diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 376 |
1 files changed, 376 insertions, 0 deletions
@@ -1,3 +1,237 @@ +commit d62f64cc23a940eafe712c776b3249e4160753d1 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed May 16 00:13:33 2007 +0200 + + Coding Style Cleanup, new CHANGELOG + +commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 +Author: Piotr Kruszynski <ppk@semihalf.com> +Date: Thu May 10 16:55:52 2007 +0200 + + [Motion-PRO] Add MTD and JFFS2 support, also add default partition + definition. + +commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue May 8 15:57:43 2007 +0200 + + add: reading special purpose registers + +commit 1a50f164beb065f360fbddb76029607d6b099698 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue May 8 14:52:52 2007 +0200 + + add: Microblaze V5 exception handling + +commit ab874d5047e5d30dbc1e517ff26083efffa98ecb +Author: Michal Simek <monstr@monstr.eu> +Date: Tue May 8 14:39:11 2007 +0200 + + add: FSL control read and write + +commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 +Author: Piotr Kruszynski <ppk@semihalf.com> +Date: Tue May 8 13:05:44 2007 +0200 + + [Motion-PRO] Add support for I2C, EEPROM and RTC. + +commit fa5c2ba123b1bf88455bfc21db5e786ca045029d +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue May 8 10:23:56 2007 +0200 + + [Motion-PRO] Add ATA support. Add CF-booting commands to the default + environment. + +commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue May 8 09:39:12 2007 +0200 + + [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This + eliminates networking problems in Linux (timeouts). + +commit 1f1369c34b629be94702684d41d3fddf0f6193e7 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue May 8 09:21:57 2007 +0200 + + [Motion-PRO] Enable Flat Device Tree support and modify default environment + to allow booting of FDT-expecting kernels. + +commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 23:58:31 2007 +0200 + + new: USE_MSR_INTR support + +commit 008861a2f3ef2c062744d733787c7e530a1b8761 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Mon May 7 22:36:15 2007 +0200 + + [MPC5xxx] There are networking problems on the Motion-PRO board with + current PHY initalization code (tftp timeouts all the time). This commit + temporarily disables PHY initalization sequence to make the networking + operational, until a fix is found. + +commit abca901869c3760b6c5fecb825db6c1d91a78a93 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon May 7 22:10:36 2007 +0200 + + Get rid of duplicated file (see include/configs/sbc8560.h instead) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon May 7 22:07:08 2007 +0200 + + Get rid of duplicated file (see doc/README.SBC8560 instead) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:43:10 2007 +0200 + + fix: read and write MSR - repair number of parameters + +commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:33:51 2007 +0200 + + new: fsl interrupt support + FSL_Has_data is connected to INTC. + +commit 792032baa7d625e34c981ab6df521911bd8dc861 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:30:12 2007 +0200 + + fix: interrupt handler + remove asm code + +commit f3f001a341ef185d0f13841be5b5dc3395aacc31 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:25:08 2007 +0200 + + fix: remove asm code + +commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:12:43 2007 +0200 + + fix: clean interrupt + +commit 42efed6130c8fcf7da881385b5427065d2801757 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 17:22:25 2007 +0200 + + fix: interrupt handler for multiple sources + +commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 17:11:09 2007 +0200 + + new: add writing to msr register + +commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 +Author: Timur Tabi <timur@freescale.com> +Date: Sat May 5 08:12:30 2007 +0200 + + 5xxx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 +Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> +Date: Sun Apr 29 14:01:54 2007 +0200 + + [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message + + MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up + message. Use PVR to distinguish between the two variants, and print proper CPU + information. + + Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Wed Apr 25 16:01:26 2007 +0200 + + [PATCH] simplify silent console + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Mon Apr 23 15:30:39 2007 +0200 + + [PATCH] Avoid assigning PCI resources from zero address + + If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE + core complains and IDE drivers fails to work. Also, assigning zero to a BAR + was illegal according to PCI 2.1 (the later revisions seem to have excluded the + sentence about "0" being considered an invalid address) -- so, use a reasonable + starting value of 0x1000 (that's what the most Linux archs are using). + + Alternatively, one might have fixed the calls to pci_set_region() individually + (some code even seems to have taken care of this issue) but that would have + been a lot more work. :-) + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon Apr 23 14:00:11 2007 +0200 + + [patch] setenv(...) can delete environmentalvariables + + update setenv() function so that entering a NULL value for the + variable's value will delete the environmental variable + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Apr 23 13:54:24 2007 +0200 + + [patch] use unsigned char in smc91111 driver for mac + + the v_mac variable in the smc91111 driver is declared as a signed char ... + this causes problems when one of the bytes in the MAC is "signed" like 0xE0 + because when it gets printed out, you get a display like: + 0xFFFFFFE0 and