diff options
146 files changed, 1113 insertions, 3341 deletions
@@ -1067,7 +1067,6 @@ mx31pdk_nand_config : unconfig echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ else \ echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ - echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ fi @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 @@ -2836,19 +2836,17 @@ Low Level (hardware related) configuration options: globally (CONFIG_CMD_MEM). - CONFIG_SKIP_LOWLEVEL_INIT -- CONFIG_SKIP_RELOCATE_UBOOT + [ARM only] If this variable is defined, then certain + low level initializations (like setting up the memory + controller) are omitted and/or U-Boot does not + relocate itself into RAM. - [ARM only] If these variables are defined, then - certain low level initializations (like setting up - the memory controller) are omitted and/or U-Boot does - not relocate itself into RAM. - Normally these variables MUST NOT be defined. The - only exception is when U-Boot is loaded (to RAM) by - some other boot loader or by a debugger which - performs these initializations itself. + Normally this variable MUST NOT be defined. The only + exception is when U-Boot is loaded (to RAM) by some + other boot loader or by a debugger which performs + these initializations itself. - CONFIG_PRELOADER - Modifies the behaviour of start.S when compiling a loader that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 21c1e33e67..4e165bfda4 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -33,9 +33,6 @@ STANDALONE_LOAD_ADDR = 0xc100000 endif endif -ifdef CONFIG_SYS_ARM_WITHOUT_RELOC -PLATFORM_CPPFLAGS += -DCONFIG_SYS_ARM_WITHOUT_RELOC -endif PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: @@ -68,9 +65,7 @@ endif endif LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds -ifndef CONFIG_SYS_ARM_WITHOUT_RELOC # needed for relocation ifndef CONFIG_NAND_SPL PLATFORM_LDFLAGS += -pie endif -endif diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index d70ca1d515..aecc943c8e 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -132,14 +132,11 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: .word 0x0badc0de -#endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* * the actual reset code */ @@ -218,7 +215,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -265,7 +261,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -298,9 +293,7 @@ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -318,112 +311,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#ifdef CONFIG_OMAP2420H4 - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - bl cpy_clk_code /* put dpll adjust code behind vectors */ -#endif - /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ -#ifndef CONFIG_PRELOADER - beq stack_setup -#endif /* CONFIG_PRELOADER */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -#ifdef CONFIG_PRELOADER - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#else - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ -#endif /* CONFIG_PRELOADER */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - adr r2, _start - ldr r0, _bss_start_ofs /* find start of bss segment */ - add r0, r0, r2 - ldr r1, _bss_end_ofs /* stop here */ - add r1, r1, r2 - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l -#endif - - ldr r0, _start_armboot_ofs - adr r1, _start - add r0, r0, r1 - ldr pc, r0 - -_start_armboot_ofs: -#ifdef CONFIG_NAND_SPL - .word nand_boot - _start -#else -#ifdef CONFIG_ONENAND_IPL - .word start_oneboot - _start -#else - .word start_armboot - _start -#endif /* CONFIG_ONENAND_IPL */ -#endif /* CONFIG_NAND_SPL */ - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -508,13 +395,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack -#else - adr r2, _start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -545,13 +426,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) -#else - adr r13, _start @ setup our mode stack (enter in banked mode) - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr @@ -567,13 +442,7 @@ cpu_init_crit: .macro get_bad_stack_swi sub r13, r13, #4 @ space on current stack for scratch reg. str r0, [r13] @ save R0's value. -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r0, IRQ_STACK_START_IN @ get data regions start -#else - ldr r0, _armboot_start @ get data regions start - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(GENERATED_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack -#endif str lr, [r0] @ save caller lr in position 0 of saved stack mrs r0, spsr @ get the spsr str lr, [r0, #4] @ save spsr in position 1 of saved stack diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 7f32db7874..f04d268881 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -108,12 +108,6 @@ _TEXT_BASE: _TEXT_PHY_BASE: .word CONFIG_SYS_PHY_UBOOT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. * Subtracting _start from them lets the linker put their @@ -157,7 +151,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -288,7 +281,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -335,7 +327,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ #ifdef CONFIG_ENABLE_MMU enable_mmu: @@ -406,9 +397,7 @@ _nand_boot: .word nand_boot ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -419,188 +408,6 @@ _board_init_r_ofs: .word board_init_r - _start #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x3f - orr r0, r0, #0xd3 - msr cpsr, r0 - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -cpu_init_crit: - /* - * When booting from NAND - it has definitely been a reset, so, no need - * to flush caches and disable the MMU - */ -#ifndef CONFIG_NAND_SPL - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) - bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) - orr r0, r0, #0x00000002 @ set bit 2 (A) Align - orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache - - /* Prepare to disable the MMU */ - adr r2, mmu_disable_phys - sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE) - b mmu_disable - - .align 5 - /* Run in a single cache-line */ -mmu_disable: - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -mmu_disable_phys: - -#ifdef CONFIG_DISABLE_TCM - /* - * Disable the TCMs - */ - mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ - cmp r0, #0 - beq skip_tcmdisable - mov r1, #0 - mov r2, #1 - tst r0, r2 - mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ - tst r0, r2, LSL #16 - mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ -skip_tcmdisable: -#endif -#endif - -#ifdef CONFIG_PERIPORT_REMAP - /* Peri port setup */ - ldr r0, =CONFIG_PERIPORT_BASE - orr r0, r0, #CONFIG_PERIPORT_SIZE - mcr p15,0,r0,c15,c2,4 -#endif - - /* - * Go setup Memory and board specific bits prior to relocation. - */ - bl lowlevel_init /* go setup pll,mux,memory */ - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - -#ifdef CONFIG_ENABLE_MMU -enable_mmu: - /* enable domain access */ - ldr r5, =0x0000ffff - mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ - - /* Set the TTB register */ - ldr r0, _mmu_table_base - ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE - ldr r2, =0xfff00000 - bic r0, r0, r2 - orr r1, r0, r1 - mcr p15, 0, r1, c2, c0, 0 - - /* Enable the MMU */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #1 /* Set CR_M to enable MMU */ - - /* Prepare to enable the MMU */ - adr r1, skip_hw_init - and r1, r1, #0x3fc - ldr r2, _TEXT_BASE - ldr r3, =0xfff00000 - and r2, r2, r3 - orr r2, r2, r1 - b mmu_enable - - .align 5 - /* Run in a single cache-line */ -mmu_enable: - - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -skip_hw_init: -#endif - - /* Set up the stack */ -stack_setup: - ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0 /* clear */ - -clbss_l: - str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - -#ifndef CONFIG_NAND_SPL - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot -#else - b nand_boot -/* .word nand_boot*/ -#endif - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - #ifdef CONFIG_ENABLE_MMU _mmu_table_base: .word mmu_table @@ -687,14 +494,7 @@ phy_last_jump: /* Save user registers (now in svc mode) r0-r12 */ stmia sp, {r0 - r12} -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - /* set base 2 words into abort stack */ - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) -#else ldr r2, IRQ_STACK_START_IN -#endif /* get values for "aborted" pc and cpsr (into parm regs) */ ldmia r2, {r2 - r3} /* grab pointer to old stack */ @@ -709,16 +509,7 @@ phy_last_jump: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - /* setup our mode stack (enter in banked mode) */ - ldr r13, _armboot_start - /* move past malloc pool */ - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) - /* move to reserved a couple spots for abort stack */ - sub r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif /* save caller lr in position 0 of saved stack */ str lr, [r13] @@ -743,16 +534,7 @@ phy_last_jump: sub r13, r13, #4 /* save R0's value. */ str r0, [r13] -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - /* get data regions start */ - ldr r0, _armboot_start - /* move past malloc pool */ - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) - /* move past gbl and a couple spots for abort stack */ - sub r0, r0, #(GENERATED_GBL_DATA_SIZE + 8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif /* save caller lr in position 0 of saved stack */ str lr, [r0] /* get the spsr */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 41c1519efe..8cd267b352 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -79,12 +79,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -108,7 +102,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -197,7 +190,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -224,7 +216,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -264,92 +255,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifdef CONFIG_LPC2292 - bl lowlevel_init -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - -#if CONFIG_SYS_TEXT_BASE -#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */ - ldr r2, =0x0 /* Relocate the exception vectors */ - cmp r1, r2 /* and associated data to address */ - ldmneia r0!, {r3-r10} /* 0x0. Do nothing if CONFIG_SYS_TEXT_BASE is */ - stmneia r2!, {r3-r10} /* 0x0. Copy the first 15 words. */ - ldmneia r0, {r3-r9} - stmneia r2, {r3-r9} - adrne r0, _start /* restore r0 */ -#endif /* !CONFIG_LPC2292 */ -#endif - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -606,13 +511,7 @@ lock_loop: stmia sp, {r0 - r12} @ Calling r0-r12 add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -643,13 +542,7 @@ lock_loop: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c b/arch/arm/cpu/arm920t/s3c24x0/speed.c index b13283a798..3ae558dd62 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/speed.c +++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c @@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg) ulong r, m, p, s; if (pllreg == MPLL) - r = readl(&clk_power->MPLLCON); + r = readl(&clk_power->mpllcon); else if (pllreg == UPLL) - r = readl(&clk_power->UPLLCON); + r = readl(&clk_power->upllcon); else hang(); @@ -64,7 +64,12 @@ static ulong get_PLLCLK(int pllreg) p = ((r & 0x003F0) >> 4) + 2; s = r & 0x3; +#if defined(CONFIG_S3C2440) + if (pllreg == MPLL) + return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s)); +#endif return (CONFIG_SYS_CLK_FREQ * m) / (p << s); + } /* return FCLK frequency */ @@ -77,8 +82,23 @@ ulong get_FCLK(void) ulong get_HCLK(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - - return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK(); +#ifdef CONFIG_S3C2440 + switch (readl(&clk_power->clkdivn) & 0x6) { + default: + case 0: + return get_FCLK(); + case 2: + return get_FCLK() / 2; + case 4: + return (readl(&clk_power->camdivn) & (1 << 9)) ? + get_FCLK() / 8 : get_FCLK() / 4; + case 6: + return (readl(&clk_power->camdivn) & (1 << 8)) ? + get_FCLK() / 6 : get_FCLK() / 3; + } +#else + return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK(); +#endif } /* return PCLK frequency */ @@ -86,7 +106,7 @@ ulong get_PCLK(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK(); + return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK(); } /* return UCLK frequency */ diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c index 7d47354381..8cf9ff6be0 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c @@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void) { struct s3c24x0_timers *timers = s3c24x0_get_base_timers(); - return readl(&timers->TCNTO4) & 0xffff; + return readl(&timers->tcnto4) & 0xffff; } static ulong timestamp; @@ -56,7 +56,7 @@ int timer_init(void) /* use PWM Timer 4 because it has no output */ /* prescaler for Timer 4 is 16 */ - writel(0x0f00, &timers->TCFG0); + writel(0x0f00, &timers->tcfg0); if (timer_load_val == 0) { /* * for 10 ms clock period @ PCLK with 4 bit divider = 1/2 @@ -68,13 +68,13 @@ int timer_init(void) } /* load value for 10 ms timeout */ lastdec = timer_load_val; - writel(timer_load_val, &timers->TCNTB4); - /* auto load, manual update of Timer 4 */ - tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000; - writel(tmr, &timers->TCON); - /* auto load, start Timer 4 */ + writel(timer_load_val, &timers->tcntb4); + /* auto load, manual update of timer 4 */ + tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000; + writel(tmr, &timers->tcon); + /* auto load, start timer 4 */ tmr = (tmr & ~0x0700000) | 0x0500000; - writel(tmr, &timers->TCON); + writel(tmr, &timers->tcon); timestamp = 0; return (0); @@ -181,6 +181,7 @@ ulong get_tbclk(void) tbclk = timer_load_val * 100; #elif defined(CONFIG_SBC2410X) || \ defined(CONFIG_SMDK2410) || \ + defined(CONFIG_S3C2440) || \ defined(CONFIG_VCMA9) tbclk = CONFIG_SYS_HZ; #else @@ -206,13 +207,13 @@ void reset_cpu(ulong ignored) watchdog = s3c24x0_get_base_watchdog(); /* Disable watchdog */ - writel(0x0000, &watchdog->WTCON); + writel(0x0000, &watchdog->wtcon); /* Initialize watchdog timer count register */ - writel(0x0001, &watchdog->WTCNT); + writel(0x0001, &watchdog->wtcnt); /* Enable watchdog timer; assert reset at timer timeout */ - writel(0x0021, &watchdog->WTCON); + writel(0x0021, &watchdog->wtcon); while (1) /* loop forever and wait for reset to happen */; diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c index e468ed08fc..226a3f6c90 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb.c +++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c @@ -39,14 +39,14 @@ int usb_cpu_init(void) * Set the 48 MHz UPLL clocking. Values are taken from * "PLL value selection guide", 6-23, s3c2400_UM.pdf. */ - writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON); + writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon); /* 1 = use pads related USB for USB host */ - writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR); + writel(readl(&gpio->misccr) | 0x8, &gpio->misccr); /* * Enable USB host clock. */ - writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); return 0; } @@ -55,14 +55,14 @@ int usb_cpu_stop(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); /* may not want to do this */ - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); return 0; } int usb_cpu_init_fail(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); return 0; } diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c index 5aa8d64a55..ccc97384f3 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c @@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void) * Set the 48 MHz UPLL clocking. Values are taken from * "PLL value selection guide", 6-23, s3c2400_UM.pdf. */ - clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2); - gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */ + clk_power->upllcon = ((40 << 12) + (1 << 4) + 2); + gpio->misccr |= 0x8; /* 1 = use pads related USB for USB host */ /* * Enable USB host clock. */ - clk_power->CLKCON |= (1 << 4); + clk_power->clkcon |= (1 << 4); memset(&gohci, 0, sizeof(struct ohci)); memset(&urb_priv, 0, sizeof(struct urb_priv)); @@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void) if (hc_reset(&gohci) < 0) { hc_release_ohci(&gohci); /* Initialization failed */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return -1; } @@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void) err("can't start usb-%s", gohci.slot_name); hc_release_ohci(&gohci); /* Initialization failed */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return -1; } #ifdef DEBUG @@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void) /* call hc_release_ohci() here ? */ hc_reset(&gohci); /* may not want to do this */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return 0; } diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index f0274b1f82..d4edde797b 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -75,12 +75,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -104,7 +98,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -243,7 +236,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -270,7 +262,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -316,127 +307,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual start code - */ - -start_code: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x1f - orr r0, r0, #0xd3 - msr cpsr, r0 - - bl coloured_LED_init - bl red_LED_on - -#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) - /* - * relocate exception table - */ - ldr r0, =_start - ldr r1, =0x0 - mov r2, #16 -copyex: - subs r2, r2, #1 - ldr r3, [r0], #4 - str r3, [r1], #4 - bne copyex -#endif - -#ifdef CONFIG_S3C24X0 - /* turn off the watchdog */ - -# if defined(CONFIG_S3C2400) -# define pWTCON 0x15300000 -# define INTMSK 0x14400008 /* Interupt-Controller base addresses */ -# define CLKDIVN 0x14800014 /* clock divisor register */ -#else -# define pWTCON 0x53000000 -# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -# define INTSUBMSK 0x4A00001C -# define CLKDIVN 0x4C000014 /* clock divisor register */ -# endif - - ldr r0, =pWTCON - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =INTMSK - str r1, [r0] -# if defined(CONFIG_S3C2410) - ldr r1, =0x3ff - ldr r0, =INTSUBMSK - str r1, [r0] -# endif - - /* FCLK:HCLK:PCLK = 1:2:4 */ - /* default FCLK is 120 MHz ! */ - ldr r0, =CLKDIVN - mov r1, #3 - str r1, [r0] -#endif /* CONFIG_S3C24X0 */ - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -525,15 +395,7 @@ cpu_init_crit: .macro bad_save_user_regs sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE) - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - /* set base 2 words into abort stack */ - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get pc, cpsr add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -565,15 +427,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE) - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) - /* reserve a couple spots in abort stack */ - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 2ad2df847e..51229c6154 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -85,12 +85,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -114,7 +108,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -234,7 +227,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -261,7 +253,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -305,108 +296,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * Set up 925T mode - */ - mov r1, #0x81 /* Set ARM925T configuration. */ - mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */ - - /* - * turn off the watchdog, unlock/diable sequence - */ - mov r1, #0xF5 - ldr r0, =WDTIM_MODE - strh r1, [r0] - mov r1, #0xA0 - strh r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =REG_IHL1_MIR - str r1, [r0] - ldr r0, =REG_IHL2_MIR - str r1, [r0] - - /* - * wait for dpll to lock - */ - ldr r0, =CK_DPLL1 - mov r1, #0x10 - strh r1, [r0] -poll1: - ldrh r1, [r0] - ands r1, r1, #0x01 - beq poll1 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -489,13 +378,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -526,13 +409,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c index c5c8ab7e4d..b749282099 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c +++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c @@ -49,20 +49,6 @@ u32 orion5x_sdram_bar(enum memory_bank bank) result = winregs[bank].base; return result; } -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = orion5x_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size( - (volatile long *) (gd->bd->bi_dram[i].start), - CONFIG_MAX_RAM_BANK_SIZE); - } - return 0; -} -#else int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -83,4 +69,3 @@ void dram_init_banksize (void) CONFIG_MAX_RAM_BANK_SIZE); } } -#endif diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 7397882b59..6dcc9b4d67 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -145,7 +145,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -205,7 +204,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -252,7 +250,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -287,9 +284,7 @@ _nand_boot_ofs: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -307,89 +302,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - ldr r3, _bss_start_ofs /* r3 <- _bss_start - _start */ - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#ifndef CONFIG_PRELOADER - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif -#endif /* CONFIG_PRELOADER */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - adr r2, _start - ldr r0, _bss_start_ofs /* find start of bss segment */ - add r0, r0, r2 - ldr r1, _bss_end_ofs /* stop here */ - add r1, r1, r2 - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - bl coloured_LED_init - bl red_LED_on -#endif /* CONFIG_PRELOADER */ - - ldr r0, _start_armboot_ofs - adr r1, _start - add r0, r0, r1 - ldr pc, r0 - -_start_armboot_ofs: -#ifdef CONFIG_NAND_SPL - .word nand_boot - _start -#else - .word start_armboot - _start -#endif /* CONFIG_NAND_SPL */ -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -474,13 +386,7 @@ cpu_init_crit: @ carve out a frame on current user stack sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - adr r2, _start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -512,13 +418,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - adr r13, _start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 22af2fae95..cad43ba048 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -89,12 +89,6 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -118,7 +112,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -203,7 +196,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -230,7 +222,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -273,72 +264,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l - - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -424,13 +349,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -462,13 +381,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index a420f44ff5..957ca34766 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -87,12 +87,6 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -116,7 +110,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -201,7 +194,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -228,7 +220,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -268,74 +259,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ -.globl reset -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* pc relative address of label */ - ldr r1, _TEXT_BASE /* linked image address of label */ - cmp r0, r1 /* test if we run from flash or RAM */ - beq stack_setup /* ifeq we are in the RAM copy */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -400,13 +323,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -438,13 +355,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index da2cd90013..0870857ede 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -136,29 +136,6 @@ void do_emif4_init(void) * dram_init - * - Sets uboots idea of sdram size */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} -#else int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -190,7 +167,6 @@ void dram_init_banksize (void) gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; } -#endif /* * mem_init() - diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 6c419f5b93..c75aa1d11c 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -163,33 +163,6 @@ void do_sdrc_init(u32 cs, u32 early) * dram_init - * - Sets uboots idea of sdram size */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { - do_sdrc_init(CS1, NOT_EARLY); - make_cs1_contiguous(); - - size1 = get_sdr_cs_size(CS1); - } - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} -#else int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -225,7 +198,6 @@ void dram_init_banksize (void) gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; } -#endif /* * mem_init - diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c index 24a66f5b94..e7651d2dd5 100644 --- a/arch/arm/cpu/armv7/omap4/board.c +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -102,12 +102,7 @@ int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - gd->bd->bi_dram[0].start = 0x80000000; - gd->bd->bi_dram[0].size = sdram_size(); -#else gd->ram_size = sdram_size(); -#endif return 0; } diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index bdf2fad380..bb3948d401 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -70,12 +70,6 @@ _end_vect: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -99,7 +93,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -196,7 +189,6 @@ relocate_code: stack_setup: mov sp, r4 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT adr r0, _start ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs @@ -266,7 +258,6 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 bne clbss_l #endif /* #ifndef CONFIG_PRELOADER */ -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ /* * We are done. Do not return, instead branch to second part of board @@ -276,9 +267,7 @@ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -295,94 +284,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x1f - orr r0, r0, #0xd3 - msr cpsr,r0 - -#if (CONFIG_OMAP34XX) - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start @ r0 <- current position of code - add r0, r0, #4 @ skip reset vector - mov r2, #64 @ r2 <- size to copy - add r2, r0, r2 @ r2 <- source end address - mov r1, #SRAM_OFFSET0 @ build vect addr - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3 - r10} @ copy from source address [r0] - stmia r1!, {r3 - r10} @ copy to target address [r1] - cmp r0, r2 @ until source end address [r2] - bne next @ loop until equal */ -#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) - /* No need to copy/exec the clock code - DPLL adjust already done - * in NAND/oneNAND Boot. - */ - bl cpy_clk_code @ put dpll adjust code behind vectors -#endif /* NAND Boot */ -#endif - /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: @ relocate U-Boot to RAM - adr r0, _start @ r0 <- current position of code - ldr r1, _TEXT_BASE @ test if we run from flash or RAM - cmp r0, r1 @ don't reloc during debug - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 @ r2 <- size of armboot - add r2, r0, r2 @ r2 <- source end address - -copy_loop: @ copy 32 bytes at a time - ldmia r0!, {r3 - r10} @ copy from source address [r0] - stmia r1!, {r3 - r10} @ copy to target address [r1] - cmp r0, r2 @ until source end address [r2] - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot - sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area - sub r0, r0, #GENERATED_GBL_DATA_SIZE @ bdinfo -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 @ leave 3 words for abort-stack - bic sp, sp, #7 @ 8-byte alignment for ABI compliance - - /* Clear BSS (if any). Is below tx (watch load addr - need space) */ -clear_bss: - ldr r0, _bss_start @ find start of bss segment - ldr r1, _bss_end @ stop here - mov r2, #0x00000000 @ clear value -clbss_l: - str r2, [r0] @ clear BSS location - cmp r0, r1 @ are we at the end yet - add r0, r0, #4 @ increment clear index pointer - bne clbss_l @ keep clearing till at end - - ldr pc, _start_armboot @ jump to C code - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /************************************************************************* * * CPU_init_critical registers @@ -464,14 +365,8 @@ cpu_init_crit: @ user stack stmia sp, {r0 - r12} @ Save user registers (now in @ svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE + 8) @ set base 2 words into abort -#else ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort @ stack -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc @ and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -507,14 +402,8 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack (enter - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) @ move to reserved a couple -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter @ in banked mode) -#endif str lr, [r13] @ save caller lr in position 0 @ of saved stack @@ -535,14 +424,8 @@ cpu_init_crit: sub r13, r13, #4 @ space on current stack for @ scratch reg. str r0, [r13] @ save R0's value. -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r0, _armboot_start @ get data regions start - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(GENERATED_GBL_DATA_SIZE + 8) @ move past gbl and a couple -#else ldr r0, IRQ_STACK_START_IN @ get data regions start @ spots for abort stack -#endif str lr, [r0] @ save caller lr in position 0 @ of saved stack mrs r0, spsr @ get the spsr diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index a2560d4c2a..8d1aebc719 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -98,12 +98,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -127,7 +121,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -327,7 +320,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -354,7 +346,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -394,190 +385,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/****************************************************************************/ -/* */ -/* the actual reset code */ -/* */ -/****************************************************************************/ - -reset: - /* disable mmu, set big-endian */ - mov r0, #0xf8 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* disable write buffer coalescing */ - mrc p15, 0, r0, c1, c0, 1 - orr r0, r0, #1 - mcr p15, 0, r0, c1, c0, 1 - CPWAIT r0 - - /* set EXP CS0 to the optimum timing */ - ldr r1, =CONFIG_SYS_EXP_CS0 - ldr r2, =IXP425_EXP_CS0 - str r1, [r2] - - /* make sure flash is visible at 0 */ -#if 0 - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - orr r1, r1, #0x80000000 - str r1, [r2] -#endif - mov r1, #CONFIG_SYS_SDR_CONFIG - ldr r2, =IXP425_SDR_CONFIG - str r1, [r2] - - /* disable refresh cycles */ - mov r1, #0 - ldr r3, =IXP425_SDR_REFRESH - str r1, [r3] - - /* send nop command */ - mov r1, #3 - ldr r4, =IXP425_SDR_IR - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* set SDRAM internal refresh val */ - ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT - str r1, [r3] - DELAY_FOR 0x4000, r0 - - /* send precharge-all command to close all open banks */ - mov r1, #2 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* provide 8 auto-refresh cycles */ - mov r1, #4 - mov r5, #8 -111: str r1, [r4] - DELAY_FOR 0x100, r0 - subs r5, r5, #1 - bne 111b - - /* set mode register in sdram */ - mov r1, #CONFIG_SYS_SDR_MODE_CONFIG - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* send normal operation command */ - mov r1, #6 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* copy */ - mov r0, #0 - mov r4, r0 - add r2, r0, #CONFIG_SYS_MONITOR_LEN - mov r1, #0x10000000 - mov r5, r1 - - 30: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r0, r2 - bne 30b - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* move flash to 0x50000000 */ - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - bic r1, r1, #0x80000000 - str r1, [r2] - - nop - nop - nop - nop - nop - nop - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* enable I cache */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #MMU_Control_I - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - mrs r0,cpsr /* set the cpu to SVC32 mode */ - bic r0,r0,#0x1f /* (superviser mode, M=10011) */ - orr r0,r0,#0x13 - msr cpsr,r0 - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /****************************************************************************/ /* */ @@ -618,13 +425,7 @@ _start_armboot: .word start_armboot stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -659,13 +460,7 @@ _start_armboot: .word start_armboot .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 239ad47a4f..fd8a40b8aa 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -75,12 +75,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -104,7 +98,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -214,7 +207,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -241,7 +233,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -278,100 +269,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#define pWDTCTL 0x80001400 /* Watchdog Timer control register */ -#define pINTENC 0x8000050C /* Interupt-Controller enable clear register */ -#define pCLKSET 0x80000420 /* clock divisor register */ - - /* disable watchdog, set watchdog control register to - * all zeros (default reset) - */ - ldr r0, =pWDTCTL - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTENC register (default) - */ - mov r1, #0xffffffff - ldr r0, =pINTENC - str r1, [r0] - - /* FCLK:HCLK:PCLK = 1:2:2 */ - /* default FCLK is 200 MHz, using 14.7456 MHz fin */ - ldr r0, =pCLKSET - ldr r1, =0x0004ee39 -@ ldr r1, =0x0005ee39 @ 1: 2: 4 - str r1, [r0] - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - @add r0, r0, #4 /* start at first byte of bss */ - /* why inc. 4 bytes past then? */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -460,13 +357,7 @@ cpu_init_crit: .macro bad_save_user_regs sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get pc, cpsr add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -497,13 +388,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index bf8510eb76..ae358a56e6 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -33,7 +33,6 @@ #include <config.h> #include <version.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/macro.h> /* takes care the CP15 update has taken place */ .macro CPWAIT reg @@ -251,7 +250,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT stmfd sp!, {r0-r12} copy_loop: ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ @@ -299,8 +297,7 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop -#endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ +#endif /* #ifndef CONFIG_PRELOADER */ clear_bss: #ifndef CONFIG_PRELOADER @@ -316,7 +313,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 bne clbss_l -#endif +#endif /* #ifndef CONFIG_PRELOADER */ /* * We are done. Do not return, instead branch to second part of board @@ -332,9 +329,7 @@ _start_oneboot_ofs ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ @@ -343,7 +338,7 @@ _start_oneboot_ofs _board_init_r_ofs: .word board_init_r - _start -#endif +#endif /* CONFIG_ONENAND_IPL */ _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -352,7 +347,7 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ +#else /* CONFIG_PRELOADER */ /****************************************************************************/ /* */ @@ -377,7 +372,7 @@ reset: /* Start OneNAND IPL */ ldr pc, =start_oneboot -#endif /* #if !defined(CONFIG_ONENAND_IPL) */ +#endif /* CONFIG_PRELOADER */ #ifndef CONFIG_PRELOADER /****************************************************************************/ @@ -419,13 +414,7 @@ reset: stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -460,13 +449,7 @@ reset: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr @@ -485,7 +468,7 @@ reset: .macro get_fiq_stack @ setup FIQ stack ldr sp, FIQ_STACK_START .endm -#endif /* CONFIG_PRELOADER */ +#endif /* CONFIG_PRELOADER /****************************************************************************/ @@ -499,7 +482,7 @@ reset: do_hang: ldr sp, _TEXT_BASE /* use 32 words abort stack */ bl hang /* hang and never return */ -#else /* !CONFIG_PRELOADER */ +#else .align 5 undefined_instruction: get_bad_stack @@ -618,4 +601,4 @@ mmu_table: .word (__base << 20) | 0xc12 .set __base, __base + 1 .endr -#endif +#endif /* CONFIG_PRELOADER */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index c58da98798..67b2c6a695 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -66,12 +66,6 @@ _start: b reset _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -95,7 +89,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -186,7 +179,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -225,7 +217,6 @@ vector_copy_loop: stmia r1!, {r3-r10} cmp r0, r2 blo vector_copy_loop -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -265,84 +256,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - bl lowlevel_init -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -/* - now copy to sram the interrupt vector -*/ - adr r0, real_vectors - add r2, r0, #1024 - ldr r1, =0x0c000000 - add r1, r1, #0x08 -vector_copy_loop: - ldmia r0!, {r3-r10} - stmia r1!, {r3-r10} - cmp r0, r2 - blo vector_copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index e6afe0f86f..ace0c074df 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -76,12 +76,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -105,7 +99,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -190,7 +183,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -217,7 +209,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -254,75 +245,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -441,13 +363,7 @@ cpu_init_crit: stmia sp, {r0 - r12} @ Calling r0-r12 add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -478,13 +394,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h deleted file mode 100644 index 85958dd32d..0000000000 --- a/arch/arm/include/asm/arch-pxa/macro.h +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/include/asm/arch-pxa/macro.h - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PXA_MACRO_H__ -#define __ASM_ARCH_PXA_MACRO_H__ -#ifdef __ASSEMBLY__ - -#include <asm/macro.h> -#include <asm/arch/pxa-regs.h> - -/* - * This macro performs a 32bit write to a memory location and makes sure the - * write operation really happened by performing a read back. - * - * Clobbered regs: r4, r5 - */ -.macro write32rb addr, data - ldr r4, =\addr - ldr r5, =\data - str r5, [r4] - ldr r5, [r4] -.endm - -/* - * This macro waits according to OSCR incrementation - * - * Clobbered regs: r4, r5, r6 - */ -.macro pxa_wait_ticks ticks - ldr r4, =OSCR - mov r5, #0 - str r5, [r4] - ldr r5, =\ticks -1: - ldr r6, [r4] - cmp r5, r6 - bgt 1b -.endm - -/* - * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_gpio_setup - write32 GPSR0, CONFIG_SYS_GPSR0_VAL - write32 GPSR1, CONFIG_SYS_GPSR1_VAL - write32 GPSR2, CONFIG_SYS_GPSR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPSR3, CONFIG_SYS_GPSR3_VAL -#endif - - write32 GPCR0, CONFIG_SYS_GPCR0_VAL - write32 GPCR1, CONFIG_SYS_GPCR1_VAL - write32 GPCR2, CONFIG_SYS_GPCR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPCR3, CONFIG_SYS_GPCR3_VAL -#endif - - write32 GPDR0, CONFIG_SYS_GPDR0_VAL - write32 GPDR1, CONFIG_SYS_GPDR1_VAL - write32 GPDR2, CONFIG_SYS_GPDR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPDR3, CONFIG_SYS_GPDR3_VAL -#endif - - write32 GAFR0_L, CONFIG_SYS_GAFR0_L_VAL - write32 GAFR0_U, CONFIG_SYS_GAFR0_U_VAL - write32 GAFR1_L, CONFIG_SYS_GAFR1_L_VAL - write32 GAFR1_U, CONFIG_SYS_GAFR1_U_VAL - write32 GAFR2_L, CONFIG_SYS_GAFR2_L_VAL - write32 GAFR2_U, CONFIG_SYS_GAFR2_U_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GAFR3_L, CONFIG_SYS_GAFR3_L_VAL - write32 GAFR3_U, CONFIG_SYS_GAFR3_U_VAL -#endif - - write32 PSSR, CONFIG_SYS_PSSR_VAL -.endm - -/* - * This macro sets up the Memory controller of the PXA2xx CPU - * - * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE - * and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not - * use this regs for other purpose inside this macro. - * - * Clobbered regs: r3, r4, r5, r6, r7 - */ -.macro pxa_mem_setup - /* This comes handy when setting MDREFR */ - ldr r3, =MEMC_BASE - - /* - * 1) Initialize Asynchronous static memory controller - */ - - /* MSC0: nCS(0,1) */ - write32rb (MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL - /* MSC1: nCS(2,3) */ - write32rb (MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL - /* MSC2: nCS(4,5) */ - write32rb (MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL - - /* - * 2) Initialize Card Interface - */ - - /* MECR: Memory Expansion Card Register */ - write32rb (MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL - /* MCMEM0: Card Interface slot 0 timing */ - write32rb (MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL - /* MCMEM1: Card Interface slot 1 timing */ - write32rb (MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL - - /* - * 3) Configure Fly-By DMA register - */ - - write32rb (MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL - - /* - * 4) Initialize Timing for Sync Memory (SDCLK0) - */ - - /* - * Before accessing MDREFR we need a valid DRI field, so we set - * this to power on defaults + DRI field. - */ - ldr r5, [r3, #MDREFR_OFFSET] - bic r5, r5, #0x0ff - bic r5, r5, #0xf00 /* MDREFR user config with zeroed DRI */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - mov r7, r4 - lsl r4, #20 - lsr r4, #20 /* Get a valid DRI field */ - - orr r5, r5, r4 /* MDREFR user config with correct DRI */ - - orr r5, #MDREFR_K0RUN - orr r5, #MDREFR_SLFRSH - bic r5, #MDREFR_APD - bic r5, #MDREFR_E1PIN - - str r5, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 5) Initialize Synchronous Static Memory (Flash/Peripherals) - */ - - /* Initialize SXCNFG register. Assert the enable bits. - * - * Write SXMRS to cause an MRS command to all enabled banks of - * synchronous static memory. Note that SXLCR need not be written - * at this time. - */ - write32rb (MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL - - /* - * 6) Initialize SDRAM - */ - - bic r7, #MDREFR_SLFRSH - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - orr r7, #MDREFR_E1PIN - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure - * but not enable each SDRAM partition pair. - */ - - /* Fetch platform value of MDCNFG */ - ldr r4, =CONFIG_SYS_MDCNFG_VAL - /* Disable all sdram banks */ - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - /* Write initial value of MDCNFG, w/o enabling sdram banks */ - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ - pxa_wait_ticks 0x300 - - /* - * 8) Trigger a number (usually 8) refresh cycles by attempting - * non-burst read or write accesses to disabled SDRAM, as commonly - * specified in the power up sequence documented in SDRAM data - * sheets. The address(es) used for this purpose must not be - * cacheable. - */ - - ldr r4, =CONFIG_SYS_DRAM_BASE -.rept 9 - str r5, [r4] -.endr - - /* - * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). - */ - - ldr r5, =CONFIG_SYS_MDCNFG_VAL - ldr r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3) - and r5, r5, r4 - ldr r4, [r3, #MDCNFG_OFFSET] - orr r4, r4, r5 - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* - * 10) Write MDMRS. - */ - - ldr r4, =CONFIG_SYS_MDMRS_VAL - str r4, [r3, #MDMRS_OFFSET] - ldr r4, [r3, #MDMRS_OFFSET] - - /* - * 11) Enable APD - */ - - ldr r4, [r3, #MDREFR_OFFSET] - and r7, r7, #MDREFR_APD - orr r4, r4, r7 - str r4, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] -.endm - -/* - * This macro tests if the CPU woke up from sleep and eventually resumes - * - * Clobbered regs: r4, r5 - */ -.macro pxa_wakeup - ldr r4, =RCSR - ldr r5, [r4] - and r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) - str r5, [r4] - teq r5, #RCSR_SMR - - bne pxa_wakeup_exit - - ldr r4, =PSSR - mov r5, #PSSR_PH - str r5, [r4] - - ldr r4, =PSPR - ldr pc, [r4] -pxa_wakeup_exit: -.endm - -/* - * This macro disables all interupts on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_intr_setup - write32 ICLR, 0 - write32 ICMR, 0 -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 ICLR2, 0 - write32 ICMR2, 0 -#endif -.endm - -/* - * This macro configures clock on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_clock_setup - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - write32 CKEN, CONFIG_SYS_CKEN - - /* Write CCCR */ - write32 CCCR, CONFIG_SYS_CCCR - -#ifdef CONFIG_RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - write32 OSCC, #OSCC_OON - ldr r4, =OSCC - - /* Spin here until OSCC.OOK get set, meaning the PLL has settled. */ -2: - ldr r5, [r4] - ands r5, r5, #1 - beq 2b -#endif -.endm - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_PXA_MACRO_H__ */ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h new file mode 100644 index 0000000000..8c606e3995 --- /dev/null +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2003 + * David Mueller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c2440.h + * Version : 31.3.2003 + * + * Based on S3C2440 User's manual Rev x.x + ************************************************/ + +#ifndef __S3C2440_H__ +#define __S3C2440_H__ + +#define S3C24X0_UART_CHANNELS 3 +#define S3C24X0_SPI_CHANNELS 2 + +/* S3C2440 only supports 512 Byte HW ECC */ +#define S3C2440_ECCSIZE 512 +#define S3C2440_ECCBYTES 3 + +enum s3c24x0_uarts_nr { + S3C24X0_UART0, + S3C24X0_UART1, + S3C24X0_UART2 +}; + +/* S3C2440 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x48000000 +#define S3C24X0_USB_HOST_BASE 0x49000000 +#define S3C24X0_INTERRUPT_BASE 0x4A000000 +#define S3C24X0_DMA_BASE 0x4B000000 +#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 +#define S3C24X0_LCD_BASE 0x4D000000 +#define S3C2440_NAND_BASE 0x4E000000 +#define S3C24X0_UART_BASE 0x50000000 +#define S3C24X0_TIMER_BASE 0x51000000 +#define S3C24X0_USB_DEVICE_BASE 0x52000140 +#define S3C24X0_WATCHDOG_BASE 0x53000000 +#define S3C24X0_I2C_BASE 0x54000000 +#define S3C24X0_I2S_BASE 0x55000000 +#define S3C24X0_GPIO_BASE 0x56000000 +#define S3C24X0_RTC_BASE 0x57000000 +#define S3C2440_ADC_BASE 0x58000000 +#define S3C24X0_SPI_BASE 0x59000000 +#define S3C2440_SDI_BASE 0x5A000000 + +/* include common stuff */ +#include <asm/arch/s3c24x0.h> + +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) +{ + return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; +} + +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) +{ + return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; +} + +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) +{ + return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; +} + +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) +{ + return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; +} + +static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) +{ + return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; +} + +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) +{ + return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; +} + +static inline struct s3c2440_nand *s3c2440_get_base_nand(void) +{ + return (struct s3c2440_nand *)S3C2440_NAND_BASE; +} + +static inline struct s3c24x0_uart + *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) +{ + return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); +} + +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) +{ + return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; +} + +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) +{ + return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; +} + +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) +{ + return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; +} + +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) +{ + return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; +} + +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) +{ + return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; +} + +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) +{ + return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; +} + +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) +{ + return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; +} + +static inline struct s3c2440_adc *s3c2440_get_base_adc(void) +{ + return (struct s3c2440_adc *)S3C2440_ADC_BASE; +} + +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) +{ + return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; +} + +static inline struct s3c2440_sdi *s3c2440_get_base_sdi(void) +{ + return (struct s3c2440_sdi *)S3C2440_SDI_BASE; +} + +#endif /*__S3C2440_H__*/ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index 15f53dd35b..f634d11296 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -33,12 +33,12 @@ /* Memory controller (see manual chapter 5) */ struct s3c24x0_memctl { - u32 BWSCON; - u32 BANKCON[8]; - u32 REFRESH; - u32 BANKSIZE; - u32 MRSRB6; - u32 MRSRB7; + u32 bwscon; + u32 bankcon[8]; + u32 refresh; + u32 banksize; + u32 mrsrb6; + u32 mrsrb7; }; @@ -72,40 +72,38 @@ struct s3c24x0_usb_host { /* INTERRUPT (see manual chapter 14) */ struct s3c24x0_interrupt { - u32 SRCPND; - u32 INTMOD; - u32 INTMSK; - u32 PRIORITY; - u32 INTPND; - u32 INTOFFSET; -#ifdef CONFIG_S3C2410 - u32 SUBSRCPND; - u32 INTSUBMSK; + u32 srcpnd; + u32 intmod; + u32 intmsk; + u32 priority; + u32 intpnd; + u32 intoffset; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 subsrcpnd; + u32 intsubmsk; #endif }; /* DMAS (see manual chapter 8) */ struct s3c24x0_dma { - u32 DISRC; -#ifdef CONFIG_S3C2410 - u32 DISRCC; + u32 disrc; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 disrcc; #endif - u32 DIDST; -#ifdef CONFIG_S3C2410 - u32 DIDSTC; + u32 didst; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 didstc; #endif - u32 DCON; - u32 DSTAT; - u32 DCSRC; - u32 DCDST; - u32 DMASKTRIG; -#ifdef CONFIG_S3C2400 + u32 dcon; + u32 dstat; + u32 dcsrc; + u32 dcdst; + u32 dmasktrig; +#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) \ + || defined(CONFIG_S3C2440) u32 res[1]; #endif -#ifdef CONFIG_S3C2410 - u32 res[7]; -#endif }; struct s3c24x0_dmas { @@ -116,90 +114,111 @@ struct s3c24x0_dmas { /* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ /* (see S3C2410 manual chapter 7) */ struct s3c24x0_clock_power { - u32 LOCKTIME; - u32 MPLLCON; - u32 UPLLCON; - u32 CLKCON; - u32 CLKSLOW; - u32 CLKDIVN; + u32 locktime; + u32 mpllcon; + u32 upllcon; + u32 clkcon; + u32 clkslow; + u32 clkdivn; +#if defined(CONFIG_S3C2440) + u32 camdivn; +#endif }; /* LCD CONTROLLER (see manual chapter 15) */ struct s3c24x0_lcd { - u32 LCDCON1; - u32 LCDCON2; - u32 LCDCON3; - u32 LCDCON4; - u32 LCDCON5; - u32 LCDSADDR1; - u32 LCDSADDR2; - u32 LCDSADDR3; - u32 REDLUT; - u32 GREENLUT; - u32 BLUELUT; + u32 lcdcon1; + u32 lcdcon2; + u32 lcdcon3; + u32 lcdcon4; + u32 lcdcon5; + u32 lcdsaddr1; + u32 lcdsaddr2; + u32 lcdsaddr3; + u32 redlut; + u32 greenlut; + u32 bluelut; u32 res[8]; - u32 DITHMODE; - u32 TPAL; -#ifdef CONFIG_S3C2410 - u32 LCDINTPND; - u32 LCDSRCPND; - u32 LCDINTMSK; - u32 LPCSEL; + u32 dithmode; + u32 tpal; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 lcdintpnd; + u32 lcdsrcpnd; + u32 lcdintmsk; + u32 lpcsel; #endif }; +#ifdef CONFIG_S3C2410 /* NAND FLASH (see S3C2410 manual chapter 6) */ struct s3c2410_nand { - u32 NFCONF; - u32 NFCMD; - u32 NFADDR; - u32 NFDATA; - u32 NFSTAT; - u32 NFECC; + u32 nfconf; + u32 nfcmd; + u32 nfaddr; + u32 nfdata; + u32 nfstat; + u32 nfecc; +}; +#endif +#ifdef CONFIG_S3C2440 +/* NAND FLASH (see S3C2440 manual chapter 6) */ +struct s3c2440_nand { + u32 nfconf; + u32 nfcont; + u32 nfcmd; + u32 nfaddr; + u32 nfdata; + u32 nfeccd0; + u32 nfeccd1; + u32 nfeccd; + u32 nfstat; + u32 nfstat0; + u32 nfstat1; }; +#endif /* UART (see manual chapter 11) */ struct s3c24x0_uart { - u32 ULCON; - u32 UCON; - u32 UFCON; - u32 UMCON; - u32 UTRSTAT; - u32 UERSTAT; - u32 UFSTAT; - u32 UMSTAT; + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 utrstat; + u32 uerstat; + u32 ufstat; + u32 umstat; #ifdef __BIG_ENDIAN u8 res1[3]; - u8 UTXH; + u8 utxh; u8 res2[3]; - u8 URXH; + u8 urxh; #else /* Little Endian */ - u8 UTXH; + u8 utxh; u8 res1[3]; - u8 URXH; + u8 urxh; u8 res2[3]; #endif - u32 UBRDIV; + u32 ubrdiv; }; /* PWM TIMER (see manual chapter 10) */ struct s3c24x0_timer { - u32 TCNTB; - u32 TCMPB; - u32 TCNTO; + u32 tcntb; + u32 tcmpb; + u32 tcnto; }; struct s3c24x0_timers { - u32 TCFG0; - u32 TCFG1; - u32 TCON; + u32 tcfg0; + u32 tcfg1; + u32 tcon; struct s3c24x0_timer ch[4]; - u32 TCNTB4; - u32 TCNTO4; + u32 tcntb4; + u32 tcnto4; }; @@ -207,9 +226,9 @@ struct s3c24x0_timers { struct s3c24x0_usb_dev_fifos { #ifdef __BIG_ENDIAN u8 res[3]; - u8 EP_FIFO_REG; + u8 ep_fifo_reg; #else /* little endian */ - u8 EP_FIFO_REG; + u8 ep_fifo_reg; u8 res[3]; #endif }; @@ -217,29 +236,29 @@ struct s3c24x0_usb_dev_fifos { struct s3c24x0_usb_dev_dmas { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 EP_DMA_CON; + u8 ep_dma_con; u8 res2[3]; - u8 EP_DMA_UNIT; + u8 ep_dma_unit; u8 res3[3]; - u8 EP_DMA_FIFO; + u8 ep_dma_fifo; u8 res4[3]; - u8 EP_DMA_TTC_L; + u8 ep_dma_ttc_l; u8 res5[3]; - u8 EP_DMA_TTC_M; + u8 ep_dma_ttc_m; u8 res6[3]; - u8 EP_DMA_TTC_H; + u8 ep_dma_ttc_h; #else /* little endian */ - u8 EP_DMA_CON; + u8 ep_dma_con; u8 res1[3]; - u8 EP_DMA_UNIT; + u8 ep_dma_unit; u8 res2[3]; - u8 EP_DMA_FIFO; + u8 ep_dma_fifo; u8 res3[3]; - u8 EP_DMA_TTC_L; + u8 ep_dma_ttc_l; u8 res4[3]; - u8 EP_DMA_TTC_M; + u8 ep_dma_ttc_m; u8 res5[3]; - u8 EP_DMA_TTC_H; + u8 ep_dma_ttc_h; u8 res6[3]; #endif }; @@ -247,69 +266,69 @@ struct s3c24x0_usb_dev_dmas { struct s3c24x0_usb_device { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 FUNC_ADDR_REG; + u8 func_addr_reg; u8 res2[3]; - u8 PWR_REG; + u8 pwr_reg; u8 res3[3]; - u8 EP_INT_REG; + u8 ep_int_reg; u8 res4[15]; - u8 USB_INT_REG; + u8 usb_int_reg; u8 res5[3]; - u8 EP_INT_EN_REG; + u8 ep_int_en_reg; u8 res6[15]; - u8 USB_INT_EN_REG; + u8 usb_int_en_reg; u8 res7[3]; - u8 FRAME_NUM1_REG; + u8 frame_num1_reg; u8 res8[3]; - u8 FRAME_NUM2_REG; + u8 frame_num2_reg; u8 res9[3]; - u8 INDEX_REG; + u8 index_reg; u8 res10[7]; - u8 MAXP_REG; + u8 maxp_reg; u8 res11[3]; - u8 EP0_CSR_IN_CSR1_REG; + u8 ep0_csr_in_csr1_reg; u8 res12[3]; - u8 IN_CSR2_REG; + u8 in_csr2_reg; u8 res13[7]; - u8 OUT_CSR1_REG; + u8 out_csr1_reg; u8 res14[3]; - u8 OUT_CSR2_REG; + u8 out_csr2_reg; u8 res15[3]; - u8 OUT_FIFO_CNT1_REG; + u8 out_fifo_cnt1_reg; u8 res16[3]; - u8 OUT_FIFO_CNT2_REG; + u8 out_fifo_cnt2_reg; #else /* little endian */ - u8 FUNC_ADDR_REG; + u8 func_addr_reg; u8 res1[3]; - u8 PWR_REG; + u8 pwr_reg; u8 res2[3]; - u8 EP_INT_REG; + u8 ep_int_reg; u8 res3[15]; - u8 USB_INT_REG; + u8 usb_int_reg; u8 res4[3]; - u8 EP_INT_EN_REG; + u8 ep_int_en_reg; u8 res5[15]; - u8 USB_INT_EN_REG; + u8 usb_int_en_reg; u8 res6[3]; - u8 FRAME_NUM1_REG; + u8 frame_num1_reg; u8 res7[3]; - u8 FRAME_NUM2_REG; + u8 frame_num2_reg; u8 res8[3]; - u8 INDEX_REG; + u8 index_reg; u8 res9[7]; - u8 MAXP_REG; + u8 maxp_reg; u8 res10[7]; - u8 EP0_CSR_IN_CSR1_REG; + u8 ep0_csr_in_csr1_reg; u8 res11[3]; - u8 IN_CSR2_REG; + u8 in_csr2_reg; u8 res12[3]; - u8 OUT_CSR1_REG; + u8 out_csr1_reg; u8 res13[7]; - u8 OUT_CSR2_REG; + u8 out_csr2_reg; u8 res14[3]; - u8 OUT_FIFO_CNT1_REG; + u8 out_fifo_cnt1_reg; u8 res15[3]; - u8 OUT_FIFO_CNT2_REG; + u8 out_fifo_cnt2_reg; u8 res16[3]; #endif /* __BIG_ENDIAN */ struct s3c24x0_usb_dev_fifos fifo[5]; @@ -319,18 +338,18 @@ struct s3c24x0_usb_device { /* WATCH DOG TIMER (see manual chapter 18) */ struct s3c24x0_watchdog { - u32 WTCON; - u32 WTDAT; - u32 WTCNT; + u32 wtcon; + u32 wtdat; + u32 wtcnt; }; /* IIC (see manual chapter 20) */ struct s3c24x0_i2c { - u32 IICCON; - u32 IICSTAT; - u32 IICADD; - u32 IICDS; + u32 iiccon; + u32 iicstat; + u32 iicadd; + u32 iicds; }; @@ -338,25 +357,25 @@ struct s3c24x0_i2c { struct s3c24x0_i2s { #ifdef __BIG_ENDIAN u16 res1; - u16 IISCON; + u16 iiscon; u16 res2; - u16 IISMOD; + u16 iismod; u16 res3; - u16 IISPSR; + u16 iispsr; u16 res4; - u16 IISFCON; + u16 iisfcon; u16 res5; - u16 IISFIFO; + u16 iisfifo; #else /* little endian */ - u16 IISCON; + u16 iiscon; u16 res1; - u16 IISMOD; + u16 iismod; u16 res2; - u16 IISPSR; + u16 iispsr; u16 res3; - u16 IISFCON; + u16 iisfcon; u16 res4; - u16 IISFIFO; + u16 iisfifo; u16 res5; #endif }; @@ -365,87 +384,146 @@ struct s3c24x0_i2s { /* I/O PORT (see manual chapter 9) */ struct s3c24x0_gpio { #ifdef CONFIG_S3C2400 - u32 PACON; - u32 PADAT; + u32 pacon; + u32 padat; - u32 PBCON; - u32 PBDAT; - u32 PBUP; + u32 pbcon; + u32 pbdat; + u32 pbup; - u32 PCCON; - u32 PCDAT; - u32 PCUP; + u32 pccon; + u32 pcdat; + u32 pcup; - u32 PDCON; - u32 PDDAT; - u32 PDUP; + u32 pdcon; + u32 pddat; + u32 pdup; - u32 PECON; - u32 PEDAT; - u32 PEUP; + u32 pecon; + u32 pedat; + u32 peup; - u32 PFCON; - u32 PFDAT; - u32 PFUP; + u32 pfcon; + u32 pfdat; + u32 pfup; - u32 PGCON; - u32 PGDAT; - u32 PGUP; + u32 pgcon; + u32 pgdat; + u32 pgup; - u32 OPENCR; + u32 opencr; - u32 MISCCR; - u32 EXTINT; + u32 misccr; + u32 extint; #endif #ifdef CONFIG_S3C2410 - u32 GPACON; - u32 GPADAT; + u32 gpacon; + u32 gpadat; + u32 res1[2]; + u32 gpbcon; + u32 gpbdat; + u32 gpbup; + u32 res2; + u32 gpccon; + u32 gpcdat; + u32 gpcup; + u32 res3; + u32 gpdcon; + u32 gpddat; + u32 gpdup; + u32 res4; + u32 gpecon; + u32 gpedat; + u32 gpeup; + u32 res5; + u32 gpfcon; + u32 gpfdat; + u32 gpfup; + u32 res6; + u32 gpgcon; + u32 gpgdat; + u32 gpgup; + u32 res7; + u32 gphcon; + u32 gphdat; + u32 gphup; + u32 res8; + + u32 