summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.travis.yml15
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon16
-rw-r--r--arch/arm/cpu/armv8/sec_firmware.c2
-rwxr-xr-xboard/sunxi/mksunxi_fit_atf.sh16
-rw-r--r--common/image-fit.c16
-rw-r--r--common/image-sig.c2
-rw-r--r--doc/README.uniphier36
-rw-r--r--doc/chromium/chromebook_jerry.its16
-rw-r--r--doc/chromium/nyan-big.its16
-rw-r--r--doc/uImage.FIT/beaglebone_vboot.txt84
-rw-r--r--doc/uImage.FIT/command_syntax_extensions.txt42
-rw-r--r--doc/uImage.FIT/howto.txt52
-rw-r--r--doc/uImage.FIT/kernel.its28
-rw-r--r--doc/uImage.FIT/kernel_fdt.its20
-rw-r--r--doc/uImage.FIT/multi-with-fpga.its28
-rw-r--r--doc/uImage.FIT/multi-with-loadables.its40
-rw-r--r--doc/uImage.FIT/multi.its54
-rw-r--r--doc/uImage.FIT/multi_spl.its14
-rw-r--r--doc/uImage.FIT/overlay-fdt-boot.txt78
-rw-r--r--doc/uImage.FIT/sign-configs.its18
-rw-r--r--doc/uImage.FIT/sign-images.its16
-rw-r--r--doc/uImage.FIT/signature.txt100
-rw-r--r--doc/uImage.FIT/source_file_format.txt26
-rw-r--r--doc/uImage.FIT/update3.its12
-rw-r--r--doc/uImage.FIT/update_uboot.its4
-rw-r--r--doc/uImage.FIT/x86-fit-boot.txt10
-rw-r--r--include/image.h26
-rwxr-xr-xtest/run15
-rw-r--r--tools/binman/README4
-rw-r--r--tools/dtoc/fdt_util.py3
-rw-r--r--tools/fit_image.c24
-rw-r--r--tools/image-host.c10
32 files changed, 439 insertions, 404 deletions
diff --git a/.travis.yml b/.travis.yml
index a53e7c6f7b..5e251314db 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -118,6 +118,20 @@ script:
./test/py/test.py --bd ${TEST_PY_BD} ${TEST_PY_ID}
-k "${TEST_PY_TEST_SPEC:-not a_test_which_does_not_exist}"
--build-dir "$UBOOT_TRAVIS_BUILD_DIR";
+ ret=$?;
+ if [[ $ret -ne 0 ]]; then
+ exit $ret;
+ fi;
+ fi;
+ if [[ -n "${TEST_PY_TOOLS}" ]]; then
+ PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
+ PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
+ ./tools/binman/binman -t &&
+ ./tools/patman/patman --test &&
+ ./tools/buildman/buildman -t &&
+ PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
+ PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
+ ./tools/dtoc/dtoc -t;
fi
matrix:
@@ -295,6 +309,7 @@ matrix:
TEST_PY_TEST_SPEC="test_ofplatdata"
BUILDMAN="^sandbox$"
TOOLCHAIN="x86_64"
+ TEST_PY_TOOLS="yes"
- env:
- TEST_PY_BD="sandbox_flattree"
BUILDMAN="^sandbox_flattree$"
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
index 2505f408ab..a00b5bc9c3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
@@ -86,7 +86,7 @@ Example:
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "ARM64 Linux kernel";
data = /incbin/("./arch/arm64/boot/Image.gz");
type = "kernel";
@@ -96,7 +96,7 @@ Example:
load = <0x80080000>;
entry = <0x80080000>;
};
- fdt@1 {
+ fdt-1 {
description = "Flattened Device Tree blob";
data = /incbin/("./fsl-ls1043ardb-static.dtb");
type = "flat_dt";
@@ -104,7 +104,7 @@ Example:
compression = "none";
load = <0x90000000>;
};
- ramdisk@1 {
+ ramdisk {
description = "LS1043 Ramdisk";
data = /incbin/("./rootfs.cpio.gz");
type = "ramdisk";
@@ -116,12 +116,12 @@ Example:
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
- fdt = "fdt@1";
- ramdisk = "ramdisk@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
+ ramdisk = "ramdisk";
loadables = "fdt", "ramdisk";
};
};
diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c
index 927eae4f74..b56ea785c5 100644
--- a/arch/arm/cpu/armv8/sec_firmware.c
+++ b/arch/arm/cpu/armv8/sec_firmware.c
@@ -30,7 +30,7 @@ phys_addr_t sec_firmware_addr;
#define SEC_FIRMWARE_FIT_IMAGE "firmware"
#endif
#ifndef SEC_FIRMEWARE_FIT_CNF_NAME
-#define SEC_FIRMEWARE_FIT_CNF_NAME "config@1"
+#define SEC_FIRMEWARE_FIT_CNF_NAME "config-1"
#endif
#ifndef SEC_FIRMWARE_TARGET_EL
#define SEC_FIRMWARE_TARGET_EL 2
diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh
index b1d6e0e16a..36abe9efed 100755
--- a/board/sunxi/mksunxi_fit_atf.sh
+++ b/board/sunxi/mksunxi_fit_atf.sh
@@ -21,7 +21,7 @@ cat << __HEADER_EOF
#address-cells = <1>;
images {
- uboot@1 {
+ uboot {
description = "U-Boot (64-bit)";
data = /incbin/("u-boot-nodtb.bin");
type = "standalone";
@@ -29,7 +29,7 @@ cat << __HEADER_EOF
compression = "none";
load = <0x4a000000>;
};
- atf@1 {
+ atf {
description = "ARM Trusted Firmware";
data = /incbin/("$BL31");
type = "firmware";
@@ -44,7 +44,7 @@ cnt=1
for dtname in $*
do
cat << __FDT_IMAGE_EOF
- fdt@$cnt {
+ fdt_$cnt {
description = "$(basename $dtname .dtb)";
data = /incbin/("$dtname");
type = "flat_dt";
@@ -57,7 +57,7 @@ done
cat << __CONF_HEADER_EOF
};
configurations {
- default = "config@1";
+ default = "config_1";
__CONF_HEADER_EOF
@@ -65,11 +65,11 @@ cnt=1
for dtname in $*
do
cat << __CONF_SECTION_EOF
- config@$cnt {
+ config_$cnt {
description = "$(basename $dtname .dtb)";
- firmware = "uboot@1";
- loadables = "atf@1";
- fdt = "fdt@$cnt";
+ firmware = "uboot";
+ loadables = "atf";
+ fdt = "fdt_$cnt";
};
__CONF_SECTION_EOF
cnt=$((cnt+1))
diff --git a/common/image-fit.c b/common/image-fit.c
index b785d8a36e..f6e956ad96 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -330,7 +330,7 @@ static void fit_image_print_verification_data(const void *fit, int noffset,
/*
* Check subnode name, must be equal to "hash" or "signature".
* Multiple hash/signature nodes require unique unit node
- * names, e.g. hash@1, hash@2, signature@1, signature@2, etc.
+ * names, e.g. hash-1, hash-2, signature-1, signature-2, etc.
*/
name = fit_get_name(fit, noffset, NULL);
if (!strncmp(name, FIT_HASH_NODENAME, strlen(FIT_HASH_NODENAME))) {
@@ -1111,7 +1111,7 @@ int fit_image_verify(const void *fit, int image_noffset)
/*
* Check subnode name, must be equal to "hash".
* Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, etc.
+ * names, e.g. hash-1, hash-2, etc.
