diff options
62 files changed, 2403 insertions, 199 deletions
@@ -946,7 +946,8 @@ u-boot-nand.gph: u-boot.bin FORCE ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \ + u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE $(call if_changed,pad_cat) endif diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 43700c32ee..bd774d42a8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -663,30 +663,8 @@ config TARGET_SOCFPGA_CYCLONE5 select CPU_V7 select SUPPORT_SPL -config TARGET_SUN4I - bool "Support sun4i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN5I - bool "Support sun5i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN6I - bool "Support sun6i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN7I - bool "Support sun7i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN8I - bool "Support sun8i" - select CPU_V7 - select SUPPORT_SPL +config ARCH_SUNXI + bool "Support sunxi (Allwinner) SoCs" config TARGET_SNOWBALL bool "Support snowball" diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 24f1daee64..82dbf764e4 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,13 +11,13 @@ obj-y += timer.o obj-y += board.o obj-y += clock.o obj-y += pinmux.o -obj-$(CONFIG_SUN6I) += prcm.o -obj-$(CONFIG_SUN8I) += prcm.o -obj-$(CONFIG_SUN4I) += clock_sun4i.o -obj-$(CONFIG_SUN5I) += clock_sun4i.o -obj-$(CONFIG_SUN6I) += clock_sun6i.o -obj-$(CONFIG_SUN7I) += clock_sun4i.o -obj-$(CONFIG_SUN8I) += clock_sun6i.o +obj-$(CONFIG_MACH_SUN6I) += prcm.o +obj-$(CONFIG_MACH_SUN8I) += prcm.o +obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o +obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o +obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o +obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o +obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o ifndef CONFIG_SPL_BUILD obj-y += cpu_info.o @@ -27,9 +27,9 @@ endif endif ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_SUN4I) += dram.o -obj-$(CONFIG_SUN5I) += dram.o -obj-$(CONFIG_SUN7I) += dram.o +obj-$(CONFIG_MACH_SUN4I) += dram.o +obj-$(CONFIG_MACH_SUN5I) += dram.o +obj-$(CONFIG_MACH_SUN7I) += dram.o ifdef CONFIG_SPL_FEL obj-y += start.o endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 06eb6768e8..6c812fc6e9 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -51,7 +51,7 @@ u32 spl_boot_mode(void) int gpio_init(void) { #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); @@ -59,23 +59,23 @@ int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPF(4), 1); -#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) +#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I) +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I) sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX); sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX); sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I) +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX); sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX); sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP); @@ -88,7 +88,7 @@ int gpio_init(void) void reset_cpu(ulong addr) { -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) static const struct sunxi_wdog *wdog = &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; @@ -100,7 +100,7 @@ void reset_cpu(ulong addr) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } -#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */ +#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */ static const struct sunxi_wdog *wdog = ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; @@ -114,8 +114,8 @@ void reset_cpu(ulong addr) /* do some early init */ void s_init(void) { -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \ - defined CONFIG_SUN6I || defined CONFIG_SUN8I) +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \ + defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I) /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ asm volatile( "mrc p15, 0, r0, c1, c0, 1\n" diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index 4a0d64fb30..a0e49d179f 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -35,7 +35,7 @@ void clock_init_safe(void) APB0_DIV_1 << APB0_DIV_SHIFT | CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, &ccm->cpu_ahb_apb0_cfg); -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA); #endif writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 4f2a09cd2e..41b9add297 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -13,9 +13,9 @@ #ifdef CONFIG_DISPLAY_CPUINFO int print_cpuinfo(void) { -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I puts("CPU: Allwinner A10 (SUN4I)\n"); -#elif defined CONFIG_SUN5I +#elif defined CONFIG_MACH_SUN5I u32 val = readl(SUNXI_SID_BASE + 0x08); switch ((val >> 12) & 0xf) { case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break; @@ -23,11 +23,11 @@ int print_cpuinfo(void) case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; default: puts("CPU: Allwinner A1X (SUN5I)\n"); } -#elif defined CONFIG_SUN6I +#elif defined CONFIG_MACH_SUN6I puts("CPU: Allwinner A31 (SUN6I)\n"); -#elif defined CONFIG_SUN7I +#elif defined CONFIG_MACH_SUN7I puts("CPU: Allwinner A20 (SUN7I)\n"); -#elif defined CONFIG_SUN8I +#elif defined CONFIG_MACH_SUN8I puts("CPU: Allwinner A23 (SUN8I)\n"); #else #warning Please update cpu_info.c with correct CPU information diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 3cf3cbf19a..dc9fdb930b 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -74,7 +74,7 @@ static void mctl_ddr3_reset(void) struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I struct sunxi_timer_reg *timer = (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; u32 reg_val; @@ -113,7 +113,7 @@ static void mctl_set_drive(void) { struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), #else clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3), @@ -202,7 +202,7 @@ static void mctl_enable_dllx(u32 phase) } static u32 hpcr_value[32] = { -#ifdef CONFIG_SUN5I +#ifdef CONFIG_MACH_SUN5I 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, @@ -212,7 +212,7 @@ static u32 hpcr_value[32] = { 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0 #endif -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0, 0, 0, 0, 0, 0, @@ -222,7 +222,7 @@ static u32 hpcr_value[32] = { 0x1035, 0x1031, 0x0731, 0x1035, 0x1031, 0x0301, 0x0301, 0x0731 #endif -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0, 0, 0, 0, @@ -304,7 +304,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) /* reset GPS */ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); @@ -318,7 +318,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) /* PLL5P and PLL6 are the potential clock sources for MBUS */ pll6x_clk = clock_get_pll6() / 1000000; -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ #endif pll5p_clk = clock_get_pll5p() / 1000000; @@ -348,7 +348,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) * open DRAMC AHB & DLL register clock * close it first */ -#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); #else clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM); @@ -356,7 +356,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) udelay(22); /* then open it */ -#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); #else setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM); @@ -417,7 +417,7 @@ static int dramc_scan_readpipe(void) static void dramc_clock_output_en(u32 on) { -#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; if (on) @@ -425,7 +425,7 @@ static void dramc_clock_output_en(u32 on) else clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); #endif -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; if (on) setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); @@ -527,7 +527,7 @@ static void mctl_set_impedance(u32 zq, u32 odt_en) u32 reg_val; u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF; -#ifndef CONFIG_SUN7I +#ifndef CONFIG_MACH_SUN7I /* Appears that some kind of automatically initiated default * ZQ calibration is already in progress at this point on sun4i/sun5i * hardware, but not on sun7i. So