diff options
53 files changed, 1423 insertions, 714 deletions
@@ -2,6 +2,22 @@ Changes since U-Boot 1.0.0: ====================================================================== +* Minor code cleanup (coding style) + +* Patch by Reinhard Meyer, 30 Dec 2003: + - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, + - added CONFIG_PHY_ADDR to include/configs/IceCube.h, + - turned debug print of PHY registers into a function (called in two places) + - added support for EMK MPC5200 based modules + +* Fix MPC8xx PLPRCR_MFD_SHIFT typo + +* Add support for TQM866M modules + +* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) + +* Fix a few compiler warnings + * Patch by Reinhard Meyer, 28 Dec 2003: Add initial support for TOP5200 board diff --git a/MAINTAINERS b/MAINTAINERS index 29084f6e16..875256479b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -180,7 +180,8 @@ Eran Man <eran@nbase.co.il> Reinhard Meyer <r.meyer@emk-elektronik.de> - TOP860 MPC860 + TOP860 MPC860T + TOP5200 MPC5200 Scott McNutt <smcnutt@artesyncp.com> @@ -25,7 +25,7 @@ LIST_5xx=" \ ######################################################################### LIST_5xxx=" \ - IceCube_5100 IceCube_5200 \ + IceCube_5100 IceCube_5200 EVAL5200 \ " ######################################################################### @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -204,6 +204,7 @@ cmi_mpc5xx_config: unconfig MPC5200LITE_config \ MPC5200LITE_LOWBOOT_config \ MPC5200LITE_LOWBOOT08_config \ +icecube_5200_DDR_LOWBOOT_config \ icecube_5200_DDR_config \ IceCube_5200_DDR_config \ icecube_5200_config \ @@ -218,20 +219,26 @@ IceCube_5100_config: unconfig { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ echo "... with 8 MB flash only" ; \ } - @[ -z "$(findstring 5200,$@)" ] || \ - { echo "#define CONFIG_MPC5200" >>include/config.h ; \ - echo "... with MPC5200 processor" ; \ - } @[ -z "$(findstring DDR,$@)" ] || \ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ echo "... DDR memory revision" ; \ } + @[ -z "$(findstring 5200,$@)" ] || \ + { echo "#define CONFIG_MPC5200" >>include/config.h ; \ + echo "... with MPC5200 processor" ; \ + } @[ -z "$(findstring 5100,$@)" ] || \ { echo "#define CONFIG_MGT5100" >>include/config.h ; \ echo "... with MGT5100 processor" ; \ } @./mkconfig -a IceCube ppc mpc5xxx icecube +MINI5200_config \ +EVAL5200_config \ +TOP5200_config: unconfig + @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h + @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk + ######################################################################### ## MPC8xx Systems ######################################################################### @@ -438,7 +445,7 @@ TOP860_config: unconfig # All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock, # but only 855 and 860 boards may come with FEC # and 823 boards may have LCD support -xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1))))) +xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _133MHz,,$(subst _LCD,,$(subst _config,,$1)))))) FPS850L_config \ FPS860L_config \ @@ -476,7 +483,12 @@ TQM860M_80MHz_config \ TQM862M_config \ TQM862M_66MHz_config \ TQM862M_80MHz_config \ -TQM862M_100MHz_config: unconfig +TQM862M_100MHz_config \ +TQM866M_config \ +TQM866M_66MHz_config \ +TQM866M_80MHz_config \ +TQM866M_100MHz_config \ +TQM866M_133MHz_config: unconfig @ >include/config.h @[ -z "$(findstring _66MHz,$@)" ] || \ { echo "#define CONFIG_66MHz" >>include/config.h ; \ @@ -490,6 +502,10 @@ TQM862M_100MHz_config: unconfig { echo "#define CONFIG_100MHz" >>include/config.h ; \ echo "... with 100MHz system clock" ; \ } + @[ -z "$(findstring _133MHz,$@)" ] || \ + { echo "#define CONFIG_133MHz" >>include/config.h ; \ + echo "... with 133MHz system clock" ; \ + } @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ @@ -490,10 +490,10 @@ The following options need to be configured: default i/o. Serial console can be forced with environment 'console=serial'. - When CONFIG_SILENT_CONSOLE is defined, all console - messages (by U-Boot and Linux!) can be silenced with - the "silent" environment variable. See - doc/README.silent for more information. + When CONFIG_SILENT_CONSOLE is defined, all console + messages (by U-Boot and Linux!) can be silenced with + the "silent" environment variable. See + doc/README.silent for more information. - Console Baudrate: CONFIG_BAUDRATE - in bps @@ -1472,16 +1472,16 @@ Modem Support: - Interrupt support (PPC): - There are common interrupt_init() and timer_interrupt() - for all PPC archs. interrupt_init() calls interrupt_init_cpu() - for cpu specific initialization. interrupt_init_cpu() - should set decrementer_count to appropriate value. If - cpu resets decrementer automatically after interrupt - (ppc4xx) it should set decrementer_count to zero. - timer_interrupt() calls timer_interrupt_cpu() for cpu - specific handling. If board has watchdog / status_led - / other_activity_monitor it works automatically from - general timer_interrupt(). + There are common interrupt_init() and timer_interrupt() + for all PPC archs. interrupt_init() calls interrupt_init_cpu() + for cpu specific initialization. interrupt_init_cpu() + should set decrementer_count to appropriate value. If + cpu resets decrementer automatically after interrupt + (ppc4xx) it should set decrementer_count to zero. + timer_interrupt() calls timer_interrupt_cpu() for cpu + specific handling. If board has watchdog / status_led + / other_activity_monitor it works automatically from + general timer_interrupt(). - General: @@ -1766,7 +1766,7 @@ to save the current settings. - CFG_ENV_IS_IN_DATAFLASH: - Define this if you have a DataFlash memory device which you + Define this if you have a DataFlash memory device which you want to use for the environment. - CFG_ENV_OFFSET: diff --git a/board/bubinga405ep/bubinga405ep.c b/board/bubinga405ep/bubinga405ep.c index 8694ebe904..f73b1662d1 100644 --- a/board/bubinga405ep/bubinga405ep.c +++ b/board/bubinga405ep/bubinga405ep.c @@ -79,7 +79,6 @@ int board_pre_init (void) int checkboard (void) { unsigned char *s = getenv ("serial#"); - unsigned char *e; puts ("Board: IBM 405EP Eval Board"); diff --git a/board/emk/top5200/config.mk b/board/emk/top5200/config.mk index 14af97a028..84131fef10 100644 --- a/board/emk/top5200/config.mk +++ b/board/emk/top5200/config.mk @@ -2,6 +2,9 @@ # (C) Copyright 2003 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# (C) Copyright 2003 +# Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de +# # See file CREDITS for list of people who contributed to this # project. # @@ -24,8 +27,15 @@ # # TOP5200 board, on optional MINI5200 and EVAL5200 boards # +# allowed and functional TEXT_BASE values: +# +# 0xff000000 low boot at 0x00000100 (default board setting) +# 0xfff00000 high boot at 0xfff00100 (board needs modification) +# 0x00100000 RAM load and test +# -TEXT_BASE = 0xfff00000 +TEXT_BASE = 0xff000000 +#TEXT_BASE = 0xfff00000 #TEXT_BASE = 0x00100000 PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/emk/top5200/flash.c b/board/emk/top5200/flash.c index b951b5f084..216bce3a88 100644 --- a/board/emk/top5200/flash.c +++ b/board/emk/top5200/flash.c @@ -2,6 +2,9 @@ * (C) Copyright 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * (C) Copyright 2003 + * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de + * * See file CREDITS for list of people who contributed to this * project. * @@ -51,7 +54,7 @@ static flash_info_t *flash_get_info(ulong base); unsigned long flash_init (void) { unsigned long size = 0; - int i; + int i = 0; extern void flash_preinit(void); extern void flash_afterinit(uint, ulong, ulong); ulong flashbase = CFG_FLASH_BASE; @@ -59,10 +62,10 @@ unsigned long flash_init (void) flash_preinit(); /* There is only ONE FLASH device */ - memset(&flash_info[0], 0, sizeof(flash_info_t)); - flash_info[0].size = - flash_get_size((FPW *)flashbase, &flash_info[0]); - size += flash_info[0].size; + memset(&flash_info[i], 0, sizeof(flash_info_t)); + flash_info[i].size = + flash_get_size((FPW *)flashbase, &flash_info[i]); + size += flash_info[i].size; #if CFG_MONITOR_BASE >= CFG_FLASH_BASE /* monitor protection ON by default */ @@ -81,7 +84,7 @@ unsigned long flash_init (void) #endif - flash_afterinit(0, flash_info[0].start[0], flash_info[0].size); + flash_afterinit(i, flash_info[i].start[0], flash_info[i].size); return size ? size : 1; } @@ -151,7 +154,8 @@ void flash_print_info (flash_info_t *info) if (info->flash_id & FLASH_BTYPE) { boottype = botboottype; bootletter = botbootletter; - } else { + } + else { boottype = topboottype; bootletter = topbootletter; } @@ -238,12 +242,17 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) info->flash_id += FLASH_AM160B; info->sector_count = 35; info->size = 0x00200000; +#ifdef CFG_LOWBOOT + offset = 0; +#else offset = 0x00e00000; +#endif info->start[0] = (ulong)addr + offset; info->start[1] = (ulong)addr + offset + 0x4000; info->start[2] = (ulong)addr + offset + 0x6000; info->start[3] = (ulong)addr + offset + 0x8000; - for (i = 4; i < info->sector_count; i++) { + for (i = 4; i < info->sector_count; i++) + { info->start[i] = (ulong)addr + offset + 0x10000 * (i-3); } break; @@ -252,8 +261,12 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) info->flash_id += FLASH_AMDLV065D; info->sector_count = 128; info->size = 0x00800000; +#ifdef CFG_LOWBOOT + offset = 0; +#else offset = 0x00800000; - for (i = 0; i < info->sector_count; i++) +#endif + for( i = 0; i < info->sector_count; i++ ) info->start[i] = (ulong)addr + offset + (i * 0x10000); break; /* => 8 or 16 MB */ diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c index 536a5152a6..3969e2aa12 100644 --- a/board/emk/top5200/top5200.c +++ b/board/emk/top5200/top5200.c @@ -36,8 +36,10 @@ long int initdram (int board_type) { ulong dramsize = 0; #ifndef CFG_RAMBOOT +#if 0 ulong t; ulong tap_del; +#endif #define MODE_EN 0x80000000 #define SOFT_PRE 2 @@ -73,16 +75,19 @@ long int initdram (int board_type) *(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24; #if 0 - for (tap_del = 0; tap_del < 32; tap_del++) { + for (tap_del = 0; tap_del < 32; tap_del++) + { *(vu_long *)MPC5XXX_CDM_PORCFG = tap_del << 24; printf ("\nTAP Delay:%x Filling DRAM...", *(vu_long *)MPC5XXX_CDM_PORCFG); for (t = 0; t < 0x04000000; t+=4) *(vu_long *) t = t; printf ("Checking DRAM...