similar except for the endianness of the + output. + endmenu config CMD_BOOTSTAGE @@ -1221,6 +1385,56 @@ config MTDPARTS_DEFAULT Defines a default MTD partitioning scheme in the Linux MTD command line partitions format +config CMD_MTDPARTS_SPREAD + bool "Padd partition size to take account of bad blocks" + depends on CMD_MTDPARTS + help + This enables the 'spread' sub-command of the mtdparts command. + This command will modify the existing mtdparts variable by increasing + the size of the partitions such that 1) each partition's net size is + at least as large as the size specified in the mtdparts variable and + 2) each partition starts on a good block. + +config CMD_REISER + bool "reiser - Access to reiserfs filesystems" + help + This provides two commands which operate on a resierfs filesystem, + commonly used some years ago: + + reiserls - list files + reiserload - load a file + +config CMD_SCSI + bool "scsi - Access to SCSI devices" + default y if SCSI + help + This provides a 'scsi' command which provides access to SCSI (Small + Computer System Interface) devices. The command provides a way to + scan the bus, reset the bus, read and write data and get information + about devices. + +config CMD_YAFFS2 + bool "yaffs2 - Access of YAFFS2 filesystem" + depends on YAFFS2 + default y + help + This provides commands for accessing a YAFFS2 filesystem. Yet + Another Flash Filesystem 2 is a filesystem designed specifically + for NAND flash. It incorporates bad-block management and ensures + that device writes are sequential regardless of filesystem + activity. + +config CMD_ZFS + bool "zfs - Access of ZFS filesystem" + help + This provides commands to accessing a ZFS filesystem, commonly used + on Solaris systems. Two sub-commands are provided: + + zfsls - list files in a directory + zfsload - load a file + + See doc/README.zfs for more details. + endmenu menu "Debug commands" @@ -1257,6 +1471,15 @@ config CMD_KGDB single-stepping, inspecting variables, etc. This is supported only on PowerPC at present. +config CMD_TRACE + bool "trace - Support tracing of function calls and timing" + help + Enables a command to control using of function tracing within + U-Boot. This allows recording of call traces including timing + information. The command can write data to memory for exporting + for analsys (e.g. using bootchart). See doc/README.trace for full + details. + endmenu config CMD_UBI diff --git a/cmd/Makefile b/cmd/Makefile index bd231f24d8..13c86f8fcc 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -97,7 +97,6 @@ ifdef CONFIG_PCI obj-$(CONFIG_CMD_PCI) += pci.o endif obj-y += pcmcia.o -obj-$(CONFIG_CMD_PORTIO) += portio.o obj-$(CONFIG_CMD_PXE) += pxe.o obj-$(CONFIG_CMD_QFW) += qfw.o obj-$(CONFIG_CMD_READ) += read.o @@ -106,8 +105,9 @@ obj-$(CONFIG_CMD_REISER) += reiser.o obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o obj-$(CONFIG_SANDBOX) += host.o obj-$(CONFIG_CMD_SATA) += sata.o +obj-$(CONFIG_CMD_NVME) += nvme.o obj-$(CONFIG_CMD_SF) += sf.o -obj-$(CONFIG_SCSI) += scsi.o disk.o +obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o obj-$(CONFIG_CMD_SETEXPR) += setexpr.o obj-$(CONFIG_CMD_SPI) += spi.o @@ -133,7 +133,7 @@ obj-$(CONFIG_CMD_FS_UUID) += fs_uuid.o obj-$(CONFIG_CMD_USB_MASS_STORAGE) += usb_mass_storage.o obj-$(CONFIG_CMD_THOR_DOWNLOAD) += thordown.o obj-$(CONFIG_CMD_XIMG) += ximg.o -obj-$(CONFIG_YAFFS2) += yaffs2.o +obj-$(CONFIG_CMD_YAFFS2) += yaffs2.o obj-$(CONFIG_CMD_SPL) += spl.o obj-$(CONFIG_CMD_ZIP) += zip.o obj-$(CONFIG_CMD_ZFS) += zfs.o diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index 81ac78da94..27ffcd55bc 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -28,7 +28,7 @@ static void print_eth(int idx) sprintf(name, "eth%iaddr", idx); else strcpy(name, "ethaddr"); - val = getenv(name); + val = env_get(name); if (!val) val = "(not set)"; printf("%-12s= %s\n", name, val); @@ -51,7 +51,7 @@ static void print_eths(void) } while (dev); printf("current eth = %s\n", eth_get_name()); - printf("ip_addr = %s\n", getenv("ipaddr")); + printf("ip_addr = %s\n", env_get("ipaddr")); } #endif @@ -141,7 +141,7 @@ static inline void print_eth_ip_addr(void) #if defined(CONFIG_HAS_ETH5) print_eth(5); #endif - printf("IP addr = %s\n", getenv("ipaddr")); + printf("IP addr = %s\n", env_get("ipaddr")); #endif } @@ -166,7 +166,7 @@ static inline void __maybe_unused print_std_bdinfo(const bd_t *bd) #if defined(CONFIG_PPC) void __weak board_detail(void) { - /* Please define boot_detail() for your platform */ + /* Please define board_detail() for your platform */ } int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/cmd/bootm.c b/cmd/bootm.c index daf15d9e80..df0bbe19ca 100644 --- a/cmd/bootm.c +++ b/cmd/bootm.c @@ -138,7 +138,7 @@ int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd) { - const char *ep = getenv("autostart"); + const char *ep = env_get("autostart"); if (ep && !strcmp(ep, "yes")) { char *local_args[2]; @@ -202,7 +202,7 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_BOOTD) int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return run_command(getenv("bootcmd"), flag); + return run_command(env_get("bootcmd"), flag); } U_BOOT_CMD( diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c index 5879065c2e..870db7c1de 100644 --- a/cmd/bootmenu.c +++ b/cmd/bootmenu.c @@ -53,7 +53,7 @@ static char *bootmenu_getoption(unsigned short int n) return NULL; sprintf(name, "bootmenu_%d", n); - return getenv(name); + return env_get(name); } static void bootmenu_print_entry(void *data) @@ -483,7 +483,7 @@ int do_bootmenu(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) delay_str = argv[1]; if (!delay_str) - delay_str = getenv("bootmenu_delay"); + delay_str = env_get("bootmenu_delay"); if (delay_str) delay = (int)simple_strtol(delay_str, NULL, 10); diff --git a/cmd/cbfs.c b/cmd/cbfs.c index 95a11a3616..799ba01fcc 100644 --- a/cmd/cbfs.c +++ b/cmd/cbfs.c @@ -80,7 +80,7 @@ static int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, printf("\n%ld bytes read\n", size); - setenv_hex("filesize", size); + env_set_hex("filesize", size); return 0; } diff --git a/cmd/cramfs.c b/cmd/cramfs.c index 49ee36c74a..86f1bac272 100644 --- a/cmd/cramfs.c +++ b/cmd/cramfs.c @@ -104,7 +104,7 @@ int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) struct mtdids id; ulong addr; - addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16); + addr = simple_strtoul(env_get("cramfsaddr"), NULL, 16); /* hack! */ /* cramfs_* only supports NOR flash chips */ @@ -117,9 +117,9 @@ int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) part.offset = (u64)(uintptr_t) map_sysmem(addr - OFFSET_ADJUSTMENT, 0); /* pre-set Boot file name */ - if ((filename = getenv("bootfile")) == NULL) { + filename = env_get("bootfile"); + if (!filename) filename = "uImage"; - } if (argc == 2) { filename = argv[1]; @@ -138,7 +138,7 @@ int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (size > 0) { printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n", size, offset); - setenv_hex("filesize", size); + env_set_hex("filesize", size); } else { printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename); } @@ -169,7 +169,7 @@ int do_cramfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) struct mtdids id; ulong addr; - addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16); + addr = simple_strtoul(env_get("cramfsaddr"), NULL, 16); /* hack! */ /* cramfs_* only supports NOR flash chips */ @@ -148,7 +148,7 @@ int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned long addr; /* Address of the ELF image */ unsigned long rc; /* Return value from user code */ char *sload = NULL; - const char *ep = getenv("autostart"); + const char *ep = env_get("autostart"); int rcode = 0; /* Consume 'bootelf' */ @@ -242,11 +242,11 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) */ #if defined(CONFIG_WALNUT) tmp = (char *)CONFIG_SYS_NVRAM_BASE_ADDR + 0x500; - eth_getenv_enetaddr("ethaddr", (uchar *)build_buf); + eth_env_get_enetaddr("ethaddr", (uchar *)build_buf); memcpy(tmp, &build_buf[3], 3); #elif defined(CONFIG_SYS_VXWORKS_MAC_PTR) tmp = (char *)CONFIG_SYS_VXWORKS_MAC_PTR; - eth_getenv_enetaddr("ethaddr", (uchar *)build_buf); + eth_env_get_enetaddr("ethaddr", (uchar *)build_buf); memcpy(tmp, build_buf, 6); #else puts("## Ethernet MAC address not copied to NV RAM\n"); @@ -258,7 +258,7 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * (LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET) as defined by * VxWorks BSP. For example, on PowerPC it defaults to 0x4200. */ - tmp = getenv("bootaddr"); + tmp = env_get("bootaddr"); if (!tmp) { printf("## VxWorks bootline address not specified\n"); } else { @@ -269,21 +269,21 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * parameter. If it is not defined, we may be able to * construct the info. */ - bootline = getenv("bootargs"); + bootline = env_get("bootargs"); if (bootline) { memcpy((void *)bootaddr, bootline, max(strlen(bootline), (size_t)255)); flush_cache(bootaddr, max(strlen(bootline), (size_t)255)); } else { - tmp = getenv("bootdev"); + tmp = env_get("bootdev"); if (tmp) { strcpy(build_buf, tmp); ptr = strlen(tmp); } else printf("## VxWorks boot device not specified\n"); - tmp = getenv("bootfile"); + tmp = env_get("bootfile"); if (tmp) ptr += sprintf(build_buf + ptr, "host:%s ", tmp); @@ -295,12 +295,12 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * The following parameters are only needed if 'bootdev' * is an ethernet device, otherwise they are optional. */ - tmp = getenv("ipaddr"); + tmp = env_get("ipaddr"); if (tmp) { ptr += sprintf(build_buf + ptr, "e=%s", tmp); - tmp = getenv("netmask"); + tmp = env_get("netmask"); if (tmp) { - u32 mask = getenv_ip("netmask").s_addr; + u32 mask = env_get_ip("netmask").s_addr; ptr += sprintf(build_buf + ptr, ":%08x ", ntohl(mask)); } else { @@ -308,19 +308,19 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } } - tmp = getenv("serverip"); + tmp = env_get("serverip"); if (tmp) ptr += sprintf(build_buf + ptr, "h=%s ", tmp); - tmp = getenv("gatewayip"); + tmp = env_get("gatewayip"); if (tmp) ptr += sprintf(build_buf + ptr, "g=%s ", tmp); - tmp = getenv("hostname"); + tmp = env_get("hostname"); if (tmp) ptr += sprintf(build_buf + ptr, "tn=%s ", tmp); - tmp = getenv("othbootargs"); + tmp = env_get("othbootargs"); if (tmp) { strcpy(build_buf + ptr, tmp); ptr += strlen(tmp); @@ -341,12 +341,12 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Since E820 information is critical to the kernel, if we don't * specify these in the environments, use a default one. */ - tmp = getenv("e820data"); + tmp = env_get("e820data"); if (tmp) data = (struct e820entry *)simple_strtoul(tmp, NULL, 16); else data = (struct e820entry *)VXWORKS_E820_DATA_ADDR; - tmp = getenv("e820info"); + tmp = env_get("e820info"); if (tmp) info = (struct e820info *)simple_strtoul(tmp, NULL, 16); else diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig index 89b9e73440..b84529a374 100644 --- a/cmd/fastboot/Kconfig +++ b/cmd/fastboot/Kconfig @@ -18,6 +18,8 @@ config CMD_FASTBOOT protocol for downloading images, flashing and device control used on Android devices. + See doc/README.android-fastboot for more information. + config ANDROID_BOOT_IMAGE bool "Enable support for Android Boot Images" help @@ -43,21 +43,21 @@ void set_working_fdt_addr(ulong addr) buf = map_sysmem(addr, 0); working_fdt = buf; - setenv_hex("fdtaddr", addr); + env_set_hex("fdtaddr", addr); } /* * Get a value from the fdt and format it to be set in the environment */ -static int fdt_value_setenv(const void *nodep, int len, const char *var) +static int fdt_value_env_set(const void *nodep, int len, const char *var) { if (is_printable_string(nodep, len)) - setenv(var, (void *)nodep); + env_set(var, (void *)nodep); else if (len == 4) { char buf[11]; sprintf(buf, "0x%08X", fdt32_to_cpu(*(fdt32_t *)nodep)); - setenv(var, buf); + env_set(var, buf); } else if (len%4 == 0 && len <= 20) { /* Needed to print things like sha1 hashes. */ char buf[41]; @@ -66,7 +66,7 @@ static int fdt_value_setenv(const void *nodep, int len, const char *var) for (i = 0; i < len; i += sizeof(unsigned int)) sprintf(buf + (i * 2), "%08x", *(unsigned int *)(nodep + i)); - setenv(var, buf); + env_set(var, buf); } else { printf("error: unprintable value\n"); return 1; @@ -111,7 +111,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; printf("The address of the fdt is %#08lx\n", control ? (ulong)map_to_sysmem(blob) : - getenv_hex("fdtaddr", 0)); + env_get_hex("fdtaddr", 0)); return 0; } @@ -358,10 +358,12 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (curDepth == startDepth + 1) curIndex++; if (subcmd[0] == 'n' && curIndex == reqIndex) { - const char *nodeName = fdt_get_name( - working_fdt, nextNodeOffset, NULL); + const char *node_name; - setenv(var, (char *)nodeName); + node_name = fdt_get_name(working_fdt, + nextNodeOffset, + NULL); + env_set(var, node_name); return 0; } nextNodeOffset = fdt_next_node( @@ -371,7 +373,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (subcmd[0] == 's') { /* get the num nodes at this level */ - setenv_ulong(var, curIndex + 1); + env_set_ulong(var, curIndex + 1); } else { /* node index not found */ printf("libfdt node not found\n"); @@ -382,13 +384,14 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) working_fdt, nodeoffset, prop, &len); if (len == 0) { /* no property value */ - setenv(var, ""); + env_set(var, ""); return 0; } else if (nodep && len > 0) { if (subcmd[0] == 'v') { int ret; - ret = fdt_value_setenv(nodep, len, var); + ret = fdt_value_env_set(nodep, len, + var); if (ret != 0) return ret; } else if (subcmd[0] == 'a') { @@ -396,13 +399,13 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char buf[11]; sprintf(buf, "0x%p", nodep); - setenv(var, buf); + env_set(var, buf); } else if (subcmd[0] == 's') { /* Get size */ char buf[11]; sprintf(buf, "0x%08X", len); - setenv(var, buf); + env_set(var, buf); } else return CMD_RET_USAGE; return 0; diff --git a/cmd/fpga.c b/cmd/fpga.c index 016349f560..ac6f504140 100644 --- a/cmd/fpga.c +++ b/cmd/fpga.c @@ -43,8 +43,8 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) int op, dev = FPGA_INVALID_DEVICE; size_t data_size = 0; void *fpga_data = NULL; - char *devstr = getenv("fpga"); - char *datastr = getenv("fpgadata"); + char *devstr = env_get("fpga"); + char *datastr = env_get("fpgadata"); int rc = FPGA_FAIL; int wrong_parms = 0; #if defined(CONFIG_FIT) @@ -55,14 +55,14 @@ static int extract_env(const char *str, char **env) memset(s + strlen(s) - 1, '\0', 1); memmove(s, s + 2, strlen(s) - 1); - e = getenv(s); + e = env_get(s); if (e == NULL) { #ifdef CONFIG_RANDOM_UUID debug("%s unset. ", str); gen_rand_uuid_str(uuid_str, UUID_STR_FORMAT_GUID); - setenv(s, uuid_str); + env_set(s, uuid_str); - e = getenv(s); + e = env_get(s); if (e) { debug("Set to random.\n"); ret = 0; @@ -626,7 +626,7 @@ static int do_disk_guid(struct blk_desc *dev_desc, char * const namestr) return CMD_RET_FAILURE; if (namestr) - setenv(namestr, disk_guid); + env_set(namestr, disk_guid); else printf("%s\n", disk_guid); @@ -219,7 +219,7 @@ static int ini_handler(void *user, char *section, char *name, char *value) for (i = 0; i < strlen(value); i++) value[i] = tolower(value[i]); #endif - setenv(name, value); + env_set(name, value); printf("ini: Imported %s as %s\n", name, value); } @@ -238,9 +238,9 @@ static int do_ini(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) section = argv[1]; file_address = (char *)simple_strtoul( - argc < 3 ? getenv("loadaddr") : argv[2], NULL, 16); + argc < 3 ? env_get("loadaddr") : argv[2], NULL, 16); file_size = (size_t)simple_strtoul( - argc < 4 ? getenv("filesize") : argv[3], NULL, 16); + argc < 4 ? env_get("filesize") : argv[3], NULL, 16); return ini_parse(file_address, file_size, ini_handler, (void *)section); } diff --git a/cmd/itest.c b/cmd/itest.c index e1896d9f97..70db04a04f 100644 --- a/cmd/itest.c +++ b/cmd/itest.c @@ -101,7 +101,7 @@ static char * evalstr(char *s) i++; } s[i] = 0; - return getenv((const char *)&s[2]); + return env_get((const char *)&s[2]); } else { return s; } diff --git a/cmd/jffs2.c b/cmd/jffs2.c index dc94705ccd..aee2f4513d 100644 --- a/cmd/jffs2.c +++ b/cmd/jffs2.c @@ -479,9 +479,9 @@ int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong offset = load_addr; /* pre-set Boot file name */ - if ((filename = getenv("bootfile")) == NULL) { + filename = env_get("bootfile"); + if (!filename) filename = "uImage"; - } if (argc == 2) { filename = argv[1]; @@ -512,7 +512,7 @@ int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (size > 0) { printf("### %s load complete: %d bytes loaded to 0x%lx\n", fsname, size, offset); - setenv_hex("filesize", size); + env_set_hex("filesize", size); } else { printf("### %s LOAD ERROR<%x> for %s!\n", fsname, size, filename); } diff --git a/cmd/load.c b/cmd/load.c index 4597ec5618..519c309a61 100644 --- a/cmd/load.c +++ b/cmd/load.c @@ -50,11 +50,11 @@ static int do_load_serial(cmd_tbl_t *cmdtp, int flag, int argc, load_baudrate = current_baudrate = gd->baudrate; #endif - if (((env_echo = getenv("loads_echo")) != NULL) && (*env_echo == '1')) { + env_echo = env_get("loads_echo"); + if (env_echo && *env_echo == '1') do_echo = 1; - } else { + else do_echo = 0; - } #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE if (argc >= 2) { @@ -182,7 +182,7 @@ static ulong load_serial(long offset) start_addr, end_addr, size, size ); flush_cache(start_addr, size); - setenv_hex("filesize", size); + env_set_hex("filesize", size); return (addr); case SREC_START: break; @@ -427,9 +427,9 @@ static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc, offset = CONFIG_SYS_LOAD_ADDR; /* pre-set offset from $loadaddr */ - if ((s = getenv("loadaddr")) != NULL) { + s = env_get("loadaddr"); + if (s) offset = simple_strtoul(s, NULL, 16); - } load_baudrate = current_baudrate = gd->baudrate; @@ -529,7 +529,7 @@ static ulong load_serial_bin(ulong offset) flush_cache(offset, size); printf("## Total Size = 0x%08x = %d Bytes\n", size, size); - setenv_hex("filesize", size); + env_set_hex("filesize", size); return offset; } @@ -1000,7 +1000,7 @@ static ulong load_serial_ymodem(ulong offset, int mode) flush_cache(offset, ALIGN(size, ARCH_DMA_MINALIGN)); printf("## Total Size = 0x%08x = %d Bytes\n", size, size); - setenv_hex("filesize", size); + env_set_hex("filesize", size); return offset; } @@ -71,7 +71,8 @@ void logbuff_init_ptrs(void) #endif /* Set up log version */ - if ((s = getenv ("logversion")) != NULL) + s = env_get("logversion"); + if (s) log_version = (int)simple_strtoul(s, NULL, 10); if (log_version == 2) @@ -94,7 +95,8 @@ void logbuff_init_ptrs(void) log->v2.start = log->v2.con; /* Initialize default loglevel if present */ - if ((s = getenv ("loglevel")) != NULL) + s = env_get("loglevel"); + if (s) console_loglevel = (int)simple_strtoul(s, NULL, 10); gd->flags |= GD_FLG_LOGINIT; diff --git a/cmd/lzmadec.c b/cmd/lzmadec.c index c78df825e8..1b482edb58 100644 --- a/cmd/lzmadec.c +++ b/cmd/lzmadec.c @@ -42,7 +42,7 @@ static int do_lzmadec(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) return 1; printf("Uncompressed size: %ld = %#lX\n", (ulong)src_len, (ulong)src_len); - setenv_hex("filesize", src_len); + env_set_hex("filesize", src_len); return 0; } diff --git a/cmd/md5sum.c b/cmd/md5sum.c index 23bb81e88c..c737cb23b5 100644 --- a/cmd/md5sum.c +++ b/cmd/md5sum.c @@ -35,7 +35,7 @@ static void store_result(const u8 *sum, const char *dest) sprintf(str_ptr, "%02x", sum[i]); str_ptr += 2; } - setenv(dest, str_output); + env_set(dest, str_output); } } @@ -54,7 +54,7 @@ static int parse_verify_sum(char *verify_str, u8 *vsum) if (strlen(verify_str) == 32) vsum_str = verify_str; else { - vsum_str = getenv(verify_str); + vsum_str = env_get(verify_str); if (vsum_str == NULL || strlen(vsum_str) != 32) return 1; } diff --git a/cmd/mtdparts.c b/cmd/mtdparts.c index 683c48bdad..615aa7459a 100644 --- a/cmd/mtdparts.c +++ b/cmd/mtdparts.c @@ -239,19 +239,19 @@ static void index_partitions(void) dev = list_entry(dentry, struct mtd_device, link); if (dev == current_mtd_dev) { mtddevnum += current_mtd_partnum; - setenv_ulong("mtddevnum", mtddevnum); + env_set_ulong("mtddevnum", mtddevnum); break; } mtddevnum += dev->num_parts; } part = mtd_part_info(current_mtd_dev, current_mtd_partnum); - setenv("mtddevname", part->name); + env_set("mtddevname", part->name); debug("=> mtddevnum %d,\n=> mtddevname %s\n", mtddevnum, part->name); } else { - setenv("mtddevnum", NULL); - setenv("mtddevname", NULL); + env_set("mtddevnum", NULL); + env_set("mtddevname", NULL); debug("=> mtddevnum NULL\n=> mtddevname NULL\n"); } @@ -270,12 +270,12 @@ static void current_save(void) sprintf(buf, "%s%d,%d", MTD_DEV_TYPE(current_mtd_dev->id->type), current_mtd_dev->id->num, current_mtd_partnum); - setenv("partition", buf); + env_set("partition", buf); strncpy(last_partition, buf, 16); debug("=> partition %s\n", buf); } else { - setenv("partition", NULL); + env_set("partition", NULL); last_partition[0] = '\0'; debug("=> partition NULL\n"); @@ -1213,9 +1213,9 @@ static int generate_mtdparts_save(char *buf, u32 buflen) ret = generate_mtdparts(buf, buflen); if ((buf[0] != '\0') && (ret == 0)) - setenv("mtdparts", buf); + env_set("mtdparts", buf); else - setenv("mtdparts", NULL); + env_set("mtdparts", NULL); return ret; } @@ -1533,11 +1533,11 @@ static int spread_partitions(void) * @param buf temporary buffer pointer MTDPARTS_MAXLEN long * @return mtdparts variable string, NULL if not found */ -static const char *getenv_mtdparts(char *buf) +static const char *env_get_mtdparts(char *buf) { if (gd->flags & GD_FLG_ENV_READY) - return getenv("mtdparts"); - if (getenv_f("mtdparts", buf, MTDPARTS_MAXLEN) != -1) + return env_get("mtdparts"); + if (env_get_f("mtdparts", buf, MTDPARTS_MAXLEN) != -1) return buf; return NULL; } @@ -1565,7 +1565,7 @@ static int parse_mtdparts(const char *const mtdparts) } /* re-read 'mtdparts' variable, mtd_devices_init may be updating env */ - p = getenv_mtdparts(tmp_parts); + p = env_get_mtdparts(tmp_parts); if (!p) p = mtdparts; @@ -1741,9 +1741,9 @@ int mtdparts_init(void) } /* get variables */ - ids = getenv("mtdids"); - parts = getenv_mtdparts(tmp_parts); - current_partition = getenv("partition"); + ids = env_get("mtdids"); + parts = env_get_mtdparts(tmp_parts); + current_partition = env_get("partition"); /* save it for later parsing, cannot rely on current partition pointer * as 'partition' variable may be updated during init */ @@ -1764,7 +1764,7 @@ int mtdparts_init(void) if (mtdids_default) { debug("mtdids variable not defined, using default\n"); ids = mtdids_default; - setenv("mtdids", (char *)ids); + env_set("mtdids", (char *)ids); } else { printf("mtdids not defined, no default present\n"); return 1; @@ -1780,7 +1780,7 @@ int mtdparts_init(void) if (!parts) { if (mtdparts_default && use_defaults) { parts = mtdparts_default; - if (setenv("mtdparts", (char *)parts) == 0) + if (env_set("mtdparts", (char *)parts) == 0) use_defaults = 0; } else printf("mtdparts variable not set, see 'help mtdparts'\n"); @@ -1850,7 +1850,7 @@ int mtdparts_init(void) current_mtd_partnum = pnum; current_save(); } - } else if (getenv("partition") == NULL) { + } else if (env_get("partition") == NULL) { debug("no partition variable set, setting...\n"); current_save(); } @@ -1956,9 +1956,9 @@ static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, { if (argc == 2) { if (strcmp(argv[1], "default") == 0) { - setenv("mtdids", NULL); - setenv("mtdparts", NULL); - setenv("partition", NULL); + env_set("mtdids", NULL); + env_set("mtdparts", NULL); + env_set("partition", NULL); use_defaults = 1; mtdparts_init(); @@ -1967,7 +1967,7 @@ static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, /* this may be the first run, initialize lists if needed */ mtdparts_init(); - setenv("mtdparts", NULL); + env_set("mtdparts", NULL); /* mtd_devices_init() calls current_save() */ return mtd_devices_init(); diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c index ea46e7b108..a1997ac0d3 100644 --- a/cmd/mvebu/bubt.c +++ b/cmd/mvebu/bubt.c @@ -98,7 +98,7 @@ static ulong get_load_addr(void) const char *addr_str; unsigned long addr; - addr_str = getenv("loadaddr"); + addr_str = env_get("loadaddr"); if (addr_str) addr = simple_strtoul(addr_str, NULL, 16); else diff --git a/cmd/nand.c b/cmd/nand.c index a2152ec826..a22945d144 100644 --- a/cmd/nand.c +++ b/cmd/nand.c @@ -305,9 +305,9 @@ static void nand_print_and_set_info(int idx) printf(" bbt options 0x%08x\n", chip->bbt_options); /* Set geometry info */ - setenv_hex("nand_writesize", mtd->writesize); - setenv_hex("nand_oobsize", mtd->oobsize); - setenv_hex("nand_erasesize", mtd->erasesize); + env_set_hex("nand_writesize", mtd->writesize); + env_set_hex("nand_oobsize", mtd->oobsize); + env_set_hex("nand_erasesize", mtd->erasesize); } static int raw_access(struct mtd_info *mtd, ulong addr, loff_t off, @@ -383,7 +383,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #else int quiet = 0; #endif - const char *quiet_str = getenv("quiet"); + const char *quiet_str = env_get("quiet"); int dev = nand_curr_device; int repeat = flag & CMD_FLAG_REPEAT; @@ -966,11 +966,11 @@ static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc, switch (argc) { case 1: addr = CONFIG_SYS_LOAD_ADDR; - boot_device = getenv("bootdevice"); + boot_device = env_get("bootdevice"); break; case 2: addr = simple_strtoul(argv[1], NULL, 16); - boot_device = getenv("bootdevice"); + boot_device = env_get("bootdevice"); break; case 3: addr = simple_strtoul(argv[1], NULL, 16); @@ -116,23 +116,23 @@ static void netboot_update_env(void) if (net_gateway.s_addr) { ip_to_string(net_gateway, tmp); - setenv("gatewayip", tmp); + env_set("gatewayip", tmp); } if (net_netmask.s_addr) { ip_to_string(net_netmask, tmp); - setenv("netmask", tmp); + env_set("netmask", tmp); } if (net_hostname[0]) - setenv("hostname", net_hostname); + env_set("hostname", net_hostname); if (net_root_path[0]) - setenv("rootpath", net_root_path); + env_set("rootpath", net_root_path); if (net_ip.s_addr) { ip_to_string(net_ip, tmp); - setenv("ipaddr", tmp); + env_set("ipaddr", tmp); } #if !defined(CONFIG_BOOTP_SERVERIP) /* @@ -141,32 +141,32 @@ static void netboot_update_env(void) */ if (net_server_ip.s_addr) { ip_to_string(net_server_ip, tmp); - setenv("serverip", tmp); + env_set("serverip", tmp); } #endif if (net_dns_server.s_addr) { ip_to_string(net_dns_server, tmp); - setenv("dnsip", tmp); + env_set("dnsip", tmp); } #if defined(CONFIG_BOOTP_DNS2) if (net_dns_server2.s_addr) { ip_to_string(net_dns_server2, tmp); - setenv("dnsip2", tmp); + env_set("dnsip2", tmp); } #endif if (net_nis_domain[0]) - setenv("domain", net_nis_domain); + env_set("domain", net_nis_domain); #if defined(CONFIG_CMD_SNTP) && defined(CONFIG_BOOTP_TIMEOFFSET) if (net_ntp_time_offset) { sprintf(tmp, "%d", net_ntp_time_offset); - setenv("timeoffset", tmp); + env_set("timeoffset", tmp); } #endif #if defined(CONFIG_CMD_SNTP) && defined(CONFIG_BOOTP_NTPSERVER) if (net_ntp_server.s_addr) { ip_to_string(net_ntp_server, tmp); - setenv("ntpserverip", tmp); + env_set("ntpserverip", tmp); } #endif } @@ -181,7 +181,7 @@ static int netboot_common(enum proto_t proto, cmd_tbl_t *cmdtp, int argc, ulong addr; /* pre-set load_addr */ - s = getenv("loadaddr"); + s = env_get("loadaddr"); if (s != NULL) load_addr = simple_strtoul(s, NULL, 16); @@ -291,14 +291,14 @@ static void cdp_update_env(void) printf("CDP offered appliance VLAN %d\n", ntohs(cdp_appliance_vlan)); vlan_to_string(cdp_appliance_vlan, tmp); - setenv("vlan", tmp); + env_set("vlan", tmp); net_our_vlan = cdp_appliance_vlan; } if (cdp_native_vlan != htons(-1)) { printf("CDP offered native VLAN %d\n", ntohs(cdp_native_vlan)); vlan_to_string(cdp_native_vlan, tmp); - setenv("nvlan", tmp); + env_set("nvlan", tmp); net_native_vlan = cdp_native_vlan; } } @@ -331,7 +331,7 @@ int do_sntp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *toff; if (argc < 2) { - net_ntp_server = getenv_ip("ntpserverip"); + net_ntp_server = env_get_ip("ntpserverip"); if (net_ntp_server.s_addr == 0) { printf("ntpserverip not set\n"); return CMD_RET_FAILURE; @@ -344,7 +344,7 @@ int do_sntp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } } - toff = getenv("timeoffset"); + toff = env_get("timeoffset"); if (toff == NULL) net_ntp_time_offset = 0; else @@ -423,14 +423,14 @@ static int do_link_local(cmd_tbl_t *cmdtp, int flag, int argc, net_gateway.s_addr = 0; ip_to_string(net_gateway, tmp); - setenv("gatewayip", tmp); + env_set("gatewayip", tmp); ip_to_string(net_netmask, tmp); - setenv("netmask", tmp); + env_set("netmask", tmp); ip_to_string(net_ip, tmp); - setenv("ipaddr", tmp); - setenv("llipaddr", tmp); /* store this for next time */ + env_set("ipaddr", tmp); + env_set("llipaddr", tmp); /* store this for next time */ return CMD_RET_SUCCESS; } diff --git a/cmd/nvedit.c b/cmd/nvedit.c index cd17db6409..4033d90c8e 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -283,7 +283,7 @@ static int _do_env_set(int flag, int argc, char * const argv[], int env_flag) return 0; } -int setenv(const char *varname, const char *varvalue) +int env_set(const char *varname, const char *varvalue) { const char * const argv[4] = { "setenv", varname, varvalue, NULL }; @@ -304,12 +304,12 @@ int setenv(const char *varname, const char *varvalue) * @param value Value to set it to * @return 0 if ok, 1 on error */ -int setenv_ulong(const char *varname, ulong value) +int env_set_ulong(const char *varname, ulong value) { /* TODO: this should be unsigned */ char *str = simple_itoa(value); - return setenv(varname, str); + return env_set(varname, str); } /** @@ -319,21 +319,21 @@ int setenv_ulong(const char *varname, ulong value) * @param value Value to set it to * @return 0 if ok, 1 on error */ -int setenv_hex(const char *varname, ulong value) +int env_set_hex(const char *varname, ulong value) { char str[17]; sprintf(str, "%lx", value); - return setenv(varname, str); + return env_set(varname, str); } -ulong getenv_hex(const char *varname, ulong default_val) +ulong env_get_hex(const char *varname, ulong default_val) { const char *s; ulong value; char *endp; - s = getenv(varname); + s = env_get(varname); if (s) value = simple_strtoul(s, &endp, 16); if (!s || endp == s) @@ -594,7 +594,7 @@ static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, return 1; /* Set read buffer to initial value or empty sting */ - init_val = getenv(argv[1]); + init_val = env_get(argv[1]); if (init_val) snprintf(buffer, CONFIG_SYS_CBSIZE, "%s", init_val); else @@ -622,7 +622,7 @@ static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, * return address of storage for that variable, * or NULL if not found */ -char *getenv(const char *name) +char *env_get(const char *name) { if (gd->flags & GD_FLG_ENV_READY) { /* after import into hashtable */ ENTRY e, *ep; @@ -637,7 +637,7 @@ char *getenv(const char *name) } /* restricted capabilities before import */ - if (getenv_f(name, (char *)(gd->env_buf), sizeof(gd->env_buf)) > 0) + if (env_get_f(name, (char *)(gd->env_buf), sizeof(gd->env_buf)) > 0) return (char *)(gd->env_buf); return NULL; @@ -646,7 +646,7 @@ char *getenv(const char *name) /* * Look up variable from environment for restricted C runtime env. */ -int getenv_f(const char *name, char *buf, unsigned len) +int env_get_f(const char *name, char *buf, unsigned len) { int i, nxt; @@ -690,13 +690,13 @@ int getenv_f(const char *name, char *buf, unsigned len) * found * @return the decoded value, or default_val if not found */ -ulong getenv_ulong(const char *name, int base, ulong default_val) +ulong env_get_ulong(const char *name, int base, ulong default_val) { /* - * We can use getenv() here, even before relocation, since the + * We can use env_get() here, even before relocation, since the * environment variable value is an integer and thus short. */ - const char *str = getenv(name); + const char *str = env_get(name); return str ? simple_strtoul(str, NULL, base) : default_val; } @@ -706,9 +706,11 @@ ulong getenv_ulong(const char *name, int base, ulong default_val) static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - printf("Saving Environment to %s...\n", env_name_spec); + struct env_driver *env = env_driver_lookup_default(); - return saveenv() ? 1 : 0; + printf("Saving Environment to %s...\n", env->name); + + return env_save() ? 1 : 0; } U_BOOT_CMD( @@ -929,7 +931,7 @@ NXTARG: ; return 1; } sprintf(buf, "%zX", (size_t)len); - setenv("filesize", buf); + env_set("filesize", buf); return 0; } @@ -955,7 +957,7 @@ NXTARG: ; envp->flags = ACTIVE_FLAG; #endif } - setenv_hex("filesize", len + offsetof(env_t, data)); + env_set_hex("filesize", len + offsetof(env_t, data)); return 0; diff --git a/cmd/nvme.c b/cmd/nvme.c new file mode 100644 index 0000000000..e1ef95fdf3 --- /dev/null +++ b/cmd/nvme.c @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2017 NXP Semiconductors + * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <dm.h> +#include <nvme.h> +#include <part.h> +#include <linux/math64.h> + +static int nvme_curr_device; + +static int do_nvme_scan(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + int ret; + + ret = nvme_scan_namespace(); + if (ret) + return CMD_RET_FAILURE; + + return CMD_RET_SUCCESS; +} + +static int do_nvme_list(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + blk_list_devices(IF_TYPE_NVME); + + return CMD_RET_SUCCESS; +} + +static int do_nvme_info(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + int devnum; + struct udevice *udev; + int ret; + + if (argc > 1) + devnum = (int)simple_strtoul(argv[1], NULL, 10); + else + devnum = nvme_curr_device; + + ret = blk_get_device(IF_TYPE_NVME, devnum, &udev); + if (ret < 0) + return CMD_RET_FAILURE; + + nvme_print_info(udev); + + return CMD_RET_SUCCESS; +} + +static int do_nvme_device(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + if (argc > 1) { + int devnum = (int)simple_strtoul(argv[1], NULL, 10); + + if (!blk_show_device(IF_TYPE_NVME, devnum)) { + nvme_curr_device = devnum; + printf("... is now current device\n"); + } else { + return CMD_RET_FAILURE; + } + } else { + blk_show_device(IF_TYPE_NVME, nvme_curr_device); + } + + return CMD_RET_SUCCESS; +} + +static int do_nvme_part(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + if (argc > 1) { + int devnum = (int)simple_strtoul(argv[2], NULL, 10); + + if (blk_print_part_devnum(IF_TYPE_NVME, devnum)) { + printf("\nNVMe device %d not available\n", devnum); + return CMD_RET_FAILURE; + } + } else { + blk_print_part_devnum(IF_TYPE_NVME, nvme_curr_device); + } + + return CMD_RET_SUCCESS; +} + +static int do_nvme_read(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + unsigned long time; + if (argc != 4) + return CMD_RET_USAGE; + + ulong addr = simple_strtoul(argv[1], NULL, 16); + ulong cnt = simple_strtoul(argv[3], NULL, 16); + ulong n; + lbaint_t blk = simple_strtoul(argv[2], NULL, 16); + + printf("\nNVMe read: device %d block # " LBAFU " count %ld ... ", + nvme_curr_device, blk, cnt); + + time = get_timer(0); + n = blk_read_devnum(IF_TYPE_NVME, nvme_curr_device, blk, + cnt, (ulong *)addr); + time = get_timer(time); + + printf("read: %s\n", (n == cnt) ? "OK" : "ERROR"); + printf("%lu bytes read in %lu ms", cnt * 512, time); + if (time > 0) { + puts(" ("); + print_size(div_u64(cnt * 512, time) * 1000, "/s"); + puts(")"); + } + puts("\n"); + + return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; +} + +static int do_nvme_write(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + unsigned long time; + if (argc != 4) + return CMD_RET_USAGE; + + ulong addr = simple_strtoul(argv[1], NULL, 16); + ulong cnt = simple_strtoul(argv[3], NULL, 16); + ulong n; + lbaint_t blk = simple_strtoul(argv[2], NULL, 16); + + printf("\nNVMe write: device %d block # " LBAFU " count %ld ... ", + nvme_curr_device, blk, cnt); + + time = get_timer(0); + n = blk_write_devnum(IF_TYPE_NVME, nvme_curr_device, blk, + cnt, (ulong *)addr); + time = get_timer(time); + + printf("write: %s\n", (n == cnt) ? "OK" : "ERROR"); + printf("%lu bytes write in %lu ms", cnt * 512, time); + if (time > 0) { + puts(" ("); + print_size(div_u64(cnt * 512, time) * 1000, "/s"); + puts(")"); + } + puts("\n"); + + return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE; +} + +static cmd_tbl_t cmd_nvme[] = { + U_BOOT_CMD_MKENT(scan, 1, 1, do_nvme_scan, "", ""), + U_BOOT_CMD_MKENT(list, 1, 1, do_nvme_list, "", ""), + U_BOOT_CMD_MKENT(info, 2, 1, do_nvme_info, "", ""), + U_BOOT_CMD_MKENT(device, 2, 1, do_nvme_device, "", ""), + U_BOOT_CMD_MKENT(part, 2, 1, do_nvme_part, "", ""), + U_BOOT_CMD_MKENT(write, 4, 0, do_nvme_write, "", ""), + U_BOOT_CMD_MKENT(read, 4, 0, do_nvme_read, "", "") +}; + +static int do_nvmecops(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + cmd_tbl_t *cp; + + cp = find_cmd_tbl(argv[1], cmd_nvme, ARRAY_SIZE(cmd_nvme)); + + argc--; + argv++; + + if (cp == NULL || argc > cp->maxargs) + return CMD_RET_USAGE; + + if (flag == CMD_FLAG_REPEAT && !cp->repeatable) + return CMD_RET_SUCCESS; + + return cp->cmd(cmdtp, flag, argc, argv); +} + +U_BOOT_CMD( + nvme, 8, 1, do_nvmecops, + "NVM Express sub-system", + "\nnvme scan - scan NVMe blk devices\n" + "nvme list - show all available NVMe blk devices\n" + "nvme info [dev]- show current or a specific NVMe blk device\n" + "nvme device [dev] - show or set current device\n" + "nvme part [dev] - print partition table\n" + "nvme read addr blk# cnt\n" + "nvme write addr blk# cnt" +); diff --git a/cmd/part.c b/cmd/part.c index 8ba05984e4..746bf40b2d 100644 --- a/cmd/part.c +++ b/cmd/part.c @@ -38,7 +38,7 @@ static int do_part_uuid(int argc, char * const argv[]) return 1; if (argc > 2) - setenv(argv[2], info.uuid); + env_set(argv[2], info.uuid); else printf("%s\n", info.uuid); @@ -99,7 +99,7 @@ static int do_part_list(int argc, char * const argv[]) sprintf(t, "%s%x", str[0] ? " " : "", p); strcat(str, t); } - setenv(var, str); + env_set(var, str); return 0; } @@ -135,7 +135,7 @@ static int do_part_start(int argc, char * const argv[]) snprintf(buf, sizeof(buf), LBAF, info.start); if (argc > 3) - setenv(argv[3], buf); + env_set(argv[3], buf); else printf("%s\n", buf); @@ -169,7 +169,7 @@ static int do_part_size(int argc, char * const argv[]) snprintf(buf, sizeof(buf), LBAF, info.size); if (argc > 3) - setenv(argv[3], buf); + env_set(argv[3], buf); else printf("%s\n", buf); @@ -694,7 +694,7 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if ((bdf = get_pci_dev(argv[2])) == -1) return 1; break; -#if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) +#if defined(CONFIG_DM_PCI) case 'e': pci_init(); return 0; @@ -782,7 +782,7 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) static char pci_help_text[] = "[bus] [long]\n" " - short or long list of PCI devices on bus 'bus'\n" -#if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) +#if defined(CONFIG_DM_PCI) "pci enum\n" " - Enumerate PCI buses\n" #endif diff --git a/cmd/portio.c b/cmd/portio.c deleted file mode 100644 index bf3a99791c..0000000000 --- a/cmd/portio.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2003 - * Marc Singer, elf@buici.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Port I/O Functions - * - * Copied from FADS ROM, Dan Malek (dmalek@jlc.net) - */ - -#include <common.h> -#include <command.h> - -/* Display values from last command. - * Memory modify remembered values are different from display memory. - */ -static uint in_last_addr, in_last_size; -static uint out_last_addr, out_last_size, out_last_value; - - -int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - uint addr = out_last_addr; - uint size = out_last_size; - uint value = out_last_value; - - if (argc != 3) - return CMD_RET_USAGE; - - if ((flag & CMD_FLAG_REPEAT) == 0) { - /* - * New command specified. Check for a size specification. - * Defaults to long if no or incorrect specification. - */ - size = cmd_get_data_size (argv[0], 1); - addr = simple_strtoul (argv[1], NULL, 16); - value = simple_strtoul (argv[2], NULL, 16); - } -#if defined (CONFIG_X86) - - { - unsigned short port = addr; - - switch (size) { - default: - case 1: - { - unsigned char ch = value; - __asm__ volatile ("out %0, %%dx"::"a" (ch), "d" (port)); - } - break; - case 2: - { - unsigned short w = value; - __asm__ volatile ("out %0, %%dx"::"a" (w), "d" (port)); - } - break; - case 4: - __asm__ volatile ("out %0, %%dx"::"a" (value), "d" (port)); - - break; - } - } - -#endif /* CONFIG_X86 */ - - out_last_addr = addr; - out_last_size = size; - out_last_value = value; - - return 0; -} - -U_BOOT_CMD( - out, 3, 1, do_portio_out, - "write datum to IO port", - "[.b, .w, .l] port value\n - output to IO port" -); - -int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - uint addr = in_last_addr; - uint size = in_last_size; - - if (argc != 2) - return CMD_RET_USAGE; - - if ((flag & CMD_FLAG_REPEAT) == 0) { - /* - * New command specified. Check for a size specification. - * Defaults to long if no or incorrect specification. - */ - size = cmd_get_data_size (argv[0], 1); - addr = simple_strtoul (argv[1], NULL, 16); - } -#if defined (CONFIG_X86) - - { - unsigned short port = addr; - - switch (size) { - default: - case 1: - { - unsigned char ch; - __asm__ volatile ("in %%dx, %0":"=a" (ch):"d" (port)); - - printf (" %02x\n", ch); - } - break; - case 2: - { - unsigned short w; - __asm__ volatile ("in %%dx, %0":"=a" (w):"d" (port)); - - printf (" %04x\n", w); - } - break; - case 4: - { - unsigned long l; - __asm__ volatile ("in %%dx, %0":"=a" (l):"d" (port)); - - printf (" %08lx\n", l); - } - break; - } - } -#endif /* CONFIG_X86 */ - - in_last_addr = addr; - in_last_size = size; - - return 0; -} - -U_BOOT_CMD( - in, 2, 1, do_portio_in, - "read data from an IO port", - "[.b, .w, .l] port\n" - " - read datum from IO port" -); @@ -33,15 +33,15 @@ const char *pxe_default_paths[] = { static bool is_pxe; /* - * Like getenv, but prints an error if envvar isn't defined in the - * environment. It always returns what getenv does, so it can be used in - * place of getenv without changing error handling otherwise. + * Like env_get, but prints an error if envvar isn't defined in the + * environment. It always returns what env_get does, so it can be used in + * place of env_get without changing error handling otherwise. */ static char *from_env(const char *envvar) { char *ret; - ret = getenv(envvar); + ret = env_get(envvar); if (!ret) printf("missing environment variable: %s\n", envvar); @@ -70,8 +70,7 @@ static int format_mac_pxe(char *outbuf, size_t outbuf_len) return -EINVAL; } - if (!eth_getenv_enetaddr_by_index("eth", eth_get_dev_index(), - ethaddr)) + if (!eth_env_get_enetaddr_by_index("eth", eth_get_dev_index(), ethaddr)) return -ENOENT; sprintf(outbuf, "01-%02x-%02x-%02x-%02x-%02x-%02x", @@ -591,7 +590,7 @@ static int label_localboot(struct pxe_label *label) char bootargs[CONFIG_SYS_CBSIZE]; cli_simple_process_macros(label->append, bootargs); - setenv("bootargs", bootargs); + env_set("bootargs", bootargs); } debug("running: %s\n", localcmd); @@ -649,9 +648,9 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) } bootm_argv[2] = initrd_str; - strcpy(bootm_argv[2], getenv("ramdisk_addr_r")); + strcpy(bootm_argv[2], env_get("ramdisk_addr_r")); strcat(bootm_argv[2], ":"); - strcat(bootm_argv[2], getenv("filesize")); + strcat(bootm_argv[2], env_get("filesize")); } if (get_relfile_envaddr(cmdtp, label->kernel, "kernel_addr_r") < 0) { @@ -662,8 +661,8 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) if (label->ipappend & 0x1) { sprintf(ip_str, " ip=%s:%s:%s:%s", - getenv("ipaddr"), getenv("serverip"), - getenv("gatewayip"), getenv("netmask")); + env_get("ipaddr"), env_get("serverip"), + env_get("gatewayip"), env_get("netmask")); } #ifdef CONFIG_CMD_NET @@ -695,11 +694,11 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) strcat(bootargs, mac_str); cli_simple_process_macros(bootargs, finalbootargs); - setenv("bootargs", finalbootargs); + env_set("bootargs", finalbootargs); printf("append: %s\n", finalbootargs); } - bootm_argv[1] = getenv("kernel_addr_r"); + bootm_argv[1] = env_get("kernel_addr_r"); /* * fdt usage is optional: @@ -714,7 +713,7 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) * * Scenario 3: fdt blob is not available. */ - bootm_argv[3] = getenv("fdt_addr_r"); + bootm_argv[3] = env_get("fdt_addr_r"); /* if fdt label is defined then get fdt from server */ if (bootm_argv[3]) { @@ -726,7 +725,7 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) } else if (label->fdtdir) { char *f1, *f2, *f3, *f4, *slash; - f1 = getenv("fdtfile"); + f1 = env_get("fdtfile"); if (f1) { f2 = ""; f3 = ""; @@ -739,9 +738,9 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) * or the boot scripts should set $fdtfile * before invoking "pxe" or "sysboot". */ - f1 = getenv("soc"); + f1 = env_get("soc"); f2 = "-"; - f3 = getenv("board"); + f3 = env_get("board"); f4 = ".dtb"; } @@ -781,7 +780,7 @@ static int label_boot(cmd_tbl_t *cmdtp, struct pxe_label *label) } if (!bootm_argv[3]) - bootm_argv[3] = getenv("fdt_addr"); + bootm_argv[3] = env_get("fdt_addr"); if (bootm_argv[3]) { if (!bootm_argv[2]) @@ -1671,10 +1670,10 @@ static int do_sysboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (argc < 6) - filename = getenv("bootfile"); + filename = env_get("bootfile"); else { filename = argv[5]; - setenv("bootfile", filename); + env_set("bootfile", filename); } if (strstr(argv[3], "ext2")) @@ -55,7 +55,7 @@ static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr) * when invoking qemu), do not update bootargs */ if (*data_addr != '\0') { - if (setenv("bootargs", data_addr) < 0) + if (env_set("bootargs", data_addr) < 0) printf("warning: unable to change bootargs\n"); } } @@ -123,7 +123,7 @@ static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag, void *load_addr; void *initrd_addr; - env = getenv("loadaddr"); + env = env_get("loadaddr"); load_addr = env ? (void *)simple_strtoul(env, NULL, 16) : #ifdef CONFIG_LOADADDR @@ -132,7 +132,7 @@ static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag, NULL; #endif - env = getenv("ramdiskaddr"); + env = env_get("ramdiskaddr"); initrd_addr = env ? (void *)simple_strtoul(env, NULL, 16) : #ifdef CONFIG_RAMDISK_ADDR diff --git a/cmd/read.c b/cmd/read.c index 61d8ce73e4..ecf925426f 100644 --- a/cmd/read.c +++ b/cmd/read.c @@ -66,7 +66,7 @@ int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (blk_read(dev_desc, offset + blk, cnt, addr) < 0) { + if (blk_dread(dev_desc, offset + blk, cnt, addr) < 0) { printf("Error reading blocks\n"); return 1; } diff --git a/cmd/reiser.c b/cmd/reiser.c index 9c3e9e9e58..e10c7b9eba 100644 --- a/cmd/reiser.c +++ b/cmd/reiser.c @@ -88,18 +88,18 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 3: - addr_str = getenv("loadaddr"); + addr_str = env_get("loadaddr"); if (addr_str != NULL) { addr = simple_strtoul (addr_str, NULL, 16); } else { addr = CONFIG_SYS_LOAD_ADDR; } - filename = getenv ("bootfile"); + filename = env_get("bootfile"); count = 0; break; case 4: addr = simple_strtoul (argv[3], NULL, 16); - filename = getenv ("bootfile"); + filename = env_get("bootfile"); count = 0; break; case 5: @@ -157,7 +157,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) load_addr = addr; printf ("\n%ld bytes read\n", filelen); - setenv_hex("filesize", filelen); + env_set_hex("filesize", filelen); return filelen; } diff --git a/cmd/setexpr.c b/cmd/setexpr.c index e7194fc4f4..af210225f1 100644 --- a/cmd/setexpr.c +++ b/cmd/setexpr.c @@ -145,7 +145,7 @@ static int regex_sub(const char *name, } if (t == NULL) { - value = getenv(name); + value = env_get(name); if (value == NULL) { printf("## Error: variable \"%s\" not defined\n", name); @@ -282,11 +282,11 @@ static int regex_sub(const char *name, if (!global) break; } - debug("## FINAL (now setenv()) : %s\n", data); + debug("## FINAL (now env_set()) : %s\n", data); printf("%s=%s\n", name, data); - return setenv(name, data); + return env_set(name, data); } #endif @@ -314,7 +314,7 @@ static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* plain assignment: "setexpr name value" */ if (argc == 3) { - setenv_hex(argv[1], a); + env_set_hex(argv[1], a); return 0; } @@ -370,7 +370,7 @@ static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } - setenv_hex(argv[1], value); + env_set_hex(argv[1], value); return 0; } diff --git a/cmd/source.c b/cmd/source.c index 177f86bb54..a9831b6608 100644 --- a/cmd/source.c +++ b/cmd/source.c @@ -40,7 +40,7 @@ source (ulong addr, const char *fit_uname) size_t fit_len; #endif - verify = getenv_yesno ("verify"); + verify = env_get_yesno("verify"); buf = map_sysmem(addr, 0); switch (genimg_get_format(buf)) { @@ -231,7 +231,7 @@ static int type_string_write_vars(const char *type_str, uint8_t *data, default: return -1; } - if (setenv_ulong(*vars, value)) + if (env_set_ulong(*vars, value)) return -1; } @@ -624,7 +624,7 @@ static int do_tpm_load_key_by_sha1(cmd_tbl_t *cmdtp, int flag, int argc, char * &key_handle); if (!err) { printf("Key handle is 0x%x\n", key_handle); - setenv_hex("key_handle", key_handle); + env_set_hex("key_handle", key_handle); } return report_return_code(err); diff --git a/cmd/trace.c b/cmd/trace.c index 1a6d8c3047..a0a7dd1995 100644 --- a/cmd/trace.c +++ b/cmd/trace.c @@ -16,10 +16,10 @@ static int get_args(int argc, char * const argv[], char **buff, if (argc < 2) return -1; if (argc < 4) { - *buff_size = getenv_ulong("profsize", 16, 0); - *buff = map_sysmem(getenv_ulong("profbase", 16, 0), + *buff_size = env_get_ulong("profsize", 16, 0); + *buff = map_sysmem(env_get_ulong("profbase", 16, 0), *buff_size); - *buff_ptr = getenv_ulong("profoffset", 16, 0); + *buff_ptr = env_get_ulong("profoffset", 16, 0); } else { *buff_size = simple_strtoul(argv[3], NULL, 16); *buff = map_sysmem(simple_strtoul(argv[2], NULL, 16), @@ -46,9 +46,9 @@ static int create_func_list(int argc, char * const argv[]) used = min(avail, (size_t)needed); printf("Function trace dumped to %08lx, size %#zx\n", (ulong)map_to_sysmem(buff + buff_ptr), used); - setenv_hex("profbase", map_to_sysmem(buff)); - setenv_hex("profsize", buff_size); - setenv_hex("profoffset", buff_ptr + used); + env_set_hex("profbase", map_to_sysmem(buff)); + env_set_hex("profsize", buff_size); + env_set_hex("profoffset", buff_ptr + used); return 0; } @@ -71,9 +71,9 @@ static int create_call_list(int argc, char * const argv[]) printf("Call list dumped to %08lx, size %#zx\n", (ulong)map_to_sysmem(buff + buff_ptr), used); - setenv_hex("profbase", map_to_sysmem(buff)); - setenv_hex("profsize", buff_size); - setenv_hex("profoffset", buff_ptr + used); + env_set_hex("profbase", map_to_sysmem(buff)); + env_set_hex("profsize", buff_size); + env_set_hex("profoffset", buff_ptr + used); return 0; } diff --git a/cmd/unzip.c b/cmd/unzip.c index a8bcb1f529..94f883f92a 100644 --- a/cmd/unzip.c +++ b/cmd/unzip.c @@ -29,7 +29,7 @@ static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len); - setenv_hex("filesize", src_len); + env_set_hex("filesize", src_len); return 0; } diff --git a/cmd/ximg.c b/cmd/ximg.c index d033c15b62..21b5c37721 100644 --- a/cmd/ximg.c +++ b/cmd/ximg.c @@ -52,7 +52,7 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #endif uint8_t comp; - verify = getenv_yesno("verify"); + verify = env_get_yesno("verify"); if (argc > 1) { addr = simple_strtoul(argv[1], NULL, 16); @@ -251,8 +251,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) flush_cache(dest, len); - setenv_hex("fileaddr", data); - setenv_hex("filesize", len); + env_set_hex("fileaddr", data); + env_set_hex("filesize", len); return 0; } @@ -51,10 +51,10 @@ static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] count = 0; addr = simple_strtoul(argv[3], NULL, 16); - filename = getenv("bootfile"); + filename = env_get("bootfile"); switch (argc) { case 3: - addr_str = getenv("loadaddr"); + addr_str = env_get("loadaddr"); if (addr_str != NULL) addr = simple_strtoul(addr_str, NULL, 16); else @@ -115,7 +115,7 @@ static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] load_addr = addr; printf("%llu bytes read\n", zfile.size); - setenv_hex("filesize", zfile.size); + env_set_hex("filesize", zfile.size); return 0; } @@ -30,7 +30,7 @@ static int do_zip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; printf("Compressed size: %ld = 0x%lX\n", dst_len, dst_len); - setenv_hex("filesize", dst_len); + env_set_hex("filesize", dst_len); return 0; } diff --git a/common/Kconfig b/common/Kconfig index 098389185b..4d8cae9610 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -174,448 +174,6 @@ config SPI_BOOT endmenu -menu "Environment" - -config ENV_IS_IN_DATAFLASH - bool "Environment in dataflash" - depends on !CHAIN_OF_TRUST - help - Define this if you have a DataFlash memory device which you - want to use for the environment. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These three #defines specify the offset and size of the - environment area within the total memory of your DataFlash placed - at the specified address. - -config ENV_IS_IN_EEPROM - bool "Environment in EEPROM" - depends on !CHAIN_OF_TRUST - help - Use this if you have an EEPROM or similar serial access - device and a driver for it. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_SIZE: - - These two #defines specify the offset and size of the - environment area within the total memory of your EEPROM. - - - CONFIG_SYS_I2C_EEPROM_ADDR: - If defined, specified the chip address of the EEPROM device. - The default address is zero. - - - CONFIG_SYS_I2C_EEPROM_BUS: - If defined, specified the i2c bus of the EEPROM device. - - - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: - If defined, the number of bits used to address bytes in a - single page in the EEPROM device. A 64 byte page, for example - would require six bits. - - - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: - If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. - - - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: - The length in bytes of the EEPROM memory array address. Note - that this is NOT the chip address length! - - - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: - EEPROM chips that implement "address overflow" are ones - like Catalyst 24WC04/08/16 which has 9/10/11 bits of - address and the extra bits end up in the "chip address" bit - slots. This makes a 24WC08 (1Kbyte) chip look like four 256 - byte chips. - - Note that we consider the length of the address field to - still be one byte because the extra address bits are hidden - in the chip address. - - - CONFIG_SYS_EEPROM_SIZE: - The size in bytes of the EEPROM device. - - - CONFIG_ENV_EEPROM_IS_ON_I2C - define this, if you have I2C and SPI activated, and your - EEPROM, which holds the environment, is on the I2C bus. - - - CONFIG_I2C_ENV_EEPROM_BUS - if you have an Environment on an EEPROM reached over - I2C muxes, you can define here, how to reach this - EEPROM. For example: - - #define CONFIG_I2C_ENV_EEPROM_BUS 1 - - EEPROM which holds the environment, is reached over - a pca9547 i2c mux with address 0x70, channel 3. - -config ENV_IS_IN_FAT - bool "Environment is in a FAT filesystem" - depends on !CHAIN_OF_TRUST - select FAT_WRITE - help - Define this if you want to use the FAT file system for the environment. - - - - CONFIG_FAT_WRITE: - This must be enabled. Otherwise it cannot save the environment file. - -config ENV_IS_IN_FLASH - bool "Environment in flash memory" - depends on !CHAIN_OF_TRUST - help - Define this if you have a flash device which you want to use for the - environment. - - a) The environment occupies one whole flash sector, which is - "embedded" in the text segment with the U-Boot code. This - happens usually with "bottom boot sector" or "top boot - sector" type flash chips, which have several smaller - sectors at the start or the end. For instance, such a - layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In - such a case you would place the environment in one of the - 4 kB sectors - with U-Boot code before and after it. With - "top boot sector" type flash chips, you would put the - environment in one of the last sectors, leaving a gap - between U-Boot and the environment. - - CONFIG_ENV_OFFSET: - - Offset of environment data (variable area) to the - beginning of flash memory; for instance, with bottom boot - type flash chips the second sector can be used: the offset - for this sector is given here. - - CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. - - CONFIG_ENV_ADDR: - - This is just another way to specify the start address of - the flash sector containing the environment (instead of - CONFIG_ENV_OFFSET). - - CONFIG_ENV_SECT_SIZE: - - Size of the sector containing the environment. - - - b) Sometimes flash chips have few, equal sized, BIG sectors. - In such a case you don't want to spend a whole sector for - the environment. - - CONFIG_ENV_SIZE: - - If you use this in combination with CONFIG_ENV_IS_IN_FLASH - and CONFIG_ENV_SECT_SIZE, you can specify to use only a part - of this flash sector for the environment. This saves - memory for the RAM copy of the environment. - - It may also save flash memory if you decide to use this - when your environment is "embedded" within U-Boot code, - since then the remainder of the flash sector could be used - for U-Boot code. It should be pointed out that this is - STRONGLY DISCOURAGED from a robustness point of view: - updating the environment in flash makes it always - necessary to erase the WHOLE sector. If something goes - wrong before the contents has been restored from a copy in - RAM, your target system will be dead. - - CONFIG_ENV_ADDR_REDUND - CONFIG_ENV_SIZE_REDUND - - These settings describe a second storage area used to hold - a redundant copy of the environment data, so that there is - a valid backup copy in case there is a power failure during - a "saveenv" operation. - - BE CAREFUL! Any changes to the flash layout, and some changes to the - source code will make it necessary to adapt <board>/u-boot.lds* - accordingly! - -config ENV_IS_IN_MMC - bool "Environment in an MMC device" - depends on !CHAIN_OF_TRUST - default y if ARCH_SUNXI - help - Define this if you have an MMC device which you want to use for the - environment. - - CONFIG_SYS_MMC_ENV_DEV: - - Specifies which MMC device the environment is stored in. - - CONFIG_SYS_MMC_ENV_PART (optional): - - Specifies which MMC partition the environment is stored in. If not - set, defaults to partition 0, the user area. Common values might be - 1 (first MMC boot partition), 2 (second MMC boot partition). - - CONFIG_ENV_OFFSET: - CONFIG_ENV_SIZE: - - These two #defines specify the offset and size of the environment - area within the specified MMC device. - - If offset is positive (the usual case), it is treated as relative to - the start of the MMC partition. If offset is negative, it is treated - as relative to the end of the MMC partition. This can be useful if - your board may be fitted with different MMC devices, which have - different sizes for the MMC partitions, and you always want the - environment placed at the very end of the partition, to leave the - maximum possible space before it, to store other data. - - These two values are in units of bytes, but must be aligned to an - MMC sector boundary. - - CONFIG_ENV_OFFSET_REDUND (optional): - - Specifies a second storage area, of CONFIG_ENV_SIZE size, used to - hold a redundant copy of the environment data. This provides a - valid backup copy in case the other copy is corrupted, e.g. due - to a power failure during a "saveenv" operation. - - This value may also be positive or negative; this is handled in the - same way as CONFIG_ENV_OFFSET. - - This value is also in units of bytes, but must also be aligned to - an MMC sector boundary. - - CONFIG_ENV_SIZE_REDUND (optional): - - This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is - set. If this value is set, it must be set to the same value as - CONFIG_ENV_SIZE. - -config ENV_IS_IN_NAND - bool "Environment in a NAND device" - depends on !CHAIN_OF_TRUST - help - Define this if you have a NAND device which you want to use for the - environment. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_SIZE: - - These two #defines specify the offset and size of the environment - area within the first NAND device. CONFIG_ENV_OFFSET must be - aligned to an erase block boundary. - - - CONFIG_ENV_OFFSET_REDUND (optional): - - This setting describes a second storage area of CONFIG_ENV_SIZE - size used to hold a redundant copy of the environment data, so - that there is a valid backup copy in case there is a power failure - during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be - aligned to an erase block boundary. - - - CONFIG_ENV_RANGE (optional): - - Specifies the length of the region in which the environment - can be written. This should be a multiple of the NAND device's - block size. Specifying a range with more erase blocks than - are needed to hold CONFIG_ENV_SIZE allows bad blocks within - the range to be avoided. - - - CONFIG_ENV_OFFSET_OOB (optional): - - Enables support for dynamically retrieving the offset of the - environment from block zero's out-of-band data. The - "nand env.oob" command can be used to record this offset. - Currently, CONFIG_ENV_OFFSET_REDUND is not supported when - using CONFIG_ENV_OFFSET_OOB. - -config ENV_IS_IN_NVRAM - bool "Environment in a non-volatile RAM" - depends on !CHAIN_OF_TRUST - help - Define this if you have some non-volatile memory device - (NVRAM, battery buffered SRAM) which you want to use for the - environment. - - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These two #defines are used to determine the memory area you - want to use for environment. It is assumed that this memory - can just be read and written to, without any special - provision. - -config ENV_IS_IN_ONENAND - bool "Environment is in OneNAND" - depends on !CHAIN_OF_TRUST - help - Define this if you want to put your local device's environment in - OneNAND. - - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These two #defines are used to determine the device range you - want to use for environment. It is assumed that this memory - can just be read and written to, without any special - provision. - -config ENV_IS_IN_REMOTE - bool "Environment is in remove memory space" - depends on !CHAIN_OF_TRUST - help - Define this if you have a remote memory space which you - want to use for the local device's environment. - - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These two #defines specify the address and size of the - environment area within the remote memory space. The - local device can get the environment from remote memory - space by SRIO or PCIE links. - -config ENV_IS_IN_SPI_FLASH - bool "Environment is in SPI flash" - depends on !CHAIN_OF_TRUST - help - Define this if you have a SPI Flash memory device which you - want to use for the environment. - - - CONFIG_ENV_OFFSET: - - CONFIG_ENV_SIZE: - - These two #defines specify the offset and size of the - environment area within the SPI Flash. CONFIG_ENV_OFFSET must be - aligned to an erase sector boundary. - - - CONFIG_ENV_SECT_SIZE: - - Define the SPI flash's sector size. - - - CONFIG_ENV_OFFSET_REDUND (optional): - - This setting describes a second storage area of CONFIG_ENV_SIZE - size used to hold a redundant copy of the environment data, so - that there is a valid backup copy in case there is a power failure - during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be - aligned to an erase sector boundary. - - - CONFIG_ENV_SPI_BUS (optional): - - CONFIG_ENV_SPI_CS (optional): - - Define the SPI bus and chip select. If not defined they will be 0. - - - CONFIG_ENV_SPI_MAX_HZ (optional): - - Define the SPI max work clock. If not defined then use 1MHz. - - - CONFIG_ENV_SPI_MODE (optional): - - Define the SPI work mode. If not defined then use SPI_MODE_3. - -config ENV_IS_IN_UBI - bool "Environment in a UBI volume" - depends on !CHAIN_OF_TRUST - help - Define this if you have an UBI volume that you want to use for the - environment. This has the benefit of wear-leveling the environment - accesses, which is important on NAND. - - - CONFIG_ENV_UBI_PART: - - Define this to a string that is the mtd partition containing the UBI. - - - CONFIG_ENV_UBI_VOLUME: - - Define this to the name of the volume that you want to store the - environment in. - - - CONFIG_ENV_UBI_VOLUME_REDUND: - - Define this to the name of another volume to store a second copy of - the environment in. This will enable redundant environments in UBI. - It is assumed that both volumes are in the same MTD partition. - - - CONFIG_UBI_SILENCE_MSG - - CONFIG_UBIFS_SILENCE_MSG - - You will probably want to define these to avoid a really noisy system - when storing the env in UBI. - -config ENV_IS_NOWHERE - bool "Environment is not stored" - help - Define this if you don't want to or can't have an environment stored - on a storage medium - -config ENV_FAT_INTERFACE - string "Name of the block device for the environment" - depends on ENV_IS_IN_FAT - default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91 - help - Define this to a string that is the name of the block device. - -config ENV_FAT_DEVICE_AND_PART - string "Device and partition for where to store the environemt in FAT" - depends on ENV_IS_IN_FAT - default "0:1" if TI_COMMON_CMD_OPTIONS - default "0:auto" if ARCH_ZYNQMP - default "0" if ARCH_AT91 - help - Define this to a string to specify the partition of the device. It can - be as following: - - "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) - - "D:P": device D partition P. Error occurs if device D has no - partition table. - - "D:0": device D. - - "D" or "D:": device D partition 1 if device D has partition - table, or the whole device D if has no partition - table. - - "D:auto": first partition in device D with bootable flag set. - If none, first valid partition in device D. If no - partition table then means device D. - -config ENV_FAT_FILE - string "Name of the FAT file to use for the environemnt" - depends on ENV_IS_IN_FAT - default "uboot.env" - help - It's a string of the FAT file name. This file use to store the - environment. - -if ARCH_SUNXI - -config ENV_OFFSET - hex "Environment Offset" - depends on !ENV_IS_IN_UBI - depends on !ENV_IS_NOWHERE - default 0x88000 if ARCH_SUNXI - help - Offset from the start of the device (or partition) - -config ENV_SIZE - hex "Environment Size" - depends on !ENV_IS_NOWHERE - default 0x20000 if ARCH_SUNXI - help - Size of the environment storage area - -config ENV_UBI_PART - string "UBI partition name" - depends on ENV_IS_IN_UBI - help - MTD partition containing the UBI device - -config ENV_UBI_VOLUME - string "UBI volume name" - depends on ENV_IS_IN_UBI - help - Name of the volume that you want to store the environment in. - -endif - -endmenu - config BOOTDELAY int "delay in seconds before automatically booting" default 2 @@ -628,6 +186,22 @@ config BOOTDELAY See doc/README.autoboot for details. +config USE_BOOTARGS + bool "Enable boot arguments" + help + Provide boot arguments to bootm command. Boot arguments are specified + in CONFIG_BOOTARGS option. Enable this option to be able to specify + CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS + will be undefined and won't take any space in U-Boot image. + +config BOOTARGS + string "Boot arguments" + depends on USE_BOOTARGS + help + This can be used to pass arguments to the bootm command. The value of + CONFIG_BOOTARGS goes into the environment value "bootargs". Note that + this value will also override the "chosen" node in FDT blob. + menu "Console" config MENU diff --git a/common/Makefile b/common/Makefile index 60681c845c..1b56cf9a70 100644 --- a/common/Makefile +++ b/common/Makefile @@ -19,7 +19,7 @@ ifdef CONFIG_BOOT_RETRY_TIME obj-y += bootretry.o endif -# boards +# # boards obj-y += board_f.o obj-y += board_r.o obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o @@ -29,31 +29,8 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o obj-$(CONFIG_CMD_BOOTZ) += bootm.o bootm_os.o obj-$(CONFIG_CMD_BOOTI) += bootm.o bootm_os.o -# environment -obj-y += env_attr.o -obj-y += env_callback.o -obj-y += env_flags.o -obj-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o -obj-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o -extra-$(CONFIG_ENV_IS_EMBEDDED) += env_embedded.o -obj-$(CONFIG_ENV_IS_IN_EEPROM) += env_embedded.o -extra-$(CONFIG_ENV_IS_IN_FLASH) += env_embedded.o -obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_embedded.o -obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o -obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o -obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o -obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o -obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o -obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o -obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o -obj-$(CONFIG_ENV_IS_IN_SATA) += env_sata.o -obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o -obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o -obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o -obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o - obj-$(CONFIG_CMD_BEDBUG) += bedbug.o -obj-$(CONFIG_$(SPL_)OF_LIBFDT) += fdt_support.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_MII) += miiphyutil.o obj-$(CONFIG_CMD_MII) += miiphyutil.o @@ -92,37 +69,15 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu.o obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o -obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o -obj-$(CONFIG_SPL_OF_LIBFDT) += fdt_support.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o ifdef CONFIG_SPL_USB_HOST_SUPPORT obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o obj-$(CONFIG_USB_STORAGE) += usb_storage.o endif -# environment -ifdef CONFIG_TPL_BUILD -obj-$(CONFIG_TPL_ENV_SUPPORT) += env_attr.o -obj-$(CONFIG_TPL_ENV_SUPPORT) += env_flags.o -obj-$(CONFIG_TPL_ENV_SUPPORT) += env_callback.o -else -obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o -obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o -obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o -endif -ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),) -obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o -obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o -obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o -obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o -obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o -obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o -obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o -endif endif -#environment -obj-y += env_common.o #others obj-$(CONFIG_DDR_SPD) += ddr_spd.o obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o @@ -146,10 +101,10 @@ endif endif obj-y += image.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o -obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o -obj-$(CONFIG_$(SPL_)FIT) += image-fit.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o +obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o obj-$(CONFIG_FIT_EMBED) += boot_fit.o common_fit.o -obj-$(CONFIG_$(SPL_)FIT_SIGNATURE) += image-sig.o +obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += image-sig.o obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o obj-y += stdio.o @@ -175,5 +130,3 @@ obj-$(CONFIG_CMD_DFU) += dfu.o obj-y += command.o obj-y += s_record.o obj-y += xyzModem.o - -CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/common/autoboot.c b/common/autoboot.c index c52bad84a4..a011865028 100644 --- a/common/autoboot.c +++ b/common/autoboot.c @@ -50,7 +50,7 @@ static int slow_equals(u8 *a, u8 *b, int len) static int passwd_abort(uint64_t etime) { - const char *sha_env_str = getenv("bootstopkeysha256"); + const char *sha_env_str = env_get("bootstopkeysha256"); u8 sha_env[SHA256_SUM_LEN]; u8 sha[SHA256_SUM_LEN]; char presskey[MAX_DELAY_STOP_STR]; @@ -109,8 +109,8 @@ static int passwd_abort(uint64_t etime) int retry; } delaykey[] = { - { .str = getenv("bootdelaykey"), .retry = 1 }, - { .str = getenv("bootstopkey"), .retry = 0 }, + { .str = env_get("bootdelaykey"), .retry = 1 }, + { .str = env_get("bootstopkey"), .retry = 0 }, }; char presskey[MAX_DELAY_STOP_STR]; @@ -278,12 +278,12 @@ static void process_fdt_options(const void *blob) /* Add an env variable to point to a kernel payload, if available */ addr = fdtdec_get_config_int(gd->fdt_blob, "kernel-offset", 0); if (addr) - setenv_addr("kernaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr)); + env_set_addr("kernaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr)); /* Add an env variable to point to a root disk, if available */ addr = fdtdec_get_config_int(gd->fdt_blob, "rootdisk-offset", 0); if (addr) - setenv_addr("rootaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr)); + env_set_addr("rootaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr)); #endif /* CONFIG_OF_CONTROL && CONFIG_SYS_TEXT_BASE */ } @@ -300,11 +300,11 @@ const char *bootdelay_process(void) bootcount = bootcount_load(); bootcount++; bootcount_store(bootcount); - setenv_ulong("bootcount", bootcount); - bootlimit = getenv_ulong("bootlimit", 10, 0); + env_set_ulong("bootcount", bootcount); + bootlimit = env_get_ulong("bootlimit", 10, 0); #endif /* CONFIG_BOOTCOUNT_LIMIT */ - s = getenv("bootdelay"); + s = env_get("bootdelay"); bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY; #ifdef CONFIG_OF_CONTROL @@ -321,17 +321,17 @@ const char *bootdelay_process(void) #ifdef CONFIG_POST if (gd->flags & GD_FLG_POSTFAIL) { - s = getenv("failbootcmd"); + s = env_get("failbootcmd"); } else #endif /* CONFIG_POST */ #ifdef CONFIG_BOOTCOUNT_LIMIT if (bootlimit && (bootcount > bootlimit)) { printf("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n", (unsigned)bootlimit); - s = getenv("altbootcmd"); + s = env_get("altbootcmd"); } else #endif /* CONFIG_BOOTCOUNT_LIMIT */ - s = getenv("bootcmd"); + s = env_get("bootcmd"); process_fdt_options(gd->fdt_blob); stored_bootdelay = bootdelay; @@ -357,7 +357,7 @@ void autoboot_command(const char *s) #ifdef CONFIG_MENUKEY if (menukey == CONFIG_MENUKEY) { - s = getenv("menucmd"); + s = env_get("menucmd"); if (s) run_command_list(s, -1, 0); } diff --git a/common/board_f.c b/common/board_f.c index 5915e500ae..de5f398a0b 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -118,7 +118,7 @@ __weak void board_add_ram_info(int use_default) static int init_baud_rate(void) { - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + gd->baudrate = env_get_ulong("baudrate", 10, CONFIG_BAUDRATE); return 0; } @@ -324,7 +324,7 @@ static int reserve_pram(void) { ulong reg; - reg = getenv_ulong("pram", 10, CONFIG_PRAM); + reg = env_get_ulong("pram", 10, CONFIG_PRAM); gd->relocaddr -= (reg << 10); /* size is in kB */ debug("Reserving %ldk for protected RAM at %08lx\n", reg, gd->relocaddr); diff --git a/common/board_r.c b/common/board_r.c index 985aa95c2a..94697e7bc1 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -372,7 +372,7 @@ static int initr_flash(void) * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ - if (getenv_yesno("flashchecksum") == 1) { + if (env_get_yesno("flashchecksum") == 1) { printf(" CRC: %08X", crc32(0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)); @@ -486,11 +486,11 @@ static int initr_env(void) else set_default_env(NULL); #ifdef CONFIG_OF_CONTROL - setenv_addr("fdtcontroladdr", gd->fdt_blob); + env_set_addr("fdtcontroladdr", gd->fdt_blob); #endif /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); + load_addr = env_get_ulong("loadaddr", 16, load_addr); return 0; } @@ -537,21 +537,21 @@ static int initr_ethaddr(void) bd_t *bd = gd->bd; /* kept around for legacy kernels only ... ignore the next section */ - eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr); + eth_env_get_enetaddr("ethaddr", bd->bi_enetaddr); #ifdef CONFIG_HAS_ETH1 - eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr); + eth_env_get_enetaddr("eth1addr", bd->bi_enet1addr); #endif #ifdef CONFIG_HAS_ETH2 - eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr); + eth_env_get_enetaddr("eth2addr", bd->bi_enet2addr); #endif #ifdef CONFIG_HAS_ETH3 - eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr); + eth_env_get_enetaddr("eth3addr", bd->bi_enet3addr); #endif #ifdef CONFIG_HAS_ETH4 - eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr); + eth_env_get_enetaddr("eth4addr", bd->bi_enet4addr); #endif #ifdef CONFIG_HAS_ETH5 - eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr); + eth_env_get_enetaddr("eth5addr", bd->bi_enet5addr); #endif return 0; } @@ -651,14 +651,14 @@ int initr_mem(void) char memsz[32]; # ifdef CONFIG_PRAM - pram = getenv_ulong("pram", 10, CONFIG_PRAM); + pram = env_get_ulong("pram", 10, CONFIG_PRAM); # endif # if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR) /* Also take the logbuffer into account (pram is in kB) */ pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024; # endif sprintf(memsz, "%ldk", (long int) ((gd->ram_size / 1024) - pram)); - setenv("mem", memsz); + env_set("mem", memsz); return 0; } diff --git a/common/boot_fit.c b/common/boot_fit.c index 51440a6e6f..0a723150b5 100644 --- a/common/boot_fit.c +++ b/common/boot_fit.c @@ -25,7 +25,7 @@ int fdt_offset(void *fit) images = fdt_path_offset(fit, FIT_IMAGES_PATH); if (images < 0) { debug("%s: Cannot find /images node: %d\n", __func__, images); - return FDT_ERROR; + return -EINVAL; } fdt_name = fdt_getprop(fit, node, FIT_FDT_PROP, &fdt_len); diff --git a/common/bootm.c b/common/bootm.c index b2c09126ce..32b3ea8e2d 100644 --- a/common/bootm.c +++ b/common/bootm.c @@ -55,8 +55,8 @@ static void boot_start_lmb(bootm_headers_t *images) lmb_init(&images->lmb); - mem_start = getenv_bootm_low(); - mem_size = getenv_bootm_size(); + mem_start = env_get_bootm_low(); + mem_size = env_get_bootm_size(); lmb_add(&images->lmb, (phys_addr_t)mem_start, mem_size); @@ -72,7 +72,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { memset((void *)&images, 0, sizeof(images)); - images.verify = getenv_yesno("verify"); + images.verify = env_get_yesno("verify"); boot_start_lmb(&images); @@ -524,7 +524,7 @@ static void fixup_silent_linux(void) { char *buf; const char *env_val; - char *cmdline = getenv("bootargs"); + char *cmdline = env_get("bootargs"); int want_silent; /* @@ -534,7 +534,7 @@ static void fixup_silent_linux(void) * yes - we always fixup * unset - we rely on the console silent flag */ - want_silent = getenv_yesno("silent_linux"); + want_silent = env_get_yesno("silent_linux"); if (want_silent == 0) return; else if (want_silent == -1 && !(gd->flags & GD_FLG_SILENT)) @@ -569,7 +569,7 @@ static void fixup_silent_linux(void) env_val = CONSOLE_ARG; } - setenv("bootargs", env_val); + env_set("bootargs", env_val); debug("after silent fix-up: %s\n", env_val); free(buf); } @@ -645,8 +645,8 @@ int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], ret = boot_ramdisk_high(&images->lmb, images->rd_start, rd_len, &images->initrd_start, &images->initrd_end); if (!ret) { - setenv_hex("initrd_start", images->initrd_start); - setenv_hex("initrd_end", images->initrd_end); + env_set_hex("initrd_start", images->initrd_start); + env_set_hex("initrd_end", images->initrd_end); } } #endif @@ -691,7 +691,7 @@ int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], #ifdef CONFIG_TRACE /* Pretend to run the OS, then run a user command */ if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) { - char *cmd_list = getenv("fakegocmd"); + char *cmd_list = env_get("fakegocmd"); ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO, images, boot_fn); diff --git a/common/bootm_os.c b/common/bootm_os.c index d9e6e937f7..1feea8af17 100644 --- a/common/bootm_os.c +++ b/common/bootm_os.c @@ -21,9 +21,9 @@ static int do_bootm_standalone(int flag, int argc, char * const argv[], int (*appl)(int, char *const[]); /* Don't start if "autostart" is set to "no" */ - s = getenv("autostart"); + s = env_get("autostart"); if ((s != NULL) && !strcmp(s, "no")) { - setenv_hex("filesize", images->os.image_len); + env_set_hex("filesize", images->os.image_len); return 0; } appl = (int (*)(int, char * const []))images->ep; @@ -96,7 +96,7 @@ static int do_bootm_netbsd(int flag, int argc, char * const argv[], cmdline = malloc(len); copy_args(cmdline, argc, argv, ' '); } else { - cmdline = getenv("bootargs"); + cmdline = env_get("bootargs"); if (cmdline == NULL) cmdline = ""; } @@ -227,14 +227,14 @@ static int do_bootm_plan9(int flag, int argc, char * const argv[], #endif /* See README.plan9 */ - s = getenv("confaddr"); + s = env_get("confaddr"); if (s != NULL) { char *confaddr = (char *)simple_strtoul(s, NULL, 16); if (argc > 0) { copy_args(confaddr, argc, argv, '\n'); } else { - s = getenv("bootargs"); + s = env_get("bootargs"); if (s != NULL) strcpy(confaddr, s); } @@ -278,7 +278,7 @@ void do_bootvx_fdt(bootm_headers_t *images) ret = fdt_add_subnode(*of_flat_tree, 0, "chosen"); if ((ret >= 0 || ret == -FDT_ERR_EXISTS)) { - bootline = getenv("bootargs"); + bootline = env_get("bootargs"); if (bootline) { ret = fdt_find_and_setprop(*of_flat_tree, "/chosen", "bootargs", diff --git a/common/bootretry.c b/common/bootretry.c index 2d82798cd0..b3b8271a92 100644 --- a/common/bootretry.c +++ b/common/bootretry.c @@ -23,7 +23,7 @@ static int retry_time = -1; /* -1 so can call readline before main_loop */ */ void bootretry_init_cmd_timeout(void) { - char *s = getenv("bootretry"); + char *s = env_get("bootretry"); if (s != NULL) retry_time = (int)simple_strtol(s, NULL, 10); diff --git a/common/cli.c b/common/cli.c index a433ef2166..57874d8797 100644 --- a/common/cli.c +++ b/common/cli.c @@ -129,7 +129,7 @@ int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) for (i = 1; i < argc; ++i) { char *arg; - arg = getenv(argv[i]); + arg = env_get(argv[i]); if (arg == NULL) { printf("## Error: \"%s\" not defined\n", argv[i]); return 1; diff --git a/common/cli_hush.c b/common/cli_hush.c index 00861e2d9e..07c048ec6a 100644 --- a/common/cli_hush.c +++ b/common/cli_hush.c @@ -560,7 +560,7 @@ static int builtin_cd(struct child_prog *child) { char *newdir; if (child->argv[1] == NULL) - newdir = getenv("HOME"); + newdir = env_get("HOME"); else newdir = child->argv[1]; if (chdir(newdir)) { @@ -948,7 +948,7 @@ static inline void cmdedit_set_initial_prompt(void) #ifndef CONFIG_FEATURE_SH_FANCY_PROMPT PS1 = NULL; #else - PS1 = getenv("PS1"); + PS1 = env_get("PS1"); if(PS1==0) PS1 = "\\w \\$ "; #endif @@ -987,9 +987,9 @@ static int uboot_cli_readline(struct in_str *i) #ifdef CONFIG_CMDLINE_PS_SUPPORT if (i->promptmode == 1) - ps_prompt = getenv("PS1"); + ps_prompt = env_get("PS1"); else - ps_prompt = getenv("PS2"); + ps_prompt = env_get("PS2"); if (ps_prompt) prompt = ps_prompt; #endif @@ -2172,7 +2172,7 @@ int set_local_var(const char *s, int flg_export) name=strdup(s); #ifdef __U_BOOT__ - if (getenv(name) != NULL) { + if (env_get(name) != NULL) { printf ("ERROR: " "There is a global environment variable with the same name.\n"); free(name); @@ -2265,7 +2265,7 @@ void unset_local_var(const char *name) } else { #ifndef __U_BOOT__ if(cur->flg_export) - unsetenv(cur->name); + unenv_set(cur->name); #endif free(cur->name); free(cur->value); @@ -2793,7 +2793,7 @@ static char *lookup_param(char *src) } } - p = getenv(src); + p = env_get(src); if (!p) p = get_local_var(src); @@ -3157,7 +3157,7 @@ static void mapset(const unsigned char *set, int code) static void update_ifs_map(void) { /* char *ifs and char map[256] are both globals. */ - ifs = (uchar *)getenv("IFS"); + ifs = (uchar *)env_get("IFS"); if (ifs == NULL) ifs=(uchar *)" \t\n"; /* Precompute a list of 'flow through' behavior so it can be treated * quickly up front. Computation is necessary because of IFS. diff --git a/common/cli_simple.c b/common/cli_simple.c index bb96aaead6..cb642d2ff3 100644 --- a/common/cli_simple.c +++ b/common/cli_simple.c @@ -131,7 +131,7 @@ void cli_simple_process_macros(const char *input, char *output) envname[i] = 0; /* Get its value */ - envval = getenv(envname); + envval = env_get(envname); /* Copy into the line if it exists */ if (envval != NULL) @@ -168,7 +168,7 @@ void cli_simple_process_macros(const char *input, char *output) * WARNING: * * We must create a temporary copy of the command since the command we get - * may be the result from getenv(), which returns a pointer directly to + * may be the result from env_get(), which returns a pointer directly to * the environment data, which may change magicly when the command we run * creates or modifies environment variables (like "bootp" does). */ diff --git a/common/console.c b/common/console.c index ec4af3bd90..3167921ec9 100644 --- a/common/console.c +++ b/common/console.c @@ -666,7 +666,7 @@ int console_assign(int file, const char *devname) static void console_update_silent(void) { #ifdef CONFIG_SILENT_CONSOLE - if (getenv("silent") != NULL) + if (env_get("silent") != NULL) gd->flags |= GD_FLG_SILENT; else gd->flags &= ~GD_FLG_SILENT; @@ -745,9 +745,9 @@ int console_init_r(void) /* stdin stdout and stderr are in environment */ /* scan for it */ - stdinname = getenv("stdin"); - stdoutname = getenv("stdout"); - stderrname = getenv("stderr"); + stdinname = env_get("stdin"); + stdoutname = env_get("stdout"); + stderrname = env_get("stderr"); if (OVERWRITE_CONSOLE == 0) { /* if not overwritten by config switch */ inputdev = search_device(DEV_FLAGS_INPUT, stdinname); @@ -801,7 +801,7 @@ done: #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE /* set the environment variables (will overwrite previous env settings) */ for (i = 0; i < 3; i++) { - setenv(stdio_names[i], stdio_devices[i]->name); + env_set(stdio_names[i], stdio_devices[i]->name); } #endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */ @@ -836,7 +836,7 @@ int console_init_r(void) * console to serial console in this case or suppress it if * "silent" mode was requested. */ - if (getenv("splashimage") != NULL) { + if (env_get("splashimage") != NULL) { if (!(gd->flags & GD_FLG_SILENT)) outputdev = search_device (DEV_FLAGS_OUTPUT, "serial"); } @@ -880,7 +880,7 @@ int console_init_r(void) /* Setting environment variables */ for (i = 0; i < 3; i++) { - setenv(stdio_names[i], stdio_devices[i]->name); + env_set(stdio_names[i], stdio_devices[i]->name); } gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ diff --git a/common/fb_mmc.c b/common/fb_mmc.c index 2113b6c372..5065ad5f73 100644 --- a/common/fb_mmc.c +++ b/common/fb_mmc.c @@ -49,7 +49,7 @@ static int part_get_info_by_name_or_alias(struct blk_desc *dev_desc, /* check for alias */ strcpy(env_alias_name, "fastboot_partition_alias_"); strncat(env_alias_name, name, 32); - aliased_part_name = getenv(env_alias_name); + aliased_part_name = env_get(env_alias_name); if (aliased_part_name != NULL) ret = part_get_info_by_name(dev_desc, aliased_part_name, info); diff --git a/common/fdt_support.c b/common/fdt_support.c index 7ccf8b19fd..916a448c11 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -197,7 +197,7 @@ int fdt_root(void *fdt) return err; } - serial = getenv("serial#"); + serial = env_get("serial#"); if (serial) { err = fdt_setprop(fdt, 0, "serial-number", serial, strlen(serial) + 1); @@ -289,7 +289,7 @@ int fdt_chosen(void *fdt) if (nodeoffset < 0) return nodeoffset; - str = getenv("bootargs"); + str = env_get("bootargs"); if (str) { err = fdt_setprop(fdt, nodeoffset, "bootargs", str, strlen(str) + 1); @@ -509,7 +509,7 @@ void fdt_fixup_ethernet(void *fdt) } else { continue; } - tmp = getenv(mac); + tmp = env_get(mac); if (!tmp) continue; diff --git a/common/hash.c b/common/hash.c index 771d8fa87f..dcf016d8a7 100644 --- a/common/hash.c +++ b/common/hash.c @@ -302,7 +302,7 @@ static void store_result(struct hash_algo *algo, const uint8_t *sum, str_ptr += 2; } *str_ptr = '\0'; - setenv(dest, str_output); + env_set(dest, str_output); } else { ulong addr; void *buf; @@ -362,7 +362,7 @@ static int parse_verify_sum(struct hash_algo *algo, char *verify_str, if (strlen(verify_str) == digits) vsum_str = verify_str; else { - vsum_str = getenv(verify_str); + vsum_str = env_get(verify_str); if (vsum_str == NULL || strlen(vsum_str) != digits) { printf("Expected %d hex digits in env var\n", digits); diff --git a/common/hwconfig.c b/common/hwconfig.c index 4ae042ee33..e5186d7796 100644 --- a/common/hwconfig.c +++ b/common/hwconfig.c @@ -81,7 +81,7 @@ static const char *__hwconfig(const char *opt, size_t *arglen, "and before environment is ready\n"); return NULL; } - env_hwconfig = getenv("hwconfig"); + env_hwconfig = env_get("hwconfig"); } if (env_hwconfig) { @@ -243,7 +243,7 @@ int main() const char *ret; size_t len; - setenv("hwconfig", "key1:subkey1=value1,subkey2=value2;key2:value3;;;;" + env_set("hwconfig", "key1:subkey1=value1,subkey2=value2;key2:value3;;;;" "key3;:,:=;key4", 1); ret = hwconfig_arg("key1", &len); @@ -274,7 +274,7 @@ int main() assert(hwconfig_arg("key4", &len) == NULL); assert(hwconfig_arg("bogus", &len) == NULL); - unsetenv("hwconfig"); + unenv_set("hwconfig"); assert(hwconfig(NULL) == 0); assert(hwconfig("") == 0); diff --git a/common/image-android.c b/common/image-android.c index c668407817..e74d0aafca 100644 --- a/common/image-android.c +++ b/common/image-android.c @@ -72,7 +72,7 @@ int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, len += strlen(hdr->cmdline); } - char *bootargs = getenv("bootargs"); + char *bootargs = env_get("bootargs"); if (bootargs) len += strlen(bootargs); @@ -90,7 +90,7 @@ int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, if (*hdr->cmdline) strcat(newbootargs, hdr->cmdline); - setenv("bootargs", newbootargs); + env_set("bootargs", newbootargs); if (os_data) { *os_data = (ulong)hdr; diff --git a/common/image-fdt.c b/common/image-fdt.c index c6e8832d66..da4d007081 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -132,7 +132,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) of_len = *of_size + CONFIG_SYS_FDT_PAD; /* If fdt_high is set use it to select the relocation address */ - fdt_high = getenv("fdt_high"); + fdt_high = env_get("fdt_high"); if (fdt_high) { void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16); @@ -156,8 +156,8 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) } else { of_start = (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, - getenv_bootm_mapsize() - + getenv_bootm_low()); + env_get_bootm_mapsize() + + env_get_bootm_low()); } if (of_start == NULL) { diff --git a/common/image.c b/common/image.c index 0f88984f2d..a058eb85e1 100644 --- a/common/image.c +++ b/common/image.c @@ -465,9 +465,9 @@ static int on_loadaddr(const char *name, const char *value, enum env_op op, } U_BOOT_ENV_CALLBACK(loadaddr, on_loadaddr); -ulong getenv_bootm_low(void) +ulong env_get_bootm_low(void) { - char *s = getenv("bootm_low"); + char *s = env_get("bootm_low"); if (s) { ulong tmp = simple_strtoul(s, NULL, 16); return tmp; @@ -482,11 +482,11 @@ ulong getenv_bootm_low(void) #endif } -phys_size_t getenv_bootm_size(void) +phys_size_t env_get_bootm_size(void) { phys_size_t tmp, size; phys_addr_t start; - char *s = getenv("bootm_size"); + char *s = env_get("bootm_size"); if (s) { tmp = (phys_size_t)simple_strtoull(s, NULL, 16); return tmp; @@ -500,7 +500,7 @@ phys_size_t getenv_bootm_size(void) size = gd->bd->bi_memsize; #endif - s = getenv("bootm_low"); + s = env_get("bootm_low"); if (s) tmp = (phys_size_t)simple_strtoull(s, NULL, 16); else @@ -509,10 +509,10 @@ phys_size_t getenv_bootm_size(void) return size - (tmp - start); } -phys_size_t getenv_bootm_mapsize(void) +phys_size_t env_get_bootm_mapsize(void) { phys_size_t tmp; - char *s = getenv("bootm_mapsize"); + char *s = env_get("bootm_mapsize"); if (s) { tmp = (phys_size_t)simple_strtoull(s, NULL, 16); return tmp; @@ -521,7 +521,7 @@ phys_size_t getenv_bootm_mapsize(void) #if defined(CONFIG_SYS_BOOTMAPSZ) return CONFIG_SYS_BOOTMAPSZ; #else - return getenv_bootm_size(); + return env_get_bootm_size(); #endif } @@ -1224,7 +1224,8 @@ int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, ulong initrd_high; int initrd_copy_to_ram = 1; - if ((s = getenv("initrd_high")) != NULL) { + s = env_get("initrd_high"); + if (s) { /* a value of "no" or a similar string will act like 0, * turning the "load high" feature off. This is intentional. */ @@ -1232,7 +1233,7 @@ int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, if (initrd_high == ~0) initrd_copy_to_ram = 0; } else { - initrd_high = getenv_bootm_mapsize() + getenv_bootm_low(); + initrd_high = env_get_bootm_mapsize() + env_get_bootm_low(); } @@ -1505,7 +1506,7 @@ int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, * @cmd_end: pointer to a ulong variable, will hold cmdline end * * boot_get_cmdline() allocates space for kernel command line below - * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-Boot environemnt + * BOOTMAPSZ + env_get_bootm_low() address. If "bootargs" U-Boot environemnt * variable is present its contents is copied to allocated kernel * command line. * @@ -1519,12 +1520,13 @@ int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end) char *s; cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf, - getenv_bootm_mapsize() + getenv_bootm_low()); + env_get_bootm_mapsize() + env_get_bootm_low()); if (cmdline == NULL) return -1; - if ((s = getenv("bootargs")) == NULL) + s = env_get("bootargs"); + if (!s) s = ""; strcpy(cmdline, s); @@ -1545,7 +1547,7 @@ int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end) * @kbd: double pointer to board info data * * boot_get_kbd() allocates space for kernel copy of board info data below - * BOOTMAPSZ + getenv_bootm_low() address and kernel board info is initialized + * BOOTMAPSZ + env_get_bootm_low() address and kernel board info is initialized * with the current u-boot board info data. * * returns: @@ -1555,7 +1557,7 @@ int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end) int boot_get_kbd(struct lmb *lmb, bd_t **kbd) { *kbd = (bd_t *)(ulong)lmb_alloc_base(lmb, sizeof(bd_t), 0xf, - getenv_bootm_mapsize() + getenv_bootm_low()); + env_get_bootm_mapsize() + env_get_bootm_low()); if (*kbd == NULL) return -1; diff --git a/common/lcd.c b/common/lcd.c index 7e399cee2d..c3ff9599ed 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -223,7 +223,7 @@ void lcd_clear(void) /* Paint the logo and retrieve LCD base address */ debug("[LCD] Drawing the logo...\n"); if (do_splash) { - s = getenv("splashimage"); + s = env_get("splashimage"); if (s) { do_splash = 0; addr = simple_strtoul(s, NULL, 16); diff --git a/common/main.c b/common/main.c index 2116a9e0a2..6a1159879e 100644 --- a/common/main.c +++ b/common/main.c @@ -25,7 +25,7 @@ static void run_preboot_environment_command(void) #ifdef CONFIG_PREBOOT char *p; - p = getenv("preboot"); + p = env_get("preboot"); if (p != NULL) { # ifdef CONFIG_AUTOBOOT_KEYED int prev = disable_ctrlc(1); /* disable Control C checking */ @@ -48,7 +48,7 @@ void main_loop(void) bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop"); #ifdef CONFIG_VERSION_VARIABLE - setenv("ver", version_string); /* set version variable */ + env_set("ver", version_string); /* set version variable */ #endif /* CONFIG_VERSION_VARIABLE */ cli_init(); diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 4de81392b0..582b685dad 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -18,6 +18,16 @@ config SPL if SPL +config SPL_LDSCRIPT + string "Linker script for the SPL stage" + default "arch/$(ARCH)/cpu/u-boot-spl.lds" + depends on SPL + help + The SPL stage will usually require a different linker-script + (as it runs from a different memory region) than the regular + U-Boot stage. Set this to the path of the linker-script to + be used for SPL. + config SPL_BOARD_INIT bool "Call board-specific initialization in SPL" help @@ -25,6 +35,17 @@ config SPL_BOARD_INIT spl_board_init() from board_init_r(). This function should be provided by the board. +config SPL_BOOTROM_SUPPORT + bool "Support returning to the BOOTROM" + help + Some platforms (e.g. the Rockchip RK3368) provide support in their + ROM for loading the next boot-stage after performing basic setup + from the SPL stage. + + Enable this option, to return to the BOOTROM through the + BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the + boot device list, if not implemented for a given board) + config SPL_RAW_IMAGE_SUPPORT bool "Support SPL loading and booting of RAW images" default n if (ARCH_MX6 && (SPL_MMC_SUPPORT || SPL_SATA_SUPPORT)) @@ -51,6 +72,15 @@ config SPL_SYS_MALLOC_SIMPLE this will make the SPL binary smaller at the cost of more heap usage as the *_simple malloc functions do not re-use free-ed mem. +config TPL_SYS_MALLOC_SIMPLE + bool + prompt "Only use malloc_simple functions in the TPL" + help + Say Y here to only use the *_simple malloc functions from + malloc_simple.c, rather then using the versions from dlmalloc.c; + this will make the TPL binary smaller at the cost of more heap + usage as the *_simple malloc functions do not re-use free-ed mem. + config SPL_STACK_R bool "Enable SDRAM location for SPL stack" help @@ -248,8 +278,8 @@ config SPL_ENV_SUPPORT needed in SPL as it has a much simpler task with less configuration. But some boards use this to support 'Falcon' boot on EXT2 and FAT, where SPL boots directly into Linux without - starting U-Boot first. Enabling this option will make getenv() - and setenv() available in SPL. + starting U-Boot first. Enabling this option will make env_get() + and env_set() available in SPL. config SPL_SAVEENV bool "Support save environment" @@ -573,14 +603,6 @@ config SPL_SPI_SUPPORT enable SPI drivers that are needed for other purposes also, such as a SPI PMIC. -config SPL_TIMER_SUPPORT - bool "Support timer drivers" - help - Enable support for timer drivers in SPL. These can be used to get - a timer value when in SPL, or perhaps for implementing a delay - function. This enables the drivers in drivers/timer as part of an - SPL build. - config SPL_USB_HOST_SUPPORT bool "Support USB host drivers" help @@ -687,6 +709,74 @@ config TPL if TPL +config TPL_LDSCRIPT + string "Linker script for the TPL stage" + depends on TPL + help + The TPL stage will usually require a different linker-script + (as it runs from a different memory region) than the regular + U-Boot stage. Set this to the path of the linker-script to + be used for TPL. + + May be left empty to trigger the Makefile infrastructure to + fall back to the linker-script used for the SPL stage. + +config TPL_NEEDS_SEPARATE_TEXT_BASE + bool "TPL needs a separate text-base" + default n + depends on TPL + help + Enable, if the TPL stage should not inherit its text-base + from the SPL stage. When enabled, a base address for the + .text sections of the TPL stage has to be set below. + +config TPL_NEEDS_SEPARATE_STACK + bool "TPL needs a separate initial stack-pointer" + default n + depends on TPL + help + Enable, if the TPL stage should not inherit its initial + stack-pointer from the settings for the SPL stage. + +config TPL_TEXT_BASE + hex "Base address for the .text section of the TPL stage" + depends on TPL_NEEDS_SEPARATE_TEXT_BASE + help + The base address for the .text section of the TPL stage. + +config TPL_MAX_SIZE + int "Maximum size (in bytes) for the TPL stage" + default 0 + depends on TPL + help + The maximum size (in bytes) of the TPL stage. + +config TPL_STACK + hex "Address of the initial stack-pointer for the TPL stage" + depends on TPL_NEEDS_SEPARATE_STACK + help + The address of the initial stack-pointer for the TPL stage. + Usually this will be the (aligned) top-of-stack. + +config TPL_BOOTROM_SUPPORT + bool "Support returning to the BOOTROM (from TPL)" + help + Some platforms (e.g. the Rockchip RK3368) provide support in their + ROM for loading the next boot-stage after performing basic setup + from the TPL stage. + + Enable this option, to return to the BOOTROM through the + BOOT_DEVICE_BOOTROM (or fall-through to the next boot device in the + boot device list, if not implemented for a given board) + +config TPL_DRIVERS_MISC_SUPPORT + bool "Support misc drivers in TPL" + help + Enable miscellaneous drivers in TPL. These drivers perform various + tasks that don't fall nicely into other categories, Enable this + option to build the drivers in drivers/misc as part of an TPL + build, for those that support building in TPL (not all drivers do). + config TPL_ENV_SUPPORT bool "Support an environment" help @@ -695,7 +785,7 @@ config TPL_ENV_SUPPORT config TPL_I2C_SUPPORT bool "Support I2C" help - Enable support for the I2C bus in SPL. See SPL_I2C_SUPPORT for + Enable support for the I2C bus in TPL. See SPL_I2C_SUPPORT for details. config TPL_LIBCOMMON_SUPPORT @@ -725,24 +815,24 @@ config TPL_MMC_SUPPORT config TPL_NAND_SUPPORT bool "Support NAND flash" help - Enable support for NAND in SPL. See SPL_NAND_SUPPORT for details. + Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details. config TPL_SERIAL_SUPPORT bool "Support serial" help - Enable support for serial in SPL. See SPL_SERIAL_SUPPORT for + Enable support for serial in TPL. See SPL_SERIAL_SUPPORT for details. config TPL_SPI_FLASH_SUPPORT bool "Support SPI flash drivers" help - Enable support for using SPI flash in SPL. See SPL_SPI_FLASH_SUPPORT + Enable support for using SPI flash in TPL. See SPL_SPI_FLASH_SUPPORT for details. config TPL_SPI_SUPPORT bool "Support SPI drivers" help - Enable support for using SPI in SPL. See SPL_SPI_SUPPORT for + Enable support for using SPI in TPL. See SPL_SPI_SUPPORT for details. endif # TPL diff --git a/common/spl/Makefile b/common/spl/Makefile index 47a64dd7d0..112b3e6022 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -10,23 +10,24 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o -obj-$(CONFIG_SPL_LOAD_FIT) += spl_fit.o -obj-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o -obj-$(CONFIG_SPL_XIP_SUPPORT) += spl_xip.o -obj-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o +obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o +obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o +obj-$(CONFIG_$(SPL_TPL_)SPL_NOR_SUPPORT) += spl_nor.o +obj-$(CONFIG_$(SPL_TPL_)SPL_XIP_SUPPORT) += spl_xip.o +obj-$(CONFIG_$(SPL_TPL_)SPL_YMODEM_SUPPORT) += spl_ymodem.o ifndef CONFIG_SPL_UBI -obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o -obj-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o +obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o endif -obj-$(CONFIG_SPL_UBI) += spl_ubi.o -obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o -obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o -obj-$(CONFIG_SPL_ATF_SUPPORT) += spl_atf.o -obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o -obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o -obj-$(CONFIG_SPL_EXT_SUPPORT) += spl_ext.o -obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o -obj-$(CONFIG_SPL_DFU_SUPPORT) += spl_dfu.o -obj-$(CONFIG_SPL_SPI_LOAD) += spl_spi.o -obj-$(CONFIG_SPL_RAM_SUPPORT) += spl_ram.o +obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o +obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o +obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o +obj-$(CONFIG_$(SPL_TPL_)ATF_SUPPORT) += spl_atf.o +obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o +obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o +obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o +obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o +obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o +obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o +obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o endif diff --git a/common/spl/spl.c b/common/spl/spl.c index c56cc6f0ec..d245cfc0d1 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -6,6 +6,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include <common.h> #include <dm.h> #include <spl.h> @@ -243,7 +244,7 @@ static int spl_common_init(bool setup_malloc) return ret; } } - if (IS_ENABLED(CONFIG_SPL_DM)) { + if (CONFIG_IS_ENABLED(DM)) { bootstage_start(BOOTSTATE_ID_ACCUM_DM_SPL, "dm_spl"); /* With CONFIG_SPL_OF_PLATDATA, bring in all devices */ ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA)); @@ -424,7 +425,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) gd->malloc_ptr / 1024); #endif - if (IS_ENABLED(CONFIG_SPL_ATF_SUPPORT)) { + if (CONFIG_IS_ENABLED(ATF_SUPPORT)) { debug("loaded - jumping to U-Boot via ATF BL31.\n"); bl31_entry(); } @@ -486,7 +487,7 @@ ulong spl_relocate_stack_gd(void) gd_t *new_gd; ulong ptr = CONFIG_SPL_STACK_R_ADDR; -#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_SPL_SYS_MALLOC_F_LEN +#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_VAL(SYS_MALLOC_F_LEN) if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { ptr -= CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN; gd->malloc_base = ptr; diff --git a/common/spl/spl_bootrom.c b/common/spl/spl_bootrom.c new file mode 100644 index 0000000000..6804246d03 --- /dev/null +++ b/common/spl/spl_bootrom.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> + +__weak void board_return_to_bootrom(void) +{ +} + +static int spl_return_to_bootrom(struct spl_image_info *spl_image, + struct spl_boot_device *bootdev) +{ + /* + * If the board implements a way to return to its ROM (with + * the expectation that the next stage of will be booted by + * the ROM), it will implement board_return_to_bootrom() and + * should not return from it. + */ + board_return_to_bootrom(); + return false; +} + +SPL_LOAD_IMAGE_METHOD("BOOTROM", 0, BOOT_DEVICE_BOOTROM, spl_return_to_bootrom); diff --git a/common/spl/spl_dfu.c b/common/spl/spl_dfu.c index e8d0ba18e6..2c974735b1 100644 --- a/common/spl/spl_dfu.c +++ b/common/spl/spl_dfu.c @@ -40,13 +40,13 @@ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr) /* set default environment */ set_default_env(0); - str_env = getenv(dfu_alt_info); + str_env = env_get(dfu_alt_info); if (!str_env) { error("\"dfu_alt_info\" env variable not defined!\n"); return -EINVAL; } - ret = setenv("dfu_alt_info", str_env); + ret = env_set("dfu_alt_info", str_env); if (ret) { error("unable to set env variable \"dfu_alt_info\"!