misccr; + u32 dclkcon; + u32 extint0; + u32 extint1; + u32 extint2; + u32 eintflt0; + u32 eintflt1; + u32 eintflt2; + u32 eintflt3; + u32 eintmask; + u32 eintpend; + u32 gstatus0; + u32 gstatus1; + u32 gstatus2; + u32 gstatus3; + u32 gstatus4; +#endif +#if defined(CONFIG_S3C2440) + u32 gpacon; + u32 gpadat; u32 res1[2]; - u32 GPBCON; - u32 GPBDAT; - u32 GPBUP; + u32 gpbcon; + u32 gpbdat; + u32 gpbup; u32 res2; - u32 GPCCON; - u32 GPCDAT; - u32 GPCUP; + u32 gpccon; + u32 gpcdat; + u32 gpcup; u32 res3; - u32 GPDCON; - u32 GPDDAT; - u32 GPDUP; + u32 gpdcon; + u32 gpddat; + u32 gpdup; u32 res4; - u32 GPECON; - u32 GPEDAT; - u32 GPEUP; + u32 gpecon; + u32 gpedat; + u32 gpeup; u32 res5; - u32 GPFCON; - u32 GPFDAT; - u32 GPFUP; + u32 gpfcon; + u32 gpfdat; + u32 gpfup; u32 res6; - u32 GPGCON; - u32 GPGDAT; - u32 GPGUP; + u32 gpgcon; + u32 gpgdat; + u32 gpgup; u32 res7; - u32 GPHCON; - u32 GPHDAT; - u32 GPHUP; + u32 gphcon; + u32 gphdat; + u32 gphup; u32 res8; - u32 MISCCR; - u32 DCLKCON; - u32 EXTINT0; - u32 EXTINT1; - u32 EXTINT2; - u32 EINTFLT0; - u32 EINTFLT1; - u32 EINTFLT2; - u32 EINTFLT3; - u32 EINTMASK; - u32 EINTPEND; - u32 GSTATUS0; - u32 GSTATUS1; - u32 GSTATUS2; - u32 GSTATUS3; - u32 GSTATUS4; + u32 misccr; + u32 dclkcon; + u32 extint0; + u32 extint1; + u32 extint2; + u32 eintflt0; + u32 eintflt1; + u32 eintflt2; + u32 eintflt3; + u32 eintmask; + u32 eintpend; + u32 gstatus0; + u32 gstatus1; + u32 gstatus2; + u32 gstatus3; + u32 gstatus4; + + u32 res9; + u32 dsc0; + u32 dsc1; + u32 mslcon; + u32 gpjcon; + u32 gpjdat; + u32 gpjup; + u32 res10; #endif }; @@ -454,74 +532,74 @@ struct s3c24x0_gpio { struct s3c24x0_rtc { #ifdef __BIG_ENDIAN u8 res1[67]; - u8 RTCCON; + u8 rtccon; u8 res2[3]; - u8 TICNT; + u8 ticnt; u8 res3[11]; - u8 RTCALM; + u8 rtcalm; u8 res4[3]; - u8 ALMSEC; + u8 almsec; u8 res5[3]; - u8 ALMMIN; + u8 almmin; u8 res6[3]; - u8 ALMHOUR; + u8 almhour; u8 res7[3]; - u8 ALMDATE; + u8 almdate; u8 res8[3]; - u8 ALMMON; + u8 almmon; u8 res9[3]; - u8 ALMYEAR; + u8 almyear; u8 res10[3]; - u8 RTCRST; + u8 rtcrst; u8 res11[3]; - u8 BCDSEC; + u8 bcdsec; u8 res12[3]; - u8 BCDMIN; + u8 bcdmin; u8 res13[3]; - u8 BCDHOUR; + u8 bcdhour; u8 res14[3]; - u8 BCDDATE; + u8 bcddate; u8 res15[3]; - u8 BCDDAY; + u8 bcdday; u8 res16[3]; - u8 BCDMON; + u8 bcdmon; u8 res17[3]; - u8 BCDYEAR; + u8 bcdyear; #else /* little endian */ u8 res0[64]; - u8 RTCCON; + u8 rtccon; u8 res1[3]; - u8 TICNT; + u8 ticnt; u8 res2[11]; - u8 RTCALM; + u8 rtcalm; u8 res3[3]; - u8 ALMSEC; + u8 almsec; u8 res4[3]; - u8 ALMMIN; + u8 almmin; u8 res5[3]; - u8 ALMHOUR; + u8 almhour; u8 res6[3]; - u8 ALMDATE; + u8 almdate; u8 res7[3]; - u8 ALMMON; + u8 almmon; u8 res8[3]; - u8 ALMYEAR; + u8 almyear; u8 res9[3]; - u8 RTCRST; + u8 rtcrst; u8 res10[3]; - u8 BCDSEC; + u8 bcdsec; u8 res11[3]; - u8 BCDMIN; + u8 bcdmin; u8 res12[3]; - u8 BCDHOUR; + u8 bcdhour; u8 res13[3]; - u8 BCDDATE; + u8 bcddate; u8 res14[3]; - u8 BCDDAY; + u8 bcdday; u8 res15[3]; - u8 BCDMON; + u8 bcdmon; u8 res16[3]; - u8 BCDYEAR; + u8 bcdyear; u8 res17[3]; #endif }; @@ -529,34 +607,34 @@ struct s3c24x0_rtc { /* ADC (see manual chapter 16) */ struct s3c2400_adc { - u32 ADCCON; - u32 ADCDAT; + u32 adccon; + u32 adcdat; }; /* ADC (see manual chapter 16) */ struct s3c2410_adc { - u32 ADCCON; - u32 ADCTSC; - u32 ADCDLY; - u32 ADCDAT0; - u32 ADCDAT1; + u32 adccon; + u32 adctsc; + u32 adcdly; + u32 adcdat0; + u32 adcdat1; }; /* SPI (see manual chapter 22) */ struct s3c24x0_spi_channel { - u8 SPCON; + u8 spcon; u8 res1[3]; - u8 SPSTA; + u8 spsta; u8 res2[3]; - u8 SPPIN; + u8 sppin; u8 res3[3]; - u8 SPPRE; + u8 sppre; u8 res4[3]; - u8 SPTDAT; + u8 sptdat; u8 res5[3]; - u8 SPRDAT; + u8 sprdat; u8 res6[3]; u8 res7[16]; }; @@ -570,53 +648,53 @@ struct s3c24x0_spi { struct s3c2400_mmc { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 MMCON; + u8 mmcon; u8 res2[3]; - u8 MMCRR; + u8 mmcrr; u8 res3[3]; - u8 MMFCON; + u8 mmfcon; u8 res4[3]; - u8 MMSTA; + u8 mmsta; u16 res5; - u16 MMFSTA; + u16 mmfsta; u8 res6[3]; - u8 MMPRE; + u8 mmpre; u16 res7; - u16 MMLEN; + u16 mmlen; u8 res8[3]; - u8 MMCR7; - u32 MMRSP[4]; + u8 mmcr7; + u32 mmrsp[4]; u8 res9[3]; - u8 MMCMD0; - u32 MMCMD1; + u8 mmcmd0; + u32 mmcmd1; u16 res10; - u16 MMCR16; + u16 mmcr16; u8 res11[3]; - u8 MMDAT; + u8 mmdat; #else - u8 MMCON; + u8 mmcon; u8 res1[3]; - u8 MMCRR; + u8 mmcrr; u8 res2[3]; - u8 MMFCON; + u8 mmfcon; u8 res3[3]; - u8 MMSTA; + u8 mmsta; u8 res4[3]; - u16 MMFSTA; + u16 mmfsta; u16 res5; - u8 MMPRE; + u8 mmpre; u8 res6[3]; - u16 MMLEN; + u16 mmlen; u16 res7; - u8 MMCR7; + u8 mmcr7; u8 res8[3]; - u32 MMRSP[4]; - u8 MMCMD0; + u32 mmrsp[4]; + u8 mmcmd0; u8 res9[3]; - u32 MMCMD1; - u16 MMCR16; + u32 mmcmd1; + u16 mmcr16; u16 res10; - u8 MMDAT; + u8 mmdat; u8 res11[3]; #endif }; @@ -624,29 +702,29 @@ struct s3c2400_mmc { /* SD INTERFACE (see S3C2410 manual chapter 19) */ struct s3c2410_sdi { - u32 SDICON; - u32 SDIPRE; - u32 SDICARG; - u32 SDICCON; - u32 SDICSTA; - u32 SDIRSP0; - u32 SDIRSP1; - u32 SDIRSP2; - u32 SDIRSP3; - u32 SDIDTIMER; - u32 SDIBSIZE; - u32 SDIDCON; - u32 SDIDCNT; - u32 SDIDSTA; - u32 SDIFSTA; + u32 sdicon; + u32 sdipre; + u32 sdicarg; + u32 sdiccon; + u32 sdicsta; + u32 sdirsp0; + u32 sdirsp1; + u32 sdirsp2; + u32 sdirsp3; + u32 sdidtimer; + u32 sdibsize; + u32 sdidcon; + u32 sdidcnt; + u32 sdidsta; + u32 sdifsta; #ifdef __BIG_ENDIAN u8 res[3]; - u8 SDIDAT; + u8 sdidat; #else - u8 SDIDAT; + u8 sdidat; u8 res[3]; #endif - u32 SDIIMSK; + u32 sdiimsk; }; #endif /*__S3C24X0_H__*/ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h index c37d4a108d..54184c460b 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h @@ -22,6 +22,8 @@ #include <asm/arch/s3c2400.h> #elif defined CONFIG_S3C2410 #include <asm/arch/s3c2410.h> +#elif defined CONFIG_S3C2440 + #include <asm/arch/s3c2440.h> #else #error Please define the s3c24x0 cpu type #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index 68c59d13e3..48de64d9c3 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -65,7 +65,7 @@ struct mmc_host { unsigned int clock; /* Current clock (MHz) */ }; -int s5p_mmc_init(int dev_index); +int s5p_mmc_init(int dev_index, int bus_width); #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h index 2d7ad7ec98..f6eeab45cd 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/uart.h +++ b/arch/arm/include/asm/arch-s5pc1xx/uart.h @@ -24,6 +24,12 @@ #define __ASM_ARCH_UART_H_ #ifndef __ASSEMBLY__ +/* baudrate rest value */ +union br_rest { + unsigned short slot; /* udivslot */ + unsigned char value; /* ufracval */ +}; + struct s5p_uart { unsigned int ulcon; unsigned int ucon; @@ -38,10 +44,12 @@ struct s5p_uart { unsigned char urxh; unsigned char res2[3]; unsigned int ubrdiv; - unsigned short udivslot; - unsigned char res3[2]; - unsigned char res4[0x3d0]; + union br_rest rest; + unsigned char res3[0x3d0]; }; + +static int use_divslot = 1; + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 4124f0a992..c60dba26bf 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -21,9 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all ARM boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 5438ebc5fb..ada3fbb641 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -61,7 +61,6 @@ typedef struct global_data { unsigned long tbu; unsigned long long timer_reset_value; #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) unsigned long relocaddr; /* Start address of U-Boot in RAM */ phys_size_t ram_size; /* RAM size */ unsigned long mon_len; /* monitor len */ @@ -71,7 +70,6 @@ typedef struct global_data { #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE)) unsigned long tlb_addr; #endif -#endif void **jt; /* jump table */ char env_buf[32]; /* buffer for getenv() before reloc. */ } gd_t; diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index 4ac4f612e9..33973a32e0 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -34,16 +34,12 @@ extern ulong _bss_start_ofs; /* BSS start relative to _start */ extern ulong _bss_end_ofs; /* BSS end relative to _start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -extern ulong _armboot_start_ofs; /* code start */ -#else extern ulong _TEXT_BASE; /* code start */ extern ulong _datarel_start_ofs; extern ulong _datarelrolocal_start_ofs; extern ulong _datarellocal_start_ofs; extern ulong _datarelro_start_ofs; extern ulong IRQ_STACK_START_IN; /* 8 bytes in IRQ stack */ -#endif /* cpu/.../cpu.c */ int cpu_init(void); @@ -56,9 +52,7 @@ int arch_misc_init(void); /* board/.../... */ int board_init(void); int dram_init (void); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) void dram_init_banksize (void); -#endif void setup_serial_tag (struct tag **params); void setup_revision_tag (struct tag **params); diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index af9a414b88..1fd5f8362f 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -127,11 +127,7 @@ static int init_baudrate (void) char tmp[64]; /* long enough for environment variables */ int i = getenv_f("baudrate", tmp, sizeof (tmp)); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) gd->baudrate = (i > 0) -#else - gd->bd->bi_baudrate = gd->baudrate = (i > 0) -#endif ? (int) simple_strtoul (tmp, NULL, 10) : CONFIG_BAUDRATE; @@ -142,11 +138,7 @@ static int display_banner (void) { printf ("\n\n%s\n\n", version_string); debug ("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) _TEXT_BASE, -#else - _armboot_start, -#endif _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE); #ifdef CONFIG_MODEM_SUPPORT debug ("Modem Support enabled\n"); @@ -190,16 +182,6 @@ static int display_dram_config (void) return (0); } -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -#ifndef CONFIG_SYS_NO_FLASH -static void display_flash_config (ulong size) -{ - puts ("Flash: "); - print_size (size, "\n"); -} -#endif /* CONFIG_SYS_NO_FLASH */ -#endif - #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) static int init_func_i2c (void) { @@ -246,214 +228,6 @@ typedef int (init_fnc_t) (void); int print_cpuinfo (void); -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -init_fnc_t *init_sequence[] = { -#if defined(CONFIG_ARCH_CPU_INIT) - arch_cpu_init, /* basic arch cpu dependent setup */ -#endif - board_init, /* basic board dependent setup */ -#if defined(CONFIG_USE_IRQ) - interrupt_init, /* set up exceptions */ -#endif - timer_init, /* initialize timer */ -#ifdef CONFIG_FSL_ESDHC - get_clocks, -#endif - env_init, /* initialize environment */ - init_baudrate, /* initialze baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, /* stage 1 init of console */ - display_banner, /* say that we are here */ -#if defined(CONFIG_DISPLAY_CPUINFO) - print_cpuinfo, /* display cpu info (and speed) */ -#endif -#if defined(CONFIG_DISPLAY_BOARDINFO) - checkboard, /* display board info */ -#endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) - init_func_i2c, -#endif - dram_init, /* configure available RAM banks */ -#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) - arm_pci_init, -#endif - display_dram_config, - NULL, -}; - -void start_armboot (void) -{ - init_fnc_t **init_fnc_ptr; - char *s; -#if defined(CONFIG_VFD) || defined(CONFIG_LCD) - unsigned long addr; -#endif - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t)); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - - memset ((void*)gd, 0, sizeof (gd_t)); - gd->bd = (bd_t*)((char*)gd - sizeof(bd_t)); - memset (gd->bd, 0, sizeof (bd_t)); - - gd->flags |= GD_FLG_RELOC; - - monitor_flash_len = _bss_start - _armboot_start; - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } - - /* armboot_start is defined in the board-specific linker script */ - mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN, - CONFIG_SYS_MALLOC_LEN); - -#ifndef CONFIG_SYS_NO_FLASH - /* configure available FLASH banks */ - display_flash_config (flash_init ()); -#endif /* CONFIG_SYS_NO_FLASH */ - -#ifdef CONFIG_VFD -# ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -# endif - /* - * reserve memory for VFD display (always full pages) - */ - /* bss_end is defined in the board-specific linker script */ - addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - vfd_setmem (addr); - gd->fb_base = addr; -#endif /* CONFIG_VFD */ - -#ifdef CONFIG_LCD - /* board init may have inited fb_base */ - if (!gd->fb_base) { -# ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -# endif - /* - * reserve memory for LCD display (always full pages) - */ - /* bss_end is defined in the board-specific linker script */ - addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - lcd_setmem (addr); - gd->fb_base = addr; - } -#endif /* CONFIG_LCD */ - -#if defined(CONFIG_CMD_NAND) - puts ("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#if defined(CONFIG_CMD_ONENAND) - onenand_init(); -#endif - -#ifdef CONFIG_HAS_DATAFLASH - AT91F_DataflashInit(); - dataflash_print_info(); -#endif - -#ifdef CONFIG_GENERIC_MMC -/* - * MMC initialization is called before relocating env. - * Thus It is required that operations like pin multiplexer - * be put in board_init. - */ - puts ("MMC: "); - mmc_initialize (gd->bd); -#endif - - /* initialize environment */ - env_relocate (); - -#ifdef CONFIG_VFD - /* must do this after the framebuffer is allocated */ - drv_vfd_init(); -#endif /* CONFIG_VFD */ - -#ifdef CONFIG_SERIAL_MULTI - serial_initialize(); -#endif - - /* IP Address */ - gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - - stdio_init (); /* get the devices list going. */ - - jumptable_init (); - -#if defined(CONFIG_API) - /* Initialize API */ - api_init (); -#endif - - console_init_r (); /* fully init console as a device */ - -#if defined(CONFIG_ARCH_MISC_INIT) - /* miscellaneous arch dependent initialisations */ - arch_misc_init (); -#endif -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r (); -#endif - - /* enable exceptions */ - enable_interrupts (); - - /* Perform network card initialisation if necessary */ - -#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) - /* XXX: this needs to be moved to board init */ - if (getenv ("ethaddr")) { - uchar enetaddr[6]; - eth_getenv_enetaddr("ethaddr", enetaddr); - smc_set_mac_addr(enetaddr); - } -#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - - /* Initialize from environment */ - if ((s = getenv ("loadaddr")) != NULL) { - load_addr = simple_strtoul (s, NULL, 16); - } -#if defined(CONFIG_CMD_NET) - if ((s = getenv ("bootfile")) != NULL) { - copy_filename (BootFile, s, sizeof (BootFile)); - } -#endif - -#ifdef BOARD_LATE_INIT - board_late_init (); -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) -#if defined(CONFIG_NET_MULTI) - puts ("Net: "); -#endif - eth_initialize(gd->bd); -#if defined(CONFIG_RESET_PHY_R) - debug ("Reset Ethernet PHY\n"); - reset_phy(); -#endif -#endif - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { - main_loop (); - } - - /* NOTREACHED - no way out of command loop except booting */ -} -#else void __dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; @@ -679,15 +453,6 @@ void board_init_r (gd_t *id, ulong dest_addr) #if !defined(CONFIG_SYS_NO_FLASH) ulong flash_size; #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - extern void malloc_bin_reloc (void); -#if defined(CONFIG_CMD_BMP) - extern void bmp_reloc(void); -#endif -#if defined(CONFIG_CMD_I2C) - extern void i2c_reloc(void); -#endif -#endif gd = id; bd = gd->bd; @@ -704,39 +469,16 @@ void board_init_r (gd_t *id, ulong dest_addr) debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - /* - * We have to relocate the command table manually - */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#if defined(CONFIG_CMD_BMP) - bmp_reloc(); -#endif -#if defined(CONFIG_CMD_I2C) - i2c_reloc(); -#endif -#if defined(CONFIG_CMD_ONENAND) - onenand_reloc(); -#endif -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ - #ifdef CONFIG_LOGBUFFER logbuff_init_ptrs (); #endif #ifdef CONFIG_POST post_output_backlog (); -#ifndef CONFIG_RELOC_FIXUP_WORKS - post_reloc (); -#endif #endif /* The Malloc area is immediately below the monitor copy in DRAM */ malloc_start = dest_addr - TOTAL_MALLOC_LEN; mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN); -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - malloc_bin_reloc (); -#endif #if !defined(CONFIG_SYS_NO_FLASH) puts ("FLASH: "); @@ -900,8 +642,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* NOTREACHED - no way out of command loop except booting */ } -#endif /* defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index fe6d45987b..d9175f0583 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -44,7 +44,6 @@ static void cp_delay (void) asm volatile("" : : : "memory"); } -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) static inline void dram_bank_mmu_setup(int bank) { u32 *page_table = (u32 *)gd->tlb_addr; @@ -58,18 +57,11 @@ static inline void dram_bank_mmu_setup(int bank) page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; } } -#endif /* to activate the MMU we need to set up virtual memory: use 1M areas */ static inline void mmu_setup(void) { -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) u32 *page_table = (u32 *)gd->tlb_addr; -#else - static u32 __attribute__((aligned(16384))) page_table[4096]; - bd_t *bd = gd->bd; - int j; -#endif int i; u32 reg; @@ -77,20 +69,9 @@ static inline void mmu_setup(void) for (i = 0; i < 4096; i++) page_table[i] = i << 20 | (3 << 10) | 0x12; -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { dram_bank_mmu_setup(i); } -#else - /* Then, enable cacheable and bufferable for RAM only */ - for (j = 0; j < CONFIG_NR_DRAM_BANKS; j++) { - for (i = bd->bi_dram[j].start >> 20; - i < (bd->bi_dram[j].start + bd->bi_dram[j].size) >> 20; - i++) { - page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; - } - } -#endif /* Copy the page table address to cp15 */ asm volatile("mcr p15, 0, %0, c2, c0, 0" diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index 90aa04b87f..74ff5ce1c4 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -46,12 +46,8 @@ int interrupt_init (void) /* * setup up stacks if necessary */ -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) IRQ_STACK_START = gd->irq_sp - 4; IRQ_STACK_START_IN = gd->irq_sp + 8; -#else - IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - GENERATED_GBL_DATA_SIZE - 4; -#endif FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; return arch_interrupt_init(); @@ -86,7 +82,6 @@ int disable_interrupts (void) return (old & 0x80) == 0; } #else -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int interrupt_init (void) { /* @@ -96,7 +91,6 @@ int interrupt_init (void) return 0; } -#endif void enable_interrupts (void) { diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h index 049c44eaf8..02fbfb3abf 100644 --- a/arch/avr32/include/asm/config.h +++ b/arch/avr32/include/asm/config.h @@ -21,4 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #endif diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 96ccc7fa79..8b56237f18 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -272,13 +272,13 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) monitor_flash_len = _edata - _text; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index a3300841a0..ab117ca5ad 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -26,8 +26,6 @@ CROSS_COMPILE ?