*/
if (!strncmp(name, FIT_HASH_NODENAME,
strlen(FIT_HASH_NODENAME))) {
@@ -1348,15 +1348,15 @@ int fit_check_format(const void *fit)
*
* / o image-tree
* |-o images
- * | |-o fdt@1
- * | |-o fdt@2
+ * | |-o fdt-1
+ * | |-o fdt-2
* |
* |-o configurations
- * |-o config@1
- * | |-fdt = fdt@1
+ * |-o config-1
+ * | |-fdt = fdt-1
* |
- * |-o config@2
- * |-fdt = fdt@2
+ * |-o config-2
+ * |-fdt = fdt-2
*
* / o U-Boot fdt
* |-compatible = "foo,bar", "bim,bam"
diff --git a/common/image-sig.c b/common/image-sig.c
index bf824fef3c..d9f712fc1e 100644
--- a/common/image-sig.c
+++ b/common/image-sig.c
@@ -347,7 +347,7 @@ int fit_config_check_sig(const void *fit, int noffset, int required_keynode,
/*
* Each node can generate one region for each sub-node. Allow for
- * 7 sub-nodes (hash@1, signature@1, etc.) and some extra.
+ * 7 sub-nodes (hash-1, signature-1, etc.) and some extra.
*/
max_regions = 20 + count * 7;
struct fdt_region fdt_regions[max_regions];
diff --git a/doc/README.uniphier b/doc/README.uniphier
index 0fa3248fae..990806ab79 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -142,7 +142,7 @@ The following is an example for a simple usecase:
#address-cells = <1>;
images {
- kernel@0 {
+ kernel {
description = "linux";
data = /incbin/("PATH/TO/YOUR/LINUX/DIR/arch/arm64/boot/Image.gz");
type = "kernel";
@@ -151,44 +151,44 @@ The following is an example for a simple usecase:
compression = "gzip";
load = <0x82080000>;
entry = <0x82080000>;
- hash@0 {
+ hash-1 {
algo = "sha256";
};
};
- fdt@0 {
+ fdt-1 {
description = "fdt";
data = /incbin/("PATH/TO/YOUR/LINUX/DIR/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dtb");
type = "flat_dt";
arch = "arm64";
compression = "none";
- hash@0 {
+ hash-1 {
algo = "sha256";
};
};
- ramdisk@0 {
+ ramdisk {
description = "ramdisk";
data = /incbin/("PATH/TO/YOUR/ROOTFS/DIR/rootfs.cpio");
type = "ramdisk";
arch = "arm64";
os = "linux";
compression = "none";
- hash@0 {
+ hash-1 {
algo = "sha256";
};
};
};
configurations {
- default = "config@0";
+ default = "config-1";
- config@0 {
+ config-1 {
description = "Configuration0";
- kernel = "kernel@0";
- fdt = "fdt@0";
- ramdisk = "ramdisk@0";
- signature@0 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ ramdisk = "ramdisk";
+ signature-1 {
algo = "sha256,rsa2048";
key-name-hint = "dev";
sign-images = "kernel", "fdt", "ramdisk";
@@ -268,9 +268,9 @@ If it is successful, you will see messages like follows:
---------------------------------------->8----------------------------------------
## Loading kernel from FIT Image at 84100000 ...
- Using 'config@0' configuration
+ Using 'config-1' configuration
Verifying Hash Integrity ... sha256,rsa2048:dev+ OK
- Trying 'kernel@0' kernel subimage
+ Trying 'kernel' kernel subimage
Description: linux
Created: 2017-10-20 14:32:29 UTC
Type: Kernel Image
@@ -285,8 +285,8 @@ If it is successful, you will see messages like follows:
Hash value: 82a37b7f11ae55f4e07aa25bf77e4067cb9dc1014d52d6cd4d588f92eee3aaad
Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 84100000 ...
- Using 'config@0' configuration
- Trying 'ramdisk@0' ramdisk subimage
+ Using 'config-1' configuration
+ Trying 'ramdisk' ramdisk subimage
Description: ramdisk
Created: 2017-10-20 14:32:29 UTC
Type: RAMDisk Image
@@ -301,8 +301,8 @@ If it is successful, you will see messages like follows:
Hash value: 44980a2874154a2e31ed59222c9f8ea968867637f35c81e4107a984de7014deb
Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 84100000 ...
- Using 'config@0' configuration
- Trying 'fdt@0' fdt subimage
+ Using 'config-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: fdt
Created: 2017-10-20 14:32:29 UTC
Type: Flat Device Tree
diff --git a/doc/chromium/chromebook_jerry.its b/doc/chromium/chromebook_jerry.its
index 8cff840e00..7505a20535 100644
--- a/doc/chromium/chromebook_jerry.its
+++ b/doc/chromium/chromebook_jerry.its
@@ -5,7 +5,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "U-Boot mainline";
type = "kernel_noload";
arch = "arm";
@@ -14,29 +14,29 @@
compression = "none";
load = <0>;
entry = <0>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1{
+ fdt-1{
description = "rk3288-veryron-jerry.dtb";
data = /incbin/("../../b/chromebook_jerry/u-boot.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
- hash@1{
+ hash-1{
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot U-Boot";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
diff --git a/doc/chromium/nyan-big.its b/doc/chromium/nyan-big.its
index 8dc8d73041..37d4e10949 100644
--- a/doc/chromium/nyan-big.its
+++ b/doc/chromium/nyan-big.its
@@ -5,7 +5,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "U-Boot mainline";
type = "kernel_noload";
arch = "arm";
@@ -14,29 +14,29 @@
compression = "none";
load = <0>;
entry = <0>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1{
+ fdt-1{
description = "tegra124-nyan-big.dtb";
data = /incbin/("../.././b/nyan-big/u-boot.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
- hash@1{
+ hash-1{
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot U-Boot";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
diff --git a/doc/uImage.FIT/beaglebone_vboot.txt b/doc/uImage.FIT/beaglebone_vboot.txt
index b4ab28542e..f1862c2753 100644
--- a/doc/uImage.FIT/beaglebone_vboot.txt
+++ b/doc/uImage.FIT/beaglebone_vboot.txt
@@ -130,7 +130,7 @@ Put this into a file in that directory called sign.its:
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("Image.lzo");
type = "kernel";
arch = "arm";
@@ -138,27 +138,27 @@ Put this into a file in that directory called sign.its:
compression = "lzo";
load = <0x80008000>;
entry = <0x80008000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "beaglebone-black";
data = /incbin/("am335x-boneblack.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ signature-1 {
algo = "sha1,rsa2048";
key-name-hint = "dev";
sign-images = "fdt", "kernel";
@@ -211,7 +211,7 @@ You should see something like this:
FIT description: Beaglebone black
Created: Sun Jun 1 12:50:30 2014
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: unavailable
Created: Sun Jun 1 12:50:30 2014
Type: Kernel Image
@@ -223,7 +223,7 @@ Created: Sun Jun 1 12:50:30 2014
Entry Point: 0x80008000
Hash algo: sha1
Hash value: c94364646427e10f423837e559898ef02c97b988
- Image 1 (fdt@1)
+ Image 1 (fdt-1)
Description: beaglebone-black
Created: Sun Jun 1 12:50:30 2014
Type: Flat Device Tree
@@ -232,11 +232,11 @@ Created: Sun Jun 1 12:50:30 2014
Architecture: ARM
Hash algo: sha1
Hash value: cb09202f889d824f23b8e4404b781be5ad38a68d
- Default Configuration: 'conf@1'
- Configuration 0 (conf@1)
+ Default Configuration: 'conf-1'
+ Configuration 0 (conf-1)
Description: unavailable
- Kernel: kernel@1
- FDT: fdt@1
+ Kernel: kernel
+ FDT: fdt-1
Now am335x-boneblack-pubkey.dtb contains the public key and image.fit contains
@@ -251,12 +251,12 @@ which results in:
Verifying Hash Integrity ... sha1,rsa2048:dev+
## Loading kernel from FIT Image at 7fc6ee469000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Verifying Hash Integrity ...
sha1,rsa2048:dev+
OK
- Trying 'kernel@1' kernel subimage
+ Trying 'kernel' kernel subimage
Description: unavailable
Created: Sun Jun 1 12:50:30 2014
Type: Kernel Image
@@ -274,8 +274,8 @@ OK
Unimplemented compression type 4
## Loading fdt from FIT Image at 7fc6ee469000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: beaglebone-black
Created: Sun Jun 1 12:50:30 2014
Type: Flat Device Tree
@@ -291,7 +291,7 @@ OK
Loading Flat Device Tree ... OK
## Loading ramdisk from FIT Image at 7fc6ee469000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Could not find subimage node
Signature check OK
@@ -313,8 +313,8 @@ the above flow works.
