summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/include/asm/arch-exynos/ehci.h14
-rw-r--r--board/samsung/arndale/arndale.c21
-rw-r--r--common/cmd_usb_mass_storage.c24
-rw-r--r--drivers/usb/gadget/fotg210.c15
-rw-r--r--drivers/usb/host/ehci-exynos.c41
-rw-r--r--include/configs/arndale.h4
-rw-r--r--include/usb_mass_storage.h3
7 files changed, 122 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h
index d79f25c0c3..d2d70bd82b 100644
--- a/arch/arm/include/asm/arch-exynos/ehci.h
+++ b/arch/arm/include/asm/arch-exynos/ehci.h
@@ -29,6 +29,20 @@
#define EHCICTRL_ENAINCR8 (1 << 27)
#define EHCICTRL_ENAINCR16 (1 << 26)
+#define HSIC_CTRL_REFCLKSEL (0x2)
+#define HSIC_CTRL_REFCLKSEL_MASK (0x3)
+#define HSIC_CTRL_REFCLKSEL_SHIFT (23)
+
+#define HSIC_CTRL_REFCLKDIV_12 (0x24)
+#define HSIC_CTRL_REFCLKDIV_MASK (0x7f)
+#define HSIC_CTRL_REFCLKDIV_SHIFT (16)
+
+#define HSIC_CTRL_SIDDQ (0x1 << 6)
+#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
+#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
+#define HSIC_CTRL_UTMISWRST (0x1 << 2)
+#define HSIC_CTRL_PHYSWRST (0x1 << 0)
+
/* Register map for PHY control */
struct exynos_usb_phy {
unsigned int usbphyctrl0;
diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c
index 052fecdd5b..9efc355dab 100644
--- a/board/samsung/arndale/arndale.c
+++ b/board/samsung/arndale/arndale.c
@@ -5,12 +5,33 @@
*/
#include <common.h>
+#include <usb.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/dwmmc.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/power.h>
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_USB_EHCI_EXYNOS
+int board_usb_init(int index, enum usb_init_type init)
+{
+ struct exynos5_gpio_part1 *gpio = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
+
+ /* Configure gpios for usb 3503 hub:
+ * disconnect, toggle reset and connect
+ */
+ s5p_gpio_direction_output(&gpio->d1, 7, 0);
+ s5p_gpio_direction_output(&gpio->x3, 5, 0);
+
+ s5p_gpio_direction_output(&gpio->x3, 5, 1);
+ s5p_gpio_direction_output(&gpio->d1, 7, 1);
+
+ return 0;
+}
+#endif
+
int board_init(void)
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c
index 99487f4d0f..5f557d5f85 100644
--- a/common/cmd_usb_mass_storage.c
+++ b/common/cmd_usb_mass_storage.c
@@ -42,6 +42,30 @@ int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
g_dnl_register("ums");
+ /* Timeout unit: seconds */
+ int cable_ready_timeout = UMS_CABLE_READY_TIMEOUT;
+
+ if (!usb_cable_connected()) {
+ puts("Please connect USB cable.\n");
+
+ while (!usb_cable_connected()) {
+ if (ctrlc()) {
+ puts("\rCTRL+C - Operation aborted.\n");
+ goto exit;
+ }
+ if (!cable_ready_timeout) {
+ puts("\rUSB cable not detected.\n" \
+ "Command exit.\n");
+ goto exit;
+ }
+
+ printf("\rAuto exit in: %.2d s.", cable_ready_timeout);
+ mdelay(1000);
+ cable_ready_timeout--;
+ }
+ puts("\r\n");
+ }
+
while (1) {
usb_gadget_handle_interrupts();
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
index 6e19db15fa..3acf6a1f41 100644
--- a/drivers/usb/gadget/fotg210.c
+++ b/drivers/usb/gadget/fotg210.c
@@ -245,6 +245,7 @@ static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
if (ep->id == 0) {
/* Wait until cx/ep0 fifo empty */
fotg210_cxwait(chip, CXFIFO_CXFIFOE);
+ udelay(1);
writel(DMAFIFO_CX, &regs->dma_fifo);
} else {
/* Wait until epx fifo empty */
@@ -847,6 +848,13 @@ int usb_gadget_handle_interrupts(void)
/* CX interrupts */
if (gisr & GISR_GRP0) {
st = readl(&regs->gisr0);
+ /*
+ * Write 1 and then 0 works for both W1C & RW.