\n"); - for (t = 0; t < 0x04000000; t+=4) { + for (t = 0; t < 0x04000000; t+=4) + { ulong rval = *(vu_long *) t; - if (rval != t) { + if (rval != t) + { printf ("mismatch at %x: ", t); printf (" 1.read %x", rval); printf (" 2.read %x", *(vu_long *) t); diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index e0adec377e..27b7bab52e 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -126,7 +126,7 @@ long int initdram (int board_type) /* setup config registers */ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0x73722930; *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x47770000; - + /* set tap delay to 0x10 */ *(vu_long *)MPC5XXX_CDM_PORCFG = 0x10000000; #else diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S index 70d2885bca..b438484643 100644 --- a/board/incaip/memsetup.S +++ b/board/incaip/memsetup.S @@ -13,7 +13,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -27,35 +27,35 @@ #include <asm/regdef.h> -#define EBU_MODUL_BASE 0xB8000200 -#define EBU_CLC(value) 0x0000(value) -#define EBU_CON(value) 0x0010(value) -#define EBU_ADDSEL0(value) 0x0020(value) -#define EBU_ADDSEL1(value) 0x0024(value) -#define EBU_ADDSEL2(value) 0x0028(value) -#define EBU_BUSCON0(value) 0x0060(value) -#define EBU_BUSCON1(value) 0x0064(value) -#define EBU_BUSCON2(value) 0x0068(value) - -#define MC_MODUL_BASE 0xBF800000 -#define MC_ERRCAUSE(value) 0x0100(value) -#define MC_ERRADDR(value) 0x0108(value) -#define MC_IOGP(value) 0x0800(value) -#define MC_SELFRFSH(value) 0x0A00(value) -#define MC_CTRLENA(value) 0x1000(value) -#define MC_MRSCODE(value) 0x1008(value) -#define MC_CFGDW(value) 0x1010(value) -#define MC_CFGPB0(value) 0x1018(value) -#define MC_LATENCY(value) 0x1038(value) -#define MC_TREFRESH(value) 0x1040(value) - -#define CGU_MODUL_BASE 0xBF107000 -#define CGU_PLL1CR(value) 0x0008(value) -#define CGU_DIVCR(value) 0x0010(value) -#define CGU_MUXCR(value) 0x0014(value) -#define CGU_PLL1SR(value) 0x000C(value) - - .set noreorder +#define EBU_MODUL_BASE 0xB8000200 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0100(value) +#define MC_ERRADDR(value) 0x0108(value) +#define MC_IOGP(value) 0x0800(value) +#define MC_SELFRFSH(value) 0x0A00(value) +#define MC_CTRLENA(value) 0x1000(value) +#define MC_MRSCODE(value) 0x1008(value) +#define MC_CFGDW(value) 0x1010(value) +#define MC_CFGPB0(value) 0x1018(value) +#define MC_LATENCY(value) 0x1038(value) +#define MC_TREFRESH(value) 0x1040(value) + +#define CGU_MODUL_BASE 0xBF107000 +#define CGU_PLL1CR(value) 0x0008(value) +#define CGU_DIVCR(value) 0x0010(value) +#define CGU_MUXCR(value) 0x0014(value) +#define CGU_PLL1SR(value) 0x000C(value) + + .set noreorder /* @@ -234,4 +234,3 @@ memsetup: j ra nop .end memsetup - diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index 17871d2a1b..9c98c93b54 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -54,7 +54,7 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ static image_header_t header; -static int +static int mpl_prg(uchar *src, ulong size) { ulong start; @@ -105,7 +105,6 @@ mpl_prg(uchar *src, ulong size) flash_perror(rc); return (1); } - #elif defined(CONFIG_VCMA9) start = 0; @@ -125,7 +124,8 @@ mpl_prg(uchar *src, ulong size) } #endif - printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",src,size); + printf("flash erased, programming from 0x%lx 0x%lx Bytes\n", + (ulong)src, size); if ((rc = flash_write (src, start, size)) != 0) { puts("ERROR "); flash_perror(rc); @@ -136,14 +136,14 @@ mpl_prg(uchar *src, ulong size) } -static int +static int mpl_prg_image(uchar *ld_addr) { unsigned long len, checksum; uchar *data; image_header_t *hdr = &header; int rc; - + /* Copy header so we can blank CRC field for re-calculation */ memcpy (&header, (char *)ld_addr, sizeof(image_header_t)); if (ntohl(hdr->ih_magic) != IH_MAGIC) { @@ -183,7 +183,7 @@ mpl_prg_image(uchar *ld_addr) puts("Insufficient space for decompression\n"); return 1; } - + switch (hdr->ih_comp) { case IH_COMP_GZIP: puts("Uncompressing (GZIP) ... "); @@ -217,13 +217,13 @@ mpl_prg_image(uchar *ld_addr) free(buf); return 1; } - + rc = mpl_prg(buf, len); free(buf); } else { rc = mpl_prg(data, len); } - + return(rc); } @@ -445,7 +445,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ld_addr=CFG_LOAD_ADDR; result=do_fdcboot(cmdtp, 0, 1, local_args); } - result=mpl_prg_image(ld_addr); + result=mpl_prg_image((uchar *)ld_addr); return result; } #endif /* (CONFIG_COMMANDS & CFG_CMD_FDC) */ diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c index 6827a23656..0cec63f59a 100644 --- a/board/mvblue/mvblue.c +++ b/board/mvblue/mvblue.c @@ -11,80 +11,86 @@ #include <ns16550.h> #ifdef CONFIG_PCI - #include <pci.h> +#include <pci.h> #endif -u32 get_BoardType(void); +u32 get_BoardType (void); #define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \ - | ((d&0x1f)<<11) \ - | ((f&0x7)<<7) \ - | (r&0xfc) ) + | ((d&0x1f)<<11) \ + | ((f&0x7)<<7) \ + | (r&0xfc) ) -int mv_pci_read( int bus, int dev, int func, int reg ) +int mv_pci_read (int bus, int dev, int func, int reg) { - *(u32*)(0xfec00cf8) = PCI_CONFIG(bus,dev,func,reg); - asm("sync"); - return cpu_to_le32( *(u32*)(0xfee00cfc) ); + *(u32 *) (0xfec00cf8) = PCI_CONFIG (bus, dev, func, reg); + asm ("sync"); + return cpu_to_le32 (*(u32 *) (0xfee00cfc)); } -u32 get_BoardType() { - return ( mv_pci_read(0,0xe,0,0) == 0x06801095 ? 0 : 1 ); + +u32 get_BoardType () +{ + return (mv_pci_read (0, 0xe, 0, 0) == 0x06801095 ? 0 : 1); } -void init_2nd_DUART(void) +void init_2nd_DUART (void) { - NS16550_t console = (NS16550_t)CFG_NS16550_COM2; + NS16550_t console = (NS16550_t) CFG_NS16550_COM2; int clock_divisor = CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE; - *(u8*)(0xfc004511) = 0x1; - NS16550_init(console, clock_divisor); + + *(u8 *) (0xfc004511) = 0x1; + NS16550_init (console, clock_divisor); } -void hw_watchdog_reset(void) +void hw_watchdog_reset (void) { - if (get_BoardType() == 0 ) { - *(u32*)(0xff000005) = 0; - asm("sync"); + if (get_BoardType () == 0) { + *(u32 *) (0xff000005) = 0; + asm ("sync"); } } int checkboard (void) { DECLARE_GLOBAL_DATA_PTR; - ulong busfreq = get_bus_freq(0); - char buf[32]; - u32 BoardType = get_BoardType(); + ulong busfreq = get_bus_freq (0); + char buf[32]; + u32 BoardType = get_BoardType (); char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" }; char *p; bd_t *bd = gd->bd; - hw_watchdog_reset(); + hw_watchdog_reset (); + + printf ("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION); + printf (" Found %s running at %s MHz memory clock.\n", + BoardName[BoardType], strmhz (buf, busfreq)); - printf("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION); - printf(" Found %s running at %s MHz memory clock.\n", BoardName[BoardType], strmhz(buf, busfreq) ); + init_2nd_DUART (); - init_2nd_DUART(); + if ((p = getenv ("console_nr")) != NULL) { + unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3; - if ( (p = getenv("console_nr")) != NULL ) { - unsigned long con_nr = simple_strtoul( p, NULL, 10) & 3; - bd->bi_baudrate &= ~3; - bd->bi_baudrate |= con_nr & 3; + bd->bi_baudrate &= ~3; + bd->bi_baudrate |= con_nr & 3; } return 0; } long int initdram (int board_type) { - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; + int i, cnt; + volatile uchar *base = CFG_SDRAM_BASE; + volatile ulong *addr; + ulong save[32]; + ulong val, ret = 0; + + for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0; + cnt >>= 1) { + addr = (volatile ulong *) base + cnt; save[i++] = *addr; *addr = ~cnt; } - addr = (volatile ulong *)base; + addr = (volatile ulong *) base; save[i] = *addr; *addr = 0; @@ -93,102 +99,113 @@ long int initdram (int board_type) goto Done; } - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; + for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) { + addr = (volatile ulong *) base + cnt; val = *addr; *addr = save[--i]; if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + ulong new_bank0_end = cnt * sizeof (long) - 1; + ulong mear1 = mpc824x_mpc107_getreg (MEAR1); + ulong emear1 = mpc824x_mpc107_getreg (EMEAR1); + + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> + MICR_ADDR_SHIFT); emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - ret = cnt * sizeof(long); + ((new_bank0_end & MICR_ADDR_MASK) >> + MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg (MEAR1, mear1); + mpc824x_mpc107_setreg (EMEAR1, emear1); + ret = cnt * sizeof (long); goto Done; } } ret = CFG_MAX_RAM_SIZE; -Done: + Done: return ret; } /* ------------------------------------------------------------------------- */ -u8 *dhcp_vendorex_prep(u8 *e) +u8 *dhcp_vendorex_prep (u8 * e) { -char *ptr; + char *ptr; /* DHCP vendor-class-identifier = 60 */ - if ((ptr = getenv("dhcp_vendor-class-identifier"))) { - *e++ = 60; - *e++ = strlen(ptr); - while (*ptr) - *e++ = *ptr++; - } + if ((ptr = getenv ("dhcp_vendor-class-identifier"))) { + *e++ = 60; + *e++ = strlen (ptr); + while (*ptr) + *e++ = *ptr++; + } /* my DHCP_CLIENT_IDENTIFIER = 61 */ - if ((ptr = getenv("dhcp_client_id"))) { - *e++ = 61; - *e++ = strlen(ptr); - while (*ptr) - *e++ = *ptr++; - } - return e; + if ((ptr = getenv ("dhcp_client_id"))) { + *e++ = 61; + *e++ = strlen (ptr); + while (*ptr) + *e++ = *ptr++; + } + return e; } -u8 *dhcp_vendorex_proc(u8 *popt) + +u8 *dhcp_vendorex_proc (u8 * popt) { - return NULL; + return NULL; } + /* ------------------------------------------------------------------------- */ /* * Initialize PCI Devices */ #ifdef CONFIG_PCI -void pci_mvblue_clear_base( struct pci_controller *hose, pci_dev_t dev ) +void pci_mvblue_clear_base (struct pci_controller *hose, pci_dev_t dev) { u32 cnt; - printf("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV(dev), PCI_FUNC(dev) ); - for( cnt = 0; cnt < 6; cnt++ ) - pci_hose_write_config_dword( hose, dev, 0x10 + (4*cnt), 0x0 ); - printf("done\n"); + + printf ("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV (dev), + PCI_FUNC (dev)); + for (cnt = 0; cnt < 6; cnt++) + pci_hose_write_config_dword (hose, dev, 0x10 + (4 * cnt), + 0x0); + printf ("done\n"); } -void duart_setup( u32 base, u16 divisor ) +void duart_setup (u32 base, u16 divisor) { - printf("duart setup ..."); - out_8( (u8*)( CFG_ISA_IO+base+3), 0x80); - out_8( (u8*)( CFG_ISA_IO+base+0), divisor & 0xff); - out_8( (u8*)( CFG_ISA_IO+base+1), divisor >> 8 ); - out_8( (u8*)( CFG_ISA_IO+base+3), 0x03); - out_8( (u8*)( CFG_ISA_IO+base+4), 0x03); - out_8( (u8*)( CFG_ISA_IO+base+2), 0x07); - printf("done\n"); + printf ("duart setup ..."); + out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x80); + out_8 ((u8 *) (CFG_ISA_IO + base + 0), divisor & 0xff); + out_8 ((u8 *) (CFG_ISA_IO + base + 1), divisor >> 8); + out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x03); + out_8 ((u8 *) (CFG_ISA_IO + base + 4), 0x03); + out_8 ((u8 *) (CFG_ISA_IO + base + 2), 0x07); + printf ("done\n"); } -void pci_mvblue_fixup_irq_behind_bridge( struct pci_controller *hose, pci_dev_t bridge, unsigned char irq) +void pci_mvblue_fixup_irq_behind_bridge (struct pci_controller *hose, + pci_dev_t bridge, unsigned char irq) { pci_dev_t d; - unsigned char bus; - unsigned short vendor, - class; - - pci_hose_read_config_byte( hose, bridge, PCI_SECONDARY_BUS, &bus ); - for (d = PCI_BDF(bus,0,0); - d < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); - d += PCI_BDF(0,0,1)) - { - pci_hose_read_config_word(hose, d, PCI_VENDOR_ID, &vendor); - if (vendor != 0xffff && vendor != 0x0000) - { - pci_hose_read_config_word( hose, d, PCI_CLASS_DEVICE, &class ); - if ( class == PCI_CLASS_BRIDGE_PCI ) - pci_mvblue_fixup_irq_behind_bridge( hose, d, irq ); + unsigned char bus; + unsigned short vendor, class; + + pci_hose_read_config_byte (hose, bridge, PCI_SECONDARY_BUS, &bus); + for (d = PCI_BDF (bus, 0, 0); + d < PCI_BDF (bus, PCI_MAX_PCI_DEVICES - 1, + PCI_MAX_PCI_FUNCTIONS - 1); + d += PCI_BDF (0, 0, 1)) { + pci_hose_read_config_word (hose, d, PCI_VENDOR_ID, &vendor); + if (vendor != 0xffff && vendor != 0x0000) { + pci_hose_read_config_word (hose, d, PCI_CLASS_DEVICE, + &class); + if (class == PCI_CLASS_BRIDGE_PCI) + pci_mvblue_fixup_irq_behind_bridge (hose, d, + irq); else - pci_hose_write_config_byte( hose, d, PCI_INTERRUPT_LINE, irq ); + pci_hose_write_config_byte (hose, d, + PCI_INTERRUPT_LINE, + irq); } } } @@ -196,58 +213,64 @@ void pci_mvblue_fixup_irq_behind_bridge( struct pci_controller *hose, pci_dev_t #define MV_MAX_PCI_BUSSES 3 #define SLOT0_IRQ 3 #define SLOT1_IRQ 4 -void pci_mvblue_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void pci_mvblue_fixup_irq (struct pci_controller *hose, pci_dev_t dev) { - unsigned char line=0xff; - unsigned short class; + unsigned char line = 0xff; + unsigned short class; - if( PCI_BUS(dev) == 0 ) { - switch(PCI_DEV(dev)) { - case 0xd: - if ( get_BoardType() == 0 ) { + if (PCI_BUS (dev) == 0) { + switch (PCI_DEV (dev)) { + case 0xd: + if (get_BoardType () == 0) { line = 1; } else /* mvBL */ - line = 2; - break; - case 0xe: + line = 2; + break; + case 0xe: /* mvBB: IDE */ line = 2; - pci_hose_write_config_byte(hose, dev, 0x8a, 0x20 ); + pci_hose_write_config_byte (hose, dev, 0x8a, 0x20); break; case 0xf: /* mvBB: Slot0 (Grabber) */ - pci_hose_read_config_word( hose, dev, PCI_CLASS_DEVICE, &class ); - if ( class == PCI_CLASS_BRIDGE_PCI ) { - pci_mvblue_fixup_irq_behind_bridge( hose, dev, SLOT0_IRQ ); + pci_hose_read_config_word (hose, dev, + PCI_CLASS_DEVICE, &class); + if (class == PCI_CLASS_BRIDGE_PCI) { + pci_mvblue_fixup_irq_behind_bridge (hose, dev, + SLOT0_IRQ); line = 0xff; } else line = SLOT0_IRQ; break; case 0x10: /* mvBB: Slot1 */ - pci_hose_read_config_word( hose, dev, PCI_CLASS_DEVICE, &class ); - if ( class == PCI_CLASS_BRIDGE_PCI ) { - pci_mvblue_fixup_irq_behind_bridge( hose, dev, SLOT1_IRQ ); + pci_hose_read_config_word (hose, dev, + PCI_CLASS_DEVICE, &class); + if (class == PCI_CLASS_BRIDGE_PCI) { + pci_mvblue_fixup_irq_behind_bridge (hose, dev, + SLOT1_IRQ); line = 0xff; } else line = SLOT1_IRQ; break; - default: - printf("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV(dev) ); + default: + printf ("***pci_scan: illegal dev = 0x%08x\n", + PCI_DEV (dev)); line = 0xff; break; - } - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line ); + } + pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, + line); } } struct pci_controller hose = { - fixup_irq: pci_mvblue_fixup_irq + fixup_irq:pci_mvblue_fixup_irq }; -void pci_init_board(void) +void pci_init_board (void) { - pci_mpc824x_init(&hose); + pci_mpc824x_init (&hose); } #endif diff --git a/board/snmc/qs850/flash.c b/board/snmc/qs850/flash.c index d4e2cbb2c8..d2f169b88e 100644 --- a/board/snmc/qs850/flash.c +++ b/board/snmc/qs850/flash.c @@ -151,7 +151,6 @@ unsigned long flash_init (void) } - /*----------------------------------------------------------------------- This code is specific to the AM29DL163/AM29DL232 for the QS850/QS823. */ diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c index ab7c8a19af..c84d08d628 100644 --- a/board/snmc/qs860t/flash.c +++ b/board/snmc/qs860t/flash.c @@ -170,7 +170,6 @@ unsigned long flash_init (void) } - /*----------------------------------------------------------------------- */ diff --git a/board/tqm8260/tqm8260.c b/board/tqm8260/tqm8260.c index a0a38caf2c..f716cf25ad 100644 --- a/board/tqm8260/tqm8260.c +++ b/board/tqm8260/tqm8260.c @@ -299,8 +299,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *addr = 0; if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ + /* Restore the original data before leaving the function. */ *addr = save[i]; for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { addr = (volatile ulong *) base + cnt; @@ -315,8 +314,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *addr = save[--i]; if (val != ~cnt) { size = cnt * sizeof (long); - /* Restore the original data before leaving the function. - */ + /* Restore the original data before leaving the function. */ for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { addr = (volatile ulong *) base + cnt; *addr = save[--i]; diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c index a974e2338a..b8a3595cf2 100644 --- a/board/tqm8xx/flash.c +++ b/board/tqm8xx/flash.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -21,7 +21,9 @@ * MA 02111-1307 USA */ -/* #define DEBUG */ +#if 0 +#define DEBUG +#endif #include <common.h> #include <mpc8xx.h> @@ -214,6 +216,8 @@ void flash_print_info (flash_info_t *info) break; case FLASH_AMLV640U: printf ("AM29LV640ML (64Mbit, uniform sector size)\n"); break; + case FLASH_AMLV320B: printf ("AM29LV320MB (32Mbit, bottom boot sect)\n"); + break; # else /* ! TQM8xxM */ case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); break; @@ -232,6 +236,8 @@ void flash_print_info (flash_info_t *info) break; case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); break; + case FLASH_AMDL163B: printf ("AM29DL163B (16 Mbit, bottom boot sect)\n"); + break; default: printf ("Unknown Chip Type\n"); break; } @@ -280,12 +286,15 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) switch (value) { case AMD_MANUFACT: + debug ("Manufacturer: AMD\n"); info->flash_id = FLASH_MAN_AMD; break; case FUJ_MANUFACT: + debug ("Manufacturer: FUJITSU\n"); info->flash_id = FLASH_MAN_FUJ; break; default: + debug ("Manufacturer: *** unknown ***\n"); info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; @@ -299,36 +308,53 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) switch (value) { #ifdef CONFIG_TQM8xxM /* mirror bit flash */ case AMD_ID_MIRROR: + debug ("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n", + addr[14], addr[15]); /* Special case for AMLV320MH/L */ if ((addr[14] & 0x00ff00ff) == 0x001d001d && - (addr[15] & 0x00ff00ff) == 0x00000000) { + (addr[15] & 0x00ff00ff) == 0x00000000) { + debug ("Chip: AMLV320MH/L\n"); info->flash_id += FLASH_AMLV320U; info->sector_count = 64; - info->size = 0x00800000; /* => 8 MB */ + info->size = 0x00800000; /* => 8 MB */ break; } switch(addr[14]) { case AMD_ID_LV128U_2: if (addr[15] != AMD_ID_LV128U_3) { + debug ("Chip: AMLV128U -> unknown\n"); info->flash_id = FLASH_UNKNOWN; - } - else { + } else { + debug ("Chip: AMLV128U\n"); info->flash_id += FLASH_AMLV128U; info->sector_count = 256; info->size = 0x02000000; } - break; /* => 32 MB */ + break; /* => 32 MB */ case AMD_ID_LV640U_2: if (addr[15] != AMD_ID_LV640U_3) { + debug ("Chip: AMLV640U -> unknown\n"); info->flash_id = FLASH_UNKNOWN; - } - else { + } else { + debug ("Chip: AMLV640U\n"); info->flash_id += FLASH_AMLV640U; info->sector_count = 128; info->size = 0x01000000; } - break; /* => 16 MB */ + break; /* => 16 MB */ + case AMD_ID_LV320B_2: + if (addr[15] != AMD_ID_LV320B_3) { + debug ("Chip: AMLV320B -> unknown\n"); + info->flash_id = FLASH_UNKNOWN; + } else { + debug ("Chip: AMLV320B\n"); + info->flash_id += FLASH_AMLV320B; + info->sector_count = 71; + info->size = 0x00800000; + } + break; /* => 8 MB */ default: + debug ("Chip: *** unknown ***\n"); info->flash_id = FLASH_UNKNOWN; break; } @@ -338,50 +364,56 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) info->flash_id += FLASH_AM400T; info->sector_count = 11; info->size = 0x00100000; - break; /* => 1 MB */ + break; /* => 1 MB */ case AMD_ID_LV400B: info->flash_id += FLASH_AM400B; info->sector_count = 11; info->size = 0x00100000; - break; /* => 1 MB */ + break; /* => 1 MB */ case AMD_ID_LV800T: info->flash_id += FLASH_AM800T; info->sector_count = 19; info->size = 0x00200000; - break; /* => 2 MB */ + break; /* => 2 MB */ case AMD_ID_LV800B: info->flash_id += FLASH_AM800B; info->sector_count = 19; info->size = 0x00200000; - break; /* => 2 MB */ + break; /* => 2 MB */ case AMD_ID_LV320T: info->flash_id += FLASH_AM320T; info->sector_count = 71; info->size = 0x00800000; - break; /* => 8 MB */ + break; /* => 8 MB */ case AMD_ID_LV320B: info->flash_id += FLASH_AM320B; info->sector_count = 71; info->size = 0x00800000; - break; /* => 8 MB */ + break; /* => 8 MB */ #endif /* TQM8xxM */ case AMD_ID_LV160T: info->flash_id += FLASH_AM160T; info->sector_count = 35; info->size = 0x00400000; - break; /* => 4 MB */ + break; /* => 4 MB */ case AMD_ID_LV160B: info->flash_id += FLASH_AM160B; info->sector_count = 35; info->size = 0x00400000; - break; /* => 4 MB */ + break; /* => 4 MB */ + + case AMD_ID_DL163B: + info->flash_id += FLASH_AMDL163B; + info->sector_count = 39; + info->size = 0x00400000; + break; /* => 4 MB */ default: info->flash_id = FLASH_UNKNOWN; @@ -402,6 +434,18 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) base += 0x20000; } break; + case FLASH_AMLV320B: + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base; + /* + * The first 8 sectors are 8 kB, + * all the other ones are 64 kB + */ + base += (i < 8) + ? 2 * ( 8 << 10) + : 2 * (64 << 10); + } + break; } break; # else /* ! TQM8xxM */ @@ -472,11 +516,24 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) info->start[i] = base + i * 0x00020000; } break; + case AMD_ID_DL163B: + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base; + /* + * The first 8 sectors are 8 kB, + * all the other ones are 64 kB + */ + base += (i < 8) + ? 2 * ( 8 << 10) + : 2 * (64 << 10); + } + break; default: return (0); break; } +#if 0 /* check for protected sectors */ for (i = 0; i < info->sector_count; i++) { /* read sector protection at sector address, (A7 .. A0) = 0x02 */ @@ -484,6 +541,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) addr = (volatile unsigned long *)(info->start[i]); info->protect[i] = addr[2] & 1; } +#endif /* * Prevent writes to uninitialized FLASH. diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c index 5f74650d54..c6b53ab6dc 100644 --- a/board/tqm8xx/tqm8xx.c +++ b/board/tqm8xx/tqm8xx.