that's no good + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit ffc50f9bb194343c6303517a517708457a5eb6b8 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat May 5 18:54:42 2007 +0200 + + new: FSL and MSR support #2 + +commit f7e2e0eb0668136305f78bb9c21be79b48a34247 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat May 5 18:27:16 2007 +0200 + + new: FSL and MSR support + +commit 2f15278c2eb911c668b4fe562130b78cf554d139 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat May 5 18:23:11 2007 +0200 + + Coding stylke cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 Author: Wolfgang Denk <wd@denx.de> Date: Sat May 5 18:05:02 2007 +0200 @@ -67,6 +301,14 @@ Date: Fri May 4 10:02:33 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu May 3 19:43:52 2007 -0500 + + mpc83xx: fix trivial error in MAKEALL + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a Author: Wolfgang Denk <wd@denx.de> Date: Thu May 3 16:34:41 2007 +0200 @@ -148,6 +390,33 @@ Date: Wed Feb 7 15:28:04 2007 -0600 Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> +commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 +Author: Timur Tabi <timur@freescale.com> +Date: Mon Apr 30 13:59:50 2007 -0500 + + Fix memory initialization on MPC8349E-mITX + + Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. + This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary + on some ITX boards, notably those with a revision 3.1 CPU. + + Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into + ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Michael Benedict <MBenedict@twacs.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Apr 30 15:26:21 2007 -0500 + + mpc83xx: replace elaborate boottime verbosity with 'clocks' command + + and fix CPU: to align with Board: display text. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit c1ab82669d9525998c34e802a12cad662723f22a Author: James Yang <James.Yang@freescale.com> Date: Fri Mar 16 13:02:53 2007 -0500 @@ -167,6 +436,18 @@ Date: Sun Apr 29 14:13:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 5c5d3242935cf3543af01142627494434834cf98 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Apr 25 12:34:38 2007 -0500 + + mpc83xx: minor fixups for 8313rdb introduction + +commit 144876a380f5756f57412caf74c1d6dc201dd796 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue Apr 24 23:01:02 2007 +0200 + + [PATCH] MTD partition support, JFFS2 support + commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Date: Tue Apr 24 14:03:45 2007 +0200 @@ -392,6 +673,71 @@ Date: Thu Dec 14 14:14:55 2006 +0800 board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> +commit 96b8a05432f346f36493535c85320b70ec9c7c1b +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:54:15 2007 -0500 + + mpc83xx: Add MPC8313ERDB support. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 49ea3b6eafe606285ae4d5c378026153dde53200 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:21 2007 -0500 + + mpc83xx: Add generic PCI setup code. + + Board code can now request the generic setup code rather than having to + copy-and-paste it for themselves. Boards should be converted to use this + once they're tested with it. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:19 2007 -0500 + + mpc83xx: Add 831x support to speed.c. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:18 2007 -0500 + + mpc83xx: Add 831x support to global_data.h + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:16 2007 -0500 + + mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). + + Rather than misleadingly define PVR_83xx as the specific type of 83xx + being built for, the PVR of each core revision is defined. checkcpu() now + prints the core that it detects, rather than aborting if it doesn't find + what it thinks it wants. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:15 2007 -0500 + + mpc83xx: Recognize SPR values for MPC8311 and MPC8313. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit d87c57b201b4572d16f1b642998faa00c9912b16 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:31:55 2007 -0500 + + mpc83xx: Add register definitions for MPC831x. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 Author: Stefan Roese <sr@denx.de> Date: Mon Apr 23 12:00:22 2007 +0200 @@ -400,6 +746,24 @@ Date: Mon Apr 23 12:00:22 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 32556443840f127170e4baa8bdd5b567039f6c36 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat Apr 21 21:07:22 2007 +0200 + + [PATCH] SystemACE support for Microblaze + +commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f +Author: Michal Simek <monstr@monstr.eu> +Date: Sat Apr 21 21:02:40 2007 +0200 + + 16bit read/write little endian + +commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat Apr 21 20:53:31 2007 +0200 + + Change ML401 parameters - Xilinx BSP + commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d Author: Ed Swarthout <Ed.Swarthout@freescale.com> Date: Wed Feb 28 05:37:29 2007 -0600 @@ -882,6 +1246,18 @@ Date: Fri Apr 13 08:02:24 2007 +0200 Signed-of-by: Greg Lopp <lopp@pobox.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> +commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 +Author: Xie Xiaobo <r63061@freescale.com> +Date: Fri Mar 9 19:08:25 2007 +0800 + + Fix two bugs for MPC83xx DDR2 controller SPD Init + + There are a few bugs in the cpu/mpc83xx/spd_sdram.c + the first bug is that the picos_to_clk routine introduces a huge + rounding error in 83xx. + the second bug is that the mode register write recovery field is + tWR-1, not tWR >> 1. + commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 Author: Jeffrey Mann <mannj@embeddedplanet.com> Date: Thu Apr 12 14:15:59 2007 +0200 |