\n"); return -EINVAL; diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index f17c6b9494..559ba0b797 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -89,7 +89,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image, return -1; } #if defined(CONFIG_SPL_ENV_SUPPORT) - file = getenv("falcon_args_file"); + file = env_get("falcon_args_file"); if (file) { err = ext4fs_open(file, &filelen); if (err < 0) { @@ -102,7 +102,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image, file, err); goto defaults; } - file = getenv("falcon_image_file"); + file = env_get("falcon_image_file"); if (file) { err = spl_load_image_ext(spl_image, block_dev, partition, file); diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c index 5e312160d9..60b85f082d 100644 --- a/common/spl/spl_fat.c +++ b/common/spl/spl_fat.c @@ -113,7 +113,7 @@ int spl_load_image_fat_os(struct spl_image_info *spl_image, return err; #if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT) - file = getenv("falcon_args_file"); + file = env_get("falcon_args_file"); if (file) { err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); if (err <= 0) { @@ -121,7 +121,7 @@ int spl_load_image_fat_os(struct spl_image_info *spl_image, file, err); goto defaults; } - file = getenv("falcon_image_file"); + file = env_get("falcon_image_file"); if (file) { err = spl_load_image_fat(spl_image, block_dev, partition, file); diff --git a/common/spl/spl_net.c b/common/spl/spl_net.c index 85fe508b17..88831097fa 100644 --- a/common/spl/spl_net.c +++ b/common/spl/spl_net.c @@ -33,14 +33,14 @@ static int spl_net_load_image(struct spl_image_info *spl_image, env_init(); env_relocate(); - setenv("autoload", "yes"); + env_set("autoload", "yes"); rv = eth_initialize(); if (rv == 0) { printf("No Ethernet devices found\n"); return -ENODEV; } if (bootdev->boot_device_name) - setenv("ethact", bootdev->boot_device_name); + env_set("ethact", bootdev->boot_device_name); rv = net_loop(BOOTP); if (rv < 0) { printf("Problem booting with BOOTP\n"); diff --git a/common/splash.c b/common/splash.c index 89af437f2c..d251b3b654 100644 --- a/common/splash.c +++ b/common/splash.c @@ -60,7 +60,7 @@ __weak int splash_screen_prepare(void) #ifdef CONFIG_SPLASH_SCREEN_ALIGN void splash_get_pos(int *x, int *y) { - char *s = getenv("splashpos"); + char *s = env_get("splashpos"); if (!s) return; diff --git a/common/splash_source.c b/common/splash_source.c index 867a798487..8c0ac581f7 100644 --- a/common/splash_source.c +++ b/common/splash_source.c @@ -220,7 +220,7 @@ static int splash_load_fs(struct splash_location *location, u32 bmp_load_addr) loff_t actread; char *splash_file; - splash_file = getenv("splashfile"); + splash_file = env_get("splashfile"); if (!splash_file) splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME; @@ -286,7 +286,7 @@ static struct splash_location *select_splash_location( if (!locations || size == 0) return NULL; - env_splashsource = getenv("splashsource"); + env_splashsource = env_get("splashsource"); if (env_splashsource == NULL) return &locations[0]; @@ -383,7 +383,7 @@ int splash_source_load(struct splash_location *locations, uint size) char *env_splashimage_value; u32 bmp_load_addr; - env_splashimage_value = getenv("splashimage"); + env_splashimage_value = env_get("splashimage"); if (env_splashimage_value == NULL) return -ENOENT; diff --git a/common/update.c b/common/update.c index 0767fcbcb5..974f4655e7 100644 --- a/common/update.c +++ b/common/update.c @@ -59,7 +59,7 @@ static int update_load(char *filename, ulong msec_max, int cnt_max, ulong addr) /* save used globals and env variable */ saved_timeout_msecs = tftp_timeout_ms; saved_timeout_count = tftp_timeout_count_max; - saved_netretry = strdup(getenv("netretry")); + saved_netretry = strdup(env_get("netretry")); saved_bootfile = strdup(net_boot_file_name); /* set timeouts for auto-update */ @@ -67,7 +67,7 @@ static int update_load(char *filename, ulong msec_max, int cnt_max, ulong addr) tftp_timeout_count_max = cnt_max; /* we don't want to retry the connection if errors occur */ - setenv("netretry", "no"); + env_set("netretry", "no"); /* download the update file */ load_addr = addr; @@ -83,7 +83,7 @@ static int update_load(char *filename, ulong msec_max, int cnt_max, ulong addr) tftp_timeout_ms = saved_timeout_msecs; tftp_timeout_count_max = saved_timeout_count; - setenv("netretry", saved_netretry); + env_set("netretry", saved_netretry); if (saved_netretry != NULL) free(saved_netretry); @@ -254,7 +254,7 @@ int update_tftp(ulong addr, char *interface, char *devstring) printf("Auto-update from TFTP: "); /* get the file name of the update file */ - filename = getenv(UPDATE_FILE_ENV); + filename = env_get(UPDATE_FILE_ENV); if (filename == NULL) { printf("failed, env. variable '%s' not found\n", UPDATE_FILE_ENV); @@ -264,7 +264,8 @@ int update_tftp(ulong addr, char *interface, char *devstring) printf("trying update file '%s'\n", filename); /* get load address of downloaded update file */ - if ((env_addr = getenv("loadaddr")) != NULL) + env_addr = env_get("loadaddr"); + if (env_addr) addr = simple_strtoul(env_addr, NULL, 16); else addr = CONFIG_UPDATE_LOAD_ADDR; diff --git a/common/usb_hub.c b/common/usb_hub.c index 70bc6e2931..86a3477664 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -189,7 +189,7 @@ static void usb_hub_power_on(struct usb_hub_device *hub) * but allow this time to be increased via env variable as some * devices break the spec and require longer warm-up times */ - env = getenv("usb_pgood_delay"); + env = env_get("usb_pgood_delay"); if (env) pgood_delay = max(pgood_delay, (unsigned)simple_strtol(env, NULL, 0)); diff --git a/common/usb_kbd.c b/common/usb_kbd.c index d2d29cc98f..8cbdba6ac2 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -515,7 +515,7 @@ static int probe_usb_keyboard(struct usb_device *dev) if (error) return error; - stdinname = getenv("stdin"); + stdinname = env_get("stdin"); #if CONFIG_IS_ENABLED(CONSOLE_MUX) error = iomux_doenv(stdin, stdinname); if (error) @@ -582,7 +582,7 @@ int usb_kbd_deregister(int force) if (stdio_deregister_dev(dev, force) != 0) return 1; #if CONFIG_IS_ENABLED(CONSOLE_MUX) - if (iomux_doenv(stdin, getenv("stdin")) != 0) + if (iomux_doenv(stdin, env_get("stdin")) != 0) return 1; #endif #ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE @@ -627,7 +627,7 @@ static int usb_kbd_remove(struct udevice *dev) goto err; } #if CONFIG_IS_ENABLED(CONSOLE_MUX) - if (iomux_doenv(stdin, getenv("stdin"))) { + if (iomux_doenv(stdin, env_get("stdin"))) { ret = -ENOLINK; goto err; } diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 914302276f..d76ddcf811 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -18,8 +18,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_SUN4I_EMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 15c6879c71..08fe531d7c 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -17,10 +17,10 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_PARTITION_UUIDS is not set diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index 034ae983a5..1c58c54435 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -27,6 +27,7 @@ CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_GADGET=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index f7b600be5b..8c53790f64 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -13,20 +13,20 @@ CONFIG_AHCI=y CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_PARTITION_UUIDS is not set -CONFIG_SCSI=y CONFIG_DFU_RAM=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_GADGET=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 182a8f5f74..1bc0b7fbb9 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -16,9 +16,9 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index ae98e41685..009c4aa7e2 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 61fe5e6390..c2fe2d234f 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -20,10 +20,10 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/B4420QDS_NAND_defconfig b/configs/B4420QDS_NAND_defconfig index 16c34c01fd..55bb395341 100644 --- a/configs/B4420QDS_NAND_defconfig +++ b/configs/B4420QDS_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -20,8 +20,8 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -31,6 +31,7 @@ CONFIG_CMD_EXT2=y CONFIG_FSL_CAAM=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y diff --git a/configs/B4420QDS_SPIFLASH_defconfig b/configs/B4420QDS_SPIFLASH_defconfig index e8fa408cdf..a751e919a7 100644 --- a/configs/B4420QDS_SPIFLASH_defconfig +++ b/configs/B4420QDS_SPIFLASH_defconfig @@ -11,8 +11,8 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/B4420QDS_defconfig b/configs/B4420QDS_defconfig index 8389bb1d24..77690f38a4 100644 --- a/configs/B4420QDS_defconfig +++ b/configs/B4420QDS_defconfig @@ -10,8 +10,8 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/B4860QDS_NAND_defconfig b/configs/B4860QDS_NAND_defconfig index 4e30b98a68..fa1af8786e 100644 --- a/configs/B4860QDS_NAND_defconfig +++ b/configs/B4860QDS_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -20,8 +20,8 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -31,6 +31,7 @@ CONFIG_CMD_EXT2=y CONFIG_FSL_CAAM=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y diff --git a/configs/B4860QDS_SECURE_BOOT_defconfig b/configs/B4860QDS_SECURE_BOOT_defconfig index 43bb4e56ba..f756d002be 100644 --- a/configs/B4860QDS_SECURE_BOOT_defconfig +++ b/configs/B4860QDS_SECURE_BOOT_defconfig @@ -11,8 +11,8 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/B4860QDS_SPIFLASH_defconfig b/configs/B4860QDS_SPIFLASH_defconfig index 925ff7808b..643c5d9555 100644 --- a/configs/B4860QDS_SPIFLASH_defconfig +++ b/configs/B4860QDS_SPIFLASH_defconfig @@ -11,8 +11,8 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig b/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig index f21c6ec673..b194cc4ec7 100644 --- a/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/B4860QDS_SRIO_PCIE_BOOT_defconfig @@ -13,8 +13,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/B4860QDS_defconfig b/configs/B4860QDS_defconfig index 3f2876c7c4..b8de046918 100644 --- a/configs/B4860QDS_defconfig +++ b/configs/B4860QDS_defconfig @@ -10,8 +10,8 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig index 6e8ab27d3b..e8ee82f75d 100644 --- a/configs/BSC9131RDB_NAND_SYSCLK100_defconfig +++ b/configs/BSC9131RDB_NAND_SYSCLK100_defconfig @@ -7,7 +7,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,SYS_CLK_100" +CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -15,8 +15,8 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -26,6 +26,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_FSL_CAAM=y # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/BSC9131RDB_NAND_defconfig b/configs/BSC9131RDB_NAND_defconfig index 577e3aee9f..a8f897df02 100644 --- a/configs/BSC9131RDB_NAND_defconfig +++ b/configs/BSC9131RDB_NAND_defconfig @@ -7,7 +7,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -15,8 +14,8 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -26,6 +25,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_FSL_CAAM=y # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig index 7f6186d024..a10a011cd9 100644 --- a/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig +++ b/configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig @@ -12,8 +12,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9131RDB_SPIFLASH_defconfig b/configs/BSC9131RDB_SPIFLASH_defconfig index f12677a977..8593d93d96 100644 --- a/configs/BSC9131RDB_SPIFLASH_defconfig +++ b/configs/BSC9131RDB_SPIFLASH_defconfig @@ -12,8 +12,8 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig index 78f33206e1..d86d7b1511 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT,SYS_CLK_100_DDR_100" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig index 801468ce28..99356008a9 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK100_defconfig @@ -7,15 +7,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,SYS_CLK_100_DDR_100" +CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_100" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -25,6 +25,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig index f0c2c900b2..d23952f2f4 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND_SECBOOT,SYS_CLK_100_DDR_133" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig index 08554ca292..ad07acb396 100644 --- a/configs/BSC9132QDS_NAND_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_NAND_DDRCLK133_defconfig @@ -7,15 +7,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,SYS_CLK_100_DDR_133" +CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_133" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -25,6 +25,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig index c60040967c..69b9a0671d 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_100" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig index 9b64e7c6bb..716ab8421b 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK100_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig index e12dce4c49..14885dc460 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_CLK_100_DDR_133" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig index ffd88abd30..4260c5c7ec 100644 --- a/configs/BSC9132QDS_NOR_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_NOR_DDRCLK133_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig index 4e5d8de4f6..4bbea52f8b 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SDCARD,SYS_CLK_100_DDR_100" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig index 039973efaa..4a5c18b05c 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig index 8a5cb5d8cd..7a7e56d71f 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SDCARD,SYS_CLK_100_DDR_133" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig index 5c8d26c9e8..ff1f68d1ce 100644 --- a/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig index 0c620f4222..3c684a0352 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_100" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig index 8a647a9c65..4837fc876e 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig index 07b70caec3..dd801ab8e9 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_133" CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig index 340ccad829..e77cea921f 100644 --- a/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig +++ b/configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index 8c409faab8..a35d4bfd89 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -14,6 +14,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_SCSI=y CONFIG_AXP_DLDO4_VOLT=2500 CONFIG_AXP_ELDO3_VOLT=1200 +CONFIG_SCSI=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 352a18ec8c..4e8e1e1a1f 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -17,8 +17,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_NETCONSOLE=y -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 4218d5a97a..214c0d85f0 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_NETCONSOLE=y -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO4_VOLT=2500 +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/C29XPCIE_NAND_defconfig b/configs/C29XPCIE_NAND_defconfig index c1b4998ec2..5efaf24ba2 100644 --- a/configs/C29XPCIE_NAND_defconfig +++ b/configs/C29XPCIE_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -20,16 +18,19 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_DOS_PARTITION=y CONFIG_FSL_CAAM=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/C29XPCIE_NOR_SECBOOT_defconfig b/configs/C29XPCIE_NOR_SECBOOT_defconfig index 13982c766c..89d6fc3d44 100644 --- a/configs/C29XPCIE_NOR_SECBOOT_defconfig +++ b/configs/C29XPCIE_NOR_SECBOOT_defconfig @@ -11,8 +11,8 @@ CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_DOS_PARTITION=y diff --git a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig index 79dbde7b8a..cd366a7096 100644 --- a/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig +++ b/configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig @@ -12,8 +12,8 @@ CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_DOS_PARTITION=y diff --git a/configs/C29XPCIE_SPIFLASH_defconfig b/configs/C29XPCIE_SPIFLASH_defconfig index 2f24800b0d..ef6557b772 100644 --- a/configs/C29XPCIE_SPIFLASH_defconfig +++ b/configs/C29XPCIE_SPIFLASH_defconfig @@ -11,8 +11,8 @@ CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_DOS_PARTITION=y diff --git a/configs/C29XPCIE_defconfig b/configs/C29XPCIE_defconfig index 7daf125748..aee9cd097d 100644 --- a/configs/C29XPCIE_defconfig +++ b/configs/C29XPCIE_defconfig @@ -10,8 +10,8 @@ CONFIG_BOOTDELAY=-1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_DOS_PARTITION=y diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig index f9033bc141..df6371af88 100644 --- a/configs/CHIP_pro_defconfig +++ b/configs/CHIP_pro_defconfig @@ -13,13 +13,14 @@ CONFIG_ENV_UBI_VOLUME="uboot-env" CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set CONFIG_MTDIDS_DEFAULT="nand0=sunxi-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=sunxi-nand.0:256k(spl),256k(spl-backup),2m(uboot),2m(uboot-backup),-(UBI)" # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_NAND_SUNXI=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index dc2722a9bf..0a0f95d6fb 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index f83a691a26..a15c831a8a 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -15,6 +15,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_SUN4I_EMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index cbd535c2bc..f10d4d1a1a 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -15,18 +15,18 @@ CONFIG_AHCI=y CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_PARTITION_UUIDS is not set -CONFIG_SCSI=y CONFIG_DFU_RAM=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_GADGET=y diff --git a/configs/Cyrus_P5020_defconfig b/configs/Cyrus_P5020_defconfig index 239a838875..7f3f899c3a 100644 --- a/configs/Cyrus_P5020_defconfig +++ b/configs/Cyrus_P5020_defconfig @@ -14,8 +14,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/Cyrus_P5040_defconfig b/configs/Cyrus_P5040_defconfig index ffdaa07a5a..6a864b8343 100644 --- a/configs/Cyrus_P5040_defconfig +++ b/configs/Cyrus_P5040_defconfig @@ -14,8 +14,8 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index bab25b401c..6e6f5b2aaf 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 2ec0847e8a..65ccb6420c 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -17,8 +17,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 1e61cd20ba..c6682b8f79 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -17,8 +17,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index f0d382c002..fb81bad00f 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -15,10 +15,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -# CONFIG_SPL_BLK is not set CONFIG_DM_MMC=y -# CONFIG_SPL_DM_MMC is not set -# CONFIG_SPL_DM_MMC_OPS is not set CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y diff --git a/configs/M52277EVB_defconfig b/configs/M52277EVB_defconfig index 42a031ad5b..3fa3e6517c 100644 --- a/configs/M52277EVB_defconfig +++ b/configs/M52277EVB_defconfig @@ -6,9 +6,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " +CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/M52277EVB_stmicro_defconfig b/configs/M52277EVB_stmicro_defconfig index caade1d26e..e9eb22e9fa 100644 --- a/configs/M52277EVB_stmicro_defconfig +++ b/configs/M52277EVB_stmicro_defconfig @@ -5,9 +5,9 @@ CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig index ee8ba643b2..2769f713e0 100644 --- a/configs/M5235EVB_Flash32_defconfig +++ b/configs/M5235EVB_Flash32_defconfig @@ -5,9 +5,10 @@ CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig index d3bbf21ff2..b8afd65c88 100644 --- a/configs/M5235EVB_defconfig +++ b/configs/M5235EVB_defconfig @@ -5,9 +5,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index 245546eeef..e19fe6f6bb 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -4,9 +4,9 @@ CONFIG_TARGET_M5275EVB=y CONFIG_BOOTDELAY=5 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index 67dfe0bec1..b5caeedd2c 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -3,6 +3,8 @@ CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_TARGET_M53017EVB=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig index b4eabf2d9c..ab69366174 100644 --- a/configs/M5329AFEE_defconfig +++ b/configs/M5329AFEE_defconfig @@ -5,8 +5,8 @@ CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0" CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig index ee1bd371ba..6346c89661 100644 --- a/configs/M5329BFEE_defconfig +++ b/configs/M5329BFEE_defconfig @@ -5,8 +5,8 @@ CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig index bac65b57fd..6dd1d71183 100644 --- a/configs/M5373EVB_defconfig +++ b/configs/M5373EVB_defconfig @@ -5,8 +5,8 @@ CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16" CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="-> " -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/M54418TWR_defconfig b/configs/M54418TWR_defconfig index bf0b34fd23..07f8913430 100644 --- a/configs/M54418TWR_defconfig +++ b/configs/M54418TWR_defconfig @@ -3,13 +3,15 @@ CONFIG_SYS_TEXT_BASE=0x47E00000 CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2 ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_nand_mii_defconfig b/configs/M54418TWR_nand_mii_defconfig index ba7cb9f4bd..9c4ae39904 100644 --- a/configs/M54418TWR_nand_mii_defconfig +++ b/configs/M54418TWR_nand_mii_defconfig @@ -3,13 +3,15 @@ CONFIG_SYS_TEXT_BASE=0x47E00000 CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=25000000" CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_nand_rmii_defconfig b/configs/M54418TWR_nand_rmii_defconfig index 6abe98a4ca..31d199a2db 100644 --- a/configs/M54418TWR_nand_rmii_defconfig +++ b/configs/M54418TWR_nand_rmii_defconfig @@ -3,13 +3,15 @@ CONFIG_SYS_TEXT_BASE=0x47E00000 CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_nand_rmii_lowfreq_defconfig b/configs/M54418TWR_nand_rmii_lowfreq_defconfig index 3860716919..00e6fb1c5b 100644 --- a/configs/M54418TWR_nand_rmii_lowfreq_defconfig +++ b/configs/M54418TWR_nand_rmii_lowfreq_defconfig @@ -3,13 +3,15 @@ CONFIG_SYS_TEXT_BASE=0x47E00000 CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="SYS_NAND_BOOT,LOW_MCFCLK,SYS_INPUT_CLKSRC=50000000" CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro,-(jffs2) console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_serial_mii_defconfig b/configs/M54418TWR_serial_mii_defconfig index 47a786a8a6..3d879c5837 100644 --- a/configs/M54418TWR_serial_mii_defconfig +++ b/configs/M54418TWR_serial_mii_defconfig @@ -3,13 +3,15 @@ CONFIG_SYS_TEXT_BASE=0x47E00000 CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=25000000" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2 ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54418TWR_serial_rmii_defconfig b/configs/M54418TWR_serial_rmii_defconfig index bf0b34fd23..07f8913430 100644 --- a/configs/M54418TWR_serial_rmii_defconfig +++ b/configs/M54418TWR_serial_rmii_defconfig @@ -3,13 +3,15 @@ CONFIG_SYS_TEXT_BASE=0x47E00000 CONFIG_TARGET_M54418TWR=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=50000000" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=192.168.1.1:/tftpboot/192.168.1.2 ip=192.168.1.2:192.168.1.1:192.168.1.1: 255.255.255.0::eth0:off:rw console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="-> " # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/M54451EVB_defconfig b/configs/M54451EVB_defconfig index 5f6382d46a..53eec4f745 100644 --- a/configs/M54451EVB_defconfig +++ b/configs/M54451EVB_defconfig @@ -4,12 +4,14 @@ CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INPUT_CLKSRC=24000000" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" CONFIG_SYS_PROMPT="-> " +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M54451EVB_stmicro_defconfig b/configs/M54451EVB_stmicro_defconfig index 0f7a87ce98..e3a2021e27 100644 --- a/configs/M54451EVB_stmicro_defconfig +++ b/configs/M54451EVB_stmicro_defconfig @@ -4,11 +4,13 @@ CONFIG_TARGET_M54451EVB=y CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_STMICRO_BOOT,SYS_INPUT_CLKSRC=24000000" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M54455EVB_a66_defconfig b/configs/M54455EVB_a66_defconfig index 11ed3c64eb..563b9df903 100644 --- a/configs/M54455EVB_a66_defconfig +++ b/configs/M54455EVB_a66_defconfig @@ -4,12 +4,14 @@ CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=66666666" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M54455EVB_defconfig b/configs/M54455EVB_defconfig index 9c90ca536d..94777dec3e 100644 --- a/configs/M54455EVB_defconfig +++ b/configs/M54455EVB_defconfig @@ -4,13 +4,15 @@ CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_ATMEL_BOOT,SYS_INPUT_CLKSRC=33333333" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" CONFIG_SYS_PROMPT="-> " CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M54455EVB_i66_defconfig b/configs/M54455EVB_i66_defconfig index d5cdf73c01..e3f7ffadd9 100644 --- a/configs/M54455EVB_i66_defconfig +++ b/configs/M54455EVB_i66_defconfig @@ -4,12 +4,14 @@ CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=66666666" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M54455EVB_intel_defconfig b/configs/M54455EVB_intel_defconfig index 158024237b..b8e85bd7e3 100644 --- a/configs/M54455EVB_intel_defconfig +++ b/configs/M54455EVB_intel_defconfig @@ -4,12 +4,14 @@ CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_INTEL_BOOT,SYS_INPUT_CLKSRC=33333333" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M54455EVB_stm33_defconfig b/configs/M54455EVB_stm33_defconfig index dac5f6f7c6..e5225b6af4 100644 --- a/configs/M54455EVB_stm33_defconfig +++ b/configs/M54455EVB_stm33_defconfig @@ -4,12 +4,14 @@ CONFIG_TARGET_M54455EVB=y CONFIG_SYS_EXTRA_OPTIONS="SYS_STMICRO_BOOT,CF_SBF,SYS_INPUT_CLKSRC=33333333" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/M5475AFE_defconfig b/configs/M5475AFE_defconfig index 07ec2a95f1..8361ae96c7 100644 --- a/configs/M5475AFE_defconfig +++ b/configs/M5475AFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64" CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5475BFE_defconfig b/configs/M5475BFE_defconfig index 73338338ef..ce2fafaa22 100644 --- a/configs/M5475BFE_defconfig +++ b/configs/M5475BFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5475CFE_defconfig b/configs/M5475CFE_defconfig index deb3d6f81d..b13cf2659d 100644 --- a/configs/M5475CFE_defconfig +++ b/configs/M5475CFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5475DFE_defconfig b/configs/M5475DFE_defconfig index 9a036cfd11..de269c7afb 100644 --- a/configs/M5475DFE_defconfig +++ b/configs/M5475DFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_US CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5475EFE_defconfig b/configs/M5475EFE_defconfig index 0f6c3d6800..eb86f49d57 100644 --- a/configs/M5475EFE_defconfig +++ b/configs/M5475EFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VI CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5475FFE_defconfig b/configs/M5475FFE_defconfig index 4f8b4bb5bd..757385ff30 100644 --- a/configs/M5475FFE_defconfig +++ b/configs/M5475FFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5475GFE_defconfig b/configs/M5475GFE_defconfig index 90e919232a..b9a4c3c361 100644 --- a/configs/M5475GFE_defconfig +++ b/configs/M5475GFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64" CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485AFE_defconfig b/configs/M5485AFE_defconfig index d49a6bedbb..f4e7879337 100644 --- a/configs/M5485AFE_defconfig +++ b/configs/M5485AFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64" CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485BFE_defconfig b/configs/M5485BFE_defconfig index e0d619ef6b..6774f47f6d 100644 --- a/configs/M5485BFE_defconfig +++ b/configs/M5485BFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485CFE_defconfig b/configs/M5485CFE_defconfig index f0674e381f..164aeb35e8 100644 --- a/configs/M5485CFE_defconfig +++ b/configs/M5485CFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485DFE_defconfig b/configs/M5485DFE_defconfig index be8990a076..63f2aafee3 100644 --- a/configs/M5485DFE_defconfig +++ b/configs/M5485DFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_US CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485EFE_defconfig b/configs/M5485EFE_defconfig index 9961be4c18..989415a63c 100644 --- a/configs/M5485EFE_defconfig +++ b/configs/M5485EFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VI CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485FFE_defconfig b/configs/M5485FFE_defconfig index 8edd4b9ea0..9d8a37ae6d 100644 --- a/configs/M5485FFE_defconfig +++ b/configs/M5485FFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485GFE_defconfig b/configs/M5485GFE_defconfig index 8794f45558..6100c0af75 100644 --- a/configs/M5485GFE_defconfig +++ b/configs/M5485GFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64" CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/M5485HFE_defconfig b/configs/M5485HFE_defconfig index 9a4f23d0c9..9ccf266154 100644 --- a/configs/M5485HFE_defconfig +++ b/configs/M5485HFE_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NO CONFIG_BOOTDELAY=1 CONFIG_SYS_PROMPT="-> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig index 7aaf339213..943a6b9086 100644 --- a/configs/MCR3000_defconfig +++ b/configs/MCR3000_defconfig @@ -39,6 +39,8 @@ CONFIG_SYS_IMMR=0xFF000000 CONFIG_OF_BOARD_SETUP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="ubi.mtd=4 root=ubi0:rootfs rw rootfstype=ubifs rootflags=sync console=ttyCPM0,115200N8 ip=${ipaddr}:::${netmask}:mcr3k:eth0:off" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="S3K> " CONFIG_AUTOBOOT_KEYED=y @@ -49,10 +51,10 @@ CONFIG_AUTOBOOT_DELAY_STR="root" # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/MPC8308RDB_defconfig b/configs/MPC8308RDB_defconfig index ce131c11cd..27d4e96fbf 100644 --- a/configs/MPC8308RDB_defconfig +++ b/configs/MPC8308RDB_defconfig @@ -8,8 +8,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/MPC8313ERDB_33_defconfig b/configs/MPC8313ERDB_33_defconfig index c7f6ec29d3..6790dd5e02 100644 --- a/configs/MPC8313ERDB_33_defconfig +++ b/configs/MPC8313ERDB_33_defconfig @@ -7,9 +7,10 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/MPC8313ERDB_66_defconfig b/configs/MPC8313ERDB_66_defconfig index c31e7951f4..0bd9850133 100644 --- a/configs/MPC8313ERDB_66_defconfig +++ b/configs/MPC8313ERDB_66_defconfig @@ -7,9 +7,10 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig index 66bc67cacf..eb72a6a80f 100644 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ b/configs/MPC8313ERDB_NAND_33_defconfig @@ -5,14 +5,15 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=6 CONFIG_SPL=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -21,6 +22,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_MTDPARTS=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8313ERDB_NAND_66_defconfig b/configs/MPC8313ERDB_NAND_66_defconfig index e2491c92af..45f3f449e6 100644 --- a/configs/MPC8313ERDB_NAND_66_defconfig +++ b/configs/MPC8313ERDB_NAND_66_defconfig @@ -5,14 +5,15 @@ CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=6 CONFIG_SPL=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -21,6 +22,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_MTDPARTS=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig index b40b2c1bc2..5e6944ada0 100644 --- a/configs/MPC8315ERDB_defconfig +++ b/configs/MPC8315ERDB_defconfig @@ -6,10 +6,11 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8323ERDB_defconfig b/configs/MPC8323ERDB_defconfig index 097fb09a44..6ac618b04d 100644 --- a/configs/MPC8323ERDB_defconfig +++ b/configs/MPC8323ERDB_defconfig @@ -9,6 +9,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y # CONFIG_MMC is not set diff --git a/configs/MPC832XEMDS_HOST_33_defconfig b/configs/MPC832XEMDS_HOST_33_defconfig index f48e6083fc..db36b078a9 100644 --- a/configs/MPC832XEMDS_HOST_33_defconfig +++ b/configs/MPC832XEMDS_HOST_33_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y # CONFIG_MMC is not set diff --git a/configs/MPC832XEMDS_HOST_66_defconfig b/configs/MPC832XEMDS_HOST_66_defconfig index 60431ad371..cf0fc32d47 100644 --- a/configs/MPC832XEMDS_HOST_66_defconfig +++ b/configs/MPC832XEMDS_HOST_66_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y # CONFIG_MMC is not set diff --git a/configs/MPC832XEMDS_SLAVE_defconfig b/configs/MPC832XEMDS_SLAVE_defconfig index 7379e9a48a..df5af99900 100644 --- a/configs/MPC832XEMDS_SLAVE_defconfig +++ b/configs/MPC832XEMDS_SLAVE_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y # CONFIG_MMC is not set diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig index 862013a548..3b90e15ae0 100644 --- a/configs/MPC8349ITXGP_defconfig +++ b/configs/MPC8349ITXGP_defconfig @@ -5,9 +5,13 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITXGP,SYS_TEXT_BASE=0xFE000000" CONFIG_BOOTDELAY=6 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitxgp:eth0:off console=ttyS0,115200" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="MPC8349E-mITX-GP> " CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SDRAM=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig index 4f76b88b2e..e61dc0aff2 100644 --- a/configs/MPC8349ITX_LOWBOOT_defconfig +++ b/configs/MPC8349ITX_LOWBOOT_defconfig @@ -5,12 +5,16 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX,SYS_TEXT_BASE=0xFE000000" CONFIG_BOOTDELAY=6 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="MPC8349E-mITX> " CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y +CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig index 9b9d5f9b1a..63d8dcad4b 100644 --- a/configs/MPC8349ITX_defconfig +++ b/configs/MPC8349ITX_defconfig @@ -5,12 +5,16 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" CONFIG_BOOTDELAY=6 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="MPC8349E-mITX> " CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y +CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/MPC837XEMDS_HOST_defconfig b/configs/MPC837XEMDS_HOST_defconfig index 9ad9e0d147..f39d2039f7 100644 --- a/configs/MPC837XEMDS_HOST_defconfig +++ b/configs/MPC837XEMDS_HOST_defconfig @@ -6,9 +6,10 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y diff --git a/configs/MPC837XEMDS_defconfig b/configs/MPC837XEMDS_defconfig index de46fe1fb2..e78d8f0d4a 100644 --- a/configs/MPC837XEMDS_defconfig +++ b/configs/MPC837XEMDS_defconfig @@ -6,9 +6,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 5ca6f37dc1..c0ebf1797f 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -6,10 +6,11 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8536DS_36BIT_defconfig b/configs/MPC8536DS_36BIT_defconfig index 6940f34179..5dc284dad0 100644 --- a/configs/MPC8536DS_36BIT_defconfig +++ b/configs/MPC8536DS_36BIT_defconfig @@ -11,9 +11,10 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/MPC8536DS_SDCARD_defconfig b/configs/MPC8536DS_SDCARD_defconfig index a6eb30eff6..7d428a9cb5 100644 --- a/configs/MPC8536DS_SDCARD_defconfig +++ b/configs/MPC8536DS_SDCARD_defconfig @@ -11,9 +11,10 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8536DS_SPIFLASH_defconfig b/configs/MPC8536DS_SPIFLASH_defconfig index a5aa82e26b..1f26779a54 100644 --- a/configs/MPC8536DS_SPIFLASH_defconfig +++ b/configs/MPC8536DS_SPIFLASH_defconfig @@ -11,9 +11,10 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8536DS_defconfig b/configs/MPC8536DS_defconfig index 03498a8f4f..f53bf4be22 100644 --- a/configs/MPC8536DS_defconfig +++ b/configs/MPC8536DS_defconfig @@ -10,9 +10,10 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/MPC8541CDS_defconfig b/configs/MPC8541CDS_defconfig index e0cd93515e..2d8845aa1e 100644 --- a/configs/MPC8541CDS_defconfig +++ b/configs/MPC8541CDS_defconfig @@ -7,7 +7,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set diff --git a/configs/MPC8541CDS_legacy_defconfig b/configs/MPC8541CDS_legacy_defconfig index ef3c80390f..d7650c18bb 100644 --- a/configs/MPC8541CDS_legacy_defconfig +++ b/configs/MPC8541CDS_legacy_defconfig @@ -8,7 +8,9 @@ CONFIG_SYS_EXTRA_OPTIONS="LEGACY" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set diff --git a/configs/MPC8544DS_defconfig b/configs/MPC8544DS_defconfig index 3508e0a209..3e75de7f46 100644 --- a/configs/MPC8544DS_defconfig +++ b/configs/MPC8544DS_defconfig @@ -9,14 +9,15 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set CONFIG_CMD_EXT2=y -CONFIG_SCSI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y @@ -24,6 +25,7 @@ CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_RTL8139=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index e5db130189..a138e52ce1 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -8,6 +8,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index bab25058f0..f49ddbc27f 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -7,6 +7,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index d8daabc11a..9c1421cdb7 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -8,6 +8,7 @@ CONFIG_SYS_EXTRA_OPTIONS="LEGACY" CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set diff --git a/configs/MPC8555CDS_defconfig b/configs/MPC8555CDS_defconfig index cb37d9ac35..54ab7e1923 100644 --- a/configs/MPC8555CDS_defconfig +++ b/configs/MPC8555CDS_defconfig @@ -7,7 +7,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set diff --git a/configs/MPC8555CDS_legacy_defconfig b/configs/MPC8555CDS_legacy_defconfig index a74024ce97..f6a4877d23 100644 --- a/configs/MPC8555CDS_legacy_defconfig +++ b/configs/MPC8555CDS_legacy_defconfig @@ -8,7 +8,9 @@ CONFIG_SYS_EXTRA_OPTIONS="LEGACY" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set diff --git a/configs/MPC8568MDS_defconfig b/configs/MPC8568MDS_defconfig index 4924bef0cc..99e6cbd2d2 100644 --- a/configs/MPC8568MDS_defconfig +++ b/configs/MPC8568MDS_defconfig @@ -8,7 +8,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8569MDS_ATM_defconfig b/configs/MPC8569MDS_ATM_defconfig index b713db43ad..cca2701b79 100644 --- a/configs/MPC8569MDS_ATM_defconfig +++ b/configs/MPC8569MDS_ATM_defconfig @@ -9,8 +9,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8569MDS_defconfig b/configs/MPC8569MDS_defconfig index 96f7755f5d..c01ca60dd4 100644 --- a/configs/MPC8569MDS_defconfig +++ b/configs/MPC8569MDS_defconfig @@ -8,8 +8,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8572DS_36BIT_defconfig b/configs/MPC8572DS_36BIT_defconfig index 673d7ce4b6..4a3a7e0f7c 100644 --- a/configs/MPC8572DS_36BIT_defconfig +++ b/configs/MPC8572DS_36BIT_defconfig @@ -10,7 +10,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8572DS_defconfig b/configs/MPC8572DS_defconfig index c5599c9868..9af509ffd8 100644 --- a/configs/MPC8572DS_defconfig +++ b/configs/MPC8572DS_defconfig @@ -9,7 +9,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/MPC8610HPCD_defconfig b/configs/MPC8610HPCD_defconfig index 6aef6d8434..c71d5b18e1 100644 --- a/configs/MPC8610HPCD_defconfig +++ b/configs/MPC8610HPCD_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y @@ -15,9 +16,9 @@ CONFIG_CMD_PING=y CONFIG_CMD_BMP=y CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y -CONFIG_SCSI=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_KEYBOARD=y diff --git a/configs/MPC8641HPCN_36BIT_defconfig b/configs/MPC8641HPCN_36BIT_defconfig index bf7179fd25..9949e8b699 100644 --- a/configs/MPC8641HPCN_36BIT_defconfig +++ b/configs/MPC8641HPCN_36BIT_defconfig @@ -9,6 +9,7 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y diff --git a/configs/MPC8641HPCN_defconfig b/configs/MPC8641HPCN_defconfig index 11b2ed27a0..c8440d2584 100644 --- a/configs/MPC8641HPCN_defconfig +++ b/configs/MPC8641HPCN_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=10 # CONFIG_CONSOLE_MUX is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 516a16f73e..015b4d5814 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -11,7 +11,7 @@ CONFIG_SPL=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_SUN4I_EMAC=y CONFIG_SUNXI_NO_PMIC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 0c9e8d1693..1ca92e0972 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -15,6 +15,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_SUN4I_EMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index 400a16505a..d316c75c83 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -16,7 +16,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/MigoR_defconfig b/configs/MigoR_defconfig index b8e2da2678..760e57e312 100644 --- a/configs/MigoR_defconfig +++ b/configs/MigoR_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_MIGOR=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 root=1f01" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -13,6 +15,7 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index ed3e6786c6..5602d3c8e2 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -19,8 +19,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 56f405ceed..5808d5df1b 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -21,8 +21,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig index 95b39f07ec..97c5e85f64 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index 92840f5e6f..00cc88b433 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -12,20 +11,22 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -34,6 +35,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig index 794cc4c68c..fa07a21ac0 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index 3ef45a4f1f..70ce4869eb 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index 9818e7ce2b..c1bf68090d 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -21,9 +21,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig index 152d8854d6..be3545c30a 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index b1e8f02658..3e79a22738 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -22,9 +22,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig index 070acd74d0..7aa6433a4c 100644 --- a/configs/P1010RDB-PA_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_NAND_SECBOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index 6d776820d7..e20bc7fad0 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -11,20 +10,22 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig index 42266b93a7..f026bdad18 100644 --- a/configs/P1010RDB-PA_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_NOR_SECBOOT_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index 4a403b90c4..a313c9383f 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -10,9 +10,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 2c9d661ef2..5c7953b1b2 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig index 223f15aaf9..ecf525226f 100644 --- a/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index eba9cae18f..900ea191cc 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -21,9 +21,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig index 140e6bb4ed..f57c4f46fe 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 3ac7bdecb7..95d07c23ef 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -12,20 +11,22 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -34,6 +35,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig index 20bbac4bbd..c7920adf8e 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index 528be16121..93295bb9bb 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index ba83da3f88..a907d4d69e 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -21,9 +21,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig index 5298c1304b..121504d467 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index 1708e2e630..88af7ab6cc 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -22,9 +22,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig index 4a3f65401d..7612cc2db5 100644 --- a/configs/P1010RDB-PB_NAND_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_NAND_SECBOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 1fbd23adfe..749d4f5332 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y @@ -11,21 +10,22 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_TPL=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -34,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig index f29114e5e1..f1e3a14928 100644 --- a/configs/P1010RDB-PB_NOR_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_NOR_SECBOOT_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 2c155956b8..0b02ad3142 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -10,9 +10,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index 39cc555353..6c915407d6 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig index 530256e979..2b22ab523a 100644 --- a/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 2c0b2ff2e0..fef4527d6d 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -21,9 +21,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020MBG-PC_36BIT_SDCARD_defconfig b/configs/P1020MBG-PC_36BIT_SDCARD_defconfig index d037985165..a6ed6bc8fc 100644 --- a/configs/P1020MBG-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020MBG-PC_36BIT_SDCARD_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020MBG-PC_36BIT_defconfig b/configs/P1020MBG-PC_36BIT_defconfig index 8cb4b5a478..41a693a568 100644 --- a/configs/P1020MBG-PC_36BIT_defconfig +++ b/configs/P1020MBG-PC_36BIT_defconfig @@ -11,9 +11,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020MBG-PC_SDCARD_defconfig b/configs/P1020MBG-PC_SDCARD_defconfig index 63bb57fd39..1d90f1acec 100644 --- a/configs/P1020MBG-PC_SDCARD_defconfig +++ b/configs/P1020MBG-PC_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020MBG-PC_defconfig b/configs/P1020MBG-PC_defconfig index 6a1777aea0..951c32616d 100644 --- a/configs/P1020MBG-PC_defconfig +++ b/configs/P1020MBG-PC_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index 50aa9d2851..65b8b05223 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -12,7 +11,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -21,10 +19,12 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +33,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index a340ab2ecf..933efc47b9 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 47582a349b..19d5e9289f 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -21,9 +21,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index 85a3b2df60..ca060bc2f9 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -11,9 +11,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index fd4e41a357..d949956bef 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,10 +18,12 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -32,6 +32,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index 3dbbe13512..2c23c8fc50 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index a4f5fda7ec..8904b0e98b 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 4861649a04..da83805df1 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index 2ca1233f0b..fc9c491988 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,10 +18,12 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +33,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 29f15c58bb..e315c5a6c9 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index 1e6be967ba..605b537d53 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index fc4ef855f8..ea61eb6b06 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020UTM-PC_36BIT_SDCARD_defconfig b/configs/P1020UTM-PC_36BIT_SDCARD_defconfig index 454d89b6c9..befca45c4d 100644 --- a/configs/P1020UTM-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020UTM-PC_36BIT_SDCARD_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020UTM-PC_36BIT_defconfig b/configs/P1020UTM-PC_36BIT_defconfig index 17eca5711c..5c20a628d3 100644 --- a/configs/P1020UTM-PC_36BIT_defconfig +++ b/configs/P1020UTM-PC_36BIT_defconfig @@ -11,9 +11,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020UTM-PC_SDCARD_defconfig b/configs/P1020UTM-PC_SDCARD_defconfig index d937e8c3b2..383adc7e0f 100644 --- a/configs/P1020UTM-PC_SDCARD_defconfig +++ b/configs/P1020UTM-PC_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1020UTM-PC_defconfig b/configs/P1020UTM-PC_defconfig index c1e74a3968..81a380d57f 100644 --- a/configs/P1020UTM-PC_defconfig +++ b/configs/P1020UTM-PC_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig index a79b686d7d..5b42386e4f 100644 --- a/configs/P1021RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -12,7 +11,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -21,10 +19,13 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -34,6 +35,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig index 25010b8541..398d68f794 100644 --- a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig @@ -20,9 +20,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig index 1c55714e2e..b96a85e6af 100644 --- a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig @@ -21,9 +21,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1021RDB-PC_36BIT_defconfig b/configs/P1021RDB-PC_36BIT_defconfig index 3f15d8e230..e15b49809c 100644 --- a/configs/P1021RDB-PC_36BIT_defconfig +++ b/configs/P1021RDB-PC_36BIT_defconfig @@ -11,9 +11,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig index 48f8c90dd1..753863ff12 100644 --- a/configs/P1021RDB-PC_NAND_defconfig +++ b/configs/P1021RDB-PC_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,10 +18,13 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1021RDB-PC_SDCARD_defconfig b/configs/P1021RDB-PC_SDCARD_defconfig index fca77ab39a..aeff81342c 100644 --- a/configs/P1021RDB-PC_SDCARD_defconfig +++ b/configs/P1021RDB-PC_SDCARD_defconfig @@ -19,9 +19,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1021RDB-PC_SPIFLASH_defconfig b/configs/P1021RDB-PC_SPIFLASH_defconfig index ca4cb28b55..fb8b6171fe 100644 --- a/configs/P1021RDB-PC_SPIFLASH_defconfig +++ b/configs/P1021RDB-PC_SPIFLASH_defconfig @@ -20,9 +20,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1021RDB-PC_defconfig b/configs/P1021RDB-PC_defconfig index ca49738027..3d43443714 100644 --- a/configs/P1021RDB-PC_defconfig +++ b/configs/P1021RDB-PC_defconfig @@ -10,9 +10,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1022DS_36BIT_NAND_defconfig b/configs/P1022DS_36BIT_NAND_defconfig index 0965cd7f24..a20407777a 100644 --- a/configs/P1022DS_36BIT_NAND_defconfig +++ b/configs/P1022DS_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,11 +18,15 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +35,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1022DS_36BIT_SDCARD_defconfig b/configs/P1022DS_36BIT_SDCARD_defconfig index b029badd6d..0d3159fa76 100644 --- a/configs/P1022DS_36BIT_SDCARD_defconfig +++ b/configs/P1022DS_36BIT_SDCARD_defconfig @@ -19,10 +19,12 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1022DS_36BIT_SPIFLASH_defconfig b/configs/P1022DS_36BIT_SPIFLASH_defconfig index 9e88f292c8..7ed47785bd 100644 --- a/configs/P1022DS_36BIT_SPIFLASH_defconfig +++ b/configs/P1022DS_36BIT_SPIFLASH_defconfig @@ -20,10 +20,12 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1022DS_36BIT_defconfig b/configs/P1022DS_36BIT_defconfig index c534d38215..440b68720a 100644 --- a/configs/P1022DS_36BIT_defconfig +++ b/configs/P1022DS_36BIT_defconfig @@ -10,10 +10,12 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1022DS_NAND_defconfig b/configs/P1022DS_NAND_defconfig index 1a1822f686..2ca4b572c6 100644 --- a/configs/P1022DS_NAND_defconfig +++ b/configs/P1022DS_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y @@ -10,7 +9,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,11 +18,14 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1022DS_SDCARD_defconfig b/configs/P1022DS_SDCARD_defconfig index a92a5f1740..5e242fc94e 100644 --- a/configs/P1022DS_SDCARD_defconfig +++ b/configs/P1022DS_SDCARD_defconfig @@ -18,10 +18,12 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1022DS_SPIFLASH_defconfig b/configs/P1022DS_SPIFLASH_defconfig index 66bd93ab61..17d3efe14e 100644 --- a/configs/P1022DS_SPIFLASH_defconfig +++ b/configs/P1022DS_SPIFLASH_defconfig @@ -19,10 +19,12 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1022DS_defconfig b/configs/P1022DS_defconfig index 52f4c8d259..64c9d0de94 100644 --- a/configs/P1022DS_defconfig +++ b/configs/P1022DS_defconfig @@ -9,10 +9,12 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1023RDB_defconfig b/configs/P1023RDB_defconfig index 84e89a119d..ddb1acfe01 100644 --- a/configs/P1023RDB_defconfig +++ b/configs/P1023RDB_defconfig @@ -10,9 +10,11 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y # CONFIG_CMD_EEPROM is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1024RDB_36BIT_defconfig b/configs/P1024RDB_36BIT_defconfig index aa7b4539f3..56b354f26e 100644 --- a/configs/P1024RDB_36BIT_defconfig +++ b/configs/P1024RDB_36BIT_defconfig @@ -11,9 +11,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1024RDB_NAND_defconfig b/configs/P1024RDB_NAND_defconfig index e007604470..b6b8195164 100644 --- a/configs/P1024RDB_NAND_defconfig +++ b/configs/P1024RDB_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,10 +18,12 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -32,6 +32,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1024RDB_SDCARD_defconfig b/configs/P1024RDB_SDCARD_defconfig index ed4b8556dc..a0308096ec 100644 --- a/configs/P1024RDB_SDCARD_defconfig +++ b/configs/P1024RDB_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1024RDB_SPIFLASH_defconfig b/configs/P1024RDB_SPIFLASH_defconfig index bdb61d34e6..82797b33f0 100644 --- a/configs/P1024RDB_SPIFLASH_defconfig +++ b/configs/P1024RDB_SPIFLASH_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1024RDB_defconfig b/configs/P1024RDB_defconfig index 459030a0ff..e3f755a48d 100644 --- a/configs/P1024RDB_defconfig +++ b/configs/P1024RDB_defconfig @@ -10,9 +10,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1025RDB_36BIT_defconfig b/configs/P1025RDB_36BIT_defconfig index 4a2ba1a71b..ad5a933852 100644 --- a/configs/P1025RDB_36BIT_defconfig +++ b/configs/P1025RDB_36BIT_defconfig @@ -11,10 +11,11 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig index 28ba22a1ff..c1ea44ae31 100644 --- a/configs/P1025RDB_NAND_defconfig +++ b/configs/P1025RDB_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -21,11 +19,13 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -34,6 +34,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P1025RDB_SDCARD_defconfig b/configs/P1025RDB_SDCARD_defconfig index 45d344856b..0e5b9193b3 100644 --- a/configs/P1025RDB_SDCARD_defconfig +++ b/configs/P1025RDB_SDCARD_defconfig @@ -19,10 +19,11 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1025RDB_SPIFLASH_defconfig b/configs/P1025RDB_SPIFLASH_defconfig index fe12f10283..a4b781a4be 100644 --- a/configs/P1025RDB_SPIFLASH_defconfig +++ b/configs/P1025RDB_SPIFLASH_defconfig @@ -20,10 +20,11 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P1025RDB_defconfig b/configs/P1025RDB_defconfig index 66d306f320..e50e5f21ec 100644 --- a/configs/P1025RDB_defconfig +++ b/configs/P1025RDB_defconfig @@ -10,10 +10,11 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index e470f3198c..5f71732262 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -12,7 +11,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -22,10 +20,12 @@ CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -35,6 +35,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index d72a8f0a98..fdb56a53a3 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -20,9 +20,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index b2e7c8c517..59f131d219 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -21,9 +21,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index 595c4721f1..347340d29a 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -11,9 +11,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index e1ce591262..b58fae4f6d 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -2,7 +2,6 @@ CONFIG_PPC=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_MPC85xx=y # CONFIG_CMD_ERRATA is not set @@ -11,7 +10,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y @@ -20,10 +18,13 @@ CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index d3069e1c29..3c9485a456 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -19,9 +19,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 5bae5eefd7..6df108df7c 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -20,9 +20,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index a16ef43b08..d533c8e156 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -10,9 +10,10 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 5e0ee668a6..13eb21cb37 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -5,15 +5,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -22,6 +22,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index 4ff07aba83..7de73da9f1 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P2041RDB_SECURE_BOOT_defconfig b/configs/P2041RDB_SECURE_BOOT_defconfig index bd70cc528a..386c1b8c6e 100644 --- a/configs/P2041RDB_SECURE_BOOT_defconfig +++ b/configs/P2041RDB_SECURE_BOOT_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 13a889f21f..3c661b46da 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig b/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig index 1edd5af7d5..2fd2cffbdf 100644 --- a/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/P2041RDB_SRIO_PCIE_BOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index f12e388698..bec6ba895a 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -10,9 +10,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P3041DS_NAND_SECURE_BOOT_defconfig b/configs/P3041DS_NAND_SECURE_BOOT_defconfig index 1a43f200ea..0139522f8e 100644 --- a/configs/P3041DS_NAND_SECURE_BOOT_defconfig +++ b/configs/P3041DS_NAND_SECURE_BOOT_defconfig @@ -7,14 +7,14 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -23,6 +23,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig index 7c2acb9366..5916759a52 100644 --- a/configs/P3041DS_NAND_defconfig +++ b/configs/P3041DS_NAND_defconfig @@ -5,15 +5,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -22,6 +22,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig index 1cffa325fa..5dc43f73a2 100644 --- a/configs/P3041DS_SDCARD_defconfig +++ b/configs/P3041DS_SDCARD_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P3041DS_SECURE_BOOT_defconfig b/configs/P3041DS_SECURE_BOOT_defconfig index 6c7a0c3b02..5bf425f728 100644 --- a/configs/P3041DS_SECURE_BOOT_defconfig +++ b/configs/P3041DS_SECURE_BOOT_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig index 961cce831c..0f5f5c59b9 100644 --- a/configs/P3041DS_SPIFLASH_defconfig +++ b/configs/P3041DS_SPIFLASH_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P3041DS_SRIO_PCIE_BOOT_defconfig b/configs/P3041DS_SRIO_PCIE_BOOT_defconfig index 039da15ed9..28dbdb9e90 100644 --- a/configs/P3041DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P3041DS_SRIO_PCIE_BOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig index ea89d9c991..d2942ded06 100644 --- a/configs/P3041DS_defconfig +++ b/configs/P3041DS_defconfig @@ -10,9 +10,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P4080DS_SDCARD_defconfig b/configs/P4080DS_SDCARD_defconfig index 9922bbcce3..0ca0afac64 100644 --- a/configs/P4080DS_SDCARD_defconfig +++ b/configs/P4080DS_SDCARD_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P4080DS_SECURE_BOOT_defconfig b/configs/P4080DS_SECURE_BOOT_defconfig index 1083f8a53e..97f05b5394 100644 --- a/configs/P4080DS_SECURE_BOOT_defconfig +++ b/configs/P4080DS_SECURE_BOOT_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P4080DS_SPIFLASH_defconfig b/configs/P4080DS_SPIFLASH_defconfig index 5e9bf977e0..176c4b1565 100644 --- a/configs/P4080DS_SPIFLASH_defconfig +++ b/configs/P4080DS_SPIFLASH_defconfig @@ -11,9 +11,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P4080DS_SRIO_PCIE_BOOT_defconfig b/configs/P4080DS_SRIO_PCIE_BOOT_defconfig index 2bf1299d2f..ed91c776e0 100644 --- a/configs/P4080DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P4080DS_SRIO_PCIE_BOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P4080DS_defconfig b/configs/P4080DS_defconfig index 71a6993bb8..1ee58d8fff 100644 --- a/configs/P4080DS_defconfig +++ b/configs/P4080DS_defconfig @@ -10,9 +10,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5020DS_NAND_SECURE_BOOT_defconfig b/configs/P5020DS_NAND_SECURE_BOOT_defconfig index 7af118bca9..40924af48a 100644 --- a/configs/P5020DS_NAND_SECURE_BOOT_defconfig +++ b/configs/P5020DS_NAND_SECURE_BOOT_defconfig @@ -7,15 +7,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -24,6 +24,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P5020DS_NAND_defconfig b/configs/P5020DS_NAND_defconfig index 0c7aa23090..e8bb6669f3 100644 --- a/configs/P5020DS_NAND_defconfig +++ b/configs/P5020DS_NAND_defconfig @@ -5,16 +5,16 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -23,6 +23,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P5020DS_SDCARD_defconfig b/configs/P5020DS_SDCARD_defconfig index 71f2c8938c..3d983ba2e8 100644 --- a/configs/P5020DS_SDCARD_defconfig +++ b/configs/P5020DS_SDCARD_defconfig @@ -11,10 +11,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5020DS_SECURE_BOOT_defconfig b/configs/P5020DS_SECURE_BOOT_defconfig index 91cfc65b13..20bad18876 100644 --- a/configs/P5020DS_SECURE_BOOT_defconfig +++ b/configs/P5020DS_SECURE_BOOT_defconfig @@ -11,10 +11,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5020DS_SPIFLASH_defconfig b/configs/P5020DS_SPIFLASH_defconfig index f3f5cb8863..edc2b9b50a 100644 --- a/configs/P5020DS_SPIFLASH_defconfig +++ b/configs/P5020DS_SPIFLASH_defconfig @@ -11,10 +11,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5020DS_SRIO_PCIE_BOOT_defconfig b/configs/P5020DS_SRIO_PCIE_BOOT_defconfig index c2d7313800..115fa7663a 100644 --- a/configs/P5020DS_SRIO_PCIE_BOOT_defconfig +++ b/configs/P5020DS_SRIO_PCIE_BOOT_defconfig @@ -13,10 +13,10 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5020DS_defconfig b/configs/P5020DS_defconfig index 94995215f2..5440f2cc69 100644 --- a/configs/P5020DS_defconfig +++ b/configs/P5020DS_defconfig @@ -10,10 +10,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5040DS_NAND_SECURE_BOOT_defconfig b/configs/P5040DS_NAND_SECURE_BOOT_defconfig index 183344b6da..3b7934c0e6 100644 --- a/configs/P5040DS_NAND_SECURE_BOOT_defconfig +++ b/configs/P5040DS_NAND_SECURE_BOOT_defconfig @@ -7,15 +7,15 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -24,6 +24,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig index 00d508ea02..d2ee9b0230 100644 --- a/configs/P5040DS_NAND_defconfig +++ b/configs/P5040DS_NAND_defconfig @@ -5,16 +5,16 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF40000" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF40000" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -23,6 +23,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig index 86ea9314c1..de0cd8508f 100644 --- a/configs/P5040DS_SDCARD_defconfig +++ b/configs/P5040DS_SDCARD_defconfig @@ -11,10 +11,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5040DS_SECURE_BOOT_defconfig b/configs/P5040DS_SECURE_BOOT_defconfig index 4a80242c95..814a9a2ee7 100644 --- a/configs/P5040DS_SECURE_BOOT_defconfig +++ b/configs/P5040DS_SECURE_BOOT_defconfig @@ -11,10 +11,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig index 5793781f94..63db5c8156 100644 --- a/configs/P5040DS_SPIFLASH_defconfig +++ b/configs/P5040DS_SPIFLASH_defconfig @@ -11,10 +11,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig index 13bfaf8a3e..d8f28dee10 100644 --- a/configs/P5040DS_defconfig +++ b/configs/P5040DS_defconfig @@ -10,10 +10,10 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index d1b5b22689..c11c3a6c81 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -15,8 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set diff --git a/configs/T1023RDB_NAND_defconfig b/configs/T1023RDB_NAND_defconfig index 805d397f3c..2a0ec8386e 100644 --- a/configs/T1023RDB_NAND_defconfig +++ b/configs/T1023RDB_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -23,9 +23,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -36,6 +36,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/T1023RDB_SDCARD_defconfig b/configs/T1023RDB_SDCARD_defconfig index 0b4d256062..e50eb7a991 100644 --- a/configs/T1023RDB_SDCARD_defconfig +++ b/configs/T1023RDB_SDCARD_defconfig @@ -23,9 +23,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1023RDB_SECURE_BOOT_defconfig b/configs/T1023RDB_SECURE_BOOT_defconfig index 0c33a3d192..0c81e91e84 100644 --- a/configs/T1023RDB_SECURE_BOOT_defconfig +++ b/configs/T1023RDB_SECURE_BOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1023RDB_SPIFLASH_defconfig b/configs/T1023RDB_SPIFLASH_defconfig index 0cb278daa3..1a55c96f9e 100644 --- a/configs/T1023RDB_SPIFLASH_defconfig +++ b/configs/T1023RDB_SPIFLASH_defconfig @@ -24,9 +24,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1023RDB_defconfig b/configs/T1023RDB_defconfig index da59c263e2..a6fd4b172e 100644 --- a/configs/T1023RDB_defconfig +++ b/configs/T1023RDB_defconfig @@ -11,9 +11,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024QDS_DDR4_SECURE_BOOT_defconfig b/configs/T1024QDS_DDR4_SECURE_BOOT_defconfig index e87b085519..8ec02060da 100644 --- a/configs/T1024QDS_DDR4_SECURE_BOOT_defconfig +++ b/configs/T1024QDS_DDR4_SECURE_BOOT_defconfig @@ -15,9 +15,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024QDS_DDR4_defconfig b/configs/T1024QDS_DDR4_defconfig index 454dbf6cc4..353cdb91a0 100644 --- a/configs/T1024QDS_DDR4_defconfig +++ b/configs/T1024QDS_DDR4_defconfig @@ -14,9 +14,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024QDS_NAND_defconfig b/configs/T1024QDS_NAND_defconfig index d18068d730..f855574c98 100644 --- a/configs/T1024QDS_NAND_defconfig +++ b/configs/T1024QDS_NAND_defconfig @@ -11,7 +11,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SILENT_CONSOLE=y @@ -24,9 +24,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -38,6 +38,7 @@ CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/T1024QDS_SDCARD_defconfig b/configs/T1024QDS_SDCARD_defconfig index 729a49be86..2c2a2879d1 100644 --- a/configs/T1024QDS_SDCARD_defconfig +++ b/configs/T1024QDS_SDCARD_defconfig @@ -24,9 +24,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024QDS_SECURE_BOOT_defconfig b/configs/T1024QDS_SECURE_BOOT_defconfig index 402a9693ed..20b1e3d7b5 100644 --- a/configs/T1024QDS_SECURE_BOOT_defconfig +++ b/configs/T1024QDS_SECURE_BOOT_defconfig @@ -15,9 +15,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024QDS_SPIFLASH_defconfig b/configs/T1024QDS_SPIFLASH_defconfig index c669309f1d..d7fbaa776f 100644 --- a/configs/T1024QDS_SPIFLASH_defconfig +++ b/configs/T1024QDS_SPIFLASH_defconfig @@ -25,9 +25,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024QDS_defconfig b/configs/T1024QDS_defconfig index f7af9d590e..cdf6af5ae1 100644 --- a/configs/T1024QDS_defconfig +++ b/configs/T1024QDS_defconfig @@ -14,9 +14,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig index e06fcbd96b..959aa317a3 100644 --- a/configs/T1024RDB_NAND_defconfig +++ b/configs/T1024RDB_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SILENT_CONSOLE=y @@ -23,9 +23,9 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -36,6 +36,7 @@ CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig index 2b1b9a0f72..a9f8e0b440 100644 --- a/configs/T1024RDB_SDCARD_defconfig +++ b/configs/T1024RDB_SDCARD_defconfig @@ -23,9 +23,9 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024RDB_SECURE_BOOT_defconfig b/configs/T1024RDB_SECURE_BOOT_defconfig index b0d637c980..0daabfcd19 100644 --- a/configs/T1024RDB_SECURE_BOOT_defconfig +++ b/configs/T1024RDB_SECURE_BOOT_defconfig @@ -14,9 +14,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig index e3d4b066d2..020b92ceee 100644 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -24,9 +24,9 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig index b2046ee1fd..ee46114fb4 100644 --- a/configs/T1024RDB_defconfig +++ b/configs/T1024RDB_defconfig @@ -13,9 +13,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040D4RDB_NAND_defconfig b/configs/T1040D4RDB_NAND_defconfig index b6657869eb..b3dc1ae82f 100644 --- a/configs/T1040D4RDB_NAND_defconfig +++ b/configs/T1040D4RDB_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SILENT_CONSOLE=y @@ -22,9 +22,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -34,6 +34,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T1040D4RDB_SDCARD_defconfig b/configs/T1040D4RDB_SDCARD_defconfig index 542216d99c..2397846073 100644 --- a/configs/T1040D4RDB_SDCARD_defconfig +++ b/configs/T1040D4RDB_SDCARD_defconfig @@ -22,9 +22,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040D4RDB_SECURE_BOOT_defconfig b/configs/T1040D4RDB_SECURE_BOOT_defconfig index f761bec0b1..91bc7a0587 100644 --- a/configs/T1040D4RDB_SECURE_BOOT_defconfig +++ b/configs/T1040D4RDB_SECURE_BOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040D4RDB_SPIFLASH_defconfig b/configs/T1040D4RDB_SPIFLASH_defconfig index 2b45a42900..c35a9b9e4e 100644 --- a/configs/T1040D4RDB_SPIFLASH_defconfig +++ b/configs/T1040D4RDB_SPIFLASH_defconfig @@ -23,9 +23,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040D4RDB_defconfig b/configs/T1040D4RDB_defconfig index 6dcfe7aa1a..2eb8701b05 100644 --- a/configs/T1040D4RDB_defconfig +++ b/configs/T1040D4RDB_defconfig @@ -12,9 +12,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040QDS_DDR4_defconfig b/configs/T1040QDS_DDR4_defconfig index f0c0a5430a..a6bc013266 100644 --- a/configs/T1040QDS_DDR4_defconfig +++ b/configs/T1040QDS_DDR4_defconfig @@ -14,9 +14,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040QDS_SECURE_BOOT_defconfig b/configs/T1040QDS_SECURE_BOOT_defconfig index 15f0a83186..9910f24ff4 100644 --- a/configs/T1040QDS_SECURE_BOOT_defconfig +++ b/configs/T1040QDS_SECURE_BOOT_defconfig @@ -15,9 +15,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040QDS_defconfig b/configs/T1040QDS_defconfig index 643e1db7a1..ae97b4d38b 100644 --- a/configs/T1040QDS_defconfig +++ b/configs/T1040QDS_defconfig @@ -14,9 +14,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig index 21d060c0e1..0bffdf804f 100644 --- a/configs/T1040RDB_NAND_defconfig +++ b/configs/T1040RDB_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SILENT_CONSOLE=y @@ -22,9 +22,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -35,6 +35,7 @@ CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig index 9e0562f4c1..202fa67bdc 100644 --- a/configs/T1040RDB_SDCARD_defconfig +++ b/configs/T1040RDB_SDCARD_defconfig @@ -22,9 +22,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig index 72015c3b51..f6cf68fa94 100644 --- a/configs/T1040RDB_SECURE_BOOT_defconfig +++ b/configs/T1040RDB_SECURE_BOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig index b52f947003..be7cf065bb 100644 --- a/configs/T1040RDB_SPIFLASH_defconfig +++ b/configs/T1040RDB_SPIFLASH_defconfig @@ -23,9 +23,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig index 6ad61cba7d..6385528c89 100644 --- a/configs/T1040RDB_defconfig +++ b/configs/T1040RDB_defconfig @@ -12,9 +12,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig index c02fc20693..3d955ebc7d 100644 --- a/configs/T1042D4RDB_NAND_defconfig +++ b/configs/T1042D4RDB_NAND_defconfig @@ -11,7 +11,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SILENT_CONSOLE=y @@ -24,9 +24,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -36,6 +36,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig index 7ef3af09db..699963910f 100644 --- a/configs/T1042D4RDB_SDCARD_defconfig +++ b/configs/T1042D4RDB_SDCARD_defconfig @@ -24,9 +24,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042D4RDB_SECURE_BOOT_defconfig b/configs/T1042D4RDB_SECURE_BOOT_defconfig index da143fb88b..1692b47fa5 100644 --- a/configs/T1042D4RDB_SECURE_BOOT_defconfig +++ b/configs/T1042D4RDB_SECURE_BOOT_defconfig @@ -15,9 +15,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig index 52c5d71143..9ef95eb0a9 100644 --- a/configs/T1042D4RDB_SPIFLASH_defconfig +++ b/configs/T1042D4RDB_SPIFLASH_defconfig @@ -25,9 +25,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig index 47a614ff6a..227d131919 100644 --- a/configs/T1042D4RDB_defconfig +++ b/configs/T1042D4RDB_defconfig @@ -14,9 +14,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig b/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig index 9a0fa33717..3a8e7e7b9d 100644 --- a/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig +++ b/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig @@ -12,7 +12,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_BOOTDELAY=0 CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set @@ -26,9 +26,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -41,6 +41,7 @@ CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_SYS_FSL_DDR3=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T1042RDB_PI_NAND_defconfig b/configs/T1042RDB_PI_NAND_defconfig index adae1bf4cc..836b65100c 100644 --- a/configs/T1042RDB_PI_NAND_defconfig +++ b/configs/T1042RDB_PI_NAND_defconfig @@ -11,7 +11,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SILENT_CONSOLE=y @@ -24,9 +24,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -38,6 +38,7 @@ CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T1042RDB_PI_SDCARD_defconfig b/configs/T1042RDB_PI_SDCARD_defconfig index de3da63194..3c7c972aa7 100644 --- a/configs/T1042RDB_PI_SDCARD_defconfig +++ b/configs/T1042RDB_PI_SDCARD_defconfig @@ -24,9 +24,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042RDB_PI_SPIFLASH_defconfig b/configs/T1042RDB_PI_SPIFLASH_defconfig index 4784015bb4..3e6fc50e59 100644 --- a/configs/T1042RDB_PI_SPIFLASH_defconfig +++ b/configs/T1042RDB_PI_SPIFLASH_defconfig @@ -25,9 +25,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042RDB_PI_defconfig b/configs/T1042RDB_PI_defconfig index 4c9b81693d..cc1d51be5c 100644 --- a/configs/T1042RDB_PI_defconfig +++ b/configs/T1042RDB_PI_defconfig @@ -14,9 +14,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042RDB_SECURE_BOOT_defconfig b/configs/T1042RDB_SECURE_BOOT_defconfig index c5ad1b8d6e..b43bfdd7d3 100644 --- a/configs/T1042RDB_SECURE_BOOT_defconfig +++ b/configs/T1042RDB_SECURE_BOOT_defconfig @@ -13,9 +13,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig index 8e1e8be727..157ee0aa0b 100644 --- a/configs/T1042RDB_defconfig +++ b/configs/T1042RDB_defconfig @@ -12,9 +12,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index b429efb5cf..a8fae86f51 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -31,6 +31,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index 9540e5054b..4e24dfce4a 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index 6c24de3c3e..5b341aa5d2 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -10,9 +10,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index 46ad7193ea..25e1354327 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index 86cd734fb6..6a45691a6c 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index d48a9702b5..f10e842556 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index b985ccec78..3a70533db2 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -32,6 +32,7 @@ CONFIG_CMD_MTDPARTS=y # CONFIG_CMD_IRQ is not set CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index 800e9386eb..640e381eac 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080RDB_SECURE_BOOT_defconfig b/configs/T2080RDB_SECURE_BOOT_defconfig index dc91bbc288..ec6f975ab1 100644 --- a/configs/T2080RDB_SECURE_BOOT_defconfig +++ b/configs/T2080RDB_SECURE_BOOT_defconfig @@ -10,9 +10,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 6e011f9f68..62828c6d40 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig index 88302288d5..d73b32f241 100644 --- a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 2673e0d047..eb53659337 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2081QDS_NAND_defconfig b/configs/T2081QDS_NAND_defconfig index 0e94c70d08..44af90c3d6 100644 --- a/configs/T2081QDS_NAND_defconfig +++ b/configs/T2081QDS_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -31,6 +31,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_EON=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/T2081QDS_SDCARD_defconfig b/configs/T2081QDS_SDCARD_defconfig index e591d3790c..793a400fb6 100644 --- a/configs/T2081QDS_SDCARD_defconfig +++ b/configs/T2081QDS_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2081QDS_SPIFLASH_defconfig b/configs/T2081QDS_SPIFLASH_defconfig index edcb29b2a6..9b92fc996e 100644 --- a/configs/T2081QDS_SPIFLASH_defconfig +++ b/configs/T2081QDS_SPIFLASH_defconfig @@ -20,9 +20,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig index a4b88702b0..beb3e1a5c7 100644 --- a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T2081QDS_defconfig b/configs/T2081QDS_defconfig index d1905fe446..4ae727a4ba 100644 --- a/configs/T2081QDS_defconfig +++ b/configs/T2081QDS_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4160QDS_NAND_defconfig b/configs/T4160QDS_NAND_defconfig index 885ec05504..8144484fbf 100644 --- a/configs/T4160QDS_NAND_defconfig +++ b/configs/T4160QDS_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -30,6 +30,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y diff --git a/configs/T4160QDS_SDCARD_defconfig b/configs/T4160QDS_SDCARD_defconfig index 5337f1a48d..16f7ecdd22 100644 --- a/configs/T4160QDS_SDCARD_defconfig +++ b/configs/T4160QDS_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4160QDS_SECURE_BOOT_defconfig b/configs/T4160QDS_SECURE_BOOT_defconfig index 50609219fd..1d13bcfce3 100644 --- a/configs/T4160QDS_SECURE_BOOT_defconfig +++ b/configs/T4160QDS_SECURE_BOOT_defconfig @@ -10,9 +10,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4160QDS_defconfig b/configs/T4160QDS_defconfig index cecff55bd9..3aa3aeee0c 100644 --- a/configs/T4160QDS_defconfig +++ b/configs/T4160QDS_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4160RDB_defconfig b/configs/T4160RDB_defconfig index 4c095466ca..eb223e7f61 100644 --- a/configs/T4160RDB_defconfig +++ b/configs/T4160RDB_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4240QDS_NAND_defconfig b/configs/T4240QDS_NAND_defconfig index 68bb9894e1..54836eab7d 100644 --- a/configs/T4240QDS_NAND_defconfig +++ b/configs/T4240QDS_NAND_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND" +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -30,6 +30,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SST=y CONFIG_PHYLIB=y diff --git a/configs/T4240QDS_SDCARD_defconfig b/configs/T4240QDS_SDCARD_defconfig index be4b1d8717..3a0b7fd727 100644 --- a/configs/T4240QDS_SDCARD_defconfig +++ b/configs/T4240QDS_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4240QDS_SECURE_BOOT_defconfig b/configs/T4240QDS_SECURE_BOOT_defconfig index 3524d0b159..367ca86384 100644 --- a/configs/T4240QDS_SECURE_BOOT_defconfig +++ b/configs/T4240QDS_SECURE_BOOT_defconfig @@ -10,9 +10,9 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig index ce1ad888da..9e98245fee 100644 --- a/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T4240QDS_SRIO_PCIE_BOOT_defconfig @@ -12,9 +12,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4240QDS_defconfig b/configs/T4240QDS_defconfig index db6dfc94ac..65401c3472 100644 --- a/configs/T4240QDS_defconfig +++ b/configs/T4240QDS_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index 1390ce8950..a8aa25cefe 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -19,9 +19,9 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index dad2001f32..ad56583b8b 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -9,9 +9,9 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/TQM834x_defconfig b/configs/TQM834x_defconfig index 9d4ea14afd..d755fa61d6 100644 --- a/configs/TQM834x_defconfig +++ b/configs/TQM834x_defconfig @@ -9,6 +9,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/TWR-P1025_defconfig b/configs/TWR-P1025_defconfig index e32a0600f4..c892bffef9 100644 --- a/configs/TWR-P1025_defconfig +++ b/configs/TWR-P1025_defconfig @@ -12,8 +12,9 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig index 68ef59a517..2fb2dc68f6 100644 --- a/configs/UCP1020_SPIFLASH_defconfig +++ b/configs/UCP1020_SPIFLASH_defconfig @@ -12,13 +12,14 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set +CONFIG_CMD_MMC_SPI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index 6999db3aa4..8ba5948f86 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -12,13 +12,14 @@ CONFIG_SYS_PROMPT="B$ " CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc>\" to stop\n" CONFIG_AUTOBOOT_STOP_STR="\x1b" +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y # CONFIG_CMD_NAND is not set +CONFIG_CMD_MMC_SPI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 2a2f26d38f..5ee19bca1a 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -19,8 +19,8 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_SCSI=y CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_SUN7I_GMAC=y +CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/alt_defconfig b/configs/alt_defconfig index a220003f77..34af5d2157 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index 180268ee69..cbe69f55e5 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -14,7 +14,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_FAT_SUPPORT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_NOWHERE=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y @@ -32,14 +31,14 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -52,8 +51,10 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig index 2c153a840b..ecf55d6da6 100644 --- a/configs/am335x_boneblack_defconfig +++ b/configs/am335x_boneblack_defconfig @@ -24,6 +24,7 @@ CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x81000000 CONFIG_FASTBOOT_BUF_SIZE=0x07000000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_DFU_TFTP=y @@ -34,6 +35,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index addfd09537..570c668a7f 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -27,6 +27,7 @@ CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x81000000 CONFIG_FASTBOOT_BUF_SIZE=0x07000000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y @@ -42,6 +43,7 @@ CONFIG_PHYLIB=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y CONFIG_USB=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index 82d5a97d6c..9f88a42cdc 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -6,7 +6,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am335x-evm" CONFIG_DISTRO_DEFAULTS=y CONFIG_SPL_LOAD_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_ARCH_MISC_INIT=y @@ -20,6 +19,8 @@ CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x81000000 CONFIG_FASTBOOT_BUF_SIZE=0x07000000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00080000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set @@ -34,12 +35,14 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y CONFIG_USB=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 3fb220a8bc..6cccf5e364 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -5,7 +5,6 @@ CONFIG_AM33XX=y CONFIG_NOR=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_ARCH_MISC_INIT=y @@ -19,6 +18,8 @@ CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x81000000 CONFIG_FASTBOOT_BUF_SIZE=0x07000000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00080000 CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MTDPARTS=y @@ -27,10 +28,12 @@ CONFIG_DFU_NAND=y CONFIG_DFU_RAM=y CONFIG_MMC_OMAP_HS=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 9f7247bcb4..2aa67b0f2e 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -28,6 +28,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index 607ac07196..2a55d35221 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -32,6 +32,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/am335x_evm_usbspl_defconfig b/configs/am335x_evm_usbspl_defconfig index 55c13da354..666b6323f0 100644 --- a/configs/am335x_evm_usbspl_defconfig +++ b/configs/am335x_evm_usbspl_defconfig @@ -5,7 +5,6 @@ CONFIG_AM33XX=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_ARCH_MISC_INIT=y @@ -22,6 +21,8 @@ CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x81000000 CONFIG_FASTBOOT_BUF_SIZE=0x07000000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00080000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set @@ -30,10 +31,12 @@ CONFIG_DFU_MMC=y CONFIG_DFU_NAND=y CONFIG_DFU_RAM=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig index 59306ba8c6..dabfcbb9ba 100644 --- a/configs/am335x_hs_evm_defconfig +++ b/configs/am335x_hs_evm_defconfig @@ -11,7 +11,6 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_IMAGE_POST_PROCESS=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_ARCH_MISC_INIT=y @@ -37,12 +36,14 @@ CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_TIMER=y CONFIG_OMAP_TIMER=y CONFIG_USB=y diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig index 2ecd1d95a0..e63fa1b3f6 100644 --- a/configs/am335x_igep003x_defconfig +++ b/configs/am335x_igep003x_defconfig @@ -29,14 +29,15 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -51,9 +52,11 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig index 9361824e07..dcf4189f5a 100644 --- a/configs/am335x_shc_defconfig +++ b/configs/am335x_shc_defconfig @@ -30,10 +30,10 @@ CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -41,6 +41,7 @@ CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig index 160e3690e7..9a7274d081 100644 --- a/configs/am335x_shc_ict_defconfig +++ b/configs/am335x_shc_ict_defconfig @@ -30,10 +30,10 @@ CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -41,6 +41,7 @@ CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig index 9eac46d13c..d40412571b 100644 --- a/configs/am335x_shc_netboot_defconfig +++ b/configs/am335x_shc_netboot_defconfig @@ -31,10 +31,10 @@ CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -42,6 +42,7 @@ CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_shc_prompt_defconfig b/configs/am335x_shc_prompt_defconfig index a6c6c57325..833eaaab75 100644 --- a/configs/am335x_shc_prompt_defconfig +++ b/configs/am335x_shc_prompt_defconfig @@ -28,10 +28,10 @@ CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -39,6 +39,7 @@ CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig index 2be46460fb..f5a4a9ca74 100644 --- a/configs/am335x_shc_sdboot_defconfig +++ b/configs/am335x_shc_sdboot_defconfig @@ -30,10 +30,10 @@ CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -41,6 +41,7 @@ CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_shc_sdboot_prompt_defconfig b/configs/am335x_shc_sdboot_prompt_defconfig index 2be46460fb..f5a4a9ca74 100644 --- a/configs/am335x_shc_sdboot_prompt_defconfig +++ b/configs/am335x_shc_sdboot_prompt_defconfig @@ -30,10 +30,10 @@ CONFIG_AUTOBOOT_DELAY_STR="shc" CONFIG_AUTOBOOT_STOP_STR="noautoboot" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -41,6 +41,7 @@ CONFIG_ISO_PARTITION=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig index 41dd2da374..5013720e6c 100644 --- a/configs/am335x_sl50_defconfig +++ b/configs/am335x_sl50_defconfig @@ -29,19 +29,21 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_MMC_OMAP_HS=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_OF_LIBFDT=y diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig index 396aadddf4..4ddde09395 100644 --- a/configs/am3517_crane_defconfig +++ b/configs/am3517_crane_defconfig @@ -13,11 +13,11 @@ CONFIG_SYS_PROMPT="AM3517_CRANE # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index 1d07f1b2f1..e37d8cff34 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -4,7 +4,6 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 # CONFIG_SPL_GPIO_SUPPORT is not set CONFIG_TARGET_AM3517_EVM=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 CONFIG_VERSION_VARIABLE=y @@ -18,13 +17,13 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -37,6 +36,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_UBI=y CONFIG_SPL_PARTITION_UUIDS=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 10a9b9e7e3..15c25d39f1 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -6,7 +6,7 @@ CONFIG_AM43XX=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_SPL_LOAD_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,NAND" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y @@ -15,6 +15,9 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x40000 # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set @@ -30,6 +33,7 @@ CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHYLIB=y diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig index cb6a0d35fc..fc3e1b72c3 100644 --- a/configs/am43xx_evm_ethboot_defconfig +++ b/configs/am43xx_evm_ethboot_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_AM43XX=y -CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_ENV_IS_IN_FAT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y @@ -15,19 +15,22 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x40000 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -43,6 +46,7 @@ CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHYLIB=y diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 0130e6bc11..5a8d6844e5 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -14,16 +14,16 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index b25a3ee0a5..6cdbc8d199 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -6,7 +6,7 @@ CONFIG_ISW_ENTRY_ADDR=0x40300350 CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_SPL_LOAD_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_ENV_IS_IN_FAT=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y @@ -19,19 +19,22 @@ CONFIG_SPL_USB_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x40000 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -53,6 +56,7 @@ CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHYLIB=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 0a6a9cd512..a4d23e10b6 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -14,7 +14,7 @@ CONFIG_FIT_IMAGE_POST_PROCESS=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,NAND" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y @@ -44,6 +44,7 @@ CONFIG_DFU_SF=y CONFIG_DM_GPIO=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_PHYLIB=y diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index d5ea25e933..11be1ad27f 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -33,6 +33,7 @@ CONFIG_FASTBOOT_USB_DEV=1 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=1 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_PMIC is not set diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig index 03bac80338..a6ad0d36e0 100644 --- a/configs/am57xx_evm_nodt_defconfig +++ b/configs/am57xx_evm_nodt_defconfig @@ -24,16 +24,17 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=1 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig index afe6c96fd1..d76cb65da9 100644 --- a/configs/ap121_defconfig +++ b/configs/ap121_defconfig @@ -5,6 +5,8 @@ CONFIG_DEFAULT_DEVICE_TREE="ap121" CONFIG_DEBUG_UART=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="ap121 # " @@ -18,9 +20,9 @@ CONFIG_SYS_PROMPT="ap121 # " # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_MTDPARTS=y diff --git a/configs/ap143_defconfig b/configs/ap143_defconfig index ca77e7902d..ba62fb4c29 100644 --- a/configs/ap143_defconfig +++ b/configs/ap143_defconfig @@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="ap143" CONFIG_DEBUG_UART=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="ap143 # " @@ -19,9 +21,9 @@ CONFIG_SYS_PROMPT="ap143 # " # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_MTDPARTS=y diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig index 8c1aaf2c3c..52f806b0cf 100644 --- a/configs/ap325rxa_defconfig +++ b/configs/ap325rxa_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_AP325RXA=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC2,38400" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,8 +14,9 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_IDE=y +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig index 48c52ad448..6f4651ce09 100644 --- a/configs/ap_sh4a_4a_defconfig +++ b/configs/ap_sh4a_4a_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_AP_SH4A_4A=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC4,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,9 +14,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index ccff112392..c93a0f7d85 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -13,14 +13,15 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SYS_PROMPT="Apalis TK1 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_DM=y diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 38161d46a8..468a1fcac7 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -27,13 +27,13 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/apalis_imx6_nospl_com_defconfig b/configs/apalis_imx6_nospl_com_defconfig index 1a55c1aad4..ff234e5dc1 100644 --- a/configs/apalis_imx6_nospl_com_defconfig +++ b/configs/apalis_imx6_nospl_com_defconfig @@ -20,13 +20,13 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/apalis_imx6_nospl_it_defconfig b/configs/apalis_imx6_nospl_it_defconfig index b02dfc7006..7de63088ce 100644 --- a/configs/apalis_imx6_nospl_it_defconfig +++ b/configs/apalis_imx6_nospl_it_defconfig @@ -20,13 +20,13 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index aaf1bfb7f0..e8e5e3536e 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -11,14 +11,15 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SYS_PROMPT="Apalis T30 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/apf27_defconfig b/configs/apf27_defconfig index 549556d3f9..7d453b6196 100644 --- a/configs/apf27_defconfig +++ b/configs/apf27_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_IDENT_STRING=" apf27 patch 3.10" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySMX0,115200 mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),512K(firmware),512K(dtb),5M(kernel),-(rootfs) ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs " CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="BIOS> " CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_NAND_LOCK_UNLOCK=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index 347ab4b54c..7971b1068d 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -14,13 +14,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/aristainetos2b_defconfig b/configs/aristainetos2b_defconfig index aea2d8e938..1cd3502d67 100644 --- a/configs/aristainetos2b_defconfig +++ b/configs/aristainetos2b_defconfig @@ -14,13 +14,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig index c069d0fb96..fbe8269aa9 100644 --- a/configs/aristainetos_defconfig +++ b/configs/aristainetos_defconfig @@ -14,13 +14,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/armadillo-800eva_defconfig b/configs/armadillo-800eva_defconfig index cb5e150b9b..6abcb706de 100644 --- a/configs/armadillo-800eva_defconfig +++ b/configs/armadillo-800eva_defconfig @@ -15,9 +15,10 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 66ffefd058..6ddf351231 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -13,10 +13,10 @@ CONFIG_CONSOLE_MUX=y CONFIG_SPL=y CONFIG_SYS_PROMPT="ARNDALE # " # CONFIG_CMD_IMLS is not set -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index add26efc83..f76df63d17 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -1,11 +1,13 @@ CONFIG_M68K=y CONFIG_TARGET_ASTRO_MCF5373L=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS=" console=ttyS2,115200 rootfstype=romfs loaderversion=$loaderversion" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="URMEL > " -CONFIG_CMD_I2C=y CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/at91rm9200ek_defconfig b/configs/at91rm9200ek_defconfig index b239fd950e..e7883ab514 100644 --- a/configs/at91rm9200ek_defconfig +++ b/configs/at91rm9200ek_defconfig @@ -10,8 +10,8 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/at91rm9200ek_ram_defconfig b/configs/at91rm9200ek_ram_defconfig index 1bb20036f5..64b722d9c7 100644 --- a/configs/at91rm9200ek_ram_defconfig +++ b/configs/at91rm9200ek_ram_defconfig @@ -11,8 +11,8 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/at91sam9260ek_dataflash_cs0_defconfig b/configs/at91sam9260ek_dataflash_cs0_defconfig index b356443c0e..8661d9f098 100644 --- a/configs/at91sam9260ek_dataflash_cs0_defconfig +++ b/configs/at91sam9260ek_dataflash_cs0_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9260ek_dataflash_cs1_defconfig b/configs/at91sam9260ek_dataflash_cs1_defconfig index 98bcdadf18..4c0595d7a2 100644 --- a/configs/at91sam9260ek_dataflash_cs1_defconfig +++ b/configs/at91sam9260ek_dataflash_cs1_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig index 312d820d78..d8c981983e 100644 --- a/configs/at91sam9260ek_nandflash_defconfig +++ b/configs/at91sam9260ek_nandflash_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index 466da508d8..b87255fa38 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index dbe953ff02..be221a6cd1 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index 1b441d65d3..78faadfd8a 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9263ek_dataflash_cs0_defconfig b/configs/at91sam9263ek_dataflash_cs0_defconfig index 09157955e0..a4a65c9b80 100644 --- a/configs/at91sam9263ek_dataflash_cs0_defconfig +++ b/configs/at91sam9263ek_dataflash_cs0_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9263ek_dataflash_defconfig b/configs/at91sam9263ek_dataflash_defconfig index 09157955e0..a4a65c9b80 100644 --- a/configs/at91sam9263ek_dataflash_defconfig +++ b/configs/at91sam9263ek_dataflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index abe14b36f7..13ba9de56f 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig index 94796019cd..f08e7ae9a4 100644 --- a/configs/at91sam9263ek_norflash_boot_defconfig +++ b/configs/at91sam9263ek_norflash_boot_defconfig @@ -16,12 +16,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig index 3a94c6301d..52811596b4 100644 --- a/configs/at91sam9263ek_norflash_defconfig +++ b/configs/at91sam9263ek_norflash_defconfig @@ -16,12 +16,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig index ac3982c90d..8854b55bf2 100644 --- a/configs/at91sam9g10ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g10ek_dataflash_cs3_defconfig b/configs/at91sam9g10ek_dataflash_cs3_defconfig index 986f7e0078..23d6c89955 100644 --- a/configs/at91sam9g10ek_dataflash_cs3_defconfig +++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig index 4e34d69322..127c7b7a27 100644 --- a/configs/at91sam9g10ek_nandflash_defconfig +++ b/configs/at91sam9g10ek_nandflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig index 2313710e12..bac13a3fbc 100644 --- a/configs/at91sam9g20ek_2mmc_defconfig +++ b/configs/at91sam9g20ek_2mmc_defconfig @@ -7,18 +7,20 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC" CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig index c0094855c0..c1d52149e7 100644 --- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig +++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig @@ -7,18 +7,20 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g20ek_dataflash_cs0_defconfig b/configs/at91sam9g20ek_dataflash_cs0_defconfig index da86e8ce38..8a7d8777d2 100644 --- a/configs/at91sam9g20ek_dataflash_cs0_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs0_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g20ek_dataflash_cs1_defconfig b/configs/at91sam9g20ek_dataflash_cs1_defconfig index 7a46152acd..170242b24b 100644 --- a/configs/at91sam9g20ek_dataflash_cs1_defconfig +++ b/configs/at91sam9g20ek_dataflash_cs1_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig index 04cd2b2a20..8715728845 100644 --- a/configs/at91sam9g20ek_nandflash_defconfig +++ b/configs/at91sam9g20ek_nandflash_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index 3ed88043a3..e51a827395 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig index 1eba506897..9c36b6b18a 100644 --- a/configs/at91sam9m10g45ek_nandflash_defconfig +++ b/configs/at91sam9m10g45ek_nandflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index 8b00ec6e1a..1e5d78f46c 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index a481d7c017..9f7a3aa062 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index 375540b710..9fa6894eb2 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig index fecddb153d..9eec6e8980 100644 --- a/configs/at91sam9rlek_dataflash_defconfig +++ b/configs/at91sam9rlek_dataflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,11 +18,11 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index 29ede1c710..af7643d4c0 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,11 +18,11 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig index 0898560101..7a756f6713 100644 --- a/configs/at91sam9rlek_nandflash_defconfig +++ b/configs/at91sam9rlek_nandflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,11 +18,11 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index 40cb0fe508..2e940398f8 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_DATAFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index 627d17f5fd..98612dd56a 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index 2cfc00af7e..6a007fd3e9 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 352b00f6c4..9f09997f0c 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -7,6 +7,8 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,12 +18,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/at91sam9xeek_dataflash_cs0_defconfig b/configs/at91sam9xeek_dataflash_cs0_defconfig index 0afd2459c9..c69d27f1c8 100644 --- a/configs/at91sam9xeek_dataflash_cs0_defconfig +++ b/configs/at91sam9xeek_dataflash_cs0_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9xeek_dataflash_cs1_defconfig b/configs/at91sam9xeek_dataflash_cs1_defconfig index e000b25e25..cf734a5063 100644 --- a/configs/at91sam9xeek_dataflash_cs1_defconfig +++ b/configs/at91sam9xeek_dataflash_cs1_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig index 4ef55ead76..226e54f9f9 100644 --- a/configs/at91sam9xeek_nandflash_defconfig +++ b/configs/at91sam9xeek_nandflash_defconfig @@ -7,17 +7,19 @@ CONFIG_DEBUG_UART=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/axm_defconfig b/configs/axm_defconfig index b99ddb9bed..8ecd26807b 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -15,6 +15,8 @@ CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="\0addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}::off\0addtest=setenv bootargs ${bootargs} loglevel=4 test\0baudrate=115200\0boot_file=setenv bootfile /${project_dir}/kernel/uImage\0boot_retries=0\0bootcmd=run flash_self\0bootdelay=3\0ethact=macb0\0flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0flash_self=run nand_kernel;run setbootargs;upgrade_available;bootm ${kernel_ram};reset\0flash_self_test=run nand_kernel;run setbootargs addtest; upgrade_available;bootm ${kernel_ram};reset\0hostname=systemone\0kernel_Off=0x00200000\0kernel_Off_fallback=0x03800000\0kernel_ram=0x21500000\0kernel_size=0x00400000\0kernel_size_fallback=0x00400000\0loads_echo=1\0nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} ${kernel_size}\0net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};run nfsargs;run addip;upgrade_available;bootm ${kernel_ram};reset\0netdev=eth0\0nfsargs=run root_path;setenv bootargs ${bootargs} root=/dev/nfs rw nfsroot=${serverip}:${rootpath} at91sam9_wdt.wdt_timeout=16\0partitionset_active=A\0preboot=echo;echo Type 'run flash_self' to use kernel and root filesystem on memory;echo Type 'run flash_nfs' to use kernel from memory and root filesystem over NFS;echo Type 'run net_nfs' to get Kernel over TFTP and mount root filesystem over NFS;echo\0project_dir=systemone\0root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0rootfs=/dev/mtdblock5\0rootfs_fallback=/dev/mtdblock7\0setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops root=${rootfs} rootfstype=jffs2 panic=7 at91sam9_wdt.wdt_timeout=16\0stderr=serial\0stdin=serial\0stdout=serial\0upgrade_available=0\0" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y @@ -23,11 +25,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/axs101_defconfig b/configs/axs101_defconfig index 8d36371103..edaa99205e 100644 --- a/configs/axs101_defconfig +++ b/configs/axs101_defconfig @@ -7,6 +7,8 @@ CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS3,115200n8" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="AXS# " # CONFIG_CMD_IMLS is not set diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig index 2ad37eeae1..0fda716200 100644 --- a/configs/axs103_defconfig +++ b/configs/axs103_defconfig @@ -7,6 +7,8 @@ CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS3,115200n8" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="AXS# " # CONFIG_CMD_IMLS is not set diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index f12503a334..b17113f6b3 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -13,17 +13,20 @@ CONFIG_SEABIOS=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/bcm11130_defconfig b/configs/bcm11130_defconfig index 30c8670a46..60f809ed74 100644 --- a/configs/bcm11130_defconfig +++ b/configs/bcm11130_defconfig @@ -11,9 +11,9 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/bcm11130_nand_defconfig b/configs/bcm11130_nand_defconfig index 5ee6682844..72235e630e 100644 --- a/configs/bcm11130_nand_defconfig +++ b/configs/bcm11130_nand_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_TARGET_BCM28155_AP=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_MMC=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set @@ -11,9 +10,9 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set @@ -24,6 +23,7 @@ CONFIG_EFI_PARTITION=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_KONA=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_GADGET=y diff --git a/configs/bcm23550_w1d_defconfig b/configs/bcm23550_w1d_defconfig index 321a350a0e..100568412e 100644 --- a/configs/bcm23550_w1d_defconfig +++ b/configs/bcm23550_w1d_defconfig @@ -17,9 +17,9 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/bcm28155_ap_defconfig b/configs/bcm28155_ap_defconfig index fcf76bd4e3..ff2efbc1cc 100644 --- a/configs/bcm28155_ap_defconfig +++ b/configs/bcm28155_ap_defconfig @@ -18,9 +18,9 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/bcm28155_w1d_defconfig b/configs/bcm28155_w1d_defconfig index 2dc7d19082..6aaed9b687 100644 --- a/configs/bcm28155_w1d_defconfig +++ b/configs/bcm28155_w1d_defconfig @@ -11,9 +11,9 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y @@ -23,6 +23,9 @@ CONFIG_EFI_PARTITION=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_KONA=y +CONFIG_NETDEVICES=y +CONFIG_BCM_SF2_ETH=y +CONFIG_BCM_SF2_ETH_GMAC=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_GADGET=y @@ -32,6 +35,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Broadcom Corporation" CONFIG_G_DNL_VENDOR_NUM=0x18d1 CONFIG_G_DNL_PRODUCT_NUM=0x0d02 -CONFIG_NETDEVICES=y -CONFIG_BCM_SF2_ETH=y -CONFIG_BCM_SF2_ETH_GMAC=y diff --git a/configs/bcm911360_entphn-ns_defconfig b/configs/bcm911360_entphn-ns_defconfig index 8f76b09e48..a32472b020 100644 --- a/configs/bcm911360_entphn-ns_defconfig +++ b/configs/bcm911360_entphn-ns_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set -CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_SHA1=y CONFIG_SHA256=y diff --git a/configs/bcm911360_entphn_defconfig b/configs/bcm911360_entphn_defconfig index d450fba041..c90c0c7f9c 100644 --- a/configs/bcm911360_entphn_defconfig +++ b/configs/bcm911360_entphn_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set -CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_SHA1=y CONFIG_SHA256=y diff --git a/configs/bcm911360k_defconfig b/configs/bcm911360k_defconfig index f77f50ce4f..0ceb8eaf38 100644 --- a/configs/bcm911360k_defconfig +++ b/configs/bcm911360k_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set -CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_SHA1=y CONFIG_SHA256=y diff --git a/configs/bcm958300k-ns_defconfig b/configs/bcm958300k-ns_defconfig index 54f3acbf6e..ac50b2e36a 100644 --- a/configs/bcm958300k-ns_defconfig +++ b/configs/bcm958300k-ns_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set -CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_SHA1=y CONFIG_SHA256=y diff --git a/configs/bcm958300k_defconfig b/configs/bcm958300k_defconfig index f77f50ce4f..0ceb8eaf38 100644 --- a/configs/bcm958300k_defconfig +++ b/configs/bcm958300k_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set -CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_SHA1=y CONFIG_SHA256=y diff --git a/configs/bcm958305k_defconfig b/configs/bcm958305k_defconfig index f77f50ce4f..0ceb8eaf38 100644 --- a/configs/bcm958305k_defconfig +++ b/configs/bcm958305k_defconfig @@ -18,7 +18,6 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_FAT=y # CONFIG_MMC is not set -CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_SHA1=y CONFIG_SHA256=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 10fd50d925..a61fd628ca 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -9,16 +9,17 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/bg0900_defconfig b/configs/bg0900_defconfig index ddd1b4c25c..1adc675e04 100644 --- a/configs/bg0900_defconfig +++ b/configs/bg0900_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y @@ -15,11 +17,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/birdland_bav335a_defconfig b/configs/birdland_bav335a_defconfig index 756f05f037..1d575a1452 100644 --- a/configs/birdland_bav335a_defconfig +++ b/configs/birdland_bav335a_defconfig @@ -26,19 +26,20 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -56,6 +57,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/birdland_bav335b_defconfig b/configs/birdland_bav335b_defconfig index 6f30ac50a7..786848ea9b 100644 --- a/configs/birdland_bav335b_defconfig +++ b/configs/birdland_bav335b_defconfig @@ -26,19 +26,20 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -56,6 +57,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig index 63b9514f92..008a100337 100644 --- a/configs/bk4r1_defconfig +++ b/configs/bk4r1_defconfig @@ -12,11 +12,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/blanche_defconfig b/configs/blanche_defconfig index c2a4c8092f..a4f02fe882 100644 --- a/configs/blanche_defconfig +++ b/configs/blanche_defconfig @@ -9,6 +9,7 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/boston32r2_defconfig b/configs/boston32r2_defconfig index 6d93edc358..48983f59a1 100644 --- a/configs/boston32r2_defconfig +++ b/configs/boston32r2_defconfig @@ -14,9 +14,10 @@ CONFIG_SYS_PROMPT="boston # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y CONFIG_CMD_LINK_LOCAL=y @@ -37,3 +38,4 @@ CONFIG_DM_PCI=y CONFIG_PCI_XILINX=y CONFIG_SYS_NS16550=y CONFIG_LZ4=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/boston32r2el_defconfig b/configs/boston32r2el_defconfig index 9e494eee10..0e1cf29b43 100644 --- a/configs/boston32r2el_defconfig +++ b/configs/boston32r2el_defconfig @@ -15,9 +15,10 @@ CONFIG_SYS_PROMPT="boston # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y CONFIG_CMD_LINK_LOCAL=y @@ -38,3 +39,4 @@ CONFIG_DM_PCI=y CONFIG_PCI_XILINX=y CONFIG_SYS_NS16550=y CONFIG_LZ4=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/boston64r2_defconfig b/configs/boston64r2_defconfig index 6913d2ba62..5010a0e104 100644 --- a/configs/boston64r2_defconfig +++ b/configs/boston64r2_defconfig @@ -15,9 +15,10 @@ CONFIG_SYS_PROMPT="boston # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y CONFIG_CMD_LINK_LOCAL=y @@ -38,3 +39,4 @@ CONFIG_DM_PCI=y CONFIG_PCI_XILINX=y CONFIG_SYS_NS16550=y CONFIG_LZ4=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/boston64r2el_defconfig b/configs/boston64r2el_defconfig index 10ccc5427c..ae090bf4aa 100644 --- a/configs/boston64r2el_defconfig +++ b/configs/boston64r2el_defconfig @@ -16,9 +16,10 @@ CONFIG_SYS_PROMPT="boston # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y CONFIG_CMD_SNTP=y CONFIG_CMD_DNS=y CONFIG_CMD_LINK_LOCAL=y @@ -39,3 +40,4 @@ CONFIG_DM_PCI=y CONFIG_PCI_XILINX=y CONFIG_SYS_NS16550=y CONFIG_LZ4=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index d0129fbaa1..dc2985a464 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -31,14 +31,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig index c39d27da06..c9d0b2db6f 100644 --- a/configs/brppt1_nand_defconfig +++ b/configs/brppt1_nand_defconfig @@ -9,7 +9,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=-2 # CONFIG_CONSOLE_MUX is not set @@ -31,14 +31,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -52,6 +52,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_MTDPARTS=y CONFIG_NETCONSOLE=y # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig index 2227830802..b84487584c 100644 --- a/configs/brppt1_spi_defconfig +++ b/configs/brppt1_spi_defconfig @@ -34,16 +34,16 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -62,6 +62,7 @@ CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_STORAGE=y diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig index f46695ad9b..d45aa88cbc 100644 --- a/configs/brxre1_defconfig +++ b/configs/brxre1_defconfig @@ -33,14 +33,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_UNZIP=y +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/caddy2_defconfig b/configs/caddy2_defconfig index b062dcdd58..3bdcb8d776 100644 --- a/configs/caddy2_defconfig +++ b/configs/caddy2_defconfig @@ -8,6 +8,8 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_TSI148=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/cairo_defconfig b/configs/cairo_defconfig index 6996440b23..4eb6ceffd0 100644 --- a/configs/cairo_defconfig +++ b/configs/cairo_defconfig @@ -14,16 +14,18 @@ CONFIG_SYS_PROMPT="Cairo # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x240000 CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -37,6 +39,8 @@ CONFIG_CMD_MTDPARTS=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index f771a057a3..8a9d386d12 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -10,13 +10,14 @@ CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index 5623bbfbc6..08cc1d0c56 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -9,16 +9,17 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/cgtqmx6eval_defconfig b/configs/cgtqmx6eval_defconfig index de61dd33a6..c8a77976dc 100644 --- a/configs/cgtqmx6eval_defconfig +++ b/configs/cgtqmx6eval_defconfig @@ -26,15 +26,15 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_SATA=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig index 5257d7000e..89c5e2c64e 100644 --- a/configs/chiliboard_defconfig +++ b/configs/chiliboard_defconfig @@ -23,11 +23,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -40,8 +40,10 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_MTDPARTS=y CONFIG_DM_GPIO=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_STORAGE=y diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig index 01032e7330..4b335ab023 100644 --- a/configs/chromebit_mickey_defconfig +++ b/configs/chromebit_mickey_defconfig @@ -14,12 +14,13 @@ CONFIG_ENV_IS_NOWHERE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y +CONFIG_CMD_SF_TEST=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index b9d4fc9c12..019e077344 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -16,12 +16,13 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y +CONFIG_CMD_SF_TEST=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index 3655a6449b..f058e560ef 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -18,6 +18,8 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CPU_SUPPORT=y @@ -27,16 +29,16 @@ CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_PCI_SUPPORT=y CONFIG_SPL_PCH_SUPPORT=y CONFIG_SPL_RTC_SUPPORT=y -CONFIG_SPL_TIMER_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -65,6 +67,7 @@ CONFIG_DEBUG_UART_BASE=0x3f8 CONFIG_DEBUG_UART_CLOCK=1843200 CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_SYS_NS16550=y +CONFIG_SPL_TIMER=y CONFIG_TPM_TIS_LPC=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index e2bc9f7945..7fcddba50c 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -10,16 +10,19 @@ CONFIG_HAVE_VGA_BIOS=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig index fb955e46c6..a5e6240a67 100644 --- a/configs/chromebook_minnie_defconfig +++ b/configs/chromebook_minnie_defconfig @@ -15,12 +15,13 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y +CONFIG_CMD_SF_TEST=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig index 0a2cbb8ad2..2c294bd8e1 100644 --- a/configs/chromebook_samus_defconfig +++ b/configs/chromebook_samus_defconfig @@ -10,16 +10,19 @@ CONFIG_SMP=y CONFIG_HAVE_VGA_BIOS=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index 34f57ad1eb..a81a9cce82 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -7,15 +7,18 @@ CONFIG_HAVE_VGA_BIOS=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig index 415bc382cb..c2f6be5935 100644 --- a/configs/cl-som-am57x_defconfig +++ b/configs/cl-som-am57x_defconfig @@ -16,14 +16,14 @@ CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -34,6 +34,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y +CONFIG_CMD_PCA953X=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS_GPIO=y CONFIG_LED_STATUS0=y diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 5f1c5ae875..b582c88229 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -19,10 +19,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 0facb9bd29..bbe82a678d 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -27,17 +27,17 @@ CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_SATA=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index a88b2d81d5..e9bd6b75ef 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -28,11 +28,11 @@ CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -45,6 +45,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_MTDPARTS=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y +CONFIG_CMD_PCA953X=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS_GPIO=y CONFIG_LED_STATUS0=y @@ -52,6 +53,7 @@ CONFIG_LED_STATUS_BIT=64 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_FAT_WRITE=y diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig index d5550feda8..69d1cc5d1a 100644 --- a/configs/cm_t3517_defconfig +++ b/configs/cm_t3517_defconfig @@ -15,12 +15,12 @@ CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v1, v2, v3" # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -38,6 +38,7 @@ CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_STORAGE=y diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig index 16f1eab927..4c7e2b54a7 100644 --- a/configs/cm_t35_defconfig +++ b/configs/cm_t35_defconfig @@ -17,12 +17,12 @@ CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v1, v2, v3" # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -40,6 +40,7 @@ CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 19d10b71db..749c5e0b3c 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -30,16 +30,16 @@ CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y @@ -54,6 +54,7 @@ CONFIG_ISO_PARTITION=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_ATMEL=y @@ -67,6 +68,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig index ff811be04b..956f3581d7 100644 --- a/configs/cm_t54_defconfig +++ b/configs/cm_t54_defconfig @@ -21,12 +21,12 @@ CONFIG_CMD_EEPROM=y CONFIG_CMD_EEPROM_LAYOUT=y CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -39,9 +39,10 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y -CONFIG_SCSI=y CONFIG_MMC_OMAP_HS=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index 21e9f177f5..edbd87fe19 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -27,13 +27,13 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/colibri_imx6_nospl_defconfig b/configs/colibri_imx6_nospl_defconfig index e6d624a284..96472ce3e1 100644 --- a/configs/colibri_imx6_nospl_defconfig +++ b/configs/colibri_imx6_nospl_defconfig @@ -20,13 +20,13 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y -CONFIG_CMD_USB_MASS_STORAGE=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 8f069b7c2c..ef433b0b67 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -21,16 +21,16 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_NAND_TORTURE=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig index 040408bcda..41c2d2ba20 100644 --- a/configs/colibri_pxa270_defconfig +++ b/configs/colibri_pxa270_defconfig @@ -1,17 +1,19 @@ CONFIG_ARM=y CONFIG_TARGET_COLIBRI_PXA270=y CONFIG_ENV_IS_IN_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 50f6d56756..7f416b08be 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -11,15 +11,15 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SYS_PROMPT="Colibri T20 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index 4c5a248eaa..90255b7520 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -11,14 +11,14 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SYS_PROMPT="Colibri T30 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 810a7e38c9..8f02d067f9 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -17,13 +17,13 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_FUSE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/comtrend_ar5387un_ram_defconfig b/configs/comtrend_ar5387un_ram_defconfig index f856752663..52e9d6c797 100644 --- a/configs/comtrend_ar5387un_ram_defconfig +++ b/configs/comtrend_ar5387un_ram_defconfig @@ -24,9 +24,9 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/comtrend_ct5361_ram_defconfig b/configs/comtrend_ct5361_ram_defconfig index 27fcc8ea3c..3a1aea9eb8 100644 --- a/configs/comtrend_ct5361_ram_defconfig +++ b/configs/comtrend_ct5361_ram_defconfig @@ -24,8 +24,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/comtrend_vr3032u_ram_defconfig b/configs/comtrend_vr3032u_ram_defconfig index 97f1c6259e..1326f7e2b4 100644 --- a/configs/comtrend_vr3032u_ram_defconfig +++ b/configs/comtrend_vr3032u_ram_defconfig @@ -24,9 +24,9 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index ff058f98c6..89ba0b6b9c 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -14,18 +14,21 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sda2 ro quiet" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig index 5903edb363..0edacb81be 100644 --- a/configs/conga-qeval20-qa3-e3845_defconfig +++ b/configs/conga-qeval20-qa3-e3845_defconfig @@ -14,18 +14,21 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sda2 ro quiet" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig index d933179f1d..fed0e1e8c5 100644 --- a/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig @@ -16,14 +16,16 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_SATA=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y diff --git a/configs/controlcenterd_36BIT_SDCARD_defconfig b/configs/controlcenterd_36BIT_SDCARD_defconfig index c290e09b62..8524c8eece 100644 --- a/configs/controlcenterd_36BIT_SDCARD_defconfig +++ b/configs/controlcenterd_36BIT_SDCARD_defconfig @@ -16,14 +16,16 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_SATA=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index a36ff30e3b..fe74727e4e 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -20,10 +20,11 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_GO is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -35,7 +36,6 @@ CONFIG_CMD_EXT4=y CONFIG_EFI_PARTITION=y CONFIG_OF_BOARD_FIXUP=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SCSI=y CONFIG_DM_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y @@ -48,6 +48,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_GIGE=y +CONFIG_SCSI=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_DEBUG_UART_SHIFT=2 diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index a1379724ec..badfbfbbbb 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -4,12 +4,15 @@ CONFIG_TARGET_COREBOOT=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index cd0f99396d..ecfd70b38d 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -13,6 +13,8 @@ CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y @@ -22,12 +24,12 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index d347c0ae18..f7eca76bfe 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -3,15 +3,18 @@ CONFIG_VENDOR_INTEL=y CONFIG_DEFAULT_DEVICE_TREE="cougarcanyon2" CONFIG_TARGET_COUGARCANYON2=y # CONFIG_ENABLE_MRC_CACHE is not set +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index a17aa75e8f..93f96b03be 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -8,17 +8,20 @@ CONFIG_HAVE_VGA_BIOS=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_FIT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/d2net_v2_defconfig b/configs/d2net_v2_defconfig index 0b3769e8d1..78679b0ff9 100644 --- a/configs/d2net_v2_defconfig +++ b/configs/d2net_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" D2 v2" CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="d2v2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/da850_am18xxevm_defconfig b/configs/da850_am18xxevm_defconfig index e3320e6641..7e056e891d 100644 --- a/configs/da850_am18xxevm_defconfig +++ b/configs/da850_am18xxevm_defconfig @@ -9,6 +9,8 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index a49ef71e2d..0135e7d2f3 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -9,6 +9,8 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 0a5c636c50..5c6ae25622 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -4,6 +4,8 @@ CONFIG_TARGET_DA850EVM=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index cafb34d8e8..57806a5768 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -10,16 +10,16 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/db-88f6720_defconfig b/configs/db-88f6720_defconfig index ab64826d3a..aa6e593975 100644 --- a/configs/db-88f6720_defconfig +++ b/configs/db-88f6720_defconfig @@ -18,10 +18,9 @@ CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -# CONFIG_CMD_NAND is not set +CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y @@ -39,7 +38,6 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_MISC=y # CONFIG_MMC is not set -CONFIG_NAND_PXA3XX=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig index 2d2acd40ce..81fac43a35 100644 --- a/configs/db-88f6820-amc_defconfig +++ b/configs/db-88f6820-amc_defconfig @@ -18,9 +18,10 @@ CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y @@ -40,6 +41,7 @@ CONFIG_SPL_OF_TRANSLATE=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_NAND_PXA3XX=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig index dc73e299f1..3cee2219ad 100644 --- a/configs/db-88f6820-gp_defconfig +++ b/configs/db-88f6820-gp_defconfig @@ -18,10 +18,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y @@ -38,7 +39,6 @@ CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_SPL_OF_TRANSLATE=y -CONFIG_SCSI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y @@ -48,6 +48,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_GIGE=y CONFIG_PCI=y +CONFIG_SCSI=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 CONFIG_DEBUG_UART_SHIFT=2 diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig index bcd5e7765c..9458f8c438 100644 --- a/configs/db-mv784mp-gp_defconfig +++ b/configs/db-mv784mp-gp_defconfig @@ -17,11 +17,12 @@ CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_SATA=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y @@ -38,6 +39,7 @@ CONFIG_EFI_PARTITION=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_SPL_OF_TRANSLATE=y # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_NAND_PXA3XX=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/dbau1000_defconfig b/configs/dbau1000_defconfig index 0a6f23324a..b24abecd73 100644 --- a/configs/dbau1000_defconfig +++ b/configs/dbau1000_defconfig @@ -7,11 +7,11 @@ CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_MAC_PARTITION=y diff --git a/configs/dbau1100_defconfig b/configs/dbau1100_defconfig index 1b7110877f..bdab8b1a5b 100644 --- a/configs/dbau1100_defconfig +++ b/configs/dbau1100_defconfig @@ -7,11 +7,11 @@ CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_MAC_PARTITION=y diff --git a/configs/dbau1500_defconfig b/configs/dbau1500_defconfig index 7ffe04ece6..f7abed9bf8 100644 --- a/configs/dbau1500_defconfig +++ b/configs/dbau1500_defconfig @@ -7,11 +7,11 @@ CONFIG_SYS_PROMPT="DbAu1xx0 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_MAC_PARTITION=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 09fcdefee5..41f473e3a4 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -6,18 +6,20 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 9afc2cea5a..c644b490a8 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -10,13 +10,16 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x680000 +CONFIG_CMD_SPL_WRITE_SIZE=0x400 # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -28,5 +31,6 @@ CONFIG_CMD_MTDPARTS=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig index bcc830a3b7..6dcc2fe7c6 100644 --- a/configs/dfi-bt700-q7x-151_defconfig +++ b/configs/dfi-bt700-q7x-151_defconfig @@ -13,17 +13,20 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sda1 ro quiet" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig index 1069177a71..e3886d9aa0 100644 --- a/configs/dms-ba16-1g_defconfig +++ b/configs/dms-ba16-1g_defconfig @@ -15,12 +15,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig index e5efb218c3..a0a0f6335f 100644 --- a/configs/dms-ba16_defconfig +++ b/configs/dms-ba16_defconfig @@ -14,12 +14,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 2760a825f9..151c2bc377 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -8,8 +8,8 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 0c4452a1d1..4fff0cf734 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -32,6 +32,7 @@ CONFIG_FASTBOOT_BUF_SIZE=0x2f000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=1 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_SETEXPR is not set CONFIG_ISO_PARTITION=y @@ -46,7 +47,6 @@ CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y -CONFIG_DM_SCSI=y CONFIG_DWC_AHCI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y @@ -72,6 +72,7 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_REGULATOR_PALMAS=y CONFIG_DM_REGULATOR_LP873X=y +CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 75b77fa947..5572472d01 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -49,7 +49,6 @@ CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_SYSCON=y -CONFIG_DM_SCSI=y CONFIG_DWC_AHCI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y @@ -75,6 +74,7 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_REGULATOR_PALMAS=y CONFIG_DM_REGULATOR_LP873X=y +CONFIG_DM_SCSI=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 59ea33134e..44d7ab8b0f 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -32,14 +32,14 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -53,12 +53,14 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig index c78b4a6fd5..b0b2eb52d8 100644 --- a/configs/dragonboard410c_defconfig +++ b/configs/dragonboard410c_defconfig @@ -4,6 +4,8 @@ CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C" CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c" CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyMSM0,115200n8" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="dragonboard410c => " @@ -12,10 +14,10 @@ CONFIG_SYS_PROMPT="dragonboard410c => " CONFIG_CMD_MD5SUM=y CONFIG_CMD_MEMINFO=y CONFIG_CMD_UNZIP=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y CONFIG_CLK=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 640096b7f5..4c01736d34 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -7,8 +7,8 @@ CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index d8c7ebe5c1..ab8db8ff1d 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -4,10 +4,10 @@ CONFIG_TARGET_DS109=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig index 6bccfb6dd8..026dfa8338 100644 --- a/configs/ds414_defconfig +++ b/configs/ds414_defconfig @@ -10,14 +10,17 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y diff --git a/configs/duovero_defconfig b/configs/duovero_defconfig index ced8156a73..d291c4075c 100644 --- a/configs/duovero_defconfig +++ b/configs/duovero_defconfig @@ -14,11 +14,11 @@ CONFIG_SYS_PROMPT="duovero # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y @@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_SPL_PARTITION_UUIDS=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig index 2e264bce2b..ff0a2a651c 100644 --- a/configs/e2220-1170_defconfig +++ b/configs/e2220-1170_defconfig @@ -8,16 +8,16 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (E2220-1170) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/ea20_defconfig b/configs/ea20_defconfig index 683f4ba27b..3d2d4a3c80 100644 --- a/configs/ea20_defconfig +++ b/configs/ea20_defconfig @@ -18,11 +18,11 @@ CONFIG_SYS_PROMPT="ea20 > " CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig index b04d4ab985..979dd0e171 100644 --- a/configs/eb_cpu5282_defconfig +++ b/configs/eb_cpu5282_defconfig @@ -7,8 +7,8 @@ CONFIG_BOOTDELAY=5 # CONFIG_CONSOLE_MUX is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="\nEB+CPU5282> " -# CONFIG_CMD_LOADB is not set CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig index b498f2daf0..bb5f2d1aaa 100644 --- a/configs/eb_cpu5282_internal_defconfig +++ b/configs/eb_cpu5282_internal_defconfig @@ -6,8 +6,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418" CONFIG_BOOTDELAY=5 # CONFIG_CONSOLE_MUX is not set # CONFIG_DISPLAY_BOARDINFO is not set -# CONFIG_CMD_LOADB is not set CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig index 00261dde3a..28725c8565 100644 --- a/configs/eco5pk_defconfig +++ b/configs/eco5pk_defconfig @@ -12,10 +12,10 @@ CONFIG_SYS_PROMPT="ECO5-PK # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -25,6 +25,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/ecovec_defconfig b/configs/ecovec_defconfig index d3ce6e6b75..24a3112d84 100644 --- a/configs/ecovec_defconfig +++ b/configs/ecovec_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_ECOVEC=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,11 +14,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -CONFIG_CMD_I2C=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/edb9315a_defconfig b/configs/edb9315a_defconfig index adc9a68de2..ebcd0f5b1f 100644 --- a/configs/edb9315a_defconfig +++ b/configs/edb9315a_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_TARGET_EDB93XX=y CONFIG_SYS_EXTRA_OPTIONS="MK_edb9315a" CONFIG_ENV_IS_IN_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/nfs console=ttyAM0,115200 ip=dhcp" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y @@ -9,8 +11,8 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="EDB9315A> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_EXT2=y diff --git a/configs/edison_defconfig b/configs/edison_defconfig index 85108adcde..0aa7a45a91 100644 --- a/configs/edison_defconfig +++ b/configs/edison_defconfig @@ -11,11 +11,11 @@ CONFIG_CMD_GREPENV=y CONFIG_CMD_ENV_CALLBACK=y CONFIG_CMD_ENV_FLAGS=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_DFU=y # CONFIG_CMD_NFS is not set CONFIG_CMD_TIMER=y CONFIG_CMD_HASH=y @@ -24,6 +24,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_EMBED=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_CPU=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y diff --git a/configs/efi-x86_defconfig b/configs/efi-x86_defconfig index d45932bcfc..218b838dd5 100644 --- a/configs/efi-x86_defconfig +++ b/configs/efi-x86_defconfig @@ -5,15 +5,19 @@ CONFIG_TARGET_EFI=y CONFIG_DEBUG_UART=y CONFIG_FIT=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_BOOTM is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y +# CONFIG_CMD_SF_TEST is not set CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/espt_defconfig b/configs/espt_defconfig index b3a9b43f6d..e60b4a3802 100644 --- a/configs/espt_defconfig +++ b/configs/espt_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_ESPT=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 root=1f01" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,9 +14,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index d59ef1b00e..d35b7301d0 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -32,14 +32,14 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -53,12 +53,14 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index b9010d6d37..241aab991e 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -6,20 +6,23 @@ CONFIG_DEFAULT_DEVICE_TREE="ethernut5" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_UNZIP=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_SAVES=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_RARP=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -33,6 +36,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y +CONFIG_CMD_REISER=y CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_DM=y diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig index ae650fc5d7..95ddc9c13f 100644 --- a/configs/evb-ast2500_defconfig +++ b/configs/evb-ast2500_defconfig @@ -5,6 +5,8 @@ CONFIG_TARGET_EVB_AST2500=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DEFAULT_DEVICE_TREE="ast2500-evb" CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_PRE_CON_BUF_ADDR=0x1e720000 # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_defconfig index dae5094443..72e492faaa 100644 --- a/configs/evb-px5_defconfig +++ b/configs/evb-px5_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_ROCKCHIP_RK3368=y CONFIG_TARGET_EVB_PX5=y CONFIG_DEFAULT_DEVICE_TREE="rk3368-px5-evb" diff --git a/configs/evb-rk3036_defconfig b/configs/evb-rk3036_defconfig index f6affc303a..65c0624157 100644 --- a/configs/evb-rk3036_defconfig +++ b/configs/evb-rk3036_defconfig @@ -14,10 +14,10 @@ CONFIG_ENV_IS_NOWHERE=y CONFIG_SPL_STACK_R=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig index 8b9a288258..f4ad4c2c65 100644 --- a/configs/evb-rk3229_defconfig +++ b/configs/evb-rk3229_defconfig @@ -4,7 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x800 CONFIG_ROCKCHIP_RK322X=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_EVB_RK3229=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3229-evb" diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288_defconfig index a87ffb9abc..bf4accd6c1 100644 --- a/configs/evb-rk3288_defconfig +++ b/configs/evb-rk3288_defconfig @@ -2,24 +2,23 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_EVB_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb" CONFIG_DEBUG_UART=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SILENT_CONSOLE=y -CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/fennec-rk3288_defconfig b/configs/fennec-rk3288_defconfig index 9d2b3199bc..49713f2e05 100644 --- a/configs/fennec-rk3288_defconfig +++ b/configs/fennec-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_FENNEC_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-fennec" @@ -14,13 +14,13 @@ CONFIG_CONSOLE_MUX=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index 99a3f63b3e..ae724ea4ca 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_FIREFLY_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly" @@ -13,13 +13,13 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/flea3_defconfig b/configs/flea3_defconfig index 11cd196cbd..15eee78eb8 100644 --- a/configs/flea3_defconfig +++ b/configs/flea3_defconfig @@ -8,9 +8,9 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="flea3 U-Boot > " +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index fb6e84fe52..6ad7f1bcb9 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -8,17 +8,20 @@ CONFIG_GENERATE_ACPI_TABLE=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig index 278857ea66..4a8d5ce6b4 100644 --- a/configs/ge_b450v3_defconfig +++ b/configs/ge_b450v3_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig index ded0fb1280..ae3257729c 100644 --- a/configs/ge_b650v3_defconfig +++ b/configs/ge_b650v3_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig index 574e91688a..0a562432b9 100644 --- a/configs/ge_b850v3_defconfig +++ b/configs/ge_b850v3_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_CACHE=y diff --git a/configs/geekbox_defconfig b/configs/geekbox_defconfig index a1944b4ccf..0fd89d23e4 100644 --- a/configs/geekbox_defconfig +++ b/configs/geekbox_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_ROCKCHIP_RK3368=y CONFIG_TARGET_GEEKBOX=y CONFIG_DEFAULT_DEVICE_TREE="rk3368-geekbox" diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index 8aba336184..fe1a8d5930 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -8,8 +8,8 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="GoFlexHome> " # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/gose_defconfig b/configs/gose_defconfig index 4427f72722..f26ba402c0 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/gplugd_defconfig b/configs/gplugd_defconfig index 262eef7989..6404dd8836 100644 --- a/configs/gplugd_defconfig +++ b/configs/gplugd_defconfig @@ -7,8 +7,8 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/gurnard_defconfig b/configs/gurnard_defconfig index e8d1a8447f..1a27fcfcaa 100644 --- a/configs/gurnard_defconfig +++ b/configs/gurnard_defconfig @@ -12,12 +12,12 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_PART=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_PART=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_FAT=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index 51f7d5b6d8..be2f8466b7 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -8,8 +8,8 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index cdf3e92001..f835bf1ff7 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -32,12 +32,15 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL_NAND_OFS=0x1100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index c5b5232016..e48c6e4582 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -32,12 +32,15 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL_NAND_OFS=0x1100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index f399c9796f..936ec62548 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -33,14 +33,17 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Ventana > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL_NAND_OFS=0x1100000 +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/h2200_defconfig b/configs/h2200_defconfig index cdc059a156..6330b02452 100644 --- a/configs/h2200_defconfig +++ b/configs/h2200_defconfig @@ -3,6 +3,8 @@ CONFIG_TARGET_H2200=y CONFIG_FIT=y # CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/ram0 ro console=ttyS0,115200n8" CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set @@ -17,9 +19,9 @@ CONFIG_SYS_PROMPT="> " # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_MEMORY is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index a82166e5b4..b90eaeede9 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -10,11 +10,11 @@ CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 3ed037ba11..d905b0f32b 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -24,6 +24,6 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set -CONFIG_SCSI=y # CONFIG_MMC is not set +CONFIG_SCSI=y CONFIG_OF_LIBFDT=y diff --git a/configs/hikey_defconfig b/configs/hikey_defconfig index be6ff3d549..d9bba7c261 100644 --- a/configs/hikey_defconfig +++ b/configs/hikey_defconfig @@ -6,14 +6,16 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_UNZIP=y +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_MMC_DW=y CONFIG_MMC_DW_K3=y diff --git a/configs/hrcon_defconfig b/configs/hrcon_defconfig index 646a314381..a65fe60b9f 100644 --- a/configs/hrcon_defconfig +++ b/configs/hrcon_defconfig @@ -15,9 +15,10 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_FPGAD=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/hrcon_dh_defconfig b/configs/hrcon_dh_defconfig index b9751a07c6..0ef24599e2 100644 --- a/configs/hrcon_dh_defconfig +++ b/configs/hrcon_dh_defconfig @@ -14,9 +14,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_FPGAD=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y diff --git a/configs/hsdk_defconfig b/configs/hsdk_defconfig index 57c34f8281..d09f4e8614 100644 --- a/configs/hsdk_defconfig +++ b/configs/hsdk_defconfig @@ -7,6 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="hsdk" CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="hsdk# " # CONFIG_CMD_IMLS is not set diff --git a/configs/huawei_hg556a_ram_defconfig b/configs/huawei_hg556a_ram_defconfig index a0a70b294f..73e82bc4cd 100644 --- a/configs/huawei_hg556a_ram_defconfig +++ b/configs/huawei_hg556a_ram_defconfig @@ -24,8 +24,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index 015f7cebb8..cdef8c614c 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -9,8 +9,8 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ib62x0 => " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 4553efdcfb..3872ae930c 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -15,10 +15,10 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n" CONFIG_AUTOBOOT_DELAY_STR="ids" CONFIG_CMD_ENV_FLAGS=y +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/igep0020_defconfig b/configs/igep0020_defconfig index 8ca5a84ec5..600434a4bb 100644 --- a/configs/igep0020_defconfig +++ b/configs/igep0020_defconfig @@ -16,13 +16,15 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_ONENAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y @@ -37,8 +39,10 @@ CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/igep0030_defconfig b/configs/igep0030_defconfig index 8af6dd53d0..abf83c2522 100644 --- a/configs/igep0030_defconfig +++ b/configs/igep0030_defconfig @@ -16,13 +16,15 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_ONENAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y @@ -37,7 +39,9 @@ CONFIG_LED_STATUS_STATE=2 CONFIG_LED_STATUS_BOOT_ENABLE=y CONFIG_LED_STATUS_BOOT=0 CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/igep0032_defconfig b/configs/igep0032_defconfig index dd433309f9..516fb58acd 100644 --- a/configs/igep0032_defconfig +++ b/configs/igep0032_defconfig @@ -15,13 +15,15 @@ CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_ONENAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y @@ -29,7 +31,9 @@ CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set CONFIG_NET_RANDOM_ETHADDR=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/imx31_phycore_eet_defconfig b/configs/imx31_phycore_eet_defconfig index 4bc558be42..e7acb21303 100644 --- a/configs/imx31_phycore_eet_defconfig +++ b/configs/imx31_phycore_eet_defconfig @@ -6,8 +6,8 @@ CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y +CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_CMD_BMP=y diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 526a9f3fd9..1070f892c4 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -13,10 +13,10 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -32,6 +32,7 @@ CONFIG_CMD_MTDPARTS=y # CONFIG_BLK is not set CONFIG_SYS_I2C_MXC=y # CONFIG_DM_MMC_OPS is not set +CONFIG_NAND=y CONFIG_NAND_MXS=y CONFIG_PHYLIB=y CONFIG_FEC_MXC=y diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index d1a2756bda..090480aacb 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -24,9 +24,9 @@ CONFIG_SYS_PROMPT="icorem6qdl> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 5f7e50c477..86216c853e 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -21,9 +21,9 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="icorem6qdl> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y @@ -36,6 +36,7 @@ CONFIG_OF_LIST="imx6q-icore imx6dl-icore" # CONFIG_BLK is not set CONFIG_SYS_I2C_MXC=y # CONFIG_DM_MMC_OPS is not set +CONFIG_NAND=y CONFIG_NAND_MXS=y CONFIG_PHYLIB=y CONFIG_PHY_SMSC=y diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index 80205fe6ad..78128a0872 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -22,9 +22,9 @@ CONFIG_SYS_PROMPT="icorem6qdl-rqs> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y @@ -39,7 +39,6 @@ CONFIG_SYS_I2C_MXC=y # CONFIG_DM_MMC_OPS is not set CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ9021=y CONFIG_FEC_MXC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig index c956f072ce..dfeb083c8f 100644 --- a/configs/imx6ul_geam_mmc_defconfig +++ b/configs/imx6ul_geam_mmc_defconfig @@ -22,9 +22,9 @@ CONFIG_SYS_PROMPT="geam6ul> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig index 372d1015a4..ed81f61759 100644 --- a/configs/imx6ul_geam_nand_defconfig +++ b/configs/imx6ul_geam_nand_defconfig @@ -21,9 +21,9 @@ CONFIG_SYS_PROMPT="geam6ul> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y @@ -35,6 +35,7 @@ CONFIG_CMD_UBI=y # CONFIG_BLK is not set CONFIG_SYS_I2C_MXC=y # CONFIG_DM_MMC_OPS is not set +CONFIG_NAND=y CONFIG_NAND_MXS=y CONFIG_PHYLIB=y CONFIG_PHY_SMSC=y diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index 467a18cd6b..318deb692d 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -22,8 +22,8 @@ CONFIG_SYS_PROMPT="isiotmx6ul> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/imx6ul_isiot_mmc_defconfig b/configs/imx6ul_isiot_mmc_defconfig index 4bb75f7029..8abfbabfcc 100644 --- a/configs/imx6ul_isiot_mmc_defconfig +++ b/configs/imx6ul_isiot_mmc_defconfig @@ -22,9 +22,9 @@ CONFIG_SYS_PROMPT="isiotmx6ul> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index 0acef3f730..ad11ac3a37 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -21,9 +21,9 @@ CONFIG_SYS_PROMPT="isiotmx6ul> " # CONFIG_CMD_IMLS is not set CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y @@ -35,6 +35,7 @@ CONFIG_CMD_UBI=y # CONFIG_BLK is not set CONFIG_SYS_I2C_MXC=y # CONFIG_DM_MMC_OPS is not set +CONFIG_NAND=y CONFIG_NAND_MXS=y CONFIG_PHYLIB=y CONFIG_PHY_SMSC=y diff --git a/configs/inetspace_v2_defconfig b/configs/inetspace_v2_defconfig index e49407155f..4c290c9fed 100644 --- a/configs/inetspace_v2_defconfig +++ b/configs/inetspace_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" IS v2" CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index 0685dca0de..d10379280f 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -3,11 +3,14 @@ CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM720T=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_ARMFLASH=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index 9c27bdb848..ff5ae6380b 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -3,11 +3,14 @@ CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM920T=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_ARMFLASH=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index 77aa6a8bd7..6e00e08f2b 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -3,11 +3,14 @@ CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM926EJ_S=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_ARMFLASH=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index 55bfe3a2a3..68d3a82e5a 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -3,11 +3,14 @@ CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_CM946ES=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Integrator-AP # " CONFIG_CMD_ARMFLASH=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index 1536005ce5..8f315fb357 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM1136=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index 4e43b4f04e..47b44f19fb 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM920T=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index 037cd4dc61..f39f021d89 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM926EJ_S=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index b19162f984..c9c4d98d1f 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -2,6 +2,8 @@ CONFIG_ARM=y CONFIG_ARCH_INTEGRATOR=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CM946ES=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/ipam390_defconfig b/configs/ipam390_defconfig index 0337afa380..80d9f47a65 100644 --- a/configs/ipam390_defconfig +++ b/configs/ipam390_defconfig @@ -17,6 +17,9 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot > " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00180000 +CONFIG_CMD_SPL_WRITE_SIZE=0x400 CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y # CONFIG_CMD_FLASH is not set diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index a533c6402f..b3d860c700 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -9,16 +9,17 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index d0189d2d42..754c15c2c3 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -22,10 +22,10 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set # CONFIG_CMD_MMC is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig index 477221c124..614099bb43 100644 --- a/configs/k2e_hs_evm_defconfig +++ b/configs/k2e_hs_evm_defconfig @@ -11,10 +11,10 @@ CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set # CONFIG_CMD_MMC is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index 0065d34fcd..2b29bf4491 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -21,9 +21,9 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set CONFIG_CMD_REMOTEPROC=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig index 98b9725818..52c1c63141 100644 --- a/configs/k2g_hs_evm_defconfig +++ b/configs/k2g_hs_evm_defconfig @@ -10,9 +10,9 @@ CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set CONFIG_CMD_REMOTEPROC=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 02e100718f..26f1334872 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -22,10 +22,10 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set # CONFIG_CMD_MMC is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig index 696368f4f3..9fc513e5e9 100644 --- a/configs/k2hk_hs_evm_defconfig +++ b/configs/k2hk_hs_evm_defconfig @@ -11,10 +11,10 @@ CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set # CONFIG_CMD_MMC is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index 76ae9b7399..80e6d8bb61 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -22,10 +22,10 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_GPIO is not set # CONFIG_CMD_GPT is not set # CONFIG_CMD_MMC is not set CONFIG_CMD_NAND=y -# CONFIG_CMD_GPIO is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y diff --git a/configs/kc1_defconfig b/configs/kc1_defconfig index 125876e21d..e91f068a0b 100644 --- a/configs/kc1_defconfig +++ b/configs/kc1_defconfig @@ -15,11 +15,11 @@ CONFIG_SYS_PROMPT="kc1 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/km_kirkwood_128m16_defconfig b/configs/km_kirkwood_128m16_defconfig index bbc43c0618..52d298080b 100644 --- a/configs/km_kirkwood_128m16_defconfig +++ b/configs/km_kirkwood_128m16_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/km_kirkwood_defconfig b/configs/km_kirkwood_defconfig index 5a0bafe043..84e5aa7e64 100644 --- a/configs/km_kirkwood_defconfig +++ b/configs/km_kirkwood_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 5c582444e4..8dad336970 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig index 854b4d2850..c234c81a37 100644 --- a/configs/kmcoge4_defconfig +++ b/configs/kmcoge4_defconfig @@ -18,8 +18,8 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index 16f51daede..03b8c1474c 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -13,8 +13,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index 333130eaea..83470131e2 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig index c01d2af1a8..adeab8ff3f 100644 --- a/configs/kmlion1_defconfig +++ b/configs/kmlion1_defconfig @@ -18,8 +18,8 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index fc8be93791..08850cb6cc 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig index 7ddc3f9d33..c3b5378336 100644 --- a/configs/kmsugp1_defconfig +++ b/configs/kmsugp1_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig index 0305572710..e9b7a070ce 100644 --- a/configs/kmsuv31_defconfig +++ b/configs/kmsuv31_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index 618d9df0f5..650c96fd83 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -12,8 +12,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig index b8cede2525..0382b24477 100644 --- a/configs/koelsch_defconfig +++ b/configs/koelsch_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/kylin-rk3036_defconfig b/configs/kylin-rk3036_defconfig index 2ee83b84a2..7d91e08bfd 100644 --- a/configs/kylin-rk3036_defconfig +++ b/configs/kylin-rk3036_defconfig @@ -13,10 +13,10 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SPL_STACK_R=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y diff --git a/configs/kzm9g_defconfig b/configs/kzm9g_defconfig index ac21f979b9..f620480da3 100644 --- a/configs/kzm9g_defconfig +++ b/configs/kzm9g_defconfig @@ -4,6 +4,8 @@ CONFIG_ARCH_RMOBILE=y CONFIG_TARGET_KZM9G=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/null console=ttySC4,115200" CONFIG_VERSION_VARIABLE=y CONFIG_SYS_PROMPT="KZM-A9-GT# " CONFIG_CMD_BOOTZ=y diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 5d2e99d969..799f80a9db 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig new file mode 100644 index 0000000000..73547f8b34 --- /dev/null +++ b/configs/lion-rk3368_defconfig @@ -0,0 +1,94 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ROCKCHIP_RK3368=y +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 +CONFIG_TPL_LIBCOMMON_SUPPORT=y +CONFIG_TPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_STACK_R_ADDR=0x600000 +CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion" +CONFIG_SMBIOS_PRODUCT_NAME="sheep_rk3368" +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/lion_rk3368/fit_spl_atf.its" +CONFIG_ENV_IS_IN_MMC=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_ARCH_EARLY_INIT_R=y +CONFIG_SPL=y +CONFIG_SPL_BOOTROM_SUPPORT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set +CONFIG_TPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 +CONFIG_SPL_ATF_SUPPORT=y +CONFIG_SPL_ATF_TEXT_BASE=0x10000 +CONFIG_TPL=y +CONFIG_TPL_BOOTROM_SUPPORT=y +CONFIG_TPL_DRIVERS_MISC_SUPPORT=y +CONFIG_FASTBOOT=y +CONFIG_ANDROID_BOOT_IMAGE=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_MTDPARTS=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_TPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" +CONFIG_TPL_OF_PLATDATA=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_TPL_DM=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_TPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_TPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_TPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_MICREL=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_ROCKCHIP_RK3368=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_TPL_RAM=y +CONFIG_DEBUG_UART_BASE=0xFF180000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_ROCKCHIP_SPI=y +CONFIG_SYSRESET=y +CONFIG_TIMER=y +CONFIG_SPL_TIMER=y +CONFIG_TPL_TIMER=y +CONFIG_ROCKCHIP_TIMER=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_LZO=y +CONFIG_ERRNO_STR=y +CONFIG_SMBIOS_MANUFACTURER="rockchip" diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig index b69d519f46..274855a72e 100644 --- a/configs/liteboard_defconfig +++ b/configs/liteboard_defconfig @@ -17,9 +17,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig index 09110f60b8..66c7dd389c 100644 --- a/configs/ls1012afrdm_qspi_defconfig +++ b/configs/ls1012afrdm_qspi_defconfig @@ -11,12 +11,14 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index d7ddd812a3..ff58a74986 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -11,14 +11,17 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -31,7 +34,6 @@ CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y -CONFIG_SCSI=y # CONFIG_BLK is not set CONFIG_DM_MMC=y # CONFIG_DM_MMC_OPS is not set @@ -43,6 +45,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig index ec6ed377d4..777a451854 100644 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -10,13 +10,16 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig index 5eb35dfc4a..6a150221b2 100644 --- a/configs/ls1012ardb_qspi_defconfig +++ b/configs/ls1012ardb_qspi_defconfig @@ -11,13 +11,16 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls1021aqds_ddr4_nor_defconfig index bb03f935f1..57adc9a8c8 100644 --- a/configs/ls1021aqds_ddr4_nor_defconfig +++ b/configs/ls1021aqds_ddr4_nor_defconfig @@ -14,12 +14,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig index 1cf0dc0e12..254ad04a02 100644 --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index 69551e78e8..a9d8f56f55 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -28,12 +28,12 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -58,6 +58,7 @@ CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig index 093b109387..b45e05db62 100644 --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -43,6 +43,7 @@ CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig index 5171f2731f..65e641fc56 100644 --- a/configs/ls1021aqds_nor_defconfig +++ b/configs/ls1021aqds_nor_defconfig @@ -14,12 +14,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig index ba3dccabc7..a193993127 100644 --- a/configs/ls1021aqds_nor_lpuart_defconfig +++ b/configs/ls1021aqds_nor_lpuart_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig index eaa6397e2a..cedf9b5594 100644 --- a/configs/ls1021aqds_qspi_defconfig +++ b/configs/ls1021aqds_qspi_defconfig @@ -17,12 +17,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -50,6 +50,7 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index 12d30f1da2..7986470e77 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -26,12 +26,12 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -56,6 +56,7 @@ CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index 13ab20a2a7..7924cbdcea 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -27,12 +27,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -61,6 +61,7 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig index a7c9ae16e7..20f209280d 100644 --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig @@ -3,31 +3,27 @@ CONFIG_TARGET_LS1021ATWR=y CONFIG_SECURE_BOOT=y CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" +CONFIG_DISTRO_DEFAULTS=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_BMP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y @@ -41,6 +37,7 @@ CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y @@ -48,4 +45,3 @@ CONFIG_VIDEO_FSL_DCU_FB=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index 02b3030e81..be55cfe369 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -2,31 +2,27 @@ CONFIG_ARM=y CONFIG_TARGET_LS1021ATWR=y CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_BMP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y @@ -42,9 +38,9 @@ CONFIG_PCIE_LAYERSCAPE=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_VIDEO_FSL_DCU_FB=y # CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index 24573d0848..4d06a3f730 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -9,17 +9,19 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -43,6 +45,7 @@ CONFIG_PCIE_LAYERSCAPE=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig index 27e1dcf3f0..3a5e504120 100644 --- a/configs/ls1021atwr_qspi_defconfig +++ b/configs/ls1021atwr_qspi_defconfig @@ -10,6 +10,8 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -17,12 +19,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -50,6 +52,7 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index 4e99c6976a..e0483e0159 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -9,12 +9,15 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_BOOTDELAY=0 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -26,21 +29,14 @@ CONFIG_SPL_HASH_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_BMP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -56,6 +52,7 @@ CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y @@ -63,4 +60,3 @@ CONFIG_VIDEO_FSL_DCU_FB=y # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_RSA=y CONFIG_SPL_RSA=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index 9baf6543dd..3074689237 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -15,6 +16,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -24,21 +27,14 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_BMP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -54,9 +50,9 @@ CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y CONFIG_SYS_NS16550=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_VIDEO_FSL_DCU_FB=y # CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index abdfb66f62..0df54d86f4 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -15,6 +16,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" CONFIG_SILENT_CONSOLE=y # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y @@ -24,23 +27,16 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_BMP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -61,9 +57,9 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_VIDEO_FSL_DCU_FB=y # CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig index 147c2ae61d..3454ad4f95 100644 --- a/configs/ls1043aqds_defconfig +++ b/configs/ls1043aqds_defconfig @@ -6,16 +6,18 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig index 73ed2aa339..4dbb8e1605 100644 --- a/configs/ls1043aqds_lpuart_defconfig +++ b/configs/ls1043aqds_lpuart_defconfig @@ -7,16 +7,18 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index 1223a8e8bf..abdacb2113 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" CONFIG_NAND_BOOT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 @@ -23,13 +25,13 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig index c0bdb79ff4..734b5beb76 100644 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ b/configs/ls1043aqds_nor_ddr3_defconfig @@ -6,16 +6,18 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index 8d1bd11cbf..183dabfdfe 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -8,16 +8,18 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index 2765cc6d46..a521ea5694 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 @@ -23,13 +25,13 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index a2e6aa7e34..fed5a73160 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 @@ -24,12 +26,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index 216ed16b46..80ab13be84 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -3,23 +3,19 @@ CONFIG_TARGET_LS1043ARDB=y CONFIG_SECURE_BOOT=y CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 -CONFIG_HUSH_PARSER=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_PXE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y @@ -42,4 +38,3 @@ CONFIG_USB_STORAGE=y CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig index 2639876c34..94e321e727 100644 --- a/configs/ls1043ardb_defconfig +++ b/configs/ls1043ardb_defconfig @@ -2,24 +2,20 @@ CONFIG_ARM=y CONFIG_TARGET_LS1043ARDB=y CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 -CONFIG_HUSH_PARSER=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_PXE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y @@ -40,4 +36,3 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index df14007376..5c8599ed0c 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -14,6 +14,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 @@ -23,10 +25,10 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index 5a372a93de..a9aa9a2972 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" CONFIG_NAND_BOOT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 @@ -22,10 +24,10 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_PXE=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index 8791642c06..bdd7ea710e 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -9,11 +9,14 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 @@ -21,20 +24,13 @@ CONFIG_SPL_CRYPTO_SUPPORT=y CONFIG_SPL_HASH_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_PXE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -58,4 +54,3 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_RSA=y CONFIG_SPL_RSA=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index ffea119b07..8f8bb4bfa4 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -9,31 +9,27 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_HUSH_PARSER=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_PXE=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -55,4 +51,3 @@ CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig index d6cc64d61b..f2d698ccbb 100644 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -6,23 +6,26 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index 2daff11c4b..5b8d20bda4 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -6,23 +6,26 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index c07df3a8d1..288331a8ac 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -7,23 +7,25 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="LPUART" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 2bf7e0e825..6fd5359405 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_NAND_BOOT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -15,20 +17,21 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index 321a3f418f..eb2877d8a0 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -7,23 +7,26 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index bd7525e65a..65918c044b 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -15,20 +17,21 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 6e965eb86b..853b5eadd1 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT_QSPI" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:2m(uboot),14m(free)" CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -16,19 +18,20 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index cc1046ce81..5a0bc4a6fe 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -8,6 +8,8 @@ CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,EMMC_BOOT" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y @@ -15,17 +17,18 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y -CONFIG_CMD_USB=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig index bc0b2941b2..cd45df0882 100644 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -4,24 +4,22 @@ CONFIG_SECURE_BOOT=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 -CONFIG_HUSH_PARSER=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_SPI_FLASH=y @@ -39,4 +37,3 @@ CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_RSA=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index 98a88c4f0e..9be3458d41 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -3,25 +3,23 @@ CONFIG_TARGET_LS1046ARDB=y CONFIG_FSL_LS_PPA=y CONFIG_QSPI_AHB_INIT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 -CONFIG_HUSH_PARSER=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_FSL_CAAM=y @@ -39,4 +37,3 @@ CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index ed9d44531d..dbdae33834 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -3,30 +3,28 @@ CONFIG_TARGET_LS1046ARDB=y CONFIG_SECURE_BOOT=y CONFIG_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_CRYPTO_SUPPORT=y CONFIG_SPL_HASH_SUPPORT=y -CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -47,4 +45,3 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_RSA=y CONFIG_SPL_RSA=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index 8b244264b4..666b892994 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -3,30 +3,28 @@ CONFIG_TARGET_LS1046ARDB=y CONFIG_FSL_LS_PPA=y CONFIG_SPL_FSL_LS_PPA=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.quadspi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DM=y @@ -45,4 +43,3 @@ CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls2080a_emu_defconfig b/configs/ls2080a_emu_defconfig index 04e6433986..89169b440d 100644 --- a/configs/ls2080a_emu_defconfig +++ b/configs/ls2080a_emu_defconfig @@ -8,6 +8,8 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="EMU" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set @@ -15,9 +17,9 @@ CONFIG_BOOTDELAY=10 # CONFIG_CMD_EDITENV is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/ls2080a_simu_defconfig b/configs/ls2080a_simu_defconfig index 1a4f80c211..604f64efe8 100644 --- a/configs/ls2080a_simu_defconfig +++ b/configs/ls2080a_simu_defconfig @@ -8,6 +8,8 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SIMU" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set @@ -15,11 +17,11 @@ CONFIG_BOOTDELAY=10 # CONFIG_CMD_EDITENV is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index aace6b4c2f..c80a83708b 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -8,13 +8,16 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index d8d2f4ac23..39e1522c72 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -8,13 +8,16 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 76e571b70f..b8e16b2453 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -10,10 +10,11 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_NAND_BOOT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_SPL=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y @@ -21,10 +22,11 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y @@ -36,6 +38,7 @@ CONFIG_OF_EMBED=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y +CONFIG_NAND=y CONFIG_DM_SPI_FLASH=y CONFIG_PHYLIB=y CONFIG_NETDEVICES=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index 5560d1a4fd..9f5b8adafc 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -9,13 +9,16 @@ CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index 55fc51fbac..d59fa6ff0b 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -14,6 +14,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4" CONFIG_SD_BOOT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 @@ -21,10 +23,11 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index b035e57062..4a462ce77e 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -8,13 +8,16 @@ CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index ad63173e1b..3a66f84900 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -8,13 +8,16 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y @@ -42,4 +45,3 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index dc8c84778b..ac2ab22031 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -10,10 +10,11 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_NAND_BOOT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" CONFIG_SPL=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y @@ -21,9 +22,10 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y @@ -33,6 +35,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_FSL_CAAM=y CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index 7b8718e8dc..5532d8d842 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -10,19 +10,21 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y -CONFIG_SCSI=y CONFIG_FSL_CAAM=y CONFIG_DM_SPI_FLASH=y CONFIG_PHYLIB=y @@ -33,6 +35,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig index 860e9c601c..fddcba02ff 100644 --- a/configs/ls2088ardb_qspi_defconfig +++ b/configs/ls2088ardb_qspi_defconfig @@ -10,12 +10,15 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_QSPI_BOOT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y @@ -42,4 +45,3 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y -CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig index 8a645a08a3..704cb71267 100644 --- a/configs/lschlv2_defconfig +++ b/configs/lschlv2_defconfig @@ -5,14 +5,16 @@ CONFIG_IDENT_STRING=" LS-CHLv2" CONFIG_SYS_EXTRA_OPTIONS="LSCHLV2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/sda2" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig index 1c9dc805b3..9ddec4fe3d 100644 --- a/configs/lsxhl_defconfig +++ b/configs/lsxhl_defconfig @@ -7,12 +7,14 @@ CONFIG_SYS_EXTRA_OPTIONS="LSXHL" CONFIG_API=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/sda2" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y diff --git a/configs/m28evk_defconfig b/configs/m28evk_defconfig index 3fec6e972a..5edf2ac8ae 100644 --- a/configs/m28evk_defconfig +++ b/configs/m28evk_defconfig @@ -8,6 +8,8 @@ CONFIG_VIDEO=y CONFIG_FIT=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 " # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_VERSION_VARIABLE=y @@ -20,13 +22,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/m53evk_defconfig b/configs/m53evk_defconfig index 061c5883ba..a3d86f5b3c 100644 --- a/configs/m53evk_defconfig +++ b/configs/m53evk_defconfig @@ -12,6 +12,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aries/m53evk/imximage.cfg" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttymxc1,115200" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_VERSION_VARIABLE=y @@ -22,12 +24,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/ma5d4evk_defconfig b/configs/ma5d4evk_defconfig index c18f759ce3..64493180ba 100644 --- a/configs/ma5d4evk_defconfig +++ b/configs/ma5d4evk_defconfig @@ -11,6 +11,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4" CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS3,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y @@ -21,14 +23,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y -# CONFIG_CMD_LOADS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index a342bec808..9a4ef2746b 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -6,10 +6,11 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="malta # " # CONFIG_AUTOBOOT is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -20,3 +21,4 @@ CONFIG_OF_EMBED=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y CONFIG_SYS_NS16550=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index ac560460eb..1d076d46fa 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -7,10 +7,11 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="maltael # " # CONFIG_AUTOBOOT is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -21,3 +22,4 @@ CONFIG_OF_EMBED=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y CONFIG_SYS_NS16550=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/malta_defconfig b/configs/malta_defconfig index e4e21d0f0f..6c7034e11d 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -5,10 +5,11 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="malta # " # CONFIG_AUTOBOOT is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -19,3 +20,4 @@ CONFIG_OF_EMBED=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y CONFIG_SYS_NS16550=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index 0b9f665f10..c19f9256aa 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -6,10 +6,11 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="maltael # " # CONFIG_AUTOBOOT is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -20,3 +21,4 @@ CONFIG_OF_EMBED=y CONFIG_MTD_NOR_FLASH=y CONFIG_PCI=y CONFIG_SYS_NS16550=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig index 54b8d7e58a..f329635345 100644 --- a/configs/marsboard_defconfig +++ b/configs/marsboard_defconfig @@ -11,11 +11,11 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_DM=y diff --git a/configs/maxbcm_defconfig b/configs/maxbcm_defconfig index ec4b47ce59..131d5e1d8e 100644 --- a/configs/maxbcm_defconfig +++ b/configs/maxbcm_defconfig @@ -16,9 +16,9 @@ CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 93e582e209..2e23e54fd5 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -14,11 +14,11 @@ CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 5a75292a45..587a23bef6 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -15,11 +15,11 @@ CONFIG_SPL_NOR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig index 0b65b730c4..d46ed4c061 100644 --- a/configs/mcx_defconfig +++ b/configs/mcx_defconfig @@ -16,12 +16,12 @@ CONFIG_SYS_PROMPT="mcx # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -34,6 +34,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index cc04a02414..d52aeab53e 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -11,11 +11,11 @@ CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y diff --git a/configs/meesc_dataflash_defconfig b/configs/meesc_dataflash_defconfig index 049ac61317..d327ed9e47 100644 --- a/configs/meesc_dataflash_defconfig +++ b/configs/meesc_dataflash_defconfig @@ -12,13 +12,12 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y -# CONFIG_MMC is not set CONFIG_OF_CONTROL=y CONFIG_DM=y CONFIG_CLK=y @@ -26,7 +25,6 @@ CONFIG_CLK_AT91=y CONFIG_DM_GPIO=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set -CONFIG_OF_LIBFDT=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig index 7d721c2bf9..db5bf60ca8 100644 --- a/configs/meesc_defconfig +++ b/configs/meesc_defconfig @@ -12,10 +12,10 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig index cf169e3fc3..60e017bd49 100644 --- a/configs/mgcoge3un_defconfig +++ b/configs/mgcoge3un_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 12dcd00767..953801e6d0 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -12,6 +12,8 @@ CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=romfs" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL=y CONFIG_SPL_BOARD_INIT=y @@ -21,8 +23,10 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SYS_OS_BASE=0x2c060000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot-mONStR> " +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GPIO=y +CONFIG_CMD_SAVES=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y @@ -33,6 +37,7 @@ CONFIG_CMD_UBI=y # CONFIG_CMD_UBIFS is not set CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y +CONFIG_ENV_IS_IN_FLASH=y CONFIG_NETCONSOLE=y CONFIG_SPL_DM=y CONFIG_MTD_NOR_FLASH=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index 0d58848e3c..ad97ad07b3 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -15,17 +15,20 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index a7c796d062..78d460cd4b 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_MIQI_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-miqi" @@ -13,13 +13,13 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/mpc8308_p1m_defconfig b/configs/mpc8308_p1m_defconfig index 93031800d0..deee406f53 100644 --- a/configs/mpc8308_p1m_defconfig +++ b/configs/mpc8308_p1m_defconfig @@ -7,6 +7,7 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=5 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mpr2_defconfig b/configs/mpr2_defconfig index efa0f7fe1c..8dd63ab5d7 100644 --- a/configs/mpr2_defconfig +++ b/configs/mpr2_defconfig @@ -1,5 +1,7 @@ CONFIG_SH=y CONFIG_TARGET_MPR2=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set @@ -11,9 +13,9 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/ms7720se_defconfig b/configs/ms7720se_defconfig index 7f137fa911..24c0598269 100644 --- a/configs/ms7720se_defconfig +++ b/configs/ms7720se_defconfig @@ -1,5 +1,7 @@ CONFIG_SH=y CONFIG_TARGET_MS7720SE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set @@ -11,10 +13,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCMCIA=y +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set @@ -26,5 +30,5 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_DOS_PARTITION=y CONFIG_MTD_NOR_FLASH=y -CONFIG_USE_PRIVATE_LIBGCC=y CONFIG_SCIF_CONSOLE=y +CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/ms7722se_defconfig b/configs/ms7722se_defconfig index 37cf8776c2..4c46c35fb5 100644 --- a/configs/ms7722se_defconfig +++ b/configs/ms7722se_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_MS7722SE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 root=1f01" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,9 +14,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/ms7750se_defconfig b/configs/ms7750se_defconfig index 402be86060..8cc895ed7a 100644 --- a/configs/ms7750se_defconfig +++ b/configs/ms7750se_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_MS7750SE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,38400" # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set @@ -12,9 +14,9 @@ CONFIG_BOOTDELAY=-1 # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_MEMORY is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig index 2a46c1916e..c4bad6600a 100644 --- a/configs/mt_ventoux_defconfig +++ b/configs/mt_ventoux_defconfig @@ -15,12 +15,12 @@ CONFIG_SYS_PROMPT="mt_ventoux => " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_FPGA_LOADMK=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -31,6 +31,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/mvebu_db-88f3720_defconfig b/configs/mvebu_db-88f3720_defconfig index aa4bf2ada6..faa87b128b 100644 --- a/configs/mvebu_db-88f3720_defconfig +++ b/configs/mvebu_db-88f3720_defconfig @@ -14,14 +14,14 @@ CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/mvebu_db_armada8k_defconfig b/configs/mvebu_db_armada8k_defconfig index 67ce751b34..3ca4c563c5 100644 --- a/configs/mvebu_db_armada8k_defconfig +++ b/configs/mvebu_db_armada8k_defconfig @@ -16,13 +16,14 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig index 66dcac99a7..bfcb2de5b3 100644 --- a/configs/mvebu_espressobin-88f3720_defconfig +++ b/configs/mvebu_espressobin-88f3720_defconfig @@ -14,13 +14,13 @@ CONFIG_ARCH_EARLY_INIT_R=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/mvebu_mcbin-88f8040_defconfig b/configs/mvebu_mcbin-88f8040_defconfig index 92763c9279..00c47b2727 100644 --- a/configs/mvebu_mcbin-88f8040_defconfig +++ b/configs/mvebu_mcbin-88f8040_defconfig @@ -16,14 +16,15 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig index 169cd6aeb3..66cb3e226c 100644 --- a/configs/mx23_olinuxino_defconfig +++ b/configs/mx23_olinuxino_defconfig @@ -13,9 +13,9 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_CACHE=y diff --git a/configs/mx23evk_defconfig b/configs/mx23evk_defconfig index c70035d624..5b54cade0d 100644 --- a/configs/mx23evk_defconfig +++ b/configs/mx23evk_defconfig @@ -17,9 +17,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/mx25pdk_defconfig b/configs/mx25pdk_defconfig index 4f3516fc2e..08840e88f0 100644 --- a/configs/mx25pdk_defconfig +++ b/configs/mx25pdk_defconfig @@ -8,8 +8,8 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx28evk_auart_console_defconfig b/configs/mx28evk_auart_console_defconfig index 0f46630464..48d62fd1c1 100644 --- a/configs/mx28evk_auart_console_defconfig +++ b/configs/mx28evk_auart_console_defconfig @@ -18,13 +18,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index b50cbc0a63..a3220dea2d 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -18,13 +18,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig index 1c65488ecb..b2ad223ba5 100644 --- a/configs/mx28evk_nand_defconfig +++ b/configs/mx28evk_nand_defconfig @@ -17,13 +17,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx28evk_spi_defconfig b/configs/mx28evk_spi_defconfig index e14e3277c0..c861da7f02 100644 --- a/configs/mx28evk_spi_defconfig +++ b/configs/mx28evk_spi_defconfig @@ -17,13 +17,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx35pdk_defconfig b/configs/mx35pdk_defconfig index 327dbfae3a..82c6212fc3 100644 --- a/configs/mx35pdk_defconfig +++ b/configs/mx35pdk_defconfig @@ -6,10 +6,10 @@ CONFIG_BOOTDELAY=1 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig index 2ea2e6783c..1ba68aa834 100644 --- a/configs/mx51evk_defconfig +++ b/configs/mx51evk_defconfig @@ -12,10 +12,10 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_FUSE=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_FUSE=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx53ard_defconfig b/configs/mx53ard_defconfig index 5260c9fad5..bda59d6f2b 100644 --- a/configs/mx53ard_defconfig +++ b/configs/mx53ard_defconfig @@ -9,9 +9,9 @@ CONFIG_DEFAULT_FDT_FILE="imx53-ard.dtb" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx53evk_defconfig b/configs/mx53evk_defconfig index 23cc9d9059..5c273f7824 100644 --- a/configs/mx53evk_defconfig +++ b/configs/mx53evk_defconfig @@ -6,8 +6,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig index d920aad386..0967d1405f 100644 --- a/configs/mx53loco_defconfig +++ b/configs/mx53loco_defconfig @@ -14,8 +14,8 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx53smd_defconfig b/configs/mx53smd_defconfig index 636bfa69e2..f5e6a33d49 100644 --- a/configs/mx53smd_defconfig +++ b/configs/mx53smd_defconfig @@ -7,8 +7,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 766a12c1d1..820364a476 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -21,10 +21,10 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_PARTITION_UUIDS is not set diff --git a/configs/mx6dlarm2_defconfig b/configs/mx6dlarm2_defconfig index 4a6d98b260..a7cd16c091 100644 --- a/configs/mx6dlarm2_defconfig +++ b/configs/mx6dlarm2_defconfig @@ -10,9 +10,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6dlarm2_lpddr2_defconfig b/configs/mx6dlarm2_lpddr2_defconfig index cae96780d4..42f51963a7 100644 --- a/configs/mx6dlarm2_lpddr2_defconfig +++ b/configs/mx6dlarm2_lpddr2_defconfig @@ -10,9 +10,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6qarm2_defconfig b/configs/mx6qarm2_defconfig index 851359d1a8..cadd612c5b 100644 --- a/configs/mx6qarm2_defconfig +++ b/configs/mx6qarm2_defconfig @@ -10,9 +10,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6qarm2_lpddr2_defconfig b/configs/mx6qarm2_lpddr2_defconfig index 3f00ffaf7b..b62424495a 100644 --- a/configs/mx6qarm2_lpddr2_defconfig +++ b/configs/mx6qarm2_lpddr2_defconfig @@ -10,9 +10,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig index 873199261e..378493b741 100644 --- a/configs/mx6qsabrelite_defconfig +++ b/configs/mx6qsabrelite_defconfig @@ -14,13 +14,13 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_SATA=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index 98327942c9..64062bed53 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -21,16 +21,16 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index e42e9c88cd..7949c5e071 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -22,13 +22,16 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_WRITE_SIZE=0x20000 # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index 63867deb52..ee27daa68e 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -11,11 +11,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index e4dd692cea..354eae3f57 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index 215bde61f6..f70a8392bc 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -19,11 +19,11 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx6sllevk_defconfig b/configs/mx6sllevk_defconfig index f60e2f94d2..916fa091fa 100644 --- a/configs/mx6sllevk_defconfig +++ b/configs/mx6sllevk_defconfig @@ -11,10 +11,10 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/mx6sllevk_plugin_defconfig b/configs/mx6sllevk_plugin_defconfig index 85e3341035..12f865713d 100644 --- a/configs/mx6sllevk_plugin_defconfig +++ b/configs/mx6sllevk_plugin_defconfig @@ -12,10 +12,10 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig index 84dcbbe7be..a8144fe802 100644 --- a/configs/mx6sxsabreauto_defconfig +++ b/configs/mx6sxsabreauto_defconfig @@ -9,13 +9,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index ed38c68448..2f0c45d2dc 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -11,10 +11,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig index 93108a3545..169eb738cd 100644 --- a/configs/mx6sxsabresd_spl_defconfig +++ b/configs/mx6sxsabresd_spl_defconfig @@ -21,10 +21,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 11e6018230..f4b95f309a 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -22,11 +22,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig index a512ea96cb..dfb029f1c2 100644 --- a/configs/mx6ul_9x9_evk_defconfig +++ b/configs/mx6ul_9x9_evk_defconfig @@ -22,11 +22,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_BMP=y diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig index 133cda74fa..2c03f8cba8 100644 --- a/configs/mx6ull_14x14_evk_defconfig +++ b/configs/mx6ull_14x14_evk_defconfig @@ -10,9 +10,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/mx6ull_14x14_evk_plugin_defconfig b/configs/mx6ull_14x14_evk_plugin_defconfig index 9349155de7..1a5bbb6265 100644 --- a/configs/mx6ull_14x14_evk_plugin_defconfig +++ b/configs/mx6ull_14x14_evk_plugin_defconfig @@ -11,9 +11,9 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig index a5e3b18655..7c99420e85 100644 --- a/configs/mx7dsabresd_defconfig +++ b/configs/mx7dsabresd_defconfig @@ -20,12 +20,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx7dsabresd_secure_defconfig b/configs/mx7dsabresd_secure_defconfig index 4e53cd813d..ea087d2af4 100644 --- a/configs/mx7dsabresd_secure_defconfig +++ b/configs/mx7dsabresd_secure_defconfig @@ -21,13 +21,13 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index bbd5ca97ad..5918f3c0c7 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -5,9 +5,9 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg" CONFIG_ENV_IS_IN_MMC=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DM=y diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig index bbd5ca97ad..5918f3c0c7 100644 --- a/configs/mx7ulp_evk_plugin_defconfig +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -5,9 +5,9 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg" CONFIG_ENV_IS_IN_MMC=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_DM=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index a5273d2729..19bd043bc7 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -8,8 +8,8 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nas220> " # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/net2big_v2_defconfig b/configs/net2big_v2_defconfig index 8135b86ee7..362875b92c 100644 --- a/configs/net2big_v2_defconfig +++ b/configs/net2big_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" 2Big v2" CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="2big2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/netgear_cg3100d_ram_defconfig b/configs/netgear_cg3100d_ram_defconfig index e3537943e5..9eb2f3cf09 100644 --- a/configs/netgear_cg3100d_ram_defconfig +++ b/configs/netgear_cg3100d_ram_defconfig @@ -23,9 +23,9 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/netspace_lite_v2_defconfig b/configs/netspace_lite_v2_defconfig index 9020a36857..1d14f24adb 100644 --- a/configs/netspace_lite_v2_defconfig +++ b/configs/netspace_lite_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" NS v2 Lite" CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/netspace_max_v2_defconfig b/configs/netspace_max_v2_defconfig index 741b4a5e42..aec12f4049 100644 --- a/configs/netspace_max_v2_defconfig +++ b/configs/netspace_max_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" NS Max v2" CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/netspace_mini_v2_defconfig b/configs/netspace_mini_v2_defconfig index 569e0167c1..864fdf5527 100644 --- a/configs/netspace_mini_v2_defconfig +++ b/configs/netspace_mini_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" NS v2 Mini" CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/netspace_v2_defconfig b/configs/netspace_v2_defconfig index 64a83a4f73..f028fefd7d 100644 --- a/configs/netspace_v2_defconfig +++ b/configs/netspace_v2_defconfig @@ -5,16 +5,18 @@ CONFIG_IDENT_STRING=" NS v2" CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ns2> " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y +CONFIG_CMD_IDE=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/nitrogen6dl2g_defconfig b/configs/nitrogen6dl2g_defconfig index 3b476ca211..76945e0715 100644 --- a/configs/nitrogen6dl2g_defconfig +++ b/configs/nitrogen6dl2g_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/nitrogen6dl_defconfig b/configs/nitrogen6dl_defconfig index 51a94f09db..e4ca549960 100644 --- a/configs/nitrogen6dl_defconfig +++ b/configs/nitrogen6dl_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/nitrogen6q2g_defconfig b/configs/nitrogen6q2g_defconfig index 2e37a92a46..0449c9ea95 100644 --- a/configs/nitrogen6q2g_defconfig +++ b/configs/nitrogen6q2g_defconfig @@ -14,13 +14,13 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_SATA=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/nitrogen6q_defconfig b/configs/nitrogen6q_defconfig index b432b95a73..96e35629a6 100644 --- a/configs/nitrogen6q_defconfig +++ b/configs/nitrogen6q_defconfig @@ -14,13 +14,13 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SATA=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_SATA=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/nitrogen6s1g_defconfig b/configs/nitrogen6s1g_defconfig index 4e39e09c73..c326ba97c8 100644 --- a/configs/nitrogen6s1g_defconfig +++ b/configs/nitrogen6s1g_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/nitrogen6s_defconfig b/configs/nitrogen6s_defconfig index 436574425f..a56aa82d12 100644 --- a/configs/nitrogen6s_defconfig +++ b/configs/nitrogen6s_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 3802bc57d1..4a7f965d4d 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -16,10 +16,10 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set @@ -28,5 +28,6 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_CFB_CONSOLE_ANSI=y # CONFIG_VGA_AS_SINGLE_DEVICE is not set diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 9ffffe010b..d6717a1303 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -16,6 +16,8 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttymxc1,115200 " CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y @@ -25,11 +27,12 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index 276df2f9a2..ad9880e306 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -8,8 +8,8 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="nsa310s => " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/nsim_700_defconfig b/configs/nsim_700_defconfig index fabae32ed5..59aabfb4a8 100644 --- a/configs/nsim_700_defconfig +++ b/configs/nsim_700_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyARC0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/nsim_700be_defconfig b/configs/nsim_700be_defconfig index 021735f743..dc54a04d1f 100644 --- a/configs/nsim_700be_defconfig +++ b/configs/nsim_700be_defconfig @@ -6,6 +6,8 @@ CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyARC0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/nsim_hs38_defconfig b/configs/nsim_hs38_defconfig index db172394a3..5a9ef362ce 100644 --- a/configs/nsim_hs38_defconfig +++ b/configs/nsim_hs38_defconfig @@ -6,6 +6,8 @@ CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyARC0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/nsim_hs38be_defconfig b/configs/nsim_hs38be_defconfig index 8ffbb85a7a..7d62206898 100644 --- a/configs/nsim_hs38be_defconfig +++ b/configs/nsim_hs38be_defconfig @@ -7,6 +7,8 @@ CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyARC0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 03d83c1268..c8cad61497 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -15,16 +15,16 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_BMP=y diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 121dcf2d6c..214545ef37 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -11,10 +11,10 @@ CONFIG_ENV_IS_NOWHERE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_MMC=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index ffcecd5fd2..7aadc44db5 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -12,12 +12,13 @@ CONFIG_SILENT_CONSOLE=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_PROMPT="ODROID-XU3 # " # CONFIG_CMD_IMLS is not set -CONFIG_CMD_MMC=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index 22e86e28c3..9c0024541d 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="Please use defined boot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y @@ -13,15 +15,16 @@ CONFIG_SYS_PROMPT="Odroid # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index 1a134df1bb..c97dfed40d 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -3,7 +3,6 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TARGET_OMAP3_BEAGLE=y CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y @@ -11,14 +10,16 @@ CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x240000 CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y @@ -35,7 +36,9 @@ CONFIG_LED_STATUS_GREEN_ENABLE=y CONFIG_LED_STATUS_GREEN=2 CONFIG_LED_STATUS_CMD=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 620148c245..a07ea0fd55 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -2,32 +2,62 @@ CONFIG_ARM=y # CONFIG_SYS_THUMB_BUILD is not set CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SYS_MPUCLK=720 CONFIG_TARGET_OMAP3_EVM=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" +CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_STACK_R=y # CONFIG_SPL_EXT_SUPPORT is not set -CONFIG_HUSH_PARSER=y +CONFIG_SPL_MTD_SUPPORT=y CONFIG_SYS_PROMPT="OMAP3_EVM # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_EFI_PARTITION=y -# CONFIG_PARTITION_UUIDS is not set -# CONFIG_SPL_PARTITION_UUIDS is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FS_UUID=y +CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1792k(u-boot),128k(dtb),128k(u-boot-env),6m(kernel),-(rootfs)" +CONFIG_CMD_UBI=y +# CONFIG_ISO_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +CONFIG_SPL_PARTITION_UUIDS=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_DM_GPIO=y CONFIG_MMC_OMAP_HS=y +CONFIG_MTD=y +CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y -CONFIG_USB_STORAGE=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Texas Instruments" +CONFIG_G_DNL_VENDOR_NUM=0x0451 +CONFIG_G_DNL_PRODUCT_NUM=0x5678 +CONFIG_FAT_WRITE=y +CONFIG_OF_LIBFDT=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_SPL_OF_LIBFDT=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig index f88c2e197a..5c019a3794 100644 --- a/configs/omap3_ha_defconfig +++ b/configs/omap3_ha_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -26,6 +26,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index 1eb1ff8f12..cff886a12c 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -5,7 +5,6 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_OMAP3_LOGIC=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit" -CONFIG_SYS_EXTRA_OPTIONS="NAND" # CONFIG_ENV_IS_IN_FAT is not set CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_CONSOLE_INFO_QUIET=y @@ -19,12 +18,14 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="OMAP Logic # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x240000 # CONFIG_CMD_EEPROM is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_USB is not set -# CONFIG_CMD_FPGA is not set CONFIG_CMD_CACHE=y CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y @@ -34,7 +35,9 @@ CONFIG_DM_I2C=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_OMAP36XX_PINS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_GADGET=y diff --git a/configs/omap3_overo_defconfig b/configs/omap3_overo_defconfig index 1a1dfcfafb..fbc05536e4 100644 --- a/configs/omap3_overo_defconfig +++ b/configs/omap3_overo_defconfig @@ -16,16 +16,18 @@ CONFIG_SYS_PROMPT="Overo # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x240000 CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set @@ -41,7 +43,9 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig index 8a2e0ae9da..f5aa8e6fcb 100644 --- a/configs/omap3_pandora_defconfig +++ b/configs/omap3_pandora_defconfig @@ -12,12 +12,12 @@ CONFIG_SYS_PROMPT="Pandora # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set @@ -25,6 +25,8 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/omap3_zoom1_defconfig b/configs/omap3_zoom1_defconfig index c6e292436c..20bbfeb97a 100644 --- a/configs/omap3_zoom1_defconfig +++ b/configs/omap3_zoom1_defconfig @@ -11,14 +11,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -32,6 +32,8 @@ CONFIG_CMD_MTDPARTS=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index b9503440d4..3d4f0cb10f 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -15,18 +15,20 @@ CONFIG_SPL=y # CONFIG_SPL_I2C_SUPPORT is not set CONFIG_SPL_OS_BOOT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/omap4_sdp4430_defconfig b/configs/omap4_sdp4430_defconfig index 04198e5d83..218cf35ec0 100644 --- a/configs/omap4_sdp4430_defconfig +++ b/configs/omap4_sdp4430_defconfig @@ -16,15 +16,16 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index d13d11c8b1..343125a167 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -13,16 +13,17 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -33,11 +34,13 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y -CONFIG_SCSI=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y +CONFIG_CMD_TCA642X=y CONFIG_MMC_OMAP_HS=y +CONFIG_SCSI=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_DWC3=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index d10c540f38..6323b07bb0 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -21,12 +21,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CRC32_VERIFY=y # CONFIG_CMD_EEPROM is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y # CONFIG_CMD_GPIO is not set +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DIAG=y CONFIG_CMD_UBI=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NAND=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000 CONFIG_SPI_FLASH=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index dd23beb27d..ccd9a50435 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -8,8 +8,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index eb08b310d7..d74bc77985 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -8,8 +8,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index 4423749ae3..4bfc5243dd 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -8,8 +8,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index b9dab54efd..f4511af293 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -12,6 +12,8 @@ CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="imx6ul-opos6uldev" CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttymxc0,115200" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_DEFAULT_FDT_FILE="imx6ul-opos6uldev.dtb" @@ -30,14 +32,14 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/origen_defconfig b/configs/origen_defconfig index 573c9e29a7..298e7a4943 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -12,12 +12,13 @@ CONFIG_SYS_PROMPT="ORIGEN # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/ot1200_defconfig b/configs/ot1200_defconfig index 8d40e52120..41ec12d1f6 100644 --- a/configs/ot1200_defconfig +++ b/configs/ot1200_defconfig @@ -10,11 +10,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -25,6 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_DM=y +CONFIG_CMD_PCA953X=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/ot1200_spl_defconfig b/configs/ot1200_spl_defconfig index 34331ca372..3d3f6b682a 100644 --- a/configs/ot1200_spl_defconfig +++ b/configs/ot1200_spl_defconfig @@ -18,11 +18,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -33,6 +33,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_DM=y +CONFIG_CMD_PCA953X=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig index 0dbcef951c..277f302b9b 100644 --- a/configs/p2371-0000_defconfig +++ b/configs/p2371-0000_defconfig @@ -9,16 +9,16 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2371-0000) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig index 4345fb070a..9d143c95dc 100644 --- a/configs/p2371-2180_defconfig +++ b/configs/p2371-2180_defconfig @@ -9,16 +9,17 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2371-2180) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig index a268f381bb..c8270c7035 100644 --- a/configs/p2571_defconfig +++ b/configs/p2571_defconfig @@ -9,16 +9,16 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra210 (P2571) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig index edf6ce4a93..c55fd6542a 100644 --- a/configs/p2771-0000-000_defconfig +++ b/configs/p2771-0000-000_defconfig @@ -9,13 +9,14 @@ CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-000) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig index c3870c38d6..193d1782de 100644 --- a/configs/p2771-0000-500_defconfig +++ b/configs/p2771-0000-500_defconfig @@ -9,13 +9,14 @@ CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-500) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index d0c2b7292a..c309a69816 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -10,10 +10,10 @@ CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y diff --git a/configs/pb1000_defconfig b/configs/pb1000_defconfig index a9c5ede046..45140380c9 100644 --- a/configs/pb1000_defconfig +++ b/configs/pb1000_defconfig @@ -7,10 +7,10 @@ CONFIG_SYS_PROMPT="Pb1x00 # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_RUN is not set # CONFIG_CMD_SAVEENV is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index 3e6121636d..e468de6d75 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -28,16 +28,17 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -54,6 +55,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index f921a9d0ec..432c7fdce2 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -28,16 +28,17 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -54,6 +55,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig index 201d2aeefa..05f88f66f2 100644 --- a/configs/pcm052_defconfig +++ b/configs/pcm052_defconfig @@ -12,10 +12,10 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index 8fa5bfbf1e..e1881f6e19 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -25,12 +25,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig index b84c3de7bf..f22bb49ee5 100644 --- a/configs/peach-pi_defconfig +++ b/configs/peach-pi_defconfig @@ -12,12 +12,12 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL=y CONFIG_SYS_PROMPT="Peach-Pi # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index a0f443ef47..082ba336e5 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -12,12 +12,12 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL=y CONFIG_SYS_PROMPT="Peach-Pit # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index aca3f46dd3..46add3657b 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -29,16 +29,18 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x240000 CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -53,8 +55,10 @@ CONFIG_CMD_DIAG=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig index a7e057499a..a1c3565895 100644 --- a/configs/pepper_defconfig +++ b/configs/pepper_defconfig @@ -23,11 +23,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -45,5 +45,6 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_NETDEVICES=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_FAT_WRITE=y CONFIG_OF_LIBFDT=y diff --git a/configs/pfla02_defconfig b/configs/pfla02_defconfig new file mode 100644 index 0000000000..bcd83edebb --- /dev/null +++ b/configs/pfla02_defconfig @@ -0,0 +1,55 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_PFLA02=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_CMD_HDMIDETECT=y +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL" +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL=y +CONFIG_SPL_DMA_SUPPORT=y +CONFIG_SPL_EXT_SUPPORT=y +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_UBI=y +CONFIG_ISO_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_PARTITION_UUIDS is not set +# CONFIG_SPL_PARTITION_UUIDS is not set +CONFIG_DM=y +CONFIG_MTD=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_NETDEVICES=y +CONFIG_FEC_MXC=y +CONFIG_DM_THERMAL=y +CONFIG_OF_LIBFDT=y diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig index 618d9839fd..70dc3f7a24 100644 --- a/configs/phycore-rk3288_defconfig +++ b/configs/phycore-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_PHYCORE_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-phycore-rdk" @@ -16,13 +16,13 @@ CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/pic32mzdask_defconfig b/configs/pic32mzdask_defconfig index 5d08a33ff2..a9ba13fc5c 100644 --- a/configs/pic32mzdask_defconfig +++ b/configs/pic32mzdask_defconfig @@ -11,14 +11,14 @@ CONFIG_SYS_PROMPT="dask # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_SAVEENV is not set CONFIG_LOOPW=y -CONFIG_CMD_MEMTEST=y CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_CMD_RARP=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index 19f8fc4b78..f42f895981 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -11,12 +11,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig index 02d990bf6b..114c397d2e 100644 --- a/configs/pico-imx7d_defconfig +++ b/configs/pico-imx7d_defconfig @@ -9,12 +9,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_CACHE=y diff --git a/configs/picosam9g45_defconfig b/configs/picosam9g45_defconfig index 28872ac5da..25bd4d4bb3 100644 --- a/configs/picosam9g45_defconfig +++ b/configs/picosam9g45_defconfig @@ -12,6 +12,8 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -23,11 +25,11 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/platinum_picon_defconfig b/configs/platinum_picon_defconfig index dba4cfb378..3a31f46537 100644 --- a/configs/platinum_picon_defconfig +++ b/configs/platinum_picon_defconfig @@ -22,12 +22,12 @@ CONFIG_SYS_PROMPT="picon > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/platinum_titanium_defconfig b/configs/platinum_titanium_defconfig index 93967ed50f..81f0cb6df1 100644 --- a/configs/platinum_titanium_defconfig +++ b/configs/platinum_titanium_defconfig @@ -22,12 +22,12 @@ CONFIG_SYS_PROMPT="titanium > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index b1ba074bb5..a5b970f85e 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -12,11 +12,11 @@ CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index a2cbb4c4e0..8db19a5345 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 " # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_CPUINFO is not set @@ -14,11 +16,11 @@ CONFIG_SYS_PROMPT="pm9261> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 7516c9552a..ce494042a3 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 " # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y @@ -13,11 +15,11 @@ CONFIG_SYS_PROMPT="u-boot-pm9263> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/pm9g45_defconfig b/configs/pm9g45_defconfig index 6834152e07..658c336419 100644 --- a/configs/pm9g45_defconfig +++ b/configs/pm9g45_defconfig @@ -4,6 +4,8 @@ CONFIG_TARGET_PM9G45=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="fbcon=rotate:3 console=tty0 console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,1664k(env),2M(linux)ro,-(root) rw rootfstype=jffs2" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y @@ -11,9 +13,9 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig index cfa2205e8c..1ad1852c74 100644 --- a/configs/popmetal-rk3288_defconfig +++ b/configs/popmetal-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_POPMETAL_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal" @@ -14,13 +14,13 @@ CONFIG_CONSOLE_MUX=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/porter_defconfig b/configs/porter_defconfig index 6fbcffae8e..c6d3644c1c 100644 --- a/configs/porter_defconfig +++ b/configs/porter_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig index 146d297f5c..e027f6d3da 100644 --- a/configs/portl2_defconfig +++ b/configs/portl2_defconfig @@ -15,9 +15,9 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 67d16159b0..366f2a917a 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -24,10 +24,10 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_BMP=y @@ -54,7 +54,6 @@ CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ9031=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 5877f93cb0..523e49bcec 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -35,14 +35,14 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -57,12 +57,14 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index f905f35631..c48b22efe2 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -11,10 +11,12 @@ CONFIG_BOOTDELAY=1 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_PCI=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y # CONFIG_CMD_HASH is not set diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index bda94ab460..3f7bbe42f4 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -18,6 +18,8 @@ CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_CPU_SUPPORT=y @@ -26,13 +28,13 @@ CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_PCI_SUPPORT=y CONFIG_SPL_PCH_SUPPORT=y CONFIG_SPL_RTC_SUPPORT=y -CONFIG_SPL_TIMER_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -57,6 +59,7 @@ CONFIG_SPL_SYSCON=y CONFIG_CPU=y CONFIG_DEBUG_UART_BASE=0x3f8 CONFIG_DEBUG_UART_CLOCK=1843200 +CONFIG_SPL_TIMER=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 068b1cd532..aba7f1ebb7 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -8,13 +8,16 @@ CONFIG_GENERATE_ACPI_TABLE=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -36,6 +39,7 @@ CONFIG_EFI_PARTITION=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CPU=y +CONFIG_NVME=y CONFIG_USB_STORAGE=y CONFIG_USB_KEYBOARD=y CONFIG_FRAMEBUFFER_SET_VESA_MODE=y diff --git a/configs/qemu-x86_efi_payload32_defconfig b/configs/qemu-x86_efi_payload32_defconfig index 5f1045a128..5c0f129b4a 100644 --- a/configs/qemu-x86_efi_payload32_defconfig +++ b/configs/qemu-x86_efi_payload32_defconfig @@ -5,13 +5,16 @@ CONFIG_SMP=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y diff --git a/configs/qemu-x86_efi_payload64_defconfig b/configs/qemu-x86_efi_payload64_defconfig index d76f7fd7eb..8a2e2433a8 100644 --- a/configs/qemu-x86_efi_payload64_defconfig +++ b/configs/qemu-x86_efi_payload64_defconfig @@ -5,14 +5,17 @@ CONFIG_SMP=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y diff --git a/configs/qemu_mips64_defconfig b/configs/qemu_mips64_defconfig index 6835cf1c5c..4262934939 100644 --- a/configs/qemu_mips64_defconfig +++ b/configs/qemu_mips64_defconfig @@ -16,3 +16,4 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_LZMA=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/qemu_mips64el_defconfig b/configs/qemu_mips64el_defconfig index 60bd6164fc..60278358a9 100644 --- a/configs/qemu_mips64el_defconfig +++ b/configs/qemu_mips64el_defconfig @@ -17,3 +17,4 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_LZMA=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/qemu_mips_defconfig b/configs/qemu_mips_defconfig index c6f08b4efb..cedb9060c5 100644 --- a/configs/qemu_mips_defconfig +++ b/configs/qemu_mips_defconfig @@ -14,3 +14,4 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_LZMA=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/qemu_mipsel_defconfig b/configs/qemu_mipsel_defconfig index b8c206971d..5bb84da5ae 100644 --- a/configs/qemu_mipsel_defconfig +++ b/configs/qemu_mipsel_defconfig @@ -15,3 +15,4 @@ CONFIG_CMD_FAT=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y CONFIG_LZMA=y +CONFIG_ENV_IS_IN_FLASH=y diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig index 4389a5152f..bf88dd76b5 100644 --- a/configs/r0p7734_defconfig +++ b/configs/r0p7734_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_R0P7734=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC3,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,9 +14,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 31b9cc4f5b..9bd36dddd6 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -2,7 +2,10 @@ CONFIG_SH=y CONFIG_TARGET_R2DPLUS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" CONFIG_CMD_IDE=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/r7780mp_defconfig b/configs/r7780mp_defconfig index a46954d3c3..e4b8fb4bd8 100644 --- a/configs/r7780mp_defconfig +++ b/configs/r7780mp_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_R7780MP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_BOOTD is not set @@ -11,10 +13,12 @@ CONFIG_BOOTDELAY=3 # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_IDE=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_PCI=y +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/r8a7795_salvator-x_defconfig b/configs/r8a7795_salvator-x_defconfig index 127a4ed31f..f517e0e7ab 100644 --- a/configs/r8a7795_salvator-x_defconfig +++ b/configs/r8a7795_salvator-x_defconfig @@ -3,20 +3,23 @@ CONFIG_ARCH_RMOBILE=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_RCAR_GEN3=y CONFIG_TARGET_SALVATOR_X=y -CONFIG_ENV_IS_IN_MMC=y CONFIG_DEFAULT_DEVICE_TREE="r8a7795-salvator-x" CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 rw root=/dev/nfs nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" CONFIG_DEFAULT_FDT_FILE="r8a7795-salvator-x.dtb" CONFIG_VERSION_VARIABLE=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_OF_CONTROL=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y diff --git a/configs/r8a7795_ulcb_defconfig b/configs/r8a7795_ulcb_defconfig index 3eacc4d2d5..8b6b03ba32 100644 --- a/configs/r8a7795_ulcb_defconfig +++ b/configs/r8a7795_ulcb_defconfig @@ -5,6 +5,8 @@ CONFIG_RCAR_GEN3=y CONFIG_TARGET_ULCB=y CONFIG_DEFAULT_DEVICE_TREE="r8a7795-h3ulcb" CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 rw root=/dev/nfs nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" CONFIG_DEFAULT_FDT_FILE="r8a7795-h3ulcb.dtb" CONFIG_VERSION_VARIABLE=y CONFIG_CMD_BOOTZ=y @@ -15,6 +17,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y diff --git a/configs/r8a7796_salvator-x_defconfig b/configs/r8a7796_salvator-x_defconfig index 2cf54b3938..247f8785e3 100644 --- a/configs/r8a7796_salvator-x_defconfig +++ b/configs/r8a7796_salvator-x_defconfig @@ -4,20 +4,23 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_RCAR_GEN3=y CONFIG_R8A7796=y CONFIG_TARGET_SALVATOR_X=y -CONFIG_ENV_IS_IN_MMC=y CONFIG_DEFAULT_DEVICE_TREE="r8a7796-salvator-x" CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 rw root=/dev/nfs nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" CONFIG_DEFAULT_FDT_FILE="r8a7796-salvator-x.dtb" CONFIG_VERSION_VARIABLE=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_OF_CONTROL=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y diff --git a/configs/r8a7796_ulcb_defconfig b/configs/r8a7796_ulcb_defconfig index 33bcc0cf42..bc995deea0 100644 --- a/configs/r8a7796_ulcb_defconfig +++ b/configs/r8a7796_ulcb_defconfig @@ -6,6 +6,8 @@ CONFIG_R8A7796=y CONFIG_TARGET_ULCB=y CONFIG_DEFAULT_DEVICE_TREE="r8a7796-m3ulcb" CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200 rw root=/dev/nfs nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" CONFIG_DEFAULT_FDT_FILE="r8a7796-m3ulcb.dtb" CONFIG_VERSION_VARIABLE=y CONFIG_CMD_BOOTZ=y @@ -16,6 +18,7 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_MMC=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y CONFIG_SH_SDHI=y diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index a6deb7dd14..10b9e9901b 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -32,14 +32,14 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -53,12 +53,14 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index 04b265336a..4d5ae95358 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -11,11 +11,11 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_DM=y diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index cca855cfdf..fba7fbacb0 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_ROCK2=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square" @@ -13,12 +13,12 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/rock_defconfig b/configs/rock_defconfig index 2ad6a6c521..5fd80217de 100644 --- a/configs/rock_defconfig +++ b/configs/rock_defconfig @@ -4,7 +4,8 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3188=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y +CONFIG_TPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_ROCK=y CONFIG_SPL_STACK_R_ADDR=0x60080000 CONFIG_DEFAULT_DEVICE_TREE="rk3188-radxarock" @@ -14,10 +15,10 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 # CONFIG_CMD_IMLS is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y @@ -49,5 +50,6 @@ CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_SYSRESET=y CONFIG_SPL_TINY_MEMSET=y +CONFIG_TPL_TINY_MEMSET=y CONFIG_CMD_DHRYSTONE=y CONFIG_ERRNO_STR=y diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index e0bf3e14e0..63d1e4042d 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -11,10 +11,10 @@ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig index 0b7be9e17e..343cb197a1 100644 --- a/configs/rpi_3_32b_defconfig +++ b/configs/rpi_3_32b_defconfig @@ -12,10 +12,10 @@ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig index dd7dc56ff4..6c9f2e32b5 100644 --- a/configs/rpi_3_defconfig +++ b/configs/rpi_3_defconfig @@ -12,10 +12,10 @@ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 8f23158899..6b3cec5ce0 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -11,10 +11,10 @@ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_BCM2835=y diff --git a/configs/rsk7203_defconfig b/configs/rsk7203_defconfig index f7b99f4842..1aa4676583 100644 --- a/configs/rsk7203_defconfig +++ b/configs/rsk7203_defconfig @@ -1,5 +1,7 @@ CONFIG_SH=y CONFIG_TARGET_RSK7203=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set @@ -11,9 +13,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/rsk7264_defconfig b/configs/rsk7264_defconfig index f1999b53e5..9a1db162fa 100644 --- a/configs/rsk7264_defconfig +++ b/configs/rsk7264_defconfig @@ -1,6 +1,8 @@ CONFIG_SH=y CONFIG_TARGET_RSK7264=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC3,115200" # CONFIG_CMD_SETEXPR is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SCIF_CONSOLE=y diff --git a/configs/rsk7269_defconfig b/configs/rsk7269_defconfig index 4a07af6180..4a78cb6a21 100644 --- a/configs/rsk7269_defconfig +++ b/configs/rsk7269_defconfig @@ -1,6 +1,8 @@ CONFIG_SH=y CONFIG_TARGET_RSK7269=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC7,115200" # CONFIG_CMD_SETEXPR is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SCIF_CONSOLE=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index fb4153c31b..4a00178f65 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -36,14 +36,14 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -58,12 +58,14 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/s32v234evb_defconfig b/configs/s32v234evb_defconfig index be4b716e9e..e2271522d2 100644 --- a/configs/s32v234evb_defconfig +++ b/configs/s32v234evb_defconfig @@ -4,6 +4,8 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_MALLOC_F=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/s32v234evb/s32v234evb.cfg" CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyLF0 root=/dev/ram rw" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_CMD_BOOTZ=y CONFIG_OF_LIBFDT=y diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 9c66a1826d..90f815d8aa 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -3,18 +3,22 @@ CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_S5P_GONI=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock8 rootfstype=ext4 ${console} ${meminfo} ${mtdparts}" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Goni # " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y -CONFIG_CMD_DFU=y +CONFIG_CMD_ONENAND=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index 021e6c5102..16352ad7a0 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -3,6 +3,8 @@ CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_EXYNOS4=y CONFIG_TARGET_S5PC210_UNIVERSAL=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="Please use defined boot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y @@ -10,13 +12,14 @@ CONFIG_SYS_PROMPT="Universal # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/sagem_f@st1704_ram_defconfig b/configs/sagem_f@st1704_ram_defconfig index 8b5d7f4d65..a482f8f695 100644 --- a/configs/sagem_f@st1704_ram_defconfig +++ b/configs/sagem_f@st1704_ram_defconfig @@ -24,9 +24,9 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/sama5d2_ptc_nandflash_defconfig b/configs/sama5d2_ptc_nandflash_defconfig index f139a5e584..817d6ae19e 100644 --- a/configs/sama5d2_ptc_nandflash_defconfig +++ b/configs/sama5d2_ptc_nandflash_defconfig @@ -9,16 +9,18 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,57600 earlyprintk mtdparts=atmel_nand:6M(bootstrap)ro, 6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d2_ptc_spiflash_defconfig b/configs/sama5d2_ptc_spiflash_defconfig index 419f29b2e0..5ac759ee53 100644 --- a/configs/sama5d2_ptc_spiflash_defconfig +++ b/configs/sama5d2_ptc_spiflash_defconfig @@ -10,16 +10,18 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,57600 earlyprintk mtdparts=atmel_nand:6M(bootstrap)ro, 6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_FAT=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index f69cb56574..2bfd61b08f 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_SPL_SEPARATE_BSS=y @@ -23,13 +25,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index 8b9c0ccd2a..07fb71b769 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -15,19 +15,21 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d36ek_cmp_mmc_defconfig b/configs/sama5d36ek_cmp_mmc_defconfig index 4e8624b1a0..6cc9bb64c6 100644 --- a/configs/sama5d36ek_cmp_mmc_defconfig +++ b/configs/sama5d36ek_cmp_mmc_defconfig @@ -8,6 +8,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -15,12 +17,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig index 6264c88b80..6c24a0d22f 100644 --- a/configs/sama5d36ek_cmp_nandflash_defconfig +++ b/configs/sama5d36ek_cmp_nandflash_defconfig @@ -8,6 +8,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -15,12 +17,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d36ek_cmp_spiflash_defconfig b/configs/sama5d36ek_cmp_spiflash_defconfig index b1edd61c05..168bf1961e 100644 --- a/configs/sama5d36ek_cmp_spiflash_defconfig +++ b/configs/sama5d36ek_cmp_spiflash_defconfig @@ -8,6 +8,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -15,12 +17,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig index 775941885a..e8a9ee9d2d 100644 --- a/configs/sama5d3_xplained_mmc_defconfig +++ b/configs/sama5d3_xplained_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_SPL_SEPARATE_BSS=y @@ -23,13 +25,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig index ea488a28c6..f3c338c0ac 100644 --- a/configs/sama5d3_xplained_nandflash_defconfig +++ b/configs/sama5d3_xplained_nandflash_defconfig @@ -14,19 +14,21 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index 0fe0b94723..32b4c422aa 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -24,13 +26,13 @@ CONFIG_SPL_SEPARATE_BSS=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index dc743270c1..c1ddfd03d6 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -21,13 +23,13 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index aa35252e03..823cdcce7d 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -15,20 +15,22 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index 8fa2e25094..09da2e0855 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_SPL_SEPARATE_BSS=y @@ -23,13 +25,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index b2079f0009..5ac5d08527 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -14,19 +14,21 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index b171c7969d..131d0e5b9d 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -15,19 +15,21 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index d3626d0069..395a01760f 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -16,6 +16,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_ENV_IS_IN_FAT=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -25,13 +27,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 6477e013f2..9eab7f712b 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -14,6 +14,8 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -22,13 +24,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index 5f7f61a951..f25ca9cfdb 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -15,19 +15,21 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index fd0b952e1d..070262fe86 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -26,20 +26,22 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_ENV_CALLBACK=y CONFIG_CMD_ENV_FLAGS=y -CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y -CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y -CONFIG_CMD_IDE=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_READ=y +CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TFTPSRV=y CONFIG_CMD_RARP=y @@ -61,6 +63,7 @@ CONFIG_CMD_TPM_TEST=y CONFIG_CMD_CBFS=y CONFIG_CMD_CRAMFS=y CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_MTDPARTS=y CONFIG_MAC_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_OF_CONTROL=y @@ -68,9 +71,7 @@ CONFIG_OF_LIVE=y CONFIG_OF_HOSTFILE=y CONFIG_NETCONSOLE=y CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y CONFIG_DEVRES=y CONFIG_DEBUG_DEVRES=y CONFIG_ADC=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index 3d21662599..1eecf1eb9d 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -22,19 +22,20 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y -CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y -CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TFTPSRV=y CONFIG_CMD_RARP=y @@ -58,9 +59,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_HOSTFILE=y CONFIG_NETCONSOLE=y CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y CONFIG_DEVRES=y CONFIG_DEBUG_DEVRES=y CONFIG_ADC=y diff --git a/configs/sandbox_noblk_defconfig b/configs/sandbox_noblk_defconfig index 0b82439d33..612aed50c5 100644 --- a/configs/sandbox_noblk_defconfig +++ b/configs/sandbox_noblk_defconfig @@ -24,21 +24,22 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_ENV_CALLBACK=y CONFIG_CMD_ENV_FLAGS=y -CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y -CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y -CONFIG_CMD_IDE=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y +CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TFTPSRV=y CONFIG_CMD_RARP=y @@ -72,9 +73,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_HOSTFILE=y CONFIG_NETCONSOLE=y CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y CONFIG_DEVRES=y CONFIG_DEBUG_DEVRES=y CONFIG_ADC=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 09e078ec51..d1ccdfe9d3 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -33,20 +33,21 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_ENV_CALLBACK=y CONFIG_CMD_ENV_FLAGS=y -CONFIG_CMD_MD5SUM=y CONFIG_LOOPW=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MX_CYCLIC=y -CONFIG_CMD_MEMINFO=y CONFIG_CMD_DEMO=y -CONFIG_CMD_IDE=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_IDE=y +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TFTPSRV=y CONFIG_CMD_RARP=y diff --git a/configs/sansa_fuze_plus_defconfig b/configs/sansa_fuze_plus_defconfig index 0da8d524e5..5de4e163b4 100644 --- a/configs/sansa_fuze_plus_defconfig +++ b/configs/sansa_fuze_plus_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VIDEO=y CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 " # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_VERSION_VARIABLE=y @@ -18,9 +20,9 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/sbc8349_PCI_33_defconfig b/configs/sbc8349_PCI_33_defconfig index 80789f08ad..2f0991895c 100644 --- a/configs/sbc8349_PCI_33_defconfig +++ b/configs/sbc8349_PCI_33_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="PCI_33M" CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sbc8349_PCI_66_defconfig b/configs/sbc8349_PCI_66_defconfig index abfedbea58..880f6da08e 100644 --- a/configs/sbc8349_PCI_66_defconfig +++ b/configs/sbc8349_PCI_66_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_EXTRA_OPTIONS="PCI_66M" CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sbc8548_PCI_33_PCIE_defconfig b/configs/sbc8548_PCI_33_PCIE_defconfig index f351271f7d..21d172d04c 100644 --- a/configs/sbc8548_PCI_33_PCIE_defconfig +++ b/configs/sbc8548_PCI_33_PCIE_defconfig @@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sbc8548_PCI_33_defconfig b/configs/sbc8548_PCI_33_defconfig index c30a1d22bc..ac4a37b34b 100644 --- a/configs/sbc8548_PCI_33_defconfig +++ b/configs/sbc8548_PCI_33_defconfig @@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sbc8548_PCI_66_PCIE_defconfig b/configs/sbc8548_PCI_66_PCIE_defconfig index edd030951f..826d888f0a 100644 --- a/configs/sbc8548_PCI_66_PCIE_defconfig +++ b/configs/sbc8548_PCI_66_PCIE_defconfig @@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sbc8548_PCI_66_defconfig b/configs/sbc8548_PCI_66_defconfig index 8d9a47cc64..77ec0c81ba 100644 --- a/configs/sbc8548_PCI_66_defconfig +++ b/configs/sbc8548_PCI_66_defconfig @@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=10 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sbc8641d_defconfig b/configs/sbc8641d_defconfig index 7174e0059f..6bb2ed6290 100644 --- a/configs/sbc8641d_defconfig +++ b/configs/sbc8641d_defconfig @@ -7,6 +7,7 @@ CONFIG_BOOTDELAY=10 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_DOS_PARTITION=y diff --git a/configs/sc_sps_1_defconfig b/configs/sc_sps_1_defconfig index 44c5f51b8d..3abed053fd 100644 --- a/configs/sc_sps_1_defconfig +++ b/configs/sc_sps_1_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y @@ -14,9 +16,9 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 14d196ad51..2a3360e1d1 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -9,12 +9,12 @@ CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig index 060f463c51..be321c6869 100644 --- a/configs/secomx6quq7_defconfig +++ b/configs/secomx6quq7_defconfig @@ -12,8 +12,8 @@ CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig index 