summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/i2c/s3c24x0_i2c.c214
1 files changed, 90 insertions, 124 deletions
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index cd09c788be..c65360d0ff 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -43,7 +43,7 @@
#define I2C_START_STOP 0x20 /* START / STOP */
#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
-#define I2C_TIMEOUT 1 /* 1 second */
+#define I2C_TIMEOUT_MS 1000 /* 1 second */
/*
@@ -84,22 +84,26 @@ static void SetI2CSCL(int x)
}
#endif
+/*
+ * Wait til the byte transfer is completed.
+ *
+ * @param i2c- pointer to the appropriate i2c register bank.
+ * @return I2C_OK, if transmission was ACKED
+ * I2C_NACK, if transmission was NACKED
+ * I2C_NOK_TIMEOUT, if transaction did not complete in I2C_TIMEOUT_MS
+ */
+
static int WaitForXfer(struct s3c24x0_i2c *i2c)
{
- int i;
+ ulong start_time = get_timer(0);
- i = I2C_TIMEOUT * 10000;
- while (!(readl(&i2c->iiccon) & I2CCON_IRPND) && (i > 0)) {
- udelay(100);
- i--;
- }
+ do {
+ if (readl(&i2c->iiccon) & I2CCON_IRPND)
+ return (readl(&i2c->iicstat) & I2CSTAT_NACK) ?
+ I2C_NACK : I2C_OK;
+ } while (get_timer(start_time) < I2C_TIMEOUT_MS);
- return (readl(&i2c->iiccon) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
-}
-
-static int IsACK(struct s3c24x0_i2c *i2c)
-{
- return !(readl(&i2c->iicstat) & I2CSTAT_NACK);
+ return I2C_NOK_TOUT;
}
static void ReadWriteByte(struct s3c24x0_i2c *i2c)
@@ -180,21 +184,27 @@ unsigned int i2c_get_bus_num(void)
void i2c_init(int speed, int slaveadd)
{
+ int i;
struct s3c24x0_i2c *i2c;
#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
#endif
- int i;
+ ulong start_time = get_timer(0);
/* By default i2c channel 0 is the current bus */
g_current_bus = 0;
i2c = get_base_i2c();
- /* wait for some time to give previous transfer a chance to finish */
- i = I2C_TIMEOUT * 1000;
- while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) {
- udelay(1000);
- i--;
+ /*
+ * In case the previous transfer is still going, wait to give it a
+ * chance to finish.
+ */
+ while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
+ if (get_timer(start_time) > I2C_TIMEOUT_MS) {
+ printf("%s: I2C bus busy for %p\n", __func__,
+ &i2c->iicstat);
+ return;
+ }
}
#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
@@ -260,7 +270,8 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
unsigned char data[],
unsigned short data_len)
{
- int i, result;
+ int i = 0, result;
+ ulong start_time = get_timer(0);
if (data == 0 || data_len == 0) {
/*Don't support data transfer of no length or to address 0 */
@@ -268,128 +279,78 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
return I2C_NOK;
}
- /* Check I2C bus idle */
- i = I2C_TIMEOUT * 1000;
- while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) {
- udelay(1000);
- i--;
+ while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
+ if (get_timer(start_time) > I2C_TIMEOUT_MS)
+ return I2C_NOK_TOUT;
}
- if (readl(&i2c->iicstat) & I2CSTAT_BSY)
- return I2C_NOK_TOUT;
-
writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon);
- result = I2C_OK;
- switch (cmd_type) {
- case I2C_WRITE:
- if (addr && addr_len) {
- writel(chip, &i2c->iicds);
- /* send START */
- writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
- &i2c->iicstat);
- i = 0;
- while ((i < addr_len) && (result == I2C_OK)) {
- result = WaitForXfer(i2c);
- writel(addr[i], &i2c->iicds);
- ReadWriteByte(i2c);
- i++;
- }
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- result = WaitForXfer(i2c);