= bfin-uclinux- STANDALONE_LOAD_ADDR = 0x1000 -m elf32bfin CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE))) -CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET))) -CONFIG_ENV_SIZE := $(strip $(subst ",,$(CONFIG_ENV_SIZE))) PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 34ca68c9d5..04372525cc 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -9,13 +9,13 @@ #ifndef __ASM_BLACKFIN_CONFIG_POST_H__ #define __ASM_BLACKFIN_CONFIG_POST_H__ +/* Some of our defines use this (like CONFIG_SYS_GBL_DATA_ADDR) */ +#include <asm-offsets.h> + #ifndef CONFIG_BFIN_SCRATCH_REG # define CONFIG_BFIN_SCRATCH_REG retn #endif -/* Relocation to SDRAM works on all Blackfin boards */ -#define CONFIG_RELOC_FIXUP_WORKS - /* Make sure the structure is properly aligned */ #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR) # error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned diff --git a/arch/i386/include/asm/config.h b/arch/i386/include/asm/config.h index 1952de79f8..049c44eaf8 100644 --- a/arch/i386/include/asm/config.h +++ b/arch/i386/include/asm/config.h @@ -21,6 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index ec2cc16beb..51050a39a3 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -21,6 +21,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #define CONFIG_SYS_BOOT_GET_CMDLINE diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 976d5bf28a..9a51908858 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -420,13 +420,13 @@ void board_init_r (gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&__init_end - dest_addr; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index 8a9064b3c8..049c44eaf8 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all Microblaze boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index 049c44eaf8..02fbfb3abf 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -21,4 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #endif diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 4a22f7b41c..f317124155 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -295,13 +295,13 @@ void board_init_r (gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&uboot_end_data - dest_addr; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/nios2/include/asm/config.h b/arch/nios2/include/asm/config.h index 011d603a4b..049c44eaf8 100644 --- a/arch/nios2/include/asm/config.h +++ b/arch/nios2/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all NIOS2 boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index a1942ca2bd..76dedebe67 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -89,9 +89,6 @@ #define CONFIG_SYS_NUM_TLBCAMS 16 #endif -/* Relocation to SDRAM works on all PPC boards */ -#define CONFIG_RELOC_FIXUP_WORKS - /* Since so many PPC SOCs have a semi-common LBC, define this here */ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ defined(CONFIG_MPC83xx) diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h index 978cc92f40..049c44eaf8 100644 --- a/arch/sh/include/asm/config.h +++ b/arch/sh/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all sh boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h index 6ddc3494c6..7b6f30bd4a 100644 --- a/arch/sparc/include/asm/config.h +++ b/arch/sparc/include/asm/config.h @@ -21,6 +21,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 4a6041f51c..ab31cfb50a 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -252,13 +252,13 @@ void board_init_f(ulong bootflag) post_run(NULL, POST_ROM | post_bootmode_get(0)); #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP) puts("AMBA:\n"); diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index b60a46e96d..fa9dd9fe4d 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -33,15 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} -#else int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -56,7 +47,6 @@ void dram_init_banksize(void) gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = gd->ram_size; } -#endif #ifdef CONFIG_DRIVER_TI_EMAC diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 7c0b858887..ed5ed44826 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -225,20 +225,6 @@ U_BOOT_CMD( ); #endif -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), - kw_sdram_bs(i)); - } - - return 0; -} -#else int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -259,7 +245,6 @@ void dram_init_banksize(void) kw_sdram_bs(i)); } } -#endif /* Configure and enable MV88E1118 PHY */ void reset_phy(void) diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index eaeec828d7..978e6fdeff 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -78,42 +78,43 @@ int board_init(void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x002AAAAA; - gpio->GPBUP = 0x000002BF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x000037F7; - gpio->GPFCON = 0x00000000; - gpio->GPFUP = 0x00000000; - gpio->GPGCON = 0xFFEAFF5A; - gpio->GPGUP = 0x0000F0DC; - gpio->GPHCON = 0x0028AAAA; - gpio->GPHUP = 0x00000656; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x002AAAAA; + gpio->gpbup = 0x000002BF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x000037F7; + gpio->gpfcon = 0x00000000; + gpio->gpfup = 0x00000000; + gpio->gpgcon = 0xFFEAFF5A; + gpio->gpgup = 0x0000F0DC; + gpio->gphcon = 0x0028AAAA; + gpio->gphup = 0x00000656; /* setup correct IRQ modes for NIC */ - gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */ + /* rising edge mode */ + gpio->extint2 = (gpio->extint2 & ~(7<<8)) | (4<<8); /* select USB port 2 to be host or device (fix to host for now) */ - gpio->MISCCR |= 0x08; + gpio->misccr |= 0x08; /* init serial */ gd->baudrate = CONFIG_BAUDRATE; diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 4336729113..0b09ebaf89 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -87,6 +87,6 @@ int board_mmc_init(bd_t *bis) gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); } - return s5p_mmc_init(0); + return s5p_mmc_init(0, 4); } #endif diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 1294d3f1b1..895bd7789a 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -52,30 +52,30 @@ int board_init (void) /* memory and cpu-speed are setup before relocation */ /* change the clock to be 50 MHz 1:1:1 */ - clk_power->MPLLCON = 0x5c042; - clk_power->CLKDIVN = 0; + clk_power->mpllcon = 0x5c042; + clk_power->clkdivn = 0; /* set up the I/O ports */ - gpio->PACON = 0x3ffff; - gpio->PBCON = 0xaaaaaaaa; - gpio->PBUP = 0xffff; - gpio->PECON = 0x0; - gpio->PEUP = 0x0; + gpio->pacon = 0x3ffff; + gpio->pbcon = 0xaaaaaaaa; + gpio->pbup = 0xffff; + gpio->pecon = 0x0; + gpio->peup = 0x0; #ifdef CONFIG_HWFLOW /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ /* 10, 10, 00, 00, 10, 00, 10 */ - gpio->PFCON=0xa22; + gpio->pfcon = 0xa22; /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - gpio->PFUP=0x35; + gpio->pfup = 0x35; #else /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ /* 00, 00, 00, 00, 10, 00, 10 */ - gpio->PFCON = 0x22; + gpio->pfcon = 0x22; /* Disable pull-up on Rx and Tx pins */ - gpio->PFUP = 0x5; + gpio->pfup = 0x5; #endif /* CONFIG_HWFLOW */ - gpio->PGCON = 0x0; - gpio->PGUP = 0x0; - gpio->OPENCR = 0x0; + gpio->pgcon = 0x0; + gpio->pgup = 0x0; + gpio->opencr = 0x0; /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2400; diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index 5d1a8bb0cf..76a24bb939 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -73,36 +73,36 @@ int board_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x00044555; - gpio->GPBUP = 0x000007FF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x0000FFFF; - gpio->GPFCON = 0x000055AA; - gpio->GPFUP = 0x000000FF; - gpio->GPGCON = 0xFF95FFBA; - gpio->GPGUP = 0x0000FFFF; - gpio->GPHCON = 0x002AFAAA; - gpio->GPHUP = 0x000007FF; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x00044555; + gpio->gpbup = 0x000007FF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x0000FFFF; + gpio->gpfcon = 0x000055AA; + gpio->gpfup = 0x000000FF; + gpio->gpgcon = 0xFF95FFBA; + gpio->gpgup = 0x0000FFFF; + gpio->gphcon = 0x002AFAAA; + gpio->gphup = 0x000007FF; /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index 3a936778ec..c82382dc82 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -80,40 +80,40 @@ int board_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x00044556; - gpio->GPBUP = 0x000007FF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x0000FFFF; - gpio->GPFCON = 0x000055AA; - gpio->GPFUP = 0x000000FF; - gpio->GPGCON = 0xFF95FF3A; - gpio->GPGUP = 0x0000FFFF; - gpio->GPHCON = 0x0016FAAA; - gpio->GPHUP = 0x000007FF; - - gpio->EXTINT0=0x22222222; - gpio->EXTINT1=0x22222222; - gpio->EXTINT2=0x22222222; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x00044556; + gpio->gpbup = 0x000007FF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x0000FFFF; + gpio->gpfcon = 0x000055AA; + gpio->gpfup = 0x000000FF; + gpio->gpgcon = 0xFF95FF3A; + gpio->gpgup = 0x0000FFFF; + gpio->gphcon = 0x0016FAAA; + gpio->gphup = 0x000007FF; + + gpio->extint0 = 0x22222222; + gpio->extint1 = 0x22222222; + gpio->extint2 = 0x22222222; /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index ca4415c0b9..dec3c61827 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -637,28 +637,28 @@ static int adc_read (unsigned int channel) adc_init (); - padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ - padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */ - padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START); + padc->adccon &= ~ADC_STDBM; /* select normal mode */ + padc->adccon &= ~(0x7 << 3); /* clear the channel bits */ + padc->adccon |= ((channel << 3) | ADC_ENABLE_START); while (j--) { - if ((padc->ADCCON & ADC_ENABLE_START) == 0) + if ((padc->adccon & ADC_ENABLE_START) == 0) break; udelay (1); } if (j == 0) { printf("%s: ADC timeout\n", __FUNCTION__); - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ return -1; } - result = padc->ADCDAT & 0x3FF; + result = padc->adcdat & 0x3FF; - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__, - (padc->ADCCON >> 3) & 0x7, result); + (padc->adccon >> 3) & 0x7, result); /* * Wait for ADC to be ready for next conversion. This delay value was @@ -676,8 +676,8 @@ static void adc_init (void) padc = s3c2400_get_base_adc(); - padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ - padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ + padc->adccon &= ~(0xff << 6); /* clear prescaler bits */ + padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ /* * Wait some time to avoid problem with very first call of @@ -699,10 +699,10 @@ static void led_set (unsigned int state) switch (state) { case 0: /* turn LED off */ - gpio->PADAT |= (1 << 12); + gpio->padat |= (1 << 12); break; case 1: /* turn LED on */ - gpio->PADAT &= ~(1 << 12); + gpio->padat &= ~(1 << 12); break; default: break; @@ -729,8 +729,8 @@ static void led_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPA12 as output and set to High -> LED off */ - gpio->PACON &= ~(1 << 12); - gpio->PADAT |= (1 << 12); + gpio->pacon &= ~(1 << 12); + gpio->padat |= (1 << 12); } diff --git a/board/trab/rs485.c b/board/trab/rs485.c index 6a3a4cda9c..30336f262c 100644 --- a/board/trab/rs485.c +++ b/board/trab/rs485.c @@ -51,16 +51,16 @@ static void rs485_setbrg (void) reg = (33000000 / (16 * 38400)) - 1; /* FIFO enable, Tx/Rx FIFO clear */ - uart->UFCON = 0x07; - uart->UMCON = 0x0; + uart->ufcon = 0x07; + uart->umcon = 0x0; /* Normal,No parity,1 stop,8 bit */ - uart->ULCON = 0x3; + uart->ulcon = 0x3; /* * tx=level,rx=edge,disable timeout int.,enable rx error int., * normal,interrupt or polling */ - uart->UCON = 0x245; - uart->UBRDIV = reg; + uart->ucon = 0x245; + uart->ubrdiv = reg; for (i = 0; i < 100; i++); } @@ -69,16 +69,16 @@ static void rs485_cfgio (void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PFCON &= ~(0x3 << 2); - gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */ + gpio->pfcon &= ~(0x3 << 2); + gpio->pfcon |= (0x2 << 2); /* configure GPF1 as RXD1 */ - gpio->PFCON &= ~(0x3 << 6); - gpio->PFCON |= (0x2 << 6); /* configure GPF3 as TXD1 */ + gpio->pfcon &= ~(0x3 << 6); + gpio->pfcon |= (0x2 << 6); /* configure GPF3 as TXD1 */ - gpio->PFUP |= (1 << 1); /* disable pullup on GPF1 */ - gpio->PFUP |= (1 << 3); /* disable pullup on GPF3 */ + gpio->pfup |= (1 << 1); /* disable pullup on GPF1 */ + gpio->pfup |= (1 << 3); /* disable pullup on GPF3 */ - gpio->PACON &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */ + gpio->pacon &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */ } /* @@ -104,9 +104,10 @@ int rs485_getc (void) struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); /* wait for character to arrive */ - while (!(uart->UTRSTAT & 0x1)); + while (!(uart->utrstat & 0x1)) + ; - return uart->URXH & 0xff; + return uart->urxh & 0xff; } /* @@ -117,9 +118,10 @@ void rs485_putc (const char c) struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); /* wait for room in the tx FIFO */ - while (!(uart->UTRSTAT & 0x2)); + while (!(uart->utrstat & 0x2)) + ; - uart->UTXH = c; + uart->utxh = c; /* If \n, also do \r */ if (c == '\n') @@ -133,7 +135,7 @@ int rs485_tstc (void) { struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); - return uart->UTRSTAT & 0x1; + return uart->utrstat & 0x1; } void rs485_puts (const char *s) @@ -172,9 +174,9 @@ static void set_rs485de(unsigned char rs485de_state) /* This is on PORT A bit 11 */ if(rs485de_state) - gpio->PADAT |= (1 << 11); + gpio->padat |= (1 << 11); else - gpio->PADAT &= ~(1 << 11); + gpio->padat &= ~(1 << 11); } diff --git a/board/trab/trab.c b/board/trab/trab.c index 828facd763..0f74e8fa1b 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -77,36 +77,36 @@ int board_init () #ifdef CONFIG_TRAB_50MHZ /* change the clock to be 50 MHz 1:1:1 */ /* MDIV:0x5c PDIV:4 SDIV:2 */ - clk_power->MPLLCON = 0x5c042; - clk_power->CLKDIVN = 0; + clk_power->mpllcon = 0x5c042; + clk_power->clkdivn = 0; #else /* change the clock to be 133 MHz 1:2:4 */ /* MDIV:0x7d PDIV:4 SDIV:1 */ - clk_power->MPLLCON = 0x7d041; - clk_power->CLKDIVN = 3; + clk_power->mpllcon = 0x7d041; + clk_power->clkdivn = 3; #endif /* set up the I/O ports */ - gpio->PACON = 0x3ffff; - gpio->PBCON = 0xaaaaaaaa; - gpio->PBUP = 0xffff; + gpio->pacon = 0x3ffff; + gpio->pbcon = 0xaaaaaaaa; + gpio->pbup = 0xffff; /* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */ /* 00, 10, 10, 10, 10, 10, 10 */ - gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); + gpio->pfcon = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); #ifdef CONFIG_HWFLOW /* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */ - gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); + gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); #else /* do not pull up RXD0, RXD1, TXD0, TXD1 */ - gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3); + gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3); #endif - gpio->PGCON = 0x0; - gpio->PGUP = 0x0; - gpio->OPENCR= 0x0; + gpio->pgcon = 0x0; + gpio->pgup = 0x0; + gpio->opencr = 0x0; /* suppress flicker of the VFDs */ - gpio->MISCCR = 0x40; - gpio->PFCON |= (2<<12); + gpio->misccr = 0x40; + gpio->pfcon |= (2<<12); gd->bd->bi_arch_number = MACH_TYPE_TRAB; @@ -114,8 +114,8 @@ int board_init () gd->bd->bi_boot_params = 0x0c000100; /* Make sure both buzzers are turned off */ - gpio->PDCON |= 0x5400; - gpio->PDDAT &= ~0xE0; + gpio->pdcon |= 0x5400; + gpio->pddat &= ~0xE0; #ifdef CONFIG_VFD vfd_init_clocks(); @@ -132,7 +132,7 @@ int board_init () #ifdef CONFIG_DRIVER_S3C24X0_I2C /* Configure I/O ports PG5 und PG6 for I2C */ - gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00; + gpio->pgcon = (gpio->pgcon & 0x003c00) | 0x003c00; #endif /* CONFIG_DRIVER_S3C24X0_I2C */ return 0; @@ -341,14 +341,14 @@ static inline void SET_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT &= 0x5FF; + gpio->pddat &= 0x5FF; } static inline void CLR_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT |= 0x200; + gpio->pddat |= 0x200; } static void spi_init(void) @@ -358,20 +358,20 @@ static void spi_init(void) int i; /* Configure I/O ports. */ - gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; - gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; - gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; - gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; + gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000; + gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000; + gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000; + gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000; CLR_CS_TOUCH(); - spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */ - spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ - spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ + spi->ch[0].sppre = 0x1F; /* Baudrate ca. 514kHz */ + spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].spcon = 0x1A; /* Polling, Prescale, Master, CPOL=0, CPHA=1 */ /* Dummy byte ensures clock to be low. */ for (i = 0; i < 10; i++) { - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; } wait_transmit_done(); } @@ -380,7 +380,8 @@ static void wait_transmit_done(void) { struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); - while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ + while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */ + ; } static void tsc2000_write(unsigned int page, unsigned int reg, @@ -394,13 +395,13 @@ static void tsc2000_write(unsigned int page, unsigned int reg, command |= (page << 11); command |= (reg << 5); - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; + spi->ch[0].sptdat = (data & 0xFF00) >> 8; wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0x00FF); + spi->ch[0].sptdat = (data & 0x00FF); wait_transmit_done(); CLR_CS_TOUCH(); diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index 268162e53a..fe3dab351f 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -411,28 +411,28 @@ static int adc_read (unsigned int channel) padc = s3c2400_get_base_adc(); channel &= 0x7; - padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ - padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */ - padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START); + padc->adccon &= ~ADC_STDBM; /* select normal mode */ + padc->adccon &= ~(0x7 << 3); /* clear the channel bits */ + padc->adccon |= ((channel << 3) | ADC_ENABLE_START); while (j--) { - if ((padc->ADCCON & ADC_ENABLE_START) == 0) + if ((padc->adccon & ADC_ENABLE_START) == 0) break; udelay (1); } if (j == 0) { printf("%s: ADC timeout\n", __FUNCTION__); - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ return -1; } - result = padc->ADCDAT & 0x3FF; + result = padc->adcdat & 0x3FF; - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__, - (padc->ADCCON >> 3) & 0x7, result); + (padc->adccon >> 3) & 0x7, result); /* * Wait for ADC to be ready for next conversion. This delay value was @@ -450,8 +450,8 @@ static void adc_init (void) padc = s3c2400_get_base_adc(); - padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ - padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ + padc->adccon &= ~(0xff << 6); /* clear prescaler bits */ + padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ /* * Wait some time to avoid problem with very first call of @@ -493,10 +493,10 @@ int do_power_switch (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPE7 as input */ - gpio->PECON &= ~(0x3 << (2 * 7)); + gpio->pecon &= ~(0x3 << (2 * 7)); /* signal GPE7 from power switch is low active: 0=on , 1=off */ - result = ((gpio->PEDAT & (1 << 7)) == (1 << 7)) ? 