But it is fun to do this by hand, so you can load image.fit into a hex editor
like ghex, and change a byte in the kernel:
- $UOUT/tools/fit_info -f image.fit -n /images/kernel@1 -p data
-NAME: kernel@1
+ $UOUT/tools/fit_info -f image.fit -n /images/kernel -p data
+NAME: kernel
LEN: 7790938
OFF: 168
@@ -324,12 +324,12 @@ fit_check_sign again. You should see something like:
Verifying Hash Integrity ... sha1,rsa2048:dev+
## Loading kernel from FIT Image at 7f5a39571000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Verifying Hash Integrity ...
sha1,rsa2048:dev+
OK
- Trying 'kernel@1' kernel subimage
+ Trying 'kernel' kernel subimage
Description: unavailable
Created: Sun Jun 1 13:09:21 2014
Type: Kernel Image
@@ -343,12 +343,12 @@ OK
Hash value: c94364646427e10f423837e559898ef02c97b988
Verifying Hash Integrity ...
sha1 error
-Bad hash value for 'hash@1' hash node in 'kernel@1' image node
+Bad hash value for 'hash-1' hash node in 'kernel' image node
Bad Data Hash
## Loading fdt from FIT Image at 7f5a39571000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: beaglebone-black
Created: Sun Jun 1 13:09:21 2014
Type: Flat Device Tree
@@ -364,7 +364,7 @@ OK
Loading Flat Device Tree ... OK
## Loading ramdisk from FIT Image at 7f5a39571000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Could not find subimage node
Signature check Bad (error 1)
@@ -386,11 +386,11 @@ images
configurations
fdtget -l image.fit /configurations
-conf@1
-fdtget -l image.fit /configurations/conf@1
-signature@1
+conf-1
+fdtget -l image.fit /configurations/conf-1
+signature-1
- fdtget -p image.fit /configurations/conf@1/signature@1
+ fdtget -p image.fit /configurations/conf-1/signature-1
hashed-strings
hashed-nodes
timestamp
@@ -401,20 +401,20 @@ algo
key-name-hint
sign-images
- fdtget image.fit /configurations/conf@1/signature@1 hashed-nodes
-/ /configurations/conf@1 /images/fdt@1 /images/fdt@1/hash@1 /images/kernel@1 /images/kernel@1/hash@1
+ fdtget image.fit /configurations/conf-1/signature-1 hashed-nodes
+/ /configurations/conf-1 /images/fdt-1 /images/fdt-1/hash /images/kernel /images/kernel/hash-1
This gives us a bit of a look into the signature that mkimage added. Note you
can also use fdtdump to list the entire device tree.
Say we want to change the kernel that this configuration uses
-(/images/kernel@1). We could just put a new kernel in the image, but we will
+(/images/kernel). We could just put a new kernel in the image, but we will
need to change the hash to match. Let's simulate that by changing a byte of
the hash:
- fdtget -tx image.fit /images/kernel@1/hash@1 value
+ fdtget -tx image.fit /images/kernel/hash-1 value
c9436464 6427e10f 423837e5 59898ef0 2c97b988
- fdtput -tx image.fit /images/kernel@1/hash@1 value c9436464 6427e10f 423837e5 59898ef0 2c97b981
+ fdtput -tx image.fit /images/kernel/hash-1 value c9436464 6427e10f 423837e5 59898ef0 2c97b981
Now check it again:
@@ -437,7 +437,7 @@ configuration. But that won't work since you are not allowed to change the
configuration in any way. Try it with a fresh (valid) image if you like by
running the mkimage link again. Then:
- fdtput -p image.fit /configurations/conf@1/signature@2 value fred
+ fdtput -p image.fit /configurations/conf-1/signature-1 value fred
$UOUT/tools/fit_check_sign -f image.fit -k am335x-boneblack-pubkey.dtb
Verifying Hash Integrity ... -
sha1,rsa2048:devrsa_verify_with_keynode: RSA failed to verify: -13
@@ -521,9 +521,9 @@ U-Boot# ext2load mmc 0:2 82000000 /boot/image.fit
7824930 bytes read in 589 ms (12.7 MiB/s)
U-Boot# bootm 82000000
## Loading kernel from FIT Image at 82000000 ...
- Using 'conf@1' configuration
+ Using 'conf-1' configuration
Verifying Hash Integrity ... sha1,rsa2048:dev+ OK
- Trying 'kernel@1' kernel subimage
+ Trying 'kernel' kernel subimage
Description: unavailable
Created: 2014-06-01 19:32:54 UTC
Type: Kernel Image
@@ -538,8 +538,8 @@ U-Boot# bootm 82000000
Hash value: c94364646427e10f423837e559898ef02c97b988
Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 82000000 ...
- Using 'conf@1' configuration
- Trying 'fdt@1' fdt subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' fdt subimage
Description: beaglebone-black
Created: 2014-06-01 19:32:54 UTC
Type: Flat Device Tree
diff --git a/doc/uImage.FIT/command_syntax_extensions.txt b/doc/uImage.FIT/command_syntax_extensions.txt
index 676f992f90..6a99089ab5 100644
--- a/doc/uImage.FIT/command_syntax_extensions.txt
+++ b/doc/uImage.FIT/command_syntax_extensions.txt
@@ -138,31 +138,31 @@ unit.