it is reasonable to wait for its @@ -539,7 +539,7 @@ static void mctl_set_impedance(u32 zq, u32 odt_en) if (!odt_en) return; -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I /* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock * unless bit 24 is set in SDR_ZQCR1. Not much is known about the * SDR_ZQCR1 register, but there are hints indicating that it might @@ -597,7 +597,7 @@ static unsigned long dramc_init_helper(struct dram_para *para) /* dram clock off */ dramc_clock_output_en(0); -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I /* select dram controller 1 */ writel(DRAM_CSEL_MAGIC, &dram->csel); #endif @@ -654,7 +654,7 @@ static unsigned long dramc_init_helper(struct dram_para *para) writel(para->tpr2, &dram->tpr2); reg_val = DRAM_MR_BURST_LENGTH(0x0); -#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) +#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)) reg_val |= DRAM_MR_POWER_DOWN; #endif reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); @@ -668,7 +668,7 @@ static unsigned long dramc_init_helper(struct dram_para *para) /* disable drift compensation and set passive DQS window mode */ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I /* Command rate timing mode 2T & 1T */ if (para->tpr4 & 0x1) setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); @@ -718,7 +718,7 @@ unsigned long dramc_init(struct dram_para *para) /* try to autodetect the DRAM bus width and density */ para->io_width = 16; para->bus_width = 32; -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) /* only A0-A14 address lines on A10/A13, limiting max density to 4096 */ para->density = 4096; #else diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c index 1f2843fcac..b026f78ca5 100644 --- a/arch/arm/cpu/armv7/sunxi/pinmux.c +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -10,32 +10,42 @@ #include <asm/io.h> #include <asm/arch/gpio.h> -int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val) { - u32 bank = GPIO_BANK(pin); - u32 index = GPIO_CFG_INDEX(pin); - u32 offset = GPIO_CFG_OFFSET(pin); - struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + u32 index = GPIO_CFG_INDEX(bank_offset); + u32 offset = GPIO_CFG_OFFSET(bank_offset); clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset); - - return 0; } -int sunxi_gpio_get_cfgpin(u32 pin) +void sunxi_gpio_set_cfgpin(u32 pin, u32 val) { - u32 cfg; u32 bank = GPIO_BANK(pin); - u32 index = GPIO_CFG_INDEX(pin); - u32 offset = GPIO_CFG_OFFSET(pin); struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + sunxi_gpio_set_cfgbank(pio, pin, val); +} + +int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset) +{ + u32 index = GPIO_CFG_INDEX(bank_offset); + u32 offset = GPIO_CFG_OFFSET(bank_offset); + u32 cfg; + cfg = readl(&pio->cfg[0] + index); cfg >>= offset; return cfg & 0xf; } +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 bank = GPIO_BANK(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + return sunxi_gpio_get_cfgbank(pio, pin); +} + int sunxi_gpio_set_drv(u32 pin, u32 val) { u32 bank = GPIO_BANK(pin); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c34606334d..52f8926894 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_MACH_SUN7I) += sun7i-a20-pcduino3.dtb dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts new file mode 100644 index 0000000000..f7cc8e7a09 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -0,0 +1,177 @@ +/* + * Copyright 2014 Zoltan HERPAI + * Zoltan HERPAI <wigyori@uid0.hu> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "LinkSprite pcDuino3"; + compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; + + chosen { + stdout-path = &uart0; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + }; + + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3>; + + tx { + label = "pcduino3:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino3:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino3>; + #address-cells = <1>; + #size-cells = <0>; + button@0 { + label = "Key Back"; + linux,code = <KEY_BACK>; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + button@1 { + label = "Key Home"; + linux,code = <KEY_HOME>; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Key Menu"; + linux,code = <KEY_MENU>; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_ahci_5v: ahci-5v { + gpio = <&pio 7 2 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi new file mode 100644 index 0000000000..4011628c73 --- /dev/null +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -0,0 +1,988 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + ethernet0 = &gmac; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll5: clk@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + + pll8: clk@01c20040 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20040 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8"; + }; + + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; + clock-output-names = "cpu"; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + clock-output-names = "ahb"; + }; + + ahb_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun7i-a20-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", + "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", + "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms", + "ahb_nand", "ahb_sdram", "ahb_ace", + "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", + "ahb_spi2", "ahb_spi3", "ahb_sata", + "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0", + "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0", + "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_gmac", "ahb_mp", + "ahb_mali"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun7i-a20-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis0", "apb0_iis1", + "apb0_pio", "apb0_ir0", "apb0_ir1", + "apb0_iis2", "apb0_keypad"; + }; + + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1_mux"; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + clock-output-names = "apb1"; + }; + + apb1_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun7i-a20-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_i2c3", "apb1_can", + "apb1_scr", "apb1_ps20", "apb1_ps21", + "apb1_i2c4", "apb1_uart0", "apb1_uart1", + "apb1_uart2", "apb1_uart3", "apb1_uart4", + "apb1_uart5", "apb1_uart6", "apb1_uart7"; + }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc3"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + pata_clk: clk@01c200ac { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200ac 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "pata"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + ir1_clk: clk@01c200b4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir1"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + }; + + spi3_clk: clk@01c200d4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200d4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; + clock-output-names = "mbus"; + }; + + /* + * The following two are dummy clocks, placeholders used in the gmac_tx + * clock. The gmac driver will choose one parent depending on the PHY + * interface mode, using clk_set_rate auto-reparenting. + * The actual TX clock rate is not controlled by the gmac_tx clock. + */ + mii_phy_tx_clk: clk@2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: clk@3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@01c20164 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c20164 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + + /* + * Dummy clock used by output clocks + */ + osc24M_32k: clk@1 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <750>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc24M_32k"; + }; + + clk_out_a: clk@01c201f0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f0 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_a"; + }; + + clk_out_b: clk@01c201f4 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f4 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_b"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nmi_intc: interrupt-controller@01c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupts = <0 0 