537fee75c4..37a85ccf44 100644 --- a/configs/sfr_nb4-ser_ram_defconfig +++ b/configs/sfr_nb4-ser_ram_defconfig @@ -25,8 +25,8 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set # CONFIG_CMD_MISC is not set diff --git a/configs/sh7752evb_defconfig b/configs/sh7752evb_defconfig index 1449e30351..71512eb64f 100644 --- a/configs/sh7752evb_defconfig +++ b/configs/sh7752evb_defconfig @@ -3,6 +3,8 @@ CONFIG_SH_32BIT=y CONFIG_TARGET_SH7752EVB=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC2,115200 root=/dev/nfs ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -13,11 +15,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_MD5SUM=y -# CONFIG_CMD_LOADB is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set @@ -29,9 +32,9 @@ CONFIG_CMD_EXT2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_MMC=y -CONFIG_PHYLIB=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7753evb_defconfig b/configs/sh7753evb_defconfig index 7ba7e0c1ec..d2085c17d1 100644 --- a/configs/sh7753evb_defconfig +++ b/configs/sh7753evb_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_SH7753EVB=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC2,115200 root=/dev/nfs ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,11 +14,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_MD5SUM=y -# CONFIG_CMD_LOADB is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set @@ -28,9 +31,9 @@ CONFIG_CMD_EXT2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_MMC=y -CONFIG_PHYLIB=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7757lcr_defconfig b/configs/sh7757lcr_defconfig index a1ffd2a91e..fda7cb1aff 100644 --- a/configs/sh7757lcr_defconfig +++ b/configs/sh7757lcr_defconfig @@ -3,6 +3,8 @@ CONFIG_SH_32BIT=y CONFIG_TARGET_SH7757LCR=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC2,115200 root=/dev/nfs ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -13,11 +15,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_MD5SUM=y -# CONFIG_CMD_LOADB is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADB is not set CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set @@ -29,8 +32,8 @@ CONFIG_CMD_EXT2=y CONFIG_MAC_PARTITION=y CONFIG_DOS_PARTITION=y CONFIG_MMC=y -CONFIG_PHYLIB=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y CONFIG_SCIF_CONSOLE=y CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/configs/sh7763rdp_defconfig b/configs/sh7763rdp_defconfig index d5348f828a..1e96c98745 100644 --- a/configs/sh7763rdp_defconfig +++ b/configs/sh7763rdp_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_SH7763RDP=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC2,115200 root=1f01" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,9 +14,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/sh7785lcr_32bit_defconfig b/configs/sh7785lcr_32bit_defconfig index 675c4eb678..aea5dae973 100644 --- a/configs/sh7785lcr_32bit_defconfig +++ b/configs/sh7785lcr_32bit_defconfig @@ -3,6 +3,8 @@ CONFIG_SH_32BIT=y CONFIG_TARGET_SH7785LCR=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC1,115200 root=/dev/nfs ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -12,10 +14,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set +CONFIG_CMD_PCI=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/sh7785lcr_defconfig b/configs/sh7785lcr_defconfig index d118fd4f5d..a7b4171005 100644 --- a/configs/sh7785lcr_defconfig +++ b/configs/sh7785lcr_defconfig @@ -2,6 +2,8 @@ CONFIG_SH=y CONFIG_TARGET_SH7785LCR=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC1,115200 root=/dev/nfs ip=dhcp" CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -11,10 +13,12 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set +CONFIG_CMD_PCI=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/sheep-rk3368_defconfig b/configs/sheep-rk3368_defconfig index be00fade7e..da6b93a28c 100644 --- a/configs/sheep-rk3368_defconfig +++ b/configs/sheep-rk3368_defconfig @@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 CONFIG_ROCKCHIP_RK3368=y CONFIG_DEFAULT_DEVICE_TREE="rk3368-sheep" CONFIG_DEBUG_UART=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 95a9ec574d..6a92b4450d 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -8,8 +8,8 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_IDE=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_IDE=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y diff --git a/configs/shmin_defconfig b/configs/shmin_defconfig index 249582f495..0c5fe39ed7 100644 --- a/configs/shmin_defconfig +++ b/configs/shmin_defconfig @@ -1,5 +1,7 @@ CONFIG_SH=y CONFIG_TARGET_SHMIN=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttySC0,115200" CONFIG_VERSION_VARIABLE=y # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set @@ -11,9 +13,10 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set +CONFIG_CMD_SDRAM=y # CONFIG_CMD_ECHO is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set diff --git a/configs/silk_defconfig b/configs/silk_defconfig index f25eb9dcb4..be0e9a2c74 100644 --- a/configs/silk_defconfig +++ b/configs/silk_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 1db2acc7e7..22d9b566da 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb" +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" CONFIG_ENV_IS_IN_NAND=y @@ -24,11 +25,11 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 356600f005..15bc524849 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -15,12 +15,12 @@ CONFIG_CONSOLE_MUX=y CONFIG_SPL=y CONFIG_SYS_PROMPT="SMDK5250 # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index 6a2ea20526..23219ab468 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -13,12 +13,12 @@ CONFIG_CONSOLE_MUX=y CONFIG_SPL=y CONFIG_SYS_PROMPT="SMDK5420 # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index ef8510d47d..76cefedc1d 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -5,10 +5,13 @@ CONFIG_IDENT_STRING=" for SMDKC100" CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" CONFIG_ENV_IS_IN_ONENAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/mtdblock5 ubi.mtd=4 rootfstype=cramfs console=ttySAC0,115200n8 mem=128M mtdparts=s3c-onenand:256k(bootloader),128k@0x40000(params),3m@0x60000(kernel),16m@0x360000(test),-(UBI)" CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="SMDKC100 # " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_ONENAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y diff --git a/configs/smdkv310_defconfig b/configs/smdkv310_defconfig index 5e9f181e93..ae374985eb 100644 --- a/configs/smdkv310_defconfig +++ b/configs/smdkv310_defconfig @@ -9,10 +9,10 @@ CONFIG_SYS_PROMPT="SMDKV310 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set CONFIG_CMD_MII=y diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 0c78b4717f..e262fd9fc0 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -5,25 +5,28 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 ip=any" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Snapper> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_CMD_PCA953X=y # CONFIG_MMC is not set CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index f524a66fa3..ce2b3e4e1c 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -5,24 +5,27 @@ CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 ip=any" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_NAND=y +CONFIG_CMD_USB=y # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_FAT=y +CONFIG_CMD_PCA953X=y # CONFIG_MMC is not set CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index f365efc806..47cbd8bd1e 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -16,11 +16,11 @@ CONFIG_SYS_PROMPT="sniper # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/snow_defconfig b/configs/snow_defconfig index 5a197d1060..4870e0c95e 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -15,12 +15,12 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL=y CONFIG_SYS_PROMPT="snow # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig index 7db657a633..9c7b0ea45d 100644 --- a/configs/socfpga_arria10_defconfig +++ b/configs/socfpga_arria10_defconfig @@ -5,6 +5,8 @@ CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y CONFIG_IDENT_STRING="socfpga_arria10" CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb" CONFIG_SPL=y CONFIG_SPL_FPGA_SUPPORT=y @@ -13,8 +15,8 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig index fc60f1d171..ada18eabe9 100644 --- a/configs/socfpga_arria5_defconfig +++ b/configs/socfpga_arria5_defconfig @@ -20,15 +20,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig index e69d768b79..2238f11194 100644 --- a/configs/socfpga_cyclone5_defconfig +++ b/configs/socfpga_cyclone5_defconfig @@ -20,15 +20,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig index fbb8f1208f..03e05c1bb4 100644 --- a/configs/socfpga_de0_nano_soc_defconfig +++ b/configs/socfpga_de0_nano_soc_defconfig @@ -20,15 +20,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_de10_nano_defconfig b/configs/socfpga_de10_nano_defconfig index 5de9c172db..26addc3c4d 100644 --- a/configs/socfpga_de10_nano_defconfig +++ b/configs/socfpga_de10_nano_defconfig @@ -20,14 +20,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_de1_soc_defconfig b/configs/socfpga_de1_soc_defconfig index 0fe0cad273..c2781caea2 100644 --- a/configs/socfpga_de1_soc_defconfig +++ b/configs/socfpga_de1_soc_defconfig @@ -24,11 +24,11 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig index 7d3e653339..a5f804f366 100644 --- a/configs/socfpga_is1_defconfig +++ b/configs/socfpga_is1_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_is1" CONFIG_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y @@ -19,10 +21,10 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_mcvevk_defconfig b/configs/socfpga_mcvevk_defconfig index 3e0469ff14..a09f8169fc 100644 --- a/configs/socfpga_mcvevk_defconfig +++ b/configs/socfpga_mcvevk_defconfig @@ -6,6 +6,8 @@ CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk" CONFIG_FIT=y CONFIG_ENV_IS_IN_MMC=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y @@ -19,15 +21,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_sockit_defconfig b/configs/socfpga_sockit_defconfig index d8efb6f5ef..678a8c3a1a 100644 --- a/configs/socfpga_sockit_defconfig +++ b/configs/socfpga_sockit_defconfig @@ -20,15 +20,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig index a338bbd64d..92a1b0a5eb 100644 --- a/configs/socfpga_socrates_defconfig +++ b/configs/socfpga_socrates_defconfig @@ -20,15 +20,15 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig index 65fbc9fa4e..cb88c18ed3 100644 --- a/configs/socfpga_sr1500_defconfig +++ b/configs/socfpga_sr1500_defconfig @@ -24,11 +24,11 @@ CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index 359c6c14b2..6e9a3bed45 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -7,6 +7,8 @@ CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga" CONFIG_FIT=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y @@ -21,15 +23,15 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_EEPROM=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index d5294f33a8..741842088e 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -11,8 +11,11 @@ CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_HUSH_PARSER=y -CONFIG_CMD_NAND=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig index 4c60d03772..fdb83e1f30 100644 --- a/configs/som-db5800-som-6867_defconfig +++ b/configs/som-db5800-som-6867_defconfig @@ -13,16 +13,19 @@ CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/spear300_defconfig b/configs/spear300_defconfig index 4814aa8194..a11a3c086c 100644 --- a/configs/spear300_defconfig +++ b/configs/spear300_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR300" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear300_nand_defconfig b/configs/spear300_nand_defconfig index 42a7434fc8..dce9c7625e 100644 --- a/configs/spear300_nand_defconfig +++ b/configs/spear300_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR300" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear300_usbtty_defconfig b/configs/spear300_usbtty_defconfig index c5d476102b..248549937e 100644 --- a/configs/spear300_usbtty_defconfig +++ b/configs/spear300_usbtty_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,USBTTY" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear300_usbtty_nand_defconfig b/configs/spear300_usbtty_nand_defconfig index 035a592160..4705498fa7 100644 --- a/configs/spear300_usbtty_nand_defconfig +++ b/configs/spear300_usbtty_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR300=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,USBTTY,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR300,USBTTY" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_defconfig b/configs/spear310_defconfig index 2a2efd99aa..f7fa2e4cdf 100644 --- a/configs/spear310_defconfig +++ b/configs/spear310_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR310" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear310_nand_defconfig b/configs/spear310_nand_defconfig index f38f8b49cb..331dbb6afe 100644 --- a/configs/spear310_nand_defconfig +++ b/configs/spear310_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR310" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_pnor_defconfig b/configs/spear310_pnor_defconfig index 6aad21ce0a..b650485c00 100644 --- a/configs/spear310_pnor_defconfig +++ b/configs/spear310_pnor_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,FLASH_PNOR" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear310_usbtty_defconfig b/configs/spear310_usbtty_defconfig index 5de447b9d8..09a7155b55 100644 --- a/configs/spear310_usbtty_defconfig +++ b/configs/spear310_usbtty_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear310_usbtty_nand_defconfig b/configs/spear310_usbtty_nand_defconfig index ed2b7b0e65..b1f0f5b1f2 100644 --- a/configs/spear310_usbtty_nand_defconfig +++ b/configs/spear310_usbtty_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR310=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear310_usbtty_pnor_defconfig b/configs/spear310_usbtty_pnor_defconfig index e595e7bcc0..cd25daedc0 100644 --- a/configs/spear310_usbtty_pnor_defconfig +++ b/configs/spear310_usbtty_pnor_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR310,USBTTY,FLASH_PNOR" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear320_defconfig b/configs/spear320_defconfig index abe0e8d06b..40077d9843 100644 --- a/configs/spear320_defconfig +++ b/configs/spear320_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR320" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear320_nand_defconfig b/configs/spear320_nand_defconfig index afecca3614..ac6100e323 100644 --- a/configs/spear320_nand_defconfig +++ b/configs/spear320_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR320" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_pnor_defconfig b/configs/spear320_pnor_defconfig index ba5a247e02..20bea9cd68 100644 --- a/configs/spear320_pnor_defconfig +++ b/configs/spear320_pnor_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,FLASH_PNOR" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear320_usbtty_defconfig b/configs/spear320_usbtty_defconfig index cf6b3c9745..c415d78942 100644 --- a/configs/spear320_usbtty_defconfig +++ b/configs/spear320_usbtty_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear320_usbtty_nand_defconfig b/configs/spear320_usbtty_nand_defconfig index f9ab39f095..a00bd4c9e7 100644 --- a/configs/spear320_usbtty_nand_defconfig +++ b/configs/spear320_usbtty_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR320=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear320_usbtty_pnor_defconfig b/configs/spear320_usbtty_pnor_defconfig index 8aae75caeb..d6bb6623d7 100644 --- a/configs/spear320_usbtty_pnor_defconfig +++ b/configs/spear320_usbtty_pnor_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR320,USBTTY,FLASH_PNOR" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear600_defconfig b/configs/spear600_defconfig index f12d03e5ca..5493cf2ef2 100644 --- a/configs/spear600_defconfig +++ b/configs/spear600_defconfig @@ -4,13 +4,15 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR600" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear600_nand_defconfig b/configs/spear600_nand_defconfig index 4d348d404a..43f35131fb 100644 --- a/configs/spear600_nand_defconfig +++ b/configs/spear600_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR600" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spear600_usbtty_defconfig b/configs/spear600_usbtty_defconfig index c923582f02..e0ff475685 100644 --- a/configs/spear600_usbtty_defconfig +++ b/configs/spear600_usbtty_defconfig @@ -4,10 +4,12 @@ CONFIG_IDENT_STRING="-SPEAr" CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY" CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/spear600_usbtty_nand_defconfig b/configs/spear600_usbtty_nand_defconfig index ffbd4013de..7945f05455 100644 --- a/configs/spear600_usbtty_nand_defconfig +++ b/configs/spear600_usbtty_nand_defconfig @@ -1,13 +1,15 @@ CONFIG_ARM=y CONFIG_TARGET_SPEAR600=y CONFIG_IDENT_STRING="-SPEAr" -CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY,NAND" +CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=-1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -15,6 +17,7 @@ CONFIG_CMD_PING=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y +CONFIG_NAND=y CONFIG_NETDEVICES=y CONFIG_PHY_GIGE=y CONFIG_ETH_DESIGNWARE=y diff --git a/configs/spring_defconfig b/configs/spring_defconfig index 9384d9e8f9..fcbb923858 100644 --- a/configs/spring_defconfig +++ b/configs/spring_defconfig @@ -15,12 +15,12 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SPL=y CONFIG_SYS_PROMPT="spring # " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/stih410-b2260_defconfig b/configs/stih410-b2260_defconfig index e29c29bc6f..998602c3b2 100644 --- a/configs/stih410-b2260_defconfig +++ b/configs/stih410-b2260_defconfig @@ -5,6 +5,8 @@ CONFIG_DEFAULT_DEVICE_TREE="stih410-b2260" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_ENV_IS_NOWHERE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SYS_PROMPT="stih410-b2260 => " # CONFIG_CMD_IMLS is not set diff --git a/configs/stm32f429-discovery_defconfig b/configs/stm32f429-discovery_defconfig index f16ca3753f..bff1b1b529 100644 --- a/configs/stm32f429-discovery_defconfig +++ b/configs/stm32f429-discovery_defconfig @@ -4,6 +4,8 @@ CONFIG_STM32F4=y CONFIG_TARGET_STM32F429_DISCOVERY=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index 439b796282..261b180870 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -6,6 +6,8 @@ CONFIG_TARGET_STM32F746_DISCO=y CONFIG_DEFAULT_DEVICE_TREE="stm32f746-disco" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y @@ -15,8 +17,8 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " # CONFIG_CMD_IMLS is not set -CONFIG_CMD_SF=y # CONFIG_CMD_FPGA is not set +CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/stout_defconfig b/configs/stout_defconfig index ec2bec9326..0d4ff5ced4 100644 --- a/configs/stout_defconfig +++ b/configs/stout_defconfig @@ -9,10 +9,11 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/strider_con_defconfig b/configs/strider_con_defconfig index 68a38e0ba9..9c92fa5d08 100644 --- a/configs/strider_con_defconfig +++ b/configs/strider_con_defconfig @@ -16,9 +16,10 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_FPGAD=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/strider_con_dp_defconfig b/configs/strider_con_dp_defconfig index 3adae55b79..030f3f579c 100644 --- a/configs/strider_con_dp_defconfig +++ b/configs/strider_con_dp_defconfig @@ -16,9 +16,10 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_FPGAD=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/strider_cpu_defconfig b/configs/strider_cpu_defconfig index 5d620c575e..22bd3fa149 100644 --- a/configs/strider_cpu_defconfig +++ b/configs/strider_cpu_defconfig @@ -16,9 +16,10 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_FPGAD=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/strider_cpu_dp_defconfig b/configs/strider_cpu_dp_defconfig index 7bba84ac99..6530134939 100644 --- a/configs/strider_cpu_dp_defconfig +++ b/configs/strider_cpu_dp_defconfig @@ -16,9 +16,10 @@ CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y CONFIG_CMD_FPGAD=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig index e6c7e60597..77725ccc6d 100644 --- a/configs/tao3530_defconfig +++ b/configs/tao3530_defconfig @@ -12,11 +12,11 @@ CONFIG_SYS_PROMPT="TAO-3530 # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y @@ -26,6 +26,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_MTDPARTS=y CONFIG_MMC_OMAP_HS=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index 09cd284eda..6fecaf89e8 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -16,6 +16,8 @@ CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y @@ -25,13 +27,13 @@ CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/tb100_defconfig b/configs/tb100_defconfig index 5b3c84bd5c..9dd7ff2146 100644 --- a/configs/tb100_defconfig +++ b/configs/tb100_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_CLK_FREQ=500000000 CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="[tb100]:~# " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index a6783e036c..0e4bbe0110 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -16,13 +16,14 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_SATA=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index f6ab7a254b..6aae968f80 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -11,13 +11,13 @@ CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/tec_defconfig b/configs/tec_defconfig index fdaa507908..46a2086eff 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -11,11 +11,11 @@ CONFIG_SYS_PROMPT="Tegra20 (TEC) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig index c51a72c386..31b187d970 100644 --- a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig @@ -21,12 +21,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/theadorable-x86-conga-qa3-e3845_defconfig b/configs/theadorable-x86-conga-qa3-e3845_defconfig index 12d5a6f420..569e750407 100644 --- a/configs/theadorable-x86-conga-qa3-e3845_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845_defconfig @@ -20,12 +20,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig index c49d06b4a0..8ccb957047 100644 --- a/configs/theadorable-x86-dfi-bt700_defconfig +++ b/configs/theadorable-x86-dfi-bt700_defconfig @@ -19,12 +19,13 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig index 375b8e9aa7..a39497984b 100644 --- a/configs/theadorable_debug_defconfig +++ b/configs/theadorable_debug_defconfig @@ -22,11 +22,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/theadorable_defconfig b/configs/theadorable_defconfig index d89d860173..0639f81328 100644 --- a/configs/theadorable_defconfig +++ b/configs/theadorable_defconfig @@ -22,8 +22,8 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_SF=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 07793c0fc6..9a8c73b868 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -32,14 +32,14 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\ CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -53,12 +53,14 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DFU_NAND=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y CONFIG_USB_MUSB_GADGET=y diff --git a/configs/thunderx_88xx_defconfig b/configs/thunderx_88xx_defconfig index 2c7a5a6d9e..7e7cd8e1ae 100644 --- a/configs/thunderx_88xx_defconfig +++ b/configs/thunderx_88xx_defconfig @@ -5,6 +5,8 @@ CONFIG_DEFAULT_DEVICE_TREE="thunderx-88xx" CONFIG_DEBUG_UART=y CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e024000000 debug maxcpus=48 rootwait rw root=/dev/sda2 coherent_pool=16M" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index 9d4be2af1d..eceec341fa 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -13,9 +13,10 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_FAT_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="dm8168-evm" CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -25,11 +26,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y @@ -41,5 +42,7 @@ CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_OMAP24XX=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y +CONFIG_OMAP3_SPI=y # CONFIG_USE_PRIVATE_LIBGCC is not set diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index be937998e6..44963e6260 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_ROCKCHIP_RK3288=y -CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y +CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y CONFIG_TARGET_TINKER_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker" @@ -15,13 +15,13 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/titanium_defconfig b/configs/titanium_defconfig index 85d1fab2df..15306d0653 100644 --- a/configs/titanium_defconfig +++ b/configs/titanium_defconfig @@ -10,12 +10,12 @@ CONFIG_SYS_PROMPT="Titanium > " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index 1873791e79..db60f51f36 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -13,13 +13,14 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="zynq-uboot> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index db859a7b0b..db88c32c0b 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -13,13 +13,14 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="zynq-uboot> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 93e0292bd5..35557e7afd 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -13,13 +13,14 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="zynq-uboot> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4=y diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig index 2469d0b542..51c7a325ca 100644 --- a/configs/tplink_wdr4300_defconfig +++ b/configs/tplink_wdr4300_defconfig @@ -5,6 +5,8 @@ CONFIG_BOARD_TPLINK_WDR4300=y CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300" CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" CONFIG_VERSION_VARIABLE=y CONFIG_DISPLAY_CPUINFO=y CONFIG_BOARD_EARLY_INIT_F=y @@ -13,10 +15,10 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y # CONFIG_ISO_PARTITION is not set diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig index 50cc1fe2a7..d2bf7e36eb 100644 --- a/configs/tqma6dl_mba6_mmc_defconfig +++ b/configs/tqma6dl_mba6_mmc_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig index 40e4987d47..c9c9a74eef 100644 --- a/configs/tqma6dl_mba6_spi_defconfig +++ b/configs/tqma6dl_mba6_spi_defconfig @@ -15,12 +15,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index faa608aff3..f850d790a5 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -13,12 +13,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index a9e400bb29..8a5c09e52a 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index 09cfdcc533..7015903f26 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index 8ef0bf0f9d..85127276e3 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -15,12 +15,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig index 2150537352..3b81bc7599 100644 --- a/configs/tqma6s_wru4_mmc_defconfig +++ b/configs/tqma6s_wru4_mmc_defconfig @@ -18,10 +18,10 @@ CONFIG_AUTOBOOT_STOP_STR_SHA256="36a9e7f1c95b82ffb99743e0c5c4ce95d83c9a430aac59f CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y -CONFIG_CMD_MMC=y +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index 16ac27fb95..bcc73d4fa2 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -6,6 +6,8 @@ CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="Please use defined boot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y @@ -13,13 +15,14 @@ CONFIG_SYS_PROMPT="Trats2 # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 0f2445bdf4..3f0c59baad 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -5,6 +5,8 @@ CONFIG_TARGET_TRATS=y CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="Please use defined boot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_HUSH_PARSER=y @@ -12,13 +14,14 @@ CONFIG_SYS_PROMPT="Trats # " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y # CONFIG_CMD_NFS is not set diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index de42b4d763..18da9f63e7 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -12,11 +12,11 @@ CONFIG_SYS_PROMPT="OMAP3 Tricorder # " # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index c7cb0f77f7..b355d53f75 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -12,11 +12,11 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_LOCK_UNLOCK=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index a904e4b4dd..230aecc45e 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -11,13 +11,14 @@ CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index 6012499339..f68a1a0d05 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -18,10 +18,11 @@ CONFIG_SPL=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_CACHE=y diff --git a/configs/twister_defconfig b/configs/twister_defconfig index 61132ee8ba..2ee4936fe6 100644 --- a/configs/twister_defconfig +++ b/configs/twister_defconfig @@ -11,13 +11,16 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="twister => " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_SPL=y +CONFIG_CMD_SPL_NAND_OFS=0x00800000 +CONFIG_CMD_SPL_WRITE_SIZE=0x400 CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -27,6 +30,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_UBI=y CONFIG_MMC_OMAP_HS=y +CONFIG_NAND=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig index 0e32fb82ab..f2a0e80c7d 100644 --- a/configs/udoo_defconfig +++ b/configs/udoo_defconfig @@ -18,8 +18,8 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set -CONFIG_CMD_MMC=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y CONFIG_CMD_SATA=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig index 70b32b7832..02897eb2b4 100644 --- a/configs/udoo_neo_defconfig +++ b/configs/udoo_neo_defconfig @@ -17,8 +17,8 @@ CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_EXT_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index c1a81289f7..be0ae70f1a 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -16,12 +16,12 @@ CONFIG_CMD_CONFIG=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/uniphier_pro4_defconfig b/configs/uniphier_pro4_defconfig index 980cd4abbe..5ba8879af6 100644 --- a/configs/uniphier_pro4_defconfig +++ b/configs/uniphier_pro4_defconfig @@ -15,12 +15,12 @@ CONFIG_CMD_CONFIG=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/uniphier_pxs2_ld6b_defconfig b/configs/uniphier_pxs2_ld6b_defconfig index 3499ca39e5..22c21548b6 100644 --- a/configs/uniphier_pxs2_ld6b_defconfig +++ b/configs/uniphier_pxs2_ld6b_defconfig @@ -16,12 +16,12 @@ CONFIG_CMD_CONFIG=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/uniphier_sld3_defconfig b/configs/uniphier_sld3_defconfig index 6340b6a40d..35f8421238 100644 --- a/configs/uniphier_sld3_defconfig +++ b/configs/uniphier_sld3_defconfig @@ -16,12 +16,12 @@ CONFIG_CMD_CONFIG=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index d71b8b7a1d..066685f7b0 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -11,12 +11,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_CONFIG=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/usb_a9263_dataflash_defconfig b/configs/usb_a9263_dataflash_defconfig index 9cc51ec0aa..5178c6b49d 100644 --- a/configs/usb_a9263_dataflash_defconfig +++ b/configs/usb_a9263_dataflash_defconfig @@ -6,17 +6,19 @@ CONFIG_DEFAULT_DEVICE_TREE="usb_a9263" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock1 mtdparts=mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2) rw rootfstype=jffs2" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_NAND=y CONFIG_CMD_SF=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig index 4ae7045e8f..94b4d06a01 100644 --- a/configs/usbarmory_defconfig +++ b/configs/usbarmory_defconfig @@ -6,10 +6,10 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_MMC=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y +CONFIG_CMD_FUSE=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_FUSE=y # CONFIG_CMD_SETEXPR is not set CONFIG_USB=y CONFIG_USB_STORAGE=y diff --git a/configs/vct_platinum_onenand_defconfig b/configs/vct_platinum_onenand_defconfig index 4c1615c537..d7c5a3cd12 100644 --- a/configs/vct_platinum_onenand_defconfig +++ b/configs/vct_platinum_onenand_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_PROMPT="$ " CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y +CONFIG_CMD_ONENAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index 20c0863b7b..a3620841da 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -12,9 +12,10 @@ CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set +CONFIG_CMD_ONENAND=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/vct_platinumavc_onenand_defconfig b/configs/vct_platinumavc_onenand_defconfig index dfb8f04ce7..77aa4dd01c 100644 --- a/configs/vct_platinumavc_onenand_defconfig +++ b/configs/vct_platinumavc_onenand_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_PROMPT="$ " CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y +CONFIG_CMD_ONENAND=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set CONFIG_CMD_DHCP=y diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index de7b500f80..fe1c8a79ef 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -12,9 +12,10 @@ CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set +CONFIG_CMD_ONENAND=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/vct_premium_onenand_defconfig b/configs/vct_premium_onenand_defconfig index ba43e0e00a..71b69114ad 100644 --- a/configs/vct_premium_onenand_defconfig +++ b/configs/vct_premium_onenand_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_PROMPT="$ " CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y +CONFIG_CMD_ONENAND=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index cc9998f391..41e5a3df7f 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -12,9 +12,10 @@ CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_FLASH is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set +CONFIG_CMD_ONENAND=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SOURCE is not set # CONFIG_CMD_SETEXPR is not set diff --git a/configs/ve8313_defconfig b/configs/ve8313_defconfig index 9a9d593f01..8a23beec2a 100644 --- a/configs/ve8313_defconfig +++ b/configs/ve8313_defconfig @@ -8,6 +8,7 @@ CONFIG_BOOTDELAY=6 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index e4a48ec08b..392af0939e 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -9,16 +9,16 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SYS_PROMPT="Tegra124 (Venice2) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_EXT4_WRITE=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index baefcd0e8d..55e1b12f44 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -9,10 +9,10 @@ CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set CONFIG_CMD_PMIC=y diff --git a/configs/vexpress_aemv8a_dram_defconfig b/configs/vexpress_aemv8a_dram_defconfig index 60eea037b5..ce3c2eeaa3 100644 --- a/configs/vexpress_aemv8a_dram_defconfig +++ b/configs/vexpress_aemv8a_dram_defconfig @@ -5,6 +5,8 @@ CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0 earlyprintk=pl011,0x1c090000 debug user_debug=31 androidboot.hardware=fvpbase root=/dev/vda2 rw rootwait loglevel=9" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="VExpress64# " @@ -15,9 +17,9 @@ CONFIG_SYS_PROMPT="VExpress64# " # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y -# CONFIG_CMD_LOADS is not set CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index d7414d44d8..bdfba736d1 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -5,6 +5,8 @@ CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlyprintk=pl011,0x7ff80000 debug user_debug=31 androidboot.hardware=juno loglevel=9" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="VExpress64# " @@ -15,9 +17,9 @@ CONFIG_SYS_PROMPT="VExpress64# " # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y -# CONFIG_CMD_LOADS is not set CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index b92e87fd2c..2fd1f9b2f0 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -5,6 +5,8 @@ CONFIG_IDENT_STRING=" vexpress_aemv8a" CONFIG_DISTRO_DEFAULTS=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=1 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0 earlyprintk=pl011,0x1c090000 debug user_debug=31 loglevel=9" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="VExpress64# " @@ -15,9 +17,9 @@ CONFIG_SYS_PROMPT="VExpress64# " # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y -# CONFIG_CMD_LOADS is not set CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_FPGA is not set +# CONFIG_CMD_LOADS is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/vexpress_ca15_tc2_defconfig b/configs/vexpress_ca15_tc2_defconfig index 3dfe2e82ed..e71be4cae3 100644 --- a/configs/vexpress_ca15_tc2_defconfig +++ b/configs/vexpress_ca15_tc2_defconfig @@ -11,10 +11,10 @@ CONFIG_ENV_IS_IN_FLASH=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/vexpress_ca5x2_defconfig b/configs/vexpress_ca5x2_defconfig index 507290bb69..3027336e7e 100644 --- a/configs/vexpress_ca5x2_defconfig +++ b/configs/vexpress_ca5x2_defconfig @@ -10,10 +10,10 @@ CONFIG_ENV_IS_IN_FLASH=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig index 851f034478..557dcbf6fd 100644 --- a/configs/vexpress_ca9x4_defconfig +++ b/configs/vexpress_ca9x4_defconfig @@ -10,10 +10,10 @@ CONFIG_ENV_IS_IN_FLASH=y # CONFIG_CMD_XIMG is not set # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_FPGA is not set # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y -# CONFIG_CMD_FPGA is not set # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NFS is not set diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig index 5f2fefda71..30a035cf52 100644 --- a/configs/vf610twr_defconfig +++ b/configs/vf610twr_defconfig @@ -9,11 +9,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND_TRIMFFS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig index 2454f32479..af86c346eb 100644 --- a/configs/vf610twr_nand_defconfig +++ b/configs/vf610twr_nand_defconfig @@ -9,11 +9,11 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_I2C=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND_TRIMFFS=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/vinco_defconfig b/configs/vinco_defconfig index cb2040e50f..1d1abb3b14 100644 --- a/configs/vinco_defconfig +++ b/configs/vinco_defconfig @@ -4,6 +4,8 @@ CONFIG_TARGET_VINCO=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656" # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y @@ -11,13 +13,13 @@ CONFIG_SYS_PROMPT="vinco => " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPT=y +# CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index c54cfe34e2..e041b7a732 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -10,11 +10,12 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/vme8349_defconfig b/configs/vme8349_defconfig index b1769933a0..cc782bf860 100644 --- a/configs/vme8349_defconfig +++ b/configs/vme8349_defconfig @@ -7,6 +7,8 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTDELAY=6 CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y +CONFIG_CMD_TSI148=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MII=y CONFIG_CMD_PING=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index fdc135bbe4..6d3e5eb265 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -22,11 +22,11 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_DM=y diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index db1c7cb46d..99fe800317 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -13,12 +13,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_CACHE=y diff --git a/configs/warp7_secure_defconfig b/configs/warp7_secure_defconfig index b80e1a6e8d..8beda72cd8 100644 --- a/configs/warp7_secure_defconfig +++ b/configs/warp7_secure_defconfig @@ -14,12 +14,12 @@ CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y diff --git a/configs/warp_defconfig b/configs/warp_defconfig index c99ad88153..4b415b35df 100644 --- a/configs/warp_defconfig +++ b/configs/warp_defconfig @@ -9,14 +9,14 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set # CONFIG_CMD_NET is not set # CONFIG_CMD_NFS is not set diff --git a/configs/woodburn_defconfig b/configs/woodburn_defconfig index 5e4a73c8b1..4535483d3b 100644 --- a/configs/woodburn_defconfig +++ b/configs/woodburn_defconfig @@ -6,11 +6,11 @@ CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="woodburn U-Boot > " +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/woodburn_sd_defconfig b/configs/woodburn_sd_defconfig index 458e97cacc..4d9425893a 100644 --- a/configs/woodburn_sd_defconfig +++ b/configs/woodburn_sd_defconfig @@ -16,11 +16,11 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="woodburn U-Boot > " +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig index 8e7f6c864d..1fc26b235d 100644 --- a/configs/work_92105_defconfig +++ b/configs/work_92105_defconfig @@ -5,8 +5,11 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_CMD_HD44760=y +CONFIG_CMD_MAX6957=y CONFIG_ENV_IS_IN_NAND=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS2,115200n8" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y @@ -17,10 +20,10 @@ CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_EEPROM=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_NAND=y CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/x600_defconfig b/configs/x600_defconfig index 98b18806b5..73ddd039fa 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -19,11 +19,12 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_LOOPW=y -CONFIG_CMD_NAND=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_SAVES=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig index 5a49db280b..50c97328e9 100644 --- a/configs/xfi3_defconfig +++ b/configs/xfi3_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VIDEO=y CONFIG_ENV_IS_NOWHERE=y CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 " # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_VERSION_VARIABLE=y @@ -17,9 +19,9 @@ CONFIG_SPL=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig index 44f71ac29f..f72ae81d96 100644 --- a/configs/xilinx_zynqmp_ep_defconfig +++ b/configs/xilinx_zynqmp_ep_defconfig @@ -21,19 +21,20 @@ CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_CONSOLE is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_THOR_DOWNLOAD=y # CONFIG_CMD_EDITENV is not set # CONFIG_CMD_ENV_EXISTS is not set CONFIG_CMD_UNZIP=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y # CONFIG_CMD_LOADB is not set # CONFIG_CMD_LOADS is not set -CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_LOCK_UNLOCK=y -CONFIG_CMD_I2C=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y # CONFIG_CMD_ITEST is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y @@ -47,8 +48,6 @@ CONFIG_OF_EMBED=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y CONFIG_SATA_CEVA=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y @@ -59,12 +58,15 @@ CONFIG_SYS_I2C_CADENCE=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_NAND=y CONFIG_NAND_ARASAN=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=25000000 diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index dacdee35f9..d3e0d83251 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -20,15 +20,16 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig index 14dc5bac8a..55232dbc8b 100644 --- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig @@ -21,15 +21,16 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -48,6 +49,7 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y # CONFIG_MMC is not set CONFIG_DM_MMC=y +CONFIG_NAND=y CONFIG_NAND_ARASAN=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig index b7ed38c7e2..ca3f15b564 100644 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig @@ -20,8 +20,8 @@ CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig index 17101394e7..773f12350b 100644 --- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig @@ -20,8 +20,8 @@ CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index 072155d2a9..24ccdb50e0 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -20,16 +20,17 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -40,13 +41,12 @@ CONFIG_OF_EMBED=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y CONFIG_SATA_CEVA=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_CMD_PCA953X=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y @@ -58,6 +58,8 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 7db5a8e3c4..93c32e21f0 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -20,16 +20,17 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_OS_BOOT=y CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_EEPROM=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_UNZIP=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -40,13 +41,12 @@ CONFIG_OF_EMBED=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y CONFIG_SATA_CEVA=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_CMD_PCA953X=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y @@ -58,6 +58,8 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y CONFIG_PHY_GIGE=y CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y CONFIG_DEBUG_UART_ZYNQ=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig index 7b1f2b5f14..d714c674f7 100644 --- a/configs/xpedite517x_defconfig +++ b/configs/xpedite517x_defconfig @@ -9,8 +9,9 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -19,6 +20,7 @@ CONFIG_CMD_SNTP=y CONFIG_CMD_DATE=y CONFIG_CMD_JFFS2=y CONFIG_CMD_IRQ=y +CONFIG_CMD_PCA953X=y CONFIG_DS4510=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/xpedite520x_defconfig b/configs/xpedite520x_defconfig index 003a8e996f..b04063ae32 100644 --- a/configs/xpedite520x_defconfig +++ b/configs/xpedite520x_defconfig @@ -10,8 +10,9 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y -CONFIG_CMD_NAND=y CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -21,6 +22,7 @@ CONFIG_CMD_DATE=y # CONFIG_CMD_HASH is not set CONFIG_CMD_JFFS2=y # CONFIG_CMD_IRQ is not set +CONFIG_CMD_PCA953X=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y diff --git a/configs/xpedite537x_defconfig b/configs/xpedite537x_defconfig index 9d17e005a9..657fdcc7fd 100644 --- a/configs/xpedite537x_defconfig +++ b/configs/xpedite537x_defconfig @@ -8,9 +8,11 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y +CONFIG_CMD_REGINFO=y CONFIG_CMD_ASKENV=y CONFIG_CMD_EEPROM=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y @@ -21,6 +23,7 @@ CONFIG_CMD_DATE=y CONFIG_CMD_JFFS2=y # CONFIG_CMD_IRQ is not set CONFIG_SYS_FSL_DDR2=y +CONFIG_CMD_PCA953X=y CONFIG_DS4510=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y diff --git a/configs/xpedite550x_defconfig b/configs/xpedite550x_defconfig index af56226abe..9b2eb18d72 100644 --- a/configs/xpedite550x_defconfig +++ b/configs/xpedite550x_defconfig @@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=3 CONFIG_HUSH_PARSER=y CONFIG_CMD_ASKENV=y CONFIG_CMD_I2C=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y @@ -21,6 +22,7 @@ CONFIG_CMD_DATE=y # CONFIG_CMD_HASH is not set CONFIG_CMD_JFFS2=y # CONFIG_CMD_IRQ is not set +CONFIG_CMD_PCA953X=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y diff --git a/configs/xpress_defconfig b/configs/xpress_defconfig index 6718cd392e..249ceab30f 100644 --- a/configs/xpress_defconfig +++ b/configs/xpress_defconfig @@ -10,8 +10,8 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/xpress_spl_defconfig b/configs/xpress_spl_defconfig index 817a2240d7..eeee73233b 100644 --- a/configs/xpress_spl_defconfig +++ b/configs/xpress_spl_defconfig @@ -20,8 +20,8 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_MEMTEST=y -CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig index e52e62b201..f28c05f156 100644 --- a/configs/xtfpga_defconfig +++ b/configs/xtfpga_defconfig @@ -10,6 +10,7 @@ CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press <SPACE> to stop\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y +CONFIG_CMD_SAVES=y CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y CONFIG_CMD_DIAG=y diff --git a/configs/zc5202_defconfig b/configs/zc5202_defconfig index d61ed777be..bfd51fd12b 100644 --- a/configs/zc5202_defconfig +++ b/configs/zc5202_defconfig @@ -19,10 +19,11 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPI_FLASH=y diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig index 501898ac43..444c089bab 100644 --- a/configs/zc5601_defconfig +++ b/configs/zc5601_defconfig @@ -19,10 +19,10 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_SPI_FLASH=y diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig index 6da257c671..1567aab2da 100644 --- a/configs/zipitz2_defconfig +++ b/configs/zipitz2_defconfig @@ -1,6 +1,8 @@ CONFIG_ARM=y CONFIG_TARGET_ZIPITZ2=y CONFIG_ENV_IS_IN_FLASH=y +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=tty0 console=ttyS2,115200 fbcon=rotate:3" # CONFIG_CONSOLE_MUX is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index ec8eafb4db..11d4dba0e5 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -12,16 +12,17 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index f5155b2678..167ab3473e 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -9,15 +9,16 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig index b550912222..6a9977b059 100644 --- a/configs/zynq_z_turn_defconfig +++ b/configs/zynq_z_turn_defconfig @@ -13,12 +13,13 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index b850af923b..49b6edc240 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -14,18 +14,19 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 35722e9952..d457ca7dbf 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -13,18 +13,19 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 9023b2e324..fafe60e6a7 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -14,13 +14,13 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 740c032ce5..f77e914db1 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -15,12 +15,12 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set -CONFIG_CMD_NAND_LOCK_UNLOCK=y CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_NAND_LOCK_UNLOCK=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y @@ -30,5 +30,6 @@ CONFIG_CMD_CACHE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y # CONFIG_MMC is not set +CONFIG_NAND=y CONFIG_NAND_ZYNQ=y CONFIG_ZYNQ_GEM=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 762d475de6..2ae98daa52 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -12,16 +12,17 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_USB=y +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 439236139e..fca2b125bc 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -14,18 +14,19 @@ CONFIG_SPL_OS_BOOT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_IMLS is not set +CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y CONFIG_CMD_FPGA_LOADMK=y CONFIG_CMD_FPGA_LOADP=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_DHCP=y diff --git a/disk/part.c b/disk/part.c index e640a55163..c67fdacc79 100644 --- a/disk/part.c +++ b/disk/part.c @@ -132,6 +132,7 @@ void dev_print (struct blk_desc *dev_desc) case IF_TYPE_SD: case IF_TYPE_MMC: case IF_TYPE_USB: + case IF_TYPE_NVME: printf ("Vendor: %s Rev: %s Prod: %s\n", dev_desc->vendor, dev_desc->revision, @@ -263,7 +264,10 @@ static void print_part_header(const char *type, struct blk_desc *dev_desc) puts ("MMC"); break; case IF_TYPE_HOST: - puts("HOST"); + puts ("HOST"); + break; + case IF_TYPE_NVME: + puts ("NVMe"); break; default: puts ("UNKNOWN"); @@ -451,7 +455,7 @@ int blk_get_device_part_str(const char *ifname, const char *dev_part_str, /* If no dev_part_str, use bootdevice environment variable */ if (!dev_part_str || !strlen(dev_part_str) || !strcmp(dev_part_str, "-")) - dev_part_str = getenv("bootdevice"); + dev_part_str = env_get("bootdevice"); /* If still no dev_part_str, it's an error */ if (!dev_part_str) { diff --git a/disk/part_amiga.c b/disk/part_amiga.c index 25fe56ce42..f8dae008d7 100644 --- a/disk/part_amiga.c +++ b/disk/part_amiga.c @@ -132,7 +132,7 @@ struct rigid_disk_block *get_rdisk(struct blk_desc *dev_desc) int limit; char *s; - s = getenv("amiga_scanlimit"); + s = env_get("amiga_scanlimit"); if (s) limit = simple_strtoul(s, NULL, 10); else @@ -172,7 +172,7 @@ struct bootcode_block *get_bootcode(struct blk_desc *dev_desc) int limit; char *s; - s = getenv("amiga_scanlimit"); + s = env_get("amiga_scanlimit"); if (s) limit = simple_strtoul(s, NULL, 10); else diff --git a/doc/README.enetaddr b/doc/README.enetaddr index 50e4899787..f926485986 100644 --- a/doc/README.enetaddr +++ b/doc/README.enetaddr @@ -84,7 +84,7 @@ uchar enetaddr[6]; eth_parse_enetaddr(addr, enetaddr); /* enetaddr now equals { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 } */ - * int eth_getenv_enetaddr(char *name, uchar *enetaddr); + * int eth_env_get_enetaddr(char *name, uchar *enetaddr); Look up an environment variable and convert the stored address. If the address is valid, then the function returns 1. Otherwise, the function returns 0. In @@ -92,18 +92,18 @@ all cases, the enetaddr memory is initialized. If the env var is not found, then it is set to all zeros. The common function is_valid_ethaddr() is used to determine address validity. uchar enetaddr[6]; -if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { +if (!eth_env_get_enetaddr("ethaddr", enetaddr)) { /* "ethaddr" is not set in the environment */ ... try and setup "ethaddr" in the env ... } /* enetaddr is now set to the value stored in the ethaddr env var */ - * int eth_setenv_enetaddr(char *name, const uchar *enetaddr); + * int eth_env_set_enetaddr(char *name, const uchar *enetaddr); Store the MAC address into the named environment variable. The return value is -the same as the setenv() function. +the same as the env_set() function. uchar enetaddr[6] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }; -eth_setenv_enetaddr("ethaddr", enetaddr); +eth_env_set_enetaddr("ethaddr", enetaddr); /* the "ethaddr" env var should now be set to "00:11:22:33:44:55" */ * the %pM format modifier diff --git a/doc/README.nvme b/doc/README.nvme new file mode 100644 index 0000000000..3afa912a58 --- /dev/null +++ b/doc/README.nvme @@ -0,0 +1,86 @@ +# +# Copyright (C) 2017 NXP Semiconductors +# Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +What is NVMe +============ + +NVM Express (NVMe) is a register level interface that allows host software to +communicate with a non-volatile memory subsystem. This interface is optimized +for enterprise and client solid state drives, typically attached to the PCI +express interface. It is a scalable host controller interface designed to +address the needs of enterprise and client systems that utilize PCI express +based solid state drives (SSD). The interface provides optimized command +submission and completion paths. It includes support for parallel operation by +supporting up to 64K I/O queues with up to 64K commands per I/O queue. + +The device is comprised of some number of controllers, where each controller +is comprised of some number of namespaces, where each namespace is comprised +of some number of logical blocks. A namespace is a quantity of non-volatile +memory that is formatted into logical blocks. An NVMe namespace is equivalent +to a SCSI LUN. Each namespace is operated as an independent "device". + +How it works +------------ +There is an NVMe uclass driver (driver name "nvme"), an NVMe host controller +driver (driver name "nvme") and an NVMe namespace block driver (driver name +"nvme-blk"). The host controller driver is supposed to probe the hardware and +do necessary initialization to put the controller into a ready state at which +it is able to scan all available namespaces attached to it. Scanning namespace +is triggered by the NVMe uclass driver and the actual work is done in the NVMe +namespace block driver. + +Status +------ +It only support basic block read/write functions in the NVMe driver. + +Config options +-------------- +CONFIG_NVME Enable NVMe device support +CONFIG_CMD_NVME Enable basic NVMe commands + +Usage in U-Boot +--------------- +To use an NVMe hard disk from U-Boot shell, a 'nvme scan' command needs to +be executed for all NVMe hard disks attached to the NVMe controller to be +identified. + +To list all of the NVMe hard disks, try: + + => nvme list + Device 0: Vendor: 0x8086 Rev: 8DV10131 Prod: CVFT535600LS400BGN + Type: Hard Disk + Capacity: 381554.0 MB = 372.6 GB (781422768 x 512) + +and print out detailed information for controller and namespaces via: + + => nvme info + +Raw block read/write to can be done via the 'nvme read/write' commands: + + => nvme read a0000000 0 11000 + + => tftp 80000000 /tftpboot/kernel.itb + => nvme write 80000000 0 11000 + +Of course, file system command can be used on the NVMe hard disk as well: + + => fatls nvme 0:1 + 32376967 kernel.itb + 22929408 100m + + 2 file(s), 0 dir(s) + + => fatload nvme 0:1 a0000000 /kernel.itb + => bootm a0000000 + +Testing NVMe with QEMU x86 +-------------------------- +QEMU supports NVMe emulation and we can test NVMe driver with QEMU x86 running +U-Boot. Please see README.x86 for how to build u-boot.rom image for QEMU x86. + +Example command line to call QEMU x86 below with emulated NVMe device: +$ ./qemu-system-i386 -drive file=nvme.img,if=none,id=drv0 -device nvme,drive=drv0,serial=QEMUNVME0001 -bios u-boot.rom diff --git a/doc/README.rockchip b/doc/README.rockchip index dbeb8be6c0..12fec38139 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -130,7 +130,7 @@ load a second-level bootloader(ie. U-BOOT) as soon as it returns to bootrom. Therefore RK3288 has another loading sequence like RK3036. The option of U-Boot is controlled with this setting in U-Boot: - #define CONFIG_ROCKCHIP_SPL_BACK_TO_BROM + #define CONFIG_SPL_ROCKCHIP_BACK_TO_BROM You can create the image via the following operations: diff --git a/doc/README.x86 b/doc/README.x86 index 8025485cf1..c542a6965c 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -792,11 +792,7 @@ command. You can also bake this behaviour into your build by hard-coding the environment variables if you add this to minnowmax.h: -#undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTARGS \ - "root=/dev/sda2 ro" #define CONFIG_BOOTCOMMAND \ "ext2load scsi 0:2 03000000 /boot/vmlinuz-3.13.0-58-generic; " \ "ext2load scsi 0:2 04000000 /boot/initrd.img-3.13.0-58-generic; " \ @@ -805,6 +801,10 @@ environment variables if you add this to minnowmax.h: #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS "boot=zboot 03000000 0 04000000 ${filesize}" +and change CONFIG_BOOTARGS value in configs/minnowmax_defconfig to: + +CONFIG_BOOTARGS="root=/dev/sda2 ro" + Test with SeaBIOS ----------------- SeaBIOS [14] is an open source implementation of a 16-bit x86 BIOS. It can run diff --git a/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt new file mode 100644 index 0000000000..8e7357d53d --- /dev/null +++ b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt @@ -0,0 +1,67 @@ +RK3368 dynamic memory controller driver +======================================= + +The RK3368 DMC (dynamic memory controller) driver supports setup/initialisation +during TPL using configuration data from the DTS (i.e. OF_PLATDATA), based on +the following key configuration data: + (a) a target-frequency (i.e. operating point) for the memory operation + (b) a speed-bin (as defined in JESD-79) for the DDR3 used in hardware + (c) a memory-schedule (i.e. mapping from physical addresses to the address + pins of the memory bus) + +Required properties +------------------- + +- compatible: "rockchip,rk3368-dmc" +- reg + protocol controller (PCTL) address and PHY controller (DDRPHY) address +- rockchip,ddr-speed-bin + the DDR3 device's speed-bin (as specified according to JESD-79) + DDR3_800D (5-5-5) + DDR3_800E (6-6-6) + DDR3_1066E (6-6-6) + DDR3_1066F (7-7-7) + DDR3_1066G (8-8-8) + DDR3_1333F (7-7-7) + DDR3_1333G (8-8-8) + DDR3_1333H (9-9-9) + DDR3_1333J (10-10-10) + DDR3_1600G (8-8-8) + DDR3_1600H (9-9-9) + DDR3_1600J (10-10-10) + DDR3_1600K (11-11-11) + DDR3_1866J (10-10-10) + DDR3_1866K (11-11-11) + DDR3_1866L (12-12-12) + DDR3_1866M (13-13-13) + DDR3_2133K (11-11-11) + DDR3_2133L (12-12-12) + DDR3_2133M (13-13-13) + DDR3_2133N (14-14-14) +- rockchip,ddr-frequency: + target DDR clock frequency in Hz (not all frequencies may be supported, + as there's some cooperation from the clock-driver required) +- rockchip,memory-schedule: + controls the decoding of physical addresses to DRAM addressing (i.e. how + the physical address maps onto the address pins/chip-select of the device) + DMC_MSCH_CBDR: column -> bank -> device -> row + DMC_MSCH_CBRD: column -> band -> row -> device + DMC_MSCH_CRBD: column -> row -> band -> device + +Example (for DDR3-1600K and 800MHz) +----------------------------------- + + #include <dt-bindings/memory/rk3368-dmc.h> + + dmc: dmc@ff610000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3368-dmc"; + reg = <0 0xff610000 0 0x400 + 0 0xff620000 0 0x400>; + }; + + &dmc { + rockchip,ddr-speed-bin = <DDR3_1600K>; + rockchip,ddr-frequency = <800000000>; + rockchip,memory-schedule = <DMC_MSCH_CBRD>; + }; diff --git a/drivers/Kconfig b/drivers/Kconfig index 2e03133c43..613e60235d 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -50,6 +50,8 @@ source "drivers/mtd/Kconfig" source "drivers/net/Kconfig" +source "drivers/nvme/Kconfig" + source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index e4a9cb4195..dab5c182c2 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -2,33 +2,35 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_$(SPL_TPL_)DM) += core/ -obj-$(CONFIG_$(SPL_)CLK) += clk/ -obj-$(CONFIG_$(SPL_)LED) += led/ -obj-$(CONFIG_$(SPL_)PHY) += phy/ -obj-$(CONFIG_$(SPL_)PINCTRL) += pinctrl/ -obj-$(CONFIG_$(SPL_)RAM) += ram/ +obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ +obj-$(CONFIG_$(SPL_TPL_)DM) += core/ +obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ +obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ +obj-$(CONFIG_$(SPL_TPL_)LED) += led/ +obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/ +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/ +obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ +obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ +obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ +obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ +obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/ +obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ +obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ +ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/ obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/ -obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/ obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ -obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ -obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ -obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ -obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ -obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/ obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ -obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ obj-$(CONFIG_SPL_UBI) += mtd/ubispl/ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ @@ -37,7 +39,6 @@ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/ obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/ -obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ @@ -49,18 +50,13 @@ obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/ obj-$(CONFIG_SPL_MMC_SUPPORT) += block/ obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/ + +endif endif ifdef CONFIG_TPL_BUILD -obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/ -obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/ -obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/ obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ -obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/ -obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/ -obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/ -obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/ endif @@ -78,6 +74,7 @@ obj-y += firmware/ obj-$(CONFIG_FPGA) += fpga/ obj-y += misc/ obj-$(CONFIG_MMC) += mmc/ +obj-$(CONFIG_NVME) += nvme/ obj-y += pcmcia/ obj-y += dfu/ obj-$(CONFIG_X86) += pch/ @@ -87,7 +84,6 @@ obj-y += scsi/ obj-y += sound/ obj-y += spmi/ obj-y += sysreset/ -obj-y += timer/ obj-y += tpm/ obj-y += video/ obj-y += watchdog/ diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c index 23f131b7ad..a3737badec 100644 --- a/drivers/block/blk-uclass.c +++ b/drivers/block/blk-uclass.c @@ -22,6 +22,7 @@ static const char *if_typename_str[IF_TYPE_COUNT] = { [IF_TYPE_SATA] = "sata", [IF_TYPE_HOST] = "host", [IF_TYPE_SYSTEMACE] = "ace", + [IF_TYPE_NVME] = "nvme", }; static enum uclass_id if_type_uclass_id[IF_TYPE_COUNT] = { @@ -34,6 +35,7 @@ static enum uclass_id if_type_uclass_id[IF_TYPE_COUNT] = { [IF_TYPE_SD] = UCLASS_INVALID, [IF_TYPE_SATA] = UCLASS_AHCI, [IF_TYPE_HOST] = UCLASS_ROOT, + [IF_TYPE_NVME] = UCLASS_NVME, [IF_TYPE_SYSTEMACE] = UCLASS_INVALID, }; diff --git a/drivers/bootcount/bootcount_env.c b/drivers/bootcount/bootcount_env.c index 2d6e8db126..c3618d3a59 100644 --- a/drivers/bootcount/bootcount_env.c +++ b/drivers/bootcount/bootcount_env.c @@ -6,24 +6,25 @@ */ #include <common.h> +#include <environment.h> void bootcount_store(ulong a) { - int upgrade_available = getenv_ulong("upgrade_available", 10, 0); + int upgrade_available = env_get_ulong("upgrade_available", 10, 0); if (upgrade_available) { - setenv_ulong("bootcount", a); - saveenv(); + env_set_ulong("bootcount", a); + env_save(); } } ulong bootcount_load(void) { - int upgrade_available = getenv_ulong("upgrade_available", 10, 0); + int upgrade_available = env_get_ulong("upgrade_available", 10, 0); ulong val = 0; if (upgrade_available) - val = getenv_ulong("bootcount", 10, 0); + val = env_get_ulong("bootcount", 10, 0); return val; } diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 60bd706fa2..7765148876 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -12,7 +12,7 @@ config CLK config SPL_CLK bool "Enable clock support in SPL" - depends on CLK + depends on CLK && SPL_DM help The clock subsystem adds a small amount of overhead to the image. If this is acceptable and you have a need to use clock drivers in @@ -20,6 +20,16 @@ config SPL_CLK setting up clocks within SPL, and allows the same drivers to be used as U-Boot proper. +config TPL_CLK + bool "Enable clock support in TPL" + depends on CLK && TPL_DM + help + The clock subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use clock drivers in + SPL, enable this option. It might provide a cleaner interface to + setting up clocks within TPL, and allows the same drivers to be + used as U-Boot proper. + config CLK_BCM6345 bool "Clock controller driver for BCM6345" depends on CLK && ARCH_BMIPS diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 159f285f9a..b7735933be 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CLK) += clk-uclass.o clk_fixed_rate.o +obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o clk_fixed_rate.o obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_SANDBOX) += clk_sandbox.o obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o diff --git a/drivers/clk/rockchip/clk_rk3036.c b/drivers/clk/rockchip/clk_rk3036.c index 5ecf5129d8..83f4ae6ca3 100644 --- a/drivers/clk/rockchip/clk_rk3036.c +++ b/drivers/clk/rockchip/clk_rk3036.c @@ -235,7 +235,7 @@ static ulong rockchip_mmc_get_clk(struct rk3036_cru *cru, uint clk_general_rate, } src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate; - return DIV_TO_RATE(src_rate, div); + return DIV_TO_RATE(src_rate, div) / 2; } static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate, @@ -247,10 +247,11 @@ static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate, debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); /* mmc clock auto divide 2 in internal */ - src_clk_div = (clk_general_rate / 2 + freq - 1) / freq; + src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq); - if (src_clk_div > 0x7f) { - src_clk_div = (OSC_HZ / 2 + freq - 1) / freq; + if (src_clk_div > 128) { + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); + assert(src_clk_div - 1 < 128); mux = EMMC_SEL_24M; } else { mux = EMMC_SEL_GPLL; diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c index 6f30332878..8c2c9bc1d8 100644 --- a/drivers/clk/rockchip/clk_rk3188.c +++ b/drivers/clk/rockchip/clk_rk3188.c @@ -71,9 +71,6 @@ enum { SOCSTS_GPLL_LOCK = 1 << 8, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _nr, _no) {\ @@ -287,7 +284,7 @@ static ulong rockchip_mmc_get_clk(struct rk3188_cru *cru, uint gclk_rate, return -EINVAL; } - return DIV_TO_RATE(gclk_rate, div); + return DIV_TO_RATE(gclk_rate, div) / 2; } static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate, @@ -296,7 +293,8 @@ static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate, int src_clk_div; debug("%s: gclk_rate=%u\n", __func__, gclk_rate); - src_clk_div = RATE_TO_DIV(gclk_rate, freq); + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq) - 1; assert(src_clk_div <= 0x3f); switch (periph) { @@ -350,8 +348,9 @@ static ulong rockchip_spi_get_clk(struct rk3188_cru *cru, uint gclk_rate, static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate, int periph, uint freq) { - int src_clk_div = RATE_TO_DIV(gclk_rate, freq); + int src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1; + assert(src_clk_div < 128); switch (periph) { case SCLK_SPI0: assert(src_clk_div <= SPI0_DIV_MASK); @@ -400,8 +399,8 @@ static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf, * reparent aclk_cpu_pre from apll to gpll * set up dependent divisors for PCLK/HCLK and ACLK clocks. */ - aclk_div = RATE_TO_DIV(GPLL_HZ, CPU_ACLK_HZ); - assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f); + aclk_div = DIV_ROUND_UP(GPLL_HZ, CPU_ACLK_HZ) - 1; + assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f); rk_clrsetreg(&cru->cru_clksel_con[0], CPU_ACLK_PLL_MASK << CPU_ACLK_PLL_SHIFT | diff --git a/drivers/clk/rockchip/clk_rk322x.c b/drivers/clk/rockchip/clk_rk322x.c index fdeb816e23..d7f6a3c313 100644 --- a/drivers/clk/rockchip/clk_rk322x.c +++ b/drivers/clk/rockchip/clk_rk322x.c @@ -26,9 +26,6 @@ enum { OUTPUT_MIN_HZ = 24 * 1000000, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ @@ -239,7 +236,7 @@ static ulong rockchip_mmc_get_clk(struct rk322x_cru *cru, uint clk_general_rate, } src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate; - return DIV_TO_RATE(src_rate, div); + return DIV_TO_RATE(src_rate, div) / 2; } static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate, @@ -250,11 +247,12 @@ static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate, debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate); - /* mmc clock auto divide 2 in internal */ - src_clk_div = (clk_general_rate / 2 + freq - 1) / freq; + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(clk_general_rate / 2, freq); - if (src_clk_div > 0x7f) { - src_clk_div = (OSC_HZ / 2 + freq - 1) / freq; + if (src_clk_div > 128) { + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); + assert(src_clk_div - 1 < 128); mux = EMMC_SEL_24M; } else { mux = EMMC_SEL_GPLL; diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 792ee76509..478195b10b 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -118,9 +118,6 @@ enum { SOCSTS_NPLL_LOCK = 1 << 9, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _nr, _no) {\ @@ -530,10 +527,12 @@ static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate, int mux; debug("%s: gclk_rate=%u\n", __func__, gclk_rate); - src_clk_div = RATE_TO_DIV(gclk_rate, freq); + /* mmc clock default div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq); if (src_clk_div > 0x3f) { - src_clk_div = RATE_TO_DIV(OSC_HZ, freq); + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, freq); + assert(src_clk_div < 0x40); mux = EMMC_PLL_SELECT_24MHZ; assert((int)EMMC_PLL_SELECT_24MHZ == (int)MMC0_PLL_SELECT_24MHZ); @@ -607,7 +606,8 @@ static ulong rockchip_spi_set_clk(struct rk3288_cru *cru, uint gclk_rate, int src_clk_div; debug("%s: clk_general_rate=%u\n", __func__, gclk_rate); - src_clk_div = RATE_TO_DIV(gclk_rate, freq); + src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1; + assert(src_clk_div < 128); switch (periph) { case SCLK_SPI0: rk_clrsetreg(&cru->cru_clksel_con[25], diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c index 2065a8a65b..c3a6650de0 100644 --- a/drivers/clk/rockchip/clk_rk3328.c +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -412,9 +412,9 @@ static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id) if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT == CLK_EMMC_PLL_SEL_24M) - return DIV_TO_RATE(OSC_HZ, div); + return DIV_TO_RATE(OSC_HZ, div) / 2; else - return DIV_TO_RATE(GPLL_HZ, div); + return DIV_TO_RATE(GPLL_HZ, div) / 2; } static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru, @@ -436,11 +436,12 @@ static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru, return -EINVAL; } /* Select clk_sdmmc/emmc source from GPLL by default */ - src_clk_div = GPLL_HZ / set_rate; + /* mmc clock defaulg div 2 internal, need provide double in cru */ + src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate); if (src_clk_div > 127) { /* use 24MHz source for 400KHz clock */ - src_clk_div = OSC_HZ / set_rate; + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); rk_clrsetreg(&cru->clksel_con[con_id], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index e1d9aeb8e5..2be1f572d7 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -1,13 +1,16 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan <andy.yan@rock-chips.com> + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * SPDX-License-Identifier: GPL-2.0 */ #include <common.h> #include <clk-uclass.h> #include <dm.h> +#include <dt-structs.h> #include <errno.h> +#include <mapmem.h> #include <syscon.h> #include <asm/arch/clock.h> #include <asm/arch/cru_rk3368.h> @@ -18,6 +21,12 @@ DECLARE_GLOBAL_DATA_PTR; +#if CONFIG_IS_ENABLED(OF_PLATDATA) +struct rk3368_clk_plat { + struct dtd_rockchip_rk3368_cru dtd; +}; +#endif + struct pll_div { u32 nr; u32 nf; @@ -30,9 +39,6 @@ struct pll_div { #define GPLL_HZ (576 * 1000 * 1000) #define CPLL_HZ (400 * 1000 * 1000) -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _nr, _no) { \ @@ -41,10 +47,16 @@ struct pll_div { (_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \ "divisors on line " __stringify(__LINE__)); +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2); static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2); +#if !defined(CONFIG_TPL_BUILD) static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 1, 2); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 6); +#endif +#endif + +static ulong rk3368_clk_get_rate(struct clk *clk); /* Get pll rate by id */ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, @@ -73,8 +85,9 @@ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, } } +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, - const struct pll_div *div, bool has_bwadj) + const struct pll_div *div) { struct rk3368_pll *pll = &cru->pll[pll_id]; /* All PLLs have same VCO and output frequency range restrictions*/ @@ -92,6 +105,12 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, ((div->nr - 1) << PLL_NR_SHIFT) | ((div->no - 1) << PLL_OD_SHIFT)); writel((div->nf - 1) << PLL_NF_SHIFT, &pll->con1); + /* + * BWADJ should be set to NF / 2 to ensure the nominal bandwidth. + * Compare the RK3368 TRM, section "3.6.4 PLL Bandwidth Adjustment". + */ + clrsetbits_le32(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1); + udelay(10); /* return from reset */ @@ -106,15 +125,23 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, return 0; } +#endif +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static void rkclk_init(struct rk3368_cru *cru) { u32 apllb, aplll, dpll, cpll, gpll; - rkclk_set_pll(cru, APLLB, &apll_b_init_cfg, false); - rkclk_set_pll(cru, APLLL, &apll_l_init_cfg, false); - rkclk_set_pll(cru, GPLL, &gpll_init_cfg, false); - rkclk_set_pll(cru, CPLL, &cpll_init_cfg, false); + rkclk_set_pll(cru, APLLB, &apll_b_init_cfg); + rkclk_set_pll(cru, APLLL, &apll_l_init_cfg); +#if !defined(CONFIG_TPL_BUILD) + /* + * If we plan to return to the boot ROM, we can't increase the + * GPLL rate from the SPL stage. + */ + rkclk_set_pll(cru, GPLL, &gpll_init_cfg); + rkclk_set_pll(cru, CPLL, &cpll_init_cfg); +#endif apllb = rkclk_pll_get_rate(cru, APLLB); aplll = rkclk_pll_get_rate(cru, APLLL); @@ -125,17 +152,19 @@ static void rkclk_init(struct rk3368_cru *cru) debug("%s apllb(%d) apll(%d) dpll(%d) cpll(%d) gpll(%d)\n", __func__, apllb, aplll, dpll, cpll, gpll); } +#endif +#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT) static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) { u32 div, con, con_id, rate; u32 pll_rate; switch (clk_id) { - case SCLK_SDMMC: + case HCLK_SDMMC: con_id = 50; break; - case SCLK_EMMC: + case HCLK_EMMC: con_id = 51; break; case SCLK_SDIO0: @@ -146,7 +175,7 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) } con = readl(&cru->clksel_con[con_id]); - switch ((con & MMC_PLL_SEL_MASK) >> MMC_PLL_SEL_SHIFT) { + switch (con & MMC_PLL_SEL_MASK) { case MMC_PLL_SEL_GPLL: pll_rate = rkclk_pll_get_rate(cru, GPLL); break; @@ -154,6 +183,8 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) pll_rate = OSC_HZ; break; case MMC_PLL_SEL_CPLL: + pll_rate = rkclk_pll_get_rate(cru, CPLL); + break; case MMC_PLL_SEL_USBPHY_480M: default: return -EINVAL; @@ -161,23 +192,76 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) div = (con & MMC_CLK_DIV_MASK) >> MMC_CLK_DIV_SHIFT; rate = DIV_TO_RATE(pll_rate, div); + debug("%s: raw rate %d (post-divide by 2)\n", __func__, rate); return rate >> 1; } -static ulong rk3368_mmc_set_clk(struct rk3368_cru *cru, - ulong clk_id, ulong rate) +static ulong rk3368_mmc_find_best_rate_and_parent(struct clk *clk, + ulong rate, + u32 *best_mux, + u32 *best_div) +{ + int i; + ulong best_rate = 0; + const ulong MHz = 1000000; + const struct { + u32 mux; + ulong rate; + } parents[] = { + { .mux = MMC_PLL_SEL_CPLL, .rate = CPLL_HZ }, + { .mux = MMC_PLL_SEL_GPLL, .rate = GPLL_HZ }, + { .mux = MMC_PLL_SEL_24M, .rate = 24 * MHz } + }; + + debug("%s: target rate %ld\n", __func__, rate); + for (i = 0; i < ARRAY_SIZE(parents); ++i) { + /* + * Find the largest rate no larger than the target-rate for + * the current parent. + */ + ulong parent_rate = parents[i].rate; + u32 div = DIV_ROUND_UP(parent_rate, rate); + u32 adj_div = div; + ulong new_rate = parent_rate / adj_div; + + debug("%s: rate %ld, parent-mux %d, parent-rate %ld, div %d\n", + __func__, rate, parents[i].mux, parents[i].rate, div); + + /* Skip, if not representable */ + if ((div - 1) > MMC_CLK_DIV_MASK) + continue; + + /* Skip, if we already have a better (or equal) solution */ + if (new_rate <= best_rate) + continue; + + /* This is our new best rate. */ + best_rate = new_rate; + *best_mux = parents[i].mux; + *best_div = div - 1; + } + + debug("%s: best_mux = %x, best_div = %d, best_rate = %ld\n", + __func__, *best_mux, *best_div, best_rate); + + return best_rate; +} + +static ulong rk3368_mmc_set_clk(struct clk *clk, ulong rate) { - u32 div; - u32 con_id; - u32 gpll_rate = rkclk_pll_get_rate(cru, GPLL); + struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); + struct rk3368_cru *cru = priv->cru; + ulong clk_id = clk->id; + u32 con_id, mux = 0, div = 0; - div = RATE_TO_DIV(gpll_rate, rate << 1); + /* Find the best parent and rate */ + rk3368_mmc_find_best_rate_and_parent(clk, rate << 1, &mux, &div); switch (clk_id) { - case SCLK_SDMMC: + case HCLK_SDMMC: con_id = 50; break; - case SCLK_EMMC: + case HCLK_EMMC: con_id = 51; break; case SCLK_SDIO0: @@ -187,33 +271,154 @@ static ulong rk3368_mmc_set_clk(struct rk3368_cru *cru, return -EINVAL; } - if (div > 0x3f) { - div = RATE_TO_DIV(OSC_HZ, rate); - rk_clrsetreg(&cru->clksel_con[con_id], - MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK, - (MMC_PLL_SEL_24M << MMC_PLL_SEL_SHIFT) | - (div << MMC_CLK_DIV_SHIFT)); - } else { - rk_clrsetreg(&cru->clksel_con[con_id], - MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK, - (MMC_PLL_SEL_GPLL << MMC_PLL_SEL_SHIFT) | - div << MMC_CLK_DIV_SHIFT); - } + rk_clrsetreg(&cru->clksel_con[con_id], + MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK, + mux | div); return rk3368_mmc_get_clk(cru, clk_id); } +#endif + +#if IS_ENABLED(CONFIG_TPL_BUILD) +static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate) +{ + const struct pll_div *dpll_cfg = NULL; + const ulong MHz = 1000000; + + /* Fout = ((Fin /NR) * NF )/ NO */ + static const struct pll_div dpll_1200 = PLL_DIVISORS(1200 * MHz, 1, 1); + static const struct pll_div dpll_1332 = PLL_DIVISORS(1332 * MHz, 2, 1); + static const struct pll_div dpll_1600 = PLL_DIVISORS(1600 * MHz, 3, 2); + + switch (set_rate) { + case 1200*MHz: + dpll_cfg = &dpll_1200; + break; + case 1332*MHz: + dpll_cfg = &dpll_1332; + break; + case 1600*MHz: + dpll_cfg = &dpll_1600; + break; + default: + error("Unsupported SDRAM frequency!,%ld\n", set_rate); + } + rkclk_set_pll(cru, DPLL, dpll_cfg); + + return set_rate; +} +#endif + +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) +static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru, + ulong clk_id, ulong set_rate) +{ + /* + * This models the 'assigned-clock-parents = <&ext_gmac>' from + * the DTS and switches to the 'ext_gmac' clock parent. + */ + rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK); + return set_rate; +} +#endif + +/* + * RK3368 SPI clocks have a common divider-width (7 bits) and a single bit + * to select either CPLL or GPLL as the clock-parent. The location within + * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable. + */ + +struct spi_clkreg { + uint8_t reg; /* CLKSEL_CON[reg] register in CRU */ + uint8_t div_shift; + uint8_t sel_shift; +}; + +/* + * The entries are numbered relative to their offset from SCLK_SPI0. + */ +static const struct spi_clkreg spi_clkregs[] = { + [0] = { .reg = 45, .div_shift = 0, .sel_shift = 7, }, + [1] = { .reg = 45, .div_shift = 8, .sel_shift = 15, }, + [2] = { .reg = 46, .div_shift = 8, .sel_shift = 15, }, +}; + +static inline u32 extract_bits(u32 val, unsigned width, unsigned shift) +{ + return (val >> shift) & ((1 << width) - 1); +} + +static ulong rk3368_spi_get_clk(struct rk3368_cru *cru, ulong clk_id) +{ + const struct spi_clkreg *spiclk = NULL; + u32 div, val; + + switch (clk_id) { + case SCLK_SPI0 ... SCLK_SPI2: + spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; + break; + + default: + error("%s: SPI clk-id %ld not supported\n", __func__, clk_id); + return -EINVAL; + } + + val = readl(&cru->clksel_con[spiclk->reg]); + div = extract_bits(val, 7, spiclk->div_shift); + + debug("%s: div 0x%x\n", __func__, div); + return DIV_TO_RATE(GPLL_HZ, div); +} + +static ulong rk3368_spi_set_clk(struct rk3368_cru *cru, ulong clk_id, uint hz) +{ + const struct spi_clkreg *spiclk = NULL; + int src_clk_div; + + src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz); + assert(src_clk_div < 127); + + switch (clk_id) { + case SCLK_SPI0 ... SCLK_SPI2: + spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; + break; + + default: + error("%s: SPI clk-id %ld not supported\n", __func__, clk_id); + return -EINVAL; + } + + rk_clrsetreg(&cru->clksel_con[spiclk->reg], + ((0x7f << spiclk->div_shift) | + (0x1 << spiclk->sel_shift)), + ((src_clk_div << spiclk->div_shift) | + (1 << spiclk->sel_shift))); + + return rk3368_spi_get_clk(cru, clk_id); +} static ulong rk3368_clk_get_rate(struct clk *clk) { struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); ulong rate = 0; - debug("%s id:%ld\n", __func__, clk->id); + debug("%s: id %ld\n", __func__, clk->id); switch (clk->id) { + case PLL_CPLL: + rate = rkclk_pll_get_rate(priv->cru, CPLL); + break; + case PLL_GPLL: + rate = rkclk_pll_get_rate(priv->cru, GPLL); + break; + case SCLK_SPI0 ... SCLK_SPI2: + rate = rk3368_spi_get_clk(priv->cru, clk->id); + break; +#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT) case HCLK_SDMMC: case HCLK_EMMC: rate = rk3368_mmc_get_clk(priv->cru, clk->id); break; +#endif default: return -ENOENT; } @@ -223,15 +428,31 @@ static ulong rk3368_clk_get_rate(struct clk *clk) static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate) { - struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); + __maybe_unused struct rk3368_clk_priv *priv = dev_get_priv(clk->dev); ulong ret = 0; debug("%s id:%ld rate:%ld\n", __func__, clk->id, rate); switch (clk->id) { - case SCLK_SDMMC: - case SCLK_EMMC: - ret = rk3368_mmc_set_clk(priv->cru, clk->id, rate); + case SCLK_SPI0 ... SCLK_SPI2: + ret = rk3368_spi_set_clk(priv->cru, clk->id, rate); break; +#if IS_ENABLED(CONFIG_TPL_BUILD) + case CLK_DDR: + ret = rk3368_ddr_set_clk(priv->cru, rate); + break; +#endif +#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT) + case HCLK_SDMMC: + case HCLK_EMMC: + ret = rk3368_mmc_set_clk(clk, rate); + break; +#endif +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) + case SCLK_MAC: + /* select the external clock */ + ret = rk3368_gmac_set_clk(priv->cru, clk->id, rate); + break; +#endif default: return -ENOENT; } @@ -246,18 +467,26 @@ static struct clk_ops rk3368_clk_ops = { static int rk3368_clk_probe(struct udevice *dev) { - struct rk3368_clk_priv *priv = dev_get_priv(dev); + struct rk3368_clk_priv __maybe_unused *priv = dev_get_priv(dev); +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct rk3368_clk_plat *plat = dev_get_platdata(dev); + priv->cru = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]); +#endif +#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) rkclk_init(priv->cru); +#endif return 0; } static int rk3368_clk_ofdata_to_platdata(struct udevice *dev) { +#if !CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3368_clk_priv *priv = dev_get_priv(dev); priv->cru = (struct rk3368_cru *)devfdt_get_addr(dev); +#endif return 0; } @@ -284,6 +513,9 @@ U_BOOT_DRIVER(rockchip_rk3368_cru) = { .id = UCLASS_CLK, .of_match = rk3368_clk_ids, .priv_auto_alloc_size = sizeof(struct rk3368_clk_priv), +#if CONFIG_IS_ENABLED(OF_PLATDATA) + .platdata_auto_alloc_size = sizeof(struct rk3368_clk_plat), +#endif .ofdata_to_platdata = rk3368_clk_ofdata_to_platdata, .ops = &rk3368_clk_ops, .bind = rk3368_clk_bind, diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 53d2a3f85d..3edafea140 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -676,8 +676,8 @@ static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) const struct spi_clkreg *spiclk = NULL; int src_clk_div; - src_clk_div = RATE_TO_DIV(GPLL_HZ, hz); - assert(src_clk_div < 127); + src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1; + assert(src_clk_div < 128); switch (clk_id) { case SCLK_SPI1 ... SCLK_SPI5: @@ -750,18 +750,21 @@ static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id) case HCLK_SDMMC: case SCLK_SDMMC: con = readl(&cru->clksel_con[16]); + /* dwmmc controller have internal div 2 */ + div = 2; break; case SCLK_EMMC: con = readl(&cru->clksel_con[21]); + div = 1; break; default: return -EINVAL; } - div = (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; + div *= (con & CLK_EMMC_DIV_CON_MASK) >> CLK_EMMC_DIV_CON_SHIFT; if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT == CLK_EMMC_PLL_SEL_24M) - return DIV_TO_RATE(24*1000*1000, div); + return DIV_TO_RATE(OSC_HZ, div); else return DIV_TO_RATE(GPLL_HZ, div); } @@ -776,11 +779,13 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, case HCLK_SDMMC: case SCLK_SDMMC: /* Select clk_sdmmc source from GPLL by default */ - src_clk_div = GPLL_HZ / set_rate; + /* mmc clock defaulg div 2 internal, provide double in cru */ + src_clk_div = DIV_ROUND_UP(GPLL_HZ / 2, set_rate); - if (src_clk_div > 127) { + if (src_clk_div > 128) { /* use 24MHz source for 400KHz clock */ - src_clk_div = 24*1000*1000 / set_rate; + src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate); + assert(src_clk_div - 1 < 128); rk_clrsetreg(&cru->clksel_con[16], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT | @@ -794,8 +799,8 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, break; case SCLK_EMMC: /* Select aclk_emmc source from GPLL */ - src_clk_div = GPLL_HZ / aclk_emmc; - assert(src_clk_div - 1 < 31); + src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc); + assert(src_clk_div - 1 < 32); rk_clrsetreg(&cru->clksel_con[21], ACLK_EMMC_PLL_SEL_MASK | ACLK_EMMC_DIV_CON_MASK, @@ -803,8 +808,8 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, (src_clk_div - 1) << ACLK_EMMC_DIV_CON_SHIFT); /* Select clk_emmc source from GPLL too */ - src_clk_div = GPLL_HZ / set_rate; - assert(src_clk_div - 1 < 127); + src_clk_div = DIV_ROUND_UP(GPLL_HZ, set_rate); + assert(src_clk_div - 1 < 128); rk_clrsetreg(&cru->clksel_con[22], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, diff --git a/drivers/clk/rockchip/clk_rv1108.c b/drivers/clk/rockchip/clk_rv1108.c index 818293dfe8..cf966bbdc3 100644 --- a/drivers/clk/rockchip/clk_rv1108.c +++ b/drivers/clk/rockchip/clk_rv1108.c @@ -25,9 +25,6 @@ enum { OUTPUT_MIN_HZ = 24 * 1000000, }; -#define RATE_TO_DIV(input_rate, output_rate) \ - ((input_rate) / (output_rate) - 1); - #define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1)) #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\ diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index f8b19a48cc..7afef1f9a3 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -97,7 +97,17 @@ config REGMAP config SPL_REGMAP bool "Support register maps in SPL" - depends on DM + depends on SPL_DM + help + Hardware peripherals tend to have one or more sets of registers + which can be accessed to control the hardware. A register map + models this with a simple read/write interface. It can in principle + support any bus type (I2C, SPI) but so far this only supports + direct memory access. + +config TPL_REGMAP + bool "Support register maps in TPL" + depends on TPL_DM help Hardware peripherals tend to have one or more sets of registers which can be accessed to control the hardware. A register map @@ -116,7 +126,16 @@ config SYSCON config SPL_SYSCON bool "Support system controllers in SPL" - depends on REGMAP + depends on SPL_REGMAP + help + Many SoCs have a number of system controllers which are dealt with + as a group by a single driver. Some common functionality is provided + by this uclass, including accessing registers via regmap and + assigning a unique number to each. + +config TPL_SYSCON + bool "Support system controllers in TPL" + depends on TPL_REGMAP help Many SoCs have a number of system controllers which are dealt with as a group by a single driver. Some common functionality is provided diff --git a/drivers/core/Makefile b/drivers/core/Makefile index fd2d4de0c8..3d68c70b57 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -9,8 +9,8 @@ obj-$(CONFIG_DEVRES) += devres.o obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE) += device-remove.o obj-$(CONFIG_$(SPL_)SIMPLE_BUS) += simple-bus.o obj-$(CONFIG_DM) += dump.o -obj-$(CONFIG_$(SPL_)REGMAP) += regmap.o -obj-$(CONFIG_$(SPL_)SYSCON) += syscon-uclass.o +obj-$(CONFIG_$(SPL_TPL_)REGMAP) += regmap.o +obj-$(CONFIG_$(SPL_TPL_)SYSCON) += syscon-uclass.o obj-$(CONFIG_OF_LIVE) += of_access.o of_addr.o ifndef CONFIG_DM_DEV_READ_INLINE obj-$(CONFIG_OF_CONTROL) += read.o diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index 3349fc5c3b..058c9b9da8 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -469,7 +469,7 @@ step2: #define CTLR_INTLV_MASK 0x20000000 /* Perform build-in test on memory. Three-way interleaving is not yet * supported by this code. */ - if (getenv_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) { + if (env_get_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) { puts("Running BIST test. This will take a while..."); cs0_config = ddr_in32(&ddr->cs0_config); cs0_bnds = ddr_in32(&ddr->cs0_bnds); diff --git a/drivers/ddr/fsl/interactive.c b/drivers/ddr/fsl/interactive.c index 653bbabc95..c99bd2fb6d 100644 --- a/drivers/ddr/fsl/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -1861,7 +1861,7 @@ int fsl_ddr_interactive_env_var_exists(void) { char buffer[CONFIG_SYS_CBSIZE]; - if (getenv_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0) + if (env_get_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0) return 1; return 0; @@ -1891,11 +1891,11 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set) }; if (var_is_set) { - if (getenv_f("ddr_interactive", buffer2, CONFIG_SYS_CBSIZE) > 0) { + if (env_get_f("ddr_interactive", buffer2, + CONFIG_SYS_CBSIZE) > 0) p = buffer2; - } else { + else var_is_set = 0; - } } /* diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index 20edd2dc28..a7eaed1bd7 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -18,7 +18,7 @@ * Use our own stack based buffer before relocation to allow accessing longer * hwconfig strings that might be in the environment before we've relocated. * This is pretty fragile on both the use of stack and if the buffer is big - * enough. However we will get a warning from getenv_f for the later. + * enough. However we will get a warning from env_get_f() for the latter. */ /* Board-specific functions defined in each board's ddr.c */ @@ -755,7 +755,7 @@ unsigned int populate_memctl_options(const common_timing_params_t *common_dimm, * Extract hwconfig from environment since we have not properly setup * the environment but need it for ddr config params */ - if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) + if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; #if defined(CONFIG_SYS_FSL_DDR3) || \ @@ -1399,7 +1399,7 @@ int fsl_use_spd(void) * Extract hwconfig from environment since we have not properly setup * the environment but need it for ddr config params */ - if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) + if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; /* if hwconfig is not enabled, or "sdram" is not defined, use spd */ diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c index 12b5b04109..a704a3e9d3 100644 --- a/drivers/ddr/marvell/a38x/ddr3_debug.c +++ b/drivers/ddr/marvell/a38x/ddr3_debug.c @@ -327,8 +327,6 @@ int ddr3_tip_print_log(u32 dev_num, u32 mem_addr) u32 if_id = 0; struct hws_topology_map *tm = ddr3_get_topology_map(); - mem_addr = mem_addr; - #ifndef EXCLUDE_SWITCH_DEBUG if ((is_validate_window_per_if != 0) || (is_validate_window_per_pup != 0)) { @@ -820,7 +818,6 @@ static int ddr3_tip_access_atr(u32 dev_num, u32 flag_id, u32 value, u32 **ptr) u32 tmp_val = 0, if_id = 0, pup_id = 0; struct hws_topology_map *tm = ddr3_get_topology_map(); - dev_num = dev_num; *ptr = NULL; switch (flag_id) { @@ -1169,8 +1166,6 @@ int print_adll(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]) u32 i, j; struct hws_topology_map *tm = ddr3_get_topology_map(); - dev_num = dev_num; - for (j = 0; j < tm->num_of_bus_per_interface; j++) { VALIDATE_ACTIVE(tm->bus_act_mask, j); for (i = 0; i < MAX_INTERFACE_NUM; i++) { @@ -1229,8 +1224,6 @@ int ddr3_tip_sweep_test(u32 dev_num, u32 test_type, u32 reg_addr = 0; struct hws_topology_map *tm = ddr3_get_topology_map(); - mem_addr = mem_addr; - if (test_type == 0) { reg_addr = 1; ui_mask_bit = 0x3f; @@ -1301,8 +1294,6 @@ int ddr3_tip_run_sweep_test(int dev_num, u32 repeat_num, u32 direction, u32 max_cs = hws_ddr3_tip_max_cs_get(); struct hws_topology_map *tm = ddr3_get_topology_map(); - repeat_num = repeat_num; - if (mode == 1) { /* per pup */ start_pup = 0; diff --git a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c index 9d216da96d..2909ae3c6f 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c @@ -697,8 +697,6 @@ int ddr3_tip_print_centralization_result(u32 dev_num) u32 if_id = 0, bus_id = 0; struct hws_topology_map *tm = ddr3_get_topology_map(); - dev_num = dev_num; - printf("Centralization Results\n"); printf("I/F0 Result[0 - success 1-fail 2 - state_2 3 - state_3] ...\n"); for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index f6281f4baa..ff732ac309 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -62,7 +62,7 @@ int dfu_init_env_entities(char *interface, char *devstr) #ifdef CONFIG_SET_DFU_ALT_INFO set_dfu_alt_info(interface, devstr); #endif - str_env = getenv("dfu_alt_info"); + str_env = env_get("dfu_alt_info"); if (!str_env) { error("\"dfu_alt_info\" env variable not defined!\n"); return -EINVAL; @@ -101,7 +101,7 @@ unsigned char *dfu_get_buf(struct dfu_entity *dfu) if (dfu_buf != NULL) return dfu_buf; - s = getenv("dfu_bufsiz"); + s = env_get("dfu_bufsiz"); if (s) dfu_buf_size = (unsigned long)simple_strtol(s, NULL, 0); @@ -123,7 +123,7 @@ static char *dfu_get_hash_algo(void) { char *s; - s = getenv("dfu_hash_algo"); + s = env_get("dfu_hash_algo"); if (!s) return NULL; diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index bb23e7fdcb..39e10b1a5a 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -161,7 +161,7 @@ static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu, } if (op != DFU_OP_WRITE) { - str_env = getenv("filesize"); + str_env = env_get("filesize"); if (str_env == NULL) { puts("dfu: Wrong file size!\n"); return -1; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 63951e0dbe..ffeda9425a 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -109,6 +109,15 @@ config OMAP_GPIO Support GPIO controllers on the TI OMAP3/4/5 and related (such as AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs. +config CMD_PCA953X + bool "Enable the pca953x command" + help + Deprecated: This should be converted to driver model. + + This command provides access to a pca953x GPIO device using the + legacy GPIO interface. Several subcommands are provided which mirror + the standard 'gpio' command. It should use that instead. + config PM8916_GPIO bool "Qualcomm PM8916 PMIC GPIO/keypad driver" depends on DM_GPIO && PMIC_PM8916 @@ -156,6 +165,15 @@ config SANDBOX_GPIO_COUNT of 'anonymous' GPIOs that do not belong to any device or bank. Select a suitable value depending on your needs. +config CMD_TCA642X + bool "tca642x - Command to access tca642x state" + help + DEPRECATED - This needs conversion to driver model + + This provides a way to looking at the pin state of this device. + This mirrors the 'gpio' command and that should be used in preference + to custom code. + config TEGRA_GPIO bool "Tegra20..210 GPIO driver" depends on DM_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 8937e99b47..1396467ab6 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o obj-$(CONFIG_XILINX_GPIO) += xilinx_gpio.o obj-$(CONFIG_ADI_GPIO2) += adi_gpio2.o obj-$(CONFIG_TCA642X) += tca642x.o -oby-$(CONFIG_SX151X) += sx151x.o obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o obj-$(CONFIG_LPC32XX_GPIO) += lpc32xx_gpio.o obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 238e02805c..d1c1ae1411 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -143,7 +143,6 @@ int pca953x_get_val(uint8_t chip) } #ifdef CONFIG_CMD_PCA953X -#ifdef CONFIG_CMD_PCA953X_INFO /* * Display pca953x information */ @@ -193,16 +192,13 @@ static int pca953x_info(uint8_t chip) return 0; } -#endif /* CONFIG_CMD_PCA953X_INFO */ cmd_tbl_t cmd_pca953x[] = { U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""), U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""), U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""), U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""), -#ifdef CONFIG_CMD_PCA953X_INFO U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""), -#endif }; int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -231,13 +227,11 @@ int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1; switch ((long)c->cmd) { -#ifdef CONFIG_CMD_PCA953X_INFO case PCA953X_CMD_INFO: ret = pca953x_info(chip); if (ret) ret = CMD_RET_FAILURE; break; -#endif case PCA953X_CMD_DEVICE: if (argc == 3) @@ -287,10 +281,8 @@ U_BOOT_CMD( "pca953x gpio access", "device [dev]\n" " - show or set current device address\n" -#ifdef CONFIG_CMD_PCA953X_INFO "pca953x info\n" " - display info for current chip\n" -#endif "pca953x output pin 0|1\n" " - set pin as output and drive low or high\n" "pca953x invert pin 0|1\n" diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c index ff245db91d..c04cef4cb9 100644 --- a/drivers/gpio/stm32_gpio.c +++ b/drivers/gpio/stm32_gpio.c @@ -19,7 +19,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) static const unsigned long io_base[] = { STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, @@ -74,81 +73,6 @@ int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, out: return rv; } -#elif defined(CONFIG_STM32F1) -static const unsigned long io_base[] = { - STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, - STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, - STM32_GPIOG_BASE -}; - -#define STM32_GPIO_CR_MODE_MASK 0x3 -#define STM32_GPIO_CR_MODE_SHIFT(p) (p * 4) -#define STM32_GPIO_CR_CNF_MASK 0x3 -#define STM32_GPIO_CR_CNF_SHIFT(p) (p * 4 + 2) - -struct stm32_gpio_regs { - u32 crl; /* GPIO port configuration low */ - u32 crh; /* GPIO port configuration high */ - u32 idr; /* GPIO port input data */ - u32 odr; /* GPIO port output data */ - u32 bsrr; /* GPIO port bit set/reset */ - u32 brr; /* GPIO port bit reset */ - u32 lckr; /* GPIO port configuration lock */ -}; - -#define CHECK_DSC(x) (!x || x->port > 6 || x->pin > 15) -#define CHECK_CTL(x) (!x || x->mode > 3 || x->icnf > 3 || x->ocnf > 3 || \ - x->pupd > 1) - -int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, - const struct stm32_gpio_ctl *ctl) -{ - struct stm32_gpio_regs *gpio_regs; - u32 *cr; - int p, crp; - int rv; - - if (CHECK_DSC(dsc)) { - rv = -EINVAL; - goto out; - } - if (CHECK_CTL(ctl)) { - rv = -EINVAL; - goto out; - } - - p = dsc->pin; - - gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; - - if (p < 8) { - cr = &gpio_regs->crl; - crp = p; - } else { - cr = &gpio_regs->crh; - crp = p - 8; - } - - clrbits_le32(cr, 0x3 << STM32_GPIO_CR_MODE_SHIFT(crp)); - setbits_le32(cr, ctl->mode << STM32_GPIO_CR_MODE_SHIFT(crp)); - - clrbits_le32(cr, 0x3 << STM32_GPIO_CR_CNF_SHIFT(crp)); - /* Inputs set the optional pull up / pull down */ - if (ctl->mode == STM32_GPIO_MODE_IN) { - setbits_le32(cr, ctl->icnf << STM32_GPIO_CR_CNF_SHIFT(crp)); - clrbits_le32(&gpio_regs->odr, 0x1 << p); - setbits_le32(&gpio_regs->odr, ctl->pupd << p); - } else { - setbits_le32(cr, ctl->ocnf << STM32_GPIO_CR_CNF_SHIFT(crp)); - } - - rv = 0; -out: - return rv; -} -#else -#error STM32 family not supported -#endif int stm32_gpout_set(const struct stm32_gpio_dsc *dsc, int state) { @@ -207,20 +131,11 @@ int gpio_direction_input(unsigned gpio) dsc.port = stm32_gpio_to_port(gpio); dsc.pin = stm32_gpio_to_pin(gpio); -#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) ctl.af = STM32_GPIO_AF0; ctl.mode = STM32_GPIO_MODE_IN; ctl.otype = STM32_GPIO_OTYPE_PP; ctl.pupd = STM32_GPIO_PUPD_NO; ctl.speed = STM32_GPIO_SPEED_50M; -#elif defined(CONFIG_STM32F1) - ctl.mode = STM32_GPIO_MODE_IN; - ctl.icnf = STM32_GPIO_ICNF_IN_FLT; - ctl.ocnf = STM32_GPIO_OCNF_GP_PP; /* ignored for input */ - ctl.pupd = STM32_GPIO_PUPD_UP; /* ignored for floating */ -#else -#error STM32 family not supported -#endif return stm32_gpio_config(&dsc, &ctl); } @@ -233,19 +148,10 @@ int gpio_direction_output(unsigned gpio, int value) dsc.port = stm32_gpio_to_port(gpio); dsc.pin = stm32_gpio_to_pin(gpio); -#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7) ctl.af = STM32_GPIO_AF0; ctl.mode = STM32_GPIO_MODE_OUT; ctl.pupd = STM32_GPIO_PUPD_NO; ctl.speed = STM32_GPIO_SPEED_50M; -#elif defined(CONFIG_STM32F1) - ctl.mode = STM32_GPIO_MODE_OUT_50M; - ctl.ocnf = STM32_GPIO_OCNF_GP_PP; - ctl.icnf = STM32_GPIO_ICNF_IN_FLT; /* ignored for output */ - ctl.pupd = STM32_GPIO_PUPD_UP; /* ignored for output */ -#else -#error STM32 family not supported -#endif res = stm32_gpio_config(&dsc, &ctl); if (res < 0) diff --git a/drivers/gpio/sx151x.c b/drivers/gpio/sx151x.c deleted file mode 100644 index 167cf40c71..0000000000 --- a/drivers/gpio/sx151x.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * (C) Copyright 2013 - * Viktar Palstsiuk, Promwad, viktar.palstsiuk@promwad.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Driver for Semtech SX151x SPI GPIO Expanders - */ - -#include <common.h> -#include <spi.h> -#include <sx151x.h> - -#ifndef CONFIG_SX151X_SPI_BUS -#define CONFIG_SX151X_SPI_BUS 0 -#endif - -/* - * The SX151x registers - */ - -#ifdef CONFIG_SX151X_GPIO_COUNT_8 -/* 8bit: SX1511 */ -#define SX151X_REG_DIR 0x07 -#define SX151X_REG_DATA 0x08 -#else -/* 16bit: SX1512 */ -#define SX151X_REG_DIR 0x0F -#define SX151X_REG_DATA 0x11 -#endif -#define SX151X_REG_RESET 0x7D - -static int sx151x_spi_write(int chip, unsigned char reg, unsigned char val) -{ - struct spi_slave *slave; - unsigned char buf[2]; - int ret; - - slave = spi_setup_slave(CONFIG_SX151X_SPI_BUS, chip, 1000000, - SPI_MODE_0); - if (!slave) - return 0; - - spi_claim_bus(slave); - - buf[0] = reg; - buf[1] = val; - - ret = spi_xfer(slave, 16, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END); - if (ret < 0) - printf("spi%d.%d write fail: can't write %02x to %02x: %d\n", - CONFIG_SX151X_SPI_BUS, chip, val, reg, ret); - else - printf("spi%d.%d write 0x%02x to register 0x%02x\n", - CONFIG_SX151X_SPI_BUS, chip, val, reg); - spi_release_bus(slave); - spi_free_slave(slave); - - return ret; -} - -static int sx151x_spi_read(int chip, unsigned char reg) -{ - struct spi_slave *slave; - int ret; - - slave = spi_setup_slave(CONFIG_SX151X_SPI_BUS, chip, 1000000, - SPI_MODE_0); - if (!slave) - return 0; - - spi_claim_bus(slave); - - ret = spi_w8r8(slave, reg | 0x80); - if (ret < 0) - printf("spi%d.%d read fail: can't read %02x: %d\n", - CONFIG_SX151X_SPI_BUS, chip, reg, ret); - else - printf("spi%d.%d read register 0x%02x: 0x%02x\n", - CONFIG_SX151X_SPI_BUS, chip, reg, ret); - - spi_release_bus(slave); - spi_free_slave(slave); - - return ret; -} - -static inline void sx151x_find_cfg(int gpio, unsigned char *reg, unsigned char *mask) -{ - *reg -= gpio / 8; - *mask = 1 << (gpio % 8); -} - -static int sx151x_write_cfg(int chip, unsigned char gpio, unsigned char reg, int val) -{ - unsigned char mask; - unsigned char data; - int ret; - - sx151x_find_cfg(gpio, ®, &mask); - ret = sx151x_spi_read(chip, reg); - if (ret < 0) - return ret; - else - data = ret; - data &= ~mask; - data |= (val << (gpio % 8)) & mask; - return sx151x_spi_write(chip, reg, data); -} - -int sx151x_get_value(int chip, int gpio) -{ - unsigned char reg = SX151X_REG_DATA; - unsigned char mask; - int ret; - - sx151x_find_cfg(gpio, ®, &mask); - ret = sx151x_spi_read(chip, reg); - if (ret >= 0) - ret = (ret & mask) != 0 ? 1 : 0; - - return ret; -} - -int sx151x_set_value(int chip, int gpio, int val) -{ - return sx151x_write_cfg(chip, gpio, SX151X_REG_DATA, (val ? 1 : 0)); -} - -int sx151x_direction_input(int chip, int gpio) -{ - return sx151x_write_cfg(chip, gpio, SX151X_REG_DIR, 1); -} - -int sx151x_direction_output(int chip, int gpio) -{ - return sx151x_write_cfg(chip, gpio, SX151X_REG_DIR, 0); -} - -int sx151x_reset(int chip) -{ - int err; - - err = sx151x_spi_write(chip, SX151X_REG_RESET, 0x12); - if (err < 0) - return err; - - err = sx151x_spi_write(chip, SX151X_REG_RESET, 0x34); - return err; -} - -#ifdef CONFIG_CMD_SX151X - -int do_sx151x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int ret = CMD_RET_USAGE, chip = 0, gpio = 0, val = 0; - - if (argc < 3) - return CMD_RET_USAGE; - - /* arg2 used as chip number */ - chip = simple_strtoul(argv[2], NULL, 10); - - if (strcmp(argv[1], "reset") == 0) { - ret = sx151x_reset(chip); - if (!ret) { - printf("Device at spi%d.%d was reset\n", - CONFIG_SX151X_SPI_BUS, chip); - } - return ret; - } - - if (argc < 4) - return CMD_RET_USAGE; - - /* arg3 used as gpio number */ - gpio = simple_strtoul(argv[3], NULL, 10); - - if (strcmp(argv[1], "get") == 0) { - ret = sx151x_get_value(chip, gpio); - if (ret < 0) - printf("Failed to get value at spi%d.%d gpio %d\n", - CONFIG_SX151X_SPI_BUS, chip, gpio); - else { - printf("Value at spi%d.%d gpio %d is %d\n", - CONFIG_SX151X_SPI_BUS, chip, gpio, ret); - ret = 0; - } - return ret; - } - - if (argc < 5) - return CMD_RET_USAGE; - - /* arg4 used as value or direction */ - val = simple_strtoul(argv[4], NULL, 10); - - if (strcmp(argv[1], "set") == 0) { - ret = sx151x_set_value(chip, gpio, val); - if (ret < 0) - printf("Failed to set value at spi%d.%d gpio %d\n", - CONFIG_SX151X_SPI_BUS, chip, gpio); - else - printf("New value at spi%d.%d gpio %d is %d\n", - CONFIG_SX151X_SPI_BUS, chip, gpio, val); - return ret; - } else if (strcmp(argv[1], "dir") == 0) { - if (val == 0) - ret = sx151x_direction_output(chip, gpio); - else - ret = sx151x_direction_input(chip, gpio); - - if (ret < 0) - printf("Failed to set direction of spi%d.%d gpio %d\n", - CONFIG_SX151X_SPI_BUS, chip, gpio); - else - printf("New direction of spi%d.%d gpio %d is %d\n", - CONFIG_SX151X_SPI_BUS, chip, gpio, val); - return ret; - } - - printf("Please see usage\n"); - - return ret; -} - -U_BOOT_CMD( - sx151x, 5, 1, do_sx151x, - "sx151x gpio access", - "dir chip gpio 0|1\n" - " - set gpio direction (0 for output, 1 for input)\n" - "sx151x get chip gpio\n" - " - get gpio value\n" - "sx151x set chip gpio 0|1\n" - " - set gpio value\n" - "sx151x reset chip\n" - " - reset chip" -); - -#endif /* CONFIG_CMD_SX151X */ diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c index 0fd25b17ec..18476e97d1 100644 --- a/drivers/input/i8042.c +++ b/drivers/input/i8042.c @@ -274,7 +274,7 @@ static int i8042_start(struct udevice *dev) /* Init keyboard device (default US layout) */ keymap = KBD_US; - penv = getenv("keymap"); + penv = env_get("keymap"); if (penv != NULL) { if (strncmp(penv, "de", 3) == 0) keymap = KBD_GER; diff --git a/drivers/input/input.c b/drivers/input/input.c index 011667fedd..26da3a95ff 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -652,7 +652,7 @@ int input_stdio_register(struct stdio_dev *dev) error = stdio_register(dev); /* check if this is the standard input device */ - if (!error && strcmp(getenv("stdin"), dev->name) == 0) { + if (!error && strcmp(env_get("stdin"), dev->name) == 0) { /* reassign the console */ if (OVERWRITE_CONSOLE || console_assign(stdin, dev->name)) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 3abd2d30af..b69c9b71e4 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -930,8 +930,6 @@ __weak int esdhc_status_fixup(void *blob, const char *compat) return 1; } #endif - do_fixup_by_compat(blob, compat, "status", "okay", - sizeof("okay"), 1); return 0; } @@ -968,7 +966,9 @@ static int fsl_esdhc_probe(struct udevice *dev) struct fsl_esdhc_priv *priv = dev_get_priv(dev); const void *fdt = gd->fdt_blob; int node = dev_of_offset(dev); +#ifdef CONFIG_DM_REGULATOR struct udevice *vqmmc_dev; +#endif fdt_addr_t addr; unsigned int val; int ret; diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 048a51785e..42bc2efd90 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -2353,7 +2353,7 @@ unsigned long flash_init (void) #ifdef CONFIG_SYS_FLASH_PROTECTION /* read environment from EEPROM */ char s[64]; - getenv_f("unlock", s, sizeof(s)); + env_get_f("unlock", s, sizeof(s)); #endif #ifdef CONFIG_CFI_FLASH /* for driver model */ diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c index 2d2c318adf..e961f518b0 100644 --- a/drivers/mtd/dataflash.c +++ b/drivers/mtd/dataflash.c @@ -155,7 +155,7 @@ int AT91F_DataflashInit (void) return found[0]; } -void AT91F_DataflashSetEnv (void) +void AT91F_Dataflashenv_set(void) { int i, j; int part; @@ -169,8 +169,9 @@ void AT91F_DataflashSetEnv (void) /* Set the environment according to the label...