diff options
-rw-r--r-- | cmd/trace.c | 4 | ||||
-rw-r--r-- | common/board_f.c | 6 | ||||
-rw-r--r-- | common/board_r.c | 14 | ||||
-rw-r--r-- | common/bootm.c | 2 | ||||
-rw-r--r-- | common/image-fit.c | 16 | ||||
-rw-r--r-- | configs/sandbox_defconfig | 11 | ||||
-rw-r--r-- | drivers/mtd/spi/sandbox.c | 14 | ||||
-rw-r--r-- | drivers/mtd/spi/sf_probe.c | 4 | ||||
-rw-r--r-- | drivers/mtd/spi/spi_flash.c | 2 | ||||
-rw-r--r-- | drivers/pci/pci_auto.c | 2 | ||||
-rw-r--r-- | drivers/timer/Kconfig | 10 | ||||
-rw-r--r-- | drivers/timer/sandbox_timer.c | 18 | ||||
-rw-r--r-- | drivers/timer/timer-uclass.c | 6 | ||||
-rw-r--r-- | include/image.h | 5 | ||||
-rw-r--r-- | include/timer.h | 21 | ||||
-rw-r--r-- | lib/div64.c | 3 | ||||
-rw-r--r-- | lib/time.c | 28 | ||||
-rw-r--r-- | test/dm/Makefile | 4 | ||||
-rwxr-xr-x | test/image/test-fit.py | 4 | ||||
-rwxr-xr-x | test/trace/test-trace.sh | 4 | ||||
-rw-r--r-- | test/vboot/sandbox-u-boot.dts | 3 |
21 files changed, 138 insertions, 43 deletions
diff --git a/cmd/trace.c b/cmd/trace.c index 1e62a1a199..1a6d8c3047 100644 --- a/cmd/trace.c +++ b/cmd/trace.c @@ -43,7 +43,7 @@ static int create_func_list(int argc, char * const argv[]) err = trace_list_functions(buff + buff_ptr, avail, &needed); if (err) printf("Error: truncated (%#x bytes needed)\n", needed); - used = min(avail, needed); + used = min(avail, (size_t)needed); printf("Function trace dumped to %08lx, size %#zx\n", (ulong)map_to_sysmem(buff + buff_ptr), used); setenv_hex("profbase", map_to_sysmem(buff)); @@ -67,7 +67,7 @@ static int create_call_list(int argc, char * const argv[]) err = trace_list_calls(buff + buff_ptr, avail, &needed); if (err) printf("Error: truncated (%#x bytes needed)\n", needed); - used = min(avail, needed); + used = min(avail, (size_t)needed); printf("Call list dumped to %08lx, size %#zx\n", (ulong)map_to_sysmem(buff + buff_ptr), used); diff --git a/common/board_f.c b/common/board_f.c index a960144b02..622093a391 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -45,6 +45,7 @@ #include <post.h> #include <spi.h> #include <status_led.h> +#include <timer.h> #include <trace.h> #include <video.h> #include <watchdog.h> @@ -805,6 +806,11 @@ static int initf_dm(void) if (ret) return ret; #endif +#ifdef CONFIG_TIMER_EARLY + ret = dm_timer_init(); + if (ret) + return ret; +#endif return 0; } diff --git a/common/board_r.c b/common/board_r.c index 6c23865279..52a9b262eb 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -46,6 +46,7 @@ #include <serial.h> #include <spi.h> #include <stdio_dev.h> +#include <timer.h> #include <trace.h> #include <watchdog.h> #ifdef CONFIG_CMD_AMBAPP @@ -312,13 +313,22 @@ static int initr_noncached(void) #ifdef CONFIG_DM static int initr_dm(void) { + int ret; + /* Save the pre-reloc driver model and start a new one */ gd->dm_root_f = gd->dm_root; gd->dm_root = NULL; -#ifdef CONFIG_TIMER + ret = dm_init_and_scan(false); + if (ret) + return ret; +#ifdef CONFIG_TIMER_EARLY gd->timer = NULL; + ret = dm_timer_init(); + if (ret) + return ret; #endif - return dm_init_and_scan(false); + + return 0; } #endif diff --git a/common/bootm.c b/common/bootm.c index 99d574db2c..df27089965 100644 --- a/common/bootm.c +++ b/common/bootm.c @@ -201,7 +201,7 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc, images.ep += images.os.load; } - images.os.start = (ulong)os_hdr; + images.os.start = map_to_sysmem(os_hdr); return 0; } diff --git a/common/image-fit.c b/common/image-fit.c index c531ee74d7..fbd9e0d770 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -851,6 +851,11 @@ static int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore) return 0; } +ulong fit_get_end(const void *fit) +{ + return map_to_sysmem((void *)(fit + fdt_totalsize(fit))); +} + /** * fit_set_timestamp - set node timestamp property * @fit: pointer to the FIT format image header @@ -1030,10 +1035,15 @@ int