4>; + }; + + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <0 10 4>; + clocks = <&ahb_gates 20>, <&spi0_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <0 11 4>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <0 55 4>; + clocks = <&ahb_gates 17>; + status = "disabled"; + }; + + mdio@01c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 33 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 34 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 35 4>; + status = "disabled"; + }; + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun7i-a20-usb-phy"; + reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb1_reset", "usb2_reset"; + status = "disabled"; + }; + + ehci0: usb@01c14000 { + compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <0 39 4>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c14400 { + compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; + reg = <0x01c14400 0x100>; + interrupts = <0 64 4>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <0 12 4>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ahci: sata@01c18000 { + compatible = "allwinner,sun4i-a10-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <0 56 4>; + clocks = <&pll6 0>, <&ahb_gates 25>; + status = "disabled"; + }; + + ehci1: usb@01c1c000 { + compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = <0 40 4>; + clocks = <&ahb_gates 3>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1c400 { + compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <0 65 4>; + clocks = <&usb_clk 7>, <&ahb_gates 4>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + spi3: spi@01c1f000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c1f000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb_gates 23>, <&spi3_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun7i-a20-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <0 28 4>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart2_pins_a: uart2@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "uart2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart6_pins_a: uart6@0 { + allwinner,pins = "PI12", "PI13"; + allwinner,function = "uart6"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart7_pins_a: uart7@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "uart7"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "gmac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <3>; + allwinner,pull = <0>; + }; + + spi1_pins_a: spi1@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + spi2_pins_a: spi2@0 { + allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,function = "spi2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + ir0_pins_a: ir0@0 { + allwinner,pins = "PB3","PB4"; + allwinner,function = "ir0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + ir1_pins_a: ir1@0 { + allwinner,pins = "PB22","PB23"; + allwinner,function = "ir1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <0 22 4>, + <0 23 4>, + <0 24 4>, + <0 25 4>, + <0 67 4>, + <0 68 4>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + rtc: rtc@01c20d00 { + compatible = "allwinner,sun7i-a20-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <0 24 4>; + }; + + pwm: pwm@01c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <0 5 4>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + ir1: ir@01c21c00 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 7>, <&ir1_clk>; + clock-names = "apb", "ir"; + interrupts = <0 6 4>; + reg = <0x01c21c00 0x40>; + status = "disabled"; + }; + + sid: eeprom@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <0 29 4>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 17 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 20>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <0 18 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 21>; + status = "disabled"; + }; + + uart6: serial@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <0 19 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 22>; + status = "disabled"; + }; + + uart7: serial@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <0 20 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 23>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 7 4>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 8 4>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 9 4>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@01c2b800 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = <0 88 4>; + clocks = <&apb1_gates 3>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@01c2c000 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2c000 0x400>; + interrupts = <0 89 4>; + clocks = <&apb1_gates 15>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac: ethernet@01c50000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c50000 0x10000>; + interrupts = <0 85 4>; + interrupt-names = "macirq"; + clocks = <&ahb_gates 49>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + hstimer@01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 81 4>, + <0 82 4>, + <0 83 4>, + <0 84 4>; + clocks = <&ahb_gates 28>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + }; +}; diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi new file mode 100644 index 0000000000..3d021efd1a --- /dev/null +++ b/arch/arm/dts/sunxi-common-regulators.dtsi @@ -0,0 +1,89 @@ +/* + * sunxi boards common regulator (ahci target power supply, usb-vbus) code + * + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc@01c00000 { + pio: pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PB8"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; + + reg_ahci_5v: ahci-5v { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&ahci_pwr_pin_a>; + regulator-name = "ahci-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 1 8 0>; + status = "disabled"; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_a>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 6 0>; + status = "disabled"; + }; + + reg_usb2_vbus: usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_a>; + regulator-name = "usb2-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 3 0>; + status = "disabled"; + }; + + reg_vcc3v0: vcc3v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index c562f621c2..42382a8ae2 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -15,7 +15,7 @@ #define CLK_GATE_CLOSE 0x0 /* clock control module regs definition */ -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) #include <asm/arch/clock_sun6i.h> #else #include <asm/arch/clock_sun4i.h> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 7bb649950a..437dd35b68 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -155,7 +155,7 @@ enum sunxi_gpio_number { #define SUNXI_GPF2_SDC0 2 -#ifdef CONFIG_SUN8I +#ifdef CONFIG_MACH_SUN8I #define SUNXI_GPF2_UART0_TX 3 #define SUNXI_GPF4_UART0_RX 3 #else @@ -180,7 +180,9 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_PULL_UP 1 #define SUNXI_GPIO_PULL_DOWN 2 -int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val); +void sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset); int sunxi_gpio_get_cfgpin(u32 pin); int sunxi_gpio_set_drv(u32 pin, u32 val); int sunxi_gpio_set_pull(u32 pin, u32 val); diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 8a216740a7..537f145564 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -43,7 +43,7 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res1[26]; -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) u32 res2[64]; #endif u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */ diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h index 03a0684c79..9a5e488a38 100644 --- a/arch/arm/include/asm/arch-sunxi/timer.h +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -67,7 +67,7 @@ struct sunxi_timer_reg { struct sunxi_timer timer[6]; /* We have 6 timers */ u8 res2[16]; struct sunxi_avs avs; -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) struct sunxi_wdog wdog; /* 0x90 */ /* XXX the following is not accurate for sun5i/sun7i */ struct sunxi_64cnt cnt64; /* 0xa0 */ @@ -77,7 +77,7 @@ struct sunxi_timer_reg { struct sunxi_tgp tgp[4]; u8 