*/ if((env & FLAG_SETENV) == FLAG_SETENV) { start = dataflash_info[i].Device.area_list[j].start; - sprintf((char*) s,"%lX",start); - setenv((char*) area_list[part].label,(char*) s); + sprintf((char *)s, "%lX", start); + env_set((char *)area_list[part].label, + (char *)s); } part++; } diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3508c622e3..71d678fc66 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,4 +1,7 @@ -menu "NAND Device Support" + +menuconfig NAND + bool "NAND Device Support" +if NAND config SYS_NAND_SELF_INIT bool @@ -173,4 +176,4 @@ config SPL_NAND_DENALI endif -endmenu +endif # if NAND diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c index bcddfa0755..e5c0e12faa 100644 --- a/drivers/mtd/spi/sf_dataflash.c +++ b/drivers/mtd/spi/sf_dataflash.c @@ -134,11 +134,17 @@ static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len) debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len); div_u64_rem(len, spi_flash->page_size, &rem); - if (rem) + if (rem) { + printf("%s: len(0x%x) isn't the multiple of page size(0x%x)\n", + dev->name, len, spi_flash->page_size); return -EINVAL; + } div_u64_rem(offset, spi_flash->page_size, &rem); - if (rem) + if (rem) { + printf("%s: offset(0x%x) isn't the multiple of page size(0x%x)\n", + dev->name, offset, spi_flash->page_size); return -EINVAL; + } status = spi_claim_bus(spi); if (status) { diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 0034a28d5f..34f68881ed 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -947,11 +947,25 @@ int spi_flash_scan(struct spi_flash *flash) if (IS_ERR_OR_NULL(info)) return -ENOENT; - /* Flash powers up read-only, so clear BP# bits */ + /* + * Flash powers up read-only, so clear BP# bits. + * + * Note on some flash (like Macronix), QE (quad enable) bit is in the + * same status register as BP# bits, and we need preserve its original + * value during a reboot cycle as this is required by some platforms + * (like Intel ICH SPI controller working under descriptor mode). + */ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL || - JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX || - JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST) - write_sr(flash, 0); + (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST) || + (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX)) { + u8 sr = 0; + + if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX) { + read_sr(flash, &sr); + sr &= STATUS_QEB_MXIC; + } + write_sr(flash, sr); + } flash->name = info->name; flash->memory_map = spi->memory_map; diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c index edca94e30c..c4ccf48af4 100644 --- a/drivers/mtd/spi/spi_flash_ids.c +++ b/drivers/mtd/spi/spi_flash_ids.c @@ -81,6 +81,7 @@ const struct spi_flash_info spi_flash_ids[] = { {"mx25l12805", INFO(0xc22018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) }, {"mx25l25635f", INFO(0xc22019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) }, {"mx25l51235f", INFO(0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, + {"mx25u6435f", INFO(0xc22537, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP) }, {"mx25l12855e", INFO(0xc22618, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) }, {"mx66u51235f", INFO(0xc2253a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) }, {"mx66l1g45g", INFO(0xc2201b, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP) }, diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c index 8245cf51cc..f38f36beb1 100644 --- a/drivers/net/dc2114x.c +++ b/drivers/net/dc2114x.c @@ -750,7 +750,7 @@ static void update_srom(struct eth_device *dev, bd_t *bis) uchar enetaddr[6]; /* Ethernet Addr... */ - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", enetaddr)) return; eeprom[0x0a] = (enetaddr[1] << 8) | enetaddr[0]; eeprom[0x0b] = (enetaddr[3] << 8) | enetaddr[2]; diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 40be52070e..f16b2990d7 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -985,9 +985,18 @@ static void fec_free_descs(struct fec_priv *fec) free(fec->tbd_base); } +#ifdef CONFIG_DM_ETH +struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id) +#else struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id) +#endif { +#ifdef CONFIG_DM_ETH + struct fec_priv *priv = dev_get_priv(dev); + struct ethernet_regs *eth = priv->eth; +#else struct ethernet_regs *eth = (struct ethernet_regs *)base_addr; +#endif struct mii_dev *bus; int ret; @@ -1096,8 +1105,8 @@ static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, sprintf(mac, "eth%daddr", fec->dev_id); else strcpy(mac, "ethaddr"); - if (!getenv(mac)) - eth_setenv_enetaddr(mac, ethaddr); + if (!env_get(mac)) + eth_env_set_enetaddr(mac, ethaddr); } return ret; err4: diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c index 5aeeb87282..3245bee473 100644 --- a/drivers/net/fm/b4860.c +++ b/drivers/net/fm/b4860.c @@ -97,7 +97,7 @@ phy_interface_t fman_port_enet_if(enum fm_port port) * Extract hwconfig from environment since environment * is not setup yet */ - getenv_f("hwconfig", buffer, sizeof(buffer)); + env_get_f("hwconfig", buffer, sizeof(buffer)); buf = buffer; /* check if XFI interface enable in hwconfig for 10g */ diff --git a/drivers/net/fm/fdt.c b/drivers/net/fm/fdt.c index 9918d8089a..5920fecea1 100644 --- a/drivers/net/fm/fdt.c +++ b/drivers/net/fm/fdt.c @@ -36,7 +36,7 @@ void fdt_fixup_fman_firmware(void *blob) return; /* If the environment variable is not set, then exit silently */ - p = getenv("fman_ucode"); + p = env_get("fman_ucode"); if (!p) return; diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 9fe34ad4a9..451dfded77 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -418,7 +418,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) rc = fman_upload_firmware(index, ®->fm_imem, addr); if (rc) return rc; - setenv_addr("fman_ucode", addr); + env_set_addr("fman_ucode", addr); fm_init_muram(index, ®->muram); fm_init_qmi(®->fm_qmi_common); diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c index 1b5779cece..ea50ed38f4 100644 --- a/drivers/net/fm/memac.c +++ b/drivers/net/fm/memac.c @@ -84,6 +84,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if_mode |= IF_MODE_GMII; break; case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: if_mode |= (IF_MODE_GMII | IF_MODE_RG); break; case PHY_INTERFACE_MODE_RMII: @@ -106,7 +107,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if (type != PHY_INTERFACE_MODE_XGMII) if_mode |= IF_MODE_EN_AUTO; - if (type == PHY_INTERFACE_MODE_RGMII) { + if (type == PHY_INTERFACE_MODE_RGMII || + type == PHY_INTERFACE_MODE_RGMII_TXID) { if_mode &= ~IF_MODE_EN_AUTO; if_mode &= ~IF_MODE_SETSP_MASK; switch (speed) { diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 8bf25c7040..bdb6792c72 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -190,8 +190,8 @@ static int mc_fixup_mac_addr(void *blob, int nodeoffset, /* MAC address property present */ if (fdt_get_property(blob, nodeoffset, propname, NULL)) { /* u-boot MAC addr randomly assigned - leave the present one */ - if (!eth_getenv_enetaddr_by_index("eth", eth_dev->index, - env_enetaddr)) + if (!eth_env_get_enetaddr_by_index("eth", eth_dev->index, + env_enetaddr)) return err; } else { size = MC_DT_INCREASE_SIZE + strlen(propname) + len; @@ -530,7 +530,7 @@ static unsigned long get_mc_boot_timeout_ms(void) { unsigned long timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; - char *timeout_ms_env_var = getenv(MC_BOOT_TIMEOUT_ENV_VAR); + char *timeout_ms_env_var = env_get(MC_BOOT_TIMEOUT_ENV_VAR); if (timeout_ms_env_var) { timeout_ms = simple_strtoul(timeout_ms_env_var, NULL, 10); @@ -815,7 +815,7 @@ unsigned long mc_get_dram_block_size(void) { unsigned long dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; - char *dram_block_size_env_var = getenv(MC_MEM_SIZE_ENV_VAR); + char *dram_block_size_env_var = env_get(MC_MEM_SIZE_ENV_VAR); if (dram_block_size_env_var) { dram_block_size = simple_strtoul(dram_block_size_env_var, NULL, @@ -1336,14 +1336,18 @@ int fsl_mc_ldpaa_exit(bd_t *bd) { int err = 0; bool is_dpl_apply_status = false; + bool mc_boot_status = false; if (bd && mc_lazy_dpl_addr && !fsl_mc_ldpaa_exit(NULL)) { mc_apply_dpl(mc_lazy_dpl_addr); mc_lazy_dpl_addr = 0; } + if (!get_mc_boot_status()) + mc_boot_status = true; + /* MC is not loaded intentionally, So return success. */ - if (bd && get_mc_boot_status() != 0) + if (bd && !mc_boot_status) return 0; /* If DPL is deployed, set is_dpl_apply_status as TRUE. */ @@ -1354,11 +1358,14 @@ int fsl_mc_ldpaa_exit(bd_t *bd) * For case MC is loaded but DPL is not deployed, return success and * print message on console. Else FDT fix-up code execution hanged. */ - if (bd && !get_mc_boot_status() && !is_dpl_apply_status) { + if (bd && mc_boot_status && !is_dpl_apply_status) { printf("fsl-mc: DPL not deployed, DPAA2 ethernet not work\n"); return 0; } + if (bd && mc_boot_status && is_dpl_apply_status) + return 0; + err = dpbp_exit(); if (err < 0) { printf("dpbp_exit() failed: %d\n", err); @@ -1511,7 +1518,7 @@ void mc_env_boot(void) * address info properly. Without MAC addresses, the MC code * can not properly initialize the DPC. */ - mc_boot_env_var = getenv(MC_BOOT_ENV_VAR); + mc_boot_env_var = env_get(MC_BOOT_ENV_VAR); if (mc_boot_env_var) run_command_list(mc_boot_env_var, -1, 0); #endif /* CONFIG_FSL_MC_ENET */ diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c index 628b420add..26c714cc04 100644 --- a/drivers/net/fsl_mcdmafec.c +++ b/drivers/net/fsl_mcdmafec.c @@ -383,9 +383,9 @@ static int fec_init(struct eth_device *dev, bd_t * bd) /* Set station address */ if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) - eth_getenv_enetaddr("ethaddr", enetaddr); + eth_env_get_enetaddr("ethaddr", enetaddr); else - eth_getenv_enetaddr("eth1addr", enetaddr); + eth_env_get_enetaddr("eth1addr", enetaddr); fec_set_hwaddr(fecp, enetaddr); /* Set Opcode/Pause Duration Register */ diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c index 5ccc4beda8..d0939e93dc 100644 --- a/drivers/net/ftgmac100.c +++ b/drivers/net/ftgmac100.c @@ -346,7 +346,7 @@ static void ftgmac100_set_mac(struct eth_device *dev, static void ftgmac100_set_mac_from_env(struct eth_device *dev) { - eth_getenv_enetaddr("ethaddr", dev->enetaddr); + eth_env_get_enetaddr("ethaddr", dev->enetaddr); ftgmac100_set_mac(dev, dev->enetaddr); } diff --git a/drivers/net/ftmac100.c b/drivers/net/ftmac100.c index cd24a21f04..f231e6b33b 100644 --- a/drivers/net/ftmac100.c +++ b/drivers/net/ftmac100.c @@ -355,7 +355,7 @@ static int ftmac100_free_pkt(struct udevice *dev, uchar *packet, int length) int ftmac100_read_rom_hwaddr(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); - eth_getenv_enetaddr("ethaddr", pdata->enetaddr); + eth_env_get_enetaddr("ethaddr", pdata->enetaddr); return 0; } diff --git a/drivers/net/gmac_rockchip.c b/drivers/net/gmac_rockchip.c index c9f9e839ba..586ccbff0a 100644 --- a/drivers/net/gmac_rockchip.c +++ b/drivers/net/gmac_rockchip.c @@ -16,6 +16,7 @@ #include <asm/arch/clock.h> #include <asm/arch/hardware.h> #include <asm/arch/grf_rk3288.h> +#include <asm/arch/grf_rk3368.h> #include <asm/arch/grf_rk3399.h> #include <dm/pinctrl.h> #include <dt-bindings/clock/rk3288-cru.h> @@ -83,6 +84,38 @@ static int rk3288_gmac_fix_mac_speed(struct dw_eth_dev *priv) return 0; } +static int rk3368_gmac_fix_mac_speed(struct dw_eth_dev *priv) +{ + struct rk3368_grf *grf; + int clk; + enum { + RK3368_GMAC_CLK_SEL_2_5M = 2 << 4, + RK3368_GMAC_CLK_SEL_25M = 3 << 4, + RK3368_GMAC_CLK_SEL_125M = 0 << 4, + RK3368_GMAC_CLK_SEL_MASK = GENMASK(5, 4), + }; + + switch (priv->phydev->speed) { + case 10: + clk = RK3368_GMAC_CLK_SEL_2_5M; + break; + case 100: + clk = RK3368_GMAC_CLK_SEL_25M; + break; + case 1000: + clk = RK3368_GMAC_CLK_SEL_125M; + break; + default: + debug("Unknown phy speed: %d\n", priv->phydev->speed); + return -EINVAL; + } + + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + rk_clrsetreg(&grf->soc_con15, RK3368_GMAC_CLK_SEL_MASK, clk); + + return 0; +} + static int rk3399_gmac_fix_mac_speed(struct dw_eth_dev *priv) { struct rk3399_grf_regs *grf; @@ -129,6 +162,44 @@ static void rk3288_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) pdata->tx_delay << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT); } +static void rk3368_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) +{ + struct rk3368_grf *grf; + enum { + RK3368_GMAC_PHY_INTF_SEL_RGMII = 1 << 9, + RK3368_GMAC_PHY_INTF_SEL_MASK = GENMASK(11, 9), + RK3368_RMII_MODE_MASK = BIT(6), + RK3368_RMII_MODE = BIT(6), + }; + enum { + RK3368_RXCLK_DLY_ENA_GMAC_MASK = BIT(15), + RK3368_RXCLK_DLY_ENA_GMAC_DISABLE = 0, + RK3368_RXCLK_DLY_ENA_GMAC_ENABLE = BIT(15), + RK3368_TXCLK_DLY_ENA_GMAC_MASK = BIT(7), + RK3368_TXCLK_DLY_ENA_GMAC_DISABLE = 0, + RK3368_TXCLK_DLY_ENA_GMAC_ENABLE = BIT(7), + RK3368_CLK_RX_DL_CFG_GMAC_SHIFT = 8, + RK3368_CLK_RX_DL_CFG_GMAC_MASK = GENMASK(14, 8), + RK3368_CLK_TX_DL_CFG_GMAC_SHIFT = 0, + RK3368_CLK_TX_DL_CFG_GMAC_MASK = GENMASK(6, 0), + }; + + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + rk_clrsetreg(&grf->soc_con15, + RK3368_RMII_MODE_MASK | RK3368_GMAC_PHY_INTF_SEL_MASK, + RK3368_GMAC_PHY_INTF_SEL_RGMII); + + rk_clrsetreg(&grf->soc_con16, + RK3368_RXCLK_DLY_ENA_GMAC_MASK | + RK3368_TXCLK_DLY_ENA_GMAC_MASK | + RK3368_CLK_RX_DL_CFG_GMAC_MASK | + RK3368_CLK_TX_DL_CFG_GMAC_MASK, + RK3368_RXCLK_DLY_ENA_GMAC_ENABLE | + RK3368_TXCLK_DLY_ENA_GMAC_ENABLE | + pdata->rx_delay << RK3368_CLK_RX_DL_CFG_GMAC_SHIFT | + pdata->tx_delay << RK3368_CLK_TX_DL_CFG_GMAC_SHIFT); +} + static void rk3399_gmac_set_to_rgmii(struct gmac_rockchip_platdata *pdata) { struct rk3399_grf_regs *grf; @@ -208,6 +279,11 @@ const struct rk_gmac_ops rk3288_gmac_ops = { .set_to_rgmii = rk3288_gmac_set_to_rgmii, }; +const struct rk_gmac_ops rk3368_gmac_ops = { + .fix_mac_speed = rk3368_gmac_fix_mac_speed, + .set_to_rgmii = rk3368_gmac_set_to_rgmii, +}; + const struct rk_gmac_ops rk3399_gmac_ops = { .fix_mac_speed = rk3399_gmac_fix_mac_speed, .set_to_rgmii = rk3399_gmac_set_to_rgmii, @@ -216,6 +292,8 @@ const struct rk_gmac_ops rk3399_gmac_ops = { static const struct udevice_id rockchip_gmac_ids[] = { { .compatible = "rockchip,rk3288-gmac", .data = (ulong)&rk3288_gmac_ops }, + { .compatible = "rockchip,rk3368-gmac", + .data = (ulong)&rk3368_gmac_ops }, { .compatible = "rockchip,rk3399-gmac", .data = (ulong)&rk3399_gmac_ops }, { } diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c index 3526876d14..a9fc74bdee 100644 --- a/drivers/net/lan91c96.c +++ b/drivers/net/lan91c96.c @@ -704,13 +704,13 @@ static int smc_get_ethaddr(bd_t *bd, struct eth_device *dev) { uchar v_mac[6]; - if (!eth_getenv_enetaddr("ethaddr", v_mac)) { + if (!eth_env_get_enetaddr("ethaddr", v_mac)) { /* get ROM mac value if any */ if (!get_rom_mac(dev, v_mac)) { printf("\n*** ERROR: ethaddr is NOT set !!\n"); return -1; } - eth_setenv_enetaddr("ethaddr", v_mac); + eth_env_set_enetaddr("ethaddr", v_mac); } smc_set_mac_addr(v_mac); /* use old function to update smc default */ diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c index 4e61700d5d..f235b622b6 100644 --- a/drivers/net/ldpaa_eth/ldpaa_eth.c +++ b/drivers/net/ldpaa_eth/ldpaa_eth.c @@ -587,8 +587,10 @@ static void ldpaa_eth_stop(struct eth_device *net_dev) #ifdef CONFIG_PHYLIB if (priv->phydev && bus != NULL) phy_shutdown(priv->phydev); - else + else { free(priv->phydev); + priv->phydev = NULL; + } #endif ldpaa_dpbp_free(); diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index e1b06b25d7..39a6747320 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -428,25 +428,25 @@ int fec_init(struct eth_device *dev, bd_t * bd) if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) { #ifdef CONFIG_SYS_FEC1_IOBASE volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE); - eth_getenv_enetaddr("eth1addr", ea); + eth_env_get_enetaddr("eth1addr", ea); fecp1->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); fecp1->paur = (ea[4] << 24) | (ea[5] << 16); #endif - eth_getenv_enetaddr("ethaddr", ea); + eth_env_get_enetaddr("ethaddr", ea); fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); fecp->paur = (ea[4] << 24) | (ea[5] << 16); } else { #ifdef CONFIG_SYS_FEC0_IOBASE volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE); - eth_getenv_enetaddr("ethaddr", ea); + eth_env_get_enetaddr("ethaddr", ea); fecp0->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); fecp0->paur = (ea[4] << 24) | (ea[5] << 16); #endif #ifdef CONFIG_SYS_FEC1_IOBASE - eth_getenv_enetaddr("eth1addr", ea); + eth_env_get_enetaddr("eth1addr", ea); fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); fecp->paur = (ea[4] << 24) | (ea[5] << 16); diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c index 377d87f04b..fb088e06a4 100644 --- a/drivers/net/ne2000_base.c +++ b/drivers/net/ne2000_base.c @@ -715,15 +715,15 @@ static int ne2k_setup_driver(struct eth_device *dev) * to the MAC address value in the environment, so we do not read * it from the prom or eeprom if it is specified in the environment. */ - if (!eth_getenv_enetaddr("ethaddr", dev->enetaddr)) { + if (!eth_env_get_enetaddr("ethaddr", dev->enetaddr)) { /* If the MAC address is not in the environment, get it: */ if (!get_prom(dev->enetaddr, nic.base)) /* get MAC from prom */ dp83902a_init(dev->enetaddr); /* fallback: seeprom */ /* And write it into the environment otherwise eth_write_hwaddr - * returns -1 due to eth_getenv_enetaddr_by_index() failing, + * returns -1 due to eth_env_get_enetaddr_by_index() failing, * and this causes "Warning: failed to set MAC address", and * cmd_bdinfo has no ethaddr value which it can show: */ - eth_setenv_enetaddr("ethaddr", dev->enetaddr); + eth_env_set_enetaddr("ethaddr", dev->enetaddr); } return 0; } diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 3500047577..e9dbedf326 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -62,8 +62,8 @@ static int is_broadcast(struct in_addr ip) /* update only when the environment has changed */ if (env_changed_id != env_id) { - netmask = getenv_ip("netmask"); - our_ip = getenv_ip("ipaddr"); + netmask = env_get_ip("netmask"); + our_ip = env_get_ip("ipaddr"); env_changed_id = env_id; } @@ -82,11 +82,11 @@ static int refresh_settings_from_env(void) /* update only when the environment has changed */ if (env_changed_id != env_id) { - if (getenv("ncip")) { - nc_ip = getenv_ip("ncip"); + if (env_get("ncip")) { + nc_ip = env_get_ip("ncip"); if (!nc_ip.s_addr) return -1; /* ncip is 0.0.0.0 */ - p = strchr(getenv("ncip"), ':'); + p = strchr(env_get("ncip"), ':'); if (p != NULL) { nc_out_port = simple_strtoul(p + 1, NULL, 10); nc_in_port = nc_out_port; @@ -95,10 +95,10 @@ static int refresh_settings_from_env(void) nc_ip.s_addr = ~0; /* ncip is not set, so broadcast */ } - p = getenv("ncoutport"); + p = env_get("ncoutport"); if (p != NULL) nc_out_port = simple_strtoul(p, NULL, 10); - p = getenv("ncinport"); + p = env_get("ncinport"); if (p != NULL) nc_in_port = simple_strtoul(p, NULL, 10); diff --git a/drivers/net/phy/micrel_ksz90x1.c b/drivers/net/phy/micrel_ksz90x1.c index 20f8a55196..0bb99e6bc6 100644 --- a/drivers/net/phy/micrel_ksz90x1.c +++ b/drivers/net/phy/micrel_ksz90x1.c @@ -258,7 +258,7 @@ static int ksz9021_config(struct phy_device *phydev) if (ret) return ret; - if (getenv("disable_giga")) + if (env_get("disable_giga")) features &= ~(SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); /* force master mode for 1000BaseT due to chip errata */ @@ -344,7 +344,7 @@ static int ksz9031_config(struct phy_device *phydev) return ret; /* add an option to disable the gigabit feature of this PHY */ - if (getenv("disable_giga")) { + if (env_get("disable_giga")) { unsigned features; unsigned bmcr; diff --git a/drivers/net/sandbox-raw.c b/drivers/net/sandbox-raw.c index f5fa0e8533..590ae0c0fc 100644 --- a/drivers/net/sandbox-raw.c +++ b/drivers/net/sandbox-raw.c @@ -33,8 +33,8 @@ static int sb_eth_raw_start(struct udevice *dev) if (strcmp(interface, "lo") == 0) { priv->local = 1; - setenv("ipaddr", "127.0.0.1"); - setenv("serverip", "127.0.0.1"); + env_set("ipaddr", "127.0.0.1"); + env_set("serverip", "127.0.0.1"); } return sandbox_eth_raw_os_start(interface, pdata->enetaddr, priv); } diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index a7c265b980..970d730e56 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -578,7 +578,7 @@ int sh_eth_initialize(bd_t *bd) if (retval < 0) return retval; - if (!eth_getenv_enetaddr("ethaddr", dev->enetaddr)) + if (!eth_env_get_enetaddr("ethaddr", dev->enetaddr)) puts("Please set MAC address\n"); return ret; diff --git a/drivers/nvme/Kconfig b/drivers/nvme/Kconfig new file mode 100644 index 0000000000..cad8dbc97b --- /dev/null +++ b/drivers/nvme/Kconfig @@ -0,0 +1,12 @@ +# +# Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +config NVME + bool "NVM Express device support" + depends on BLK && PCI + help + This option enables support for NVM Express devices. + It supports basic functions of NVMe (read/write). diff --git a/drivers/nvme/Makefile b/drivers/nvme/Makefile new file mode 100644 index 0000000000..1f3010a8c2 --- /dev/null +++ b/drivers/nvme/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += nvme-uclass.o nvme.o nvme_show.o diff --git a/drivers/nvme/nvme-uclass.c b/drivers/nvme/nvme-uclass.c new file mode 100644 index 0000000000..0895bc9c24 --- /dev/null +++ b/drivers/nvme/nvme-uclass.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2017 NXP Semiconductors + * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <dm.h> +#include <dm/device.h> +#include "nvme.h" + +static int nvme_info_init(struct uclass *uc) +{ + struct nvme_info *info = (struct nvme_info *)uc->priv; + + info->ns_num = 0; + info->ndev_num = 0; + INIT_LIST_HEAD(&info->dev_list); + nvme_info = info; + + return 0; +} + +static int nvme_uclass_post_probe(struct udevice *udev) +{ + char name[20]; + char *str; + struct udevice *ns_udev; + int i, ret; + struct nvme_dev *ndev = dev_get_priv(udev); + + /* Create a blk device for each namespace */ + for (i = 0; i < ndev->nn; i++) { + sprintf(name, "nvme-blk#%d", nvme_info->ns_num); + str = strdup(name); + if (!str) + return -ENOMEM; + + /* The real blksz and size will be set by nvme_blk_probe() */ + ret = blk_create_device(udev, "nvme-blk", str, IF_TYPE_NVME, + nvme_info->ns_num++, 512, 0, &ns_udev); + if (ret) { + free(str); + nvme_info->ns_num--; + + return ret; + } + device_set_name_alloced(ns_udev); + } + + return 0; +} + +UCLASS_DRIVER(nvme) = { + .name = "nvme", + .id = UCLASS_NVME, + .init = nvme_info_init, + .post_probe = nvme_uclass_post_probe, + .priv_auto_alloc_size = sizeof(struct nvme_info), +}; diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c new file mode 100644 index 0000000000..151fe92479 --- /dev/null +++ b/drivers/nvme/nvme.c @@ -0,0 +1,860 @@ +/* + * Copyright (C) 2017 NXP Semiconductors + * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <memalign.h> +#include <pci.h> +#include <dm/device-internal.h> +#include "nvme.h" + +struct nvme_info *nvme_info; + +#define NVME_Q_DEPTH 2 +#define NVME_AQ_DEPTH 2 +#define NVME_SQ_SIZE(depth) (depth * sizeof(struct nvme_command)) +#define NVME_CQ_SIZE(depth) (depth * sizeof(struct nvme_completion)) +#define ADMIN_TIMEOUT 60 +#define IO_TIMEOUT 30 +#define MAX_PRP_POOL 512 + +/* + * An NVM Express queue. Each device has at least two (one for admin + * commands and one for I/O commands). + */ +struct nvme_queue { + struct nvme_dev *dev; + struct nvme_command *sq_cmds; + struct nvme_completion *cqes; + wait_queue_head_t sq_full; + u32 __iomem *q_db; + u16 q_depth; + s16 cq_vector; + u16 sq_head; + u16 sq_tail; + u16 cq_head; + u16 qid; + u8 cq_phase; + u8 cqe_seen; + unsigned long cmdid_data[]; +}; + +static int nvme_wait_ready(struct nvme_dev *dev, bool enabled) +{ + u32 bit = enabled ? NVME_CSTS_RDY : 0; + + while ((readl(&dev->bar->csts) & NVME_CSTS_RDY) != bit) + udelay(10000); + + return 0; +} + +static int nvme_setup_prps(struct nvme_dev *dev, u64 *prp2, + int total_len, u64 dma_addr) +{ + u32 page_size = dev->page_size; + int offset = dma_addr & (page_size - 1); + u64 *prp_pool; + int length = total_len; + int i, nprps; + length -= (page_size - offset); + + if (length <= 0) { + *prp2 = 0; + return 0; + } + + if (length) + dma_addr += (page_size - offset); + + if (length <= page_size) { + *prp2 = dma_addr; + return 0; + } + + nprps = DIV_ROUND_UP(length, page_size); + + if (nprps > dev->prp_entry_num) { + free(dev->prp_pool); + dev->prp_pool = malloc(nprps << 3); + if (!dev->prp_pool) { + printf("Error: malloc prp_pool fail\n"); + return -ENOMEM; + } + dev->prp_entry_num = nprps; + } + + prp_pool = dev->prp_pool; + i = 0; + while (nprps) { + if (i == ((page_size >> 3) - 1)) { + *(prp_pool + i) = cpu_to_le64((ulong)prp_pool + + page_size); + i = 0; + prp_pool += page_size; + } + *(prp_pool + i++) = cpu_to_le64(dma_addr); + dma_addr += page_size; + nprps--; + } + *prp2 = (ulong)dev->prp_pool; + + return 0; +} + +static __le16 nvme_get_cmd_id(void) +{ + static unsigned short cmdid; + + return cpu_to_le16((cmdid < USHRT_MAX) ? cmdid++ : 0); +} + +static u16 nvme_read_completion_status(struct nvme_queue *nvmeq, u16 index) +{ + u64 start = (ulong)&nvmeq->cqes[index]; + u64 stop = start + sizeof(struct nvme_completion); + + invalidate_dcache_range(start, stop); + + return le16_to_cpu(readw(&(nvmeq->cqes[index].status))); +} + +/** + * nvme_submit_cmd() - copy a command into a queue and ring the doorbell + * + * @nvmeq: The queue to use + * @cmd: The command to send + */ +static void nvme_submit_cmd(struct nvme_queue *nvmeq, struct nvme_command *cmd) +{ + u16 tail = nvmeq->sq_tail; + + memcpy(&nvmeq->sq_cmds[tail], cmd, sizeof(*cmd)); + flush_dcache_range((ulong)&nvmeq->sq_cmds[tail], + (ulong)&nvmeq->sq_cmds[tail] + sizeof(*cmd)); + + if (++tail == nvmeq->q_depth) + tail = 0; + writel(tail, nvmeq->q_db); + nvmeq->sq_tail = tail; +} + +static int nvme_submit_sync_cmd(struct nvme_queue *nvmeq, + struct nvme_command *cmd, + u32 *result, unsigned timeout) +{ + u16 head = nvmeq->cq_head; + u16 phase = nvmeq->cq_phase; + u16 status; + ulong start_time; + ulong timeout_us = timeout * 100000; + + cmd->common.command_id = nvme_get_cmd_id(); + nvme_submit_cmd(nvmeq, cmd); + + start_time = timer_get_us(); + + for (;;) { + status = nvme_read_completion_status(nvmeq, head); + if ((status & 0x01) == phase) + break; + if (timeout_us > 0 && (timer_get_us() - start_time) + >= timeout_us) + return -ETIMEDOUT; + } + + status >>= 1; + if (status) { + printf("ERROR: status = %x, phase = %d, head = %d\n", + status, phase, head); + status = 0; + if (++head == nvmeq->q_depth) { + head = 0; + phase = !phase; + } + writel(head, nvmeq->q_db + nvmeq->dev->db_stride); + nvmeq->cq_head = head; + nvmeq->cq_phase = phase; + + return -EIO; + } + + if (result) + *result = le32_to_cpu(readl(&(nvmeq->cqes[head].result))); + + if (++head == nvmeq->q_depth) { + head = 0; + phase = !phase; + } + writel(head, nvmeq->q_db + nvmeq->dev->db_stride); + nvmeq->cq_head = head; + nvmeq->cq_phase = phase; + + return status; +} + +static int nvme_submit_admin_cmd(struct nvme_dev *dev, struct nvme_command *cmd, + u32 *result) +{ + return nvme_submit_sync_cmd(dev->queues[0], cmd, result, ADMIN_TIMEOUT); +} + +static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, + int qid, int depth) +{ + struct nvme_queue *nvmeq = malloc(sizeof(*nvmeq)); + if (!nvmeq) + return NULL; + memset(nvmeq, 0, sizeof(*nvmeq)); + + nvmeq->cqes = (void *)memalign(4096, NVME_CQ_SIZE(depth)); + if (!nvmeq->cqes) + goto free_nvmeq; + memset((void *)nvmeq->cqes, 0, NVME_CQ_SIZE(depth)); + + nvmeq->sq_cmds = (void *)memalign(4096, NVME_SQ_SIZE(depth)); + if (!nvmeq->sq_cmds) + goto free_queue; + memset((void *)nvmeq->sq_cmds, 0, NVME_SQ_SIZE(depth)); + + nvmeq->dev = dev; + + nvmeq->cq_head = 0; + nvmeq->cq_phase = 1; + nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride]; + nvmeq->q_depth = depth; + nvmeq->qid = qid; + dev->queue_count++; + dev->queues[qid] = nvmeq; + + return nvmeq; + + free_queue: + free((void *)nvmeq->cqes); + free_nvmeq: + free(nvmeq); + + return NULL; +} + +static int nvme_delete_queue(struct nvme_dev *dev, u8 opcode, u16 id) +{ + struct nvme_command c; + + memset(&c, 0, sizeof(c)); + c.delete_queue.opcode = opcode; + c.delete_queue.qid = cpu_to_le16(id); + + return nvme_submit_admin_cmd(dev, &c, NULL); +} + +static int nvme_delete_sq(struct nvme_dev *dev, u16 sqid) +{ + return nvme_delete_queue(dev, nvme_admin_delete_sq, sqid); +} + +static int nvme_delete_cq(struct nvme_dev *dev, u16 cqid) +{ + return nvme_delete_queue(dev, nvme_admin_delete_cq, cqid); +} + +static int nvme_enable_ctrl(struct nvme_dev *dev) +{ + dev->ctrl_config &= ~NVME_CC_SHN_MASK; + dev->ctrl_config |= NVME_CC_ENABLE; + writel(cpu_to_le32(dev->ctrl_config), &dev->bar->cc); + + return nvme_wait_ready(dev, true); +} + +static int nvme_disable_ctrl(struct nvme_dev *dev) +{ + dev->ctrl_config &= ~NVME_CC_SHN_MASK; + dev->ctrl_config &= ~NVME_CC_ENABLE; + writel(cpu_to_le32(dev->ctrl_config), &dev->bar->cc); + + return nvme_wait_ready(dev, false); +} + +static void nvme_free_queue(struct nvme_queue *nvmeq) +{ + free((void *)nvmeq->cqes); + free(nvmeq->sq_cmds); + free(nvmeq); +} + +static void nvme_free_queues(struct nvme_dev *dev, int lowest) +{ + int i; + + for (i = dev->queue_count - 1; i >= lowest; i--) { + struct nvme_queue *nvmeq = dev->queues[i]; + dev->queue_count--; + dev->queues[i] = NULL; + nvme_free_queue(nvmeq); + } +} + +static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid) +{ + struct nvme_dev *dev = nvmeq->dev; + + nvmeq->sq_tail = 0; + nvmeq->cq_head = 0; + nvmeq->cq_phase = 1; + nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride]; + memset((void *)nvmeq->cqes, 0, NVME_CQ_SIZE(nvmeq->q_depth)); + flush_dcache_range((ulong)nvmeq->cqes, + (ulong)nvmeq->cqes + NVME_CQ_SIZE(nvmeq->q_depth)); + dev->online_queues++; +} + +static int nvme_configure_admin_queue(struct nvme_dev *dev) +{ + int result; + u32 aqa; + u64 cap = nvme_readq(&dev->bar->cap); + struct nvme_queue *nvmeq; + /* most architectures use 4KB as the page size */ + unsigned page_shift = 12; + unsigned dev_page_min = NVME_CAP_MPSMIN(cap) + 12; + unsigned dev_page_max = NVME_CAP_MPSMAX(cap) + 12; + + if (page_shift < dev_page_min) { + debug("Device minimum page size (%u) too large for host (%u)\n", + 1 << dev_page_min, 1 << page_shift); + return -ENODEV; + } + + if (page_shift > dev_page_max) { + debug("Device maximum page size (%u) smaller than host (%u)\n", + 1 << dev_page_max, 1 << page_shift); + page_shift = dev_page_max; + } + + result = nvme_disable_ctrl(dev); + if (result < 0) + return result; + + nvmeq = dev->queues[0]; + if (!nvmeq) { + nvmeq = nvme_alloc_queue(dev, 0, NVME_AQ_DEPTH); + if (!nvmeq) + return -ENOMEM; + } + + aqa = nvmeq->q_depth - 1; + aqa |= aqa << 16; + aqa |= aqa << 16; + + dev->page_size = 1 << page_shift; + + dev->ctrl_config = NVME_CC_CSS_NVM; + dev->ctrl_config |= (page_shift - 12) << NVME_CC_MPS_SHIFT; + dev->ctrl_config |= NVME_CC_ARB_RR | NVME_CC_SHN_NONE; + dev->ctrl_config |= NVME_CC_IOSQES | NVME_CC_IOCQES; + + writel(aqa, &dev->bar->aqa); + nvme_writeq((ulong)nvmeq->sq_cmds, &dev->bar->asq); + nvme_writeq((ulong)nvmeq->cqes, &dev->bar->acq); + + result = nvme_enable_ctrl(dev); + if (result) + goto free_nvmeq; + + nvmeq->cq_vector = 0; + + nvme_init_queue(dev->queues[0], 0); + + return result; + + free_nvmeq: + nvme_free_queues(dev, 0); + + return result; +} + +static int nvme_alloc_cq(struct nvme_dev *dev, u16 qid, + struct nvme_queue *nvmeq) +{ + struct nvme_command c; + int flags = NVME_QUEUE_PHYS_CONTIG | NVME_CQ_IRQ_ENABLED; + + memset(&c, 0, sizeof(c)); + c.create_cq.opcode = nvme_admin_create_cq; + c.create_cq.prp1 = cpu_to_le64((ulong)nvmeq->cqes); + c.create_cq.cqid = cpu_to_le16(qid); + c.create_cq.qsize = cpu_to_le16(nvmeq->q_depth - 1); + c.create_cq.cq_flags = cpu_to_le16(flags); + c.create_cq.irq_vector = cpu_to_le16(nvmeq->cq_vector); + + return nvme_submit_admin_cmd(dev, &c, NULL); +} + +static int nvme_alloc_sq(struct nvme_dev *dev, u16 qid, + struct nvme_queue *nvmeq) +{ + struct nvme_command c; + int flags = NVME_QUEUE_PHYS_CONTIG | NVME_SQ_PRIO_MEDIUM; + + memset(&c, 0, sizeof(c)); + c.create_sq.opcode = nvme_admin_create_sq; + c.create_sq.prp1 = cpu_to_le64((ulong)nvmeq->sq_cmds); + c.create_sq.sqid = cpu_to_le16(qid); + c.create_sq.qsize = cpu_to_le16(nvmeq->q_depth - 1); + c.create_sq.sq_flags = cpu_to_le16(flags); + c.create_sq.cqid = cpu_to_le16(qid); + + return nvme_submit_admin_cmd(dev, &c, NULL); +} + +int nvme_identify(struct nvme_dev *dev, unsigned nsid, + unsigned cns, dma_addr_t dma_addr) +{ + struct nvme_command c; + u32 page_size = dev->page_size; + int offset = dma_addr & (page_size - 1); + int length = sizeof(struct nvme_id_ctrl); + + memset(&c, 0, sizeof(c)); + c.identify.opcode = nvme_admin_identify; + c.identify.nsid = cpu_to_le32(nsid); + c.identify.prp1 = cpu_to_le64(dma_addr); + + length -= (page_size - offset); + if (length <= 0) { + c.identify.prp2 = 0; + } else { + dma_addr += (page_size - offset); + c.identify.prp2 = dma_addr; + } + + c.identify.cns = cpu_to_le32(cns); + + return nvme_submit_admin_cmd(dev, &c, NULL); +} + +int nvme_get_features(struct nvme_dev *dev, unsigned fid, unsigned nsid, + dma_addr_t dma_addr, u32 *result) +{ + struct nvme_command c; + + memset(&c, 0, sizeof(c)); + c.features.opcode = nvme_admin_get_features; + c.features.nsid = cpu_to_le32(nsid); + c.features.prp1 = cpu_to_le64(dma_addr); + c.features.fid = cpu_to_le32(fid); + + return nvme_submit_admin_cmd(dev, &c, result); +} + +int nvme_set_features(struct nvme_dev *dev, unsigned fid, unsigned dword11, + dma_addr_t dma_addr, u32 *result) +{ + struct nvme_command c; + + memset(&c, 0, sizeof(c)); + c.features.opcode = nvme_admin_set_features; + c.features.prp1 = cpu_to_le64(dma_addr); + c.features.fid = cpu_to_le32(fid); + c.features.dword11 = cpu_to_le32(dword11); + + return nvme_submit_admin_cmd(dev, &c, result); +} + +static int nvme_create_queue(struct nvme_queue *nvmeq, int qid) +{ + struct nvme_dev *dev = nvmeq->dev; + int result; + + nvmeq->cq_vector = qid - 1; + result = nvme_alloc_cq(dev, qid, nvmeq); + if (result < 0) + goto release_cq; + + result = nvme_alloc_sq(dev, qid, nvmeq); + if (result < 0) + goto release_sq; + + nvme_init_queue(nvmeq, qid); + + return result; + + release_sq: + nvme_delete_sq(dev, qid); + release_cq: + nvme_delete_cq(dev, qid); + + return result; +} + +static int nvme_set_queue_count(struct nvme_dev *dev, int count) +{ + int status; + u32 result; + u32 q_count = (count - 1) | ((count - 1) << 16); + + status = nvme_set_features(dev, NVME_FEAT_NUM_QUEUES, + q_count, 0, &result); + + if (status < 0) + return status; + if (status > 1) + return 0; + + return min(result & 0xffff, result >> 16) + 1; +} + +static void nvme_create_io_queues(struct nvme_dev *dev) +{ + unsigned int i; + + for (i = dev->queue_count; i <= dev->max_qid; i++) + if (!nvme_alloc_queue(dev, i, dev->q_depth)) + break; + + for (i = dev->online_queues; i <= dev->queue_count - 1; i++) + if (nvme_create_queue(dev->queues[i], i)) + break; +} + +static int nvme_setup_io_queues(struct nvme_dev *dev) +{ + int nr_io_queues; + int result; + + nr_io_queues = 1; + result = nvme_set_queue_count(dev, nr_io_queues); + if (result <= 0) + return result; + + if (result < nr_io_queues) + nr_io_queues = result; + + dev->max_qid = nr_io_queues; + + /* Free previously allocated queues */ + nvme_free_queues(dev, nr_io_queues + 1); + nvme_create_io_queues(dev); + + return 0; +} + +static int nvme_get_info_from_identify(struct nvme_dev *dev) +{ + u16 vendor, device; + struct nvme_id_ctrl buf, *ctrl = &buf; + int ret; + int shift = NVME_CAP_MPSMIN(nvme_readq(&dev->bar->cap)) + 12; + + ret = nvme_identify(dev, 0, 1, (dma_addr_t)ctrl); + if (ret) + return -EIO; + + dev->nn = le32_to_cpu(ctrl->nn); + dev->vwc = ctrl->vwc; + memcpy(dev->serial, ctrl->sn, sizeof(ctrl->sn)); + memcpy(dev->model, ctrl->mn, sizeof(ctrl->mn)); + memcpy(dev->firmware_rev, ctrl->fr, sizeof(ctrl->fr)); + if (ctrl->mdts) + dev->max_transfer_shift = (ctrl->mdts + shift); + else { + /* + * Maximum Data Transfer Size (MDTS) field indicates the maximum + * data transfer size between the host and the controller. The + * host should not submit a command that exceeds this transfer + * size. The value is in units of the minimum memory page size + * and is reported as a power of two (2^n). + * + * The spec also says: a value of 0h indicates no restrictions + * on transfer size. But in nvme_blk_read/write() below we have + * the following algorithm for maximum number of logic blocks + * per transfer: + * + * u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift); + * + * In order for lbas not to overflow, the maximum number is 15 + * which means dev->max_transfer_shift = 15 + 9 (ns->lba_shift). + * Let's use 20 which provides 1MB size. + */ + dev->max_transfer_shift = 20; + } + + /* Apply quirk stuff */ + dm_pci_read_config16(dev->pdev, PCI_VENDOR_ID, &vendor); + dm_pci_read_config16(dev->pdev, PCI_DEVICE_ID, &device); + if ((vendor == PCI_VENDOR_ID_INTEL) && + (device == 0x0953) && ctrl->vs[3]) { + unsigned int max_transfer_shift; + dev->stripe_size = (ctrl->vs[3] + shift); + max_transfer_shift = (ctrl->vs[3] + 18); + if (dev->max_transfer_shift) { + dev->max_transfer_shift = min(max_transfer_shift, + dev->max_transfer_shift); + } else { + dev->max_transfer_shift = max_transfer_shift; + } + } + + return 0; +} + +int nvme_scan_namespace(void) +{ + struct uclass *uc; + struct udevice *dev; + int ret; + + ret = uclass_get(UCLASS_NVME, &uc); + if (ret) + return ret; + + uclass_foreach_dev(dev, uc) { + ret = device_probe(dev); + if (ret) + return ret; + } + + return 0; +} + +static int nvme_blk_probe(struct udevice *udev) +{ + struct nvme_dev *ndev = dev_get_priv(udev->parent); + struct blk_desc *desc = dev_get_uclass_platdata(udev); + struct nvme_ns *ns = dev_get_priv(udev); + u8 flbas; + u16 vendor; + struct nvme_id_ns buf, *id = &buf; + + memset(ns, 0, sizeof(*ns)); + ns->dev = ndev; + ns->ns_id = desc->devnum - ndev->blk_dev_start + 1; + if (nvme_identify(ndev, ns->ns_id, 0, (dma_addr_t)id)) + return -EIO; + + flbas = id->flbas & NVME_NS_FLBAS_LBA_MASK; + ns->flbas = flbas; + ns->lba_shift = id->lbaf[flbas].ds; + ns->mode_select_num_blocks = le64_to_cpu(id->nsze); + ns->mode_select_block_len = 1 << ns->lba_shift; + list_add(&ns->list, &ndev->namespaces); + + desc->lba = ns->mode_select_num_blocks; + desc->log2blksz = ns->lba_shift; + desc->blksz = 1 << ns->lba_shift; + desc->bdev = udev; + dm_pci_read_config16(ndev->pdev, PCI_VENDOR_ID, &vendor); + sprintf(desc->vendor, "0x%.4x", vendor); + memcpy(desc->product, ndev->serial, sizeof(ndev->serial)); + memcpy(desc->revision, ndev->firmware_rev, sizeof(ndev->firmware_rev)); + part_init(desc); + + return 0; +} + +static ulong nvme_blk_read(struct udevice *udev, lbaint_t blknr, + lbaint_t blkcnt, void *buffer) +{ + struct nvme_ns *ns = dev_get_priv(udev); + struct nvme_dev *dev = ns->dev; + struct nvme_command c; + struct blk_desc *desc = dev_get_uclass_platdata(udev); + int status; + u64 prp2; + u64 total_len = blkcnt << desc->log2blksz; + u64 temp_len = total_len; + + u64 slba = blknr; + u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift); + u64 total_lbas = blkcnt; + + c.rw.opcode = nvme_cmd_read; + c.rw.flags = 0; + c.rw.nsid = cpu_to_le32(ns->ns_id); + c.rw.control = 0; + c.rw.dsmgmt = 0; + c.rw.reftag = 0; + c.rw.apptag = 0; + c.rw.appmask = 0; + c.rw.metadata = 0; + + while (total_lbas) { + if (total_lbas < lbas) { + lbas = (u16)total_lbas; + total_lbas = 0; + } else { + total_lbas -= lbas; + } + + if (nvme_setup_prps + (dev, &prp2, lbas << ns->lba_shift, (ulong)buffer)) + return -EIO; + c.rw.slba = cpu_to_le64(slba); + slba += lbas; + c.rw.length = cpu_to_le16(lbas - 1); + c.rw.prp1 = cpu_to_le64((ulong)buffer); + c.rw.prp2 = cpu_to_le64(prp2); + status = nvme_submit_sync_cmd(dev->queues[1], + &c, NULL, IO_TIMEOUT); + if (status) + break; + temp_len -= lbas << ns->lba_shift; + buffer += lbas << ns->lba_shift; + } + + return (total_len - temp_len) >> desc->log2blksz; +} + +static ulong nvme_blk_write(struct udevice *udev, lbaint_t blknr, + lbaint_t blkcnt, const void *buffer) +{ + struct nvme_ns *ns = dev_get_priv(udev); + struct nvme_dev *dev = ns->dev; + struct nvme_command c; + struct blk_desc *desc = dev_get_uclass_platdata(udev); + int status; + u64 prp2; + u64 total_len = blkcnt << desc->log2blksz; + u64 temp_len = total_len; + + u64 slba = blknr; + u16 lbas = 1 << (dev->max_transfer_shift - ns->lba_shift); + u64 total_lbas = blkcnt; + + c.rw.opcode = nvme_cmd_write; + c.rw.flags = 0; + c.rw.nsid = cpu_to_le32(ns->ns_id); + c.rw.control = 0; + c.rw.dsmgmt = 0; + c.rw.reftag = 0; + c.rw.apptag = 0; + c.rw.appmask = 0; + c.rw.metadata = 0; + + while (total_lbas) { + if (total_lbas < lbas) { + lbas = (u16)total_lbas; + total_lbas = 0; + } else { + total_lbas -= lbas; + } + + if (nvme_setup_prps + (dev, &prp2, lbas << ns->lba_shift, (ulong)buffer)) + return -EIO; + c.rw.slba = cpu_to_le64(slba); + slba += lbas; + c.rw.length = cpu_to_le16(lbas - 1); + c.rw.prp1 = cpu_to_le64((ulong)buffer); + c.rw.prp2 = cpu_to_le64(prp2); + status = nvme_submit_sync_cmd(dev->queues[1], + &c, NULL, IO_TIMEOUT); + if (status) + break; + temp_len -= lbas << ns->lba_shift; + buffer += lbas << ns->lba_shift; + } + + return (total_len - temp_len) >> desc->log2blksz; +} + +static const struct blk_ops nvme_blk_ops = { + .read = nvme_blk_read, + .write = nvme_blk_write, +}; + +U_BOOT_DRIVER(nvme_blk) = { + .name = "nvme-blk", + .id = UCLASS_BLK, + .probe = nvme_blk_probe, + .ops = &nvme_blk_ops, + .priv_auto_alloc_size = sizeof(struct nvme_ns), +}; + +static int nvme_bind(struct udevice *udev) +{ + char name[20]; + sprintf(name, "nvme#%d", nvme_info->ndev_num++); + + return device_set_name(udev, name); +} + +static int nvme_probe(struct udevice *udev) +{ + int ret; + struct nvme_dev *ndev = dev_get_priv(udev); + u64 cap; + + ndev->pdev = pci_get_controller(udev); + ndev->instance = trailing_strtol(udev->name); + + INIT_LIST_HEAD(&ndev->namespaces); + ndev->bar = dm_pci_map_bar(udev, PCI_BASE_ADDRESS_0, + PCI_REGION_MEM); + if (readl(&ndev->bar->csts) == -1) { + ret = -ENODEV; + printf("Error: %s: Out of memory!\n", udev->name); + goto free_nvme; + } + + ndev->queues = malloc(2 * sizeof(struct nvme_queue)); + if (!ndev->queues) { + ret = -ENOMEM; + printf("Error: %s: Out of memory!\n", udev->name); + goto free_nvme; + } + memset(ndev->queues, 0, sizeof(2 * sizeof(struct nvme_queue))); + + ndev->prp_pool = malloc(MAX_PRP_POOL); + if (!ndev->prp_pool) { + ret = -ENOMEM; + printf("Error: %s: Out of memory!\n", udev->name); + goto free_nvme; + } + ndev->prp_entry_num = MAX_PRP_POOL >> 3; + + cap = nvme_readq(&ndev->bar->cap); + ndev->q_depth = min_t(int, NVME_CAP_MQES(cap) + 1, NVME_Q_DEPTH); + ndev->db_stride = 1 << NVME_CAP_STRIDE(cap); + ndev->dbs = ((void __iomem *)ndev->bar) + 4096; + + ret = nvme_configure_admin_queue(ndev); + if (ret) + goto free_queue; + + ret = nvme_setup_io_queues(ndev); + if (ret) + goto free_queue; + + nvme_get_info_from_identify(ndev); + ndev->blk_dev_start = nvme_info->ns_num; + list_add(&ndev->node, &nvme_info->dev_list); + + return 0; + +free_queue: + free((void *)ndev->queues); +free_nvme: + return ret; +} + +U_BOOT_DRIVER(nvme) = { + .name = "nvme", + .id = UCLASS_NVME, + .bind = nvme_bind, + .probe = nvme_probe, + .priv_auto_alloc_size = sizeof(struct nvme_dev), +}; + +struct pci_device_id nvme_supported[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, ~0) }, + {} +}; + +U_BOOT_PCI_DEVICE(nvme, nvme_supported); diff --git a/drivers/nvme/nvme.h b/drivers/nvme/nvme.h new file mode 100644 index 0000000000..b7fdd0b8e2 --- /dev/null +++ b/drivers/nvme/nvme.h @@ -0,0 +1,717 @@ +/* + * Copyright (C) 2017 NXP Semiconductors + * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DRIVER_NVME_H__ +#define __DRIVER_NVME_H__ + +#include <asm/io.h> + +struct nvme_id_power_state { + __le16 max_power; /* centiwatts */ + __u8 rsvd2; + __u8 flags; + __le32 entry_lat; /* microseconds */ + __le32 exit_lat; /* microseconds */ + __u8 read_tput; + __u8 read_lat; + __u8 write_tput; + __u8 write_lat; + __le16 idle_power; + __u8 idle_scale; + __u8 rsvd19; + __le16 active_power; + __u8 active_work_scale; + __u8 rsvd23[9]; +}; + +enum { + NVME_PS_FLAGS_MAX_POWER_SCALE = 1 << 0, + NVME_PS_FLAGS_NON_OP_STATE = 1 << 1, +}; + +struct nvme_id_ctrl { + __le16 vid; + __le16 ssvid; + char sn[20]; + char mn[40]; + char fr[8]; + __u8 rab; + __u8 ieee[3]; + __u8 mic; + __u8 mdts; + __u16 cntlid; + __u32 ver; + __u8 rsvd84[172]; + __le16 oacs; + __u8 acl; + __u8 aerl; + __u8 frmw; + __u8 lpa; + __u8 elpe; + __u8 npss; + __u8 avscc; + __u8 apsta; + __le16 wctemp; + __le16 cctemp; + __u8 rsvd270[242]; + __u8 sqes; + __u8 cqes; + __u8 rsvd514[2]; + __le32 nn; + __le16 oncs; + __le16 fuses; + __u8 fna; + __u8 vwc; + __le16 awun; + __le16 awupf; + __u8 nvscc; + __u8 rsvd531; + __le16 acwu; + __u8 rsvd534[2]; + __le32 sgls; + __u8 rsvd540[1508]; + struct nvme_id_power_state psd[32]; + __u8 vs[1024]; +}; + +enum { + NVME_CTRL_ONCS_COMPARE = 1 << 0, + NVME_CTRL_ONCS_WRITE_UNCORRECTABLE = 1 << 1, + NVME_CTRL_ONCS_DSM = 1 << 2, + NVME_CTRL_VWC_PRESENT = 1 << 0, +}; + +struct nvme_lbaf { + __le16 ms; + __u8 ds; + __u8 rp; +}; + +struct nvme_id_ns { + __le64 nsze; + __le64 ncap; + __le64 nuse; + __u8 nsfeat; + __u8 nlbaf; + __u8 flbas; + __u8 mc; + __u8 dpc; + __u8 dps; + __u8 nmic; + __u8 rescap; + __u8 fpi; + __u8 rsvd33; + __le16 nawun; + __le16 nawupf; + __le16 nacwu; + __le16 nabsn; + __le16 nabo; + __le16 nabspf; + __u16 rsvd46; + __le64 nvmcap[2]; + __u8 rsvd64[40]; + __u8 nguid[16]; + __u8 eui64[8]; + struct nvme_lbaf lbaf[16]; + __u8 rsvd192[192]; + __u8 vs[3712]; +}; + +enum { + NVME_NS_FEAT_THIN = 1 << 0, + NVME_NS_FLBAS_LBA_MASK = 0xf, + NVME_NS_FLBAS_META_EXT = 0x10, + NVME_LBAF_RP_BEST = 0, + NVME_LBAF_RP_BETTER = 1, + NVME_LBAF_RP_GOOD = 2, + NVME_LBAF_RP_DEGRADED = 3, + NVME_NS_DPC_PI_LAST = 1 << 4, + NVME_NS_DPC_PI_FIRST = 1 << 3, + NVME_NS_DPC_PI_TYPE3 = 1 << 2, + NVME_NS_DPC_PI_TYPE2 = 1 << 1, + NVME_NS_DPC_PI_TYPE1 = 1 << 0, + NVME_NS_DPS_PI_FIRST = 1 << 3, + NVME_NS_DPS_PI_MASK = 0x7, + NVME_NS_DPS_PI_TYPE1 = 1, + NVME_NS_DPS_PI_TYPE2 = 2, + NVME_NS_DPS_PI_TYPE3 = 3, +}; + +struct nvme_smart_log { + __u8 critical_warning; + __u8 temperature[2]; + __u8 avail_spare; + __u8 spare_thresh; + __u8 percent_used; + __u8 rsvd6[26]; + __u8 data_units_read[16]; + __u8 data_units_written[16]; + __u8 host_reads[16]; + __u8 host_writes[16]; + __u8 ctrl_busy_time[16]; + __u8 power_cycles[16]; + __u8 power_on_hours[16]; + __u8 unsafe_shutdowns[16]; + __u8 media_errors[16]; + __u8 num_err_log_entries[16]; + __le32 warning_temp_time; + __le32 critical_comp_time; + __le16 temp_sensor[8]; + __u8 rsvd216[296]; +}; + +enum { + NVME_SMART_CRIT_SPARE = 1 << 0, + NVME_SMART_CRIT_TEMPERATURE = 1 << 1, + NVME_SMART_CRIT_RELIABILITY = 1 << 2, + NVME_SMART_CRIT_MEDIA = 1 << 3, + NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4, +}; + +struct nvme_lba_range_type { + __u8 type; + __u8 attributes; + __u8 rsvd2[14]; + __u64 slba; + __u64 nlb; + __u8 guid[16]; + __u8 rsvd48[16]; +}; + +enum { + NVME_LBART_TYPE_FS = 0x01, + NVME_LBART_TYPE_RAID = 0x02, + NVME_LBART_TYPE_CACHE = 0x03, + NVME_LBART_TYPE_SWAP = 0x04, + + NVME_LBART_ATTRIB_TEMP = 1 << 0, + NVME_LBART_ATTRIB_HIDE = 1 << 1, +}; + +struct nvme_reservation_status { + __le32 gen; + __u8 rtype; + __u8 regctl[2]; + __u8 resv5[2]; + __u8 ptpls; + __u8 resv10[13]; + struct { + __le16 cntlid; + __u8 rcsts; + __u8 resv3[5]; + __le64 hostid; + __le64 rkey; + } regctl_ds[]; +}; + +/* I/O commands */ + +enum nvme_opcode { + nvme_cmd_flush = 0x00, + nvme_cmd_write = 0x01, + nvme_cmd_read = 0x02, + nvme_cmd_write_uncor = 0x04, + nvme_cmd_compare = 0x05, + nvme_cmd_write_zeroes = 0x08, + nvme_cmd_dsm = 0x09, + nvme_cmd_resv_register = 0x0d, + nvme_cmd_resv_report = 0x0e, + nvme_cmd_resv_acquire = 0x11, + nvme_cmd_resv_release = 0x15, +}; + +struct nvme_common_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __le32 cdw2[2]; + __le64 metadata; + __le64 prp1; + __le64 prp2; + __le32 cdw10[6]; +}; + +struct nvme_rw_command { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2; + __le64 metadata; + __le64 prp1; + __le64 prp2; + __le64 slba; + __le16 length; + __le16 control; + __le32 dsmgmt; + __le32 reftag; + __le16 apptag; + __le16 appmask; +}; + +enum { + NVME_RW_LR = 1 << 15, + NVME_RW_FUA = 1 << 14, + NVME_RW_DSM_FREQ_UNSPEC = 0, + NVME_RW_DSM_FREQ_TYPICAL = 1, + NVME_RW_DSM_FREQ_RARE = 2, + NVME_RW_DSM_FREQ_READS = 3, + NVME_RW_DSM_FREQ_WRITES = 4, + NVME_RW_DSM_FREQ_RW = 5, + NVME_RW_DSM_FREQ_ONCE = 6, + NVME_RW_DSM_FREQ_PREFETCH = 7, + NVME_RW_DSM_FREQ_TEMP = 8, + NVME_RW_DSM_LATENCY_NONE = 0 << 4, + NVME_RW_DSM_LATENCY_IDLE = 1 << 4, + NVME_RW_DSM_LATENCY_NORM = 2 << 4, + NVME_RW_DSM_LATENCY_LOW = 3 << 4, + NVME_RW_DSM_SEQ_REQ = 1 << 6, + NVME_RW_DSM_COMPRESSED = 1 << 7, + NVME_RW_PRINFO_PRCHK_REF = 1 << 10, + NVME_RW_PRINFO_PRCHK_APP = 1 << 11, + NVME_RW_PRINFO_PRCHK_GUARD = 1 << 12, + NVME_RW_PRINFO_PRACT = 1 << 13, +}; + +struct nvme_dsm_cmd { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 nr; + __le32 attributes; + __u32 rsvd12[4]; +}; + +enum { + NVME_DSMGMT_IDR = 1 << 0, + NVME_DSMGMT_IDW = 1 << 1, + NVME_DSMGMT_AD = 1 << 2, +}; + +struct nvme_dsm_range { + __le32 cattr; + __le32 nlb; + __le64 slba; +}; + +/* Admin commands */ + +enum nvme_admin_opcode { + nvme_admin_delete_sq = 0x00, + nvme_admin_create_sq = 0x01, + nvme_admin_get_log_page = 0x02, + nvme_admin_delete_cq = 0x04, + nvme_admin_create_cq = 0x05, + nvme_admin_identify = 0x06, + nvme_admin_abort_cmd = 0x08, + nvme_admin_set_features = 0x09, + nvme_admin_get_features = 0x0a, + nvme_admin_async_event = 0x0c, + nvme_admin_activate_fw = 0x10, + nvme_admin_download_fw = 0x11, + nvme_admin_format_nvm = 0x80, + nvme_admin_security_send = 0x81, + nvme_admin_security_recv = 0x82, +}; + +enum { + NVME_QUEUE_PHYS_CONTIG = (1 << 0), + NVME_CQ_IRQ_ENABLED = (1 << 1), + NVME_SQ_PRIO_URGENT = (0 << 1), + NVME_SQ_PRIO_HIGH = (1 << 1), + NVME_SQ_PRIO_MEDIUM = (2 << 1), + NVME_SQ_PRIO_LOW = (3 << 1), + NVME_FEAT_ARBITRATION = 0x01, + NVME_FEAT_POWER_MGMT = 0x02, + NVME_FEAT_LBA_RANGE = 0x03, + NVME_FEAT_TEMP_THRESH = 0x04, + NVME_FEAT_ERR_RECOVERY = 0x05, + NVME_FEAT_VOLATILE_WC = 0x06, + NVME_FEAT_NUM_QUEUES = 0x07, + NVME_FEAT_IRQ_COALESCE = 0x08, + NVME_FEAT_IRQ_CONFIG = 0x09, + NVME_FEAT_WRITE_ATOMIC = 0x0a, + NVME_FEAT_ASYNC_EVENT = 0x0b, + NVME_FEAT_AUTO_PST = 0x0c, + NVME_FEAT_SW_PROGRESS = 0x80, + NVME_FEAT_HOST_ID = 0x81, + NVME_FEAT_RESV_MASK = 0x82, + NVME_FEAT_RESV_PERSIST = 0x83, + NVME_LOG_ERROR = 0x01, + NVME_LOG_SMART = 0x02, + NVME_LOG_FW_SLOT = 0x03, + NVME_LOG_RESERVATION = 0x80, + NVME_FWACT_REPL = (0 << 3), + NVME_FWACT_REPL_ACTV = (1 << 3), + NVME_FWACT_ACTV = (2 << 3), +}; + +struct nvme_identify { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 cns; + __u32 rsvd11[5]; +}; + +struct nvme_features { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[2]; + __le64 prp1; + __le64 prp2; + __le32 fid; + __le32 dword11; + __u32 rsvd12[4]; +}; + +struct nvme_create_cq { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __u64 rsvd8; + __le16 cqid; + __le16 qsize; + __le16 cq_flags; + __le16 irq_vector; + __u32 rsvd12[4]; +}; + +struct nvme_create_sq { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __u64 rsvd8; + __le16 sqid; + __le16 qsize; + __le16 sq_flags; + __le16 cqid; + __u32 rsvd12[4]; +}; + +struct nvme_delete_queue { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[9]; + __le16 qid; + __u16 rsvd10; + __u32 rsvd11[5]; +}; + +struct nvme_abort_cmd { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[9]; + __le16 sqid; + __u16 cid; + __u32 rsvd11[5]; +}; + +struct nvme_download_firmware { + __u8 opcode; + __u8 flags; + __u16 command_id; + __u32 rsvd1[5]; + __le64 prp1; + __le64 prp2; + __le32 numd; + __le32 offset; + __u32 rsvd12[4]; +}; + +struct nvme_format_cmd { + __u8 opcode; + __u8 flags; + __u16 command_id; + __le32 nsid; + __u64 rsvd2[4]; + __le32 cdw10; + __u32 rsvd11[5]; +}; + +struct nvme_command { + union { + struct nvme_common_command common; + struct nvme_rw_command rw; + struct nvme_identify identify; + struct nvme_features features; + struct nvme_create_cq create_cq; + struct nvme_create_sq create_sq; + struct nvme_delete_queue delete_queue; + struct nvme_download_firmware dlfw; + struct nvme_format_cmd format; + struct nvme_dsm_cmd dsm; + struct nvme_abort_cmd abort; + }; +}; + +enum { + NVME_SC_SUCCESS = 0x0, + NVME_SC_INVALID_OPCODE = 0x1, + NVME_SC_INVALID_FIELD = 0x2, + NVME_SC_CMDID_CONFLICT = 0x3, + NVME_SC_DATA_XFER_ERROR = 0x4, + NVME_SC_POWER_LOSS = 0x5, + NVME_SC_INTERNAL = 0x6, + NVME_SC_ABORT_REQ = 0x7, + NVME_SC_ABORT_QUEUE = 0x8, + NVME_SC_FUSED_FAIL = 0x9, + NVME_SC_FUSED_MISSING = 0xa, + NVME_SC_INVALID_NS = 0xb, + NVME_SC_CMD_SEQ_ERROR = 0xc, + NVME_SC_SGL_INVALID_LAST = 0xd, + NVME_SC_SGL_INVALID_COUNT = 0xe, + NVME_SC_SGL_INVALID_DATA = 0xf, + NVME_SC_SGL_INVALID_METADATA = 0x10, + NVME_SC_SGL_INVALID_TYPE = 0x11, + NVME_SC_LBA_RANGE = 0x80, + NVME_SC_CAP_EXCEEDED = 0x81, + NVME_SC_NS_NOT_READY = 0x82, + NVME_SC_RESERVATION_CONFLICT = 0x83, + NVME_SC_CQ_INVALID = 0x100, + NVME_SC_QID_INVALID = 0x101, + NVME_SC_QUEUE_SIZE = 0x102, + NVME_SC_ABORT_LIMIT = 0x103, + NVME_SC_ABORT_MISSING = 0x104, + NVME_SC_ASYNC_LIMIT = 0x105, + NVME_SC_FIRMWARE_SLOT = 0x106, + NVME_SC_FIRMWARE_IMAGE = 0x107, + NVME_SC_INVALID_VECTOR = 0x108, + NVME_SC_INVALID_LOG_PAGE = 0x109, + NVME_SC_INVALID_FORMAT = 0x10a, + NVME_SC_FIRMWARE_NEEDS_RESET = 0x10b, + NVME_SC_INVALID_QUEUE = 0x10c, + NVME_SC_FEATURE_NOT_SAVEABLE = 0x10d, + NVME_SC_FEATURE_NOT_CHANGEABLE = 0x10e, + NVME_SC_FEATURE_NOT_PER_NS = 0x10f, + NVME_SC_FW_NEEDS_RESET_SUBSYS = 0x110, + NVME_SC_BAD_ATTRIBUTES = 0x180, + NVME_SC_INVALID_PI = 0x181, + NVME_SC_READ_ONLY = 0x182, + NVME_SC_WRITE_FAULT = 0x280, + NVME_SC_READ_ERROR = 0x281, + NVME_SC_GUARD_CHECK = 0x282, + NVME_SC_APPTAG_CHECK = 0x283, + NVME_SC_REFTAG_CHECK = 0x284, + NVME_SC_COMPARE_FAILED = 0x285, + NVME_SC_ACCESS_DENIED = 0x286, + NVME_SC_DNR = 0x4000, +}; + +struct nvme_completion { + __le32 result; /* Used by admin commands to return data */ + __u32 rsvd; + __le16 sq_head; /* how much of this queue may be reclaimed */ + __le16 sq_id; /* submission queue that generated this entry */ + __u16 command_id; /* of the command which completed */ + __le16 status; /* did the command fail, and if so, why? */ +}; + +struct nvme_user_io { + __u8 opcode; + __u8 flags; + __u16 control; + __u16 nblocks; + __u16 rsvd; + __u64 metadata; + __u64 addr; + __u64 slba; + __u32 dsmgmt; + __u32 reftag; + __u16 apptag; + __u16 appmask; +}; + +struct nvme_passthru_cmd { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; + __u64 addr; + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u32 result; +}; + +/* + * Registers should always be accessed with double word or quad word + * accesses. Registers with 64-bit address pointers should be written + * to with dword accesses by writing the low dword first (ptr[0]), + * then the high dword (ptr[1]) second. + */ +static inline u64 nvme_readq(__le64 volatile *regs) +{ +#if BITS_PER_LONG == 64 + return readq(regs); +#else + __u32 *ptr = (__u32 *)regs; + u64 val_lo = readl(ptr); + u64 val_hi = readl(ptr + 1); + + return val_lo + (val_hi << 32); +#endif +} + +static inline void nvme_writeq(const u64 val, __le64 volatile *regs) +{ +#if BITS_PER_LONG == 64 + writeq(val, regs); +#else + __u32 *ptr = (__u32 *)regs; + u32 val_lo = lower_32_bits(val); + u32 val_hi = upper_32_bits(val); + writel(val_lo, ptr); + writel(val_hi, ptr + 1); +#endif +} + +struct nvme_bar { + __u64 cap; /* Controller Capabilities */ + __u32 vs; /* Version */ + __u32 intms; /* Interrupt Mask Set */ + __u32 intmc; /* Interrupt Mask Clear */ + __u32 cc; /* Controller Configuration */ + __u32 rsvd1; /* Reserved */ + __u32 csts; /* Controller Status */ + __u32 rsvd2; /* Reserved */ + __u32 aqa; /* Admin Queue Attributes */ + __u64 asq; /* Admin SQ Base Address */ + __u64 acq; /* Admin CQ Base Address */ +}; + +#define NVME_CAP_MQES(cap) ((cap) & 0xffff) +#define NVME_CAP_TIMEOUT(cap) (((cap) >> 24) & 0xff) +#define NVME_CAP_STRIDE(cap) (((cap) >> 32) & 0xf) +#define NVME_CAP_MPSMIN(cap) (((cap) >> 48) & 0xf) +#define NVME_CAP_MPSMAX(cap) (((cap) >> 52) & 0xf) + +#define NVME_VS(major, minor) (((major) << 16) | ((minor) << 8)) + +enum { + NVME_CC_ENABLE = 1 << 0, + NVME_CC_CSS_NVM = 0 << 4, + NVME_CC_MPS_SHIFT = 7, + NVME_CC_ARB_RR = 0 << 11, + NVME_CC_ARB_WRRU = 1 << 11, + NVME_CC_ARB_VS = 7 << 11, + NVME_CC_SHN_NONE = 0 << 14, + NVME_CC_SHN_NORMAL = 1 << 14, + NVME_CC_SHN_ABRUPT = 2 << 14, + NVME_CC_SHN_MASK = 3 << 14, + NVME_CC_IOSQES = 6 << 16, + NVME_CC_IOCQES = 4 << 20, + NVME_CSTS_RDY = 1 << 0, + NVME_CSTS_CFS = 1 << 1, + NVME_CSTS_SHST_NORMAL = 0 << 2, + NVME_CSTS_SHST_OCCUR = 1 << 2, + NVME_CSTS_SHST_CMPLT = 2 << 2, + NVME_CSTS_SHST_MASK = 3 << 2, +}; + +/* Represents an NVM Express device. Each nvme_dev is a PCI function. */ +struct nvme_dev { + struct list_head node; + struct nvme_queue **queues; + u32 __iomem *dbs; + unsigned int cardnum; + struct udevice *pdev; + pci_dev_t pci_dev; + int instance; + uint8_t *hw_addr; + unsigned queue_count; + unsigned online_queues; + unsigned max_qid; + int q_depth; + u32 db_stride; + u32 ctrl_config; + struct nvme_bar __iomem *bar; + struct list_head namespaces; + const char *name; + char serial[20]; + char model[40]; + char firmware_rev[8]; + u32 max_transfer_shift; + u32 stripe_size; + u32 page_size; + u16 oncs; + u16 abort_limit; + u8 event_limit; + u8 vwc; + u64 *prp_pool; + u32 prp_entry_num; + u32 nn; + u32 blk_dev_start; +}; + +struct nvme_info { + int ns_num; /*the number of nvme namespaces*/ + int ndev_num; /*the number of nvme devices*/ + struct list_head dev_list; +}; + +/* + * The nvme_iod describes the data in an I/O, including the list of PRP + * entries. You can't see it in this data structure because C doesn't let + * me express that. Use nvme_alloc_iod to ensure there's enough space + * allocated to store the PRP list. + */ +struct nvme_iod { + unsigned long private; /* For the use of the submitter of the I/O */ + int npages; /* In the PRP list. 0 means small pool in use */ + int offset; /* Of PRP list */ + int nents; /* Used in scatterlist */ + int length; /* Of data, in bytes */ + dma_addr_t first_dma; +}; + +/* + * An NVM Express namespace is equivalent to a SCSI LUN. + * Each namespace is operated as an independent "device". + */ +struct nvme_ns { + struct list_head list; + struct nvme_dev *dev; + unsigned ns_id; + int devnum; + int lba_shift; + u16 ms; + u8 flbas; + u8 pi_type; + u64 mode_select_num_blocks; + u32 mode_select_block_len; +}; + +extern struct nvme_info *nvme_info; + +#endif /* __DRIVER_NVME_H__ */ diff --git a/drivers/nvme/nvme_show.c b/drivers/nvme/nvme_show.c new file mode 100644 index 0000000000..5577e5de45 --- /dev/null +++ b/drivers/nvme/nvme_show.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2017 NXP Semiconductors + * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <nvme.h> +#include "nvme.h" + +static void print_optional_admin_cmd(u16 oacs, int devnum) +{ + printf("Blk device %d: Optional Admin Command Support:\n", + devnum); + printf("\tNamespace Management/Attachment: %s\n", + oacs & 0x08 ? "yes" : "no"); + printf("\tFirmware Commit/Image download: %s\n", + oacs & 0x04 ? "yes" : "no"); + printf("\tFormat NVM: %s\n", + oacs & 0x02 ? "yes" : "no"); + printf("\tSecurity Send/Receive: %s\n", + oacs & 0x01 ? "yes" : "no"); +} + +static void print_optional_nvm_cmd(u16 oncs, int devnum) +{ + printf("Blk device %d: Optional NVM Command Support:\n", + devnum); + printf("\tReservation: %s\n", + oncs & 0x10 ? "yes" : "no"); + printf("\tSave/Select field in the Set/Get features: %s\n", + oncs & 0x08 ? "yes" : "no"); + printf("\tWrite Zeroes: %s\n", + oncs & 0x04 ? "yes" : "no"); + printf("\tDataset Management: %s\n", + oncs & 0x02 ? "yes" : "no"); + printf("\tWrite Uncorrectable: %s\n", + oncs & 0x01 ? "yes" : "no"); +} + +static void print_format_nvme_attributes(u8 fna, int devnum) +{ + printf("Blk device %d: Format NVM Attributes:\n", devnum); + printf("\tSupport Cryptographic Erase: %s\n", + fna & 0x04 ? "yes" : "No"); + printf("\tSupport erase a particular namespace: %s\n", + fna & 0x02 ? "No" : "Yes"); + printf("\tSupport format a particular namespace: %s\n", + fna & 0x01 ? "No" : "Yes"); +} + +static void print_format(struct nvme_lbaf *lbaf) +{ + u8 str[][10] = {"Best", "Better", "Good", "Degraded"}; + + printf("\t\tMetadata Size: %d\n", le16_to_cpu(lbaf->ms)); + printf("\t\tLBA Data Size: %d\n", 1 << lbaf->ds); + printf("\t\tRelative Performance: %s\n", str[lbaf->rp & 0x03]); +} + +static void print_formats(struct nvme_id_ns *id, struct nvme_ns *ns) +{ + int i; + + printf("Blk device %d: LBA Format Support:\n", ns->devnum); + + for (i = 0; i < id->nlbaf; i++) { + printf("\tLBA Foramt %d Support: ", i); + if (i == ns->flbas) + printf("(current)\n"); + else + printf("\n"); + print_format(id->lbaf + i); + } +} + +static void print_data_protect_cap(u8 dpc, int devnum) +{ + printf("Blk device %d: End-to-End Data", devnum); + printf("Protect Capabilities:\n"); + printf("\tAs last eight bytes: %s\n", + dpc & 0x10 ? "yes" : "No"); + printf("\tAs first eight bytes: %s\n", + dpc & 0x08 ? "yes" : "No"); + printf("\tSupport Type3: %s\n", + dpc & 0x04 ? "yes" : "No"); + printf("\tSupport Type2: %s\n", + dpc & 0x02 ? "yes" : "No"); + printf("\tSupport Type1: %s\n", + dpc & 0x01 ? "yes" : "No"); +} + +static void print_metadata_cap(u8 mc, int devnum) +{ + printf("Blk device %d: Metadata capabilities:\n", devnum); + printf("\tAs part of a separate buffer: %s\n", + mc & 0x02 ? "yes" : "No"); + printf("\tAs part of an extended data LBA: %s\n", + mc & 0x01 ? "yes" : "No"); +} + +int nvme_print_info(struct udevice *udev) +{ + struct nvme_ns *ns = dev_get_priv(udev); + struct nvme_dev *dev = ns->dev; + struct nvme_id_ns buf_ns, *id = &buf_ns; + struct nvme_id_ctrl buf_ctrl, *ctrl = &buf_ctrl; + + if (nvme_identify(dev, 0, 1, (dma_addr_t)ctrl)) + return -EIO; + + print_optional_admin_cmd(le16_to_cpu(ctrl->oacs), ns->devnum); + print_optional_nvm_cmd(le16_to_cpu(ctrl->oncs), ns->devnum); + print_format_nvme_attributes(ctrl->fna, ns->devnum); + + if (nvme_identify(dev, ns->ns_id, 0, (dma_addr_t)id)) + return -EIO; + + print_formats(id, ns); + print_data_protect_cap(id->dpc, ns->devnum); + print_metadata_cap(id->mc, ns->devnum); + + return 0; +} diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index af20cf0f3e..df76a94144 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -390,7 +390,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER /* boot from PCIE --master */ - char *s = getenv("bootmaster"); + char *s = env_get("bootmaster"); char pcie[6]; sprintf(pcie, "PCIE%d", pci_info->pci_num); @@ -673,7 +673,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER } else { /* boot from PCIE --master releases slave's core 0 */ - char *s = getenv("bootmaster"); + char *s = env_get("bootmaster"); char pcie[6]; sprintf(pcie, "PCIE%d", pci_info->pci_num); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6b36c187b5..bbc7dab366 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -427,7 +427,7 @@ int pci_hose_scan(struct pci_controller *hose) if (!gd->pcidelay_done) { /* wait "pcidelay" ms (if defined)... */ - s = getenv("pcidelay"); + s = env_get("pcidelay"); if (s) { int val = simple_strtoul(s, NULL, 10); for (i = 0; i < val; i++) @@ -459,7 +459,7 @@ void pci_init(void) hose_head = NULL; /* allow env to disable pci init/enum */ - if (getenv("pcidisable") != NULL) + if (env_get("pcidisable") != NULL) return; /* now call board specific pci_init()... */ diff --git a/drivers/pci/pci_common.c b/drivers/pci/pci_common.c index 6526de80db..faf25d96cb 100644 --- a/drivers/pci/pci_common.c +++ b/drivers/pci/pci_common.c @@ -89,7 +89,7 @@ __weak int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) /* * Only skip configuration if "pciconfighost" is not set */ - if (getenv("pciconfighost") == NULL) + if (env_get("pciconfighost") == NULL) return 1; #else return 1; diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c index 78cde21cf4..610f85c4e8 100644 --- a/drivers/pci/pcie_layerscape.c +++ b/drivers/pci/pcie_layerscape.c @@ -478,6 +478,7 @@ static int ls_pcie_probe(struct udevice *dev) bool ep_mode; uint svr; int ret; + fdt_size_t cfg_size; pcie->bus = dev; @@ -539,8 +540,10 @@ static int ls_pcie_probe(struct udevice *dev) if (svr == SVR_LS2088A || svr == SVR_LS2084A || svr == SVR_LS2048A || svr == SVR_LS2044A || svr == SVR_LS2081A || svr == SVR_LS2041A) { + cfg_size = fdt_resource_size(&pcie->cfg_res); pcie->cfg_res.start = LS2088A_PCIE1_PHYS_ADDR + LS2088A_PCIE_PHYS_SIZE * pcie->idx; + pcie->cfg_res.end = pcie->cfg_res.start + cfg_size; pcie->ctrl = pcie->lut + 0x40000; } diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index b7e6188429..7d8cb5cb4c 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -5,5 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c deleted file mode 100644 index d83db3f022..0000000000 --- a/drivers/pcmcia/ti_pci1410a.c +++ /dev/null @@ -1,623 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB - * - * SPDX-License-Identifier: GPL-2.0+ - * - ******************************************************************** - * - * Lots of code copied from: - * - * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. - * (C) 1999-2000 Magnus Damm <damm@bitsmart.com> - * - * "The ExCA standard specifies that socket controllers should provide - * two IO and five memory windows per socket, which can be independently - * configured and positioned in the host address space and mapped to - * arbitrary segments of card address space. " - David A Hinds. 1999 - * - * This controller does _not_ meet the ExCA standard. - * - * m8xx pcmcia controller brief info: - * + 8 windows (attrib, mem, i/o) - * + up to two slots (SLOT_A and SLOT_B) - * + inputpins, outputpins, event and mask registers. - * - no offset register. sigh. - * - * Because of the lacking offset register we must map the whole card. - * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. - * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO - * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. - * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. - * They are maximum 64KByte each... - */ - - -#undef DEBUG /**/ - -/* - * PCMCIA support - */ -#include <common.h> -#include <command.h> -#include <config.h> -#include <pci.h> -#include <asm/io.h> - -#include <pcmcia.h> - -#if defined(CONFIG_CMD_PCMCIA) - -int pcmcia_on(int ide_base_bus); - -static int hardware_disable(int slot); -static int hardware_enable(int slot); -static int voltage_set(int slot, int vcc, int vpp); -static void print_funcid(int func); -static void print_fixed(volatile char *p); -static int identify(volatile char *p); -static int check_ide_device(int slot, int ide_base_bus); - - -/* ------------------------------------------------------------------------- */ - - -const char *indent = "\t "; - -/* ------------------------------------------------------------------------- */ - - -static struct pci_device_id supported[] = { - { PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */ - { PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */ - { } -}; - -static pci_dev_t devbusfn; -static u32 socket_base; -static u32 pcmcia_cis_ptr; - -int pcmcia_on(int ide_base_bus) -{ - u16 dev_id; - u32 socket_status; - int slot = 0; - int cis_len; - u16 io_base; - u16 io_len; - - /* - * Find the CardBus PCI device(s). - */ - if ((devbusfn = pci_find_devices(supported, 0)) < 0) { - printf("Ti CardBus: not found\n"); - return 1; - } - - pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id); - - if (dev_id == 0xac56) { - debug("Enable PCMCIA Ti PCI1510\n"); - } else { - debug("Enable PCMCIA Ti PCI1410A\n"); - } - - pcmcia_cis_ptr = CONFIG_SYS_PCMCIA_CIS_WIN; - cis_len = CONFIG_SYS_PCMCIA_CIS_WIN_SIZE; - - io_base = CONFIG_SYS_PCMCIA_IO_WIN; - io_len = CONFIG_SYS_PCMCIA_IO_WIN_SIZE; - - /* - * Setup the PCI device. - */ - pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base); - socket_base &= ~0xf; - - socket_status = readl(socket_base+8); - if ((socket_status & 6) == 0) { - printf("Card Present: "); - - switch (socket_status & 0x3c00) { - - case 0x400: - printf("5V "); - break; - case 0x800: - printf("3.3V "); - break; - case 0xc00: - printf("3.3/5V "); - break; - default: - printf("unsupported Vcc "); - break; - } - switch (socket_status & 0x30) { - case 0x10: - printf("16bit PC-Card\n"); - break; - case 0x20: - printf("32bit CardBus Card\n"); - break; - default: - printf("8bit PC-Card\n"); - break; - } - } - - - writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */ - writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */ - - /* Careful: the linux yenta driver do not seem to reset the offset - * in the i/o windows, so leaving them non-zero is a problem */ - - writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */ - writeb(io_base>>8, socket_base + 0x809); - writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */ - writeb((io_base + io_len - 1)>>8, socket_base + 0x80b); - writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address 0x000 */ - writeb(0x00, socket_base + 0x837); - - - writeb((pcmcia_cis_ptr&0x000ff000) >> 12, - socket_base + 0x810); /* Memory window 0 start address bits 19-12 */ - writeb((pcmcia_cis_ptr&0x00f00000) >> 20, - socket_base + 0x811); /* Memory window 0 start address bits 23-20 */ - writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12, - socket_base + 0x812); /* Memory window 0 end address bits 19-12*/ - writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20, - socket_base + 0x813); /* Memory window 0 end address bits 23-20*/ - writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */ - writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and - * options (read/write, attribute access) */ - writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control */ - writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */ - - writeb((pcmcia_cis_ptr & 0xff000000) >> 24, - socket_base + 0x840); /* Memory window address bits 31-24 */ - - - /* turn off voltage */ - if (voltage_set(slot, 0, 0)) { - return 1; - } - - /* Enable external hardware */ - if (hardware_enable(slot)) { - return 1; - } - - if (check_ide_device(slot, ide_base_bus)) { - return 1; - } - - return 0; -} - -/* ------------------------------------------------------------------------- */ - - -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_off (void) -{ - int slot = 0; - - writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */ - - writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */ - writeb(0x00, socket_base + 0x809); - writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */ - writeb(0x00, socket_base + 0x80b); - writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address */ - writeb(0x00, socket_base + 0x837); - - writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address */ - writeb(0x00, socket_base + 0x80d); - writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address */ - writeb(0x00, socket_base + 0x80f); - writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address */ - writeb(0x00, socket_base + 0x839); - - writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */ - writeb(0x00, socket_base + 0x811); - writeb(0x00, socket_base + 0x812); /* Memory window 0 end address */ - writeb(0x00, socket_base + 0x813); - writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */ - writeb(0x00, socket_base + 0x815); - - writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */ - - - /* turn off voltage */ - voltage_set(slot, 0, 0); - - /* disable external hardware */ - printf ("Shutdown and Poweroff Ti PCI1410A\n"); - hardware_disable(slot); - - return 0; -} - -#endif - -/* ------------------------------------------------------------------------- */ - - -#define MAX_TUPEL_SZ 512 -#define MAX_FEATURES 4 -int ide_devices_found; -static int check_ide_device(int slot, int ide_base_bus) -{ - volatile char *ident = NULL; - volatile char *feature_p[MAX_FEATURES]; - volatile char *p, *start; - int n_features = 0; - uchar func_id = ~0; - uchar code, len; - ushort config_base = 0; - int found = 0; - int i; - u32 socket_status; - - debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr); - - socket_status = readl(socket_base+8); - - if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) { - printf("no card or CardBus card\n"); - return 1; - } - - start = p = (volatile char *) pcmcia_cis_ptr; - - while ((p - start) < MAX_TUPEL_SZ) { - - code = *p; p += 2; - - if (code == 0xFF) { /* End of chain */ - break; - } - - len = *p; p += 2; -#if defined(DEBUG) && (DEBUG > 1) - { - volatile uchar *q = p; - printf ("\nTuple code %02x length %d\n\tData:", - code, len); - - for (i = 0; i < len; ++i) { - printf (" %02x", *q); - q+= 2; - } - } -#endif /* DEBUG */ - switch (code) { - case CISTPL_VERS_1: - ident = p + 4; - break; - case CISTPL_FUNCID: - /* Fix for broken SanDisk which may have 0x80 bit set */ - func_id = *p & 0x7F; - break; - case CISTPL_FUNCE: - if (n_features < MAX_FEATURES) - feature_p[n_features++] = p; - break; - case CISTPL_CONFIG: - config_base = (*(p+6) << 8) + (*(p+4)); - debug ("\n## Config_base = %04x ###\n", config_base); - default: - break; - } - p += 2 * len; - } - - found = identify(ident); - - if (func_id != ((uchar)~0)) { - print_funcid (func_id); - - if (func_id == CISTPL_FUNCID_FIXED) - found = 1; - else - return 1; /* no disk drive */ - } - - for (i=0; i<n_features; ++i) { - print_fixed(feature_p[i]); - } - - if (!found) { - printf("unknown card type\n"); - return 1; - } - - /* select config index 1 */ - writeb(1, pcmcia_cis_ptr + config_base); - -#if 0 - printf("Confiuration Option Register: %02x\n", readb(pcmcia_cis_ptr + config_base)); - printf("Card Confiuration and Status Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 2)); - printf("Pin Replacement Register Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 4)); - printf("Socket and Copy Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 6)); -#endif - ide_devices_found |= (1 << (slot+ide_base_bus)); - - return 0; -} - - -static int voltage_set(int slot, int vcc, int vpp) -{ - u32 socket_control; - int reg=0; - - switch (slot) { - case 0: - reg = socket_base + 0x10; - break; - default: - return 1; - } - - socket_control = 0; - - - switch (vcc) { - case 50: - socket_control |= 0x20; - break; - case 33: - socket_control |= 0x30; - break; - case 0: - default: ; - } - - switch (vpp) { - case 120: - socket_control |= 0x1; - break; - case 50: - socket_control |= 0x2; - break; - case 33: - socket_control |= 0x3; - break; - case 0: - default: ; - } - - writel(socket_control, reg); - - debug ("voltage_set: Ti PCI1410A Slot %d, Vcc=%d.%d, Vpp=%d.%d\n", - slot, vcc/10, vcc%10, vpp/10, vpp%10); - - udelay(500); - return 0; -} - - -static int hardware_enable(int slot) -{ - u32 socket_status; - u16 brg_ctrl; - int is_82365sl; - - socket_status = readl(socket_base+8); - - if ((socket_status & 6) == 0) { - - switch (socket_status & 0x3c00) { - - case 0x400: - printf("5V "); - voltage_set(slot, 50, 0); - break; - case 0x800: - voltage_set(slot, 33, 0); - break; - case 0xc00: - voltage_set(slot, 33, 0); - break; - default: - voltage_set(slot, 0, 0); - break; - } - } else { - voltage_set(slot, 0, 0); - } - - pci_read_config_word(devbusfn, PCI_BRIDGE_CONTROL, &brg_ctrl); - brg_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; - pci_write_config_word(devbusfn, PCI_BRIDGE_CONTROL, brg_ctrl); - is_82365sl = ((readb(socket_base+0x800) & 0x0f) == 2); - writeb(is_82365sl?0x90:0x98, socket_base+0x802); - writeb(0x67, socket_base+0x803); - udelay(100000); -#if 0 - printf("ExCA Id %02x, Card Status %02x, Power config %02x, Interrupt Config %02x, bridge control %04x %d\n", - readb(socket_base+0x800), readb(socket_base+0x801), - readb(socket_base+0x802), readb(socket_base+0x803), brg_ctrl, is_82365sl); -#endif - - return ((readb(socket_base+0x801)&0x6c)==0x6c)?0:1; -} - - -static int hardware_disable(int slot) -{ - voltage_set(slot, 0, 0); - return 0; -} - -static void print_funcid(int func) -{ - puts(indent); - switch (func) { - case CISTPL_FUNCID_MULTI: - puts(" Multi-Function"); - break; - case CISTPL_FUNCID_MEMORY: - puts(" Memory"); - break; - case CISTPL_FUNCID_SERIAL: - puts(" Serial Port"); - break; - case CISTPL_FUNCID_PARALLEL: - puts(" Parallel Port"); - break; - case CISTPL_FUNCID_FIXED: - puts(" Fixed Disk"); - break; - case CISTPL_FUNCID_VIDEO: - puts(" Video Adapter"); - break; - case CISTPL_FUNCID_NETWORK: - puts(" Network Adapter"); - break; - case CISTPL_FUNCID_AIMS: - puts(" AIMS Card"); - break; - case CISTPL_FUNCID_SCSI: - puts(" SCSI Adapter"); - break; - default: - puts(" Unknown"); - break; - } - puts(" Card\n"); -} - -/* ------------------------------------------------------------------------- */ - -static void print_fixed(volatile char *p) -{ - if (p == NULL) - return; - - puts(indent); - - switch (*p) { - case CISTPL_FUNCE_IDE_IFACE: - { uchar iface = *(p+2); - - puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown"); - puts (" interface "); - break; - } - case CISTPL_FUNCE_IDE_MASTER: - case CISTPL_FUNCE_IDE_SLAVE: - { - uchar f1 = *(p+2); - uchar f2 = *(p+4); - - puts((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]"); - - if (f1 & CISTPL_IDE_UNIQUE) { - puts(" [unique]"); - } - - puts((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]"); - - if (f2 & CISTPL_IDE_HAS_SLEEP) { - puts(" [sleep]"); - } - - if (f2 & CISTPL_IDE_HAS_STANDBY) { - puts(" [standby]"); - } - - if (f2 & CISTPL_IDE_HAS_IDLE) { - puts(" [idle]"); - } - - if (f2 & CISTPL_IDE_LOW_POWER) { - puts(" [low power]"); - } - - if (f2 & CISTPL_IDE_REG_INHIBIT) { - puts(" [reg inhibit]"); - } - - if (f2 & CISTPL_IDE_HAS_INDEX) { - puts(" [index]"); - } - - if (f2 & CISTPL_IDE_IOIS16) { - puts(" [IOis16]"); - } - - break; - } - } - putc('\n'); -} - -/* ------------------------------------------------------------------------- */ - -#define MAX_IDENT_CHARS 64 -#define MAX_IDENT_FIELDS 4 - -static char *known_cards[] = { - "ARGOSY PnPIDE D5", - NULL -}; - -static int identify(volatile char *p) -{ - char id_str[MAX_IDENT_CHARS]; - char data; - char *t; - char **card; - int i, done; - - if (p == NULL) - return (0); /* Don't know */ - - t = id_str; - done =0; - - for (i=0; i<=4 && !done; ++i, p+=2) { - while ((data = *p) != '\0') { - if (data == 0xFF) { - done = 1; - break; - } - *t++ = data; - if (t == &id_str[MAX_IDENT_CHARS-1]) { - done = 1; - break; - } - p += 2; - } - if (!done) - *t++ = ' '; - } - *t = '\0'; - while (--t > id_str) { - if (*t == ' ') { - *t = '\0'; - } else { - break; - } - } - puts(id_str); - putc('\n'); - - for (card=known_cards; *card; ++card) { - debug ("## Compare against \"%s\"\n", *card); - if (strcmp(*card, id_str) == 0) { /* found! */ - debug ("## CARD FOUND ##\n"); - return 1; - } - } - - return 0; /* don't know */ -} - -#endif /* CONFIG_CMD_PCMCIA */ diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3368.c b/drivers/pinctrl/rockchip/pinctrl_rk3368.c index bdf0758c0c..81ce2e31a7 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3368.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3368.c @@ -1,8 +1,11 @@ /* * (C) Copyright 2017 Rockchip Electronics Co., Ltd * Author: Andy Yan <andy.yan@rock-chips.com> + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * * SPDX-License-Identifier: GPL-2.0+ */ + #include <common.h> #include <dm.h> #include <errno.h> @@ -16,6 +19,428 @@ DECLARE_GLOBAL_DATA_PTR; +/* PMUGRF_GPIO0B_IOMUX */ +enum { + GPIO0B5_SHIFT = 10, + GPIO0B5_MASK = GENMASK(GPIO0B5_SHIFT + 1, GPIO0B5_SHIFT), + GPIO0B5_GPIO = 0, + GPIO0B5_SPI2_CSN0 = (2 << GPIO0B5_SHIFT), + + GPIO0B4_SHIFT = 8, + GPIO0B4_MASK = GENMASK(GPIO0B4_SHIFT + 1, GPIO0B4_SHIFT), + GPIO0B4_GPIO = 0, + GPIO0B4_SPI2_CLK = (2 << GPIO0B4_SHIFT), + + GPIO0B3_SHIFT = 6, + GPIO0B3_MASK = GENMASK(GPIO0B3_SHIFT + 1, GPIO0B3_SHIFT), + GPIO0B3_GPIO = 0, + GPIO0B3_SPI2_TXD = (2 << GPIO0B3_SHIFT), + + GPIO0B2_SHIFT = 4, + GPIO0B2_MASK = GENMASK(GPIO0B2_SHIFT + 1, GPIO0B2_SHIFT), + GPIO0B2_GPIO = 0, + GPIO0B2_SPI2_RXD = (2 << GPIO0B2_SHIFT), +}; + +/*GRF_GPIO0C_IOMUX*/ +enum { + GPIO0C7_SHIFT = 14, + GPIO0C7_MASK = GENMASK(GPIO0C7_SHIFT + 1, GPIO0C7_SHIFT), + GPIO0C7_GPIO = 0, + GPIO0C7_LCDC_D19 = (1 << GPIO0C7_SHIFT), + GPIO0C7_TRACE_D9 = (2 << GPIO0C7_SHIFT), + GPIO0C7_UART1_RTSN = (3 << GPIO0C7_SHIFT), + + GPIO0C6_SHIFT = 12, + GPIO0C6_MASK = GENMASK(GPIO0C6_SHIFT + 1, GPIO0C6_SHIFT), + GPIO0C6_GPIO = 0, + GPIO0C6_LCDC_D18 = (1 << GPIO0C6_SHIFT), + GPIO0C6_TRACE_D8 = (2 << GPIO0C6_SHIFT), + GPIO0C6_UART1_CTSN = (3 << GPIO0C6_SHIFT), + + GPIO0C5_SHIFT = 10, + GPIO0C5_MASK = GENMASK(GPIO0C5_SHIFT + 1, GPIO0C5_SHIFT), + GPIO0C5_GPIO = 0, + GPIO0C5_LCDC_D17 = (1 << GPIO0C5_SHIFT), + GPIO0C5_TRACE_D7 = (2 << GPIO0C5_SHIFT), + GPIO0C5_UART1_SOUT = (3 << GPIO0C5_SHIFT), + + GPIO0C4_SHIFT = 8, + GPIO0C4_MASK = GENMASK(GPIO0C4_SHIFT + 1, GPIO0C4_SHIFT), + GPIO0C4_GPIO = 0, + GPIO0C4_LCDC_D16 = (1 << GPIO0C4_SHIFT), + GPIO0C4_TRACE_D6 = (2 << GPIO0C4_SHIFT), + GPIO0C4_UART1_SIN = (3 << GPIO0C4_SHIFT), + + GPIO0C3_SHIFT = 6, + GPIO0C3_MASK = GENMASK(GPIO0C3_SHIFT + 1, GPIO0C3_SHIFT), + GPIO0C3_GPIO = 0, + GPIO0C3_LCDC_D15 = (1 << GPIO0C3_SHIFT), + GPIO0C3_TRACE_D5 = (2 << GPIO0C3_SHIFT), + GPIO0C3_MCU_JTAG_TDO = (3 << GPIO0C3_SHIFT), + + GPIO0C2_SHIFT = 4, + GPIO0C2_MASK = GENMASK(GPIO0C2_SHIFT + 1, GPIO0C2_SHIFT), + GPIO0C2_GPIO = 0, + GPIO0C2_LCDC_D14 = (1 << GPIO0C2_SHIFT), + GPIO0C2_TRACE_D4 = (2 << GPIO0C2_SHIFT), + GPIO0C2_MCU_JTAG_TDI = (3 << GPIO0C2_SHIFT), + + GPIO0C1_SHIFT = 2, + GPIO0C1_MASK = GENMASK(GPIO0C1_SHIFT + 1, GPIO0C1_SHIFT), + GPIO0C1_GPIO = 0, + GPIO0C1_LCDC_D13 = (1 << GPIO0C1_SHIFT), + GPIO0C1_TRACE_D3 = (2 << GPIO0C1_SHIFT), + GPIO0C1_MCU_JTAG_TRTSN = (3 << GPIO0C1_SHIFT), + + GPIO0C0_SHIFT = 0, + GPIO0C0_MASK = GENMASK(GPIO0C0_SHIFT + 1, GPIO0C0_SHIFT), + GPIO0C0_GPIO = 0, + GPIO0C0_LCDC_D12 = (1 << GPIO0C0_SHIFT), + GPIO0C0_TRACE_D2 = (2 << GPIO0C0_SHIFT), + GPIO0C0_MCU_JTAG_TDO = (3 << GPIO0C0_SHIFT), +}; + +/*GRF_GPIO0D_IOMUX*/ +enum { + GPIO0D7_SHIFT = 14, + GPIO0D7_MASK = GENMASK(GPIO0D7_SHIFT + 1, GPIO0D7_SHIFT), + GPIO0D7_GPIO = 0, + GPIO0D7_LCDC_DCLK = (1 << GPIO0D7_SHIFT), + GPIO0D7_TRACE_CTL = (2 << GPIO0D7_SHIFT), + GPIO0D7_PMU_DEBUG5 = (3 << GPIO0D7_SHIFT), + + GPIO0D6_SHIFT = 12, + GPIO0D6_MASK = GENMASK(GPIO0D6_SHIFT + 1, GPIO0D6_SHIFT), + GPIO0D6_GPIO = 0, + GPIO0D6_LCDC_DEN = (1 << GPIO0D6_SHIFT), + GPIO0D6_TRACE_CLK = (2 << GPIO0D6_SHIFT), + GPIO0D6_PMU_DEBUG4 = (3 << GPIO0D6_SHIFT), + + GPIO0D5_SHIFT = 10, + GPIO0D5_MASK = GENMASK(GPIO0D5_SHIFT + 1, GPIO0D5_SHIFT), + GPIO0D5_GPIO = 0, + GPIO0D5_LCDC_VSYNC = (1 << GPIO0D5_SHIFT), + GPIO0D5_TRACE_D15 = (2 << GPIO0D5_SHIFT), + GPIO0D5_PMU_DEBUG3 = (3 << GPIO0D5_SHIFT), + + GPIO0D4_SHIFT = 8, + GPIO0D4_MASK = GENMASK(GPIO0D4_SHIFT + 1, GPIO0D4_SHIFT), + GPIO0D4_GPIO = 0, + GPIO0D4_LCDC_HSYNC = (1 << GPIO0D4_SHIFT), + GPIO0D4_TRACE_D14 = (2 << GPIO0D4_SHIFT), + GPIO0D4_PMU_DEBUG2 = (3 << GPIO0D4_SHIFT), + + GPIO0D3_SHIFT = 6, + GPIO0D3_MASK = GENMASK(GPIO0D3_SHIFT + 1, GPIO0D3_SHIFT), + GPIO0D3_GPIO = 0, + GPIO0D3_LCDC_D23 = (1 << GPIO0D3_SHIFT), + GPIO0D3_TRACE_D13 = (2 << GPIO0D3_SHIFT), + GPIO0D3_UART4_SIN = (3 << GPIO0D3_SHIFT), + + GPIO0D2_SHIFT = 4, + GPIO0D2_MASK = GENMASK(GPIO0D2_SHIFT + 1, GPIO0D2_SHIFT), + GPIO0D2_GPIO = 0, + GPIO0D2_LCDC_D22 = (1 << GPIO0D2_SHIFT), + GPIO0D2_TRACE_D12 = (2 << GPIO0D2_SHIFT), + GPIO0D2_UART4_SOUT = (3 << GPIO0D2_SHIFT), + + GPIO0D1_SHIFT = 2, + GPIO0D1_MASK = GENMASK(GPIO0D1_SHIFT + 1, GPIO0D1_SHIFT), + GPIO0D1_GPIO = 0, + GPIO0D1_LCDC_D21 = (1 << GPIO0D1_SHIFT), + GPIO0D1_TRACE_D11 = (2 << GPIO0D1_SHIFT), + GPIO0D1_UART4_RTSN = (3 << GPIO0D1_SHIFT), + + GPIO0D0_SHIFT = 0, + GPIO0D0_MASK = GENMASK(GPIO0D0_SHIFT + 1, GPIO0D0_SHIFT), + GPIO0D0_GPIO = 0, + GPIO0D0_LCDC_D20 = (1 << GPIO0D0_SHIFT), + GPIO0D0_TRACE_D10 = (2 << GPIO0D0_SHIFT), + GPIO0D0_UART4_CTSN = (3 << GPIO0D0_SHIFT), +}; + +/*GRF_GPIO2A_IOMUX*/ +enum { + GPIO2A7_SHIFT = 14, + GPIO2A7_MASK = GENMASK(GPIO2A7_SHIFT + 1, GPIO2A7_SHIFT), + GPIO2A7_GPIO = 0, + GPIO2A7_SDMMC0_D2 = (1 << GPIO2A7_SHIFT), + GPIO2A7_JTAG_TCK = (2 << GPIO2A7_SHIFT), + + GPIO2A6_SHIFT = 12, + GPIO2A6_MASK = GENMASK(GPIO2A6_SHIFT + 1, GPIO2A6_SHIFT), + GPIO2A6_GPIO = 0, + GPIO2A6_SDMMC0_D1 = (1 << GPIO2A6_SHIFT), + GPIO2A6_UART2_SIN = (2 << GPIO2A6_SHIFT), + + GPIO2A5_SHIFT = 10, + GPIO2A5_MASK = GENMASK(GPIO2A5_SHIFT + 1, GPIO2A5_SHIFT), + GPIO2A5_GPIO = 0, + GPIO2A5_SDMMC0_D0 = (1 << GPIO2A5_SHIFT), + GPIO2A5_UART2_SOUT = (2 << GPIO2A5_SHIFT), + + GPIO2A4_SHIFT = 8, + GPIO2A4_MASK = GENMASK(GPIO2A4_SHIFT + 1, GPIO2A4_SHIFT), + GPIO2A4_GPIO = 0, + GPIO2A4_FLASH_DQS = (1 << GPIO2A4_SHIFT), + GPIO2A4_EMMC_CLKOUT = (2 << GPIO2A4_SHIFT), + + GPIO2A3_SHIFT = 6, + GPIO2A3_MASK = GENMASK(GPIO2A3_SHIFT + 1, GPIO2A3_SHIFT), + GPIO2A3_GPIO = 0, + GPIO2A3_FLASH_CSN3 = (1 << GPIO2A3_SHIFT), + GPIO2A3_EMMC_RSTNOUT = (2 << GPIO2A3_SHIFT), + + GPIO2A2_SHIFT = 4, + GPIO2A2_MASK = GENMASK(GPIO2A2_SHIFT + 1, GPIO2A2_SHIFT), + GPIO2A2_GPIO = 0, + GPIO2A2_FLASH_CSN2 = (1 << GPIO2A2_SHIFT), + + GPIO2A1_SHIFT = 2, + GPIO2A1_MASK = GENMASK(GPIO2A1_SHIFT + 1, GPIO2A1_SHIFT), + GPIO2A1_GPIO = 0, + GPIO2A1_FLASH_CSN1 = (1 << GPIO2A1_SHIFT), + + GPIO2A0_SHIFT = 0, + GPIO2A0_MASK = GENMASK(GPIO2A0_SHIFT + 1, GPIO2A0_SHIFT), + GPIO2A0_GPIO = 0, + GPIO2A0_FLASH_CSN0 = (1 << GPIO2A0_SHIFT), +}; + +/*GRF_GPIO2D_IOMUX*/ +enum { + GPIO2D7_SHIFT = 14, + GPIO2D7_MASK = GENMASK(GPIO2D7_SHIFT + 1, GPIO2D7_SHIFT), + GPIO2D7_GPIO = 0, + GPIO2D7_SDIO0_D3 = (1 << GPIO2D7_SHIFT), + + GPIO2D6_SHIFT = 12, + GPIO2D6_MASK = GENMASK(GPIO2D6_SHIFT + 1, GPIO2D6_SHIFT), + GPIO2D6_GPIO = 0, + GPIO2D6_SDIO0_D2 = (1 << GPIO2D6_SHIFT), + + GPIO2D5_SHIFT = 10, + GPIO2D5_MASK = GENMASK(GPIO2D5_SHIFT + 1, GPIO2D5_SHIFT), + GPIO2D5_GPIO = 0, + GPIO2D5_SDIO0_D1 = (1 << GPIO2D5_SHIFT), + + GPIO2D4_SHIFT = 8, + GPIO2D4_MASK = GENMASK(GPIO2D4_SHIFT + 1, GPIO2D4_SHIFT), + GPIO2D4_GPIO = 0, + GPIO2D4_SDIO0_D0 = (1 << GPIO2D4_SHIFT), + + GPIO2D3_SHIFT = 6, + GPIO2D3_MASK = GENMASK(GPIO2D3_SHIFT + 1, GPIO2D3_SHIFT), + GPIO2D3_GPIO = 0, + GPIO2D3_UART0_RTS0 = (1 << GPIO2D3_SHIFT), + + GPIO2D2_SHIFT = 4, + GPIO2D2_MASK = GENMASK(GPIO2D2_SHIFT + 1, GPIO2D2_SHIFT), + GPIO2D2_GPIO = 0, + GPIO2D2_UART0_CTS0 = (1 << GPIO2D2_SHIFT), + + GPIO2D1_SHIFT = 2, + GPIO2D1_MASK = GENMASK(GPIO2D1_SHIFT + 1, GPIO2D1_SHIFT), + GPIO2D1_GPIO = 0, + GPIO2D1_UART0_SOUT = (1 << GPIO2D1_SHIFT), + + GPIO2D0_SHIFT = 0, + GPIO2D0_MASK = GENMASK(GPIO2D0_SHIFT + 1, GPIO2D0_SHIFT), + GPIO2D0_GPIO = 0, + GPIO2D0_UART0_SIN = (1 << GPIO2D0_SHIFT), +}; + +/* GRF_GPIO1B_IOMUX */ +enum { + GPIO1B7_SHIFT = 14, + GPIO1B7_MASK = GENMASK(GPIO1B7_SHIFT + 1, GPIO1B7_SHIFT), + GPIO1B7_GPIO = 0, + GPIO1B7_SPI1_CSN0 = (2 << GPIO1B7_SHIFT), + + GPIO1B6_SHIFT = 12, + GPIO1B6_MASK = GENMASK(GPIO1B6_SHIFT + 1, GPIO1B6_SHIFT), + GPIO1B6_GPIO = 0, + GPIO1B6_SPI1_CLK = (2 << GPIO1B6_SHIFT), +}; + +/* GRF_GPIO1C_IOMUX */ +enum { + GPIO1C7_SHIFT = 14, + GPIO1C7_MASK = GENMASK(GPIO1C7_SHIFT + 1, GPIO1C7_SHIFT), + GPIO1C7_GPIO = 0, + GPIO1C7_EMMC_DATA5 = (2 << GPIO1C7_SHIFT), + GPIO1C7_SPI0_TXD = (3 << GPIO1C7_SHIFT), + + GPIO1C6_SHIFT = 12, + GPIO1C6_MASK = GENMASK(GPIO1C6_SHIFT + 1, GPIO1C6_SHIFT), + GPIO1C6_GPIO = 0, + GPIO1C6_EMMC_DATA4 = (2 << GPIO1C6_SHIFT), + GPIO1C6_SPI0_RXD = (3 << GPIO1C6_SHIFT), + + GPIO1C5_SHIFT = 10, + GPIO1C5_MASK = GENMASK(GPIO1C5_SHIFT + 1, GPIO1C5_SHIFT), + GPIO1C5_GPIO = 0, + GPIO1C5_EMMC_DATA3 = (2 << GPIO1C5_SHIFT), + + GPIO1C4_SHIFT = 8, + GPIO1C4_MASK = GENMASK(GPIO1C4_SHIFT + 1, GPIO1C4_SHIFT), + GPIO1C4_GPIO = 0, + GPIO1C4_EMMC_DATA2 = (2 << GPIO1C4_SHIFT), + + GPIO1C3_SHIFT = 6, + GPIO1C3_MASK = GENMASK(GPIO1C3_SHIFT + 1, GPIO1C3_SHIFT), + GPIO1C3_GPIO = 0, + GPIO1C3_EMMC_DATA1 = (2 << GPIO1C3_SHIFT), + + GPIO1C2_SHIFT = 4, + GPIO1C2_MASK = GENMASK(GPIO1C2_SHIFT + 1, GPIO1C2_SHIFT), + GPIO1C2_GPIO = 0, + GPIO1C2_EMMC_DATA0 = (2 << GPIO1C2_SHIFT), + + GPIO1C1_SHIFT = 2, + GPIO1C1_MASK = GENMASK(GPIO1C1_SHIFT + 1, GPIO1C1_SHIFT), + GPIO1C1_GPIO = 0, + GPIO1C1_SPI1_RXD = (2 << GPIO1C1_SHIFT), + + GPIO1C0_SHIFT = 0, + GPIO1C0_MASK = GENMASK(GPIO1C0_SHIFT + 1, GPIO1C0_SHIFT), + GPIO1C0_GPIO = 0, + GPIO1C0_SPI1_TXD = (2 << GPIO1C0_SHIFT), +}; + +/* GRF_GPIO1D_IOMUX*/ +enum { + GPIO1D5_SHIFT = 10, + GPIO1D5_MASK = GENMASK(GPIO1D5_SHIFT + 1, GPIO1D5_SHIFT), + GPIO1D5_GPIO = 0, + GPIO1D5_SPI0_CLK = (2 << GPIO1D5_SHIFT), + + GPIO1D3_SHIFT = 6, + GPIO1D3_MASK = GENMASK(GPIO1D3_SHIFT + 1, GPIO1D3_SHIFT), + GPIO1D3_GPIO = 0, + GPIO1D3_EMMC_PWREN = (2 << GPIO1D3_SHIFT), + + GPIO1D2_SHIFT = 4, + GPIO1D2_MASK = GENMASK(GPIO1D2_SHIFT + 1, GPIO1D2_SHIFT), + GPIO1D2_GPIO = 0, + GPIO1D2_EMMC_CMD = (2 << GPIO1D2_SHIFT), + + GPIO1D1_SHIFT = 2, + GPIO1D1_MASK = GENMASK(GPIO1D1_SHIFT + 1, GPIO1D1_SHIFT), + GPIO1D1_GPIO = 0, + GPIO1D1_EMMC_DATA7 = (2 << GPIO1D1_SHIFT), + GPIO1D1_SPI0_CSN1 = (3 << GPIO1D1_SHIFT), + + GPIO1D0_SHIFT = 0, + GPIO1D0_MASK = GENMASK(GPIO1D0_SHIFT + 1, GPIO1D0_SHIFT), + GPIO1D0_GPIO = 0, + GPIO1D0_EMMC_DATA6 = (2 << GPIO1D0_SHIFT), + GPIO1D0_SPI0_CSN0 = (3 << GPIO1D0_SHIFT), +}; + + +/*GRF_GPIO3B_IOMUX*/ +enum { + GPIO3B7_SHIFT = 14, + GPIO3B7_MASK = GENMASK(GPIO3B7_SHIFT + 1, GPIO3B7_SHIFT), + GPIO3B7_GPIO = 0, + GPIO3B7_MAC_RXD0 = (1 << GPIO3B7_SHIFT), + + GPIO3B6_SHIFT = 12, + GPIO3B6_MASK = GENMASK(GPIO3B6_SHIFT + 1, GPIO3B6_SHIFT), + GPIO3B6_GPIO = 0, + GPIO3B6_MAC_TXD3 = (1 << GPIO3B6_SHIFT), + + GPIO3B5_SHIFT = 10, + GPIO3B5_MASK = GENMASK(GPIO3B5_SHIFT + 1, GPIO3B5_SHIFT), + GPIO3B5_GPIO = 0, + GPIO3B5_MAC_TXEN = (1 << GPIO3B5_SHIFT), + + GPIO3B4_SHIFT = 8, + GPIO3B4_MASK = GENMASK(GPIO3B4_SHIFT + 1, GPIO3B4_SHIFT), + GPIO3B4_GPIO = 0, + GPIO3B4_MAC_COL = (1 << GPIO3B4_SHIFT), + + GPIO3B3_SHIFT = 6, + GPIO3B3_MASK = GENMASK(GPIO3B3_SHIFT + 1, GPIO3B3_SHIFT), + GPIO3B3_GPIO = 0, + GPIO3B3_MAC_CRS = (1 << GPIO3B3_SHIFT), + + GPIO3B2_SHIFT = 4, + GPIO3B2_MASK = GENMASK(GPIO3B2_SHIFT + 1, GPIO3B2_SHIFT), + GPIO3B2_GPIO = 0, + GPIO3B2_MAC_TXD2 = (1 << GPIO3B2_SHIFT), + + GPIO3B1_SHIFT = 2, + GPIO3B1_MASK = GENMASK(GPIO3B1_SHIFT + 1, GPIO3B1_SHIFT), + GPIO3B1_GPIO = 0, + GPIO3B1_MAC_TXD1 = (1 << GPIO3B1_SHIFT), + + GPIO3B0_SHIFT = 0, + GPIO3B0_MASK = GENMASK(GPIO3B0_SHIFT + 1, GPIO3B0_SHIFT), + GPIO3B0_GPIO = 0, + GPIO3B0_MAC_TXD0 = (1 << GPIO3B0_SHIFT), + GPIO3B0_PWM0 = (2 << GPIO3B0_SHIFT), +}; + +/*GRF_GPIO3C_IOMUX*/ +enum { + GPIO3C6_SHIFT = 12, + GPIO3C6_MASK = GENMASK(GPIO3C6_SHIFT + 1, GPIO3C6_SHIFT), + GPIO3C6_GPIO = 0, + GPIO3C6_MAC_CLK = (1 << GPIO3C6_SHIFT), + + GPIO3C5_SHIFT = 10, + GPIO3C5_MASK = GENMASK(GPIO3C5_SHIFT + 1, GPIO3C5_SHIFT), + GPIO3C5_GPIO = 0, + GPIO3C5_MAC_RXEN = (1 << GPIO3C5_SHIFT), + + GPIO3C4_SHIFT = 8, + GPIO3C4_MASK = GENMASK(GPIO3C4_SHIFT + 1, GPIO3C4_SHIFT), + GPIO3C4_GPIO = 0, + GPIO3C4_MAC_RXDV = (1 << GPIO3C4_SHIFT), + + GPIO3C3_SHIFT = 6, + GPIO3C3_MASK = GENMASK(GPIO3C3_SHIFT + 1, GPIO3C3_SHIFT), + GPIO3C3_GPIO = 0, + GPIO3C3_MAC_MDC = (1 << GPIO3C3_SHIFT), + + GPIO3C2_SHIFT = 4, + GPIO3C2_MASK = GENMASK(GPIO3C2_SHIFT + 1, GPIO3C2_SHIFT), + GPIO3C2_GPIO = 0, + GPIO3C2_MAC_RXD3 = (1 << GPIO3C2_SHIFT), + + GPIO3C1_SHIFT = 2, + GPIO3C1_MASK = GENMASK(GPIO3C1_SHIFT + 1, GPIO3C1_SHIFT), + GPIO3C1_GPIO = 0, + GPIO3C1_MAC_RXD2 = (1 << GPIO3C1_SHIFT), + + GPIO3C0_SHIFT = 0, + GPIO3C0_MASK = GENMASK(GPIO3C0_SHIFT + 1, GPIO3C0_SHIFT), + GPIO3C0_GPIO = 0, + GPIO3C0_MAC_RXD1 = (1 << GPIO3C0_SHIFT), +}; + +/*GRF_GPIO3D_IOMUX*/ +enum { + GPIO3D4_SHIFT = 8, + GPIO3D4_MASK = GENMASK(GPIO3D4_SHIFT + 1, GPIO3D4_SHIFT), + GPIO3D4_GPIO = 0, + GPIO3D4_MAC_TXCLK = (1 << GPIO3D4_SHIFT), + GPIO3D4_SPI1_CNS1 = (2 << GPIO3D4_SHIFT), + + GPIO3D1_SHIFT = 2, + GPIO3D1_MASK = GENMASK(GPIO3D1_SHIFT + 1, GPIO3D1_SHIFT), + GPIO3D1_GPIO = 0, + GPIO3D1_MAC_RXCLK = (1 << GPIO3D1_SHIFT), + + GPIO3D0_SHIFT = 0, + GPIO3D0_MASK = GENMASK(GPIO3D0_SHIFT + 1, GPIO3D0_SHIFT), + GPIO3D0_GPIO = 0, + GPIO3D0_MAC_MDIO = (1 << GPIO3D0_SHIFT), +}; + struct rk3368_pinctrl_priv { struct rk3368_grf *grf; struct rk3368_pmu_grf *pmugrf; @@ -31,8 +456,7 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv, case PERIPH_ID_UART2: rk_clrsetreg(&grf->gpio2a_iomux, GPIO2A6_MASK | GPIO2A5_MASK, - GPIO2A6_UART2_SIN << GPIO2A6_SHIFT | - GPIO2A5_UART2_SOUT << GPIO2A5_SHIFT); + GPIO2A6_UART2_SIN | GPIO2A5_UART2_SOUT); break; case PERIPH_ID_UART0: break; @@ -44,10 +468,8 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv, rk_clrsetreg(&pmugrf->gpio0d_iomux, GPIO0D0_MASK | GPIO0D1_MASK | GPIO0D2_MASK | GPIO0D3_MASK, - GPIO0D0_GPIO << GPIO0D0_SHIFT | - GPIO0D1_GPIO << GPIO0D1_SHIFT | - GPIO0D2_UART4_SOUT << GPIO0D2_SHIFT | - GPIO0D3_UART4_SIN << GPIO0D3_SHIFT); + GPIO0D0_GPIO | GPIO0D1_GPIO | + GPIO0D2_UART4_SOUT | GPIO0D3_UART4_SIN); break; default: debug("uart id = %d iomux error!\n", uart_id); @@ -55,6 +477,121 @@ static void pinctrl_rk3368_uart_config(struct rk3368_pinctrl_priv *priv, } } +static void pinctrl_rk3368_spi_config(struct rk3368_pinctrl_priv *priv, + int spi_id) +{ + struct rk3368_grf *grf = priv->grf; + struct rk3368_pmu_grf *pmugrf = priv->pmugrf; + + switch (spi_id) { + case PERIPH_ID_SPI0: + /* + * eMMC can only be connected with 4 bits, when SPI0 is used. + * This is all-or-nothing, so we assume that if someone asks us + * to configure SPI0, that their eMMC interface is unused or + * configured appropriately. + */ + rk_clrsetreg(&grf->gpio1d_iomux, + GPIO1D0_MASK | GPIO1D1_MASK | + GPIO1D5_MASK, + GPIO1D0_SPI0_CSN0 | GPIO1D1_SPI0_CSN1 | + GPIO1D5_SPI0_CLK); + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C6_MASK | GPIO1C7_MASK, + GPIO1C6_SPI0_RXD | GPIO1C7_SPI0_TXD); + break; + case PERIPH_ID_SPI1: + /* + * We don't implement support for configuring SPI1_CSN#1, as it + * conflicts with the GMAC (MAC TX clk-out). + */ + rk_clrsetreg(&grf->gpio1b_iomux, + GPIO1B6_MASK | GPIO1B7_MASK, + GPIO1B6_SPI1_CLK | GPIO1B7_SPI1_CSN0); + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C0_MASK | GPIO1C1_MASK, + GPIO1C0_SPI1_TXD | GPIO1C1_SPI1_RXD); + break; + case PERIPH_ID_SPI2: + rk_clrsetreg(&pmugrf->gpio0b_iomux, + GPIO0B2_MASK | GPIO0B3_MASK | + GPIO0B4_MASK | GPIO0B5_MASK, + GPIO0B2_SPI2_RXD | GPIO0B3_SPI2_TXD | + GPIO0B4_SPI2_CLK | GPIO0B5_SPI2_CSN0); + break; + default: + debug("%s: spi id = %d iomux error!\n", __func__, spi_id); + break; + } +} + +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) +static void pinctrl_rk3368_gmac_config(struct rk3368_grf *grf, int gmac_id) +{ + rk_clrsetreg(&grf->gpio3b_iomux, + GPIO3B0_MASK | GPIO3B1_MASK | + GPIO3B2_MASK | GPIO3B5_MASK | + GPIO3B6_MASK | GPIO3B7_MASK, + GPIO3B0_MAC_TXD0 | GPIO3B1_MAC_TXD1 | + GPIO3B2_MAC_TXD2 | GPIO3B5_MAC_TXEN | + GPIO3B6_MAC_TXD3 | GPIO3B7_MAC_RXD0); + rk_clrsetreg(&grf->gpio3c_iomux, + GPIO3C0_MASK | GPIO3C1_MASK | + GPIO3C2_MASK | GPIO3C3_MASK | + GPIO3C4_MASK | GPIO3C5_MASK | + GPIO3C6_MASK, + GPIO3C0_MAC_RXD1 | GPIO3C1_MAC_RXD2 | + GPIO3C2_MAC_RXD3 | GPIO3C3_MAC_MDC | + GPIO3C4_MAC_RXDV | GPIO3C5_MAC_RXEN | + GPIO3C6_MAC_CLK); + rk_clrsetreg(&grf->gpio3d_iomux, + GPIO3D0_MASK | GPIO3D1_MASK | + GPIO3D4_MASK, + GPIO3D0_MAC_MDIO | GPIO3D1_MAC_RXCLK | + GPIO3D4_MAC_TXCLK); +} +#endif + +static void pinctrl_rk3368_sdmmc_config(struct rk3368_grf *grf, int mmc_id) +{ + switch (mmc_id) { + case PERIPH_ID_EMMC: + debug("mmc id = %d setting registers!\n", mmc_id); + rk_clrsetreg(&grf->gpio1c_iomux, + GPIO1C2_MASK | GPIO1C3_MASK | + GPIO1C4_MASK | GPIO1C5_MASK | + GPIO1C6_MASK | GPIO1C7_MASK, + GPIO1C2_EMMC_DATA0 | + GPIO1C3_EMMC_DATA1 | + GPIO1C4_EMMC_DATA2 | + GPIO1C5_EMMC_DATA3 | + GPIO1C6_EMMC_DATA4 | + GPIO1C7_EMMC_DATA5); + rk_clrsetreg(&grf->gpio1d_iomux, + GPIO1D0_MASK | GPIO1D1_MASK | + GPIO1D2_MASK | GPIO1D3_MASK, + GPIO1D0_EMMC_DATA6 | + GPIO1D1_EMMC_DATA7 | + GPIO1D2_EMMC_CMD | + GPIO1D3_EMMC_PWREN); + rk_clrsetreg(&grf->gpio2a_iomux, + GPIO2A3_MASK | GPIO2A4_MASK, + GPIO2A3_EMMC_RSTNOUT | + GPIO2A4_EMMC_CLKOUT); + break; + case PERIPH_ID_SDCARD: + /* + * We assume that the BROM has already set this up + * correctly for us and that there's nothing to do + * here. + */ + break; + default: + debug("mmc id = %d iomux error!\n", mmc_id); + break; + } +} + static int rk3368_pinctrl_request(struct udevice *dev, int func, int flags) { struct rk3368_pinctrl_priv *priv = dev_get_priv(dev); @@ -68,6 +605,20 @@ static int rk3368_pinctrl_request(struct udevice *dev, int func, int flags) case PERIPH_ID_UART4: pinctrl_rk3368_uart_config(priv, func); break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + pinctrl_rk3368_spi_config(priv, func); + break; + case PERIPH_ID_EMMC: + case PERIPH_ID_SDCARD: + pinctrl_rk3368_sdmmc_config(priv->grf, func); + break; +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) + case PERIPH_ID_GMAC: + pinctrl_rk3368_gmac_config(priv->grf, func); + break; +#endif default: return -EINVAL; } @@ -97,6 +648,20 @@ static int rk3368_pinctrl_get_periph_id(struct udevice *dev, return PERIPH_ID_UART1; case 55: return PERIPH_ID_UART0; + case 44: + return PERIPH_ID_SPI0; + case 45: + return PERIPH_ID_SPI1; + case 41: + return PERIPH_ID_SPI2; + case 35: + return PERIPH_ID_EMMC; + case 32: + return PERIPH_ID_SDCARD; +#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP) + case 27: + return PERIPH_ID_GMAC; +#endif } return -ENOENT; diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig index 61afd7a92a..836be25507 100644 --- a/drivers/ram/Kconfig +++ b/drivers/ram/Kconfig @@ -10,13 +10,22 @@ config RAM config SPL_RAM bool "Enable RAM support in SPL" - depends on RAM + depends on RAM && SPL_DM help The RAM subsystem adds a small amount of overhead to the image. If this is acceptable and you have a need to use RAM drivers in SPL, enable this option. It might provide a cleaner interface to setting up RAM (e.g. SDRAM / DDR) within SPL. +config TPL_RAM + bool "Enable RAM support in SPL" + depends on RAM && TPL_DM + help + The RAM subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use RAM drivers in + TPL, enable this option. It might provide a cleaner interface to + setting up RAM (e.g. SDRAM / DDR) within TPL. + config STM32_SDRAM bool "Enable STM32 SDRAM support" depends on RAM diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index c409c480fc..51ae6be655 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -8,3 +8,5 @@ obj-$(CONFIG_RAM) += ram-uclass.o obj-$(CONFIG_SANDBOX) += sandbox_ram.o obj-$(CONFIG_STM32_SDRAM) += stm32_sdram.o obj-$(CONFIG_ARCH_BMIPS) += bmips_ram.o + +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ diff --git a/drivers/ram/rockchip/Makefile b/drivers/ram/rockchip/Makefile new file mode 100644 index 0000000000..b09d03c2c9 --- /dev/null +++ b/drivers/ram/rockchip/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_ROCKCHIP_RK3368) = dmc-rk3368.o diff --git a/drivers/ram/rockchip/dmc-rk3368.c b/drivers/ram/rockchip/dmc-rk3368.c new file mode 100644 index 0000000000..ca7b1ff0c8 --- /dev/null +++ b/drivers/ram/rockchip/dmc-rk3368.c @@ -0,0 +1,1007 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dt-bindings/memory/rk3368-dmc.h> +#include <dt-structs.h> +#include <ram.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cru_rk3368.h> +#include <asm/arch/grf_rk3368.h> +#include <asm/arch/ddr_rk3368.h> +#include <asm/arch/sdram.h> +#include <asm/arch/sdram_common.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct dram_info { + struct ram_info info; + struct clk ddr_clk; + struct rk3368_cru *cru; + struct rk3368_grf *grf; + struct rk3368_ddr_pctl *pctl; + struct rk3368_ddrphy *phy; + struct rk3368_pmu_grf *pmugrf; + struct rk3368_msch *msch; +}; + +struct rk3368_sdram_params { +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct dtd_rockchip_rk3368_dmc of_plat; +#endif + struct rk3288_sdram_pctl_timing pctl_timing; + u32 trefi_mem_ddr3; + struct rk3288_sdram_channel chan; + struct regmap *map; + u32 ddr_freq; + u32 memory_schedule; + u32 ddr_speed_bin; + u32 tfaw_mult; +}; + +/* PTCL bits */ +enum { + /* PCTL_DFISTCFG0 */ + DFI_INIT_START = BIT(0), + DFI_DATA_BYTE_DISABLE_EN = BIT(2), + + /* PCTL_DFISTCFG1 */ + DFI_DRAM_CLK_SR_EN = BIT(0), + DFI_DRAM_CLK_DPD_EN = BIT(1), + ODT_LEN_BL8_W_SHIFT = 16, + + /* PCTL_DFISTCFG2 */ + DFI_PARITY_INTR_EN = BIT(0), + DFI_PARITY_EN = BIT(1), + + /* PCTL_DFILPCFG0 */ + TLP_RESP_TIME_SHIFT = 16, + LP_SR_EN = BIT(8), + LP_PD_EN = BIT(0), + + /* PCTL_DFIODTCFG */ + RANK0_ODT_WRITE_SEL = BIT(3), + RANK1_ODT_WRITE_SEL = BIT(11), + + /* PCTL_SCFG */ + HW_LOW_POWER_EN = BIT(0), + + /* PCTL_MCMD */ + START_CMD = BIT(31), + MCMD_RANK0 = BIT(20), + MCMD_RANK1 = BIT(21), + DESELECT_CMD = 0, + PREA_CMD, + REF_CMD, + MRS_CMD, + ZQCS_CMD, + ZQCL_CMD, + RSTL_CMD, + MRR_CMD = 8, + DPDE_CMD, + + /* PCTL_POWCTL */ + POWER_UP_START = BIT(0), + + /* PCTL_POWSTAT */ + POWER_UP_DONE = BIT(0), + + /* PCTL_SCTL */ + INIT_STATE = 0, + CFG_STATE, + GO_STATE, + SLEEP_STATE, + WAKEUP_STATE, + + /* PCTL_STAT */ + LP_TRIG_SHIFT = 4, + LP_TRIG_MASK = 7, + PCTL_STAT_MSK = 7, + INIT_MEM = 0, + CONFIG, + CONFIG_REQ, + ACCESS, + ACCESS_REQ, + LOW_POWER, + LOW_POWER_ENTRY_REQ, + LOW_POWER_EXIT_REQ, + + /* PCTL_MCFG */ + DDR2_DDR3_BL_8 = BIT(0), + DDR3_EN = BIT(5), + TFAW_TRRD_MULT4 = (0 << 18), + TFAW_TRRD_MULT5 = (1 << 18), + TFAW_TRRD_MULT6 = (2 << 18), +}; + +#define DDR3_MR0_WR(n) \ + ((n <= 8) ? ((n - 4) << 9) : (((n >> 1) & 0x7) << 9)) +#define DDR3_MR0_CL(n) \ + ((((n - 4) & 0x7) << 4) | (((n - 4) & 0x8) >> 2)) +#define DDR3_MR0_BL8 \ + (0 << 0) +#define DDR3_MR0_DLL_RESET \ + (1 << 8) +#define DDR3_MR1_RTT120OHM \ + ((0 << 9) | (1 << 6) | (0 << 2)) +#define DDR3_MR2_TWL(n) \ + (((n - 5) & 0x7) << 3) + + +#ifdef CONFIG_TPL_BUILD + +static void ddr_set_noc_spr_err_stall(struct rk3368_grf *grf, bool enable) +{ + if (enable) + rk_setreg(&grf->ddrc0_con0, NOC_RSP_ERR_STALL); + else + rk_clrreg(&grf->ddrc0_con0, NOC_RSP_ERR_STALL); +} + +static void ddr_set_ddr3_mode(struct rk3368_grf *grf, bool ddr3_mode) +{ + if (ddr3_mode) + rk_setreg(&grf->ddrc0_con0, MSCH0_MAINDDR3_DDR3); + else + rk_clrreg(&grf->ddrc0_con0, MSCH0_MAINDDR3_DDR3); +} + +static void ddrphy_config(struct rk3368_ddrphy *phy, + u32 tcl, u32 tal, u32 tcwl) +{ + int i; + + /* Set to DDR3 mode */ + clrsetbits_le32(&phy->reg[1], 0x3, 0x0); + + /* DDRPHY_REGB: CL, AL */ + clrsetbits_le32(&phy->reg[0xb], 0xff, tcl << 4 | tal); + /* DDRPHY_REGC: CWL */ + clrsetbits_le32(&phy->reg[0xc], 0x0f, tcwl); + + /* Update drive-strength */ + writel(0xcc, &phy->reg[0x11]); + writel(0xaa, &phy->reg[0x16]); + /* + * Update NRCOMP/PRCOMP for all 4 channels (for details of all + * affected registers refer to the documentation of DDRPHY_REG20 + * and DDRPHY_REG21 in the RK3368 TRM. + */ + for (i = 0; i < 4; ++i) { + writel(0xcc, &phy->reg[0x20 + i * 0x10]); + writel(0x44, &phy->reg[0x21 + i * 0x10]); + } + + /* Enable write-leveling calibration bypass */ + setbits_le32(&phy->reg[2], BIT(3)); +} + +static void copy_to_reg(u32 *dest, const u32 *src, u32 n) +{ + int i; + + for (i = 0; i < n / sizeof(u32); i++) + writel(*src++, dest++); +} + +static void send_command(struct rk3368_ddr_pctl *pctl, u32 rank, u32 cmd) +{ + u32 mcmd = START_CMD | cmd | rank; + + debug("%s: writing %x to MCMD\n", __func__, mcmd); + writel(mcmd, &pctl->mcmd); + while (readl(&pctl->mcmd) & START_CMD) + /* spin */; +} + +static void send_mrs(struct rk3368_ddr_pctl *pctl, + u32 rank, u32 mr_num, u32 mr_data) +{ + u32 mcmd = START_CMD | MRS_CMD | rank | (mr_num << 17) | (mr_data << 4); + + debug("%s: writing %x to MCMD\n", __func__, mcmd); + writel(mcmd, &pctl->mcmd); + while (readl(&pctl->mcmd) & START_CMD) + /* spin */; +} + +static int memory_init(struct rk3368_ddr_pctl *pctl, + struct rk3368_sdram_params *params) +{ + u32 mr[4]; + const ulong timeout_ms = 500; + ulong tmp; + + /* + * Power up DRAM by DDR_PCTL_POWCTL[0] register of PCTL and + * wait power up DRAM finish with DDR_PCTL_POWSTAT[0] register + * of PCTL. + */ + writel(POWER_UP_START, &pctl->powctl); + + tmp = get_timer(0); + do { + if (get_timer(tmp) > timeout_ms) { + error("%s: POWER_UP_START did not complete in %ld ms\n", + __func__, timeout_ms); + return -ETIME; + } + } while (!(readl(&pctl->powstat) & POWER_UP_DONE)); + + /* Configure MR0 through MR3 */ + mr[0] = DDR3_MR0_WR(params->pctl_timing.twr) | + DDR3_MR0_CL(params->pctl_timing.tcl) | + DDR3_MR0_DLL_RESET; + mr[1] = DDR3_MR1_RTT120OHM; + mr[2] = DDR3_MR2_TWL(params->pctl_timing.tcwl); + mr[3] = 0; + + /* + * Also see RK3368 Technical Reference Manual: + * "16.6.2 Initialization (DDR3 Initialization Sequence)" + */ + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, DESELECT_CMD); + udelay(1); + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, PREA_CMD); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 2, mr[2]); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 3, mr[3]); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 1, mr[1]); + send_mrs(pctl, MCMD_RANK0 | MCMD_RANK1, 0, mr[0]); + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, ZQCL_CMD); + + return 0; +} + +static void move_to_config_state(struct rk3368_ddr_pctl *pctl) +{ + /* + * Also see RK3368 Technical Reference Manual: + * "16.6.1 State transition of PCTL (Moving to Config State)" + */ + u32 state = readl(&pctl->stat) & PCTL_STAT_MSK; + + switch (state) { + case LOW_POWER: + writel(WAKEUP_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS) + /* spin */; + + /* fall-through */ + case ACCESS: + case INIT_MEM: + writel(CFG_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG) + /* spin */; + break; + + case CONFIG: + return; + + default: + break; + } +} + +static void move_to_access_state(struct rk3368_ddr_pctl *pctl) +{ + /* + * Also see RK3368 Technical Reference Manual: + * "16.6.1 State transition of PCTL (Moving to Access State)" + */ + u32 state = readl(&pctl->stat) & PCTL_STAT_MSK; + + switch (state) { + case LOW_POWER: + if (((readl(&pctl->stat) >> LP_TRIG_SHIFT) & + LP_TRIG_MASK) == 1) + return; + + writel(WAKEUP_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS) + /* spin */; + + /* fall-through */ + case INIT_MEM: + writel(CFG_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG) + /* spin */; + + /* fall-through */ + case CONFIG: + writel(GO_STATE, &pctl->sctl); + while ((readl(&pctl->stat) & PCTL_STAT_MSK) == CONFIG) + /* spin */; + break; + + case ACCESS: + return; + + default: + break; + } +} + +static void ddrctl_reset(struct rk3368_cru *cru) +{ + const u32 ctl_reset = BIT(3) | BIT(2); + const u32 phy_reset = BIT(1) | BIT(0); + + /* + * The PHY reset should be released before the PCTL reset. + * + * Note that the following sequence (including the number of + * us to delay between releasing the PHY and PCTL reset) has + * been adapted per feedback received from Rockchips, so do + * not try to optimise. + */ + rk_setreg(&cru->softrst_con[10], ctl_reset | phy_reset); + udelay(1); + rk_clrreg(&cru->softrst_con[10], phy_reset); + udelay(5); + rk_clrreg(&cru->softrst_con[10], ctl_reset); +} + +static void ddrphy_reset(struct rk3368_ddrphy *ddrphy) +{ + /* + * The analog part of the PHY should be release at least 1000 + * DRAM cycles before the digital part of the PHY (waiting for + * 5us will ensure this for a DRAM clock as low as 200MHz). + */ + clrbits_le32(&ddrphy->reg[0], BIT(3) | BIT(2)); + udelay(1); + setbits_le32(&ddrphy->reg[0], BIT(2)); + udelay(5); + setbits_le32(&ddrphy->reg[0], BIT(3)); +} + +static void ddrphy_config_delays(struct rk3368_ddrphy *ddrphy, u32 freq) +{ + u32 dqs_dll_delay; + + setbits_le32(&ddrphy->reg[0x13], BIT(4)); + clrbits_le32(&ddrphy->reg[0x14], BIT(3)); + + setbits_le32(&ddrphy->reg[0x26], BIT(4)); + clrbits_le32(&ddrphy->reg[0x27], BIT(3)); + + setbits_le32(&ddrphy->reg[0x36], BIT(4)); + clrbits_le32(&ddrphy->reg[0x37], BIT(3)); + + setbits_le32(&ddrphy->reg[0x46], BIT(4)); + clrbits_le32(&ddrphy->reg[0x47], BIT(3)); + + setbits_le32(&ddrphy->reg[0x56], BIT(4)); + clrbits_le32(&ddrphy->reg[0x57], BIT(3)); + + if (freq <= 400000000) + setbits_le32(&ddrphy->reg[0xa4], 0x1f); + else + clrbits_le32(&ddrphy->reg[0xa4], 0x1f); + + if (freq < 681000000) + dqs_dll_delay = 3; /* 67.5 degree delay */ + else + dqs_dll_delay = 2; /* 45 degree delay */ + + writel(dqs_dll_delay, &ddrphy->reg[0x28]); + writel(dqs_dll_delay, &ddrphy->reg[0x38]); + writel(dqs_dll_delay, &ddrphy->reg[0x48]); + writel(dqs_dll_delay, &ddrphy->reg[0x58]); +} + +static int dfi_cfg(struct rk3368_ddr_pctl *pctl) +{ + const ulong timeout_ms = 200; + ulong tmp; + + writel(DFI_DATA_BYTE_DISABLE_EN, &pctl->dfistcfg0); + + writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, + &pctl->dfistcfg1); + writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2); + writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN, + &pctl->dfilpcfg0); + + writel(1, &pctl->dfitphyupdtype0); + + writel(0x1f, &pctl->dfitphyrdlat); + writel(0, &pctl->dfitphywrdata); + writel(0, &pctl->dfiupdcfg); /* phyupd and ctrlupd disabled */ + + setbits_le32(&pctl->dfistcfg0, DFI_INIT_START); + + tmp = get_timer(0); + do { + if (get_timer(tmp) > timeout_ms) { + error("%s: DFI init did not complete within %ld ms\n", + __func__, timeout_ms); + return -ETIME; + } + } while ((readl(&pctl->dfiststat0) & 1) == 0); + + return 0; +} + +static inline u32 ps_to_tCK(const u32 ps, const ulong freq) +{ + const ulong MHz = 1000000; + return DIV_ROUND_UP(ps * freq, 1000000 * MHz); +} + +static inline u32 ns_to_tCK(const u32 ns, const ulong freq) +{ + return ps_to_tCK(ns * 1000, freq); +} + +static inline u32 tCK_to_ps(const ulong tCK, const ulong freq) +{ + const ulong MHz = 1000000; + return DIV_ROUND_UP(tCK * 1000000 * MHz, freq); +} + +static int pctl_calc_timings(struct rk3368_sdram_params *params, + ulong freq) +{ + struct rk3288_sdram_pctl_timing *pctl_timing = ¶ms->pctl_timing; + const ulong MHz = 1000000; + u32 tccd; + u32 tfaw_as_ps; + + if (params->ddr_speed_bin != DDR3_1600K) { + error("%s: unimplemented DDR3 speed bin %d\n", + __func__, params->ddr_speed_bin); + return -1; + } + + /* PCTL is clocked at 1/2 the DRAM clock; err on the side of caution */ + pctl_timing->togcnt1u = DIV_ROUND_UP(freq, 2 * MHz); + pctl_timing->togcnt100n = DIV_ROUND_UP(freq / 10, 2 * MHz); + + pctl_timing->tinit = 200; /* 200 usec */ + pctl_timing->trsth = 500; /* 500 usec */ + pctl_timing->trefi = 78; /* 7.8usec = 78 * 100ns */ + params->trefi_mem_ddr3 = ns_to_tCK(pctl_timing->trefi * 100, freq); + + if (freq <= (400 * MHz)) { + pctl_timing->tcl = 6; + pctl_timing->tcwl = 10; + } else if (freq <= (533 * MHz)) { + pctl_timing->tcl = 8; + pctl_timing->tcwl = 6; + } else if (freq <= (666 * MHz)) { + pctl_timing->tcl = 10; + pctl_timing->tcwl = 7; + } else { + pctl_timing->tcl = 11; + pctl_timing->tcwl = 8; + } + + pctl_timing->tmrd = 4; /* 4 tCK (all speed bins) */ + pctl_timing->trfc = ns_to_tCK(350, freq); /* tRFC: 350 (max) @ 8GBit */ + pctl_timing->trp = max(4u, ps_to_tCK(13750, freq)); + /* + * JESD-79: + * READ to WRITE Command Delay = RL + tCCD / 2 + 2tCK - WL + */ + tccd = 4; + pctl_timing->trtw = pctl_timing->tcl + tccd/2 + 2 - pctl_timing->tcwl; + pctl_timing->tal = 0; + pctl_timing->tras = ps_to_tCK(35000, freq); + pctl_timing->trc = ps_to_tCK(48750, freq); + pctl_timing->trcd = ps_to_tCK(13750, freq); + pctl_timing->trrd = max(4u, ps_to_tCK(7500, freq)); + pctl_timing->trtp = max(4u, ps_to_tCK(7500, freq)); + pctl_timing->twr = ps_to_tCK(15000, freq); + /* The DDR3 mode-register does only support even values for tWR > 8. */ + if (pctl_timing->twr > 8) + pctl_timing->twr = (pctl_timing->twr + 1) & ~1; + pctl_timing->twtr = max(4u, ps_to_tCK(7500, freq)); + pctl_timing->texsr = 512; /* tEXSR(max) is tDLLLK */ + pctl_timing->txp = max(3u, ps_to_tCK(6000, freq)); + pctl_timing->txpdll = max(10u, ps_to_tCK(24000, freq)); + pctl_timing->tzqcs = max(64u, ps_to_tCK(80000, freq)); + pctl_timing->tzqcsi = 10000; /* as used by Rockchip */ + pctl_timing->tdqs = 1; /* fixed for DDR3 */ + pctl_timing->tcksre = max(5u, ps_to_tCK(10000, freq)); + pctl_timing->tcksrx = max(5u, ps_to_tCK(10000, freq)); + pctl_timing->tcke = max(3u, ps_to_tCK(5000, freq)); + pctl_timing->tmod = max(12u, ps_to_tCK(15000, freq)); + pctl_timing->trstl = ns_to_tCK(100, freq); + pctl_timing->tzqcl = max(256u, ps_to_tCK(320000, freq)); /* tZQoper */ + pctl_timing->tmrr = 0; + pctl_timing->tckesr = pctl_timing->tcke + 1; /* JESD-79: tCKE + 1tCK */ + pctl_timing->tdpd = 0; /* RK3368 TRM: "allowed values for DDR3: 0" */ + + + /* + * The controller can represent tFAW as 4x, 5x or 6x tRRD only. + * We want to use the smallest multiplier that satisfies the tFAW + * requirements of the given speed-bin. If necessary, we stretch out + * tRRD to allow us to operate on a 6x multiplier for tFAW. + */ + tfaw_as_ps = 40000; /* 40ns: tFAW for DDR3-1600K, 2KB page-size */ + if (tCK_to_ps(pctl_timing->trrd * 6, freq) < tfaw_as_ps) { + /* If tFAW is > 6 x tRRD, we need to stretch tRRD */ + pctl_timing->trrd = ps_to_tCK(DIV_ROUND_UP(40000, 6), freq); + params->tfaw_mult = TFAW_TRRD_MULT6; + } else if (tCK_to_ps(pctl_timing->trrd * 5, freq) < tfaw_as_ps) { + params->tfaw_mult = TFAW_TRRD_MULT6; + } else if (tCK_to_ps(pctl_timing->trrd * 4, freq) < tfaw_as_ps) { + params->tfaw_mult = TFAW_TRRD_MULT5; + } else { + params->tfaw_mult = TFAW_TRRD_MULT4; + } + + return 0; +} + +static void pctl_cfg(struct rk3368_ddr_pctl *pctl, + struct rk3368_sdram_params *params, + struct rk3368_grf *grf) +{ + /* Configure PCTL timing registers */ + params->pctl_timing.trefi |= BIT(31); /* see PCTL_TREFI */ + copy_to_reg(&pctl->togcnt1u, ¶ms->pctl_timing.togcnt1u, + sizeof(params->pctl_timing)); + writel(params->trefi_mem_ddr3, &pctl->trefi_mem_ddr3); + + /* Set up ODT write selector and ODT write length */ + writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL), &pctl->dfiodtcfg); + writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1); + + /* Set up the CL/CWL-dependent timings of DFI */ + writel((params->pctl_timing.tcl - 1) / 2 - 1, &pctl->dfitrddataen); + writel((params->pctl_timing.tcwl - 1) / 2 - 1, &pctl->dfitphywrlat); + + /* DDR3 */ + writel(params->tfaw_mult | DDR3_EN | DDR2_DDR3_BL_8, &pctl->mcfg); + writel(0x001c0004, &grf->ddrc0_con0); + + setbits_le32(&pctl->scfg, HW_LOW_POWER_EN); +} + +static int ddrphy_data_training(struct rk3368_ddr_pctl *pctl, + struct rk3368_ddrphy *ddrphy) +{ + const u32 trefi = readl(&pctl->trefi); + const ulong timeout_ms = 500; + ulong tmp; + + /* disable auto-refresh */ + writel(0 | BIT(31), &pctl->trefi); + + clrsetbits_le32(&ddrphy->reg[2], 0x33, 0x20); + clrsetbits_le32(&ddrphy->reg[2], 0x33, 0x21); + + tmp = get_timer(0); + do { + if (get_timer(tmp) > timeout_ms) { + error("%s: did not complete within %ld ms\n", + __func__, timeout_ms); + return -ETIME; + } + } while ((readl(&ddrphy->reg[0xff]) & 0xf) != 0xf); + + send_command(pctl, MCMD_RANK0 | MCMD_RANK1, PREA_CMD); + clrsetbits_le32(&ddrphy->reg[2], 0x33, 0x20); + /* resume auto-refresh */ + writel(trefi | BIT(31), &pctl->trefi); + + return 0; +} + +static int sdram_col_row_detect(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct rk3368_sdram_params *params = dev_get_platdata(dev); + struct rk3368_ddr_pctl *pctl = priv->pctl; + struct rk3368_msch *msch = priv->msch; + const u32 test_pattern = 0x5aa5f00f; + int row, col; + uintptr_t addr; + + move_to_config_state(pctl); + writel(6, &msch->ddrconf); + move_to_access_state(pctl); + + /* Detect col */ + for (col = 11; col >= 9; col--) { + writel(0, CONFIG_SYS_SDRAM_BASE); + addr = CONFIG_SYS_SDRAM_BASE + + (1 << (col + params->chan.bw - 1)); + writel(test_pattern, addr); + if ((readl(addr) == test_pattern) && + (readl(CONFIG_SYS_SDRAM_BASE) == 0)) + break; + } + + if (col == 8) { + error("%s: col detect error\n", __func__); + return -EINVAL; + } + + move_to_config_state(pctl); + writel(15, &msch->ddrconf); + move_to_access_state(pctl); + + /* Detect row*/ + for (row = 16; row >= 12; row--) { + writel(0, CONFIG_SYS_SDRAM_BASE); + addr = CONFIG_SYS_SDRAM_BASE + (1 << (row + 15 - 1)); + writel(test_pattern, addr); + if ((readl(addr) == test_pattern) && + (readl(CONFIG_SYS_SDRAM_BASE) == 0)) + break; + } + + if (row == 11) { + error("%s: row detect error\n", __func__); + return -EINVAL; + } + + /* Record results */ + debug("%s: col %d, row %d\n", __func__, col, row); + params->chan.col = col; + params->chan.cs0_row = row; + params->chan.cs1_row = row; + params->chan.row_3_4 = 0; + + return 0; +} + +static int msch_niu_config(struct rk3368_msch *msch, + struct rk3368_sdram_params *params) +{ + int i; + const u8 cols = params->chan.col - ((params->chan.bw == 2) ? 