1 files changed, 0 insertions, 138 deletions
diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c b/arch/arm/cpu/arm926ejs/davinci/misc.c
deleted file mode 100644
index e18bdfc729..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/misc.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Miscelaneous DaVinci functions.
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_BUILD
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size(
-			(void *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_MAX_RAM_BANK_SIZE);
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Read ethernet MAC address from EEPROM for DVEVM compatible boards.
- * Returns 1 if found, 0 otherwise.
- */
-int dvevm_read_mac_address(uint8_t *buf)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
-	/* Read MAC address. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00,
-		CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6))
-		goto i2cerr;
-
-	/* Check that MAC address is valid. */
-	if (!is_valid_ether_addr(buf))
-		goto err;
-
-	return 1; /* Found */
-
-i2cerr:
-	printf("Read from EEPROM @ 0x%02x failed\n",
-		CONFIG_SYS_I2C_EEPROM_ADDR);
-err:
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
-
-	return 0;
-}
-
-/*
- * Set the mii mode as MII or RMII
- */
-#if defined(CONFIG_SOC_DA8XX)
-void davinci_emac_mii_mode_sel(int mode_sel)
-{
-	int val;
-
-	val = readl(&davinci_syscfg_regs->cfgchip3);
-	if (mode_sel == 0)
-		val &= ~(1 << 8);
-	else
-		val |= (1 << 8);
-	writel(val, &davinci_syscfg_regs->cfgchip3);
-}
-#endif
-/*
- * If there is no MAC address in the environment, then it will be initialized
- * (silently) from the value in the EEPROM.
- */
-void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
-{
-	uint8_t env_enetaddr[6];
-	int ret;
-
-	ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr);
-	if (!ret) {
-		/*
-		 * There is no MAC address in the environment, so we
-		 * initialize it from the value in the EEPROM.
-		 */
-		debug("### Setting environment from EEPROM MAC address = "
-			"\"%pM\"\n",
-			env_enetaddr);
-		ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr);
-	}
-	if (!ret)
-		printf("Failed to set mac address from EEPROM: %d\n", ret);
-}
-#endif	/* CONFIG_DRIVER_TI_EMAC */
-
-#if defined(CONFIG_SOC_DA8XX)
-#ifndef CONFIG_USE_IRQ
-void irq_init(void)
-{
-	/*
-	 * Mask all IRQs by clearing the global enable and setting
-	 * the enable clear for all the 90 interrupts.
-	 */
-	writel(0, &davinci_aintc_regs->ger);
-
-	writel(0, &davinci_aintc_regs->hier);
-
-	writel(0xffffffff, &davinci_aintc_regs->ecr1);
-	writel(0xffffffff, &davinci_aintc_regs->ecr2);
-	writel(0xffffffff, &davinci_aintc_regs->ecr3);
-}
-#endif
-
-/*
- * Enable PSC for various peripherals.
- */
-int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
-				    const int n_items)
-{
-	int i;
-
-	for (i = 0; i < n_items; i++)
-		lpsc_on(item[i].lpsc_no);
-
-	return 0;
-}
-#endif