Examples:
-- boot kernel "kernel@1" stored in a new uImage located at 200000:
-bootm 200000:kernel@1
+- boot kernel "kernel-1" stored in a new uImage located at 200000:
+bootm 200000:kernel-1
-- boot configuration "cfg@1" from a new uImage located at 200000:
-bootm 200000#cfg@1
+- boot configuration "cfg-1" from a new uImage located at 200000:
+bootm 200000#cfg-1
-- boot configuration "cfg@1" with extra "cfg@2" from a new uImage located
+- boot configuration "cfg-1" with extra "cfg-2" from a new uImage located
at 200000:
-bootm 200000#cfg@1#cfg@2
+bootm 200000#cfg-1#cfg-2
-- boot "kernel@1" from a new uImage at 200000 with initrd "ramdisk@2" found in
+- boot "kernel-1" from a new uImage at 200000 with initrd "ramdisk-2" found in
some other new uImage stored at address 800000:
-bootm 200000:kernel@1 800000:ramdisk@2
+bootm 200000:kernel-1 800000:ramdisk-2
-- boot "kernel@2" from a new uImage at 200000, with initrd "ramdisk@1" and FDT
- "fdt@1", both stored in some other new uImage located at 800000:
-bootm 200000:kernel@1 800000:ramdisk@1 800000:fdt@1
+- boot "kernel-2" from a new uImage at 200000, with initrd "ramdisk-1" and FDT
+ "fdt-1", both stored in some other new uImage located at 800000:
+bootm 200000:kernel-1 800000:ramdisk-1 800000:fdt-1
-- boot kernel "kernel@2" with initrd "ramdisk@2", both stored in a new uImage
+- boot kernel "kernel-2" with initrd "ramdisk-2", both stored in a new uImage
at address 200000, with a raw FDT blob stored at address 600000:
-bootm 200000:kernel@2 200000:ramdisk@2 600000
+bootm 200000:kernel-2 200000:ramdisk-2 600000
-- boot kernel "kernel@2" from new uImage at 200000 with FDT "fdt@1" from the
+- boot kernel "kernel-2" from new uImage at 200000 with FDT "fdt-1" from the
same new uImage:
-bootm 200000:kernel@2 - 200000:fdt@1
+bootm 200000:kernel-2 - 200000:fdt-1
Note on current image address
@@ -186,16 +186,16 @@ current image address is to be used. For example, consider the following
commands:
tftp 200000 /tftpboot/uImage
-bootm :kernel@1
+bootm :kernel-1
Last command is equivalent to:
-bootm 200000:kernel@1
+bootm 200000:kernel-1
tftp 200000 /tftpboot/uImage
-bootm 400000:kernel@1 :ramdisk@1
+bootm 400000:kernel-1 :ramdisk-1
Last command is equivalent to:
-bootm 400000:kernel@1 400000:ramdisk@1
+bootm 400000:kernel-1 400000:ramdisk-1
tftp 200000 /tftpboot/uImage
-bootm :kernel@1 400000:ramdisk@1 :fdt@1
+bootm :kernel-1 400000:ramdisk-1 :fdt-1
Last command is equivalent to:
-bootm 200000:kernel@1 400000:ramdisk@1 400000:fdt@1
+bootm 200000:kernel-1 400000:ramdisk-1 400000:fdt-1
diff --git a/doc/uImage.FIT/howto.txt b/doc/uImage.FIT/howto.txt
index 2988a52aa1..8592719685 100644
--- a/doc/uImage.FIT/howto.txt
+++ b/doc/uImage.FIT/howto.txt
@@ -86,7 +86,7 @@ $
$ mkimage -l kernel.itb
FIT description: Simple image with single Linux kernel
Created: Tue Mar 11 17:26:15 2008
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
@@ -99,10 +99,10 @@ Created: Tue Mar 11 17:26:15 2008
Hash value: 2ae2bb40
Hash algo: sha1
Hash value: 3c200f34e2c226ddc789240cca0c59fc54a67cf4
- Default Configuration: 'config@1'
- Configuration 0 (config@1)
+ Default Configuration: 'config-1'
+ Configuration 0 (config-1)
Description: Boot Linux kernel
- Kernel: kernel@1
+ Kernel: kernel
The resulting image file kernel.itb can be now transferred to the target,
@@ -130,7 +130,7 @@ Bytes transferred = 944464 (e6950 hex)
FIT image found
FIT description: Simple image with single Linux kernel
Created: 2008-03-11 16:26:15 UTC
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
@@ -144,15 +144,15 @@ Bytes transferred = 944464 (e6950 hex)
Hash value: 2ae2bb40
Hash algo: sha1
Hash value: 3c200f34e2c226ddc789240cca0c59fc54a67cf4
- Default Configuration: 'config@1'
- Configuration 0 (config@1)
+ Default Configuration: 'config-1'
+ Configuration 0 (config-1)
Description: Boot Linux kernel
- Kernel: kernel@1
+ Kernel: kernel
=> bootm
## Booting kernel from FIT Image at 00900000 ...
- Using 'config@1' configuration
- Trying 'kernel@1' kernel subimage
+ Using 'config-1' configuration
+ Trying 'kernel' kernel subimage
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
@@ -196,7 +196,7 @@ $
$ mkimage -l kernel_fdt.itb
FIT description: Simple image with single Linux kernel and FDT blob
Created: Tue Mar 11 16:29:22 2008
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
@@ -209,7 +209,7 @@ Created: Tue Mar 11 16:29:22 2008
Hash value: 2c0cc807
Hash algo: sha1
Hash value: 264b59935470e42c418744f83935d44cdf59a3bb
- Image 1 (fdt@1)
+ Image 1 (fdt-1)
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
@@ -219,11 +219,11 @@ Created: Tue Mar 11 16:29:22 2008
Hash value: 0d655d71
Hash algo: sha1
Hash value: 25ab4e15cd4b8a5144610394560d9c318ce52def
- Default Configuration: 'conf@1'
- Configuration 0 (conf@1)
+ Default Configuration: 'conf-1'
+ Configuration 0 (conf-1)
Description: Boot Linux kernel with FDT blob
- Kernel: kernel@1
- FDT: fdt@1
+ Kernel: kernel
+ FDT: fdt-1
The resulting image file kernel_fdt.itb can be now transferred to the target,
@@ -245,7 +245,7 @@ Bytes transferred = 1109776 (10ef10 hex)
FIT image found
FIT description: Simple image with single Linux kernel and FDT blob
Created: 2008-03-11 15:29:22 UTC
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
@@ -259,7 +259,7 @@ Bytes transferred = 1109776 (10ef10 hex)
Hash value: 2c0cc807
Hash algo: sha1
Hash value: 264b59935470e42c418744f83935d44cdf59a3bb
- Image 1 (fdt@1)
+ Image 1 (fdt-1)
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
@@ -270,15 +270,15 @@ Bytes transferred = 1109776 (10ef10 hex)
Hash value: 0d655d71
Hash algo: sha1
Hash value: 25ab4e15cd4b8a5144610394560d9c318ce52def
- Default Configuration: 'conf@1'
- Configuration 0 (conf@1)
+ Default Configuration: 'conf-1'
+ Configuration 0 (conf-1)
Description: Boot Linux kernel with FDT blob
- Kernel: kernel@1
- FDT: fdt@1
+ Kernel: kernel
+ FDT: fdt-1
=> bootm
## Booting kernel from FIT Image at 00900000 ...
- Using 'conf@1' configuration
- Trying 'kernel@1' kernel subimage
+ Using 'conf-1' configuration
+ Trying 'kernel' kernel subimage
Description: Vanilla Linux kernel
Type: Kernel Image
Compression: gzip compressed
@@ -295,8 +295,8 @@ Bytes transferred = 1109776 (10ef10 hex)
Verifying Hash Integrity ... crc32+ sha1+ OK
Uncompressing Kernel Image ... OK
## Flattened Device Tree from FIT Image at 00900000
- Using 'conf@1' configuration
- Trying 'fdt@1' FDT blob subimage
+ Using 'conf-1' configuration
+ Trying 'fdt-1' FDT blob subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its
index 0aaf47e6c6..77ddf622de 100644
--- a/doc/uImage.FIT/kernel.its
+++ b/doc/uImage.FIT/kernel.its
@@ -9,7 +9,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
@@ -18,20 +18,20 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
+ kernel = "kernel";
};
};
};
@@ -47,7 +47,7 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./image.bin.lzo");
type = "kernel";
@@ -56,12 +56,12 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
compression = "lzo";
load = <0x01000000>;
entry = <0x00000000>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- setup@1 {
+ setup {
description = "Linux setup.bin";
data = /incbin/("./setup.bin");
type = "x86_setup";
@@ -70,18 +70,18 @@ For x86 a setup node is also required: see x86-fit-boot.txt.