0 : 1); + const u8 rows = params->chan.cs0_row; + + /* + * The DDR address-translation table always assumes a 32bit + * bus and the comparison below takes care of adjusting for + * a 16bit bus (i.e. one column-address is consumed). + */ + const struct { + u8 rows; + u8 columns; + u8 type; + } ddrconf_table[] = { + /* + * C-B-R-D patterns are first. For these we require an + * exact match for the columns and rows (as there's + * one entry per possible configuration). + */ + [0] = { .rows = 13, .columns = 10, .type = DMC_MSCH_CBRD }, + [1] = { .rows = 14, .columns = 10, .type = DMC_MSCH_CBRD }, + [2] = { .rows = 15, .columns = 10, .type = DMC_MSCH_CBRD }, + [3] = { .rows = 16, .columns = 10, .type = DMC_MSCH_CBRD }, + [4] = { .rows = 14, .columns = 11, .type = DMC_MSCH_CBRD }, + [5] = { .rows = 15, .columns = 11, .type = DMC_MSCH_CBRD }, + [6] = { .rows = 16, .columns = 11, .type = DMC_MSCH_CBRD }, + [7] = { .rows = 13, .columns = 9, .type = DMC_MSCH_CBRD }, + [8] = { .rows = 14, .columns = 9, .type = DMC_MSCH_CBRD }, + [9] = { .rows = 15, .columns = 9, .type = DMC_MSCH_CBRD }, + [10] = { .rows = 16, .columns = 9, .type = DMC_MSCH_CBRD }, + /* + * 11 through 13 are C-R-B-D patterns. These are + * matched for an exact number of columns and to + * ensure that the hardware uses at least as many rows + * as the pattern requires (i.e. we make sure that + * there's no gaps up until we hit the device/chip-select; + * however, these patterns can accept up to 16 rows, + * as the row-address continues right after the CS + * switching) + */ + [11] = { .rows = 15, .columns = 10, .type = DMC_MSCH_CRBD }, + [12] = { .rows = 14, .columns = 11, .type = DMC_MSCH_CRBD }, + [13] = { .rows = 13, .columns = 10, .type = DMC_MSCH_CRBD }, + /* + * 14 and 15 are catch-all variants using a C-B-D-R + * scheme (i.e. alternating the chip-select every time + * C-B overflows) and stuffing the remaining C-bits + * into the top. Matching needs to make sure that the + * number of columns is either an exact match (i.e. we + * can use less the the maximum number of rows) -or- + * that the columns exceed what is given in this table + * and the rows are an exact match (in which case the + * remaining C-bits will be stuffed onto the top after + * the device/chip-select switches). + */ + [14] = { .rows = 16, .columns = 10, .type = DMC_MSCH_CBDR }, + [15] = { .rows = 16, .columns = 9, .type = DMC_MSCH_CBDR }, + }; + + /* + * For C-B-R-D, we need an exact match (i.e. both for the number of + * columns and rows), while for C-B-D-R, only the the number of + * columns needs to match. + */ + for (i = 0; i < ARRAY_SIZE(ddrconf_table); i++) { + bool match = false; + + /* If this entry if for a different matcher, then skip it */ + if (ddrconf_table[i].type != params->memory_schedule) + continue; + + /* + * Match according to the rules (exact/inexact/at-least) + * documented in the ddrconf_table above. + */ + switch (params->memory_schedule) { + case DMC_MSCH_CBRD: + match = (ddrconf_table[i].columns == cols) && + (ddrconf_table[i].rows == rows); + break; + + case DMC_MSCH_CRBD: + match = (ddrconf_table[i].columns == cols) && + (ddrconf_table[i].rows <= rows); + break; + + case DMC_MSCH_CBDR: + match = (ddrconf_table[i].columns == cols) || + ((ddrconf_table[i].columns <= cols) && + (ddrconf_table[i].rows == rows)); + break; + + default: + break; + } + + if (match) { + debug("%s: setting ddrconf 0x%x\n", __func__, i); + writel(i, &msch->ddrconf); + return 0; + } + } + + error("%s: ddrconf (NIU config) not found\n", __func__); + return -EINVAL; +} + +static void dram_all_config(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct rk3368_pmu_grf *pmugrf = priv->pmugrf; + struct rk3368_sdram_params *params = dev_get_platdata(dev); + const struct rk3288_sdram_channel *info = ¶ms->chan; + u32 sys_reg = 0; + const int chan = 0; + + sys_reg |= DDR3 << SYS_REG_DDRTYPE_SHIFT; + sys_reg |= 0 << SYS_REG_NUM_CH_SHIFT; + + sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan); + sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan); + sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan); + sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan); + sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan); + sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan); + sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan); + sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan); + sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(chan); + + writel(sys_reg, &pmugrf->os_reg[2]); +} + +static int setup_sdram(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + struct rk3368_sdram_params *params = dev_get_platdata(dev); + + struct rk3368_ddr_pctl *pctl = priv->pctl; + struct rk3368_ddrphy *ddrphy = priv->phy; + struct rk3368_cru *cru = priv->cru; + struct rk3368_grf *grf = priv->grf; + struct rk3368_msch *msch = priv->msch; + + int ret; + + /* The input clock (i.e. DPLL) needs to be 2x the DRAM frequency */ + ret = clk_set_rate(&priv->ddr_clk, 2 * params->ddr_freq); + if (ret < 0) { + debug("%s: could not set DDR clock: %d\n", __func__, ret); + return ret; + } + + /* Update the read-latency for the RK3368 */ + writel(0x32, &msch->readlatency); + + /* Initialise the DDR PCTL and DDR PHY */ + ddrctl_reset(cru); + ddrphy_reset(ddrphy); + ddrphy_config_delays(ddrphy, params->ddr_freq); + dfi_cfg(pctl); + /* Configure relative system information of grf_ddrc0_con0 register */ + ddr_set_ddr3_mode(grf, true); + ddr_set_noc_spr_err_stall(grf, true); + /* Calculate timings */ + pctl_calc_timings(params, params->ddr_freq); + /* Initialise the device timings in protocol controller */ + pctl_cfg(pctl, params, grf); + /* Configure AL, CL ... information of PHY registers */ + ddrphy_config(ddrphy, + params->pctl_timing.tcl, + params->pctl_timing.tal, + params->pctl_timing.tcwl); + + /* Initialize DRAM and configure with mode-register values */ + ret = memory_init(pctl, params); + if (ret) + goto error; + + move_to_config_state(pctl); + /* Perform data-training */ + ddrphy_data_training(pctl, ddrphy); + move_to_access_state(pctl); + + /* TODO(prt): could detect rank in training... */ + params->chan.rank = 2; + /* TODO(prt): bus width is not auto-detected (yet)... */ + params->chan.bw = 2; /* 32bit wide bus */ + params->chan.dbw = params->chan.dbw; /* 32bit wide bus */ + + /* DDR3 is always 8 bank */ + params->chan.bk = 3; + /* Detect col and row number */ + ret = sdram_col_row_detect(dev); + if (ret) + goto error; + + /* Configure NIU DDR configuration */ + ret = msch_niu_config(msch, params); + if (ret) + goto error; + + /* set up OS_REG to communicate w/ next stage and OS */ + dram_all_config(dev); + + return 0; + +error: + printf("DRAM init failed!\n"); + hang(); +} +#endif + +static int rk3368_dmc_ofdata_to_platdata(struct udevice *dev) +{ + int ret = 0; + +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct rk3368_sdram_params *plat = dev_get_platdata(dev); + + ret = regmap_init_mem(dev, &plat->map); + if (ret) + return ret; +#endif + + return ret; +} + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +static int conv_of_platdata(struct udevice *dev) +{ + struct rk3368_sdram_params *plat = dev_get_platdata(dev); + struct dtd_rockchip_rk3368_dmc *of_plat = &plat->of_plat; + int ret; + + plat->ddr_freq = of_plat->rockchip_ddr_frequency; + plat->ddr_speed_bin = of_plat->rockchip_ddr_speed_bin; + plat->memory_schedule = of_plat->rockchip_memory_schedule; + + ret = regmap_init_mem_platdata(dev, of_plat->reg, + ARRAY_SIZE(of_plat->reg) / 2, + &plat->map); + if (ret) + return ret; + + return 0; +} +#endif + +static int rk3368_dmc_probe(struct udevice *dev) +{ +#ifdef CONFIG_TPL_BUILD + struct rk3368_sdram_params *plat = dev_get_platdata(dev); + struct rk3368_ddr_pctl *pctl; + struct rk3368_ddrphy *ddrphy; + struct rk3368_cru *cru; + struct rk3368_grf *grf; + struct rk3368_msch *msch; + int ret; + struct udevice *dev_clk; +#endif + struct dram_info *priv = dev_get_priv(dev); + +#if CONFIG_IS_ENABLED(OF_PLATDATA) + ret = conv_of_platdata(dev); + if (ret) + return ret; +#endif + + priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); + debug("%s: pmugrf=%p\n", __func__, priv->pmugrf); + +#ifdef CONFIG_TPL_BUILD + pctl = regmap_get_range(plat->map, 0); + ddrphy = regmap_get_range(plat->map, 1); + msch = syscon_get_first_range(ROCKCHIP_SYSCON_MSCH); + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + + priv->pctl = pctl; + priv->phy = ddrphy; + priv->msch = msch; + priv->grf = grf; + + ret = rockchip_get_clk(&dev_clk); + if (ret) + return ret; + priv->ddr_clk.id = CLK_DDR; + ret = clk_request(dev_clk, &priv->ddr_clk); + if (ret) + return ret; + + cru = rockchip_get_cru(); + priv->cru = cru; + if (IS_ERR(priv->cru)) + return PTR_ERR(priv->cru); + + ret = setup_sdram(dev); + if (ret) + return ret; +#endif + + priv->info.base = 0; + priv->info.size = + rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg[2]); + + /* + * we use the 0x00000000~0xfdffffff space since 0xff000000~0xffffffff + * is SoC register space (i.e. reserved), and 0xfe000000~0xfeffffff is + * inaccessible for some IP controller. + */ + priv->info.size = min(priv->info.size, (size_t)0xfe000000); + + return 0; +} + +static int rk3368_dmc_get_info(struct udevice *dev, struct ram_info *info) +{ + struct dram_info *priv = dev_get_priv(dev); + + *info = priv->info; + return 0; +} + +static struct ram_ops rk3368_dmc_ops = { + .get_info = rk3368_dmc_get_info, +}; + + +static const struct udevice_id rk3368_dmc_ids[] = { + { .compatible = "rockchip,rk3368-dmc" }, + { } +}; + +U_BOOT_DRIVER(dmc_rk3368) = { + .name = "rockchip_rk3368_dmc", + .id = UCLASS_RAM, + .of_match = rk3368_dmc_ids, + .ops = &rk3368_dmc_ops, + .probe = rk3368_dmc_probe, + .priv_auto_alloc_size = sizeof(struct dram_info), + .ofdata_to_platdata = rk3368_dmc_ofdata_to_platdata, + .probe = rk3368_dmc_probe, + .priv_auto_alloc_size = sizeof(struct dram_info), + .platdata_auto_alloc_size = sizeof(struct rk3368_sdram_params), +}; diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c index 95083f0d72..2ddfd4ea5c 100644 --- a/drivers/rtc/m41t60.c +++ b/drivers/rtc/m41t60.c @@ -200,7 +200,7 @@ int rtc_set(struct rtc_time *tmp) void rtc_reset(void) { uchar *const data = rtc_validate(); - char const *const s = getenv("rtccal"); + char const *const s = env_get("rtccal"); if (!data) return; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index f192ca597c..1a65a3f9b9 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -682,7 +682,7 @@ int scsi_scan(bool verbose) printf("Found %d device(s).\n", scsi_max_devs); #ifndef CONFIG_SPL_BUILD - setenv_ulong("scsidevs", scsi_max_devs); + env_set_ulong("scsidevs", scsi_max_devs); #endif return 0; } diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index 29799dce93..353109c070 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -526,9 +526,9 @@ int drv_usbtty_init (void) int snlen; /* Ger seiral number */ - if (!(sn = getenv("serial#"))) { + sn = env_get("serial#"); + if (!sn) sn = "000000000000"; - } snlen = strlen(sn); if (snlen > sizeof(serial_number) - 1) { printf ("Warning: serial number %s is too long (%d > %lu)\n", @@ -540,10 +540,9 @@ int drv_usbtty_init (void) /* Decide on which type of UDC device to be. */ - - if(!(tt = getenv("usbtty"))) { + tt = env_get("usbtty"); + if (!tt) tt = "generic"; - } usbtty_init_terminal_type(strcmp(tt,"cdc_acm")); /* prepare buffers... */ diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8a8e8e480f..3c5582a950 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -188,13 +188,6 @@ config ZYNQ_QSPI Zynq QSPI IP core. This IP is used to connect the flash in 4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel. -config OMAP3_SPI - bool "McSPI driver for OMAP" - help - SPI master controller for OMAP24XX and later Multichannel SPI - (McSPI). This driver be used to access SPI chips on platforms - embedding this OMAP3 McSPI IP core. - endif # if DM_SPI config SOFT_SPI @@ -229,4 +222,11 @@ config MPC8XX_SPI help Enable support for SPI on MPC8XX +config OMAP3_SPI + bool "McSPI driver for OMAP" + help + SPI master controller for OMAP24XX and later Multichannel SPI + (McSPI). This driver be used to access SPI chips on platforms + embedding this OMAP3 McSPI IP core. + endmenu # menu "SPI Support" diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c index 7921ea0d75..c70d636277 100644 --- a/drivers/spi/rk_spi.c +++ b/drivers/spi/rk_spi.c @@ -210,6 +210,14 @@ static int rockchip_spi_ofdata_to_platdata(struct udevice *bus) static int rockchip_spi_calc_modclk(ulong max_freq) { + /* + * While this is not strictly correct for the RK3368, as the + * GPLL will be 576MHz, things will still work, as the + * clk_set_rate(...) implementation in our clock-driver will + * chose the next closest rate not exceeding what we request + * based on the output of this function. + */ + unsigned div; const unsigned long gpll_hz = 594000000UL; @@ -443,6 +451,7 @@ static const struct dm_spi_ops rockchip_spi_ops = { static const struct udevice_id rockchip_spi_ids[] = { { .compatible = "rockchip,rk3288-spi" }, + { .compatible = "rockchip,rk3368-spi" }, { .compatible = "rockchip,rk3399-spi" }, { } }; diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index c666303331..13f122350b 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -9,6 +9,24 @@ config TIMER will be used. The timer is usually a 32 bits free-running up counter. There may be no real tick, and no timer interrupt. +config SPL_TIMER + bool "Enable driver model for timer drivers in SPL" + depends on TIMER && SPL + help + Enable support for timer drivers in SPL. These can be used to get + a timer value when in SPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + SPL build. + +config TPL_TIMER + bool "Enable driver model for timer drivers in TPL" + depends on TIMER && TPL + help + Enable support for timer drivers in TPL. These can be used to get + a timer value when in TPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + TPL build. + config TIMER_EARLY bool "Allow timer to be used early in U-Boot" depends on TIMER @@ -85,4 +103,11 @@ config AE3XX_TIMER help Select this to enable a timer for AE3XX devices. +config ROCKCHIP_TIMER + bool "Rockchip timer support" + depends on TIMER + help + Select this to enable support for the timer found on + Rockchip devices. + endmenu diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile index ced7bd66bd..fa7ce7c835 100644 --- a/drivers/timer/Makefile +++ b/drivers/timer/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_TIMER) += timer-uclass.o +obj-y += timer-uclass.o obj-$(CONFIG_ALTERA_TIMER) += altera_timer.o obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o @@ -14,3 +14,4 @@ obj-$(CONFIG_STI_TIMER) += sti-timer.o obj-$(CONFIG_ARC_TIMER) += arc_timer.o obj-$(CONFIG_AG101P_TIMER) += ag101p_timer.o obj-$(CONFIG_AE3XX_TIMER) += ae3xx_timer.o +obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o diff --git a/drivers/timer/rockchip_timer.c b/drivers/timer/rockchip_timer.c new file mode 100644 index 0000000000..0848033c66 --- /dev/null +++ b/drivers/timer/rockchip_timer.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <mapmem.h> +#include <asm/arch/timer.h> +#include <dt-structs.h> +#include <timer.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +struct rockchip_timer_plat { + struct dtd_rockchip_rk3368_timer dtd; +}; +#endif + +/* Driver private data. Contains timer id. Could be either 0 or 1. */ +struct rockchip_timer_priv { + struct rk_timer *timer; +}; + +static int rockchip_timer_get_count(struct udevice *dev, u64 *count) +{ + struct rockchip_timer_priv *priv = dev_get_priv(dev); + uint64_t timebase_h, timebase_l; + uint64_t cntr; + + timebase_l = readl(&priv->timer->timer_curr_value0); + timebase_h = readl(&priv->timer->timer_curr_value1); + + /* timers are down-counting */ + cntr = timebase_h << 32 | timebase_l; + *count = ~0ull - cntr; + return 0; +} + +static int rockchip_clk_ofdata_to_platdata(struct udevice *dev) +{ +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + struct rockchip_timer_priv *priv = dev_get_priv(dev); + + priv->timer = (struct rk_timer *)devfdt_get_addr(dev); +#endif + + return 0; +} + +static int rockchip_timer_start(struct udevice *dev) +{ + struct rockchip_timer_priv *priv = dev_get_priv(dev); + const uint64_t reload_val = ~0uLL; + const uint32_t reload_val_l = reload_val & 0xffffffff; + const uint32_t reload_val_h = reload_val >> 32; + + /* disable timer and reset all control */ + writel(0, &priv->timer->timer_ctrl_reg); + /* write reload value */ + writel(reload_val_l, &priv->timer->timer_load_count0); + writel(reload_val_h, &priv->timer->timer_load_count1); + /* enable timer */ + writel(1, &priv->timer->timer_ctrl_reg); + + return 0; +} + +static int rockchip_timer_probe(struct udevice *dev) +{ +#if CONFIG_IS_ENABLED(OF_PLATDATA) + struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct rockchip_timer_priv *priv = dev_get_priv(dev); + struct rockchip_timer_plat *plat = dev_get_platdata(dev); + + priv->timer = map_sysmem(plat->dtd.reg[1], plat->dtd.reg[3]); + uc_priv->clock_rate = plat->dtd.clock_frequency; +#endif + + return rockchip_timer_start(dev); +} + +static const struct timer_ops rockchip_timer_ops = { + .get_count = rockchip_timer_get_count, +}; + +static const struct udevice_id rockchip_timer_ids[] = { + { .compatible = "rockchip,rk3368-timer" }, + {} +}; + +U_BOOT_DRIVER(arc_timer) = { + .name = "rockchip_rk3368_timer", + .id = UCLASS_TIMER, + .of_match = rockchip_timer_ids, + .probe = rockchip_timer_probe, + .ops = &rockchip_timer_ops, + .flags = DM_FLAG_PRE_RELOC, + .priv_auto_alloc_size = sizeof(struct rockchip_timer_priv), +#if CONFIG_IS_ENABLED(OF_PLATDATA) + .platdata_auto_alloc_size = sizeof(struct rockchip_timer_plat), +#endif + .ofdata_to_platdata = rockchip_clk_ofdata_to_platdata, +}; diff --git a/drivers/timer/timer-uclass.c b/drivers/timer/timer-uclass.c index ec10b28288..a84755f4c5 100644 --- a/drivers/timer/timer-uclass.c +++ b/drivers/timer/timer-uclass.c @@ -42,6 +42,7 @@ unsigned long notrace timer_get_rate(struct udevice *dev) static int timer_pre_probe(struct udevice *dev) { +#if !CONFIG_IS_ENABLED(OF_PLATDATA) struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); struct clk timer_clk; int err; @@ -56,6 +57,7 @@ static int timer_pre_probe(struct udevice *dev) } else uc_priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "clock-frequency", 0); +#endif return 0; } @@ -81,16 +83,18 @@ u64 timer_conv_64(u32 count) int notrace dm_timer_init(void) { - const void *blob = gd->fdt_blob; + __maybe_unused const void *blob = gd->fdt_blob; struct udevice *dev = NULL; - int node; + int node = -ENOENT; int ret; if (gd->timer) return 0; +#if !CONFIG_IS_ENABLED(OF_PLATDATA) /* Check for a chosen timer to be used for tick */ node = fdtdec_get_chosen_node(blob, "tick-timer"); +#endif if (node < 0) { /* No chosen timer, trying first available timer */ ret = uclass_first_device_err(UCLASS_TIMER, &dev); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index da3ec2fa75..62126aad2f 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -94,4 +94,6 @@ endif source "drivers/usb/gadget/Kconfig" +source "drivers/usb/eth/Kconfig" + endif diff --git a/drivers/usb/eth/Kconfig b/drivers/usb/eth/Kconfig new file mode 100644 index 0000000000..14cfa26cdf --- /dev/null +++ b/drivers/usb/eth/Kconfig @@ -0,0 +1,17 @@ +comment "USB to Ethernet Controller Drivers" + +config USB_ETHER_LAN75XX + bool "Microchip LAN75XX support" + ---help--- + Say Y here if you would like to support Microchip LAN75XX Hi-Speed + USB 2.0 to 10/100/1000 Gigabit Ethernet controller. + Supports 10Base-T/ 100Base-TX/1000Base-T. + This driver supports the internal PHY. + +config USB_ETHER_LAN78XX + bool "Microchip LAN78XX support" + ---help--- + Say Y here if you would like to support Microchip LAN78XX USB 3.1 + Gen 1 to 10/100/1000 Gigabit Ethernet controller. + Supports 10Base-T/ 100Base-TX/1000Base-T. + This driver supports the internal PHY. diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile index 4c44efc7a1..4b935a3f04 100644 --- a/drivers/usb/eth/Makefile +++ b/drivers/usb/eth/Makefile @@ -9,4 +9,6 @@ obj-$(CONFIG_USB_ETHER_ASIX) += asix.o obj-$(CONFIG_USB_ETHER_ASIX88179) += asix88179.o obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o +obj-$(CONFIG_USB_ETHER_LAN75XX) += lan7x.o lan75xx.o +obj-$(CONFIG_USB_ETHER_LAN78XX) += lan7x.o lan78xx.o obj-$(CONFIG_USB_ETHER_RTL8152) += r8152.o r8152_fw.o diff --git a/drivers/usb/eth/lan75xx.c b/drivers/usb/eth/lan75xx.c new file mode 100644 index 0000000000..1c8015805a --- /dev/null +++ b/drivers/usb/eth/lan75xx.c @@ -0,0 +1,315 @@ +/* + * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm.h> +#include <usb.h> +#include <linux/mii.h> +#include "usb_ether.h" +#include "lan7x.h" + +/* LAN75xx specific register/bit defines */ +#define LAN75XX_HW_CFG_BIR BIT(7) + +#define LAN75XX_BURST_CAP 0x034 + +#define LAN75XX_BULK_IN_DLY 0x03C + +#define LAN75XX_RFE_CTL 0x060 + +#define LAN75XX_FCT_RX_CTL 0x090 + +#define LAN75XX_FCT_TX_CTL 0x094 + +#define LAN75XX_FCT_RX_FIFO_END 0x098 + +#define LAN75XX_FCT_TX_FIFO_END 0x09C + +#define LAN75XX_FCT_FLOW 0x0A0 + +/* MAC ADDRESS PERFECT FILTER For LAN75xx */ +#define LAN75XX_ADDR_FILTX 0x300 +#define LAN75XX_ADDR_FILTX_FB_VALID BIT(31) + +/* + * Lan75xx infrastructure commands + */ +static int lan75xx_phy_gig_workaround(struct usb_device *udev, + struct ueth_data *dev) +{ + int ret = 0; + + /* Only internal phy */ + /* Set the phy in Gig loopback */ + lan7x_mdio_write(udev, dev->phy_id, MII_BMCR, + (BMCR_LOOPBACK | BMCR_SPEED1000)); + + /* Wait for the link up */ + ret = lan7x_mdio_wait_for_bit(udev, "BMSR_LSTATUS", + dev->phy_id, MII_BMSR, BMSR_LSTATUS, + true, PHY_CONNECT_TIMEOUT_MS, 1); + if (ret) + return ret; + + /* phy reset */ + return lan7x_pmt_phy_reset(udev, dev); +} + +static int lan75xx_update_flowcontrol(struct usb_device *udev, + struct ueth_data *dev) +{ + uint32_t flow = 0, fct_flow = 0; + int ret; + + ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN75XX_FCT_FLOW, fct_flow); + if (ret) + return ret; + return lan7x_write_reg(udev, FLOW, flow); +} + +static int lan75xx_set_receive_filter(struct usb_device *udev) +{ + /* No multicast in u-boot */ + return lan7x_write_reg(udev, LAN75XX_RFE_CTL, + RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT); +} + +/* starts the TX path */ +static void lan75xx_start_tx_path(struct usb_device *udev) +{ + /* Enable Tx at MAC */ + lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN); + + /* Enable Tx at SCSRs */ + lan7x_write_reg(udev, LAN75XX_FCT_TX_CTL, FCT_TX_CTL_EN); +} + +/* Starts the Receive path */ +static void lan75xx_start_rx_path(struct usb_device *udev) +{ + /* Enable Rx at MAC */ + lan7x_write_reg(udev, MAC_RX, + LAN7X_MAC_RX_MAX_SIZE_DEFAULT | + MAC_RX_FCS_STRIP | MAC_RX_RXEN); + + /* Enable Rx at SCSRs */ + lan7x_write_reg(udev, LAN75XX_FCT_RX_CTL, FCT_RX_CTL_EN); +} + +static int lan75xx_basic_reset(struct usb_device *udev, + struct ueth_data *dev, + struct lan7x_private *priv) +{ + int ret; + u32 val; + + ret = lan7x_basic_reset(udev, dev); + if (ret) + return ret; + + /* Keep the chip ID */ + ret = lan7x_read_reg(udev, ID_REV, &val); + if (ret) + return ret; + debug("LAN75xx ID_REV = 0x%08x\n", val); + + priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16; + + /* Respond to the IN token with a NAK */ + ret = lan7x_read_reg(udev, HW_CFG, &val); + if (ret) + return ret; + val |= LAN75XX_HW_CFG_BIR; + return lan7x_write_reg(udev, HW_CFG, val); +} + +int lan75xx_write_hwaddr(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + unsigned char *enetaddr = pdata->enetaddr; + u32 addr_lo = get_unaligned_le32(&enetaddr[0]); + u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]); + int ret; + + /* set hardware address */ + ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN75XX_ADDR_FILTX + 4, addr_lo); + if (ret) + return ret; + + addr_hi |= LAN75XX_ADDR_FILTX_FB_VALID; + ret = lan7x_write_reg(udev, LAN75XX_ADDR_FILTX, addr_hi); + if (ret) + return ret; + + debug("MAC addr %pM written\n", enetaddr); + + return 0; +} + +static int lan75xx_eth_start(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct lan7x_private *priv = dev_get_priv(dev); + struct ueth_data *ueth = &priv->ueth; + int ret; + u32 write_buf; + + /* Reset and read Mac addr were done in probe() */ + ret = lan75xx_write_hwaddr(dev); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN75XX_BURST_CAP, 0); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN75XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); + if (ret) + return ret; + + /* set FIFO sizes */ + write_buf = (MAX_RX_FIFO_SIZE - 512) / 512; + ret = lan7x_write_reg(udev, LAN75XX_FCT_RX_FIFO_END, write_buf); + if (ret) + return ret; + + write_buf = (MAX_TX_FIFO_SIZE - 512) / 512; + ret = lan7x_write_reg(udev, LAN75XX_FCT_TX_FIFO_END, write_buf); + if (ret) + return ret; + + /* Init Tx */ + ret = lan7x_write_reg(udev, FLOW, 0); + if (ret) + return ret; + + /* Init Rx. Set Vlan, keep default for VLAN on 75xx */ + ret = lan75xx_set_receive_filter(udev); + if (ret) + return ret; + + /* phy workaround for gig link */ + ret = lan75xx_phy_gig_workaround(udev, ueth); + if (ret) + return ret; + + /* Init PHY, autonego, and link */ + ret = lan7x_eth_phylib_connect(dev, &priv->ueth); + if (ret) + return ret; + ret = lan7x_eth_phylib_config_start(dev); + if (ret) + return ret; + + /* + * MAC_CR has to be set after PHY init. + * MAC will auto detect the PHY speed. + */ + ret = lan7x_read_reg(udev, MAC_CR, &write_buf); + if (ret) + return ret; + write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP; + ret = lan7x_write_reg(udev, MAC_CR, write_buf); + if (ret) + return ret; + + lan75xx_start_tx_path(udev); + lan75xx_start_rx_path(udev); + + return lan75xx_update_flowcontrol(udev, ueth); +} + +int lan75xx_read_rom_hwaddr(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + int ret; + + /* + * Refer to the doc/README.enetaddr and doc/README.usb for + * the U-Boot MAC address policy + */ + ret = lan7x_read_eeprom_mac(pdata->enetaddr, udev); + if (ret) + memset(pdata->enetaddr, 0, 6); + + return 0; +} + +static int lan75xx_eth_probe(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct lan7x_private *priv = dev_get_priv(dev); + struct ueth_data *ueth = &priv->ueth; + struct eth_pdata *pdata = dev_get_platdata(dev); + int ret; + + /* Do a reset in order to get the MAC address from HW */ + if (lan75xx_basic_reset(udev, ueth, priv)) + return 0; + + /* Get the MAC address */ + /* + * We must set the eth->enetaddr from HW because the upper layer + * will force to use the environmental var (usbethaddr) or random if + * there is no valid MAC address in eth->enetaddr. + * + * Refer to the doc/README.enetaddr and doc/README.usb for + * the U-Boot MAC address policy + */ + lan7x_read_eeprom_mac(pdata->enetaddr, udev); + /* Do not return 0 for not finding MAC addr in HW */ + + ret = usb_ether_register(dev, ueth, RX_URB_SIZE); + if (ret) + return ret; + + /* Register phylib */ + return lan7x_phylib_register(dev); +} + +static const struct eth_ops lan75xx_eth_ops = { + .start = lan75xx_eth_start, + .send = lan7x_eth_send, + .recv = lan7x_eth_recv, + .free_pkt = lan7x_free_pkt, + .stop = lan7x_eth_stop, + .write_hwaddr = lan75xx_write_hwaddr, + .read_rom_hwaddr = lan75xx_read_rom_hwaddr, +}; + +U_BOOT_DRIVER(lan75xx_eth) = { + .name = "lan75xx_eth", + .id = UCLASS_ETH, + .probe = lan75xx_eth_probe, + .remove = lan7x_eth_remove, + .ops = &lan75xx_eth_ops, + .priv_auto_alloc_size = sizeof(struct lan7x_private), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; + +static const struct usb_device_id lan75xx_eth_id_table[] = { + { USB_DEVICE(0x0424, 0x7500) }, /* LAN7500 USB Ethernet */ + { } /* Terminating entry */ +}; + +U_BOOT_USB_DEVICE(lan75xx_eth, lan75xx_eth_id_table); diff --git a/drivers/usb/eth/lan78xx.c b/drivers/usb/eth/lan78xx.c new file mode 100644 index 0000000000..d1e61c32da --- /dev/null +++ b/drivers/usb/eth/lan78xx.c @@ -0,0 +1,477 @@ +/* + * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm.h> +#include <usb.h> +#include "usb_ether.h" +#include "lan7x.h" + +/* LAN78xx specific register/bit defines */ +#define LAN78XX_HW_CFG_LED1_EN BIT(21) /* Muxed with EEDO */ +#define LAN78XX_HW_CFG_LED0_EN BIT(20) /* Muxed with EECLK */ + +#define LAN78XX_USB_CFG0 0x080 +#define LAN78XX_USB_CFG0_BIR BIT(6) + +#define LAN78XX_BURST_CAP 0x090 + +#define LAN78XX_BULK_IN_DLY 0x094 + +#define LAN78XX_RFE_CTL 0x0B0 + +#define LAN78XX_FCT_RX_CTL 0x0C0 + +#define LAN78XX_FCT_TX_CTL 0x0C4 + +#define LAN78XX_FCT_RX_FIFO_END 0x0C8 + +#define LAN78XX_FCT_TX_FIFO_END 0x0CC + +#define LAN78XX_FCT_FLOW 0x0D0 + +#define LAN78XX_MAF_BASE 0x400 +#define LAN78XX_MAF_HIX 0x00 +#define LAN78XX_MAF_LOX 0x04 +#define LAN78XX_MAF_HI_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_HIX) +#define LAN78XX_MAF_LO_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_LOX) +#define LAN78XX_MAF_HI(index) (LAN78XX_MAF_BASE + (8 * (index)) + \ + LAN78XX_MAF_HIX) +#define LAN78XX_MAF_LO(index) (LAN78XX_MAF_BASE + (8 * (index)) + \ + LAN78XX_MAF_LOX) +#define LAN78XX_MAF_HI_VALID BIT(31) + +/* OTP registers */ +#define LAN78XX_OTP_BASE_ADDR 0x00001000 + +#define LAN78XX_OTP_PWR_DN (LAN78XX_OTP_BASE_ADDR + 4 * 0x00) +#define LAN78XX_OTP_PWR_DN_PWRDN_N BIT(0) + +#define LAN78XX_OTP_ADDR1 (LAN78XX_OTP_BASE_ADDR + 4 * 0x01) +#define LAN78XX_OTP_ADDR1_15_11 0x1F + +#define LAN78XX_OTP_ADDR2 (LAN78XX_OTP_BASE_ADDR + 4 * 0x02) +#define LAN78XX_OTP_ADDR2_10_3 0xFF + +#define LAN78XX_OTP_RD_DATA (LAN78XX_OTP_BASE_ADDR + 4 * 0x06) + +#define LAN78XX_OTP_FUNC_CMD (LAN78XX_OTP_BASE_ADDR + 4 * 0x08) +#define LAN78XX_OTP_FUNC_CMD_READ BIT(0) + +#define LAN78XX_OTP_CMD_GO (LAN78XX_OTP_BASE_ADDR + 4 * 0x0A) +#define LAN78XX_OTP_CMD_GO_GO BIT(0) + +#define LAN78XX_OTP_STATUS (LAN78XX_OTP_BASE_ADDR + 4 * 0x0C) +#define LAN78XX_OTP_STATUS_BUSY BIT(0) + +#define LAN78XX_OTP_INDICATOR_1 0xF3 +#define LAN78XX_OTP_INDICATOR_2 0xF7 + +/* + * Lan78xx infrastructure commands + */ +static int lan78xx_read_raw_otp(struct usb_device *udev, u32 offset, + u32 length, u8 *data) +{ + int i; + int ret; + u32 buf; + + ret = lan7x_read_reg(udev, LAN78XX_OTP_PWR_DN, &buf); + if (ret) + return ret; + + if (buf & LAN78XX_OTP_PWR_DN_PWRDN_N) { + /* clear it and wait to be cleared */ + ret = lan7x_write_reg(udev, LAN78XX_OTP_PWR_DN, 0); + if (ret) + return ret; + + ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_PWR_DN_PWRDN_N", + LAN78XX_OTP_PWR_DN, + LAN78XX_OTP_PWR_DN_PWRDN_N, + false, 1000, 0); + if (ret) + return ret; + } + + for (i = 0; i < length; i++) { + ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR1, + ((offset + i) >> 8) & + LAN78XX_OTP_ADDR1_15_11); + if (ret) + return ret; + ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR2, + ((offset + i) & LAN78XX_OTP_ADDR2_10_3)); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_OTP_FUNC_CMD, + LAN78XX_OTP_FUNC_CMD_READ); + if (ret) + return ret; + ret = lan7x_write_reg(udev, LAN78XX_OTP_CMD_GO, + LAN78XX_OTP_CMD_GO_GO); + + if (ret) + return ret; + + ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_STATUS_BUSY", + LAN78XX_OTP_STATUS, + LAN78XX_OTP_STATUS_BUSY, + false, 1000, 0); + if (ret) + return ret; + + ret = lan7x_read_reg(udev, LAN78XX_OTP_RD_DATA, &buf); + if (ret) + return ret; + + data[i] = (u8)(buf & 0xFF); + } + + return 0; +} + +static int lan78xx_read_otp(struct usb_device *udev, u32 offset, + u32 length, u8 *data) +{ + u8 sig; + int ret; + + ret = lan78xx_read_raw_otp(udev, 0, 1, &sig); + + if (!ret) { + if (sig == LAN78XX_OTP_INDICATOR_1) + offset = offset; + else if (sig == LAN78XX_OTP_INDICATOR_2) + offset += 0x100; + else + return -EINVAL; + ret = lan78xx_read_raw_otp(udev, offset, length, data); + if (ret) + return ret; + } + debug("LAN78x: MAC address from OTP = %pM\n", data); + + return ret; +} + +static int lan78xx_read_otp_mac(unsigned char *enetaddr, + struct usb_device *udev) +{ + int ret; + + memset(enetaddr, 0, 6); + + ret = lan78xx_read_otp(udev, + EEPROM_MAC_OFFSET, + ETH_ALEN, + enetaddr); + if (!ret && is_valid_ethaddr(enetaddr)) { + /* eeprom values are valid so use them */ + debug("MAC address read from OTP %pM\n", enetaddr); + return 0; + } + debug("MAC address read from OTP invalid %pM\n", enetaddr); + + memset(enetaddr, 0, 6); + return -EINVAL; +} + +static int lan78xx_update_flowcontrol(struct usb_device *udev, + struct ueth_data *dev) +{ + uint32_t flow = 0, fct_flow = 0; + int ret; + + ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_FCT_FLOW, fct_flow); + if (ret) + return ret; + return lan7x_write_reg(udev, FLOW, flow); +} + +static int lan78xx_read_mac(unsigned char *enetaddr, + struct usb_device *udev, + struct lan7x_private *priv) +{ + u32 val; + int ret; + int saved = 0, done = 0; + + /* + * Depends on chip, some EEPROM pins are muxed with LED function. + * disable & restore LED function to access EEPROM. + */ + if ((priv->chipid == ID_REV_CHIP_ID_7800) || + (priv->chipid == ID_REV_CHIP_ID_7850)) { + ret = lan7x_read_reg(udev, HW_CFG, &val); + if (ret) + return ret; + saved = val; + val &= ~(LAN78XX_HW_CFG_LED1_EN | LAN78XX_HW_CFG_LED0_EN); + ret = lan7x_write_reg(udev, HW_CFG, val); + if (ret) + goto restore; + } + + /* + * Refer to the doc/README.enetaddr and doc/README.usb for + * the U-Boot MAC address policy + */ + /* try reading mac address from EEPROM, then from OTP */ + ret = lan7x_read_eeprom_mac(enetaddr, udev); + if (!ret) + done = 1; + +restore: + if ((priv->chipid == ID_REV_CHIP_ID_7800) || + (priv->chipid == ID_REV_CHIP_ID_7850)) { + ret = lan7x_write_reg(udev, HW_CFG, saved); + if (ret) + return ret; + } + /* if the EEPROM mac address is good, then exit */ + if (done) + return 0; + + /* try reading mac address from OTP if the device is LAN78xx */ + return lan78xx_read_otp_mac(enetaddr, udev); +} + +static int lan78xx_set_receive_filter(struct usb_device *udev) +{ + /* No multicast in u-boot for now */ + return lan7x_write_reg(udev, LAN78XX_RFE_CTL, + RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT); +} + +/* starts the TX path */ +static void lan78xx_start_tx_path(struct usb_device *udev) +{ + /* Enable Tx at MAC */ + lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN); + + /* Enable Tx at SCSRs */ + lan7x_write_reg(udev, LAN78XX_FCT_TX_CTL, FCT_TX_CTL_EN); +} + +/* Starts the Receive path */ +static void lan78xx_start_rx_path(struct usb_device *udev) +{ + /* Enable Rx at MAC */ + lan7x_write_reg(udev, MAC_RX, + LAN7X_MAC_RX_MAX_SIZE_DEFAULT | + MAC_RX_FCS_STRIP | MAC_RX_RXEN); + + /* Enable Rx at SCSRs */ + lan7x_write_reg(udev, LAN78XX_FCT_RX_CTL, FCT_RX_CTL_EN); +} + +static int lan78xx_basic_reset(struct usb_device *udev, + struct ueth_data *dev, + struct lan7x_private *priv) +{ + int ret; + u32 val; + + ret = lan7x_basic_reset(udev, dev); + if (ret) + return ret; + + /* Keep the chip ID */ + ret = lan7x_read_reg(udev, ID_REV, &val); + if (ret) + return ret; + debug("LAN78xx ID_REV = 0x%08x\n", val); + + priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16; + + /* Respond to the IN token with a NAK */ + ret = lan7x_read_reg(udev, LAN78XX_USB_CFG0, &val); + if (ret) + return ret; + val |= LAN78XX_USB_CFG0_BIR; + return lan7x_write_reg(udev, LAN78XX_USB_CFG0, val); +} + +int lan78xx_write_hwaddr(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + unsigned char *enetaddr = pdata->enetaddr; + u32 addr_lo = get_unaligned_le32(&enetaddr[0]); + u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]); + int ret; + + /* set hardware address */ + ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_MAF_LO(0), addr_lo); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_MAF_HI(0), + addr_hi | LAN78XX_MAF_HI_VALID); + if (ret) + return ret; + + debug("MAC addr %pM written\n", enetaddr); + + return 0; +} + +static int lan78xx_eth_start(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct lan7x_private *priv = dev_get_priv(dev); + + int ret; + u32 write_buf; + + /* Reset and read Mac addr were done in probe() */ + ret = lan78xx_write_hwaddr(dev); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_BURST_CAP, 0); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF); + if (ret) + return ret; + + /* set FIFO sizes */ + ret = lan7x_write_reg(udev, LAN78XX_FCT_RX_FIFO_END, + (MAX_RX_FIFO_SIZE - 512) / 512); + if (ret) + return ret; + + ret = lan7x_write_reg(udev, LAN78XX_FCT_TX_FIFO_END, + (MAX_TX_FIFO_SIZE - 512) / 512); + if (ret) + return ret; + + /* Init Tx */ + ret = lan7x_write_reg(udev, FLOW, 0); + if (ret) + return ret; + + /* Init Rx. Set Vlan, keep default for VLAN on 78xx */ + ret = lan78xx_set_receive_filter(udev); + if (ret) + return ret; + + /* Init PHY, autonego, and link */ + ret = lan7x_eth_phylib_connect(dev, &priv->ueth); + if (ret) + return ret; + ret = lan7x_eth_phylib_config_start(dev); + if (ret) + return ret; + + /* + * MAC_CR has to be set after PHY init. + * MAC will auto detect the PHY speed. + */ + ret = lan7x_read_reg(udev, MAC_CR, &write_buf); + if (ret) + return ret; + write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP; + ret = lan7x_write_reg(udev, MAC_CR, write_buf); + if (ret) + return ret; + + lan78xx_start_tx_path(udev); + lan78xx_start_rx_path(udev); + + return lan78xx_update_flowcontrol(udev, &priv->ueth); +} + +int lan78xx_read_rom_hwaddr(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + struct lan7x_private *priv = dev_get_priv(dev); + int ret; + + ret = lan78xx_read_mac(pdata->enetaddr, udev, priv); + if (ret) + memset(pdata->enetaddr, 0, 6); + + return 0; +} + +static int lan78xx_eth_probe(struct udevice *dev) +{ + struct usb_device *udev = dev_get_parent_priv(dev); + struct lan7x_private *priv = dev_get_priv(dev); + struct ueth_data *ueth = &priv->ueth; + struct eth_pdata *pdata = dev_get_platdata(dev); + int ret; + + /* Do a reset in order to get the MAC address from HW */ + if (lan78xx_basic_reset(udev, ueth, priv)) + return 0; + + /* Get the MAC address */ + /* + * We must set the eth->enetaddr from HW because the upper layer + * will force to use the environmental var (usbethaddr) or random if + * there is no valid MAC address in eth->enetaddr. + */ + lan78xx_read_mac(pdata->enetaddr, udev, priv); + /* Do not return 0 for not finding MAC addr in HW */ + + ret = usb_ether_register(dev, ueth, RX_URB_SIZE); + if (ret) + return ret; + + /* Register phylib */ + return lan7x_phylib_register(dev); +} + +static const struct eth_ops lan78xx_eth_ops = { + .start = lan78xx_eth_start, + .send = lan7x_eth_send, + .recv = lan7x_eth_recv, + .free_pkt = lan7x_free_pkt, + .stop = lan7x_eth_stop, + .write_hwaddr = lan78xx_write_hwaddr, + .read_rom_hwaddr = lan78xx_read_rom_hwaddr, +}; + +U_BOOT_DRIVER(lan78xx_eth) = { + .name = "lan78xx_eth", + .id = UCLASS_ETH, + .probe = lan78xx_eth_probe, + .remove = lan7x_eth_remove, + .ops = &lan78xx_eth_ops, + .priv_auto_alloc_size = sizeof(struct lan7x_private), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; + +static const struct usb_device_id lan78xx_eth_id_table[] = { + { USB_DEVICE(0x0424, 0x7800) }, /* LAN7800 USB Ethernet */ + { USB_DEVICE(0x0424, 0x7850) }, /* LAN7850 USB Ethernet */ + { } /* Terminating entry */ +}; + +U_BOOT_USB_DEVICE(lan78xx_eth, lan78xx_eth_id_table); diff --git a/drivers/usb/eth/lan7x.c b/drivers/usb/eth/lan7x.c new file mode 100644 index 0000000000..222d327bdd --- /dev/null +++ b/drivers/usb/eth/lan7x.c @@ -0,0 +1,499 @@ +/* + * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <dm.h> +#include <malloc.h> +#include <miiphy.h> +#include <memalign.h> +#include <usb.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include "usb_ether.h" +#include "lan7x.h" + +/* + * Lan7x infrastructure commands + */ +int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data) +{ + int len; + ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); + + cpu_to_le32s(&data); + tmpbuf[0] = data; + + len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_VENDOR_REQUEST_WRITE_REGISTER, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, tmpbuf, sizeof(data), + USB_CTRL_SET_TIMEOUT_MS); + if (len != sizeof(data)) { + debug("%s failed: index=%d, data=%d, len=%d", + __func__, index, data, len); + return -EIO; + } + return 0; +} + +int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data) +{ + int len; + ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); + + len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + USB_VENDOR_REQUEST_READ_REGISTER, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, tmpbuf, sizeof(*data), + USB_CTRL_GET_TIMEOUT_MS); + *data = tmpbuf[0]; + if (len != sizeof(*data)) { + debug("%s failed: index=%d, len=%d", __func__, index, len); + return -EIO; + } + + le32_to_cpus(data); + return 0; +} + +static int lan7x_phy_wait_not_busy(struct usb_device *udev) +{ + return lan7x_wait_for_bit(udev, __func__, + MII_ACC, MII_ACC_MII_BUSY, + false, 100, 0); +} + +int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx) +{ + u32 val, addr; + + /* confirm MII not busy */ + if (lan7x_phy_wait_not_busy(udev)) { + debug("MII is busy in %s\n", __func__); + return -ETIMEDOUT; + } + + /* set the address, index & direction (read from PHY) */ + addr = (phy_id << 11) | (idx << 6) | + MII_ACC_MII_READ | MII_ACC_MII_BUSY; + lan7x_write_reg(udev, MII_ACC, addr); + + if (lan7x_phy_wait_not_busy(udev)) { + debug("Timed out reading MII reg %02X\n", idx); + return -ETIMEDOUT; + } + + lan7x_read_reg(udev, MII_DATA, &val); + + return val & 0xFFFF; +} + +void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval) +{ + u32 addr; + + /* confirm MII not busy */ + if (lan7x_phy_wait_not_busy(udev)) { + debug("MII is busy in %s\n", __func__); + return; + } + + lan7x_write_reg(udev, MII_DATA, regval); + + /* set the address, index & direction (write to PHY) */ + addr = (phy_id << 11) | (idx << 6) | + MII_ACC_MII_WRITE | MII_ACC_MII_BUSY; + lan7x_write_reg(udev, MII_ACC, addr); + + if (lan7x_phy_wait_not_busy(udev)) + debug("Timed out writing MII reg %02X\n", idx); +} + +/* + * Lan7x phylib wrappers + */ +static int lan7x_phylib_mdio_read(struct mii_dev *bus, + int addr, int devad, int reg) +{ + struct usb_device *udev = dev_get_parent_priv(bus->priv); + + return lan7x_mdio_read(udev, addr, reg); +} + +static int lan7x_phylib_mdio_write(struct mii_dev *bus, + int addr, int devad, int reg, u16 val) +{ + struct usb_device *udev = dev_get_parent_priv(bus->priv); + + lan7x_mdio_write(udev, addr, reg, (int)val); + + return 0; +} + +/* + * Lan7x eeprom functions + */ +static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev) +{ + return lan7x_wait_for_bit(udev, __func__, + E2P_CMD, E2P_CMD_EPC_BUSY, + false, 100, 0); +} + +static int lan7x_wait_eeprom(struct usb_device *udev) +{ + return lan7x_wait_for_bit(udev, __func__, + E2P_CMD, + (E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT), + false, 100, 0); +} + +static int lan7x_read_eeprom(struct usb_device *udev, + u32 offset, u32 length, u8 *data) +{ + u32 val; + int i, ret; + + ret = lan7x_eeprom_confirm_not_busy(udev); + if (ret) + return ret; + + for (i = 0; i < length; i++) { + val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ | + (offset & E2P_CMD_EPC_ADDR_MASK); + lan7x_write_reg(udev, E2P_CMD, val); + + ret = lan7x_wait_eeprom(udev); + if (ret) + return ret; + + lan7x_read_reg(udev, E2P_DATA, &val); + data[i] = val & 0xFF; + offset++; + } + return ret; +} + +/* + * Lan7x phylib functions + */ +int lan7x_phylib_register(struct udevice *udev) +{ + struct usb_device *usbdev = dev_get_parent_priv(udev); + struct lan7x_private *priv = dev_get_priv(udev); + int ret; + + priv->mdiobus = mdio_alloc(); + if (!priv->mdiobus) { + printf("mdio_alloc failed\n"); + return -ENOMEM; + } + priv->mdiobus->read = lan7x_phylib_mdio_read; + priv->mdiobus->write = lan7x_phylib_mdio_write; + sprintf(priv->mdiobus->name, + "lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr); + priv->mdiobus->priv = (void *)udev; + + ret = mdio_register(priv->mdiobus); + if (ret) { + printf("mdio_register failed\n"); + free(priv->mdiobus); + return -ENOMEM; + } + + return 0; +} + +int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev) +{ + struct lan7x_private *priv = dev_get_priv(udev); + + priv->phydev = phy_connect(priv->mdiobus, dev->phy_id, + udev, PHY_INTERFACE_MODE_MII); + + if (!priv->phydev) { + printf("phy_connect failed\n"); + return -ENODEV; + } + return 0; +} + +int lan7x_eth_phylib_config_start(struct udevice *udev) +{ + struct lan7x_private *priv = dev_get_priv(udev); + int ret; + + /* configure supported modes */ + priv->phydev->supported = PHY_BASIC_FEATURES | + SUPPORTED_1000baseT_Full | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause; + + priv->phydev->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Pause | + ADVERTISED_Asym_Pause | + ADVERTISED_Autoneg; + + priv->phydev->autoneg = AUTONEG_ENABLE; + + ret = genphy_config_aneg(priv->phydev); + if (ret) { + printf("genphy_config_aneg failed\n"); + return ret; + } + ret = phy_startup(priv->phydev); + if (ret) { + printf("phy_startup failed\n"); + return ret; + } + + debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__, + priv->phydev->speed, priv->phydev->duplex, + priv->phydev->advertising, priv->phydev->supported); + + return 0; +} + +int lan7x_update_flowcontrol(struct usb_device *udev, + struct ueth_data *dev, + uint32_t *flow, uint32_t *fct_flow) +{ + uint32_t lcladv, rmtadv; + u8 cap = 0; + struct lan7x_private *priv = dev_get_priv(udev->dev); + + debug("** %s()\n", __func__); + debug("** %s() priv->phydev->speed %i duplex %i\n", __func__, + priv->phydev->speed, priv->phydev->duplex); + + if (priv->phydev->duplex == DUPLEX_FULL) { + lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE); + rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA); + cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); + + debug("TX Flow "); + if (cap & FLOW_CTRL_TX) { + *flow = (FLOW_CR_TX_FCEN | 0xFFFF); + /* set fct_flow thresholds to 20% and 80% */ + *fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512)) + & 0x7FUL; + *fct_flow <<= 8UL; + *fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512)) + & 0x7FUL; + debug("EN "); + } else { + debug("DIS "); + } + debug("RX Flow "); + if (cap & FLOW_CTRL_RX) { + *flow |= FLOW_CR_RX_FCEN; + debug("EN"); + } else { + debug("DIS"); + } + } + debug("\n"); + return 0; +} + +int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev) +{ + int ret; + + memset(enetaddr, 0, 6); + + ret = lan7x_read_eeprom(udev, 0, 1, enetaddr); + + if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) { + ret = lan7x_read_eeprom(udev, + EEPROM_MAC_OFFSET, ETH_ALEN, + enetaddr); + if ((ret == 0) && is_valid_ethaddr(enetaddr)) { + /* eeprom values are valid so use them */ + debug("MAC address read from EEPROM %pM\n", + enetaddr); + return 0; + } + } + debug("MAC address read from EEPROM invalid %pM\n", enetaddr); + + memset(enetaddr, 0, 6); + return -EINVAL; +} + +int lan7x_pmt_phy_reset(struct usb_device *udev, + struct ueth_data *dev) +{ + int ret; + u32 data; + + ret = lan7x_read_reg(udev, PMT_CTL, &data); + if (ret) + return ret; + ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST); + if (ret) + return ret; + + /* for LAN7x, we need to check PMT_CTL_READY asserted */ + ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST", + PMT_CTL, PMT_CTL_PHY_RST, + false, 1000, 0); /* could take over 125mS */ + if (ret) + return ret; + + return lan7x_wait_for_bit(udev, "PMT_CTL_READY", + PMT_CTL, PMT_CTL_READY, + true, 1000, 0); +} + +int lan7x_basic_reset(struct usb_device *udev, + struct ueth_data *dev) +{ + int ret; + + dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */ + + ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST); + if (ret) + return ret; + + ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST", + HW_CFG, HW_CFG_LRST, + false, 1000, 0); + if (ret) + return ret; + + debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr); + + return lan7x_pmt_phy_reset(udev, dev); +} + +void lan7x_eth_stop(struct udevice *dev) +{ + debug("** %s()\n", __func__); +} + +int lan7x_eth_send(struct udevice *dev, void *packet, int length) +{ + struct lan7x_private *priv = dev_get_priv(dev); + struct ueth_data *ueth = &priv->ueth; + int err; + int actual_len; + u32 tx_cmd_a; + u32 tx_cmd_b; + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, + PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)); + + debug("** %s(), len %d, buf %#x\n", __func__, length, + (unsigned int)(ulong) msg); + if (length > PKTSIZE) + return -ENOSPC; + + /* LAN7x disable all TX offload features for u-boot */ + tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS; + tx_cmd_b = 0; + cpu_to_le32s(&tx_cmd_a); + cpu_to_le32s(&tx_cmd_b); + + /* prepend cmd_a and cmd_b */ + memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a)); + memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b)); + memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet, + length); + err = usb_bulk_msg(ueth->pusb_dev, + usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out), + (void *)msg, + length + sizeof(tx_cmd_a) + + sizeof(tx_cmd_b), + &actual_len, USB_BULK_SEND_TIMEOUT_MS); + debug("Tx: len = %u, actual = %u, err = %d\n", + (unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)), + (unsigned int)actual_len, err); + + return err; +} + +int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct lan7x_private *priv = dev_get_priv(dev); + struct ueth_data *ueth = &priv->ueth; + uint8_t *ptr; + int ret, len; + u32 packet_len = 0; + u32 rx_cmd_a = 0; + + len = usb_ether_get_rx_bytes(ueth, &ptr); + debug("%s: first try, len=%d\n", __func__, len); + if (!len) { + if (!(flags & ETH_RECV_CHECK_DEVICE)) + return -EAGAIN; + ret = usb_ether_receive(ueth, RX_URB_SIZE); + if (ret == -EAGAIN) + return ret; + + len = usb_ether_get_rx_bytes(ueth, &ptr); + debug("%s: second try, len=%d\n", __func__, len); + } + + /* + * 1st 4 bytes contain the length of the actual data plus error info. + * Extract data length. + */ + if (len < sizeof(packet_len)) { + debug("Rx: incomplete packet length\n"); + goto err; + } + memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a)); + le32_to_cpus(&rx_cmd_a); + if (rx_cmd_a & RX_CMD_A_RXE) { + debug("Rx: Error header=%#x", rx_cmd_a); + goto err; + } + packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK); + + if (packet_len > len - sizeof(packet_len)) { + debug("Rx: too large packet: %d\n", packet_len); + goto err; + } + + /* + * For LAN7x, the length in command A does not + * include command A, B, and C length. + * So use it as is. + */ + + *packetp = ptr + 10; + return packet_len; + +err: + usb_ether_advance_rxbuf(ueth, -1); + return -EINVAL; +} + +int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len) +{ + struct lan7x_private *priv = dev_get_priv(dev); + + packet_len = ALIGN(packet_len, 4); + usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len); + + return 0; +} + +int lan7x_eth_remove(struct udevice *dev) +{ + struct lan7x_private *priv = dev_get_priv(dev); + + debug("** %s()\n", __func__); + free(priv->phydev); + mdio_unregister(priv->mdiobus); + mdio_free(priv->mdiobus); + + return 0; +} diff --git a/drivers/usb/eth/lan7x.h b/drivers/usb/eth/lan7x.h new file mode 100644 index 0000000000..4f4b3f85e2 --- /dev/null +++ b/drivers/usb/eth/lan7x.h @@ -0,0 +1,230 @@ +/* + * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <console.h> +#include <watchdog.h> + +/* USB Vendor Requests */ +#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 +#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 +#define USB_VENDOR_REQUEST_GET_STATS 0xA2 + +/* Tx Command A */ +#define TX_CMD_A_FCS BIT(22) +#define TX_CMD_A_LEN_MASK 0x000FFFFF + +/* Rx Command A */ +#define RX_CMD_A_RXE BIT(18) +#define RX_CMD_A_LEN_MASK 0x00003FFF + +/* SCSRs */ +#define ID_REV 0x00 +#define ID_REV_CHIP_ID_MASK 0xFFFF0000 +#define ID_REV_CHIP_ID_7500 0x7500 +#define ID_REV_CHIP_ID_7800 0x7800 +#define ID_REV_CHIP_ID_7850 0x7850 + +#define INT_STS 0x0C + +#define HW_CFG 0x010 +#define HW_CFG_LRST BIT(1) + +#define PMT_CTL 0x014 +#define PMT_CTL_PHY_PWRUP BIT(10) +#define PMT_CTL_READY BIT(7) +#define PMT_CTL_PHY_RST BIT(4) + +#define E2P_CMD 0x040 +#define E2P_CMD_EPC_BUSY BIT(31) +#define E2P_CMD_EPC_CMD_READ 0x00000000 +#define E2P_CMD_EPC_TIMEOUT BIT(10) +#define E2P_CMD_EPC_ADDR_MASK 0x000001FF + +#define E2P_DATA 0x044 + +#define RFE_CTL_BCAST_EN BIT(10) +#define RFE_CTL_DA_PERFECT BIT(1) + +#define FCT_RX_CTL_EN BIT(31) + +#define FCT_TX_CTL_EN BIT(31) + +#define MAC_CR 0x100 +#define MAC_CR_ADP BIT(13) +#define MAC_CR_AUTO_DUPLEX BIT(12) +#define MAC_CR_AUTO_SPEED BIT(11) + +#define MAC_RX 0x104 +#define MAC_RX_FCS_STRIP BIT(4) +#define MAC_RX_RXEN BIT(0) + +#define MAC_TX 0x108 +#define MAC_TX_TXEN BIT(0) + +#define FLOW 0x10C +#define FLOW_CR_TX_FCEN BIT(30) +#define FLOW_CR_RX_FCEN BIT(29) + +#define RX_ADDRH 0x118 +#define RX_ADDRL 0x11C + +#define MII_ACC 0x120 +#define MII_ACC_MII_READ 0x00000000 +#define MII_ACC_MII_WRITE 0x00000002 +#define MII_ACC_MII_BUSY BIT(0) + +#define MII_DATA 0x124 + +#define SS_USB_PKT_SIZE 1024 +#define HS_USB_PKT_SIZE 512 +#define FS_USB_PKT_SIZE 64 + +#define MAX_RX_FIFO_SIZE (12 * 1024) +#define MAX_TX_FIFO_SIZE (12 * 1024) +#define DEFAULT_BULK_IN_DELAY 0x0800 + +#define EEPROM_INDICATOR 0xA5 +#define EEPROM_MAC_OFFSET 0x01 + +/* Some extra defines */ +#define LAN7X_INTERNAL_PHY_ID 1 + +#define LAN7X_MAC_RX_MAX_SIZE(mtu) \ + ((mtu) << 16) /* Max frame size */ +#define LAN7X_MAC_RX_MAX_SIZE_DEFAULT \ + LAN7X_MAC_RX_MAX_SIZE(ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */) + +/* Timeouts */ +#define USB_CTRL_SET_TIMEOUT_MS 5000 +#define USB_CTRL_GET_TIMEOUT_MS 5000 +#define USB_BULK_SEND_TIMEOUT_MS 5000 +#define USB_BULK_RECV_TIMEOUT_MS 5000 +#define TIMEOUT_RESOLUTION_MS 50 +#define PHY_CONNECT_TIMEOUT_MS 5000 + +#define RX_URB_SIZE 2048 + +/* driver private */ +struct lan7x_private { + struct ueth_data ueth; + u32 chipid; /* Chip or device ID */ + struct mii_dev *mdiobus; + struct phy_device *phydev; +}; + +/* + * Lan7x infrastructure commands + */ + +int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data); + +int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data); + +static inline int lan7x_wait_for_bit(struct usb_device *udev, + const char *prefix, const u32 reg, + const u32 mask, const bool set, + const unsigned int timeout_ms, + const bool breakable) +{ + u32 val; + unsigned long start = get_timer(0); + + while (1) { + lan7x_read_reg(udev, reg, &val); + + if (!set) + val = ~val; + + if ((val & mask) == mask) + return 0; + + if (get_timer(start) > timeout_ms) + break; + + if (breakable && ctrlc()) { + puts("Abort\n"); + return -EINTR; + } + + udelay(1); + WATCHDOG_RESET(); + } + + debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg, + mask, set); + + return -ETIMEDOUT; +} + +int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx); + +void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, + int regval); + +static inline int lan7x_mdio_wait_for_bit(struct usb_device *udev, + const char *prefix, + int phy_id, const u32 reg, + const u32 mask, const bool set, + const unsigned int timeout_ms, + const bool breakable) +{ + u32 val; + unsigned long start = get_timer(0); + + while (1) { + val = lan7x_mdio_read(udev, phy_id, reg); + + if (!set) + val = ~val; + + if ((val & mask) == mask) + return 0; + + if (get_timer(start) > timeout_ms) + break; + + if (breakable && ctrlc()) { + puts("Abort\n"); + return -EINTR; + } + + udelay(1); + WATCHDOG_RESET(); + } + + debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg, + mask, set); + + return -ETIMEDOUT; +} + +int lan7x_phylib_register(struct udevice *udev); + +int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev); + +int lan7x_eth_phylib_config_start(struct udevice *udev); + +int lan7x_pmt_phy_reset(struct usb_device *udev, + struct ueth_data *dev); + +int lan7x_update_flowcontrol(struct usb_device *udev, + struct ueth_data *dev, + uint32_t *flow, uint32_t *fct_flow); + +int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev); + +int lan7x_basic_reset(struct usb_device *udev, + struct ueth_data *dev); + +void lan7x_eth_stop(struct udevice *dev); + +int lan7x_eth_send(struct udevice *dev, void *packet, int length); + +int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp); + +int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len); + +int lan7x_eth_remove(struct udevice *dev); diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c index 0db7a3b6c1..a25f5019e8 100644 --- a/drivers/usb/gadget/designware_udc.c +++ b/drivers/usb/gadget/designware_udc.c @@ -601,7 +601,7 @@ void udc_setup_ep(struct usb_device_instance *device, if ((ep != 0) && (udc_device->device_state < STATE_ADDRESSED)) return; - tt = getenv("usbtty"); + tt = env_get("usbtty"); if (!tt) tt = "generic"; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 4137d76c42..2cf5c8d31e 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -2384,12 +2384,12 @@ static int _usb_eth_init(struct ether_priv *priv) strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr)); #endif /* Check if the user overruled the MAC addresses */ - if (getenv("usbnet_devaddr")) - strlcpy(dev_addr, getenv("usbnet_devaddr"), + if (env_get("usbnet_devaddr")) + strlcpy(dev_addr, env_get("usbnet_devaddr"), sizeof(dev_addr)); - if (getenv("usbnet_hostaddr")) - strlcpy(host_addr, getenv("usbnet_hostaddr"), + if (env_get("usbnet_hostaddr")) + strlcpy(host_addr, env_get("usbnet_hostaddr"), sizeof(host_addr)); if (!is_eth_addr_valid(dev_addr)) { @@ -2420,8 +2420,8 @@ static int _usb_eth_init(struct ether_priv *priv) gadget = dev->gadget; usb_gadget_connect(gadget); - if (getenv("cdc_connect_timeout")) - timeout = simple_strtoul(getenv("cdc_connect_timeout"), + if (env_get("cdc_connect_timeout")) + timeout = simple_strtoul(env_get("cdc_connect_timeout"), NULL, 10) * CONFIG_SYS_HZ; ts = get_timer(0); while (!dev->network_started) { @@ -2685,7 +2685,7 @@ static int usb_eth_probe(struct udevice *dev) l_priv = priv; get_ether_addr(CONFIG_USBNET_DEVADDR, pdata->enetaddr); - eth_setenv_enetaddr("usbnet_devaddr", pdata->enetaddr); + eth_env_set_enetaddr("usbnet_devaddr", pdata->enetaddr); return 0; } diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index dfa4359577..bc4be712da 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -725,7 +725,7 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f) cdev->req->context = f_dfu; - s = getenv("serial#"); + s = env_get("serial#"); if (s) g_dnl_set_serialnumber((char *)s); diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7cd6d24bf5..d05b74b2d2 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -212,7 +212,7 @@ static int fastboot_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors = fb_hs_function; } - s = getenv("serial#"); + s = env_get("serial#"); if (s) g_dnl_set_serialnumber((char *)s); @@ -426,7 +426,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE); strncat(response, str_num, chars_left); } else if (!strcmp_l1("serialno", cmd)) { - s = getenv("serial#"); + s = env_get("serial#"); if (s) strncat(response, s, chars_left); else @@ -441,7 +441,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) } sprintf(envstr, "fastboot.%s", cmd); - s = getenv(envstr); + s = env_get(envstr); if (s) { strncat(response, s, chars_left); } else { diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b57c6cd35a..62c431b99f 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -225,7 +225,7 @@ static int ehci_fsl_init(int index, struct usb_ehci *ehci, "phy_type", &len); #endif else - phy_type = getenv("usb_phy_type"); + phy_type = env_get("usb_phy_type"); if (!phy_type) { #ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY diff --git a/drivers/video/ati_radeon_fb.c b/drivers/video/ati_radeon_fb.c index 07a29eaba1..5b6c42291c 100644 --- a/drivers/video/ati_radeon_fb.c +++ b/drivers/video/ati_radeon_fb.c @@ -637,7 +637,8 @@ void *video_hw_init(void) videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE; /* get video mode via environment */ - if ((penv = getenv ("videomode")) != NULL) { + penv = env_get("videomode"); + if (penv) { /* deceide if it is a string */ if (penv[0] <= '9') { videomode = (int) simple_strtoul (penv, NULL, 16); diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index b6fc7e145b..6c5425c195 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1856,7 +1856,7 @@ static void *video_logo(void) splash_get_pos(&video_logo_xpos, &video_logo_ypos); #ifdef CONFIG_SPLASH_SCREEN - s = getenv("splashimage"); + s = env_get("splashimage"); if (s != NULL) { ret = splash_screen_prepare(); if (ret < 0) diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c index 1c74e97c5e..e0565e1d2e 100644 --- a/drivers/video/mb862xx.c +++ b/drivers/video/mb862xx.c @@ -246,7 +246,8 @@ unsigned int card_init (void) tmp = 0; videomode = 0x310; /* get video mode via environment */ - if ((penv = getenv ("videomode")) != NULL) { + penv = env_get("videomode"); + if (penv) { /* decide if it is a string */ if (penv[0] <= '9') { videomode = (int) simple_strtoul (penv, NULL, 16); diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 51d06d6677..78e595ea4a 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -816,7 +816,7 @@ void *video_hw_init(void) videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE; /* get video mode via environment */ - penv = getenv("videomode"); + penv = env_get("videomode"); if (penv) { /* decide if it is a string */ if (penv[0] <= '9') { diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 0ddce3db58..9d810bab31 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -161,7 +161,7 @@ void *video_hw_init(void) puts("Video: "); /* Suck display configuration from "videomode" variable */ - penv = getenv("videomode"); + penv = env_get("videomode"); if (!penv) { puts("MXSFB: 'videomode' variable not set!\n"); return NULL; diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c index cf71ad120e..6d96b33f20 100644 --- a/drivers/video/videomodes.c +++ b/drivers/video/videomodes.c @@ -165,7 +165,8 @@ int video_get_params (struct ctfb_res_modes *pPar, char *penv) /* first search for the environment containing the real param string */ s = penv; - if ((p = getenv (s)) != NULL) + p = env_get(s); + if (p) s = p; /* @@ -234,7 +235,7 @@ int video_get_params (struct ctfb_res_modes *pPar, char *penv) int video_get_video_mode(unsigned int *xres, unsigned int *yres, unsigned int *depth, unsigned int *freq, const char **options) { - char *p = getenv("video-mode"); + char *p = env_get("video-mode"); if (!p) return 0; diff --git a/drivers/watchdog/wdt-uclass.c b/drivers/watchdog/wdt-uclass.c index bb9ae80866..8a30f024fd 100644 --- a/drivers/watchdog/wdt-uclass.c +++ b/drivers/watchdog/wdt-uclass.c @@ -13,14 +13,14 @@ DECLARE_GLOBAL_DATA_PTR; -int wdt_start(struct udevice *dev, u64 timeout, ulong flags) +int wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) { const struct wdt_ops *ops = device_get_ops(dev); if (!ops->start) return -ENOSYS; - return ops->start(dev, timeout, flags); + return ops->start(dev, timeout_ms, flags); } int wdt_stop(struct udevice *dev) diff --git a/dts/Kconfig b/dts/Kconfig index 1bc9656fae..b4b7ddc144 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -32,6 +32,14 @@ config SPL_OF_CONTROL which is not enough to support device tree. Enable this option to allow such boards to be supported by U-Boot SPL. +config TPL_OF_CONTROL + bool "Enable run-time configuration via Device Tree in TPL" + depends on TPL && OF_CONTROL + help + Some boards use device tree in U-Boot but only have 4KB of SRAM + which is not enough to support device tree. Enable this option to + allow such boards to be supported by U-Boot TPL. + config OF_LIVE bool "Enable use of a live tree" depends on OF_CONTROL @@ -136,4 +144,25 @@ config SPL_OF_PLATDATA declarations for each node. See README.platdata for more information. +config TPL_OF_PLATDATA + bool "Generate platform data for use in TPL" + depends on TPL_OF_CONTROL + help + For very constrained SPL environments the overhead of decoding + device tree nodes and converting their contents into platform data + is too large. This overhead includes libfdt code as well as the + device tree contents itself. The latter is fairly compact, but the + former can add 3KB or more to a Thumb 2 Image. + + This option enables generation of platform data from the device + tree as C code. This code creates devices using U_BOOT_DEVICE() + declarations. The benefit is that it allows driver code to access + the platform data directly in C structures, avoidin the libfdt + overhead. + + This option works by generating C structure declarations for each + compatible string, then adding platform data and U_BOOT_DEVICE + declarations for each node. See README.platdata for more + information. + endmenu diff --git a/env/Kconfig b/env/Kconfig new file mode 100644 index 0000000000..748f534d11 --- /dev/null +++ b/env/Kconfig @@ -0,0 +1,475 @@ +menu "Environment" + +choice + prompt "Select the location of the environment" + default ENV_IS_IN_MMC if ARCH_SUNXI + default ENV_IS_IN_FAT if ARCH_BCM283X + default ENV_IS_IN_MMC if ARCH_UNIPHIER + default ENV_IS_IN_MMC if ARCH_EXYNOS4 + default ENV_IS_IN_MMC if MX6SX || MX7D + default ENV_IS_IN_FLASH if ARCH_CINTEGRATOR + default ENV_IS_IN_SPI_FLASH if ARMADA_XP + default ENV_IS_IN_MMC if TEGRA30 || TEGRA124 + default ENV_IS_IN_MMC if TEGRA_ARMV8_COMMON + default ENV_IS_IN_FLASH if ARCH_INTEGRATOR_CP + default ENV_IS_IN_FLASH if M548x || M547x || M5282 || MCF547x_8x + default ENV_IS_IN_FLASH if MCF532x || MCF52x2 + default ENV_IS_IN_FLASH if MPC86xx || MPC83xx + default ENV_IS_IN_FLASH if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641 + default ENV_IS_IN_FLASH if SH && !CPU_SH4 + default ENV_IS_IN_SPI_FLASH if INTEL_BAYTRAIL + default ENV_IS_IN_SPI_FLASH if INTEL_BROADWELL + default ENV_IS_IN_SPI_FLASH if NORTHBRIDGE_INTEL_IVYBRIDGE + default ENV_IS_IN_SPI_FLASH if INTEL_QUARK + default ENV_IS_IN_SPI_FLASH if INTEL_QUEENSBAY + default ENV_IS_IN_FAT if MMC_OMAP_HS && TI_COMMON_CMD_OPTIONS + default ENV_IS_NOWHERE + help + At present the environment can be stored in only one place. Use this + option to select the location. This is either a device (where the + environemnt information is simply written to a fixed location or + partition on the device) or a filesystem (where the environment + information is written to a file). + +config ENV_IS_NOWHERE + bool "Environment is not stored" + help + Define this if you don't want to or can't have an environment stored + on a storage medium. In this case the environemnt will still exist + while U-Boot is running, but once U-Boot exits it will not be + stored. U-Boot will therefore always start up with a default + environment. + +config ENV_IS_IN_DATAFLASH + bool "Environment in dataflash" + depends on !CHAIN_OF_TRUST + help + Define this if you have a DataFlash memory device which you + want to use for the environment. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These three #defines specify the offset and size of the + environment area within the total memory of your DataFlash placed + at the specified address. + +config ENV_IS_IN_EEPROM + bool "Environment in EEPROM" + depends on !CHAIN_OF_TRUST + help + Use this if you have an EEPROM or similar serial access + device and a driver for it. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the + environment area within the total memory of your EEPROM. + + - CONFIG_SYS_I2C_EEPROM_ADDR: + If defined, specified the chip address of the EEPROM device. + The default address is zero. + + - CONFIG_SYS_I2C_EEPROM_BUS: + If defined, specified the i2c bus of the EEPROM device. + + - CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: + If defined, the number of bits used to address bytes in a + single page in the EEPROM device. A 64 byte page, for example + would require six bits. + + - CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: + If defined, the number of milliseconds to delay between + page writes. The default is zero milliseconds. + + - CONFIG_SYS_I2C_EEPROM_ADDR_LEN: + The length in bytes of the EEPROM memory array address. Note + that this is NOT the chip address length! + + - CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: + EEPROM chips that implement "address overflow" are ones + like Catalyst 24WC04/08/16 which has 9/10/11 bits of + address and the extra bits end up in the "chip address" bit + slots. This makes a 24WC08 (1Kbyte) chip look like four 256 + byte chips. + + Note that we consider the length of the address field to + still be one byte because the extra address bits are hidden + in the chip address. + + - CONFIG_SYS_EEPROM_SIZE: + The size in bytes of the EEPROM device. + + - CONFIG_ENV_EEPROM_IS_ON_I2C + define this, if you have I2C and SPI activated, and your + EEPROM, which holds the environment, is on the I2C bus. + + - CONFIG_I2C_ENV_EEPROM_BUS + if you have an Environment on an EEPROM reached over + I2C muxes, you can define here, how to reach this + EEPROM. For example: + + #define CONFIG_I2C_ENV_EEPROM_BUS 1 + + EEPROM which holds the environment, is reached over + a pca9547 i2c mux with address 0x70, channel 3. + +config ENV_IS_IN_FAT + bool "Environment is in a FAT filesystem" + depends on !CHAIN_OF_TRUST + select FAT_WRITE + help + Define this if you want to use the FAT file system for the environment. + + - CONFIG_FAT_WRITE: + This must be enabled. Otherwise it cannot save the environment file. + +config ENV_IS_IN_FLASH + bool "Environment in flash memory" + depends on !CHAIN_OF_TRUST + help + Define this if you have a flash device which you want to use for the + environment. + + a) The environment occupies one whole flash sector, which is + "embedded" in the text segment with the U-Boot code. This + happens usually with "bottom boot sector" or "top boot + sector" type flash chips, which have several smaller + sectors at the start or the end. For instance, such a + layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In + such a case you would place the environment in one of the + 4 kB sectors - with U-Boot code before and after it. With + "top boot sector" type flash chips, you would put the + environment in one of the last sectors, leaving a gap + between U-Boot and the environment. + + CONFIG_ENV_OFFSET: + + Offset of environment data (variable area) to the + beginning of flash memory; for instance, with bottom boot + type flash chips the second sector can be used: the offset + for this sector is given here. + + CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. + + CONFIG_ENV_ADDR: + + This is just another way to specify the start address of + the flash sector containing the environment (instead of + CONFIG_ENV_OFFSET). + + CONFIG_ENV_SECT_SIZE: + + Size of the sector containing the environment. + + + b) Sometimes flash chips have few, equal sized, BIG sectors. + In such a case you don't want to spend a whole sector for + the environment. + + CONFIG_ENV_SIZE: + + If you use this in combination with CONFIG_ENV_IS_IN_FLASH + and CONFIG_ENV_SECT_SIZE, you can specify to use only a part + of this flash sector for the environment. This saves + memory for the RAM copy of the environment. + + It may also save flash memory if you decide to use this + when your environment is "embedded" within U-Boot code, + since then the remainder of the flash sector could be used + for U-Boot code. It should be pointed out that this is + STRONGLY DISCOURAGED from a robustness point of view: + updating the environment in flash makes it always + necessary to erase the WHOLE sector. If something goes + wrong before the contents has been restored from a copy in + RAM, your target system will be dead. + + CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND + + These settings describe a second storage area used to hold + a redundant copy of the environment data, so that there is + a valid backup copy in case there is a power failure during + a "saveenv" operation. + + BE CAREFUL! Any changes to the flash layout, and some changes to the + source code will make it necessary to adapt <board>/u-boot.lds* + accordingly! + +config ENV_IS_IN_MMC + bool "Environment in an MMC device" + depends on !CHAIN_OF_TRUST + help + Define this if you have an MMC device which you want to use for the + environment. + + CONFIG_SYS_MMC_ENV_DEV: + + Specifies which MMC device the environment is stored in. + + CONFIG_SYS_MMC_ENV_PART (optional): + + Specifies which MMC partition the environment is stored in. If not + set, defaults to partition 0, the user area. Common values might be + 1 (first MMC boot partition), 2 (second MMC boot partition). + + CONFIG_ENV_OFFSET: + CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the environment + area within the specified MMC device. + + If offset is positive (the usual case), it is treated as relative to + the start of the MMC partition. If offset is negative, it is treated + as relative to the end of the MMC partition. This can be useful if + your board may be fitted with different MMC devices, which have + different sizes for the MMC partitions, and you always want the + environment placed at the very end of the partition, to leave the + maximum possible space before it, to store other data. + + These two values are in units of bytes, but must be aligned to an + MMC sector boundary. + + CONFIG_ENV_OFFSET_REDUND (optional): + + Specifies a second storage area, of CONFIG_ENV_SIZE size, used to + hold a redundant copy of the environment data. This provides a + valid backup copy in case the other copy is corrupted, e.g. due + to a power failure during a "saveenv" operation. + + This value may also be positive or negative; this is handled in the + same way as CONFIG_ENV_OFFSET. + + This value is also in units of bytes, but must also be aligned to + an MMC sector boundary. + + CONFIG_ENV_SIZE_REDUND (optional): + + This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is + set. If this value is set, it must be set to the same value as + CONFIG_ENV_SIZE. + +config ENV_IS_IN_NAND + bool "Environment in a NAND device" + depends on !CHAIN_OF_TRUST + help + Define this if you have a NAND device which you want to use for the + environment. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the environment + area within the first NAND device. CONFIG_ENV_OFFSET must be + aligned to an erase block boundary. + + - CONFIG_ENV_OFFSET_REDUND (optional): + + This setting describes a second storage area of CONFIG_ENV_SIZE + size used to hold a redundant copy of the environment data, so + that there is a valid backup copy in case there is a power failure + during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be + aligned to an erase block boundary. + + - CONFIG_ENV_RANGE (optional): + + Specifies the length of the region in which the environment + can be written. This should be a multiple of the NAND device's + block size. Specifying a range with more erase blocks than + are needed to hold CONFIG_ENV_SIZE allows bad blocks within + the range to be avoided. + + - CONFIG_ENV_OFFSET_OOB (optional): + + Enables support for dynamically retrieving the offset of the + environment from block zero's out-of-band data. The + "nand env.oob" command can be used to record this offset. + Currently, CONFIG_ENV_OFFSET_REDUND is not supported when + using CONFIG_ENV_OFFSET_OOB. + +config ENV_IS_IN_NVRAM + bool "Environment in a non-volatile RAM" + depends on !CHAIN_OF_TRUST + help + Define this if you have some non-volatile memory device + (NVRAM, battery buffered SRAM) which you want to use for the + environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines are used to determine the memory area you + want to use for environment. It is assumed that this memory + can just be read and written to, without any special + provision. + +config ENV_IS_IN_ONENAND + bool "Environment is in OneNAND" + depends on !CHAIN_OF_TRUST + help + Define this if you want to put your local device's environment in + OneNAND. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines are used to determine the device range you + want to use for environment. It is assumed that this memory + can just be read and written to, without any special + provision. + +config ENV_IS_IN_REMOTE + bool "Environment is in remove memory space" + depends on !CHAIN_OF_TRUST + help + Define this if you have a remote memory space which you + want to use for the local device's environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines specify the address and size of the + environment area within the remote memory space. The + local device can get the environment from remote memory + space by SRIO or PCIE links. + +config ENV_IS_IN_SPI_FLASH + bool "Environment is in SPI flash" + depends on !CHAIN_OF_TRUST + help + Define this if you have a SPI Flash memory device which you + want to use for the environment. + + - CONFIG_ENV_OFFSET: + - CONFIG_ENV_SIZE: + + These two #defines specify the offset and size of the + environment area within the SPI Flash. CONFIG_ENV_OFFSET must be + aligned to an erase sector boundary. + + - CONFIG_ENV_SECT_SIZE: + + Define the SPI flash's sector size. + + - CONFIG_ENV_OFFSET_REDUND (optional): + + This setting describes a second storage area of CONFIG_ENV_SIZE + size used to hold a redundant copy of the environment data, so + that there is a valid backup copy in case there is a power failure + during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be + aligned to an erase sector boundary. + + - CONFIG_ENV_SPI_BUS (optional): + - CONFIG_ENV_SPI_CS (optional): + + Define the SPI bus and chip select. If not defined they will be 0. + + - CONFIG_ENV_SPI_MAX_HZ (optional): + + Define the SPI max work clock. If not defined then use 1MHz. + + - CONFIG_ENV_SPI_MODE (optional): + + Define the SPI work mode. If not defined then use SPI_MODE_3. + +config ENV_IS_IN_UBI + bool "Environment in a UBI volume" + depends on !CHAIN_OF_TRUST + help + Define this if you have an UBI volume that you want to use for the + environment. This has the benefit of wear-leveling the environment + accesses, which is important on NAND. + + - CONFIG_ENV_UBI_PART: + + Define this to a string that is the mtd partition containing the UBI. + + - CONFIG_ENV_UBI_VOLUME: + + Define this to the name of the volume that you want to store the + environment in. + + - CONFIG_ENV_UBI_VOLUME_REDUND: + + Define this to the name of another volume to store a second copy of + the environment in. This will enable redundant environments in UBI. + It is assumed that both volumes are in the same MTD partition. + + - CONFIG_UBI_SILENCE_MSG + - CONFIG_UBIFS_SILENCE_MSG + + You will probably want to define these to avoid a really noisy system + when storing the env in UBI. + +endchoice + +config ENV_FAT_INTERFACE + string "Name of the block device for the environment" + depends on ENV_IS_IN_FAT + default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91 + help + Define this to a string that is the name of the block device. + +config ENV_FAT_DEVICE_AND_PART + string "Device and partition for where to store the environemt in FAT" + depends on ENV_IS_IN_FAT + default "0:1" if TI_COMMON_CMD_OPTIONS + default "0:auto" if ARCH_ZYNQMP + default "0" if ARCH_AT91 + help + Define this to a string to specify the partition of the device. It can + be as following: + + "D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1) + - "D:P": device D partition P. Error occurs if device D has no + partition table. + - "D:0": device D. + - "D" or "D:": device D partition 1 if device D has partition + table, or the whole device D if has no partition + table. + - "D:auto": first partition in device D with bootable flag set. + If none, first valid partition in device D. If no + partition table then means device D. + +config ENV_FAT_FILE + string "Name of the FAT file to use for the environemnt" + depends on ENV_IS_IN_FAT + default "uboot.env" + help + It's a string of the FAT file name. This file use to store the + environment. + +if ARCH_SUNXI + +config ENV_OFFSET + hex "Environment Offset" + depends on !ENV_IS_IN_UBI + depends on !ENV_IS_NOWHERE + default 0x88000 if ARCH_SUNXI + help + Offset from the start of the device (or partition) + +config ENV_SIZE + hex "Environment Size" + depends on !ENV_IS_NOWHERE + default 0x20000 if ARCH_SUNXI + help + Size of the environment storage area + +config ENV_UBI_PART + string "UBI partition name" + depends on ENV_IS_IN_UBI + help + MTD partition containing the UBI device + +config ENV_UBI_VOLUME + string "UBI volume name" + depends on ENV_IS_IN_UBI + help + Name of the volume that you want to store the environment in. + +endif + +endmenu diff --git a/env/Makefile b/env/Makefile new file mode 100644 index 0000000000..8df5b9d4c9 --- /dev/null +++ b/env/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2004-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += common.o env.o + +ifndef CONFIG_SPL_BUILD +obj-y += attr.o +obj-y += callback.o +obj-y += flags.o +obj-$(CONFIG_ENV_IS_IN_DATAFLASH) += dataflash.o +obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o +extra-$(CONFIG_ENV_IS_EMBEDDED) += embedded.o +obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o +extra-$(CONFIG_ENV_IS_IN_FLASH) += embedded.o +obj-$(CONFIG_ENV_IS_IN_NVRAM) += embedded.o +obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o +obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o +obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o +obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o +obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o +obj-$(CONFIG_ENV_IS_IN_NVRAM) += nvram.o +obj-$(CONFIG_ENV_IS_IN_ONENAND) += onenand.o +obj-$(CONFIG_ENV_IS_IN_SATA) += sata.o +obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o +obj-$(CONFIG_ENV_IS_IN_REMOTE) += remote.o +obj-$(CONFIG_ENV_IS_IN_UBI) += ubi.o +obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o +endif + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o +# environment +ifdef CONFIG_TPL_BUILD +obj-$(CONFIG_TPL_ENV_SUPPORT) += attr.o +obj-$(CONFIG_TPL_ENV_SUPPORT) += flags.o +obj-$(CONFIG_TPL_ENV_SUPPORT) += callback.o +else +obj-$(CONFIG_SPL_ENV_SUPPORT) += attr.o +obj-$(CONFIG_SPL_ENV_SUPPORT) += flags.o +obj-$(CONFIG_SPL_ENV_SUPPORT) += callback.o +endif +ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),) +obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o +obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o +obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o +obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o +obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o +obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o +obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o +endif +endif + +CFLAGS_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/common/env_attr.c b/env/attr.c index f965b4bbb6..f965b4bbb6 100644 --- a/common/env_attr.c +++ b/env/attr.c diff --git a/common/env_callback.c b/env/callback.c index 1957cc1996..be70980f04 100644 --- a/common/env_callback.c +++ b/env/callback.c @@ -51,7 +51,7 @@ void env_callback_init(ENTRY *var_entry) int ret = 1; if (first_call) { - callback_list = getenv(ENV_CALLBACK_VAR); + callback_list = env_get(ENV_CALLBACK_VAR); first_call = 0; } diff --git a/common/env_common.c b/env/common.c index d9c0c4e3f3..688d5ab4c8 100644 --- a/common/env_common.c +++ b/env/common.c @@ -27,49 +27,13 @@ struct hsearch_data env_htab = { .change_ok = env_flags_validate, }; -__weak uchar env_get_char_spec(int index) -{ - return *((uchar *)(gd->env_addr + index)); -} - -static uchar env_get_char_init(int index) -{ - /* if crc was bad, use the default environment */ - if (gd->env_valid) - return env_get_char_spec(index); - else - return default_environment[index]; -} - -uchar env_get_char_memory(int index) -{ - return *env_get_addr(index); -} - -uchar env_get_char(int index) -{ - /* if relocated to RAM */ - if (gd->flags & GD_FLG_RELOC) - return env_get_char_memory(index); - else - return env_get_char_init(index); -} - -const uchar *env_get_addr(int index) -{ - if (gd->env_valid) - return (uchar *)(gd->env_addr + index); - else - return &default_environment[index]; -} - /* * Read an environment variable as a boolean * Return -1 if variable does not exist (default to true) */ -int getenv_yesno(const char *var) +int env_get_yesno(const char *var) { - char *s = getenv(var); + char *s = env_get(var); if (s == NULL) return -1; @@ -80,7 +44,7 @@ int getenv_yesno(const char *var) /* * Look up the variable from the default environment */ -char *getenv_default(const char *name) +char *env_get_default(const char *name) { char *ret_val; unsigned long really_valid = gd->env_valid; @@ -89,7 +53,7 @@ char *getenv_default(const char *name) /* Pretend that the image is bad. */ gd->flags &= ~GD_FLG_ENV_READY; gd->env_valid = 0; - ret_val = getenv(name); + ret_val = env_get(name); gd->env_valid = really_valid; gd->flags = real_gd_flags; return ret_val; @@ -316,7 +280,7 @@ void env_relocate(void) set_default_env("!bad CRC"); #endif } else { - env_relocate_spec(); + env_load(); } } diff --git a/common/env_dataflash.c b/env/dataflash.c index 034e323169..77bc595e0d 100644 --- a/common/env_dataflash.c +++ b/env/dataflash.c @@ -14,11 +14,7 @@ DECLARE_GLOBAL_DATA_PTR; -env_t *env_ptr; - -char *env_name_spec = "dataflash"; - -uchar env_get_char_spec(int index) +static int env_dataflash_get_char(int index) { uchar c; @@ -27,7 +23,7 @@ uchar env_get_char_spec(int index) return c; } -void env_relocate_spec(void) +static int env_dataflash_load(void) { ulong crc, new = 0; unsigned off; @@ -48,13 +44,15 @@ void env_relocate_spec(void) env_import(buf, 1); else set_default_env("!bad CRC"); + + return 0; } #ifdef CONFIG_ENV_OFFSET_REDUND #error No support for redundant environment on dataflash yet! #endif -int saveenv(void) +static int env_dataflash_save(void) { env_t env_new; int ret; @@ -68,17 +66,10 @@ int saveenv(void) CONFIG_ENV_SIZE); } -/* - * Initialize environment use - * - * We are still running from ROM, so data use is limited. - * Use a (moderately small) buffer on the stack - */ -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} +U_BOOT_ENV_LOCATION(dataflash) = { + .location = ENVL_DATAFLASH, + ENV_NAME("dataflash") + .get_char = env_dataflash_get_char, + .load = env_dataflash_load, + .save = env_save_ptr(env_dataflash_save), +}; diff --git a/common/env_eeprom.c b/env/eeprom.c index 5f63a6cd4a..08ef6307fc 100644 --- a/common/env_eeprom.c +++ b/env/eeprom.c @@ -21,10 +21,6 @@ DECLARE_GLOBAL_DATA_PTR; -env_t *env_ptr; - -char *env_name_spec = "EEPROM"; - static int eeprom_bus_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) { @@ -65,13 +61,13 @@ static int eeprom_bus_write(unsigned dev_addr, unsigned offset, return rcode; } -uchar env_get_char_spec(int index) +static int env_eeprom_get_char(int index) { uchar c; unsigned int off = CONFIG_ENV_OFFSET; #ifdef CONFIG_ENV_OFFSET_REDUND - if (gd->env_valid == 2) + if (gd->env_valid == ENV_REDUND) off = CONFIG_ENV_OFFSET_REDUND; #endif eeprom_bus_read(CONFIG_SYS_DEF_EEPROM_ADDR, @@ -80,7 +76,7 @@ uchar env_get_char_spec(int index) return c; } -void env_relocate_spec(void) +static int env_eeprom_load(void) { char buf_env[CONFIG_ENV_SIZE]; unsigned int off = CONFIG_ENV_OFFSET; @@ -128,21 +124,21 @@ void env_relocate_spec(void) gd->env_addr = 0; gd->env_valid = 0; } else if (crc_ok[0] && !crc_ok[1]) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (!crc_ok[0] && crc_ok[1]) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else { /* both ok - check serial */ if (flags[0] == ACTIVE_FLAG && flags[1] == OBSOLETE_FLAG) - gd->env_valid = 1; + gd->env_valid = ENV_VALID; else if (flags[0] == OBSOLETE_FLAG && flags[1] == ACTIVE_FLAG) - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; else if (flags[0] == 0xFF && flags[1] == 0) - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; else if (flags[1] == 0xFF && flags[0] == 0) - gd->env_valid = 1; + gd->env_valid = ENV_VALID; else /* flags are equal - almost impossible */ - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } #else /* CONFIG_ENV_OFFSET_REDUND */ @@ -170,7 +166,7 @@ void env_relocate_spec(void) } if (crc == new) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else { gd->env_valid = 0; } @@ -178,7 +174,7 @@ void env_relocate_spec(void) off = CONFIG_ENV_OFFSET; #ifdef CONFIG_ENV_OFFSET_REDUND - if (gd->env_valid == 2) + if (gd->env_valid == ENV_REDUND) off = CONFIG_ENV_OFFSET_REDUND; #endif @@ -186,9 +182,11 @@ void env_relocate_spec(void) off, (uchar *)buf_env, CONFIG_ENV_SIZE); env_import(buf_env, 1); + + return 0; } -int saveenv(void) +static int env_eeprom_save(void) { env_t env_new; int rc; @@ -198,14 +196,12 @@ int saveenv(void) char flag_obsolete = OBSOLETE_FLAG; #endif - BUG_ON(env_ptr != NULL); - rc = env_export(&env_new); if (rc) return rc; #ifdef CONFIG_ENV_OFFSET_REDUND - if (gd->env_valid == 1) { + if (gd->env_valid == ENV_VALID) { off = CONFIG_ENV_OFFSET_REDUND; off_red = CONFIG_ENV_OFFSET; } @@ -222,24 +218,19 @@ int saveenv(void) off_red + offsetof(env_t, flags), (uchar *)&flag_obsolete, 1); - if (gd->env_valid == 1) - gd->env_valid = 2; + if (gd->env_valid == ENV_VALID) + gd->env_valid = ENV_REDUND; else - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } #endif return rc; } -/* - * Initialize Environment use - * - * We are still running from ROM, so data use is limited. - * Use a (moderately small) buffer on the stack - */ -int env_init(void) -{ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - return 0; -} +U_BOOT_ENV_LOCATION(eeprom) = { + .location = ENVL_EEPROM, + ENV_NAME("EEPROM") + .get_char = env_eeprom_get_char, + .load = env_eeprom_load, + .save = env_save_ptr(env_eeprom_save), +}; diff --git a/common/env_embedded.c b/env/embedded.c index 43694db70f..43694db70f 100644 --- a/common/env_embedded.c +++ b/env/embedded.c diff --git a/env/env.c b/env/env.c new file mode 100644 index 0000000000..2b8b9611cf --- /dev/null +++ b/env/env.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2017 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <environment.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct env_driver *env_driver_lookup(enum env_location loc) +{ + struct env_driver *drv; + const int n_ents = ll_entry_count(struct env_driver, env_driver); + struct env_driver *entry; + + drv = ll_entry_start(struct env_driver, env_driver); + for (entry = drv; entry != drv + n_ents; entry++) { + if (loc == entry->location) + return entry; + } + + /* Not found */ + return NULL; +} + +static enum env_location env_get_default_location(void) +{ + if IS_ENABLED(CONFIG_ENV_IS_IN_DATAFLASH) + return ENVL_DATAFLASH; + else if IS_ENABLED(CONFIG_ENV_IS_IN_EEPROM) + return ENVL_EEPROM; + else if IS_ENABLED(CONFIG_ENV_IS_IN_FAT) + return ENVL_FAT; + else if IS_ENABLED(CONFIG_ENV_IS_IN_FLASH) + return ENVL_FLASH; + else if IS_ENABLED(CONFIG_ENV_IS_IN_MMC) + return ENVL_MMC; + else if IS_ENABLED(CONFIG_ENV_IS_IN_NAND) + return ENVL_NAND; + else if IS_ENABLED(CONFIG_ENV_IS_IN_NVRAM) + return ENVL_NVRAM; + else if IS_ENABLED(CONFIG_ENV_IS_IN_REMOTE) + return ENVL_REMOTE; + else if IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) + return ENVL_SPI_FLASH; + else if IS_ENABLED(CONFIG_ENV_IS_IN_UBI) + return ENVL_UBI; + else if IS_ENABLED(CONFIG_ENV_IS_NOWHERE) + return ENVL_NOWHERE; + else + return ENVL_UNKNOWN; +} + +struct env_driver *env_driver_lookup_default(void) +{ + enum env_location loc = env_get_default_location(); + struct env_driver *drv; + + drv = env_driver_lookup(loc); + if (!drv) { + debug("%s: No environment driver for location %d\n", __func__, + loc); + return NULL; + } + + return drv; +} + +int env_get_char(int index) +{ + struct env_driver *drv = env_driver_lookup_default(); + int ret; + + if (!gd->env_valid) + return default_environment[index]; + if (!drv) + return -ENODEV; + if (!drv->get_char) + return *(uchar *)(gd->env_addr + index); + ret = drv->get_char(index); + if (ret < 0) { + debug("%s: Environment failed to load (err=%d)\n", + __func__, ret); + } + + return ret; +} + +int env_load(void) +{ + struct env_driver *drv = env_driver_lookup_default(); + int ret = 0; + + if (!drv) + return -ENODEV; + if (!drv->load) + return 0; + drv->load(); /* TODO(sjg@chromium.org): Make this return an error */ + if (ret) { + debug("%s: Environment failed to load (err=%d)\n", __func__, + ret); + return ret; + } + + return 0; +} + +int env_save(void) +{ + struct env_driver *drv = env_driver_lookup_default(); + int ret; + + if (!drv) + return -ENODEV; + if (!drv->save) + return -ENOSYS; + ret = drv->save(); + if (ret) { + debug("%s: Environment failed to save (err=%d)\n", __func__, + ret); + return ret; + } + + return 0; +} + +int env_init(void) +{ + struct env_driver *drv = env_driver_lookup_default(); + int ret = -ENOENT; + + if (!drv) + return -ENODEV; + if (drv->init) + ret = drv->init(); + if (ret == -ENOENT) { + gd->env_addr = (ulong)&default_environment[0]; + gd->env_valid = 0; + + return 0; + } else if (ret) { + debug("%s: Environment failed to init (err=%d)\n", __func__, + ret); + return ret; + } + + return 0; +} diff --git a/common/env_ext4.c b/env/ext4.c index adefa7dc99..65202213d3 100644 --- a/common/env_ext4.c +++ b/env/ext4.c @@ -31,23 +31,10 @@ #include <ext4fs.h> #include <mmc.h> -char *env_name_spec = "EXT4"; - -env_t *env_ptr; - DECLARE_GLOBAL_DATA_PTR; -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} - #ifdef CONFIG_CMD_SAVEENV -int saveenv(void) +static int env_ext4_save(void) { env_t env_new; struct blk_desc *dev_desc = NULL; @@ -88,7 +75,7 @@ int saveenv(void) } #endif /* CONFIG_CMD_SAVEENV */ -void env_relocate_spec(void) +static int env_ext4_load(void) { ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); struct blk_desc *dev_desc = NULL; @@ -122,8 +109,17 @@ void env_relocate_spec(void) } env_import(buf, 1); - return; + return 0; err_env_relocate: set_default_env(NULL); + + return -EIO; } + +U_BOOT_ENV_LOCATION(ext4) = { + .location = ENVL_EXT4, + ENV_NAME("EXT4") + .load = env_ext4_load, + .save = env_save_ptr(env_ext4_save), +}; diff --git a/common/env_fat.c b/env/fat.c index b51c920cd4..ec49c39053 100644 --- a/common/env_fat.c +++ b/env/fat.c @@ -19,23 +19,22 @@ #include <fat.h> #include <mmc.h> -char *env_name_spec = "FAT"; - -env_t *env_ptr; +#ifdef CONFIG_SPL_BUILD +/* TODO(sjg@chromium.org): Figure out why this is needed */ +# if !defined(CONFIG_TARGET_AM335X_EVM) || defined(CONFIG_SPL_OS_BOOT) +# define LOADENV +# endif +#else +# define LOADENV +# if defined(CONFIG_CMD_SAVEENV) +# define CMD_SAVEENV +# endif +#endif DECLARE_GLOBAL_DATA_PTR; -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} - -#ifdef CONFIG_CMD_SAVEENV -int saveenv(void) +#ifdef CMD_SAVEENV +static int env_fat_save(void) { env_t env_new; struct blk_desc *dev_desc = NULL; @@ -72,9 +71,10 @@ int saveenv(void) puts("done\n"); return 0; } -#endif /* CONFIG_CMD_SAVEENV */ +#endif /* CMD_SAVEENV */ -void env_relocate_spec(void) +#ifdef LOADENV +static int env_fat_load(void) { ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); struct blk_desc *dev_desc = NULL; @@ -103,8 +103,22 @@ void env_relocate_spec(void) } env_import(buf, 1); - return; + return 0; err_env_relocate: set_default_env(NULL); + + return -EIO; } +#endif /* LOADENV */ + +U_BOOT_ENV_LOCATION(fat) = { + .location = ENVL_FAT, + ENV_NAME("FAT") +#ifdef LOADENV + .load = env_fat_load, +#endif +#ifdef CMD_SAVEENV + .save = env_save_ptr(env_fat_save), +#endif +}; diff --git a/common/env_flags.c b/env/flags.c index 3c50620cb3..4b0ddb6bb8 100644 --- a/common/env_flags.c +++ b/env/flags.c @@ -15,7 +15,7 @@ #include "fw_env.h" #include <env_attr.h> #include <env_flags.h> -#define getenv fw_getenv +#define env_get fw_getenv #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) #else #include <common.h> @@ -308,7 +308,7 @@ static inline int env_flags_lookup(const char *flags_list, const char *name, */ enum env_flags_vartype env_flags_get_type(const char *name) { - const char *flags_list = getenv(ENV_FLAGS_VAR); + const char *flags_list = env_get(ENV_FLAGS_VAR); char flags[ENV_FLAGS_ATTR_MAX_LEN + 1]; if (env_flags_lookup(flags_list, name, flags)) @@ -325,7 +325,7 @@ enum env_flags_vartype env_flags_get_type(const char *name) */ enum env_flags_varaccess env_flags_get_varaccess(const char *name) { - const char *flags_list = getenv(ENV_FLAGS_VAR); + const char *flags_list = env_get(ENV_FLAGS_VAR); char flags[ENV_FLAGS_ATTR_MAX_LEN + 1]; if (env_flags_lookup(flags_list, name, flags)) @@ -426,7 +426,7 @@ void env_flags_init(ENTRY *var_entry) int ret = 1; if (first_call) { - flags_list = getenv(ENV_FLAGS_VAR); + flags_list = env_get(ENV_FLAGS_VAR); first_call = 0; } /* look in the ".flags" and static for a reference to this variable */ @@ -541,7 +541,7 @@ int env_flags_validate(const ENTRY *item, const char *newval, enum env_op op, return 1; } else if (item->flags & ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR) { - const char *defval = getenv_default(name); + const char *defval = env_get_default(name); if (defval == NULL) defval = ""; diff --git a/common/env_flash.c b/env/flash.c index 004e8849a7..b60be57a8d 100644 --- a/common/env_flash.c +++ b/env/flash.c @@ -20,10 +20,12 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_FLASH) -#define CMD_SAVEENV -#elif defined(CONFIG_ENV_ADDR_REDUND) -#error CONFIG_ENV_ADDR_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_FLASH +#ifndef CONFIG_SPL_BUILD +# if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_FLASH) +# define CMD_SAVEENV +# elif defined(CONFIG_ENV_ADDR_REDUND) +# error CONFIG_ENV_ADDR_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_FLASH +# endif #endif #if defined(CONFIG_ENV_SIZE_REDUND) && \ @@ -31,34 +33,45 @@ DECLARE_GLOBAL_DATA_PTR; #error CONFIG_ENV_SIZE_REDUND should not be less then CONFIG_ENV_SIZE #endif -char *env_name_spec = "Flash"; +/* TODO(sjg@chromium.org): Figure out all these special cases */ +#if (!defined(CONFIG_MICROBLAZE) && !defined(CONFIG_ARCH_ZYNQ) && \ + !defined(CONFIG_TARGET_MCCMON6) && !defined(CONFIG_TARGET_X600) && \ + !defined(CONFIG_TARGET_EDMINIV2)) || \ + !defined(CONFIG_SPL_BUILD) +#define LOADENV +#endif + +#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_SPL_BUILD) +#define INITENV +#endif #ifdef ENV_IS_EMBEDDED env_t *env_ptr = &environment; -static env_t *flash_addr = (env_t *)CONFIG_ENV_ADDR; +static __maybe_unused env_t *flash_addr = (env_t *)CONFIG_ENV_ADDR; #else /* ! ENV_IS_EMBEDDED */ env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR; -static env_t *flash_addr = (env_t *)CONFIG_ENV_ADDR; +static __maybe_unused env_t *flash_addr = (env_t *)CONFIG_ENV_ADDR; #endif /* ENV_IS_EMBEDDED */ -#if defined(CMD_SAVEENV) || defined(CONFIG_ENV_ADDR_REDUND) /* CONFIG_ENV_ADDR is supposed to be on sector boundary */ -static ulong end_addr = CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1; -#endif +static ulong __maybe_unused end_addr = + CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1; #ifdef CONFIG_ENV_ADDR_REDUND -static env_t *flash_addr_new = (env_t *)CONFIG_ENV_ADDR_REDUND; + +static env_t __maybe_unused *flash_addr_new = (env_t *)CONFIG_ENV_ADDR_REDUND; /* CONFIG_ENV_ADDR_REDUND is supposed to be on sector boundary */ -static ulong end_addr_new = CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1; +static ulong __maybe_unused end_addr_new = + CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1; #endif /* CONFIG_ENV_ADDR_REDUND */ - #ifdef CONFIG_ENV_ADDR_REDUND -int env_init(void) +#ifdef INITENV +static int env_flash_init(void) { int crc1_ok = 0, crc2_ok = 0; @@ -75,35 +88,36 @@ int env_init(void) if (crc1_ok && !crc2_ok) { gd->env_addr = addr1; - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (!crc1_ok && crc2_ok) { gd->env_addr = addr2; - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (!crc1_ok && !crc2_ok) { gd->env_addr = addr_default; gd->env_valid = 0; } else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) { gd->env_addr = addr1; - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) { gd->env_addr = addr2; - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (flag1 == flag2) { gd->env_addr = addr1; - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else if (flag1 == 0xFF) { gd->env_addr = addr1; - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else if (flag2 == 0xFF) { gd->env_addr = addr2; - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } return 0; } +#endif #ifdef CMD_SAVEENV -int saveenv(void) +static int env_flash_save(void) { env_t env_new; char *saved_data = NULL; @@ -207,11 +221,12 @@ done: #else /* ! CONFIG_ENV_ADDR_REDUND */ -int env_init(void) +#ifdef INITENV +static int env_flash_init(void) { if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&(env_ptr->data); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; return 0; } @@ -219,9 +234,10 @@ int env_init(void) gd->env_valid = 0; return 0; } +#endif #ifdef CMD_SAVEENV -int saveenv(void) +static int env_flash_save(void) { env_t env_new; int rc = 1; @@ -291,7 +307,8 @@ done: #endif /* CONFIG_ENV_ADDR_REDUND */ -void env_relocate_spec(void) +#ifdef LOADENV +static int env_flash_load(void) { #ifdef CONFIG_ENV_ADDR_REDUND if (gd->env_addr != (ulong)&(flash_addr->data)) { @@ -309,7 +326,7 @@ void env_relocate_spec(void) crc32(0, flash_addr_new->data, ENV_SIZE) == flash_addr_new->crc) { char flag = OBSOLETE_FLAG; - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; flash_sect_protect(0, (ulong)flash_addr_new, end_addr_new); flash_write(&flag, (ulong)&(flash_addr_new->flags), @@ -321,7 +338,7 @@ void env_relocate_spec(void) (flash_addr->flags & ACTIVE_FLAG) == ACTIVE_FLAG) { char flag = ACTIVE_FLAG; - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; flash_sect_protect(0, (ulong)flash_addr, end_addr); flash_write(&flag, (ulong)&(flash_addr->flags), @@ -329,10 +346,27 @@ void env_relocate_spec(void) flash_sect_protect(1, (ulong)flash_addr, end_addr); } - if (gd->env_valid == 2) + if (gd->env_valid == ENV_REDUND) puts("*** Warning - some problems detected " "reading environment; recovered successfully\n\n"); #endif /* CONFIG_ENV_ADDR_REDUND */ env_import((char *)flash_addr, 1); + + return 0; } +#endif /* LOADENV */ + +U_BOOT_ENV_LOCATION(flash) = { + .location = ENVL_FLASH, + ENV_NAME("Flash") +#ifdef LOADENV + .load = env_flash_load, +#endif +#ifdef CMD_SAVEENV + .save = env_save_ptr(env_flash_save), +#endif +#ifdef INITENV + .init = env_flash_init, +#endif +}; diff --git a/common/env_mmc.c b/env/mmc.c index bb760a00ed..3f3092d975 100644 --- a/common/env_mmc.c +++ b/env/mmc.c @@ -23,14 +23,6 @@ #error CONFIG_ENV_SIZE_REDUND should be the same as CONFIG_ENV_SIZE #endif -char *env_name_spec = "MMC"; - -#ifdef ENV_IS_EMBEDDED -env_t *env_ptr = &environment; -#else /* ! ENV_IS_EMBEDDED */ -env_t *env_ptr; -#endif /* ENV_IS_EMBEDDED */ - DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_ENV_OFFSET) @@ -82,15 +74,6 @@ __weak int mmc_get_env_dev(void) return CONFIG_SYS_MMC_ENV_DEV; } -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} - #ifdef CONFIG_SYS_MMC_ENV_PART __weak uint mmc_get_env_part(struct mmc *mmc) { @@ -145,7 +128,7 @@ static void fini_mmc_for_env(struct mmc *mmc) #endif } -#ifdef CONFIG_CMD_SAVEENV +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD) static inline int write_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) { @@ -160,7 +143,7 @@ static inline int write_env(struct mmc *mmc, unsigned long size, return (n == blk_cnt) ? 0 : -1; } -int saveenv(void) +static int env_mmc_save(void) { ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); int dev = mmc_get_env_dev(); @@ -180,7 +163,7 @@ int saveenv(void) goto fini; #ifdef CONFIG_ENV_OFFSET_REDUND - if (gd->env_valid == 1) + if (gd->env_valid == ENV_VALID) copy = 1; #endif @@ -200,14 +183,14 @@ int saveenv(void) ret = 0; #ifdef CONFIG_ENV_OFFSET_REDUND - gd->env_valid = gd->env_valid == 2 ? 1 : 2; + gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND; #endif fini: fini_mmc_for_env(mmc); return ret; } -#endif /* CONFIG_CMD_SAVEENV */ +#endif /* CONFIG_CMD_SAVEENV && !CONFIG_SPL_BUILD */ static inline int read_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) @@ -224,7 +207,7 @@ static inline int read_env(struct mmc *mmc, unsigned long size, } #ifdef CONFIG_ENV_OFFSET_REDUND -void env_relocate_spec(void) +static int env_mmc_load(void) { #if !defined(ENV_IS_EMBEDDED) struct mmc *mmc; @@ -241,13 +224,13 @@ void env_relocate_spec(void) errmsg = init_mmc_for_env(mmc); if (errmsg) { - ret = 1; + ret = -EIO; goto err; } if (mmc_get_env_addr(mmc, 0, &offset1) || mmc_get_env_addr(mmc, 1, &offset2)) { - ret = 1; + ret = -EIO; goto fini; } @@ -262,13 +245,13 @@ void env_relocate_spec(void) if (read1_fail && read2_fail) { errmsg = "!bad CRC"; - ret = 1; + ret = -EIO; goto fini; } else if (!read1_fail && read2_fail) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; env_import((char *)tmp_env1, 1); } else if (read1_fail && !read2_fail) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; env_import((char *)tmp_env2, 1); } else { env_import_redund((char *)tmp_env1, (char *)tmp_env2); @@ -281,10 +264,12 @@ fini: err: if (ret) set_default_env(errmsg); + #endif + return ret; } #else /* ! CONFIG_ENV_OFFSET_REDUND */ -void env_relocate_spec(void) +static int env_mmc_load(void) { #if !defined(ENV_IS_EMBEDDED) ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); @@ -298,18 +283,18 @@ void env_relocate_spec(void) errmsg = init_mmc_for_env(mmc); if (errmsg) { - ret = 1; + ret = -EIO; goto err; } if (mmc_get_env_addr(mmc, 0, &offset)) { - ret = 1; + ret = -EIO; goto fini; } if (read_env(mmc, CONFIG_ENV_SIZE, offset, buf)) { errmsg = "!read failed"; - ret = 1; + ret = -EIO; goto fini; } @@ -322,5 +307,15 @@ err: if (ret) set_default_env(errmsg); #endif + return ret; } #endif /* CONFIG_ENV_OFFSET_REDUND */ + +U_BOOT_ENV_LOCATION(mmc) = { + .location = ENVL_MMC, + ENV_NAME("MMC") + .load = env_mmc_load, +#ifndef CONFIG_SPL_BUILD + .save = env_save_ptr(env_mmc_save), +#endif +}; diff --git a/common/env_nand.c b/env/nand.c index 760f6859e3..dea7b00720 100644 --- a/common/env_nand.c +++ b/env/nand.c @@ -24,7 +24,8 @@ #include <search.h> #include <errno.h> -#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) +#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) && \ + !defined(CONFIG_SPL_BUILD) #define CMD_SAVEENV #elif defined(CONFIG_ENV_OFFSET_REDUND) #error CONFIG_ENV_OFFSET_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_NAND @@ -39,8 +40,6 @@ #define CONFIG_ENV_RANGE CONFIG_ENV_SIZE #endif -char *env_name_spec = "NAND"; - #if defined(ENV_IS_EMBEDDED) env_t *env_ptr = &environment; #elif defined(CONFIG_NAND_ENV_DST) @@ -63,7 +62,7 @@ DECLARE_GLOBAL_DATA_PTR; * This way the SPL loads not only the U-Boot image from NAND but * also the environment. */ -int env_init(void) +static int env_nand_init(void) { #if defined(ENV_IS_EMBEDDED) || defined(CONFIG_NAND_ENV_DST) int crc1_ok = 0, crc2_ok = 0; @@ -84,37 +83,37 @@ int env_init(void) return 0; } else if (crc1_ok && !crc2_ok) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } #ifdef CONFIG_ENV_OFFSET_REDUND else if (!crc1_ok && crc2_ok) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else { /* both ok - check serial */ if (tmp_env1->flags == 255 && tmp_env2->flags == 0) - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; else if (tmp_env2->flags == 255 && tmp_env1->flags == 0) - gd->env_valid = 1; + gd->env_valid = ENV_VALID; else if (tmp_env1->flags > tmp_env2->flags) - gd->env_valid = 1; + gd->env_valid = ENV_VALID; else if (tmp_env2->flags > tmp_env1->flags) - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; else /* flags are equal - almost impossible */ - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } - if (gd->env_valid == 2) + if (gd->env_valid == ENV_REDUND) env_ptr = tmp_env2; else #endif - if (gd->env_valid == 1) + if (gd->env_valid == ENV_VALID) env_ptr = tmp_env1; gd->env_addr = (ulong)env_ptr->data; #else /* ENV_IS_EMBEDDED || CONFIG_NAND_ENV_DST */ gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; + gd->env_valid = ENV_VALID; #endif /* ENV_IS_EMBEDDED || CONFIG_NAND_ENV_DST */ return 0; @@ -158,12 +157,12 @@ static int writeenv(size_t offset, u_char *buf) return 0; } -struct env_location { +struct nand_env_location { const char *name; const nand_erase_options_t erase_opts; }; -static int erase_and_write_env(const struct env_location *location, +static int erase_and_write_env(const struct nand_env_location *location, u_char *env_new) { struct mtd_info *mtd; @@ -184,12 +183,12 @@ static int erase_and_write_env(const struct env_location *location, return ret; } -int saveenv(void) +static int env_nand_save(void) { int ret = 0; ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); int env_idx = 0; - static const struct env_location location[] = { + static const struct nand_env_location location[] = { { .name = "NAND", .erase_opts = { @@ -217,14 +216,15 @@ int saveenv(void) return ret; #ifdef CONFIG_ENV_OFFSET_REDUND - env_idx = (gd->env_valid == 1); + env_idx = (gd->env_valid == ENV_VALID); #endif ret = erase_and_write_env(&location[env_idx], (u_char *)env_new); #ifdef CONFIG_ENV_OFFSET_REDUND if (!ret) { /* preset other copy for next write */ - gd->env_valid = gd->env_valid == 2 ? 1 : 2; + gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : + ENV_REDUND; return ret; } @@ -302,7 +302,7 @@ int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result) } if (oob_buf[0] == ENV_OOB_MARKER) { - *result = oob_buf[1] * mtd->erasesize; + *result = ovoid ob_buf[1] * mtd->erasesize; } else if (oob_buf[0] == ENV_OOB_MARKER_OLD) { *result = oob_buf[1]; } else { @@ -315,17 +315,21 @@ int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result) #endif #ifdef CONFIG_ENV_OFFSET_REDUND -void env_relocate_spec(void) +static int env_nand_load(void) { -#if !defined(ENV_IS_EMBEDDED) +#if defined(ENV_IS_EMBEDDED) + return 0; +#else int read1_fail = 0, read2_fail = 0; env_t *tmp_env1, *tmp_env2; + int ret = 0; tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE); tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE); if (tmp_env1 == NULL || tmp_env2 == NULL) { puts("Can't allocate buffers for environment\n"); set_default_env("!malloc() failed"); + ret = -EIO; goto done; } @@ -342,10 +346,10 @@ void env_relocate_spec(void) set_default_env("!bad env area"); goto done; } else if (!read1_fail && read2_fail) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; env_import((char *)tmp_env1, 1); } else if (read1_fail && !read2_fail) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; env_import((char *)tmp_env2, 1); } else { env_import_redund((char *)tmp_env1, (char *)tmp_env2); @@ -355,6 +359,7 @@ done: free(tmp_env1); free(tmp_env2); + return ret; #endif /* ! ENV_IS_EMBEDDED */ } #else /* ! CONFIG_ENV_OFFSET_REDUND */ @@ -363,7 +368,7 @@ done: * device i.e., nand_dev_desc + 0. This is also the behaviour using * the new NAND code. */ -void env_relocate_spec(void) +static int env_nand_load(void) { #if !defined(ENV_IS_EMBEDDED) int ret; @@ -386,10 +391,22 @@ void env_relocate_spec(void) ret = readenv(CONFIG_ENV_OFFSET, (u_char *)buf); if (ret) { set_default_env("!readenv() failed"); - return; + return -EIO; } env_import(buf, 1); #endif /* ! ENV_IS_EMBEDDED */ + + return 0; } #endif /* CONFIG_ENV_OFFSET_REDUND */ + +U_BOOT_ENV_LOCATION(nand) = { + .location = ENVL_NAND, + ENV_NAME("NAND") + .load = env_nand_load, +#if defined(CMD_SAVEENV) + .save = env_save_ptr(env_nand_save), +#endif + .init = env_nand_init, +}; diff --git a/common/env_nowhere.c b/env/nowhere.c index bdc1ed5e67..d60de494e6 100644 --- a/common/env_nowhere.c +++ b/env/nowhere.c @@ -15,21 +15,7 @@ DECLARE_GLOBAL_DATA_PTR; -env_t *env_ptr; - -void env_relocate_spec(void) -{ -} - -/* - * Initialize Environment use - * - * We are still running from ROM, so data use is limited - */ -int env_init(void) -{ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 0; - - return 0; -} +U_BOOT_ENV_LOCATION(nowhere) = { + .location = ENVL_NOWHERE, + ENV_NAME("nowhere") +}; diff --git a/common/env_nvram.c b/env/nvram.c index 524f07d5f8..5fb3115ce6 100644 --- a/common/env_nvram.c +++ b/env/nvram.c @@ -36,15 +36,12 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE extern void *nvram_read(void *dest, const long src, size_t count); extern void nvram_write(long dest, const void *src, size_t count); -env_t *env_ptr; #else env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR; #endif -char *env_name_spec = "NVRAM"; - #ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE -uchar env_get_char_spec(int index) +static int env_nvram_get_char(int index) { uchar c; @@ -54,7 +51,7 @@ uchar env_get_char_spec(int index) } #endif -void env_relocate_spec(void) +static int env_nvram_load(void) { char buf[CONFIG_ENV_SIZE]; @@ -64,9 +61,11 @@ void env_relocate_spec(void) memcpy(buf, (void *)CONFIG_ENV_ADDR, CONFIG_ENV_SIZE); #endif env_import(buf, 1); + + return 0; } -int saveenv(void) +static int env_nvram_save(void) { env_t env_new; int rcode = 0; @@ -89,7 +88,7 @@ int saveenv(void) * * We are still running from ROM, so data use is limited */ -int env_init(void) +static int env_nvram_init(void) { #if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE) ulong crc; @@ -104,7 +103,7 @@ int env_init(void) if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&env_ptr->data; #endif - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else { gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 0; @@ -112,3 +111,14 @@ int env_init(void) return 0; } + +U_BOOT_ENV_LOCATION(nvram) = { + .location = ENVL_NVRAM, + ENV_NAME("NVRAM") +#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE + .get_char = env_nvram_get_char, +#endif + .load = env_nvram_load, + .save = env_save_ptr(env_nvram_save), + .init = env_nvram_init, +}; diff --git a/common/env_onenand.c b/env/onenand.c index cc3d670de8..2e3045c5f5 100644 --- a/common/env_onenand.c +++ b/env/onenand.c @@ -21,14 +21,12 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/onenand.h> -char *env_name_spec = "OneNAND"; - #define ONENAND_MAX_ENV_SIZE CONFIG_ENV_SIZE #define ONENAND_ENV_SIZE(mtd) (ONENAND_MAX_ENV_SIZE - ENV_HEADER_SIZE) DECLARE_GLOBAL_DATA_PTR; -void env_relocate_spec(void) +static int env_onenand_load(void) { struct mtd_info *mtd = &onenand_mtd; #ifdef CONFIG_ENV_ADDR_FLEX @@ -60,10 +58,12 @@ void env_relocate_spec(void) rc = env_import(buf, 1); if (rc) - gd->env_valid = 1; + gd->env_valid = ENV_VALID; + + return rc ? 