0 : 1; + result = ((gpio->pedat & (1 << 7)) == (1 << 7)) ? 0 : 1; print_identifier (); printf("%d\n", result); @@ -561,17 +561,17 @@ int do_vfd_id (void) /* try to red vfd board id from the value defined by pull-ups */ - pcup_old = gpio->PCUP; - pccon_old = gpio->PCCON; + pcup_old = gpio->pcup; + pccon_old = gpio->pccon; - gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pull-ups */ - gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as + gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pull-ups */ + gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* configure GPC0...GPC3 as * inputs */ udelay (10); /* allow signals to settle */ - vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ + vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */ - gpio->PCCON = pccon_old; - gpio->PCUP = pcup_old; + gpio->pccon = pccon_old; + gpio->pcup = pcup_old; /* print vfd_board_id to console */ print_identifier (); @@ -593,40 +593,40 @@ int do_buzzer (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* set prescaler for timer 2, 3 and 4 */ - timers->TCFG0 &= ~0xFF00; - timers->TCFG0 |= 0x0F00; + timers->tcfg0 &= ~0xFF00; + timers->tcfg0 |= 0x0F00; /* set divider for timer 2 */ - timers->TCFG1 &= ~0xF00; - timers->TCFG1 |= 0x300; + timers->tcfg1 &= ~0xF00; + timers->tcfg1 |= 0x300; /* set frequency */ counter = (PCLK / BUZZER_FREQ) >> 9; - timers->ch[2].TCNTB = counter; - timers->ch[2].TCMPB = counter / 2; + timers->ch[2].tcntb = counter; + timers->ch[2].tcmpb = counter / 2; if (strcmp (argv[2], "on") == 0) { debug ("%s: frequency: %d\n", __FUNCTION__, BUZZER_FREQ); /* configure pin GPD7 as TOUT2 */ - gpio->PDCON &= ~0xC000; - gpio->PDCON |= 0x8000; + gpio->pdcon &= ~0xC000; + gpio->pdcon |= 0x8000; /* start */ - timers->TCON = (timers->TCON | UPDATE2 | RELOAD2) & + timers->tcon = (timers->tcon | UPDATE2 | RELOAD2) & ~INVERT2; - timers->TCON = (timers->TCON | START2) & ~UPDATE2; + timers->tcon = (timers->tcon | START2) & ~UPDATE2; return (0); } else if (strcmp (argv[2], "off") == 0) { /* stop */ - timers->TCON &= ~(START2 | RELOAD2); + timers->tcon &= ~(START2 | RELOAD2); /* configure GPD7 as output and set to low */ - gpio->PDCON &= ~0xC000; - gpio->PDCON |= 0x4000; - gpio->PDDAT &= ~0x80; + gpio->pdcon &= ~0xC000; + gpio->pdcon |= 0x4000; + gpio->pddat &= ~0x80; return (0); } @@ -640,12 +640,12 @@ int do_led (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure PC14 and PC15 as output */ - gpio->PCCON &= ~(0xF << 28); - gpio->PCCON |= (0x5 << 28); + gpio->pccon &= ~(0xF << 28); + gpio->pccon |= (0x5 << 28); /* configure PD0 and PD4 as output */ - gpio->PDCON &= ~((0x3 << 8) | 0x3); - gpio->PDCON |= ((0x1 << 8) | 0x1); + gpio->pdcon &= ~((0x3 << 8) | 0x3); + gpio->pdcon |= ((0x1 << 8) | 0x1); switch (simple_strtoul(argv[2], NULL, 10)) { @@ -655,30 +655,30 @@ int do_led (char * const *argv) case 2: if (strcmp (argv[3], "on") == 0) - gpio->PCDAT |= (1 << 14); + gpio->pcdat |= (1 << 14); else - gpio->PCDAT &= ~(1 << 14); + gpio->pcdat &= ~(1 << 14); return 0; case 3: if (strcmp (argv[3], "on") == 0) - gpio->PCDAT |= (1 << 15); + gpio->pcdat |= (1 << 15); else - gpio->PCDAT &= ~(1 << 15); + gpio->pcdat &= ~(1 << 15); return 0; case 4: if (strcmp (argv[3], "on") == 0) - gpio->PDDAT |= (1 << 0); + gpio->pddat |= (1 << 0); else - gpio->PDDAT &= ~(1 << 0); + gpio->pddat &= ~(1 << 0); return 0; case 5: if (strcmp (argv[3], "on") == 0) - gpio->PDDAT |= (1 << 4); + gpio->pddat |= (1 << 4); else - gpio->PDDAT &= ~(1 << 4); + gpio->pddat &= ~(1 << 4); return 0; default: @@ -695,22 +695,22 @@ int do_full_bridge (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure PD5 and PD6 as output */ - gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2)); - gpio->PDCON |= ((0x1 << 5*2) | (0x1 << 6*2)); + gpio->pdcon &= ~((0x3 << 5*2) | (0x3 << 6*2)); + gpio->pdcon |= ((0x1 << 5*2) | (0x1 << 6*2)); if (strcmp (argv[2], "+") == 0) { - gpio->PDDAT |= (1 << 5); - gpio->PDDAT |= (1 << 6); + gpio->pddat |= (1 << 5); + gpio->pddat |= (1 << 6); return 0; } else if (strcmp (argv[2], "-") == 0) { - gpio->PDDAT &= ~(1 << 5); - gpio->PDDAT |= (1 << 6); + gpio->pddat &= ~(1 << 5); + gpio->pddat |= (1 << 6); return 0; } else if (strcmp (argv[2], "off") == 0) { - gpio->PDDAT &= ~(1 << 5); - gpio->PDDAT &= ~(1 << 6); + gpio->pddat &= ~(1 << 5); + gpio->pddat &= ~(1 << 6); return 0; } printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); @@ -804,15 +804,15 @@ int do_motor (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* Configure I/O port */ - gpio->PGCON &= ~(0x3 << 0); - gpio->PGCON |= (0x1 << 0); + gpio->pgcon &= ~(0x3 << 0); + gpio->pgcon |= (0x1 << 0); if (strcmp (argv[2], "on") == 0) { - gpio->PGDAT &= ~(1 << 0); + gpio->pgdat &= ~(1 << 0); return 0; } if (strcmp (argv[2], "off") == 0) { - gpio->PGDAT |= (1 << 0); + gpio->pgdat |= (1 << 0); return 0; } printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); @@ -832,36 +832,36 @@ int do_pwm (char * const *argv) if (strcmp (argv[2], "on") == 0) { /* configure pin GPD8 as TOUT3 */ - gpio->PDCON &= ~(0x3 << 8*2); - gpio->PDCON |= (0x2 << 8*2); + gpio->pdcon &= ~(0x3 << 8*2); + gpio->pdcon |= (0x2 << 8*2); /* set prescaler for timer 2, 3 and 4 */ - timers->TCFG0 &= ~0xFF00; - timers->TCFG0 |= 0x0F00; + timers->tcfg0 &= ~0xFF00; + timers->tcfg0 |= 0x0F00; /* set divider for timer 3 */ - timers->TCFG1 &= ~(0xf << 12); - timers->TCFG1 |= (0x3 << 12); + timers->tcfg1 &= ~(0xf << 12); + timers->tcfg1 |= (0x3 << 12); /* set frequency */ counter = (PCLK / PWM_FREQ) >> 9; - timers->ch[3].TCNTB = counter; - timers->ch[3].TCMPB = counter / 2; + timers->ch[3].tcntb = counter; + timers->ch[3].tcmpb = counter / 2; /* start timer */ - timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3; - timers->TCON = (timers->TCON | START3) & ~UPDATE3; + timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3; + timers->tcon = (timers->tcon | START3) & ~UPDATE3; return 0; } if (strcmp (argv[2], "off") == 0) { /* stop timer */ - timers->TCON &= ~(START2 | RELOAD2); + timers->tcon &= ~(START2 | RELOAD2); /* configure pin GPD8 as output and set to 0 */ - gpio->PDCON &= ~(0x3 << 8*2); - gpio->PDCON |= (0x1 << 8*2); - gpio->PDDAT &= ~(1 << 8); + gpio->pdcon &= ~(0x3 << 8*2); + gpio->pdcon |= (0x1 << 8*2); + gpio->pddat &= ~(1 << 8); return 0; } printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index 5890624f0f..426ed9c520 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -50,21 +50,21 @@ void tsc2000_spi_init(void) int i; /* Configure I/O ports. */ - gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; - gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; - gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; - gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; + gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000; + gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000; + gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000; + gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000; CLR_CS_TOUCH(); - spi->ch[0].SPPRE = 0x1F; /* Baud-rate ca. 514kHz */ - spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ - spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, + spi->ch[0].sppre = 0x1F; /* Baud-rate ca. 514kHz */ + spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].spcon = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ /* Dummy byte ensures clock to be low. */ for (i = 0; i < 10; i++) { - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; } spi_wait_transmit_done(); } @@ -74,7 +74,8 @@ void spi_wait_transmit_done(void) { struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); - while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ + while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */ + ; } @@ -85,13 +86,13 @@ void tsc2000_write(unsigned short reg, unsigned short data) SET_CS_TOUCH(); command = reg; - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; + spi->ch[0].sptdat = (data & 0xFF00) >> 8; spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0x00FF); + spi->ch[0].sptdat = (data & 0x00FF); spi_wait_transmit_done(); CLR_CS_TOUCH(); @@ -106,19 +107,19 @@ unsigned short tsc2000_read (unsigned short reg) SET_CS_TOUCH(); command = 0x8000 | reg; - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); spi_wait_transmit_done(); - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; spi_wait_transmit_done(); - data = spi->ch[0].SPRDAT; - spi->ch[0].SPTDAT = 0xFF; + data = spi->ch[0].sprdat; + spi->ch[0].sptdat = 0xFF; spi_wait_transmit_done(); CLR_CS_TOUCH(); - return (spi->ch[0].SPRDAT & 0x0FF) | (data << 8); + return (spi->ch[0].sprdat & 0x0FF) | (data << 8); } diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h index 0b6253f656..f3cecb928e 100644 --- a/board/trab/tsc2000.h +++ b/board/trab/tsc2000.h @@ -29,45 +29,49 @@ #define _TSC2000_H_ /* temperature channel multiplexer definitions */ -#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100) -#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF) -#define SET_MUX0 (gpio->PCDAT |= 0x00010) - -#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400) -#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF) -#define SET_MUX1 (gpio->PCDAT |= 0x00020) - -#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000) -#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040) -#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF) - -#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000) -#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080) -#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F) - -#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000) -#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100) -#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF) - -#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000) -#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200) -#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF) - -#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000) -#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF) -#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400) - -#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000) -#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF) -#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800) - -#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000) -#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF) -#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000) - -#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000) -#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF) -#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000) +#define CON_MUX0 (gpio->pccon = (gpio->pccon & 0x0FFFFFCFF) | 0x00000100) +#define CLR_MUX0 (gpio->pcdat &= 0x0FFEF) +#define SET_MUX0 (gpio->pcdat |= 0x00010) + +#define CON_MUX1 (gpio->pccon = (gpio->pccon & 0x0FFFFF3FF) | 0x00000400) +#define CLR_MUX1 (gpio->pcdat &= 0x0FFDF) +#define SET_MUX1 (gpio->pcdat |= 0x00020) + +#define CON_MUX1_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFFCFFF) | 0x00001000) +#define CLR_MUX1_ENABLE (gpio->pcdat |= 0x00040) +#define SET_MUX1_ENABLE (gpio->pcdat &= 0x0FFBF) + +#define CON_MUX2_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFF3FFF) | 0x00004000) +#define CLR_MUX2_ENABLE (gpio->pcdat |= 0x00080) +#define SET_MUX2_ENABLE (gpio->pcdat &= 0x0FF7F) + +#define CON_MUX3_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFCFFFF) | 0x00010000) +#define CLR_MUX3_ENABLE (gpio->pcdat |= 0x00100) +#define SET_MUX3_ENABLE (gpio->pcdat &= 0x0FEFF) + +#define CON_MUX4_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFF3FFFF) | 0x00040000) +#define CLR_MUX4_ENABLE (gpio->pcdat |= 0x00200) +#define SET_MUX4_ENABLE (gpio->pcdat &= 0x0FDFF) + +#define CON_SEL_TEMP_V_0 (gpio->pccon = (gpio->pccon & 0x0FFCFFFFF) | \ + 0x00100000) +#define CLR_SEL_TEMP_V_0 (gpio->pcdat &= 0x0FBFF) +#define SET_SEL_TEMP_V_0 (gpio->pcdat |= 0x00400) + +#define CON_SEL_TEMP_V_1 (gpio->pccon = (gpio->pccon & 0x0FF3FFFFF) | \ + 0x00400000) +#define CLR_SEL_TEMP_V_1 (gpio->pcdat &= 0x0F7FF) +#define SET_SEL_TEMP_V_1 (gpio->pcdat |= 0x00800) + +#define CON_SEL_TEMP_V_2 (gpio->pccon = (gpio->pccon & 0x0FCFFFFFF) | \ + 0x01000000) +#define CLR_SEL_TEMP_V_2 (gpio->pcdat &= 0x0EFFF) +#define SET_SEL_TEMP_V_2 (gpio->pcdat |= 0x01000) + +#define CON_SEL_TEMP_V_3 (gpio->pccon = (gpio->pccon & 0x0F3FFFFFF) | \ + 0x04000000) +#define CLR_SEL_TEMP_V_3 (gpio->pcdat &= 0x0DFFF) +#define SET_SEL_TEMP_V_3 (gpio->pcdat |= 0x02000) /* TSC2000 register definition */ #define TSC2000_REG_X ((0 << 11) | (0 << 5)) @@ -130,7 +134,7 @@ static inline void SET_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT &= 0x5FF; + gpio->pddat &= 0x5FF; } @@ -138,7 +142,7 @@ static inline void CLR_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT |= 0x200; + gpio->pddat |= 0x200; } #endif /* _TSC2000_H_ */ diff --git a/board/trab/vfd.c b/board/trab/vfd.c index b7eb8cce03..9a2b1ba1a5 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -365,12 +365,12 @@ int vfd_init_clocks (void) /* try to determine display type from the value * defined by pull-ups */ - gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */ - gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */ + gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pullups */ + gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* cfg GPC0...GPC3 inputs */ /* allow signals to settle */ for (i=0; i<10000; i++) /* udelay isn't working yet at this point! */ __asm__("NOP"); - vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ + vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */ VFD_DISABLE; /* activate blank for the vfd */ @@ -381,39 +381,39 @@ int vfd_init_clocks (void) /* If new board revision, then use PWM 3 as cpld-clock */ /* Enable 500 Hz timer for fill level sensor to operate properly */ /* Configure TOUT3 as functional pin, disable pull-up */ - gpio->PDCON &= ~0x30000; - gpio->PDCON |= 0x20000; - gpio->PDUP |= (1 << 8); + gpio->pdcon &= ~0x30000; + gpio->pdcon |= 0x20000; + gpio->pdup |= (1 << 8); /* Configure the prescaler */ - timers->TCFG0 &= ~0xff00; - timers->TCFG0 |= 0x0f00; + timers->tcfg0 &= ~0xff00; + timers->tcfg0 |= 0x0f00; /* Select MUX input (divider) for timer3 (1/16) */ - timers->TCFG1 &= ~0xf000; - timers->TCFG1 |= 0x3000; + timers->tcfg1 &= ~0xf000; + timers->tcfg1 |= 0x3000; /* Enable autoreload and set the counter and compare * registers to values for the 500 Hz clock * (for a given prescaler (15) and divider (16)): * counter = (66000000 / 500) >> 9; */ - timers->ch[3].TCNTB = 0x101; - timers->ch[3].TCMPB = 0x101 / 2; + timers->ch[3].tcntb = 0x101; + timers->ch[3].tcmpb = 0x101 / 2; /* Start timer */ - timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3; - timers->TCON = (timers->TCON | START3) & ~UPDATE3; + timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3; + timers->tcon = (timers->tcon | START3) & ~UPDATE3; } #endif /* If old board revision, then use vm-signal as cpld-clock */ - lcd->LCDCON2 = 0x00FFC000; - lcd->LCDCON3 = 0x0007FF00; - lcd->LCDCON4 = 0x00000000; - lcd->LCDCON5 = 0x00000400; - lcd->LCDCON1 = 0x00000B75; + lcd->lcdcon2 = 0x00FFC000; + lcd->lcdcon3 = 0x0007FF00; + lcd->lcdcon4 = 0x00000000; + lcd->lcdcon5 = 0x00000400; + lcd->lcdcon1 = 0x00000B75; /* VM (GPD1) is used as clock for the CPLD */ - gpio->PDCON = (gpio->PDCON & 0xFFFFFFF3) | 0x00000008; + gpio->pdcon = (gpio->pdcon & 0xFFFFFFF3) | 0x00000008; return 0; } @@ -485,40 +485,44 @@ int drv_vfd_init(void) * see manual S3C2400 */ /* Stopp LCD-Controller */ - lcd->LCDCON1 = 0x00000000; + lcd->lcdcon1 = 0x00000000; /* frame buffer startadr */ - lcd->LCDSADDR1 = gd->fb_base >> 1; + lcd->lcdsaddr1 = gd->fb_base >> 1; /* frame buffer endadr */ - lcd->LCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1; - lcd->LCDSADDR3 = ((256/4)); - lcd->LCDCON2 = 0x000DC000; + lcd->lcdsaddr2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1; + lcd->lcdsaddr3 = ((256/4)); + lcd->lcdcon2 = 0x000DC000; if(gd->vfd_type == VFD_TYPE_MN11236) - lcd->LCDCON2 = 37 << 14; /* MN11236: 38 lines */ + lcd->lcdcon2 = 37 << 14; /* MN11236: 38 lines */ else - lcd->LCDCON2 = 55 << 14; /* T119C: 56 lines */ - lcd->LCDCON3 = 0x0051000A; - lcd->LCDCON4 = 0x00000001; + lcd->lcdcon2 = 55 << 14; /* T119C: 56 lines */ + lcd->lcdcon3 = 0x0051000A; + lcd->lcdcon4 = 0x00000001; if (gd->vfd_type && vfd_inv_data) - lcd->LCDCON5 = 0x000004C0; + lcd->lcdcon5 = 0x000004C0; else - lcd->LCDCON5 = 0x00000440; + lcd->lcdcon5 = 0x00000440; /* Port pins as LCD output */ - gpio->PCCON = (gpio->PCCON & 0xFFFFFF00)| 0x000000AA; - gpio->PDCON = (gpio->PDCON & 0xFFFFFF03)| 0x000000A8; + gpio->pccon = (gpio->pccon & 0xFFFFFF00) | 0x000000AA; + gpio->pdcon = (gpio->pdcon & 0xFFFFFF03) | 0x000000A8; /* Synchronize VFD enable with LCD controller to avoid flicker */ - lcd->LCDCON1 = 0x00000B75; /* Start LCD-Controller */ - while((lcd->LCDCON5 & 0x180000)!=0x100000); /* Wait for end of VSYNC */ - while((lcd->LCDCON5 & 0x060000)!=0x040000); /* Wait for next HSYNC */ - while((lcd->LCDCON5 & 0x060000)==0x040000); - while((lcd->LCDCON5 & 0x060000)!