fit_image_verify(const void *fit, int image_noffset) strlen(FIT_SIG_NODENAME))) { ret = fit_image_check_sig(fit, noffset, data, size, -1, &err_msg); - if (ret) { + + /* + * Show an indication on failure, but do not return + * an error. Only keys marked 'required' can cause + * an image validation failure. See the call to + * fit_image_verify_required_sigs() above. + */ + if (ret) puts("- "); - goto error; - } else puts("+ "); } diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index b5b81caaae..02534bfea7 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -1,10 +1,13 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_PCI=y CONFIG_DEFAULT_DEVICE_TREE="sandbox" -CONFIG_DM_PCI_COMPAT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y +CONFIG_BOOTSTAGE=y +CONFIG_BOOTSTAGE_REPORT=y +CONFIG_CONSOLE_RECORD=y +CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set @@ -12,14 +15,10 @@ CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_GPIO=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_SOUND=y -CONFIG_BOOTSTAGE=y -CONFIG_BOOTSTAGE_REPORT=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_TPM=y CONFIG_CMD_TPM_TEST=y -CONFIG_CONSOLE_RECORD=y -CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000 CONFIG_OF_CONTROL=y CONFIG_OF_HOSTFILE=y CONFIG_REGMAP=y @@ -52,6 +51,7 @@ CONFIG_SPI_FLASH_SST=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_DM_ETH=y CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y CONFIG_PCI_SANDBOX=y CONFIG_PINCTRL=y CONFIG_PINCONF=y @@ -68,6 +68,7 @@ CONFIG_SOUND=y CONFIG_SOUND_SANDBOX=y CONFIG_SANDBOX_SPI=y CONFIG_TIMER=y +CONFIG_TIMER_EARLY=y CONFIG_SANDBOX_TIMER=y CONFIG_TPM_TIS_SANDBOX=y CONFIG_USB=y diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c index 895604d736..53470b90ce 100644 --- a/drivers/mtd/spi/sandbox.c +++ b/drivers/mtd/spi/sandbox.c @@ -142,13 +142,15 @@ static int sandbox_sf_probe(struct udevice *dev) if (bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS) spec = state->spi[bus->seq][cs].spec; if (!spec) { + debug("%s: No spec found for bus %d, cs %d\n", + __func__, bus->seq, cs); ret = -ENOENT; goto error; } file = strchr(spec, ':'); if (!file) { - printf("sandbox_sf: unable to parse file\n"); + printf("%s: unable to parse file\n", __func__); ret = -EINVAL; goto error; } @@ -174,7 +176,7 @@ static int sandbox_sf_probe(struct udevice *dev) break; } if (!data->name) { - printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len, + printf("%s: unknown flash '%*s'\n", __func__, (int)idname_len, spec); ret = -EINVAL; goto error; @@ -185,8 +187,7 @@ static int sandbox_sf_probe(struct udevice *dev) sbsf->fd = os_open(pdata->filename, 02); if (sbsf->fd == -1) { - free(sbsf); - printf("sandbox_sf: unable to open file '%s'\n", + printf("%s: unable to open file '%s'\n", __func__, pdata->filename); ret = -EIO; goto error; @@ -553,6 +554,9 @@ static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state, * yet. Perhaps we can figure something out. */ state->spi[bus][cs].spec = spec; + debug("%s: Setting up spec '%s' for bus %ld, cs %ld\n", __func__, + spec, bus, cs); + return 0; } SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>"); @@ -671,6 +675,8 @@ int dm_scan_other(bool pre_reloc_only) __func__, busnum, cs); return ret; } + debug("%s: Setting up spec '%s' for bus %d, cs %d\n", + __func__, spec, busnum, cs); } } } diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index daa1d5b249..7b296378d2 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -42,10 +42,8 @@ static int spi_flash_probe_slave(struct spi_flash *flash) } ret = spi_flash_scan(flash); - if (ret) { - ret = -EINVAL; + if (ret) goto err_read_id; - } #ifdef CONFIG_SPI_FLASH_MTD ret = spi_flash_mtd_register(flash); diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 3c365d5e9a..2ae2e3c8c9 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -989,7 +989,7 @@ int