diff options
-rw-r--r-- | board/cds/common/ft_board.c | 23 | ||||
-rw-r--r-- | board/dbau1x00/u-boot.lds | 14 | ||||
-rw-r--r-- | board/gth2/u-boot.lds | 14 | ||||
-rw-r--r-- | board/incaip/u-boot.lds | 14 | ||||
-rw-r--r-- | board/pb1x00/u-boot.lds | 14 | ||||
-rw-r--r-- | board/purple/u-boot.lds | 14 | ||||
-rw-r--r-- | board/tb0229/u-boot.lds | 14 | ||||
-rw-r--r-- | board/tqm5200/cmd_stk52xx.c | 17 | ||||
-rw-r--r-- | board/tqm5200/tqm5200.c | 2 | ||||
-rw-r--r-- | board/tqm8xx/tqm8xx.c | 16 | ||||
-rw-r--r-- | cpu/mips/config.mk | 2 | ||||
-rw-r--r-- | cpu/mips/start.S | 19 | ||||
-rw-r--r-- | cpu/mpc85xx/cpu.c | 7 | ||||
-rw-r--r-- | cpu/mpc85xx/start.S | 24 | ||||
-rw-r--r-- | drivers/tsec.c | 1 | ||||
-rw-r--r-- | examples/mips.lds | 14 | ||||
-rw-r--r-- | include/asm-mips/addrspace.h | 2 | ||||
-rw-r--r-- | include/configs/MPC8266ADS.h | 2 | ||||
-rw-r--r-- | include/configs/MPC8541CDS.h | 1 | ||||
-rw-r--r-- | include/configs/MPC8548CDS.h | 1 | ||||
-rw-r--r-- | include/configs/MPC8555CDS.h | 1 | ||||
-rw-r--r-- | include/configs/MPC8568MDS.h | 2 | ||||
-rw-r--r-- | include/configs/TQM5200.h | 2 | ||||
-rw-r--r-- | include/configs/TQM860M.h | 13 | ||||
-rw-r--r-- | include/configs/TQM866M.h | 49 | ||||
-rw-r--r-- | mips_config.mk | 25 |
26 files changed, 189 insertions, 118 deletions
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c index 9d97905ca9..3eda1009ef 100644 --- a/board/cds/common/ft_board.c +++ b/board/cds/common/ft_board.c @@ -37,17 +37,24 @@ static void cds_pci_fixup(void *blob) map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len); - len /= sizeof(u32); + if (!map) + map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len); - slot = get_pci_slot(); + if (map) { + len /= sizeof(u32); - for (i=0;i<len;i+=7) { - /* We rotate the interrupt pins so that the mapping - * changes depending on the slot the carrier card is in. - */ - map[3] = ((map[3] + slot - 2) % 4) + 1; + slot = get_pci_slot(); - map+=7; + for (i=0;i<len;i+=7) { + /* We rotate the interrupt pins so that the mapping + * changes depending on the slot the carrier card is in. + */ + map[3] = ((map[3] + slot - 2) % 4) + 1; + + map+=7; + } + } else { + printf("*** Warning - No PCI node found\n"); } } #endif diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds index 10c9917986..9639b81acc 100644 --- a/board/dbau1x00/u-boot.lds +++ b/board/dbau1x00/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds index 8ba0b6d4c1..90432cb888 100644 --- a/board/gth2/u-boot.lds +++ b/board/gth2/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } + . = .; + _gp = ALIGN(16) + 0x7ff0; - _gp = ALIGN(16); - - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds index 10c9917986..9639b81acc 100644 --- a/board/incaip/u-boot.lds +++ b/board/incaip/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds index a2d19a84c9..363d974c48 100644 --- a/board/pb1x00/u-boot.lds +++ b/board/pb1x00/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } + . = .; + _gp = ALIGN(16) + 0x7ff0; - _gp = ALIGN(16); - - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds index 1bdac1f4a6..e7ec012c3b 100644 --- a/board/purple/u-boot.lds +++ b/board/purple/u-boot.lds @@ -53,14 +53,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/tb0229/u-boot.lds b/board/tb0229/u-boot.lds index 30a2bc57ea..b2fa9f22dc 100644 --- a/board/tb0229/u-boot.lds +++ b/board/tb0229/u-boot.lds @@ -43,14 +43,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } - - _gp = ALIGN(16); + . = .; + _gp = ALIGN(16) + 0x7ff0; - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c index b746679afa..27a6c4163d 100644 --- a/board/tqm5200/cmd_stk52xx.c +++ b/board/tqm5200/cmd_stk52xx.c @@ -561,7 +561,7 @@ void led_init(void) gpt->gpt6.emsr |= 0x00000024; gpt->gpt7.emsr |= 0x00000024; - +#ifndef CONFIG_TQM5200S /* enable SM501 GPIO