=0x000000); + lcd->lcdcon1 = 0x00000B75; /* Start LCD-Controller */ + while ((lcd->lcdcon5 & 0x180000) != 0x100000) /* Wait for VSYNC end */ + ; + while ((lcd->lcdcon5 & 0x060000) != 0x040000) /* Wait for next HSYNC */ + ; + while ((lcd->lcdcon5 & 0x060000) == 0x040000) + ; + while ((lcd->lcdcon5 & 0x060000) != 0x000000) + ; if(gd->vfd_type) VFD_ENABLE; - debug ("LCDSADDR1: %lX\n", lcd->LCDSADDR1); - debug ("LCDSADDR2: %lX\n", lcd->LCDSADDR2); - debug ("LCDSADDR3: %lX\n", lcd->LCDSADDR3); + debug("LCDSADDR1: %lX\n", lcd->lcdsaddr1); + debug("LCDSADDR2: %lX\n", lcd->lcdsaddr2); + debug("LCDSADDR3: %lX\n", lcd->lcdsaddr3); return 0; } @@ -532,8 +536,8 @@ void disable_vfd (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); VFD_DISABLE; - gpio->PDCON &= ~0xC; - gpio->PDUP &= ~0x2; + gpio->pdcon &= ~0xC; + gpio->pdup &= ~0x2; } /************************************************************************/ diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index 071dad66c4..f8ef4fc9c5 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -160,19 +160,8 @@ u32 get_board_rev(void) int dram_init(void) { -#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); -#if (CONFIG_NR_DRAM_BANKS > 1) - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); -#endif -#else gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); -#endif return 0; } @@ -682,9 +671,6 @@ void lcd_enable(void) int board_init(void) { -#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC - board_early_init_f(); -#endif gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */ /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 51b75ffc5b..bba7374609 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -343,7 +343,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("ip_addr = %pI4\n", &bd->bi_ip_addr); #endif printf ("baudrate = %d bps\n", bd->bi_baudrate); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE)) print_num ("TLB addr", gd->tlb_addr); #endif @@ -352,7 +351,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num ("irq_sp", gd->irq_sp); /* irq stack pointer */ print_num ("sp start ", gd->start_addr_sp); print_num ("FB base ", gd->fb_base); -#endif return 0; } diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index 6fa8a15023..f2a48f751c 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -137,7 +137,7 @@ static cmd_tbl_t cmd_bmp_sub[] = { U_BOOT_CMD_MKENT(display, 5, 0, do_bmp_display, "", ""), }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void bmp_reloc(void) { fixup_cmdtable(cmd_bmp_sub, ARRAY_SIZE(cmd_bmp_sub)); } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index ce3c77c615..1a024f168f 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -590,7 +590,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong load_end = 0; int ret; boot_os_fn *boot_fn; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC static int relocated = 0; /* relocate boot function table */ diff --git a/common/cmd_date.c b/common/cmd_date.c index 50b4240267..8dbf16d32a 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -35,10 +35,10 @@ const char *weekdays[] = { "Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur", }; -#ifdef CONFIG_RELOC_FIXUP_WORKS -#define RELOC(a) a -#else +#ifdef CONFIG_NEEDS_MANUAL_RELOC #define RELOC(a) ((typeof(a))((unsigned long)(a) + gd->reloc_off)) +#else +#define RELOC(a) a #endif int mk_date (char *, struct rtc_time *); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 0a0cfceb45..c272b0dd4f 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1284,7 +1284,7 @@ static cmd_tbl_t cmd_i2c_sub[] = { U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""), }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void i2c_reloc(void) { fixup_cmdtable(cmd_i2c_sub, ARRAY_SIZE(cmd_i2c_sub)); } diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 3d30c321d5..3fd8abc157 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -837,7 +837,7 @@ static cmd_tbl_t cmd_env_sub[] = { U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""), }; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) void env_reloc(void) { fixup_cmdtable(cmd_env_sub, ARRAY_SIZE(cmd_env_sub)); diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 5550b40b81..33108f1b34 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -525,7 +525,7 @@ static cmd_tbl_t cmd_onenand_sub[] = { U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""), }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void onenand_reloc(void) { fixup_cmdtable(cmd_onenand_sub, ARRAY_SIZE(cmd_onenand_sub)); } diff --git a/common/command.c b/common/command.c index d47d719779..0020eacf5c 100644 --- a/common/command.c +++ b/common/command.c @@ -466,7 +466,7 @@ int cmd_get_data_size(char* arg, int default_size) } #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) DECLARE_GLOBAL_DATA_PTR; void fixup_cmdtable(cmd_tbl_t *cmdtp, int size) diff --git a/common/dlmalloc.c b/common/dlmalloc.c index fce7a762b1..4871f4b099 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1491,7 +1491,7 @@ static mbinptr av_[NAV * 2 + 2] = { IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127) }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void malloc_bin_reloc (void) { unsigned long *p = (unsigned long *)(&av_[2]); diff --git a/common/env_common.c b/common/env_common.c index 5acda4d49e..a276efc634 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -227,7 +227,7 @@ int env_import(const char *buf, int check) void env_relocate (void) { -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) extern void env_reloc(void); env_reloc(); diff --git a/common/hush.c b/common/hush.c index 4dd9513b03..2188fd4ac8 100644 --- a/common/hush.c +++ b/common/hush.c @@ -3268,7 +3268,7 @@ int parse_file_outer(void) } #ifdef __U_BOOT__ -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC static void u_boot_hush_reloc(void) { unsigned long addr; @@ -3290,7 +3290,7 @@ int u_boot_hush_start(void) top_vars->next = 0; top_vars->flg_export = 0; top_vars->flg_read_only = 1; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC u_boot_hush_reloc(); #endif } diff --git a/common/image.c b/common/image.c index 89c10b8596..42f5b79cf2 100644 --- a/common/image.c +++ b/common/image.c @@ -520,7 +520,7 @@ char *get_table_entry_name (table_entry_t *table, char *msg, int id) { for (; table->id >= 0; ++table) { if (table->id == id) -#if defined(USE_HOSTCC) || defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC) return table->lname; #else return table->lname + gd->reloc_off; @@ -585,10 +585,10 @@ int get_table_entry_id (table_entry_t *table, fprintf (stderr, "\n"); #else for (t = table; t->id >= 0; ++t) { -#ifdef CONFIG_RELOC_FIXUP_WORKS - if (t->sname && strcmp(t->sname, name) == 0) -#else +#ifdef CONFIG_NEEDS_MANUAL_RELOC if (t->sname && strcmp(t->sname + gd->reloc_off, name) == 0) +#else + if (t->sname && strcmp(t->sname, name) == 0) #endif return (t->id); } diff --git a/common/serial.c b/common/serial.c index c3323ea51a..051ae4e1d2 100644 --- a/common/serial.c +++ b/common/serial.c @@ -99,7 +99,7 @@ struct serial_device *default_serial_console(void) __attribute__((weak, alias("_ int serial_register (struct serial_device *dev) { -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC dev->init += gd->reloc_off; dev->setbrg += gd->reloc_off; dev->getc += gd->reloc_off; diff --git a/common/stdio.c b/common/stdio.c index 25013693f7..ab7c5abde1 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -193,7 +193,7 @@ int stdio_deregister(char *devname) int stdio_init (void) { -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* already relocated for current ARM implementation */ ulong relocation_offset = gd->reloc_off; int i; @@ -203,7 +203,7 @@ int stdio_init (void) stdio_names[i] = (char *) (((ulong) stdio_names[i]) + relocation_offset); } -#endif /* !CONFIG_RELOC_FIXUP_WORKS */ +#endif /* CONFIG_NEEDS_MANUAL_RELOC */ /* Initialize the list */ INIT_LIST_HEAD(&(devs.list)); diff --git a/disk/part.c b/disk/part.c index 2b63db6c75..13723f23b3 100644 --- a/disk/part.c +++ b/disk/part.c @@ -81,13 +81,13 @@ block_dev_desc_t *get_dev(char* ifname, int dev) char *name; name = drvr->name; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC name += gd->reloc_off; #endif while (name) { name = drvr->name; reloc_get_dev = drvr->get_dev; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC name += gd->reloc_off; reloc_get_dev += gd->reloc_off; #endif diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index dc7be7e42e..c0957c210c 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -34,18 +34,10 @@ At lib level: Board.c code is adapted from ppc code -At config level: - - Define CONFIG_RELOC_FIXUP_WORKS. - Undefine CONFIG_SYS_ARM_WITHOUT_RELOC - * WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING * Boards which are not fixed to support relocation will be REMOVED! -Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC and CONFIG_RELOC_FIXUP_WORKS will -disappear and boards which have to migrated to relocation will disappear too. - ----------------------------------------------------------------------------- For boards which boot from nand_spl, it is possible to save one copy diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt index ffe261513c..180ead5d81 100644 --- a/doc/feature-removal-schedule.txt +++ b/doc/feature-removal-schedule.txt @@ -6,33 +6,6 @@ from U-Boot, its corresponding entry should also be removed from this file. --------------------------- -What: CONFIG_SYS_ARM_WITHOUT_RELOC option -When: After Release 2011.03 - -Why: The implementation of U-Boot for the ARM architecture has - been reworked to support relocation. This allows to - efficiently use the same U-Boot binary image on systems with - different RAM sizes, and brings the implementation much more - in line with the code used for example on Power Architecture - systems (eventually allowing to merge into common code). This - seems especailly interesting now that ARM is getting Device - Tree support as well. - - All ARM boards need to be adapted to this new code, which - requires testing on the actual hardware, so this is a task - for the respective board maintainers or other users. - - Please see the commit message of commit f1d2b31 for details: - - http://git.denx.de/?p=u-boot.git;a=commit;h=f1d2b31 - - Support for CONFIG_SYS_ARM_WITHOUT_RELOC will be removed - after release v2011.03; all boards that have not been - converted by then, i. e. that are still broken then, are - considered unmaintained and without interest for the - community and will be removed as well. - ---------------------------- What: CONFIG_NET_MULTI option When: Release 2009-11 diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index c8371cf730..ba6f39bee1 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -58,10 +58,10 @@ static int GetI2CSDA(void) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #ifdef CONFIG_S3C2410 - return (readl(&gpio->GPEDAT) & 0x8000) >> 15; + return (readl(&gpio->gpedat) & 0x8000) >> 15; #endif #ifdef CONFIG_S3C2400 - return (readl(&gpio->PGDAT) & 0x0020) >> 5; + return (readl(&gpio->pgdat) & 0x0020) >> 5; #endif } @@ -77,10 +77,10 @@ static void SetI2CSCL(int x) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #ifdef CONFIG_S3C2410 - writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT); + writel((readl(&gpio->gpedat) & ~0x4000) | (x & 1) << 14, &gpio->gpedat); #endif #ifdef CONFIG_S3C2400 - writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT); + writel((readl(&gpio->pgdat) & ~0x0040) | (x & 1) << 6, &gpio->pgdat); #endif } @@ -90,26 +90,26 @@ static int WaitForXfer(void) int i; i = I2C_TIMEOUT * 10000; - while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) { + while (!(readl(&i2c->iiccon) & I2CCON_IRPND) && (i > 0)) { udelay(100); i--; } - return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; + return (readl(&i2c->iiccon) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; } static int IsACK(void) { struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK); + return !(readl(&i2c->iicstat) & I2CSTAT_NACK); } static void ReadWriteByte(void) { struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON); + writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } void i2c_init(int speed, int slaveadd) @@ -122,30 +122,30 @@ void i2c_init(int speed, int slaveadd) /* wait for some time to give previous transfer a chance to finish */ i = I2C_TIMEOUT * 1000; - while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) { + while ((readl(&i2c->iicstat) && I2CSTAT_BSY) && (i > 0)) { udelay(1000); i--; } - if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) { + if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) { #ifdef CONFIG_S3C2410 - ulong old_gpecon = readl(&gpio->GPECON); + ulong old_gpecon = readl(&gpio->gpecon); #endif #ifdef CONFIG_S3C2400 - ulong old_gpecon = readl(&gpio->PGCON); + ulong old_gpecon = readl(&gpio->pgcon); #endif /* bus still busy probably by (most) previously interrupted transfer */ #ifdef CONFIG_S3C2410 /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ - writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000, - &gpio->GPECON); + writel((readl(&gpio->gpecon) & ~0xF0000000) | 0x10000000, + &gpio->gpecon); #endif #ifdef CONFIG_S3C2400 /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */ - writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000, - &gpio->PGCON); + writel((readl(&gpio->pgcon) & ~0x00003c00) | 0x00001000, + &gpio->pgcon); #endif /* toggle I2CSCL until bus idle */ @@ -164,10 +164,10 @@ void i2c_init(int speed, int slaveadd) /* restore pin functions */ #ifdef CONFIG_S3C2410 - writel(old_gpecon, &gpio->GPECON); + writel(old_gpecon, &gpio->gpecon); #endif #ifdef CONFIG_S3C2400 - writel(old_gpecon, &gpio->PGCON); + writel(old_gpecon, &gpio->pgcon); #endif } @@ -183,13 +183,13 @@ void i2c_init(int speed, int slaveadd) /* set prescaler, divisor according to freq, also set * ACKGEN, IRQ */ - writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON); + writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon); /* init to SLAVE REVEIVE and set slaveaddr */ - writel(0, &i2c->IICSTAT); - writel(slaveadd, &i2c->IICADD); + writel(0, &i2c->iicstat); + writel(slaveadd, &i2c->iicadd); /* program Master Transmit (and implicit STOP) */ - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT); + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); } @@ -218,47 +218,47 @@ int i2c_transfer(unsigned char cmd_type, /* Check I2C bus idle */ i = I2C_TIMEOUT * 1000; - while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) { + while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) { udelay(1000); i--; } - if (readl(&i2c->IICSTAT) & I2CSTAT_BSY) + if (readl(&i2c->iicstat) & I2CSTAT_BSY) return I2C_NOK_TOUT; - writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON); + writel(readl(&i2c->iiccon) | 0x80, &i2c->iiccon); result = I2C_OK; switch (cmd_type) { case I2C_WRITE: if (addr && addr_len) { - writel(chip, &i2c->IICDS); + writel(chip, &i2c->iicds); /* send START */ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP, - &i2c->IICSTAT); + &i2c->iicstat); i = 0; while ((i < addr_len) && (result == I2C_OK)) { result = WaitForXfer(); - writel(addr[i], &i2c->IICDS); + writel(addr[i], &i2c->iicds); ReadWriteByte(); i++; } i = 0; while ((i < data_len) && (result == I2C_OK)) { result = WaitForXfer(); - writel(data[i], &i2c->IICDS); + writel(data[i], &i2c->iicds); ReadWriteByte(); i++; } } else { - writel(chip, &i2c->IICDS); + writel(chip, &i2c->iicds); /* send START */ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP, - &i2c->IICSTAT); + &i2c->iicstat); i = 0; while ((i < data_len) && (result = I2C_OK)) { result = WaitForXfer(); - writel(data[i], &i2c->IICDS); + writel(data[i], &i2c->iicds); ReadWriteByte(); i++; } @@ -268,42 +268,42 @@ int i2c_transfer(unsigned char cmd_type, result = WaitForXfer(); /* send STOP */ - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT); + writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); ReadWriteByte(); break; case I2C_READ: if (addr && addr_len) { - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT); - writel(chip, &i2c->IICDS); + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); + writel(chip, &i2c->iicds); /* send START */ - writel(readl(&i2c->IICSTAT) | I2C_START_STOP, - &i2c->IICSTAT); + writel(readl(&i2c->iicstat) | I2C_START_STOP, + &i2c->iicstat); result = WaitForXfer(); if (IsACK()) { i = 0; while ((i < addr_len) && (result == I2C_OK)) { - writel(addr[i], &i2c->IICDS); + writel(addr[i], &i2c->iicds); ReadWriteByte(); result = WaitForXfer(); i++; } - writel(chip, &i2c->IICDS); + writel(chip, &i2c->iicds); /* resend START */ writel(I2C_MODE_MR | I2C_TXRX_ENA | - I2C_START_STOP, &i2c->IICSTAT); + I2C_START_STOP, &i2c->iicstat); ReadWriteByte(); result = WaitForXfer(); i = 0; while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - writel(readl(&i2c->IICCON) - & ~0x80, &i2c->IICCON); + writel(readl(&i2c->iiccon) + & ~0x80, &i2c->iiccon); ReadWriteByte(); result = WaitForXfer(); - data[i] = readl(&i2c->IICDS); + data[i] = readl(&i2c->iicds); i++; } } else { @@ -311,11 +311,11 @@ int i2c_transfer(unsigned char cmd_type, } } else { - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT); - writel(chip, &i2c->IICDS); + writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); + writel(chip, &i2c->iicds); /* send START */ - writel(readl(&i2c->IICSTAT) | I2C_START_STOP, - &i2c->IICSTAT); + writel(readl(&i2c->iicstat) | I2C_START_STOP, + &i2c->iicstat); result = WaitForXfer(); if (IsACK()) { @@ -323,11 +323,11 @@ int i2c_transfer(unsigned char cmd_type, while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - writel(readl(&i2c->IICCON) & - ~0x80, &i2c->IICCON); + writel(readl(&i2c->iiccon) & + ~0x80, &i2c->iiccon); ReadWriteByte(); result = WaitForXfer(); - data[i] = readl(&i2c->IICDS); + data[i] = readl(&i2c->iicds); i++; } } else { @@ -336,7 +336,7 @@ int i2c_transfer(unsigned char cmd_type, } /* send STOP */ - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT); + writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); ReadWriteByte(); break; diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c index 1fd425cbb6..195b5be39e 100644 --- a/drivers/mmc/s5p_mmc.c +++ b/drivers/mmc/s5p_mmc.c @@ -352,11 +352,16 @@ static void mmc_set_ios(struct mmc *mmc) ctrl = readb(&host->reg->hostctl); /* + * WIDE8[5] + * 0 = Depend on WIDE4 + * 1 = 8-bit mode * WIDE4[1] * 1 = 4-bit mode * 0 = 1-bit mode */ - if (mmc->bus_width == 4) + if (mmc->bus_width == 8) + ctrl |= (1 << 5); + else if (mmc->bus_width == 4) ctrl |= (1 << 1); else ctrl &= ~(1 << 1); @@ -437,7 +442,7 @@ static int mmc_core_init(struct mmc *mmc) return 0; } -static int s5p_mmc_initialize(int dev_index) +static int s5p_mmc_initialize(int dev_index, int bus_width) { struct mmc *mmc; @@ -450,7 +455,11 @@ static int s5p_mmc_initialize(int dev_index) mmc->init = mmc_core_init; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS; + if (bus_width == 8) + mmc->host_caps = MMC_MODE_8BIT; + else + mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; mmc->f_min = 400000; mmc->f_max = 52000000; @@ -462,7 +471,7 @@ static int s5p_mmc_initialize(int dev_index) return 0; } -int s5p_mmc_init(int dev_index) +int s5p_mmc_init(int dev_index, int bus_width) { - return s5p_mmc_initialize(dev_index); + return s5p_mmc_initialize(dev_index, bus_width); } diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c index 47d6872fd0..c0e068ab7d 100644 --- a/drivers/mtd/nand/nand.c +++ b/drivers/mtd/nand/nand.c @@ -54,7 +54,7 @@ static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand, if (nand_scan(mtd, maxchips) == 0) { if (!mtd->name) mtd->name = (char *)default_nand_name; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC else mtd->name += gd->reloc_off; #endif diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c index a27d47e5f1..f70daefbfe 100644 --- a/drivers/mtd/nand/s3c2410_nand.c +++ b/drivers/mtd/nand/s3c2410_nand.c @@ -69,11 +69,11 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) chip->IO_ADDR_W = (void *)IO_ADDR_W; if (ctrl & NAND_NCE) - writel(readl(&nand->NFCONF) & ~S3C2410_NFCONF_nFCE, - &nand->NFCONF); + writel(readl(&nand->nfconf) & ~S3C2410_NFCONF_nFCE, + &nand->nfconf); else - writel(readl(&nand->NFCONF) | S3C2410_NFCONF_nFCE, - &nand->NFCONF); + writel(readl(&nand->nfconf) | S3C2410_NFCONF_nFCE, + &nand->nfconf); } if (cmd != NAND_CMD_NONE) @@ -84,7 +84,7 @@ static int s3c2410_dev_ready(struct mtd_info *mtd) { struct s3c2410_nand *nand = s3c2410_get_base_nand(); debugX(1, "dev_ready\n"); - return readl(&nand->NFSTAT) & 0x01; + return readl(&nand->nfstat) & 0x01; } #ifdef