spi_flash_scan(struct spi_flash *flash) ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); if (ret) { printf("SF: Failed to get idcodes\n"); - return -EINVAL; + return ret; } #ifdef DEBUG diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 88bc416c61..ee9a854bda 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -30,7 +30,7 @@ void dm_pciauto_setup_device(struct udevice *dev, int bars_num, u8 header_type; int rom_addr; pci_addr_t bar_value; - struct pci_region *bar_res; + struct pci_region *bar_res = NULL; int found_mem64 = 0; u16 class; diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig index ff65a731de..cb18f12fc9 100644 --- a/drivers/timer/Kconfig +++ b/drivers/timer/Kconfig @@ -9,6 +9,16 @@ config TIMER will be used. The timer is usually a 32 bits free-running up counter. There may be no real tick, and no timer interrupt. +config TIMER_EARLY + bool "Allow timer to be used early in U-Boot" + depends on TIMER + help + In some cases the timer must be accessible before driver model is + active. Examples include when using CONFIG_TRACE to trace U-Boot's + execution before driver model is set up. Enable this option to + use an early timer. These functions must be supported by your timer + driver: timer_early_get_count() and timer_early_get_rate(). + config ALTERA_TIMER bool "Altera timer support" depends on TIMER diff --git a/drivers/timer/sandbox_timer.c b/drivers/timer/sandbox_timer.c index a8da936349..6a6411afeb 100644 --- a/drivers/timer/sandbox_timer.c +++ b/drivers/timer/sandbox_timer.c @@ -10,6 +10,8 @@ #include <timer.h> #include <os.h> +#define SANDBOX_TIMER_RATE 1000000 + /* system timer offset in ms */ static unsigned long sandbox_timer_offset; @@ -18,9 +20,19 @@ void sandbox_timer_add_offset(unsigned long offset) sandbox_timer_offset += offset; } -static int sandbox_timer_get_count(struct udevice *dev, u64 *count) +u64 notrace timer_early_get_count(void) +{ + return os_get_nsec() / 1000 + sandbox_timer_offset * 1000; +} + +unsigned long notrace timer_early_get_rate(void) +{ + return SANDBOX_TIMER_RATE; +} + +static notrace int sandbox_timer_get_count(struct udevice *dev, u64 *count) { - *count = os_get_nsec() / 1000 + sandbox_timer_offset * 1000; + *count = timer_early_get_count(); return 0; } @@ -30,7 +42,7 @@ static int sandbox_timer_probe(struct udevice *dev) struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); if (!uc_priv->clock_rate) - uc_priv->clock_rate = 1000000; + uc_priv->clock_rate = SANDBOX_TIMER_RATE; return 0; } diff --git a/drivers/timer/timer-uclass.c b/drivers/timer/timer-uclass.c index 83d1a35e06..382c0f2bd1 100644 --- a/drivers/timer/timer-uclass.c +++ b/drivers/timer/timer-uclass.c @@ -22,7 +22,7 @@ DECLARE_GLOBAL_DATA_PTR; * tick, and no timer interrupt. */ -int timer_get_count(struct udevice *dev, u64 *count) +int notrace timer_get_count(struct udevice *dev, u64 *count) { const struct timer_ops *ops = device_get_ops(dev); @@ -32,9 +32,9 @@ int timer_get_count(struct udevice *dev, u64 *count) return ops->get_count(dev, count); } -unsigned long timer_get_rate(struct udevice *dev) +unsigned long notrace timer_get_rate(struct udevice *dev) { - struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct timer_dev_priv *uc_priv = dev->uclass_priv; return uc_priv->clock_rate; } diff --git a/include/image.h b/include/image.h index 299d6d2a13..518a4f5291 100644 --- a/include/image.h +++ b/include/image.h @@ -818,10 +818,7 @@ static inline ulong fit_get_size(const void *fit) * returns: * end address of the FIT image (blob) in memory */ -static inline ulong fit_get_end(const void *fit) -{ - return (ulong)fit + fdt_totalsize(fit); -} +ulong fit_get_end(const void *fit); /** * fit_get_name - get FIT node name diff --git a/include/timer.h b/include/timer.h index f14725cc28..dcc803c392 100644 --- a/include/timer.h +++ b/include/timer.h @@ -67,4 +67,25 @@ struct timer_dev_priv { unsigned long clock_rate; }; +/** + * timer_early_get_count() - Implement timer_get_count() before driver model + * + * If CONFIG_TIMER_EARLY is enabled, this function wil be called to return + * the current timer value before the proper driver model timer is ready. + * It should be implemented by one of the timer values. This is mostly useful + * for tracing. + */ +u64 timer_early_get_count(void); + +/** + * timer_early_get_rate() - Get the timer rate before driver model + * + * If CONFIG_TIMER_EARLY is enabled, this function wil be called to return + * the current timer rate in Hz before the proper driver model timer is ready. + * It should be implemented by one of the timer values. This is mostly useful + * for tracing. This corresponds to the clock_rate value in struct + * timer_dev_priv. + */ +unsigned long timer_early_get_rate(void); + #endif /* _TIMER_H_ */ diff --git a/lib/div64.c b/lib/div64.c index 795ef0e1e4..319fca50fa 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -18,8 +18,9 @@ #include <div64.h> #include <linux/types.h> +#include <linux/compiler.h> -uint32_t __div64_32(uint64_t *n, uint32_t base) +uint32_t notrace __div64_32(uint64_t *n, uint32_t base) { uint64_t rem = *n; uint64_t b = base; diff --git a/lib/time.c b/lib/time.c index e9f6861b98..f37150fddc 100644 --- a/lib/time.c +++ b/lib/time.c @@ -43,11 +43,17 @@ extern unsigned long __weak timer_read_counter(void); #ifdef CONFIG_TIMER ulong notrace get_tbclk(void) { - int ret; + if (!gd->timer) { +#ifdef CONFIG_TIMER_EARLY + return timer_early_get_rate(); +#else + int ret; - ret = dm_timer_init(); - if (ret) - return ret; + ret = dm_timer_init(); + if (ret) + return ret; +#endif + } return timer_get_rate(gd->timer); } @@ -57,9 +63,17 @@ uint64_t notrace get_ticks(void) u64 count; int ret; - ret = dm_timer_init(); - if (ret) - return ret; + if (!gd->timer) { +#ifdef CONFIG_TIMER_EARLY + return timer_early_get_count(); +#else + int ret; + + ret = dm_timer_init(); + if (ret) + return ret; +#endif + } ret = timer_get_count(gd->timer, &count); if (ret) diff --git a/test/dm/Makefile b/test/dm/Makefile index d4f3f22e58..fd0198f1ba 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -27,8 +27,8 @@ obj-y += regmap.o obj-$(CONFIG_REMOTEPROC) += remoteproc.o obj-$(CONFIG_RESET) += reset.o obj-$(CONFIG_DM_RTC) += rtc.o -#obj-$(CONFIG_DM_SPI_FLASH) += sf.o -#obj-$(CONFIG_DM_SPI) += spi.o +obj-$(CONFIG_DM_SPI_FLASH) += sf.o +obj-$(CONFIG_DM_SPI) += spi.o obj-y += syscon.o obj-$(CONFIG_DM_USB) += usb.o obj-$(CONFIG_DM_PMIC) += pmic.o diff --git a/test/image/test-fit.py b/test/image/test-fit.py index d5143cbb0f..db0649fca8 100755 --- a/test/image/test-fit.py +++ b/test/image/test-fit.py @@ -108,6 +108,10 @@ base_fdt = ''' model = "Sandbox Verified Boot Test"; compatible = "sandbox"; + reset@0 { + compatible = "sandbox,reset"; + }; + }; ''' diff --git a/test/trace/test-trace.sh b/test/trace/test-trace.sh index 3e8651ed60..746793c83b 100755 --- a/test/trace/test-trace.sh +++ b/test/trace/test-trace.sh @@ -45,7 +45,9 @@ check_results() { # between calls 2 and 3, where tracing is paused. # This code gets the sign of the difference between each number and # its predecessor. - counts="$(tr -d , <${tmp} | awk '/traced function calls/ { diff = $1 - upto; upto = $1; printf "%d ", diff < 0 ? -1 : (diff > 0 ? 1 : 0)}')" + counts="$(tr -d ',\r' <${tmp} | awk \ + '/traced function calls/ { diff = $1 - upto; upto = $1; \ + printf "%d ", diff < 0 ? -1 : (diff > 0 ? 1 : 0)}')" if [ "${counts}" != "1 1 0 1 " ]; then fail "trace collection error: ${counts}" diff --git a/test/vboot/sandbox-u-boot.dts b/test/vboot/sandbox-u-boot.dts index a1e853c9ca..63f8f401de 100644 --- a/test/vboot/sandbox-u-boot.dts +++ b/test/vboot/sandbox-u-boot.dts @@ -4,4 +4,7 @@ model = "Sandbox Verified Boot Test"; compatible = "sandbox"; + reset@0 { + compatible = "sandbox,reset"; + }; }; |