control (in both power modes) */ *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= POWER_MODE_GATE_GPIO_PWM_I2C; @@ -574,6 +574,7 @@ void led_init(void) /* configure SM501 gpio pins 48-51 as output */ *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16); +#endif /* !CONFIG_TQM5200S */ } /* @@ -650,7 +651,7 @@ int do_led(char *argv[]) gpt->gpt7.emsr &= ~(1 << 4); } break; - +#ifndef CONFIG_TQM5200S case 24: if (strcmp (argv[3], "on") == 0) { *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= @@ -730,7 +731,7 @@ int do_led(char *argv[]) ~(0x1 << 19); } break; - +#endif /* !CONFIG_TQM5200S */ default: printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]); return 1; @@ -1110,7 +1111,7 @@ int do_rs232(char *argv[]) return error_status; } -#ifndef CONFIG_FO300 +#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) static void sm501_backlight (unsigned int state) { if (state == BL_ON) { @@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state) *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= ~((1 << 26) | (1 << 27)); } -#endif +#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else printf ("Error\n"); return rcode; -#ifndef CONFIG_FO300 +#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) } else if (strncmp (argv[1], "backlight", 4) == 0) { if (strncmp (argv[2], "on", 2) == 0) { sm501_backlight (BL_ON); @@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) sm501_backlight (BL_OFF); return 0; } -#endif +#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ } break; @@ -1228,8 +1229,10 @@ U_BOOT_CMD( " - loopback plug for X83 required\n" "fkt rs232 number\n" " - loopback plug(s) for X2 required\n" +#ifndef CONFIG_TQM5200S "fkt backlight on/off\n" " - switch backlight on or off\n" +#endif /* !CONFIG_TQM5200S */ ); #elif defined(CONFIG_FO300) U_BOOT_CMD( diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c index 29d6f00427..d10cb5937d 100644 --- a/board/tqm5200/tqm5200.c +++ b/board/tqm5200/tqm5200.c @@ -543,6 +543,7 @@ int last_stage_init (void) __asm__ volatile ("sync"); } +#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */ /* * Check for Grafic Controller */ @@ -586,6 +587,7 @@ int last_stage_init (void) #endif return 0; +#endif /* !CONFIG_TQM5200S */ } #ifdef CONFIG_VIDEO_SM501 diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c index 6b206f8a18..cebdcc0764 100644 --- a/board/tqm8xx/tqm8xx.c +++ b/board/tqm8xx/tqm8xx.c @@ -354,6 +354,8 @@ long int initdram (int board_type) udelay (10000); #ifdef CONFIG_CAN_DRIVER + /* UPM initialization for CAN @ CLKOUT <= 66 MHz */ + /* Initialize OR3 / BR3 */ memctl->memc_or3 = CFG_OR3_CAN; memctl->memc_br3 = CFG_BR3_CAN; @@ -362,7 +364,7 @@ long int initdram (int board_type) memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */ /* Initialize UPMB for CAN: single read */ - memctl->memc_mdr = 0xFFFFC004; + memctl->memc_mdr = 0xFFFFCC04; memctl->memc_mcr = 0x0100 | UPMB; memctl->memc_mdr = 0x0FFFD004; @@ -374,23 +376,23 @@ long int initdram (int board_type) memctl->memc_mdr = 0x3FFFC004; memctl->memc_mcr = 0x0103 | UPMB; - memctl->memc_mdr = 0xFFFFDC05; + memctl->memc_mdr = 0xFFFFDC07; memctl->memc_mcr = 0x0104 | UPMB; /* Initialize UPMB for CAN: single write */ - memctl->memc_mdr = 0xFFFCC004; + memctl->memc_mdr = 0xFFFCCC04; memctl->memc_mcr = 0x0118 | UPMB; - memctl->memc_mdr = 0xCFFCD004; + memctl->memc_mdr = 0xCFFCDC04; memctl->memc_mcr = 0x0119 | UPMB; - memctl->memc_mdr = 0x0FFCC000; + memctl->memc_mdr = 0x3FFCC000; memctl->memc_mcr = 0x011A | UPMB; - memctl->memc_mdr = 0x7FFCC004; + memctl->memc_mdr = 0xFFFCC004; memctl->memc_mcr = 0x011B | UPMB; - memctl->memc_mdr = 0xFFFDCC05; + memctl->memc_mdr = 0xFFFDC405; memctl->memc_mcr = 0x011C | UPMB; #endif /* CONFIG_CAN_DRIVER */ diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk index b29986e26b..487c4eb5d6 