compression = "none";
load = <0x00090000>;
entry = <0x00090000>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
- setup = "setup@1";
+ kernel = "kernel";
+ setup = "setup";
};
};
};
diff --git a/doc/uImage.FIT/kernel_fdt.its b/doc/uImage.FIT/kernel_fdt.its
index 7c521486ef..000d85b8e0 100644
--- a/doc/uImage.FIT/kernel_fdt.its
+++ b/doc/uImage.FIT/kernel_fdt.its
@@ -9,7 +9,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
@@ -18,34 +18,34 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "Flattened Device Tree blob";
data = /incbin/("./target.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
+ default = "conf-1";
+ conf-1 {
description = "Boot Linux kernel with FDT blob";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
diff --git a/doc/uImage.FIT/multi-with-fpga.its b/doc/uImage.FIT/multi-with-fpga.its
index 0cdb31fe91..47ee5760c4 100644
--- a/doc/uImage.FIT/multi-with-fpga.its
+++ b/doc/uImage.FIT/multi-with-fpga.its
@@ -10,31 +10,31 @@
#address-cells = <1>;
images {
- fdt@1 {
+ fdt-1 {
description = "zc706";
data = /incbin/("/tftpboot/devicetree.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0x10000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fpga@1 {
+ fpga {
description = "FPGA";
data = /incbin/("/tftpboot/download.bit");
type = "fpga";
arch = "arm";
compression = "none";
load = <0x30000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- linux_kernel@1 {
+ linux_kernel {
description = "Linux";
data = /incbin/("/tftpboot/zImage");
type = "kernel";
@@ -43,25 +43,25 @@
compression = "none";
load = <0x8000>;
entry = <0x8000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
};
configurations {
- default = "config@2";
- config@1 {
+ default = "config-2";
+ config-1 {
description = "Linux";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "Linux with fpga";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
- fpga = "fpga@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
+ fpga = "fpga";
};
};
};
diff --git a/doc/uImage.FIT/multi-with-loadables.its b/doc/uImage.FIT/multi-with-loadables.its
index a8545d245c..4d4909f832 100644
--- a/doc/uImage.FIT/multi-with-loadables.its
+++ b/doc/uImage.FIT/multi-with-loadables.its
@@ -10,7 +10,7 @@
#address-cells = <1>;
images {
- xen_kernel@1 {
+ xen_kernel {
description = "xen binary";
data = /incbin/("./xen");
type = "kernel";
@@ -19,36 +19,36 @@
compression = "none";
load = <0xa0000000>;
entry = <0xa0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fdt@1 {
+ fdt-1 {
description = "xexpress-ca15 tree blob";
data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0xb0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fdt@2 {
+ fdt-2 {
description = "xexpress-ca15 tree blob";
data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0xb0400000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- linux_kernel@1 {
+ linux_kernel {
description = "Linux Image";
data = /incbin/("./Image");
type = "kernel";
@@ -57,33 +57,33 @@
compression = "none";
load = <0xa0000000>;
entry = <0xa0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
};
configurations {
- default = "config@2";
+ default = "config-2";
- config@1 {
+ config-1 {
description = "Just plain Linux";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "Xen one loadable";
- kernel = "xen_kernel@1";
- fdt = "fdt@1";
- loadables = "linux_kernel@1";
+ kernel = "xen_kernel";
+ fdt = "fdt-1";
+ loadables = "linux_kernel";
};
- config@3 {
+ config-3 {
description = "Xen two loadables";
- kernel = "xen_kernel@1";
- fdt = "fdt@1";
- loadables = "linux_kernel@1", "fdt@2";
+ kernel = "xen_kernel";
+ fdt = "fdt-1";
+ loadables = "linux_kernel", "fdt-2";
};
};
};
diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its
index 37369ecc82..26c8dad6a2 100644
--- a/doc/uImage.FIT/multi.its
+++ b/doc/uImage.FIT/multi.its
@@ -9,7 +9,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel-1 {
description = "vanilla-2.6.23";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
@@ -18,15 +18,15 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- kernel@2 {
+ kernel-2 {
description = "2.6.23-denx";
data = /incbin/("./2.6.23-denx.bin.gz");
type = "kernel";
@@ -35,12 +35,12 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- kernel@3 {
+ kernel-3 {
description = "2.4.25-denx";
data = /incbin/("./2.4.25-denx.bin.gz");
type = "kernel";
@@ -49,12 +49,12 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- ramdisk@1 {
+ ramdisk-1 {
description = "eldk-4.2-ramdisk";
data = /incbin/("./eldk-4.2-ramdisk");
type = "ramdisk";
@@ -63,12 +63,12 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- ramdisk@2 {
+ ramdisk-2 {
description = "eldk-3.1-ramdisk";
data = /incbin/("./eldk-3.1-ramdisk");
type = "ramdisk";
@@ -77,30 +77,30 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
};
- fdt@1 {
+ fdt-1 {
description = "tqm5200-fdt";
data = /incbin/("./tqm5200.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "crc32";
};
};
- fdt@2 {
+ fdt-2 {
description = "tqm5200s-fdt";
data = /incbin/("./tqm5200s.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
load = <00700000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
@@ -108,26 +108,26 @@
};
configurations {
- default = "config@1";
+ default = "config-1";
- config@1 {
+ config-1 {
description = "tqm5200 vanilla-2.6.23 configuration";
- kernel = "kernel@1";
- ramdisk = "ramdisk@1";
- fdt = "fdt@1";
+ kernel = "kernel-1";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "tqm5200s denx-2.6.23 configuration";
- kernel = "kernel@2";
- ramdisk = "ramdisk@1";
- fdt = "fdt@2";
+ kernel = "kernel-2";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-2";
};
- config@3 {
+ config-3 {
description = "tqm5200s denx-2.4.25 configuration";
- kernel = "kernel@3";
- ramdisk = "ramdisk@2";
+ kernel = "kernel-3";
+ ramdisk = "ramdisk-2";
};
};
};
diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its
index d43563d87a..5942199744 100644
--- a/doc/uImage.FIT/multi_spl.its
+++ b/doc/uImage.FIT/multi_spl.its
@@ -45,7 +45,7 @@
load = <0x40000>;
};
- fdt@1 {
+ fdt-1 {
description = "Pine64+ DT";
type = "flat_dt";
compression = "none";
@@ -53,7 +53,7 @@
arch = "arm64";
};
- fdt@2 {
+ fdt-2 {
description = "Pine64 DT";
type = "flat_dt";
compression = "none";
@@ -79,18 +79,18 @@
};
configurations {
- default = "config@1";
+ default = "config-1";
- config@1 {
+ config-1 {
description = "sun50i-a64-pine64-plus";
loadables = "uboot", "atf", "kernel", "initrd";
- fdt = "fdt@1";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "sun50i-a64-pine64";
loadables = "uboot", "atf", "mgmt-firmware";
- fdt = "fdt@2";
+ fdt = "fdt-2";
};
};
};
diff --git a/doc/uImage.FIT/overlay-fdt-boot.txt b/doc/uImage.FIT/overlay-fdt-boot.txt
index 63e47da2a9..dddc4db1a6 100644
--- a/doc/uImage.FIT/overlay-fdt-boot.txt
+++ b/doc/uImage.FIT/overlay-fdt-boot.txt
@@ -24,7 +24,7 @@ Without using overlays the configuration would be as follows for every case.
/dts-v1/;
/ {
images {
- kernel@1 {
+ kernel {
data = /incbin/("./zImage");
type = "kernel";
arch = "arm";
@@ -32,32 +32,32 @@ Without using overlays the configuration would be as follows for every case.
load = <0x82000000>;
entry = <0x82000000>;
};
- fdt@1 {
+ fdt-1 {
data = /incbin/("./foo-reva.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@2 {
+ fdt-2 {
data = /incbin/("./foo-revb.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@3 {
+ fdt-3 {
data = /incbin/("./foo-reva-bar.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@4 {
+ fdt-4 {
data = /incbin/("./foo-revb-bar.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@5 {
+ fdt-5 {
data = /incbin/("./foo-revb-baz.dtb");
type = "flat_dt";
arch = "arm";
};
- fdt@6 {
+ fdt-6 {
data = /incbin/("./foo-revb-bar-baz.dtb");
type = "flat_dt";
arch = "arm";
@@ -67,28 +67,28 @@ Without using overlays the configuration would be as follows for every case.
configurations {
default = "foo-reva.dtb;
foo-reva.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
foo-revb.dtb {
- kernel = "kernel@1";
- fdt = "fdt@2";
+ kernel = "kernel";
+ fdt = "fdt-2";
};
foo-reva-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@3";
+ kernel = "kernel";
+ fdt = "fdt-3";
};
foo-revb-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@4";
+ kernel = "kernel";
+ fdt = "fdt-4";
};
foo-revb-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@5";
+ kernel = "kernel";
+ fdt = "fdt-5";
};
foo-revb-bar-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@6";
+ kernel = "kernel";
+ fdt = "fdt-6";
};
};
};
@@ -117,7 +117,7 @@ explosion problem.