0 : -EIO; } -int saveenv(void) +static int env_onenand_save(void) { env_t env_new; int ret; @@ -106,11 +106,9 @@ int saveenv(void) return 0; } -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} +U_BOOT_ENV_LOCATION(onenand) = { + .location = ENVL_ONENAND, + ENV_NAME("OneNAND") + .load = env_onenand_load, + .save = env_save_ptr(env_onenand_save), +}; diff --git a/common/env_remote.c b/env/remote.c index eb977ee1fe..c013fdd4b0 100644 --- a/common/env_remote.c +++ b/env/remote.c @@ -11,8 +11,6 @@ #include <environment.h> #include <linux/stddef.h> -char *env_name_spec = "Remote"; - #ifdef ENV_IS_EMBEDDED env_t *env_ptr = &environment; #else /* ! ENV_IS_EMBEDDED */ @@ -25,21 +23,19 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_ENV_OFFSET 0 #endif -int env_init(void) +static int env_remote_init(void) { if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&(env_ptr->data); - gd->env_valid = 1; + gd->env_valid = ENV_VALID; return 0; } - gd->env_addr = (ulong)default_environment; - gd->env_valid = 0; - return 0; + return -ENOENT; } #ifdef CONFIG_CMD_SAVEENV -int saveenv(void) +static int env_remote_save(void) { #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE printf("Can not support the 'saveenv' when boot from SRIO or PCIE!\n"); @@ -50,9 +46,19 @@ int saveenv(void) } #endif /* CONFIG_CMD_SAVEENV */ -void env_relocate_spec(void) +static int env_remote_load(void) { #ifndef ENV_IS_EMBEDDED env_import((char *)env_ptr, 1); #endif + + return 0; } + +U_BOOT_ENV_LOCATION(remote) = { + .location = ENVL_REMOTE, + ENV_NAME("Remote") + .load = env_remote_load, + .save = env_save_ptr(env_remote_save), + .init = env_remote_init, +}; diff --git a/common/env_sata.c b/env/sata.c index b0cee35a60..a77029774e 100644 --- a/common/env_sata.c +++ b/env/sata.c @@ -24,8 +24,6 @@ #error CONFIG_ENV_OFFSET or CONFIG_ENV_SIZE not defined #endif -char *env_name_spec = "SATA"; - DECLARE_GLOBAL_DATA_PTR; __weak int sata_get_env_dev(void) @@ -33,15 +31,6 @@ __weak int sata_get_env_dev(void) return CONFIG_SYS_SATA_ENV_DEV; } -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} - #ifdef CONFIG_CMD_SAVEENV static inline int write_env(struct blk_desc *sata, unsigned long size, unsigned long offset, void *buffer) @@ -56,7 +45,7 @@ static inline int write_env(struct blk_desc *sata, unsigned long size, return (n == blk_cnt) ? 0 : -1; } -int saveenv(void) +static int env_sata_save(void) { ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); struct blk_desc *sata = NULL; @@ -102,26 +91,36 @@ static inline int read_env(struct blk_desc *sata, unsigned long size, return (n == blk_cnt) ? 0 : -1; } -void env_relocate_spec(void) +static void env_sata_load(void) { ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); struct blk_desc *sata = NULL; int env_sata; if (sata_initialize()) - return; + return -EIO; env_sata = sata_get_env_dev(); sata = sata_get_dev(env_sata); if (sata == NULL) { - printf("Unknown SATA(%d) device for environment!\n", - env_sata); - return; + printf("Unknown SATA(%d) device for environment!\n", env_sata); + return -EIO; } - if (read_env(sata, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) - return set_default_env(NULL); + if (read_env(sata, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) { + set_default_env(NULL); + return -EIO; + } env_import(buf, 1); + + return 0; } + +U_BOOT_ENV_LOCATION(sata) = { + .location = ENVL_ESATA, + ENV_NAME("SATA") + .load = env_sata_load, + .save = env_save_ptr(env_sata_save), +}; diff --git a/common/env_sf.c b/env/sf.c index 45f441a042..6f74371c09 100644 --- a/common/env_sf.c +++ b/env/sf.c @@ -32,9 +32,15 @@ # define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE #endif +#ifndef CONFIG_SPL_BUILD +#define CMD_SAVEENV +#endif + #ifdef CONFIG_ENV_OFFSET_REDUND +#ifdef CMD_SAVEENV static ulong env_offset = CONFIG_ENV_OFFSET; static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND; +#endif #define ACTIVE_FLAG 1 #define OBSOLETE_FLAG 0 @@ -42,8 +48,6 @@ static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND; DECLARE_GLOBAL_DATA_PTR; -char *env_name_spec = "SPI Flash"; - static struct spi_flash *env_flash; static int setup_flash_device(void) @@ -57,7 +61,7 @@ static int setup_flash_device(void) 0, 0, &new); if (ret) { set_default_env("!spi_flash_probe_bus_cs() failed"); - return 1; + return ret; } env_flash = dev_get_uclass_priv(new); @@ -69,7 +73,7 @@ static int setup_flash_device(void) CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); if (!env_flash) { set_default_env("!spi_flash_probe() failed"); - return 1; + return -EIO; } } #endif @@ -77,7 +81,8 @@ static int setup_flash_device(void) } #if defined(CONFIG_ENV_OFFSET_REDUND) -int saveenv(void) +#ifdef CMD_SAVEENV +static int env_sf_save(void) { env_t env_new; char *saved_buffer = NULL, flag = OBSOLETE_FLAG; @@ -90,10 +95,10 @@ int saveenv(void) ret = env_export(&env_new); if (ret) - return ret; + return -EIO; env_new.flags = ACTIVE_FLAG; - if (gd->env_valid == 1) { + if (gd->env_valid == ENV_VALID) { env_new_offset = CONFIG_ENV_OFFSET_REDUND; env_offset = CONFIG_ENV_OFFSET; } else { @@ -107,7 +112,7 @@ int saveenv(void) saved_offset = env_new_offset + CONFIG_ENV_SIZE; saved_buffer = memalign(ARCH_DMA_MINALIGN, saved_size); if (!saved_buffer) { - ret = 1; + ret = -ENOMEM; goto done; } ret = spi_flash_read(env_flash, saved_offset, @@ -145,7 +150,7 @@ int saveenv(void) puts("done\n"); - gd->env_valid = gd->env_valid == 2 ? 1 : 2; + gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND; printf("Valid environment: %d\n", (int)gd->env_valid); @@ -155,8 +160,9 @@ int saveenv(void) return ret; } +#endif /* CMD_SAVEENV */ -void env_relocate_spec(void) +static int env_sf_load(void) { int ret; int crc1_ok = 0, crc2_ok = 0; @@ -170,6 +176,7 @@ void env_relocate_spec(void) CONFIG_ENV_SIZE); if (!tmp_env1 || !tmp_env2) { set_default_env("!malloc() failed"); + ret = -EIO; goto out; } @@ -196,32 +203,33 @@ void env_relocate_spec(void) if (!crc1_ok && !crc2_ok) { set_default_env("!bad CRC"); + ret = -EIO; goto err_read; } else if (crc1_ok && !crc2_ok) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (!crc1_ok && crc2_ok) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else if (tmp_env1->flags == ACTIVE_FLAG && tmp_env2->flags == OBSOLETE_FLAG) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (tmp_env1->flags == OBSOLETE_FLAG && tmp_env2->flags == ACTIVE_FLAG) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else if (tmp_env1->flags == tmp_env2->flags) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (tmp_env1->flags == 0xFF) { - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } else if (tmp_env2->flags == 0xFF) { - gd->env_valid = 2; + gd->env_valid = ENV_REDUND; } else { /* * this differs from code in env_flash.c, but I think a sane * default path is desirable. */ - gd->env_valid = 1; + gd->env_valid = ENV_VALID; } - if (gd->env_valid == 1) + if (gd->env_valid == ENV_VALID) ep = tmp_env1; else ep = tmp_env2; @@ -238,9 +246,12 @@ err_read: out: free(tmp_env1); free(tmp_env2); + + return ret; } #else -int saveenv(void) +#ifdef CMD_SAVEENV +static int env_sf_save(void) { u32 saved_size, saved_offset, sector; char *saved_buffer = NULL; @@ -299,8 +310,9 @@ int saveenv(void) return ret; } +#endif /* CMD_SAVEENV */ -void env_relocate_spec(void) +static int env_sf_load(void) { int ret; char *buf = NULL; @@ -308,7 +320,7 @@ void env_relocate_spec(void) buf = (char *)memalign(ARCH_DMA_MINALIGN, CONFIG_ENV_SIZE); if (!buf) { set_default_env("!malloc() failed"); - return; + return -EIO; } ret = setup_flash_device(); @@ -324,21 +336,23 @@ void env_relocate_spec(void) ret = env_import(buf, 1); if (ret) - gd->env_valid = 1; + gd->env_valid = ENV_VALID; err_read: spi_flash_free(env_flash); env_flash = NULL; out: free(buf); + + return ret; } #endif -int env_init(void) -{ - /* SPI flash isn't usable before relocation */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} +U_BOOT_ENV_LOCATION(sf) = { + .location = ENVL_SPI_FLASH, + ENV_NAME("SPI Flash") + .load = env_sf_load, +#ifdef CMD_SAVEENV + .save = env_save_ptr(env_sf_save), +#endif +}; diff --git a/common/env_ubi.c b/env/ubi.c index 95b527ddca..1c4653d4f6 100644 --- a/common/env_ubi.c +++ b/env/ubi.c @@ -16,24 +16,11 @@ #include <ubi_uboot.h> #undef crc32 -char *env_name_spec = "UBI"; - -env_t *env_ptr; - DECLARE_GLOBAL_DATA_PTR; -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} - #ifdef CONFIG_CMD_SAVEENV #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT -int saveenv(void) +static int env_ubi_save(void) { ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); int ret; @@ -48,7 +35,7 @@ int saveenv(void) return 1; } - if (gd->env_valid == 1) { + if (gd->env_valid == ENV_VALID) { puts("Writing to redundant UBI... "); if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME_REDUND, (void *)env_new, CONFIG_ENV_SIZE)) { @@ -70,12 +57,12 @@ int saveenv(void) puts("done\n"); - gd->env_valid = gd->env_valid == 2 ? 1 : 2; + gd->env_valid = gd->env_valid == ENV_REDUND ? ENV_VALID : ENV_REDUND; return 0; } #else /* ! CONFIG_SYS_REDUNDAND_ENVIRONMENT */ -int saveenv(void) +static int env_ubi_save(void) { ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); int ret; @@ -104,7 +91,7 @@ int saveenv(void) #endif /* CONFIG_CMD_SAVEENV */ #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT -void env_relocate_spec(void) +static int env_ubi_load(void) { ALLOC_CACHE_ALIGN_BUFFER(char, env1_buf, CONFIG_ENV_SIZE); ALLOC_CACHE_ALIGN_BUFFER(char, env2_buf, CONFIG_ENV_SIZE); @@ -128,7 +115,7 @@ void env_relocate_spec(void) printf("\n** Cannot find mtd partition \"%s\"\n", CONFIG_ENV_UBI_PART); set_default_env(NULL); - return; + return -EIO; } if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME, (void *)tmp_env1, @@ -144,9 +131,11 @@ void env_relocate_spec(void) } env_import_redund((char *)tmp_env1, (char *)tmp_env2); + + return 0; } #else /* ! CONFIG_SYS_REDUNDAND_ENVIRONMENT */ -void env_relocate_spec(void) +static int env_ubi_load(void) { ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); @@ -164,16 +153,24 @@ void env_relocate_spec(void) printf("\n** Cannot find mtd partition \"%s\"\n", CONFIG_ENV_UBI_PART); set_default_env(NULL); - return; + return -EIO; } if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME, buf, CONFIG_ENV_SIZE)) { printf("\n** Unable to read env from %s:%s **\n", CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME); set_default_env(NULL); - return; + return -EIO; } env_import(buf, 1); + + return 0; } #endif /* CONFIG_SYS_REDUNDAND_ENVIRONMENT */ + +U_BOOT_ENV_LOCATION(ubi) = { + .location = ENVL_UBI, + .load = env_ubi_load, + .save = env_save_ptr(env_ubi_save), +}; diff --git a/fs/Kconfig b/fs/Kconfig index e6438ad0ea..e6803ac8cb 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -18,4 +18,6 @@ source "fs/ubifs/Kconfig" source "fs/cramfs/Kconfig" +source "fs/yaffs2/Kconfig" + endmenu @@ -348,7 +348,7 @@ int do_size(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], if (fs_size(argv[3], &size) < 0) return CMD_RET_FAILURE; - setenv_hex("filesize", size); + env_set_hex("filesize", size); return 0; } @@ -379,7 +379,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], if (ep == argv[3] || *ep != '\0') return CMD_RET_USAGE; } else { - addr_str = getenv("loadaddr"); + addr_str = env_get("loadaddr"); if (addr_str != NULL) addr = simple_strtoul(addr_str, NULL, 16); else @@ -388,7 +388,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], if (argc >= 5) { filename = argv[4]; } else { - filename = getenv("bootfile"); + filename = env_get("bootfile"); if (!filename) { puts("** No boot file defined **\n"); return 1; @@ -417,8 +417,8 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], } puts("\n"); - setenv_hex("fileaddr", addr); - setenv_hex("filesize", len_read); + env_set_hex("fileaddr", addr); + env_set_hex("filesize", len_read); return 0; } @@ -509,7 +509,7 @@ int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], return CMD_RET_FAILURE; if (argc == 4) - setenv(argv[3], uuid); + env_set(argv[3], uuid); else printf("%s\n", uuid); @@ -529,7 +529,7 @@ int do_fs_type(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) info = fs_get_info(fs_type); if (argc == 4) - setenv(argv[3], info->name); + env_set(argv[3], info->name); else printf("%s\n", info->name); diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index db29489eca..8f1c9d167d 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -941,7 +941,7 @@ int ubifs_load(char *filename, u32 addr, u32 size) err = ubifs_read(filename, (void *)(uintptr_t)addr, 0, size, &actread); if (err == 0) { - setenv_hex("filesize", actread); + env_set_hex("filesize", actread); printf("Done\n"); } diff --git a/fs/yaffs2/Kconfig b/fs/yaffs2/Kconfig new file mode 100644 index 0000000000..45ffdf6c26 --- /dev/null +++ b/fs/yaffs2/Kconfig @@ -0,0 +1,7 @@ +config YAFFS2 + bool "YAFFS2 filesystem support" + help + This provides access to YAFFS2 filesystems. Yet Another Flash + Filesystem 2 is a filesystem designed specifically for NAND flash. + It incorporates bad-block management and ensures that device + writes are sequential regardless of filesystem activity. diff --git a/include/_exports.h b/include/_exports.h index 6ff4364e44..5416041243 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -31,8 +31,8 @@ EXPORT_FUNC(vprintf, int, vprintf, const char *, va_list) EXPORT_FUNC(do_reset, int, do_reset, cmd_tbl_t *, int , int , char * const []) - EXPORT_FUNC(getenv, char *, getenv, const char*) - EXPORT_FUNC(setenv, int, setenv, const char *, const char *) + EXPORT_FUNC(env_get, char *, env_get, const char*) + EXPORT_FUNC(env_set, int, env_set, const char *, const char *) EXPORT_FUNC(simple_strtoul, unsigned long, simple_strtoul, const char *, char **, unsigned int) EXPORT_FUNC(strict_strtoul, int, strict_strtoul, diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 86bf6565f6..944f58195c 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -49,7 +49,7 @@ typedef struct global_data { unsigned long precon_buf_idx; /* Pre-Console buffer index */ #endif unsigned long env_addr; /* Address of Environment struct */ - unsigned long env_valid; /* Checksum of Environment valid? */ + unsigned long env_valid; /* Environment valid? enum env_valid */ unsigned long ram_top; /* Top address of RAM used by U-Boot */ unsigned long relocaddr; /* Start address of U-Boot in RAM */ @@ -76,7 +76,7 @@ typedef struct global_data { struct device_node *of_root; #endif struct jt_funcs *jt; /* jump table */ - char env_buf[32]; /* buffer for getenv() before reloc. */ + char env_buf[32]; /* buffer for env_get() before reloc. */ #ifdef CONFIG_TRACE void *trace_buff; /* The trace buffer */ #endif diff --git a/include/blk.h b/include/blk.h index 1e6239ac9e..61b56281b3 100644 --- a/include/blk.h +++ b/include/blk.h @@ -31,6 +31,7 @@ enum if_type { IF_TYPE_SATA, IF_TYPE_HOST, IF_TYPE_SYSTEMACE, + IF_TYPE_NVME, IF_TYPE_COUNT, /* Number of interface types */ }; diff --git a/include/command.h b/include/command.h index 08f04867dd..767cabb3df 100644 --- a/include/command.h +++ b/include/command.h @@ -80,11 +80,10 @@ int cmd_process_error(cmd_tbl_t *cmdtp, int err); * void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); */ -#if defined(CONFIG_CMD_MEMORY) \ - || defined(CONFIG_CMD_I2C) \ - || defined(CONFIG_CMD_ITEST) \ - || defined(CONFIG_CMD_PCI) \ - || defined(CONFIG_CMD_PORTIO) +#if defined(CONFIG_CMD_MEMORY) || \ + defined(CONFIG_CMD_I2C) || \ + defined(CONFIG_CMD_ITEST) || \ + defined(CONFIG_CMD_PCI) #define CMD_DATA_SIZE extern int cmd_get_data_size(char* arg, int default_size); #endif diff --git a/include/common.h b/include/common.h index c8fb277cde..aaed131671 100644 --- a/include/common.h +++ b/include/common.h @@ -311,16 +311,45 @@ int env_init (void); void env_relocate (void); int envmatch (uchar *, int); -/* Avoid unfortunate conflict with libc's getenv() */ -#ifdef CONFIG_SANDBOX -#define getenv uboot_getenv -#endif -char *getenv (const char *); -int getenv_f (const char *name, char *buf, unsigned len); -ulong getenv_ulong(const char *name, int base, ulong default_val); +/** + * env_get() - Look up the value of an environment variable + * + * In U-Boot proper this can be called before relocation (which is when the + * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that + * case this function calls env_get_f(). + * + * @varname: Variable to look up + * @return value of variable, or NULL if not found + */ +char *env_get(const char *varname); + +/** + * env_get_f() - Look up the value of an environment variable (early) + * + * This function is called from env_get() if the environment has not been + * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will + * support reading the value (slowly) and some will not. + * + * @varname: Variable to look up + * @return value of variable, or NULL if not found + */ +int env_get_f(const char *name, char *buf, unsigned len); + +/** + * env_get_ulong() - Return an environment variable as an integer value + * + * Most U-Boot environment variables store hex values. For those which store + * (e.g.) base-10 integers, this function can be used to read the value. + * + * @name: Variable to look up + * @base: Base to use (e.g. 10 for base 10, 2 for binary) + * @default_val: Default value to return if no value is found + * @return the value found, or @default_val if none + */ +ulong env_get_ulong(const char *name, int base, ulong default_val); /** - * getenv_hex() - Return an environment variable as a hex value + * env_get_hex() - Return an environment variable as a hex value * * Decode an environment as a hex number (it may or may not have a 0x * prefix). If the environment variable cannot be found, or does not start @@ -329,27 +358,54 @@ ulong getenv_ulong(const char *name, int base, ulong default_val); * @varname: Variable to decode * @default_val: Value to return on error */ -ulong getenv_hex(const char *varname, ulong default_val); +ulong env_get_hex(const char *varname, ulong default_val); /* * Read an environment variable as a boolean * Return -1 if variable does not exist (default to true) */ -int getenv_yesno(const char *var); -int saveenv (void); -int setenv (const char *, const char *); -int setenv_ulong(const char *varname, ulong value); -int setenv_hex(const char *varname, ulong value); +int env_get_yesno(const char *var); + +/** + * env_set() - set an environment variable + * + * This sets or deletes the value of an environment variable. For setting the + * value the variable is created if it does not already exist. + * + * @varname: Variable to adjust + * @value: Value to set for the variable, or NULL or "" to delete the variable + * @return 0 if OK, 1 on error + */ +int env_set(const char *varname, const char *value); + +/** + * env_set_ulong() - set an environment variable to an integer + * + * @varname: Variable to adjust + * @value: Value to set for the variable (will be converted to a string) + * @return 0 if OK, 1 on error + */ +int env_set_ulong(const char *varname, ulong value); + +/** + * env_set_hex() - set an environment variable to a hex value + * + * @varname: Variable to adjust + * @value: Value to set for the variable (will be converted to a hex string) + * @return 0 if OK, 1 on error + */ +int env_set_hex(const char *varname, ulong value); + /** - * setenv_addr - Set an environment variable to an address in hex + * env_set_addr - Set an environment variable to an address in hex * * @varname: Environment variable to set * @addr: Value to set it to * @return 0 if ok, 1 on error */ -static inline int setenv_addr(const char *varname, const void *addr) +static inline int env_set_addr(const char *varname, const void *addr) { - return setenv_hex(varname, (ulong)addr); + return env_set_hex(varname, (ulong)addr); } #ifdef CONFIG_AUTO_COMPLETE @@ -693,9 +749,9 @@ int zzip(void *dst, unsigned long *lenp, unsigned char *src, /* lib/net_utils.c */ #include <net.h> -static inline struct in_addr getenv_ip(char *var) +static inline struct in_addr env_get_ip(char *var) { - return string_to_ip(getenv(var)); + return string_to_ip(env_get(var)); } int pcmcia_init (void); diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h deleted file mode 100644 index e6ebc2f57d..0000000000 --- a/include/config_cmd_all.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License Version 2. This file is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef _CONFIG_CMD_ALL_H -#define _CONFIG_CMD_ALL_H - -/* - * Alphabetical list of all possible commands. - */ - -#define CONFIG_CMD_MFSL /* FSL support for Microblaze */ -#define CONFIG_CMD_ONENAND /* OneNAND support */ -#define CONFIG_CMD_PCI /* pciinfo */ -#define CONFIG_CMD_PCMCIA /* PCMCIA support */ -#define CONFIG_CMD_PORTIO /* Port I/O */ -#define CONFIG_CMD_REGINFO /* Register dump */ -#define CONFIG_CMD_REISER /* Reiserfs support */ -#define CONFIG_CMD_READ /* Read data from partition */ -#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ -#define CONFIG_CMD_SAVES /* save S record dump */ -#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ -#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ -#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ -#define CONFIG_CMD_ZFS /* ZFS Support */ - -#endif /* _CONFIG_CMD_ALL_H */ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index d8dab8e46a..9ed6b9892c 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -198,7 +198,7 @@ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE #endif -#if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) +#if defined(CONFIG_DM_PCI) #define BOOTENV_RUN_NET_PCI_ENUM "run boot_net_pci_enum; " #define BOOTENV_SHARED_PCI \ "boot_net_pci_enum=pci enum\0" diff --git a/include/config_fsl_chain_trust.h b/include/config_fsl_chain_trust.h index 6ec577bffa..4bbcd13158 100644 --- a/include/config_fsl_chain_trust.h +++ b/include/config_fsl_chain_trust.h @@ -28,7 +28,7 @@ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" */ -#ifdef CONFIG_BOOTARGS +#ifdef CONFIG_USE_BOOTARGS #define CONFIG_SET_BOOTARGS "setenv bootargs \'" CONFIG_BOOTARGS" \';" #else #define CONFIG_SET_BOOTARGS "setenv bootargs \'root=/dev/ram " \ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 90296cdb3e..f2313a5cca 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -690,15 +690,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 57d4bed89a..19c772c968 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -285,11 +285,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 04a505398a..92ff88bebc 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -77,8 +77,6 @@ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_CMD_PCI - /* * PCI Windows * Memory space is mapped 1-1, but I/O space must start from 0. @@ -510,11 +508,6 @@ combinations. this should be removed later #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 962bf4aa4c..8c664b184d 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -77,8 +77,6 @@ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_CMD_PCI - /* * PCI Windows * Memory space is mapped 1-1, but I/O space must start from 0. @@ -428,11 +426,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 0fbf457cdc..c56cbd9f54 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -161,8 +161,8 @@ #define CONFIG_ENV_SECT_SIZE 0x2000 #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text*); /* Cache Configuration */ #define CONFIG_SYS_CACHELINE_SIZE 16 diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 57328c6269..57bc57817d 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -33,9 +33,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* Command line configuration */ -#define CONFIG_CMD_PCI - #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC # define CONFIG_MII 1 @@ -179,7 +176,7 @@ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text); + env/embedded.o(.text); #ifdef NORFLASH_PS32BIT # define CONFIG_ENV_OFFSET (0x8000) diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index f6027e231f..df0733e6c2 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -85,8 +85,8 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text); #define CONFIG_ENV_OFFSET 0x4000 /* Address of Environment Sector*/ #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 2bdfe80ef5..da8333ac6f 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -29,8 +29,8 @@ #endif #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text*); /* * Command line configuration. diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 0722ea19e3..5a2f0e204f 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -31,7 +31,7 @@ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text) + env/embedded.o(.text) /* * BOOTP options diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index e6bd7f3609..f5693d8178 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -39,8 +39,8 @@ #endif #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text); /* * BOOTP options diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 6bcd6b6f2e..339a03c7b1 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -40,8 +40,8 @@ #endif #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text); /* * BOOTP options diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index cc703aac19..3f2d9a9bac 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -32,7 +32,7 @@ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); + env/embedded.o(.text*); /* * BOOTP options diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index d50c874fe1..45e4be2f01 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -44,8 +44,6 @@ # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE # define MCFFEC_TOUT_LOOP 50000 -# define CONFIG_BOOTARGS "root=/dev/mtdblock3 rw rootfstype=jffs2" - /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ # ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL @@ -185,7 +183,7 @@ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*) + env/embedded.o(.text*) /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index f7b284fda8..1b5cae2dfe 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -185,8 +185,8 @@ #define CONFIG_ENV_SECT_SIZE 0x2000 #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text*); /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index b85e0f088f..a0e582e2b8 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -185,8 +185,8 @@ #define CONFIG_ENV_SECT_SIZE 0x2000 #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text*); /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 7552f4daf6..6822b4c6d3 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -67,22 +67,6 @@ #define CONFIG_SYS_FEC0_PHYADDR 0 #define CONFIG_SYS_FEC1_PHYADDR 1 - -#ifdef CONFIG_SYS_NAND_BOOT -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ - "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \ - "-(jffs2) console=ttyS0,115200" -#else -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \ - __stringify(CONFIG_SERVERIP) ":/tftpboot/" \ - __stringify(CONFIG_IPADDR) " ip=" \ - __stringify(CONFIG_IPADDR) ":" \ - __stringify(CONFIG_SERVERIP)":" \ - __stringify(CONFIG_GATEWAYIP)": " \ - __stringify(CONFIG_NETMASK) \ - "::eth0:off:rw console=ttyS0,115200" -#endif - #define CONFIG_ETHPRIME "FEC0" #define CONFIG_IPADDR 192.168.1.2 #define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 6eb8eaddf1..f6d92512be 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -48,7 +48,6 @@ # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE # define MCFFEC_TOUT_LOOP 50000 -# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 8702b89174..f1acf07db7 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -35,9 +35,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* Command line configuration */ -#undef CONFIG_CMD_PCI - /* Network configuration */ #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC @@ -54,7 +51,6 @@ # define MCFFEC_TOUT_LOOP 50000 # define CONFIG_HAS_ETH1 -# define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 9dca52e78a..b51d69568a 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -25,9 +25,6 @@ #undef CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -/* Command line configuration */ -#define CONFIG_CMD_PCI - #define CONFIG_SLTTMR #define CONFIG_FSLDMAFEC @@ -68,9 +65,6 @@ #ifdef CONFIG_CMD_USB # define CONFIG_USB_OHCI_NEW -# ifndef CONFIG_CMD_PCI -# define CONFIG_CMD_PCI -# endif # define CONFIG_PCI_OHCI # undef CONFIG_SYS_USB_OHCI_BOARD_INIT diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index d95be2bd5e..56af0e3a5f 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -25,9 +25,6 @@ #undef CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ -/* Command line configuration */ -#define CONFIG_CMD_PCI - #define CONFIG_SLTTMR #define CONFIG_FSLDMAFEC @@ -67,9 +64,6 @@ #ifdef CONFIG_CMD_USB # define CONFIG_USB_OHCI_NEW -# ifndef CONFIG_CMD_PCI -# define CONFIG_CMD_PCI -# endif /*# define CONFIG_PCI_OHCI*/ # define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80041000 # define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 17090da796..1e6d057fd8 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -62,10 +62,6 @@ #define CONFIG_NETMASK 255.0.0.0 #define CONFIG_BOOTCOMMAND "run flashboot" -#define CONFIG_BOOTARGS "ubi.mtd=4 root=ubi0:rootfs rw " \ - "rootfstype=ubifs rootflags=sync " \ - "console=ttyCPM0,115200N8 " \ - "ip=${ipaddr}:::${netmask}:mcr3k:eth0:off" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CONFIG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ @@ -151,7 +147,4 @@ #define BOOTFLAG_COLD 0x01 #define BOOTFLAG_WARM 0x02 -/* Misc Settings */ -#define CONFIG_CMD_REGINFO - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 25d5cab959..8460b814ad 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -415,7 +415,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index d666f960b6..3a031a833a 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -463,7 +463,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 69107ca12d..e2cc815dd5 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -442,7 +442,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -585,8 +584,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index b8f8f493eb..7f99bd2888 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -319,10 +319,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 428f3abf90..a60f1b38e7 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -403,10 +403,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -561,8 +557,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 18f7523692..b984ea5175 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -462,10 +462,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -720,8 +716,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index cb83d07494..fac4a22780 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -472,11 +472,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM - #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ || defined(CONFIG_USB_STORAGE) #define CONFIG_SUPPORT_VFAT @@ -485,10 +480,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) #endif -#ifdef CONFIG_PCI - #define CONFIG_CMD_PCI -#endif - /* Watchdog */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -691,12 +682,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_NETDEV "eth0" -#ifdef CONFIG_MPC8349ITX -#define CONFIG_HOSTNAME "mpc8349emitx" -#else -#define CONFIG_HOSTNAME "mpc8349emitxgp" -#endif - /* Default path and filenames */ #define CONFIG_ROOTPATH "/nfsroot/rootfs" #define CONFIG_BOOTFILE "uImage" @@ -710,16 +695,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define CONFIG_BOOTARGS \ - "root=/dev/nfs rw" \ - " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ - " ip=" __stringify(CONFIG_IPADDR) ":" \ - __stringify(CONFIG_SERVERIP) ":" \ - __stringify(CONFIG_GATEWAYIP) ":" \ - __stringify(CONFIG_NETMASK) ":" \ - CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ - " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE) - #define CONFIG_EXTRA_ENV_SETTINGS \ "console=" __stringify(CONSOLE) "\0" \ "netdev=" CONFIG_NETDEV "\0" \ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index f6afa9dcc9..badb233f7e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -465,10 +465,6 @@ extern int board_pci_host_broken(void); * Command line configuration. */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -640,8 +636,6 @@ extern int board_pci_host_broken(void); #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index d93f7a0074..11bd0c3f95 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -479,10 +479,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 6b9c25f0c9..da127d126f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -578,15 +578,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_MMC @@ -660,8 +651,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index ca4ccd8ad3..e0ff8e151b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -314,10 +314,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -373,8 +369,6 @@ #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 977454167d..f13926fdd3 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -338,15 +338,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -400,8 +391,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 12bcb02e5f..e8a6fdf23f 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -343,15 +343,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTP_HOSTNAME /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -/* * USB */ @@ -414,8 +405,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index c18bf6744d..20251fd888 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -456,15 +456,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -518,8 +509,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ecc=off\0" \ "netdev=eth0\0" \ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index d31395cf81..3db0cafb06 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -336,15 +336,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -396,8 +387,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2e13fb52df..c03e53f66e 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -349,18 +349,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_ETHER_ON_FCC) -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -415,8 +403,6 @@ #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyCPM\0" \ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index c0af7451b8..9be25a99cb 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -351,15 +351,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -414,8 +405,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 716bb069b3..1e6e94e4a6 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -443,15 +443,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_MMC @@ -503,8 +494,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 49c6e7fdee..1959fa5b01 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -541,15 +541,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* * USB */ @@ -613,8 +604,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0" \ "netdev=eth0\0" \ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 5e8211609a..92db95a97e 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -262,8 +262,6 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_CMD_REGINFO - #define CONFIG_ULI526X #ifdef CONFIG_ULI526X #endif @@ -426,10 +424,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - #define CONFIG_WATCHDOG /* watchdog enabled */ #define CONFIG_SYS_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ @@ -479,8 +473,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 0x10000000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #if defined(CONFIG_PCI1) #define PCI_ENV \ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 7b9b2458b3..94483b5fa1 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -582,15 +582,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -645,8 +636,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 0x10000000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 73b0e6e05a..1c4eb1cea5 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -12,10 +12,6 @@ #define CONFIG_CPU_SH7722 1 #define CONFIG_MIGO_R 1 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 2dee5ac01c..c19339b86a 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -140,8 +140,6 @@ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_CMD_PCI - /* * PCI Windows * Memory space is mapped 1-1, but I/O space must start from 0. @@ -711,11 +709,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - #undef CONFIG_WATCHDOG /* watchdog disabled */ #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \ @@ -769,8 +762,6 @@ extern unsigned long get_sdram_size(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ "netdev=eth0\0" \ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 0fab00f069..8c83f2d34b 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -581,15 +581,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 3cc5033954..1e41035354 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -237,15 +237,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index ef7563d415..64698177c1 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -570,10 +570,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); * Command line configuration. */ -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - /* * USB */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 767cd229a8..d58af7b843 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -768,15 +768,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 9c575a9b96..c94b837ce4 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -779,15 +779,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 8bf32cd9f3..98cee8a600 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -647,15 +647,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 49e88b23c8..a54e17c349 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -762,15 +762,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index f6b8f0b4dc..c1c3fa13d8 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -733,15 +733,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 6ab7a126cc..803d8fbe5f 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -679,15 +679,6 @@ unsigned long get_board_ddr_clk(void); */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 4a2ed6a407..fee8b8fe45 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -56,8 +56,6 @@ #define CONFIG_DDR_ECC -#define CONFIG_CMD_REGINFO - /* High Level Configuration Options */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MP /* support multiple processors */ @@ -271,10 +269,6 @@ * Command line configuration. */ -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index c216ac2d47..45c54a0111 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -213,11 +213,6 @@ #endif /* CONFIG_TSEC_ENET */ -/* - * General PCI - * Addresses are mapped 1-1. - */ - #if defined(CONFIG_PCI) #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ @@ -270,13 +265,6 @@ #define CONFIG_BOOTP_HOSTNAME /* - * Command line configuration. - */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -462,14 +450,10 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 400000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" -#undef CONFIG_BOOTARGS - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=tqm834x\0" \ diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 56c1f2878d..293496b256 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -352,8 +352,6 @@ #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_CMD_PCI - #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ @@ -413,11 +411,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB @@ -437,7 +430,6 @@ #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_MMC_SPI -#define CONFIG_CMD_MMC_SPI #endif /* Misc Extra Settings */ @@ -514,8 +506,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTARGS /* the boot command will set bootargs */ - #if defined(CONFIG_DONGLE) #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h index 6d40eb4854..6329bf69c1 100644 --- a/include/configs/advantech_dms-ba16.h +++ b/include/configs/advantech_dms-ba16.h @@ -268,7 +268,6 @@ #define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66000000 -#undef CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index fbab610d7a..c9420b2d73 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -191,8 +191,6 @@ #define CONFIG_SYS_BOOTCOUNT_BE /* USB gadget RNDIS */ - -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif #ifdef CONFIG_NAND @@ -238,9 +236,7 @@ #define CONFIG_SPL_NAND_AM33XX_BCH #endif #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* !CONFIG_NAND */ diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h index 3d3d5e730b..9b14603918 100644 --- a/include/configs/am335x_igep003x.h +++ b/include/configs/am335x_igep003x.h @@ -14,7 +14,6 @@ #ifndef __CONFIG_IGEP003X_H #define __CONFIG_IGEP003X_H -#define CONFIG_NAND #include <configs/ti_am335x_common.h> /* Clock defines */ @@ -124,7 +123,6 @@ #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(SPL),-(UBI)" /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* UBI configuration */ #define CONFIG_SPL_UBI 1 diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 121beef679..62ab2d7227 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -19,7 +19,6 @@ #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #undef CONFIG_CMD_EXT4 #undef CONFIG_CMD_EXT4_WRITE -#undef CONFIG_CMD_MMC_SPI #undef CONFIG_CMD_SPI #define CONFIG_CMD_CACHE @@ -247,8 +246,6 @@ /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifndef CONFIG_SPL_USBETH_SUPPORT #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 #endif diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h index 13ff2b277a..62af3fa9ff 100644 --- a/include/configs/am335x_sl50.h +++ b/include/configs/am335x_sl50.h @@ -78,8 +78,6 @@ #define CONFIG_BOOTCOUNT_AM33XX #define CONFIG_SYS_BOOTCOUNT_BE -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifndef CONFIG_SPL_USBETH_SUPPORT #define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 #endif diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index aeba61ea59..0502b567e6 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -257,7 +257,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 60460c8105..e957a28b6b 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -305,6 +305,5 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* __CONFIG_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 4f3b605a96..b84f6e3480 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -71,8 +71,6 @@ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - /* SPL USB Support */ #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) @@ -142,7 +140,6 @@ #endif /* SPI */ -#undef CONFIG_OMAP3_SPI #define CONFIG_TI_SPI_MMAP #define CONFIG_QSPI_SEL_GPIO 48 #define CONFIG_SF_DEFAULT_SPEED 48000000 @@ -307,9 +304,7 @@ #endif /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #endif #define NANDARGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 9f07bba0c8..0c70c53050 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 /* SPI */ -#undef CONFIG_OMAP3_SPI #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 76800000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 0a40746112..5f8b6c5518 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -93,8 +93,8 @@ #define CONFIG_ENV_SECT_SIZE 0x1000 #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text*); /* memory map space for linux boot data */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) diff --git a/include/configs/ap121.h b/include/configs/ap121.h index 489b32e6d1..860f38509d 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -27,9 +27,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200} -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock2 " \ - "rootfstype=squashfs" #define CONFIG_BOOTCOMMAND "sf probe;" \ "mtdparts default;" \ "bootm 0x9f650000" diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 3e93a08fe3..068007eb35 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -31,9 +31,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200} -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock2 " \ - "rootfstype=squashfs" #define CONFIG_BOOTCOMMAND "sf probe;" \ "mtdparts default;" \ "bootm 0x9f680000" diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 448c9279a9..9c234fbc08 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -13,10 +13,6 @@ #define CONFIG_CPU_SH7723 1 #define CONFIG_AP325RXA 1 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC2,38400" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index cbf7782267..0105a660d5 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -16,10 +16,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8BFC0000 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC4,115200" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index d6b226c425..f750d5fbf9 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -39,7 +39,6 @@ /* PCI host support */ #undef CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI /* PCI networking support */ #define CONFIG_E1000_NO_NVM diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index daa3be0999..c814c73b40 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -35,7 +35,6 @@ #define CONFIG_USB_EHCI_TEGRA /* PCI host support */ -#define CONFIG_CMD_PCI /* PCI networking support */ #define CONFIG_E1000_NO_NVM diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 29cbbabd1e..12bb0855a8 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -27,7 +27,6 @@ * SPL */ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_TEXT_BASE 0xA0000000 @@ -123,9 +122,6 @@ #define CONFIG_INITRD_TAG /* send initrd params */ #define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" -#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \ - __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \ - " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs " #define ACFG_CONSOLE_DEV ttySMX0 #define CONFIG_BOOTCOMMAND "run ubifsboot" diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 3b8a250f87..7ed530e766 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -16,12 +16,8 @@ #include <asm/arch/rmobile.h> -#define CONFIG_CMD_SDRAM - #define BOARD_LATE_INIT -#define CONFIG_BOOTARGS "" - #undef CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h index f786ffae3e..2226b9802c 100644 --- a/include/configs/aspeed-common.h +++ b/include/configs/aspeed-common.h @@ -65,10 +65,6 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_BOOTARGS \ - "console=ttyS4,115200n8" \ - " root=/dev/ram rw" - #define CONFIG_BOOTCOMMAND "bootm 20080000 20300000" #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 7e373a2ca4..563732a5c4 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -173,10 +173,6 @@ #endif #endif -/* default bootargs that are considered during boot */ -#define CONFIG_BOOTARGS " console=ttyS2,115200 rootfstype=romfs"\ - " loaderversion=$loaderversion" - /* default RAM address for user programs */ #define CONFIG_SYS_LOAD_ADDR 0x20000 @@ -300,7 +296,7 @@ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*) + env/embedded.o(.text*) #if ENABLE_JFFS /* JFFS Partition offset set */ diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 95df724fa3..108842f956 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -62,16 +62,8 @@ "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ "fatload mmc 0:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" + #else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" #ifdef CONFIG_SYS_USE_NANDFLASH /* u-boot env in nand flash */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 8238dcc78f..92add6219f 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -129,10 +129,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0:0; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" #elif CONFIG_SYS_USE_DATAFLASH_CS1 @@ -143,10 +139,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0:1; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" #elif defined(CONFIG_SYS_USE_NANDFLASH) @@ -155,12 +147,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ @@ -171,12 +157,6 @@ #define CONFIG_BOOTCOMMAND \ "fatload mmc 0:1 0x22000000 uImage; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" #endif #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 23007528ea..a6d37515a1 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -115,10 +115,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" #elif CONFIG_SYS_USE_DATAFLASH_CS3 @@ -130,10 +126,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0:3; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" #else /* CONFIG_SYS_USE_NANDFLASH */ @@ -142,12 +134,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index e0abaa75a9..24ff6b5ea5 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -242,10 +242,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) "\ - "rw rootfstype=jffs2" #elif CONFIG_SYS_USE_NANDFLASH @@ -254,12 +250,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 019006a84a..2ce58e13ba 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -91,20 +91,10 @@ #define CONFIG_BOOTCOMMAND \ "nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env + linux in mmc */ #define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 rw rootwait" #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ "fatload mmc 0:1 0x72000000 zImage; " \ "bootz 0x72000000 - 0x71000000" @@ -136,7 +126,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index db04662799..089b865ac2 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -189,7 +189,6 @@ #define CONFIG_SYS_MCKR_CSS 0x1302 #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index d34b4abbde..2ed4ea87fc 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -87,10 +87,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) "\ - "rw rootfstype=jffs2" #elif CONFIG_SYS_USE_NANDFLASH @@ -101,12 +97,6 @@ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \ "nand read 0x21000000 0x180000 0x80000; " \ "bootz 0x22000000 - 0x21000000" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" #else /* CONFIG_SYS_USE_MMC */ @@ -115,10 +105,6 @@ #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \ "fatload mmc 0:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 rw rootwait" #endif #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 608be149a0..eeb29763c9 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -135,21 +135,6 @@ #define CONFIG_ENV_SIZE 0x4000 #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 " \ - "rw rootfstype=ext4 rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw" -#endif - #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_LONGHELP @@ -180,7 +165,6 @@ #define CONFIG_SYS_MCKR_CSS 0x1302 #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index e1a30b7e71..8f516eaa4f 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -75,7 +75,6 @@ * Environment configuration */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS3,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR /* diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 598352b3ce..185c749d78 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -45,9 +45,7 @@ #ifdef CONFIG_NAND #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00080000 #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #define NANDARGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ @@ -243,8 +241,6 @@ /* General network SPL, both CPSW and USB gadget RNDIS */ #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"*/ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifdef CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_GPMC_PREFETCH diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 6beb347a8b..c824ebde27 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -344,8 +344,6 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_SYS_BOOTCOUNT_BE /* USB gadget RNDIS */ - -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif #ifdef CONFIG_NAND @@ -395,9 +393,7 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_SPL_NAND_AM33XX_BCH #endif #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* !CONFIG_NAND */ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 6afa1e8c04..2385173a6a 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -45,7 +45,6 @@ #define CONFIG_USB_ETHER_ASIX /* PCI host support */ -#define CONFIG_CMD_PCI /* General networking support */ diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index b47a0260ac..3b65416dcf 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -47,7 +47,6 @@ /* Boot Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyAMA0,115200" #define CONFIG_BOOTCOMMAND "bootm" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/boston.h b/include/configs/boston.h index 2646cf09ed..86dd0433c8 100644 --- a/include/configs/boston.h +++ b/include/configs/boston.h @@ -20,7 +20,6 @@ /* * PCI */ -#define CONFIG_CMD_PCI /* * Memory map diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 9688c4a776..07a173ff14 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -66,9 +66,7 @@ /* NAND */ #ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* CONFIG_NAND */ #endif /* CONFIG_SPL_OS_BOOT */ @@ -236,7 +234,6 @@ MMCARGS #if defined(CONFIG_SPI_BOOT) /* McSPI IP block */ #define CONFIG_SPI -#define CONFIG_OMAP3_SPI #define CONFIG_SF_DEFAULT_SPEED 24000000 #define CONFIG_SPL_SPI_LOAD diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index f545a56d82..15c481d421 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -102,6 +102,5 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN /* General parts of the framework, required. */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* ! __BUR_AM335X_COMMON_H__ */ diff --git a/include/configs/calimain.h b/include/configs/calimain.h index b6c8035fb5..06554c101b 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -204,7 +204,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "" #define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;" #define CONFIG_BOOT_RETRY_TIME 60 /* continue boot after 60 s inactivity */ #define CONFIG_RESET_TO_RETRY @@ -294,14 +293,6 @@ "echo Product: $product; " \ "gpio c 1; gpio c 2;" -/* - * U-Boot commands - */ -#define CONFIG_CMD_SAVES - -#ifndef CONFIG_DRIVER_TI_EMAC -#endif - /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 /* initial stack pointer in internal SRAM */ diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index a490d06619..834bab073c 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -49,7 +49,6 @@ #define CONFIG_USB_ETHER_ASIX /* PCI host support */ -#define CONFIG_CMD_PCI /* General networking support */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 768669ff12..4bb0f9e094 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -44,7 +44,6 @@ #define CONFIG_USB_ETHER_ASIX /* PCI host support */ -#define CONFIG_CMD_PCI /* General networking support */ diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 581ab7cd50..fb3e67466e 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_CHILIBOARD_H #define __CONFIG_CHILIBOARD_H -#define CONFIG_NAND - #include <configs/ti_am335x_common.h> #define CONFIG_CONS_INDEX 1 @@ -129,8 +127,6 @@ #define CONFIG_BOOTCOUNT_AM33XX #define CONFIG_SYS_BOOTCOUNT_BE -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - /* NAND: device related configs */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h index 4010354edf..3aaa82ce51 100644 --- a/include/configs/cl-som-am57x.h +++ b/include/configs/cl-som-am57x.h @@ -29,8 +29,6 @@ #define CONFIG_SYS_SPD_BUS_NUM 3 /* SPI Flash support */ -#undef CONFIG_OMAP3_SPI - #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 @@ -64,7 +62,6 @@ #ifndef CONFIG_SPL_BUILD /* SATA */ -#define CONFIG_CMD_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT @@ -74,8 +71,6 @@ CONFIG_SYS_SCSI_MAX_LUN) /* PCA9555 GPIO expander support */ #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO #define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index bd80222149..5061f6c6fd 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -24,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_PCI /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 6bcc63ab0c..2287d5b6e4 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -12,12 +12,10 @@ #define __CONFIG_CM_T335_H #define CONFIG_CM_T335 -#define CONFIG_NAND #include <configs/ti_am335x_common.h> #undef CONFIG_SPI -#undef CONFIG_OMAP3_SPI #undef CONFIG_BOOTCOUNT_LIMIT #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC @@ -99,7 +97,6 @@ #define CONFIG_SYS_I2C_EEPROM_BUS 0 /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* Network. */ #define CONFIG_PHY_ATHEROS @@ -137,9 +134,7 @@ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_NAND_ONFI_DETECTION #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x400000 /* un-assigned: (using dtb) */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* GPIO pin + bank to pin ID mapping */ @@ -161,8 +156,6 @@ * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command. */ #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO #define CONFIG_SYS_I2C_PCA953X_ADDR 0x26 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} } #endif /* CONFIG_SPL_BUILD */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index f8f3c9224c..a94d55fa3a 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -248,8 +248,6 @@ #define CONFIG_BMP_16BPP #define CONFIG_SCF0403_LCD -#define CONFIG_OMAP3_SPI - /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE @@ -261,7 +259,6 @@ #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 5821183fc9..3a9fd2ac6c 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -249,8 +249,6 @@ #define CONFIG_BMP_16BPP #define CONFIG_SCF0403_LCD -#define CONFIG_OMAP3_SPI - /* EEPROM */ #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 4c261f8e74..bbc455a244 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -25,7 +25,6 @@ #endif /* NAND support */ -#define CONFIG_NAND #define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_5_ADDR_CYCLE @@ -98,8 +97,6 @@ #define CONFIG_ENV_OFFSET (768 * 1024) #define CONFIG_ENV_SPI_MAX_HZ 48000000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x81200000\0" \ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index a3b7b219b3..9adf7a35f0 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -102,8 +102,8 @@ #endif #define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text); + . = DEFINED(env_offset) ? env_offset : .; \ + env/embedded.o(.text); /* * BOOTP options @@ -155,9 +155,6 @@ u-boot: 'set' command */ #define CONFIG_BOOTCOMMAND "bootm 0xffe80000" /*Autoboto command, please enter a valid image address in flash */ -#define CONFIG_BOOTARGS " " /* default bootargs that are -considered during boot */ - /* User network settings */ #define CONFIG_IPADDR 192.168.100.2 /* default board IP address */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 4be06f1914..326fececd7 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -39,7 +39,6 @@ "bootm 0xa0000000; " \ "fi; " \ "bootm 0xc0000;" -#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h index 0c3740745b..4bf3dc5c4c 100644 --- a/include/configs/conga-qeval20-qa3-e3845.h +++ b/include/configs/conga-qeval20-qa3-e3845.h @@ -25,11 +25,7 @@ #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_OFFSET 0x006ef000 -#undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTARGS \ - "root=/dev/sda2 ro quiet" #define CONFIG_BOOTCOMMAND \ "load scsi 0:2 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ "load scsi 0:2 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 08def6251a..52be713af4 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -220,7 +220,6 @@ #define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_CMD_PCI #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ @@ -334,9 +333,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #ifndef CONFIG_TRAILBLAZER - -#define CONFIG_CMD_REGINFO - /* * Board initialisation callbacks */ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 021150ed61..715e9ed9c9 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -33,8 +33,6 @@ * Commands configuration */ #define CONFIG_CMD_I2C -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SCSI #define CONFIG_CMD_SPI /* SPI NOR flash default params, used by sf commands */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 668dd060a7..1d4524e05a 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -580,15 +580,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 881960200b..e47f06bda3 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -105,12 +105,6 @@ #define CONFIG_BOOTCOMMAND \ "nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index cdabbac561..52895865ba 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -404,15 +404,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 695f3f6874..0736b395ae 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -259,15 +259,8 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" #define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes" -/* - * U-Boot commands - */ -#define CONFIG_CMD_SAVES - #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif @@ -296,7 +289,6 @@ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index 864222955f..b0e988d234 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -24,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_PCI /* SPI NOR flash default params, used by sf commands */ #define CONFIG_SF_DEFAULT_BUS 1 diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 4a9d2f75bf..44fd968d3b 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -24,7 +24,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_PCI /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index 7174f6b40e..4a5be6188f 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -22,11 +22,6 @@ #define CONFIG_SYS_TEXT_BASE 0x00800000 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ -#define CONFIG_CMD_PCI - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 970e214e07..ce91f10932 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -38,7 +38,6 @@ /* valid baudrates */ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "addmisc=setenv bootargs ${bootargs} " \ @@ -67,11 +66,6 @@ * Command line configuration. */ -#ifdef CONFIG_DBAU1550 - -#undef CONFIG_CMD_PCMCIA -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 6124867c6e..226c1d2bba 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -165,7 +165,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS0,115200n8" #define CONFIG_LOADADDR 0x80008000 /* diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5b249d1f67..2bf0983e37 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -32,8 +32,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#define CONFIG_NAND - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ @@ -62,7 +60,6 @@ /* SPI */ #undef CONFIG_SPI -#undef CONFIG_OMAP3_SPI /* I2C */ @@ -209,9 +206,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000 /* SPL OS boot options */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ -#define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ - 0x400000) #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 #undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR diff --git a/include/configs/dfi-bt700.h b/include/configs/dfi-bt700.h index 949a581e0d..f7bd4a4ff8 100644 --- a/include/configs/dfi-bt700.h +++ b/include/configs/dfi-bt700.h @@ -36,11 +36,7 @@ #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_OFFSET 0x006ef000 -#undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTARGS \ - "root=/dev/sda1 ro quiet" #define CONFIG_BOOTCOMMAND \ "load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ "load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 1a58c6ef24..efe63daf26 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -115,7 +115,6 @@ #define CONFIG_PHY_TI /* SPI */ -#undef CONFIG_OMAP3_SPI #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 76800000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 @@ -209,9 +208,7 @@ #endif /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* !CONFIG_NAND */ diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index d9dc639aeb..26103583ab 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -49,7 +49,6 @@ /* Enable that for switching of boot partitions */ /* Disabled by default as some sub-commands can brick eMMC */ /*#define CONFIG_SUPPORT_EMMC_BOOT */ -#define CONFIG_CMD_TFTP /* Partition table support */ #define HAVE_BLOCK_DEVICE /* Needed for partition commands */ @@ -59,9 +58,6 @@ /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -/* Environment - Boot*/ -#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8" - #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index c1e9346290..225d198229 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -48,8 +48,6 @@ /* PCIe support */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM #define CONFIG_PCI_MVEBU #define CONFIG_PCI_SCAN_SHOW #endif @@ -126,7 +124,6 @@ /* Default Environment */ #define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200" #define CONFIG_LOADADDR 0x80000 #undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */ #define CONFIG_PREBOOT "usb start; sf probe" diff --git a/include/configs/ea20.h b/include/configs/ea20.h index b1c4e3a750..158eea6018 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -121,11 +121,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -/* - * U-Boot commands - */ -#define CONFIG_CMD_SAVES - #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index fe56c8f22e..86fcea190b 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -28,10 +28,6 @@ #define CONFIG_ECOVEC_ROMIMAGE_ADDR 0xA0040000 #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC0,115200" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 92842e1e18..9170a94e36 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -29,7 +29,6 @@ #define CONFIG_CMDLINE_TAG 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp" #define CONFIG_BOOTFILE "edb93xx.img" #define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds" diff --git a/include/configs/edison.h b/include/configs/edison.h index 03aa702306..399fbc7d9c 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -10,7 +10,6 @@ #include <asm/ibmpc.h> /* Boot */ -#define CONFIG_CMD_ZBOOT #define CONFIG_BOOTCOMMAND "run bootcmd" /* DISK Partition support */ @@ -43,7 +42,6 @@ #define CONFIG_SYS_MEMTEST_END 0x01000000 /* Environment */ -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 0 #define CONFIG_ENV_SIZE (64 * 1024) diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 31364c2533..235b7461f5 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -24,7 +24,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE 0x0001ffff #define CONFIG_SYS_SPL_MALLOC_START 0x00040000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/orion5x/u-boot-spl.lds" #define CONFIG_SYS_UBOOT_BASE 0xfff90000 #define CONFIG_SYS_UBOOT_START 0x00800000 #define CONFIG_SYS_TEXT_BASE 0x00800000 diff --git a/include/configs/efi-x86.h b/include/configs/efi-x86.h index 4a6b66507f..fa263632a2 100644 --- a/include/configs/efi-x86.h +++ b/include/configs/efi-x86.h @@ -9,8 +9,6 @@ #include <configs/x86-common.h> -#undef CONFIG_CMD_SF_TEST - #undef CONFIG_TPM_TIS_BASE_ADDRESS #undef CONFIG_SCSI_AHCI diff --git a/include/configs/espt.h b/include/configs/espt.h index b9538f35d8..778e672332 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -14,12 +14,6 @@ #define CONFIG_ESPT 1 #define __LITTLE_ENDIAN 1 -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 756b1d6da0..ecd35e9e0f 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -61,8 +61,6 @@ #define CONFIG_ENV_SPI_MAX_HZ 15000000 #ifndef MINIMAL_LOADER -#define CONFIG_CMD_REISER -#define CONFIG_CMD_SAVES #endif /* NAND flash */ @@ -166,12 +164,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0:0; " \ "sf read 0x22000000 0xc6000 0x294000; " \ "bootm 0x22000000" -#if defined(CONFIG_CMD_NAND) -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - MTDPARTS_DEFAULT \ - " rw rootfstype=jffs2" -#endif /* Misc. u-boot settings */ #define CONFIG_SYS_CBSIZE 256 diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index c995f35b73..94fd3b36f6 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -20,10 +20,7 @@ /* SD/MMC configuration */ #define CONFIG_MMC_DEFAULT_DEV 0 -#undef CONFIG_CMD_ONENAND - /* TIZEN THOR downloader support */ -#define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 3b73bbc525..c90cc329ac 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -17,7 +17,6 @@ #ifdef FTRACE #define CONFIG_TRACE -#define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) #define CONFIG_TRACE_EARLY_SIZE (8 << 20) #define CONFIG_TRACE_EARLY @@ -49,7 +48,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT /* specific .lds file */ -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" /* Boot Argument Buffer Size */ /* memtest works on */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index cc2b78677c..d090cddd24 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -298,7 +298,6 @@ #define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66000000 -#undef CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index bddebde042..aeacd46f33 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -12,12 +12,9 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M) /* Falcon Mode */ -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - NAND support: args@17MB kernel@18MB */ -#define CONFIG_CMD_SPL_NAND_OFS (17 * SZ_1M) #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M) /* Falcon Mode - MMC support: args@1MB kernel@2MB */ @@ -116,7 +113,6 @@ /* * PCI express */ -#define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCI_FIXUP_DEV diff --git a/include/configs/h2200.h b/include/configs/h2200.h index fea4044769..def9e21cf0 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -121,8 +121,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" - #define CONFIG_USB_DEV_PULLUP_GPIO 33 /* USB VBUS GPIO 3 */ diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 093badb88b..f12f13c836 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -86,9 +86,6 @@ * Defines where the kernel and FDT will be put in RAM */ -/* Assume we boot with root on the seventh partition of eMMC */ -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw" - #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index c5b6fddee7..565a5aae93 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -509,7 +509,6 @@ void fpga_control_clear(unsigned int bus, int pin); /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index 32f649dd34..3a90eeaa05 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -65,7 +65,6 @@ * Environment configuration */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS0,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR /* diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index e2f7217ff6..0c22ca8b9e 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -466,7 +466,6 @@ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run nfsboot\\\" " \ "to mount root filesystem over NFS;echo" -#undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND "run boot_cramfs" #undef CONFIG_SYS_LOADS_BAUD_CHANGE diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 9537112693..cdb3a374bc 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -24,7 +24,6 @@ * and some padding thus 'our' max size is really 0x00908000 - 0x00918000 * or 64KB */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_STACK 0x0091FFB8 diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index ae8399426f..ceb909624d 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -31,7 +31,6 @@ /* * Command line configuration. */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" #define CONFIG_BOOTCOMMAND "" /* Flash settings */ @@ -43,8 +42,6 @@ * PCI definitions */ -#define CONFIG_CMD_PCI - #define CONFIG_TULIP #define CONFIG_EEPRO100 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 8c9ad6c183..b1f98ee050 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -31,7 +31,6 @@ /* * Command line configuration. */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index a21261f4d5..d2fc81bfe0 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -236,11 +236,6 @@ "nand write c0000100 180000 20000\0" \ "\0" -/* - * U-Boot commands - */ -#define CONFIG_CMD_SAVES - #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif @@ -266,7 +261,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_SIZE 0x20000 @@ -279,11 +273,8 @@ GENERATED_GBL_DATA_SIZE) /* add FALCON boot mode */ -#define CONFIG_CMD_SPL #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 #define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR -#define CONFIG_CMD_SPL_NAND_OFS 0x00180000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* GPIO support */ #define CONFIG_DA8XX_GPIO diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index acc97268ba..b35f358ed2 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -40,7 +40,6 @@ #define CONFIG_USB_ETHER_ASIX /* PCI host support */ -#define CONFIG_CMD_PCI /* General networking support */ diff --git a/include/configs/kc1.h b/include/configs/kc1.h index 38c5862b72..36c01c0e05 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -88,8 +88,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - /* * Console */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 1e33328f41..8e827d006d 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -12,8 +12,6 @@ #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 0bd42799f1..810b23e8fa 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -219,10 +219,6 @@ #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE #endif -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index be4a2d0191..0727106f26 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -365,7 +365,6 @@ int get_scl(void); /* * additionnal command line configuration. */ -#define CONFIG_CMD_PCI /* we don't need flash support */ #undef CONFIG_FLASH_CFI_MTD diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 6f60c7c2c3..4daeb49e96 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -23,8 +23,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_BOOTARGS "root=/dev/null console=ttySC4,115200" - #undef CONFIG_SHOW_BOOT_PROGRESS /* MEMORY */ diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index d5fe7dfa96..41b41077e2 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -144,8 +144,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTARGS "console=ttyS0,115200" - #define CONFIG_BOOTCOMMAND \ "dhcp && run netconsole; " \ "if run usbload || run diskload; then bootm; fi" diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 4ea61af920..2e6147d822 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -197,11 +197,6 @@ "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \ "bootscript=source ${bootscraddr}\0" \ -/* - * U-Boot commands - */ -#define CONFIG_CMD_SAVES - #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif diff --git a/include/configs/lion_rk3368.h b/include/configs/lion_rk3368.h new file mode 100644 index 0000000000..4118ffd65b --- /dev/null +++ b/include/configs/lion_rk3368.h @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIGS_LION_RK3368_H +#define __CONFIGS_LION_RK3368_H + +#include <configs/rk3368_common.h> + +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define KERNEL_LOAD_ADDR 0x280000 +#define DTB_LOAD_ADDR 0x5600000 +#define INITRD_LOAD_ADDR 0x5bf0000 +#define CONFIG_ENV_SIZE 0x2000 + +#endif diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 74af0b9dc6..9d85341499 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -101,8 +101,6 @@ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" #define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ "$kernel_start $kernel_size && "\ "bootm $kernel_load" diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index bebb0dfce8..7bb65ab4d9 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -115,6 +115,8 @@ #ifdef CONFIG_HAS_FSL_DR_USB #define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -136,7 +138,6 @@ #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI #define CONFIG_SYS_SATA AHCI_BASE_ADDR @@ -149,7 +150,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 32c8cec072..e9edcd2bc9 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -52,7 +52,6 @@ #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_CMD_SCSI #define CONFIG_SYS_SATA AHCI_BASE_ADDR @@ -65,7 +64,6 @@ #define CONFIG_NET_MULTI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 56a0754e13..6ef7d63295 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_FSL_PBL_RCW \ board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT @@ -142,7 +141,6 @@ #define CONFIG_FSL_ESDHC /* SATA */ -#define CONFIG_CMD_SCSI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT @@ -214,7 +212,6 @@ #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif #define CONFIG_CMD_PING diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 56f8c0305a..b934d10b47 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -52,7 +52,6 @@ unsigned long get_board_ddr_clk(void); board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg #endif #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -75,7 +74,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -477,7 +475,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif #define CONFIG_CMDLINE_TAG diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index af499238b4..0fecd54eea 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -95,7 +95,6 @@ board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg #endif #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #ifdef CONFIG_SECURE_BOOT /* @@ -348,7 +347,6 @@ #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif #define CONFIG_CMDLINE_TAG @@ -486,8 +484,6 @@ "&& esbc_halt; run nor_bootcmd;" #endif -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0" - /* * Miscellaneous configurable options */ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 443a6657e6..00af52d411 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -66,7 +66,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x10000000 @@ -98,7 +97,6 @@ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PBL_PAD #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -169,7 +167,6 @@ #ifdef CONFIG_PCI #define CONFIG_NET_MULTI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif #endif @@ -329,10 +326,6 @@ #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \ "&& esbc_halt; run nor_bootcmd;" #endif - -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0500 " \ - MTDPARTS_DEFAULT #endif /* Monitor Command Prompt */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index a4162a61b9..ca1d862479 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -292,7 +292,6 @@ #ifndef SPL_NO_SATA #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI -#define CONFIG_CMD_SCSI #ifndef CONFIG_CMD_EXT2 #define CONFIG_CMD_EXT2 #endif diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 7d7da91a0d..b9221398df 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -64,7 +64,6 @@ /* SD boot SPL */ #ifdef CONFIG_SD_BOOT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -104,7 +103,6 @@ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PBL_PAD #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -145,7 +143,6 @@ #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif /* Command line configuration */ @@ -267,10 +264,6 @@ "sf probe && sf read $load_addr " \ "$kernel_start $kernel_size && bootm $load_addr#$board\0" - -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0500 " \ - MTDPARTS_DEFAULT #endif /* Monitor Command Prompt */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 6ae5586d64..20cfc25cce 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -33,7 +33,7 @@ #define CONFIG_SYS_TEXT_BASE 0x20100000 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x40000 #endif #define CONFIG_SUPPORT_RAW_INITRD @@ -203,10 +203,6 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0500 " \ - "ramdisk_size=0x2000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=256" #ifdef CONFIG_SD_BOOT #define CONFIG_BOOTCOMMAND "mmc read 0x80200000 0x6800 0x800;"\ " fsl_mc apply dpl 0x80200000 &&" \ @@ -233,7 +229,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 0x16000 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 1801eca53f..dcd1b0c35c 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -342,7 +342,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif /* MMC */ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index de67e1d16e..145b285685 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -328,7 +328,6 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_PCI #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_PCI #endif /* MMC */ @@ -457,12 +456,6 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && esbc_halt; " #endif -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0600 " \ - "ramdisk_size=0x2000000 default_hugepagesz=2m" \ - " hugepagesz=2m hugepages=256" - /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET #define CONFIG_PHYLIB_10G diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 8b94412028..7cbbe876b2 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -71,7 +71,6 @@ */ #define CONFIG_LOADADDR 0x00800000 #define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}" -#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2" #if defined(CONFIG_LSXHL) #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb" diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 0a084a5027..4fcf4805ee 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -102,7 +102,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_BOOTCOMMAND "run mmc_mmc" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 2f7efc7511..4dc6e16fac 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -190,7 +190,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttymxc1,115200" #define CONFIG_LOADADDR 0x70800000 #define CONFIG_BOOTCOMMAND "run mmc_mmc" #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index 7c28a94d92..50b21c9d97 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -11,7 +11,6 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #include "at91-sama5_common.h" -#undef CONFIG_BOOTARGS #define CONFIG_SYS_USE_SERIALFLASH 1 #define CONFIG_BOARD_LATE_INIT @@ -113,7 +112,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttyS3,115200" #define CONFIG_LOADADDR 0x20800000 #define CONFIG_BOOTCOMMAND "run mmc_mmc" #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR @@ -214,7 +212,6 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 #define CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/malta.h b/include/configs/malta.h index 8eb6d7a269..b0b9664f57 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -100,7 +100,6 @@ /* * Commands */ -#define CONFIG_CMD_PCI #define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index f25533446c..7047e3f545 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -249,7 +249,6 @@ */ /* **** PISMO SUPPORT *** */ -#define CONFIG_NAND #define CONFIG_SYS_NAND_BUSWIDTH_16BIT #define CONFIG_NAND_OMAP_GPMC #define CONFIG_NAND_OMAP_GPMC_PREFETCH @@ -285,7 +284,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 4f77b8eb9e..e190493c33 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -160,25 +160,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_MFSL - -#if defined(FLASH) -# if !defined(RAMENV) -# define CONFIG_CMD_SAVES -# endif - -#else -#if defined(SPIFLASH) - -# if !defined(RAMENV) -# define CONFIG_CMD_SAVES -# endif -#endif -#endif - #if defined(CONFIG_CMD_JFFS2) # define CONFIG_MTD_PARTITIONS #endif @@ -210,7 +191,6 @@ /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0 -#define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME XILINX_BOARD_NAME #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" @@ -252,11 +232,8 @@ #endif /* SPL part */ -#define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" - #ifdef CONFIG_SYS_FLASH_BASE # define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #endif diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index cd5971d30c..755e05deda 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -382,7 +382,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 30395d5b7e..edaca0e1c5 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -13,7 +13,6 @@ /* Supported commands */ /* Default environment variables */ -#define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_BOOTFILE "/boot/zImage" #define CONFIG_LOADADDR 0x8E000000 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 86b93a39bb..cc3217b82e 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -12,10 +12,6 @@ #define CONFIG_CPU_SH7720 1 #define CONFIG_MS7720SE 1 -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_PCMCIA - -#define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_BOOTFILE "/boot/zImage" #define CONFIG_LOADADDR 0x8E000000 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 49eadd10e9..2fec968c77 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -12,10 +12,6 @@ #define CONFIG_CPU_SH7722 1 #define CONFIG_MS7722SE 1 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 497b8c785f..5410cbba0d 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -22,7 +22,6 @@ */ #define CONFIG_CONS_SCIF1 1 -#define CONFIG_BOOTARGS "console=ttySC0,38400" #define CONFIG_ENV_OVERWRITE 1 /* SDRAM */ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index d93a15f691..633218cd94 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -126,7 +126,6 @@ */ #ifdef CONFIG_PCIE_DW_MVEBU #define CONFIG_E1000 -#define CONFIG_CMD_PCI #endif #endif /* _CONFIG_MVEBU_ARMADA_8K_H */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 3b776b1d9f..2bb24a1545 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -26,7 +26,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_TEXT_BASE 0x87dc0000 diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index bd178a4a87..03ab812a32 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -34,9 +34,7 @@ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - MMC support: args@1MB kernel@2MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h index 27e767241f..5410881fa1 100644 --- a/include/configs/mx6sabresd.h +++ b/include/configs/mx6sabresd.h @@ -24,9 +24,7 @@ /* Falcon Mode */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - MMC support: args@1MB kernel@2MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ @@ -38,7 +36,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ #endif -#define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 2c0a799c7c..36f0ec497e 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -174,7 +174,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif -#define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 041dcde38e..804b9e199c 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -46,7 +46,6 @@ /* SPL */ #define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" /* Memory sizes */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index a06aec1f5f..a072708d61 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -102,13 +102,6 @@ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#ifdef ONENAND_SUPPORT - -#define CONFIG_CMD_ONENAND /* ONENAND support */ - -#endif - -#define CONFIG_OMAP3_SPI #define CONFIG_SYS_I2C #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 diff --git a/include/configs/novena.h b/include/configs/novena.h index c3005e7a15..7c5445d60d 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -17,7 +17,6 @@ #include "mx6_common.h" /* U-Boot Commands */ -#define CONFIG_CMD_PCI /* U-Boot general configurations */ @@ -39,7 +38,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttymxc1,115200 " #define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs" #define CONFIG_HOSTNAME novena diff --git a/include/configs/nsim.h b/include/configs/nsim.h index 4490663020..b51ac6e197 100644 --- a/include/configs/nsim.h +++ b/include/configs/nsim.h @@ -49,7 +49,6 @@ * Environment configuration */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR /* diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 563854d9bb..84e5d0b3ca 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -43,7 +43,6 @@ /* Console configuration */ -#define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run autoboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 697f8d2582..8bc7fbde9e 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -48,7 +48,6 @@ #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D #define CONFIG_USB_FUNCTION_THOR -#define CONFIG_CMD_THOR_DOWNLOAD /* UMS */ #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index a87a75e3cc..33d29b5692 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -255,8 +255,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#define CONFIG_OMAP3_SPI - /* Defines for SPL */ #define CONFIG_SPL_OMAP3_ID_NAND @@ -276,9 +274,7 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 4f8ce54144..560e50081f 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -36,8 +36,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_NAND - #include <configs/ti_omap3_common.h> #define CONFIG_MISC_INIT_R @@ -51,8 +49,6 @@ /* Probe all devices */ #define CONFIG_SYS_I2C_NOPROBES { {0x0, 0x0} } -#define CONFIG_NAND - /* * TWL4030 */ @@ -180,8 +176,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#define CONFIG_OMAP3_SPI - /* Defines for SPL */ #define CONFIG_SPL_OMAP3_ID_NAND @@ -200,9 +194,7 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* env defaults */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index bc859c8811..9930483406 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -14,348 +14,138 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __OMAP3EVM_CONFIG_H -#define __OMAP3EVM_CONFIG_H +#ifndef __CONFIG_H +#define __CONFIG_H -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -/* ---------------------------------------------------------------------------- - * Supported U-Boot features - * ---------------------------------------------------------------------------- - */ -#define CONFIG_SYS_LONGHELP - -/* Allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Add auto-completion support */ -#define CONFIG_AUTO_COMPLETE - -/* ---------------------------------------------------------------------------- - * Supported hardware - * ---------------------------------------------------------------------------- - */ - -/* SPL */ -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -/* Partition tables */ - -/* USB - * - * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard - * Enable CONFIG_USB_MUSB_UDD for Device functionalities. - */ -#define CONFIG_USB_OMAP3 -#define CONFIG_USB_MUSB_HCD -/* #define CONFIG_USB_MUSB_UDC */ - -/* NAND SPL */ -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ - 10, 11, 12, 13} -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 - -/* - * High level configuration options - */ - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -/* - * Clock related definitions - */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* Size of environment - 128KB */ -#define CONFIG_ENV_SIZE (128 << 10) - -/* Size of malloc pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Physical Memory Map - * Note 1: CS1 may or may not be populated - * Note 2: SDRAM size is expected to be at least 32MB - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* Limits for memtest */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/* ----------------------------------------------------------------------------- - * Hardware drivers - * ----------------------------------------------------------------------------- - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#include <configs/ti_omap3_common.h> /* - * PISMO support + * We are only ever GP parts and will utilize all of the "downloaded image" + * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). */ -/* Monitor at start of flash - Reserve 2 sectors */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) - -/* Start location & size of environment */ -#define ONENAND_ENV_OFFSET 0x260000 -#define SMNAND_ENV_OFFSET 0x260000 +#undef CONFIG_SPL_TEXT_BASE +#define CONFIG_SPL_TEXT_BASE 0x40200000 -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -/* - * NAND - */ -/* Physical address to access NAND */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE - -/* Physical address to access NAND at CS0 */ -#define CONFIG_SYS_NAND_BASE NAND_BASE - -/* Max number of NAND devices */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT -/* Timeout values (in ticks) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) - -#define CONFIG_SYS_JFFS2_MEM_NAND -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* Start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -/* Size of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE 0xf980000 - -/* - * USB - */ -#ifdef CONFIG_USB_OMAP3 - -#ifdef CONFIG_USB_MUSB_HCD - -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_USB_MUSB_HCD */ - -#ifdef CONFIG_USB_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE -#define CONFIG_USB_TTY - -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "EVM" -#endif /* CONFIG_USB_MUSB_UDC */ - -#endif /* CONFIG_USB_OMAP3 */ - -/* ---------------------------------------------------------------------------- - * U-Boot features - * ---------------------------------------------------------------------------- - */ -#define CONFIG_SYS_MAXARGS 16 /* max args for a command */ +#define CONFIG_SPL_FRAMEWORK #define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -/* Size of Console IO buffer */ -#define CONFIG_SYS_CBSIZE 512 - -/* Size of print buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Size of bootarg buffer */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_BOOTFILE "uImage" +/* Override OMAP3 serial console configuration */ +#undef CONFIG_CONS_INDEX +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#if defined(CONFIG_SPL_BUILD) +#undef CONFIG_SYS_NS16550_REG_SIZE +#else /* !CONFIG_SPL_BUILD */ +#define CONFIG_SYS_NS16550_REG_SIZE (-1) +#endif /* CONFIG_SPL_BUILD */ -/* - * NAND / OneNAND - */ -#if defined(CONFIG_CMD_NAND) +/* NAND */ +#if defined(CONFIG_NAND) +#define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_FLASH_BASE NAND_BASE +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_BCH +#define CONFIG_SYS_NAND_BUSWIDTH_16BIT +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SPL_OMAP3_ID_NAND +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ +#endif /* CONFIG_NAND */ -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE ONENAND_MAP -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP -#endif +#define CONFIG_USB_OMAP3 -#if !defined(CONFIG_ENV_IS_NOWHERE) -#if defined(CONFIG_CMD_NAND) -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET -#endif -#endif /* CONFIG_ENV_IS_NOWHERE */ +/* MUSB */ +#define CONFIG_USB_MUSB_OMAP2PLUS +#define CONFIG_USB_MUSB_PIO_ONLY +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETHER_RNDIS -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET +/* USB EHCI */ +#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 +/* SMSC911x Ethernet */ #if defined(CONFIG_CMD_NET) - -/* Ethernet (SMSC9115 from SMSC9118 family) */ #define CONFIG_SMC911X #define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -/* BOOTP fields */ -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 - +#define CONFIG_SMC911X_BASE 0x2C000000 #endif /* CONFIG_CMD_NET */ -/* Support for relocation */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* ----------------------------------------------------------------------------- - * Board specific - * ----------------------------------------------------------------------------- - */ - -/* Uncomment to define the board revision statically */ -/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ - -/* Defines for SPL */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* ----------------------------------------------------------------------------- - * Default environment - * ----------------------------------------------------------------------------- - */ +/* Environment */ +#define CONFIG_PREBOOT "usb start" #define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ "mmcdev=0\0" \ "console=ttyO0,115200n8\0" \ "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ + "rootfstype=ext4 rootwait\0" \ "nandargs=setenv bootargs console=${console} " \ - "root=/dev/mtdblock4 rw " \ - "rootfstype=jffs2\0" \ + "${optargs} " \ + "root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd " \ + "rootfstype=ubifs rootwait\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ + "loaduimage=setenv bootfile uImage; " \ + "fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "loadzimage=setenv bootfile zImage; " \ + "fatload mmc ${mmcdev} ${loadaddr} zImage\0" \ + "loaddtb=fatload mmc ${mmcdev} ${fdtaddr} omap3-evm.dtb\0" \ + "mmcboot=echo Booting ${bootfile} from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "mmcbootz=echo Booting ${bootfile} from mmc ...; " \ "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + "nandboot=echo Booting uImage from nand ...; " \ "run nandargs; " \ - "onenand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ + "nand read ${loadaddr} kernel; " \ + "nand read ${fdtaddr} dtb; " \ + "bootm ${loadaddr} - ${fdtaddr}\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ + "if run loadzimage && run loaddtb; then " \ + "run mmcbootz; fi; " \ + "if run loaduimage && run loaddtb; then " \ + "run mmcboot; fi; " \ + "run nandboot; " \ "fi; " \ "else run nandboot; fi" -#endif /* __OMAP3EVM_CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 39f1e54544..a029b54804 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -11,7 +11,6 @@ #define __IGEP00X0_H #define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_NAND #include <configs/ti_omap3_common.h> #include <asm/mach-types.h> @@ -52,8 +51,6 @@ #define CONFIG_USBD_MANUFACTURER "Texas Instruments" #define CONFIG_USBD_PRODUCT_NAME "IGEP" -#define CONFIG_CMD_ONENAND - #ifndef CONFIG_SPL_BUILD /* Environment */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index e5ffb85381..5490fc945a 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -263,9 +263,7 @@ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index bc4a59e128..f7dda87ab1 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -8,7 +8,6 @@ #define __CONFIG_H #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define CONFIG_NAND #include <configs/ti_omap3_common.h> /* @@ -217,9 +216,7 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 53c53ef9ff..7f1b571267 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -11,7 +11,6 @@ #define __CONFIG_H #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define CONFIG_NAND /* override base for compatibility with MLO the device ships with */ #define CONFIG_SYS_TEXT_BASE 0x80008000 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 7f4f56f171..c6db88a4a2 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -13,7 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_NAND #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> @@ -57,9 +56,7 @@ #if defined(CONFIG_CMD_NAND) /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif #endif diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 9b650090be..7e2a011843 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -46,7 +46,6 @@ /* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X -#define CONFIG_CMD_TCA642X #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 08e7deb30f..0085559ef9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -274,10 +274,6 @@ "boot_fit=0\0" \ "console=ttyS2,115200n8\0" -/* - * U-Boot commands - */ -#define CONFIG_CMD_SAVES #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS #endif @@ -311,7 +307,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds" #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index 9b96cd0be8..d01898465b 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -85,7 +85,6 @@ #define ACFG_CONSOLE_DEV ttymxc0 #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" -#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," __stringify(CONFIG_BAUDRATE) #define CONFIG_PREBOOT "run check_env" #define CONFIG_BOOTCOMMAND "run emmcboot" diff --git a/include/configs/origen.h b/include/configs/origen.h index c363653537..69f6930c54 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -95,7 +95,6 @@ #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index 8ca6f62850..d4fd722f99 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -31,8 +31,6 @@ #define CONFIG_PCA953X #define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO /* I2C Configs */ #define CONFIG_SYS_I2C diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 5c8277908f..81e7fa4a30 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -686,8 +686,6 @@ #endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_CMD_PCI - #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ @@ -799,11 +797,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB @@ -865,8 +858,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTARGS /* the boot command will set bootargs */ - #ifdef __SW_BOOT_NOR #define __NOR_RST_CMD \ norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \ diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index df0b6082ec..459086e0d4 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -266,8 +266,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_CMD_PCI - #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif /* CONFIG_PCI */ @@ -375,11 +373,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB @@ -433,8 +426,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 3fb62ded1e..afaeea83e8 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -39,7 +39,6 @@ #define CONFIG_USB_ETHER_ASIX /* PCI host support */ -#define CONFIG_CMD_PCI /* General networking support */ diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h index 55230291c2..564069a665 100644 --- a/include/configs/p2771-0000.h +++ b/include/configs/p2771-0000.h @@ -23,7 +23,6 @@ #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) /* PCI host support */ -#define CONFIG_CMD_PCI #include "tegra-common-post.h" diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 85cac5a7b4..369e82f621 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -30,7 +30,6 @@ #endif #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "addmisc=setenv bootargs ${bootargs} " \ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 112f9b8285..f678b2944d 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -117,8 +117,6 @@ /* CPU */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #ifdef CONFIG_SPI_BOOT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index a76bbce9ff..242a13912b 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -11,7 +11,6 @@ #ifndef __CONFIG_PENGWYN_H #define __CONFIG_PENGWYN_H -#define CONFIG_NAND #define CONFIG_SERIAL1 #define CONFIG_CONS_INDEX 1 @@ -163,9 +162,7 @@ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 #endif /* @@ -197,6 +194,4 @@ /* CPSW support */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #endif /* ! __CONFIG_PENGWYN_H */ diff --git a/include/configs/pepper.h b/include/configs/pepper.h index 1a6981a52e..7ef25294c1 100644 --- a/include/configs/pepper.h +++ b/include/configs/pepper.h @@ -81,6 +81,5 @@ #define CONFIG_PHY_RESET_DELAY 1000 /* SPL */ -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #endif /* __CONFIG_PEPPER_H */ diff --git a/include/configs/pfla02.h b/include/configs/pfla02.h new file mode 100644 index 0000000000..be90ce9bff --- /dev/null +++ b/include/configs/pfla02.h @@ -0,0 +1,174 @@ +/* + * Copyright (C) Stefano Babic <sbabic@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + +#ifndef __PCM058_CONFIG_H +#define __PCM058_CONFIG_H + +#include <config_distro_defaults.h> + +#ifdef CONFIG_SPL +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024) +#include "imx6_spl.h" +#endif + +#include "mx6_common.h" + +/* Thermal */ +#define CONFIG_IMX_THERMAL + +/* Serial */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART4_BASE +#define CONSOLE_DEV "ttymxc3" + +/* Early setup */ +#define CONFIG_DISPLAY_BOARDINFO_LATE + + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) + +/* Ethernet */ +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 3 + +/* SPI Flash */ +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 2 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + +/* I2C Configs */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_NAND +/* Enable NAND support */ +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION +#endif + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* Filesystem support */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(nand);" \ + "spi2.0:1024k(bootloader),64k(env1),64k(env2),-(rescue)" + +/* Various command support */ + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* MMC Configs */ +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +/* Environment organization */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_OFFSET (1024 * SZ_1K) +#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (0x1E0000) +#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K) +#endif + +/* Default environment */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off\0" \ + "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \ + "addmtd=run mtdnand;run mtdspi;" \ + "setenv bootargs ${bootargs} ${mtdparts}\0" \ + "mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \ + "40m(Kernels),400m(root),-(nand)\0" \ + "mtdspi=setenv mtdparts ${mtdparts}" \ + "';spi2.0:1024k(bootloader)," \ + "64k(env1),64k(env2),-(rescue)'\0" \ + "bootcmd=if test -n ${rescue};" \ + "then run swupdate;fi;run nandboot;run swupdate\0" \ + "bootfile=uImage\0" \ + "bootimage=uImage\0" \ + "console=ttymxc3\0" \ + "fdt_addr_r=0x18000000\0" \ + "fdt_file=pfla02.dtb\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "miscargs=panic=1 quiet\0" \ + "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \ + "mmcboot=if run mmcload;then " \ + "run mmcargs addcons addmisc;" \ + "bootm;fi\0" \ + "mmcload=mmc rescan;" \ + "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p1\0" \ + "ubiroot=1\0" \ + "nandargs=setenv bootargs ubi.mtd=1 " \ + "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \ + "nandboot=run mtdnand;ubi part nand0,0;" \ + "ubi readvol ${kernel_addr_r} kernel${ubiroot};" \ + "run nandargs addip addcons addmtd addmisc;" \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \ + "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \ + "run nfsargs addip addcons addmtd addmisc;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \ + "run nfsargs addip addcons addmtd addmisc;" \ + "bootm ${kernel_addr_r}\0" \ + "nfsargs=setenv bootargs root=/dev/nfs" \ + " nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \ + "swupdate=setenv bootargs root=/dev/ram;" \ + "run addip addcons addmtd addmisc;" \ + "sf probe;" \ + "sf read ${kernel_addr_r} 120000 600000;" \ + "sf read 14000000 730000 800000;" \ + "bootm ${kernel_addr_r} 14000000\0" + +#endif diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 4e64eac422..3998edaeb0 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -106,8 +106,6 @@ /* bootstrap + u-boot + env + linux in mmc */ #define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mmcblk0p2 rw rootwait" #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" @@ -141,7 +139,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index c4d3d96486..38668defff 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -221,10 +221,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x84000 0x210000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ @@ -233,12 +229,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" #elif defined (CONFIG_SYS_USE_FLASH) @@ -266,7 +256,6 @@ "nand:-(nand)" #define CONFIG_CON_ROT "fbcon=rotate:3 " -#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index f7a5551072..667d68f960 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -250,10 +250,6 @@ #define CONFIG_BOOTCOMMAND "sf probe 0; " \ "sf read 0x22000000 0x84000 0x294000; " \ "bootm 0x22000000" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) "\ - "rw rootfstype=jffs2" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ @@ -262,16 +258,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:" \ - "128k(bootstrap)ro," \ - "256k(uboot)ro," \ - "128k(env1)ro," \ - "128k(env2)ro," \ - "2M(linux)," \ - "-(root) " \ - "rw rootfstype=jffs2" #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ @@ -291,8 +277,6 @@ #define CONFIG_ROOTPATH "/ronetix/rootfs" #define CONFIG_CON_ROT "fbcon=rotate:3 " -#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\ - CONFIG_CON_ROT #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=nand" #define MTDPARTS_DEFAULT \ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 191810fe24..4f7bb0df11 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -118,13 +118,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" -#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \ - "console=ttyS0,115200 " \ - "root=/dev/mtdblock4 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,1664k(env)," \ - "2M(linux)ro,-(root) rw " \ - "rootfstype=jffs2" #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 89d1ad91e0..1151da5a78 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -17,7 +17,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "addmisc=setenv bootargs ${bootargs} " \ diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index a78112d5bc..97fd24eb1f 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -17,7 +17,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ "addmisc=setenv bootargs ${bootargs} " \ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 703d158b8b..e0cc873e06 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -10,8 +10,6 @@ #ifndef __QEMU_PPCE500_H #define __QEMU_PPCE500_H -#define CONFIG_CMD_REGINFO - #undef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */ @@ -126,10 +124,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); * Command line configuration. */ -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 2b04521240..e39fee0db2 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -16,10 +16,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC3,115200" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 7f1f115ff6..19eb73318d 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -8,16 +8,9 @@ #define CONFIG_DISPLAY_BOARDINFO -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SH_ZIMAGEBOOT - /* SCIF */ #define CONFIG_CONS_SCIF1 1 -#define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 /* SDRAM */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 14390e81fb..4f40df9b59 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -17,15 +17,8 @@ #define CONFIG_DISPLAY_BOARDINFO -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_PCI - #define CONFIG_CONS_SCIF0 1 -#define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_TEXT_BASE 0x0FFC0000 diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 16f45f2bea..89ddd00705 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -11,8 +11,6 @@ #include <asm/arch/rmobile.h> -#define CONFIG_CMD_SDRAM - /* Support File sytems */ #define CONFIG_SUPPORT_VFAT #define CONFIG_FS_EXT4 @@ -23,8 +21,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_CMDLINE_EDITING -#define CONFIG_BOOTARGS "" - #undef CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 6c23249861..44d3e9c726 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -12,7 +12,6 @@ #include <asm/arch/rmobile.h> -#define CONFIG_CMD_SDRAM #define CONFIG_CMD_EXT2 #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE @@ -92,10 +91,6 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" -#define CONFIG_BOOTARGS \ - "console=ttySC0,115200 rw root=/dev/nfs " \ - "nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" - #define CONFIG_BOOTCOMMAND \ "tftp 0x48080000 Image; " \ "tftp 0x48000000 Image-"CONFIG_DEFAULT_FDT_FILE"; " \ diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 3ee9abd38d..8a019361be 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -26,7 +26,7 @@ #define CONFIG_SYS_NS16550_MEM32 -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x60000000 once return from SPL */ #define CONFIG_SYS_TEXT_BASE 0x60000000 #else diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 488d67924a..ade6caf624 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -24,7 +24,7 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SYS_NS16550_MEM32 -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x0 once return from SPL */ #define CONFIG_SYS_TEXT_BASE 0x00000000 #else diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index b0c858c693..a89c69a72b 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -21,12 +21,20 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT +#define COUNTER_FREQUENCY 24000000 + +#define CONFIG_SPL_FRAMEWORK #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SYS_TEXT_BASE 0x00200000 #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 #define CONFIG_SYS_LOAD_ADDR 0x00280000 +#define CONFIG_SPL_TEXT_BASE 0x00000000 +#define CONFIG_SPL_MAX_SIZE 0x40000 +#define CONFIG_SPL_BSS_START_ADDR 0x400000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x20000 + #define CONFIG_BOUNCE_BUFFER #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/rock.h b/include/configs/rock.h index e998ec5f03..8d845d95e3 100644 --- a/include/configs/rock.h +++ b/include/configs/rock.h @@ -12,7 +12,7 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) /* SPL @ 32k for 34k * u-boot directly after @ 68k for 400k or so * ENV @ 992k diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h index 29a492dc55..b3986c28af 100644 --- a/include/configs/rockchip-common.h +++ b/include/configs/rockchip-common.h @@ -46,7 +46,7 @@ #endif -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM) /* SPL @ 32k for 34k * u-boot directly after @ 68k for 400k or so * ENV @ 992k diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index 58aadbef01..a478cc88b2 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -13,9 +13,6 @@ #define CONFIG_CPU_SH7203 1 #define CONFIG_RSK7203 1 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index f2e82f7daa..5feaedc70b 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -16,7 +16,6 @@ #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOOTARGS "console=ttySC3,115200" #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h index 5dc87a63d7..76e33c5187 100644 --- a/include/configs/rsk7269.h +++ b/include/configs/rsk7269.h @@ -15,7 +15,6 @@ #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOOTARGS "console=ttySC7,115200" #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/rut.h b/include/configs/rut.h index e676a5acd4..9f9bc718cd 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -120,7 +120,6 @@ #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE #define CONFIG_SPI -#define CONFIG_OMAP3_SPI #define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ #define CONFIG_FORMIKE diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 381082c984..4cfcd5aa7d 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -112,7 +112,6 @@ #endif #define CONFIG_LOADADDR 0xC307FFC0 -#define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" #define CONFIG_EXTRA_ENV_SETTINGS \ "boot_scripts=boot.scr.uimg boot.scr\0" \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 9c00138508..11d244339a 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -51,14 +51,11 @@ /* PWM */ #define CONFIG_PWM 1 -#define CONFIG_CMD_ONENAND - /* USB Composite download gadget - g_dnl */ #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define DFU_DEFAULT_POLL_TIMEOUT 300 /* TIZEN THOR downloader support */ -#define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR /* USB Samsung's IDs */ @@ -114,9 +111,6 @@ #define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}" -#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \ - CONFIG_COMMON_BOOT - #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \ " onenand write 0x32008000 0x0 0x100000\0" diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index b0bc69dab0..9859f30718 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -29,7 +29,6 @@ /* Console configuration */ -#define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run mmcboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" diff --git a/include/configs/sama5d2_ptc.h b/include/configs/sama5d2_ptc.h index ce8904e688..53a3da1eea 100644 --- a/include/configs/sama5d2_ptc.h +++ b/include/configs/sama5d2_ptc.h @@ -88,12 +88,6 @@ "bootz 0x22000000 - 0x21000000" #endif -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTARGS \ - "console=ttyS0,57600 earlyprintk " \ - "mtdparts=atmel_nand:6M(bootstrap)ro, 6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=2 root=ubi0:rootfs" - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000 diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 13d454f18a..9ceb91924d 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -59,9 +59,6 @@ #define CONFIG_BOOTCOMMAND "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \ "fatload mmc 1:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" #endif @@ -77,7 +74,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index cc12521577..05600c81ff 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index d10dc3e2cb..29b7e8b50a 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -118,7 +118,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index f0c80260d0..c8462b0b64 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index ab858cecfa..fc16ed0420 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -74,7 +74,6 @@ #define CONFIG_SYS_MONITOR_LEN (512 << 10) #ifdef CONFIG_SYS_USE_MMC -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index edb153f79e..f7908034d3 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -8,7 +8,6 @@ #ifdef FTRACE #define CONFIG_TRACE -#define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) #define CONFIG_TRACE_EARLY_SIZE (8 << 20) #define CONFIG_TRACE_EARLY @@ -27,8 +26,6 @@ #define CONFIG_LMB #define CONFIG_ANDROID_BOOT_IMAGE -#define CONFIG_CMD_PCI - #define CONFIG_FS_EXT4 #define CONFIG_EXT4_WRITE #define CONFIG_HOST_MAX_DEVICES 4 @@ -54,7 +51,6 @@ #define CONFIG_ENV_SIZE 8192 /* SPI - enable all SPI flash types for testing purposes */ -#define CONFIG_CMD_SF_TEST #define CONFIG_I2C_EDID @@ -96,10 +92,6 @@ #define CONFIG_BOOTP_SERVERIP #define CONFIG_IP_DEFRAG -#define CONFIG_CMD_SANDBOX - -#define CONFIG_BOOTARGS "" - #ifndef SANDBOX_NO_SDL #define CONFIG_SANDBOX_SDL #endif diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h index e55addb99c..250917b1dc 100644 --- a/include/configs/sansa_fuze_plus.h +++ b/include/configs/sansa_fuze_plus.h @@ -23,7 +23,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index c0faac3b79..6de9d204b6 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -398,10 +398,6 @@ * Command line configuration. */ -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -632,8 +628,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 800000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=sbc8349\0" \ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index abac950db4..cbd2f75384 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -506,15 +506,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -565,8 +556,6 @@ #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index c5f9fcb918..8f12de7a85 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -450,12 +450,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -515,8 +509,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index efed670edc..e929a071cb 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -44,7 +44,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyAMA0,115200" #define CONFIG_BOOTCOMMAND "bootm" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index dd3a5fb9df..8db1ac4fa9 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -14,10 +14,6 @@ #define CONFIG_SYS_TEXT_BASE 0x5ff80000 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h index c53cd175fb..4eb8ffba63 100644 --- a/include/configs/sh7753evb.h +++ b/include/configs/sh7753evb.h @@ -14,10 +14,6 @@ #define CONFIG_SYS_TEXT_BASE 0x5ff80000 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index 8ec4cd4430..fe65fbdc64 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -15,10 +15,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8ef80000 -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" - #define CONFIG_DISPLAY_BOARDINFO #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 3876e071e2..acb9f3ca41 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -14,12 +14,6 @@ #define CONFIG_SH7763RDP 1 #define __LITTLE_ENDIAN 1 -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 48a77197fd..7c8707c870 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -12,12 +12,6 @@ #define CONFIG_CPU_SH7785 1 #define CONFIG_SH7785LCR 1 -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SH_ZIMAGEBOOT - -#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp" - #define CONFIG_EXTRA_ENV_SETTINGS \ "bootdevice=0:1\0" \ "usbload=usb reset;usbboot;usb stop;bootm\0" diff --git a/include/configs/shmin.h b/include/configs/shmin.h index d31dc558b1..3755eba167 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -15,10 +15,6 @@ /* T-SH7706LSR*/ /* #define CONFIG_T_SH7706LSR 1 */ -#define CONFIG_CMD_SDRAM - -#define CONFIG_BOOTARGS "console=ttySC0,115200" - /* * This board has original boot loader. If you write u-boot to 0x0, * you should set undef. diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5101d7065e..5ed46588dd 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -72,7 +72,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ #define CONFIG_SPI -#define CONFIG_OMAP3_SPI #define CONFIG_MTD_DEVICE #define CONFIG_SF_DEFAULT_SPEED (75000000) @@ -120,8 +119,6 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_SPL_NAND_AM33XX_BCH #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS @@ -229,7 +226,6 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NAND /* NAND support */ #ifdef CONFIG_NAND /* UBI Support */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index a80d2902b4..fe24b3a160 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -199,9 +199,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x301000 #define CONFIG_SPL_STACK_R #define CONFIG_SPL_STACK_R_ADDR CONFIG_SYS_TEXT_BASE -/* we have only 4k sram in SPL, so cut SYS_MALLOC_F_LEN */ -#undef CONFIG_SYS_MALLOC_F_LEN -#define CONFIG_SYS_MALLOC_F_LEN 0x400 #else /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, @@ -222,7 +219,6 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SYS_USE_NANDFLASH 1 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 3e3575438a..0a9c638b5f 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -56,11 +56,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_ONENAND - #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS @@ -83,9 +78,6 @@ " mem=128M " \ " " MTDPARTS_DEFAULT -#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ubi.mtd=4" \ - " rootfstype=cramfs " CONFIG_COMMON_BOOT - #define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x40000;" \ " onenand write 0x32008000 0x0 0x40000\0" diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 9986a3b707..978fb24f39 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -15,7 +15,6 @@ #undef CONFIG_USB_GADGET_DWC2_OTG #undef CONFIG_USB_GADGET_DWC2_OTG_PHY #undef CONFIG_REVISION_TAG -#undef CONFIG_CMD_THOR_DOWNLOAD /* High Level Configuration Options */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ @@ -79,7 +78,6 @@ #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ #define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) #define CONFIG_SYS_INIT_SP_ADDR 0x02040000 diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 5ec8c1b695..153f68ed57 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -122,7 +122,6 @@ #define CONFIG_ENV_OFFSET (512 << 10) #define CONFIG_ENV_SIZE (256 << 10) #define CONFIG_ENV_OVERWRITE -#define CONFIG_BOOTARGS "console=ttyS0,115200 ip=any" /* Console settings */ #define CONFIG_SYS_CBSIZE 256 @@ -136,8 +135,4 @@ /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -/* Command line configuration */ -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO - #endif /* __CONFIG_H */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 34f6d8ad72..2306e7cdb9 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -85,8 +85,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024) #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h index b30b44d123..83718dd2c9 100644 --- a/include/configs/socfpga_arria10_socdk.h +++ b/include/configs/socfpga_arria10_socdk.h @@ -31,13 +31,6 @@ */ /* - * arguments passed to the bootz command. The value of - * CONFIG_BOOTARGS goes into the environment value "bootargs". - * Do note the value will overide also the chosen node in FDT blob. - */ -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) - -/* * Serial / UART configurations */ #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h index 6d12aedc1d..46f5f135dd 100644 --- a/include/configs/socfpga_is1.h +++ b/include/configs/socfpga_is1.h @@ -16,7 +16,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "zImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index e9c7c71a73..404f064e94 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -15,7 +15,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_PREBOOT "run try_bootscript" #define CONFIG_BOOTCOMMAND "run mmc_mmc" #define CONFIG_LOADADDR 0x01000000 diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index b54097cde7..4977881030 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -15,7 +15,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb" -#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_BOOTCOMMAND "run selboot" #define CONFIG_LOADADDR 0x01000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 5b8fa3a08c..94287c1c31 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -273,16 +273,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -319,8 +309,6 @@ "echo Welcome on the ABB Socrates Board;" \ "echo" -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 49fdf9cdb7..0603db5881 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -93,11 +93,6 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION /* - * Command support defines - */ -#define CONFIG_CMD_SAVES - -/* * Default Environment Varible definitions */ #define CONFIG_ENV_OVERWRITE @@ -144,11 +139,6 @@ "bootm 0x1600000" #endif -#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \ - "mem=128M " \ - "root="CONFIG_FSMTDBLK \ - "rootfstype=jffs2" - #define CONFIG_NFSBOOTCOMMAND \ "bootp; " \ "setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index eaa93a5830..c71413cc53 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -20,9 +20,6 @@ #define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */ -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" - /* Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ "board= B2260" \ diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index c47be514d8..eab79b329b 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -65,8 +65,6 @@ #define CONFIG_SYS_MALLOC_LEN (2 << 20) -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" #define CONFIG_BOOTCOMMAND \ "run bootcmd_romfs" @@ -82,6 +80,4 @@ #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING -#define CONFIG_CMD_MEM - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 3f5ddbc9fa..470722d693 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -53,8 +53,6 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel" #define CONFIG_BOOTCOMMAND \ "run bootcmd_romfs" diff --git a/include/configs/strider.h b/include/configs/strider.h index a702ec71da..c6cb51c36b 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -301,8 +301,6 @@ #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 #define CONFIG_PCA953X /* NXP PCA9554 */ -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x24, 16}, {0x25, 16}, {0x26, 16}, \ {0x3c, 8}, {0x3d, 8}, {0x3e, 8} } @@ -545,7 +543,6 @@ void fpga_control_clear(unsigned int bus, int pin); /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 07c7ffd7f2..212862acd1 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -202,10 +202,6 @@ #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK -#ifndef CONFIG_ARM64 -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" -#endif - #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 99c0602503..bd98cc650e 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -10,8 +10,6 @@ #ifndef __T4QDS_H #define __T4QDS_H -#define CONFIG_CMD_REGINFO - /* High Level Configuration Options */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MP /* support multiple processors */ @@ -240,10 +238,6 @@ * Command line configuration. */ -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 37f876755a..433625105a 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -130,7 +130,6 @@ */ /* **** PISMO SUPPORT *** */ -#define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ @@ -171,7 +170,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ @@ -336,7 +334,7 @@ do { \ else \ strcpy(ethname, "ethaddr"); \ printf("Setting %s from EEPROM with %s\n", ethname, buf);\ - setenv(ethname, buf); \ + env_set(ethname, buf); \ } \ } while (0) diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 1f36ac69be..d47dc8bba9 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -213,8 +213,6 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_OMAP3_SPI - /* * USB * @@ -242,7 +240,6 @@ #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_OMAP3_ID_NAND -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 5a7ef75ae9..55f47f8454 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -143,75 +143,6 @@ #define CONFIG_ENV_SIZE (SZ_128K) /* 1 sector = 128 kB */ #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#if defined(CONFIG_BOARD_TAURUS) -#define CONFIG_BOOTARGS_TAURUS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" -#endif - -#if defined(CONFIG_BOARD_AXM) -#define CONFIG_BOOTARGS_AXM \ - "\0" \ - "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ - "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \ - "addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \ - "baudrate=115200\0" \ - "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0" \ - "boot_retries=0\0" \ - "bootcmd=run flash_self\0" \ - "bootdelay=3\0" \ - "ethact=macb0\0" \ - "flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;"\ - "bootm ${kernel_ram};reset\0" \ - "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \ - "bootm ${kernel_ram};reset\0" \ - "flash_self_test=run nand_kernel;run setbootargs addtest; " \ - "upgrade_available;bootm ${kernel_ram};reset\0" \ - "hostname=systemone\0" \ - "kernel_Off=0x00200000\0" \ - "kernel_Off_fallback=0x03800000\0" \ - "kernel_ram=0x21500000\0" \ - "kernel_size=0x00400000\0" \ - "kernel_size_fallback=0x00400000\0" \ - "loads_echo=1\0" \ - "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} " \ - "${kernel_size}\0" \ - "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};" \ - "run nfsargs;run addip;upgrade_available;bootm " \ - "${kernel_ram};reset\0" \ - "netdev=eth0\0" \ - "nfsargs=run root_path;setenv bootargs ${bootargs} " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "at91sam9_wdt.wdt_timeout=16\0" \ - "partitionset_active=A\0" \ - "preboot=echo;echo Type 'run flash_self' to use kernel and root "\ - "filesystem on memory;echo Type 'run flash_nfs' to use kernel " \ - "from memory and root filesystem over NFS;echo Type 'run net_nfs' "\ - "to get Kernel over TFTP and mount root filesystem over NFS;echo\0"\ - "project_dir=systemone\0" \ - "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0"\ - "rootfs=/dev/mtdblock5\0" \ - "rootfs_fallback=/dev/mtdblock7\0" \ - "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops "\ - "root=${rootfs} rootfstype=jffs2 panic=7 " \ - "at91sam9_wdt.wdt_timeout=16\0" \ - "stderr=serial\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "upgrade_available=0\0" -#endif - -#if defined(CONFIG_BOARD_TAURUS) -#define CONFIG_BOOTARGS CONFIG_BOOTARGS_TAURUS -#endif - -#if defined(CONFIG_BOARD_AXM) -#define CONFIG_BOOTARGS CONFIG_BOOTARGS_AXM -#endif - #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 546f2d3a4b..09d5718971 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -67,7 +67,6 @@ * Environment configuration */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS0,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR /* diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 5271b5cf44..c3fc8a3aa7 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -71,7 +71,6 @@ #endif /* PCI */ -#define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index 9655238951..37b78c1b57 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -40,7 +40,6 @@ #define CONFIG_ENV_OFFSET_REDUND \ (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index e5edd5e8fd..a7001e76aa 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -29,9 +29,6 @@ * This version should also enable all other non-production * interfaces / features. */ -#ifdef CONFIG_USB -#define CONFIG_CMD_PCI -#endif /* I2C */ #define CONFIG_SYS_I2C diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 514590a270..f2d0d22ad3 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -69,12 +69,6 @@ "fdt_addr=0x94C00000\0" \ "fdt_high=0x9fffffff\0" -#define CONFIG_BOOTARGS \ - "console=ttyAMA0,115200n8 " \ - "earlycon=pl011,0x87e024000000 " \ - "debug maxcpus=48 rootwait rw "\ - "root=/dev/sda2 coherent_pool=16M" - /* Do not preserve environment */ #define CONFIG_ENV_SIZE 0x1000 diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 4d9ec790fd..129ae4c466 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -149,7 +149,6 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index bba10ec001..77ed37c6f3 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -26,8 +26,6 @@ "fatload mmc 0 ${loadaddr} uImage;" \ "bootm ${loadaddr}" \ -#define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk" - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -118,8 +116,6 @@ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" - #define CONFIG_SYS_TEXT_BASE 0x80800000 #define CONFIG_DRIVER_TI_EMAC diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index ccd7cd72d2..ac3eb5d729 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -201,10 +201,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1700 /* address 0x2E0000 */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x1500 /* address 0x2A0000 */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x200 /* 256KiB */ - - -/* spl export command */ -#define CONFIG_CMD_SPL #endif /* General parts of the framework, required. */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 03e28fc39b..935815485e 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -197,9 +197,6 @@ #define CONFIG_DEV_USB_PHY_BASE KS2_DEV_USB_PHY_BASE #define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE -/* U-Boot command configuration */ -#define CONFIG_CMD_SAVES - /* U-Boot general configuration */ #define CONFIG_MISC_INIT_R #define CONFIG_MX_CYCLIC @@ -320,8 +317,6 @@ #endif #endif -#define CONFIG_BOOTARGS \ - /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h index 6834500c17..306f503d9e 100644 --- a/include/configs/ti_armv7_omap.h +++ b/include/configs/ti_armv7_omap.h @@ -16,9 +16,6 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -/* SPI IP Block */ -#define CONFIG_OMAP3_SPI - /* * GPMC NAND block. We support 1 device and the physical address to * access CS0 at is 0x8000000. diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 393d867a73..938136c946 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -60,7 +60,6 @@ /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (64 << 20)) diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index acfac24ebe..018e4c2512 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -139,7 +139,6 @@ * So moving TEXT_BASE down to non-HS limit. */ #define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 4c3a2766ec..73c1d8f66e 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -100,7 +100,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40300000 #endif -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index b670cc409a..ba76dcd293 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -32,8 +32,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200} -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" #define CONFIG_BOOTCOMMAND \ "dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" diff --git a/include/configs/trats.h b/include/configs/trats.h index 3059d89ac9..5d0a3240a6 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -41,7 +41,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TRATS -#define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run autoboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" @@ -166,7 +165,6 @@ "fdtaddr=40800000\0" \ /* Falcon mode definitions */ -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR CONFIG_SYS_SDRAM_BASE + 0x100 /* GPT */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 1f3ce9d941..7f6a61a1db 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -38,7 +38,6 @@ /* Console configuration */ -#define CONFIG_BOOTARGS "Please use defined boot" #define CONFIG_BOOTCOMMAND "run autoboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index fbdd43ac72..77f8cbde27 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -259,7 +259,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index fd36634ae9..301065a831 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -42,7 +42,6 @@ #define CONFIG_USB_ETHER_ASIX /* PCI host support */ -#define CONFIG_CMD_PCI /* General networking support */ diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 1020355ed5..d2c3e57570 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -26,7 +26,6 @@ /* * Commands configuration */ -#define CONFIG_CMD_PCI /* I2C support */ #define CONFIG_DM_I2C diff --git a/include/configs/twister.h b/include/configs/twister.h index 94dde90e60..bec402ea9c 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -36,11 +36,7 @@ "bootcmd=run nandboot\0" /* SPL OS boot options */ -#define CONFIG_CMD_SPL -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 -#define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ - 0x600000) #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 921b9e5ec6..cce245613d 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -93,7 +93,6 @@ unsigned char ulcb_softspi_read(void); #define CONFIG_SH_SDHI_FREQ 200000000 /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 1 #define CONFIG_SYS_MMC_ENV_PART 2 diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 1055e5b572..753d821a45 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -95,10 +95,6 @@ #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE #define CONFIG_ENV_SPI_MAX_HZ 15000000 #define CONFIG_BOOTCOMMAND "nboot 21000000 0" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock1 " \ - "mtdparts=" MTDPARTS_DEFAULT " " \ - "rw rootfstype=jffs2" #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 5bacc9d834..95e232429f 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -87,7 +87,6 @@ BOOTENV #ifndef CONFIG_CMDLINE -#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw" #define USBARMORY_FIT_PATH "/boot/usbarmory.itb" #define USBARMORY_FIT_ADDR "0x70800000" #endif diff --git a/include/configs/vct.h b/include/configs/vct.h index 2cb4ab149c..e7c3d4b589 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -105,10 +105,6 @@ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ #endif /* CONFIG_CMD_USB */ -#if defined(CONFIG_VCT_ONENAND) -#define CONFIG_CMD_ONENAND -#endif - /* * BOOTP options */ @@ -243,9 +239,6 @@ int vct_gpio_get(int pin); * (NOR/OneNAND) usage and Linux kernel booting. */ #if defined(CONFIG_VCT_SMALL_IMAGE) -#undef CONFIG_CMD_STRINGS -#undef CONFIG_CMD_TERMINAL - #undef CONFIG_SMC911X #undef CONFIG_SYS_I2C_SOFT #undef CONFIG_SOURCE diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 291185fecd..38c67cd109 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -312,7 +312,6 @@ /* * Command line configuration. */ -#define CONFIG_CMD_PCI #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 3b1233f615..c06f19d5a5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -173,15 +173,6 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ -/* Assume we boot with root on the first partition of a USB stick */ -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " \ - "root=/dev/sda2 rw " \ - "rootwait "\ - "earlyprintk=pl011,0x7ff80000 debug "\ - "user_debug=31 "\ - "androidboot.hardware=juno "\ - "loglevel=9" - /* Copy the kernel and FDT to DRAM memory and boot */ #define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \ "if test $? -eq 1; then "\ @@ -215,10 +206,6 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" -#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\ - "0x1c090000 debug user_debug=31 "\ - "loglevel=9" - #define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \ "smhload ${fdtfile} ${fdt_addr}; " \ "smhload ${initrd_name} ${initrd_addr} "\ @@ -236,13 +223,6 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" -#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\ - "0x1c090000 debug user_debug=31 "\ - "androidboot.hardware=fvpbase "\ - "root=/dev/vda2 rw "\ - "rootwait "\ - "loglevel=9" - #define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr" diff --git a/include/configs/veyron.h b/include/configs/veyron.h index 3f236aa13c..3a5fc065d8 100644 --- a/include/configs/veyron.h +++ b/include/configs/veyron.h @@ -17,8 +17,6 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPI_FLASH_GIGADEVICE -#define CONFIG_CMD_SF_TEST - #define CONFIG_KEYBOARD #endif diff --git a/include/configs/vinco.h b/include/configs/vinco.h index adff1b6d7f..e4020d00ce 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -97,9 +97,6 @@ "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \ "bootz ${loadaddr} - ${oftaddr}" -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656" - #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_start=0x20000\0" \ "kernel_size=0x800000\0" \ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 77da9e5e85..d34292b42f 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -83,7 +83,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif -#define CONFIG_CMD_PCI #ifdef CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 13ebafeac8..23dc884b12 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -343,11 +343,6 @@ #define CONFIG_SYS_RTC_BUS_NUM 0x01 #define CONFIG_SYS_I2C_RTC_ADDR 0x32 #define CONFIG_RTC_RX8025 -#define CONFIG_CMD_TSI148 - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif /* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0 @@ -530,8 +525,6 @@ #define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ -#undef CONFIG_BOOTARGS /* boot command will set bootargs */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "hostname=vme8349\0" \ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index ed25f420d0..d9237d7b81 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -123,6 +123,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ + func(SATA, sata, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h index bab7fdf93c..fb7385649e 100644 --- a/include/configs/woodburn_sd.h +++ b/include/configs/woodburn_sd.h @@ -21,7 +21,6 @@ * SPL */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x10002300 #define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index f7a3df103d..628797d2c5 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -130,7 +130,6 @@ #define CONFIG_LPC32XX_SSP #define CONFIG_LPC32XX_SSP_TIMEOUT 100000 -#define CONFIG_CMD_MAX6957 /* * Environment */ @@ -148,7 +147,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS2,115200n8" #define CONFIG_LOADADDR 0x80008000 /* diff --git a/include/configs/x600.h b/include/configs/x600.h index 18167a8a3c..1255edd5bd 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -97,11 +97,6 @@ #define CONFIG_USB_EHCI_SPEAR #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -/* - * Command support defines - */ -#define CONFIG_CMD_SAVES - /* Filesystem support (for USB key) */ #define CONFIG_SUPPORT_VFAT @@ -242,7 +237,6 @@ #define CONFIG_SPL_TEXT_BASE 0xd2800b00 #define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00) #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds" #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index a70fc9d4d9..687f8df450 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -66,12 +66,7 @@ /*----------------------------------------------------------------------- * Command line configuration. */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_ZBOOT - -#define CONFIG_BOOTARGS \ - "root=/dev/sdb3 init=/sbin/init rootwait ro" #define CONFIG_BOOTCOMMAND \ "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" @@ -108,7 +103,6 @@ /*----------------------------------------------------------------------- * FLASH configuration */ -#define CONFIG_CMD_SF_TEST #define CONFIG_SPI /*----------------------------------------------------------------------- diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h index bd829a9495..73f431681d 100644 --- a/include/configs/xfi3.h +++ b/include/configs/xfi3.h @@ -23,7 +23,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 77d7899def..6dcc8e59d8 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -89,7 +89,6 @@ #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 #define DFU_DEFAULT_POLL_TIMEOUT 300 #define CONFIG_USB_CABLE_CHECK -#define CONFIG_CMD_THOR_DOWNLOAD #define CONFIG_USB_FUNCTION_THOR #define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h index 4194b66c66..85f78ba43b 100644 --- a/include/configs/xilinx_zynqmp_zcu102.h +++ b/include/configs/xilinx_zynqmp_zcu102.h @@ -38,8 +38,6 @@ #define CONFIG_SYS_I2C_ZYNQ #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 478ca50a89..c4cd74999c 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -481,15 +481,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_IBAT7U CONFIG_SYS_DBAT7U /* - * Command configuration. - */ -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index f54971ee28..8fb0541604 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -284,15 +284,6 @@ #define CONFIG_BOOTP_GATEWAY /* - * Command configuration. - */ -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index c32b63d171..85faaf0ca3 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -334,15 +334,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_HAS_ETH1 /* - * Command configuration. - */ -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 7b0a0c6793..033537ca4a 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -333,15 +333,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* - * Command configuration. - */ -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PCI_ENUM -#define CONFIG_CMD_REGINFO - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 206ec344d9..df983d9f1e 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -123,12 +123,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/*=================*/ -/* U-Boot commands */ -/*=================*/ - -#define CONFIG_CMD_SAVES - /*==============================*/ /* U-Boot autoboot configuration */ /*==============================*/ diff --git a/include/configs/zc5202.h b/include/configs/zc5202.h index a7988e06f5..b1afde9ba0 100644 --- a/include/configs/zc5202.h +++ b/include/configs/zc5202.h @@ -26,7 +26,6 @@ #define CONFIG_FEC_MXC_PHYADDR 0 #define CONFIG_MV88E6352_SWITCH -#define CONFIG_CMD_PCI #define CONFIG_PCI_SCAN_SHOW #define CONFIG_PCIE_IMX diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index e730824146..5279f54a92 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -35,8 +35,6 @@ "else " \ "bootm 0x50000; " \ "fi; " -#define CONFIG_BOOTARGS \ - "console=tty0 console=ttyS2,115200 fbcon=rotate:3" #define CONFIG_TIMESTAMP #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 056eef7ce8..6359587738 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -91,7 +91,6 @@ # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 # define DFU_DEFAULT_POLL_TIMEOUT 300 # define CONFIG_USB_CABLE_CHECK -# define CONFIG_CMD_THOR_DOWNLOAD # define CONFIG_THOR_RESET_OFF # define CONFIG_USB_FUNCTION_THOR # define DFU_ALT_INFO_RAM \ @@ -318,11 +317,8 @@ /* Commands */ /* SPL part */ -#define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds" - /* MMC support */ #ifdef CONFIG_MMC_SDHCI_ZYNQ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/dataflash.h b/include/dataflash.h index 84a56c30ce..c9f22200cf 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -197,7 +197,7 @@ extern int AT91F_DataflashInit(void); extern void dataflash_print_info (void); extern void dataflash_perror (int err); -extern void AT91F_DataflashSetEnv (void); +extern void AT91F_Dataflashenv_set(void); extern struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS]; extern dataflash_protect_t area_list[NB_DATAFLASH_AREA]; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 2e6498b7dc..1a501992db 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -52,6 +52,7 @@ enum uclass_id { UCLASS_MOD_EXP, /* RSA Mod Exp device */ UCLASS_MTD, /* Memory Technology Device (MTD) device */ UCLASS_NORTHBRIDGE, /* Intel Northbridge / SDRAM controller */ + UCLASS_NVME, /* NVM Express device */ UCLASS_PANEL, /* Display panel, such as an LCD */ UCLASS_PANEL_BACKLIGHT, /* Backlight controller for panel */ UCLASS_PCH, /* x86 platform controller hub */ diff --git a/include/dt-bindings/memory/rk3368-dmc.h b/include/dt-bindings/memory/rk3368-dmc.h new file mode 100644 index 0000000000..b06ffde718 --- /dev/null +++ b/include/dt-bindings/memory/rk3368-dmc.h @@ -0,0 +1,30 @@ +#ifndef DT_BINDINGS_RK3368_DMC_H +#define DT_BINDINGS_RK3368_DMC_H + +#define DMC_MSCH_CBDR 0x0 +#define DMC_MSCH_CBRD 0x1 +#define DMC_MSCH_CRBD 0x2 + +#define DDR3_800D 0 +#define DDR3_800E 1 +#define DDR3_1066E 2 +#define DDR3_1066F 3 +#define DDR3_1066G 4 +#define DDR3_1333F 5 +#define DDR3_1333G 6 +#define DDR3_1333H 7 +#define DDR3_1333J 8 +#define DDR3_1600G 9 +#define DDR3_1600H 10 +#define DDR3_1600J 11 +#define DDR3_1600K 12 +#define DDR3_1866J 13 +#define DDR3_1866K 14 +#define DDR3_1866L 15 +#define DDR3_1866M 16 +#define DDR3_2133K 17 +#define DDR3_2133L 18 +#define DDR3_2133M 19 +#define DDR3_2133N 20 + +#endif diff --git a/include/env_default.h b/include/env_default.h index acd4198443..b574345af2 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -28,7 +28,7 @@ const uchar default_environment[] = { #ifdef CONFIG_ENV_FLAGS_LIST_DEFAULT ENV_FLAGS_VAR "=" CONFIG_ENV_FLAGS_LIST_DEFAULT "\0" #endif -#ifdef CONFIG_BOOTARGS +#ifdef CONFIG_USE_BOOTARGS "bootargs=" CONFIG_BOOTARGS "\0" #endif #ifdef CONFIG_BOOTCOMMAND diff --git a/include/environment.h b/include/environment.h index d86230a2e9..03b41e0c51 100644 --- a/include/environment.h +++ b/include/environment.h @@ -143,10 +143,6 @@ extern unsigned long nand_env_oob_offset; # define ENV_HEADER_SIZE (sizeof(uint32_t)) #endif -#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) -extern char *env_name_spec; -#endif - #ifdef CONFIG_ENV_AES /* Make sure the payload is multiple of AES block size */ #define ENV_SIZE ((CONFIG_ENV_SIZE - ENV_HEADER_SIZE) & ~(16 - 1)) @@ -174,9 +170,6 @@ extern env_t environment; extern const unsigned char default_environment[]; extern env_t *env_ptr; -extern void env_relocate_spec(void); -extern unsigned char env_get_char_spec(int); - #if defined(CONFIG_NEEDS_MANUAL_RELOC) extern void env_reloc(void); #endif @@ -197,20 +190,101 @@ extern uint mmc_get_env_part(struct mmc *mmc); #include <env_flags.h> #include <search.h> -extern struct hsearch_data env_htab; +/* Value for environment validity */ +enum env_valid { + ENV_INVALID, /* No valid environment */ + ENV_VALID, /* First or only environment is valid */ + ENV_REDUND, /* Redundant environment is valid */ +}; + +enum env_location { + ENVL_DATAFLASH, + ENVL_EEPROM, + ENVL_EXT4, + ENVL_FAT, + ENVL_FLASH, + ENVL_MMC, + ENVL_NAND, + ENVL_NVRAM, + ENVL_ONENAND, + ENVL_REMOTE, + ENVL_SPI_FLASH, + ENVL_UBI, + ENVL_NOWHERE, + + ENVL_COUNT, + ENVL_UNKNOWN, +}; + +struct env_driver { + const char *name; + enum env_location location; + + /** + * get_char() - Read a character from the environment + * + * This method is optional. If not provided, a default implementation + * will read from gd->env_addr. + * + * @index: Index of character to read (0=first) + * @return character read, or -ve on error + */ + int (*get_char)(int index); + + /** + * load() - Load the environment from storage + * + * This method is optional. If not provided, no environment will be + * loaded. + * + * @return 0 if OK, -ve on error + */ + int (*load)(void); + + /** + * save() - Save the environment to storage + * + * This method is required for 'saveenv' to work. + * + * @return 0 if OK, -ve on error + */ + int (*save)(void); + + /** + * init() - Set up the initial pre-relocation environment + * + * This method is optional. + * + * @return 0 if OK, -ENOENT if no initial environment could be found, + * other -ve on error + */ + int (*init)(void); +}; + +/* Declare a new environment location driver */ +#define U_BOOT_ENV_LOCATION(__name) \ + ll_entry_declare(struct env_driver, __name, env_driver) + +/* Declare the name of a location */ +#ifdef CONFIG_CMD_SAVEENV +#define ENV_NAME(_name) .name = _name, +#else +#define ENV_NAME(_name) +#endif -/* Function that returns a character from the environment */ -unsigned char env_get_char(int); +#ifdef CONFIG_CMD_SAVEENV +#define env_save_ptr(x) x +#else +#define env_save_ptr(x) NULL +#endif -/* Function that returns a pointer to a value from the environment */ -const unsigned char *env_get_addr(int); -unsigned char env_get_char_memory(int index); +extern struct hsearch_data env_htab; /* Function that updates CRC of the enironment */ void env_crc_update(void); /* Look up the variable from the default environment */ -char *getenv_default(const char *name); +char *env_get_default(const char *name); /* [re]set to the default environment */ void set_default_env(const char *s); @@ -229,6 +303,37 @@ int env_export(env_t *env_out); int env_import_redund(const char *buf1, const char *buf2); #endif +/** + * env_driver_lookup_default() - Look up the default environment driver + * + * @return pointer to driver, or NULL if none (which should not happen) + */ +struct env_driver *env_driver_lookup_default(void); + +/** + * env_get_char() - Get a character from the early environment + * + * This reads from the pre-relocation environemnt + * + * @index: Index of character to read (0 = first) + * @return character read, or -ve on error + */ +int env_get_char(int index); + +/** + * env_load() - Load the environment from storage + * + * @return 0 if OK, -ve on error + */ +int env_load(void); + +/** + * env_save() - Save the environment to storage + * + * @return 0 if OK, -ve on error + */ +int env_save(void); + #endif /* DO_DEPS_ONLY */ #endif /* _ENVIRONMENT_H_ */ diff --git a/include/exports.h b/include/exports.h index 1d81bc4b28..ebe81d914c 100644 --- a/include/exports.h +++ b/include/exports.h @@ -27,8 +27,8 @@ unsigned long get_timer(unsigned long); int vprintf(const char *, va_list); unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base); int strict_strtoul(const char *cp, unsigned int base, unsigned long *res); -char *getenv (const char *name); -int setenv (const char *varname, const char *varvalue); +char *env_get(const char *name); +int env_set(const char *varname, const char *value); long simple_strtol(const char *cp, char **endp, unsigned int base); int strcmp(const char *cs, const char *ct); unsigned long ustrtoul(const char *cp, char **endp, unsigned int base); diff --git a/include/flash.h b/include/flash.h index 908d7cec6c..55c5bdd4b1 100644 --- a/include/flash.h +++ b/include/flash.h @@ -467,7 +467,6 @@ extern flash_info_t *flash_get_info(ulong base); #define FLASH_S29GL128N 0x00F1 /* Spansion S29GL128N */ #define FLASH_STM32 0x00F2 /* STM32 Embedded Flash */ -#define FLASH_STM32F1 0x00F3 /* STM32F1 Embedded Flash */ #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */ diff --git a/include/fsl_csu.h b/include/fsl_csu.h index 8582ac0774..027a811aaf 100644 --- a/include/fsl_csu.h +++ b/include/fsl_csu.h @@ -30,7 +30,7 @@ struct csu_ns_dev { }; void enable_layerscape_ns_access(void); -void set_devices_ns_access(struct csu_ns_dev *ns_dev, u16 val); +void set_devices_ns_access(unsigned long, u16 val); void set_pcie_ns_access(int pcie, u16 val); #endif diff --git a/include/image.h b/include/image.h index c6f1513220..1f4bfda2f3 100644 --- a/include/image.h +++ b/include/image.h @@ -373,7 +373,7 @@ typedef struct bootm_headers { bd_t *kbd; #endif - int verify; /* getenv("verify")[0] != 'n' */ + int verify; /* env_get("verify")[0] != 'n' */ #define BOOTM_STATE_START (0x00000001) #define BOOTM_STATE_FINDOS (0x00000002) @@ -769,9 +769,9 @@ static inline void image_set_name(image_header_t *hdr, const char *name) int image_check_hcrc(const image_header_t *hdr); int image_check_dcrc(const image_header_t *hdr); #ifndef USE_HOSTCC -ulong getenv_bootm_low(void); -phys_size_t getenv_bootm_size(void); -phys_size_t getenv_bootm_mapsize(void); +ulong env_get_bootm_low(void); +phys_size_t env_get_bootm_size(void); +phys_size_t env_get_bootm_mapsize(void); #endif void memmove_wd(void *to, void *from, size_t len, ulong chunksz); diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index 486fb94c57..fbfc7188b8 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -51,12 +51,25 @@ #define _IS_SPL 1 #endif +#ifdef CONFIG_TPL_BUILD +#define _IS_TPL 1 +#endif + +#if defined(CONFIG_TPL_BUILD) +#define config_val(cfg) _config_val(_IS_TPL, cfg) +#define _config_val(x, cfg) __config_val(x, cfg) +#define __config_val(x, cfg) ___config_val(__ARG_PLACEHOLDER_##x, cfg) +#define ___config_val(arg1_or_junk, cfg) \ + ____config_val(arg1_or_junk CONFIG_TPL_##cfg, CONFIG_##cfg) +#define ____config_val(__ignored, val, ...) val +#else #define config_val(cfg) _config_val(_IS_SPL, cfg) #define _config_val(x, cfg) __config_val(x, cfg) #define __config_val(x, cfg) ___config_val(__ARG_PLACEHOLDER_##x, cfg) #define ___config_val(arg1_or_junk, cfg) \ ____config_val(arg1_or_junk CONFIG_SPL_##cfg, CONFIG_##cfg) #define ____config_val(__ignored, val, ...) val +#endif /* * CONFIG_VAL(FOO) evaluates to the value of diff --git a/include/linux/mii.h b/include/linux/mii.h index 66b83d83de..19afb746cd 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -190,4 +190,27 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock, return 0; } +/** + * mii_resolve_flowctrl_fdx + * @lcladv: value of MII ADVERTISE register + * @rmtadv: value of MII LPA register + * + * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3 + */ +static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) +{ + u8 cap = 0; + + if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) { + cap = FLOW_CTRL_TX | FLOW_CTRL_RX; + } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) { + if (lcladv & ADVERTISE_PAUSE_CAP) + cap = FLOW_CTRL_RX; + else if (rmtadv & ADVERTISE_PAUSE_CAP) + cap = FLOW_CTRL_TX; + } + + return cap; +} + #endif /* __LINUX_MII_H__ */ diff --git a/include/net.h b/include/net.h index e1269486ad..455b48f6c7 100644 --- a/include/net.h +++ b/include/net.h @@ -239,11 +239,11 @@ void eth_set_current(void); /* set nterface to ethcur var */ int eth_get_dev_index(void); /* get the device index */ void eth_parse_enetaddr(const char *addr, uchar *enetaddr); -int eth_getenv_enetaddr(const char *name, uchar *enetaddr); -int eth_setenv_enetaddr(const char *name, const uchar *enetaddr); +int eth_env_get_enetaddr(const char *name, uchar *enetaddr); +int eth_env_set_enetaddr(const char *name, const uchar *enetaddr); /** - * eth_setenv_enetaddr_by_index() - set the MAC address environment variable + * eth_env_set_enetaddr_by_index() - set the MAC address environment variable * * This sets up an environment variable with the given MAC address (@enetaddr). * The environment variable to be set is defined by <@base_name><@index>addr. @@ -255,7 +255,7 @@ int eth_setenv_enetaddr(const char *name, const uchar *enetaddr); * @enetaddr: Pointer to MAC address to put into the variable * @return 0 if OK, other value on error */ -int eth_setenv_enetaddr_by_index(const char *base_name, int index, +int eth_env_set_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); @@ -275,7 +275,7 @@ int usb_ether_init(void); * Returns: * Return true if the address is valid. */ -int eth_getenv_enetaddr_by_index(const char *base_name, int index, +int eth_env_get_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); int eth_init(void); /* Initialize the device */ @@ -834,7 +834,7 @@ void vlan_to_string(ushort x, char *s); ushort string_to_vlan(const char *s); /* read a VLAN id from an environment variable */ -ushort getenv_vlan(char *); +ushort env_get_vlan(char *); /* copy a filename (allow for "..." notation, limit length) */ void copy_filename(char *dst, const char *src, int size); diff --git a/include/netdev.h b/include/netdev.h index c06b90886b..b9bfebac67 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -130,7 +130,12 @@ static inline int pci_eth_init(bd_t *bis) return num; } +#ifdef CONFIG_DM_ETH +struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id); +#else struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id); +#endif + #ifdef CONFIG_PHYLIB struct phy_device; int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, diff --git a/include/nvme.h b/include/nvme.h new file mode 100644 index 0000000000..8375d61e02 --- /dev/null +++ b/include/nvme.h @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2017 NXP Semiconductors + * Copyright (C) 2017 Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __NVME_H__ +#define __NVME_H__ + +struct nvme_dev; + +/** + * nvme_identify - identify controller or namespace capabilities and status + * + * This issues an identify command to the NVMe controller to return a data + * buffer that describes the controller or namespace capabilities and status. + * + * @dev: NVMe controller device + * @nsid: 0 for controller, namespace id for namespace to identify + * @cns: 1 for controller, 0 for namespace + * @dma_addr: dma buffer address to store the identify result + * @return: 0 on success, -ETIMEDOUT on command execution timeout, + * -EIO on command execution fails + */ +int nvme_identify(struct nvme_dev *dev, unsigned nsid, + unsigned cns, dma_addr_t dma_addr); + +/** + * nvme_get_features - retrieve the attributes of the feature specified + * + * This retrieves the attributes of the feature specified. + * + * @dev: NVMe controller device + * @fid: feature id to provide data + * @nsid: namespace id the command applies to + * @dma_addr: data structure used as part of the specified feature + * @result: command-specific result in the completion queue entry + * @return: 0 on success, -ETIMEDOUT on command execution timeout, + * -EIO on command execution fails + */ +int nvme_get_features(struct nvme_dev *dev, unsigned fid, unsigned nsid, + dma_addr_t dma_addr, u32 *result); + +/** + * nvme_set_features - specify the attributes of the feature indicated + * + * This specifies the attributes of the feature indicated. + * + * @dev: NVMe controller device + * @fid: feature id to provide data + * @dword11: command-specific input parameter + * @dma_addr: data structure used as part of the specified feature + * @result: command-specific result in the completion queue entry + * @return: 0 on success, -ETIMEDOUT on command execution timeout, + * -EIO on command execution fails + */ +int nvme_set_features(struct nvme_dev *dev, unsigned fid, unsigned dword11, + dma_addr_t dma_addr, u32 *result); + +/** + * nvme_scan_namespace - scan all namespaces attached to NVMe controllers + * + * This probes all registered NVMe uclass device drivers in the system, + * and tries to find all namespaces attached to the NVMe controllers. + * + * @return: 0 on success, -ve on error + */ +int nvme_scan_namespace(void); + +/** + * nvme_print_info - print detailed NVMe controller and namespace information + * + * This prints out detailed human readable NVMe controller and namespace + * information which is very useful for debugging. + * + * @udev: NVMe controller device + * @return: 0 on success, -EIO if NVMe identify command fails + */ +int nvme_print_info(struct udevice *udev); + +#endif /* __NVME_H__ */ diff --git a/include/pci_ids.h b/include/pci_ids.h index ab6aa58adb..fdda679cc0 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -21,6 +21,7 @@ #define PCI_CLASS_STORAGE_SATA 0x0106 #define PCI_CLASS_STORAGE_SATA_AHCI 0x010601 #define PCI_CLASS_STORAGE_SAS 0x0107 +#define PCI_CLASS_STORAGE_EXPRESS 0x010802 #define PCI_CLASS_STORAGE_OTHER 0x0180 #define PCI_BASE_CLASS_NETWORK 0x02 diff --git a/include/search.h b/include/search.h index 402dfd84fb..df5d61c2eb 100644 --- a/include/search.h +++ b/include/search.h @@ -118,7 +118,7 @@ extern int hwalk_r(struct hsearch_data *__htab, int (*callback)(ENTRY *)); #define H_MATCH_SUBSTR (1 << 7) /* search for substring matches */ #define H_MATCH_REGEX (1 << 8) /* search for regular expression matches */ #define H_MATCH_METHOD (H_MATCH_IDENT | H_MATCH_SUBSTR | H_MATCH_REGEX) -#define H_PROGRAMMATIC (1 << 9) /* indicate that an import is from setenv() */ +#define H_PROGRAMMATIC (1 << 9) /* indicate that an import is from env_set() */ #define H_ORIGIN_FLAGS (H_INTERACTIVE | H_PROGRAMMATIC) #endif /* _SEARCH_H_ */ diff --git a/include/spl.h b/include/spl.h index ffadce93c7..ce4cf0abbe 100644 --- a/include/spl.h +++ b/include/spl.h @@ -268,4 +268,14 @@ int spl_mmc_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev); void bl31_entry(void); + +/** + * board_return_to_bootrom - allow for boards to continue with the boot ROM + * + * If a board (e.g. the Rockchip RK3368 boards) provide some + * supporting functionality for SPL in their boot ROM and the SPL + * stage wants to return to the ROM code to continue booting, boards + * can implement 'board_return_to_bootrom'. + */ +void board_return_to_bootrom(void); #endif diff --git a/include/sx151x.h b/include/sx151x.h deleted file mode 100644 index be42b0681b..0000000000 --- a/include/sx151x.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2013 - * Viktar Palstsiuk, Promwad, viktar.palstsiuk@promwad.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __SX151X_H_ -#define __SX151X_H_ - -int sx151x_get_value(int chip, int gpio); -int sx151x_set_value(int chip, int gpio, int val); -int sx151x_direction_input(int chip, int gpio); -int sx151x_direction_output(int chip, int gpio); -int sx151x_reset(int chip); - -#endif /* __SX151X_H_ */ diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h index 847b6989a0..cd3eb47da4 100644 --- a/include/usb/ehci-ci.h +++ b/include/usb/ehci-ci.h @@ -156,7 +156,7 @@ #elif defined(CONFIG_MPC85xx) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC85xx_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC85xx_USB2_ADDR -#elif defined(CONFIG_ARCH_LS1021A) +#elif defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR 0 #endif diff --git a/include/wdt.h b/include/wdt.h index 0b5f05851a..9b90fbeeb3 100644 --- a/include/wdt.h +++ b/include/wdt.h @@ -21,12 +21,12 @@ * Start the timer * * @dev: WDT Device - * @timeout: Number of ticks before timer expires + * @timeout_ms: Number of ticks (milliseconds) before timer expires * @flags: Driver specific flags. This might be used to specify * which action needs to be executed when the timer expires * @return: 0 if OK, -ve on error */ -int wdt_start(struct udevice *dev, u64 timeout, ulong flags); +int wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags); /* * Stop the timer, thus disabling the Watchdog. Use wdt_start to start it again. @@ -67,12 +67,12 @@ struct wdt_ops { * Start the timer * * @dev: WDT Device - * @timeout: Number of ticks before the timer expires + * @timeout_ms: Number of ticks (milliseconds) before the timer expires * @flags: Driver specific flags. This might be used to specify * which action needs to be executed when the timer expires * @return: 0 if OK, -ve on error */ - int (*start)(struct udevice *dev, u64 timeout, ulong flags); + int (*start)(struct udevice *dev, u64 timeout_ms, ulong flags); /* * Stop the timer * diff --git a/lib/Kconfig b/lib/Kconfig index 2f5a210ad4..81636172bc 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -61,6 +61,15 @@ config SPL_TINY_MEMSET size-constrained envrionments even this may be too big. Enable this option to reduce code size slightly at the cost of some speed. +config TPL_TINY_MEMSET + bool "Use a very small memset() in TPL" + help + The faster memset() is the arch-specific one (if available) enabled + by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get + better performance by writing a word at a time. But in very + size-constrained envrionments even this may be too big. Enable this + option to reduce code size slightly at the cost of some speed. + config RBTREE bool diff --git a/lib/Makefile b/lib/Makefile index eacc7d6485..2eef1eb80e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,11 +49,11 @@ obj-$(CONFIG_RSA) += rsa/ obj-$(CONFIG_SHA1) += sha1.o obj-$(CONFIG_SHA256) += sha256.o -obj-$(CONFIG_SPL_SAVEENV) += qsort.o -obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/ -ifneq ($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy) -obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o -obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec.o +obj-$(CONFIG_$(SPL_TPL_)SAVEENV) += qsort.o +obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ +ifneq ($(CONFIG_$(SPL_TPL_)BUILD)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy) +obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += fdtdec_common.o +obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += fdtdec.o endif ifdef CONFIG_SPL_BUILD diff --git a/lib/fdtdec.c b/lib/fdtdec.c index d2dbd0f122..107a892e79 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1240,7 +1240,7 @@ int fdtdec_setup(void) # endif # ifndef CONFIG_SPL_BUILD /* Allow the early environment to override the fdt address */ - gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, + gd->fdt_blob = (void *)env_get_ulong("fdtcontroladdr", 16, (uintptr_t)gd->fdt_blob); # endif #endif diff --git a/lib/smbios.c b/lib/smbios.c index 22ca247fec..8f19ad89c1 100644 --- a/lib/smbios.c +++ b/lib/smbios.c @@ -112,7 +112,7 @@ static int smbios_write_type1(ulong *current, int handle) { struct smbios_type1 *t = (struct smbios_type1 *)*current; int len = sizeof(struct smbios_type1); - char *serial_str = getenv("serial#"); + char *serial_str = env_get("serial#"); memset(t, 0, sizeof(struct smbios_type1)); fill_smbios_header(t, SMBIOS_SYSTEM_INFORMATION, len, handle); @@ -95,8 +95,10 @@ int pack_byte_string(uint8_t *str, size_t size, const char *format, ...) return -1; } - if (offset + length > size) + if (offset + length > size) { + va_end(args); return -1; + } switch (*format) { case 'b': @@ -163,6 +165,7 @@ int unpack_byte_string(const uint8_t *str, size_t size, const char *format, ...) length = va_arg(args, uint32_t); break; default: + va_end(args); debug("Couldn't recognize format string\n"); return -1; } diff --git a/lib/uuid.c b/lib/uuid.c index c8584edcb8..1536c027da 100644 --- a/lib/uuid.c +++ b/lib/uuid.c @@ -291,7 +291,7 @@ int do_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc == 1) printf("%s\n", uuid); else - setenv(argv[1], uuid); + env_set(argv[1], uuid); return CMD_RET_SUCCESS; } @@ -194,7 +194,7 @@ void arp_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len) if (net_server_ip.s_addr == net_arp_wait_packet_ip.s_addr) { char buf[20]; sprintf(buf, "%pM", &arp->ar_sha); - setenv("serveraddr", buf); + env_set("serveraddr", buf); } #endif diff --git a/net/bootp.c b/net/bootp.c index be8f710e0c..73370a13fe 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -170,7 +170,7 @@ static void store_net_params(struct bootp_hdr *bp) * not contain a new value */ if (*net_boot_file_name) - setenv("bootfile", net_boot_file_name); + env_set("bootfile", net_boot_file_name); #endif net_copy_ip(&net_ip, &bp->bp_yiaddr); } @@ -414,7 +414,7 @@ static void bootp_timeout_handler(void) static u8 *add_vci(u8 *e) { char *vci = NULL; - char *env_vci = getenv("bootp_vci"); + char *env_vci = env_get("bootp_vci"); #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING) vci = CONFIG_SPL_NET_VCI_STRING; @@ -488,7 +488,7 @@ static int dhcp_extended(u8 *e, int message_type, struct in_addr server_ip, *e++ = tmp & 0xff; } #if defined(CONFIG_BOOTP_SEND_HOSTNAME) - hostname = getenv("hostname"); + hostname = env_get("hostname"); if (hostname) { int hostnamelen = strlen(hostname); @@ -503,8 +503,8 @@ static int dhcp_extended(u8 *e, int message_type, struct in_addr server_ip, clientarch = CONFIG_BOOTP_PXE_CLIENTARCH; #endif - if (getenv("bootp_arch")) - clientarch = getenv_ulong("bootp_arch", 16, clientarch); + if (env_get("bootp_arch")) + clientarch = env_get_ulong("bootp_arch", 16, clientarch); if (clientarch > 0) { *e++ = 93; /* Client System Architecture */ @@ -520,7 +520,7 @@ static int dhcp_extended(u8 *e, int message_type, struct in_addr server_ip, *e++ = 0; /* minor revision */ #ifdef CONFIG_LIB_UUID - uuid = getenv("pxeuuid"); + uuid = env_get("pxeuuid"); if (uuid) { if (uuid_str_valid(uuid)) { @@ -713,7 +713,7 @@ void bootp_request(void) dhcp_state = INIT; #endif - ep = getenv("bootpretryperiod"); + ep = env_get("bootpretryperiod"); if (ep != NULL) time_taken_max = simple_strtoul(ep, NULL, 10); else @@ -184,7 +184,7 @@ static void dns_handler(uchar *pkt, unsigned dest, struct in_addr sip, ip_to_string(ip_addr, ip_str); printf("%s\n", ip_str); if (net_dns_env_var) - setenv(net_dns_env_var, ip_str); + env_set(net_dns_env_var, ip_str); } else { puts("server responded with invalid IP number\n"); } diff --git a/net/eth-uclass.c b/net/eth-uclass.c index b659961a5d..d30b04ba86 100644 --- a/net/eth-uclass.c +++ b/net/eth-uclass.c @@ -241,8 +241,8 @@ U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr); int eth_init(void) { - char *ethact = getenv("ethact"); - char *ethrotate = getenv("ethrotate"); + char *ethact = env_get("ethact"); + char *ethrotate = env_get("ethrotate"); struct udevice *current = NULL; struct udevice *old_current; int ret = -ENODEV; @@ -401,7 +401,7 @@ int eth_initialize(void) printf("No ethernet found.\n"); bootstage_error(BOOTSTAGE_ID_NET_ETH_START); } else { - char *ethprime = getenv("ethprime"); + char *ethprime = env_get("ethprime"); struct udevice *prime_dev = NULL; if (ethprime) @@ -495,7 +495,7 @@ static int eth_post_probe(struct udevice *dev) if (eth_get_ops(dev)->read_rom_hwaddr) eth_get_ops(dev)->read_rom_hwaddr(dev); - eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr); + eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr); if (!is_zero_ethaddr(env_enetaddr)) { if (!is_zero_ethaddr(pdata->enetaddr) && memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) { @@ -510,7 +510,7 @@ static int eth_post_probe(struct udevice *dev) /* Override the ROM MAC address */ memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN); } else if (is_valid_ethaddr(pdata->enetaddr)) { - eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr); + eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr); printf("\nWarning: %s using MAC address from ROM\n", dev->name); } else if (is_zero_ethaddr(pdata->enetaddr) || diff --git a/net/eth_common.c b/net/eth_common.c index 58fa295771..66d0d22966 100644 --- a/net/eth_common.c +++ b/net/eth_common.c @@ -24,38 +24,38 @@ void eth_parse_enetaddr(const char *addr, uchar *enetaddr) } } -int eth_getenv_enetaddr(const char *name, uchar *enetaddr) +int eth_env_get_enetaddr(const char *name, uchar *enetaddr) { - eth_parse_enetaddr(getenv(name), enetaddr); + eth_parse_enetaddr(env_get(name), enetaddr); return is_valid_ethaddr(enetaddr); } -int eth_setenv_enetaddr(const char *name, const uchar *enetaddr) +int eth_env_set_enetaddr(const char *name, const uchar *enetaddr) { char buf[ARP_HLEN_ASCII + 1]; - if (eth_getenv_enetaddr(name, (uchar *)buf)) + if (eth_env_get_enetaddr(name, (uchar *)buf)) return -EEXIST; sprintf(buf, "%pM", enetaddr); - return setenv(name, buf); + return env_set(name, buf); } -int eth_getenv_enetaddr_by_index(const char *base_name, int index, +int eth_env_get_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr) { char enetvar[32]; sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); - return eth_getenv_enetaddr(enetvar, enetaddr); + return eth_env_get_enetaddr(enetvar, enetaddr); } -int eth_setenv_enetaddr_by_index(const char *base_name, int index, +int eth_env_set_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr) { char enetvar[32]; sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); - return eth_setenv_enetaddr(enetvar, enetaddr); + return eth_env_set_enetaddr(enetvar, enetaddr); } void eth_common_init(void) @@ -76,13 +76,13 @@ int eth_mac_skip(int index) char *skip_state; sprintf(enetvar, index ? "eth%dmacskip" : "ethmacskip", index); - skip_state = getenv(enetvar); + skip_state = env_get(enetvar); return skip_state != NULL; } void eth_current_changed(void) { - char *act = getenv("ethact"); + char *act = env_get("ethact"); char *ethrotate; /* @@ -90,21 +90,21 @@ void eth_current_changed(void) * ethernet device if uc_priv->current == NULL. This is not what * we want when 'ethrotate' variable is 'no'. */ - ethrotate = getenv("ethrotate"); + ethrotate = env_get("ethrotate"); if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) return; /* update current ethernet name */ if (eth_get_dev()) { if (act == NULL || strcmp(act, eth_get_name()) != 0) - setenv("ethact", eth_get_name()); + env_set("ethact", eth_get_name()); } /* * remove the variable completely if there is no active * interface */ else if (act != NULL) - setenv("ethact", NULL); + env_set("ethact", NULL); } void eth_try_another(int first_restart) @@ -116,7 +116,7 @@ void eth_try_another(int first_restart) * Do not rotate between network interfaces when * 'ethrotate' variable is set to 'no'. */ - ethrotate = getenv("ethrotate"); + ethrotate = env_get("ethrotate"); if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) return; @@ -142,12 +142,12 @@ void eth_set_current(void) env_id = get_env_id(); if ((act == NULL) || (env_changed_id != env_id)) { - act = getenv("ethact"); + act = env_get("ethact"); env_changed_id = env_id; } if (act == NULL) { - char *ethprime = getenv("ethprime"); + char *ethprime = env_get("ethprime"); void *dev = NULL; if (ethprime) diff --git a/net/eth_internal.h b/net/eth_internal.h index a14b20844f..4b0e716b73 100644 --- a/net/eth_internal.h +++ b/net/eth_internal.h @@ -13,7 +13,7 @@ void eth_common_init(void); /** - * eth_setenv_enetaddr_by_index() - set the MAC address environment variable + * eth_env_set_enetaddr_by_index() - set the MAC address environment variable * * This sets up an environment variable with the given MAC address (@enetaddr). * The environment variable to be set is defined by <@base_name><@index>addr. @@ -25,7 +25,7 @@ void eth_common_init(void); * @enetaddr: Pointer to MAC address to put into the variable * @return 0 if OK, other value on error */ -int eth_setenv_enetaddr_by_index(const char *base_name, int index, +int eth_env_set_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); int eth_mac_skip(int index); diff --git a/net/eth_legacy.c b/net/eth_legacy.c index e4bd0f4c1a..be0cf64a3d 100644 --- a/net/eth_legacy.c +++ b/net/eth_legacy.c @@ -137,7 +137,7 @@ int eth_write_hwaddr(struct eth_device *dev, const char *base_name, unsigned char env_enetaddr[ARP_HLEN]; int ret = 0; - eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr); + eth_env_get_enetaddr_by_index(base_name, eth_number, env_enetaddr); if (!is_zero_ethaddr(env_enetaddr)) { if (!is_zero_ethaddr(dev->enetaddr) && @@ -152,8 +152,8 @@ int eth_write_hwaddr(struct eth_device *dev, const char *base_name, memcpy(dev->enetaddr, env_enetaddr, ARP_HLEN); } else if (is_valid_ethaddr(dev->enetaddr)) { - eth_setenv_enetaddr_by_index(base_name, eth_number, - dev->enetaddr); + eth_env_set_enetaddr_by_index(base_name, eth_number, + dev->enetaddr); } else if (is_zero_ethaddr(dev->enetaddr)) { #ifdef CONFIG_NET_RANDOM_ETHADDR net_random_ethaddr(dev->enetaddr); @@ -261,7 +261,7 @@ int eth_initialize(void) bootstage_error(BOOTSTAGE_ID_NET_ETH_START); } else { struct eth_device *dev = eth_devices; - char *ethprime = getenv("ethprime"); + char *ethprime = env_get("ethprime"); bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT); do { diff --git a/net/link_local.c b/net/link_local.c index dfd240dfbc..31cdef4083 100644 --- a/net/link_local.c +++ b/net/link_local.c @@ -104,7 +104,7 @@ static void configure_wait(void) void link_local_start(void) { - ip = getenv_ip("llipaddr"); + ip = env_get_ip("llipaddr"); if (ip.s_addr != 0 && (ntohl(ip.s_addr) & IN_CLASSB_NET) != LINKLOCAL_ADDR) { puts("invalid link address"); @@ -319,7 +319,7 @@ U_BOOT_ENV_CALLBACK(dnsip, on_dnsip); void net_auto_load(void) { #if defined(CONFIG_CMD_NFS) - const char *s = getenv("autoload"); + const char *s = env_get("autoload"); if (s != NULL && strcmp(s, "NFS") == 0) { /* @@ -329,7 +329,7 @@ void net_auto_load(void) return; } #endif - if (getenv_yesno("autoload") == 0) { + if (env_get_yesno("autoload") == 0) { /* * Just use BOOTP/RARP to configure system; * Do not use TFTP to load the bootfile. @@ -616,8 +616,8 @@ restart: if (net_boot_file_size > 0) { printf("Bytes transferred = %d (%x hex)\n", net_boot_file_size, net_boot_file_size); - setenv_hex("filesize", net_boot_file_size); - setenv_hex("fileaddr", load_addr); + env_set_hex("filesize", net_boot_file_size); + env_set_hex("fileaddr", load_addr); } if (protocol != NETCONS) eth_halt(); @@ -668,7 +668,7 @@ int net_start_again(void) unsigned long retrycnt = 0; int ret; - nretry = getenv("netretry"); + nretry = env_get("netretry"); if (nretry) { if (!strcmp(nretry, "yes")) retry_forever = 1; @@ -1536,7 +1536,7 @@ ushort string_to_vlan(const char *s) return htons(id); } -ushort getenv_vlan(char *var) +ushort env_get_vlan(char *var) { - return string_to_vlan(getenv(var)); + return string_to_vlan(env_get(var)); } diff --git a/net/tftp.c b/net/tftp.c index 61e1671068..a5ed8c5d0a 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -706,11 +706,11 @@ void tftp_start(enum proto_t protocol) * TFTP protocol has a minimal timeout of 1 second. */ - ep = getenv("tftpblocksize"); + ep = env_get("tftpblocksize"); if (ep != NULL) tftp_block_size_option = simple_strtol(ep, NULL, 10); - ep = getenv("tftptimeout"); + ep = env_get("tftptimeout"); if (ep != NULL) timeout_ms = simple_strtol(ep, NULL, 10); @@ -720,7 +720,7 @@ void tftp_start(enum proto_t protocol) timeout_ms = 1000; } - ep = getenv("tftptimeoutcountmax"); + ep = env_get("tftptimeoutcountmax"); if (ep != NULL) tftp_timeout_count_max = simple_strtol(ep, NULL, 10); @@ -822,10 +822,10 @@ void tftp_start(enum proto_t protocol) tftp_our_port = 1024 + (get_timer(0) % 3072); #ifdef CONFIG_TFTP_PORT - ep = getenv("tftpdstp"); + ep = env_get("tftpdstp"); if (ep != NULL) tftp_remote_port = simple_strtol(ep, NULL, 10); - ep = getenv("tftpsrcp"); + ep = env_get("tftpsrcp"); if (ep != NULL) tftp_our_port = simple_strtol(ep, NULL, 10); #endif diff --git a/post/post.c b/post/post.c index 8c2c822acb..8fef0c3412 100644 --- a/post/post.c +++ b/post/post.c @@ -180,7 +180,7 @@ static void post_get_env_flags(int *test_flags) int i, j; for (i = 0; i < varnum; i++) { - if (getenv_f(var[i], list, sizeof(list)) <= 0) + if (env_get_f(var[i], list, sizeof(list)) <= 0) continue; for (j = 0; j < post_list_size; j++) diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index ac3c2c7f13..3ba00077d3 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -69,10 +69,10 @@ libs-y += common/init/ # Special handling for a few options which support SPL/TPL ifeq ($(CONFIG_TPL_BUILD),y) -libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ +libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/ libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/ else -libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ +libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/ libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ endif @@ -98,15 +98,22 @@ endif u-boot-spl-init := $(head-y) u-boot-spl-main := $(libs-y) -ifdef CONFIG_SPL_OF_PLATDATA +ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA u-boot-spl-platdata := $(obj)/dts/dt-platdata.o endif # Linker Script -ifdef CONFIG_SPL_LDSCRIPT +# First test whether there's a linker-script for the specific stage defined... +ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),) +# need to strip off double quotes +LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%)) +else +# ...then fall back to the generic SPL linker-script +ifneq ($(CONFIG_SPL_LDSCRIPT),) # need to strip off double quotes LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%)) endif +endif ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds @@ -202,7 +209,7 @@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@ quiet_cmd_copy = COPY $@ cmd_copy = cp $< $@ -ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy) +ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy) $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \ $(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \ $(obj)/$(SPL_BIN).dtb FORCE @@ -293,9 +300,15 @@ LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker) +# First try the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL) +ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),) +LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE) +else +# And then fall back to just testing for SPL_TEXT_BASE, even if in TPL mode ifneq ($(CONFIG_SPL_TEXT_BASE),) LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) endif +endif MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 4689d6310f..db284571f7 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -133,7 +133,6 @@ CONFIG_ATA_ACPI CONFIG_ATI CONFIG_ATI_RADEON_FB CONFIG_ATM -CONFIG_ATMEL_DATAFLASH_SPI CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 @@ -185,9 +184,6 @@ CONFIG_BOARD_TAURUS CONFIG_BOARD_TYPES CONFIG_BOOGER CONFIG_BOOM -CONFIG_BOOTARGS -CONFIG_BOOTARGS_AXM -CONFIG_BOOTARGS_TAURUS CONFIG_BOOTBLOCK CONFIG_BOOTCOMMAND CONFIG_BOOTCOUNT_ALEN @@ -293,42 +289,6 @@ CONFIG_CM922T_XA10 CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT CONFIG_CMDLINE_TAG -CONFIG_CMD_MAX6957 -CONFIG_CMD_MEM -CONFIG_CMD_MFSL -CONFIG_CMD_MMC_SPI -CONFIG_CMD_MTDPARTS_SPREAD -CONFIG_CMD_ONENAND -CONFIG_CMD_PCA953X -CONFIG_CMD_PCA953X_INFO -CONFIG_CMD_PCI -CONFIG_CMD_PCI_ENUM -CONFIG_CMD_PCMCIA -CONFIG_CMD_PORTIO -CONFIG_CMD_READ -CONFIG_CMD_REGINFO -CONFIG_CMD_REISER -CONFIG_CMD_SANDBOX -CONFIG_CMD_SAVES -CONFIG_CMD_SCSI -CONFIG_CMD_SDRAM -CONFIG_CMD_SF_TEST -CONFIG_CMD_SH_ZIMAGEBOOT -CONFIG_CMD_SPL -CONFIG_CMD_SPL_NAND_OFS -CONFIG_CMD_SPL_WRITE_SIZE -CONFIG_CMD_STRINGS -CONFIG_CMD_SX151X -CONFIG_CMD_TCA642X -CONFIG_CMD_TERMINAL -CONFIG_CMD_TFTP -CONFIG_CMD_THOR_DOWNLOAD -CONFIG_CMD_TRACE -CONFIG_CMD_TSI148 -CONFIG_CMD_UNIVERSE -CONFIG_CMD_UUID -CONFIG_CMD_ZBOOT -CONFIG_CMD_ZFS CONFIG_CM_INIT CONFIG_CM_MULTIPLE_SSRAM CONFIG_CM_REMAP @@ -1596,7 +1556,6 @@ CONFIG_MXS_OCOTP CONFIG_MXS_SPI CONFIG_MX_CYCLIC CONFIG_MY_OPTION -CONFIG_NAND CONFIG_NANDFLASH_SIZE CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC CONFIG_NAND_ACTL @@ -1759,7 +1718,6 @@ CONFIG_PHY_ET1011C_TX_CLK_FIX CONFIG_PHY_ID CONFIG_PHY_INTERFACE_MODE CONFIG_PHY_IRAM_BASE -CONFIG_PHY_KSZ9031 CONFIG_PHY_M88E1111 CONFIG_PHY_MAX_ADDR CONFIG_PHY_MODE_NEED_CHANGE @@ -2244,7 +2202,6 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_JR0_LIODN_NS CONFIG_SPL_JR0_LIODN_S -CONFIG_SPL_LDSCRIPT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MAX_FOOTPRINT CONFIG_SPL_MAX_PEB_SIZE @@ -2360,8 +2317,6 @@ CONFIG_SUPPORT_EMMC_RPMB CONFIG_SUPPORT_RAW_INITRD CONFIG_SUPPORT_VFAT CONFIG_SUVD3 -CONFIG_SX151X_GPIO_COUNT_8 -CONFIG_SX151X_SPI_BUS CONFIG_SXNI855T CONFIG_SYSCOUNTER_TIMER CONFIG_SYSFLAGS_ADDR @@ -2674,7 +2629,6 @@ CONFIG_SYS_DA850_PLL1_PLLDIV3 CONFIG_SYS_DA850_PLL1_PLLM CONFIG_SYS_DA850_PLL1_POSTDIV CONFIG_SYS_DA850_SYSCFG_SUSPSRC -CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS2 CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 @@ -4388,11 +4342,7 @@ CONFIG_SYS_PCI_TBATR4 CONFIG_SYS_PCI_TBATR5 CONFIG_SYS_PCI_VIRT CONFIG_SYS_PCMCIA_ATTR_BASE -CONFIG_SYS_PCMCIA_CIS_WIN -CONFIG_SYS_PCMCIA_CIS_WIN_SIZE CONFIG_SYS_PCMCIA_IO_BASE -CONFIG_SYS_PCMCIA_IO_WIN -CONFIG_SYS_PCMCIA_IO_WIN_SIZE CONFIG_SYS_PCMCIA_MEM_ADDR CONFIG_SYS_PCMCIA_MEM_SIZE CONFIG_SYS_PCMCIA_PBR0 @@ -4948,7 +4898,6 @@ CONFIG_TI_KEYSTONE_SERDES CONFIG_TI_KSNAV CONFIG_TI_SPI_MMAP CONFIG_TMU_TIMER -CONFIG_TPL_DRIVERS_MISC_SUPPORT CONFIG_TPL_PAD_TO CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_TPS6586X_POWER @@ -5029,7 +4978,6 @@ CONFIG_UPDATE_TFTP CONFIG_UPDATE_TFTP_CNT_MAX CONFIG_UPDATE_TFTP_MSEC_MAX CONFIG_USART1 -CONFIG_USART3 CONFIG_USART_BASE CONFIG_USART_ID CONFIG_USBBOOTCOMMAND @@ -5139,7 +5087,6 @@ CONFIG_USB_MUSB_PIO_ONLY CONFIG_USB_MUSB_TIMEOUT CONFIG_USB_MUSB_TUSB6010 CONFIG_USB_MUSB_UDC -CONFIG_USB_MUSB_UDD CONFIG_USB_OHCI CONFIG_USB_OHCI_EP93XX CONFIG_USB_OHCI_LPC32XX @@ -5198,7 +5145,6 @@ CONFIG_VIDEO_MX3 CONFIG_VIDEO_MXS CONFIG_VIDEO_MXS_MODE_SYSTEM CONFIG_VIDEO_OMAP3 -CONFIG_VIDEO_ONBOARD CONFIG_VIDEO_STD_TIMINGS CONFIG_VIDEO_SUNXI CONFIG_VIDEO_VCXK diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 63d91e22ed..8564bedd1a 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -141,7 +141,11 @@ if $scm_only; then fi if test -e include/config/auto.conf; then - . include/config/auto.conf + # We are interested only in CONFIG_LOCALVERSION and + # CONFIG_LOCALVERSION_AUTO, so extract these in a safe + # way (i.e. w/o sourcing auto.conf) + CONFIG_LOCALVERSION=`cat include/config/auto.conf | awk -F '=' '/^CONFIG_LOCALVERSION=/ {print $2}'` + CONFIG_LOCALVERSION_AUTO=`cat include/config/auto.conf | awk -F '=' '/^CONFIG_LOCALVERSION_AUTO=/ {print $2}'` else echo "Error: kernelrelease not valid - run 'make prepare' to update it" exit 1 diff --git a/test/command_ut.c b/test/command_ut.c index 21283eb357..f76d52569d 100644 --- a/test/command_ut.c +++ b/test/command_ut.c @@ -19,16 +19,16 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* commands separated by \n */ run_command_list("setenv list 1\n setenv list ${list}1", -1, 0); - assert(!strcmp("11", getenv("list"))); + assert(!strcmp("11", env_get("list"))); /* command followed by \n and nothing else */ run_command_list("setenv list 1${list}\n", -1, 0); - assert(!strcmp("111", getenv("list"))); + assert(!strcmp("111", env_get("list"))); /* a command string with \0 in it. Stuff after \0 should be ignored */ run_command("setenv list", 0); run_command_list(test_cmd, sizeof(test_cmd), 0); - assert(!strcmp("123", getenv("list"))); + assert(!strcmp("123", env_get("list"))); /* * a command list where we limit execution to only the first command @@ -36,7 +36,7 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) */ run_command_list("setenv list 1\n setenv list ${list}2; " "setenv list ${list}3", strlen("setenv list 1"), 0); - assert(!strcmp("1", getenv("list"))); + assert(!strcmp("1", env_get("list"))); assert(run_command("false", 0) == 1); assert(run_command("echo", 0) == 0); @@ -46,10 +46,10 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_HUSH_PARSER run_command("setenv foo 'setenv black 1\nsetenv adder 2'", 0); run_command("run foo", 0); - assert(getenv("black") != NULL); - assert(!strcmp("1", getenv("black"))); - assert(getenv("adder") != NULL); - assert(!strcmp("2", getenv("adder"))); + assert(env_get("black") != NULL); + assert(!strcmp("1", env_get("black"))); + assert(env_get("adder") != NULL); + assert(!strcmp("2", env_get("adder"))); #endif assert(run_command("", 0) == 0); diff --git a/test/dm/eth.c b/test/dm/eth.c index 564ad36916..122fab924d 100644 --- a/test/dm/eth.c +++ b/test/dm/eth.c @@ -26,17 +26,17 @@ static int dm_test_eth(struct unit_test_state *uts) { net_ping_ip = string_to_ip("1.1.2.2"); - setenv("ethact", "eth@10002000"); + env_set("ethact", "eth@10002000"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10002000", getenv("ethact")); + ut_asserteq_str("eth@10002000", env_get("ethact")); - setenv("ethact", "eth@10003000"); + env_set("ethact", "eth@10003000"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10003000", getenv("ethact")); + ut_asserteq_str("eth@10003000", env_get("ethact")); - setenv("ethact", "eth@10004000"); + env_set("ethact", "eth@10004000"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10004000", getenv("ethact")); + ut_asserteq_str("eth@10004000", env_get("ethact")); return 0; } @@ -45,22 +45,22 @@ DM_TEST(dm_test_eth, DM_TESTF_SCAN_FDT); static int dm_test_eth_alias(struct unit_test_state *uts) { net_ping_ip = string_to_ip("1.1.2.2"); - setenv("ethact", "eth0"); + env_set("ethact", "eth0"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10002000", getenv("ethact")); + ut_asserteq_str("eth@10002000", env_get("ethact")); - setenv("ethact", "eth1"); + env_set("ethact", "eth1"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10004000", getenv("ethact")); + ut_asserteq_str("eth@10004000", env_get("ethact")); /* Expected to fail since eth2 is not defined in the device tree */ - setenv("ethact", "eth2"); + env_set("ethact", "eth2"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10002000", getenv("ethact")); + ut_asserteq_str("eth@10002000", env_get("ethact")); - setenv("ethact", "eth5"); + env_set("ethact", "eth5"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10003000", getenv("ethact")); + ut_asserteq_str("eth@10003000", env_get("ethact")); return 0; } @@ -71,16 +71,16 @@ static int dm_test_eth_prime(struct unit_test_state *uts) net_ping_ip = string_to_ip("1.1.2.2"); /* Expected to be "eth@10003000" because of ethprime variable */ - setenv("ethact", NULL); - setenv("ethprime", "eth5"); + env_set("ethact", NULL); + env_set("ethprime", "eth5"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10003000", getenv("ethact")); + ut_asserteq_str("eth@10003000", env_get("ethact")); /* Expected to be "eth@10002000" because it is first */ - setenv("ethact", NULL); - setenv("ethprime", NULL); + env_set("ethact", NULL); + env_set("ethprime", NULL); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10002000", getenv("ethact")); + ut_asserteq_str("eth@10002000", env_get("ethact")); return 0; } @@ -119,28 +119,28 @@ static int dm_test_eth_act(struct unit_test_state *uts) ut_assertok(device_remove(dev[i], DM_REMOVE_NORMAL)); /* Invalidate MAC address */ - strcpy(ethaddr[i], getenv(addrname[i])); + strcpy(ethaddr[i], env_get(addrname[i])); /* Must disable access protection for ethaddr before clearing */ - setenv(".flags", addrname[i]); - setenv(addrname[i], NULL); + env_set(".flags", addrname[i]); + env_set(addrname[i], NULL); } /* Set ethact to "eth@10002000" */ - setenv("ethact", ethname[0]); + env_set("ethact", ethname[0]); /* Segment fault might happen if something is wrong */ ut_asserteq(-ENODEV, net_loop(PING)); for (i = 0; i < DM_TEST_ETH_NUM; i++) { /* Restore the env */ - setenv(".flags", addrname[i]); - setenv(addrname[i], ethaddr[i]); + env_set(".flags", addrname[i]); + env_set(addrname[i], ethaddr[i]); /* Probe the device again */ ut_assertok(device_probe(dev[i])); } - setenv(".flags", NULL); - setenv("ethact", NULL); + env_set(".flags", NULL); + env_set("ethact", NULL); return 0; } @@ -150,15 +150,15 @@ DM_TEST(dm_test_eth_act, DM_TESTF_SCAN_FDT); static int _dm_test_eth_rotate1(struct unit_test_state *uts) { /* Make sure that the default is to rotate to the next interface */ - setenv("ethact", "eth@10004000"); + env_set("ethact", "eth@10004000"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10002000", getenv("ethact")); + ut_asserteq_str("eth@10002000", env_get("ethact")); /* If ethrotate is no, then we should fail on a bad MAC */ - setenv("ethact", "eth@10004000"); - setenv("ethrotate", "no"); + env_set("ethact", "eth@10004000"); + env_set("ethrotate", "no"); ut_asserteq(-EINVAL, net_loop(PING)); - ut_asserteq_str("eth@10004000", getenv("ethact")); + ut_asserteq_str("eth@10004000", env_get("ethact")); return 0; } @@ -166,14 +166,14 @@ static int _dm_test_eth_rotate1(struct unit_test_state *uts) static int _dm_test_eth_rotate2(struct unit_test_state *uts) { /* Make sure we can skip invalid devices */ - setenv("ethact", "eth@10004000"); + env_set("ethact", "eth@10004000"); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10004000", getenv("ethact")); + ut_asserteq_str("eth@10004000", env_get("ethact")); /* Make sure we can handle device name which is not eth# */ - setenv("ethact", "sbe5"); + env_set("ethact", "sbe5"); ut_assertok(net_loop(PING)); - ut_asserteq_str("sbe5", getenv("ethact")); + ut_asserteq_str("sbe5", env_get("ethact")); return 0; } @@ -187,31 +187,31 @@ static int dm_test_eth_rotate(struct unit_test_state *uts) net_ping_ip = string_to_ip("1.1.2.2"); /* Invalidate eth1's MAC address */ - strcpy(ethaddr, getenv("eth1addr")); + strcpy(ethaddr, env_get("eth1addr")); /* Must disable access protection for eth1addr before clearing */ - setenv(".flags", "eth1addr"); - setenv("eth1addr", NULL); + env_set(".flags", "eth1addr"); + env_set("eth1addr", NULL); retval = _dm_test_eth_rotate1(uts); /* Restore the env */ - setenv("eth1addr", ethaddr); - setenv("ethrotate", NULL); + env_set("eth1addr", ethaddr); + env_set("ethrotate", NULL); if (!retval) { /* Invalidate eth0's MAC address */ - strcpy(ethaddr, getenv("ethaddr")); + strcpy(ethaddr, env_get("ethaddr")); /* Must disable access protection for ethaddr before clearing */ - setenv(".flags", "ethaddr"); - setenv("ethaddr", NULL); + env_set(".flags", "ethaddr"); + env_set("ethaddr", NULL); retval = _dm_test_eth_rotate2(uts); /* Restore the env */ - setenv("ethaddr", ethaddr); + env_set("ethaddr", ethaddr); } /* Restore the env */ - setenv(".flags", NULL); + env_set(".flags", NULL); return retval; } @@ -225,21 +225,21 @@ static int _dm_test_net_retry(struct unit_test_state *uts) * the active device should be eth0 */ sandbox_eth_disable_response(1, true); - setenv("ethact", "eth@10004000"); - setenv("netretry", "yes"); + env_set("ethact", "eth@10004000"); + env_set("netretry", "yes"); sandbox_eth_skip_timeout(); ut_assertok(net_loop(PING)); - ut_asserteq_str("eth@10002000", getenv("ethact")); + ut_asserteq_str("eth@10002000", env_get("ethact")); /* * eth1 is disabled and netretry is no, so the ping should fail and the * active device should be eth1 */ - setenv("ethact", "eth@10004000"); - setenv("netretry", "no"); + env_set("ethact", "eth@10004000"); + env_set("netretry", "no"); sandbox_eth_skip_timeout(); ut_asserteq(-ETIMEDOUT, net_loop(PING)); - ut_asserteq_str("eth@10004000", getenv("ethact")); + ut_asserteq_str("eth@10004000", env_get("ethact")); return 0; } @@ -253,7 +253,7 @@ static int dm_test_net_retry(struct unit_test_state *uts) retval = _dm_test_net_retry(uts); /* Restore the env */ - setenv("netretry", NULL); + env_set("netretry", NULL); sandbox_eth_disable_response(1, false); return retval; diff --git a/test/image/test-fit.py b/test/image/test-fit.py deleted file mode 100755 index b0d0538919..0000000000 --- a/test/image/test-fit.py +++ /dev/null @@ -1,481 +0,0 @@ -#!/usr/bin/python -# -# Copyright (c) 2013, Google Inc. -# -# Sanity check of the FIT handling in U-Boot -# -# SPDX-License-Identifier: GPL-2.0+ -# -# To run this: -# -# make O=sandbox sandbox_config -# make O=sandbox -# ./test/image/test-fit.py -u sandbox/u-boot -# -# Note: The above testing requires the Python development package, typically -# called python-devel or something similar. - -import doctest -from optparse import OptionParser -import os -import shutil -import struct -import sys -import tempfile - -# Enable printing of all U-Boot output -DEBUG = True - -# The 'command' library in patman is convenient for running commands -base_path = os.path.dirname(sys.argv[0]) -patman = os.path.join(base_path, '../../tools/patman') -sys.path.append(patman) - -import command - -# Define a base ITS which we can adjust using % and a dictionary -base_its = ''' -/dts-v1/; - -/ { - description = "Chrome OS kernel image with one or more FDT blobs"; - #address-cells = <1>; - - images { - kernel@1 { - data = /incbin/("%(kernel)s"); - type = "kernel"; - arch = "sandbox"; - os = "linux"; - compression = "none"; - load = <0x40000>; - entry = <0x8>; - }; - kernel@2 { - data = /incbin/("%(loadables1)s"); - type = "kernel"; - arch = "sandbox"; - os = "linux"; - compression = "none"; - %(loadables1_load)s - entry = <0x0>; - }; - fdt@1 { - description = "snow"; - data = /incbin/("u-boot.dtb"); - type = "flat_dt"; - arch = "sandbox"; - %(fdt_load)s - compression = "none"; - signature@1 { - algo = "sha1,rsa2048"; - key-name-hint = "dev"; - }; - }; - ramdisk@1 { - description = "snow"; - data = /incbin/("%(ramdisk)s"); - type = "ramdisk"; - arch = "sandbox"; - os = "linux"; - %(ramdisk_load)s - compression = "none"; - }; - ramdisk@2 { - description = "snow"; - data = /incbin/("%(loadables2)s"); - type = "ramdisk"; - arch = "sandbox"; - os = "linux"; - %(loadables2_load)s - compression = "none"; - }; - }; - configurations { - default = "conf@1"; - conf@1 { - kernel = "kernel@1"; - fdt = "fdt@1"; - %(ramdisk_config)s - %(loadables_config)s - }; - }; -}; -''' - -# Define a base FDT - currently we don't use anything in this -base_fdt = ''' -/dts-v1/; - -/ { - model = "Sandbox Verified Boot Test"; - compatible = "sandbox"; - - reset@0 { - compatible = "sandbox,reset"; - }; - -}; -''' - -# This is the U-Boot script that is run for each test. First load the FIT, -# then run the 'bootm' command, then save out memory from the places where -# we expect 'bootm' to write things. Then quit. -base_script = ''' -sb load hostfs 0 %(fit_addr)x %(fit)s -fdt addr %(fit_addr)x -bootm start %(fit_addr)x -bootm loados -sb save hostfs 0 %(kernel_addr)x %(kernel_out)s %(kernel_size)x -sb save hostfs 0 %(fdt_addr)x %(fdt_out)s %(fdt_size)x -sb save hostfs 0 %(ramdisk_addr)x %(ramdisk_out)s %(ramdisk_size)x -sb save hostfs 0 %(loadables1_addr)x %(loadables1_out)s %(loadables1_size)x -sb save hostfs 0 %(loadables2_addr)x %(loadables2_out)s %(loadables2_size)x -reset -''' - -def debug_stdout(stdout): - if DEBUG: - print stdout - -def make_fname(leaf): - """Make a temporary filename - - Args: - leaf: Leaf name of file to create (within temporary directory) - Return: - Temporary filename - """ - global base_dir - - return os.path.join(base_dir, leaf) - -def filesize(fname): - """Get the size of a file - - Args: - fname: Filename to check - Return: - Size of file in bytes - """ - return os.stat(fname).st_size - -def read_file(fname): - """Read the contents of a file - - Args: - fname: Filename to read - Returns: - Contents of file as a string - """ - with open(fname, 'r') as fd: - return fd.read() - -def make_dtb(): - """Make a sample .dts file and compile it to a .dtb - - Returns: - Filename of .dtb file created - """ - src = make_fname('u-boot.dts') - dtb = make_fname('u-boot.dtb') - with open(src, 'w') as fd: - print >>fd, base_fdt - command.Output('dtc', src, '-O', 'dtb', '-o', dtb) - return dtb - -def make_its(params): - """Make a sample .its file with parameters embedded - - Args: - params: Dictionary containing parameters to embed in the %() strings - Returns: - Filename of .its file created - """ - its = make_fname('test.its') - with open(its, 'w') as fd: - print >>fd, base_its % params - return its - -def make_fit(mkimage, params): - """Make a sample .fit file ready for loading - - This creates a .its script with the selected parameters and uses mkimage to - turn this into a .fit image. - - Args: - mkimage: Filename of 'mkimage' utility - params: Dictionary containing parameters to embed in the %() strings - Return: - Filename of .fit file created - """ - fit = make_fname('test.fit') - its = make_its(params) - command.Output(mkimage, '-f', its, fit) - with open(make_fname('u-boot.dts'), 'w') as fd: - print >>fd, base_fdt - return fit - -def make_kernel(filename, text): - """Make a sample kernel with test data - - Args: - filename: the name of the file you want to create - Returns: - Full path and filename of the kernel it created - """ - fname = make_fname(filename) - data = '' - for i in range(100): - data += 'this %s %d is unlikely to boot\n' % (text, i) - with open(fname, 'w') as fd: - print >>fd, data - return fname - -def make_ramdisk(filename, text): - """Make a sample ramdisk with test data - - Returns: - Filename of ramdisk created - """ - fname = make_fname(filename) - data = '' - for i in range(100): - data += '%s %d was seldom used in the middle ages\n' % (text, i) - with open(fname, 'w') as fd: - print >>fd, data - return fname - -def find_matching(text, match): - """Find a match in a line of text, and return the unmatched line portion - - This is used to extract a part of a line from some text. The match string - is used to locate the line - we use the first line that contains that - match text. - - Once we find a match, we discard the match string itself from the line, - and return what remains. - - TODO: If this function becomes more generally useful, we could change it - to use regex and return groups. - - Args: - text: Text to check (each line separated by \n) - match: String to search for - Return: - String containing unmatched portion of line - Exceptions: - ValueError: If match is not found - - >>> find_matching('first line:10\\nsecond_line:20', 'first line:') - '10' - >>> find_matching('first line:10\\nsecond_line:20', 'second line') - Traceback (most recent call last): - ... - ValueError: Test aborted - >>> find_matching('first line:10\\nsecond_line:20', 'second_line:') - '20' - """ - for line in text.splitlines(): - pos = line.find(match) - if pos != -1: - return line[:pos] + line[pos + len(match):] - - print "Expected '%s' but not found in output:" - print text - raise ValueError('Test aborted') - -def set_test(name): - """Set the name of the current test and print a message - - Args: - name: Name of test - """ - global test_name - - test_name = name - print name - -def fail(msg, stdout): - """Raise an error with a helpful failure message - - Args: - msg: Message to display - """ - print stdout - raise ValueError("Test '%s' failed: %s" % (test_name, msg)) - -def run_fit_test(mkimage, u_boot): - """Basic sanity check of FIT loading in U-Boot - - TODO: Almost everything: - - hash algorithms - invalid hash/contents should be detected - - signature algorithms - invalid sig/contents should be detected - - compression - - checking that errors are detected like: - - image overwriting - - missing images - - invalid configurations - - incorrect os/arch/type fields - - empty data - - images too large/small - - invalid FDT (e.g. putting a random binary in instead) - - default configuration selection - - bootm command line parameters should have desired effect - - run code coverage to make sure we are testing all the code - """ - global test_name - - # Set up invariant files - control_dtb = make_dtb() - kernel = make_kernel('test-kernel.bin', 'kernel') - ramdisk = make_ramdisk('test-ramdisk.bin', 'ramdisk') - loadables1 = make_kernel('test-loadables1.bin', 'lenrek') - loadables2 = make_ramdisk('test-loadables2.bin', 'ksidmar') - kernel_out = make_fname('kernel-out.bin') - fdt_out = make_fname('fdt-out.dtb') - ramdisk_out = make_fname('ramdisk-out.bin') - loadables1_out = make_fname('loadables1-out.bin') - loadables2_out = make_fname('loadables2-out.bin') - - # Set up basic parameters with default values - params = { - 'fit_addr' : 0x1000, - - 'kernel' : kernel, - 'kernel_out' : kernel_out, - 'kernel_addr' : 0x40000, - 'kernel_size' : filesize(kernel), - - 'fdt_out' : fdt_out, - 'fdt_addr' : 0x80000, - 'fdt_size' : filesize(control_dtb), - 'fdt_load' : '', - - 'ramdisk' : ramdisk, - 'ramdisk_out' : ramdisk_out, - 'ramdisk_addr' : 0xc0000, - 'ramdisk_size' : filesize(ramdisk), - 'ramdisk_load' : '', - 'ramdisk_config' : '', - - 'loadables1' : loadables1, - 'loadables1_out' : loadables1_out, - 'loadables1_addr' : 0x100000, - 'loadables1_size' : filesize(loadables1), - 'loadables1_load' : '', - - 'loadables2' : loadables2, - 'loadables2_out' : loadables2_out, - 'loadables2_addr' : 0x140000, - 'loadables2_size' : filesize(loadables2), - 'loadables2_load' : '', - - 'loadables_config' : '', - } - - # Make a basic FIT and a script to load it - fit = make_fit(mkimage, params) - params['fit'] = fit - cmd = base_script % params - - # First check that we can load a kernel - # We could perhaps reduce duplication with some loss of readability - set_test('Kernel load') - stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd) - debug_stdout(stdout) - if read_file(kernel) != read_file(kernel_out): - fail('Kernel not loaded', stdout) - if read_file(control_dtb) == read_file(fdt_out): - fail('FDT loaded but should be ignored', stdout) - if read_file(ramdisk) == read_file(ramdisk_out): - fail('Ramdisk loaded but should not be', stdout) - - # Find out the offset in the FIT where U-Boot has found the FDT - line = find_matching(stdout, 'Booting using the FDT blob at ') - fit_offset = int(line, 16) - params['fit_addr'] - fdt_magic = struct.pack('>L', 0xd00dfeed) - data = read_file(fit) - - # Now find where it actually is in the FIT (skip the first word) - real_fit_offset = data.find(fdt_magic, 4) - if fit_offset != real_fit_offset: - fail('U-Boot loaded FDT from offset %#x, FDT is actually at %#x' % - (fit_offset, real_fit_offset), stdout) - - # Now a kernel and an FDT - set_test('Kernel + FDT load') - params['fdt_load'] = 'load = <%#x>;' % params['fdt_addr'] - fit = make_fit(mkimage, params) - stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd) - debug_stdout(stdout) - if read_file(kernel) != read_file(kernel_out): - fail('Kernel not loaded', stdout) - if read_file(control_dtb) != read_file(fdt_out): - fail('FDT not loaded', stdout) - if read_file(ramdisk) == read_file(ramdisk_out): - fail('Ramdisk loaded but should not be', stdout) - - # Try a ramdisk - set_test('Kernel + FDT + Ramdisk load') - params['ramdisk_config'] = 'ramdisk = "ramdisk@1";' - params['ramdisk_load'] = 'load = <%#x>;' % params['ramdisk_addr'] - fit = make_fit(mkimage, params) - stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd) - debug_stdout(stdout) - if read_file(ramdisk) != read_file(ramdisk_out): - fail('Ramdisk not loaded', stdout) - - # Configuration with some Loadables - set_test('Kernel + FDT + Ramdisk load + Loadables') - params['loadables_config'] = 'loadables = "kernel@2", "ramdisk@2";' - params['loadables1_load'] = 'load = <%#x>;' % params['loadables1_addr'] - params['loadables2_load'] = 'load = <%#x>;' % params['loadables2_addr'] - fit = make_fit(mkimage, params) - stdout = command.Output(u_boot, '-d', control_dtb, '-c', cmd) - debug_stdout(stdout) - if read_file(loadables1) != read_file(loadables1_out): - fail('Loadables1 (kernel) not loaded', stdout) - if read_file(loadables2) != read_file(loadables2_out): - fail('Loadables2 (ramdisk) not loaded', stdout) - -def run_tests(): - """Parse options, run the FIT tests and print the result""" - global base_path, base_dir - - # Work in a temporary directory - base_dir = tempfile.mkdtemp() - parser = OptionParser() - parser.add_option('-u', '--u-boot', - default=os.path.join(base_path, 'u-boot'), - help='Select U-Boot sandbox binary') - parser.add_option('-k', '--keep', action='store_true', - help="Don't delete temporary directory even when tests pass") - parser.add_option('-t', '--selftest', action='store_true', - help='Run internal self tests') - (options, args) = parser.parse_args() - - # Find the path to U-Boot, and assume mkimage is in its tools/mkimage dir - base_path = os.path.dirname(options.u_boot) - mkimage = os.path.join(base_path, 'tools/mkimage') - - # There are a few doctests - handle these here - if options.selftest: - doctest.testmod() - return - - title = 'FIT Tests' - print title, '\n', '=' * len(title) - - run_fit_test(mkimage, options.u_boot) - - print '\nTests passed' - print 'Caveat: this is only a sanity check - test coverage is poor' - - # Remove the temporary directory unless we are asked to keep it - if options.keep: - print "Output files are in '%s'" % base_dir - else: - shutil.rmtree(base_dir) - -run_tests() diff --git a/test/py/tests/test_fit.py b/test/py/tests/test_fit.py new file mode 100755 index 0000000000..7e6b96dae4 --- /dev/null +++ b/test/py/tests/test_fit.py @@ -0,0 +1,428 @@ +# Copyright (c) 2013, Google Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Sanity check of the FIT handling in U-Boot + +import os +import pytest +import struct +import u_boot_utils as util + +# Define a base ITS which we can adjust using % and a dictionary +base_its = ''' +/dts-v1/; + +/ { + description = "Chrome OS kernel image with one or more FDT blobs"; + #address-cells = <1>; + + images { + kernel@1 { + data = /incbin/("%(kernel)s"); + type = "kernel"; + arch = "sandbox"; + os = "linux"; + compression = "none"; + load = <0x40000>; + entry = <0x8>; + }; + kernel@2 { + data = /incbin/("%(loadables1)s"); + type = "kernel"; + arch = "sandbox"; + os = "linux"; + compression = "none"; + %(loadables1_load)s + entry = <0x0>; + }; + fdt@1 { + description = "snow"; + data = /incbin/("u-boot.dtb"); + type = "flat_dt"; + arch = "sandbox"; + %(fdt_load)s + compression = "none"; + signature@1 { + algo = "sha1,rsa2048"; + key-name-hint = "dev"; + }; + }; + ramdisk@1 { + description = "snow"; + data = /incbin/("%(ramdisk)s"); + type = "ramdisk"; + arch = "sandbox"; + os = "linux"; + %(ramdisk_load)s + compression = "none"; + }; + ramdisk@2 { + description = "snow"; + data = /incbin/("%(loadables2)s"); + type = "ramdisk"; + arch = "sandbox"; + os = "linux"; + %(loadables2_load)s + compression = "none"; + }; + }; + configurations { + default = "conf@1"; + conf@1 { + kernel = "kernel@1"; + fdt = "fdt@1"; + %(ramdisk_config)s + %(loadables_config)s + }; + }; +}; +''' + +# Define a base FDT - currently we don't use anything in this +base_fdt = ''' +/dts-v1/; + +/ { + model = "Sandbox Verified Boot Test"; + compatible = "sandbox"; + + reset@0 { + compatible = "sandbox,reset"; + }; + +}; +''' + +# This is the U-Boot script that is run for each test. First load the FIT, +# then run the 'bootm' command, then save out memory from the places where +# we expect 'bootm' to write things. Then quit. +base_script = ''' +sb load hostfs 0 %(fit_addr)x %(fit)s +fdt addr %(fit_addr)x +bootm start %(fit_addr)x +bootm loados +sb save hostfs 0 %(kernel_addr)x %(kernel_out)s %(kernel_size)x +sb save hostfs 0 %(fdt_addr)x %(fdt_out)s %(fdt_size)x +sb save hostfs 0 %(ramdisk_addr)x %(ramdisk_out)s %(ramdisk_size)x +sb save hostfs 0 %(loadables1_addr)x %(loadables1_out)s %(loadables1_size)x +sb save hostfs 0 %(loadables2_addr)x %(loadables2_out)s %(loadables2_size)x +''' + +@pytest.mark.boardspec('sandbox') +@pytest.mark.buildconfigspec('fit_signature') +def test_fit(u_boot_console): + def make_fname(leaf): + """Make a temporary filename + + Args: + leaf: Leaf name of file to create (within temporary directory) + Return: + Temporary filename + """ + + return os.path.join(cons.config.build_dir, leaf) + + def filesize(fname): + """Get the size of a file + + Args: + fname: Filename to check + Return: + Size of file in bytes + """ + return os.stat(fname).st_size + + def read_file(fname): + """Read the contents of a file + + Args: + fname: Filename to read + Returns: + Contents of file as a string + """ + with open(fname, 'r') as fd: + return fd.read() + + def make_dtb(): + """Make a sample .dts file and compile it to a .dtb + + Returns: + Filename of .dtb file created + """ + src = make_fname('u-boot.dts') + dtb = make_fname('u-boot.dtb') + with open(src, 'w') as fd: + print >> fd, base_fdt + util.run_and_log(cons, ['dtc', src, '-O', 'dtb', '-o', dtb]) + return dtb + + def make_its(params): + """Make a sample .its file with parameters embedded + + Args: + params: Dictionary containing parameters to embed in the %() strings + Returns: + Filename of .its file created + """ + its = make_fname('test.its') + with open(its, 'w') as fd: + print >> fd, base_its % params + return its + + def make_fit(mkimage, params): + """Make a sample .fit file ready for loading + + This creates a .its script with the selected parameters and uses mkimage to + turn this into a .fit image. + + Args: + mkimage: Filename of 'mkimage' utility + params: Dictionary containing parameters to embed in the %() strings + Return: + Filename of .fit file created + """ + fit = make_fname('test.fit') + its = make_its(params) + util.run_and_log(cons, [mkimage, '-f', its, fit]) + with open(make_fname('u-boot.dts'), 'w') as fd: + print >> fd, base_fdt + return fit + + def make_kernel(filename, text): + """Make a sample kernel with test data + + Args: + filename: the name of the file you want to create + Returns: + Full path and filename of the kernel it created + """ + fname = make_fname(filename) + data = '' + for i in range(100): + data += 'this %s %d is unlikely to boot\n' % (text, i) + with open(fname, 'w') as fd: + print >> fd, data + return fname + + def make_ramdisk(filename, text): + """Make a sample ramdisk with test data + + Returns: + Filename of ramdisk created + """ + fname = make_fname(filename) + data = '' + for i in range(100): + data += '%s %d was seldom used in the middle ages\n' % (text, i) + with open(fname, 'w') as fd: + print >> fd, data + return fname + + def find_matching(text, match): + """Find a match in a line of text, and return the unmatched line portion + + This is used to extract a part of a line from some text. The match string + is used to locate the line - we use the first line that contains that + match text. + + Once we find a match, we discard the match string itself from the line, + and return what remains. + + TODO: If this function becomes more generally useful, we could change it + to use regex and return groups. + + Args: + text: Text to check (list of strings, one for each command issued) + match: String to search for + Return: + String containing unmatched portion of line + Exceptions: + ValueError: If match is not found + + >>> find_matching(['first line:10', 'second_line:20'], 'first line:') + '10' + >>> find_matching(['first line:10', 'second_line:20'], 'second line') + Traceback (most recent call last): + ... + ValueError: Test aborted + >>> find_matching('first line:10\', 'second_line:20'], 'second_line:') + '20' + >>> find_matching('first line:10\', 'second_line:20\nthird_line:30'], + 'third_line:') + '30' + """ + __tracebackhide__ = True + for line in '\n'.join(text).splitlines(): + pos = line.find(match) + if pos != -1: + return line[:pos] + line[pos + len(match):] + + pytest.fail("Expected '%s' but not found in output") + + def check_equal(expected_fname, actual_fname, failure_msg): + """Check that a file matches its expected contents + + Args: + expected_fname: Filename containing expected contents + actual_fname: Filename containing actual contents + failure_msg: Message to print on failure + """ + expected_data = read_file(expected_fname) + actual_data = read_file(actual_fname) + assert expected_data == actual_data, failure_msg + + def check_not_equal(expected_fname, actual_fname, failure_msg): + """Check that a file does not match its expected contents + + Args: + expected_fname: Filename containing expected contents + actual_fname: Filename containing actual contents + failure_msg: Message to print on failure + """ + expected_data = read_file(expected_fname) + actual_data = read_file(actual_fname) + assert expected_data != actual_data, failure_msg + + def run_fit_test(mkimage): + """Basic sanity check of FIT loading in U-Boot + + TODO: Almost everything: + - hash algorithms - invalid hash/contents should be detected + - signature algorithms - invalid sig/contents should be detected + - compression + - checking that errors are detected like: + - image overwriting + - missing images + - invalid configurations + - incorrect os/arch/type fields + - empty data + - images too large/small + - invalid FDT (e.g. putting a random binary in instead) + - default configuration selection + - bootm command line parameters should have desired effect + - run code coverage to make sure we are testing all the code + """ + # Set up invariant files + control_dtb = make_dtb() + kernel = make_kernel('test-kernel.bin', 'kernel') + ramdisk = make_ramdisk('test-ramdisk.bin', 'ramdisk') + loadables1 = make_kernel('test-loadables1.bin', 'lenrek') + loadables2 = make_ramdisk('test-loadables2.bin', 'ksidmar') + kernel_out = make_fname('kernel-out.bin') + fdt_out = make_fname('fdt-out.dtb') + ramdisk_out = make_fname('ramdisk-out.bin') + loadables1_out = make_fname('loadables1-out.bin') + loadables2_out = make_fname('loadables2-out.bin') + + # Set up basic parameters with default values + params = { + 'fit_addr' : 0x1000, + + 'kernel' : kernel, + 'kernel_out' : kernel_out, + 'kernel_addr' : 0x40000, + 'kernel_size' : filesize(kernel), + + 'fdt_out' : fdt_out, + 'fdt_addr' : 0x80000, + 'fdt_size' : filesize(control_dtb), + 'fdt_load' : '', + + 'ramdisk' : ramdisk, + 'ramdisk_out' : ramdisk_out, + 'ramdisk_addr' : 0xc0000, + 'ramdisk_size' : filesize(ramdisk), + 'ramdisk_load' : '', + 'ramdisk_config' : '', + + 'loadables1' : loadables1, + 'loadables1_out' : loadables1_out, + 'loadables1_addr' : 0x100000, + 'loadables1_size' : filesize(loadables1), + 'loadables1_load' : '', + + 'loadables2' : loadables2, + 'loadables2_out' : loadables2_out, + 'loadables2_addr' : 0x140000, + 'loadables2_size' : filesize(loadables2), + 'loadables2_load' : '', + + 'loadables_config' : '', + } + + # Make a basic FIT and a script to load it + fit = make_fit(mkimage, params) + params['fit'] = fit + cmd = base_script % params + + # First check that we can load a kernel + # We could perhaps reduce duplication with some loss of readability + cons.config.dtb = control_dtb + cons.restart_uboot() + with cons.log.section('Kernel load'): + output = cons.run_command_list(cmd.splitlines()) + check_equal(kernel, kernel_out, 'Kernel not loaded') + check_not_equal(control_dtb, fdt_out, + 'FDT loaded but should be ignored') + check_not_equal(ramdisk, ramdisk_out, + 'Ramdisk loaded but should not be') + + # Find out the offset in the FIT where U-Boot has found the FDT + line = find_matching(output, 'Booting using the fdt blob at ') + fit_offset = int(line, 16) - params['fit_addr'] + fdt_magic = struct.pack('>L', 0xd00dfeed) + data = read_file(fit) + + # Now find where it actually is in the FIT (skip the first word) + real_fit_offset = data.find(fdt_magic, 4) + assert fit_offset == real_fit_offset, ( + 'U-Boot loaded FDT from offset %#x, FDT is actually at %#x' % + (fit_offset, real_fit_offset)) + + # Now a kernel and an FDT + with cons.log.section('Kernel + FDT load'): + params['fdt_load'] = 'load = <%#x>;' % params['fdt_addr'] + fit = make_fit(mkimage, params) + cons.restart_uboot() + output = cons.run_command_list(cmd.splitlines()) + check_equal(kernel, kernel_out, 'Kernel not loaded') + check_equal(control_dtb, fdt_out, 'FDT not loaded') + check_not_equal(ramdisk, ramdisk_out, + 'Ramdisk loaded but should not be') + + # Try a ramdisk + with cons.log.section('Kernel + FDT + Ramdisk load'): + params['ramdisk_config'] = 'ramdisk = "ramdisk@1";' + params['ramdisk_load'] = 'load = <%#x>;' % params['ramdisk_addr'] + fit = make_fit(mkimage, params) + cons.restart_uboot() + output = cons.run_command_list(cmd.splitlines()) + check_equal(ramdisk, ramdisk_out, 'Ramdisk not loaded') + + # Configuration with some Loadables + with cons.log.section('Kernel + FDT + Ramdisk load + Loadables'): + params['loadables_config'] = 'loadables = "kernel@2", "ramdisk@2";' + params['loadables1_load'] = ('load = <%#x>;' % + params['loadables1_addr']) + params['loadables2_load'] = ('load = <%#x>;' % + params['loadables2_addr']) + fit = make_fit(mkimage, params) + cons.restart_uboot() + output = cons.run_command_list(cmd.splitlines()) + check_equal(loadables1, loadables1_out, + 'Loadables1 (kernel) not loaded') + check_equal(loadables2, loadables2_out, + 'Loadables2 (ramdisk) not loaded') + + cons = u_boot_console + try: + # We need to use our own device tree file. Remember to restore it + # afterwards. + old_dtb = cons.config.dtb + mkimage = cons.config.build_dir + '/tools/mkimage' + run_fit_test(mkimage) + finally: + # Go back to the original U-Boot with the correct dtb. + cons.config.dtb = old_dtb + cons.restart_uboot() diff --git a/tools/Makefile b/tools/Makefile index 0743677dc8..a1790ebd59 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -37,7 +37,7 @@ hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo HOSTCFLAGS_bmp_logo.o := -pedantic hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc -envcrc-objs := envcrc.o lib/crc32.o common/env_embedded.o lib/sha1.o +envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr HOSTCFLAGS_gen_eth_addr.o := -pedantic @@ -225,7 +225,7 @@ HOSTCFLAGS_sha256.o := -pedantic quiet_cmd_wrap = WRAP $@ cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@ -$(obj)/lib/%.c $(obj)/common/%.c: +$(obj)/lib/%.c $(obj)/common/%.c $(obj)/env/%.c: $(call cmd,wrap) clean-dirs := lib common diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index c9c79e066d..e50c075559 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -468,7 +468,7 @@ int fw_env_write(char *name, char *value) * modified or deleted * */ -int fw_setenv(int argc, char *argv[], struct env_opts *opts) +int fw_env_set(int argc, char *argv[], struct env_opts *opts) { int i; size_t len; diff --git a/tools/env/fw_env.h b/tools/env/fw_env.h index 04bb64602b..2d37eb5053 100644 --- a/tools/env/fw_env.h +++ b/tools/env/fw_env.h @@ -44,7 +44,7 @@ int parse_aes_key(char *key, uint8_t *bin_key); int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts); /** - * fw_setenv() - adds or removes one variable to the environment + * fw_env_set() - adds or removes one variable to the environment * * @argc: number of strings in argv, argv[0] is variable name, * argc==1 means erase variable, argc > 1 means add a variable @@ -61,7 +61,7 @@ int fw_printenv(int argc, char *argv[], int value_only, struct env_opts *opts); * ERRORS: * EROFS - some variables ("ethaddr", "serial#") cannot be modified */ -int fw_setenv(int argc, char *argv[], struct env_opts *opts); +int fw_env_set(int argc, char *argv[], struct env_opts *opts); /** * fw_parse_script() - adds or removes multiple variables with a batch script diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c index b8bff264eb..6e278ca80b 100644 --- a/tools/env/fw_env_main.c +++ b/tools/env/fw_env_main.c @@ -78,7 +78,7 @@ void usage_printenv(void) "\n"); } -void usage_setenv(void) +void usage_env_set(void) { fprintf(stderr, "Usage: fw_setenv [OPTIONS]... [VARIABLE]...\n" @@ -142,7 +142,7 @@ static void parse_common_args(int argc, char *argv[]) env_opts.lockname = optarg; break; case 'h': - do_printenv ? usage_printenv() : usage_setenv(); + do_printenv ? usage_printenv() : usage_env_set(); exit(EXIT_SUCCESS); break; default: @@ -202,7 +202,7 @@ int parse_setenv_args(int argc, char *argv[]) /* ignore common options */ break; default: /* '?' */ - usage_setenv(); + usage_env_set(); exit(EXIT_FAILURE); break; } @@ -273,7 +273,7 @@ int main(int argc, char *argv[]) retval = EXIT_FAILURE; } else { if (!script_file) { - if (fw_setenv(argc, argv, &env_opts) != 0) + if (fw_env_set(argc, argv, &env_opts) != 0) retval = EXIT_FAILURE; } else { if (fw_parse_script(script_file, &env_opts) != 0) diff --git a/tools/rkcommon.c b/tools/rkcommon.c index 25b034028b..04e8272fd5 100644 --- a/tools/rkcommon.c +++ b/tools/rkcommon.c @@ -77,6 +77,7 @@ static struct spl_info spl_infos[] = { { "rk322x", "RK32", 0x8000 - 0x1000, false, false }, { "rk3288", "RK32", 0x8000, false, false }, { "rk3328", "RK32", 0x8000 - 0x1000, false, false }, + { "rk3368", "RK33", 0x8000 - 0x1000, false, true }, { "rk3399", "RK33", 0x30000 - 0x2000, false, true }, { "rv1108", "RK11", 0x1800, false, false}, }; |