100644 --- a/cpu/mips/config.mk +++ b/cpu/mips/config.mk @@ -35,6 +35,6 @@ else ENDIANNESS = -EB endif -MIPSFLAGS += $(ENDIANNESS) -mabicalls +MIPSFLAGS += $(ENDIANNESS) PLATFORM_CPPFLAGS += $(MIPSFLAGS) diff --git a/cpu/mips/start.S b/cpu/mips/start.S index e91e2137d7..074d01d2dd 100644 --- a/cpu/mips/start.S +++ b/cpu/mips/start.S @@ -234,11 +234,11 @@ reset: li t0, CONF_CM_UNCACHED mtc0 t0, CP0_CONFIG - /* Initialize GOT pointer. + /* Initialize $gp. */ bal 1f nop - .word _GLOBAL_OFFSET_TABLE_ + .word _gp 1: move gp, ra lw t1, 0(ra) @@ -306,9 +306,9 @@ relocate_code: move t1, a2 /* - * Fix GOT pointer: + * Fix $gp: * - * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address + * New $gp = (Old $gp - CFG_MONITOR_BASE) + Destination Address */ move t6, gp sub gp, CFG_MONITOR_BASE @@ -341,15 +341,22 @@ relocate_code: j t0 nop + .gpword _GLOBAL_OFFSET_TABLE_ /* _GLOBAL_OFFSET_TABLE_ - _gp */ .word uboot_end_data .word uboot_end .word num_got_entries in_ram: - /* Now we want to update GOT. + /* + * Now we want to update GOT. + * + * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object + * generated by GNU ld. Skip these reserved entries from relocation. */ lw t3, -4(t0) /* t3 <-- num_got_entries */ - addi t4, gp, 8 /* Skipping first two entries. */ + lw t4, -16(t0) /* t4 <-- (_GLOBAL_OFFSET_TABLE_ - _gp) */ + add t4, t4, gp /* t4 now holds _GLOBAL_OFFSET_TABLE_ */ + addi t4, t4, 8 /* Skipping first two entries. */ li t2, 2 1: lw t1, 0(t4) diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 08e04685f5..bbc54448da 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -163,7 +163,12 @@ int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) * Initiate hard reset in debug control register DBCR0 * Make sure MSR[DE] = 1 */ - unsigned long val; + unsigned long val, msr; + + msr = mfmsr (); + msr |= MSR_DE; + mtmsr (msr); + val = mfspr(DBCR0); val |= 0x70000000; mtspr(DBCR0,val); diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 2c98c2ad8a..ada6ea505f 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -218,6 +218,8 @@ _start_e500: bdnz 0b /* Clear and set up some registers. */ + li r0,0 + mtmsr r0 li r0,0x0000 lis r1,0xffff mtspr DEC,r0 /* prevent dec exceptions */ @@ -266,18 +268,17 @@ _start_e500: */ lis r3,CFG_INIT_RAM_ADDR@h ori r3,r3,CFG_INIT_RAM_ADDR@l - li r2,512 /* 512*32=16K */ + li r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE)) mtctr r2 li r0,0 1: dcbz r0,r3 dcbtls 0,r0,r3 - addi r3,r3,32 + addi r3,r3,CFG_CACHELINE_SIZE bdnz 1b /* Jump out the last 4K page and continue to 'normal' start */ #ifdef CFG_RAMBOOT - bl 3f b _start_cont #else /* Calculate absolute address in FLASH and jump there */ @@ -286,15 +287,9 @@ _start_e500: ori r3,r3,CFG_MONITOR_BASE@l addi r3,r3,_start_cont - _start + _START_OFFSET mtlr r3 + blr #endif -3: li r0,0 - mtspr SRR1,r0 /* Keep things disabled for now */ - mflr r1 - mtspr SRR0,r1 - rfi - isync - .text .globl _start _start: @@ -701,6 +696,7 @@ in8: .globl out8 out8: stb r4,0x0000(r3) + sync blr /*------------------------------------------------------------------------------- */ @@ -710,6 +706,7 @@ out8: .globl out16 out16: sth r4,0x0000(r3) + sync blr /*------------------------------------------------------------------------------- */ @@ -719,6 +716,7 @@ out16: .globl out16r out16r: sthbrx r4,r0,r3 + sync blr /*------------------------------------------------------------------------------- */ @@ -728,6 +726,7 @@ out16r: .globl out32 out32: stw r4,0x0000(r3) + sync blr /*------------------------------------------------------------------------------- */ @@ -737,6 +736,7 @@ out32: .globl out32r out32r: stwbrx r4,r0,r3 + sync blr /*------------------------------------------------------------------------------- */ @@ -1061,11 +1061,11 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3,(CFG_INIT_RAM_ADDR & ~31)@h ori r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l - li r4,512 + li r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE)) mtctr r4 1: icbi r0,r3 dcbi r0,r3 - addi r3,r3,32 + addi r3,r3,CFG_CACHELINE_SIZE bdnz 1b sync /* Wait for all icbi to complete on bus */ isync diff --git a/drivers/tsec.c b/drivers/tsec.c index 4ff3339c7d..7ba8f0cace 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -803,6 +803,7 @@ static void startup_tsec(struct eth_device *dev) /* Tell the DMA it is clear to go */ regs->dmactrl |= DMACTRL_INIT_SETTINGS; regs->tstat = TSTAT_CLEAR_THALT; + regs->rstat = RSTAT_CLEAR_RHALT; regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS); } diff --git a/examples/mips.lds b/examples/mips.lds index 9d9849bf5c..a7707287a2 100644 --- a/examples/mips.lds +++ b/examples/mips.lds @@ -39,14 +39,14 @@ SECTIONS . = ALIGN(4); .data : { *(.data) } - . = ALIGN(4); - .sdata : { *(.sdata) } + . = .; + _gp = ALIGN(16) + 0x7ff0; - _gp = ALIGN(16); - - __got_start = .; - .got : { *(.got) } - __got_end = .; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } .sdata : { *(.sdata) } diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index b8214b1c85..0e6abd7d0f 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -49,7 +49,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_AU1X00 */ -#define UNCACHED_SDRAM(a) PHYSADDR(a) +#define UNCACHED_SDRAM(a) KSEG1ADDR(a) #endif /* CONFIG_AU1X00 */ #endif /* __ASSEMBLY__ */ /* diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 14b041e3ae..d392b981ed 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -168,6 +168,7 @@ #undef CONFIG_CMD_MFSL #undef CONFIG_CMD_MMC #undef CONFIG_CMD_NAND +#undef CONFIG_CMD_ONENAND #undef CONFIG_CMD_PCMCIA #undef CONFIG_CMD_REISER #undef CONFIG_CMD_SCSI @@ -177,6 +178,7 @@ #undef CONFIG_CMD_UNIVERSE #undef CONFIG_CMD_USB #undef CONFIG_CMD_XIMG +#undef CONFIG_CMD_AT91_SPIMUX /* Define a command string that is automatically executed when no character * is read on the console interface withing "Boot Delay" after reset. diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 4e061bd9ff..8dda6651ef 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8541@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8541@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 6083715189..4edc7fd2b6 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -340,6 +340,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8548@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 1d1b7c9079..c414bf033e 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -316,6 +316,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8555@e0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/soc8555@e0000000/serial@4600" +#define OF_PCI "pci@e0008000" /* * I2C diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index ba744e99f8..548e1582a8 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -297,7 +297,7 @@ extern unsigned long get_clock_freq(void); #define OF_SOC "soc8568@e0000000" #define OF_QE "qe@e0080000" #define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4600" +#define OF_STDOUT_PATH "/soc8568@e0000000/serial@4500" /* * I2C diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index d55340404d..c3f16f524e 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -547,7 +547,7 @@ # if defined (CONFIG_TQM5200_REV100) # error TQM5200 REV100 not supported on STK52XX REV200 or above # else/* TQM5200 REV200 and above */ -# define CFG_GPS_PORT_CONFIG 0x91500004 +# define CFG_GPS_PORT_CONFIG 0x91500404 # endif # endif #elif defined (CONFIG_FO300) diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 684b86f2ef..fe3a2f020c 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -69,9 +69,14 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM860M/uImage\0" \ - "fdt_addr=40080000\0" \ - "kernel_addr=400A0000\0" \ + "fdt_addr=400C0000\0" \ + "kernel_addr=40100000\0" \ "ramdisk_addr=40280000\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off 40000000 +${filesize};" \ + "erase 40000000 +${filesize};" \ + "cp.b 200000 40000000 ${filesize};" \ + "protect on 40000000 +${filesize}\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -172,7 +177,7 @@ #define CFG_FLASH_BASE 0x40000000 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -193,7 +198,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 0d778919a2..ca3c166524 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -81,9 +81,14 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/TQM866M/uImage\0" \ - "fdt_addr=40080000\0" \ - "kernel_addr=400A0000\0" \ + "fdt_addr=400C0000\0" \ + "kernel_addr=40100000\0" \ "ramdisk_addr=40280000\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "update=protect off 40000000 +${filesize};" \ + "erase 40000000 +${filesize};" \ + "cp.b 200000 40000000 ${filesize};" \ + "protect on 40000000 +${filesize}\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -215,7 +220,7 @@ #define CFG_FLASH_BASE 0x40000000 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -236,7 +241,7 @@ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ #define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) @@ -421,26 +426,30 @@ #define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) /* - * Memory Periodic Timer Prescaler - * Periodic timer for refresh, start with refresh rate for 40 MHz clock - * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK) + * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad) + * + * CPUclock(MHz) * 31.2 + * CFG_MAMR_PTA = ----------------------------------- with DFBRG = 0 + * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16 + * + * CPU clock = 15 MHz: CFG_MAMR_PTA = 29 -> 4 * 7.73 us + * CPU clock = 50 MHz: CFG_MAMR_PTA = 97 -> 4 * 7.76 us + * CPU clock = 66 MHz: CFG_MAMR_PTA = 128 -> 4 * 7.75 us + * CPU clock = 133 MHz: CFG_MAMR_PTA = 255 -> 4 * 7.67 us + * + * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will + * be met also in the default configuration, i.e. if environment variable + * 'cpuclk' is not set. */ -#define CFG_MAMR_PTA 39 +#define CFG_MAMR_PTA 97 /* - * For 16 MBit, refresh rates could be 31.3 us - * (= 64 ms / 2K = 125 / quad bursts). - * For a simpler initialization, 15.6 us is used instead. - * - * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + * Memory Periodic Timer Prescaler Register (MPTPR) values. */ -#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ +/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 +/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* * MAMR settings for SDRAM diff --git a/mips_config.mk b/mips_config.mk index d8aa5fa777..67fb67d291 100644 --- a/mips_config.mk +++ b/mips_config.mk @@ -22,3 +22,28 @@ # PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ + +# +# From Linux arch/mips/Makefile +# +# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel +# code since it only slows down the whole thing. At some point we might make +# use of global pointer optimizations but their use of $28 conflicts with +# the current pointer optimization. +# +# The DECStation requires an ECOFF kernel for remote booting, other MIPS +# machines may also. Since BFD is incredibly buggy with respect to +# crossformat linking we rely on the elf2ecoff tool for format conversion. +# +# cflags-y += -G 0 -mno-abicalls -fno-pic -pipe +# cflags-y += -msoft-float +# LDFLAGS_vmlinux += -G 0 -static -n -nostdlib +# MODFLAGS += -mlong-calls +# + +# +# Meanwhile, U-Boot rely on PIC. We add proper switches explicitly. +# +PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic -pipe +PLATFORM_CPPFLAGS += -msoft-float +PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib |