diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 4947 |
1 files changed, 4947 insertions, 0 deletions
@@ -1,3 +1,3946 @@ +commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Apr 8 14:00:57 2008 -0400 + + Add support for u-boot in svn and localversion-* files + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit d23ff6827decf121461fbc5622612fd7effe207e +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Thu Apr 3 17:04:22 2008 +0200 + + MX31ADS network and flash updates + + This patch allows U-Boot to use buffered writes to the Spansion NOR + flash installed on this board, and eliminates long delays in network + transfers after the board startup. + + Also modify flash layout to embed main and redundant environment + blocks in the U-Boot image. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit b5dc9b304d289831f291843ff88a45cbdf1a6290 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Mon Apr 14 10:53:12 2008 +0200 + + Support for the MX31ADS evaluation board from Freescale + + This patch adds support for the MX31ADS evaluation board from Freescale, + initialization code is copied from RedBoot sources, also provided by + Freescale. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 +Author: Anatolij Gustschin <agust@denx.de> +Date: Thu Apr 17 18:18:00 2008 +0200 + + Fix crash on sequoia in ppc_4xx_eth_init + + Currently U-Boot crashes in ppc_4xx_eth_init on sequoia + with cache enabled (TLB Parity exeption). This patch + fixes the problem. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b +Author: Anatolij Gustschin <agust@denx.de> +Date: Thu Apr 17 18:15:27 2008 +0200 + + ppc4xx: Fix crash on sequoia with cache enabled + + Currently U-Boot crashes on sequoia board in CPU POST if + cache is enabled (CONFIG_4xx_DCACHE defined). The cache + won't be disabled by change_tlb before CPU POST because + there is an insufficient adress range check since + CFG_MEM_TOP_HIDE was introduced. This patch tries to fix + this problem. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit 43c509254fab375c49936498da944658117ed07c +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Thu Apr 17 23:35:13 2008 +0900 + + Use jr as register jump instruction + + Current assembler codes are inconsistent in the way of register jump + instruction usage; some use jr, some use j. Of course GNU as allows both + usages, but as can be expected from `Jump Register' the mnemonic `jr' is + more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage + at all. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 7ce63709828d37b08866e537339a169bd0db2bd3 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Tue Apr 15 14:15:30 2008 +0200 + + RTC driver for MC13783 + + MC13783 is a multifunction IS with an SPI interface to the host. This + driver handles the RTC controller in this chip. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 38254f45b0b412332726c90d3184ad47479fcffb +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Tue Apr 15 14:14:25 2008 +0200 + + New i.MX31 SPI driver + + This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far + only implemented and tested on i.MX31, can with a modified register layout + and definitions be used for i.MX27, I think, MXC CPUs have similar SPI + controllers too. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38 +Author: Magnus Lilja <lilja.magnus@gmail.com> +Date: Tue Apr 15 19:09:10 2008 +0200 + + Fix name of i.MX31 boards in config file header + + Correct the name of the i.MX31 Litekit and phyCORE boards in config files. + + Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> + +commit a49864593e083a5d0779fb9ca98e5a0f2053183d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Apr 13 19:42:19 2008 -0400 + + allow ports to override go behavior + + Split the arch-specific logic out of the common go code and into a dedicated + weak function called do_go_exec() that lives in cpu directories. This will + need review from i386/nios people to make sure I didn't break them. + +commit 017e9b7925f74878d0e9475388cca9bda5ef9482 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Apr 13 19:42:18 2008 -0400 + + allow ports to override bootelf behavior + + Change the bootelf setup function into a dedicated weak function called + do_bootelf_exec. This way ports can control the behavior however they + like before/after calling the ELF entry point. + +commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7 +Author: Ulf Samuelsson <ulf@atmel.com> +Date: Sat Apr 12 20:56:03 2008 +0200 + + Reorder ARM boards in Makefile + + Rearrange ARM boards in Makefile so that ARM926EJ-S boards + are no longer under ARM92xT header. + + Signed-off-by: Ulf Samuelsson <ulf@atmel.com> + Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688 +Author: Ulf Samuelsson <ulf@atmel.com> +Date: Sat Apr 12 20:29:44 2008 +0200 + + Clean up dataflash partitioning + + This patch removes the board dependent parts from + "drivers/mtd/dataflash.c". + Each board relying on this, will have the appropriate + code in a new file, "partition.c" in the board directory. + board Makefiles updated to use the file. + + The dataflash partitions are aligned on sector/page boundaries. + + The CONFIG_NEW_DF_PARTITION was used to create named partitions + This is now the default operation, and the CONFIG variable is removed. + + Signed-off-by: Ulf Samuelsson <ulf@atmel.com> + +commit 51ecde946fec511a16346e498204ca10ad71080d +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Apr 12 14:08:45 2008 +0200 + + gitignore: udpate stgit generated and .patch file + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 66e39818e95f51ee1c1dd2094407a8929543fa6d +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Apr 18 00:15:36 2008 -0700 + + Get rid of redundant copy of renamed header file. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc +Author: Vlad Lungu <vlad@comsys.ro> +Date: Fri Apr 11 21:20:14 2008 +0300 + + Fix dependency generation for older gcc versions + + With gcc 3.3.3 at least, compilation fails with + + Generating include/autoconf.mk + gcc: compilation of header file requested + make: *** [include/autoconf.mk] Error 1 + + since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba. + + Signed-off-by: Vlad Lungu <vlad@comsys.ro> + +commit cb1c4896905ab22fcd982e6a8a539f0031942e71 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Apr 11 11:07:49 2008 +0200 + + Restore the ability to continue booting after legacy image overwrite + + Before new uImage code was merged, bootm code allowed for the kernel image to + get overwritten during decompresion. new uImage introduced a check for image + overwrites and refused to boot the image that got overwritten. This patch + restores the old behavior. It also adds a warning when the image overwriten is + a multi-image file, because in such case accessing componentes other than the + first one will fail. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Apr 11 11:07:43 2008 +0200 + + ppc: Fix ftd_blob variable init when processing raw blob + + Set fdt_blob variable before its value is printed out. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 3d36be030043cd841a2551d00a395135e363a64b +Author: Jason Wessel <jason.wessel@windriver.com> +Date: Thu Apr 10 14:30:16 2008 -0500 + + Remove all the search paths from the .lds files. + + The cross compiler is responsible for providing the correct libraries + and the logic to find the linking libraries. + + Signed-off-by: Jason Wessel <jason.wessel@windriver.com> + +commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Mon Apr 14 15:44:16 2008 +0200 + + Boot-related documentation update + + - document 'bootm_low' and 'bootm_size' environment variables + - update inaccurate CFG_BOOTMAPSZ entry + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Wed Apr 9 17:34:08 2008 +0200 + + Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code" + + Restore logic reverted by commit + + commit 80767a6cead9990d9e77e62be947843c2c72f469 + Author: Peter Pearse <peter.pearse@arm.com> + Date: Wed Sep 5 16:04:41 2007 +0100 + + Changed API name to coloured_led.h + Removed code using deprecated ifdef CONFIG_BOOTBINFUNC + Tidied other cpu/arm920t/start.S code + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Apr 8 10:24:24 2008 -0400 + + Remove conflicting NAND ID + + There are two NAND entries with ID 0xDC and this obviously causes problems. + In the kernel, they punted the first entry, so we should do the same. + + See this upstream e-mail for more info: + http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html + + Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 188e94c370621708d13547d58dbc6ed3c5602aa8 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Tue Apr 8 16:20:35 2008 +0900 + + cpu/mips/cpu.c: Fix flush_cache bug + + Cache operations have to take line address (addr), not start_addr. + I noticed this bug when debugging ping failure. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + +commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4 +Author: Martin Krause <martin.krause@tqs.de> +Date: Thu Apr 3 14:29:01 2008 +0200 + + TQM5200: fix default IDE reset level + + Before the first call of ide_reset(), the level of the IDE reset + signal on the TQM5200 is low (reset asserted). This patch sets the + default value to high (reset not asserted). + + Currently this patch fixes no real problem, but it is cleaner to + assert the reset signal only on demand, and not permanently. + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit c61e033d6e8abb7b4060ee36060961e1399f6079 +Author: Detlev Zundel <dzu@denx.de> +Date: Thu Apr 3 14:18:48 2008 +0200 + + mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit f308572e19eb7fe63aa3d41f214cde4c23c9800f +Author: Detlev Zundel <dzu@denx.de> +Date: Thu Apr 3 14:18:47 2008 +0200 + + mgcoge, mgsuv: rename 'addcon' to 'addcons' + + The latter name with 13 users is already established, so we will use + that. + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit e175eacc87c3a9e4dad0799fee0e95732520afc7 +Author: Martin Krause <martin.krause@tqs.de> +Date: Thu Apr 3 13:37:56 2008 +0200 + + IDE: fix bug in reset sequence + + According to the ata (ata5) specification the RESET- signal + shall be asserted for at least 25 us. Without this patch, + the RESET- signal is asserted on some boards for only < 1 us + (e. g. on the TQM5200). This patch adds a general delay of + 25 us to the RESET- signal. + + Without this patch a Platinum 4 GiB CF card is not recognised + properly on boards with a TQM5200 (STK52xx, TB5200). + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit 813bea96a960916c72b4a3a7df840151529c26ce +Author: Sascha Laue <Sascha.Laue@gmx.biz> +Date: Thu Apr 3 14:43:11 2008 +0200 + + lwmon5: disable CONFIG_ZERO_BOOTDELAY + + Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> + +commit 53eec6f1d25932e76d63ccb14082792b0b96bf41 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Apr 2 08:03:58 2008 +0200 + + ds174x: Fix warning on return in rtc_get and rtc_set functions + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit a253b38bf50c85227c33ca0febc870ee49d1588e +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Apr 2 08:03:57 2008 +0200 + + cmd_log.c: Fix assignment differ in signedness + + In function 'logbuff_init_ptrs': + cmd_log.c:79: warning: pointer targets in assignment differ in signedness + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df +Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> +Date: Wed Apr 2 11:04:43 2008 +0530 + + Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c + + Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in> + +commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Tue Apr 1 14:07:10 2008 +0200 + + s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit c08fb3ea36d19b1640b7906264581e9105534399 +Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> +Date: Tue Apr 15 10:24:14 2008 +0200 + + Additional PCI IDs for IDE and network controllers + + These PCI IDs are required by the Linkstation platforms. + + Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + +commit c0559be371b2a64b1a817088c3308688e2182f93 +Author: Joakim Tjernlund <joakim.tjernlund@transmode.se> +Date: Mon Apr 14 23:01:50 2008 +0200 + + Change env_get_char from a global function ptr to a function. + + This avoids an early global data reference. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 3e0f331c05d72f140715c1e9fca991927e44d422 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Tue Apr 29 12:35:08 2008 +0000 + + Clean up smsc911x driver + + Replace direct register address derefencing with accessor functions. + Restrict explicitly 32-bit bus-width, extend affected configurations + respectively. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Tue Apr 15 00:08:20 2008 -0400 + + This patch adds a driver for the following smsc network controllers: + LAN9115 + LAN9116 + LAN9117 + LAN9215 + LAN9216 + LAN9217 + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski<lg@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3dfd4aab929cccddb63d9ea509967861e1333b52 +Author: Sascha Laue <Sascha.Laue@gmx.biz> +Date: Tue Apr 1 15:13:03 2008 +0200 + + Fix watchdog POST for lwmon5 + + If the hardware watchdog detects a voltage error, the watchdog sets + GPIO62 to low. The watchdog POST has to detect this low level. + + Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i> + +commit 24b448448a917e52806f82660a5c9d47608894fb +Author: Dave Liu <r63238@freescale.com> +Date: Tue Apr 1 15:22:11 2008 +0800 + + ata: update the libata.h from ata.h of linux kernel + + Current libata.h of u-boot is out of sync from linux kernel, + this patch make it be consistent with linux kernel. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Tor Krill <tor@excito.com> + +commit f8f9dc98883f66f59eb0601da65808e6b139c87c +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Mon Mar 31 11:59:27 2008 -0500 + + Allow use of ARCH=powerpc when building + + The linux kernel is now mostly ARCH=powerpc, so to make life easier + allow use to use ARCH=powerpc and convert it to ARCH=ppc. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Mon Mar 31 10:40:54 2008 +0900 + + Add apollon board MAINTAINERS entry + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 77e475cc0ed1832160017d364be32a0be9ff02a9 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Mon Mar 31 10:40:36 2008 +0900 + + Fix OneNAND read + + It should access with 16-bit instead of 8-bit + + Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit a9da2b41079d230db3a5641625311983f85ce1fb +Author: Kyungmin Park <kmpark@infradead.org> +Date: Mon Mar 31 10:40:19 2008 +0900 + + Fix OneNAND erase command + + It mis-calculates the block address. + Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 61525f2ffa156665a66908fda47dbf29d65ea579 +Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> +Date: Mon Mar 31 01:32:15 2008 +0200 + + Support for LinkStation / KuroBox HD and HG PPC models + + This patch is based on the port by Mihai Georgian (see linkstation.c for + Copyright information) and implements support for LinkStation / KuroBox HD + and HG PPC models from Buffalo Technology, whereby HD is deactivated at + the moment, pending network driver fixing. + + Notice to users: this is pretty much a barebone port. Support for network + on HG models is already in the U-Boot mainline, but you might also want + patches to switch fan / phy modes depending on the negotiated ethernet + parameters. This patch also doesn't support console switching, booting EM + mode, Buffalo specific ext2 magic number. So, if you want to use any of + those, you need additional patches. Otherwise this patche provides a fully + functional u-boot with a network console on your system. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Sun Mar 30 01:22:13 2008 -0500 + + Add CONFIG_MII_INIT support to related boards + + Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in + cmd_init.c. Add CONFIG_MII_INIT to board configuration files + that use mii_init() in cmd_init.c. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Sun Mar 30 01:19:06 2008 -0500 + + Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards + + Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define + CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + +commit e99ccb488181d012248c6be30b2093e950319fc5 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Mar 27 11:46:38 2008 -0500 + + Introduce phys_size_t and move phys_addr_t into asm/types.h + + Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's + that have larger physical addresses like 44x, 85xx, and 86xx. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 20a14a42a25f72e379f38460b8a8484667536795 +Author: Andy Fleming <afleming@freescale.com> +Date: Wed Apr 2 16:19:07 2008 -0500 + + Rename include/md5.h to include/u-boot/md5.h + + Some systems have md5.h installed in /usr/include/. This isn't the + desired file (we want the one in include/md5.h). This will avoid the + conflict. This fixes the host tools building problem by creating a new + directory for U-Boot specific header files. + + [Patch by Andy Fleming, modified to use separate directory by Wolfgang + Denk] + + Signed-off-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: Andy Fleming <afleming@freescale.com> + Acked-by: Timur Tabi <timur@freescale.com> + +commit f297b7a1ec87433f66320d89d993e1bc738c66b8 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Mar 27 18:51:17 2008 +0800 + + drivers: code clean up + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Mar 27 18:50:41 2008 +0800 + + drivers: clean up the ata_piix.h + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit e8f7ba404f1409606962815ecc955a06984b08b3 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Mar 27 18:49:56 2008 +0800 + + doc: english polishing for README.sata + + according to gvb's suggestion, polishing for the doc. + + Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com> + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 3e3f766a5274d204780460e1879723b565296d34 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Mar 26 18:53:28 2008 -0500 + + Fix warnings introduced by I2C bus speed setting patch + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3c735e7437150e8615f26930c7819db85634276d +Author: eran liberty <eran.liberty@gmail.com> +Date: Thu Mar 27 00:50:49 2008 +0100 + + Altera Stratix II support + + Adds Support for Altera's Stratix II. + + Within your board specific init file you will have to call + + 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); + 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); + + Altera_desc* contines (for example): + { + Altera_StratixII, /* part type */ + passive_serial, /* interface type */ + 1, /* bytes of data part can accept */ + (void *)(&funcs), /* interface function table */ + 0L, /* base interface address */ + 0 /* implementation specific cookie */ + } + + funcs is the interface. It is of type altera_board_specific_func. + It looks like this: + altera_board_specific_func func = { + pre_fn, + config_fn, + status_fn, + done_fn, + clk_fn, + data_fn, + abort_fn, + post_fn, + }; + + you will have to implement these functions, which is usually bit + banging some gpio. + + Signed-off-by: Eran Liberty <liberty@extricom.com> + +commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Apr 13 14:32:54 2008 -0700 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed Mar 26 20:41:17 2008 +0100 + + Phytec Phycore-i.MX31 support + + This patch adds support for the Phytec Phycore-i.MX31 board + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed Mar 26 20:41:09 2008 +0100 + + mx31 litekit support + + This patch adds support for the mx31 litekit board + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit cdace0661208754a53019ea0dc7b803a040e0939 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed Mar 26 20:40:49 2008 +0100 + + add an i2c driver for mx31 + + This patch adds an i2c driver for Freescale i.MX processors + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed Mar 26 20:40:42 2008 +0100 + + core support for Freescale mx31 + + This patch adds the core support for Freescale mx31 + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 7ec68862a27c8f6f6d566228de8f6724d964a939 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Apr 13 14:19:23 2008 -0700 + + Fix compile error + + ...as suggested by Peter Pearse + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 5252ed95204bdf55bec5a90ea69860bf2f78c643 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Wed Mar 26 20:40:36 2008 +0100 + + Separate omap24xx specific code from arm1136 + + Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 + to cpu/arm1136/omap24xx. + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Jan 29 18:21:05 2008 -0500 + + disable caches before booting an app for Blackfin apps + + It isn't generally save to execute applications outside of U-Boot with caches + enabled due to the way the Blackfin processor handles caches (requires + software assistance). This patch disables caches before booting an ELF or + just booting raw code. The previous discussion on the patch was that we + wanted to use weaks instead, but that proved to not be feasible when multiple + symbols are involved, which puts us back at the ifdef solution. I've + minimized the ugliness by moving the setup step outside of the main function. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Apr 13 10:03:54 2008 -0700 + + ppc: Get rid of unused machine type definitions + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Apr 13 09:59:26 2008 -0700 + + Coding Style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 7754f33c6fb7a2c050388d20bf3847038558bdcf +Author: Larry Johnson <lrj@acm.org> +Date: Thu Feb 21 13:58:11 2008 -0500 + + LM73 bug fix for negative temperatures and cleanup + + When the LM73 temperature sensor measures a temperature below 0 C, the + current driver does not perform sign extension, so the result returned is + 512 C too high. This patch fixes the problem, and does general cleanup + of the code. + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit 96ef831f713289afba19da0c8f905e99da2b23e0 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Thu Apr 3 13:36:02 2008 +0200 + + cfi_flash: Support buffered writes on non-standard Spansion NOR flash + + Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit + series require different addresses for buffered write commands. Define a + configuration option to support buffered writes on those chips. A more + elegant solution would be to automatically detect those chips by parsing + their CFI records, but that would require introduction of a fixup table + into the cfi_flash driver. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44 +Author: Lee Nipper <lee.nipper@freescale.com> +Date: Thu Apr 10 09:35:06 2008 -0500 + + mpc83xx: Update DIMM data bus width test to support 40-bit width + + 32-bit wide ECC memory modules report 40-bit width. + Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. + + Signed-off-by: Lee Nipper <lee.nipper@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5fb5a689d822ca61e814bd523fc930af335242fa +Author: Dave Liu <r63238@freescale.com> +Date: Mon Mar 31 17:05:12 2008 +0800 + + mpc83xx: Fix the bug of serdes initialization + + Currently the serdes will not be initializated due to the + partid's error. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 2000784818f043db7ca60e2846a72d097766b894 +Author: Dave Liu <r63238@freescale.com> +Date: Thu Apr 3 16:28:29 2008 +0800 + + mpc83xx: Fix the SATA clock setting of 837x targets + + Currently the SATA controller clock is configured as CSB clock, + usually the CSB clock is 400/333/266MHz. + + However, The SATA IP block is only guaranteed to operate up to + 200 MHz as stated in the HW spec. + + The bug is reported by Joe D'Abbraccio <ljd015@freescale.com> + + This patch makes the SATA clock as half of CSB clock. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Apr 2 13:41:21 2008 +0200 + + mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 97b3ecb575a92fa34c1765229dbc06f2b662f139 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Apr 9 04:20:57 2008 -0500 + + 85xx: Fix detection of MP cpu spin up + + We were looking at the wrong memory offset to determine of a secondary + cpu had been spun up or not. Also added a warning message if the + all the secondary cpus we expect don't spin up. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f3e04bdc3f360c66801a9048956e61e41a16edba +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Apr 8 10:45:50 2008 -0500 + + 85xx: Use SVR_SOC_VER instead of SVR_VER + + The recent change introduced by 'Update SVR numbers to expand support' + now requires that we use SVR_SOC_VER instead of SVR_VER if we want + to compare against a particular processor id. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7 +Author: Eugene O'Brien <eugene.obrien@advantechamt.com> +Date: Fri Apr 11 10:00:35 2008 -0400 + + ppc4xx: Fix power mgt definitions for PPC440 + + Corrected DCR addresses of PPC440EP power management registers. + + Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> + +commit 950a392464e616b4590bc4501be46e2d7d162dea +Author: Wolfgang Denk <wd@denx.de> +Date: Fri Apr 11 15:11:26 2008 +0200 + + Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18: + + Reverting became necessary after it turned out that the patches in + the u-boot-arm repo were modified, and in some cases corrupted. + + This reverts the following commits: + + 066bebd6353e33af3adefc3404560871699e9961 + 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 + c88ae20580b2b01487b4cdcc8b2a113f551aee36 + a147e56f03871bba4f05058d5e04ce7deb010b04 + d6674e0e2a6a1f033945f78838566210d3f28c95 + 8c8463cce44d849e37744749b32d38e1dfb12e50 + c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d + 8bf69d81782619187933a605f1a95ee1d069478d + 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d + a574a73852a527779234e73e17e7597fd8128882 + 1377b5583a48021d983e1fd565f7d40c89e84d63 + 1704dc20917b4f71e373e2c888497ee666d40380 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13 +Author: Stefan Roese <sr@denx.de> +Date: Fri Apr 11 07:02:29 2008 +0200 + + ppc4xx: Update Kilauea defconfig to use device-tree booting as default + + This patch reworks the default environment on Kilauea/Haleakala. Now + "net_nfs" for exmaple uses the device-tree style booting formerly know + as "net_nfs_fdt". Also the addresses in RAM were changed because of the + new image booting support, which check for image overwriting. So the + addresses needed togeet adjusted. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28 +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 9 11:58:02 2008 +0200 + + ppc4xx: Fix Canyonlands default environment to work with new image support + + Since the new image support checks for image overwriting, the default + environment needs to get adjusted to use correct addresses. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit dfc6c7b647dba7ab86749616f0e9e5740deed422 +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 9 11:54:11 2008 +0200 + + ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE + + The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step + closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But + on 4xx systems _start currently cannot be used for this calculation. + So revert back to the original version for now. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f91374f65eae8b42cac329e06ba1c54728278efb +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 12:49:52 2008 +0100 + + microblaze: Sort microblaze boards in MAKEALL script + +commit 62032deb7214c6d9b4396297e2aaa559bc2f8495 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 11:58:45 2008 +0100 + + microblaze: clean microblaze_config.mk + + FLAGS are generated by U-BOOT generator. + Board specific FLAGS are in board directory + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit cf5c679ca04a6b54bf53a55b8b9c29335b387287 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 12:47:19 2008 +0100 + + microblaze: xupv2p fix config file for supporting FDT + +commit 188dc16b189143573b1ed90e584bf866d75cdd12 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 11:53:02 2008 +0100 + + microblaze: ml401 fix config file for supporting FDT + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 4c6a6f02e239236261333759997eeaf86b30b54c +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 11:22:48 2008 +0100 + + microblaze: ml401 - add ifdef for GPIO + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 12:13:03 2008 +0100 + + microblaze: clean uart16550 and uartlite handling + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 0b20f250877441460fb79d72192954abe8498834 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 11:08:31 2008 +0100 + + microblaze: Add Emaclite driver to Makefile + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 868cde5310f88234b774878e4f06e79df10a88b3 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 11:08:01 2008 +0100 + + microblaze: Add Emac driver to Makefile + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 6f961b4f461f6cbb83a467d468a02e6078c2b327 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 12:42:29 2008 +0100 + + microblaze: add Emac ethernet driver + +commit 89c53891b18cbafd29ab8931b40e27ad231b6085 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 12:41:56 2008 +0100 + + microblaze: add Emaclite ethernet driver + +commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 11:04:01 2008 +0100 + + microblaze: ML401 and XUPV2P remove emac and emaclite reference + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 10:59:32 2008 +0100 + + microblaze: remove old setting for emac driver + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57 +Author: Michal Simek <monstr@monstr.eu> +Date: Fri Mar 28 10:58:15 2008 +0100 + + microblaze: Clean Makefile from ancient emac driver + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit ab68f921d9c741830f721c3d879c13a0c5597183 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 10:20:43 2008 +0100 + + SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 6ed8a43a19bb0275501bc286007daafa923552cf +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Wed Mar 26 23:38:48 2008 +0100 + + SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Wed Mar 26 23:34:47 2008 +0100 + + SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 823edd8a66ed50af5aaba0c79567f67061e4d79a +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 10:06:52 2008 +0100 + + SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Wed Mar 26 23:26:48 2008 +0100 + + SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit b330990c2f36ee4a8bb318360e1c8ba965269ab6 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 10:00:33 2008 +0100 + + SPARC: Added support for SPARC LEON2 SOC Processor. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Wed Mar 26 23:00:38 2008 +0100 + + SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Wed Mar 26 22:51:29 2008 +0100 + + SPARC: Added support for SPARC LEON3 SOC processor. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit bf3d8b31169546fcddb4737391e1893fb12d033a +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 08:29:26 2008 +0100 + + SPARC: added SPARC support for new uimage in common code. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 00ab32c85405a4fe65fd4128243086210fc90a21 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Wed Mar 26 22:36:03 2008 +0100 + + SPARC: added SPARC board information to the command bdinfo. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit c2f02da21a3f37f0878554eebc785e04fdc4e128 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 09:47:00 2008 +0100 + + SPARC: Added generic support for SPARC architecture. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit e54ec0f016803e4d9524ff71f7971bda0c51b287 +Author: Stefan Roese <sr@denx.de> +Date: Thu Apr 3 14:50:34 2008 +0200 + + ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3 + + This patch fixes a problem with the RGMII setup of the 460GT. The 460GT + has 2 RGMII instances and we need to configure the 2nd RGMII instance + for the EMAC2+3 channels. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c2a545ce33b26d80337f80b533828839249fb1c9 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Apr 2 08:03:56 2008 +0200 + + MPC8xx: Fix libfdt support introduced in commit 77ff7b74 + + fdt.c: In function 'ft_cpu_setup': + fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32' + fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32' + fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet' + fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b +Author: Andy Fleming <afleming@freescale.com> +Date: Mon Mar 31 20:45:56 2008 -0500 + + Fix fdt set command to conform to dts spec + + The fdt set command was treating properties specified as <00> and <0011> + as byte streams, rather than as an array of cells. As we already have + syntax for expressing the desire for a stream of bytes ([ xx xx ...]), + we should use the <> syntax to describe arrays of cells, which are always + 32-bits per element. If we imagine this likely (IMHO) scenario: + + > fdt set /ethernet-phy@1 reg <1> + + With the old code, this would create a bad fdt, since the reg cell would be + made to be one byte in length. But the cell must be 4 bytes, so this would + break mysteriously. + + Also, the dts spec calls for constants inside the angle brackets (<>) + to conform to C constant standards as they pertain to base. + Take this scenario: + + > fdt set /ethernet@f00 reg <0xe250000\ 0x1000> + + The old fdt command would complain that it couldn't parse that. Or, if you + wanted to specify that a certain clock ran at 33 MHz, you'd be required to + do this: + + > fdt set /mydev clock <1f78a40> + + Whereas the new code will accept decimal numbers. + + While I was in there, I extended the fdt command parser to handle property + strings which are split across multiple arguments: + + > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 > + > fdt p /ethernet@f00 + ethernet@f00 { + interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>; + }; + + Lastly, the fdt print code was rearranged slightly to print arrays of cells + if the length of the property is a multiple of 4 bytes, and to not print + leading zeros. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56 +Author: Stefan Roese <sr@denx.de> +Date: Wed Apr 2 08:39:33 2008 +0200 + + ppc4xx: Canyonlands: Init SATA/PCIe port correctly + + Canyonlands (460EX) shares the first PCIe interface with the SoC SATA + interface. This usage can be configured with the jumper J6. This patch + correctly configures the SATA/PCIe PHY for SATA usage when this jumper + is installed. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6fe2946f198481254a6ee9600d7456b8316a4083 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Mar 28 17:37:49 2008 -0500 + + remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code + + finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, + "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" + started. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b5873f1732b92a25690e1513b90dfb0d644f6697 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Tue Apr 1 07:30:51 2008 +0200 + + dataflash: Move CONFIG_HAS_DATAFLASH to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 2d934ea51f276522b532f870a820e844ff480b5b +Author: Tor Krill <tor@excito.com> +Date: Fri Mar 28 15:29:45 2008 +0100 + + Add Vitesse 8601 support to TSEC driver + + Add phy_info for Vitesse VSC8601. + Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. + + Signed-off-by: Tor Krill <tor@excito.com> + Reviewed-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Mon Mar 31 14:25:00 2008 +0000 + + SPARC: added SMC91111 driver in and out macros for LEON processors. + + This patch makes SPARC/LEON processors able to read and write + to the SMC91111 chip using the chip external I/O bus of the memory + controller. This patchs defines the standard in and out macros + expected by the SMC9111 driver. + + To access that I/O bus one must set up the memory controller + (MCTRL or FTMCTRL) correctly. It is assumed that the user sets + up this correctly when the other MCTRL parameters are set up. It + can be set up from the board configuration header file. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 18:52:34 2008 +0100 + + Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Mar 31 21:31:04 2008 +0200 + + AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 18:52:33 2008 +0100 + + Add support for AT91SAM9260EK + + Support for booting from internal DataFlash, external DataFlash card + or NAND flash is available. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 1762f13b4aab88b685b1722f17dada247945624b +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Mar 31 21:20:49 2008 +0200 + + AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 761712188b353494defb2b644491ff73d0daaa6f +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Mon Mar 31 21:12:17 2008 +0200 + + AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 20:52:32 2008 +0100 + + Port AT91CAP9 to the new headers + + Adapt the existing AT91CAP9 code to the new headers and APIs. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 19:52:31 2008 +0100 + + Finish header files reworking + + Replace AT91CAP9.h file with several splitted header files coming + from the Linux kernel. + + This is part 2 of the replacement: more header imports and edits. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 19:52:30 2008 +0100 + + Import several header files from Linux + + Replace AT91CAP9.h file with several splitted header files coming + from the Linux kernel. + + This is part 1 of the replacement: pristine header files import. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit a8a78f2d99dc1bd30dc3595da118539b506c6118 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 20:52:28 2008 +0100 + + Move at91cap9 specific files to at91sam9 directory + + AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a + common infrastructure can be used. Let this infrastructure be + named after the AT91SAM9 family, and move the existing AT91CAP9 + files to the new place. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 61106a565870ff503f92b251b94bd7afef889a04 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 21:52:27 2008 +0100 + + Use timer_init() instead of board supplied interrupt_init() + + The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by + the board, so use timer_init() instead of interrupt_init(). + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 5604e2178c5218fbfdba2e4293ca7652e829ac25 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 21:52:36 2008 +0100 + + Cleanup DataFlash partition handling + + DataFlash partition information has become a mess. This patch + defines a single partition scheme for Atmel DataFlashes. This partition + scheme will be used by all AT91CAP9 and AT91SAM9 boards. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Fri Mar 28 08:47:45 2008 -0500 + + ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S + + When the version_string function in start.S is not 4-byte align, + it will cause the compiler generates "unaligned opcodes detected + in executable segment". This issue affects all ColdFire CPUs. + By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if + it is not aligned. + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit bae61eefe15b4d454060a7140e49ae58322be803 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Mar 25 15:41:15 2008 -0500 + + ColdFire: Add dspi and serial flash support for MCF5445x + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 48ead7a7a922fceaf494e352abfab8216a41b417 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Tue Mar 18 17:37:01 2008 -0500 + + ColdFire: Remove R5200 board + + This board never went into production + + Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com> + Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8 +Author: Matthew Fettke <[matthew.fettke@gmail.com]> +Date: Thu Jan 24 14:02:32 2008 -0600 + + ColdFire: Added M5275EVB support. + + Signed-off-by: Matthew Fettke <mfettke@videon-central.com> + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b +Author: Matthew Fettke <[matthew.fettke@gmail.com]> +Date: Mon Feb 4 15:38:20 2008 -0600 + + ColdFire: Added MCF5275 cpu support. + + Signed-off-by: Matthew Fettke <mfettke@videon-central.com> + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Mon Mar 17 12:14:11 2008 -0500 + + ColdFire: Define bootdelay in configuration file for M52277EVB + + Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com> + Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 77878f16cedee17161ff2336990970fffc6cea35 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Mon Mar 17 12:09:07 2008 -0500 + + ColdFire: Fix second memory Chipselect for M5475EVB + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit 43d60642395a550956cb21d287c8cfa563913d28 +Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> +Date: Thu Mar 13 14:26:32 2008 -0500 + + ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282 + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Acked-by: John Rigby <jrigby@freescale.com> + +commit eb14ebe813a0cb5d47905228da446a5ad692473b +Author: Larry Johnson <lrj@acm.org> +Date: Sun Mar 30 20:33:04 2008 -0500 + + ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit 02e3892021112f21067d9ed1d04ae4182725ba52 +Author: Stefan Roese <sr@denx.de> +Date: Mon Mar 31 12:20:48 2008 +0200 + + ppc4xx: Small whitespace fix of esd patches + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 034394abb524785047c815f00dde8cdbdc1593c5 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Mar 30 18:52:44 2008 +0200 + + ppc4xx: Cleanup PMC440 board support + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit a6cc6c37188d85c25d167a4515da86f48d9a583e +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Mar 30 18:52:06 2008 +0200 + + ppc4xx: Add ptm configuration variables for PMC440 + + Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms + environment variables. + + Cleanup pci_target_init. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit 7c91f51a2fe296909147f1646a1412729dd10b1d +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Sun Mar 30 18:01:15 2008 +0200 + + ppc4xx: Minor updates for DU440 boards + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + +commit d5bffeb868d6b4d462f558dac43011027b6644b7 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:54:20 2008 -0500 + + Blackfin: cleanup and overhaul common board init functions + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit b86b3416f874358acaf07519e7620cdb2145f75b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:50:58 2008 -0500 + + Blackfin: cleanup lib_blackfin/cache.c + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Mar 30 15:46:13 2008 -0400 + + Blackfin: unify cpu and boot modes + + All of the duplicated code for Blackfin processors and boot modes have been + unified. After all, the core is the same for all processors, just the + peripheral set differs (which gets handled in the drivers). + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 880cc4381ea8360248cddcdf87a64566745a5724 +Author: Stelian Pop <stelian@popies.net> +Date: Wed Mar 26 22:52:35 2008 +0100 + + Fix CFG_NO_FLASH compilation. + + Many Atmel boards have no "real" (NOR) flash on board, and rely only + on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to + be present in a board configuration file, while still enabling flash + commands like 'flinfo', 'protect', etc. + + Signed-off-by: Stelian Pop <stelian@popies.net> + +commit 9ce7e53abd039decea1af67aec81bbd5df7a2593 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:58:13 2008 -0500 + + Blackfin: BF537-stamp: cleanup spi flash driver + + This punts the old spi flash driver for a new/generalized one until the + common one can be integrated. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Sun Mar 30 11:34:34 2008 -0400 + + Fix macro typo in common/cmd_mii.c + + This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I + actually applied the wrong patch. + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Mar 30 16:39:53 2008 +0200 + + use correct at91rm9200 register name in m501sk board + + This fixes a naming bug for at91rm9200 lowlevel init code: + NOR boot flash is on chipselect 0, not chipselect 2. This + makes code use the register name from chip datasheets. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 480ed1dea103a1c8f4591afc77d2de3c7868d983 +Author: David Brownell <david-b@pacbell.net> +Date: Fri Jan 18 12:55:00 2008 -0800 + + use correct at91rm9200 register name + + This fixes a naming bug for at91rm9200 lowlevel init code: + NOR boot flash is on chipselect 0, not chipselect 2. This + makes code use the register name from chip datasheets. + + Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> + +commit a3543d6dc52b0ba9c64016687cf32d600b31a476 +Author: David Brownell <david-b@pacbell.net> +Date: Fri Jan 18 12:45:45 2008 -0800 + + add missing ARM boards to MAKEALL + + Add some missing ARM boards to MAKEALL. These build correctly, + unlike several of the boards already listed. + + Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> + +commit 066bebd6353e33af3adefc3404560871699e9961 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Sun Mar 30 11:34:09 2008 +0100 + + Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c + to prevent compilation error. + + Signed-off-by: Peter Pearse <peter.pearse@arm.com> + +commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 +Author: Guennadi Liakhovetski <[lg@denx.de]> +Date: Sun Mar 30 11:32:30 2008 +0100 + + Support for the MX31ADS evaluation board from Freescale + + This patch adds support for the MX31ADS evaluation board from Freescale, + initialization code is copied from RedBoot sources, also provided by Freescale. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit c88ae20580b2b01487b4cdcc8b2a113f551aee36 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Sun Mar 30 11:32:27 2008 +0100 + + Phytec Phycore-i.MX31 support + + This patch adds support for the Phytec Phycore-i.MX31 board + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit a147e56f03871bba4f05058d5e04ce7deb010b04 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Sun Mar 30 11:32:24 2008 +0100 + + mx31 litekit support + + This patch adds support for the mx31 litekit board + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit d6674e0e2a6a1f033945f78838566210d3f28c95 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Sun Mar 30 11:32:21 2008 +0100 + + add SMSC LAN9x1x Network driver + + This patch adds a driver for the following smsc network controllers: + LAN9115 + LAN9116 + LAN9117 + LAN9215 + LAN9216 + LAN9217 + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 8c8463cce44d849e37744749b32d38e1dfb12e50 +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Sun Mar 30 11:32:16 2008 +0100 + + add an i2c driver for mx31 + + This patch adds an i2c driver for Freescale i.MX processors + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Sun Mar 30 11:30:43 2008 +0100 + + core support for Freescale mx31 + + This patch adds the core support for Freescale mx31 + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 8bf69d81782619187933a605f1a95ee1d069478d +Author: Sascha Hauer <s.hauer@pengutronix.de> +Date: Sun Mar 30 11:28:46 2008 +0100 + + Separate omap24xx specific code from arm1136 + + Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. + + Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d +Author: Peter Pearse <peter.pearse@arm.com> +Date: Sun Mar 30 11:23:05 2008 +0100 + + Add pmdra into MAKEALL + + Signed-off-by: Peter Pearse <peter.pearse@arm.com> + +commit a574a73852a527779234e73e17e7597fd8128882 +Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> +Date: Sun Mar 30 11:21:58 2008 +0100 + + Adds support for the Prodrive PMDRA board, based on a DM6441 + + Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> + +commit 1377b5583a48021d983e1fd565f7d40c89e84d63 +Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> +Date: Sun Mar 30 11:11:34 2008 +0100 + + Removes all board specific code from the arch. part for DM644x (DaVinci) boards + + Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> + +commit 1704dc20917b4f71e373e2c888497ee666d40380 +Author: Dirk Behme <dirk.behme@gmail.com> +Date: Sun Mar 30 11:09:01 2008 +0100 + + - Remove *_masked() functions as noted by Wolfgang + - Adapt register naming to recent TI spec (sprue26, March 2007) + - Fix reset_timer() handling + - As reported by Pieter [1] the overflow fix introduced a + delay of factor 16 (e.g 2 seconds became 32). While the + overflow fix is basically okay, it missed to divide udelay by + 16, too. Fix this. + [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 + - Remove software division of timer count value (DIV(x) + macro) and do it in hardware (TIM_CLK_DIV). + Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> + and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for + the hints & testing! + + Signed-off-by: Dirk Behme <dirk.behme@gmail.com> + + Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> + +commit ac3315c26e143c31680750c9c13f027efbcc887e +Author: Andre Schwarz <andre.schwarz@matrix-vision.de> +Date: Thu Mar 6 16:45:44 2008 +0100 + + new PHY @ e1000 - 2nd try + + Add 82541ER device with latest integrated IGP2 PHY. + Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom. + + Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 20:22:53 2008 +0100 + + SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. + + GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without + a debug link (EDCL). The GRETH core is documented in GRIP.pdf + available at www.gaisler.com. + + If the GRETH has GigaBit support (GBIT, Scatter gather, checksum + offloading etc.) can be determined by a bit in the control register. + The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 233a8bcd94997f3f345833a3b82e836222f2a206 +Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> +Date: Mon Mar 17 17:08:22 2008 -0500 + + Add CONFIG_MII_INIT in cmd_mii.c + + Provide common configuration in do_mii() to execute mii_init() + for all cpu architectures + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit f605479de2deb11e834f31dfdb0af107c86aced6 +Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com> +Date: Mon Mar 17 17:08:16 2008 -0500 + + ColdFire: Fix FEC transmit issue for MCF5275 + + Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746 +Author: Aras Vaichas <arasv@magtech.com.au> +Date: Wed Mar 26 09:43:57 2008 +1100 + + DHCP request fix for Windows Server 2003 + + Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional + delay before sending "DHCP Request" in net/bootp.c. Required to overcome + interoperability problems with Windows Server 200x DHCP server when U-Boot + client responds too fast for server to handle. + + Signed-off-by: Aras Vaichas <arasv@magtech.com.au> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 97bf85d784fbed485e652eb907589ad0d5cb7262 +Author: Daniel Hellstrom <daniel@gaisler.com> +Date: Fri Mar 28 20:40:19 2008 +0100 + + MTD/CFI: flash_read64 is defined a weak function (for SPARC) + + SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. + SPARC CPUs implement flash_read64 which calls __raw_readq. + + For current SPARC architectures (LEON2 and LEON3) each read from the + FLASH must lead to a cache miss. This is because FLASH can not be set + non-cacheable since program code resides there, and alternatively disabling + cache is poor from performance view, or doing a cache flush between each + read is even poorer. + + Forcing a cache miss on a SPARC is done by a special instruction "lda" - + load alternative space, the alternative space number (ASI) is processor + implementation spcific and can be found by including <asm/processor.h>. + + Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> + +commit 70431e8a7393b6b793f77957f95b999fc9a269b8 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Fri Mar 28 15:41:25 2008 +0100 + + Make MPC83xx one step closer to full relocation. + + Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx + and use GOT relative reference. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5b2793a3f3de34d439232b05acc8af67a028fd35 +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 27 14:34:43 2008 -0400 + + mpc8323erdb: fix EEPROM page size and get MAC from EEPROM + + This patch fixes eeprom page size so that you can now write more than + 64 bytes at a time. + + It also makes the board take MAC addresses, if found, from EEPROM. + + User should place up to 4 addresses at offset 0x7f00, for + eth{,1,2,3}addr. Any unused addresses should be zero. This group of + four six-byte values should have it's CRC at the end. crc32 and + eeprom commands can be used to accomplish this. + + If CRC fails, MAC addresses come from the environment. If CRC + succeeds, the environment is overwritten at startup. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 8f325cff31f6e745e6540014b131b9a97f61944c +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Fri Mar 28 15:15:38 2008 -0400 + + mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE + + Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB + controller on the PCI bus in Linux on the MPC8323ERDB. + + This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's + config file. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Mar 28 10:19:07 2008 -0500 + + mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code + + in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, + 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing + and processor ID display. Add REVID_{MAJ,MIN}OR macros to make + REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR + convenience macros. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Mar 28 10:18:53 2008 -0500 + + mpc83xx: display ddr frequency in board_add_ram_info banner + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Mar 28 10:18:40 2008 -0500 + + mpc83xx: unreinvent mem_clk + + delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to + mem_*_clk for consistency's sake. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Fri Mar 28 14:31:23 2008 -0500 + + mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:57:19 2008 +0800 + + mpc83xx: enable the SATA interface on mpc837xemds board + + Enable the first two SATA interfaces on MPC837xEMDS board, + The two SATA ports are on LYNX1. (SATA0/1 on J4/5) + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:56:36 2008 +0800 + + mpc83xx: initialize serdes for MPC837xEMDS boards + + This patch is stolen from Anton Vorontsov's patch + for mpc837xerdb boards. + + The reference clk and xcorevdd voltage of serdes1/2 + is same between mpc837xemds and mpc837xerdb. + + 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE + 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE + 8379E: LYNX1- 2 SATA LYNX2- 2 SATA + + Signed-off-by: Dave Liu <daveliu@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit cc8e839abc80887ae832767b5930d40edd6d7eb7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Mar 28 14:09:04 2008 +0100 + + ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision + + Canyonlands (460EX) shares the first PCIe interface with the SoC SATA + interface. This usage can be configured with the jumper J6. This patch + displays the current configuration upon bootup and changes the PCIe + init loop, to only initialize the availabel PCIe slots. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 90447ecbbac8572457b6d8903073ac3f120995ba +Author: Tor Krill <tor@excito.com> +Date: Fri Mar 28 11:29:10 2008 +0100 + + MTD/CFI: Add support for 16bit legacy AMD flash + + Add entry for 512Kx16 AMD flash to jedec_table. + Read out 16bit device id if chipwidth is 16bit. + Fixed coding style after Stefans feedback + + Signed-off-by: Tor Krill <tor@excito.com> + +commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e +Author: Stefan Roese <sr@denx.de> +Date: Fri Mar 28 11:02:53 2008 +0100 + + ppc: Small change to CFG_MEM_TOP_HIDE description + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Thu Mar 27 15:44:12 2008 +0900 + + sh: Add support stat structure and stat.h + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09 +Author: Mark Jonas <toertel@gmail.com> +Date: Sat Mar 22 19:27:52 2008 +0100 + + sh: Removed warning when compiling drivers/serial/serial_sh.c. + + Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit f309fa38929ffba71230c02330ffa42f4bba6333 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Mar 12 18:02:57 2008 +0900 + + sh: Remove disable_ctrlc function from R7780MP + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Mar 12 17:55:15 2008 +0900 + + sh: Add maintainer of R7780MP to MAINTAINER file + + Update MAINTAINER entry for R7780MP. And fix maintainer's name. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit f5e2466f7baa887a7df0c536333eea8231333497 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Tue Mar 25 17:11:24 2008 +0900 + + sh: Add support Renesas Solutions R2D plus board + + R2D plus is SH reference board used with SH7751R. + This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, + one PCI bus, VGA, and two Ethernet controller. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit e92c95180bb5bc5fd4051598a9d60beaba48988d +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Mar 12 12:15:29 2008 +0900 + + sh: Add support SH4 cache control + + Add support SH4 cache control and flash_cache function + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 28e5efde4d925fcb34901d0030d0648de2da7e89 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Mon Mar 24 01:53:01 2008 +0900 + + sh: Add support PCI host driver for SH7751/SH7751R + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Mon Mar 24 02:11:26 2008 +0900 + + sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 566933278101c144d75361ea682678a326c1290d +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Wed Mar 12 12:10:28 2008 +0900 + + sh: Add support SuperH SH7751/SH7751R + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 3313e0e26224fc9a0c445124f3455058c696df84 +Author: Mark Jonas <toertel@gmail.com> +Date: Mon Mar 10 11:37:10 2008 +0100 + + sh: Added support for SH7720 based board MPR2. + + Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Thu Mar 6 14:05:53 2008 +0900 + + sh: Fix receive FIFO level register of SH4A + + Receive FIFO level register is different in SH4A. + Because register is different, cannot occasionally receive data. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit c133c1fb0b590662206b0eba70f4478ee0300a9a +Author: Yusuke Goda <goda.yusuke@renesas.com> +Date: Tue Mar 11 12:55:12 2008 +0900 + + sh: Add support Renesas Solutions R7780MP + + Renesas Solutions R7780MP is a reference board on SH7780. + This board has serial, 10/100 base Ethernet deivice, CF slot + and VGA devices. This board can set extension board. + Extension board has 10/100/1000 base Ethernet device, PCI slot, + S-ATA, iDVR slot. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28 +Author: Yusuke Goda <goda.yusuke@renesas.com> +Date: Wed Mar 5 14:30:02 2008 +0900 + + sh: Add support PCI of SuperH and SH7780 + + This patch add support PCI of SuperH base code and SH7780 specific code. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit b55523efff2ae11f0b9ae3cc405893c32eb78156 +Author: Yusuke Goda <goda.yusuke@renesas.com> +Date: Wed Mar 5 14:23:26 2008 +0900 + + sh: Add support SH7780 + + SH7780 is CPU of Renesas Technology. + This CPU has + - CPU clock 400MHz + - PCI support + - DDR-SDRAM controller + - etc ... + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit c2042f5952a686c414031309b8f244513bf578f0 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Fri Jan 25 20:46:36 2008 +0900 + + sh: Add support Renesas Solutions Migo-R board + + Migo-R is a board based on SH7722 and has may devices. + In this patch, supported SCIF, NOR flash and Ethernet. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 74d1e66d22dac91388bc538b2fe19f735edc5b82 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 27 15:06:40 2008 +0100 + + Fix host tool build breakage, take two + + Revert commit 87c8431f and fix build breakage so that the build continues + to work on FC systems. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 09:36:47 2008 +0100 + + ppc4xx: Enable ECC on LWMON5 + + Since all ECC related problems seem to be resolved on LWMON5, this patch + now enables ECC support. + + We have to write the ECC bytes by zeroing and flushing in smaller + steps, since the whole 256MByte takes too long for the external + watchdog. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb +Author: Larry Johnson <lrj@acm.org> +Date: Mon Mar 17 11:10:35 2008 -0500 + + ppc4xx: Updates to Korat-specific code + + This patch contains updates for changes for the Korat PPC440EPx board. + These changes include: + + (1) Support for "permanent" and "upgradable" copies of U-Boot, as + described in the new "doc/README.korat" file; + + (2) a new memory map for the registers in the board's CPLD; + + (3) a revised format for manufacturer's data in serial EEPROM; and + + (4) changes to track updates to U-Boot for the Sequoia board. + + Signed-off-by: Larry Johnson <lrj@acm.org> + +commit f766cdf89b3a2a7634b8c5869f606150e332036c +Author: Markus Brunner <super.firetwister@gmail.com> +Date: Thu Mar 27 10:46:25 2008 +0100 + + ppc4xx: PPC405EP Set EMAC noise filter bits + + This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 + which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally + disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. + + Signed-off-by: Markus Brunner <super.firetwister@gmail.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991 +Author: Mike Nuss <mike@terascala.com> +Date: Wed Feb 20 11:54:20 2008 -0500 + + ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx + + On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured + after startup to change the speed of the clocks. This patch adds the + option CFG_PLL_RECONFIG. If this option is set to 667, the CPU + initialization code will reconfigure the PLL to run the system with a CPU + frequency of 667MHz and PLB frequency of 166MHz, without the need for an + external EEPROM. + + Signed-off-by: Mike Nuss <mike@terascala.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Thu Mar 27 09:12:40 2008 +0100 + + new-image: Fix host tool build breakage + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 6fb4b640562a10daff0dbe537638d511b5b48650 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 27 10:24:03 2008 +0100 + + ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9462732a3ec551c11862450902cd8ee1bedea6d9 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 10:23:43 2008 +0100 + + ppc4xx: Add fdt support to Prodrive alpr + + Since this board will probably be ported to arch/powerpc in the + near future, we add device tree support now. This way we are + "ready" for arch/powerpc from now on. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150 +Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl> +Date: Mon Mar 17 09:27:56 2008 +0100 + + ppc4xx: Enable cache support on the ALPR board + + Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl> + +commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 26 10:14:11 2008 +0100 + + ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" + + If CFG_MEM_TOP_HIDE is defined in the board config header, this specified + memory area will get subtracted from the top (end) of ram and won't get + "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel + should gets passed the now "corrected" memory size and won't touch it + either. This should work for arch/ppc and arch/powerpc. Only Linux board + ports in arch/powerpc with bootwrapper support, which recalculate the + memory size from the SDRAM controller setup, will have to get fixed + in Linux additionally. + + This patch enables this config option on some PPC440EPx boards as a workaround + for the CHIP 11 errata. Here the description from the AMCC documentation: + + CHIP_11: End of memory range area restricted access. + Category: 3 + + Overview: + The 440EPx DDR controller does not acknowledge any + transaction which is determined to be crossing over the + end-of-memory-range boundary, even if the starting address is + within valid memory space. Any such transaction from any PLB4 + master will result in a PLB time-out on PLB4 bus. + + Impact: + In case of such misaligned bursts, PLB4 masters will not + retrieve any data at all, just the available data up to the + end of memory, especially the 440 CPU. For example, if a CPU + instruction required an operand located in memory within the + last 7 words of memory, the DCU master would burst read 8 + words to update the data cache and cross over the + end-of-memory-range boundary. Such a DCU read would not be + answered by the DDR controller, resulting in a PLB4 time-out + and ultimately in a Machine Check interrupt. The data would + be inaccessible to the CPU. + + Workaround: + Forbid any application to access the last 256 bytes of DDR + memory. For example, make your operating system believe that + the last 256 bytes of DDR memory are absent. AMCC has a patch + that does this, available for Linux. + + This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: + lwmon5, korat, sequoia + + The other remaining 440EPx board were intentionally not included + since it is not clear to me, if they use the end of ram for some + other purpose. This is unclear, since these boards have CONFIG_PRAM + defined and even comments like this: + + PMC440.h: + /* esd expects pram at end of physical memory. + * So no logbuffer at the moment. + */ + + It is strongly recommended to not use the last 256 bytes on those + boards too. Patches from the board maintainers are welcome. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 27 10:09:05 2008 +0100 + + ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT) + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d56a3ce179688cde61073a3690e21703d68fafd7 +Author: Stefan Roese <sr@denx.de> +Date: Tue Mar 25 17:51:13 2008 +0100 + + ppc4xx: Correctly pass phyiscal FLASH base address into dtb + + The routine ft_board_setup() configures the EBC NOR mappings for the + Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from + 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS + problem, we need to pass the corrected address here too. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9ad31989de12ce5c67b07c4867ead47465655c4b +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 16:35:12 2008 +0100 + + ppc4xx: Fix compilation warning in 4xx_enet.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 4c9e855734c523900322a7c3cdd9099b4f51b51d +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 16:20:49 2008 +0100 + + ppc4xx: Add AMCC Glacier 406GT eval board support + + This patch adds support for the AMCC Glacier 460GT eval board. + The main difference to the Canyonlands board are listed here: + + - 4 ethernet ports instead of 2 + - no SATA port + - no USB port + + Currently EMAC2+3 are not working. This will be fixed in a later + release. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d8bd643141af4710d7f1b69bbab6b760de0af0a1 +Author: Stefan Roese <sr@denx.de> +Date: Thu Mar 27 08:47:26 2008 +0100 + + ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b9670dd85be6e0496ef2e231043c23cad9b1d903 +Author: Anatolij Gustschin <agust@denx.de> +Date: Wed Mar 26 21:05:43 2008 +0100 + + Fix out of tree building issue + + Currently U-Boot building in some external directory + doesn't work. This patch tries to fix the problem. + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit d4ee711d8a5c366ee3f857c26b927d12e66614ff +Author: Anatolij Gustschin <agust@denx.de> +Date: Wed Mar 26 18:13:33 2008 +0100 + + README: update documentation (availability, links, etc.) + + Fix typo in README + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f +Author: Anatolij Gustschin <agust@denx.de> +Date: Wed Mar 26 17:47:44 2008 +0100 + + Fix compilation error in cmd_usb.c + + This patch fixes compilation error + cmd_usb.c: In function 'do_usb': + cmd_usb.c:552: error: void value not ignored as it ought to be + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + +commit d8c82db482d6b535d12b419d6440b88bf7091c9b +Author: Timur Tabi <timur@freescale.com> +Date: Fri Mar 14 17:45:29 2008 -0500 + + Add support for setting the I2C bus speed in fsl_i2c.c + + Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying + the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, + but fsl_i2c.c ignores it and uses conservative value when programming the + I2C bus speed. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Andy Fleming <afleming@freescale.com> + +commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Mar 27 00:03:57 2008 +0100 + + Coding style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:55:32 2008 +0800 + + drivers: add the support for Freescale SATA controller + + Add the Freescale on-chip SATA controller driver to u-boot, + The SATA controller is used on the 837x and 8315 targets, + The driver can be used to load kernel, fs and dtb. + + The features list: + - 1.5/3 Gbps link speed + - LBA48, LBA28 support + - DMA and FPDMA support + - Two ports support + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit bede87f4c87c3ccd868cc60ebf792e0560c6d024 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:54:44 2008 +0800 + + ata: add the readme for SATA command line + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit cd54081cd479e542fc399b8a40651ff11a1ad849 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:53:24 2008 +0800 + + ata: enable the sata initialize on boot up + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 69386383c5c2b323c66495b0b0cef6a9714d83bf +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:52:36 2008 +0800 + + ata: add the fis struct for SATA + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:51:44 2008 +0800 + + ata: add the libata support + + add simple libata support in u-boot + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 8e9bb43429e50df55fa41932cbe65841ff579220 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:50:45 2008 +0800 + + ata: make the ata_piix driver using new SATA framework + + original ata_piix driver is using IDE framework, not real + SATA framework. For now, the ata_piix driver is only used + by x86 sc520_cdp board. This patch makes the ata_piix driver + use the new SATA framework, so + + - remove the duplicated command stuff + - remove the CONFIG_CMD_IDE define in the sc520_cdp.h + - add the CONFIG_CMD_SATA define to sc520_cdp.h + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:49:44 2008 +0800 + + ata: add the support for SATA framework + + - add the SATA framework + - add the SATA command line + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:48:18 2008 +0800 + + ata: merge the header of ata_piix driver + + move the sata.h from include/ to drivers/block/ata_piix.h + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit 9eef62804d9695425b24c87b46a61a7fa74afee0 +Author: Dave Liu <r63238@freescale.com> +Date: Wed Mar 26 22:47:06 2008 +0800 + + ata: merge the ata_piix driver + + move the cmd_sata.c from common/ to drivers/ata_piix.c, + the cmd_sata.c have some part of ata_piix controller drivers. + consolidate the driver to have better framework. + + Signed-off-by: Dave Liu <daveliu@freescale.com> + +commit b9e749e95354f33eb5dc6653c6db7d502adb95fe +Author: Markus Klotzbuecher <mk@denx.de> +Date: Wed Mar 26 18:26:43 2008 +0100 + + USB, Storage: fix a bug introduced in commit + f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info + to only print only information on one storage device, but not for + multiple. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360 +Author: Anatolij Gustschin <agust@denx.de> +Date: Wed Mar 26 17:47:44 2008 +0100 + + Fix compilation error in cmd_usb.c + + This patch fixes compilation error + cmd_usb.c: In function 'do_usb': + cmd_usb.c:552: error: void value not ignored as it ought to be + + Signed-off-by: Anatolij Gustschin <agust@denx.de> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Mar 26 08:53:53 2008 -0500 + + 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page + + Provide a board_lmb_reserve helper function to ensure we reserve + the page of memory we are using for the boot page translation code. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 79679d80021ab095e639e250ca472fe526da02e2 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Mar 26 08:34:25 2008 -0500 + + 85xx: Update multicore boot mechanism to ePAPR v0.81 spec + + The following changes are needed to be inline with ePAPR v0.81: + + * r4, r5 and now always set to 0 on boot release + * r7 is used to pass the size of the initial map area (IMA) + * EPAPR_MAGIC value changed for book-e processors + * changes in the spin table layout + * spin table supports a 64-bit physical release address + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 25eedb2c1958a13110c7de1fc809b624053cc69c +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 19 15:02:07 2008 -0500 + + FSL: Clean up board/freescale/common/Makefile + + Each file that can be built here now follows some + CONFIG_ option so that they are appropriately built + or not, as needed. And CONFIG_ defines were added + to various board config files to make sure that happens. + + The other board/freescale/*/Makefiles no longer need + to reach up and over into ../common to build their + individually needed files any more. + + Boards that are CDS specific were renamed with cds_ prefix. + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit a5af4b358a7caa9c0aa374d4d894bf762ec37669 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 22:00:27 2008 -0600 + + 85xx: Fix merge duplication + + ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5893b3d0a4084f87a06a5d3dc03db91206818941 +Author: James Yang <James.Yang@freescale.com> +Date: Tue Feb 12 16:35:07 2008 -0600 + + 85xx: Expand CCSR space with more DDR controller registers. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85 +Author: James Yang <James.Yang@freescale.com> +Date: Fri Feb 8 18:05:08 2008 -0600 + + 85xx: Speed up get_ddr_freq() and get_bus_freq() + + get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were + called. However, get_sys_info() recalculates extraneous information when + called each time. Have get_ddr_freq() and get_bus_freq() return memoized + values from global_data instead. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit e9ea679918fbc9a53fa2f2a904aac874ea736036 +Author: James Yang <James.Yang@freescale.com> +Date: Fri Feb 8 16:46:27 2008 -0600 + + 85xx: Show DDR memory data rate in addition to the memory clock frequency. + + Show the DDR memory data rate in addition to the memory clock + frequency. For DDR/DDR2 memories the memory data rate is 2x the + memory clock. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 591933ca6eabc440e6ed6967233aaf56fce464a3 +Author: James Yang <James.Yang@freescale.com> +Date: Fri Feb 8 16:44:53 2008 -0600 + + 85xx: get_tbclk() speed up and rounding fix + + Speed up get_tbclk() by referencing pre-computed bus clock + frequency value from global data instead of sys_info_t. Fix + rounding of result to nearest; previously it was rounding + upwards. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6 +Author: Andy Fleming <afleming@freescale.com> +Date: Wed Feb 6 01:19:40 2008 -0600 + + Update SVR numbers to expand support + + FSL has taken to using SVR[16:23] as an SOC sub-version field. This + is used to distinguish certain variants within an SOC family. To + account for this, we add the SVR_SOC_VER() macro, and update the SVR_* + constants to reflect the larger value. We also add SVR numbers for all + of the current variants. Finally, to make things neater, rather than + use an enormous switch statement to print out the CPU type, we create + and array of SVR/name pairs (using a macro), and print out the CPU name + that matches the SVR SOC version. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit b83eef440cf3cef816172ccbb5897ccd8e403cf3 +Author: Andy Fleming <afleming@freescale.com> +Date: Wed Feb 6 01:12:57 2008 -0600 + + Add the Freescale PCI device IDs + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Feb 14 11:04:23 2008 -0600 + + 85xx: Added support for multicore boot mechanism + + Added the cpu command that provides a generic mechanism to get status, + reset, and release secondary cores in multicore processors. + + Added support for using the ePAPR defined spin-table mechanism on 85xx. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Jan 17 16:48:33 2008 -0600 + + 85xx: Added support for multicore boot mechanism + + Added the cpu command that provides a generic mechanism to get status, + reset, and release secondary cores in multicore processors. + + Added support for using the ePAPR defined spin-table mechanism on 85xx. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f69766e4b5d47ecd3aa58677a8da875694f364f2 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 30 14:55:14 2008 -0600 + + 85xx: Add the concept of CFG_CCSRBAR_PHYS + + When we go to 36-bit physical addresses we need to keep the concept of + the physical CCSRBAR address seperate from the virtual one. + + For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 15:38:47 2008 +0100 + + Coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660 +Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> +Date: Wed Mar 26 13:02:13 2008 +0100 + + Add CFG_RTC_DS1337_NOOSC to turn off OSC output + + The default settings for RTC DS1337 keeps the OSC + output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to + turn it off. + + Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> + +commit 438a4c11260b4ea9805039b0b4f92f9df5306b02 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 11:48:46 2008 +0100 + + Cleanup coding style, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 218ca724c08ca8a649f0917cf201cf23d4b33f39 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 10:40:12 2008 +0100 + + README: update documentation (availability, links, etc.) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 +Author: Aras Vaichas <arasv@magtech.com.au> +Date: Tue Mar 25 12:09:07 2008 +1100 + + USB Storage, add meaningful return value + + This patch changes the "usb storage" command to return success if it + finds a USB storage device, otherwise it returns error. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 18e69a35efbb078403db0c0063986470dad7d082 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Fri Mar 14 23:20:18 2008 +0300 + + 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role + + Linux understands "host" (default), "peripheral" and "otg" (broken). + Though, U-Boot doesn't restrict dr_mode variable to these values (think + of renames in future). + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit c7604783b236e368f225efb7b3efb418fe20b404 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Fri Mar 14 23:20:30 2008 +0300 + + tsec: fix link detection for the RTL8211B PHY + + RTL8211B sets link state register after autonegotiation complete, + so with bootdelay=0 RTL8211B will report lack of the link. + + To fix this, we should wait for aneg to complete, even if the + link is currently down. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:09 2008 +0300 + + mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups + + device_type = "soc" is being deprecated, newer device trees will use + "fsl,soc" and/or "fsl,immr" for the soc nodes. + + This patch also adds clock-frequency property for soc nodes (the same + value as bus-frequency). + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07 +Author: Joe D'Abbraccio <ljd015@freescale.com> +Date: Mon Mar 24 13:00:59 2008 -0400 + + Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock + + With the original value of 1/2 clock cycle delay, the system ran relatively + stable except when we run benchmarks that are intensive users of memory. + When I run samba connected disk with a HDBENCH test, the system locks-up + or reboots sporadically. + + Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com> + +commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Mar 24 12:44:13 2008 -0500 + + mpc83xx: Set PCI I/O bus-address base to zero. + + The device trees for these boards describe PCI I/O as starting from + address zero from the device's perspective. + + Placing I/O elsewhere may cause problems with certain PCI boards, and may + cause problems with Linux. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:05 2008 +0300 + + mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK + + At least on the "33MHz Pilot" board crystal is actually 33.3MHz. + This patch fixes "system time drifting" problem. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 3a0cfdd576dc9b16d1468d37339182607c697fb7 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:02 2008 +0300 + + mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS + + This is needed to update /choosen/linux,stdout-path properly. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:47:00 2008 +0300 + + mpc83xx: MPC8360E-RDK: add dhcp command + + Plus modify environment to use it and remove bootfile env variable, + it is internal and CONFIG_BOOTFILE is used for these purposes. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:57 2008 +0300 + + mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc + + Current DDR setup easily causes memory corruption, this patch fixes it. + + Also fix TIMING_CFG0_MRS_CYC definition. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:53 2008 +0300 + + mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI + + This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen + controller and FHCI (QE USB). + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 7ad959490962e6842648d87d4bd795ea6cdcce67 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:51 2008 +0300 + + mpc83xx: MPC8360E-RDK: add support for NAND + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 9a3e832aeb491861d029991241572ebdf4b5b61b +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:46 2008 +0300 + + mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode + + This is needed for BCM PHYs to work on this board. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:34 2008 +0300 + + uec: add support for Broadcom BCM5481 Gigabit PHY + + This patch adds basic support for Broadcom BCM5481 PHY. + + RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is + Peter Barada <peterb@logicpd.com>. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 6a600c3a1876bc203445df4f0fd6b12648259666 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:28 2008 +0300 + + uec: add support for RGMII_RXID interface mode + + PHY drivers will use it to setup software delay between RXD and RXC + signals. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 20:46:24 2008 +0300 + + uec: add support for gbit mii status readings + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:47 2008 +0300 + + 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards + + This is primarily for the early console support. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:43 2008 +0300 + + 83xx: initialize serdes for MPC837XRDB boards + + On the MPC8377ERDB: 2 SATA and 2 PCI-E. + On the MPC8378ERDB: 2 PCI-E + On the MPC8379ERDB: 4 SATA + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 453316a2a19642d8afcbca7452e40a6b44a197b1 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:32 2008 +0300 + + 83xx: serdes setup routines + + This patch adds few routines to configure serdes on 837x targets. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit a796cdf9c377cb4e5d61d1079a296608f8fbd903 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:27 2008 +0300 + + 83xx: split COBJS onto separate lines + + ..plus get rid of some #ifdefs in the .c files. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Mar 24 17:40:23 2008 +0300 + + 83xx: nand support for MPC837XRDB boards + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 82e45a204190593e8613145a928f998fb8c909c4 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Tue Mar 18 21:44:41 2008 -0400 + + Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 0fa7a1b4719e325fce332689fb8754ec166191ff +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 20 13:15:39 2008 -0400 + + mpc8323erdb: remove RTC and add EEPROM + + There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 5bbeea86eb6afb872374cd23217cb3c1018443ed +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 20 13:15:34 2008 -0400 + + mpc8323erdb: Improve the system performance + + The following changes are based on kernel UCC ethernet performance: + + 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode + 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT + switch to enable this setting. + + The following changes are based on the App Note AN3369 and + verified to improve memory latency using LMbench: + + 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0 + 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting + previously. + 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on + Twr=15ns, and this was already the setting in DDR_MODE) + 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on + Trp=15ns) + 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on + Tras=40ns) + 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on + Trcd=15ns) + 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on + Trfc=75ns) + 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based + on Tfaw=50ns) + 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based + on CL=3 and WL=2). + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit fc549c871f43933396a5b3e21d897023d4b31b8d +Author: Michael Barkowski <michael.barkowski@freescale.com> +Date: Thu Mar 20 13:15:28 2008 -0400 + + mpc8323erdb: use readable DDR config macros + + Use available shift/mask macros to define DDR configuration. + + Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 89c7784ed90ba50301eec521144f95111e472906 +Author: Timur Tabi <timur@freescale.com> +Date: Fri Feb 8 13:15:55 2008 -0600 + + 83xx: Add Vitesse VSC7385 firmware uploading + + Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload + the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. + Cleaned up the board header files to make selecting the VSC7385 easier to + control. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc +Author: Timur Tabi <timur@freescale.com> +Date: Fri Feb 8 13:15:54 2008 -0600 + + NET: Add Vitesse VSC7385 firmware uploading + + The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX + and other boards. A small firwmare must be uploaded to its on-board memory + before it can be enabled. This patch adds the code which uploads firmware + (but not the firmware itself). + + Previously, this feature was provided by a U-Boot application that was + made available only on Freescale BSPs. The VSC7385 firmware must still + be obtained separately, but at least there is no longer a need for a separate + application. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Mar 26 00:52:10 2008 +0100 + + Coding Style cleanyp; update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 43ddd9c820fec44816188f53346b464e20b3142d +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Mar 22 14:23:49 2008 -0400 + + Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T + + These defines embedded the u-boot env variables and/or the bd_t structure + in the fdt blob. The conclusion of discussion on the u-boot email list + was that embedding these in the fdt blob is not useful: there are better + ways of passing the data (in fact, the fdt blob itself replaces the + bd_t struct). + + The only board that enables these is the stxxtc and they don't appear + to be used by linux. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + Acked-by: Kim Phillips <kim.phillips@freescale.com> + +commit 22ed2285743359fd1fe73e411dff914b2256e68f +Author: Stefan Roese <sr@denx.de> +Date: Mon Mar 17 10:49:25 2008 +0100 + + rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d +Author: Kyungmin Park <kmpark@infradead.org> +Date: Mon Mar 17 08:54:06 2008 +0900 + + Add Flex-OneNAND booting support + + Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array + using a NOR Flash interface. This on-chip integration enables system designers + to reduce external system logic and use high-density NAND Flash + in applications that would otherwise have to use more NOR components. + + Flex-OneNAND enables users to configure to partition it into SLC and MLC areas + in more flexible way. While MLC area of Flex-OneNAND can be used to store data + that require low reliability and high density, SLC area of Flex-OneNAND + to store data that need high reliability and high performance. Flex-OneNAND + can let users take advantage of storing these two different types of data + into one chip, which is making Flex-OneNAND more cost- and space-effective. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit c512389cc4a10253249271ff6c887c6dab1f0db2 +Author: André Schwarz <andre.schwarz@matrix-vision.de> +Date: Thu Mar 13 13:50:52 2008 +0100 + + MPC5200: support setup without FEC + + Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is + defined. Systems without FEC, i.e. no FEC node in DTB, should be possible. + + Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit aa3511e422946041ef626f80a05ae5e8bfc700e6 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:46 2008 -0600 + + FSL: Move board/mpc8266ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 7f1d846e5c5754449c286587d099d85246062772 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:47 2008 -0600 + + FSL: Move board/mpc7448hpc2 under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit b7e24d283e34727c2a6cdfdac2e09a426c579b73 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 18:05:45 2008 -0600 + + FSL: Move board/mpc8260ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Wed Mar 5 17:08:33 2008 +0900 + + net: Add support AX88796L ethernet device + + AX88796L is device of NE2000 compatible. + This patch support AX88796L ethernet device. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit e0a6140dd381e1eed1ada2291166ef2616d8822b +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 25 22:50:41 2008 +0100 + + ne2000 driver: change #ifdef to Makefile conditional compilation + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit e710185aae90c64d39c2d453e40e58ceefe4f250 +Author: goda.yusuke <goda.yusuke@renesas.com> +Date: Wed Mar 5 17:08:20 2008 +0900 + + net: Divided code of NE2000 ethernet driver + + There are more devices of the NE2000 base. + A present code is difficult for us to support more devices. + To support more NE2000 clone devices, separated the function. + + Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> + Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + +commit 395bce4f59a507a60a475f7ee46bed47de9482df +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Feb 24 23:58:13 2008 -0500 + + net/Blackfin: move on-chip MAC driver into drivers/net/ + + The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board + directory, but it is not board specific, so relocate it to the drivers dir + so that other Blackfin ports can utilize it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Feb 24 23:52:35 2008 -0500 + + smc91111: use SSYNC() rather than asm(ssync) for Blackfin + + Since the "ssync" instruction may have hardware anomalies associated with + it, have the smc91111 driver use the SSYNC macro rather than invoking it + directly. We workaround all the anomalies via this macro. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138 +Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> +Date: Sun Feb 17 22:57:47 2008 +0000 + + 8xx: Update OF support on 8xx + + This patch does some shifting around of OF support on 8xx. + + Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> + +commit 9c666a7db0b2285a270c68810889ce7d5dba304b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 15 15:16:18 2008 -0600 + + ppc: Allow boards to specify how much memory they can map + + For historical reasons we limited the stack to 256M because some boards + could only map that much via BATS. However newer boards are capable of + mapping more memory (for example 85xx is capble of doing up to 2G). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb +Author: Bryan O'Donoghue <bodonoghue@codehermit.ie> +Date: Fri Feb 15 01:05:58 2008 +0000 + + 8xx : Add OF support to Adder875 board port - resubmit + + Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> + +commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Feb 14 20:44:42 2008 -0600 + + Add setexpr command + + Add a simple expr style command that will set an env variable as the result + of the command. This allows us to do simple math in shell. The following + operations are supported: &, |, ^, +, -, *, /. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3f105faa64b9826e088711fdfcaa70cb1230397a +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 17:27:48 2008 -0600 + + FSL: Move board/mpc7448hpc2 under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 449c703374a8868453425e15da7e2f76221b72e4 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 17:21:43 2008 -0600 + + FSL: Move board/mpc8266ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 5863577989ad689427bb750107e9a75f1c1645d2 +Author: Jon Loeliger <jdl@freescale.com> +Date: Wed Mar 5 16:41:41 2008 -0600 + + FSL: Move board/mpc8260ads under board/freescale + + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit 8a773983957ee6c4aa344469b742f29c7d26afbd +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:08 2008 +0900 + + [MIPS] Move gth2_config from ARM section to MIPS + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Fix dcache_status() + + You can't judge UNCACHED by Config.K0 LSB. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Introduce _machine_restart + + Handles machine specific functions by using weak functions. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit decaba6f5cf386d569ac3997bebb871b966c6b18 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Cleanup CP0 Status initialization + + Add setup_c0_status from Linux. For the moment we disable interrupts, set + CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for + reset-time configuration and will work well across most processors. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] Initialize CP0 Cause before setting up CP0 Status register + + Without this change, we'll be suffering from deffered WATCH exception + once Status.EXL is cleared. Make sure Cause.WP is cleared. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 26138623230ca2bad3c78e05a65527ea70c8b688 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:07 2008 +0900 + + [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init() + + Move things to appropriate place. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Implement flush_cache() + + We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you + don't need to do Hit_Invalidate_I, but flush_cache() needs it since this + function is used not only in U-Boot specfic programs but also at loading + target binaries. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Fix I-/D-cache initialization loops + + Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I + again per a loop for I-cache initialization. But according to 'See MIPS + Run', we're encouraged to use three separate loops rather than combining + them *for both I- and D-cache*. This patch tries to fix this. + + In accordance with fixing above, mips_init_[id]cache are separated from + mips_cache_reset(), and rewrite cache loops are completely rewritten with + useful macros. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 1898840797c7f50799377bd5b285a8a93a82c419 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] Replace memory clearance code with f_fill64 + + This routine fills memory with zero by 64 bytes, and is 64-bit capable. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 2f5d414ccb4024dd0992ff6b22561732dbc73590 +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 21:30:06 2008 +0900 + + [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros + + This patch replaces the current function definitions with NESTED, LEAF + and END macro. They specify some more additional information about the + function; an alignment of symbol, type of symbol, stack frame usage, etc. + These information explicitly tells the assembler and the debugger about + the types of code we want to generate. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit 282223a607c611425fa33f5428f8eae6636972bb +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 11:43:17 2008 +0900 + + [MIPS] asm headers' updates + + Make some asm headers adjusted to the latest Linux kernel. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd +Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +Date: Tue Mar 25 11:39:29 2008 +0900 + + [MIPS] Request for the 'mips_cache_lock()' removal + + The initial intension of having mips_cache_lock() was to use the cache + as memory for temporary stack use so that a C environment can be set up + as early as possible. + + But now mips_cache_lock() follow lowlevel_init(). We've already have the + real memory initilaized at this point, therefore we could/should use it. + No reason to lock at all. + + Other problems: + + Cache locking is not consistent across MIPS implementaions. Some imple- + mentations don't support locking at all. The style of locking varies - + some support per line locking, others per way, etc. Some parts use bits + in status registers instead of cache ops. Current mips_cache_lock() is + not necessarily general-purpose. + + And this is worthy of special mention; once U-Boot/MIPS locks the lines, + they are never get unlocked, so the code relies on whatever gets loaded + after U-Boot to re-initialize the cache and clear the locks. We're sup- + posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented, + but leave the situation as it is for a long time. + + For these reasons, I proposed the removal of mips_cache_lock() from the + global start-up code. + + This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that + *things have changed*. If he wants the same behavior as before, he needs + to have CFG_INIT_RAM_LOCK_MIPS in his config file. + + If we don't have any regression report through several releases, then + we'll remove codes entirely. + + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + Acked-by: Andrew Dyer <amdyer@gmail.com> + +commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Mon Mar 24 11:30:54 2008 +0100 + + lwmon5 SYSMON POST: fix backlight control + + If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be + run on the board, then the SYSMON POST controls the display backlight + (doesn't switch backlight ON if POST FAILED, and does switch the + backlight ON if PASSED). + + If not, then the video driver controls the display backlight (just + switch ON the backlight upon initialization). + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Mon Mar 24 11:29:14 2008 +0100 + + lwmon5 SYSMON POST: fix handling of negative temperatures + + Fix errors in the LWMON5 Sysmon POST for negative temperatures. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 +Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +Date: Fri Mar 7 16:04:25 2008 +0900 + + pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option + + In current source code, when the device number of PCI is 0, process PCI + bridge without fail. However, when the device number is 0, it is not PCI + always bridge. There are times when device of PCI allocates. + + When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when + use this patch. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Fri Mar 21 09:18:40 2008 +0100 + + LWMON5: fix dsPIC POST + + Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> --- + +commit 388b82fddc7c05596f3f615f190da0448227dc82 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:23:13 2008 +0100 + + [new uImage] Enable new uImage support for the pcs440ep board. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 95f4ec2b9c910c7261e6f060ea530d58b039692d +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:23:13 2008 +0100 + + [new uImage] Do not compile new uImage format support by default + + Disable default building of new uImage format support in preparation + for merge with the master. Support for new format can be enabled on + a per-board basis, by defining the following in the board's config file: + + #define CONFIG_FIT 1 + #define CONFIG_OF_LIBFDT 1 + + This can be optionally defined to give more verbose output: + + #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit dafaede8a46c7159310239e036c93e31c6374487 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:20:31 2008 +0100 + + [new uImage] Disable debuging output in preparation for merge with master + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit fbe7a155027beacebaee9b32e1ada781fe924bca +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 19:38:45 2008 +0100 + + [new uImage] Compilation and new uImage handling fixes for imxtract + + Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in + include/config_cmd_default.h. Fix few warnings and handling of new format + images. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 36cc8cbb3379d5166f882641123521735c469f92 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:10:19 2008 +0100 + + [new uImage] Fix autoscr command used with new uImage format + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 43142e817f0597be412e7cbe19413f5532eafa5d +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Mar 20 23:10:19 2008 +0100 + + [new uImage] Fix *.its files location in documentation + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Mar 20 22:01:38 2008 +0100 + + lwmon5 POST: remove unreachable code + + plus some coding style cleanup + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit b73a19e1609d0f705cbab8014ca17aefe89e4c76 +Author: Yuri Tikhonov <yur@emcraft.com> +Date: Thu Mar 20 17:56:04 2008 +0300 + + LWMON5: POST RTC fix + + Modify the RTC API to provide one a status for the time reported by + the rtc_get() function: + 0 - a reliable time is guaranteed, + < 0 - a reliable time isn't guaranteed (power fault, clock issues, + and so on). + + The RTC chip drivers are responsible for providing this info if the + corresponding chip supports such functionality. If not - always + report that the time is reliable. + + The POST RTC test was modified to detect the RTC faults utilizing + this new rtc_get() feature. + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5 +Author: Martin Krause <martin.krause@tqs.de> +Date: Wed Mar 19 14:25:14 2008 +0100 + + TQM5200B: update MTD partition layout + + - insert partition for dtb blob to TQM5200B MTD layout + - set env variables dependent on the configured board + (TQM5200 or TQM5200B) + + Signed-off-by: Martin Krause <martin.krause@tqs.de> + +commit f0105727d132f56a21fa3ed8b162309cca6cac44 +Author: Stefan Roese <sr@denx.de> +Date: Wed Mar 19 07:09:26 2008 +0100 + + CFI: Small cleanup for FLASH_SHOW_PROGRESS + + With this patch we don't need that many #ifdef's in the code. It moves + the subtraction into the macro and defines a NOP-macro when + CONFIG_FLASH_SHOW_PROGRESS is not defined. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 9a042e9ca512beaaa2cb450274313fc477141241 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Sat Mar 8 13:48:01 2008 -0500 + + Flash programming progress countdown. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Wed Mar 19 10:00:06 2008 +0100 + + [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org> + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Mon Feb 18 18:09:04 2008 +1100 + + libfdt: Remove no longer used code from fdt_node_offset_by_compatible() + + Since fdt_node_offset_by_compatible() was converted to the new + fdt_next_node() iterator, a chunk of initialization code became + redundant, but was not removed by oversight. This patch cleans it up. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit d0ccb9b140b472039732de102fc14597eedb14df +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Mon Feb 18 18:06:31 2008 +1100 + + libfdt: Trivial cleanup for CHECK_HEADER) + + Currently the CHECK_HEADER() macro is defined local to fdt_ro.c. + However, there are a handful of functions (fdt_move, rw_check_header, + fdt_open_into) from other files which could also use it (currently + they open-code something more-or-less identical). Therefore, this + patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those + places. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit fe30a354cdbb808b5f15366a935b151a4ccee74f +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 20 14:32:36 2008 -0600 + + Fix fdt boardsetup command parsing + + The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 804887e6001e2f00bea11431bf34d6d472512cda +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 15 03:34:36 2008 -0600 + + Add sub-commands to fdt + + fdt header - Display header info + fdt bootcpu <id> - Set boot cpuid + fdt memory <addr> <size> - Add/Update memory node + fdt rsvmem print - Show current mem reserves + fdt rsvmem add <addr> <size> - Add a mem reserve + fdt rsvmem delete <index> - Delete a mem reserves + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Thu Feb 14 16:50:34 2008 +1100 + + libfdt: Fix NOP handling bug in fdt_add_subnode_namelen() + + fdt_add_subnode_namelen() has a bug if asked to add a subnode to a + node which has NOP tags interspersed with its properties. In this + case fdt_add_subnode_namelen() will put the new subnode before the + first NOP tag, even if there are properties after it, which will + result in an invalid blob. + + This patch fixes the bug, and adds a testcase for it. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9 +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Tue Feb 12 11:58:31 2008 +1100 + + libfdt: Add and use a node iteration helper function. + + This patch adds an fdt_next_node() function which can be used to + iterate through nodes of the tree while keeping track of depth. This + function is used to simplify the iteration code in a lot of other + functions, and is also exported for use by library users. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Fri Jan 11 14:55:05 2008 +1100 + + libfdt: Add fdt_set_name() function + + This patch adds an fdt_set_name() function to libfdt, mirroring + fdt_get_name(). This is a r/w function which alters the name of a + given device tree node. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 23e20aa6488e6c0622496549861bfdc74108debe +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Tue Mar 18 13:33:30 2008 +0100 + + lwmon5: Fix register test logic to match the specific GDC h/w. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 46bc0a938779aa1d664b847d36b08aa00f22e539 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Tue Mar 18 13:27:57 2008 +0100 + + Fix backlight in the lwmon5 POST. + + Backlight was switched on even when temperature was too low. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Wed Feb 6 18:48:36 2008 +0100 + + The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5). + + To enable this, alternative, configuration the U-Boot board configuration + file for lwmon5 includes the definitions of alternative addresses for header + (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). + + The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, + and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the + lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). + + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 0f009f781b5b88f25769e154ea4d42db13baf0c6 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 17:11:53 2008 +0100 + + Add support for the lwmon5 board reset via GPIO58. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit f694e32f93565ec1fa8d0226c584d6b89e931ed9 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 17:09:55 2008 +0100 + + Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:11:03 2008 +0100 + + The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184 +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:10:42 2008 +0100 + + The patch adds new POST tests for the Lwmon5 board. These are: + + * External Watchdog test; + * dsPIC tests; + * FPGA test; + * GDC test; + * Sysmon tests. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + Signed-off-by: Yuri Tikhonov <yur@emcraft.com> + +commit c2ed33efbfff5767bca236828e021c55fd547b6c +Author: Yuri Tikhonov <yur@pollux.denx.de> +Date: Mon Feb 4 14:10:01 2008 +0100 + + Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. + + Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> + +commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Mar 18 17:35:51 2008 +0100 + + HMI1001: fix compile problem. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 1f2a9970109cebf7446e0503b10b71f8673045ee +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:32:30 2008 -0500 + + Blackfin: BF537-stamp: drop board-specific flash driver for CFI + + The parallel flash on the BF537-STAMP is CFI compliant, so there is no need + for the board specific driver at all. Just use the common CFI driver. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:36:14 2008 -0500 + + Blackfin: add proper ELF markings to some assembly functions + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Feb 19 00:35:17 2008 -0500 + + Blackfin: new cplbinfo command for viewing cplb tables + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit aadb72503cd1602349a5fe53356d5f55ecc1b900 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:37:51 2008 -0500 + + Blackfin: update MAINTAINERS list + + Add maintainer information for the Blackfin boards. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Feb 18 05:26:48 2008 -0500 + + Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU + + Stop tying things to the processor that should be tied to other defines and + change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build + system to select the -mcpu option. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 86a20fb920bd198105acf7b1191117f566d637ed +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Feb 16 07:40:36 2008 -0500 + + Blackfin: move bootldr command to common code + + This moves the Blackfin-common bootldr command out of the BF537-STAMP + specific board directory and into the common directory so that all Blackfin + boards may utilize it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit decbe029b2a9d3333d02c433389b1c821eea96d7 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Mar 14 11:05:20 2008 +0100 + + mgcoge: update configuration + + Fix configuration for mgcoge board + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit c136724cda0219c49f1d4b346f00da29b14fdf14 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Mar 16 01:22:59 2008 +0100 + + drivers/rtc/Makefile: keep list sorted + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f +Author: Tor Krill <tor@excito.com> +Date: Sat Mar 15 15:40:26 2008 +0100 + + Add support for Intersil isl1208 RTC + + Signed-off-by: Tor Krill <tor@excito.com> + +commit 0210cff3d079d97b2156b13685ee8de368e68a1a +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Mar 15 17:36:41 2008 +0100 + + cramfs: Fix ifdef + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4 +Author: Wolfgang Denk <wd@denx.de> +Date: Sun Mar 16 01:12:58 2008 +0100 + + Conding style cleanup + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 41712b4e8c95dff23354bcd620e1f9477160c190 Author: Stefan Roese <sr@denx.de> Date: Wed Mar 5 12:31:53 2008 +0100 @@ -226,6 +4169,25 @@ Date: Tue Mar 11 13:52:25 2008 +0100 Signed-off-by: Stefan Roese <sr@denx.de> +commit 766529fccc860ecb9e955b4239dff69cd9e4ea09 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Mar 14 16:22:34 2008 +0100 + + Add MD5 support to the new uImage format + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 0ede0c383530a418cf98be9122371a86573cd0db +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Mar 14 16:22:34 2008 +0100 + + Add the MD5 algorithm + + MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then + calculated using the md5() function -- see include/md5.h for details. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0 Author: Wolfgang Denk <wd@denx.de> Date: Fri Mar 14 16:04:54 2008 +0100 @@ -259,6 +4221,276 @@ Date: Thu Mar 13 14:29:49 2008 +0100 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 12:14:15 2008 +0100 + + [new uImage] Fix build issue on ARM + + ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3310c549a73a949430bfda90876df7552a1dab0c +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 12:13:13 2008 +0100 + + [new uImage] Add new uImage format documentation and examples + + Create doc/uImage.FIT documentation directory with the following files: + - command_syntax_extensions.txt : extended command syntax description + - howto.txt : short usage howto + - source_file_format.txt : internal new uImage format description + + Add example image source files: + - kernel.its + - kernel_fdt.its + - multi.its + + Update README appropriately. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 1ec73761d2e247078f4520a265d463e8b73391a2 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:35:52 2008 +0100 + + [new uImage] Fix definition of common bootm_headers_t fields + + verify, autostart and lmb fields are used regardless of CONFIG_FIT + setting, move their definitions to common section. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1d1cb4270edc6a99276834064069717f9782c491 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:35:51 2008 +0100 + + [new uImage] Fix build problems on trab board + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit f773bea8e11f4a11c388dcee956b2444203e6b65 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:35:46 2008 +0100 + + [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used + + Save FIT configuration provied in the first bootm argument and use it + when to get ramdisk/FDT subimages when second and third (ramdisk/FDT) + arguments are not specified. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] More verbose kernel image uncompress error message + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] Use show_boot_progress() for new uImage format + + This patch allocates a set of show_boot_progress() IDs for new uImage format + and adds show_boot_progress() calls in new uImage format handling code. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] Add new uImage fromat support to fpga command + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 09475f7527460e426c0e0628fc5b8f3754fbaa23 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:01 2008 +0100 + + [new uImage] Add new uImage format handling to other bootm related commands + + Updated commands: + + docboot - cmd_doc.c + fdcboot - cmd_fdc.c + diskboot - cmd_ide.c + nboot - cmd_nand.c + scsiboot - cmd_scsi.c + usbboot - cmd_usb.c + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:00 2008 +0100 + + [new uImage] Add new uImage format support to imgextract command + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 424c4abdd175d2c470510df8ce0e32d3f463ec16 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:00 2008 +0100 + + [new uImage] Add new uImage format support to autoscript routine + + autoscript() routine is updated to accept second argument, which + is only used for FIT images and provides a FIT subimage unit name. + + autoscript() routine callers must now pass two arguments. For + non-interactive use (like in cmd_load.c, cmd_net.c), new environment + variable 'autoscript_uname' is introduced and used as a FIT + subimage unit name source. + + autoscript command accepts extended syntax of the addr argument: + addr:<subimg_uname> + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit cd7c596e9f561dbbc17b717277438aee78cde14f +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:33:00 2008 +0100 + + [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines + + This patch updates architecture specific implementations of + do_bootm_linux() adding new uImage format handling for + operations like get kernel entry point address, get kernel + image data start address. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 3dfe110149311425919e6d6a14b561b4207498f1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:32:59 2008 +0100 + + [new uImage] Add node offsets for FIT images listed in struct bootm_headers + + This patch adds new node offset fields to struct bootm_headers + and updates bootm_headers processing code to make use of them. + Saved node offsets allow to avoid repeating fit_image_get_node() calls. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit bc8ed486b125452ba3bd8344f052f437329150c5 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:32:53 2008 +0100 + + [new uImage] ppc: Add new uImage format support to FDT handling routines + + Support for new (FIT) format uImages is added to powerpc specific + boot_get_fdt() routine which now recognizes, sanity checks FIT image + and is able to access data sections of the requested component image. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit a44a269a905f924b420020506a4d7d7eedcc0eaf +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:14:57 2008 +0100 + + [new uImage] Re-enable interrupts for non automatic booting + + Re-enable interrupts if we return from do_bootm_<os> and 'autostart' + environment variable is not set to 'yes'. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d985c8498c4e47095820da97aa722381d39172c5 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:14:38 2008 +0100 + + [new uImage] Remove unnecessary arguments passed to ramdisk routines + + boot_get_ramdisk() and image_get_ramdisk() do not need all + cmdtp, flag, argc and argv arguments. Simplify routines definition. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit c87796483bc7c2900470dc747c367f602577608d +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:12:37 2008 +0100 + + [new uImage] Add new uImage format support for ramdisk handling + + This patch updates boot_get_ramdisk() routine adding format + verification and handling for new (FIT) uImages. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Mar 12 10:01:05 2008 +0100 + + [new uImage] Add new uImage format support for kernel booting + + New format uImages are recognized by the bootm command, + validity of specified kernel component image is checked and + its data section located and used for further processing + (uncompress, load, etc.) + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Mar 11 12:35:20 2008 +0100 + + [new uImage] Add new uImage format support for imls and iminfo commands + + imls and iminfo can now recognize nad print out contents of the new (FIT) + format uImages. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 9d25438fe7d70cf35a8a293ea5e392fefc672613 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue Mar 11 12:34:47 2008 +0100 + + [new uImage] Add support for new uImage format to mkimage tool + + Support for the new uImage format (FIT) is added to mkimage tool. + Commandline syntax is appropriately extended: + + mkimage [-D dtc_options] -f fit-image.its fit-image + + mkimage (together with dtc) takes fit-image.its and referenced therein + binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the + final image that can be transferred to the target (e.g., via tftp) and then + booted using the bootm command in U-Boot. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit eb6175edd6c120d8b89678243e5a2be362ee8e40 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Mon Mar 10 17:53:49 2008 +0100 + + [new uImage] Make node unit names const in struct bootm_headers + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 21:24:06 2008 +0100 + + [new uImage] New uImage low-level API + + Add FDT-based functions for handling new format component images, + configurations, node operations, property get/set, etc. + + fit_ - routines handling global new format uImage operations + like get/set top level property, process all nodes, etc. + fit_image_ - routines handling component images subnodes + fit_conf_ - routines handling configurations node + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit 30f1806f60978d707b0cff2d7bf89d141fc24290 Author: Wolfgang Denk <wd@denx.de> Date: Sun Mar 9 16:20:02 2008 +0100 @@ -857,6 +5089,238 @@ Date: Sun Feb 24 11:44:29 2008 +0900 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 22:22:46 2008 +0100 + + [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt() + + Do not use global fdt blob pointer, calculate blob size from routine + argument blob pointer. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d1cc52879c8966507dad9fb575481e6d3985e64e +Author: David Gibson <david@gibson.dropbear.id.au> +Date: Tue Feb 12 00:58:31 2008 +1100 + + libfdt: Add and use a node iteration helper function. + + This patch adds an fdt_next_node() function which can be used to + iterate through nodes of the tree while keeping track of depth. This + function is used to simplify the iteration code in a lot of other + functions, and is also exported for use by library users. + + Signed-off-by: David Gibson <david@gibson.dropbear.id.au> + +commit 8cf30809a82902a471866d2f07725ce3b8a22291 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Feb 29 16:00:24 2008 +0100 + + [new uImage] Add libfdt support to mkimage + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Fri Feb 29 16:00:23 2008 +0100 + + [new uImage] Add sha1.o object to mkimage binary build + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit df6f1b895c997978f03afe04502ee76b7ba34ab9 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 16:00:06 2008 +0100 + + [new uImage] Fix component handling for legacy multi component images + + Use uint32_t when accessing size table in image_multi_count() and + image_multi_getimg() for multi component images. + + Add missing uimage_to_cpu() endianness conversion. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 15:59:59 2008 +0100 + + [new uImage] Share common uImage code between mkimage and U-boot + + This patch adds the following common routines: + + 1) Dedicated mkimage print_header() is replaced with common + image_print_contents() + image_print_contents_noindent() + + 2) Common os/arch/type/comp fields name <--> id translation routines + genimg_get_os_name() + genimg_get_arch_name() + genimg_get_type_name() + genimg_get_comp_name() + genimg_get_os_id() + genimg_get_arch_id() + genimg_get_type_id() + genimg_get_comp_id() + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Fri Feb 29 14:58:34 2008 +0100 + + [new uImage] Update naming convention for bootm/uImage related code + + This patch introduces the following prefix convention for the + image format handling and bootm related code: + + genimg_ - dual format shared code + image_ - legacy uImage format specific code + fit_ - new uImage format specific code + boot_ - booting process related code + + Related routines are renamed and a few pieces of code are moved around and + re-grouped. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:51 2008 -0600 + + [new uImage] Respect autostart setting in linux bootm + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:50 2008 -0600 + + [new uImage] Provide ability to restrict region used for boot images + + Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way + to restrict what memory range is used for bootm. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:49 2008 -0600 + + [new uImage] Use lmb for bootm allocations + + Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd() + functions over to using lmb for allocation of the ramdisk, command line + and kernel bd info. + + Convert PPC specific fdt_relocate() to use lmb for allocation of the device + tree. + + Provided a weak function that board code can call to do additional + lmb reserves if needed. + + Also introduce the concept of bootmap_base to specify the offset in + physical memory that the bootmap is located at. This is used for + allocations of the cmdline, kernel bd, and device tree as they should + be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit f5614e7926863bf0225ec860d9b319741a9c4004 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:48 2008 -0600 + + [new uImage] Add autostart flag to bootm_headers structure + + The autostart env variable was dropped as part of the initial new uImage + cleanup. Add it back here so the arch specific code can decide if it + wants to really boot or not. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit 4ed6552f715983bfc7d212c1199a1f796f1144ad +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:47 2008 -0600 + + [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images + + Introduce the LMB lib used on PPC in the kernel as a clean way to manage + the memory spaces used by various boot images and structures. This code + will allow us to simplify the code in bootm and its support functions. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Feb 19 22:03:47 2008 -0600 + + [new uImage] ppc: Allow boards to specify effective amount of memory + + For historical reasons we limited the stack to 256M because some boards + could only map that much via BATS. However newer boards are capable of + mapping more memory (for example 85xx is capable of doing up to 2G). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit 274cea2bddbca10cdad7daa518951b75c44ef6bc +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:46 2008 -0600 + + [new uImage] rework error handling so common functions don't reset + + Changed image_get_ramdisk() to just return NULL on error and have + get_ramdisk() propogate that error to the caller. It's left to the + caller to call do_reset() if it wants to. + + Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc + to a common location. In the future we will change get_fdt() and + fdt_relocate() to return success/failure and not call do_reset() at all. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit d2bc095a639672def11d5d043b5688d0dbd692ec +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:45 2008 -0600 + + [new uImage] ppc: Re-order ramdisk/fdt handling sequence + + Doing the fdt before the ramdisk allows us to grow the fdt w/o concern + however it does mean we have to go in and fixup the initrd info since + we don't know where it will be. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 27953493ef025fb698d68c5dee39b36f01f4d530 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:44 2008 -0600 + + [new uImage] ppc: Determine if we are booting an OF style + + If we are bootin OF style than we can skip setting up some things + that are used for the old boot method. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + +commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Feb 27 21:51:43 2008 -0600 + + [new uImage] Don't pass kdb to ramdisk_high since we may not have one + + We don't actually need the kdb param as we are just using it to get + bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we + boot via OF we might not actually fill out a kdb. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Marian Balakowicz <m8@semihalf.com> + commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775 Author: Kumar Gala <galak@kernel.crashing.org> Date: Wed Feb 27 16:30:47 2008 -0600 @@ -917,6 +5381,98 @@ Date: Sun Feb 17 22:56:16 2008 +0100 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +commit 4efbe9dbb129f857f27856936112c8c02f016be6 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:02:26 2008 +0100 + + [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled + + Dual format image code must properly handle all three FDT passing methods: + - raw FDT blob passed + - FDT blob embedded in the legacy uImage + - FDT blob embedded in the new uImage + + This patch enables proper raw FDT handling when no FIT imaeg support + is compiled in. This is a bit tricky as we must dected FIT format even + when FIT uImage handling is not enabled as both FIT uImages and raw FDT + blobs use tha same low level format (libfdt). + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:02:26 2008 +0100 + + [new uImage] POWERPC: Add image_get_fdt() routine + + FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage + (3) or embedded in the new uImage. For the (2) case embedding image must be + verified before we get FDT from it. This patch factors out legacy image + specific verification routine to the separate helper routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 1efd43601f90de21ec6c0ebb9880823e822927b1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:02:07 2008 +0100 + + [new uImage] Add image_get_kernel() routine + + Legacy image specific verification is factored out to a separate helper + routine to keep get_kernel() generic and simple. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:01:04 2008 +0100 + + [new uImage] Move image verify flag to bootm_headers structure + + Do not pass image verification flag directly to related routines. + Simplify argument passing and move it to the bootm_header structure which + contains curently processed image specific data and is already being passed + on the argument list. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit 823afe7cefe00dafefc6696c1cc7aa828c394234 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:00:47 2008 +0100 + + [Makefile] Sort COBJS in lib_<arch> Makefiles + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Feb 27 11:00:47 2008 +0100 + + [new uImage] Optimize gen_get_image() flow control + + When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing + to do, update its control flow to better reflect that simple case. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + +commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca +Author: Marian Balakowicz <m8@semihalf.com> +Date: Mon Feb 4 08:28:17 2008 +0100 + + [new uImage] POWERPC: Split get_fdt() into get and relocate routines + + PPC specific FDT blob handling code is divided into two separate routines: + + get_fdt() - find and verify a FDT blob (either raw or image embedded) + fdt_relocate() - move FDT blob to within BOOTMAP if needed + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Kumar Gala <galak@kernel.crashing.org> + commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817 Author: Jon Loeliger <jdl@freescale.com> Date: Mon Feb 25 13:13:37 2008 -0600 @@ -982,6 +5538,24 @@ Date: Sun Feb 24 23:03:10 2008 +0000 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +commit d5934ad7756f038a393a9cfab76a4fe306d9d930 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Mon Feb 4 08:28:09 2008 +0100 + + [new uImage] Add dual format uImage support framework + + This patch adds framework for dual format images. Format detection is added + and the bootm controll flow is updated to include cases for new FIT format + uImages. + + When the legacy (image_header based) format is detected appropriate + legacy specific handling is invoked. For the new (FIT based) format uImages + dual boot framework has a minial support, that will only print out a + corresponding debug messages. Implementation of the FIT specific handling will + be added in following patches. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit b29661fc1151077776454288051bc9a488351ce8 Author: Wolfgang Denk <wd@denx.de> Date: Sun Feb 24 15:21:36 2008 +0100 @@ -1272,6 +5846,73 @@ Date: Sat Feb 16 02:12:37 2008 -0500 Signed-off-by: Mike Frysinger <vapier@gentoo.org> +commit 5583cbf736474ef754e128a54fb78632f57b48fd +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:27:49 2008 +0100 + + [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 2242f5369822bc7780db95c47985bb408ea9157b +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:27:41 2008 +0100 + + [new uImage] Rename and move print_image_hdr() routine + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit f50433d670ec2ee9e96abac67cdc6e5e061a810d +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:20:20 2008 +0100 + + [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines + + Introducing routines for parsing new uImage format bootm arguments: + [<addr>]#<conf> - configuration specification + [<addr>]:<subimg> - subimage specification + + New format images can contain multiple subimages of the same type. For example + a single new format image file can contain three kernels, two ramdisks and a + couple of FDT blobs. Subimage and configuration specifications are extensions + to bootm (and other image-related commands) arguments' syntax that allow to + specify which particular subimage should be operated on. + + Subimage specification is used to denote a particular subimage. Configurations + are a bit more complex -- they are used to define a particualr booting setup, + for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple, + etc. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit fff888a1997ff7de9b29e24050fc4a0fd403ba16 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:20:19 2008 +0100 + + [new uImage] Add gen_get_image() routine + + This routine assures that image (whether legacy or FIT) is not + in a special dataflash storage. + + If image address is a dataflash address image is moved to system RAM. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 75d3e8fbd93c14d9929d024c75af2d742c76db70 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Feb 21 17:20:18 2008 +0100 + + [new uImage] Pull in libfdt if CONFIG_FIT is enabled + + New uImage format (Flattened Image Tree) requires libfdt + functionality, print out error message if CONFIG_OF_LIBFDT + is not defined. + + New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT). + This commit turns it on by default. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728 Author: Michael Schwingen <michael@schwingen.org> Date: Mon Feb 18 23:16:35 2008 +0100 @@ -2050,6 +6691,312 @@ Date: Thu Jan 17 08:25:45 2008 -0600 Signed-off-by: Kumar Gala <galak@kernel.crashing.org> +commit 5cf746c303710329f8040d9c62ee354313e3e91f +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:59:09 2008 +0100 + + [new uImage] Move kernel data find code to get_kernel() routine + + Verification of the kernel image (in old format) and finding kernel + data is moved to a dedicated routine. The routine will also hold + support for, to be added, new image format. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 7b325454fd231d4273de3fe373850f777fb086bf +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:58:20 2008 +0100 + + [new uImage] Cleanup FDT handling in PPC do_boot_linux() + + Move FDT blob finding and relocation to a dedicated + get_fdt() routine. It increases code readability and + will make adding support for new uImage format easier. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit b6b0fe6460b7063ac60b9a3531ef210aedb31451 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:58:13 2008 +0100 + + [new uImage] Cleanup do_botm_linux() boot allocations + + This patch moves common pre-boot allocation steps shared between PPC + and M68K to a helper routines: + + common: + - get_boot_sp_limit() + - get_boot_cmline() + - get_boot_kbd() + + platform: + - set_clocks_in_mhz() + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:57:17 2008 +0100 + + [new uImage] Move ramdisk loading to a common routine + + Ramdisk loading code, including initrd_high variable handling, + was duplicated for PPC and M68K platforms. This patch creates + common helper routine that is being called from both platform + do_bootm_linux() routines. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:55:53 2008 +0100 + + [new uImage] Removed dead ramdisk code on microblaze architectures + + Microblaze do_bootm_linux() includes ramdisk processing code but + the ramdisk does not get used anywhere later on. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 5ad03eb3854c162684222a718b44c0716ea0db03 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:55:39 2008 +0100 + + [new uImage] Factor out common image_get_ramdisk() routine + + Architecture specific do_bootm_linux() routines share common + ramdisk image processing code. Move this code to a common + helper routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:08 2008 +0100 + + [new uImage] Move FDT error printing to common fdt_error() routine + + FDT error handling in PPC do_bootm_linux() shares the same message format. + This patch moves error message printing to a helper fdt_error() routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 42b73e8ee00d48004791dea64b8093fb974c57e1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:07 2008 +0100 + + [new uImage] Factor out common routines for getting os/arch/type/comp names + + Move numeric-id to name translation for image os/arch/type/comp header + fields to a helper routines: image_get_os_name(), image_get_arch_name(), + image_get_type_name(), image_get_comp_name(). + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit e99c26694a384221d336f6448c06a57479c0baa4 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:07 2008 +0100 + + [new uImage] Remove standalone applications handling from boootm + + Standalone applications are supposed to be run using the "go" command. + This patch removes standalone images handling from the do_bootm(). + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:07 2008 +0100 + + [new uImage] Remove OF_FLAT_TREE support from PPC bootm code + + Support for OF_FLAT_TREE is to be obsoleted in the near future, + remove related code from the bootm routines. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 82850f3d32a2661868ec6876bed7a22c55cef718 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:06 2008 +0100 + + [new uImage] Use image API in SH do_bootm_linux() routine + + Introduce image handling API for lately added Hitachi SH architecture. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 4a995edec1ac163d9326d143ffe2b47e7543407f +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:06 2008 +0100 + + [new uImage] Rename architecture specific bootm code files + + Implementation of the do_bootm_linux() and other bootm helper routines is + architecture specific code. As such it resides in lib_<arch> directories + in files named <arch>_linux.c + + This patch renames those files to a more clear and accurate + lib_<arch>/bootm.c form. + + List of the renamed files: + lib_arm/armlinux.c -> lib_arm/bootm.c + lib_avr32/avr32_linux.c -> lib_avr32/bootm.c + lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c + lib_i386/i386_linux.c -> lib_i386/bootm.c + lib_m68k/m68k_linux.c -> lib_m68k/bootm.c + lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c + lib_mips/mips_linux.c -> lib_mips/bootm.c + lib_nios/nios_linux.c -> lib_nios/bootm.c + lib_nios2/nios_linux.c -> lib_nios2/bootm.c + lib_ppc/ppc_linux.c -> lib_ppc/bootm.c + lib_sh/sh_linux.c -> lib_sh/bootm.c + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 7582438c285bf0cef82909d0f232de64ec567a8a +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:20:06 2008 +0100 + + [new uImage] Return error on image move/uncompress overwrites + + Check for overwrites during image move/uncompress, return with error + when the original image gets corrupted. Report clear message to the user + and prevent further troubles when pointer to the corrupted images is passed + to do_bootm_linux routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit f13e7b2e993c61fed1f607962501e051940d6e80 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:12:17 2008 +0100 + + [new uImage] Cleanup image header pointer use in bootm code + + - use single image header pointer instead of a set of auxilliary variables. + - add multi component image helper routines: get component size/data address + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:17:10 2008 +0100 + + [new uImage] Cleanup cmd_bootm.c + + - sort and cleanup headers, declarations, etc. + - group related routines + - cleanup indentation, white spaces + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit af13cdbc01eaf88880978bfb4f603e012818ba24 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:45 2008 +0100 + + [new uImage] Add memmove_wd() common routine + + Move common, watchdog sensible memmove code to a helper memmmove_wd() routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Fix FDT header verification in PPC do_boot_linux() routine + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 15158971f49255ccef54f0979a942cfd3de2ae52 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Fix uImage header pointer use in i386 do_bootm_linux() + + Use image header copy instead of a (possibly corrupted) pointer to + a initial image location. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 261dcf4624b25f3c551efcf8634e9194fabba9c3 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Remove I386 uImage fake_header() routine + + I386 targets are not using a uImage format, instead fake header + is added to ram image before it is further processed by bootm. + + Remove this fixup and force proper uImage use for I386. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 559316faf7eae0614c91d77f509b57d6c4c091ba +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:44 2008 +0100 + + [new uImage] Move CHUNKSZ definition to image.h + + CHUNKSZ defined for PPC and M68K is set to the same value of 64K, + move this definition to a common header. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 321359f20823e0b8c5ad38b64d007a6c48cda16e +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:43 2008 +0100 + + [new uImage] Move gunzip() common code to common/gunzip.c + + Move gunzip(), zalloc() and zfree() to a separate file. + Share zalloc() and zfree() with cramfs uncompress routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit d45d5a18b6b36688f2365623f9d550566c664b5b +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:43 2008 +0100 + + [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux() + + Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more + readable in PPC variant of do_bootm_linux() routine. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:11:43 2008 +0100 + + [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c + + PPC implementation of do_bootm_linux() routine is moved to + a dedicated file lib_ppc/ppc_linux.c + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c +Author: Marian Balakowicz <m8@semihalf.com> +Date: Tue Jan 8 18:14:09 2008 +0100 + + [new uImage] Define a API for image handling operations + + - Add inline helper macros for basic header processing + - Move common non inline code common/image.c + - Replace direct header access with the API routines + - Rename IH_CPU_* to IH_ARCH_* + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + +commit ed29bc4e8142b46b626f67524207b36e43d9aad6 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Thu Jan 31 13:19:58 2008 +0100 + + Add missing cmd_ximg.o to common/Makefile + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3 Author: Grzegorz Bernacki <gjb@semihalf.com> Date: Mon Jan 28 10:15:02 2008 +0100 |