diff options
-rw-r--r-- | board/gen860t/fpga.c | 4 | ||||
-rw-r--r-- | drivers/fpga/virtex2.c | 34 | ||||
-rw-r--r-- | drivers/fpga/xilinx.c | 14 | ||||
-rw-r--r-- | include/virtex2.h | 34 | ||||
-rw-r--r-- | include/xilinx.h | 2 |
5 files changed, 44 insertions, 44 deletions
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c index b7984dd0fe..48a4222ac4 100644 --- a/board/gen860t/fpga.c +++ b/board/gen860t/fpga.c @@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR; /* Note that these are pointers to code that is in Flash. They will be * relocated at runtime. */ -Xilinx_Virtex2_Slave_SelectMap_fns fpga_fns = { +xilinx_virtex2_slave_selectmap_fns fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_init_fn, @@ -57,7 +57,7 @@ Xilinx_Virtex2_Slave_SelectMap_fns fpga_fns = { }; Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { - {Xilinx_Virtex2, + {xilinx_virtex2, slave_selectmap, XILINX_XC2V3000_SIZE, (void *) &fpga_fns, diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index b5a895d41a..1cd9046a24 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -84,25 +84,25 @@ #define CONFIG_SYS_FPGA_WAIT_CONFIG CONFIG_SYS_HZ/5 /* 200 ms */ #endif -static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize) +int virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__); - ret_val = Virtex2_ss_load (desc, buf, bsize); + ret_val = virtex2_ss_load(desc, buf, bsize); break; case slave_selectmap: PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__); - ret_val = Virtex2_ssm_load (desc, buf, bsize); + ret_val = virtex2_ssm_load(desc, buf, bsize); break; default: @@ -112,19 +112,19 @@ int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +int virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__); - ret_val = Virtex2_ss_dump (desc, buf, bsize); + ret_val = virtex2_ss_dump(desc, buf, bsize); break; case slave_parallel: PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__); - ret_val = Virtex2_ssm_dump (desc, buf, bsize); + ret_val = virtex2_ssm_dump(desc, buf, bsize); break; default: @@ -134,7 +134,7 @@ int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Virtex2_info (Xilinx_desc * desc) +int virtex2_info(Xilinx_desc *desc) { return FPGA_SUCCESS; } @@ -153,10 +153,10 @@ int Virtex2_info (Xilinx_desc * desc) * INIT_B and DONE lines. If both are high, configuration has * succeeded. Congratulations! */ -static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; - Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns; + xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; PRINTF ("%s:%d: Start with interface functions @ 0x%p\n", __FUNCTION__, __LINE__, fn); @@ -352,10 +352,10 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* * Read the FPGA configuration data */ -static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; - Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns; + xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; if (fn) { unsigned char *data = (unsigned char *) buf; @@ -404,13 +404,13 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) { printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__); return FPGA_FAIL; } -static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) { printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__); return FPGA_FAIL; diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index 7d93d641f6..6953535f08 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -169,11 +169,11 @@ int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize) __FUNCTION__); #endif break; - case Xilinx_Virtex2: + case xilinx_virtex2: #if defined(CONFIG_FPGA_VIRTEX2) PRINTF ("%s: Launching the Virtex-II Loader...\n", __FUNCTION__); - ret_val = Virtex2_load (desc, buf, bsize); + ret_val = virtex2_load(desc, buf, bsize); #else printf ("%s: No support for Virtex-II devices.\n", __FUNCTION__); @@ -226,11 +226,11 @@ int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize) __FUNCTION__); #endif break; - case Xilinx_Virtex2: + case xilinx_virtex2: #if defined( CONFIG_FPGA_VIRTEX2) PRINTF ("%s: Launching the Virtex-II Reader...\n", __FUNCTION__); - ret_val = Virtex2_dump (desc, buf, bsize); + ret_val = virtex2_dump(desc, buf, bsize); #else printf ("%s: No support for Virtex-II devices.\n", __FUNCTION__); @@ -268,7 +268,7 @@ int xilinx_info (Xilinx_desc * desc) case xilinx_spartan3: printf ("Spartan-III\n"); break; - case Xilinx_Virtex2: + case xilinx_virtex2: printf ("Virtex-II\n"); break; case xilinx_zynq: @@ -334,9 +334,9 @@ int xilinx_info (Xilinx_desc * desc) __FUNCTION__); #endif break; - case Xilinx_Virtex2: + case xilinx_virtex2: #if defined(CONFIG_FPGA_VIRTEX2) - Virtex2_info (desc); + virtex2_info(desc); #else /* just in case */ printf ("%s: No support for Virtex-II devices.\n", diff --git a/include/virtex2.h b/include/virtex2.h index 2e9a4f52da..1e6624ca96 100644 --- a/include/virtex2.h +++ b/include/virtex2.h @@ -11,9 +11,9 @@ #include <xilinx.h> -extern int Virtex2_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Virtex2_info(Xilinx_desc *desc); +int virtex2_load(Xilinx_desc *desc, const void *image, size_t size); +int virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +int virtex2_info(Xilinx_desc *desc); /* * Slave SelectMap Implementation function table. @@ -32,7 +32,7 @@ typedef struct { Xilinx_busy_fn busy; Xilinx_abort_fn abort; Xilinx_post_fn post; -} Xilinx_Virtex2_Slave_SelectMap_fns; +} xilinx_virtex2_slave_selectmap_fns; /* Slave Serial Implementation function table */ typedef struct { @@ -40,7 +40,7 @@ typedef struct { Xilinx_clk_fn clk; Xilinx_rdata_fn rdata; Xilinx_wdata_fn wdata; -} Xilinx_Virtex2_Slave_Serial_fns; +} xilinx_virtex2_slave_serial_fns; /* Device Image Sizes (in bytes) *********************************************************************/ @@ -60,39 +60,39 @@ typedef struct { /* Descriptor Macros *********************************************************************/ #define XILINX_XC2V40_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie } #define XILINX_XC2V80_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie } #define XILINX_XC2V250_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie } #define XILINX_XC2V500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie } #define XILINX_XC2V1000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie } #define XILINX_XC2V1500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie } #define XILINX_XC2V2000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie } #define XILINX_XC2V3000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie } #define XILINX_XC2V4000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie } #define XILINX_XC2V6000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie } #define XILINX_XC2V8000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie } #define XILINX_XC2V10000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie } #endif /* _VIRTEX2_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index 365c0c358e..fa89fb6835 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -28,7 +28,7 @@ typedef enum { /* typedef Xilinx_Family */ min_xilinx_type, /* low range check value */ xilinx_spartan2, /* Spartan-II Family */ Xilinx_VirtexE, /* Virtex-E Family */ - Xilinx_Virtex2, /* Virtex2 Family */ + xilinx_virtex2, /* Virtex2 Family */ xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ max_xilinx_type /* insert all new types before this */ |