diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 24 |
1 files changed, 24 insertions, 0 deletions
@@ -3026,6 +3026,24 @@ to save the current settings. environment area within the total memory of your DataFlash placed at the specified address. +- CONFIG_ENV_IS_IN_REMOTE: + + Define this if you have a remote memory space which you + want to use for the local device's environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines specify the address and size of the + environment area within the remote memory space. The + local device can get the environment from remote memory + space by SRIO or other links. + +BE CAREFUL! For some special cases, the local device can not use +"saveenv" command. For example, the local device will get the +environment stored in a remote NOR flash by SRIO link, but it can +not erase, write this NOR flash by SRIO interface. + - CONFIG_ENV_IS_IN_NAND: Define this if you have a NAND device which you want to use @@ -3462,6 +3480,12 @@ within that device. Specifies that QE/FMAN firmware is located on the primary SPI device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. +- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE + Specifies that QE/FMAN firmware is located in the remote (master) + memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which + can be mapped from slave TLB->slave LAW->slave SRIO outbound window + ->master inbound window->master LAW->the ucode address in master's + NOR flash. Building the Software: ====================== |