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000, 2001, 2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -21,6 +21,10 @@ * MA 02111-1307 USA */ +#if 0 +#define DEBUG +#endif + #include <common.h> #include <mpc8xx.h> @@ -92,7 +96,7 @@ const uint sdram_table[] = * If present, check for "L" type (no second DRAM bank), * otherwise "L" type is assumed as default. * - * Set board_type to 'L' for "L" type, 0 else. + * Set board_type to 'L' for "L" type, 'M' for "M" type, 0 else. */ int checkboard (void) @@ -112,6 +116,10 @@ int checkboard (void) gd->board_type = 'L'; } + if ((*(s + 6) == 'M')) { /* a TQM8xxM type */ + gd->board_type = 'M'; + } + for (; *s; ++s) { if (*s == ' ') break; @@ -167,7 +175,8 @@ long int initdram (int board_type) memctl->memc_br2 = CFG_BR2_PRELIM; #ifndef CONFIG_CAN_DRIVER - if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */ + if ((board_type != 'L') && + (board_type != 'M') ) { /* "L" and "M" type boards have only one bank SDRAM */ memctl->memc_or3 = CFG_OR3_PRELIM; memctl->memc_br3 = CFG_BR3_PRELIM; } @@ -185,7 +194,8 @@ long int initdram (int board_type) udelay (1); #ifndef CONFIG_CAN_DRIVER - if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */ + if ((board_type != 'L') && + (board_type != 'M') ) { /* "L" and "M" type boards have only one bank SDRAM */ memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */ udelay (1); memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */ @@ -204,6 +214,7 @@ long int initdram (int board_type) */ size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); + debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20); udelay (1000); @@ -212,33 +223,33 @@ long int initdram (int board_type) */ size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); + debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20); if (size8 < size9) { /* leave configuration at 9 columns */ size_b0 = size9; -/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ } else { /* back to 8 columns */ size_b0 = size8; memctl->memc_mamr = CFG_MAMR_8COL; udelay (500); -/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } + debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20); #ifndef CONFIG_CAN_DRIVER - if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */ + if ((board_type != 'L') && + (board_type != 'M') ) { /* "L" and "M" type boards have only one bank SDRAM */ /* * Check Bank 1 Memory Size * use current column settings * [9 column SDRAM may also be used in 8 column mode, * but then only half the real size will be used.] */ - size_b1 = - dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM, - SDRAM_MAX_SIZE); -/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ + size_b1 = dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); + debug ("SDRAM Bank 1: %ld MB\n", size_b1 >> 20); } else { size_b1 = 0; } -#endif /* CONFIG_CAN_DRIVER */ +#endif /* CONFIG_CAN_DRIVER */ udelay (1000); @@ -383,8 +394,7 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) +static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c index 36fdf18e89..393e094d8a 100644 --- a/board/trab/auto_update.c +++ b/board/trab/auto_update.c @@ -279,8 +279,8 @@ au_check_header_valid(int idx, long nbytes) printf ("Image %s wrong type\n", aufile[idx]); return -1; } - if ((idx == IDX_APP) && (hdr->ih_type != IH_TYPE_RAMDISK) - && (hdr->ih_type != IH_TYPE_FILESYSTEM)) { + if ((idx == IDX_APP) && (hdr->ih_type != IH_TYPE_RAMDISK) + && (hdr->ih_type != IH_TYPE_FILESYSTEM)) { printf ("Image %s wrong type\n", aufile[idx]); return -1; } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 5e31400c9e..34a74ce2c5 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -263,7 +263,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) case IH_TYPE_KERNEL: name = "Kernel Image"; break; - case IH_TYPE_MULTI: + case IH_TYPE_MULTI: name = "Multi-File Image"; len = ntohl(len_ptr[0]); /* OS kernel is always the first image */ diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 253f9efbcc..e5b1ca178e 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -333,15 +333,15 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) status = dataflash_real_protect(p,addr_first,addr_last); if (status < 0){ printf("Bad DataFlash sector specification\n"); - return 1; - } - printf("%sProtect %d DataFlash Sectors\n", - p ? "" : "Un-", status); + return 1; + } + printf("%sProtect %d DataFlash Sectors\n", + p ? "" : "Un-", status); return 0; } } #endif - + if (strcmp(argv[2], "all") == 0) { for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) { info = &flash_info[bank-1]; diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 41ed459949..e674ef4fed 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -45,8 +45,8 @@ #if defined (CONFIG_FPGA) && ( CONFIG_COMMANDS & CFG_CMD_FPGA ) /* Local functions */ -static void fpga_usage ( cmd_tbl_t *cmdtp ); -static int fpga_get_op( char *opstr ); +static void fpga_usage (cmd_tbl_t * cmdtp); +static int fpga_get_op (char *opstr); /* Local defines */ #define FPGA_NONE -1 @@ -62,106 +62,106 @@ static int fpga_get_op( char *opstr ); * If there is no data addr field, the fpgadata environment variable is used. * The info command requires no data address field. */ -int -do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - int op, dev = FPGA_INVALID_DEVICE; - size_t data_size = 0; - void *fpga_data = NULL; - char *devstr = getenv("fpga"); - char *datastr = getenv("fpgadata"); - int rc = FPGA_FAIL; - - if ( devstr ) dev = (int)simple_strtoul( devstr, NULL, 16 ); - if ( datastr ) fpga_data = (void *)simple_strtoul( datastr, NULL, 16 ); - - switch ( argc ) - { - case 5: /* fpga <op> <dev> <data> <datasize> */ - data_size = simple_strtoul( argv[4], NULL, 16 ); - case 4: /* fpga <op> <dev> <data> */ - fpga_data = (void *)simple_strtoul( argv[3], NULL, 16 ); - PRINTF(__FUNCTION__": fpga_data = 0x%x\n", (uint)fpga_data ); - case 3: /* fpga <op> <dev | data addr> */ - dev = (int)simple_strtoul( argv[2], NULL, 16 ); - PRINTF(__FUNCTION__": device = %d\n", dev ); - /* FIXME - this is a really weak test */ - if (( argc == 3 ) && ( dev > fpga_count() )) { /* must be buffer ptr */ - PRINTF(__FUNCTION__": Assuming buffer pointer in arg 3\n"); - fpga_data = (void *)dev; - PRINTF(__FUNCTION__": fpga_data = 0x%x\n", (uint)fpga_data ); - dev = FPGA_INVALID_DEVICE; /* reset device num */ - } - case 2: /* fpga <op> */ - op = (int)fpga_get_op( argv[1] ); - break; - default: - PRINTF(__FUNCTION__": Too many or too few args (%d)\n", argc ); - op = FPGA_NONE; /* force usage display */ - break; - } - - switch ( op ) { - case FPGA_NONE: - fpga_usage( cmdtp ); - break; - - case FPGA_INFO: - rc = fpga_info( dev ); - break; - - case FPGA_LOAD: - rc = fpga_load( dev, fpga_data, data_size ); - break; - - case FPGA_DUMP: - rc = fpga_dump( dev, fpga_data, data_size ); - break; - - default: - printf( "Unknown operation.\n" ); - fpga_usage( cmdtp ); - break; - } - return (rc); + int op, dev = FPGA_INVALID_DEVICE; + size_t data_size = 0; + void *fpga_data = NULL; + char *devstr = getenv ("fpga"); + char *datastr = getenv ("fpgadata"); + int rc = FPGA_FAIL; + + if (devstr) + dev = (int) simple_strtoul (devstr, NULL, 16); + if (datastr) + fpga_data = (void *) simple_strtoul (datastr, NULL, 16); + + switch (argc) { + case 5: /* fpga <op> <dev> <data> <datasize> */ + data_size = simple_strtoul (argv[4], NULL, 16); + case 4: /* fpga <op> <dev> <data> */ + fpga_data = (void *) simple_strtoul (argv[3], NULL, 16); + PRINTF (__FUNCTION__ ": fpga_data = 0x%x\n", + (uint) fpga_data); + case 3: /* fpga <op> <dev | data addr> */ + dev = (int) simple_strtoul (argv[2], NULL, 16); + PRINTF (__FUNCTION__ ": device = %d\n", dev); + /* FIXME - this is a really weak test */ + if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */ + PRINTF (__FUNCTION__ + ": Assuming buffer pointer in arg 3\n"); + fpga_data = (void *) dev; + PRINTF (__FUNCTION__ ": fpga_data = 0x%x\n", + (uint) fpga_data); + dev = FPGA_INVALID_DEVICE; /* reset device num */ + } + case 2: /* fpga <op> */ + op = (int) fpga_get_op (argv[1]); + break; + default: + PRINTF (__FUNCTION__ ": Too many or too few args (%d)\n", + argc); + op = FPGA_NONE; /* force usage display */ + break; + } + + switch (op) { + case FPGA_NONE: + fpga_usage (cmdtp); + break; + + case FPGA_INFO: + rc = fpga_info (dev); + break; + + case FPGA_LOAD: + rc = fpga_load (dev, fpga_data, data_size); + break; + + case FPGA_DUMP: + rc = fpga_dump (dev, fpga_data, data_size); + break; + + default: + printf ("Unknown operation.\n"); + fpga_usage (cmdtp); + break; + } + return (rc); } -static void fpga_usage ( cmd_tbl_t *cmdtp ) +static void fpga_usage (cmd_tbl_t * cmdtp) { - printf( "Usage:\n%s\n", cmdtp->usage ); + printf ("Usage:\n%s\n", cmdtp->usage); } /* * Map op to supported operations. We don't use a table since we * would just have to relocate it from flash anyway. */ -static int fpga_get_op( char *opstr ) +static int fpga_get_op (char *opstr) { int op = FPGA_NONE; if (!strcmp ("info", opstr)) { op = FPGA_INFO; - } - else if (!strcmp ("load", opstr)) { + } else if (!strcmp ("load", opstr)) { op = FPGA_LOAD; - } - else if (!strcmp ("dump", opstr)) { + } else if (!strcmp ("dump", opstr)) { op = FPGA_DUMP; } - if ( op == FPGA_NONE ) { + if (op == FPGA_NONE) { printf ("Unknown fpga operation \"%s\"\n", opstr); } return op; } -U_BOOT_CMD( - fpga, 6, 1, do_fpga, - "fpga - loadable FPGA image support\n", - "fpga [operation type] [device number] [image address] [image size]\n" - "fpga operations:\n" - "\tinfo\tlist known device information.\n" - "\tload\tLoad device from memory buffer.\n" - "\tdump\tLoad device to memory buffer.\n" -); -#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */ +U_BOOT_CMD (fpga, 6, 1, do_fpga, + "fpga - loadable FPGA image support\n", + "fpga [operation type] [device number] [image address] [image size]\n" + "fpga operations:\n" + "\tinfo\tlist known device information.\n" + "\tload\tLoad device from memory buffer.\n" + "\tdump\tLoad device to memory buffer.\n"); +#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 3f18b00d10..331041c16c 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -771,7 +771,7 @@ ide_outb(int dev, int port, unsigned char val) { PRINTF ("ide_outb (dev= %d, port= %d, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, (ATA_CURR_BASE(dev)+port)); - + /* Ensure I/O operations complete */ __asm__ volatile("eieio"); *((uchar *)(ATA_CURR_BASE(dev)+port)) = val; diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 35b3901d23..6ccad70fe1 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -146,9 +146,9 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if ((rc = read_dataflash(addr, (linebytes/size)*size, linebuf)) == DATAFLASH_OK){ /* if outside dataflash */ /*if (rc != 1) { - dataflash_perror (rc); - return (1); - }*/ + dataflash_perror (rc); + return (1); + }*/ for (i=0; i<linebytes; i+= size) { if (size == 4) { printf(" %08x", *uip++); @@ -439,9 +439,9 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int rc; rc = read_dataflash(addr, count * size, (char *) dest); if (rc != 1) { - dataflash_perror (rc); - return (1); - } + dataflash_perror (rc); + return (1); + } return 0; } diff --git a/cpu/coldfire/Makefile b/cpu/coldfire/Makefile index 085d840c0f..3976f5689d 100644 --- a/cpu/coldfire/Makefile +++ b/cpu/coldfire/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a -START = +START = OBJS = kgdb.o serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o all: .depend $(START) $(LIB) diff --git a/cpu/coldfire/fec.c b/cpu/coldfire/fec.c index 53a93c1ceb..50627415ec 100644 --- a/cpu/coldfire/fec.c +++ b/cpu/coldfire/fec.c @@ -27,7 +27,6 @@ #include <command.h> - /************************************************************** * * FEC Ethernet Initialization Routine @@ -50,18 +49,14 @@ #define FEC_RESET_DELAY 50000 - /* Ethernet Transmit and Receive Buffers */ #define DBUF_LENGTH 1520 - #define TX_BUF_CNT 2 - #define TOUT_LOOP 100 -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 #ifdef CONFIG_M5272 @@ -76,11 +71,10 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET) - static char txbuf[DBUF_LENGTH]; -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ +static uint rxIdx; /* index of the current RX buffer */ +static uint txIdx; /* index of the current TX buffer */ /* * FEC Ethernet Tx and Rx buffer descriptors allocated at the @@ -89,14 +83,14 @@ static uint txIdx; /* index of the current TX buffer */ */ typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ + cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ + cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ } RTXBD; static RTXBD *rtx = 0x380000; -int eth_send(volatile void *packet, int length) +int eth_send (volatile void *packet, int length) { int j, rc; volatile fec_t *fecp = FEC_ADDR; @@ -105,35 +99,37 @@ int eth_send(volatile void *packet, int length) * Wait for ready */ j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { - udelay(1); + while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) + && (j < TOUT_LOOP)) { + udelay (1); j++; } - if (j>=TOUT_LOOP) { - printf("TX not ready\n"); + if (j >= TOUT_LOOP) { + printf ("TX not ready\n"); } - rtx->txbd[txIdx].cbd_bufaddr = (uint)packet; - rtx->txbd[txIdx].cbd_datlen = length; + rtx->txbd[txIdx].cbd_bufaddr = (uint) packet; + rtx->txbd[txIdx].cbd_datlen = length; rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; /* Activate transmit Buffer Descriptor polling */ - fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ + fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) { - udelay(1); + while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) + && (j < TOUT_LOOP)) { + udelay (1); j++; } - if (j>=TOUT_LOOP) { - printf("TX timeout\n"); + if (j >= TOUT_LOOP) { + printf ("TX timeout\n"); } #ifdef ET_DEBUG - printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc, - (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2); + printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", + __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc, + (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2); #endif - /* return only status bits */; + /* return only status bits */ ; rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); txIdx = (txIdx + 1) % TX_BUF_CNT; @@ -141,48 +137,49 @@ int eth_send(volatile void *packet, int length) return rc; } -int eth_rx(void) +int eth_rx (void) { int length; volatile fec_t *fecp = FEC_ADDR; - for (;;) - { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } + for (;;) { + /* section 16.9.23.2 */ + if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } - length = rtx->rxbd[rxIdx].cbd_datlen; + length = rtx->rxbd[rxIdx].cbd_datlen; - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { + if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { #ifdef ET_DEBUG - printf("%s[%d] err: %x\n", - __FUNCTION__,__LINE__,rtx->rxbd[rxIdx].cbd_sc); + printf ("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + rtx->rxbd[rxIdx].cbd_sc); #endif - } else { - /* Pass the packet up to the protocol layers. */ - NetReceive(NetRxPackets[rxIdx], length - 4); + } else { + /* Pass the packet up to the protocol layers. */ + NetReceive (NetRxPackets[rxIdx], length - 4); + } + + /* Give the buffer back to the FEC. */ + rtx->rxbd[rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if ((rxIdx + 1) >= PKTBUFSRX) { + rtx->rxbd[PKTBUFSRX - 1].cbd_sc = + (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); + rxIdx = 0; + } else { + rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + rxIdx++; + } + + /* Try to fill Buffer Descriptors */ + fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ } - /* Give the buffer back to the FEC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - - /* Try to fill Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - } - - return length; + return length; } @@ -191,7 +188,7 @@ int eth_init (bd_t * bd) int i; volatile fec_t *fecp = FEC_ADDR; - + /* Whack a reset. * A delay is required between a reset of the FEC block and * initialization of other FEC registers because the reset takes @@ -214,21 +211,21 @@ int eth_init (bd_t * bd) /* We use strictly polling mode only */ fecp->fec_imask = 0; - + /* Clear any pending interrupt */ fecp->fec_ievent = 0xffffffff; - - /* Set station address */ + + /* Set station address */ #define ea bd->bi_enetaddr - fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | - (ea[2] << 8) | (ea[3] ) ; - fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16 ) ; + fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | + (ea[2] << 8) | (ea[3]); + fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16); #undef ea /* Clear multicast address hash table */ fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; + fecp->fec_hash_table_low = 0; /* Set maximum receive buffer size. */ @@ -246,8 +243,8 @@ int eth_init (bd_t * bd) * Empty, Wrap */ for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ + rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + rtx->rxbd[i].cbd_datlen = 0; /* Reset */ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; } rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; @@ -258,8 +255,8 @@ int eth_init (bd_t * bd) * Last, Tx CRC */ for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; - rtx->txbd[i].cbd_datlen = 0; /* Reset */ + rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; + rtx->txbd[i].cbd_datlen = 0; /* Reset */ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); } rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; @@ -273,8 +270,8 @@ int eth_init (bd_t * bd) */ /* Half duplex mode */ - fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE<<16) | FEC_RCNTRL_MII_MODE; - fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE<<16) | FEC_RCNTRL_MII_MODE; + fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16) | FEC_RCNTRL_MII_MODE; + fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16) | FEC_RCNTRL_MII_MODE; fecp->fec_x_cntrl = 0; fecp->fec_mii_speed = 0; @@ -284,17 +281,16 @@ int eth_init (bd_t * bd) fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; /* And last, try to fill Rx Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ + fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ return 1; } - -void eth_halt(void) +void eth_halt (void) { volatile fec_t *fecp = FEC_ADDR; + fecp->fec_ecntrl = 0; } - #endif diff --git a/cpu/coldfire/start.S b/cpu/coldfire/start.S index 7e02661e0a..44542231db 100644 --- a/cpu/coldfire/start.S +++ b/cpu/coldfire/start.S @@ -14,7 +14,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -26,8 +26,8 @@ #include <config.h> #include "version.h" -#ifndef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING "" +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" #endif #define MCF_MBAR 0x10000000 @@ -38,30 +38,30 @@ .text - .globl _start + .globl _start _start: nop nop move.w #0x2700,%sr - move.l #0, %d0 - movec %d0, %VBR + move.l #0, %d0 + movec %d0, %VBR #ifdef CONFIG_M5272 - move.l #(MCF_MBAR+1), %d0 - move.c %d0, %MBAR - - move.l #(MEM_BUILTIN_ADDR+1), %d0 - movec %d0, %RAMBAR0 - - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ + move.l #(MCF_MBAR+1), %d0 + move.c %d0, %MBAR + + move.l #(MEM_BUILTIN_ADDR+1), %d0 + movec %d0, %RAMBAR0 + + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0x0000c000, %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #0xff00c000, %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + move.l #0x80000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ #endif move.l #_sbss,%a0 @@ -71,8 +71,8 @@ _start: cmp.l %a0,%d0 bne.s 1b -/* move.l #MEM_BUILTIN_ADDR+MEM_BUILTIN_SIZE, %sp */ - move.l #DRAM_ADDR+DRAM_SIZE, %sp +/* move.l #MEM_BUILTIN_ADDR+MEM_BUILTIN_SIZE, %sp */ + move.l #DRAM_ADDR+DRAM_SIZE, %sp clr.l %sp@- jsr board_init_f @@ -107,44 +107,44 @@ addresserror_handler: lea %sp@(60),%sp rte - .globl get_endaddr + .globl get_endaddr get_endaddr: movel #_end,%d0 rts #ifdef CONFIG_M5272 - .globl icache_enable + .globl icache_enable icache_enable: - move.l #0x01000000, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0x0000c000, %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - move.l #0xff00c000, %d0 /* Setup cache mask */ - movec %d0, %ACR1 /* Enable cache */ - move.l #0x80000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ + move.l #0x01000000, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0x0000c000, %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + move.l #0xff00c000, %d0 /* Setup cache mask */ + movec %d0, %ACR1 /* Enable cache */ + move.l #0x80000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ moveq #1, %d0 move.l %d0, icache_state rts - .globl icache_disable + .globl icache_disable icache_disable: - move.l #0x00000100, %d0 /* Setup cache mask */ - movec %d0, %CACR /* Enable cache */ - clr.l %d0 /* Setup cache mask */ - movec %d0, %ACR0 /* Enable cache */ - movec %d0, %ACR1 /* Enable cache */ + move.l #0x00000100, %d0 /* Setup cache mask */ + movec %d0, %CACR /* Enable cache */ + clr.l %d0 /* Setup cache mask */ + movec %d0, %ACR0 /* Enable cache */ + movec %d0, %ACR1 /* Enable cache */ moveq #0, %d0 move.l %d0, icache_state rts #endif #ifdef CONFIG_M5282 - .globl icache_enable + .globl icache_enable icache_enable: rts - .globl icache_disable + .globl icache_disable icache_disable: rts #endif @@ -158,7 +158,7 @@ icache_status: icache_state: .long 1 - .globl version_string + .globl version_string version_string: .ascii U_BOOT_VERSION .ascii " (", __DATE__, " - ", __TIME__, ")" diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 74b786dfb1..e48fa88b5d 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -36,6 +36,33 @@ typedef struct { } NBUF; /********************************************************************/ +#if (DEBUG & 0x2) +static void mpc5xxx_fec_phydump (void) +{ + uint16 phyStatus, i; + uint8 phyAddr = CONFIG_PHY_ADDR; + uint8 reg_mask[] = { +#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ + /* regs to print: 0...7, 16...19, 21, 23, 24 */ + 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, +#else + /* regs to print: 0...8, 16...20 */ + 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +#endif + }; + + for (i = 0; i < 32; i++) { + if (reg_mask[i]) { + miiphy_read(phyAddr, i, &phyStatus); + printf("Mii reg %d: 0x%04x\n", i, phyStatus); + } + } +} +#endif + +/********************************************************************/ static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec) { int ix; @@ -211,7 +238,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) DECLARE_GLOBAL_DATA_PTR; mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - const uint8 phyAddr = 0; /* Only one PHY */ + const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ #if (DEBUG & 0x1) printf ("mpc5xxx_fec_init... Begin\n"); @@ -472,21 +499,11 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) */ fec->eth->ecntrl |= 0x00000006; - if (fec->xcv_type != SEVENWIRE) { #if (DEBUG & 0x2) - uint16 phyStatus, i; - uint8 phyAddr = 0; - - for (i = 0; i < 9; i++) { - miiphy_read(phyAddr, i, &phyStatus); - printf("Mii reg %d: 0x%04x\n", i, phyStatus); - } - for (i = 16; i < 21; i++) { - miiphy_read(phyAddr, i, &phyStatus); - printf("Mii reg %d: 0x%04x\n", i, phyStatus); - } + if (fec->xcv_type != SEVENWIRE) + mpc5xxx_fec_phydump (); #endif - } + /* * Enable SmartDMA receive task */ @@ -509,22 +526,10 @@ static void mpc5xxx_fec_halt(struct eth_device *dev) int counter = 0xffff; #if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) { - uint16 phyStatus, i; - uint8 phyAddr = 0; - - for (i = 0; i < 9; i++) { - miiphy_read(phyAddr, i, &phyStatus); - printf("Mii reg %d: 0x%04x\n", i, phyStatus); - } - for (i = 16; i < 