- writel(data[i], &i2c->iicds);
- ReadWriteByte(i2c);
- i++;
- }
- } else {
- writel(chip, &i2c->iicds);
- /* send START */
- writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
- &i2c->iicstat);
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- result = WaitForXfer(i2c);
- writel(data[i], &i2c->iicds);
- ReadWriteByte(i2c);
- i++;
- }
+ /* Get the slave chip address going */
+ writel(chip, &i2c->iicds);
+ if ((cmd_type == I2C_WRITE) || (addr && addr_len))
+ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+ &i2c->iicstat);
+ else
+ writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
+ &i2c->iicstat);
+
+ /* Wait for chip address to transmit. */
+ result = WaitForXfer(i2c);
+ if (result != I2C_OK)
+ goto bailout;
+
+ /* If register address needs to be transmitted - do it now. */
+ if (addr && addr_len) {
+ while ((i < addr_len) && (result == I2C_OK)) {
+ writel(addr[i++], &i2c->iicds);
+ ReadWriteByte(i2c);
+ result = WaitForXfer(i2c);
}
+ i = 0;
+ if (result != I2C_OK)
+ goto bailout;
+ }
- if (result == I2C_OK)
+ switch (cmd_type) {
+ case I2C_WRITE:
+ while ((i < data_len) && (result == I2C_OK)) {
+ writel(data[i++], &i2c->iicds);
+ ReadWriteByte(i2c);
result = WaitForXfer(i2c);
-
- /* send STOP */
- writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
- ReadWriteByte(i2c);
+ }
break;
case I2C_READ:
if (addr && addr_len) {
+ /*
+ * Register address has been sent, now send slave chip
+ * address again to start the actual read transaction.
+ */
writel(chip, &i2c->iicds);
- /* send START */
- writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
- &i2c->iicstat);
- result = WaitForXfer(i2c);
- if (IsACK(i2c)) {
- i = 0;
- while ((i < addr_len) && (result == I2C_OK)) {
- writel(addr[i], &i2c->iicds);
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
- i++;
- }
-
- writel(chip, &i2c->iicds);
- /* resend START */
- writel(I2C_MODE_MR | I2C_TXRX_ENA |
- I2C_START_STOP, &i2c->iicstat);
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1)
- writel(readl(&i2c->iiccon)
- & ~I2CCON_ACKGEN,
- &i2c->iiccon);
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
- data[i] = readl(&i2c->iicds);
- i++;
- }
- } else {
- result = I2C_NACK;
- }
-
- } else {
- writel(chip, &i2c->iicds);
- /* send START */
+
+ /* Generate a re-START. */
writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
&i2c->iicstat);
+ ReadWriteByte(i2c);
result = WaitForXfer(i2c);
- if (IsACK(i2c)) {
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1)
- writel(readl(&i2c->iiccon) &
- ~I2CCON_ACKGEN,
- &i2c->iiccon);
- ReadWriteByte(i2c);
- result = WaitForXfer(i2c);
- data[i] = readl(&i2c->iicds);
- i++;
- }
- } else {
- result = I2C_NACK;
- }
+ if (result != I2C_OK)
+ goto bailout;
}
- /* send STOP */
- writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
- ReadWriteByte(i2c);
+ while ((i < data_len) && (result == I2C_OK)) {
+ /* disable ACK for final READ */
+ if (i == data_len - 1)
+ writel(readl(&i2c->iiccon)
+ & ~I2CCON_ACKGEN,
+ &i2c->iiccon);
+ ReadWriteByte(i2c);
+ result = WaitForXfer(i2c);
+ data[i++] = readl(&i2c->iicds);
+ }
+ if (result == I2C_NACK)
+ result = I2C_OK; /* Normal terminated read. */
break;
default:
@@ -398,6 +359,11 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
break;
}
+bailout:
+ /* Send STOP. */
+ writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
+ ReadWriteByte(i2c);
+
return result;
}
generated by cgit (git 2.34.1) at 2024-12-23 19:22:51 +0000