/dts-v1/;
/ {
images {
- kernel@1 {
+ kernel {
data = /incbin/("./zImage");
type = "kernel";
arch = "arm";
@@ -125,31 +125,31 @@ explosion problem.
load = <0x82000000>;
entry = <0x82000000>;
};
- fdt@1 {
+ fdt-1 {
data = /incbin/("./foo.dtb");
type = "flat_dt";
arch = "arm";
load = <0x87f00000>;
};
- fdt@2 {
+ fdt-2 {
data = /incbin/("./reva.dtbo");
type = "flat_dt";
arch = "arm";
load = <0x87fc0000>;
};
- fdt@3 {
+ fdt-3 {
data = /incbin/("./revb.dtbo");
type = "flat_dt";
arch = "arm";
load = <0x87fc0000>;
};
- fdt@4 {
+ fdt-4 {
data = /incbin/("./bar.dtbo");
type = "flat_dt";
arch = "arm";
load = <0x87fc0000>;
};
- fdt@5 {
+ fdt-5 {
data = /incbin/("./baz.dtbo");
type = "flat_dt";
arch = "arm";
@@ -160,34 +160,34 @@ explosion problem.
configurations {
default = "foo-reva.dtb;
foo-reva.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@2";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-2";
};
foo-revb.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3";
};
foo-reva-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@2", "fdt@4";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-2", "fdt-4";
};
foo-revb-bar.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3", "fdt@4";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3", "fdt-4";
};
foo-revb-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3", "fdt@5";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3", "fdt-5";
};
foo-revb-bar-baz.dtb {
- kernel = "kernel@1";
- fdt = "fdt@1", "fdt@3", "fdt@4", "fdt@5";
+ kernel = "kernel";
+ fdt = "fdt-1", "fdt-3", "fdt-4", "fdt-5";
};
bar {
- fdt = "fdt@4";
+ fdt = "fdt-4";
};
baz {
- fdt = "fdt@5";
+ fdt = "fdt-5";
};
};
};
diff --git a/doc/uImage.FIT/sign-configs.its b/doc/uImage.FIT/sign-configs.its
index 3c17f040de..9e992c1988 100644
--- a/doc/uImage.FIT/sign-configs.its
+++ b/doc/uImage.FIT/sign-configs.its
@@ -5,7 +5,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("test-kernel.bin");
type = "kernel_noload";
arch = "sandbox";
@@ -14,28 +14,28 @@
load = <0x4>;
entry = <0x8>;
kernel-version = <1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "snow";
data = /incbin/("sandbox-kernel.dtb");
type = "flat_dt";
arch = "sandbox";
compression = "none";
fdt-version = <1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
sign-images = "fdt", "kernel";
diff --git a/doc/uImage.FIT/sign-images.its b/doc/uImage.FIT/sign-images.its
index f69326a39b..18c759e9e6 100644
--- a/doc/uImage.FIT/sign-images.its
+++ b/doc/uImage.FIT/sign-images.its
@@ -5,7 +5,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("test-kernel.bin");
type = "kernel_noload";
arch = "sandbox";
@@ -14,29 +14,29 @@
load = <0x4>;
entry = <0x8>;
kernel-version = <1>;
- signature@1 {
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
};
};
- fdt@1 {
+ fdt-1 {
description = "snow";
data = /incbin/("sandbox-kernel.dtb");
type = "flat_dt";
arch = "sandbox";
compression = "none";
fdt-version = <1>;
- signature@1 {
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
diff --git a/doc/uImage.FIT/signature.txt b/doc/uImage.FIT/signature.txt
index 2ece4c47de..a765722679 100644
--- a/doc/uImage.FIT/signature.txt
+++ b/doc/uImage.FIT/signature.txt
@@ -83,7 +83,7 @@ Device Tree Bindings
The following properties are required in the FIT's signature node(s) to
allow the signer to operate. These should be added to the .its file.
Signature nodes sit at the same level as hash nodes and are called
-signature@1, signature@2, etc.
+signature-1, signature-2, etc.
- algo: Algorithm name (e.g. "sha1,rsa2048")
@@ -118,9 +118,9 @@ For config bindings, these properties are added by the signer:
- hashed-nodes: A list of nodes which were hashed by the signer. Each is
a string - the full path to node. A typical value might be:
- hashed-nodes = "/", "/configurations/conf@1", "/images/kernel@1",
- "/images/kernel@1/hash@1", "/images/fdt@1",
- "/images/fdt@1/hash@1";
+ hashed-nodes = "/", "/configurations/conf-1", "/images/kernel",
+ "/images/kernel/hash-1", "/images/fdt-1",
+ "/images/fdt-1/hash-1";
- hashed-strings: The start and size of the string region of the FIT that
was hashed
@@ -178,44 +178,44 @@ As an example, consider this FIT:
/ {
images {
- kernel@1 {
+ kernel-1 {
data = <data for kernel1>
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
value = <...kernel signature 1...>
};
};
- kernel@2 {
+ kernel-2 {
data = <data for kernel2>
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
value = <...kernel signature 2...>
};
};
- fdt@1 {
+ fdt-1 {
data = <data for fdt1>;
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
vaue = <...fdt signature 1...>
};
};
- fdt@2 {
+ fdt-2 {
data = <data for fdt2>;
- signature@1 {
+ signature-1 {
algo = "sha1,rsa2048";
vaue = <...fdt signature 2...>
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel-1";
+ fdt = "fdt-1";
};
- conf@1 {
- kernel = "kernel@2";
- fdt = "fdt@2";
+ conf-1 {
+ kernel = "kernel-2";
+ fdt = "fdt-2";
};
};
};
@@ -224,18 +224,18 @@ Since both kernels are signed it is easy for an attacker to add a new
configuration 3 with kernel 1 and fdt 2:
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel-1";
+ fdt = "fdt-1";
};
- conf@1 {
- kernel = "kernel@2";
- fdt = "fdt@2";
+ conf-1 {
+ kernel = "kernel-2";
+ fdt = "fdt-2";
};
- conf@3 {
- kernel = "kernel@1";
- fdt = "fdt@2";
+ conf-3 {
+ kernel = "kernel-1";
+ fdt = "fdt-2";
};
};
@@ -250,49 +250,49 @@ So the above example is adjusted to look like this:
/ {
images {
- kernel@1 {
+ kernel-1 {
data = <data for kernel1>
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...kernel hash 1...>
};
};
- kernel@2 {
+ kernel-2 {
data = <data for kernel2>
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...kernel hash 2...>
};
};
- fdt@1 {
+ fdt-1 {
data = <data for fdt1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...fdt hash 1...>
};
};
- fdt@2 {
+ fdt-2 {
data = <data for fdt2>;
- hash@1 {
+ hash-1 {
algo = "sha1";
value = <...fdt hash 2...>
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel-1";
+ fdt = "fdt-1";
+ signature-1 {
algo = "sha1,rsa2048";
value = <...conf 1 signature...>;
};
};
- conf@2 {
- kernel = "kernel@2";
- fdt = "fdt@2";
- signature@1 {
+ conf-2 {
+ kernel = "kernel-2";
+ fdt = "fdt-2";
+ signature-1 {
algo = "sha1,rsa2048";
value = <...conf 1 signature...>;
};
@@ -303,11 +303,11 @@ So the above example is adjusted to look like this:
You can see that we have added hashes for all images (since they are no
longer signed), and a signature to each configuration. In the above example,
-mkimage will sign configurations/conf@1, the kernel and fdt that are
-pointed to by the configuration (/images/kernel@1, /images/kernel@1/hash@1,
-/images/fdt@1, /images/fdt@1/hash@1) and the root structure of the image
+mkimage will sign configurations/conf-1, the kernel and fdt that are
+pointed to by the configuration (/images/kernel-1, /images/kernel-1/hash-1,
+/images/fdt-1, /images/fdt-1/hash-1) and the root structure of the image
(so that it isn't possible to add or remove root nodes). The signature is
-written into /configurations/conf@1/signature@1/value. It can easily be
+written into /configurations/conf-1/signature-1/value. It can easily be
verified later even if the FIT has been signed with other keys in the
meantime.
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
index 88663a161d..d2793a195d 100644
--- a/doc/uImage.FIT/source_file_format.txt
+++ b/doc/uImage.FIT/source_file_format.txt
@@ -102,15 +102,15 @@ Root node of the uImage Tree should have the following layout:
|
o images
| |
- | o image@1 {...}
- | o image@2 {...}
+ | o image-1 {...}
+ | o image-2 {...}
| ...
|
o configurations
- |- default = "conf@1"
+ |- default = "conf-1"
|
- o conf@1 {...}
- o conf@2 {...}
+ o conf-1 {...}
+ o conf-2 {...}
...
@@ -142,7 +142,7 @@ Root node of the uImage Tree should have the following layout:
This node is a container node for component sub-image nodes. Each sub-node of
the '/images' node should have the following layout:
- o image@1
+ o image-1
|- description = "component sub-image description"
|- data = /incbin/("path/to/data/file.bin")
|- type = "sub-image type name"
@@ -152,8 +152,8 @@ the '/images' node should have the following layout:
|- load = <00000000>
|- entry = <00000000>
|
- o hash@1 {...}
- o hash@2 {...}
+ o hash-1 {...}
+ o hash-2 {...}
...
Mandatory properties:
@@ -183,14 +183,14 @@ the '/images' node should have the following layout:
property of the root node. Mandatory for types: "standalone" and "kernel".
Optional nodes:
- - hash@1 : Each hash sub-node represents separate hash or checksum
+ - hash-1 : Each hash sub-node represents separate hash or checksum
calculated for node's data according to specified algorithm.
5) Hash nodes
-------------
-o hash@1
+o hash-1
|- algo = "hash or checksum algorithm name"
|- value = [hash or checksum value]
@@ -212,8 +212,8 @@ The 'configurations' node has has the following structure:
o configurations
|- default = "default configuration sub-node unit name"
|
- o config@1 {...}
- o config@2 {...}
+ o config-1 {...}
+ o config-2 {...}
...
@@ -231,7 +231,7 @@ o configurations
Each configuration has the following structure:
-o config@1
+o config-1
|- description = "configuration description"
|- kernel = "kernel sub-node unit name"
|- ramdisk = "ramdisk sub-node unit name"
diff --git a/doc/uImage.FIT/update3.its b/doc/uImage.FIT/update3.its
index a6eaef691e..0659f20002 100644
--- a/doc/uImage.FIT/update3.its
+++ b/doc/uImage.FIT/update3.its
@@ -9,34 +9,34 @@
#address-cells = <1>;
images {
- update@1 {
+ update-1 {
description = "Linux kernel binary";
data = /incbin/("./vmlinux.bin.gz");
compression = "none";
type = "firmware";
load = <FF700000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- update@2 {
+ update-2 {
description = "Ramdisk image";
data = /incbin/("./ramdisk_image.gz");
compression = "none";
type = "firmware";
load = <FF8E0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- update@3 {
+ update-3 {
description = "FDT blob";
data = /incbin/("./blob.fdt");
compression = "none";
type = "firmware";
load = <FFAC0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
diff --git a/doc/uImage.FIT/update_uboot.its b/doc/uImage.FIT/update_uboot.its
index 846723e2d6..c2ac2663e6 100644
--- a/doc/uImage.FIT/update_uboot.its
+++ b/doc/uImage.FIT/update_uboot.its
@@ -10,13 +10,13 @@
#address-cells = <1>;
images {
- update@1 {
+ update-1 {
description = "U-Boot binary";
data = /incbin/("./u-boot.bin");
compression = "none";
type = "firmware";
load = <FFFC0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
diff --git a/doc/uImage.FIT/x86-fit-boot.txt b/doc/uImage.FIT/x86-fit-boot.txt
index 02238f9df8..88d3460a83 100644
--- a/doc/uImage.FIT/x86-fit-boot.txt
+++ b/doc/uImage.FIT/x86-fit-boot.txt
@@ -197,7 +197,7 @@ You can take a look at the resulting fit file if you like:
$ dumpimage -l image.fit
FIT description: Simple image with single Linux kernel on x86
Created: Tue Oct 7 10:57:24 2014
- Image 0 (kernel@1)
+ Image 0 (kernel)
Description: Vanilla Linux kernel
Created: Tue Oct 7 10:57:24 2014
Type: Kernel Image
@@ -209,7 +209,7 @@ Created: Tue Oct 7 10:57:24 2014
Entry Point: 0x00000000
Hash algo: sha1
Hash value: 446b5163ebfe0fb6ee20cbb7a8501b263cd92392
- Image 1 (setup@1)
+ Image 1 (setup)
Description: Linux setup.bin
Created: Tue Oct 7 10:57:24 2014
Type: x86 setup.bin
@@ -217,10 +217,10 @@ Created: Tue Oct 7 10:57:24 2014
Data Size: 12912 Bytes = 12.61 kB = 0.01 MB
Hash algo: sha1
Hash value: a1f2099cf47ff9816236cd534c77af86e713faad
- Default Configuration: 'config@1'
- Configuration 0 (config@1)
+ Default Configuration: 'config-1'
+ Configuration 0 (config-1)
Description: Boot Linux kernel
- Kernel: kernel@1
+ Kernel: kernel
Booting the FIT
diff --git a/include/image.h b/include/image.h
index a41a8369c6..b2b23a96f1 100644
--- a/include/image.h
+++ b/include/image.h
@@ -578,7 +578,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
* boot_get_loadable() will take the given FIT configuration, and look
* for a field named "loadables". Loadables, is a list of elements in
* the FIT given as strings. exe:
- * loadables = "linux_kernel@1", "fdt@2";
+ * loadables = "linux_kernel", "fdt-2";
* this function will attempt to parse each string, and load the
* corresponding element from the FIT into memory. Once placed,
* no aditional actions are taken.
@@ -604,10 +604,10 @@ int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
* @param images Boot images structure
* @param addr Address of FIT in memory
* @param fit_unamep On entry this is the requested image name
- * (e.g. "kernel@1") or NULL to use the default. On exit
+ * (e.g. "kernel") or NULL to use the default. On exit
* points to the selected image name
* @param fit_uname_configp On entry this is the requested configuration
- * name (e.g. "conf@1") or NULL to use the default. On
+ * name (e.g. "conf-1") or NULL to use the default. On
* exit points to the selected configuration name.
* @param arch Expected architecture (IH_ARCH_...)
* @param datap Returns address of loaded image
@@ -632,10 +632,10 @@ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr,
* @param images Boot images structure
* @param addr Address of FIT in memory
* @param fit_unamep On entry this is the requested image name
- * (e.g. "kernel@1") or NULL to use the default. On exit
+ * (e.g. "kernel") or NULL to use the default. On exit
* points to the selected image name
* @param fit_uname_configp On entry this is the requested configuration
- * name (e.g. "conf@1") or NULL to use the default. On
+ * name (e.g. "conf-1") or NULL to use the default. On
* exit points to the selected configuration name.
* @param arch Expected architecture (IH_ARCH_...)
* @param image_type Required image type (IH_TYPE_...). If this is
@@ -658,25 +658,25 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
/**
* fit_get_node_from_config() - Look up an image a FIT by type
*
- * This looks in the selected conf@ node (images->fit_uname_cfg) for a
+ * This looks in the selected conf- node (images->fit_uname_cfg) for a
* particular image type (e.g. "kernel") and then finds the image that is
* referred to.
*
* For example, for something like:
*
* images {
- * kernel@1 {
+ * kernel {
* ...
* };
* };
* configurations {
- * conf@1 {
- * kernel = "kernel@1";
+ * conf-1 {
+ * kernel = "kernel";
* };
* };
*
* the function will return the node offset of the kernel@1 node, assuming
- * that conf@1 is the chosen configuration.
+ * that conf-1 is the chosen configuration.
*
* @param images Boot images structure
* @param prop_name Property name to look up (FIT_..._PROP)
@@ -1022,10 +1022,10 @@ int fit_conf_get_node(const void *fit, const char *conf_uname);
* @noffset: Offset of conf@xxx node to check
* @prop_name: Property to read from the conf node
*
- * The conf@ nodes contain references to other nodes, using properties
- * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
+ * The conf- nodes contain references to other nodes, using properties
+ * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"),
* return the offset of the node referred to (e.g. offset of node
- * "/images/kernel@1".
+ * "/images/kernel".
*/
int fit_conf_get_prop_node(const void *fit, int noffset,
const char *prop_name);
diff --git a/test/run b/test/run
index 56160977a3..b2d24e3f8e 100755
--- a/test/run
+++ b/test/run
@@ -17,6 +17,21 @@ run_test ./test/py/test.py --bd sandbox_spl --build -k \
# Run tests for the flat DT version of sandbox
./test/py/test.py --bd sandbox_flattree --build
+DTC_DIR=build-sandbox_spl/scripts/dtc
+
+PYTHONPATH=${DTC_DIR}/pylibfdt DTC=${DTC_DIR}/dtc run_test \
+ ./tools/binman/binman -t
+run_test ./tools/patman/patman --test
+run_test ./tools/buildman/buildman -t
+PYTHONPATH=${DTC_DIR}/pylibfdt DTC=${DTC_DIR}/dtc run_test ./tools/dtoc/dtoc -t
+
+# This needs you to set up Python test coverage tools.
+# To enable Python test coverage on Debian-type distributions (e.g. Ubuntu):
+# $ sudo apt-get install python-pip python-pytest
+# $ sudo pip install coverage
+PYTHONPATH=${DTC_DIR}/pylibfdt DTC=${DTC_DIR}/dtc run_test \
+ ./tools/binman/binman -T
+
if [ $result == 0 ]; then
echo "Tests passed!"
else
diff --git a/tools/binman/README b/tools/binman/README
index 08c3e56bde..7f558ec6a9 100644
--- a/tools/binman/README
+++ b/tools/binman/README
@@ -536,6 +536,10 @@ entry contents.
Most of the time such essoteric behaviour is not needed, but it can be
essential for complex images.
+If you need to specify a particular device-tree compiler to use, you can define
+the DTC environment variable. This can be useful when the system dtc is too
+old.
+
History / Credits
-----------------
diff --git a/tools/dtoc/fdt_util.py b/tools/dtoc/fdt_util.py
index ba0b6cc381..ad06245b42 100644
--- a/tools/dtoc/fdt_util.py
+++ b/tools/dtoc/fdt_util.py
@@ -79,7 +79,8 @@ def EnsureCompiled(fname):
'-W', 'no-unit_address_vs_reg']
args.extend(search_list)
args.append(dts_input)
- command.Run('dtc', *args)
+ dtc = os.environ.get('DTC') or 'dtc'
+ command.Run(dtc, *args)
return dtb_output
def GetInt(node, propname, default=None):
diff --git a/tools/fit_image.c b/tools/fit_image.c
index 6dcc88bae0..1db44f47a1 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -185,7 +185,7 @@ static void get_basename(char *str, int size, const char *fname)
* fit_write_images() - Write out a list of images to the FIT
*
* We always include the main image (params->datafile). If there are device
- * tree files, we include an fdt@ node for each of those too.
+ * tree files, we include an fdt- node for each of those too.
*/
static int fit_write_images(struct image_tool_params *params, char *fdt)
{
@@ -199,7 +199,7 @@ static int fit_write_images(struct image_tool_params *params, char *fdt)
/* First the main image */
typename = genimg_get_type_short_name(params->fit_image_type);
- snprintf(str, sizeof(str), "%s@1", typename);
+ snprintf(str, sizeof(str), "%s-1", typename);
fdt_begin_node(fdt, str);
fdt_property_string(fdt, "description", params->imagename);
fdt_property_string(fdt, "type", typename);
@@ -225,7 +225,7 @@ static int fit_write_images(struct image_tool_params *params, char *fdt)
for (cont = params->content_head; cont; cont = cont->next) {
if (cont->type != IH_TYPE_FLATDT)
continue;
- snprintf(str, sizeof(str), "%s@%d", FIT_FDT_PROP, ++upto);
+ snprintf(str, sizeof(str), "%s-%d", FIT_FDT_PROP, ++upto);
fdt_begin_node(fdt, str);
get_basename(str, sizeof(str), cont->fname);
@@ -243,7 +243,7 @@ static int fit_write_images(struct image_tool_params *params, char *fdt)
/* And a ramdisk file if available */
if (params->fit_ramdisk) {
- fdt_begin_node(fdt, FIT_RAMDISK_PROP "@1");
+ fdt_begin_node(fdt, FIT_RAMDISK_PROP "-1");
fdt_property_string(fdt, "type", FIT_RAMDISK_PROP);
fdt_property_string(fdt, "os", genimg_get_os_short_name(params->os));
@@ -277,41 +277,41 @@ static void fit_write_configs(struct image_tool_params *params, char *fdt)
int upto;
fdt_begin_node(fdt, "configurations");
- fdt_property_string(fdt, "default", "conf@1");
+ fdt_property_string(fdt, "default", "conf-1");
upto = 0;
for (cont = params->content_head; cont; cont = cont->next) {
if (cont->type != IH_TYPE_FLATDT)
continue;
typename = genimg_get_type_short_name(cont->type);
- snprintf(str, sizeof(str), "conf@%d", ++upto);
+ snprintf(str, sizeof(str), "conf-%d", ++upto);
fdt_begin_node(fdt, str);
get_basename(str, sizeof(str), cont->fname);
fdt_property_string(fdt, "description", str);
typename = genimg_get_type_short_name(params->fit_image_type);
- snprintf(str, sizeof(str), "%s@1", typename);
+ snprintf(str, sizeof(str), "%s-1", typename);
fdt_property_string(fdt, typename, str);
if (params->fit_ramdisk)
fdt_property_string(fdt, FIT_RAMDISK_PROP,
- FIT_RAMDISK_PROP "@1");
+ FIT_RAMDISK_PROP "-1");
- snprintf(str, sizeof(str), FIT_FDT_PROP "@%d", upto);
+ snprintf(str, sizeof(str), FIT_FDT_PROP "-%d", upto);
fdt_property_string(fdt, FIT_FDT_PROP, str);
fdt_end_node(fdt);
}
if (!upto) {
- fdt_begin_node(fdt, "conf@1");
+ fdt_begin_node(fdt, "conf-1");
typename = genimg_get_type_short_name(params->fit_image_type);
- snprintf(str, sizeof(str), "%s@1", typename);
+ snprintf(str, sizeof(str), "%s-1", typename);
fdt_property_string(fdt, typename, str);
if (params->fit_ramdisk)
fdt_property_string(fdt, FIT_RAMDISK_PROP,
- FIT_RAMDISK_PROP "@1");
+ FIT_RAMDISK_PROP "-1");
fdt_end_node(fdt);
}
diff --git a/tools/image-host.c b/tools/image-host.c
index 2c0030b5e2..8a7469e538 100644
--- a/tools/image-host.c
+++ b/tools/image-host.c
@@ -270,16 +270,16 @@ static int fit_image_process_sig(const char *keydir, void *keydest,
*
* Input component image node structure:
*
- * o image@1 (at image_noffset)
+ * o image-1 (at image_noffset)
* | - data = [binary data]
- * o hash@1
+ * o hash-1
* |- algo = "sha1"
*
* Output component image node structure:
*
- * o image@1 (at image_noffset)
+ * o image-1 (at image_noffset)
* | - data = [binary data]
- * o hash@1
+ * o hash-1
* |- algo = "sha1"
* |- value = sha1(data)
*
@@ -321,7 +321,7 @@ int fit_image_add_verification_data(const char *keydir, void *keydest,
/*
* Check subnode name, must be equal to "hash" or "signature".
* Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, signature@1, etc.
+ * names, e.g. hash-1, hash-2, signature-1, etc.
*/
node_name = fit_get_name(fit, noffset, NULL);
if (!strncmp(node_name, FIT_HASH_NODENAME,