diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 26 |
1 files changed, 0 insertions, 26 deletions
@@ -823,16 +823,11 @@ The following options need to be configured: CONFIG_CMD_AES AES 128 CBC encrypt/decrypt CONFIG_CMD_ASKENV * ask for env variable CONFIG_CMD_BDI bdinfo - CONFIG_CMD_BEDBUG * Include BedBug Debugger - CONFIG_CMD_BMP * BMP support - CONFIG_CMD_BSP * Board specific commands CONFIG_CMD_BOOTD bootd CONFIG_CMD_BOOTI * ARM64 Linux kernel Image support CONFIG_CMD_CACHE * icache, dcache - CONFIG_CMD_CLK * clock command support CONFIG_CMD_CONSOLE coninfo CONFIG_CMD_CRC32 * crc32 - CONFIG_CMD_DATE * support for RTC, date/time... CONFIG_CMD_DHCP * DHCP support CONFIG_CMD_DIAG * Diagnostics CONFIG_CMD_DS4510 * ds4510 I2C gpio commands @@ -1549,13 +1544,6 @@ The following options need to be configured: This will also enable the command "fatwrite" enabling the user to write files to FAT. -- CBFS (Coreboot Filesystem) support: - CONFIG_CMD_CBFS - - Define this to enable support for reading from a Coreboot - filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls - and cbfsload. - - FAT(File Allocation Table) filesystem cluster size: CONFIG_FS_FAT_MAX_CLUSTSIZE @@ -1581,7 +1569,6 @@ The following options need to be configured: CONFIG_SYS_DIU_ADDR CONFIG_VIDEO - CONFIG_CMD_BMP CONFIG_CFB_CONSOLE CONFIG_VIDEO_SW_CURSOR CONFIG_VGA_AS_SINGLE_DEVICE @@ -1642,9 +1629,6 @@ The following options need to be configured: 320x240. Black & white. - Normally display is black on white background; define - CONFIG_SYS_WHITE_ON_BLACK to get it inverted. - CONFIG_LCD_ALIGNMENT Normally the LCD is page-aligned (typically 4KB). If this is @@ -2849,16 +2833,6 @@ The following options need to be configured: This enables 'hdmidet' command which returns true if an HDMI monitor is detected. This command is i.MX 6 specific. - CONFIG_CMD_BMODE - This enables the 'bmode' (bootmode) command for forcing - a boot from specific media. - - This is useful for forcing the ROM's usb downloader to - activate upon a watchdog reset which is nice when iterating - on U-Boot. Using the reset button or running bmode normal - will set it back to normal. This command currently - supports i.MX53 and i.MX6. - - bootcount support: CONFIG_BOOTCOUNT_LIMIT |