+ *
+ * HW v1.11.0+: It's a W1C register (write 1 clear)
+ * HW v1.10.0-: It's a R/W register (write 0 clear)
+ */
+ writel(st & GISR0_CXABORT, &regs->gisr0);
writel(0, &regs->gisr0);
if (st & GISR0_CXERR)
@@ -873,6 +881,13 @@ int usb_gadget_handle_interrupts(void)
/* Device Status Interrupts */
if (gisr & GISR_GRP2) {
st = readl(&regs->gisr2);
+ /*
+ * Write 1 and then 0 works for both W1C & RW.
+ *
+ * HW v1.11.0+: It's a W1C register (write 1 clear)
+ * HW v1.10.0-: It's a R/W register (write 0 clear)
+ */
+ writel(st, &regs->gisr2);
writel(0, &regs->gisr2);
if (st & GISR2_RESET)
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 66b4de0b2d..9356878eb2 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -88,6 +88,8 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
+ u32 hsic_ctrl;
+
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
@@ -112,6 +114,32 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
+
+ /* HSIC Phy Setting */
+ hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_SIDDQ);
+
+ clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+ clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+ hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK)
+ << HSIC_CTRL_REFCLKDIV_SHIFT)
+ | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK)
+ << HSIC_CTRL_REFCLKSEL_SHIFT)
+ | HSIC_CTRL_UTMISWRST);
+
+ setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+ setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
+ udelay(10);
+
+ clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST |
+ HSIC_CTRL_UTMISWRST);
+
+ clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST |
+ HSIC_CTRL_UTMISWRST);
+
udelay(20);
/* EHCI Ctrl setting */
@@ -125,6 +153,8 @@ static void setup_usb_phy(struct exynos_usb_phy *usb)
/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
+ u32 hsic_ctrl;
+
/* HOST_PHY reset */
setbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_PHYSWRST |
@@ -133,6 +163,15 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
+ /* HSIC Phy reset */
+ hsic_ctrl = (HSIC_CTRL_FORCESUSPEND |
+ HSIC_CTRL_FORCESLEEP |
+ HSIC_CTRL_SIDDQ |
+ HSIC_CTRL_PHYSWRST);
+
+ setbits_le32(&usb->hsicphyctrl1, hsic_ctrl);
+ setbits_le32(&usb->hsicphyctrl2, hsic_ctrl);
+
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
@@ -164,6 +203,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
setup_usb_phy(ctx->usb);
+ board_usb_init(index, init);
+
*hccr = ctx->hcd;
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 7e367f39b2..9584d82af7 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -117,6 +117,10 @@
#define CONFIG_USB_EHCI_EXYNOS
#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
#define CONFIG_SPL
diff --git a/include/usb_mass_storage.h b/include/usb_mass_storage.h
index 9df3adcf2a..058dcf1174 100644
--- a/include/usb_mass_storage.h
+++ b/include/usb_mass_storage.h
@@ -20,6 +20,9 @@
#define UMS_NUM_SECTORS 0
#endif
+/* Wait at maximum 60 seconds for cable connection */
+#define UMS_CABLE_READY_TIMEOUT 60
+
struct ums {
int (*read_sector)(struct ums *ums_dev,
ulong start, lbaint_t blkcnt, void *buf);
generated by cgit (git 2.34.1) at 2024-12-30 22:36:38 +0000