CONFIG_S3C2410_NAND_HWECC @@ -92,16 +92,16 @@ void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) { struct s3c2410_nand *nand = s3c2410_get_base_nand(); debugX(1, "s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode); - writel(readl(&nand->NFCONF) | S3C2410_NFCONF_INITECC, &nand->NFCONF); + writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC, &nand->nfconf); } static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { struct s3c2410_nand *nand = s3c2410_get_base_nand(); - ecc_code[0] = readb(&nand->NFECC); - ecc_code[1] = readb(&nand->NFECC + 1); - ecc_code[2] = readb(&nand->NFECC + 2); + ecc_code[0] = readb(&nand->nfecc); + ecc_code[1] = readb(&nand->nfecc + 1); + ecc_code[2] = readb(&nand->nfecc + 2); debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", mtd , ecc_code[0], ecc_code[1], ecc_code[2]); @@ -130,7 +130,7 @@ int board_nand_init(struct nand_chip *nand) debugX(1, "board_nand_init()\n"); - writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); /* initialize hardware */ twrph0 = 3; @@ -141,10 +141,11 @@ int board_nand_init(struct nand_chip *nand) cfg |= S3C2410_NFCONF_TACLS(tacls - 1); cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); - writel(cfg, &nand_reg->NFCONF); + writel(cfg, &nand_reg->nfconf); /* initialize nand_chip data structure */ - nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA; + nand->IO_ADDR_R = (void *)&nand_reg->nfdata; + nand->IO_ADDR_W = (void *)&nand_reg->nfdata; nand->select_chip = NULL; diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c index 1045cf1ba9..49a1f5fb49 100644 --- a/drivers/net/phy/miiphybb.c +++ b/drivers/net/phy/miiphybb.c @@ -127,7 +127,7 @@ void bb_miiphy_init(void) int i; for (i = 0; i < bb_miiphy_buses_num; i++) { -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* Relocate the hook pointers*/ BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off); BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off); diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c index 04de5ca545..7f02f0585f 100644 --- a/drivers/rtc/s3c24x0_rtc.c +++ b/drivers/rtc/s3c24x0_rtc.c @@ -49,11 +49,11 @@ static inline void SetRTC_Access(RTC_ACCESS a) switch (a) { case RTC_ENABLE: - writeb(readb(&rtc->RTCCON) | 0x01, &rtc->RTCCON); + writeb(readb(&rtc->rtccon) | 0x01, &rtc->rtccon); break; case RTC_DISABLE: - writeb(readb(&rtc->RTCCON) & ~0x01, &rtc->RTCCON); + writeb(readb(&rtc->rtccon) & ~0x01, &rtc->rtccon); break; } } @@ -71,23 +71,23 @@ int rtc_get(struct rtc_time *tmp) /* read RTC registers */ do { - sec = readb(&rtc->BCDSEC); - min = readb(&rtc->BCDMIN); - hour = readb(&rtc->BCDHOUR); - mday = readb(&rtc->BCDDATE); - wday = readb(&rtc->BCDDAY); - mon = readb(&rtc->BCDMON); - year = readb(&rtc->BCDYEAR); - } while (sec != readb(&rtc->BCDSEC)); + sec = readb(&rtc->bcdsec); + min = readb(&rtc->bcdmin); + hour = readb(&rtc->bcdhour); + mday = readb(&rtc->bcddate); + wday = readb(&rtc->bcdday); + mon = readb(&rtc->bcdmon); + year = readb(&rtc->bcdyear); + } while (sec != readb(&rtc->bcdsec)); /* read ALARM registers */ - a_sec = readb(&rtc->ALMSEC); - a_min = readb(&rtc->ALMMIN); - a_hour = readb(&rtc->ALMHOUR); - a_date = readb(&rtc->ALMDATE); - a_mon = readb(&rtc->ALMMON); - a_year = readb(&rtc->ALMYEAR); - a_armed = readb(&rtc->RTCALM); + a_sec = readb(&rtc->almsec); + a_min = readb(&rtc->almmin); + a_hour = readb(&rtc->almhour); + a_date = readb(&rtc->almdate); + a_mon = readb(&rtc->almmon); + a_year = readb(&rtc->almyear); + a_armed = readb(&rtc->rtcalm); /* disable access to RTC registers */ SetRTC_Access(RTC_DISABLE); @@ -145,13 +145,13 @@ int rtc_set(struct rtc_time *tmp) SetRTC_Access(RTC_ENABLE); /* write RTC registers */ - writeb(sec, &rtc->BCDSEC); - writeb(min, &rtc->BCDMIN); - writeb(hour, &rtc->BCDHOUR); - writeb(mday, &rtc->BCDDATE); - writeb(wday, &rtc->BCDDAY); - writeb(mon, &rtc->BCDMON); - writeb(year, &rtc->BCDYEAR); + writeb(sec, &rtc->bcdsec); + writeb(min, &rtc->bcdmin); + writeb(hour, &rtc->bcdhour); + writeb(mday, &rtc->bcddate); + writeb(wday, &rtc->bcdday); + writeb(mon, &rtc->bcdmon); + writeb(year, &rtc->bcdyear); /* disable access to RTC registers */ SetRTC_Access(RTC_DISABLE); @@ -163,8 +163,8 @@ void rtc_reset(void) { struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc(); - writeb((readb(&rtc->RTCCON) & ~0x06) | 0x08, &rtc->RTCCON); - writeb(readb(&rtc->RTCCON) & ~(0x08 | 0x01), &rtc->RTCCON); + writeb((readb(&rtc->rtccon) & ~0x06) | 0x08, &rtc->rtccon); + writeb(readb(&rtc->rtccon) & ~(0x08 | 0x01), &rtc->rtccon); } #endif diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index 8a3e30209c..f42b15e45e 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -101,7 +101,7 @@ void _serial_setbrg(const int dev_index) /* value is calculated so : (int)(PCLK/16./baudrate) -1 */ reg = get_PCLK() / (16 * gd->baudrate) - 1; - writel(reg, &uart->UBRDIV); + writel(reg, &uart->ubrdiv); for (i = 0; i < 100; i++) /* Delay */ ; } @@ -131,26 +131,26 @@ static int serial_init_dev(const int dev_index) #endif /* FIFO enable, Tx/Rx FIFO clear */ - writel(0x07, &uart->UFCON); - writel(0x0, &uart->UMCON); + writel(0x07, &uart->ufcon); + writel(0x0, &uart->umcon); /* Normal,No parity,1 stop,8 bit */ - writel(0x3, &uart->ULCON); + writel(0x3, &uart->ulcon); /* * tx=level,rx=edge,disable timeout int.,enable rx error int., * normal,interrupt or polling */ - writel(0x245, &uart->UCON); + writel(0x245, &uart->ucon); #ifdef CONFIG_HWFLOW - writel(0x1, &uart->UMCON); /* RTS up */ + writel(0x1, &uart->umcon); /* rts up */ #endif /* FIXME: This is sooooooooooooooooooo ugly */ #if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2) /* we need auto hw flow control on the gsm and gps port */ if (dev_index == 0 || dev_index == 1) - writel(0x10, &uart->UMCON); + writel(0x10, &uart->umcon); #endif _serial_setbrg(dev_index); @@ -176,10 +176,10 @@ int _serial_getc(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - while (!(readl(&uart->UTRSTAT) & 0x1)) + while (!(readl(&uart->utrstat) & 0x1)) /* wait for character to arrive */ ; - return readb(&uart->URXH) & 0xff; + return readb(&uart->urxh) & 0xff; } #if defined(CONFIG_SERIAL_MULTI) @@ -237,15 +237,15 @@ void _serial_putc(const char c, const int dev_index) return; #endif - while (!(readl(&uart->UTRSTAT) & 0x2)) + while (!(readl(&uart->utrstat) & 0x2)) /* wait for room in the tx FIFO */ ; #ifdef CONFIG_HWFLOW - while (hwflow && !(readl(&uart->UMSTAT) & 0x1)) + while (hwflow && !(readl(&uart->umstat) & 0x1)) /* Wait for CTS up */ ; #endif - writeb(c, &uart->UTXH); + writeb(c, &uart->utxh); /* If \n, also do \r */ if (c == '\n') @@ -272,7 +272,7 @@ int _serial_tstc(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - return readl(&uart->UTRSTAT) & 0x1; + return readl(&uart->utrstat) & 0x1; } #if defined(CONFIG_SERIAL_MULTI) diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 77096643f1..36333c3d49 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -70,7 +70,11 @@ void serial_setbrg_dev(const int dev_index) val = uclk / baudrate; writel(val / 16 - 1, &uart->ubrdiv); - writew(udivslot[val % 16], &uart->udivslot); + + if (use_divslot) + writew(udivslot[val % 16], &uart->rest.slot); + else + writeb(val % 16, &uart->rest.value); } /* diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index 3fc79909ea..1cc31a968d 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -121,7 +121,7 @@ static int __init compr_init(struct ubifs_compressor *compr) { ubifs_compressors[compr->compr_type] = compr; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC ubifs_compressors[compr->compr_type]->name += gd->reloc_off; ubifs_compressors[compr->compr_type]->capi_name += gd->reloc_off; ubifs_compressors[compr->compr_type]->decompress += gd->reloc_off; diff --git a/include/command.h b/include/command.h index 5c14616233..46a9ec4c4c 100644 --- a/include/command.h +++ b/include/command.h @@ -125,7 +125,7 @@ cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage} #endif /* CONFIG_SYS_LONGHELP */ -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) void fixup_cmdtable(cmd_tbl_t *cmdtp, int size); #endif #endif /* __COMMAND_H */ diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index 6d8780abb1..4a8acabf72 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9cd0bc645a..36a2a461d1 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -42,7 +42,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index cde5aede90..49c923f163 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index fb9d0a516d..15de310304 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 02401b8366..5e7dee5299 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -49,7 +49,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 05e12dd08c..401478b270 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 0905638f8b..f6cb40684f 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -43,7 +43,6 @@ #ifndef CONFIG_SYS_USE_BOOT_NORFLASH #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 67288d0e48..de74dcf18b 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 22054cf488..8dbd0825b5 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index ff4f306fff..a1976350e4 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -68,8 +68,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index a5231894db..23bfbeb1d7 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -29,7 +29,6 @@ #define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 5f40908b49..f31081dbf3 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -28,7 +28,6 @@ #ifdef CONFIG_CPUAT91_RAM #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#define CONFIG_SKIP_RELOCATE_UBOOT 1 #else #define CONFIG_BOOTDELAY 1 #endif diff --git a/include/configs/csb637.h b/include/configs/csb637.h index f92f3c7443..7a85d65302 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 906b8e76a7..1feada9263 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_TEXT_BASE 0xc1080000 /* diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index d4c3697e88..8a6905241c 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM355EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 4b1f02998c..c9530327c6 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -23,7 +23,6 @@ #define DAVINCI_DM355LEOPARD #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 04b60449ed..b78fe83867 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM365EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6b5d8656b6..f0a8e98c36 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM6467EVM #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* SoC Configuration */ #define CONFIG_ARM926EJS /* arm926ejs CPU */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index ec05abac49..186726d3a6 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -133,7 +133,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #endif #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_HW_ECC @@ -143,10 +142,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 409c5a464e..967ebcc98a 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -88,7 +88,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index c7e0e56d7f..4d866d0eb2 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -83,7 +83,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 3035f794d9..0dc89ef41e 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -122,7 +122,6 @@ #define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -131,10 +130,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 5c05e4df3c..69c6420fe9 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -32,7 +32,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 82e70f7b19..fd39ab4a03 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -39,7 +39,6 @@ * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem. */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT 1 /* * High Level Configuration Options diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index db4ec3d808..5023638070 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -146,7 +146,6 @@ #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#undef CONFIG_SYS_ARM_WITHOUT_RELOC #define CONFIG_SYS_SDRAM_BASE CSD0_BASE #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 4cbbf242bb..41b09aad9f 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -28,7 +28,6 @@ #define CONFIG_SA1110 1 /* This is an SA110 CPU */ #define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */ #define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_ARM_WITHOUT_RELOC 1 #define CONFIG_SYS_TEXT_BASE 0xC1F00000 diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index a2edaf9983..cfb7ceacc1 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -53,8 +53,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* undef this for direct boot from */ - /* NOR flash without preloader */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index a0fe32ec2c..17972d7e6f 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 41a953e905..a27b36b378 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 956603a2da..8e398d7205 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -73,8 +73,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 47e7c866c0..3b90a01623 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -47,7 +47,6 @@ #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/netstar.h b/include/configs/netstar.h index ee5a995e5e..f159013934 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -119,9 +119,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ -/*#define CONFIG_SKIP_LOWLEVEL_INIT */ - /* * Partitions (mtdparts command line support) */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index af0202cfbe..ca3bf26215 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index aee842fbb7..7fcc9babdc 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -152,7 +152,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 42ec855cc9..619af2d9bf 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -161,7 +161,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_USER_LOWLEVEL_INIT 1 /* diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 2fbe5c66a9..3ed6b56bfe 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 1ff35e3982..c1c7f80d4b 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -42,7 +42,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ #define CONFIG_SYS_TEXT_BASE 0x0 /* diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 47b8a55995..541aec05ff 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,8 +40,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: has 24MHz input clock at S5PC110 */ #define CONFIG_SYS_CLK_FREQ_C110 24000000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index cdbe7106e4..00f4dc9f7c 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -54,7 +54,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/shannon.h b/include/configs/shannon.h index e02d5e76bb..c0e6643fb4 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -34,7 +34,6 @@ */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f89fc3ef8f..671f2c7c8b 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,8 +40,6 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ -#define CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_PERIPORT_REMAP #define CONFIG_PERIPORT_BASE 0x70000000 #define CONFIG_PERIPORT_SIZE 0x13 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 6bea5b2e27..e36b262a8e 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -45,8 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: SMDKC100 has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 31a0bdf9f0..7b18022c6e 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -63,7 +63,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 1d971931b4..a5c116b347 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -190,18 +190,11 @@ #define CONFIG_SYS_SDRAM_BASE 0x90000000 #define CONFIG_SYS_INIT_RAM_ADDR 0x1FFE8000 -#ifndef CONFIG_SYS_ARM_WITHOUT_RELOC #define CONFIG_SYS_INIT_RAM_SIZE (64 * 1024) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) -#undef CONFIG_SKIP_RELOCATE_UBOOT -#else -#define CONFIG_SKIP_RELOCATE_UBOOT -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + 0x2000) -#endif - #define CONFIG_BOARD_EARLY_INIT_F /* 166 MHz DDR RAM */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index a8b88dae37..615d5c1f75 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 4ecef94514..1e03b0180d 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -45,7 +45,6 @@ #undef CONFIG_MMC #define BOARD_LATE_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ diff --git a/include/post.h b/include/post.h index abe47da53b..957ce3b161 100644 --- a/include/post.h +++ b/include/post.h @@ -137,7 +137,7 @@ void post_output_backlog ( void ); int post_run (char *name, int flags); int post_info (char *name); int post_log (char *format, ...); -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void post_reloc (void); #endif unsigned long post_time_ms (unsigned long base); diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index ccd0af2554..d6244183c8 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -221,7 +221,7 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs, return 0; } -#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +#if defined(CONFIG_ARM) void board_init_f (ulong bootflag) { relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index 21ed3fcff4..a3f0f6ba51 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -263,7 +263,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) return 0; } -#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +#if defined(CONFIG_ARM) void board_init_f (ulong bootflag) { relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, diff --git a/onenand_ipl/board/vpac270/Makefile b/onenand_ipl/board/vpac270/Makefile index a86bc00864..7300692b77 100644 --- a/onenand_ipl/board/vpac270/Makefile +++ b/onenand_ipl/board/vpac270/Makefile @@ -8,7 +8,6 @@ AFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL CFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL OBJCFLAGS += --gap-fill=0x00 -SOBJS := lowlevel_init.o SOBJS += start.o COBJS := vpac270.o COBJS += onenand_read.o @@ -62,10 +61,6 @@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)vpac270.c: @rm -f $@ ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/vpac270.c $@ - -$(obj)lowlevel_init.S: - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/lowlevel_init.S $@ endif ######################################################################### diff --git a/onenand_ipl/board/vpac270/lowlevel_init.S b/onenand_ipl/board/vpac270/lowlevel_init.S deleted file mode 100644 index e79d8dd1ab..0000000000 --- a/onenand_ipl/board/vpac270/lowlevel_init.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Voipac PXA270 Lowlevel Hardware Initialization - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/macro.h> - -.globl lowlevel_init -lowlevel_init: - pxa_clock_setup - mov pc, lr diff --git a/post/post.c b/post/post.c index 8a9fd0d2ec..1b7f2aa075 100644 --- a/post/post.c +++ b/post/post.c @@ -422,7 +422,7 @@ int post_log (char *format, ...) return 0; } -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void post_reloc (void) { unsigned int i; |