res5[8]; u32 cpu_cfg; -#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */ +#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || ... */ u8 res3[16]; struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */ #endif diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h index ccc8fa32c4..8108be97ba 100644 --- a/arch/arm/include/asm/arch-sunxi/watchdog.h +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h @@ -13,7 +13,7 @@ #define WDT_CTRL_RESTART (0x1 << 0) #define WDT_CTRL_KEY (0x0a57 << 1) -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) #define WDT_MODE_EN (0x1 << 0) #define WDT_MODE_RESET_EN (0x1 << 1) diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 28df187840..5b2d091122 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -1,12 +1,141 @@ -if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I || TARGET_SUN8I +if ARCH_SUNXI + +choice + prompt "Sunxi SoC Variant" + +config MACH_SUN4I + bool "sun4i (Allwinner A10)" + select CPU_V7 + select SUPPORT_SPL + +config MACH_SUN5I + bool "sun5i (Allwinner A13)" + select CPU_V7 + select SUPPORT_SPL + +config MACH_SUN6I + bool "sun6i (Allwinner A31)" + select CPU_V7 + +config MACH_SUN7I + bool "sun7i (Allwinner A20)" + select CPU_V7 + select SUPPORT_SPL + +config MACH_SUN8I + bool "sun8i (Allwinner A23)" + select CPU_V7 + +endchoice config SYS_CONFIG_NAME string - default "sun4i" if TARGET_SUN4I - default "sun5i" if TARGET_SUN5I - default "sun6i" if TARGET_SUN6I - default "sun7i" if TARGET_SUN7I - default "sun8i" if TARGET_SUN8I + default "sun4i" if MACH_SUN4I + default "sun5i" if MACH_SUN5I + default "sun6i" if MACH_SUN6I + default "sun7i" if MACH_SUN7I + default "sun8i" if MACH_SUN8I + +choice + prompt "Board" + +config TARGET_A10_OLINUXINO_L + bool "A10_OLINUXINO_L" + depends on MACH_SUN4I + +config TARGET_A10S_OLINUXINO_M + bool "A10S_OLINUXINO_M" + depends on MACH_SUN5I + +config TARGET_A13_OLINUXINOM + bool "A13_OLINUXINOM" + depends on MACH_SUN5I + +config TARGET_A13_OLINUXINO + bool "A13_OLINUXINO" + depends on MACH_SUN5I + +config TARGET_A20_OLINUXINO_L2 + bool "A20_OLINUXINO_L2" + depends on MACH_SUN7I + +config TARGET_A20_OLINUXINO_L + bool "A20_OLINUXINO_L" + depends on MACH_SUN7I + +config TARGET_A20_OLINUXINO_M + bool "A20_OLINUXINO_M" + depends on MACH_SUN7I + +config TARGET_AUXTEK_T004 + bool "AUXTEK_T004" + depends on MACH_SUN5I + +config TARGET_BANANAPI + bool "BANANAPI" + depends on MACH_SUN7I + +config TARGET_COLOMBUS + bool "COLOMBUS" + depends on MACH_SUN6I + +config TARGET_CUBIEBOARD2 + bool "CUBIEBOARD2" + depends on MACH_SUN7I + +config TARGET_CUBIEBOARD + bool "CUBIEBOARD" + depends on MACH_SUN4I + +config TARGET_CUBIETRUCK + bool "CUBIETRUCK" + depends on MACH_SUN7I + +config TARGET_IPPO_Q8H_V5 + bool "IPPO_Q8H_V5" + depends on MACH_SUN8I + +config TARGET_PCDUINO3 + bool "PCDUINO3" + depends on MACH_SUN7I + +config TARGET_MELE_A1000G + bool "MELE_A1000G" + depends on MACH_SUN4I + +config TARGET_MELE_A1000 + bool "MELE_A1000" + depends on MACH_SUN4I + +config TARGET_MELE_M3 + bool "MELE_M3" + depends on MACH_SUN7I + +config TARGET_MINI_X_1GB + bool "MINI_X_1GB" + depends on MACH_SUN4I + +config TARGET_MINI_X + bool "MINI_X" + depends on MACH_SUN4I + +config TARGET_BA10_TV_BOX + bool "BA10_TV_BOX" + depends on MACH_SUN4I + +config TARGET_I12_TVBOX + bool "I12_TVBOX" + depends on MACH_SUN7I + +config TARGET_QT840A + bool "QT840A" + depends on MACH_SUN7I + +config TARGET_R7DONGLE + bool "R7DONGLE" + depends on MACH_SUN5I + +endchoice config SYS_BOARD default "sunxi" @@ -14,6 +143,11 @@ config SYS_BOARD config SYS_SOC default "sunxi" +config SPL_FEL + bool "SPL/FEL mode support" + depends on SPL + default n + config FDTFILE string "Default fdtfile env setting for this board" diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index febd126cb8..b3c77a83cb 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -22,6 +22,7 @@ F: configs/A20-OLinuXino_MICRO_defconfig F: configs/Bananapi_defconfig F: configs/i12-tvbox_defconfig F: configs/Linksprite_pcDuino3_defconfig +F: configs/Linksprite_pcDuino3_fdt_defconfig F: configs/qt840a_defconfig CUBIEBOARD2 BOARD @@ -52,6 +53,6 @@ S: Maintained F: configs/Colombus_defconfig IPPO-Q8H-V5 BOARD -M: CHen-Yu Tsai <wens@csie.org> +M: Chen-Yu Tsai <wens@csie.org> S: Maintained F: configs/Ippo_q8h_v5_defconfig diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 6a2e4c9d5b..b84ff9b8ef 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -11,26 +11,26 @@ obj-y += board.o obj-$(CONFIG_SUNXI_GMAC) += gmac.o obj-$(CONFIG_SUNXI_AHCI) += ahci.o -obj-$(CONFIG_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o -obj-$(CONFIG_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o -obj-$(CONFIG_A13_OLINUXINO) += dram_a13_olinuxino.o -obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o -obj-$(CONFIG_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o -obj-$(CONFIG_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o -obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_TARGET_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o +obj-$(CONFIG_TARGET_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o +obj-$(CONFIG_TARGET_A13_OLINUXINO) += dram_a13_olinuxino.o +obj-$(CONFIG_TARGET_A13_OLINUXINOM) += dram_a13_oli_micro.o +obj-$(CONFIG_TARGET_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o +obj-$(CONFIG_TARGET_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o +obj-$(CONFIG_TARGET_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o # This is not a typo, uses the same mem settings as the a10s-olinuxino-m -obj-$(CONFIG_AUXTEK_T004) += dram_a10s_olinuxino_m.o -obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o -obj-$(CONFIG_BANANAPI) += dram_bananapi.o -obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o -obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o -obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o -obj-$(CONFIG_I12_TVBOX) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_MELE_A1000) += dram_sun4i_360_512.o -obj-$(CONFIG_MELE_A1000G) += dram_sun4i_360_1024_iow8.o -obj-$(CONFIG_MELE_M3) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_MINI_X) += dram_sun4i_360_512.o -obj-$(CONFIG_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o -obj-$(CONFIG_PCDUINO3) += dram_linksprite_pcduino3.o -obj-$(CONFIG_QT840A) += dram_sun7i_384_512_busw16_iow16.o -obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o +obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o +obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o +obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o +obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o +obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o +obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o +obj-$(CONFIG_TARGET_I12_TVBOX) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_TARGET_MELE_A1000) += dram_sun4i_360_512.o +obj-$(CONFIG_TARGET_MELE_A1000G) += dram_sun4i_360_1024_iow8.o +obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o +obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o +obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o +obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o +obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o diff --git a/board/sunxi/ahci.c b/board/sunxi/ahci.c index 0c262eabb7..5e123285b0 100644 --- a/board/sunxi/ahci.c +++ b/board/sunxi/ahci.c @@ -74,6 +74,7 @@ void scsi_init(void) { printf("SUNXI SCSI INIT\n"); #ifdef CONFIG_SATAPWR + gpio_request(CONFIG_SATAPWR, "satapwr"); gpio_direction_output(CONFIG_SATAPWR, 1); #endif diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index f9922936ab..f0cbf21025 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A10_OLINUXINO_L,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_A10_OLINUXINO_L=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 2aad834fa8..64756755bf 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -1,8 +1,10 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)" CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 +S:CONFIG_MMC0_CD_PIN="PG1" +S:CONFIG_MMC1_CD_PIN="PG13" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_A10S_OLINUXINO_M=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 9ae7b12851..d8b12391d8 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINOM,CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_A13_OLINUXINOM=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 2c726f308a..91039dfc96 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINO,CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_A13_OLINUXINO=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 75ef872780..f80b98ae90 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_A20_OLINUXINO_L2=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index ca79fd58aa..d9e66b7155 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_A20_OLINUXINO_L=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 0e0a7def2d..1b9668d46d 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -1,8 +1,10 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 +S:CONFIG_MMC0_CD_PIN="PH1" +S:CONFIG_MMC3_CD_PIN="PH11" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_A20_OLINUXINO_M=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index ed06f5700c..5b06ea0aea 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AUXTEK_T004,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_AUXTEK_T004=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index d59cf72eaa..196f6824cb 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="BANANAPI,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" CONFIG_FDTFILE="sun7i-a20-bananapi.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_BANANAPI=y diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 16800de2bc..89291f90e9 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -1,4 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="COLOMBUS" CONFIG_ARM=y -CONFIG_TARGET_SUN6I=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN6I=y +CONFIG_TARGET_COLOMBUS=y CONFIG_FDTFILE="sun6i-a31-colombus.dtb" diff --git a/configs/Cubieboard2_FEL_defconfig b/configs/Cubieboard2_FEL_defconfig deleted file mode 100644 index 353b04a3b1..0000000000 --- a/configs/Cubieboard2_FEL_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb" -+S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 11a0c5ff37..7e7a1ca398 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_CUBIEBOARD2=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 8c1ff9584e..0bc45fd2cb 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_CUBIEBOARD=y diff --git a/configs/Cubietruck_FEL_defconfig b/configs/Cubietruck_FEL_defconfig deleted file mode 100644 index 23c5efb18a..0000000000 --- a/configs/Cubietruck_FEL_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" -CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb" -+S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 1389f2138b..b1f9f936fa 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_CUBIETRUCK=y diff --git a/configs/Ippo_q8h_defconfig b/configs/Ippo_q8h_defconfig deleted file mode 100644 index 781f13785b..0000000000 --- a/configs/Ippo_q8h_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="IPPO_Q8H_V5,CONS_INDEX=5" -CONFIG_ARM=y -CONFIG_TARGET_SUN8I=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb" diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig new file mode 100644 index 0000000000..fc67bd9d56 --- /dev/null +++ b/configs/Ippo_q8h_v5_defconfig @@ -0,0 +1,6 @@ +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I=y +CONFIG_TARGET_IPPO_Q8H_V5=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb" diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index efc5301789..a26ff0a70f 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="PCDUINO3,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_PCDUINO3=y diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig new file mode 100644 index 0000000000..a33f3a7981 --- /dev/null +++ b/configs/Linksprite_pcDuino3_fdt_defconfig @@ -0,0 +1,11 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb" +CONFIG_DM=y +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" +CONFIG_OF_CONTROL=y +CONFIG_OF_SEPARATE=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_PCDUINO3=y diff --git a/configs/Mele_A1000G_defconfig b/configs/Mele_A1000G_defconfig index 06c4cacc53..2f4bf72c93 100644 --- a/configs/Mele_A1000G_defconfig +++ b/configs/Mele_A1000G_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000G,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-a1000.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MELE_A1000G=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index d386c79e04..e2912b0afd 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-a1000.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MELE_A1000=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index a043ad277d..fe9ba11c39 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -1,7 +1,9 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI" CONFIG_FDTFILE="sun7i-a20-m3.dtb" +S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +S:CONFIG_MMC0_CD_PIN="PH1" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_MELE_M3=y diff --git a/configs/Mini-X-1Gb_defconfig b/configs/Mini-X-1Gb_defconfig index 5db4aa3a14..b8fea01245 100644 --- a/configs/Mini-X-1Gb_defconfig +++ b/configs/Mini-X-1Gb_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MINI_X_1GB,AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MINI_X_1GB=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 6718dcb68c..0f6bbe06b2 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MINI_X,AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MINI_X=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index 6f64875b4a..0a1abea0a8 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="BA10_TV_BOX,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)" CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_BA10_TV_BOX=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 2ef0f91828..5f5037e698 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="I12_TVBOX,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_I12_TVBOX=y diff --git a/configs/qt840a_defconfig b/configs/qt840a_defconfig index a8d4bb8845..70f8159b39 100644 --- a/configs/qt840a_defconfig +++ b/configs/qt840a_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="QT840A,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_QT840A=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 6aba94201e..7dbff40b50 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="R7DONGLE,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_R7DONGLE=y diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 0c50a8f332..44135e5bb7 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -11,9 +11,25 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> #include <asm/io.h> #include <asm/gpio.h> +#include <dm/device-internal.h> +DECLARE_GLOBAL_DATA_PTR; + +#define SUNXI_GPIOS_PER_BANK SUNXI_GPIO_A_NR + +struct sunxi_gpio_platdata { + struct sunxi_gpio *regs; + const char *bank_name; /* Name of bank, e.g. "B" */ + int gpio_count; +}; + +#ifndef CONFIG_DM_GPIO static int sunxi_gpio_output(u32 pin, u32 val) { u32 dat; @@ -100,3 +116,157 @@ int sunxi_name_to_gpio(const char *name) return -1; return group * 32 + pin; } +#endif + +#ifdef CONFIG_DM_GPIO +static int sunxi_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + + sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_INPUT); + + return 0; +} + +static int sunxi_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + + sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_OUTPUT); + clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); + + return 0; +} + +static int sunxi_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + unsigned dat; + + dat = readl(&plat->regs->dat); + dat >>= num; + + return dat & 0x1; +} + +static int sunxi_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + + clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); + return 0; +} + +static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + int func; + + func = sunxi_gpio_get_cfgbank(plat->regs, offset); + if (func == SUNXI_GPIO_OUTPUT) + return GPIOF_OUTPUT; + else if (func == SUNXI_GPIO_INPUT) + return GPIOF_INPUT; + else + return GPIOF_FUNC; +} + +static const struct dm_gpio_ops gpio_sunxi_ops = { + .direction_input = sunxi_gpio_direction_input, + .direction_output = sunxi_gpio_direction_output, + .get_value = sunxi_gpio_get_value, + .set_value = sunxi_gpio_set_value, + .get_function = sunxi_gpio_get_function, +}; + +/** + * Returns the name of a GPIO bank + * + * GPIO banks are named A, B, C, ... + * + * @bank: Bank number (0, 1..n-1) + * @return allocated string containing the name + */ +static char *gpio_bank_name(int bank) +{ + char *name; + + name = malloc(2); + if (name) { + name[0] = 'A' + bank; + name[1] = '\0'; + } + + return name; +} + +static int gpio_sunxi_probe(struct udevice *dev) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + /* Tell the uclass how many GPIOs we have */ + if (plat) { + uc_priv->gpio_count = plat->gpio_count; + uc_priv->bank_name = plat->bank_name; + } + + return 0; +} +/** + * We have a top-level GPIO device with no actual GPIOs. It has a child + * device for each Sunxi bank. + */ +static int gpio_sunxi_bind(struct udevice *parent) +{ + struct sunxi_gpio_platdata *plat = parent->platdata; + struct sunxi_gpio_reg *ctlr; + int bank; + int ret; + + /* If this is a child device, there is nothing to do here */ + if (plat) + return 0; + + ctlr = (struct sunxi_gpio_reg *)fdtdec_get_addr(gd->fdt_blob, + parent->of_offset, "reg"); + for (bank = 0; bank < SUNXI_GPIO_BANKS; bank++) { + struct sunxi_gpio_platdata *plat; + struct udevice *dev; + + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + plat->regs = &ctlr->gpio_bank[bank]; + plat->bank_name = gpio_bank_name(bank); + plat->gpio_count = SUNXI_GPIOS_PER_BANK; + + ret = device_bind(parent, parent->driver, + plat->bank_name, plat, -1, &dev); + if (ret) + return ret; + dev->of_offset = parent->of_offset; + } + + return 0; +} + +static const struct udevice_id sunxi_gpio_ids[] = { + { .compatible = "allwinner,sun7i-a20-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(gpio_sunxi) = { + .name = "gpio_sunxi", + .id = UCLASS_GPIO, + .ops = &gpio_sunxi_ops, + .of_match = sunxi_gpio_ids, + .bind = gpio_sunxi_bind, + .probe = gpio_sunxi_probe, +}; +#endif diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 16592e3d7c..231f0a0315 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -30,10 +30,22 @@ struct sunxi_mmc_host { /* support 4 mmc hosts */ struct sunxi_mmc_host mmc_host[4]; +static int sunxi_mmc_getcd_gpio(int sdc_no) +{ + switch (sdc_no) { + case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); + case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); + case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); + case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); + } + return -1; +} + static int mmc_resource_init(int sdc_no) { struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int cd_pin, ret = 0; debug("init mmc %d resource\n", sdc_no); @@ -60,7 +72,11 @@ static int mmc_resource_init(int sdc_no) } mmchost->mmc_no = sdc_no; - return 0; + cd_pin = sunxi_mmc_getcd_gpio(sdc_no); + if (cd_pin != -1) + ret = gpio_request(cd_pin, "mmc_cd"); + + return ret; } static int mmc_clk_io_on(int sdc_no) @@ -75,7 +91,7 @@ static int mmc_clk_io_on(int sdc_no) /* config ahb clock */ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) /* unassert reset */ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no)); #endif @@ -351,15 +367,9 @@ out: static int sunxi_mmc_getcd(struct mmc *mmc) { struct sunxi_mmc_host *mmchost = mmc->priv; - int cd_pin = -1; - - switch (mmchost->mmc_no) { - case 0: cd_pin = sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); break; - case 1: cd_pin = sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); break; - case 2: cd_pin = sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); break; - case 3: cd_pin = sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); break; - } + int cd_pin; + cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no); if (cd_pin == -1) return 1; @@ -385,7 +395,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; cfg->host_caps = MMC_MODE_4BIT; cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || defined(CONFIG_MACH_SUN8I) cfg->host_caps |= MMC_MODE_HC; #endif cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; @@ -393,7 +403,9 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->f_min = 400000; cfg->f_max = 52000000; - mmc_resource_init(sdc_no); + if (mmc_resource_init(sdc_no) != 0) + return NULL; + mmc_clk_io_on(sdc_no); return mmc_create(cfg, &mmc_host[sdc_no]); diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2c19ebc288..8c84942761 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o +obj-$(CONFIG_DW_SERIAL) += serial_dw.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o diff --git a/drivers/serial/serial_dw.c b/drivers/serial/serial_dw.c new file mode 100644 index 0000000000..a348f2956a --- /dev/null +++ b/drivers/serial/serial_dw.c @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> + +static const struct udevice_id dw_serial_ids[] = { + { .compatible = "snps,dw-apb-uart" }, + { } +}; + +static int dw_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = CONFIG_SYS_NS16550_CLK; + + return 0; +} + +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_dw", + .id = UCLASS_SERIAL, + .of_match = dw_serial_ids, + .ofdata_to_platdata = dw_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, +}; diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 23617b7adc..4befd57454 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -105,7 +105,7 @@ static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci) usb_phy_write(sunxi_ehci, 0x20, 0x14, 5); /* threshold adjustment disconnect */ -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I usb_phy_write(sunxi_ehci, 0x2a, 3, 2); #else usb_phy_write(sunxi_ehci, 0x2a, 2, 2); @@ -163,11 +163,16 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; + int err; /* enable common PHY only once */ if (index == 0) setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); + err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); + if (err) + return err; + sunxi_ehci_enable(sunxi_ehci); *hccr = get_io_base(sunxi_ehci->id); @@ -188,9 +193,14 @@ int ehci_hcd_stop(int index) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; + int err; sunxi_ehci_disable(sunxi_ehci); + err = gpio_free(sunxi_ehci->gpio_vbus); + if (err) + return err; + /* disable common PHY only once, for the last enabled hcd */ if (enabled_hcd_count == 1) clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index d0191a32b1..e0ec52dcde 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -11,7 +11,6 @@ /* * A10 specific configuration */ -#define CONFIG_SUN4I /* sun4i SoC generation */ #define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun4i# " diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 7b683e9c89..09f7533575 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -11,7 +11,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SUN5I /* sun5i SoC generation */ #define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun5i# " diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 93a1d965ca..b7144745c9 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,7 +14,6 @@ /* * A31 specific configuration */ -#define CONFIG_SUN6I /* sun6i SoC generation */ #define CONFIG_SYS_PROMPT "sun6i# " diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 966cbd8e83..0193826a9d 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -12,7 +12,6 @@ /* * A20 specific configuration */ -#define CONFIG_SUN7I /* sun7i SoC generation */ #define CONFIG_CLK_FULL_SPEED 912000000 #define CONFIG_SYS_PROMPT "sun7i# " diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 1c1a7cde5e..6f1fc48cf0 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -12,7 +12,6 @@ /* * A23 specific configuration */ -#define CONFIG_SUN8I /* sun8i SoC generation */ #define CONFIG_SYS_PROMPT "sun8i# " /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index cc450e02e6..ce038eddf0 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -27,6 +27,14 @@ #define CONFIG_SYS_TEXT_BASE 0x4a000000 +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) +# define CONFIG_CMD_DM +# define CONFIG_DM_GPIO +# define CONFIG_DM_SERIAL +# define CONFIG_DW_SERIAL +# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* * Display CPU information */ @@ -36,13 +44,15 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ -#define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE -#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE -#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE -#define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#ifndef CONFIG_DM_SERIAL +# define CONFIG_SYS_NS16550_REG_SIZE -4 +# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE +# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#endif /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h new file mode 100644 index 0000000000..042e7b3b62 --- /dev/null +++ b/include/dt-bindings/input/input.h @@ -0,0 +1,525 @@ +/* + * This header provides constants for most input bindings. + * + * Most input bindings include key code, matrix key code format. + * In most cases, key code and matrix key code format uses + * the standard values/macro defined in this header. + */ + +#ifndef _DT_BINDINGS_INPUT_INPUT_H +#define _DT_BINDINGS_INPUT_INPUT_H + +#define KEY_RESERVED 0 +#define KEY_ESC 1 +#define KEY_1 2 +#define KEY_2 3 +#define KEY_3 4 +#define KEY_4 5 +#define KEY_5 6 +#define KEY_6 7 +#define KEY_7 8 +#define KEY_8 9 +#define KEY_9 10 +#define KEY_0 11 +#define KEY_MINUS 12 +#define KEY_EQUAL 13 +#define KEY_BACKSPACE 14 +#define KEY_TAB 15 +#define KEY_Q 16 +#define KEY_W 17 +#define KEY_E 18 +#define KEY_R 19 +#define KEY_T 20 +#define KEY_Y 21 +#define KEY_U 22 +#define KEY_I 23 +#define KEY_O 24 +#define KEY_P 25 +#define KEY_LEFTBRACE 26 +#define KEY_RIGHTBRACE 27 +#define KEY_ENTER 28 +#define KEY_LEFTCTRL 29 +#define KEY_A 30 +#define KEY_S 31 +#define KEY_D 32 +#define KEY_F 33 +#define KEY_G 34 +#define KEY_H 35 +#define KEY_J 36 +#define KEY_K 37 +#define KEY_L 38 +#define KEY_SEMICOLON 39 +#define KEY_APOSTROPHE 40 +#define KEY_GRAVE 41 +#define KEY_LEFTSHIFT 42 +#define KEY_BACKSLASH 43 +#define KEY_Z 44 +#define KEY_X 45 +#define KEY_C 46 +#define KEY_V 47 +#define KEY_B 48 +#define KEY_N 49 +#define KEY_M 50 +#define KEY_COMMA 51 +#define KEY_DOT 52 +#define KEY_SLASH 53 +#define KEY_RIGHTSHIFT 54 +#define KEY_KPASTERISK 55 +#define KEY_LEFTALT 56 +#define KEY_SPACE 57 +#define KEY_CAPSLOCK 58 +#define KEY_F1 59 +#define KEY_F2 60 +#define KEY_F3 61 +#define KEY_F4 62 +#define KEY_F5 63 +#define KEY_F6 64 +#define KEY_F7 65 +#define KEY_F8 66 +#define KEY_F9 67 +#define KEY_F10 68 +#define KEY_NUMLOCK 69 +#define KEY_SCROLLLOCK 70 +#define KEY_KP7 71 +#define KEY_KP8 72 +#define KEY_KP9 73 +#define KEY_KPMINUS 74 +#define KEY_KP4 75 +#define KEY_KP5 76 +#define KEY_KP6 77 +#define KEY_KPPLUS 78 +#define KEY_KP1 79 +#define KEY_KP2 80 +#define KEY_KP3 81 +#define KEY_KP0 82 +#define KEY_KPDOT 83 + +#define KEY_ZENKAKUHANKAKU 85 +#define KEY_102ND 86 +#define KEY_F11 87 +#define KEY_F12 88 +#define KEY_RO 89 +#define KEY_KATAKANA 90 +#define KEY_HIRAGANA 91 +#define KEY_HENKAN 92 +#define KEY_KATAKANAHIRAGANA 93 +#define KEY_MUHENKAN 94 +#define KEY_KPJPCOMMA 95 +#define KEY_KPENTER 96 +#define KEY_RIGHTCTRL 97 +#define KEY_KPSLASH 98 +#define KEY_SYSRQ 99 +#define KEY_RIGHTALT 100 +#define KEY_LINEFEED 101 +#define KEY_HOME 102 +#define KEY_UP 103 +#define KEY_PAGEUP 104 +#define KEY_LEFT 105 +#define KEY_RIGHT 106 +#define KEY_END 107 +#define KEY_DOWN 108 +#define KEY_PAGEDOWN 109 +#define KEY_INSERT 110 +#define KEY_DELETE 111 +#define KEY_MACRO 112 +#define KEY_MUTE 113 +#define KEY_VOLUMEDOWN 114 +#define KEY_VOLUMEUP 115 +#define KEY_POWER 116 /* SC System Power Down */ +#define KEY_KPEQUAL 117 +#define KEY_KPPLUSMINUS 118 +#define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ + +#define KEY_KPCOMMA 121 +#define KEY_HANGEUL 122 +#define KEY_HANGUEL KEY_HANGEUL +#define KEY_HANJA 123 +#define KEY_YEN 124 +#define KEY_LEFTMETA 125 +#define KEY_RIGHTMETA 126 +#define KEY_COMPOSE 127 + +#define KEY_STOP 128 /* AC Stop */ +#define KEY_AGAIN 129 +#define KEY_PROPS 130 /* AC Properties */ +#define KEY_UNDO 131 /* AC Undo */ +#define KEY_FRONT 132 +#define KEY_COPY 133 /* AC Copy */ +#define KEY_OPEN 134 /* AC Open */ +#define KEY_PASTE 135 /* AC Paste */ +#define KEY_FIND 136 /* AC Search */ +#define KEY_CUT 137 /* AC Cut */ +#define KEY_HELP 138 /* AL Integrated Help Center */ +#define KEY_MENU 139 /* Menu (show menu) */ +#define KEY_CALC 140 /* AL Calculator */ +#define KEY_SETUP 141 +#define KEY_SLEEP 142 /* SC System Sleep */ +#define KEY_WAKEUP 143 /* System Wake Up */ +#define KEY_FILE 144 /* AL Local Machine Browser */ +#define KEY_SENDFILE 145 +#define KEY_DELETEFILE 146 +#define KEY_XFER 147 +#define KEY_PROG1 148 +#define KEY_PROG2 149 +#define KEY_WWW 150 /* AL Internet Browser */ +#define KEY_MSDOS 151 +#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ +#define KEY_SCREENLOCK KEY_COFFEE +#define KEY_DIRECTION 153 +#define KEY_CYCLEWINDOWS 154 +#define KEY_MAIL 155 +#define KEY_BOOKMARKS 156 /* AC Bookmarks */ +#define KEY_COMPUTER 157 +#define KEY_BACK 158 /* AC Back */ +#define KEY_FORWARD 159 /* AC Forward */ +#define KEY_CLOSECD 160 +#define KEY_EJECTCD 161 +#define KEY_EJECTCLOSECD 162 +#define KEY_NEXTSONG 163 +#define KEY_PLAYPAUSE 164 +#define KEY_PREVIOUSSONG 165 +#define KEY_STOPCD 166 +#define KEY_RECORD 167 +#define KEY_REWIND 168 +#define KEY_PHONE 169 /* Media Select Telephone */ +#define KEY_ISO 170 +#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ +#define KEY_HOMEPAGE 172 /* AC Home */ +#define KEY_REFRESH 173 /* AC Refresh */ +#define KEY_EXIT 174 /* AC Exit */ +#define KEY_MOVE 175 +#define KEY_EDIT 176 +#define KEY_SCROLLUP 177 +#define KEY_SCROLLDOWN 178 +#define KEY_KPLEFTPAREN 179 +#define KEY_KPRIGHTPAREN 180 +#define KEY_NEW 181 /* AC New */ +#define KEY_REDO 182 /* AC Redo/Repeat */ + +#define KEY_F13 183 +#define KEY_F14 184 +#define KEY_F15 185 +#define KEY_F16 186 +#define KEY_F17 187 +#define KEY_F18 188 +#define KEY_F19 189 +#define KEY_F20 190 +#define KEY_F21 191 +#define KEY_F22 192 +#define KEY_F23 193 +#define KEY_F24 194 + +#define KEY_PLAYCD 200 +#define KEY_PAUSECD 201 +#define KEY_PROG3 202 +#define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_SUSPEND 205 +#define KEY_CLOSE 206 /* AC Close */ +#define KEY_PLAY 207 +#define KEY_FASTFORWARD 208 +#define KEY_BASSBOOST 209 +#define KEY_PRINT 210 /* AC Print */ +#define KEY_HP 211 +#define KEY_CAMERA 212 +#define KEY_SOUND 213 +#define KEY_QUESTION 214 +#define KEY_EMAIL 215 +#define KEY_CHAT 216 +#define KEY_SEARCH 217 +#define KEY_CONNECT 218 +#define KEY_FINANCE 219 /* AL Checkbook/Finance */ +#define KEY_SPORT 220 +#define KEY_SHOP 221 +#define KEY_ALTERASE 222 +#define KEY_CANCEL 223 /* AC Cancel */ +#define KEY_BRIGHTNESSDOWN 224 +#define KEY_BRIGHTNESSUP 225 +#define KEY_MEDIA 226 + +#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video + outputs (Monitor/LCD/TV-out/etc) */ +#define KEY_KBDILLUMTOGGLE 228 +#define KEY_KBDILLUMDOWN 229 +#define KEY_KBDILLUMUP 230 + +#define KEY_SEND 231 /* AC Send */ +#define KEY_REPLY 232 /* AC Reply */ +#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ +#define KEY_SAVE 234 /* AC Save */ +#define KEY_DOCUMENTS 235 + +#define KEY_BATTERY 236 + +#define KEY_BLUETOOTH 237 +#define KEY_WLAN 238 +#define KEY_UWB 239 + +#define KEY_UNKNOWN 240 + +#define KEY_VIDEO_NEXT 241 /* drive next video source */ +#define KEY_VIDEO_PREV 242 /* drive previous video source */ +#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ +#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ +#define KEY_DISPLAY_OFF 245 /* display device to off state */ + +#define KEY_WIMAX 246 +#define KEY_RFKILL 247 /* Key that controls all radios */ + +#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ + +/* Code 255 is reserved for special needs of AT keyboard driver */ + +#define BTN_MISC 0x100 +#define BTN_0 0x100 +#define BTN_1 0x101 +#define BTN_2 0x102 +#define BTN_3 0x103 +#define BTN_4 0x104 +#define BTN_5 0x105 +#define BTN_6 0x106 +#define BTN_7 0x107 +#define BTN_8 0x108 +#define BTN_9 0x109 + +#define BTN_MOUSE 0x110 +#define BTN_LEFT 0x110 +#define BTN_RIGHT 0x111 +#define BTN_MIDDLE 0x112 +#define BTN_SIDE 0x113 +#define BTN_EXTRA 0x114 +#define BTN_FORWARD 0x115 +#define BTN_BACK 0x116 +#define BTN_TASK 0x117 + +#define BTN_JOYSTICK 0x120 +#define BTN_TRIGGER 0x120 +#define BTN_THUMB 0x121 +#define BTN_THUMB2 0x122 +#define BTN_TOP 0x123 +#define BTN_TOP2 0x124 +#define BTN_PINKIE 0x125 +#define BTN_BASE 0x126 +#define BTN_BASE2 0x127 +#define BTN_BASE3 0x128 +#define BTN_BASE4 0x129 +#define BTN_BASE5 0x12a +#define BTN_BASE6 0x12b +#define BTN_DEAD 0x12f + +#define BTN_GAMEPAD 0x130 +#define BTN_SOUTH 0x130 +#define BTN_A BTN_SOUTH +#define BTN_EAST 0x131 +#define BTN_B BTN_EAST +#define BTN_C 0x132 +#define BTN_NORTH 0x133 +#define BTN_X BTN_NORTH +#define BTN_WEST 0x134 +#define BTN_Y BTN_WEST +#define BTN_Z 0x135 +#define BTN_TL 0x136 +#define BTN_TR 0x137 +#define BTN_TL2 0x138 +#define BTN_TR2 0x139 +#define BTN_SELECT 0x13a +#define BTN_START 0x13b +#define BTN_MODE 0x13c +#define BTN_THUMBL 0x13d +#define BTN_THUMBR 0x13e + +#define BTN_DIGI 0x140 +#define BTN_TOOL_PEN 0x140 +#define BTN_TOOL_RUBBER 0x141 +#define BTN_TOOL_BRUSH 0x142 +#define BTN_TOOL_PENCIL 0x143 +#define BTN_TOOL_AIRBRUSH 0x144 +#define BTN_TOOL_FINGER 0x145 +#define BTN_TOOL_MOUSE 0x146 +#define BTN_TOOL_LENS 0x147 +#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ +#define BTN_TOUCH 0x14a +#define BTN_STYLUS 0x14b +#define BTN_STYLUS2 0x14c +#define BTN_TOOL_DOUBLETAP 0x14d +#define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ + +#define BTN_WHEEL 0x150 +#define BTN_GEAR_DOWN 0x150 +#define BTN_GEAR_UP 0x151 + +#define KEY_OK 0x160 +#define KEY_SELECT 0x161 +#define KEY_GOTO 0x162 +#define KEY_CLEAR 0x163 +#define KEY_POWER2 0x164 +#define KEY_OPTION 0x165 +#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ +#define KEY_TIME 0x167 +#define KEY_VENDOR 0x168 +#define KEY_ARCHIVE 0x169 +#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ +#define KEY_CHANNEL 0x16b +#define KEY_FAVORITES 0x16c +#define KEY_EPG 0x16d +#define KEY_PVR 0x16e /* Media Select Home */ +#define KEY_MHP 0x16f +#define KEY_LANGUAGE 0x170 +#define KEY_TITLE 0x171 +#define KEY_SUBTITLE 0x172 +#define KEY_ANGLE 0x173 +#define KEY_ZOOM 0x174 +#define KEY_MODE 0x175 +#define KEY_KEYBOARD 0x176 +#define KEY_SCREEN 0x177 +#define KEY_PC 0x178 /* Media Select Computer */ +#define KEY_TV 0x179 /* Media Select TV */ +#define KEY_TV2 0x17a /* Media Select Cable */ +#define KEY_VCR 0x17b /* Media Select VCR */ +#define KEY_VCR2 0x17c /* VCR Plus */ +#define KEY_SAT 0x17d /* Media Select Satellite */ +#define KEY_SAT2 0x17e +#define KEY_CD 0x17f /* Media Select CD */ +#define KEY_TAPE 0x180 /* Media Select Tape */ +#define KEY_RADIO 0x181 +#define KEY_TUNER 0x182 /* Media Select Tuner */ +#define KEY_PLAYER 0x183 +#define KEY_TEXT 0x184 +#define KEY_DVD 0x185 /* Media Select DVD */ +#define KEY_AUX 0x186 +#define KEY_MP3 0x187 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ +#define KEY_DIRECTORY 0x18a +#define KEY_LIST 0x18b +#define KEY_MEMO 0x18c /* Media Select Messages */ +#define KEY_CALENDAR 0x18d +#define KEY_RED 0x18e +#define KEY_GREEN 0x18f +#define KEY_YELLOW 0x190 +#define KEY_BLUE 0x191 +#define KEY_CHANNELUP 0x192 /* Channel Increment */ +#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ +#define KEY_FIRST 0x194 +#define KEY_LAST 0x195 /* Recall Last */ +#define KEY_AB 0x196 +#define KEY_NEXT 0x197 +#define KEY_RESTART 0x198 +#define KEY_SLOW 0x199 +#define KEY_SHUFFLE 0x19a +#define KEY_BREAK 0x19b +#define KEY_PREVIOUS 0x19c +#define KEY_DIGITS 0x19d +#define KEY_TEEN 0x19e +#define KEY_TWEN 0x19f +#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ +#define KEY_GAMES 0x1a1 /* Media Select Games */ +#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ +#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ +#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ +#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ +#define KEY_EDITOR 0x1a6 /* AL Text Editor */ +#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ +#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ +#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ +#define KEY_DATABASE 0x1aa /* AL Database App */ +#define KEY_NEWS 0x1ab /* AL Newsreader */ +#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ +#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ +#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ +#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ +#define KEY_LOGOFF 0x1b1 /* AL Logoff */ + +#define KEY_DOLLAR 0x1b2 +#define KEY_EURO 0x1b3 + +#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ +#define KEY_FRAMEFORWARD 0x1b5 +#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ + +#define KEY_DEL_EOL 0x1c0 +#define KEY_DEL_EOS 0x1c1 +#define KEY_INS_LINE 0x1c2 +#define KEY_DEL_LINE 0x1c3 + +#define KEY_FN 0x1d0 +#define KEY_FN_ESC 0x1d1 +#define KEY_FN_F1 0x1d2 +#define KEY_FN_F2 0x1d3 +#define KEY_FN_F3 0x1d4 +#define KEY_FN_F4 0x1d5 +#define KEY_FN_F5 0x1d6 +#define KEY_FN_F6 0x1d7 +#define KEY_FN_F7 0x1d8 +#define KEY_FN_F8 0x1d9 +#define KEY_FN_F9 0x1da +#define KEY_FN_F10 0x1db +#define KEY_FN_F11 0x1dc +#define KEY_FN_F12 0x1dd +#define KEY_FN_1 0x1de +#define KEY_FN_2 0x1df +#define KEY_FN_D 0x1e0 +#define KEY_FN_E 0x1e1 +#define KEY_FN_F 0x1e2 +#define KEY_FN_S 0x1e3 +#define KEY_FN_B 0x1e4 + +#define KEY_BRL_DOT1 0x1f1 +#define KEY_BRL_DOT2 0x1f2 +#define KEY_BRL_DOT3 0x1f3 +#define KEY_BRL_DOT4 0x1f4 +#define KEY_BRL_DOT5 0x1f5 +#define KEY_BRL_DOT6 0x1f6 +#define KEY_BRL_DOT7 0x1f7 +#define KEY_BRL_DOT8 0x1f8 +#define KEY_BRL_DOT9 0x1f9 +#define KEY_BRL_DOT10 0x1fa + +#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ +#define KEY_NUMERIC_1 0x201 /* and other keypads */ +#define KEY_NUMERIC_2 0x202 +#define KEY_NUMERIC_3 0x203 +#define KEY_NUMERIC_4 0x204 +#define KEY_NUMERIC_5 0x205 +#define KEY_NUMERIC_6 0x206 +#define KEY_NUMERIC_7 0x207 +#define KEY_NUMERIC_8 0x208 +#define KEY_NUMERIC_9 0x209 +#define KEY_NUMERIC_STAR 0x20a +#define KEY_NUMERIC_POUND 0x20b + +#define KEY_CAMERA_FOCUS 0x210 +#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ + +#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ +#define KEY_TOUCHPAD_ON 0x213 +#define KEY_TOUCHPAD_OFF 0x214 + +#define KEY_CAMERA_ZOOMIN 0x215 +#define KEY_CAMERA_ZOOMOUT 0x216 +#define KEY_CAMERA_UP 0x217 +#define KEY_CAMERA_DOWN 0x218 +#define KEY_CAMERA_LEFT 0x219 +#define KEY_CAMERA_RIGHT 0x21a + +#define KEY_ATTENDANT_ON 0x21b +#define KEY_ATTENDANT_OFF 0x21c +#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ +#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ + +#define BTN_DPAD_UP 0x220 +#define BTN_DPAD_DOWN 0x221 +#define BTN_DPAD_LEFT 0x222 +#define BTN_DPAD_RIGHT 0x223 + +#define MATRIX_KEY(row, col, code) \ + ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF)) + +#endif /* _DT_BINDINGS_INPUT_INPUT_H */ diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh index 3e3040b2e2..70f3a5df6f 100644 --- a/scripts/multiconfig.sh +++ b/scripts/multiconfig.sh @@ -162,6 +162,16 @@ do_defconfig () { fi } +do_board_felconfig () { + do_board_defconfig ${1%%_felconfig}_defconfig + if ! grep -q CONFIG_ARCH_SUNXI=y .config || ! grep -q CONFIG_SPL=y .config ; then + echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2 + exit 1 + fi + sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y/g' \ + .config spl/.config +} + do_savedefconfig () { if [ -r "$KCONFIG_CONFIG" ]; then subimages=$(get_enabled_subimages) @@ -323,6 +333,8 @@ target=$1 case $target in *_defconfig) do_board_defconfig $target;; +*_felconfig) + do_board_felconfig $target;; *_config) # backward compatibility do_board_defconfig ${target%_config}_defconfig;; |