21; i++) { - miiphy_read(phyAddr, i, &phyStatus); - printf ("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } + if (fec->xcv_type != SEVENWIRE) + mpc5xxx_fec_phydump (); #endif - /* * mask FEC chip interrupts */ @@ -587,7 +592,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev) static void tfifo_print(mpc5xxx_fec_priv *fec) { - uint16 phyAddr = 0; + uint16 phyAddr = CONFIG_PHY_ADDR; uint16 phyStatus; if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) @@ -611,7 +616,7 @@ static void tfifo_print(mpc5xxx_fec_priv *fec) static void rfifo_print(mpc5xxx_fec_priv *fec) { - uint16 phyAddr = 0; + uint16 phyAddr = CONFIG_PHY_ADDR; uint16 phyStatus; if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) @@ -825,12 +830,12 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->eth = (ethernet_regs *)MPC5XXX_FEC; fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#ifdef CONFIG_ICECUBE -#ifndef CONFIG_FEC_10MBIT +#if defined(CONFIG_ICECUBE) || defined(CONFIG_TOP5200) +# ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; -#else +# else fec->xcv_type = MII10; -#endif +# endif #else #error fec->xcv_type not initialized. #endif diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S index e0873edbc6..a001e1ce40 100644 --- a/cpu/mpc5xxx/start.S +++ b/cpu/mpc5xxx/start.S @@ -118,18 +118,12 @@ boot_warm: ori r3, r3, 0x02010000@l stw r3, 0x54(r4) -#if defined(CFG_LOWBOOT08) - lis r3, 0xff800160@h - ori r3, r3, 0xff800160@l -#endif -#if defined(CFG_LOWBOOT16) - lis r3, 0xff000160@h - ori r3, r3, 0xff000160@l -#endif + lis r3, lowboot_reentry@h + ori r3, r3, lowboot_reentry@l mtlr r3 - blr -lowboot_reentry: /* FLASH_BASE + 0x160 */ - + blr /* jump to flash based address */ + +lowboot_reentry: lis r3, 0x0000FF00@h ori r3, r3, 0x0000FF00@l stw r3, 0x4c(r4) @@ -143,7 +137,7 @@ lowboot_reentry: /* FLASH_BASE + 0x160 */ ori r3, r3, 0x02000001@l stw r3, 0x54(r4) #endif /* CFG_LOWBOOT */ - + #if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT) lis r3, CFG_MBAR@h ori r3, r3, CFG_MBAR@l diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c index 12ef82b868..3815537557 100644 --- a/cpu/mpc8xx/speed.c +++ b/cpu/mpc8xx/speed.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -160,7 +160,7 @@ unsigned long measure_gclk(void) timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2); immr->im_sit.sit_piscr &= ~PISCR_PTE; -#ifdef CONFIG_MPC866_et_al +#if defined(CONFIG_MPC866_et_al) /* not using OSCM, using XIN, so scale appropriately */ return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L; #else diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 1a9ae9d7d1..974797f4d5 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -92,7 +92,7 @@ int interrupt_init_cpu (unsigned *decrementer_count) /* decrementer is automatically reloaded */ *decrementer_count = 0; - + /* * Mark all irqs as free */ diff --git a/drivers/rtl8019.h b/drivers/rtl8019.h index b53e142823..38116ad845 100644 --- a/drivers/rtl8019.h +++ b/drivers/rtl8019.h @@ -115,21 +115,3 @@ #endif /*end of CONFIG_DRIVER_RTL8019*/ - - - - - - - - - - - - - - - - - - diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h index 343a9f497d..820551856d 100644 --- a/include/asm-m68k/ptrace.h +++ b/include/asm-m68k/ptrace.h @@ -105,4 +105,3 @@ struct pt_regs { #define PT_FPSCR (PT_FPR0 + 2*32 + 1) #endif - diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h index eaf1de74e6..b4144900e8 100644 --- a/include/asm-m68k/u-boot.h +++ b/include/asm-m68k/u-boot.h @@ -39,9 +39,9 @@ typedef struct bd_info { unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ @@ -56,11 +56,11 @@ typedef struct bd_info { * * Keep it *SMALL* and remember to set CFG_INIT_DATA_SIZE > sizeof(init_data_t) */ -typedef struct init_data { +typedef struct init_data { unsigned long cpu_clk; /* VCOOUT = CPU clock in Hz! */ unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ - unsigned long relocated; /* Relocat. offset when running in RAM */ + unsigned long relocated; /* Relocat. offset when running in RAM */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_LCD unsigned long lcd_base; /* Base address of LCD frambuffer mem */ diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index 1fd00ccba9..845dd7c946 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -14,21 +14,21 @@ /* * Memory segments (32bit kernel mode addresses) */ -#define KUSEG 0x00000000 -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 -#define KSEG2 0xc0000000 -#define KSEG3 0xe0000000 +#define KUSEG 0x00000000 +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 +#define KSEG2 0xc0000000 +#define KSEG3 0xe0000000 -#define K0BASE KSEG0 +#define K0BASE KSEG0 /* * Returns the kernel segment base of a given address */ #ifndef __ASSEMBLY__ -#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) +#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) #else -#define KSEGX(a) ((a) & 0xe0000000) +#define KSEGX(a) ((a) & 0xe0000000) #endif /* @@ -40,8 +40,8 @@ #define PHYSADDR(a) ((a) & 0x1fffffff) #endif -/* - * Returns the uncached address of a sdram address +/* + * Returns the uncached address of a sdram address */ #ifndef __ASSEMBLY__ #ifdef CONFIG_AU1X00 @@ -49,7 +49,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_AU1X00 */ -#define UNCACHED_SDRAM(a) PHYSADDR(a) +#define UNCACHED_SDRAM(a) PHYSADDR(a) #endif /* CONFIG_AU1X00 */ #endif /* __ASSEMBLY__ */ /* @@ -70,13 +70,13 @@ /* * Memory segments (64bit kernel mode addresses) */ -#define XKUSEG 0x0000000000000000 -#define XKSSEG 0x4000000000000000 -#define XKPHYS 0x8000000000000000 -#define XKSEG 0xc000000000000000 -#define CKSEG0 0xffffffff80000000 -#define CKSEG1 0xffffffffa0000000 -#define CKSSEG 0xffffffffc0000000 -#define CKSEG3 0xffffffffe0000000 +#define XKUSEG 0x0000000000000000 +#define XKSSEG 0x4000000000000000 +#define XKPHYS 0x8000000000000000 +#define XKSEG 0xc000000000000000 +#define CKSEG0 0xffffffff80000000 +#define CKSEG1 0xffffffffa0000000 +#define CKSSEG 0xffffffffc0000000 +#define CKSEG3 0xffffffffe0000000 #endif /* __ASM_MIPS_ADDRSPACE_H */ diff --git a/include/common.h b/include/common.h index ece5d64cf3..73a5a2e880 100644 --- a/include/common.h +++ b/include/common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -49,11 +49,11 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_MPC860T #define CONFIG_MPC86x 1 #endif -#if defined(CONFIG_MPC866P) || \ - defined(CONFIG_MPC866T) || \ - defined(CONFIG_MPC859T) || \ - defined(CONFIG_MPC859DSL) || \ - defined(CONFIG_MPC852T) +#if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \ + defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ + defined(CONFIG_MPC859DSL) || \ + defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \ + defined(CONFIG_MPC866P) #define CONFIG_MPC866_et_al 1 #define CONFIG_MPC86x 1 #endif @@ -100,7 +100,7 @@ typedef void (interrupt_handler_t)(void *); */ #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862M) + defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) # ifndef CONFIG_TQM8xxM # define CONFIG_TQM8xxM # endif diff --git a/include/commproc.h b/include/commproc.h index 3da804fe43..8bab5225c2 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -2,6 +2,9 @@ * MPC8xx Communication Processor Module. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * * This file contains structures and information for the communication * processor channels. Some CPM control and status is available * throught the MPC8xx internal memory map. See immap.h for details. @@ -1430,11 +1433,12 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00002600) #endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */ -/*** TQM855L/M, TQM860L/M, TQM862L/M ********************************/ +/*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/ #if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \ defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) + defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) || \ + defined(CONFIG_TQM866L) || defined(CONFIG_TQM866M) # ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 2f0a875838..194f62faf2 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -215,6 +215,7 @@ */ #define CONFIG_MPC5XXX_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ +#define CONFIG_PHY_ADDR 0x00 /* * GPIO configuration diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 6965e1cdb7..32f9e91c3b 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -53,7 +53,7 @@ #define ERR_LED(code) #endif -#undef DEBUG +#undef DEBUG #define CONFIG_MPC824X 1 #define CONFIG_MPC8245 1 @@ -71,14 +71,14 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n\0" -#define CONFIG_AUTOBOOT_STOP_STR "s\0" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n" +#define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 60 #define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \ - CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \ - CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN ) + CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \ + CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN ) #define CONFIG_BOOTP_MASK ( 0xffffffff ) @@ -103,19 +103,19 @@ #define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console_nr=0\0" \ - "dhcp_client_id=mvBOX-XP\0" \ - "dhcp_vendor-class-identifier=mvBOX\0" \ - "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \ - "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \ - "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \ - "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \ - "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console_nr=0\0" \ + "dhcp_client_id=mvBOX-XP\0" \ + "dhcp_vendor-class-identifier=mvBOX\0" \ + "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \ + "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \ + "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \ + "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \ + "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \ "mv_version=" MV_VERSION "\0" \ - "bootretry=30\0" + "bootretry=30\0" #define CONFIG_OVERWRITE_ETHADDR_ONCE @@ -124,11 +124,11 @@ *----------------------------------------------------------------------- */ -#define CONFIG_PCI +#define CONFIG_PCI #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_NET_MULTI +#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 5 #define CONFIG_TULIP @@ -144,8 +144,8 @@ */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFF00000 -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_FLASH_BASE 0xFFF00000 +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_RESET_ADDRESS 0xFFF00100 #define CFG_EUMB_ADDR 0xFC000000 @@ -196,7 +196,7 @@ * For the detail description refer to the MPC8240 user's manual. */ -#define CONFIG_SYS_CLK_FREQ 33000000 +#define CONFIG_SYS_CLK_FREQ 33000000 #define CFG_HZ 10000 /* Bit-field values for MCCR1. */ @@ -205,17 +205,17 @@ /* Bit-field values for MCCR2. */ #define CFG_TSWAIT 0x5 -#define CFG_REFINT 430 +#define CFG_REFINT 430 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CFG_BSTOPRE 121 +#define CFG_BSTOPRE 121 /* Bit-field values for MCCR3. */ #define CFG_REFREC 8 /* Bit-field values for MCCR4. */ -#define CFG_PRETOACT 3 -#define CFG_ACTTOPRE 5 +#define CFG_PRETOACT 3 +#define CFG_ACTTOPRE 5 #define CFG_ACTORW 3 #define CFG_SDMODE_CAS_LAT 3 #define CFG_REGISTERD_TYPE_BUFFER 1 @@ -292,7 +292,7 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#undef CFG_FLASH_PROTECTION +#undef CFG_FLASH_PROTECTION #define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ #define CFG_MAX_FLASH_SECT 63 /* Max number of sectors per flash */ @@ -300,11 +300,11 @@ #define CFG_FLASH_WRITE_TOUT 1000 -#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_IS_IN_FLASH #define CFG_ENV_OFFSET 0x00010000 -#define CFG_ENV_SIZE 0x00010000 -#define CFG_ENV_SECT_SIZE 0x00010000 +#define CFG_ENV_SIZE 0x00010000 +#define CFG_ENV_SECT_SIZE 0x00010000 /*----------------------------------------------------------------------- * Cache Configuration diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 92eccd36aa..8d29a31a05 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -47,7 +47,6 @@ #define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */ - /* * High Level Configuration Options * (easy to change) @@ -368,7 +367,6 @@ CONFIG_SPI /* #define CFG_BR5 0xE4000000 */ - /* * BR6 and OR6 (Expansion bus) * Base address = 0xE800_0000 - 0xEBFF_FFFF @@ -381,7 +379,6 @@ CONFIG_SPI /* #define CFG_BR6 0xE8000000 */ - /* * BR7 and OR7 (Expansion bus) * Base address = 0xEC00_0000 - 0xEFFF_FFFF @@ -394,7 +391,6 @@ CONFIG_SPI /* #define CFG_BR7 0xE8000000 */ - /* * Internal Definitions * diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index 21daa2d971..624beed31a 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -1,16 +1,17 @@ /* * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * modified for TOP5200 by Reinhard Meyer, www.emk-elektronik.de
- * TOP5200 differences from IceCube:
- * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks
- * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins
- * 1 SDRAM/DDRAM Bank up to 256 MB
- * local VPD I2C Bus is software driven and uses
- * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL
- * FLASH is located at 0x80000000
- * Internal regs are at 0xfff00000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * modified for TOP5200-series by Reinhard Meyer, www.emk-elektronik.de + * + * TOP5200 differences from IceCube: + * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks + * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins + * 1 SDRAM/DDRAM Bank up to 256 MB + * local VPD I2C Bus is software driven and uses + * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL + * FLASH is re-located at 0xff000000 + * Internal regs are at 0xf0000000 * Reset jumps to 0x00000100 * * See file CREDITS for list of people who contributed to this @@ -44,7 +45,7 @@ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ #define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */ -#define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33MHz */ +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ @@ -98,17 +99,48 @@ #include <cmd_confdefs.h> /* + * low boot + */ +#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ +# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT16 1 +#endif + +/* * Autobooting */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "bootfile=/tftpboot/MPC5200/uImage\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" /* * IPB Bus clocking configuration. */ #undef CFG_IPBSPEED_133 /* define for 133MHz speed */ -
+ /* * I2C configuration */ @@ -120,21 +152,21 @@ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_EEPROM_SIZE 0x2000 -
+ #define CONFIG_ENV_OVERWRITE #define CONFIG_MISC_INIT_R -
+ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 -
+ #if defined (CONFIG_SOFT_I2C) # define SDA0 0x40 # define SCL0 0x80 -# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00))
-# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08))
-# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c))
-# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20))
-# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04))
+# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00)) +# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08)) +# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c)) +# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20)) +# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04)) # define I2C_INIT {GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);} # define I2C_READ ((DVI0&SDA0)?1:0) # define I2C_SDA(x) {if(x)DVO0|=SDA0;else DVO0&=~SDA0;} @@ -145,12 +177,12 @@ # define CFG_I2C_SPEED 100000 # define CFG_I2C_SLAVE 0x7F #endif -
-#if defined (CONFIG_HARD_I2C)
+ +#if defined (CONFIG_HARD_I2C) # define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ # define CFG_I2C_SPEED 100000 /* 100 kHz */ # define CFG_I2C_SLAVE 0x7F -#endif
+#endif /* * Flash configuration, expect one 16 Megabyte Bank at most @@ -158,7 +190,7 @@ #define CFG_FLASH_BASE 0xff000000 #define CFG_FLASH_SIZE 0x01000000 #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0) #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ @@ -167,32 +199,32 @@ #undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ -/*
- * DRAM configuration - will be read from VPD later... TODO!
- */
-#if 0
-/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */
-#define CFG_DRAM_DDR 0
-#define CFG_DRAM_EMODE 0
-#define CFG_DRAM_MODE 0x008D
-#define CFG_DRAM_CONTROL 0x514F0000
-#define CFG_DRAM_CONFIG1 0xC2233A00
-#define CFG_DRAM_CONFIG2 0x88B70004
-#define CFG_DRAM_TAP_DEL 0x08
-#define CFG_DRAM_RAM_SIZE 0x19
-#endif
-#if 1
-/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */
-#define CFG_DRAM_DDR 0
-#define CFG_DRAM_EMODE 0
-#define CFG_DRAM_MODE 0x00CD
-#define CFG_DRAM_CONTROL 0x514F0000
-#define CFG_DRAM_CONFIG1 0xD2333A00
-#define CFG_DRAM_CONFIG2 0x8AD70004
-#define CFG_DRAM_TAP_DEL 0x08
-#define CFG_DRAM_RAM_SIZE 0x19
-#endif
-
+/* + * DRAM configuration - will be read from VPD later... TODO! + */ +#if 0 +/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */ +#define CFG_DRAM_DDR 0 +#define CFG_DRAM_EMODE 0 +#define CFG_DRAM_MODE 0x008D +#define CFG_DRAM_CONTROL 0x514F0000 +#define CFG_DRAM_CONFIG1 0xC2233A00 +#define CFG_DRAM_CONFIG2 0x88B70004 +#define CFG_DRAM_TAP_DEL 0x08 +#define CFG_DRAM_RAM_SIZE 0x19 +#endif +#if 1 +/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */ +#define CFG_DRAM_DDR 0 +#define CFG_DRAM_EMODE 0 +#define CFG_DRAM_MODE 0x00CD +#define CFG_DRAM_CONTROL 0x514F0000 +#define CFG_DRAM_CONFIG1 0xD2333A00 +#define CFG_DRAM_CONFIG2 0x8AD70004 +#define CFG_DRAM_TAP_DEL 0x08 +#define CFG_DRAM_RAM_SIZE 0x19 +#endif + /* * Environment settings */ @@ -201,17 +233,17 @@ #define CFG_ENV_SIZE 0x0700 #define CFG_I2C_EEPROM_ADDR 0x57 -/*
- * VPD settings
- */
+/* + * VPD settings + */ #define CFG_FACT_OFFSET 0x1800 #define CFG_FACT_SIZE 0x0800 #define CFG_I2C_FACT_ADDR 0x57 -
+ /* - * Memory map
- *
- * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
+ * Memory map + * + * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 */ #define CFG_MBAR 0xf0000000 /* DO NOT CHANGE this */ #define CFG_SDRAM_BASE 0x00000000 @@ -240,12 +272,12 @@ */ #define CONFIG_MPC5XXX_FEC 1 #define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1f
+#define CONFIG_PHY_ADDR 0x1f #define CONFIG_PHY_TYPE 0x79c874 /* - * GPIO configuration:
- * PSC1,2,3 predefined as UART
- * PCI disabled
+ * GPIO configuration: + * PSC1,2,3 predefined as UART + * PCI disabled * Ethernet 100 with MD */ #define CFG_GPS_PORT_CONFIG 0x00058444 diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index e926d933c2..cb4a16abdc 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2003 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -83,6 +83,39 @@ #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ + +#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */ +#if 0 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 +#endif + #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) #define CONFIG_MAC_PARTITION @@ -93,6 +126,7 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ CFG_CMD_IDE | \ CFG_CMD_DATE ) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h new file mode 100644 index 0000000000..0219836f5e --- /dev/null +++ b/include/configs/TQM866M.h @@ -0,0 +1,526 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC866 1 /* This is a MPC866 CPU */ +#define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */ + +#define CFG_8XX_XIN 10000000 /* XXX XXX XXX */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/TQM855M/uImage\0" \ + "kernel_addr=40080000\0" \ + "ramdisk_addr=40180000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ + +#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C256 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_IDE | \ + CFG_CMD_I2C | \ + CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if 0 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + * set PLL multiplication factor + */ +#if defined(CONFIG_133MHz) + /* for 133 MHz, we use a 10 MHz clock: + * MFN = 0x09, MFD = 0x1D, S = 0, MFI = 13 + */ +#define CFG_PLPRCR \ + ( 9 << PLPRCR_MFN_SHIFT | 0x1D << PLPRCR_MFD_SHIFT | \ + 0 << PLPRCR_S_SHIFT | 0x0D << PLPRCR_MFI_SHIFT | \ + PLPRCR_TEXPS ) +#elif defined(CONFIG_80MHz) /* for 80 MHz, we use a 16 MHz clock * 5 */ +#define CFG_PLPRCR \ + ( (5-1)<<PLPRCR_MFI_SHIFT | PLPRCR_TEXPS ) +#else /* up to 66 MHz we use a 1:1 clock */ +#define CFG_PLPRCR ( PLPRCR_SPLSS | PLPRCR_TEXPS ) +#endif /* CONFIG_??MHz */ + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#if defined(CONFIG_133MHz) /* for 133 MHz, we use a 10 MHz clock * 13 */ +#define CFG_SCCR (/* SCCR_TBS | */ \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) +#elif defined(CONFIG_80MHz) /* for 80 MHz, we use a 16 MHz clock * 5 */ +#define CFG_SCCR (/* SCCR_TBS | */ \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) +#else /* up to 66 MHz we use a 1:1 clock */ +#define CFG_SCCR (SCCR_TBS | \ + SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) +#endif /* CONFIG_??MHz */ + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CFG_PCMCIA_MEM_ADDR (0xE0000000) +#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_DMA_ADDR (0xE4000000) +#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_IO_ADDR (0xEC000000) +#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0100 + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: + */ +#if defined(CONFIG_133MHz) +/* 133 MHz CPU - 66 MHz bus: */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) +#elif defined(CONFIG_100MHz) +/* 100 MHz CPU - 50 MHz bus: */ +#elif defined(CONFIG_80MHz) +/* 80 MHz CPU - 40 MHz bus: ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | 0 | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) +#elif defined(CONFIG_66MHz) +/* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) +#else /* 50 MHz */ +/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_2_CLK | OR_EHTR | OR_BI) +#endif /*CONFIG_??MHz */ + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) + +#define CFG_OR1_REMAP CFG_OR0_REMAP +#define CFG_OR1_PRELIM CFG_OR0_PRELIM +#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) + +/* + * BR2/3 and OR2/3 (SDRAM) + * + */ +#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ +#define SDRAM_MAX_SIZE (256 << 20) /* max 256 MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CFG_OR_TIMING_SDRAM 0x00000A00 + +#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM ) +#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +#ifndef CONFIG_CAN_DRIVER +#define CFG_OR3_PRELIM CFG_OR2_PRELIM +#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) +#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ +#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ +#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ +#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI) +#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \ + BR_PS_8 | BR_MS_UPMB | BR_V ) +#endif /* CONFIG_CAN_DRIVER */ + +/* + * Memory Periodic Timer Prescaler + * + * The Divider for PTA (refresh timer) configuration is based on an + * example SDRAM configuration (64 MBit, one bank). The adjustment to + * the number of chip selects (NCS) and the actually needed refresh + * rate is done by setting MPTPR. + * + * PTA is calculated from + * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) + * + * gclk CPU clock (not bus clock!) + * Trefresh Refresh cycle * 4 (four word bursts used) + * + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + * -------------------------------------------- + * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 + * + * 50 MHz => 50.000.000 / Divider = 98 + * 66 Mhz => 66.000.000 / Divider = 129 + * 80 Mhz => 80.000.000 / Divider = 156 + */ +#if defined(CONFIG_133MHz) +#define CFG_MAMR_PTA 129 +#elif defined(CONFIG_100MHz) +#define CFG_MAMR_PTA 98 +#elif defined(CONFIG_80MHz) +#define CFG_MAMR_PTA 156 +#elif defined(CONFIG_66MHz) +#define CFG_MAMR_PTA 129 +#else /* 50 MHz */ +#define CFG_MAMR_PTA 98 +#endif /*CONFIG_??MHz */ + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_SCC1_ENET +#define CONFIG_FEC_ENET +#define CONFIG_ETHPRIME "SCC ETHERNET" + +#endif /* __CONFIG_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 6f647f2e8b..d78b727502 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -30,24 +30,24 @@ #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ #define CONFIG_DBAU1X00 1 -#define CONFIG_AU1X00 1 /* alchemy series cpu */ +#define CONFIG_AU1X00 1 /* alchemy series cpu */ #ifdef CONFIG_DBAU1000 /* Also known as Merlot */ -#define CONFIG_AU1000 1 +#define CONFIG_AU1000 1 #else #ifdef CONFIG_DBAU1100 -#define CONFIG_AU1100 1 +#define CONFIG_AU1100 1 #else #ifdef CONFIG_DBAU1500 -#define CONFIG_AU1500 1 -#else +#define CONFIG_AU1500 1 +#else #error "No valid board set" #endif #endif #endif -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ +#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ @@ -158,7 +158,7 @@ #define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR -/* Offset for data I/O */ +/* Offset for data I/O */ #define CFG_ATA_DATA_OFFSET 8 /* Offset for normal register accesses */ diff --git a/include/dataflash.h b/include/dataflash.h index c40401638a..650454e7ee 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -91,7 +91,6 @@ typedef struct _AT91S_DataFlash { } AT91S_DataFlash, *AT91PS_DataFlash; - typedef struct _AT91S_DATAFLASH_INFO { AT91S_DataflashDesc Desc; diff --git a/include/flash.h b/include/flash.h index 800fb4dcdd..a0c9cadc28 100644 --- a/include/flash.h +++ b/include/flash.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000, 2001 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -165,10 +165,13 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/ #define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */ -#define AMD_ID_LV640U_2 0x220C220C /* 2d ID word for AM29LV640M at 0x38 */ -#define AMD_ID_LV640U_3 0x22012201 /* 3d ID word for AM29LV640M at 0x3c */ -#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */ -#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */ +#define AMD_ID_LV640U_2 0x220C220C /* 2d ID word for AM29LV640M at 0x38 */ +#define AMD_ID_LV640U_3 0x22012201 /* 3d ID word for AM29LV640M at 0x3c */ +#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */ +#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */ + +#define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */ +#define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */ #define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */ @@ -322,13 +325,15 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */ #define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */ #define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */ -#define FLASH_AMLV320U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */ +#define FLASH_AMLV320U 0x00A2 /* AMD 29LV320M ( 32M = 2M x 16 ) */ #define FLASH_AMLV640U 0x00A4 /* AMD 29LV640M ( 64M = 4M x 16 ) */ #define FLASH_AMLV128U 0x00A6 /* AMD 29LV128M ( 128M = 8M x 16 ) */ +#define FLASH_AMLV320B 0x00A7 /* AMD 29LV320MB ( 32M = 2M x 16 ) */ +#define FLASH_AMLV320T 0x00A8 /* AMD 29LV320MT ( 32M = 2M x 16 ) */ /* Intel 28F256L18T 256M = 128K x 255 + 32k x 4 */ -#define FLASH_28F256L18T 0x00A8 -#define FLASH_AMDL163T 0x00A2 /* AMD AM29DL163T (2M x 16 ) */ -#define FLASH_AMDL163B 0x00A3 +#define FLASH_28F256L18T 0x00B0 +#define FLASH_AMDL163T 0x00B2 /* AMD AM29DL163T (2M x 16 ) */ +#define FLASH_AMDL163B 0x00B3 #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */ diff --git a/include/mpc8xx.h b/include/mpc8xx.h index 4c0c73c765..847c2b4b6b 100644 --- a/include/mpc8xx.h +++ b/include/mpc8xx.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -135,18 +135,18 @@ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 */ #ifdef CONFIG_MPC866_et_al -#define PLPRCR_MF_MSK 0xffff001e /* Multiplication factor + PDF bits */ -#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */ -#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/ -#define PLPRCR_MFD_MSK 0x07c00000 /* Multiplication factor denominator bits */ -#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/ +#define PLPRCR_MF_MSK 0xFFFF001E /* Multiplication factor + PDF bits */ +#define PLPRCR_MFN_MSK 0xF8000000 /* Multiplication factor numerator bits */ +#define PLPRCR_MFN_SHIFT 27 /* Multiplication factor numerator shift*/ +#define PLPRCR_MFD_MSK 0x07C00000 /* Multiplication factor denominator bits */ +#define PLPRCR_MFD_SHIFT 22 /* Multiplication factor denominator shift*/ #define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */ -#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift */ -#define PLPRCR_MFI_MSK 0x000f0000 /* Multiplication factor integer bits */ -#define PLPRCR_MFI_SHIFT 0x00000010 /* Multiplication factor integer shift */ +#define PLPRCR_S_SHIFT 20 /* Multiplication factor integer shift */ +#define PLPRCR_MFI_MSK 0x000F0000 /* Multiplication factor integer bits */ +#define PLPRCR_MFI_SHIFT 16 /* Multiplication factor integer shift */ #else -#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */ -#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */ +#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */ +#define PLPRCR_MF_SHIFT 20 /* Multiplication factor shift value */ #endif #define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */ #define PLPRCR_TEXPS 0x00004000 /* TEXP Status */ @@ -166,8 +166,8 @@ #define PLPRCR_LOLRE 0x00000040 /* Loss Of Lock Reset Enable */ #define PLPRCR_FIOPD 0x00000020 /* Force I/O Pull Down */ #ifdef CONFIG_MPC866_et_al -#define PLPRCR_PDF_MSK 0x0000001e /* Predivision Factor bits */ -#define PLPRCR_PDF_SHIFT 0x00000001 /* Predivision Factor shift value */ +#define PLPRCR_PDF_MSK 0x0000001E /* Predivision Factor bits */ +#define PLPRCR_PDF_SHIFT 1 /* Predivision Factor shift value */ #define PLPRCR_DBRMO 0x00000001 /* DPLL BRM Order bit */ #endif diff --git a/include/pci_ids.h b/include/pci_ids.h index a27d31c964..a5d7ed54fe 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1543,4 +1543,3 @@ #define PCI_DEVICE_ID_SMI_710 0x0710 #define PCI_DEVICE_ID_SMI_712 0x0712 #define PCI_DEVICE_ID_SMI_810 0x0810 - diff --git a/lib_m68k/board.c b/lib_m68k/board.c index b4c61195a1..0bf637d59d 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -310,7 +310,7 @@ void board_init_final (ulong dest_addr) bd_t *bd; bd = gd->bd; - // icache_enable(); /* it's time to enable the instruction cache */ + /* icache_enable(); /XX* it's time to enable the instruction cache */ /* * Setup trap handlers diff --git a/lib_nios/board.c b/lib_nios/board.c index ff0d9f5c76..0bbedfdaee 100644 --- a/lib_nios/board.c +++ b/lib_nios/board.c @@ -174,4 +174,3 @@ void hang (void) puts("### ERROR ### Please reset board ###\n"); for (;;); } - diff --git a/lib_ppc/board.c b/lib_ppc/board.c index ea8adb91e0..8e05df16de 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2002 + * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this diff --git a/lib_ppc/interrupts.c b/lib_ppc/interrupts.c index 1e540a5c3f..b803952bad 100644 --- a/lib_ppc/interrupts.c +++ b/lib_ppc/interrupts.c @@ -46,11 +46,11 @@ static unsigned decrementer_count; /* count value for 1e6/HZ microseconds */ static __inline__ unsigned long get_msr (void) { - unsigned long msr; + unsigned long msr; - asm volatile ("mfmsr %0":"=r" (msr):); + asm volatile ("mfmsr %0":"=r" (msr):); - return msr; + return msr; } static __inline__ void set_msr (unsigned long msr) @@ -93,7 +93,7 @@ int interrupt_init (void) { int ret; - /* call cpu specific function from $(CPU)/interrupts.c */ + /* call cpu specific function from $(CPU)/interrupts.c */ ret = interrupt_init_cpu (&decrementer_count); if (ret) @@ -124,7 +124,7 @@ void timer_interrupt (struct pt_regs *regs) #endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */ #ifdef CONFIG_STATUS_LED - status_led_tick (timestamp); + status_led_tick (timestamp); #endif /* CONFIG_STATUS_LED */ #ifdef CONFIG_SHOW_ACTIVITY @@ -1,5 +1,5 @@ /* - * (C) Copyright 2001, 2002 + * (C) Copyright 2001-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -217,9 +217,8 @@ void eth_set_enetaddr(int num, char *addr) { char *end; int i; -#ifdef DEBUG - printf("eth_set_enetaddr(num=%d, addr=%s)\n", num, addr); -#endif + debug ("eth_set_enetaddr(num=%d, addr=%s)\n", num, addr); + if (!eth_devices) return; @@ -237,14 +236,12 @@ void eth_set_enetaddr(int num, char *addr) { return; } -#ifdef DEBUG - printf("Setting new HW address on %s\n", dev->name); - printf("New Address is " - "%02X:%02X:%02X:%02X:%02X:%02X\n", - dev->enetaddr[0], dev->enetaddr[1], - dev->enetaddr[2], dev->enetaddr[3], - dev->enetaddr[4], dev->enetaddr[5]); -#endif + debug ( "Setting new HW address on %s\n" + "New Address is %02X:%02X:%02X:%02X:%02X:%02X\n", + dev->name, + dev->enetaddr[0], dev->enetaddr[1], + dev->enetaddr[2], dev->enetaddr[3], + dev->enetaddr[4], dev->enetaddr[5]); memcpy(dev->enetaddr, enetaddr, 6); } @@ -258,19 +255,14 @@ int eth_init(bd_t *bis) old_current = eth_current; do { -#ifdef DEBUG - printf("Trying %s\n", eth_current->name); -#endif + debug ("Trying %s\n", eth_current->name); if (eth_current->init(eth_current, bis)) { eth_current->state = ETH_STATE_ACTIVE; return 1; } - -#ifdef DEBUG - puts ("FAIL\n"); -#endif + debug ("FAIL\n"); eth_try_another(0); } while (old_current != eth_current); |